+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`getconf ARG_MAX 2> /dev/null`
+ if test -n $lt_cv_sys_max_cmd_len; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+ echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+echo "$as_me:$LINENO: result: $xsi_shell" >&5
+echo "${ECHO_T}$xsi_shell" >&6
+
+
+echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+echo "${ECHO_T}$lt_shell_append" >&6
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AR=$ac_ct_AR
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+ echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 4872 "configure"' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ lt_cv_cc_needs_belf=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *) LD="${LD-ld} -64" ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+if test "${lt_cv_objdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:5972: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:5976: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ if test "$host_cpu" = m68k; then
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ fi
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic='-qnocommon'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
+
+ mingw* | cygwin* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ icc* | ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+
+
+
+
+
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:6294: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:6298: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
+
+if test x"$lt_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_static_works=yes
+ fi
+ else
+ lt_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:6399: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:6403: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:6454: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:6458: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+ if test "$hard_links" = no; then
+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ if test "$host_cpu" = m68k; then
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ fi
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can't use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ *)
+ tmp_sharedflag='-shared' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ if test "$host_cpu" = m68k; then
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ fi
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[012])
+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ ;;
+ esac
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ whole_archive_flag_spec=''
+ link_all_deplibs=yes
+ if test "$GCC" = yes ; then
+ if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi-module to the
+ # link flags.
+ echo "int foo(void){return 1;}" > conftest.c
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib ${wl}-single_module conftest.c
+ if test -f libconftest.dylib; then
+ lt_cv_apple_cc_single_mod=yes
+ rm libconftest.dylib
+ fi
+ rm conftest.$ac_ext
+ fi
+fi
+
+ output_verbose_link_cmd=echo
+ if test "X$lt_cv_apple_cc_single_mod" = Xyes ; then
+ archive_cmds='$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ archive_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $single_module -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ archive_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ module_expsym_cmds='sed -e "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd=echo
+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO $rpath/$soname` $verstring'
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ archive_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc=no
+ else
+ archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+withGCC=$GCC
+if test "$withGCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix4* | aix5*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ if test "$host_cpu" = m68k; then
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ else
+ dynamic_linker=no
+ fi
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $withGCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir"; then
+ shlibpath_overrides_runpath=yes
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shl_load (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_shl_load=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+ lt_cv_dlopen="shl_load"
+else
+ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dld_shl_load=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+ echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char dlopen (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+ lt_cv_dlopen="dlopen"
+else
+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_svld_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dld_dld_link=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 9251 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ exit (status);
+}
+_LT_EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 9351 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ exit (status);
+}
+_LT_EOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ ;;
+ *)
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix4* | aix5*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi;
+ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+for ac_header in sys/mman.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------- ##
+## Report this to http://gcc.gnu.org/bugs.html ##
+## ------------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in mmap
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+if test "${ac_cv_header_sys_mman_h+set}" = set; then
+ echo "$as_me:$LINENO: checking for sys/mman.h" >&5
+echo $ECHO_N "checking for sys/mman.h... $ECHO_C" >&6
+if test "${ac_cv_header_sys_mman_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_mman_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_mman_h" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking sys/mman.h usability" >&5
+echo $ECHO_N "checking sys/mman.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <sys/mman.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking sys/mman.h presence" >&5
+echo $ECHO_N "checking sys/mman.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/mman.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: sys/mman.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: sys/mman.h: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: sys/mman.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: sys/mman.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: sys/mman.h: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: sys/mman.h: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: sys/mman.h: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: sys/mman.h: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------- ##
+## Report this to http://gcc.gnu.org/bugs.html ##
+## ------------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for sys/mman.h" >&5
+echo $ECHO_N "checking for sys/mman.h... $ECHO_C" >&6
+if test "${ac_cv_header_sys_mman_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_sys_mman_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_mman_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_mman_h" >&6
+
+fi
+if test $ac_cv_header_sys_mman_h = yes; then
+ libffi_header_sys_mman_h=yes
+else
+ libffi_header_sys_mman_h=no
+fi
+
+
+echo "$as_me:$LINENO: checking for mmap" >&5
+echo $ECHO_N "checking for mmap... $ECHO_C" >&6
+if test "${ac_cv_func_mmap+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define mmap to an innocuous variant, in case <limits.h> declares mmap.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define mmap innocuous_mmap
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char mmap (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef mmap
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char mmap ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_mmap) || defined (__stub___mmap)
+choke me
+#else
+char (*f) () = mmap;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != mmap;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_mmap=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_mmap=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_mmap" >&5
+echo "${ECHO_T}$ac_cv_func_mmap" >&6
+if test $ac_cv_func_mmap = yes; then
+ libffi_func_mmap=yes
+else
+ libffi_func_mmap=no
+fi
+
+if test "$libffi_header_sys_mman_h" != yes \
+ || test "$libffi_func_mmap" != yes; then
+ ac_cv_func_mmap_file=no
+ ac_cv_func_mmap_dev_zero=no
+ ac_cv_func_mmap_anon=no
+else
+ echo "$as_me:$LINENO: checking whether read-only mmap of a plain file works" >&5
+echo $ECHO_N "checking whether read-only mmap of a plain file works... $ECHO_C" >&6
+if test "${ac_cv_func_mmap_file+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Add a system to this blacklist if
+ # mmap(0, stat_size, PROT_READ, MAP_PRIVATE, fd, 0) doesn't return a
+ # memory area containing the same data that you'd get if you applied
+ # read() to the same fd. The only system known to have a problem here
+ # is VMS, where text files have record structure.
