1 2011-03-05 Mike Frysinger <vapier@gentoo.org>
3 * MAINTAINERS: Add bfin entry.
4 * configure.tgt (bfin-*-*): Handle bfin targets.
5 * configure: Regenerate.
7 2011-01-05 Mike Frysinger <vapier@gentoo.org>
9 * .gitignore: Add /*/hw-config.h.
11 2010-12-23 Mike Frysinger <vapier@gentoo.org>
13 * .gitignore: New file.
15 2010-07-28 DJ Delorie <dj@redhat.com>
17 * MAINTAINERS: Add self as RX maintainer. Sort list.
19 2010-06-08 Nick Clifton <nickc@redhat.com>
21 * reg.c (set_oszc): Use unsigned int for the mask.
22 (set_szc, set_osz, set_sz): Likewise.
24 2010-04-26 Mike Frysinger <vapier@gentoo.org>
26 * configure.ac: Target logic moved out to and included from ...
27 * configure.tgt: ... this new file.
28 * configure: Regenerated.
30 2010-04-12 Mike Frysinger <vapier@gentoo.org>
32 * README-HACKING: Add more sections.
34 2010-02-11 Doug Evans <dje@sebabeach.org>
36 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
37 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
38 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
39 * cris/semcrisv32f-switch.c: Regenerate.
41 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
43 * avr/configure: Regenerate.
44 * cris/configure: Regenerate.
45 * microblaze/configure: Regenerate.
47 2010-01-02 Doug Evans <dje@sebabeach.org>
49 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
50 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
51 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
52 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
53 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
54 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
56 2010-01-01 Doug Evans <dje@sebabeach.org>
58 * cris/mloop.in: Fix copyright year update snafu.
60 2009-11-24 Joel Brobecker <brobecker@adacore.com>
62 * common/aclocal.m4: Add include of ../../config/zlib.m4.
63 * common/common.m4: Use AM_ZLIB to check for zlib support.
64 * ppc/configure.ac: Likewise.
65 * arm/configure, avr/configure, common/configure, cr16/configure,
66 cris/configure, d10v/configure, erc32/configure, frv/configure,
67 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
68 m32r/configure, m68hc11/configure, mcore/configure,
69 microblaze/configure, mips/configure, mn10300/configure,
70 moxie/configure, ppc/configure, sh/configure, sh64/configure,
71 v850/configure: Regenerate.
73 2009-11-24 DJ Delorie <dj@redhat.com>
76 * configure.ac: Add entry for Renesas RX.
77 * configure: Regenerate.
79 2009-11-22 Doug Evans <dje@sebabeach.org>
81 * cris/cpuall.h: Regenerate.
82 * cris/cpuv10.h: Regenerate.
83 * cris/cpuv32.h: Regenerate.
84 * cris/decodev10.c: Regenerate.
85 * cris/decodev10.h: Regenerate.
86 * cris/decodev32.c: Regenerate.
87 * cris/decodev32.h: Regenerate.
89 2009-11-12 Tristan Gingold <gingold@adacore.com>
91 * avr/interp.c (sim_write): Allow byte access.
94 2009-11-12 Tristan Gingold <gingold@adacore.com>
96 * avr/interp.c (sim_load): Clear memory before loading.
98 2009-11-09 Tristan Gingold <gingold@adacore.com>
100 * avr/interp.c (sim_resume): Fix typo for OP_ret.
102 2009-10-23 Doug Evans <dje@sebabeach.org>
104 * cris/arch.c: Regenerate.
105 * cris/arch.h: Regenerate.
106 * cris/cpuall.h: Regenerate.
107 * cris/cpuv10.c: Regenerate.
108 * cris/cpuv10.h: Regenerate.
109 * cris/cpuv32.c: Regenerate.
110 * cris/cpuv32.h: Regenerate.
111 * cris/cris-desc.c: Regenerate.
112 * cris/cris-desc.h: Regenerate.
113 * cris/cris-opc.h: Regenerate.
114 * cris/decodev10.c: Regenerate.
115 * cris/decodev10.h: Regenerate.
116 * cris/decodev32.c: Regenerate.
117 * cris/decodev32.h: Regenerate.
118 * cris/modelv10.c: Regenerate.
119 * cris/modelv32.c: Regenerate.
