libstdc++-v3/Makefile.in

   1 # Makefile.in generated by automake 1.9.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16 srcdir = @srcdir@
  17 top_srcdir = @top_srcdir@
  18 VPATH = @srcdir@
  19 pkgdatadir = $(datadir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkgincludedir = $(includedir)/@PACKAGE@
  22 top_builddir = .
  23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  24 INSTALL = @INSTALL@
  25 install_sh_DATA = $(install_sh) -c -m 644
  26 install_sh_PROGRAM = $(install_sh) -c
  27 install_sh_SCRIPT = $(install_sh) -c
  28 INSTALL_HEADER = $(INSTALL_DATA)
  29 transform = $(program_transform_name)
  30 NORMAL_INSTALL = :
  31 PRE_INSTALL = :
  32 POST_INSTALL = :
  33 NORMAL_UNINSTALL = :
  34 PRE_UNINSTALL = :
  35 POST_UNINSTALL = :
  36 build_triplet = @build@
  37 host_triplet = @host@
  38 target_triplet = @target@
  39 DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
  40         $(srcdir)/../config.sub $(srcdir)/../install-sh \
  41         $(srcdir)/../ltmain.sh $(srcdir)/../missing \
  42         $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \
  43         $(srcdir)/Makefile.in $(srcdir)/config.h.in \
  44         $(top_srcdir)/configure $(top_srcdir)/fragment.am \
  45         $(top_srcdir)/scripts/testsuite_flags.in ChangeLog
  46 subdir = .
  47 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  48 am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
  49         $(top_srcdir)/../config/iconv.m4 \
  50         $(top_srcdir)/../config/lead-dot.m4 \
  51         $(top_srcdir)/../config/lib-ld.m4 \
  52         $(top_srcdir)/../config/lib-link.m4 \
  53         $(top_srcdir)/../config/lib-prefix.m4 \
  54         $(top_srcdir)/../config/multi.m4 \
  55         $(top_srcdir)/../config/no-executables.m4 \
  56         $(top_srcdir)/../config/unwind_ipinfo.m4 \
  57         $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
  58         $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
  59         $(top_srcdir)/crossconfig.m4 $(top_srcdir)/linkage.m4 \
  60         $(top_srcdir)/acinclude.m4 $(top_srcdir)/../config/tls.m4 \
  61         $(top_srcdir)/configure.ac
  62 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  63         $(ACLOCAL_M4)
  64 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  65  configure.lineno configure.status.lineno
  66 CONFIG_HEADER = config.h
  67 CONFIG_CLEAN_FILES = scripts/testsuite_flags
  68 depcomp =
  69 am__depfiles_maybe =
  70 SOURCES =
  71 DIST_SOURCES =
  72 MULTISRCTOP =
  73 MULTIBUILDTOP =
  74 MULTIDIRS =
  75 MULTISUBDIR =
  76 MULTIDO = true
  77 MULTICLEAN = true
  78 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  79         html-recursive info-recursive install-data-recursive \
  80         install-exec-recursive install-info-recursive \
  81         install-recursive installcheck-recursive installdirs-recursive \
  82         pdf-recursive ps-recursive uninstall-info-recursive \
  83         uninstall-recursive
  84 ETAGS = etags
  85 CTAGS = ctags
  86 DIST_SUBDIRS = include libsupc++ libmath src po testsuite
  87 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  88 distdir = $(PACKAGE)-$(VERSION)
  89 top_distdir = $(distdir)
  90 am__remove_distdir = \
  91   { test ! -d $(distdir) \
  92     || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
  93          && rm -fr $(distdir); }; }
  94 DIST_ARCHIVES = $(distdir).tar.gz
  95 GZIP_ENV = --best
  96 distuninstallcheck_listfiles = find . -type f -print
  97 distcleancheck_listfiles = find . -type f -print
  98 ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
  99 ACLOCAL = @ACLOCAL@
 100 ALLOCATOR_H = @ALLOCATOR_H@
 101 ALLOCATOR_NAME = @ALLOCATOR_NAME@
 102 AMTAR = @AMTAR@
 103 AR = @AR@
 104 AS = @AS@
 105 ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
 106 ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
 107 AUTOCONF = @AUTOCONF@
 108 AUTOHEADER = @AUTOHEADER@
 109 AUTOMAKE = @AUTOMAKE@
 110 AWK = @AWK@
 111 BASIC_FILE_CC = @BASIC_FILE_CC@
 112 BASIC_FILE_H = @BASIC_FILE_H@
 113 CC = @CC@
 114 CCODECVT_CC = @CCODECVT_CC@
 115 CCOLLATE_CC = @CCOLLATE_CC@
 116 CCTYPE_CC = @CCTYPE_CC@
 117 CFLAGS = @CFLAGS@
 118 CLOCALE_CC = @CLOCALE_CC@
 119 CLOCALE_H = @CLOCALE_H@
 120 CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
 121 CMESSAGES_CC = @CMESSAGES_CC@
 122 CMESSAGES_H = @CMESSAGES_H@
 123 CMONEY_CC = @CMONEY_CC@
 124 CNUMERIC_CC = @CNUMERIC_CC@
 125 CPP = @CPP@
 126 CPPFLAGS = @CPPFLAGS@
 127 CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
 128 CSTDIO_H = @CSTDIO_H@
 129 CTIME_CC = @CTIME_CC@
 130 CTIME_H = @CTIME_H@
 131 CXX = @CXX@
 132 CXXCPP = @CXXCPP@
 133 CXXFLAGS = @CXXFLAGS@
 134 CYGPATH_W = @CYGPATH_W@
 135 C_INCLUDE_DIR = @C_INCLUDE_DIR@
 136 DEBUG_FLAGS = @DEBUG_FLAGS@
 137 DEFS = @DEFS@
 138 DUMPBIN = @DUMPBIN@
 139 ECHO_C = @ECHO_C@
 140 ECHO_N = @ECHO_N@
 141 ECHO_T = @ECHO_T@
 142 EGREP = @EGREP@
 143 ENABLE_SYMVERS_DARWIN_FALSE = @ENABLE_SYMVERS_DARWIN_FALSE@
 144 ENABLE_SYMVERS_DARWIN_TRUE = @ENABLE_SYMVERS_DARWIN_TRUE@
 145 ENABLE_SYMVERS_FALSE = @ENABLE_SYMVERS_FALSE@
 146 ENABLE_SYMVERS_GNU_FALSE = @ENABLE_SYMVERS_GNU_FALSE@
 147 ENABLE_SYMVERS_GNU_NAMESPACE_FALSE = @ENABLE_SYMVERS_GNU_NAMESPACE_FALSE@
 148 ENABLE_SYMVERS_GNU_NAMESPACE_TRUE = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@
 149 ENABLE_SYMVERS_GNU_TRUE = @ENABLE_SYMVERS_GNU_TRUE@
 150 ENABLE_SYMVERS_TRUE = @ENABLE_SYMVERS_TRUE@
 151 ENABLE_VISIBILITY_FALSE = @ENABLE_VISIBILITY_FALSE@
 152 ENABLE_VISIBILITY_TRUE = @ENABLE_VISIBILITY_TRUE@
 153 EXEEXT = @EXEEXT@
 154 EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
 155 FGREP = @FGREP@
 156 GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@
 157 GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@
 158 GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@
 159 GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@
 160 GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@
 161 GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@
 162 GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@
 163 GLIBCXX_C_HEADERS_C_GLOBAL_FALSE = @GLIBCXX_C_HEADERS_C_GLOBAL_FALSE@
 164 GLIBCXX_C_HEADERS_C_GLOBAL_TRUE = @GLIBCXX_C_HEADERS_C_GLOBAL_TRUE@
 165 GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@
 166 GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@
 167 GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@
 168 GLIBCXX_C_HEADERS_EXTRA_FALSE = @GLIBCXX_C_HEADERS_EXTRA_FALSE@
 169 GLIBCXX_C_HEADERS_EXTRA_TRUE = @GLIBCXX_C_HEADERS_EXTRA_TRUE@
 170 GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@
 171 GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@
 172 GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
 173 GLIBCXX_LDBL_COMPAT_FALSE = @GLIBCXX_LDBL_COMPAT_FALSE@
 174 GLIBCXX_LDBL_COMPAT_TRUE = @GLIBCXX_LDBL_COMPAT_TRUE@
 175 GREP = @GREP@
 176 INSTALL_DATA = @INSTALL_DATA@
 177 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 178 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 179 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 180 LD = @LD@
