src/system-config/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16 VPATH = @srcdir@
  17 am__is_gnu_make = { \
  18   if test -z '$(MAKELEVEL)'; then \
  19     false; \
  20   elif test -n '$(MAKE_HOST)'; then \
  21     true; \
  22   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  23     true; \
  24   else \
  25     false; \
  26   fi; \
  27 }
  28 am__make_running_with_option = \
  29   case $${target_option-} in \
  30       ?) ;; \
  31       *) echo "am__make_running_with_option: internal error: invalid" \
  32               "target option '$${target_option-}' specified" >&2; \
  33          exit 1;; \
  34   esac; \
  35   has_opt=no; \
  36   sane_makeflags=$$MAKEFLAGS; \
  37   if $(am__is_gnu_make); then \
  38     sane_makeflags=$$MFLAGS; \
  39   else \
  40     case $$MAKEFLAGS in \
  41       *\\[\ \   ]*) \
  42         bs=\\; \
  43         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  44           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  45     esac; \
  46   fi; \
  47   skip_next=no; \
  48   strip_trailopt () \
  49   { \
  50     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  51   }; \
  52   for flg in $$sane_makeflags; do \
  53     test $$skip_next = yes && { skip_next=no; continue; }; \
  54     case $$flg in \
  55       *=*|--*) continue;; \
  56         -*I) strip_trailopt 'I'; skip_next=yes;; \
  57       -*I?*) strip_trailopt 'I';; \
  58         -*O) strip_trailopt 'O'; skip_next=yes;; \
  59       -*O?*) strip_trailopt 'O';; \
  60         -*l) strip_trailopt 'l'; skip_next=yes;; \
  61       -*l?*) strip_trailopt 'l';; \
  62       -[dEDm]) skip_next=yes;; \
  63       -[JT]) skip_next=yes;; \
  64     esac; \
  65     case $$flg in \
  66       *$$target_option*) has_opt=yes; break;; \
  67     esac; \
  68   done; \
  69   test $$has_opt = yes
  70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  72 pkgdatadir = $(datadir)/@PACKAGE@
  73 pkgincludedir = $(includedir)/@PACKAGE@
  74 pkglibdir = $(libdir)/@PACKAGE@
  75 pkglibexecdir = $(libexecdir)/@PACKAGE@
  76 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  77 install_sh_DATA = $(install_sh) -c -m 644
  78 install_sh_PROGRAM = $(install_sh) -c
  79 install_sh_SCRIPT = $(install_sh) -c
  80 INSTALL_HEADER = $(INSTALL_DATA)
  81 transform = $(program_transform_name)
  82 NORMAL_INSTALL = :
  83 PRE_INSTALL = :
  84 POST_INSTALL = :
  85 NORMAL_UNINSTALL = :
  86 PRE_UNINSTALL = :
  87 POST_UNINSTALL = :
  88 subdir = src/system-config
  89 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  90 am__aclocal_m4_deps = $(top_srcdir)/version.ac \
  91         $(top_srcdir)/m4/progs.m4 \
  92         $(top_srcdir)/m4/ax_compare_version.m4 \
  93         $(top_srcdir)/m4/ac_check_docbook_xslt.m4 \
  94         $(top_srcdir)/m4/ac_check_docbook_dtd.m4 \
  95         $(top_srcdir)/m4/ac_check_takaofontdir.m4 \
  96         $(top_srcdir)/configure.ac
  97 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  98         $(ACLOCAL_M4)
  99 DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 100 mkinstalldirs = $(install_sh) -d
 101 CONFIG_HEADER = $(top_builddir)/config.h
 102 CONFIG_CLEAN_FILES =
 103 CONFIG_CLEAN_VPATH_FILES =
 104 AM_V_P = $(am__v_P_@AM_V@)
 105 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 106 am__v_P_0 = false
 107 am__v_P_1 = :
 108 AM_V_GEN = $(am__v_GEN_@AM_V@)
 109 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 110 am__v_GEN_0 = @echo "  GEN     " $@;
 111 am__v_GEN_1 =
 112 AM_V_at = $(am__v_at_@AM_V@)
 113 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 114 am__v_at_0 = @
 115 am__v_at_1 =
 116 SOURCES =
 117 DIST_SOURCES =
 118 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 119         ctags-recursive dvi-recursive html-recursive info-recursive \
 120         install-data-recursive install-dvi-recursive \
 121         install-exec-recursive install-html-recursive \
 122         install-info-recursive install-pdf-recursive \
 123         install-ps-recursive install-recursive installcheck-recursive \
 124         installdirs-recursive pdf-recursive ps-recursive \
 125         tags-recursive uninstall-recursive
 126 am__can_run_installinfo = \
 127   case $$AM_UPDATE_INFO_DIR in \
 128     n|no|NO) false;; \
 129     *) (install-info --version) >/dev/null 2>&1;; \
 130   esac
 131 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 132   distclean-recursive maintainer-clean-recursive
 133 am__recursive_targets = \
 134   $(RECURSIVE_TARGETS) \
 135   $(RECURSIVE_CLEAN_TARGETS) \
 136   $(am__extra_recursive_targets)
 137 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 138         distdir
 139 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 140 # Read a list of newline-separated strings from the standard input,
 141 # and print each of them once, without duplicates.  Input order is
 142 # *not* preserved.
