ac_help="$ac_help
--enable-libssp Builds libssp directory"
ac_help="$ac_help
+ --with-datarootdir Use datarootdir as the data root directory."
+ac_help="$ac_help
+ --with-docdir Install documentation in this directory."
+ac_help="$ac_help
+ --with-htmldir Install html in this directory."
+ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
sub-packages for the host, target or build
machine, or all sub-packages"
ac_help="$ac_help
+ --with-build-time-tools=path
+ use given path to find target tools during the build"
+ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:600: checking host system type" >&5
+echo "configure:609: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:621: checking target system type" >&5
+echo "configure:630: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:639: checking build system type" >&5
+echo "configure:648: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:694: checking for a BSD compatible install" >&5
+echo "configure:703: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:747: checking whether ln works" >&5
+echo "configure:756: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:771: checking whether ln -s works" >&5
+echo "configure:780: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Some tools are only suitable for building in a "native" situation.
# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
# Similarly, some are only suitable for cross toolchains.
# Remove these if host=target.
fi
if test "${ENABLE_LIBADA}" != "yes" ; then
- noconfigdirs="$noconfigdirs target-libada"
noconfigdirs="$noconfigdirs gnattools"
fi
ENABLE_LIBSSP=yes
fi
-if test "${ENABLE_LIBSSP}" != "yes" ; then
- noconfigdirs="$noconfigdirs target-libssp"
-fi
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
esac
-# Allow --disable-libmudflap to exclude target-libmudflap
-case $enable_libmudflap in
-yes)
- ;;
-no)
- noconfigdirs="$noconfigdirs target-libmudflap"
- ;;
-"")
+# Disable libmudflap on some systems.
+if test x$enable_libmudflap = x ; then
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
# Enable libmudflap by default in GNU and friends.
noconfigdirs="$noconfigdirs target-libmudflap"
;;
esac
-esac
+fi
-# Allow --disable-libgomp to exclude target-libgomp
-case $enable_libgomp in
-yes)
- ;;
-no)
- noconfigdirs="$noconfigdirs target-libgomp"
- ;;
-"")
+# Disable libgomp on non POSIX hosted systems.
+if test x$enable_libgomp = x ; then
# Enable libgomp by default on hosted POSIX systems.
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
;;
*-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
;;
- *-*-darwin*)
+ *-*-darwin* | *-*-aix*)
;;
*)
noconfigdirs="$noconfigdirs target-libgomp"
;;
esac
-esac
+fi
case "${target}" in
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- m32c-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready. I'm not sure about fileutils.
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ hppa*-hp-hpux11*)
+ noconfigdirs="$noconfigdirs ld shellutils"
+ ;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
i[3456789]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
+ i[3456789]86-*-rdos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ ;;
m32r-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- BUILD_PREFIX=${build_alias}-
- BUILD_PREFIX_1=${build_alias}-
else
# Set reasonable default values for some tools even if not Canadian.
# This is all going to change when we autoconfiscate...
CC_FOR_BUILD="\$(CC)"
- BUILD_PREFIX=
- BUILD_PREFIX_1=loser-
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1856: checking for $ac_word" >&5
+echo "configure:1847: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1886: checking for $ac_word" >&5
+echo "configure:1877: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1937: checking for $ac_word" >&5
+echo "configure:1928: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1969: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1960: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1980 "configure"
+#line 1971 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2011: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2002: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2016: checking whether we are using GNU C" >&5
+echo "configure:2007: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2025: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2016: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2044: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2035: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2111: checking for $ac_word" >&5
+echo "configure:2102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2143: checking for $ac_word" >&5
+echo "configure:2134: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2176: checking whether compiler driver understands Ada" >&5
+echo "configure:2167: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2208: checking how to compare bootstrapped objects" >&5
+echo "configure:2199: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+# Check for html and install-html
+# Check whether --with-datarootdir or --without-datarootdir was given.
+if test "${with_datarootdir+set}" = set; then
+ withval="$with_datarootdir"
+ datarootdir="\${prefix}/${withval}"
+else
+ datarootdir="\${prefix}/share"
+fi
+
+
+# Check whether --with-docdir or --without-docdir was given.
+if test "${with_docdir+set}" = set; then
+ withval="$with_docdir"
+ docdir="\${prefix}/${withval}"
+else
+ docdir="\${datarootdir}/doc"
+fi
+
+
+# Check whether --with-htmldir or --without-htmldir was given.
+if test "${with_htmldir+set}" = set; then
+ withval="$with_htmldir"
+ htmldir="\${prefix}/${withval}"
+else
+ htmldir="\${docdir}"
+fi
+
+
+
+
+
+
# Check for GMP and MPFR
gmplibs=
gmpinc=
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2306: checking for correct version of gmp.h" >&5
+echo "configure:2329: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2308 "configure"
+#line 2331 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2342: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2332: checking for MPFR" >&5
+echo "configure:2355: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2337 "configure"
+#line 2360 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
rm -f conftest*
LIBS="$saved_LIBS"
- CFLAGS="$saved_CFLAGS"
fi
+CFLAGS="$saved_CFLAGS"
# Flags needed for both GMP and/or MPFR
ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+ if eval test x\${enable_${dirname}} "=" xno ; then
+ noconfigdirs="$noconfigdirs $dir"
+ fi
+done
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
fi
fi
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
shift; shift
done
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i3456786-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i3456786-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv45* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
;;
esac
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
-fi
-
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
-fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+ m32c-*-* )
+ if test -d ${srcdir}/libgloss/m32c; then
+ # This is for crt0.o
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for r8c.ld
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for libnosys.a
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ fi
+ ;;
+esac
+
# Makefile fragments.
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
-
-
# Build module lists & subconfigure args.
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3341: checking for $ac_word" >&5
+echo "configure:3433: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3381: checking for $ac_word" >&5
+echo "configure:3473: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3420: checking for $ac_word" >&5
+echo "configure:3512: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3459: checking for $ac_word" >&5
+echo "configure:3551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3499: checking for $ac_word" >&5
+echo "configure:3591: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3538: checking for $ac_word" >&5
+echo "configure:3630: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
*)
- # For an installed makeinfo, we require it to be from texinfo 4.2 or
+ # For an installed makeinfo, we require it to be from texinfo 4.4 or
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
:
else
MAKEINFO="$MISSING makeinfo"
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3591: checking for $ac_word" >&5
+echo "configure:3683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3632: checking for $ac_word" >&5
+echo "configure:3724: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3680: checking for $ac_word" >&5
+echo "configure:3772: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3711: checking for $ac_word" >&5
+echo "configure:3803: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3755: checking for $ac_word" >&5
+echo "configure:3847: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3786: checking for $ac_word" >&5
+echo "configure:3878: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3830: checking for $ac_word" >&5
+echo "configure:3922: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3861: checking for $ac_word" >&5
+echo "configure:3953: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3905: checking for $ac_word" >&5
+echo "configure:3997: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3936: checking for $ac_word" >&5
+echo "configure:4028: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3980: checking for $ac_word" >&5
+echo "configure:4072: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4011: checking for $ac_word" >&5
+echo "configure:4103: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4055: checking for $ac_word" >&5
+echo "configure:4147: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4086: checking for $ac_word" >&5
+echo "configure:4178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4130: checking for $ac_word" >&5
+echo "configure:4222: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4161: checking for $ac_word" >&5
+echo "configure:4253: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4200: checking for $ac_word" >&5
+echo "configure:4292: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4231: checking for $ac_word" >&5
+echo "configure:4323: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4270: checking for $ac_word" >&5
+echo "configure:4362: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4301: checking for $ac_word" >&5
+echo "configure:4393: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4345: checking for $ac_word" >&5
+echo "configure:4437: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4376: checking for $ac_word" >&5
+echo "configure:4468: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4420: checking for $ac_word" >&5
+echo "configure:4512: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4451: checking for $ac_word" >&5
+echo "configure:4543: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Target tools.
- for ncn_progname in ar; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+# Check whether --with-build-time-tools or --without-build-time-tools was given.
+if test "${with_build_time_tools+set}" = set; then
+ withval="$with_build_time_tools"
+ case x"$withval" in
+ x/*) ;;
+ *)
+ with_build_time_tools=
+ echo "configure: warning: argument to --with-build-time-tools must be an absolute path" 1>&2
+ ;;
+ esac
+else
+ with_build_time_tools=
+fi
+
+
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in cc gcc; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4607: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4502: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4624: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4533: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4655: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_AR_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
- set dummy ar
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ set dummy cc gcc
if test $build = $target ; then
- AR_FOR_TARGET="$2"
+ CC_FOR_TARGET="$2"
else
- AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in as; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4698: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4577: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4715: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4608: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4746: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_AS_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
- set dummy as
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ set dummy c++ g++ cxx gxx
if test $build = $target ; then
- AS_FOR_TARGET="$2"
+ CXX_FOR_TARGET="$2"
else
- AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in cc gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gcc; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4789: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4652: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4806: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC_FOR_TARGET"; then
- ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
-if test -n "$CC_FOR_TARGET"; then
- echo "$ac_t""$CC_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4683: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4837: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC_FOR_TARGET"; then
- ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
-if test -n "$CC_FOR_TARGET"; then
- echo "$ac_t""$CC_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_CC_FOR_TARGET" && break
-done
+ fi
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
+fi
-if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
- set dummy cc gcc
- if test $build = $target ; then
- CC_FOR_TARGET="$2"
- else
- CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gcj; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4875: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
fi
- for ncn_progname in c++ g++ cxx gxx; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4727: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4892: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CXX_FOR_TARGET"; then
- ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
-if test -n "$CXX_FOR_TARGET"; then
- echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4758: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4923: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CXX_FOR_TARGET"; then
- ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
-if test -n "$CXX_FOR_TARGET"; then
- echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
- set dummy c++ g++ cxx gxx
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
if test $build = $target ; then
- CXX_FOR_TARGET="$2"
+ GCJ_FOR_TARGET="$2"
else
- CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
fi
- for ncn_progname in dlltool; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gfortran; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4966: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4802: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4983: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4833: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5014: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
+ else
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
- set dummy dlltool
- if test $build = $target ; then
- DLLTOOL_FOR_TARGET="$2"
+
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
else
- DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ PATH_SEPARATOR=:
fi
+ rm -f conf$$.sh
+fi
+
+
+
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
fi
- for ncn_progname in gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+
+
+cat > conftest.c << \EOF
+#ifdef __GNUC__
+ gcc_yay;
+#endif
+EOF
+if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
+ have_gcc_for_target=yes
+else
+ GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
+ have_gcc_for_target=no
+fi
+rm conftest.c
+
+
+
+
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5121: checking for ar in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/ar; then
+ AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
+ ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ AR_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ar`
+ test $AR_FOR_TARGET=ar && AR_FOR_TARGET=
+ ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5139: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$AR_FOR_TARGET" in
+ /*)
+ ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_AR_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+AR_FOR_TARGET="$ac_cv_path_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ar; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5176: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4877: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5193: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-if test -n "$GCC_FOR_TARGET"; then
- echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4908: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5224: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-if test -n "$GCC_FOR_TARGET"; then
- echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
+ if test $build = $target ; then
+ AR_FOR_TARGET="$2"
+ else
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
- GCC_FOR_TARGET="${CC_FOR_TARGET}"
+else
+ AR_FOR_TARGET=$ac_cv_path_AR_FOR_TARGET
fi
- for ncn_progname in gcj; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+
+
+
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5274: checking for as in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/as; then
+ AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
+ ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ AS_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=as`
+ test $AS_FOR_TARGET=as && AS_FOR_TARGET=
+ ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5292: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$AS_FOR_TARGET" in
+ /*)
+ ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_AS_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+AS_FOR_TARGET="$ac_cv_path_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in as; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5329: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4947: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5346: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4978: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5377: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
+ else
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ AS_FOR_TARGET=$ac_cv_path_AS_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5427: checking for dlltool in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/dlltool; then
+ DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
+ ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_DLLTOOL_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ DLLTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=dlltool`
+ test $DLLTOOL_FOR_TARGET=dlltool && DLLTOOL_FOR_TARGET=
+ ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5445: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$DLLTOOL_FOR_TARGET" in
+ /*)
+ ac_cv_path_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_DLLTOOL_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+DLLTOOL_FOR_TARGET="$ac_cv_path_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in dlltool; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5482: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5499: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
- set dummy gcj
- if test $build = $target ; then
- GCJ_FOR_TARGET="$2"
- else
- GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
-fi
- for ncn_progname in gfortran; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5022: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5530: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
-if test -n "$GFORTRAN_FOR_TARGET"; then
- echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
+ if test $build = $target ; then
+ DLLTOOL_FOR_TARGET="$2"
+ else
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ DLLTOOL_FOR_TARGET=$ac_cv_path_DLLTOOL_FOR_TARGET
+fi
+
+
+
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5580: checking for ld in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/ld; then
+ LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
+ ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LD_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ld`
+ test $LD_FOR_TARGET=ld && LD_FOR_TARGET=
+ ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
fi
- if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5053: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5598: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
-else
+ case "$LD_FOR_TARGET" in
+ /*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ ac_cv_path_LD_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ ;;
+esac
fi
-fi
-GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
-if test -n "$GFORTRAN_FOR_TARGET"; then
- echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_path_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
-done
-if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
- set dummy gfortran
- if test $build = $target ; then
- GFORTRAN_FOR_TARGET="$2"
- else
- GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ld; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5635: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
fi
- for ncn_progname in ld; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5097: checking for $ac_word" >&5
+echo "configure:5652: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5128: checking for $ac_word" >&5
+echo "configure:5683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_LD_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
set dummy ld
if test $build = $target ; then
fi
fi
- for ncn_progname in lipo; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+else
+ LD_FOR_TARGET=$ac_cv_path_LD_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5733: checking for lipo in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/lipo; then
+ LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_LIPO_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LIPO_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=lipo`
+ test $LIPO_FOR_TARGET=lipo && LIPO_FOR_TARGET=
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5751: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$LIPO_FOR_TARGET" in
+ /*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_LIPO_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+LIPO_FOR_TARGET="$ac_cv_path_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in lipo; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5788: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5172: checking for $ac_word" >&5
+echo "configure:5805: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5203: checking for $ac_word" >&5
+echo "configure:5836: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
set dummy lipo
if test $build = $target ; then
fi
fi
- for ncn_progname in nm; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+else
+ LIPO_FOR_TARGET=$ac_cv_path_LIPO_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5886: checking for nm in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/nm; then
+ NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
+ test $NM_FOR_TARGET=nm && NM_FOR_TARGET=
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5904: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$NM_FOR_TARGET" in
+ /*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_NM_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+NM_FOR_TARGET="$ac_cv_path_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in nm; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5941: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5247: checking for $ac_word" >&5
+echo "configure:5958: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5278: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5989: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
+ if test $build = $target ; then
+ NM_FOR_TARGET="$2"
+ else
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6039: checking for objdump in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/objdump; then
+ OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_OBJDUMP_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJDUMP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objdump`
+ test $OBJDUMP_FOR_TARGET=objdump && OBJDUMP_FOR_TARGET=
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6057: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
-else
+ case "$OBJDUMP_FOR_TARGET" in
+ /*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ ac_cv_path_OBJDUMP_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ ;;
+esac
fi
-fi
-NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
-if test -n "$NM_FOR_TARGET"; then
- echo "$ac_t""$NM_FOR_TARGET" 1>&6
+OBJDUMP_FOR_TARGET="$ac_cv_path_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_NM_FOR_TARGET" && break
-done
-if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
- set dummy nm
- if test $build = $target ; then
- NM_FOR_TARGET="$2"
- else
- NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in objdump; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6094: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
fi
- for ncn_progname in objdump; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
+ for ncn_progname in objdump; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5322: checking for $ac_word" >&5
+echo "configure:6111: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5353: checking for $ac_word" >&5
+echo "configure:6142: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
set dummy objdump
if test $build = $target ; then
fi
fi
- for ncn_progname in ranlib; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+else
+ OBJDUMP_FOR_TARGET=$ac_cv_path_OBJDUMP_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6192: checking for ranlib in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/ranlib; then
+ RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ RANLIB_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ranlib`
+ test $RANLIB_FOR_TARGET=ranlib && RANLIB_FOR_TARGET=
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6210: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$RANLIB_FOR_TARGET" in
+ /*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_RANLIB_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+RANLIB_FOR_TARGET="$ac_cv_path_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ranlib; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6247: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5397: checking for $ac_word" >&5
+echo "configure:6264: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5428: checking for $ac_word" >&5
+echo "configure:6295: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ set dummy ranlib
+ if test $build = $target ; then
+ RANLIB_FOR_TARGET="$2"
+ else
+ RANLIB_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
- RANLIB_FOR_TARGET=":"
+else
+ RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET
fi
- for ncn_progname in strip; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+
+
+
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6345: checking for strip in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/strip; then
+ STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ STRIP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=strip`
+ test $STRIP_FOR_TARGET=strip && STRIP_FOR_TARGET=
