# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool grep diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils snavigator libtool gettext zip fastjar"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake libtool cvssrc fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl apache inet time ash bash bzip2 prms snavigator gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
# directories to be built in a cross environment only
#
-cross_only="target-libgloss target-newlib target-cygmon target-opcodes target-libstub"
+cross_only="target-libgloss target-newlib target-opcodes"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
case ${with_x} in
yes | "") ;; # the default value for this tree is that X11 is available
- no) skipdirs="${skipdirs} tk libgui" ;;
+ no)
+ skipdirs="${skipdirs} tk tix itcl libgui"
+ # We won't be able to build gdbtk without X.
+ enable_gdbtk=no
+ ;;
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
noconfigdirs="$noconfigdirs byacc"
;;
i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix db snavigator gnuserv gettext"
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile apache inet itcl tix db snavigator gnuserv libffi"
+ noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix db snavigator gnuserv libffi"
;;
i[3456]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
- noconfigdirs="expect dejagnu cvs autoconf automake send-pr rcs guile perl texinfo apache inet libtool"
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix db snavigator gnuserv"
+ noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
i[3456]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
+ noconfigdirs="autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="rcs"
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
+ noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix db snavigator gnuserv"
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
;;
frv-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
hppa*-*-*elf* | \
parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
+ hppa*-*-openbsd* | \
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
# Do configure ld/binutils/gas for this case.
;;
i[3456]86-*-coff | i[3456]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
;;
i[34567]86-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
;;
- *-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
;;
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
m68k-*-coff*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
mcore-*-pe*)
# The EPOC C++ environment does not support exceptions or rtti,
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
;;
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
+ ;;
+ powerpc64*-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # not yet ported.
+ noconfigdirs="$noconfigdirs target-libffi"
;;
rs6000-*-lynxos*)
- # The CVS server code doesn't work on the RS/6000
- noconfigdirs="$noconfigdirs target-newlib gprof cvssrc ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
mipstx39-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
;;
mips*-*-linux*)
- noconfigdirs="$noconfigdirs target-libffi"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
sparc-*-elf*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparclite-*-*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
else
use_gnu_ld=no
fi
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
;;
+ *-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- *-*-macos* | \
- *-*-mpw*)
- # Macs want a resource compiler.
- configdirs="$configdirs grez"
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
case "${target}" in
v810*)
- target_makefile_frag="${target_makefile_frag} config/mt-v810"
+ target_makefile_frag="config/mt-v810"
;;
i[3456]86-*-netware*)
- target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ target_makefile_frag="config/mt-netware"
;;
powerpc-*-netware*)
- target_makefile_frag="${target_makefile_frag} config/mt-netware"
- ;;
- alpha*-*-linux*)
- target_makefile_frag="${target_makefile_frag} config/mt-linux"
- target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
- ;;
- alpha*-*-*)
- target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ target_makefile_frag="config/mt-netware"
;;
*-*-linux*)
- target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ target_makefile_frag="config/mt-linux"
;;
*-*-aix4.[3456789]* | *-*-aix[56789].*)
- target_makefile_frag="${target_makefile_frag} config/mt-aix43"
+ target_makefile_frag="config/mt-aix43"
;;
mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="${target_makefile_frag} config/mt-wince"
+ target_makefile_frag="config/mt-wince"
+ ;;
+esac
+
+alphaieee_frag=
+case $target in
+ alpha*-*-*)
+ # This just makes sure to use the -mieee option to build target libs.
+ # This should probably be set individually by each library.
+ alphaieee_frag="config/mt-alphaieee"
;;
esac
# If --enable-target-optspace always use -Os instead of -O2 to build
# the target libraries, similarly if it is not specified, use -Os
# on selected platforms.
+ospace_frag=
case "${enable_target_optspace}:${target}" in
yes:*)
- target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ ospace_frag="config/mt-ospace"
;;
:d30v-*)
- target_makefile_frag="${target_makefile_frag} config/mt-d30v"
+ ospace_frag="config/mt-d30v"
;;
:m32r-* | :d10v-* | :fr30-*)
- target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ ospace_frag="config/mt-ospace"
;;
no:* | :*)
;;
esac
rm -f mt-frag
-if test -n "${target_makefile_frag}" ; then
- for f in ${target_makefile_frag}
+if test -n "${target_makefile_frag}${alphaieee_frag}${ospace_frag}" ; then
+ for f in ${target_makefile_frag} ${alphaieee_frag} ${ospace_frag}
do
cat ${srcdir}/$f >> mt-frag
done
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
+ mips*-*-irix6*o32)
+ with_stabs=yes;
+ withoptions="${withoptions} --with-stabs"
+ ;;
mips*-*-irix6*)
;;
mips*-*-* | alpha*-*-osf*)
fi
if test x${gxx_include_dir} = x; then
if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/g++'
+ gxx_include_dir='${libsubdir}/include/c++'
else
. ${srcdir}/config.if
gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
fi
FLAGS_FOR_TARGET=
-case " $skipdirs " in
-*" target-newlib "*) ;;
-*)
- case " $target_configdirs " in
+case " $target_configdirs " in
*" newlib "*)
case " $targargs " in
*" --with-newlib "*)
;;
esac
;;
- esac
- ;;
esac
# On Canadian crosses, we'll be searching the right directories for
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
fi
-if test "x${use_gnu_ld}" = x && test "x${with_gnu_ld}" != xno &&
+if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:
s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%
s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%
-s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%
-s%^GCJ_FOR_TARGET[ ]*=.*$%GCJ_FOR_TARGET = ${GCJ_FOR_TARGET}%
-s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%
-s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%
+s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = \$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}%
+s%^GCJ_FOR_TARGET[ ]*=.*$%GCJ_FOR_TARGET = \$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}%
+s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = \$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}%
+s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = \$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}%
s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%
s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%
s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%
OSDN Git Service