120 * cris/semcrisv10f-switch.c: Regenerate.
121 * cris/semcrisv32f-switch.c: Regenerate.
123 2009-10-22 Tristan Gingold <gingold@adacore.com>
125 * avr/interp.c (sim_stop): Return 1.
127 2009-10-16 Doug Evans <dje@sebabeach.org>
129 * MAINTAINERS: Add myself as m32r maintainer.
131 2009-10-15 Michael Egaer <eager@eagercon.com>
133 * MAINTAINERS: Add self as MicroBlaze maintainer.
135 2009-10-14 Ben Elliston <bje@gnu.org>
137 * MAINTAINERS (common): Move myself to "past maintainers" section.
139 2009-10-06 Michael Eager <eager@eagercon.com>
141 * microblaze/interp.c: Add include microblaze-dis.h.
143 2009-09-23 Michael Eager <eager@eagercon.com>
145 * configure: Add microblaze-*.* (not regenerated).
146 * configure.ac: Likewise.
147 * microblaze/config.in: New.
148 * microblaze/configure: Generate.
149 * microblaze/configure.ac: New.
150 * microblaze/interp.c: New.
151 * microblaze/Makefile.in: New.
152 * microblaze/microblaze.h: New.
153 * microblaze/microblaze.isa: New.
154 * microblaze/sim-main.h: New.
155 * microblaze/sysdep.h: New.
157 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
159 * avr/config.in: Regenerate.
160 * avr/configure: Likewise.
161 * configure: Likewise.
162 * cris/config.in: Likewise.
163 * cris/configure: Likewise.
165 * configure.ac: m4_include toplevel config/override.m4.
166 * configure: Regenerate.
167 * avr/configure: Regenerate.
168 * cris/configure: Regenerate.
170 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
172 * Makefile.in (datarootdir): New variable.
174 2009-05-18 Jon Beniston <jon@beniston.com>
176 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
177 * configure.ac: Add lm32 target.
178 * lm32: New directory.
180 2009-05-11 Andrew Cagney <cagney@gnu.org>
182 * MAINTAINERS: Orphan ppc.
184 2009-05-08 Kevin Buettner <kevinb@redhat.com>
186 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
187 m32c_signal_to_target. Change signal return values from SIGILL,
188 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
189 TARGET_SIGNAL_SEGV, etc. Fix all callers.
191 2009-04-30 Anthony Green <green@moxielogic.com>
193 * MAINTAINERS: Add myself for the moxie port.
194 * moxie: New directory.
195 * configure.ac: Add entry for moxie.
196 * configure: Regenerate.
198 2009-04-27 Tristan Gingold <gingold@adacore.com>
200 * avr: New directory.
201 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
202 * avr/config.in: New file, generated by autoheader.
203 * avr/configure: New file generated by autoconf.
204 * configure.ac: Add avr.
205 * configure: Regenerated.
207 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
209 * Makefile.in: Add dummy install-pdf, html, and
210 install-html targets.
212 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
214 * cris/sim-if.c: Include errno.h.
215 (cris_start_address, cris_program_offset): New variables.
216 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
218 (cris_options): New options --cris-program-offset and
219 --cris-start-address.
220 (cris_option_handler): Handle new options.
221 (cris_program_offset_write, cris_set_section_offset_iterator)
222 (cris_offset_sections, cris_offset_sections): New functions.
223 (sim_load): Use cris_program_offset_write as function argument to
224 cris_load_elf_file, not sim_write.
225 (struct offsetinfo): New struct.
226 (cris_handle_interpreter): Fix typo in comment.
227 (sim_open): Call cris_offset_sections as soon as the bfd of the
228 infile is available. Gate bfd validity checks on abfd non-NULL.
229 (sim_create_inferior): Let cris_start_address when != -1 override
230 other start-address choices.
232 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
234 * cris/traps.c (abort): Define to call sim_io_error.
235 (create_map): Make -1 imply a non-fixed address, not 0. All
236 callers changed. Only prefer the next higher unmapped address if
237 the last mapped address is no less than 0x40000000. Check that
238 the address to be mapped is not already mapped. Update head
240 (unmap_pages): Don't call abort when recursive call fails, just
241 note and return an error if a page in the range couldn't be unmapped.
242 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
243 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
244 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
245 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
246 don't abort on page not being mapped. Handle non-anon filemap
247 with length padded to pagesize.
249 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
251 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
252 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
253 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
254 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
255 (TARGET_AT_CLKTCK): Remove redundant macros.
256 (AUX_ENT): Adjust to use standard ELF AT_* macros.
257 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
259 (sim_open): Also pass AT_SECURE.
261 * cris/sim-main.h (struct _sim_cpu): New member
262 set_target_thread_data.
263 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
264 * cris/crisv10f.c: Ditto.
265 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
266 (MY (f_specific_init)): Set new _sim_cpu member to new function.
267 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
268 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
271 * cris/traps.c (TARGET_SYS_exit_group): Define.
272 (cris_break_13_handler): Handle it like the exit for the last
275 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
276 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
277 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
278 2.6.27. Set machine field to the BFD printable name of the
281 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
282 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
283 TARGET_MAP_DENYWRITE.
285 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
286 (TARGET_X_OK, TARGET_F_OK): Define.
287 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
289 * cris/semcrisv32f-switch.c: Regenerate.
291 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
293 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
294 just a short CRIS-specific notice. Tweak the wording for a
295 failing architecture test.
297 * cris/traps.c (TARGET_SYS_writev): New macro.
298 (is_mapped_only, cris_dump_map): New functions.
299 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
300 and prot combinations and a non-zero page-offset. If
301 TARGET_MAP_FIXED, unmap pages before mapping them.
302 <case TARGET_SYS_mprotect>: When checking, allow any length
303 argument. Don't actually do anything.
304 <case TARGET_SYS_writev>: New case.
306 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
307 * cris/sim-if.c: Include elf-bfd.h.
308 (struct progbounds): New members end_loadmem, start_nonloadmem.
309 (xprintf, eprintf): New functions, copied from common/sim-load.c.
310 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
311 (get_progbounds_iterator): Renamed from get_progbounds. Make
312 static. Update head comment. Set new struct progbounds members.
313 (exec_load_addr, interp_load_addr, interp_start_addr): New static
315 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
316 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
318 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
319 handling to use auxv_entries. Improve error message and checking
320 for invalid programs. Use new variable abfd for the program
321 instead of for each access reaching into sd to get it.
322 (sim_create_inferior): If non-zero, use interp_start_addr instead
323 of the program start address.
324 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
325 stale comment. Always specify little-endian.
327 2008-07-29 Nick Clifton <nickc@redhat.com>
329 * common/genmloop.sh: Add new parameter: -shell to specify the
330 command interpreter to use to run the input file. This is
331 necessary because otherwise SHELL is taken from the user's
332 environment, and not from the makefile that invoked this script
333 and the user might not be running an sh-like shell.
334 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
335 * fr30/Makefile.in: Likewise.
336 * frv/Makefile.in: Likewise.
337 * i960/Makefile.in: Likewise.
338 * iq2000/Makefile.in: Likewise.
339 * m32r/Makefile.in: Likewise.
341 * frv/mloop.in: Add missing start of line comment marker.
343 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
345 * cris/configure: Regenerate to track ../common/common.m4 changes.
346 * cris/config.in: Ditto.
348 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
349 Daniel Jacobowitz <dan@codesourcery.com>
350 Joseph Myers <joseph@codesourcery.com>
352 * cris/configure: Regenerate.
354 2008-05-09 Olivier Hainque <hainque@adacore.com>
356 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
358 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
360 * MAINTAINERS: Add myself as maintainer of cr16 port.
362 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
364 Add simulator for National cr16 processor.
365 * cr16: New directory.
366 * configure.ac: Add entry for National cr16.
367 * configure: Regenerate.
369 2008-02-05 DJ Delorie <dj@redhat.com>
371 * configure.ac (v850): V850 now has a testsuite.
372 * configure (v850): Likewise.
374 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
376 Updated copyright notices for most files.
378 2007-12-19 DJ Delorie <dj@redhat.com>
380 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
383 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
385 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
386 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
387 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
388 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
389 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
390 cris/semcrisv32f-switch.c: Regenerate.
392 2007-08-24 Joel Brobecker <brobecker@adacore.com>
394 Switch the license of all files explicitly copyright the FSF
397 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
399 * Makefile.in: Add dummy "pdf" target.
