--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]
+ --enable-gold use gold instead of ld
--enable-libada build libada directory
--enable-libssp build libssp directory
--enable-build-with-cxx build with C++ compiler instead of C compiler
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-# If --enable-gold is used, "gold" may replace "ld".
+# If --enable-gold is used, "gold" will replace "ld".
host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
esac
# Handle --enable-gold.
-# --enable-gold Build only gold
-# --disable-gold [default] Build only ld
-# --enable-gold=both Build both gold and ld, ld is default
-# --enable-gold=both/ld Same
-# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
# Check whether --enable-gold was given.
if test "${enable_gold+set}" = set; then :
ENABLE_GOLD=no
fi
- case "${ENABLE_GOLD}" in
- yes|both|both/gold|both/ld)
- # Check for ELF target.
- is_elf=no
- case "${target}" in
- *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
- | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
- case "${target}" in
- *-*-linux*aout* | *-*-linux*oldld*)
- ;;
- *)
- is_elf=yes
- ;;
- esac
- esac
-
- if test "$is_elf" = "yes"; then
- # Check for target supported by gold.
+if test "${ENABLE_GOLD}" = "yes"; then
+ # Check for ELF target.
+ is_elf=no
+ case "${target}" in
+ *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
+ | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- case "${ENABLE_GOLD}" in
- both*)
- configdirs="$configdirs gold"
- ;;
- *)
- configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
- ;;
- esac
- ENABLE_GOLD=yes
+ *-*-linux*aout* | *-*-linux*oldld*)
+ ;;
+ *)
+ is_elf=yes
;;
esac
- fi
- ;;
- no)
- ;;
- *)
- as_fn_error "invalid --enable-gold argument" "$LINENO" 5
- ;;
esac
+ if test "$is_elf" = "yes"; then
+ # Check for target supported by gold.
+ case "${target}" in
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
+ configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
+ ;;
+ esac
+ fi
+fi
+
# Configure extra directories which are host specific
case "${host}" in
# Check for PPL
+ppl_major_version=0
+ppl_minor_version=10
ppllibs=" -lppl_c -lppl -lgmpxx"
pplinc=
if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $pplinc $gmpinc"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.10 (or later revision) of PPL" >&5
-$as_echo_n "checking for version 0.10 (or later revision) of PPL... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version $ppl_major_version.$ppl_minor_version of PPL" >&5
+$as_echo_n "checking for version $ppl_major_version.$ppl_minor_version of PPL... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "ppl_c.h"
main ()
{
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
+ #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
choke me
#endif
-ac_ext=c
+
+
+target_elf=no
+case $target in
+ *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
+ *-msdosdjgpp* | *-netware* | *-vms* | *-wince* | *-*-pe* | \
+ alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
+ target_elf=no
+ ;;
+ *)
+ target_elf=yes
+ ;;
+esac
+
+if test $target_elf = yes; then :
+
+else
+ if test x"$default_enable_lto" = x"yes" ; then
+ enable_lto=no
+else
+ if test x"$enable_lto" = x"yes"; then
+ as_fn_error "LTO support requires an ELF target." "$LINENO" 5
+ fi
+fi
+default_enable_lto=no
+fi
+
+
+if test x"$enable_lto" = x"yes" ; then
+ # Make sure that libelf.h and gelf.h are available.
+
+# Check whether --with-libelf was given.
+if test "${with_libelf+set}" = set; then :
+ withval=$with_libelf;
+fi
+
+
+
+# Check whether --with-libelf_include was given.
+if test "${with_libelf_include+set}" = set; then :
+ withval=$with_libelf_include;
+fi
+
+
+
+# Check whether --with-libelf_lib was given.