 143 am__uniquify_input = $(AWK) '\
 144   BEGIN { nonempty = 0; } \
 145   { items[$$0] = 1; nonempty = 1; } \
 146   END { if (nonempty) { for (i in items) print i; }; } \
 147 '
 148 # Make sure the list of sources is unique.  This is necessary because,
 149 # e.g., the same source file might be shared among _SOURCES variables
 150 # for different programs/libraries.
 151 am__define_uniq_tagged_files = \
 152   list='$(am__tagged_files)'; \
 153   unique=`for i in $$list; do \
 154     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 155   done | $(am__uniquify_input)`
 156 ETAGS = etags
 157 CTAGS = ctags
 158 DIST_SUBDIRS = $(SUBDIRS)
 159 am__DIST_COMMON = $(srcdir)/Makefile.in
 160 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 161 am__relativize = \
 162   dir0=`pwd`; \
 163   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 164   sed_rest='s,^[^/]*/*,,'; \
 165   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 166   sed_butlast='s,/*[^/]*$$,,'; \
 167   while test -n "$$dir1"; do \
 168     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 169     if test "$$first" != "."; then \
 170       if test "$$first" = ".."; then \
 171         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 172         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 173       else \
 174         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 175         if test "$$first2" = "$$first"; then \
 176           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 177         else \
 178           dir2="../$$dir2"; \
 179         fi; \
 180         dir0="$$dir0"/"$$first"; \
 181       fi; \
 182     fi; \
 183     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 184   done; \
 185   reldir="$$dir2"
 186 ACLOCAL = @ACLOCAL@
 187 AMTAR = @AMTAR@
 188 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 189 AUTOCONF = @AUTOCONF@
 190 AUTOHEADER = @AUTOHEADER@
 191 AUTOMAKE = @AUTOMAKE@
 192 AWK = @AWK@
 193 CC = @CC@
 194 CCDEPMODE = @CCDEPMODE@
 195 CFLAGS = @CFLAGS@
 196 CPP = @CPP@
 197 CPPFLAGS = @CPPFLAGS@
 198 CTIE = @CTIE@
 199 CYGPATH_W = @CYGPATH_W@
 200 DEFS = @DEFS@
 201 DEPDIR = @DEPDIR@
 202 ECHO_C = @ECHO_C@
 203 ECHO_N = @ECHO_N@
 204 ECHO_T = @ECHO_T@
 205 EGREP = @EGREP@
 206 EXEEXT = @EXEEXT@
 207 FOP = @FOP@
 208 GREP = @GREP@
 209 INSTALL = @INSTALL@
 210 INSTALL_DATA = @INSTALL_DATA@
 211 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 212 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 213 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 214 LDFLAGS = @LDFLAGS@
 215 LIBOBJS = @LIBOBJS@
 216 LIBS = @LIBS@
 217 LTLIBOBJS = @LTLIBOBJS@
 218 LYNX = @LYNX@
 219 MAKEINFO = @MAKEINFO@
 220 MKDIR_P = @MKDIR_P@
 221 OBJEXT = @OBJEXT@
 222 PACKAGE = @PACKAGE@
 223 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 224 PACKAGE_NAME = @PACKAGE_NAME@
 225 PACKAGE_STRING = @PACKAGE_STRING@
 226 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 227 PACKAGE_URL = @PACKAGE_URL@
 228 PACKAGE_VERSION = @PACKAGE_VERSION@
 229 PATH_SEPARATOR = @PATH_SEPARATOR@
 230 PDF = @PDF@
 231 SET_MAKE = @SET_MAKE@
 232 SHELL = @SHELL@
 233 STRIP = @STRIP@
 234 SVNVER = @SVNVER@
 235 TAKAO = @TAKAO@
 236 TAKAOGEXFILE = @TAKAOGEXFILE@
 237 TAKAOGFILE = @TAKAOGFILE@
 238 TAKAOGFONTDIR = @TAKAOGFONTDIR@
 239 TAKAOMFILE = @TAKAOMFILE@
 240 TAKAOMFONTDIR = @TAKAOMFONTDIR@
 241 TIDY = @TIDY@
 242 TXT = @TXT@
 243 VERSION = @VERSION@
 244 XMLLINT = @XMLLINT@
 245 XSLTPROC = @XSLTPROC@
 246 abs_bookdir = @abs_bookdir@
