1 # Makefile.in generated by automake 1.15 from Makefile.am.
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 if test -z '$(MAKELEVEL)'; then \
20 elif test -n '$(MAKE_HOST)'; then \
22 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
28 am__make_running_with_option = \
29 case $${target_option-} in \
31 *) echo "am__make_running_with_option: internal error: invalid" \
32 "target option '$${target_option-}' specified" >&2; \
36 sane_makeflags=$$MAKEFLAGS; \
37 if $(am__is_gnu_make); then \
38 sane_makeflags=$$MFLAGS; \
43 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
50 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52 for flg in $$sane_makeflags; do \
53 test $$skip_next = yes && { skip_next=no; continue; }; \
56 -*I) strip_trailopt 'I'; skip_next=yes;; \
57 -*I?*) strip_trailopt 'I';; \
58 -*O) strip_trailopt 'O'; skip_next=yes;; \
59 -*O?*) strip_trailopt 'O';; \
60 -*l) strip_trailopt 'l'; skip_next=yes;; \
61 -*l?*) strip_trailopt 'l';; \
62 -[dEDm]) skip_next=yes;; \
63 -[JT]) skip_next=yes;; \
66 *$$target_option*) has_opt=yes; break;; \
70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72 pkgdatadir = $(datadir)/@PACKAGE@
73 pkgincludedir = $(includedir)/@PACKAGE@
74 pkglibdir = $(libdir)/@PACKAGE@
75 pkglibexecdir = $(libexecdir)/@PACKAGE@
76 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
77 install_sh_DATA = $(install_sh) -c -m 644
78 install_sh_PROGRAM = $(install_sh) -c
79 install_sh_SCRIPT = $(install_sh) -c
80 INSTALL_HEADER = $(INSTALL_DATA)
81 transform = $(program_transform_name)
89 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
90 am__aclocal_m4_deps = $(top_srcdir)/version.ac \
91 $(top_srcdir)/m4/progs.m4 \
92 $(top_srcdir)/m4/ax_compare_version.m4 \
93 $(top_srcdir)/m4/ac_check_docbook_xslt.m4 \
94 $(top_srcdir)/m4/ac_check_docbook_dtd.m4 \
95 $(top_srcdir)/m4/ac_check_takaofontdir.m4 \
96 $(top_srcdir)/configure.ac
97 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
99 DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
100 mkinstalldirs = $(install_sh) -d
101 CONFIG_HEADER = $(top_builddir)/config.h
103 CONFIG_CLEAN_VPATH_FILES =
104 AM_V_P = $(am__v_P_@AM_V@)
105 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
108 AM_V_GEN = $(am__v_GEN_@AM_V@)
109 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
110 am__v_GEN_0 = @echo " GEN " $@;
112 AM_V_at = $(am__v_at_@AM_V@)
113 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
118 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
119 ctags-recursive dvi-recursive html-recursive info-recursive \
120 install-data-recursive install-dvi-recursive \
121 install-exec-recursive install-html-recursive \
122 install-info-recursive install-pdf-recursive \
123 install-ps-recursive install-recursive installcheck-recursive \
124 installdirs-recursive pdf-recursive ps-recursive \
125 tags-recursive uninstall-recursive
126 am__can_run_installinfo = \
127 case $$AM_UPDATE_INFO_DIR in \
129 *) (install-info --version) >/dev/null 2>&1;; \
131 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
132 distclean-recursive maintainer-clean-recursive
133 am__recursive_targets = \
134 $(RECURSIVE_TARGETS) \
135 $(RECURSIVE_CLEAN_TARGETS) \
136 $(am__extra_recursive_targets)
137 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
139 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
140 # Read a list of newline-separated strings from the standard input,
141 # and print each of them once, without duplicates. Input order is
143 am__uniquify_input = $(AWK) '\
144 BEGIN { nonempty = 0; } \
145 { items[$$0] = 1; nonempty = 1; } \
146 END { if (nonempty) { for (i in items) print i; }; } \
148 # Make sure the list of sources is unique. This is necessary because,
149 # e.g., the same source file might be shared among _SOURCES variables
150 # for different programs/libraries.
