-#ifdef L_bb
-
-#if LONG_TYPE_SIZE == GCOV_TYPE_SIZE
-typedef long gcov_type;
-#else
-typedef long long gcov_type;
-#endif
-
-
-/* Structure emitted by -a */
-struct bb
-{
- long zero_word;
- const char *filename;
- gcov_type *counts;
- long ncounts;
- struct bb *next;
- const unsigned long *addresses;
-
- /* Older GCC's did not emit these fields. */
- long nwords;
- const char **functions;
- const long *line_nums;
- const char **filenames;
- char *flags;
-};
-
-#ifdef BLOCK_PROFILER_CODE
-BLOCK_PROFILER_CODE
-#else
-#ifndef inhibit_libc
-
-/* Simple minded basic block profiling output dumper for
- systems that don't provide tcov support. At present,
- it requires atexit and stdio. */
-
-#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
-#include <stdio.h>
-
-#include "gbl-ctors.h"
-#include "gcov-io.h"
-#include <string.h>
-#ifdef TARGET_HAS_F_SETLKW
-#include <fcntl.h>
-#include <errno.h>
-#endif
-
-static struct bb *bb_head;
-
-static int num_digits (long long value, int base) __attribute__ ((const));
-
-/* Return the number of digits needed to print a value */
-/* __inline__ */ static int num_digits (long long value, int base)
-{
- int minus = (value < 0 && base != 16);
- unsigned long long v = (minus) ? -value : value;
- int ret = minus;
-
- do
- {
- v /= base;
- ret++;
- }
- while (v);
-
- return ret;
-}
-
-void
-__bb_exit_func (void)
-{
- FILE *da_file, *file;
- long time_value;
- int i;
-
- if (bb_head == 0)
- return;
-
- i = strlen (bb_head->filename) - 3;
-
- if (!strcmp (bb_head->filename+i, ".da"))
- {
- /* Must be -fprofile-arcs not -a.
- Dump data in a form that gcov expects. */
-
- struct bb *ptr;
-
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- int firstchar;
-
- /* Make sure the output file exists -
- but don't clobber exiting data. */
- if ((da_file = fopen (ptr->filename, "a")) != 0)
- fclose (da_file);
-
- /* Need to re-open in order to be able to write from the start. */
- da_file = fopen (ptr->filename, "r+b");
- /* Some old systems might not allow the 'b' mode modifier.
- Therefore, try to open without it. This can lead to a race
- condition so that when you delete and re-create the file, the
- file might be opened in text mode, but then, you shouldn't
- delete the file in the first place. */
- if (da_file == 0)
- da_file = fopen (ptr->filename, "r+");
- if (da_file == 0)
- {
- fprintf (stderr, "arc profiling: Can't open output file %s.\n",
- ptr->filename);
- continue;
- }
-
- /* After a fork, another process might try to read and/or write
- the same file simultanously. So if we can, lock the file to
- avoid race conditions. */
-#if defined (TARGET_HAS_F_SETLKW)
- {
- struct flock s_flock;
-
- s_flock.l_type = F_WRLCK;
- s_flock.l_whence = SEEK_SET;
- s_flock.l_start = 0;
- s_flock.l_len = 1;
- s_flock.l_pid = getpid ();
-
- while (fcntl (fileno (da_file), F_SETLKW, &s_flock)
- && errno == EINTR);
- }
-#endif
-
- /* If the file is not empty, and the number of counts in it is the
- same, then merge them in. */
- firstchar = fgetc (da_file);
- if (firstchar == EOF)
- {
- if (ferror (da_file))
- {
- fprintf (stderr, "arc profiling: Can't read output file ");
- perror (ptr->filename);
- }
- }
- else
- {
- long n_counts = 0;
-
- if (ungetc (firstchar, da_file) == EOF)
- rewind (da_file);
- if (__read_long (&n_counts, da_file, 8) != 0)
- {
- fprintf (stderr, "arc profiling: Can't read output file %s.\n",
- ptr->filename);
- continue;
- }
-
- if (n_counts == ptr->ncounts)
- {
- int i;
-
- for (i = 0; i < n_counts; i++)
- {
- gcov_type v = 0;
-
- if (__read_gcov_type (&v, da_file, 8) != 0)
- {
- fprintf (stderr, "arc profiling: Can't read output file %s.\n",
- ptr->filename);
- break;
- }
- ptr->counts[i] += v;
- }
- }
-
- }
-
- rewind (da_file);
-
- /* ??? Should first write a header to the file. Preferably, a 4 byte
- magic number, 4 bytes containing the time the program was
- compiled, 4 bytes containing the last modification time of the
- source file, and 4 bytes indicating the compiler options used.