 247 abs_builddir = @abs_builddir@
 248 abs_srcdir = @abs_srcdir@
 249 abs_top_builddir = @abs_top_builddir@
 250 abs_top_srcdir = @abs_top_srcdir@
 251 ac_ct_CC = @ac_ct_CC@
 252 am__include = @am__include@
 253 am__leading_dot = @am__leading_dot@
 254 am__quote = @am__quote@
 255 am__tar = @am__tar@
 256 am__untar = @am__untar@
 257 bindir = @bindir@
 258 bookdir = @bookdir@
 259 build_alias = @build_alias@
 260 builddir = @builddir@
 261 datadir = @datadir@
 262 datarootdir = @datarootdir@
 263 docdir = @docdir@
 264 dvidir = @dvidir@
 265 exec_prefix = @exec_prefix@
 266 host_alias = @host_alias@
 267 htmldir = @htmldir@
 268 includedir = @includedir@
 269 infodir = @infodir@
 270 install_sh = @install_sh@
 271 libdir = @libdir@
 272 libexecdir = @libexecdir@
 273 localedir = @localedir@
 274 localstatedir = @localstatedir@
 275 mandir = @mandir@
 276 mkdir_p = @mkdir_p@
 277 oldincludedir = @oldincludedir@
 278 pdfdir = @pdfdir@
 279 prefix = @prefix@
 280 program_transform_name = @program_transform_name@
 281 psdir = @psdir@
 282 sbindir = @sbindir@
 283 sharedstatedir = @sharedstatedir@
 284 srcdir = @srcdir@
 285 sysconfdir = @sysconfdir@
 286 target_alias = @target_alias@
 287 top_build_prefix = @top_build_prefix@
 288 top_builddir = @top_builddir@
 289 top_srcdir = @top_srcdir@
 290 SUBDIRS = common \
 291         sparc
 292
 293 BOOKdir = @abs_bookdir@/system-config
 294 CHANGE_FILES = \
 295         mips64-64-chapter.ch  \
 296         mips64-chapter.ch     \
 297         mips-chapter.ch       \
 298         ppc-chapter.ch        \
 299         ppc64-chapter.ch      \
 300         ppc64-64-chapter.ch   \
 301         sparc-chapter.ch      \
 302         sparc64-64-chapter.ch \
 303         sparc64-chapter.ch    \
 304         x86-chapter.ch        \
 305         x86_64-64-chapter.ch  \
 306         x86_64-chapter.ch
 307
 308 EXTRA_DIST = $(CHANGE_FILES)
 309 srcs = $(CHANGE_FILES:.ch=.xml)
 310 SUFFIXES = .ch .xml
 311 all: all-recursive
 312
 313 .SUFFIXES:
 314 .SUFFIXES: .ch .xml
 315 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 316         @for dep in $?; do \
 317           case '$(am__configure_deps)' in \
 318             *$$dep*) \
 319               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 320                 && { if test -f $@; then exit 0; else break; fi; }; \
 321               exit 1;; \
 322           esac; \
 323         done; \
 324         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/system-config/Makefile'; \
 325         $(am__cd) $(top_srcdir) && \
 326           $(AUTOMAKE) --gnu src/system-config/Makefile
 327 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 328         @case '$?' in \
 329           *config.status*) \
 330             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 331           *) \
 332             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 333             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 334         esac;
 335
 336 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 337         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 338
 339 $(top_srcdir)/configure:  $(am__configure_deps)
 340         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 341 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 342         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 343 $(am__aclocal_m4_deps):
 344
 345 # This directory's subdirectories are mostly independent; you can cd
 346 # into them and run 'make' without going through this Makefile.