 181 LDFLAGS = @LDFLAGS@
 182 LIBICONV = @LIBICONV@
 183 LIBMATHOBJS = @LIBMATHOBJS@
 184 LIBOBJS = @LIBOBJS@
 185 LIBS = @LIBS@
 186 LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
 187 LIBTOOL = @LIBTOOL@
 188 LN_S = @LN_S@
 189 LTLIBICONV = @LTLIBICONV@
 190 LTLIBOBJS = @LTLIBOBJS@
 191 MAINT = @MAINT@
 192 MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
 193 MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 194 MAKEINFO = @MAKEINFO@
 195 NM = @NM@
 196 OBJEXT = @OBJEXT@
 197 OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
 198 OPT_LDFLAGS = @OPT_LDFLAGS@
 199 OS_INC_SRCDIR = @OS_INC_SRCDIR@
 200 PACKAGE = @PACKAGE@
 201 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 202 PACKAGE_NAME = @PACKAGE_NAME@
 203 PACKAGE_STRING = @PACKAGE_STRING@
 204 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 205 PACKAGE_VERSION = @PACKAGE_VERSION@
 206 PATH_SEPARATOR = @PATH_SEPARATOR@
 207 RANLIB = @RANLIB@
 208 SECTION_FLAGS = @SECTION_FLAGS@
 209 SECTION_LDFLAGS = @SECTION_LDFLAGS@
 210 SED = @SED@
 211 SET_MAKE = @SET_MAKE@
 212 SHELL = @SHELL@
 213 STRIP = @STRIP@
 214 SYMVER_FILE = @SYMVER_FILE@
 215 TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
 216 USE_NLS = @USE_NLS@
 217 VERSION = @VERSION@
 218 WARN_FLAGS = @WARN_FLAGS@
 219 WERROR = @WERROR@
 220 ac_ct_AR = @ac_ct_AR@
 221 ac_ct_AS = @ac_ct_AS@
 222 ac_ct_CC = @ac_ct_CC@
 223 ac_ct_CXX = @ac_ct_CXX@
 224 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 225 ac_ct_RANLIB = @ac_ct_RANLIB@
 226 ac_ct_STRIP = @ac_ct_STRIP@
 227 am__leading_dot = @am__leading_dot@
 228 am__tar = @am__tar@
 229 am__untar = @am__untar@
 230 baseline_dir = @baseline_dir@
 231 bindir = @bindir@
 232 build = @build@
 233 build_alias = @build_alias@
 234 build_cpu = @build_cpu@
 235 build_os = @build_os@
 236 build_vendor = @build_vendor@
 237 check_msgfmt = @check_msgfmt@
 238 datadir = @datadir@
 239 enable_shared = @enable_shared@
 240 enable_static = @enable_static@
 241 exec_prefix = @exec_prefix@
 242 glibcxx_MOFILES = @glibcxx_MOFILES@
 243 glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
 244 glibcxx_POFILES = @glibcxx_POFILES@
 245 glibcxx_builddir = @glibcxx_builddir@
 246 glibcxx_localedir = @glibcxx_localedir@
 247 glibcxx_prefixdir = @glibcxx_prefixdir@
 248 glibcxx_srcdir = @glibcxx_srcdir@
 249 glibcxx_thread_h = @glibcxx_thread_h@
 250 glibcxx_toolexecdir = @glibcxx_toolexecdir@
 251 glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
 252 gxx_include_dir = @gxx_include_dir@
 253 host = @host@
 254 host_alias = @host_alias@
 255 host_cpu = @host_cpu@
 256 host_os = @host_os@
 257 host_vendor = @host_vendor@
 258 includedir = @includedir@
 259 infodir = @infodir@
 260 install_sh = @install_sh@
 261 libdir = @libdir@
 262 libexecdir = @libexecdir@
 263 libtool_VERSION = @libtool_VERSION@
 264 localstatedir = @localstatedir@
 265 lt_ECHO = @lt_ECHO@
 266 mandir = @mandir@
 267 mkdir_p = @mkdir_p@
 268 multi_basedir = @multi_basedir@
 269 oldincludedir = @oldincludedir@
 270 port_specific_symbol_files = @port_specific_symbol_files@
 271 prefix = @prefix@
 272 program_transform_name = @program_transform_name@
 273 sbindir = @sbindir@
 274 sharedstatedir = @sharedstatedir@
 275 sysconfdir = @sysconfdir@
 276 target = @target@
 277 target_alias = @target_alias@
 278 target_cpu = @target_cpu@
 279 target_os = @target_os@
 280 target_vendor = @target_vendor@
 281 toplevel_srcdir = @toplevel_srcdir@
 282
 283 # May be used by various substitution variables.
 284 gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
 285 MAINT_CHARSET = latin1
 286 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
 287 PWD_COMMAND = $${PWDCMD-pwd}
 288 STAMP = echo timestamp >
 289 toolexecdir = $(glibcxx_toolexecdir)
 290 toolexeclibdir = $(glibcxx_toolexeclibdir)
 291
 292 # These bits are all figured out from configure.  Look in acinclude.m4
 293 # or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
 294 CONFIG_CXXFLAGS = \
 295         $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
 296
 297 WARN_CXXFLAGS = \
 298         $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
 299
 300
 301 # -I/-D flags to pass when compiling.
 302 AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
 303 @GLIBCXX_HOSTED_TRUE@hosted_source = libmath src po testsuite
 304 SUBDIRS = include libsupc++ $(hosted_source)
 305 ACLOCAL_AMFLAGS = -I . -I .. -I ../config
 306
 307 # Multilib support.
 308 MAKEOVERRIDES =
 309
 310 # Work around what appears to be a GNU make bug handling MAKEFLAGS
 311 # values defined in terms of make variables, as is the case for CC and
 312 # friends when we are called from the top level Makefile.
 313 AM_MAKEFLAGS = \
 314         "AR_FLAGS=$(AR_FLAGS)" \
 315         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 316         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 317         "CFLAGS=$(CFLAGS)" \
 318         "CXXFLAGS=$(CXXFLAGS)" \
 319         "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
 320         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 321         "INSTALL=$(INSTALL)" \
 322         "INSTALL_DATA=$(INSTALL_DATA)" \
 323         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 324         "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 325         "LDFLAGS=$(LDFLAGS)" \
 326         "LIBCFLAGS=$(LIBCFLAGS)" \
 327         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 328         "MAKE=$(MAKE)" \
 329         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 330         "PICFLAG=$(PICFLAG)" \
 331         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 332         "SHELL=$(SHELL)" \
 333         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 334         "exec_prefix=$(exec_prefix)" \
 335         "infodir=$(infodir)" \
 336         "libdir=$(libdir)" \
 337         "includedir=$(includedir)" \
 338         "prefix=$(prefix)" \
 339         "tooldir=$(tooldir)" \
 340         "gxx_include_dir=$(gxx_include_dir)" \
 341         "AR=$(AR)" \
 342         "AS=$(AS)" \
 343         "LD=$(LD)" \
 344         "RANLIB=$(RANLIB)" \
 345         "NM=$(NM)" \
 346         "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
 347         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 348         "DESTDIR=$(DESTDIR)" \
 349         "WERROR=$(WERROR)"
 350
 351
 352 # Subdir rules rely on $(FLAGS_TO_PASS)
 353 FLAGS_TO_PASS = $(AM_MAKEFLAGS)
 354 all: config.h
 355         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 356
 357 .SUFFIXES:
 358 am--refresh:
 359         @:
 360 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
 361         @for dep in $?; do \
 362           case '$(am__configure_deps)' in \
 363             *$$dep*) \
 364               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign  --ignore-deps'; \
 365               cd $(srcdir) && $(AUTOMAKE) --foreign  --ignore-deps \
 366                 && exit 0; \
 367               exit 1;; \
 368           esac; \
 369         done; \
 370         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  --ignore-deps Makefile'; \
 371         cd $(top_srcdir) && \
 372           $(AUTOMAKE) --foreign  --ignore-deps Makefile
 373 .PRECIOUS: Makefile
 374 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 375         @case '$?' in \
 376           *config.status*) \
 377             echo ' $(SHELL) ./config.status'; \
 378             $(SHELL) ./config.status;; \
 379           *) \
 380             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 381             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 382         esac;
 383
 384 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 385         $(SHELL) ./config.status --recheck
 386
 387 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 388         cd $(srcdir) && $(AUTOCONF)
 389 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 390         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 391
 392 config.h: stamp-h1
 393         @if test ! -f $@; then \
 394           rm -f stamp-h1; \
 395           $(MAKE) stamp-h1; \
 396         else :; fi
 397
 398 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 399         @rm -f stamp-h1
 400         cd $(top_builddir) && $(SHELL) ./config.status config.h
 401 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 402         cd $(top_srcdir) && $(AUTOHEADER)
 403         rm -f stamp-h1
 404         touch $@
 405
 406 distclean-hdr:
 407         -rm -f config.h stamp-h1
 408 scripts/testsuite_flags: $(top_builddir)/config.status $(top_srcdir)/scripts/testsuite_flags.in
 409         cd $(top_builddir) && $(SHELL) ./config.status $@
 410
 411 mostlyclean-libtool:
 412         -rm -f *.lo
 413
 414 clean-libtool:
 415         -rm -rf .libs _libs
 416
 417 distclean-libtool:
 418         -rm -f libtool
 419
 420 # GNU Make needs to see an explicit $(MAKE) variable in the command it
 421 # runs to enable its job server during parallel builds.  Hence the
 422 # comments below.
