dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
+# Copyright (c) 1999-2001, 2002 by Red Hat, Inc. All rights reserved.
+#
+# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
+# OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
+#
+# Permission is hereby granted to use or copy this program
+# for any purpose, provided the above notices are retained on all copies.
+# Permission to modify the code and to distribute modified code is granted,
+# provided the above notices are retained, and a notice that the code was
+# modified is included with the above copyright notice.
+#
+# Original author: Tom Tromey
+
# FIXME: We temporarily define our own version of AC_PROG_CC. This is
# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
# are probably using a cross compiler, which will not be able to fully
# link an executable. This should really be fixed in autoconf
# itself.
-AC_DEFUN(BOEHM_CONFIGURE,
+AC_DEFUN(GC_CONFIGURE,
[
dnl Default to --enable-multilib
AC_ARG_ENABLE(multilib,
-[ --enable-multilib build many library versions (default)],
+[ --enable-multilib build many library versions (default)],
[case "${enableval}" in
yes) multilib=yes ;;
no) multilib=no ;;
dnl We may get other options which we don't document:
dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
+dnl I needed to add the -n test to allow configuration in src directory - HB
if test "[$]{srcdir}" = "."; then
- if test "[$]{with_target_subdir}" != "."; then
- boehm_gc_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
+ if test "[$]{with_target_subdir}" != "." -a -n "[$]{with_target_subdir}"; then
+ gc_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
else
- boehm_gc_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
+ gc_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
fi
else
- boehm_gc_basedir="[$]{srcdir}/$1"
+ gc_basedir="[$]{srcdir}/$1"
+fi
+AC_SUBST(gc_basedir)
+AC_CONFIG_AUX_DIR($gc_basedir/..)
+if :; then :; else
+ # This overrides the previous occurrence for automake, but not for
+ # autoconf, which is exactly what we want.
+ AC_CONFIG_AUX_DIR(..)
fi
-AC_SUBST(boehm_gc_basedir)
-AC_CANONICAL_HOST
+AC_CANONICAL_SYSTEM
-AM_INIT_AUTOMAKE(boehm-gc, 4.13a2, no-define)
+# This works around an automake problem.
+mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
+AC_SUBST(mkinstalldirs)
+
+AM_INIT_AUTOMAKE(gc, 6.0, no-define)
# FIXME: We temporarily define our own version of AC_PROG_CC. This is
# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
AC_DEFUN(LIB_AC_PROG_CC,
[AC_BEFORE([$0], [AC_PROG_CPP])dnl
+dnl Fool anybody using AC_PROG_CC.
+AC_PROVIDE([AC_PROG_CC])
AC_CHECK_PROG(CC, gcc, gcc)
if test -z "$CC"; then
AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
# Likewise for AC_PROG_CXX.
AC_DEFUN(LIB_AC_PROG_CXX,
[AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl
+dnl Fool anybody using AC_PROG_CXX.
+AC_PROVIDE([AC_PROG_CXX])
AC_CHECK_PROGS(CXX, $CCC c++ g++ gcc CC cxx cc++, gcc)
test -z "$CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH])
# automake happy, but we don't execute it, since we don't care about
# the result.
if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
AC_EXEEXT
fi
-. [$]{boehm_gc_basedir}/configure.host
+. [$]{srcdir}/configure.host
-case [$]{boehm_gc_basedir} in
-/* | [A-Za-z]:[/\\]*) boehm_gc_flagbasedir=[$]{boehm_gc_basedir} ;;
-*) boehm_gc_flagbasedir='[$](top_builddir)/'[$]{boehm_gc_basedir} ;;
+case [$]{gc_basedir} in
+/* | [A-Za-z]:[/\\]*) gc_flagbasedir=[$]{gc_basedir} ;;
+*) gc_flagbasedir='[$](top_builddir)/'[$]{gc_basedir} ;;
esac
-boehm_gc_cflags="[$]{boehm_gc_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{boehm_gc_flagbasedir}/libc/include"
+gc_cflags="[$]{gc_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{gc_flagbasedir}/libc/include"
case "${host}" in
*-*-cygwin32*)
- boehm_gc_cflags="[$]{boehm_gc_cflags} -I[$]{boehm_gc_flagbasedir}/../winsup/include"
+ gc_cflags="[$]{gc_cflags} -I[$]{gc_flagbasedir}/../winsup/include"
;;
esac
-boehm_gc_cflags="[$]{boehm_gc_cflags} -fno-builtin"
+dnl gc_cflags="[$]{gc_cflags} -fno-builtin"
-BOEHM_GC_CFLAGS=${boehm_gc_cflags}
-AC_SUBST(BOEHM_GC_CFLAGS)
+GC_CFLAGS=${gc_cflags}
+AC_SUBST(GC_CFLAGS)
]))
))))
+sinclude(../libtool.m4)
+dnl The line below arranges for aclocal not to bring a definition of
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[AC_DEFUN([AM_PROG_LIBTOOL],[AC_SUBST(LIBTOOL)])])
+
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
$1_FALSE=
fi])
-
-# serial 25 AM_PROG_LIBTOOL
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AM_ENABLE_SHARED])dnl
-AC_REQUIRE([AM_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AM_PROG_LD])dnl
-AC_REQUIRE([AM_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags=
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- CFLAGS="$CFLAGS -belf"
- ;;
-
-*-*-cygwin32*)
- AM_SYS_LIBTOOL_CYGWIN32
- ;;
-
-esac
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AM_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AM_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AM_ENABLE_SHARED,
-[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AM_DISABLE_SHARED,
-[AM_ENABLE_SHARED(no)])
-
-# AM_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AM_DISABLE_STATIC,
-[AM_ENABLE_STATIC(no)])
-
-# AM_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AM_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AM_ENABLE_STATIC,
-[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
-])
-
-
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- /* | [A-Za-z]:\\*)
-changequote([,])dnl
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AM_PROG_LD_GNU
-])
-
-AC_DEFUN(AM_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AM_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AM_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- else
- ac_cv_path_NM="$ac_dir/nm"
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
-])
-
-# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
OSDN Git Service