+ case "$host_os" in
+ vms* | ultrix*)
+ ac_cv_func_mmap_file=no ;;
+ *)
+ ac_cv_func_mmap_file=yes;;
+ esac
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5
+echo "${ECHO_T}$ac_cv_func_mmap_file" >&6
+ echo "$as_me:$LINENO: checking whether mmap from /dev/zero works" >&5
+echo $ECHO_N "checking whether mmap from /dev/zero works... $ECHO_C" >&6
+if test "${ac_cv_func_mmap_dev_zero+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Add a system to this blacklist if it has mmap() but /dev/zero
+ # does not exist, or if mmapping /dev/zero does not give anonymous
+ # zeroed pages with both the following properties:
+ # 1. If you map N consecutive pages in with one call, and then
+ # unmap any subset of those pages, the pages that were not
+ # explicitly unmapped remain accessible.
+ # 2. If you map two adjacent blocks of memory and then unmap them
+ # both at once, they must both go away.
+ # Systems known to be in this category are Windows (all variants),
+ # VMS, and Darwin.
+ case "$host_os" in
+ vms* | cygwin* | pe | mingw* | darwin* | ultrix* | hpux10* | hpux11.00)
+ ac_cv_func_mmap_dev_zero=no ;;
+ *)
+ ac_cv_func_mmap_dev_zero=yes;;
+ esac
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_dev_zero" >&5
+echo "${ECHO_T}$ac_cv_func_mmap_dev_zero" >&6
+
+ # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for.
+ echo "$as_me:$LINENO: checking for MAP_ANON(YMOUS)" >&5
+echo $ECHO_N "checking for MAP_ANON(YMOUS)... $ECHO_C" >&6
+if test "${ac_cv_decl_map_anon+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#ifndef MAP_ANONYMOUS
+#define MAP_ANONYMOUS MAP_ANON
+#endif
+
+int
+main ()
+{
+int n = MAP_ANONYMOUS;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_decl_map_anon=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_decl_map_anon=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_decl_map_anon" >&5
+echo "${ECHO_T}$ac_cv_decl_map_anon" >&6
+
+ if test $ac_cv_decl_map_anon = no; then
+ ac_cv_func_mmap_anon=no
+ else
+ echo "$as_me:$LINENO: checking whether mmap with MAP_ANON(YMOUS) works" >&5
+echo $ECHO_N "checking whether mmap with MAP_ANON(YMOUS) works... $ECHO_C" >&6
+if test "${ac_cv_func_mmap_anon+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Add a system to this blacklist if it has mmap() and MAP_ANON or
+ # MAP_ANONYMOUS, but using mmap(..., MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
+ # doesn't give anonymous zeroed pages with the same properties listed
+ # above for use of /dev/zero.
+ # Systems known to be in this category are Windows, VMS, and SCO Unix.
+ case "$host_os" in
+ vms* | cygwin* | pe | mingw* | sco* | udk* )
+ ac_cv_func_mmap_anon=no ;;
+ *)
+ ac_cv_func_mmap_anon=yes;;
+ esac
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_anon" >&5
+echo "${ECHO_T}$ac_cv_func_mmap_anon" >&6
+ fi
+fi
+
+if test $ac_cv_func_mmap_file = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MMAP_FILE 1
+_ACEOF
+
+fi
+if test $ac_cv_func_mmap_dev_zero = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MMAP_DEV_ZERO 1
+_ACEOF
+
+fi
+if test $ac_cv_func_mmap_anon = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MMAP_ANON 1
+_ACEOF
+
+fi
+
+
+
+
+if test -d $srcdir/testsuite; then
+ TESTSUBDIR_TRUE=
+ TESTSUBDIR_FALSE='#'
+else
+ TESTSUBDIR_TRUE='#'
+ TESTSUBDIR_FALSE=
+fi
+
+
+TARGETDIR="unknown"
+case "$host" in
+ alpha*-*-*)
+ TARGET=ALPHA; TARGETDIR=alpha;
+ # Support 128-bit long double, changable via command-line switch.
+ HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
+ ;;
+
+ arm*-*-*)
+ TARGET=ARM; TARGETDIR=arm
+ ;;
+
+ cris-*-*)
+ TARGET=LIBFFI_CRIS; TARGETDIR=cris
+ ;;
+
+ frv-*-*)
+ TARGET=FRV; TARGETDIR=frv
+ ;;
+
+ hppa*-*-linux* | parisc*-*-linux*)
+ TARGET=PA_LINUX; TARGETDIR=pa
+ ;;
+ hppa*64-*-hpux*)
+ TARGET=PA64_HPUX; TARGETDIR=pa
+ ;;
+ hppa*-*-hpux*)
+ TARGET=PA_HPUX; TARGETDIR=pa
+ ;;
+
+ i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*)
+ TARGET=X86_WIN32; TARGETDIR=x86
+ ;;
+ i?86-*-darwin*)
+ TARGET=X86_DARWIN; TARGETDIR=x86
+ ;;
+ i?86-*-solaris2.1[0-9]*)
+ TARGET=X86_64; TARGETDIR=x86
+ ;;
+ i?86-*-*)
+ TARGET=X86; TARGETDIR=x86
+ ;;
+
+ ia64*-*-*)
+ TARGET=IA64; TARGETDIR=ia64
+ ;;
+
+ m32r*-*-*)
+ TARGET=M32R; TARGETDIR=m32r
+ ;;
+
+ m68k-*-*)
+ TARGET=M68K; TARGETDIR=m68k
+ ;;
+
+ mips64*-*)
+ ;;
+ mips-sgi-irix5.* | mips-sgi-irix6.*)
+ TARGET=MIPS_IRIX; TARGETDIR=mips
+ ;;
+ mips*-*-linux*)
+ TARGET=MIPS_LINUX; TARGETDIR=mips
+ ;;
+
+ powerpc*-*-linux* | powerpc-*-sysv*)
+ TARGET=POWERPC; TARGETDIR=powerpc
+ ;;
+ powerpc-*-beos*)
+ TARGET=POWERPC; TARGETDIR=powerpc
+ ;;
+ powerpc-*-darwin*)
+ TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ TARGET=POWERPC_AIX; TARGETDIR=powerpc
+ ;;
+ powerpc-*-freebsd*)
+ TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
+ ;;
+ powerpc*-*-rtems*)
+ TARGET=POWERPC; TARGETDIR=powerpc
+ ;;
+
+ s390-*-* | s390x-*-*)
+ TARGET=S390; TARGETDIR=s390
+ ;;
+
+ sh-*-* | sh[34]*-*-*)
+ TARGET=SH; TARGETDIR=sh
+ ;;
+ sh64-*-* | sh5*-*-*)
+ TARGET=SH64; TARGETDIR=sh64
+ ;;
+
+ sparc*-*-*)
+ TARGET=SPARC; TARGETDIR=sparc
+ ;;
+
+ x86_64-*-darwin*)
+ TARGET=X86_DARWIN; TARGETDIR=x86
+ ;;
+ x86_64-*-cygwin* | x86_64-*-mingw*)
+ ;;
+ x86_64-*-*)
+ TARGET=X86_64; TARGETDIR=x86
+ ;;
+esac
+
+
+
+if test $TARGETDIR = unknown; then
+ { { echo "$as_me:$LINENO: error: \"libffi has not been ported to $host.\"" >&5
+echo "$as_me: error: \"libffi has not been ported to $host.\"" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+
+if test x$TARGET = xMIPS_IRIX; then
+ MIPS_IRIX_TRUE=
+ MIPS_IRIX_FALSE='#'
+else
+ MIPS_IRIX_TRUE='#'
+ MIPS_IRIX_FALSE=
+fi
+
+
+
+if test x$TARGET = xMIPS_LINUX; then
+ MIPS_LINUX_TRUE=
+ MIPS_LINUX_FALSE='#'
+else
+ MIPS_LINUX_TRUE='#'
+ MIPS_LINUX_FALSE=
+fi
+
+
+
+if test x$TARGET = xSPARC; then
+ SPARC_TRUE=
+ SPARC_FALSE='#'
+else
+ SPARC_TRUE='#'
+ SPARC_FALSE=
+fi
+
+
+
+if test x$TARGET = xX86; then
+ X86_TRUE=
+ X86_FALSE='#'
+else
+ X86_TRUE='#'
+ X86_FALSE=
+fi
+
+
+
+if test x$TARGET = xX86_WIN32; then
+ X86_WIN32_TRUE=
+ X86_WIN32_FALSE='#'
+else
