ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --disable-serial-[{host,target,build}-]configure
+ Don't force sequential configuration of
+ sub-packages for the host, target or build
+ machine, or of any sub-packages at all"
# Initialize some variables set by options.
# The variables have the same names as the options, with
fi
+
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:572: checking host system type" >&5
+echo "configure:578: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:593: checking target system type" >&5
+echo "configure:599: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:611: checking build system type" >&5
+echo "configure:617: checking build system type" >&5
build_alias=$build
case "$build_alias" in
-
-
# clear some things potentially inherited from environment.
enable_threads=no
# Export original configure arguments for use by sub-configures.
TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
-export TOPLEVEL_CONFIGURE_ARGUMENTS
+
moveifchange=${srcdir}/move-if-change
;;
* )
# Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="--with-gcc-version-trigger=$gcc_version_trigger $ac_configure_args"
+ ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
;;
esac
fi
target-newlib \
${libstdcxx_version} \
target-libf2c \
- ${libgcj}
+ ${libgcj} \
target-libobjc"
# these tools are built using the target libs, and are intended to run only
noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
;;
mips*-*-irix6*)
- # The GNU assembler does not support IRIX 6.
# Linking libjava exceeds command-line length limits on at least
# IRIX 6.2, but not on IRIX 6.5.
# Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
# <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs gas gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
fi
fi
-# Deconfigure all subdirectories, in case we are changing the
-# configuration from one where a subdirectory is supported to one where it
-# is not.
-if test -z "${norecursion}" && test -n "${configdirs}" ; then
- for i in `echo ${configdirs} | sed -e s/target-//g` ; do
- rm -f $i/Makefile
- done
-fi
-if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- rm -f ${target_subdir}/$i/Makefile
- done
-fi
-
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
YACC="\$(USUAL_YACC)"
# If CC is still not set, try to get gcc.
+ cc_prog_is_gcc=
if test -z "${CC}" ; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/gcc; then
CC="gcc"
+ cc_prog_is_gcc=yes
echo 'void f(){}' > conftest.c
if test -z "`${CC} -g -c conftest.c 2>&1`"; then
CFLAGS=${CFLAGS-"-g -O2"}
IFS="$save_ifs"
CC=${CC-cc}
else
+ # Determine if we are using gcc.
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+ if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
+ cc_prog_is_gcc=yes
+ fi
+ rm -f conftest.c
if test -z "${CFLAGS}"; then
# Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
# is set to a version of gcc.
- case "${CC}" in
- *gcc)
+ if test "$cc_prog_is_gcc" = yes; then
echo 'void f(){}' > conftest.c
if test -z "`${CC} -g -c conftest.c 2>&1`"; then
CFLAGS=${CFLAGS-"-g -O2"}
CXXFLAGS=${CXXFLAGS-"-O2"}
fi
rm -f conftest*
- ;;
+ fi
+ fi
+ fi
+
+ # We must set the default linker to the linker used by gcc for the correct
+ # operation of libtool. If LD is not defined and we are using gcc, try to
+ # set the LD default to the ld used by gcc.
+ if test -z "$LD"; then
+ if test "$cc_prog_is_gcc" = yes; then
+ case $build in
+ *-*-mingw*)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+ *)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+ esac
+ case $gcc_prog_ld in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ LD="$gcc_prog_ld" ;;
esac
fi
fi
# This is the final value for target_configdirs. configdirs already
# has its final value. It's time to create some lists of valid targets.
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, such that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