-
- That way we can easily verify that the proper source/executable/
- data file combination is being used from gcov. */
-
- if (__write_gcov_type (ptr->ncounts, da_file, 8) != 0)
- {
-
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
- else
- {
- int j;
- gcov_type *count_ptr = ptr->counts;
- int ret = 0;
- for (j = ptr->ncounts; j > 0; j--)
- {
- if (__write_gcov_type (*count_ptr, da_file, 8) != 0)
- {
- ret=1;
- break;
- }
- count_ptr++;
- }
- if (ret)
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
-
- if (fclose (da_file) == EOF)
- fprintf (stderr, "arc profiling: Error closing output file %s.\n",
- ptr->filename);
- }
-
- return;
- }
-
- /* Must be basic block profiling. Emit a human readable output file. */
-
- file = fopen ("bb.out", "a");
-
- if (!file)
- perror ("bb.out");
-
- else
- {
- struct bb *ptr;
-
- /* This is somewhat type incorrect, but it avoids worrying about
- exactly where time.h is included from. It should be ok unless
- a void * differs from other pointer formats, or if sizeof (long)
- is < sizeof (time_t). It would be nice if we could assume the
- use of rationale standards here. */
-
- time ((void *) &time_value);
- fprintf (file, "Basic block profiling finished on %s\n",
- ctime ((void *) &time_value));
-
- /* We check the length field explicitly in order to allow compatibility
- with older GCC's which did not provide it. */
-
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- int i;
- int func_p = (ptr->nwords >= (long) sizeof (struct bb)
- && ptr->nwords <= 1000
- && ptr->functions);
- int line_p = (func_p && ptr->line_nums);
- int file_p = (func_p && ptr->filenames);
- int addr_p = (ptr->addresses != 0);
- long ncounts = ptr->ncounts;
- gcov_type cnt_max = 0;
- long line_max = 0;
- long addr_max = 0;
- int file_len = 0;
- int func_len = 0;
- int blk_len = num_digits (ncounts, 10);
- int cnt_len;
- int line_len;
- int addr_len;
-
- fprintf (file, "File %s, %ld basic blocks \n\n",
- ptr->filename, ncounts);
-
- /* Get max values for each field. */
- for (i = 0; i < ncounts; i++)
- {
- const char *p;
- int len;
-
- if (cnt_max < ptr->counts[i])
- cnt_max = ptr->counts[i];
-
- if (addr_p && (unsigned long) addr_max < ptr->addresses[i])
- addr_max = ptr->addresses[i];
-
- if (line_p && line_max < ptr->line_nums[i])
- line_max = ptr->line_nums[i];
-
- if (func_p)
- {
- p = (ptr->functions[i]) ? (ptr->functions[i]) : "<none>";
- len = strlen (p);
- if (func_len < len)
- func_len = len;
- }
-
- if (file_p)
- {
- p = (ptr->filenames[i]) ? (ptr->filenames[i]) : "<none>";
- len = strlen (p);
- if (file_len < len)
- file_len = len;
- }
- }
-
- addr_len = num_digits (addr_max, 16);
- cnt_len = num_digits (cnt_max, 10);
- line_len = num_digits (line_max, 10);
-
- /* Now print out the basic block information. */
- for (i = 0; i < ncounts; i++)
- {
-#if LONG_TYPE_SIZE == GCOV_TYPE_SIZE
- fprintf (file,
- " Block #%*d: executed %*ld time(s)",
- blk_len, i+1,
- cnt_len, ptr->counts[i]);
-#else
- fprintf (file,
- " Block #%*d: executed %*lld time(s)",
- blk_len, i+1,
- cnt_len, ptr->counts[i]);
-#endif
-
- if (addr_p)
- fprintf (file, " address= 0x%.*lx", addr_len,
- ptr->addresses[i]);
-
- if (func_p)
- fprintf (file, " function= %-*s", func_len,
- (ptr->functions[i]) ? ptr->functions[i] : "<none>");
-
- if (line_p)
- fprintf (file, " line= %*ld", line_len, ptr->line_nums[i]);
-
- if (file_p)
- fprintf (file, " file= %s",
- (ptr->filenames[i]) ? ptr->filenames[i] : "<none>");
-
- fprintf (file, "\n");
- }
-
- fprintf (file, "\n");
- fflush (file);
- }
-
- fprintf (file, "\n\n");
- fclose (file);
- }
-}
-
-void
-__bb_init_func (struct bb *blocks)
-{
- /* User is supposed to check whether the first word is non-0,
- but just in case.... */
-
- if (blocks->zero_word)
- return;
-
- /* Initialize destructor. */
- if (!bb_head)
- atexit (__bb_exit_func);
-
- /* Set up linked list. */
- blocks->zero_word = 1;
- blocks->next = bb_head;
- bb_head = blocks;
-}
-
-/* Called before fork or exec - write out profile information gathered so
- far and reset it to zero. This avoids duplication or loss of the
- profile information gathered so far. */
-void
-__bb_fork_func (void)
-{
- struct bb *ptr;
-
- __bb_exit_func ();
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- long i;
- for (i = ptr->ncounts - 1; i >= 0; i--)
- ptr->counts[i] = 0;
- }
-}
-
-#endif /* not inhibit_libc */
-#endif /* not BLOCK_PROFILER_CODE */
-#endif /* L_bb */