151 am__define_uniq_tagged_files = \
152 list='$(am__tagged_files)'; \
153 unique=`for i in $$list; do \
154 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
155 done | $(am__uniquify_input)`
158 DIST_SUBDIRS = $(SUBDIRS)
159 am__DIST_COMMON = $(srcdir)/Makefile.in
160 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
163 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
164 sed_rest='s,^[^/]*/*,,'; \
165 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
166 sed_butlast='s,/*[^/]*$$,,'; \
167 while test -n "$$dir1"; do \
168 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
169 if test "$$first" != "."; then \
170 if test "$$first" = ".."; then \
171 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
172 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
174 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
175 if test "$$first2" = "$$first"; then \
176 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
180 dir0="$$dir0"/"$$first"; \
183 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
188 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
189 AUTOCONF = @AUTOCONF@
190 AUTOHEADER = @AUTOHEADER@
191 AUTOMAKE = @AUTOMAKE@
194 CCDEPMODE = @CCDEPMODE@
197 CPPFLAGS = @CPPFLAGS@
199 CYGPATH_W = @CYGPATH_W@
210 INSTALL_DATA = @INSTALL_DATA@
211 INSTALL_PROGRAM = @INSTALL_PROGRAM@
212 INSTALL_SCRIPT = @INSTALL_SCRIPT@
213 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
217 LTLIBOBJS = @LTLIBOBJS@
219 MAKEINFO = @MAKEINFO@
223 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
224 PACKAGE_NAME = @PACKAGE_NAME@
225 PACKAGE_STRING = @PACKAGE_STRING@
226 PACKAGE_TARNAME = @PACKAGE_TARNAME@
227 PACKAGE_URL = @PACKAGE_URL@
228 PACKAGE_VERSION = @PACKAGE_VERSION@
229 PATH_SEPARATOR = @PATH_SEPARATOR@
231 SET_MAKE = @SET_MAKE@
236 TAKAOGEXFILE = @TAKAOGEXFILE@
237 TAKAOGFILE = @TAKAOGFILE@
238 TAKAOGFONTDIR = @TAKAOGFONTDIR@
239 TAKAOMFILE = @TAKAOMFILE@
240 TAKAOMFONTDIR = @TAKAOMFONTDIR@
245 XSLTPROC = @XSLTPROC@
246 abs_bookdir = @abs_bookdir@
247 abs_builddir = @abs_builddir@
248 abs_srcdir = @abs_srcdir@
249 abs_top_builddir = @abs_top_builddir@
250 abs_top_srcdir = @abs_top_srcdir@
251 ac_ct_CC = @ac_ct_CC@
252 am__include = @am__include@
253 am__leading_dot = @am__leading_dot@
254 am__quote = @am__quote@
256 am__untar = @am__untar@
259 build_alias = @build_alias@
260 builddir = @builddir@
262 datarootdir = @datarootdir@
265 exec_prefix = @exec_prefix@
266 host_alias = @host_alias@
268 includedir = @includedir@
270 install_sh = @install_sh@
272 libexecdir = @libexecdir@
273 localedir = @localedir@
274 localstatedir = @localstatedir@
277 oldincludedir = @oldincludedir@
280 program_transform_name = @program_transform_name@
283 sharedstatedir = @sharedstatedir@
285 sysconfdir = @sysconfdir@
286 target_alias = @target_alias@
287 top_build_prefix = @top_build_prefix@
288 top_builddir = @top_builddir@
289 top_srcdir = @top_srcdir@
294 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
296 case '$(am__configure_deps)' in \
298 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
299 && { if test -f $@; then exit 0; else break; fi; }; \
303 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/schema/Makefile'; \
304 $(am__cd) $(top_srcdir) && \
305 $(AUTOMAKE) --gnu src/schema/Makefile
306 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
309 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
311 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
312 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
315 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
316 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
318 $(top_srcdir)/configure: $(am__configure_deps)
319 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
320 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
321 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
322 $(am__aclocal_m4_deps):
324 # This directory's subdirectories are mostly independent; you can cd
325 # into them and run 'make' without going through this Makefile.
326 # To change the values of 'make' variables: instead of editing Makefiles,
327 # (1) if the variable is set in 'config.status', edit 'config.status'
328 # (which will cause the Makefiles to be regenerated when you run 'make');
329 # (2) otherwise, pass the desired values on the 'make' command line.