all_build_modules=
configure_build_modules=
# Only make build modules if build != host.
# This should be done more generally, but at the moment it doesn't matter.
if test ${host_alias} != ${build_alias} ; then
- all_build_modules=all-build-libiberty
- configure_build_modules=configure-build-libiberty
+ for module in libiberty ; do
+ all_build_modules=all-build-${module}
+ configure_build_modules=configure-build-${module}
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ done
fi
all_host_modules=
check_host_modules="${check_host_modules} check-${module}"
install_host_modules="${install_host_modules} install-${module}"
configure_host_modules="${configure_host_modules} configure-${module}"
+ if test -z "${no_recursion}" \
+ && test -f ${module}/Makefile; then
+ echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+ rm -f ${module}/Makefile
+ fi
done
install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
check_target_modules="${check_target_modules} check-target-${module}"
install_target_modules="${install_target_modules} install-target-${module}"
configure_target_modules="${configure_target_modules} configure-target-${module}"
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
done
# Determine whether gdb needs tk/tcl or not.
# so we should be able to put the 'maybe's in unconditionally and
# leave out the maybe dependencies when enable_gdbtk is false. I'm not
# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
case "$enable_gdbtk" in
no)
GDB_TK="" ;;
+ yes)
+ GDB_TK="${gdb_tk}" ;;
*)
- GDB_TK="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui" ;;
+ # Only add the dependency on gdbtk when GDBtk is part of the gdb
+ # distro. Eventually someone will fix this and move Insight, nee
+ # gdbtk to a separate directory.
+ if test -d ${srcdir}/gdb/gdbtk ; then
+ GDB_TK="${gdb_tk}"
+ else
+ GDB_TK=""
+ fi
+ ;;
esac
# Create the 'maybe dependencies'. This uses a temporary file.
rm -f maybedep.tmp
+echo '# maybedep.tmp' > maybedep.tmp
for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
${install_host_modules} ${install_target_modules} \
${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
# Create the serialization dependencies. This uses a temporary file.
+# Check whether --enable-serial-configure or --disable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then
+ enableval="$enable_serial_configure"
+ :
+fi
+
+
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xno ||
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
- *) echo "\$(BUILD_SUBDIR)/${item}/Makefile: \$(BUILD_SUBDIR)/${olditem}/Makefile" >> serdep.tmp ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xno ||
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
- *) echo "${item}/Makefile: ${olditem}/Makefile" >> serdep.tmp ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xno ||
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
- *) echo "\$(TARGET_SUBDIR)/${item}/Makefile: \$(TARGET_SUBDIR)/${olditem}/Makefile" >> serdep.tmp ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
serialization_dependencies=serdep.tmp
-# Base args. Strip norecursion, cache-file, srcdir, host, build, target.
-# These are the ones we might not want to pass down to subconfigures.
-baseargs=`echo "${ac_configure_args}" | \
- sed -e 's/--no[^ ]*//' \
- -e 's/--cache[a-z-]*=[^ ]*//' \
- -e 's/--sr[a-z-]*=[^ ]*//' \
- -e 's/--ho[a-z-]*=[^ ]*//' \
- -e 's/--bu[a-z-]*=[^ ]*//' \
- -e 's/--ta[a-z-]*=[^ ]*//'`
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target and nonopt. These are the ones we might not want to pass
+# down to subconfigures.
+baseargs=`echo " ${ac_configure_args} " | \
+ sed -e 's/ --no[^ ]* / /' \
+ -e 's/ --c[a-z-]*[= ][^ ]* / /' \
+ -e 's/ --sr[a-z-]*[= ][^ ]* / /' \
+ -e 's/ --ho[a-z-]*[= ][^ ]* / /' \
+ -e 's/ --bu[a-z-]*[= ][^ ]* / /' \
+ -e 's/ --t[a-z-]*[= ][^ ]* / /' \
+ -e 's/ -cache-file[= ][^ ]* / /' \
+ -e 's/ -srcdir[= ][^ ]* / /' \
+ -e 's/ -host[= ][^ ]* / /' \
+ -e 's/ -build[= ][^ ]* / /' \
+ -e 's/ -target[= ][^ ]* / /' \
+ -e 's/ [^ -][^ ]* / /' \
+ -e 's/^ *//;s/ *$//'`
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
cache_file_option="--cache-file=../${cache_file}" ;;
esac
-host_configargs="${cache_file_option} ${buildopt} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
target_configargs=${baseargs}
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
- CC_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+ CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
fi
CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
else
- GCJ_FOR_TARGET=`echo gcj | sed -e 's/x/x/' ${program_transform_name}`
+ GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
fi
GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
CXX_FOR_TARGET='$(CXX)'
RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
else
- CXX_FOR_TARGET=`echo c++ | sed -e 's/x/x/' ${program_transform_name}`
+ CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
fi
CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2667: checking for $ac_word" >&5
+echo "configure:2741: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_AR" ; then
if test $build = $host ; then
- ncn_ct_AR=$AR
+ ncn_cv_AR=$AR
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2700: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_AR'+set}'`\" = set"; then
+echo "configure:2774: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_AR"; then
- ac_cv_prog_ncn_ct_AR="$ncn_ct_AR" # Let the user override the test.
