OSDN Git Service

Blackfin: add elf_machine_load_address() stub
[uclinux-h8/uClibc.git] / Rules.mak
index 5be6bbe..d849590 100644 (file)
--- a/Rules.mak
+++ b/Rules.mak
@@ -1,12 +1,23 @@
 # Rules.make for uClibc
 #
-# Copyright (C) 2000-2006 Erik Andersen <andersen@uclibc.org>
+# Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
 #
 # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
 #
 
+# make nano-doc
+# FOO = bar  -- recursively expanded variable. Value is remebered verbatim.
+#               If it contains references to other variables, these references
+#               are expanded whenever this variable is _substituted_.
+# FOO := bar -- simply expanded variable. Right hand is expanded when
+#               the variable is _defined_. Therefore faster than =.
+# FOO ?= bar -- set a value only if it is not already set
+#               (behaves as =, not :=).
+# FOO += bar -- append; if FOO is not defined, acts like = (not :=).
+
+
 # check for proper make version
-ifneq ($(findstring 3.7,$(MAKE_VERSION)),)
+ifneq ($(findstring x3.7,x$(MAKE_VERSION)),)
 $(error Your make is too old $(MAKE_VERSION). Go get at least 3.80)
 endif
 
@@ -41,16 +52,24 @@ INSTALL    = install
 LN         = ln
 RM         = rm -f
 TAR        = tar
+SED        = sed
+AWK        = awk
 
 STRIP_FLAGS ?= -x -R .note -R .comment
 
+## unused? if yes, remove after 0.9.31
+## UNIFDEF := $(top_builddir)extra/scripts/unifdef
+
 # Select the compiler needed to build binaries for your development system
 HOSTCC     = gcc
-BUILD_CFLAGS = -O2 -Wall
-export ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun.*/sparc/ -e s/sparc.*/sparc/ \
-                                 -e s/arm.*/arm/ -e s/sa110/arm/ -e s/sh.*/sh/ \
+BUILD_CFLAGS = -Os -Wall
+export ARCH := $(shell uname -m | $(SED) -e s/i.86/i386/ \
+                                 -e s/sun.*/sparc/ -e s/sparc.*/sparc/ \
+                                 -e s/arm.*/arm/ -e s/sa110/arm/ \
+                                 -e s/sh.*/sh/ \
                                  -e s/s390x/s390/ -e s/parisc.*/hppa/ \
-                                 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
+                                 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+                                 -e s/xtensa.*/xtensa/ )
 
 
 #---------------------------------------------------------
@@ -58,15 +77,16 @@ export ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun.*/sparc/ -e s/spa
 # mortals.  Unless you hang out with the gods, you should
 # probably leave all this stuff alone.
 
+
 # Pull in the user's uClibc configuration
 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 -include $(top_builddir).config
 endif
 
 # Make certain these contain a final "/", but no "//"s.
-TARGET_ARCH:=$(shell grep -s '^TARGET_ARCH' $(top_builddir)/.config | sed -e 's/^TARGET_ARCH=//' -e 's/"//g')
+TARGET_ARCH:=$(shell grep -s '^TARGET_ARCH' $(top_builddir)/.config | $(SED) -e 's/^TARGET_ARCH=//' -e 's/"//g')
 TARGET_ARCH:=$(strip $(subst ",, $(strip $(TARGET_ARCH))))
-TARGET_SUBARCH:=$(shell grep -s '^TARGET_SUBARCH' $(top_builddir)/.config | sed -e 's/^TARGET_SUBARCH=//' -e 's/"//g')
+TARGET_SUBARCH:=$(shell grep -s '^TARGET_SUBARCH' $(top_builddir)/.config | $(SED) -e 's/^TARGET_SUBARCH=//' -e 's/"//g')
 TARGET_SUBARCH:=$(strip $(subst ",, $(strip $(TARGET_SUBARCH))))
 RUNTIME_PREFIX:=$(strip $(subst //,/, $(subst ,/, $(subst ",, $(strip $(RUNTIME_PREFIX))))))
 DEVEL_PREFIX:=$(strip $(subst //,/, $(subst ,/, $(subst ",, $(strip $(DEVEL_PREFIX))))))
@@ -77,8 +97,8 @@ export RUNTIME_PREFIX DEVEL_PREFIX KERNEL_HEADERS
 # Now config hard core
 MAJOR_VERSION := 0
 MINOR_VERSION := 9
-SUBLEVEL      := 29
-EXTRAVERSION  :=
+SUBLEVEL      := 30
+EXTRAVERSION  :=-svn
 VERSION       := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL)
 ifneq ($(EXTRAVERSION),)
 VERSION       := $(VERSION)$(EXTRAVERSION)
@@ -89,14 +109,17 @@ export MAJOR_VERSION MINOR_VERSION SUBLEVEL VERSION LC_ALL
 