 347 # To change the values of 'make' variables: instead of editing Makefiles,
 348 # (1) if the variable is set in 'config.status', edit 'config.status'
 349 #     (which will cause the Makefiles to be regenerated when you run 'make');
 350 # (2) otherwise, pass the desired values on the 'make' command line.
 351 $(am__recursive_targets):
 352         @fail=; \
 353         if $(am__make_keepgoing); then \
 354           failcom='fail=yes'; \
 355         else \
 356           failcom='exit 1'; \
 357         fi; \
 358         dot_seen=no; \
 359         target=`echo $@ | sed s/-recursive//`; \
 360         case "$@" in \
 361           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 362           *) list='$(SUBDIRS)' ;; \
 363         esac; \
 364         for subdir in $$list; do \
 365           echo "Making $$target in $$subdir"; \
 366           if test "$$subdir" = "."; then \
 367             dot_seen=yes; \
 368             local_target="$$target-am"; \
 369           else \
 370             local_target="$$target"; \
 371           fi; \
 372           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 373           || eval $$failcom; \
 374         done; \
 375         if test "$$dot_seen" = "no"; then \
 376           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 377         fi; test -z "$$fail"
 378
 379 ID: $(am__tagged_files)
 380         $(am__define_uniq_tagged_files); mkid -fID $$unique
 381 tags: tags-recursive
 382 TAGS: tags
 383
 384 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 385         set x; \
 386         here=`pwd`; \
 387         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 388           include_option=--etags-include; \
 389           empty_fix=.; \
 390         else \
 391           include_option=--include; \
 392           empty_fix=; \
 393         fi; \
 394         list='$(SUBDIRS)'; for subdir in $$list; do \
 395           if test "$$subdir" = .; then :; else \
 396             test ! -f $$subdir/TAGS || \
 397               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 398           fi; \
 399         done; \
 400         $(am__define_uniq_tagged_files); \
 401         shift; \
 402         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 403           test -n "$$unique" || unique=$$empty_fix; \
 404           if test $$# -gt 0; then \
 405             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 406               "$$@" $$unique; \
 407           else \
 408             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 409               $$unique; \
 410           fi; \
 411         fi
 412 ctags: ctags-recursive
 413
 414 CTAGS: ctags
 415 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 416         $(am__define_uniq_tagged_files); \
 417         test -z "$(CTAGS_ARGS)$$unique" \
 418           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 419              $$unique
 420
 421 GTAGS:
 422         here=`$(am__cd) $(top_builddir) && pwd` \
 423           && $(am__cd) $(top_srcdir) \
 424           && gtags -i $(GTAGS_ARGS) "$$here"
 425 cscopelist: cscopelist-recursive
 426
 427 cscopelist-am: $(am__tagged_files)
 428         list='$(am__tagged_files)'; \
 429         case "$(srcdir)" in \
 430           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 431           *) sdir=$(subdir)/$(srcdir) ;; \
 432         esac; \
 433         for i in $$list; do \
 434           if test -f "$$i"; then \
 435             echo "$(subdir)/$$i"; \
 436           else \
 437             echo "$$sdir/$$i"; \
 438           fi; \
 439         done >> $(top_builddir)/cscope.files
 440
 441 distclean-tags:
 442         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 443
 444 distdir: $(DISTFILES)
 445         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 446         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 447         list='$(DISTFILES)'; \
 448           dist_files=`for file in $$list; do echo $$file; done | \
 449           sed -e "s|^$$srcdirstrip/||;t" \
 450               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 451         case $$dist_files in \
 452           */*) $(MKDIR_P) `echo "$$dist_files" | \
 453                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 454                            sort -u` ;; \
 455         esac; \
 456         for file in $$dist_files; do \
 457           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 458           if test -d $$d/$$file; then \
 459             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 460             if test -d "$(distdir)/$$file"; then \
 461               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 462             fi; \
 463             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 464               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 465               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 466             fi; \
 467             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 468           else \