401 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
403 * cris/traps.c (dump_statistics): Change format for cycle numbers
404 to %llu and cast parameters to unsigned long long.
406 2007-02-16 Thiemo Seufer <ths@mips.com>
408 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
410 2007-01-28 Manuel Lauss <slauss@resi.at>
412 * configure.ac (sh64-*-*): Change to sh64*-*-*.
413 (sh-*-*): Change to sh*-*-*.
414 * configure: Regenerated.
416 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
418 Updated copyright notices for most files.
420 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
422 * Makefile.in (autoconf-common autoheader-common): Only run
423 autoheader on subdirs with a file config.in.
425 * configure.ac (common): Make the default "yes" for all targets
427 * configure: Regenerate.
429 * Makefile.in (autoconf-common autoheader-common): In documented
430 usage, say SHELL=/bin/sh.
431 (.PHONY): Add autoheader-common.
433 * MAINTAINERS: Add self as authorized committer for *.
435 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
436 Hans-Peter Nilsson <hp@axis.com>
438 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
439 (cris_unknown_syscall_action): Declare.
440 * cris/sim-if.c (cris_unknown_syscall_action): Define.
441 (cris_options): Add cris-unknown-syscall option.
442 (cris_option_handler): Correct comment about and error message for
443 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
444 * cris/traps.c: Include stdarg.h
445 (cris_unknown_syscall): New function.
446 (cris_break_13_handler): Instead of sim_io_eprintf and
447 sim_engine_halt, call cris_unknown_syscall to handle more or less
448 unknown syscalls. Adjust code as necessary to handle return
451 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
453 * MAINTAINERS: Add Dave Brolley for sh64.
455 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
457 * cris/traps.c (TARGET_PIPE_BUF): New macro.
458 (cris_pipe_empty): Correct initialization of "remaining". Only
459 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
462 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
464 * cris/configure.ac: Check for limits.h and sys/param.h.
465 * cris/configure, cris/config.in: Rebuild.
466 * cris/traps.c (SIM_PATHMAX): New macro.
467 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
469 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
471 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
472 * Makefile.in (FLAGS_TO_PASS): Include libdir.
473 * configure: Regenerated.
475 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
477 * cris/configure: Regenerated.
479 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
481 * cris/configure: Regenerated.
483 2006-05-05 Andreas Schwab <schwab@suse.de>
485 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
486 * configure: Regenerate.
488 * Makefile.in (CFLAGS_FOR_BUILD): Define.
489 (CC_FOR_BUILD): Don't override.
490 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
492 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
494 * MAINTAINERS: Add an "Authorized committers" section, and list
497 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
499 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
501 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
503 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
504 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
505 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
506 (all): Depend on rvdummy$(EXEEXT).
507 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
508 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
510 * cris/configure: Regenerate.
511 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
512 (enum cris_interrupt_type, crisv10deliver_interrupt)
513 (crisv32deliver_interrupt: New declarations.
514 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
515 sim_events_tickn and set state-events member work_pending when it's
516 time for the next event.
517 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
518 interrupt-delivery function.
519 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
520 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
521 * cris/devices.c: Include hw-device.h.
522 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
523 (device_io_write_buffer): Only perform 0x900000xx-functions if
524 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
525 call hw_io_write_buffer. Add return 0 last in function.
526 * cris/sim-if.c (cris_have_900000xxif): Now global.
527 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
528 Force "-model" option, effectively.
529 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
530 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
532 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
534 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
535 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
536 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
538 2006-03-13 DJ Delorie <dj@redhat.com>
540 * MAINTAINERS: Add self as m32c sim maintainer.
542 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
544 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
546 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
548 2006-01-23 Jim Blandy <jimb@redhat.com>
550 Add simulator for Renesas M32C and M16C.
552 * m32c: New directory.
553 * configure.ac: Add entry for Renesas M32C.
554 * configure: Regenerate.
556 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
558 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
559 cycle count for the current insn.
561 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
563 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
564 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
565 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
566 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
568 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
570 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
571 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
572 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
573 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
574 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
575 cris/semcrisv32f-switch.c: Regenerate.
577 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
579 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
580 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
582 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
583 F_GETFL on fd 0, 1 and 2.
585 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
587 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
588 last_open_fd, last_open_flags.
589 * cris/traps.c: Don't include targ-vals.h.
590 (TARGET_O_ACCMODE): Define.
591 (cris_break_13_handler): Set new _sim_cpu members.
592 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
593 Rearrange code as switch. Emit "unimplemented" abort for
594 unimplemented fcntl calls.
596 * cris/traps.c (TARGET_SYS_stat): Define.
597 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
598 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
600 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
602 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
603 low 32 bits are used after an unsigned long cast.
605 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
607 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
609 2005-05-26 Chris Demetriou <cgd@netbsd.org>
611 * MAINTAINERS: Update my mail address, move myself to the
612 "Past maintainers" section.
614 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
616 * configure.ac: Add igen to v850 build.
617 * configure: Regenerate.
619 2005-04-29 Paul Brook <paul@codesourcery.com>
621 * common/callback.c (PIPE_BUF): Provide default definition.
622 (os_lstat): Use stat if lstat is not available on the host.
623 (os_ftruncate): Return EINVAL if not available on the host.
624 (os_truncate): Ditto.
625 * common/configure.ac: Check for lstat, truncate and ftruncate.
626 * common/configure: Regenerate.
627 * common/config.in: Regenerate.
629 2005-04-27 Paul Brook <paul@codesourcery.com>
631 * common/Make-common.in: Add $(EXEEXT) to "run".
633 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
635 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
636 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
637 implemented. In call to create_map, pad length argument to 8k.
639 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
641 * configure.ac: Add explicit sh64 case.
642 * configure: Regenerate.
644 2005-03-30 Paul Brook <paul@codesourcery.com>
646 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
648 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
650 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
651 include cgen-ops.h in decodev10.c and decodev32.c.
652 * cris/sim-main.h: Don't include cgen-ops.h here.
653 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
654 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
655 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
656 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
657 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
658 cris/semcrisv32f-switch.c: Regenerate.
660 * cris/traps.c (cris_break_13_handler) <case
661 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
662 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
664 2005-03-23 Mark Kettenis <kettenis@gnu.org>
666 * cris/configure: Regenerate.
668 2005-02-28 Jim Blandy <jimb@redhat.com>
670 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
671 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
672 Regenerated, after change to common/aclocal.m4.
674 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
676 * iq2000: New target subdirectory.
677 * configure.ac: Add iq2000 target.
678 * configure: Regenerate.
680 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
682 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
683 (realclean, install): Fail if subdir make failed.
685 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
687 * cris: New directory, simulator for Axis Communications CRIS
688 including CRIS v32, CGEN-based.
689 * configure.ac: Add corresponding configury.
690 * configure: Regenerate.
692 2005-01-17 Andrew Cagney <cagney@gnu.org>
694 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
695 common directory. Remove sparc*-*-* from list.
697 2005-01-11 Andrew Cagney <cagney@gnu.org>
699 * Makefile.in (autoconf-common autoheader-common): Add --force to
700 autoconf and autoheader.
701 (autoconf-common autoheader-common)
702 (autoconf-install autoheader-install): Check for configure.ac, not
704 * configure.ac: Delete AC_CONFIG_AUX_DIR.
705 * configure: Re-generate.
707 2005-01-07 Andrew Cagney <cagney@gnu.org>
709 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
710 correctly calls AC_CONFIG_SUBDIRS.
711 * configure: Re-generate.
713 2004-12-01 Andrew Cagney <cagney@gnu.org>
715 * i960, h8500: Delete directory.
717 2004-11-12 Andrew Cagney <cagney@gnu.org>
719 * d30v, fr30, mn10200, z8k: Delete directory.
721 2004-03-10 Ben Elliston <bje@gnu.org>
723 * MAINTAINERS: Update my mail address.
725 2004-01-26 Chris Demetriou <cgd@broadcom.com>
727 * configure.in (mips*-*-*): Configure in testsuite.
728 * configure: Regenerate.
730 2003-10-08 Dave Brolley <brolley@redhat.com>
732 * configure.in: Move frv handling to alphabetically correct placement.
734 2003-09-03 Andreas Schwab <schwab@suse.de>
736 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
738 2003-08-29 Dave Brolley <brolley@redhat.com>
740 * MAINTAINERS: Add myself as maintainer of the FRV port.
742 2003-08-20 Michael Snyder <msnyder@redhat.com>
743 Dave Brolley <brolley@redhat.com>
745 * frv/: New directory, simulator for the Fujitsu FRV.