 LIBC := libc
 SHARED_MAJORNAME := $(LIBC).so.$(MAJOR_VERSION)
-ifneq ($(findstring  $(TARGET_ARCH) , hppa64 ia64 mips64 powerpc64 s390x sh64 sparc64 x86_64 ),)
+ifneq ($(findstring  $(TARGET_ARCH) , hppa64 ia64 mips64 powerpc64 s390x sparc64 x86_64 ),)
 UCLIBC_LDSO_NAME := ld64-uClibc
+ARCH_NATIVE_BIT := 64
 else
 UCLIBC_LDSO_NAME := ld-uClibc
+ARCH_NATIVE_BIT := 32
 endif
 UCLIBC_LDSO := $(UCLIBC_LDSO_NAME).so.$(MAJOR_VERSION)
 NONSHARED_LIBNAME := uclibc_nonshared.a
 libc := $(top_builddir)lib/$(SHARED_MAJORNAME)
+libc.depend := $(top_builddir)lib/$(SHARED_MAJORNAME:.$(MAJOR_VERSION)=)
 interp := $(top_builddir)lib/interp.os
 ldso := $(top_builddir)lib/$(UCLIBC_LDSO)
 headers_dep := $(top_builddir)include/bits/sysnum.h
@@ -121,7 +144,7 @@ comma:=,
 space:= #
 
 ifndef CROSS
-CROSS=$(subst ",, $(strip $(CROSS_COMPILER_PREFIX)))
+CROSS=$(strip $(subst ",, $(CROSS_COMPILER_PREFIX)))
 endif
 
 # A nifty macro to make testing gcc features easier
@@ -137,6 +160,9 @@ check_ld=$(shell \
 
 ARFLAGS:=cr
 
+
+# Flags in OPTIMIZATION are used only for non-debug builds
+
 OPTIMIZATION:=
 # Use '-Os' optimization if available, else use -O2, allow Config to override
 OPTIMIZATION+=$(call check_gcc,-Os,-O2)
@@ -156,9 +182,43 @@ OPTIMIZATION+=$(call check_gcc,-fno-tree-dominator-opts,)
 OPTIMIZATION+=$(call check_gcc,-fno-strength-reduce,)
 endif
 
+
+# CPU_CFLAGS-y contain options which are not warnings,
+# not include or library paths, and not optimizations.
+
+# Why -funsigned-char: I hunted a bug related to incorrect
+# sign extension of 'char' type for 10 hours straight. Not fun.
+CPU_CFLAGS-y := -funsigned-char -fno-builtin
+
+CPU_CFLAGS-y += $(call check_gcc,-fno-asm,)
+
+LDADD_LIBFLOAT=
+ifeq ($(UCLIBC_HAS_SOFT_FLOAT),y)
+# If -msoft-float isn't supported, we want an error anyway.
+# Hmm... might need to revisit this for arm since it has 2 different
+# soft float encodings.
+ifneq ($(TARGET_ARCH),nios)
+ifneq ($(TARGET_ARCH),nios2)
+ifneq ($(TARGET_ARCH),sh)
+CPU_CFLAGS-y += -msoft-float
+endif
+endif
+endif
+ifeq ($(TARGET_ARCH),arm)
+# No longer needed with current toolchains, but leave it here for now.
+# If anyone is actually still using gcc 2.95 (say), they can uncomment it.
+#    LDADD_LIBFLOAT=-lfloat
+endif
+endif
+
+CPU_CFLAGS-y += $(call check_gcc,-std=gnu99,)
+
 CPU_CFLAGS-$(UCLIBC_FORMAT_SHARED_FLAT) += -mid-shared-library
 CPU_CFLAGS-$(UCLIBC_FORMAT_FLAT_SEP_DATA) += -msep-data
 
+CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN) += -Wl,-EL
+CPU_LDFLAGS-$(ARCH_BIG_ENDIAN)    += -Wl,-EB
+
 PICFLAG-y := -fPIC
 PICFLAG-$(UCLIBC_FORMAT_FDPIC_ELF) := -mfdpic
 PICFLAG := $(PICFLAG-y)
@@ -166,8 +226,65 @@ PIEFLAG_NAME:=-fPIE
 
 # Some nice CPU specific optimizations
 ifeq ($(TARGET_ARCH),i386)
-       OPTIMIZATION+=$(call check_gcc,-mpreferred-stack-boundary=2,)
-       OPTIMIZATION+=$(call check_gcc,-falign-jumps=0 -falign-loops=0,-malign-jumps=0 -malign-loops=0)
+       OPTIMIZATION+=$(call check_gcc,-fomit-frame-pointer,)
+
+ifeq ($(CONFIG_386)$(CONFIG_486)$(CONFIG_586)$(CONFIG_586MMX),y)
+       # Non-SSE capable processor.
+       # NB: this may make SSE insns segfault!
+       # -O1 -march=pentium3, -Os -msse etc are known to be affected.
+       # See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13685
+       # -m32 is needed if host is 64-bit
+       OPTIMIZATION+=$(call check_gcc,-m32 -mpreferred-stack-boundary=2,)
+else
+       OPTIMIZATION+=$(call check_gcc,-mpreferred-stack-boundary=4,)
+endif
+
+       # Choice of alignment (please document why!)
+       #  -falign-labels: in-line labels
+       #  (reachable by normal code flow, aligning will insert nops
+       #  which will be executed - may even make things slower)
+       #  -falign-jumps: reachable only by a jump
+       # Generic: no alignment at all (smallest code)
+       GCC_FALIGN=$(call check_gcc,-falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1,-malign-jumps=1 -malign-loops=1)
+ifeq ($(CONFIG_K7),y)
+       # Align functions to four bytes, use default for jumps and loops (why?)
+       GCC_FALIGN=$(call check_gcc,-falign-functions=4 -falign-labels=1,-malign-functions=4)
+endif
+ifeq ($(CONFIG_CRUSOE),y)
+       # Use compiler's default for functions, jumps and loops (why?)
+       GCC_FALIGN=$(call check_gcc,-falign-functions=0 -falign-labels=1,-malign-functions=0)
+endif
+ifeq ($(CONFIG_CYRIXIII),y)
+       # Use compiler's default for functions, jumps and loops (why?)
+       GCC_FALIGN=$(call check_gcc,-falign-functions=0 -falign-labels=1,-malign-functions=0)
+endif
+       OPTIMIZATION+=$(GCC_FALIGN)
+
+       # Putting each function and data object into its own section
+       # allows for kbytes of less text if users link against static uclibc
+       # using ld --gc-sections.
+       # ld 2.18 can't do that (yet?) for shared libraries, so we itself
+       # do not use --gc-sections at shared lib link time.
+       # However, in combination with sections being sorted by alignment
+       # it does result in much reduced padding:
+       #   text    data     bss     dec     hex
+       # 235319    1472    5992  242783   3b45f old.so
+       # 234104    1472    5980  241556   3af94 new.so
+       # Without -ffunction-sections, all functions will get aligned
+       # to 4 byte boundary by as/ld. This is arguably a bug in as.
+       # It specifies 4 byte align for .text even if not told to do so:
+       # Idx Name          Size      VMA       LMA       File off  Algn
+       #   0 .text         xxxxxxxx  00000000  00000000  xxxxxxxx  2**2 <===!
+       CPU_CFLAGS-y  += $(call check_gcc,-ffunction-sections -fdata-sections,)
+ifneq ($(call check_ld,--sort-common,),)
+       CPU_LDFLAGS-y += -Wl,--sort-common
+endif
+ifneq ($(call check_ld,--sort-section alignment),)
+       CPU_LDFLAGS-y += -Wl,--sort-section,alignment
+endif
+
+       CPU_LDFLAGS-y+=-m32
+       CPU_CFLAGS-y+=-m32
        CPU_CFLAGS-$(CONFIG_386)+=-march=i386
        CPU_CFLAGS-$(CONFIG_486)+=-march=i486
        CPU_CFLAGS-$(CONFIG_ELAN)+=-march=i486
@@ -178,11 +295,11 @@ ifeq ($(TARGET_ARCH),i386)
        CPU_CFLAGS-$(CONFIG_PENTIUMIII)+=$(call check_gcc,-march=pentium3,-march=i686)
        CPU_CFLAGS-$(CONFIG_PENTIUM4)+=$(call check_gcc,-march=pentium4,-march=i686)
        CPU_CFLAGS-$(CONFIG_K6)+=$(call check_gcc,-march=k6,-march=i586)
-       CPU_CFLAGS-$(CONFIG_K7)+=$(call check_gcc,-march=athlon,-march=i686) $(call check_gcc,-falign-functions=4,-malign-functions=4)
-       CPU_CFLAGS-$(CONFIG_CRUSOE)+=-march=i686 $(call check_gcc,-falign-functions=0,-malign-functions=0)
+       CPU_CFLAGS-$(CONFIG_K7)+=$(call check_gcc,-march=athlon,-march=i686)
+       CPU_CFLAGS-$(CONFIG_CRUSOE)+=-march=i686
        CPU_CFLAGS-$(CONFIG_WINCHIPC6)+=$(call check_gcc,-march=winchip-c6,-march=i586)
        CPU_CFLAGS-$(CONFIG_WINCHIP2)+=$(call check_gcc,-march=winchip2,-march=i586)
-       CPU_CFLAGS-$(CONFIG_CYRIXIII)+=$(call check_gcc,-march=c3,-march=i486) $(call check_gcc,-falign-functions=0,-malign-functions=0)
+       CPU_CFLAGS-$(CONFIG_CYRIXIII)+=$(call check_gcc,-march=c3,-march=i486)
        CPU_CFLAGS-$(CONFIG_NEHEMIAH)+=$(call check_gcc,-march=c3-2,-march=i686)
 endif
 