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6363: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$STRIP_FOR_TARGET" in
+ /*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_STRIP_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+STRIP_FOR_TARGET="$ac_cv_path_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in strip; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6400: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5467: checking for $ac_word" >&5
+echo "configure:6417: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5498: checking for $ac_word" >&5
+echo "configure:6448: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
set dummy strip
if test $build = $target ; then
fi
fi
- for ncn_progname in windres; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+else
+ STRIP_FOR_TARGET=$ac_cv_path_STRIP_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6498: checking for windres in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/windres; then
+ WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_WINDRES_FOR_TARGET" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ WINDRES_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windres`
+ test $WINDRES_FOR_TARGET=windres && WINDRES_FOR_TARGET=
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6516: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$WINDRES_FOR_TARGET" in
+ /*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_WINDRES_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+WINDRES_FOR_TARGET="$ac_cv_path_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in windres; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6553: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5542: checking for $ac_word" >&5
+echo "configure:6570: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5573: checking for $ac_word" >&5
+echo "configure:6601: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
set dummy windres
if test $build = $target ; then
fi
fi
+else
+ WINDRES_FOR_TARGET=$ac_cv_path_WINDRES_FOR_TARGET
+fi
+
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:5616: checking where to find the target ar" >&5
+echo "configure:6649: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AR_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AR_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AR_FOR_TARGET='$(AR)'
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:5641: checking where to find the target as" >&5
+echo "configure:6682: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AS_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AS_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AS_FOR_TARGET='$(AS)'
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:5666: checking where to find the target cc" >&5
+echo "configure:6715: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CC_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CC_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CC_FOR_TARGET='$(CC)'
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:5691: checking where to find the target c++" >&5
+echo "configure:6748: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CXX_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CXX_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CXX_FOR_TARGET='$(CXX)'
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:5719: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6784: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RAW_CXX_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RAW_CXX_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RAW_CXX_FOR_TARGET='$(CXX)'
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:5747: checking where to find the target dlltool" >&5
+echo "configure:6820: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $DLLTOOL_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $DLLTOOL_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:5772: checking where to find the target gcc" >&5
+echo "configure:6853: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCC_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCC_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCC_FOR_TARGET='$()'
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:5797: checking where to find the target gcj" >&5
+echo "configure:6886: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCJ_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCJ_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCJ_FOR_TARGET='$(GCJ)'
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:5825: checking where to find the target gfortran" >&5
+echo "configure:6922: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GFORTRAN_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GFORTRAN_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GFORTRAN_FOR_TARGET='$(GFORTRAN)'
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:5853: checking where to find the target ld" >&5
+echo "configure:6958: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LD_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LD_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
LD_FOR_TARGET='$(LD)'
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:5878: checking where to find the target lipo" >&5
+echo "configure:6991: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LIPO_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
- if test "x$target" = "x$host"; then
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LIPO_FOR_TARGET`" 1>&6
+ elif test "x$target" = "x$host"; then
# We can use an host tool
LIPO_FOR_TARGET='$(LIPO)'
echo "$ac_t""host tool" 1>&6
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:5893: checking where to find the target nm" >&5
+echo "configure:7014: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $NM_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $NM_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
NM_FOR_TARGET='$(NM)'
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:5918: checking where to find the target objdump" >&5
+echo "configure:7047: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $OBJDUMP_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $OBJDUMP_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:5943: checking where to find the target ranlib" >&5
+echo "configure:7080: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RANLIB_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RANLIB_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RANLIB_FOR_TARGET='$(RANLIB)'
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:5968: checking where to find the target strip" >&5
+echo "configure:7113: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $STRIP_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $STRIP_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
STRIP_FOR_TARGET='$(STRIP)'
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:5993: checking where to find the target windres" >&5
+echo "configure:7146: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $WINDRES_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $WINDRES_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
WINDRES_FOR_TARGET='$(WINDRES)'
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6046: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7207: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
s%@CC@%$CC%g
s%@GNATBIND@%$GNATBIND%g
s%@do_compare@%$do_compare%g
+s%@datarootdir@%$datarootdir%g
+s%@docdir@%$docdir%g
+s%@htmldir@%$htmldir%g
s%@gmplibs@%$gmplibs%g
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
/@ospace_frag@/r $ospace_frag
s%@ospace_frag@%%g
s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
-s%@BUILD_PREFIX@%$BUILD_PREFIX%g
-s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
s%@tooldir@%$tooldir%g
s%@build_tooldir@%$build_tooldir%g
s%@CONFIGURE_GDB_TK@%$CONFIGURE_GDB_TK%g
s%@host_configargs@%$host_configargs%g
s%@configdirs@%$configdirs%g
s%@target_configargs@%$target_configargs%g
-s%@target_configdirs@%$target_configdirs%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@config_shell@%$config_shell%g
s%@YACC@%$YACC%g
s%@OBJDUMP@%$OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
s%@LIPO_FOR_TARGET@%$LIPO_FOR_TARGET%g
s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
OSDN Git Service