+ X86_WIN32_TRUE='#'
+ X86_WIN32_FALSE=
+fi
+
+
+
+if test x$TARGET = xX86_DARWIN; then
+ X86_DARWIN_TRUE=
+ X86_DARWIN_FALSE='#'
+else
+ X86_DARWIN_TRUE='#'
+ X86_DARWIN_FALSE=
+fi
+
+
+
+if test x$TARGET = xALPHA; then
+ ALPHA_TRUE=
+ ALPHA_FALSE='#'
+else
+ ALPHA_TRUE='#'
+ ALPHA_FALSE=
+fi
+
+
+
+if test x$TARGET = xIA64; then
+ IA64_TRUE=
+ IA64_FALSE='#'
+else
+ IA64_TRUE='#'
+ IA64_FALSE=
+fi
+
+
+
+if test x$TARGET = xM32R; then
+ M32R_TRUE=
+ M32R_FALSE='#'
+else
+ M32R_TRUE='#'
+ M32R_FALSE=
+fi
+
+
+
+if test x$TARGET = xM68K; then
+ M68K_TRUE=
+ M68K_FALSE='#'
+else
+ M68K_TRUE='#'
+ M68K_FALSE=
+fi
+
+
+
+if test x$TARGET = xPOWERPC; then
+ POWERPC_TRUE=
+ POWERPC_FALSE='#'
+else
+ POWERPC_TRUE='#'
+ POWERPC_FALSE=
+fi
+
+
+
+if test x$TARGET = xPOWERPC_AIX; then
+ POWERPC_AIX_TRUE=
+ POWERPC_AIX_FALSE='#'
+else
+ POWERPC_AIX_TRUE='#'
+ POWERPC_AIX_FALSE=
+fi
+
+
+
+if test x$TARGET = xPOWERPC_DARWIN; then
+ POWERPC_DARWIN_TRUE=
+ POWERPC_DARWIN_FALSE='#'
+else
+ POWERPC_DARWIN_TRUE='#'
+ POWERPC_DARWIN_FALSE=
+fi
+
+
+
+if test x$TARGET = xPOWERPC_FREEBSD; then
+ POWERPC_FREEBSD_TRUE=
+ POWERPC_FREEBSD_FALSE='#'
+else
+ POWERPC_FREEBSD_TRUE='#'
+ POWERPC_FREEBSD_FALSE=
+fi
+
+
+
+if test x$TARGET = xARM; then
+ ARM_TRUE=
+ ARM_FALSE='#'
+else
+ ARM_TRUE='#'
+ ARM_FALSE=
+fi
+
+
+
+if test x$TARGET = xLIBFFI_CRIS; then
+ LIBFFI_CRIS_TRUE=
+ LIBFFI_CRIS_FALSE='#'
+else
+ LIBFFI_CRIS_TRUE='#'
+ LIBFFI_CRIS_FALSE=
+fi
+
+
+
+if test x$TARGET = xFRV; then
+ FRV_TRUE=
+ FRV_FALSE='#'
+else
+ FRV_TRUE='#'
+ FRV_FALSE=
+fi
+
+
+
+if test x$TARGET = xS390; then
+ S390_TRUE=
+ S390_FALSE='#'
+else
+ S390_TRUE='#'
+ S390_FALSE=
+fi
+
+
+
+if test x$TARGET = xX86_64; then
+ X86_64_TRUE=
+ X86_64_FALSE='#'
+else
+ X86_64_TRUE='#'
+ X86_64_FALSE=
+fi
+
+
+
+if test x$TARGET = xSH; then
+ SH_TRUE=
+ SH_FALSE='#'
+else
+ SH_TRUE='#'
+ SH_FALSE=
+fi
+
+
+
+if test x$TARGET = xSH64; then
+ SH64_TRUE=
+ SH64_FALSE='#'
+else
+ SH64_TRUE='#'
+ SH64_FALSE=
+fi
+
+
+
+if test x$TARGET = xPA_LINUX; then
+ PA_LINUX_TRUE=
+ PA_LINUX_FALSE='#'
+else
+ PA_LINUX_TRUE='#'
+ PA_LINUX_FALSE=
+fi
+
+
+
+if test x$TARGET = xPA_HPUX; then
+ PA_HPUX_TRUE=
+ PA_HPUX_FALSE='#'
+else
+ PA_HPUX_TRUE='#'
+ PA_HPUX_FALSE=
+fi
+
+
+
+if test x$TARGET = xPA64_HPUX; then
+ PA64_HPUX_TRUE=
+ PA64_HPUX_FALSE='#'
+else
+ PA64_HPUX_TRUE='#'
+ PA64_HPUX_FALSE=
+fi
+
+
+case x$TARGET in
+ xMIPS*) TARGET=MIPS ;;
+ *) ;;
+esac
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+
+for ac_func in memcpy
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments. Useless!