746 * configure.in: Add frv configury.
747 * configure: Regenerate.
749 2003-08-10 Ben Elliston <bje@wasabisystems.com>
751 * MAINTAINERS: Update my mail address.
753 2003-08-09 Andrew Cagney <cagney@redhat.com>
755 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
756 maintenance. List igen and sh maintainers. Mention that target
757 and global maintainers pick up the slack.
759 2003-07-09 Michael Snyder <msnyder@redhat.com>
761 * configure.in: Add testsuite to extra_subdirs for sh.
762 * configure: Regenerate.
764 2003-01-23 Nick Clifton <nickc@redhat.com>
768 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
770 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
772 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
774 * MAINTAINERS: Update my email address.
776 2002-07-17 Andrew Cagney <ac131313@redhat.com>
778 * w65/: Delete directory.
780 2002-07-16 Andrew Cagney <ac131313@redhat.com>
782 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
783 * configure: Re-generate.
785 2002-07-13 Andrew Cagney <ac131313@redhat.com>
787 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
788 * configure: Re-generate.
790 2002-06-16 Andrew Cagney <ac131313@redhat.com>
792 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
793 id, date and host to be overriden by NAME, ID, DATE and HOST
794 respectfully. Use ISO dates.
796 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
798 * Makefile.in (ChangeLog): New makefile variable.
799 * README-HACKING: Mention the ChangeLog makefile variable.
801 2002-06-01 Andrew Cagney <ac131313@redhat.com>
803 * tic80/: Delete directory.
805 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
807 * MAINTAINERS: Update my email address.
809 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
811 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
813 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
815 * MAINTAINERS: Record self as a co-maintainer of just common/.
817 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
819 * MAINTAINERS: Point to GDB files describing overall maintaince
820 and check-in procedures.
822 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
824 * MAINTAINERS: Add myself for ARM portions.
826 2001-10-19 Andrew Cagney <ac131313@redhat.com>
828 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
829 * configure: Re-generate.
831 2001-02-16 Ben Elliston <bje@redhat.com>
833 * MAINTAINERS: Add myself for common portions.
835 2001-01-15 Chris Demetriou <cgd@broadcom.com>
837 * MAINTAINERS: Added self and Andrew for the mips sim.
839 2000-10-25 Geoff Keating <geoffk@cygnus.com>
841 * MAINTAINERS: Added self and Andrew for the ppc sim.
843 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
845 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
846 * m68hc11: New directory.
848 * configure: Regenerate.
850 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
852 * tic80: New directory.
853 * configure.in: Add configury.
854 * configure: Regenerate.
856 2000-04-20 Nick Clifton <nickc@cygnus.com>
858 * configure.in (extra_subdirs): Add testsuite to strongarm
860 * configure: Regenerate.
862 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
864 * MAINTAINERS: New file. Blank.
866 1999-11-18 Ben Elliston <bje@cygnus.com>
868 * configure.in: Require autoconf 2.13 and remove obsolete
869 invocation of AC_C_CROSS.
870 * configure: Regenerate.
872 1999-09-29 Doug Evans <devans@casey.cygnus.com>
874 * configure.in: Configure the testsuite directory for thumb.
875 * configure: Regenerate.
877 1999-07-16 Ben Elliston <bje@cygnus.com>
879 * configure.in: Configure the testsuite directory for arm.
880 * configure: Regenerate.
882 1999-04-08 Nick Clifton <nickc@cygnus.com>
884 * configure.in: Add support for MCore target.
885 * configure: Regenerate.
887 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
889 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
890 RUNTEST instead of commenting out, fixes portability problem.
892 1999-02-08 Nick Clifton <nickc@cygnus.com>
894 * configure.in: Add support for StrongARM target.
895 * configure: Regenerate.
897 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
899 * configure.in: Require autoconf 2.12.1 or higher.
901 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
903 * configure.in (i960-*-*): Add.
904 * configure: Rebuild.
906 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
908 * configure.in: Added case for fr30-*-*.
909 * configure: Regenerated.
911 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
913 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
914 to allow successful operation on Windows.
916 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
918 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
919 check can be invoked recursively.
921 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
923 * configure.in: Build simulator on sparclite and sparc86x targets.