 423 all-multi:
 424         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 425 install-multi:
 426         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 427
 428 mostlyclean-multi:
 429         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 430 clean-multi:
 431         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 432 distclean-multi:
 433         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 434 maintainer-clean-multi:
 435         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 436 uninstall-info-am:
 437
 438 # This directory's subdirectories are mostly independent; you can cd
 439 # into them and run `make' without going through this Makefile.
 440 # To change the values of `make' variables: instead of editing Makefiles,
 441 # (1) if the variable is set in `config.status', edit `config.status'
 442 #     (which will cause the Makefiles to be regenerated when you run `make');
 443 # (2) otherwise, pass the desired values on the `make' command line.
 444 $(RECURSIVE_TARGETS):
 445         @failcom='exit 1'; \
 446         for f in x $$MAKEFLAGS; do \
 447           case $$f in \
 448             *=* | --[!k]*);; \
 449             *k*) failcom='fail=yes';; \
 450           esac; \
 451         done; \
 452         dot_seen=no; \
 453         target=`echo $@ | sed s/-recursive//`; \
 454         list='$(SUBDIRS)'; for subdir in $$list; do \
 455           echo "Making $$target in $$subdir"; \
 456           if test "$$subdir" = "."; then \
 457             dot_seen=yes; \
 458             local_target="$$target-am"; \
 459           else \
 460             local_target="$$target"; \
 461           fi; \
 462           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 463           || eval $$failcom; \
 464         done; \
 465         if test "$$dot_seen" = "no"; then \
 466           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 467         fi; test -z "$$fail"
 468
 469 mostlyclean-recursive clean-recursive distclean-recursive \
 470 maintainer-clean-recursive:
 471         @failcom='exit 1'; \
 472         for f in x $$MAKEFLAGS; do \
 473           case $$f in \
 474             *=* | --[!k]*);; \
 475             *k*) failcom='fail=yes';; \
 476           esac; \
 477         done; \
 478         dot_seen=no; \
 479         case "$@" in \
 480           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 481           *) list='$(SUBDIRS)' ;; \
 482         esac; \
 483         rev=''; for subdir in $$list; do \
 484           if test "$$subdir" = "."; then :; else \
 485             rev="$$subdir $$rev"; \
 486           fi; \
 487         done; \
 488         rev="$$rev ."; \
 489         target=`echo $@ | sed s/-recursive//`; \
 490         for subdir in $$rev; do \
 491           echo "Making $$target in $$subdir"; \
 492           if test "$$subdir" = "."; then \
 493             local_target="$$target-am"; \
 494           else \
 495             local_target="$$target"; \
 496           fi; \
 497           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 498           || eval $$failcom; \
 499         done && test -z "$$fail"
 500 tags-recursive:
 501         list='$(SUBDIRS)'; for subdir in $$list; do \
 502           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 503         done
 504 ctags-recursive:
 505         list='$(SUBDIRS)'; for subdir in $$list; do \
 506           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 507         done
 508
 509 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 510         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 511         unique=`for i in $$list; do \
 512             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 513           done | \
 514           $(AWK) '    { files[$$0] = 1; } \
 515                END { for (i in files) print i; }'`; \
 516         mkid -fID $$unique
 517 tags: TAGS
 518 ctags: CTAGS
 519 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 520                 $(TAGS_FILES) $(LISP)
 521         tags=; \
 522         here=`pwd`; \
 523         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 524         unique=`for i in $$list; do \
 525             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 526           done | \
 527           $(AWK) '    { files[$$0] = 1; } \
 528                END { for (i in files) print i; }'`; \
 529         test -z "$(CTAGS_ARGS)$$tags$$unique" \
 530           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 531              $$tags $$unique
 532
 533 GTAGS:
 534         here=`$(am__cd) $(top_builddir) && pwd` \
 535           && cd $(top_srcdir) \
 536           && gtags -i $(GTAGS_ARGS) $$here
 537
 538 distclean-tags:
 539         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 540
 541 distdir: $(DISTFILES)
 542         $(am__remove_distdir)
 543         mkdir $(distdir)
 544         $(mkdir_p) $(distdir)/.. $(distdir)/../config $(distdir)/scripts
 545         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 546         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