+echo "$as_me:$LINENO: checking for working alloca.h" >&5
+echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6
+if test "${ac_cv_working_alloca_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_working_alloca_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_working_alloca_h=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
+echo "${ECHO_T}$ac_cv_working_alloca_h" >&6
+if test $ac_cv_working_alloca_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ALLOCA_H 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for alloca" >&5
+echo $ECHO_N "checking for alloca... $ECHO_C" >&6
+if test "${ac_cv_func_alloca_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if HAVE_ALLOCA_H
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_alloca_works=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_alloca_works=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
+echo "${ECHO_T}$ac_cv_func_alloca_works" >&6
+
+if test $ac_cv_func_alloca_works = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ALLOCA 1
+_ACEOF
+
+else
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble. Some versions do not even contain alloca or
+# contain a buggy version. If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=alloca.$ac_objext
+
+cat >>confdefs.h <<\_ACEOF
+#define C_ALLOCA 1
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
+echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6
+if test "${ac_cv_os_cray+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "webecray" >/dev/null 2>&1; then
+ ac_cv_os_cray=yes
+else
+ ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
+echo "${ECHO_T}$ac_cv_os_cray" >&6
+if test $ac_cv_os_cray = yes; then
+ for ac_func in _getb67 GETB67 getb67; do
+ as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+ break
+fi
+
+ done
+fi
+
+echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
+echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6
+if test "${ac_cv_c_stack_direction+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_stack_direction=0
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
+find_stack_direction ()
+{
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+
+int
+main ()
+{
+ exit (find_stack_direction () < 0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_stack_direction=1
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
+echo "${ECHO_T}$ac_cv_c_stack_direction" >&6
+
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+
+fi
+
+
+echo "$as_me:$LINENO: checking for double" >&5
+echo $ECHO_N "checking for double... $ECHO_C" >&6
+if test "${ac_cv_type_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((double *) 0)
+ return 0;
+if (sizeof (double))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_double=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_double=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_double" >&5
+echo "${ECHO_T}$ac_cv_type_double" >&6
+
+echo "$as_me:$LINENO: checking size of double" >&5
+echo $ECHO_N "checking size of double... $ECHO_C" >&6
+if test "${ac_cv_sizeof_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_double" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_double=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (double)); }
+unsigned long ulongval () { return (long) (sizeof (double)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (double))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (double))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (double))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_double=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_double=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_double" >&5
+echo "${ECHO_T}$ac_cv_sizeof_double" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_DOUBLE $ac_cv_sizeof_double
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for long double" >&5
+echo $ECHO_N "checking for long double... $ECHO_C" >&6
+if test "${ac_cv_type_long_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long double *) 0)
+ return 0;
+if (sizeof (long double))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long_double=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long_double=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long_double" >&5
+echo "${ECHO_T}$ac_cv_type_long_double" >&6
+
+echo "$as_me:$LINENO: checking size of long double" >&5
+echo $ECHO_N "checking size of long double... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_long_double" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long_double=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (long double)); }
+unsigned long ulongval () { return (long) (sizeof (long double)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (long double))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (long double))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (long double))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_long_double=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_long_double=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_double" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long_double" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG_DOUBLE $ac_cv_sizeof_long_double
+_ACEOF
+
+
+
+# Also AC_SUBST this variable for ffi.h.
+if test -z "$HAVE_LONG_DOUBLE"; then
+ HAVE_LONG_DOUBLE=0
+ if test $ac_cv_sizeof_double != $ac_cv_sizeof_long_double; then
+ if test $ac_cv_sizeof_long_double != 0; then
+ HAVE_LONG_DOUBLE=1
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LONG_DOUBLE 1
+_ACEOF
+
+ fi
+ fi
+fi
+
+
+echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
+if test "${ac_cv_c_bigendian+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # See if sys/param.h defines the BYTE_ORDER macro.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/param.h>
+
+int
+main ()
+{
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_bigendian=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+# It does not; compile a test program.
+if test "$cross_compiling" = yes; then
+ # try to guess the endianness by grepping values into an object file
+ ac_cv_c_bigendian=unknown
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+int
+main ()
+{
+ _ascii (); _ebcdic ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+ ac_cv_c_bigendian=yes
+fi
+if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