+ if test -n "$ncn_cv_AR"; then
+ ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_AR="ar"
+ ac_cv_prog_ncn_cv_AR="ar"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
fi
fi
-ncn_ct_AR="$ac_cv_prog_ncn_ct_AR"
-if test -n "$ncn_ct_AR"; then
- echo "$ac_t""$ncn_ct_AR" 1>&6
+ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
+if test -n "$ncn_cv_AR"; then
+ echo "$ac_t""$ncn_cv_AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AR=$ncn_ct_AR
+ AR=$ncn_cv_AR
else
- AR=""
+ AR="${ncn_tool_prefix}ar"
fi
else
AR="$ac_cv_prog_AR"
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2738: checking for $ac_word" >&5
+echo "configure:2813: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_AS" ; then
if test $build = $host ; then
- ncn_ct_AS=$AS
+ ncn_cv_AS=$AS
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2771: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_AS'+set}'`\" = set"; then
+echo "configure:2846: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_AS"; then
- ac_cv_prog_ncn_ct_AS="$ncn_ct_AS" # Let the user override the test.
+ if test -n "$ncn_cv_AS"; then
+ ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_AS="as"
+ ac_cv_prog_ncn_cv_AS="as"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
fi
fi
-ncn_ct_AS="$ac_cv_prog_ncn_ct_AS"
-if test -n "$ncn_ct_AS"; then
- echo "$ac_t""$ncn_ct_AS" 1>&6
+ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
+if test -n "$ncn_cv_AS"; then
+ echo "$ac_t""$ncn_cv_AS" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AS=$ncn_ct_AS
+ AS=$ncn_cv_AS
else
- AS=""
+ AS="${ncn_tool_prefix}as"
fi
else
AS="$ac_cv_prog_AS"
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2809: checking for $ac_word" >&5
+echo "configure:2885: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_DLLTOOL" ; then
if test $build = $host ; then
- ncn_ct_DLLTOOL=$DLLTOOL
+ ncn_cv_DLLTOOL=$DLLTOOL
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2842: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_DLLTOOL'+set}'`\" = set"; then
+echo "configure:2918: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_DLLTOOL"; then
- ac_cv_prog_ncn_ct_DLLTOOL="$ncn_ct_DLLTOOL" # Let the user override the test.
+ if test -n "$ncn_cv_DLLTOOL"; then
+ ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_DLLTOOL="dlltool"
+ ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
fi
fi
-ncn_ct_DLLTOOL="$ac_cv_prog_ncn_ct_DLLTOOL"
-if test -n "$ncn_ct_DLLTOOL"; then
- echo "$ac_t""$ncn_ct_DLLTOOL" 1>&6
+ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
+if test -n "$ncn_cv_DLLTOOL"; then
+ echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- DLLTOOL=$ncn_ct_DLLTOOL
+ DLLTOOL=$ncn_cv_DLLTOOL
else
- DLLTOOL=""
+ DLLTOOL="${ncn_tool_prefix}dlltool"
fi
else
DLLTOOL="$ac_cv_prog_DLLTOOL"
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2880: checking for $ac_word" >&5
+echo "configure:2957: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_LD" ; then
if test $build = $host ; then
- ncn_ct_LD=$LD
+ ncn_cv_LD=$LD
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2913: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_LD'+set}'`\" = set"; then
+echo "configure:2990: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_LD"; then
- ac_cv_prog_ncn_ct_LD="$ncn_ct_LD" # Let the user override the test.