 469             test -f "$(distdir)/$$file" \
 470             || cp -p $$d/$$file "$(distdir)/$$file" \
 471             || exit 1; \
 472           fi; \
 473         done
 474         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 475           if test "$$subdir" = .; then :; else \
 476             $(am__make_dryrun) \
 477               || test -d "$(distdir)/$$subdir" \
 478               || $(MKDIR_P) "$(distdir)/$$subdir" \
 479               || exit 1; \
 480             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 481             $(am__relativize); \
 482             new_distdir=$$reldir; \
 483             dir1=$$subdir; dir2="$(top_distdir)"; \
 484             $(am__relativize); \
 485             new_top_distdir=$$reldir; \
 486             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 487             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 488             ($(am__cd) $$subdir && \
 489               $(MAKE) $(AM_MAKEFLAGS) \
 490                 top_distdir="$$new_top_distdir" \
 491                 distdir="$$new_distdir" \
 492                 am__remove_distdir=: \
 493                 am__skip_length_check=: \
 494                 am__skip_mode_fix=: \
 495                 distdir) \
 496               || exit 1; \
 497           fi; \
 498         done
 499 check-am: all-am
 500 check: check-recursive
 501 all-am: Makefile
 502 installdirs: installdirs-recursive
 503 installdirs-am:
 504 install: install-recursive
 505 install-exec: install-exec-recursive
 506 install-data: install-data-recursive
 507 uninstall: uninstall-recursive
 508
 509 install-am: all-am
 510         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 511
 512 installcheck: installcheck-recursive
 513 install-strip:
 514         if test -z '$(STRIP)'; then \
 515           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 516             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 517               install; \
 518         else \
 519           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 520             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 521             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 522         fi
 523 mostlyclean-generic:
 524
 525 clean-generic:
 526
 527 distclean-generic:
 528         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 529         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 530
 531 maintainer-clean-generic:
 532         @echo "This command is intended for maintainers to use"
 533         @echo "it deletes files that may require special tools to rebuild."
 534 clean: clean-recursive
 535
 536 clean-am: clean-generic mostlyclean-am
 537
 538 distclean: distclean-recursive
 539         -rm -f Makefile
 540 distclean-am: clean-am distclean-generic distclean-tags
 541
 542 dvi: dvi-recursive
 543
 544 dvi-am:
 545
 546 html: html-recursive
 547
 548 html-am:
 549
 550 info: info-recursive
 551
 552 info-am:
 553
 554 install-data-am:
 555
 556 install-dvi: install-dvi-recursive
 557
 558 install-dvi-am:
 559
 560 install-exec-am:
 561
 562 install-html: install-html-recursive
 563
 564 install-html-am:
 565
 566 install-info: install-info-recursive
 567
 568 install-info-am:
 569
 570 install-man:
 571
 572 install-pdf: install-pdf-recursive
 573
 574 install-pdf-am:
 575
 576 install-ps: install-ps-recursive
 577
 578 install-ps-am:
 579
 580 installcheck-am:
 581
 582 maintainer-clean: maintainer-clean-recursive
 583         -rm -f Makefile
 584 maintainer-clean-am: distclean-am maintainer-clean-generic
 585
 586 mostlyclean: mostlyclean-recursive
 587
 588 mostlyclean-am: mostlyclean-generic
 589
 590 pdf: pdf-recursive
 591
 592 pdf-am:
 593
 594 ps: ps-recursive
 595
 596 ps-am:
 597
 598 uninstall-am:
 599
 600 .MAKE: $(am__recursive_targets) install-am install-strip
 601
 602 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
 603         check-am clean clean-generic cscopelist-am ctags ctags-am \
 604         distclean distclean-generic distclean-tags distdir dvi dvi-am \
 605         html html-am info info-am install install-am install-data \
 606         install-data-am install-dvi install-dvi-am install-exec \
 607         install-exec-am install-html install-html-am install-info \
 608         install-info-am install-man install-pdf install-pdf-am \
 609         install-ps install-ps-am install-strip installcheck \
 610         installcheck-am installdirs installdirs-am maintainer-clean \
 611         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 612         pdf-am ps ps-am tags tags-am uninstall uninstall-am
 613
 614 .PRECIOUS: Makefile
 615
 616 .ch.xml:
 617         $(top_builddir)/$(CTIE) -m $@ $(BOOKdir)/$@ $(srcdir)/$*.ch >/dev/null
 618
 619 all: ctie $(srcs)
 620
 621 ctie:
 622         @$(MAKE) -C $(top_builddir)/$@ $@ >/dev/null
 623
 624 $(srcs): $(BOOKdir)/$@ $(srcdir)/$(@:.xml=.ch)
 625
 626 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 627 # Otherwise a system limit (for SysV at least) may be exceeded.
 628 .NOEXPORT: