--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
- --enable-java-gc=TYPE choose garbage collector [boehm]"
+ --enable-parallel-mark parallelize marking and free list construction"
ac_help="$ac_help
--with-ecos enable runtime eCos target support"
+ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=no]"
+ac_help="$ac_help
+ --enable-full-debug include full support for pointer backtracing etc."
# Initialize some variables set by options.
# The variables have the same names as the options, with
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
+ac_aux_dir=
+for ac_dir in . $srcdir/.; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in . $srcdir/." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:567: checking for a BSD compatible install" >&5
+echo "configure:608: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:620: checking whether build environment is sane" >&5
+echo "configure:661: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:677: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:718: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:710: checking for Cygwin environment" >&5
+echo "configure:751: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 715 "configure"
+#line 756 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:726: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:743: checking for mingw32 environment" >&5
+echo "configure:784: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 748 "configure"
+#line 789 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:796: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
if test "${srcdir}" = "."; then
- if test "${with_target_subdir}" != "."; then
- boehm_gc_basedir="${srcdir}/${with_multisrctop}../."
+ if test "${with_target_subdir}" != "." -a -n "${with_target_subdir}"; then
+ gc_basedir="${srcdir}/${with_multisrctop}../."
else
- boehm_gc_basedir="${srcdir}/${with_multisrctop}."
+ gc_basedir="${srcdir}/${with_multisrctop}."
fi
else
- boehm_gc_basedir="${srcdir}/."
+ gc_basedir="${srcdir}/."
fi
ac_aux_dir=
-for ac_dir in $boehm_gc_basedir/.. $srcdir/$boehm_gc_basedir/..; do
+for ac_dir in $gc_basedir/.. $srcdir/$gc_basedir/..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $boehm_gc_basedir/.. $srcdir/$boehm_gc_basedir/.." 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in $gc_basedir/.. $srcdir/$gc_basedir/.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:866: checking host system type" >&5
+echo "configure:907: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:887: checking target system type" >&5
+echo "configure:928: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:905: checking build system type" >&5
+echo "configure:946: checking build system type" >&5
build_alias=$build
case "$build_alias" in
program_prefix=${target_alias}-
+# This works around an automake problem.
+mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
+
-PACKAGE=boehm-gc
-VERSION=5.1
+PACKAGE=gc
+
+VERSION=6.0
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:941: checking for working aclocal" >&5
+echo "configure:986: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:954: checking for working autoconf" >&5
+echo "configure:999: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:967: checking for working automake" >&5
+echo "configure:1012: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:980: checking for working autoheader" >&5
+echo "configure:1025: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:993: checking for working makeinfo" >&5
+echo "configure:1038: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1019: checking for $ac_word" >&5
+echo "configure:1064: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1049: checking for $ac_word" >&5
+echo "configure:1094: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1098: checking whether we are using GNU C" >&5
+echo "configure:1143: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1122: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1167: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1159: checking for $ac_word" >&5
+echo "configure:1204: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1192: checking whether we are using GNU C++" >&5
+echo "configure:1237: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1201: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1246: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1216: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1261: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# NEWLIB_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1249: checking build system type" >&5
+echo "configure:1294: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1270: checking for $ac_word" >&5
+echo "configure:1315: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1302: checking for $ac_word" >&5
+echo "configure:1347: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1334: checking for $ac_word" >&5
+echo "configure:1379: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1366: checking for $ac_word" >&5
+echo "configure:1411: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1411: checking for a BSD compatible install" >&5
+echo "configure:1456: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1465: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1510: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1503: checking for executable suffix" >&5
+echo "configure:1548: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
. ${srcdir}/configure.host
-case ${boehm_gc_basedir} in
-/* | A-Za-z:/\\*) boehm_gc_flagbasedir=${boehm_gc_basedir} ;;
-*) boehm_gc_flagbasedir='$(top_builddir)/'${boehm_gc_basedir} ;;
+case ${gc_basedir} in
+/* | A-Za-z:/\\*) gc_flagbasedir=${gc_basedir} ;;
+*) gc_flagbasedir='$(top_builddir)/'${gc_basedir} ;;
esac
-boehm_gc_cflags="${boehm_gc_cflags} -I"'$(top_builddir)'"/./targ-include -I${boehm_gc_flagbasedir}/libc/include"
+gc_cflags="${gc_cflags} -I"'$(top_builddir)'"/./targ-include -I${gc_flagbasedir}/libc/include"
