libgloss_dir=wince
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-semi-aof )
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
esac
libgloss_dir=cris
;;
- crx-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
- parisc*-*-linux* | hppa*-*-linux*)
+ hppa*-*-linux*)
;;
hppa*-*-*elf* | \
hppa*-*-lites* | \
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
;;
- i370-*-opened*)
- ;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=i386
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
- i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+ i[[3456789]]86-*-interix* )
;;
i[[3456789]]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
unsupported_languages="$unsupported_languages fortran java"
AC_SUBST(poststage1_ldflags)
# Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
pplinc=
+pwllib=
AC_ARG_WITH(ppl,
[AS_HELP_STRING([--with-ppl=PATH],
[AS_HELP_STRING([--with-ppl-lib=PATH],
[specify directory for the installed PPL library])])
-case $with_ppl in
- no)
- ppllibs=
- ;;
- "" | yes)
+AC_ARG_ENABLE(ppl-version-check,
+[AS_HELP_STRING([--disable-ppl-version-check],
+ [disable check for PPL version])])
+
+case $with_ppl in
+ yes | no | "")
;;
*)
- ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl/lib"
pplinc="-I$with_ppl/include $pplinc"
+ if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+ with_ppl=yes
+ else
+ AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
+ fi
;;
esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
pplinc="-I$with_ppl_include $pplinc"
+ with_ppl=yes
fi
+
if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl_lib"
+ with_ppl=yes
fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ if test x"$enable_watchdog" = xyes; then
+ pwllib="-lpwl"
+ fi
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
enable_ppl_version_check=no
+ with_ppl=yes
fi
-AC_ARG_ENABLE(ppl-version-check,
-[AS_HELP_STRING([--disable-ppl-version-check],
- [disable check for PPL version])],
-ENABLE_PPL_CHECK=$enableval,
-ENABLE_PPL_CHECK=yes)
+if test "x$with_ppl" != xno; then
+ if test "x$pwllib" = x; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $ppllibs -lstdc++ -lm"
+ AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"])
+ LIBS="$saved_LIBS"
+ fi
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- AC_MSG_CHECKING([for version 0.10 (or later revision) of PPL])
- AC_TRY_COMPILE([#include "ppl_c.h"],[
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
- choke me
- #endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
- CFLAGS="$saved_CFLAGS"
+ ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+
+ if test "$enable_ppl_version_check" != no; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
+ AC_TRY_COMPILE([#include "ppl_c.h"],[
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
+ CFLAGS="$saved_CFLAGS"
+ fi
fi
# Flags needed for PPL
dnl with user input.
CLOOG_INIT_FLAGS
if test "x$with_ppl" = "xno"; then
+ dnl Only execute fail-action, if CLooG has been requested.
+ CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
+ if test "${graphite_requested}" = yes; then
+ AC_MSG_ERROR([Unable to find a usable PPL. See config.log for details.])
+ fi
with_cloog=no
fi
if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
dnl ignored.
CLOOG_CHECK_VERSION(0,16,1)
- dnl Only execute fail-action, if CLooG has been
- dnl requested.
+ dnl Only execute fail-action, if CLooG has been requested.
CLOOG_IF_FAILED([
- AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
+ AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
fi
# Check for LTO support.
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
baseargs=
+tbaseargs=
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
fi
;;
esac
+ skip_targ=no
+ case $ac_arg in
+changequote(,)
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+changequote([,])
+
+ case $lib in
+ mpc | mpfr | gmp | ppl | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
case "$ac_arg" in
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
keep_next=$separate_arg
;;
*)
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
fi
baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
# Record and document user additions to sub configure arguments.
AC_ARG_VAR([build_configargs],
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
OSDN Git Service
