enable_option_checking
with_build_libsubdir
enable_gold
+enable_ld
+enable_libquadmath
+enable_libquadmath_support
enable_libada
enable_libssp
enable_build_with_cxx
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]
+ --enable-gold[=ARG] build gold [ARG={default,yes,no}]
+ --enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --disable-libquadmath do not build libquadmath directory
+ --disable-libquadmath-support
+ disable libquadmath support for Fortran
--enable-libada build libada directory
--enable-libssp build libssp directory
--enable-build-with-cxx build with C++ compiler instead of C compiler
- --disable-ppl-version-check disable check for PPL version
+ --disable-ppl-version-check
+ disable check for PPL version
--enable-cloog-backend[=BACKEND]
set the CLooG BACKEND used to either isl, ppl or
ppl-legacy (default)
--disable-cloog-version-check
disable check for CLooG version
--enable-lto enable link time optimization support
- --enable-stage1-languages[=all] choose additional languages to build during
- stage1. Mostly useful for compiler development.
- --enable-objc-gc enable use of Boehm's garbage collector with the
- GNU Objective-C runtime
+ --enable-stage1-languages[=all]
+ choose additional languages to build during stage1.
+ Mostly useful for compiler development
+ --enable-objc-gc enable use of Boehm's garbage collector with the GNU
+ Objective-C runtime
--enable-bootstrap enable bootstrapping [yes if native build]
--enable-serial-[{host,target,build}-]configure
- force sequential configuration of
- sub-packages for the host, target or build
- machine, or all sub-packages
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- --enable-stage1-checking[=all] choose additional checking for stage1
- of the compiler
+ force sequential configuration of sub-packages for
+ the host, target or build machine, or all
+ sub-packages
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-stage1-checking[=all]
+ choose additional checking for stage1 of the
+ compiler
--enable-werror enable -Werror in bootstrap stage2 and later
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
- --with-mpc=PATH specify prefix directory for installed MPC package.
- Equivalent to --with-mpc-include=PATH/include
- plus --with-mpc-lib=PATH/lib
- --with-mpc-include=PATH
- specify directory for installed MPC include files
- --with-mpc-lib=PATH specify directory for the installed MPC library
+ --with-mpc=PATH specify prefix directory for installed MPC package.
+ Equivalent to --with-mpc-include=PATH/include plus
+ --with-mpc-lib=PATH/lib
+ --with-mpc-include=PATH specify directory for installed MPC include files
+ --with-mpc-lib=PATH specify directory for the installed MPC library
--with-mpfr-dir=PATH this option has been REMOVED
--with-mpfr=PATH specify prefix directory for installed MPFR package.
- Equivalent to --with-mpfr-include=PATH/include
- plus --with-mpfr-lib=PATH/lib
+ Equivalent to --with-mpfr-include=PATH/include plus
+ --with-mpfr-lib=PATH/lib
--with-mpfr-include=PATH
specify directory for installed MPFR include files
--with-mpfr-lib=PATH specify directory for the installed MPFR library
--with-gmp-dir=PATH this option has been REMOVED
- --with-gmp=PATH specify prefix directory for the installed GMP package.
- Equivalent to --with-gmp-include=PATH/include
- plus --with-gmp-lib=PATH/lib
+ --with-gmp=PATH specify prefix directory for the installed GMP
+ package. Equivalent to
+ --with-gmp-include=PATH/include plus
+ --with-gmp-lib=PATH/lib
--with-gmp-include=PATH specify directory for installed GMP include files
--with-gmp-lib=PATH specify directory for the installed GMP library
- --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
- when linking with PPL
- --with-stage1-ldflags=FLAGS Linker flags for stage1
- -with-stage1-libs=LIBS Libraries for stage1
- --with-boot-libs=LIBS Libraries for stage2 and later
- --with-boot-ldflags=FLAGS Linker flags for stage2 and later
- --with-ppl=PATH Specify prefix directory for the installed PPL package
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib
- --with-ppl-include=PATH Specify directory for installed PPL include files
- --with-ppl-lib=PATH Specify the directory for the installed PPL library
+ --with-host-libstdcxx=L use linker arguments L to link with libstdc++ when
+ linking with PPL
+ --with-stage1-ldflags=FLAGS
+ linker flags for stage1
+ --with-stage1-libs=LIBS libraries for stage1
+ --with-boot-libs=LIBS libraries for stage2 and later
+ --with-boot-ldflags=FLAGS
+ linker flags for stage2 and later
+ --with-ppl=PATH specify prefix directory for the installed PPL
+ package. Equivalent to
+ --with-ppl-include=PATH/include plus
+ --with-ppl-lib=PATH/lib
+ --with-ppl-include=PATH specify directory for installed PPL include files
+ --with-ppl-lib=PATH specify directory for the installed PPL library
--with-cloog=PATH Specify prefix directory for the installed CLooG-PPL
package. Equivalent to
--with-cloog-include=PATH/include plus
--with-build-sysroot=SYSROOT
use sysroot as the system root during the build
--with-debug-prefix-map='A=B C=D ...'
- map A to B, C to D ... in debug information
---with-build-config='NAME NAME2...'
- Use config/NAME.mk build configuration
+ map A to B, C to D ... in debug information
+ --with-build-config='NAME NAME2...'