+ if test -n "$ncn_cv_LD"; then
+ ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_LD="ld"
+ ac_cv_prog_ncn_cv_LD="ld"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
fi
fi
-ncn_ct_LD="$ac_cv_prog_ncn_ct_LD"
-if test -n "$ncn_ct_LD"; then
- echo "$ac_t""$ncn_ct_LD" 1>&6
+ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
+if test -n "$ncn_cv_LD"; then
+ echo "$ac_t""$ncn_cv_LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD=$ncn_ct_LD
+ LD=$ncn_cv_LD
else
- LD=""
+ LD="${ncn_tool_prefix}ld"
fi
else
LD="$ac_cv_prog_LD"
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2951: checking for $ac_word" >&5
+echo "configure:3029: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_NM" ; then
if test $build = $host ; then
- ncn_ct_NM=$NM
+ ncn_cv_NM=$NM
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2984: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_NM'+set}'`\" = set"; then
+echo "configure:3062: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_NM"; then
- ac_cv_prog_ncn_ct_NM="$ncn_ct_NM" # Let the user override the test.
+ if test -n "$ncn_cv_NM"; then
+ ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_NM="nm"
+ ac_cv_prog_ncn_cv_NM="nm"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
fi
fi
-ncn_ct_NM="$ac_cv_prog_ncn_ct_NM"
-if test -n "$ncn_ct_NM"; then
- echo "$ac_t""$ncn_ct_NM" 1>&6
+ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
+if test -n "$ncn_cv_NM"; then
+ echo "$ac_t""$ncn_cv_NM" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM=$ncn_ct_NM
+ NM=$ncn_cv_NM
else
- NM=""
+ NM="${ncn_tool_prefix}nm"
fi
else
NM="$ac_cv_prog_NM"
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3022: checking for $ac_word" >&5
+echo "configure:3101: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_RANLIB" ; then
if test $build = $host ; then
- ncn_ct_RANLIB=$RANLIB
+ ncn_cv_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3055: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_RANLIB'+set}'`\" = set"; then
+echo "configure:3134: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_RANLIB"; then
- ac_cv_prog_ncn_ct_RANLIB="$ncn_ct_RANLIB" # Let the user override the test.
+ if test -n "$ncn_cv_RANLIB"; then
+ ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_RANLIB="ranlib"
+ ac_cv_prog_ncn_cv_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_ct_RANLIB" && ac_cv_prog_ncn_ct_RANLIB=":"
+ test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
fi
fi
-ncn_ct_RANLIB="$ac_cv_prog_ncn_ct_RANLIB"
-if test -n "$ncn_ct_RANLIB"; then
- echo "$ac_t""$ncn_ct_RANLIB" 1>&6
+ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
+if test -n "$ncn_cv_RANLIB"; then
+ echo "$ac_t""$ncn_cv_RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB=$ncn_ct_RANLIB
+ RANLIB=$ncn_cv_RANLIB
else
RANLIB=":"
fi
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3094: checking for $ac_word" >&5
+echo "configure:3173: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_WINDRES" ; then
if test $build = $host ; then
- ncn_ct_WINDRES=$WINDRES
+ ncn_cv_WINDRES=$WINDRES
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_WINDRES'+set}'`\" = set"; then
+echo "configure:3206: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_WINDRES"; then
- ac_cv_prog_ncn_ct_WINDRES="$ncn_ct_WINDRES" # Let the user override the test.