case "${host}" in
*-*-cygwin32*)
- boehm_gc_cflags="${boehm_gc_cflags} -I${boehm_gc_flagbasedir}/../winsup/include"
+ gc_cflags="${gc_cflags} -I${gc_flagbasedir}/../winsup/include"
;;
esac
-boehm_gc_cflags="${boehm_gc_cflags} -fno-builtin"
-BOEHM_GC_CFLAGS=${boehm_gc_cflags}
+GC_CFLAGS=${gc_cflags}
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1636: checking for ld used by GCC" >&5
+echo "configure:1680: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1666: checking for GNU ld" >&5
+echo "configure:1710: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1669: checking for non-GNU ld" >&5
+echo "configure:1713: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1704: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1748: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1721: checking for $LD option to reload object files" >&5
+echo "configure:1765: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1733: checking for BSD-compatible nm" >&5
+echo "configure:1777: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1771: checking whether ln -s works" >&5
+echo "configure:1815: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1792: checking how to recognise dependant libraries" >&5
+echo "configure:1836: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
;;
irix5* | irix6*)
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1956: checking for object suffix" >&5
+echo "configure:2009: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1962: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1986: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2039: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2048: checking for file" >&5
+echo "configure:2101: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2119: checking for $ac_word" >&5
+echo "configure:2172: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2151: checking for $ac_word" >&5
+echo "configure:2204: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2186: checking for $ac_word" >&5
+echo "configure:2239: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2218: checking for $ac_word" >&5
+echo "configure:2271: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2285 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2338 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
rm -rf conftest*
;;
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2307: checking whether the C compiler needs -belf" >&5
+echo "configure:2376: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2320 "configure"
+#line 2389 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2357: checking how to run the C++ preprocessor" >&5
+echo "configure:2426: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2370 "configure"
+#line 2439 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2444: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2522: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2591: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2555: checking for executable suffix" >&5
+echo "configure:2624: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
fi
echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:2588: checking for thread model used by GCC" >&5
+echo "configure:2657: checking for thread model used by GCC" >&5
THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
+if test -z "$THREADS"; then
+ THREADS=no
+fi
echo "$ac_t""$THREADS" 1>&6
+# Check whether --enable-parallel-mark or --disable-parallel-mark was given.
+if test "${enable_parallel_mark+set}" = set; then
+ enableval="$enable_parallel_mark"
+ case "$THREADS" in
+ no | none | single)
+ { echo "configure: error: Parallel mark requires --enable-threads=x spec" 1>&2; exit 1; }
+ ;;
+ esac
+
+fi
+
+
INCLUDES=-I${srcdir}/include
THREADLIBS=
case "$THREADS" in
THREADS=posix
THREADLIBS=-lpthread
case "$host" in
+ x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
+ cat >> confdefs.h <<\EOF
+#define GC_LINUX_THREADS 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define _REENTRANT 1
+EOF
+
+ if test "${enable_parallel_mark}"; then
+ cat >> confdefs.h <<\EOF
+#define PARALLEL_MARK 1
+EOF
+
+ fi
+ cat >> confdefs.h <<\EOF
+#define THREAD_LOCAL_ALLOC 1
+EOF
+
+ ;;
*-*-linux*)
cat >> confdefs.h <<\EOF
-#define LINUX_THREADS 1
+#define GC_LINUX_THREADS 1
EOF
cat >> confdefs.h <<\EOF
EOF
;;
+ *-*-hpux*)
+ echo "configure: warning: "Only HP/UX 11 threads are supported."" 1>&2
+ cat >> confdefs.h <<\EOF
+#define GC_HPUX_THREADS 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define _POSIX_C_SOURCE 199506L
+EOF
+
+ if test "${enable_parallel_mark}" = yes; then
+ cat >> confdefs.h <<\EOF
+#define PARALLEL_MARK 1
+EOF
+
+ fi
+ cat >> confdefs.h <<\EOF
+#define THREAD_LOCAL_ALLOC 1
+EOF
+
+ THREADLIBS="-lpthread -lrt"
+ ;;
*-*-freebsd*)
echo "configure: warning: "FreeBSD does not yet fully support threads with Boehm GC."" 1>&2
cat >> confdefs.h <<\EOF
-#define FREEBSD_THREADS 1
+#define GC_FREEBSD_THREADS 1
EOF
INCLUDES="$INCLUDES -pthread"
;;
*-*-solaris*)
cat >> confdefs.h <<\EOF
-#define SOLARIS_THREADS 1
+#define GC_SOLARIS_THREADS 1
EOF
cat >> confdefs.h <<\EOF
-#define _SOLARIS_PTHREADS 1
+#define GC_SOLARIS_PTHREADS 1
EOF
;;
*-*-irix*)
cat >> confdefs.h <<\EOF
-#define IRIX_THREADS 1
+#define GC_IRIX_THREADS 1
EOF
;;
+ *-*-cygwin*)
+ THREADLIBS=
+ ;;
esac
;;
- decosf1 | irix | mach | os2 | solaris | win32 | dce | vxworks)
+ win32)
+ cat >> confdefs.h <<\EOF
+#define GC_WIN32_THREADS 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define NO_GETENV 1
+EOF
+
+ ;;
+ decosf1 | irix | mach | os2 | solaris | dce | vxworks)
{ echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
;;
*)
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2649: checking for dlopen in -ldl" >&5
+echo "configure:2788: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2657 "configure"
+#line 2796 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:2668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
-# Check whether --enable-java-gc or --disable-java-gc was given.