@@ -195,8 +312,6 @@ endif
 
 ifeq ($(TARGET_ARCH),arm)
        OPTIMIZATION+=-fstrict-aliasing
-       CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN)+=-Wl,-EL
-       CPU_LDFLAGS-$(ARCH_BIG_ENDIAN)+=-Wl,-EB
        CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
        CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
        CPU_CFLAGS-$(CONFIG_GENERIC_ARM)+=
@@ -216,16 +331,17 @@ ifeq ($(TARGET_ARCH),arm)
        CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=$(call check_gcc,-mtune=xscale,-mtune=strongarm110)
        CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=-march=armv5te -Wa,-mcpu=xscale
        CPU_CFLAGS-$(CONFIG_ARM_IWMMXT)+=-march=iwmmxt -Wa,-mcpu=iwmmxt -mabi=iwmmxt
+       CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M3)+=-mcpu=cortex-m3 -mthumb
+       CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M1)+=-mcpu=cortex-m1 -mthumb
 endif
 
 ifeq ($(TARGET_ARCH),mips)
-       CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN)+=-Wl,-EL
-       CPU_LDFLAGS-$(ARCH_BIG_ENDIAN)+=-Wl,-EB
        CPU_CFLAGS-$(CONFIG_MIPS_ISA_1)+=-mips1
        CPU_CFLAGS-$(CONFIG_MIPS_ISA_2)+=-mips2 -mtune=mips2
        CPU_CFLAGS-$(CONFIG_MIPS_ISA_3)+=-mips3 -mtune=mips3
        CPU_CFLAGS-$(CONFIG_MIPS_ISA_4)+=-mips4 -mtune=mips4
        CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32)+=-mips32 -mtune=mips32
+       CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32R2)+=-march=mips32r2 -mtune=mips32r2
        CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS64)+=-mips64 -mtune=mips32
        ifeq ($(strip $(ARCH_BIG_ENDIAN)),y)
                CPU_LDFLAGS-$(CONFIG_MIPS_N64_ABI)+=-Wl,-melf64btsmip
@@ -248,13 +364,11 @@ endif
 ifeq ($(TARGET_ARCH),sh)
        OPTIMIZATION+=-fstrict-aliasing
        OPTIMIZATION+= $(call check_gcc,-mprefergot,)
-       CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN)+=-Wl,-EL
-       CPU_LDFLAGS-$(ARCH_BIG_ENDIAN)+=-Wl,-EB
        CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-ml
        CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mb
        CPU_CFLAGS-$(CONFIG_SH2)+=-m2
        CPU_CFLAGS-$(CONFIG_SH3)+=-m3
-ifeq ($(UCLIBC_HAS_FLOATS),y)
+ifeq ($(UCLIBC_HAS_FPU),y)
        CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a
        CPU_CFLAGS-$(CONFIG_SH4)+=-m4
 else
@@ -265,14 +379,13 @@ endif
 