+ use config/NAME.mk build configuration
--with-build-time-tools=PATH
use given path to find target tools during the build
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
-# Handle --enable-gold.
-# --enable-gold Build only gold
-# --disable-gold [default] Build only ld
-# --enable-gold=both Build both gold and ld, ld is default
-# --enable-gold=both/ld Same
-# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
-
+# Handle --enable-gold, --enable-ld.
+# --disable-gold [--enable-ld]
+# Build only ld. Default option.
+# --enable-gold [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold", install ld
+# as "ld.bfd" and "ld".
+# --enable-gold=default [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold" and "ld",
+# install ld as "ld.bfd".
+# --enable-gold[=default] --disable-ld
+# Build only gold, which is then installed as both "ld.gold" and "ld".
+# --enable-gold --enable-ld=default
+# Build both gold (installed as "ld.gold") and ld (installed as "ld"
+# and ld.bfd).
+# In other words, ld is default
+# --enable-gold=default --enable-ld=default
+# Error.
+
+default_ld=
# Check whether --enable-gold was given.
if test "${enable_gold+set}" = set; then :
enableval=$enable_gold; ENABLE_GOLD=$enableval
ENABLE_GOLD=no
fi
- case "${ENABLE_GOLD}" in
- yes|both|both/gold|both/ld)
+case "${ENABLE_GOLD}" in
+ yes|default)
# Check for ELF target.
is_elf=no
case "${target}" in
# Check for target supported by gold.
case "${target}" in
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- case "${ENABLE_GOLD}" in
- both*)
- configdirs="$configdirs gold"
- ;;
- *)
- configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
- ;;
- esac
+ configdirs="$configdirs gold"
+ if test x${ENABLE_GOLD} = xdefault; then
+ default_ld=gold
+ fi
ENABLE_GOLD=yes
;;
esac
*)
as_fn_error "invalid --enable-gold argument" "$LINENO" 5
;;
- esac
+esac
+
+# Check whether --enable-ld was given.
+if test "${enable_ld+set}" = set; then :
+ enableval=$enable_ld; ENABLE_LD=$enableval
+else
+ ENABLE_LD=yes
+fi
+
+
+case "${ENABLE_LD}" in
+ default)
+ if test x${default_ld} != x; then
+ as_fn_error "either gold or ld can be the default ld" "$LINENO" 5
+ fi
+ ;;
+ yes)
+ ;;
+ no)
+ if test x${ENABLE_GOLD} != xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: neither ld nor gold are enabled" >&5
+$as_echo "$as_me: WARNING: neither ld nor gold are enabled" >&2;}
+ fi
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
+ ;;
+ *)
+ as_fn_error "invalid --enable-ld argument" "$LINENO" 5
+ ;;
+esac
# Configure extra directories which are host specific
esac
+# Check whether --enable-libquadmath was given.
+if test "${enable_libquadmath+set}" = set; then :
+ enableval=$enable_libquadmath; ENABLE_LIBQUADMATH=$enableval
+else
+ ENABLE_LIBQUADMATH=yes
+fi
+
+if test "${ENABLE_LIBQUADMATH}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libquadmath"
+fi
+
+
+# Check whether --enable-libquadmath-support was given.
+if test "${enable_libquadmath_support+set}" = set; then :
+ enableval=$enable_libquadmath_support; ENABLE_LIBQUADMATH_SUPPORT=$enableval
+else
+ ENABLE_LIBQUADMATH_SUPPORT=yes
+fi
+
+enable_libquadmath_support=
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
+ enable_libquadmath_support=no
+fi
+
+
# Check whether --enable-libada was given.
if test "${enable_libada+set}" = set; then :
enableval=$enable_libada; ENABLE_LIBADA=$enableval
;;
no)
# Make sure we get it printed in the list of not supported target libs.
- noconfigdirs="$noconfigdirs ${libgcj}"
+ # Don't disable libffi, though, other languages use it.
+ noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+ # Clear libgcj_saved so that even if java is enabled libffi won't be
+ # built.
+ libgcj_saved=
;;
esac
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc gdb"
+ noconfigdirs="$noconfigdirs target-boehm-gc"
if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
*-*-aout)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf)
- noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-elf) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
fi
else
poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically. But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically. But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi
fi
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
+ enabled_target_libs=
+ disabled_target_libs=
+
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
case $add_this_lang in
unsupported)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
;;
no)
# Remove language-dependent dirs; still show language as supported.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
potential_languages="${potential_languages}${language},"
;;
yes)
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ enabled_target_libs="$enabled_target_libs $target_libs"
case "${boot_language}:,$enable_stage1_languages," in
yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
# Add to (comma-separated) list of stage 1 languages.
esac
done
+ # Add target libraries which are only needed for disabled languages
+ # to noconfigdirs.
+ if test -n "$disabled_target_libs"; then
+ for dir in $disabled_target_libs; do
+ case " $enabled_target_libs " in
+ *" ${dir} "*) ;;
+ *) noconfigdirs="$noconfigdirs $dir" ;;
+ esac
+ done
+ fi
+
# Check whether --enable-stage1-languages was given.
if test "${enable_stage1_languages+set}" = set; then :
enableval=$enable_stage1_languages; case ,${enable_stage1_languages}, in
esac
if test $ok = yes; then
# An in-tree tool is available and we can use it
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
OSDN Git Service
