ac_help="$ac_help
--enable-libssp Builds libssp directory"
ac_help="$ac_help
+ --enable-libgcc-math Builds libgcc-math directory"
+ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:603: checking host system type" >&5
+echo "configure:605: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:624: checking target system type" >&5
+echo "configure:626: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:642: checking build system type" >&5
+echo "configure:644: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:699: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:750: checking whether ln works" >&5
+echo "configure:752: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:774: checking whether ln -s works" >&5
+echo "configure:776: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
+ target-libgcc-math \
target-libgfortran \
${libgcj} \
target-libobjc \
noconfigdirs="$noconfigdirs target-libssp"
fi
+# Set the default so we build libgcc-math for ix86 and x86_64
+# Check whether --enable-libgcc-math or --disable-libgcc-math was given.
+if test "${enable_libgcc_math+set}" = set; then
+ enableval="$enable_libgcc_math"
+ :
+else
+
+case "${target}" in
+ i?86-* | x86_64-* )
+ enable_libgcc_math=yes ;;
+ *)
+ enable_libgcc_math=no ;;
+esac
+
+fi
+
+if test "${enable_libgcc_math}" != "yes"; then
+ noconfigdirs="$noconfigdirs target-libgcc-math"
+fi
+
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1859: checking for $ac_word" >&5
+echo "configure:1882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1889: checking for $ac_word" >&5
+echo "configure:1912: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1940: checking for $ac_word" >&5
+echo "configure:1963: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1972: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1995: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1983 "configure"
+#line 2006 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2014: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2037: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2019: checking whether we are using GNU C" >&5
+echo "configure:2042: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2047: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2070: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2114: checking for $ac_word" >&5
+echo "configure:2137: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2146: checking for $ac_word" >&5
+echo "configure:2169: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2179: checking whether compiler driver understands Ada" >&5
+echo "configure:2202: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2211: checking how to compare bootstrapped objects" >&5
+echo "configure:2234: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2309: checking for correct version of gmp.h" >&5
+echo "configure:2332: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2311 "configure"
+#line 2334 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2322: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2345: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2335: checking for MPFR" >&5
+echo "configure:2358: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2340 "configure"
+#line 2363 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3393: checking for $ac_word" >&5
+echo "configure:3416: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3433: checking for $ac_word" >&5
+echo "configure:3456: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3472: checking for $ac_word" >&5
+echo "configure:3495: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3511: checking for $ac_word" >&5
+echo "configure:3534: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3551: checking for $ac_word" >&5
+echo "configure:3574: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3590: checking for $ac_word" >&5
+echo "configure:3613: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3643: checking for $ac_word" >&5
+echo "configure:3666: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3684: checking for $ac_word" >&5
+echo "configure:3707: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3732: checking for $ac_word" >&5
+echo "configure:3755: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3763: checking for $ac_word" >&5
+echo "configure:3786: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3807: checking for $ac_word" >&5
+echo "configure:3830: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3838: checking for $ac_word" >&5
+echo "configure:3861: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3882: checking for $ac_word" >&5
+echo "configure:3905: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3913: checking for $ac_word" >&5
+echo "configure:3936: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3957: checking for $ac_word" >&5
+echo "configure:3980: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3988: checking for $ac_word" >&5
+echo "configure:4011: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4032: checking for $ac_word" >&5
+echo "configure:4055: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4063: checking for $ac_word" >&5
+echo "configure:4086: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4107: checking for $ac_word" >&5
+echo "configure:4130: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4138: checking for $ac_word" >&5
+echo "configure:4161: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4182: checking for $ac_word" >&5
+echo "configure:4205: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4213: checking for $ac_word" >&5
+echo "configure:4236: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4252: checking for $ac_word" >&5
+echo "configure:4275: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4283: checking for $ac_word" >&5
+echo "configure:4306: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4322: checking for $ac_word" >&5
+echo "configure:4345: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4353: checking for $ac_word" >&5
+echo "configure:4376: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4397: checking for $ac_word" >&5
+echo "configure:4420: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4428: checking for $ac_word" >&5
+echo "configure:4451: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4472: checking for $ac_word" >&5
+echo "configure:4495: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4503: checking for $ac_word" >&5
+echo "configure:4526: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in cc gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4567: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4590: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/CC_FOR_TARGET; then
ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/CC_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4584: checking for $ac_word" >&5
+echo "configure:4607: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4615: checking for $ac_word" >&5
+echo "configure:4638: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in c++ g++ cxx gxx; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4658: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4681: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/CXX_FOR_TARGET; then
ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/CXX_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4675: checking for $ac_word" >&5
+echo "configure:4698: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4706: checking for $ac_word" >&5
+echo "configure:4729: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4749: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4772: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/GCC_FOR_TARGET; then
ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/GCC_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4766: checking for $ac_word" >&5
+echo "configure:4789: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4797: checking for $ac_word" >&5
+echo "configure:4820: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcj; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4835: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4858: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/GCJ_FOR_TARGET; then
ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/GCJ_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4852: checking for $ac_word" >&5
+echo "configure:4875: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4883: checking for $ac_word" >&5
+echo "configure:4906: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gfortran; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4926: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4949: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/GFORTRAN_FOR_TARGET; then
ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/GFORTRAN_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4943: checking for $ac_word" >&5
+echo "configure:4966: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4974: checking for $ac_word" >&5
+echo "configure:4997: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5081: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5104: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/AR_FOR_TARGET
ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5095: checking for $ac_word" >&5
+echo "configure:5118: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ar; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5132: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5155: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/AR_FOR_TARGET; then
ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/AR_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5149: checking for $ac_word" >&5
+echo "configure:5172: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5180: checking for $ac_word" >&5