330 $(am__recursive_targets):
332 if $(am__make_keepgoing); then \
333 failcom='fail=yes'; \
338 target=`echo $@ | sed s/-recursive//`; \
340 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
341 *) list='$(SUBDIRS)' ;; \
343 for subdir in $$list; do \
344 echo "Making $$target in $$subdir"; \
345 if test "$$subdir" = "."; then \
347 local_target="$$target-am"; \
349 local_target="$$target"; \
351 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
354 if test "$$dot_seen" = "no"; then \
355 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
358 ID: $(am__tagged_files)
359 $(am__define_uniq_tagged_files); mkid -fID $$unique
363 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
366 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
367 include_option=--etags-include; \
370 include_option=--include; \
373 list='$(SUBDIRS)'; for subdir in $$list; do \
374 if test "$$subdir" = .; then :; else \
375 test ! -f $$subdir/TAGS || \
376 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
379 $(am__define_uniq_tagged_files); \
381 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
382 test -n "$$unique" || unique=$$empty_fix; \
383 if test $$# -gt 0; then \
384 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
387 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
391 ctags: ctags-recursive
394 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
395 $(am__define_uniq_tagged_files); \
396 test -z "$(CTAGS_ARGS)$$unique" \
397 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
401 here=`$(am__cd) $(top_builddir) && pwd` \
402 && $(am__cd) $(top_srcdir) \
403 && gtags -i $(GTAGS_ARGS) "$$here"
404 cscopelist: cscopelist-recursive
406 cscopelist-am: $(am__tagged_files)
407 list='$(am__tagged_files)'; \
408 case "$(srcdir)" in \
409 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
410 *) sdir=$(subdir)/$(srcdir) ;; \
412 for i in $$list; do \
413 if test -f "$$i"; then \
414 echo "$(subdir)/$$i"; \
418 done >> $(top_builddir)/cscope.files
421 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
423 distdir: $(DISTFILES)
424 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
425 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
426 list='$(DISTFILES)'; \
427 dist_files=`for file in $$list; do echo $$file; done | \
428 sed -e "s|^$$srcdirstrip/||;t" \
429 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
430 case $$dist_files in \
431 */*) $(MKDIR_P) `echo "$$dist_files" | \
432 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
435 for file in $$dist_files; do \
436 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
437 if test -d $$d/$$file; then \
438 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
439 if test -d "$(distdir)/$$file"; then \
440 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
442 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
443 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
444 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
446 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
448 test -f "$(distdir)/$$file" \
449 || cp -p $$d/$$file "$(distdir)/$$file" \
453 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
454 if test "$$subdir" = .; then :; else \
456 || test -d "$(distdir)/$$subdir" \
457 || $(MKDIR_P) "$(distdir)/$$subdir" \
459 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
461 new_distdir=$$reldir; \
462 dir1=$$subdir; dir2="$(top_distdir)"; \
464 new_top_distdir=$$reldir; \
465 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
466 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
467 ($(am__cd) $$subdir && \
468 $(MAKE) $(AM_MAKEFLAGS) \
469 top_distdir="$$new_top_distdir" \
470 distdir="$$new_distdir" \
471 am__remove_distdir=: \
472 am__skip_length_check=: \
473 am__skip_mode_fix=: \
479 check: check-recursive
481 installdirs: installdirs-recursive
483 install: install-recursive
484 install-exec: install-exec-recursive
485 install-data: install-data-recursive
486 uninstall: uninstall-recursive
489 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
491 installcheck: installcheck-recursive
493 if test -z '$(STRIP)'; then \
494 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
495 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
498 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
499 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
500 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
507 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
508 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
510 maintainer-clean-generic:
511 @echo "This command is intended for maintainers to use"
512 @echo "it deletes files that may require special tools to rebuild."
513 clean: clean-recursive
515 clean-am: clean-generic mostlyclean-am
517 distclean: distclean-recursive
519 distclean-am: clean-am distclean-generic distclean-tags
535 install-dvi: install-dvi-recursive
541 install-html: install-html-recursive
545 install-info: install-info-recursive
551 install-pdf: install-pdf-recursive
555 install-ps: install-ps-recursive
561 maintainer-clean: maintainer-clean-recursive
563 maintainer-clean-am: distclean-am maintainer-clean-generic
565 mostlyclean: mostlyclean-recursive
567 mostlyclean-am: mostlyclean-generic
579 .MAKE: $(am__recursive_targets) install-am install-strip
581 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
582 check-am clean clean-generic cscopelist-am ctags ctags-am \
583 distclean distclean-generic distclean-tags distdir dvi dvi-am \
584 html html-am info info-am install install-am install-data \
585 install-data-am install-dvi install-dvi-am install-exec \
586 install-exec-am install-html install-html-am install-info \
587 install-info-am install-man install-pdf install-pdf-am \
588 install-ps install-ps-am install-strip installcheck \
589 installcheck-am installdirs installdirs-am maintainer-clean \
590 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
591 pdf-am ps ps-am tags tags-am uninstall uninstall-am
596 # Tell versions [3.59,3.63) of GNU make to not export all variables.
597 # Otherwise a system limit (for SysV at least) may be exceeded.