 ifeq ($(TARGET_ARCH),sh64)
        OPTIMIZATION+=-fstrict-aliasing
-       CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN):=-Wl,-EL
-       CPU_LDFLAGS-$(ARCH_BIG_ENDIAN):=-Wl,-EB
        CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN):=-ml
        CPU_CFLAGS-$(ARCH_BIG_ENDIAN):=-mb
        CPU_CFLAGS-$(CONFIG_SH5)+=-m5-32media
 endif
 
 ifeq ($(TARGET_ARCH),h8300)
+       SYMBOL_PREFIX=_
        CPU_LDFLAGS-$(CONFIG_H8300H)+= -Wl,-ms8300h
        CPU_LDFLAGS-$(CONFIG_H8S)   += -Wl,-ms8300s
        CPU_CFLAGS-$(CONFIG_H8300H) += -mh -mint32
@@ -302,10 +415,23 @@ ifeq ($(TARGET_ARCH),powerpc)
        PIEFLAG_NAME:=-fpie
        PPC_HAS_REL16:=$(shell echo -e "\t.text\n\taddis 11,30,_GLOBAL_OFFSET_TABLE_-.@ha" | $(CC) -c -x assembler -o /dev/null -  2> /dev/null && echo -n y || echo -n n)
        CPU_CFLAGS-$(PPC_HAS_REL16)+= -DHAVE_ASM_PPC_REL16
-       CPU_CFLAGS-$(CONFIG_E500) += "-D__NO_MATH_INLINES -D__NO_LONG_DOUBLE_MATH"
+       CPU_CFLAGS-$(CONFIG_E500) += "-D__NO_MATH_INLINES"
 
 endif
 
+ifeq ($(TARGET_ARCH),bfin)
+       SYMBOL_PREFIX=_
+ifeq ($(UCLIBC_FORMAT_FDPIC_ELF),y)
+       CPU_CFLAGS-y:=-mfdpic
+       CPU_LDFLAGS-y += -Wl,-melf32bfinfd
+       PICFLAG:=-fpic
+       PIEFLAG_NAME:=-fpie
+endif
+ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
+       PICFLAG := -mleaf-id-shared-library
+endif
+endif
+
 ifeq ($(TARGET_ARCH),frv)
        CPU_LDFLAGS-$(CONFIG_FRV)+=-Wl,-melf32frvfd
        # Using -pie causes the program to have an interpreter, which is
@@ -313,28 +439,63 @@ ifeq ($(TARGET_ARCH),frv)
        # -shared by itself would get us global function descriptors
        # and calls through PLTs, dynamic resolution of symbols, etc,
        # which would break as well, but -Bsymbolic comes to the rescue.
-       export LDPIEFLAG:=-Wl,-shared -Wl,-Bsymbolic
+       export LDPIEFLAG:=-shared -Wl,-Bsymbolic
        UCLIBC_LDSO=ld.so.1
 endif
 