+echo "configure:5203: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5228: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5251: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/AS_FOR_TARGET
ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5242: checking for $ac_word" >&5
+echo "configure:5265: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in as; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5279: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5302: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/AS_FOR_TARGET; then
ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/AS_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5296: checking for $ac_word" >&5
+echo "configure:5319: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5327: checking for $ac_word" >&5
+echo "configure:5350: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5375: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5398: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/DLLTOOL_FOR_TARGET
ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
echo "$ac_t""$ac_cv_path_DLLTOOL_FOR_TARGET" 1>&6
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5389: checking for $ac_word" >&5
+echo "configure:5412: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in dlltool; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5426: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5449: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/DLLTOOL_FOR_TARGET; then
ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/DLLTOOL_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5443: checking for $ac_word" >&5
+echo "configure:5466: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5474: checking for $ac_word" >&5
+echo "configure:5497: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5522: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5545: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/LD_FOR_TARGET
ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5536: checking for $ac_word" >&5
+echo "configure:5559: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ld; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5573: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5596: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/LD_FOR_TARGET; then
ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/LD_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5590: checking for $ac_word" >&5
+echo "configure:5613: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5621: checking for $ac_word" >&5
+echo "configure:5644: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5669: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5692: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/LIPO_FOR_TARGET
ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
echo "$ac_t""$ac_cv_path_LIPO_FOR_TARGET" 1>&6
# Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5683: checking for $ac_word" >&5
+echo "configure:5706: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in lipo; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5720: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5743: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/LIPO_FOR_TARGET; then
ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/LIPO_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5737: checking for $ac_word" >&5
+echo "configure:5760: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5768: checking for $ac_word" >&5
+echo "configure:5791: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5816: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5839: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/NM_FOR_TARGET
ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5830: checking for $ac_word" >&5
+echo "configure:5853: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in nm; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5867: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5890: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/NM_FOR_TARGET; then
ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/NM_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5884: checking for $ac_word" >&5
+echo "configure:5907: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5915: checking for $ac_word" >&5
+echo "configure:5938: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5963: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5986: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/OBJDUMP_FOR_TARGET
ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
echo "$ac_t""$ac_cv_path_OBJDUMP_FOR_TARGET" 1>&6
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5977: checking for $ac_word" >&5
+echo "configure:6000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in objdump; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6014: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6037: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/OBJDUMP_FOR_TARGET; then
ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/OBJDUMP_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6031: checking for $ac_word" >&5
+echo "configure:6054: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6062: checking for $ac_word" >&5
+echo "configure:6085: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6110: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6133: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/RANLIB_FOR_TARGET
ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6124: checking for $ac_word" >&5
+echo "configure:6147: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ranlib; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6161: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6184: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/RANLIB_FOR_TARGET; then
ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/RANLIB_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6178: checking for $ac_word" >&5
+echo "configure:6201: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6209: checking for $ac_word" >&5
+echo "configure:6232: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6257: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6280: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/STRIP_FOR_TARGET
ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6271: checking for $ac_word" >&5
+echo "configure:6294: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in strip; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6308: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6331: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/STRIP_FOR_TARGET; then
ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/STRIP_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6325: checking for $ac_word" >&5
+echo "configure:6348: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6356: checking for $ac_word" >&5
+echo "configure:6379: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6404: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6427: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/WINDRES_FOR_TARGET
ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
echo "$ac_t""$ac_cv_path_WINDRES_FOR_TARGET" 1>&6
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6418: checking for $ac_word" >&5
+echo "configure:6441: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in windres; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6455: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6478: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/WINDRES_FOR_TARGET; then
ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/WINDRES_FOR_TARGET
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6472: checking for $ac_word" >&5
+echo "configure:6495: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6503: checking for $ac_word" >&5
+echo "configure:6526: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6549: checking where to find the target ar" >&5
+echo "configure:6572: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6582: checking where to find the target as" >&5
+echo "configure:6605: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6615: checking where to find the target cc" >&5
+echo "configure:6638: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6648: checking where to find the target c++" >&5
+echo "configure:6671: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6684: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6707: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6720: checking where to find the target dlltool" >&5
+echo "configure:6743: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6753: checking where to find the target gcc" >&5
+echo "configure:6776: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6786: checking where to find the target gcj" >&5
+echo "configure:6809: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6822: checking where to find the target gfortran" >&5
+echo "configure:6845: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6858: checking where to find the target ld" >&5
+echo "configure:6881: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:6891: checking where to find the target lipo" >&5
+echo "configure:6914: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:6914: checking where to find the target nm" >&5
+echo "configure:6937: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:6947: checking where to find the target objdump" >&5
+echo "configure:6970: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:6980: checking where to find the target ranlib" >&5
+echo "configure:7003: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7013: checking where to find the target strip" >&5
+echo "configure:7036: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7046: checking where to find the target windres" >&5
+echo "configure:7069: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7107: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7130: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
OSDN Git Service