+ if test -n "$ncn_cv_WINDRES"; then
+ ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_WINDRES="windres"
+ ac_cv_prog_ncn_cv_WINDRES="windres"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
fi
fi
-ncn_ct_WINDRES="$ac_cv_prog_ncn_ct_WINDRES"
-if test -n "$ncn_ct_WINDRES"; then
- echo "$ac_t""$ncn_ct_WINDRES" 1>&6
+ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
+if test -n "$ncn_cv_WINDRES"; then
+ echo "$ac_t""$ncn_cv_WINDRES" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES=$ncn_ct_WINDRES
+ WINDRES=$ncn_cv_WINDRES
else
- WINDRES=""
+ WINDRES="${ncn_tool_prefix}windres"
fi
else
WINDRES="$ac_cv_prog_WINDRES"
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3165: checking for $ac_word" >&5
+echo "configure:3245: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_OBJCOPY" ; then
if test $build = $host ; then
- ncn_ct_OBJCOPY=$OBJCOPY
+ ncn_cv_OBJCOPY=$OBJCOPY
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3198: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_OBJCOPY'+set}'`\" = set"; then
+echo "configure:3278: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_OBJCOPY"; then
- ac_cv_prog_ncn_ct_OBJCOPY="$ncn_ct_OBJCOPY" # Let the user override the test.
+ if test -n "$ncn_cv_OBJCOPY"; then
+ ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_OBJCOPY="objcopy"
+ ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
fi
fi
-ncn_ct_OBJCOPY="$ac_cv_prog_ncn_ct_OBJCOPY"
-if test -n "$ncn_ct_OBJCOPY"; then
- echo "$ac_t""$ncn_ct_OBJCOPY" 1>&6
+ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
+if test -n "$ncn_cv_OBJCOPY"; then
+ echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJCOPY=$ncn_ct_OBJCOPY
+ OBJCOPY=$ncn_cv_OBJCOPY
else
- OBJCOPY=""
+ OBJCOPY="${ncn_tool_prefix}objcopy"
fi
else
OBJCOPY="$ac_cv_prog_OBJCOPY"
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3236: checking for $ac_word" >&5
+echo "configure:3317: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_OBJDUMP" ; then
if test $build = $host ; then
- ncn_ct_OBJDUMP=$OBJDUMP
+ ncn_cv_OBJDUMP=$OBJDUMP
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3269: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_OBJDUMP'+set}'`\" = set"; then
+echo "configure:3350: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_OBJDUMP"; then
- ac_cv_prog_ncn_ct_OBJDUMP="$ncn_ct_OBJDUMP" # Let the user override the test.
+ if test -n "$ncn_cv_OBJDUMP"; then
+ ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_OBJDUMP="objdump"
+ ac_cv_prog_ncn_cv_OBJDUMP="objdump"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
fi
fi
-ncn_ct_OBJDUMP="$ac_cv_prog_ncn_ct_OBJDUMP"
-if test -n "$ncn_ct_OBJDUMP"; then
- echo "$ac_t""$ncn_ct_OBJDUMP" 1>&6
+ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
+if test -n "$ncn_cv_OBJDUMP"; then
+ echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJDUMP=$ncn_ct_OBJDUMP
+ OBJDUMP=$ncn_cv_OBJDUMP
else
- OBJDUMP=""
+ OBJDUMP="${ncn_tool_prefix}objdump"
fi
else
OBJDUMP="$ac_cv_prog_OBJDUMP"
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3316: checking for $ac_word" >&5
+echo "configure:3398: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_AR_FOR_TARGET=$AR_FOR_TARGET
+ ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3349: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3431: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_AR_FOR_TARGET="$ncn_ct_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_AR_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_AR_FOR_TARGET="ar"
+ ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
fi
fi
-ncn_ct_AR_FOR_TARGET="$ac_cv_prog_ncn_ct_AR_FOR_TARGET"
-if test -n "$ncn_ct_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_AR_FOR_TARGET" 1>&6
+ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET"
+if test -n "$ncn_cv_AR_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AR_FOR_TARGET=$ncn_ct_AR_FOR_TARGET
+ AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET
else
- AR_FOR_TARGET=""
+ AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
fi
else
AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3387: checking for $ac_word" >&5
+echo "configure:3470: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_AS_FOR_TARGET=$AS_FOR_TARGET
+ ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3420: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3503: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_AS_FOR_TARGET="$ncn_ct_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_AS_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_AS_FOR_TARGET="as"
+ ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
fi
fi
-ncn_ct_AS_FOR_TARGET="$ac_cv_prog_ncn_ct_AS_FOR_TARGET"
-if test -n "$ncn_ct_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_AS_FOR_TARGET" 1>&6
+ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET"
+if test -n "$ncn_cv_AS_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AS_FOR_TARGET=$ncn_ct_AS_FOR_TARGET
+ AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET
else
- AS_FOR_TARGET=""
+ AS_FOR_TARGET="${ncn_target_tool_prefix}as"
fi
else
AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3458: checking for $ac_word" >&5
+echo "configure:3542: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3491: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3575: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_DLLTOOL_FOR_TARGET="$ncn_ct_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_DLLTOOL_FOR_TARGET="dlltool"
+ ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
fi
fi
-ncn_ct_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_ct_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_ct_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_DLLTOOL_FOR_TARGET" 1>&6
+ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET"
+if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- DLLTOOL_FOR_TARGET=$ncn_ct_DLLTOOL_FOR_TARGET
+ DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET
else
- DLLTOOL_FOR_TARGET=""
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
fi
else
DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3529: checking for $ac_word" >&5
+echo "configure:3614: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_LD_FOR_TARGET=$LD_FOR_TARGET
+ ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3562: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3647: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_LD_FOR_TARGET="$ncn_ct_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_LD_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_LD_FOR_TARGET="ld"
+ ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
fi
fi
-ncn_ct_LD_FOR_TARGET="$ac_cv_prog_ncn_ct_LD_FOR_TARGET"
-if test -n "$ncn_ct_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_LD_FOR_TARGET" 1>&6
+ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET"
+if test -n "$ncn_cv_LD_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD_FOR_TARGET=$ncn_ct_LD_FOR_TARGET
+ LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET
else
- LD_FOR_TARGET=""
+ LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
fi
else
LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3600: checking for $ac_word" >&5
+echo "configure:3686: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_NM_FOR_TARGET=$NM_FOR_TARGET
+ ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3633: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3719: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_NM_FOR_TARGET="$ncn_ct_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_NM_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_NM_FOR_TARGET="nm"
+ ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
fi
fi
-ncn_ct_NM_FOR_TARGET="$ac_cv_prog_ncn_ct_NM_FOR_TARGET"
-if test -n "$ncn_ct_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_NM_FOR_TARGET" 1>&6
+ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET"
+if test -n "$ncn_cv_NM_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM_FOR_TARGET=$ncn_ct_NM_FOR_TARGET
+ NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET
else
- NM_FOR_TARGET=""
+ NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
fi
else
NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3671: checking for $ac_word" >&5
+echo "configure:3758: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3704: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3791: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_RANLIB_FOR_TARGET="$ncn_ct_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_RANLIB_FOR_TARGET="ranlib"
+ ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_ct_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_ct_RANLIB_FOR_TARGET=":"
+ test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":"
fi
fi
-ncn_ct_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_ct_RANLIB_FOR_TARGET"
-if test -n "$ncn_ct_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_RANLIB_FOR_TARGET" 1>&6
+ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET"
+if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB_FOR_TARGET=$ncn_ct_RANLIB_FOR_TARGET
+ RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET
else
RANLIB_FOR_TARGET=":"
fi
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3743: checking for $ac_word" >&5
+echo "configure:3830: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_ct_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3776: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_ct_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3863: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_ct_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_ct_WINDRES_FOR_TARGET="$ncn_ct_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_ct_WINDRES_FOR_TARGET="windres"
+ ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
fi
fi
-ncn_ct_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_ct_WINDRES_FOR_TARGET"
-if test -n "$ncn_ct_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_ct_WINDRES_FOR_TARGET" 1>&6
+ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET"
+if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES_FOR_TARGET=$ncn_ct_WINDRES_FOR_TARGET
+ WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET
else
- WINDRES_FOR_TARGET=""