-if test "${enable_java_gc+set}" = set; then
- enableval="$enable_java_gc"
-
- GC=$enableval
-else
- GC=boehm
-fi
+target_all=libgcjgc.la
-target_all=
-if test "$GC" = "boehm"; then
- target_all=libgcjgc.la
-fi
TARGET_ECOS="no"
machdep=
case "$host" in
+ alpha*-*-openbsd*)
+ machdep="alpha_mach_dep.lo"
+ if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
+ echo "configure: warning: OpenBSD/Alpha without dlopen(). Shared library support is disabled" 1>&2
+ # Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=no
+fi
+
+ fi
+ ;;
alpha*-*-*)
machdep="alpha_mach_dep.lo"
;;
+ i?86-*-solaris2.[89]*)
+ cat >> confdefs.h <<\EOF
+#define SOLARIS25_PROC_VDB_BUG_FIXED 1
+EOF
+
+ ;;
mipstx39-*-elf*)
machdep="mips_ultrix_mach_dep.lo"
cat >> confdefs.h <<\EOF
mips-dec-ultrix*)
machdep="mips_ultrix_mach-dep.lo"
;;
+ mips*-*-linux*)
+ ;;
mips-*-*)
machdep="mips_sgi_mach_dep.lo"
cat >> confdefs.h <<\EOF
;;
sparc-sun-solaris2.3*)
+ machdep="sparc_mach_dep.lo"
cat >> confdefs.h <<\EOF
#define SUNOS53_SHARED_LIB 1
EOF
;;
+ sparc-sun-solaris2.*)
+ machdep="sparc_mach_dep.lo"
+ ;;
+ ia64-*-*)
+ machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
+ ;;
esac
if test x"$machdep" = x; then
machdep="mach_dep.lo"
EOF
cat >> confdefs.h <<\EOF
+#define NO_EXECUTE_PERMISSION 1
+EOF
+
+cat >> confdefs.h <<\EOF
+#define ALL_INTERIOR_POINTERS 1
+EOF
+
+
+cat >> confdefs.h <<\EOF
#define JAVA_FINALIZATION 1
EOF
#define GC_GCJ_SUPPORT 1
EOF
+cat >> confdefs.h <<\EOF
+#define ATOMIC_UNCOLLECTABLE 1
+EOF
+
if test -n "${with_cross_host}"; then
cat >> confdefs.h <<\EOF
EOF
cat >> confdefs.h <<\EOF
-#define NO_CLOCK 1
+#define NO_DEBUGGING 1
EOF
- cat >> confdefs.h <<\EOF
-#define SMALL_CONFIG 1
+fi
+
+# Check whether --enable-full-debug or --disable-full-debug was given.
+if test "${enable_full_debug+set}" = set; then
+ enableval="$enable_full_debug"
+ if test "$enable_full_debug" = "yes"; then
+ echo "configure: warning: "Must define GC_DEBUG and use debug alloc. in clients."" 1>&2
+ cat >> confdefs.h <<\EOF
+#define KEEP_BACK_PTRS 1
EOF
- cat >> confdefs.h <<\EOF
-#define NO_DEBUGGING 1
+ cat >> confdefs.h <<\EOF
+#define DBG_HDRS_ALL 1
+EOF
+
+ case $host in
+ ia64-*-linux* )
+ cat >> confdefs.h <<\EOF
+#define MAKE_BACK_GRAPH 1
+EOF
+
+ ;;
+ x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
+ cat >> confdefs.h <<\EOF
+#define MAKE_BACK_GRAPH 1
EOF
+ echo "configure: warning: "Client must not use -fomit-frame-pointer."" 1>&2
+ cat >> confdefs.h <<\EOF
+#define SAVE_CALL_COUNT 8
+EOF
+
+ ;;
+ esac
+ fi
fi
+
if test -z "$with_cross_host"; then
USE_LIBDIR_TRUE=
USE_LIBDIR_FALSE='#'
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile include/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
-s%@boehm_gc_basedir@%$boehm_gc_basedir%g
+s%@gc_basedir@%$gc_basedir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@mkinstalldirs@%$mkinstalldirs%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@EXEEXT@%$EXEEXT%g
-s%@BOEHM_GC_CFLAGS@%$BOEHM_GC_CFLAGS%g
+s%@GC_CFLAGS@%$GC_CFLAGS%g
s%@LN_S@%$LN_S%g
s%@OBJEXT@%$OBJEXT%g
s%@STRIP@%$STRIP%g
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile include/Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
with_multisubdir=${with_multisubdir}
ac_configure_args="${multilib_arg} ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-boehm_gc_basedir=${boehm_gc_basedir}
+gc_basedir=${gc_basedir}
CC="${CC}"
DEFS="$DEFS"
echo "$DEFS" > boehm-cflags
if test -n "$CONFIG_FILES"; then
- ac_file=Makefile . ${boehm_gc_basedir}/../config-ml.in
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
+ ac_file=Makefile . ${gc_basedir}/../config-ml.in
fi
exit 0
EOF