+main ()
+{
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=no
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_bigendian=yes
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+echo "${ECHO_T}$ac_cv_c_bigendian" >&6
+case $ac_cv_c_bigendian in
+ yes)
+
+cat >>confdefs.h <<\_ACEOF
+#define WORDS_BIGENDIAN 1
+_ACEOF
+ ;;
+ no)
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+echo "$as_me: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+
+
+echo "$as_me:$LINENO: checking assembler .cfi pseudo-op support" >&5
+echo $ECHO_N "checking assembler .cfi pseudo-op support... $ECHO_C" >&6
+if test "${libffi_cv_as_cfi_pseudo_op+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ libffi_cv_as_cfi_pseudo_op=unknown
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+asm (".cfi_startproc\n\t.cfi_endproc");
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ libffi_cv_as_cfi_pseudo_op=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+libffi_cv_as_cfi_pseudo_op=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $libffi_cv_as_cfi_pseudo_op" >&5
+echo "${ECHO_T}$libffi_cv_as_cfi_pseudo_op" >&6
+if test "x$libffi_cv_as_cfi_pseudo_op" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_CFI_PSEUDO_OP 1
+_ACEOF
+
+fi
+
+if test x$TARGET = xSPARC; then
+ echo "$as_me:$LINENO: checking assembler and linker support unaligned pc related relocs" >&5
+echo $ECHO_N "checking assembler and linker support unaligned pc related relocs... $ECHO_C" >&6
+if test "${libffi_cv_as_sparc_ua_pcrel+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ save_CFLAGS="$CFLAGS"
+ save_LDFLAGS="$LDFLAGS"
+ CFLAGS="$CFLAGS -fpic"
+ LDFLAGS="$LDFLAGS -shared"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text");
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ libffi_cv_as_sparc_ua_pcrel=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+libffi_cv_as_sparc_ua_pcrel=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+fi
+echo "$as_me:$LINENO: result: $libffi_cv_as_sparc_ua_pcrel" >&5
+echo "${ECHO_T}$libffi_cv_as_sparc_ua_pcrel" >&6
+ if test "x$libffi_cv_as_sparc_ua_pcrel" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_SPARC_UA_PCREL 1
+_ACEOF
+
+ fi
+
+ echo "$as_me:$LINENO: checking assembler .register pseudo-op support" >&5
+echo $ECHO_N "checking assembler .register pseudo-op support... $ECHO_C" >&6
+if test "${libffi_cv_as_register_pseudo_op+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ libffi_cv_as_register_pseudo_op=unknown
+ # Check if we have .register
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+asm (".register %g2, #scratch");
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ libffi_cv_as_register_pseudo_op=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+libffi_cv_as_register_pseudo_op=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $libffi_cv_as_register_pseudo_op" >&5
+echo "${ECHO_T}$libffi_cv_as_register_pseudo_op" >&6
+ if test "x$libffi_cv_as_register_pseudo_op" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_AS_REGISTER_PSEUDO_OP 1
+_ACEOF
+
+ fi
+fi
+
+echo "$as_me:$LINENO: checking whether .eh_frame section should be read-only" >&5
+echo $ECHO_N "checking whether .eh_frame section should be read-only... $ECHO_C" >&6
+if test "${libffi_cv_ro_eh_frame+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ libffi_cv_ro_eh_frame=no
+ echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+ if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
+ if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
+ libffi_cv_ro_eh_frame=yes
+ elif grep '.section.*eh_frame.*#alloc' conftest.c \
+ | grep -v '#write' > /dev/null; then
+ libffi_cv_ro_eh_frame=yes
+ fi
+ fi
+ rm -f conftest.*
+
+fi
+echo "$as_me:$LINENO: result: $libffi_cv_ro_eh_frame" >&5
+echo "${ECHO_T}$libffi_cv_ro_eh_frame" >&6
+if test "x$libffi_cv_ro_eh_frame" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_RO_EH_FRAME 1
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define EH_FRAME_FLAGS "a"
+_ACEOF
+
+else
+
+cat >>confdefs.h <<\_ACEOF
+#define EH_FRAME_FLAGS "aw"
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for __attribute__((visibility(\"hidden\")))" >&5
+echo $ECHO_N "checking for __attribute__((visibility(\"hidden\")))... $ECHO_C" >&6
+if test "${libffi_cv_hidden_visibility_attribute+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
+ libffi_cv_hidden_visibility_attribute=no
+ if { ac_try='${CC-cc} -Werror -S conftest.c -o conftest.s 1>&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if grep '\.hidden.*foo' conftest.s >/dev/null; then
+ libffi_cv_hidden_visibility_attribute=yes
+ fi
+ fi
+ rm -f conftest.*
+
+fi
+echo "$as_me:$LINENO: result: $libffi_cv_hidden_visibility_attribute" >&5
+echo "${ECHO_T}$libffi_cv_hidden_visibility_attribute" >&6
+if test $libffi_cv_hidden_visibility_attribute = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_HIDDEN_VISIBILITY_ATTRIBUTE 1
+_ACEOF
+
+fi
+
+
+
+
+
+
+
+
+
+# Check whether --enable-debug or --disable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval="$enable_debug"
+ if test "$enable_debug" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FFI_DEBUG 1
+_ACEOF
+
+ fi
+fi;
+
+# Check whether --enable-structs or --disable-structs was given.
+if test "${enable_structs+set}" = set; then
+ enableval="$enable_structs"
+ if test "$enable_structs" = "no"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FFI_NO_STRUCTS 1
+_ACEOF
+
+ fi
+fi;
+
+# Check whether --enable-raw-api or --disable-raw-api was given.
+if test "${enable_raw_api+set}" = set; then
+ enableval="$enable_raw_api"
+ if test "$enable_raw_api" = "no"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FFI_NO_RAW_API 1
+_ACEOF
+
+ fi
+fi;
+
+# Check whether --enable-purify-safety or --disable-purify-safety was given.
+if test "${enable_purify_safety+set}" = set; then
+ enableval="$enable_purify_safety"
+ if test "$enable_purify_safety" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define USING_PURIFY 1
+_ACEOF
+
+ fi
+fi;
+
+if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ toolexecdir='$(exec_prefix)/$(target_alias)'
+ toolexeclibdir='$(toolexecdir)/lib'
+else
+ toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ toolexeclibdir='$(libdir)'
+fi
+multi_os_directory=`$CC -print-multi-os-directory`
+case $multi_os_directory in
+ .) ;; # Avoid trailing /.