+ifeq ($(strip $(TARGET_ARCH)),avr32)
+       CPU_CFLAGS-$(CONFIG_AVR32_AP7)  += -march=ap
+       CPU_CFLAGS-$(CONFIG_LINKRELAX)  += -mrelax
+       CPU_LDFLAGS-$(CONFIG_LINKRELAX) += --relax
+endif
+
+ifeq ($(TARGET_ARCH),i960)
+      SYMBOL_PREFIX=_
+endif
+
+ifeq ($(TARGET_ARCH),microblaze)
+      SYMBOL_PREFIX=_
+endif
+
+ifeq ($(TARGET_ARCH),v850)
+      SYMBOL_PREFIX=_
+endif
+
 # Keep the check_gcc from being needlessly executed
 ifndef PIEFLAG
-ifneq ($(UCLIBC_BUILD_PIE),y)
-export PIEFLAG:=
-else
 export PIEFLAG:=$(call check_gcc,$(PIEFLAG_NAME),$(PICFLAG))
 endif
-endif
 # We need to keep track of both the CC PIE flag (above) as
 # well as the LD PIE flag (below) because we can't rely on
-# gcc passing -pie if we used -fPIE
+# gcc passing -pie if we used -fPIE. We need to directly use -pie
+# instead of -Wl,-pie as gcc picks up the wrong startfile/endfile
 ifndef LDPIEFLAG
-ifneq ($(UCLIBC_BUILD_PIE),y)
-export LDPIEFLAG:=
-else
-export LDPIEFLAG:=$(shell $(LD) --help 2>/dev/null | grep -q -- -pie && echo "-Wl,-pie")
+export LDPIEFLAG:=$(shell $(LD) --help 2>/dev/null | grep -q -- -pie && echo "-pie")
+endif
+
+# Check for --as-needed support in linker
+ifndef LD_FLAG_ASNEEDED
+_LD_FLAG_ASNEEDED:=$(shell $(LD) --help 2>/dev/null | grep -- --as-needed)
+ifneq ($(_LD_FLAG_ASNEEDED),)
+export LD_FLAG_ASNEEDED:=--as-needed
 endif
 endif
+ifndef LD_FLAG_NO_ASNEEDED
+ifdef LD_FLAG_ASNEEDED
+export LD_FLAG_NO_ASNEEDED:=--no-as-needed
+endif
+endif
+ifndef CC_FLAG_ASNEEDED
+ifdef LD_FLAG_ASNEEDED
+export CC_FLAG_ASNEEDED:=-Wl,$(LD_FLAG_ASNEEDED)
+endif
+endif
+ifndef CC_FLAG_NO_ASNEEDED
+ifdef LD_FLAG_NO_ASNEEDED
+export CC_FLAG_NO_ASNEEDED:=-Wl,$(LD_FLAG_NO_ASNEEDED)
+endif
+endif
+link.asneeded = $(if $(and $(CC_FLAG_ASNEEDED),$(CC_FLAG_NO_ASNEEDED)),$(CC_FLAG_ASNEEDED) $(1) $(CC_FLAG_NO_ASNEEDED))
 
 # Check for AS_NEEDED support in linker script (binutils>=2.16.1 has it)
 ifndef ASNEEDED
@@ -347,9 +508,11 @@ ifeq ($(EXTRA_WARNINGS),y)
 XWARNINGS+=-Wnested-externs -Wshadow -Wmissing-noreturn -Wmissing-format-attribute -Wformat=2
 XWARNINGS+=-Wmissing-prototypes -Wmissing-declarations
 XWARNINGS+=-Wnonnull -Wundef
-# works only w/ gcc-3.4 and up, can't be checked for gcc-3.x w/ check_gcc()
+# Works only w/ gcc-3.4 and up, can't be checked for gcc-3.x w/ check_gcc()
 #XWARNINGS+=-Wdeclaration-after-statement
 endif
+# Seems to be unused (no ARCH_CFLAGS anywhere), delete?
+# if yes, remove after 0.9.31
 XARCH_CFLAGS=$(subst ",, $(strip $(ARCH_CFLAGS)))
 CPU_CFLAGS=$(subst ",, $(strip $(CPU_CFLAGS-y)))
 
@@ -362,40 +525,23 @@ else
 SSP_CFLAGS := $(SSP_DISABLE_FLAGS)
 endif
 
-# Some nice CFLAGS to work with
+NOSTDLIB_CFLAGS:=$(call check_gcc,-nostdlib,)
+
+# Collect all CFLAGS components
 CFLAGS := -include $(top_builddir)include/libc-symbols.h \
        $(XWARNINGS) $(CPU_CFLAGS) $(SSP_CFLAGS) \
-       -fno-builtin -nostdinc -I$(top_builddir)include -I.
-
+       -nostdinc -I$(top_builddir)include -I. \
+       -I$(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)
 ifneq ($(strip $(UCLIBC_EXTRA_CFLAGS)),"")
 CFLAGS += $(subst ",, $(UCLIBC_EXTRA_CFLAGS))
 endif
 
-LDADD_LIBFLOAT=
-ifeq ($(UCLIBC_HAS_SOFT_FLOAT),y)
-# If -msoft-float isn't supported, we want an error anyway.
-# Hmm... might need to revisit this for arm since it has 2 different
-# soft float encodings.
-ifneq ($(TARGET_ARCH),nios)
-ifneq ($(TARGET_ARCH),nios2)
-CFLAGS += -msoft-float
-endif
-endif
-ifeq ($(TARGET_ARCH),arm)
-# No longer needed with current toolchains, but leave it here for now.
-# If anyone is actually still using gcc 2.95 (say), they can uncomment it.
-#    LDADD_LIBFLOAT=-lfloat
-endif
-endif
-
 # We need this to be checked within libc-symbols.h
 ifneq ($(HAVE_SHARED),y)
 CFLAGS += -DSTATIC
 endif
 
-CFLAGS += $(call check_gcc,-std=gnu99,)
-
-LDFLAGS_NOSTRIP:=$(CPU_LDFLAGS-y) -Wl,-shared \
+LDFLAGS_NOSTRIP:=$(CPU_LDFLAGS-y) -shared \
        -Wl,--warn-common -Wl,--warn-once -Wl,-z,combreloc
 # binutils-2.16.1 warns about ignored sections, 2.16.91.0.3 and newer are ok
 #LDFLAGS_NOSTRIP+=$(call check_ld,--gc-sections)
@@ -412,7 +558,9 @@ ifeq ($(LDSO_GNU_HASH_SUPPORT),y)
 # Be sure that binutils support it
 LDFLAGS_GNUHASH:=$(call check_ld,--hash-style=gnu)
 ifeq ($(LDFLAGS_GNUHASH),)
+ifneq ($(filter-out install_headers headers-y,$(MAKECMDGOALS)),)
 $(error Your binutils don't support --hash-style option, while you want to use it)
+endif
 else
 LDFLAGS_NOSTRIP += -Wl,$(LDFLAGS_GNUHASH)
 endif
@@ -420,7 +568,6 @@ endif
 
 LDFLAGS:=$(LDFLAGS_NOSTRIP) -Wl,-z,defs
 ifeq ($(DODEBUG),y)
-#CFLAGS += -g3
 CFLAGS += -O0 -g3
 else
 CFLAGS += $(OPTIMIZATION) $(XARCH_CFLAGS)
@@ -505,12 +652,19 @@ else
 endif
 CFLAGS += -I$(KERNEL_HEADERS)
 
-CFLAGS += -iwithprefix include-fixed -iwithprefix include
+#CFLAGS += -iwithprefix include-fixed -iwithprefix include
+CC_IPREFIX := $(shell $(CC) --print-file-name=include)
+CC_INC := -isystem $(dir $(CC_IPREFIX))include-fixed -isystem $(CC_IPREFIX)
+CFLAGS += $(CC_INC)
 
 ifneq ($(DOASSERTS),y)
 CFLAGS+=-DNDEBUG
 endif
 
+ifeq ($(SYMBOL_PREFIX),_)
+CFLAGS+=-D__UCLIBC_UNDERSCORES__
+endif
+
 # Keep the check_as from being needlessly executed
 ifndef ASFLAGS_NOEXEC
 ifeq ($(UCLIBC_BUILD_NOEXECSTACK),y)
@@ -530,3 +684,5 @@ ifeq ($(UCLIBC_CTOR_DTOR),y)
 SHARED_START_FILES:=$(top_builddir)lib/crti.o $(LIBGCC_DIR)crtbeginS.o
 SHARED_END_FILES:=$(LIBGCC_DIR)crtendS.o $(top_builddir)lib/crtn.o
 endif
+
+LOCAL_INSTALL_PATH := install_dir