924 * configure: Regenerate.
926 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
928 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
929 to autoconf and autoheader.
931 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
933 * Makefile.in (autoconf-common autoheader-common): Pass `-l
934 ../common' to autoconf and autoheader. Unconditionally run
935 autoconf in every subdir.
936 (autoconf-changelog autoheader-changelog): Unconditionally run
937 commands in every subdir.
938 (autoconf-install autoheader-install): Likewise.
940 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
942 * Makefile.in: Get SHELL from configure.
943 * (FLAGS_TO_PASS): Pass down SHELL.
944 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
947 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
949 * configure.in (extra_subdirs): Enable igen for mn10300.
950 * configure: Re-generate.
952 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
954 * configure.in (extra_subdirs): Add support for thumb target.
956 * configure (extra_subdirs): Add support for thumb target.
958 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
960 * configure.in (extra_subdirs): Add IGEN directory when MIPS
962 * configure: Regenerate.
964 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
966 * configure.in (extra_subdirs): v850ea needs igen.
967 * configure: Re-generate.
969 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
971 * configure.in (testdir): When a testsuite directory, add that to
972 the list of confdirs.
974 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
976 * configure.in (extra_subdirs): Enable igen ready for V850.
978 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
980 * configure.in (w65-*-*, only_if_enabled): Set.
981 * configure: Re-generate.
983 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
985 * configure.in (sparc*-*-*, only_if_enabled): Set
986 only_if_enabled=yes. Check only_if_enabled before enabling a
988 * configure: Regenerate.
990 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
992 * configure.in (extra_subdirs): Add v850e target.
994 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
996 * configure.in (extra_subdirs): Add v850ea target.
998 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1000 * configure.in (sparc*-*-*): Don't build erc32.
1001 * configure: Regenerate.
1003 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1005 * configure.in (m32r-*-*): New target.
1006 * configure: Regenerate.
1008 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1010 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1012 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1013 thought that .NOEXPORT was the default target.
1015 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1017 * Makefile.in (clean mostlyclean): Restore targets accidentally
1018 deleted in earlier change.
1020 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1022 * Makefile.in (autoheader-common, autoheader-changelog,
1023 autoheader-install): Perform autoheader in addition to autoconf.
1025 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1027 * Makefile.in (autoconf-install): New target.
1028 (autoconf-changelog): Try different way to obtain user name.
1030 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1032 * Makefile.in (autoconf-changelog): New target, update
1033 ChangeLog for all subdirectories - normally used after
1034 autoconf-common target.
1036 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1038 * configure.in (extra_subdirs): Include testsuite for d30v.
1039 * configure: Regenerate.
1041 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1043 (check): New rules - drive the testsuite.
1045 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1047 * configure.in: Add mn10200 configure lines accidentally
1049 * configure: Regenerated.
1051 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1053 * configure.in (extra_subdirs): Generalize common sub directory
1055 (extra_subdirs): For d30v add igen to the list to be built.
1057 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1059 * configure.in (d30v): New target.
1060 * configure: Regenerated.
1062 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1064 * configure.in: Don't require GCC to build the mn10200
1066 * configure: Rebuilt.
1068 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1070 * configure.in: Don't configure any subdirs if no simulator
1071 is being built. Don't use erc32 for sparc64.
1072 * configure: Regenerated.
1074 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1076 * Makefile.in (autoconf-common): New target.
1077 * configure.in: Do configure common.
1078 * configure: Regenerated.
1080 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1082 * configure configure.in: Don't configure common anymore. Files
1083 from common are now built in the individual simualtor directories.
1084 This fixes problems with the WinGDB build procedure.
1086 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1088 * configure: Enable the mn10200 simulator.
1090 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1092 * configure.in (configdirs): Add common.
1093 * configure: Regenerated.
1095 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1097 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1098 system V based targets.
1099 * configure: Regenerate.
1101 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1103 * configure.in (--enable-sim-powerpc): Delete.
1104 (--enable-sim): Add.
1105 * configure: Regenerated.
1107 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1109 * configure.in: Only build the V850 simulator if
1111 * configure: Rebuild.
1113 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1115 * configure.in: Do build erc32 for DOS and Windows hosts.
1116 * configure: Rebuild.