+ *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+esac
+
+
+
+if test "${multilib}" = "yes"; then
+ multilib_arg="--enable-multilib"
+else
+ multilib_arg=
+fi
+
+ ac_config_commands="$ac_config_commands include"
+
+ ac_config_commands="$ac_config_commands src"
+
+
+ ac_config_links="$ac_config_links include/ffitarget.h:src/$TARGETDIR/ffitarget.h"
+
+
+ ac_config_files="$ac_config_files include/Makefile include/ffi.h Makefile testsuite/Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${TESTSUBDIR_TRUE}" && test -z "${TESTSUBDIR_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"TESTSUBDIR\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"TESTSUBDIR\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${MIPS_IRIX_TRUE}" && test -z "${MIPS_IRIX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"MIPS_IRIX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MIPS_IRIX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${MIPS_LINUX_TRUE}" && test -z "${MIPS_LINUX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"MIPS_LINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MIPS_LINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${SPARC_TRUE}" && test -z "${SPARC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"SPARC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"SPARC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${X86_TRUE}" && test -z "${X86_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"X86\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"X86\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${X86_WIN32_TRUE}" && test -z "${X86_WIN32_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"X86_WIN32\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"X86_WIN32\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${X86_DARWIN_TRUE}" && test -z "${X86_DARWIN_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"X86_DARWIN\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"X86_DARWIN\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ALPHA_TRUE}" && test -z "${ALPHA_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ALPHA\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ALPHA\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${IA64_TRUE}" && test -z "${IA64_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"IA64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"IA64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${M32R_TRUE}" && test -z "${M32R_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"M32R\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"M32R\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${M68K_TRUE}" && test -z "${M68K_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"M68K\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"M68K\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${POWERPC_TRUE}" && test -z "${POWERPC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"POWERPC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"POWERPC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${POWERPC_AIX_TRUE}" && test -z "${POWERPC_AIX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"POWERPC_AIX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"POWERPC_AIX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${POWERPC_DARWIN_TRUE}" && test -z "${POWERPC_DARWIN_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"POWERPC_DARWIN\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"POWERPC_DARWIN\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${POWERPC_FREEBSD_TRUE}" && test -z "${POWERPC_FREEBSD_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"POWERPC_FREEBSD\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"POWERPC_FREEBSD\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${ARM_TRUE}" && test -z "${ARM_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"ARM\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ARM\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${LIBFFI_CRIS_TRUE}" && test -z "${LIBFFI_CRIS_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"LIBFFI_CRIS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"LIBFFI_CRIS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${FRV_TRUE}" && test -z "${FRV_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"FRV\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"FRV\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${S390_TRUE}" && test -z "${S390_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"S390\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"S390\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${X86_64_TRUE}" && test -z "${X86_64_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"X86_64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"X86_64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${SH_TRUE}" && test -z "${SH_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"SH\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"SH\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${SH64_TRUE}" && test -z "${SH64_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"SH64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"SH64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${PA_LINUX_TRUE}" && test -z "${PA_LINUX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"PA_LINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"PA_LINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${PA_HPUX_TRUE}" && test -z "${PA_HPUX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"PA_HPUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"PA_HPUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${PA64_HPUX_TRUE}" && test -z "${PA64_HPUX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"PA64_HPUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"PA64_HPUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by libffi $as_me 2.1, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration links:
+$config_links
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+libffi config.status 2.1
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+
+srcdir="$srcdir"
+host="$host"
+target="$target"
+with_multisubdir="$with_multisubdir"
+with_multisrctop="$with_multisrctop"
+with_target_subdir="$with_target_subdir"
+ac_configure_args="${multilib_arg} ${ac_configure_args}"
+multi_basedir="$multi_basedir"
+CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+CC="$CC"
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+ ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+TARGETDIR="$TARGETDIR"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
+ "include/ffi.h" ) CONFIG_FILES="$CONFIG_FILES include/ffi.h" ;;
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "testsuite/Makefile" ) CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
+ "include/ffitarget.h" ) CONFIG_LINKS="$CONFIG_LINKS include/ffitarget.h:src/$TARGETDIR/ffitarget.h" ;;
+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "include" ) CONFIG_COMMANDS="$CONFIG_COMMANDS include" ;;
+ "src" ) CONFIG_COMMANDS="$CONFIG_COMMANDS src" ;;
+ "fficonfig.h" ) CONFIG_HEADERS="$CONFIG_HEADERS fficonfig.h" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@multi_basedir@,$multi_basedir,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@CC@,$CC,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@CCAS@,$CCAS,;t t
+s,@CCASFLAGS@,$CCASFLAGS,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
+s,@SED@,$SED,;t t
+s,@EGREP@,$EGREP,;t t
+s,@FGREP@,$FGREP,;t t
+s,@GREP@,$GREP,;t t
+s,@LD@,$LD,;t t
+s,@DUMPBIN@,$DUMPBIN,;t t
+s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t
+s,@NM@,$NM,;t t
+s,@LN_S@,$LN_S,;t t
+s,@AR@,$AR,;t t
+s,@ac_ct_AR@,$ac_ct_AR,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@lt_ECHO@,$lt_ECHO,;t t
+s,@CPP@,$CPP,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
+s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
+s,@MAINT@,$MAINT,;t t
+s,@TESTSUBDIR_TRUE@,$TESTSUBDIR_TRUE,;t t
+s,@TESTSUBDIR_FALSE@,$TESTSUBDIR_FALSE,;t t
+s,@AM_RUNTESTFLAGS@,$AM_RUNTESTFLAGS,;t t
+s,@MIPS_IRIX_TRUE@,$MIPS_IRIX_TRUE,;t t
+s,@MIPS_IRIX_FALSE@,$MIPS_IRIX_FALSE,;t t
+s,@MIPS_LINUX_TRUE@,$MIPS_LINUX_TRUE,;t t
+s,@MIPS_LINUX_FALSE@,$MIPS_LINUX_FALSE,;t t
+s,@SPARC_TRUE@,$SPARC_TRUE,;t t
+s,@SPARC_FALSE@,$SPARC_FALSE,;t t
+s,@X86_TRUE@,$X86_TRUE,;t t
+s,@X86_FALSE@,$X86_FALSE,;t t
+s,@X86_WIN32_TRUE@,$X86_WIN32_TRUE,;t t
+s,@X86_WIN32_FALSE@,$X86_WIN32_FALSE,;t t
+s,@X86_DARWIN_TRUE@,$X86_DARWIN_TRUE,;t t
+s,@X86_DARWIN_FALSE@,$X86_DARWIN_FALSE,;t t
+s,@ALPHA_TRUE@,$ALPHA_TRUE,;t t
+s,@ALPHA_FALSE@,$ALPHA_FALSE,;t t
+s,@IA64_TRUE@,$IA64_TRUE,;t t
+s,@IA64_FALSE@,$IA64_FALSE,;t t
+s,@M32R_TRUE@,$M32R_TRUE,;t t
+s,@M32R_FALSE@,$M32R_FALSE,;t t
+s,@M68K_TRUE@,$M68K_TRUE,;t t
+s,@M68K_FALSE@,$M68K_FALSE,;t t
+s,@POWERPC_TRUE@,$POWERPC_TRUE,;t t
+s,@POWERPC_FALSE@,$POWERPC_FALSE,;t t
+s,@POWERPC_AIX_TRUE@,$POWERPC_AIX_TRUE,;t t
+s,@POWERPC_AIX_FALSE@,$POWERPC_AIX_FALSE,;t t
+s,@POWERPC_DARWIN_TRUE@,$POWERPC_DARWIN_TRUE,;t t
+s,@POWERPC_DARWIN_FALSE@,$POWERPC_DARWIN_FALSE,;t t
+s,@POWERPC_FREEBSD_TRUE@,$POWERPC_FREEBSD_TRUE,;t t
+s,@POWERPC_FREEBSD_FALSE@,$POWERPC_FREEBSD_FALSE,;t t
+s,@ARM_TRUE@,$ARM_TRUE,;t t
+s,@ARM_FALSE@,$ARM_FALSE,;t t
+s,@LIBFFI_CRIS_TRUE@,$LIBFFI_CRIS_TRUE,;t t
+s,@LIBFFI_CRIS_FALSE@,$LIBFFI_CRIS_FALSE,;t t
+s,@FRV_TRUE@,$FRV_TRUE,;t t
+s,@FRV_FALSE@,$FRV_FALSE,;t t
+s,@S390_TRUE@,$S390_TRUE,;t t
+s,@S390_FALSE@,$S390_FALSE,;t t
+s,@X86_64_TRUE@,$X86_64_TRUE,;t t
+s,@X86_64_FALSE@,$X86_64_FALSE,;t t
+s,@SH_TRUE@,$SH_TRUE,;t t
+s,@SH_FALSE@,$SH_FALSE,;t t
+s,@SH64_TRUE@,$SH64_TRUE,;t t
+s,@SH64_FALSE@,$SH64_FALSE,;t t
+s,@PA_LINUX_TRUE@,$PA_LINUX_TRUE,;t t
+s,@PA_LINUX_FALSE@,$PA_LINUX_FALSE,;t t
+s,@PA_HPUX_TRUE@,$PA_HPUX_TRUE,;t t
+s,@PA_HPUX_FALSE@,$PA_HPUX_FALSE,;t t
+s,@PA64_HPUX_TRUE@,$PA64_HPUX_TRUE,;t t
+s,@PA64_HPUX_FALSE@,$PA64_HPUX_FALSE,;t t
+s,@ALLOCA@,$ALLOCA,;t t
+s,@HAVE_LONG_DOUBLE@,$HAVE_LONG_DOUBLE,;t t
+s,@TARGET@,$TARGET,;t t
+s,@TARGETDIR@,$TARGETDIR,;t t
+s,@toolexecdir@,$toolexecdir,;t t
+s,@toolexeclibdir@,$toolexeclibdir,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ # Do quote $f, to prevent DOS paths from being IFS'd.
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+ # Remove the trailing spaces.
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h. The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status. Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless. Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo ' :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+ # Write a limited-size here document to $tmp/defines.sed.
+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#define' lines.
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo ' fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+ # Write a limited-size here document to $tmp/undefs.sed.
+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#undef'
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+ rm -f conftest.undefs
+ mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ echo "/* Generated by configure. */" >$tmp/config.h
+ else
+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
+ fi
+ cat $tmp/in >>$tmp/config.h
+ rm -f $tmp/in
+ if test x"$ac_file" != x-; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ rm -f $ac_file
+ mv $tmp/config.h $ac_file
+ fi
+ else
+ cat $tmp/config.h
+ rm -f $tmp/config.h
+ fi
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $ac_file | $ac_file:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X$ac_file : 'X\(//\)[^/]' \| \
+ X$ac_file : 'X\(//\)$' \| \
+ X$ac_file : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_LINKS section.
+#