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
fi
else
WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
# Without the "./", some shells look in PATH for config.status.
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
/@maybe_dependencies@/r $maybe_dependencies
s%@maybe_dependencies@%%g
/@serialization_dependencies@/r $serialization_dependencies
s%@YACC@%$YACC%g
s%@config_shell@%$config_shell%g
s%@AR@%$AR%g
-s%@ncn_ct_AR@%$ncn_ct_AR%g
+s%@ncn_cv_AR@%$ncn_cv_AR%g
s%@AS@%$AS%g
-s%@ncn_ct_AS@%$ncn_ct_AS%g
+s%@ncn_cv_AS@%$ncn_cv_AS%g
s%@DLLTOOL@%$DLLTOOL%g
-s%@ncn_ct_DLLTOOL@%$ncn_ct_DLLTOOL%g
+s%@ncn_cv_DLLTOOL@%$ncn_cv_DLLTOOL%g
s%@LD@%$LD%g
-s%@ncn_ct_LD@%$ncn_ct_LD%g
+s%@ncn_cv_LD@%$ncn_cv_LD%g
s%@NM@%$NM%g
-s%@ncn_ct_NM@%$ncn_ct_NM%g
+s%@ncn_cv_NM@%$ncn_cv_NM%g
s%@RANLIB@%$RANLIB%g
-s%@ncn_ct_RANLIB@%$ncn_ct_RANLIB%g
+s%@ncn_cv_RANLIB@%$ncn_cv_RANLIB%g
s%@WINDRES@%$WINDRES%g
-s%@ncn_ct_WINDRES@%$ncn_ct_WINDRES%g
+s%@ncn_cv_WINDRES@%$ncn_cv_WINDRES%g
s%@OBJCOPY@%$OBJCOPY%g
-s%@ncn_ct_OBJCOPY@%$ncn_ct_OBJCOPY%g
+s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g
s%@OBJDUMP@%$OBJDUMP%g
-s%@ncn_ct_OBJDUMP@%$ncn_ct_OBJDUMP%g
+s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
s%@CC@%$CC%g
s%@CXX@%$CXX%g
s%@DEFAULT_YACC@%$DEFAULT_YACC%g
s%@DEFAULT_LEX@%$DEFAULT_LEX%g
s%@DEFAULT_M4@%$DEFAULT_M4%g
s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@ncn_ct_AR_FOR_TARGET@%$ncn_ct_AR_FOR_TARGET%g
+s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g
s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
-s%@ncn_ct_AS_FOR_TARGET@%$ncn_ct_AS_FOR_TARGET%g
+s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g
s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
-s%@ncn_ct_DLLTOOL_FOR_TARGET@%$ncn_ct_DLLTOOL_FOR_TARGET%g
+s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
-s%@ncn_ct_LD_FOR_TARGET@%$ncn_ct_LD_FOR_TARGET%g
+s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g
s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
-s%@ncn_ct_NM_FOR_TARGET@%$ncn_ct_NM_FOR_TARGET%g
+s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g
s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
-s%@ncn_ct_RANLIB_FOR_TARGET@%$ncn_ct_RANLIB_FOR_TARGET%g
+s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g
s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@ncn_ct_WINDRES_FOR_TARGET@%$ncn_ct_WINDRES_FOR_TARGET%g
+s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g
s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
OSDN Git Service