1118 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1120 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1121 be inherited from the parent. Remove INSTALL_XFORM and
1122 INSTALL_XFORM1. Make INSTALL be set from configure.
1124 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1126 * configure.in: Only build the MIPS simulator if we are using
1128 * configure: Rebuild.
1130 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1132 * configure.in (v850-*-*): Added V850 simulator.
1134 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1136 * configure.in (d10v-*-*): Added D10V simulator.
1138 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1140 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1141 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1143 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1144 (AC_PROG_INSTALL): Added.
1145 * configure: Rebuilt.
1147 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1149 * configure.in: Only configure erc32 if using gcc.
1150 * configure: Rebuild.
1152 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1154 * configure.in (sim_target): Build PowerPC simulator for powerpc
1155 System V.4, Solaris, and Elf targets.
1156 * configure: Regenerate with autoconf 2.10.
1158 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1160 * configure.in: Only built erc32 simulator on Unix hosts as it
1162 * configure: Regenerated with autoconf 2.8.
1164 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1166 * erc32: Sparc simulator from the ESA.
1168 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1170 From: Miles Bader <miles@gnu.ai.mit.edu>
1171 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1172 * configure: Regenerate using autoconf.
1174 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1176 * Makefile.in (install): Fix typo.
1178 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1180 * configure: Regenerate with autoconf 2.7.
1182 * Makefile.in (all): Simplify.
1183 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1184 as in the all target.
1185 (distclean, maintainer-clean, realclean): Likewise.
1186 (install): Likewise.
1188 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1190 * Makefile.in (all): Remove extra '\' char from shell script.
1192 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1194 * Makefile.in (all): Avoid a for loop with zero elements, even if
1195 the loop will not be executed because of an if statement.
1197 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1199 * Makefile.in (install): Add missing semicolon in "fi \".
1201 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1203 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1204 defaults from configure.
1206 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1208 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1209 if either --enable-sim-powerpc is used, or the host compiler is
1212 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1214 * configure.in (mips*-*-*): Added "mips" simulator target.
1215 * configure: Re-generated.
1217 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1219 * Makefile.in (BISON): Remove macro.
1220 (FLAGS_TO_PASS): Remove BISON.
1222 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1224 * configure.in: Explicitly `exit 0' for broken shells.
1225 * configure: Rebuilt.
1227 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1229 * common/run.c (main): Initialize the callbacks.
1231 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1233 * Makefile.in (maintainer-clean): New synonym for realclean.
1235 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1237 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1238 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1240 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1242 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1243 <cagney@highland.com.au>.
1244 * configure: Regnerate from configure.in.
1246 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1248 * Update all FSF addresses except those in COPYING* files.
1250 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1252 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1253 submakes either default or passed in value.
1255 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1257 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1258 install): Changed targets so that they descend all
1259 subdirectories in $(SUBDIRS).
1260 (*-all, *-clean, *-install): Removed targets.
1262 * configure.in: Don't bother with target makefile fragments, they
1263 are no longer needed.
1264 * configure: regenerated.
1266 * Makefile.in, configure.in: converted to autoconf.
1267 * configure: New file, generated with autconf 2.4.
1269 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1271 * Makefile.in: Support ARM.
1272 * configure.in: Ditto.
1274 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1276 * Makefile.in: Support W65.
1277 * configure.in: Ditto.
1279 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1281 * Makefile.in: Add TAGS target.
1283 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1285 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1286 install-h8300, clean-h8300, all-h8500, install-h8500,
1287 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1290 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1292 * Makefile.in: remove endian.h trace from h8500
1294 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1296 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1298 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1300 * Makefile.in: make all of the all-* target (except all-nothing)
1301 depend on endian.h, so that if we're not building a simulator, we
1304 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1306 * Makefile.in (check, installcheck): Added dummy targets.
1308 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1310 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1311 explicitly make it, since some makes apparently don't work with
1312 VPATH and .c to executable rules (SunOS make for example).
1314 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1316 * Makefile.in (endian): Add explicit rule for broken makes.
1318 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1320 * Makefile.in (info, install-info): New targets.
1321 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1324 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1326 * Makefile.in (endian.h): build endian.h via a temporary file so
1327 that we don't leave an incomplete file lying around on
1329 (clean): remove endian, e.h, and endian.h.
1331 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1333 * Makefile.in, configure.in: if target isn't supported, build a