ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
+ --enable-libssp Builds libssp directory"
+ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
ac_help="$ac_help
--with-gmp=PATH Specify directory for installed GMP library"
ac_help="$ac_help
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build"
+ac_help="$ac_help
--enable-bootstrap[=lean] Enable bootstrapping [no]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:595: checking host system type" >&5
+echo "configure:600: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:616: checking target system type" >&5
+echo "configure:621: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:634: checking build system type" >&5
+echo "configure:639: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:689: checking for a BSD compatible install" >&5
+echo "configure:694: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:742: checking whether ln works" >&5
+echo "configure:747: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:766: checking whether ln -s works" >&5
+echo "configure:771: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
extra_host_args=
-# Define the trigger file to make sure configure will re-run whenever
-# the gcc version number changes.
-
-if test "${with_gcc_version_trigger+set}" = set; then
- gcc_version_trigger=$with_gcc_version_trigger
-else
- gcc_version_trigger=$topsrcdir/gcc/version.c
-fi
-if test -f "${gcc_version_trigger}"; then
- gcc_version_full=`grep version_string "${gcc_version_trigger}" | sed -e 's/.*"\([^"]*\)".*/\1/'`
-else
- gcc_version_full=`$CC -v 2>&1 | sed -n 's/^gcc version //p'`
-fi
-gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
-
-
-
-
-if test -f $gcc_version_trigger ; then
- case "$ac_configure_args" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
- ;;
- esac
-else
- gcc_version_trigger=
-fi
-
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
### (library or tools, host or target), doing a dependency sort.
target-newlib \
target-libstdc++-v3 \
target-libmudflap \
+ target-libssp \
target-libgfortran \
${libgcj} \
target-libobjc \
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
-# Not really a subdirectory, but here for completeness.
-host_subdir=.
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
# No prefix.
target_subdir=${target_noncanonical}
configdirs="$configdirs libtermcap" ;;
esac
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
noconfigdirs="$noconfigdirs gnattools"
fi
+# Check whether --enable-libssp or --disable-libssp was given.
+if test "${enable_libssp+set}" = set; then
+ enableval="$enable_libssp"
+ ENABLE_LIBSSP=$enableval
+else
+ ENABLE_LIBSSP=yes
+fi
+
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+ noconfigdirs="$noconfigdirs target-libssp"
+fi
+
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ ;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
;;
+ m32c-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready. I'm not sure about fileutils.
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
case "${target}" in
- *-*-elf | *-*-aout)
- noconfigdirs="$noconfigdirs ${libgcj}";;
+ *-*-aout)
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ *-*-elf)
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
+ unsupported_languages="$unsupported_languages f95"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+ unsupported_languages="$unsupported_languages f95 java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ ms1-*-*)
+ noconfigdirs="$noconfigdirs sim"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
- host_makefile_frag="config/mh-mingw32"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1804: checking for $ac_word" >&5
+echo "configure:1820: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1834: checking for $ac_word" >&5
+echo "configure:1850: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1885: checking for $ac_word" >&5
+echo "configure:1901: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1917: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1933: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1928 "configure"
+#line 1944 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1959: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1975: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1964: checking whether we are using GNU C" >&5
+echo "configure:1980: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1992: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2008: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2059: checking for $ac_word" >&5
+echo "configure:2075: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2091: checking for $ac_word" >&5
+echo "configure:2107: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2124: checking whether compiler driver understands Ada" >&5
+echo "configure:2140: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
if test x"$errors" = x && test -f conftest.$ac_objext; then
acx_cv_cc_gcc_supports_ada=yes
- break
fi
rm -f conftest.*
fi
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2157: checking how to compare bootstrapped objects" >&5
+echo "configure:2172: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$with_mpfr_dir" != x; then
- gmpinc="-I$with_mpfr_dir/mpfr"
+ gmpinc="-I$with_mpfr_dir"
gmplibs="$with_mpfr_dir/libmpfr.a"
else
gmplibs="-lmpfr"
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2255: checking for correct version of gmp.h" >&5
+echo "configure:2270: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2257 "configure"
+#line 2272 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2281: checking for MPFR" >&5
+echo "configure:2296: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2286 "configure"
+#line 2301 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2294: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
add_this_lang=no
;;
esac
-
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=no
+ ;;
+ esac
+
case $add_this_lang in
no)
# Remove language-dependent dirs.
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
{ echo "configure: error:
-The following requested languages were not found: ${missing_languages}
-The available languages are: ${potential_languages}" 1>&2; exit 1; }
+The following requested languages could not be built: ${missing_languages}
+Recognised languages are: ${potential_languages}" 1>&2; exit 1; }
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
copy_dirs=
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi
+
+
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2781: checking for $ac_word" >&5
+echo "configure:2815: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2816: checking for $ac_word" >&5
+echo "configure:2850: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2851: checking for $ac_word" >&5
+echo "configure:2885: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2886: checking for $ac_word" >&5
+echo "configure:2920: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2921: checking for $ac_word" >&5
+echo "configure:2955: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2956: checking for $ac_word" >&5
+echo "configure:2990: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
esac
-# If no --enable-shared nor --disable-shared is specified, we set up
-# LD_LIBRARY_PATH when we build for gcc.
-case $enable_shared in
-"")
- if test -d ${srcdir}/gcc; then
- set_lib_path=yes
- else
- set_lib_path=no
- fi
- ;;
-*)
- set_lib_path=$enable_shared
- ;;
-esac
-
-# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
-# binutils tools will find libbfd.so.
-case "${set_lib_path}" in
- no) SET_LIB_PATH= ;;
- *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
-esac
-
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# fixed in future. It's still worthwhile to use a cache file for each
# directory. I think.
-# Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
-
-# provide a proper gxx_include_dir.
-
-case "${with_gxx_include_dir}" in
- yes)
- { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
- ;;
- no | "")
- case "${enable_version_specific_runtime_libs}" in
- yes) gxx_include_dir='${libsubdir}/include/c++' ;;
- *)
- libstdcxx_incdir=c++/${gcc_version}
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
- esac ;;
- *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
-
-
-
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}"
FLAGS_FOR_TARGET=
case " $target_configdirs " in
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
if test "x${CC_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+ CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+ GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
else
if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/gcc/gfortran -B$$r/gcc/'
+ GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
GFORTRAN_FOR_TARGET='gfortran'
else
# default whereas gcc does not.
# RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
# all other cases.
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$libstdcxx_flags
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$raw_libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-
# Build module lists & subconfigure args.
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3602: checking for $ac_word" >&5
+echo "configure:3597: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3635: checking for $ac_word" >&5
+echo "configure:3630: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3674: checking for $ac_word" >&5
+echo "configure:3669: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3707: checking for $ac_word" >&5
+echo "configure:3702: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3746: checking for $ac_word" >&5
+echo "configure:3741: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3779: checking for $ac_word" >&5
+echo "configure:3774: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3818: checking for $ac_word" >&5
+echo "configure:3813: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3851: checking for $ac_word" >&5
+echo "configure:3846: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3890: checking for $ac_word" >&5
+echo "configure:3885: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3923: checking for $ac_word" >&5
+echo "configure:3918: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3962: checking for $ac_word" >&5
+echo "configure:3957: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3995: checking for $ac_word" >&5
+echo "configure:3990: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4034: checking for $ac_word" >&5
+echo "configure:4029: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4067: checking for $ac_word" >&5
+echo "configure:4062: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4106: checking for $ac_word" >&5
+echo "configure:4101: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4139: checking for $ac_word" >&5
+echo "configure:4134: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4178: checking for $ac_word" >&5
+echo "configure:4173: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4211: checking for $ac_word" >&5
+echo "configure:4206: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4257: checking for $ac_word" >&5
+echo "configure:4252: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4290: checking for $ac_word" >&5
+echo "configure:4285: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4329: checking for $ac_word" >&5
+echo "configure:4324: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4362: checking for $ac_word" >&5
+echo "configure:4357: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4401: checking for $ac_word" >&5
+echo "configure:4396: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4434: checking for $ac_word" >&5
+echo "configure:4429: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4473: checking for $ac_word" >&5
+echo "configure:4468: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4506: checking for $ac_word" >&5
+echo "configure:4501: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4545: checking for $ac_word" >&5
+echo "configure:4540: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4578: checking for $ac_word" >&5
+echo "configure:4573: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4617: checking for $ac_word" >&5
+echo "configure:4612: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4650: checking for $ac_word" >&5
+echo "configure:4645: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4689: checking for $ac_word" >&5
+echo "configure:4684: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4722: checking for $ac_word" >&5
+echo "configure:4717: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4807: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4802: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4854: checking if symbolic links between directories work" >&5
+echo "configure:4849: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
&& rm -f confdir.s2; then
gcc_cv_prog_ln_s_dir=yes
else
- gcc_cv_prog_ln_s_dir=yes
+ gcc_cv_prog_ln_s_dir=no
fi
rm -rf confdir.s1 confdir.s2
fi
esac
-# If gcc is built natively with shared library enabled, set
-# $RPATH_ENVVAR to make sure the newly built gcc shared librares are
-# used.
-SET_GCC_LIB_PATH=
-if test -d ${srcdir}/gcc && test x${is_cross_compiler} = xno; then
- case "${set_lib_path}" in
- no) ;;
- *)
- eval "d=\$$RPATH_ENVVAR"
- if test x"$d" != x; then
- d="$pwd/gcc:$d"
- else
- d="$pwd/gcc"
- fi
- SET_GCC_LIB_PATH="\$(RPATH_ENVVAR)=$d; export \$(RPATH_ENVVAR);"
- ;;
- esac
-fi
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
# Without the "./", some shells look in PATH for config.status.
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
-s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@gcc_version_full@%$gcc_version_full%g
-s%@gcc_version@%$gcc_version%g
s%@build_subdir@%$build_subdir%g
s%@host_subdir@%$host_subdir%g
s%@target_subdir@%$target_subdir%g
s%@gmplibs@%$gmplibs%g
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
+s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
s%@CONFIGURED_M4@%$CONFIGURED_M4%g
s%@default_target@%$default_target%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
-s%@gxx_include_dir@%$gxx_include_dir%g
-s%@libstdcxx_incdir@%$libstdcxx_incdir%g
/@host_makefile_frag@/r $host_makefile_frag
s%@host_makefile_frag@%%g
/@target_makefile_frag@/r $target_makefile_frag
s%@alphaieee_frag@%%g
/@ospace_frag@/r $ospace_frag
s%@ospace_frag@%%g
-s%@SET_LIB_PATH@%$SET_LIB_PATH%g
s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
-s%@SET_GCC_LIB_PATH@%$SET_GCC_LIB_PATH%g
CEOF
EOF
OSDN Git Service