+if test "${with_libelf_lib+set}" = set; then :
+ withval=$with_libelf_lib;
+fi
+
+
+ saved_CFLAGS="$CFLAGS"
+ saved_CPPFLAGS="$CPPFLAGS"
+ saved_LIBS="$LIBS"
+
+ case $with_libelf in
+ "")
+ libelflibs="-lelf"
+ libelfinc="-I/usr/include/libelf"
+ ;;
+ *)
+ libelflibs="-L$with_libelf/lib -lelf"
+ libelfinc="-I$with_libelf/include -I$with_libelf/include/libelf"
+ LIBS="$libelflibs $LIBS"
+ ;;
+ esac
+
+ if test "x$with_libelf_include" != x; then
+ libelfinc="-I$with_libelf_include"
+ fi
+
+ if test "x$with_libelf_lib" != x; then
+ libelflibs="-L$with_libelf_lib -lelf"
+ LIBS="$libelflibs $LIBS"
+ fi
+
+ if test "x$with_libelf$with_libelf_include$with_libelf_lib" = x \
+ && test -d ${srcdir}/libelf; then
+ libelflibs='-L$$r/$(HOST_SUBDIR)/libelf/lib -lelf '
+ libelfinc='-D__LIBELF_INTERNAL__ -I$$r/$(HOST_SUBDIR)/libelf/lib -I$$s/libelf/lib'
+ LIBS="$libelflibs $LIBS"
+
+ else
+
+ CFLAGS="$CFLAGS $libelfinc"
+ CPPFLAGS="$CPPFLAGS $libelfinc"
+ LIBS="$LIBS $libelflibs"
+
+ ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
done
-
-
-
-target_elf=no
-case $target in
- *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
- *-msdosdjgpp* | *-netware* | *-vms* | *-wince* | *-*-pe* | \
- alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
- target_elf=no
- ;;
- *)
- target_elf=yes
- ;;
-esac
-
-if test $target_elf = yes; then :
- if test x"$enable_lto" = x"yes" ; then
- # Make sure that libelf.h and gelf.h are available.
-
-# Check whether --with-libelf was given.
-if test "${with_libelf+set}" = set; then :
- withval=$with_libelf;
-fi
-
-
-
-# Check whether --with-libelf_include was given.
-if test "${with_libelf_include+set}" = set; then :
- withval=$with_libelf_include;
-fi
-
-
-
-# Check whether --with-libelf_lib was given.
-if test "${with_libelf_lib+set}" = set; then :
- withval=$with_libelf_lib;
-fi
-
-
- saved_CFLAGS="$CFLAGS"
- saved_CPPFLAGS="$CPPFLAGS"
- saved_LIBS="$LIBS"
-
- case $with_libelf in
- "")
- libelflibs="-lelf"
- libelfinc="-I/usr/include/libelf"
- ;;
- *)
- libelflibs="-L$with_libelf/lib -lelf"
- libelfinc="-I$with_libelf/include -I$with_libelf/include/libelf"
- LIBS="$libelflibs $LIBS"
- ;;
- esac
-
- if test "x$with_libelf_include" != x; then
- libelfinc="-I$with_libelf_include"
- fi
-
- if test "x$with_libelf_lib" != x; then
- libelflibs="-L$with_libelf_lib -lelf"
- LIBS="$libelflibs $LIBS"
- fi
-
- if test "x$with_libelf$with_libelf_include$with_libelf_lib" = x \
- && test -d ${srcdir}/libelf; then
- libelflibs='-L$$r/$(HOST_SUBDIR)/libelf/lib -lelf '
- libelfinc='-D__LIBELF_INTERNAL__ -I$$r/$(HOST_SUBDIR)/libelf/lib -I$$s/libelf/lib'
- LIBS="$libelflibs $LIBS"
-
- else
-
- CFLAGS="$CFLAGS $libelfinc"
- CPPFLAGS="$CPPFLAGS $libelfinc"
- LIBS="$LIBS $libelflibs"
-
- for ac_header in libelf.h
+for ac_header in libelf.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "libelf.h" "ac_cv_header_libelf_h" "$ac_includes_default"
if test "x$ac_cv_header_libelf_h" = x""yes; then :
fi
-else
- if test x"$default_enable_lto" = x"yes" ; then
- # On non-ELF platforms, LTO must be explicitly enabled.
- enable_lto=no
- else
- # Apart from ELF platforms, only Windows supports LTO so far. It
- # would also be nice to check the binutils support, but we don't
- # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
- # warn during gcc/ subconfigure; unless you're bootstrapping with
- # -flto it won't be needed until after installation anyway.
- case $target in
- *-cygwin*|*-mingw*) ;;
- *-apple-darwin*) ;;
- *) if test x"$enable_lto" = x"yes"; then
- as_fn_error "LTO support is not enabled for this target." "$LINENO" 5
- fi
- ;;
- esac
- fi
- default_enable_lto=no
-fi
-
# By default, C is the only stage 1 language.
skip_next=$separate_arg
continue
;;
- --enable-multilib | --disable-multilib)
- continue
- ;;
-*)
# An option. Add it.
case $ac_arg in
target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
fi
-# Pass --enable-multilib to target dirs; default to --enable-multilib.
-case $enable_multilib in
-'' | yes)
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
target_configargs="--enable-multilib ${target_configargs}"
- ;;
-esac
+fi
# Pass --with-newlib if appropriate. Note that target_configdirs has
# changed from the earlier setting of with_newlib.