 547         list='$(DISTFILES)'; for file in $$list; do \
 548           case $$file in \
 549             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 550             $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
 551           esac; \
 552           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 553           dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
 554           if test "$$dir" != "$$file" && test "$$dir" != "."; then \
 555             dir="/$$dir"; \
 556             $(mkdir_p) "$(distdir)$$dir"; \
 557           else \
 558             dir=''; \
 559           fi; \
 560           if test -d $$d/$$file; then \
 561             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 562               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 563             fi; \
 564             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 565           else \
 566             test -f $(distdir)/$$file \
 567             || cp -p $$d/$$file $(distdir)/$$file \
 568             || exit 1; \
 569           fi; \
 570         done
 571         list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 572           if test "$$subdir" = .; then :; else \
 573             test -d "$(distdir)/$$subdir" \
 574             || $(mkdir_p) "$(distdir)/$$subdir" \
 575             || exit 1; \
 576             distdir=`$(am__cd) $(distdir) && pwd`; \
 577             top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 578             (cd $$subdir && \
 579               $(MAKE) $(AM_MAKEFLAGS) \
 580                 top_distdir="$$top_distdir" \
 581                 distdir="$$distdir/$$subdir" \
 582                 distdir) \
 583               || exit 1; \
 584           fi; \
 585         done
 586         -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 587           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 588           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 589           ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 590         || chmod -R a+r $(distdir)
 591 dist-gzip: distdir
 592         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 593         $(am__remove_distdir)
 594
 595 dist-bzip2: distdir
 596         tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 597         $(am__remove_distdir)
 598
 599 dist-tarZ: distdir
 600         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 601         $(am__remove_distdir)
 602
 603 dist-shar: distdir
 604         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 605         $(am__remove_distdir)
 606
 607 dist-zip: distdir
 608         -rm -f $(distdir).zip
 609         zip -rq $(distdir).zip $(distdir)
 610         $(am__remove_distdir)
 611
 612 dist dist-all: distdir
 613         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 614         $(am__remove_distdir)
 615
 616 # This target untars the dist file and tries a VPATH configuration.  Then
 617 # it guarantees that the distribution is self-contained by making another
 618 # tarfile.
 619 distcheck: dist
 620         case '$(DIST_ARCHIVES)' in \
 621         *.tar.gz*) \
 622           GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 623         *.tar.bz2*) \
 624           bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 625         *.tar.Z*) \
 626           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 627         *.shar.gz*) \
 628           GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 629         *.zip*) \
 630           unzip $(distdir).zip ;;\
 631         esac
 632         chmod -R a-w $(distdir); chmod a+w $(distdir)
 633         mkdir $(distdir)/_build
 634         mkdir $(distdir)/_inst
 635         chmod a-w $(distdir)
 636         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 637           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 638           && cd $(distdir)/_build \
 639           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 640             $(DISTCHECK_CONFIGURE_FLAGS) \
 641           && $(MAKE) $(AM_MAKEFLAGS) \
 642           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 643           && $(MAKE) $(AM_MAKEFLAGS) check \
 644           && $(MAKE) $(AM_MAKEFLAGS) install \
 645           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 646           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 647           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 648                 distuninstallcheck \
 649           && chmod -R a-w "$$dc_install_base" \
 650           && ({ \
 651                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 652                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 653                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 654                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 655                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 656               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 657           && rm -rf "$$dc_destdir" \
 658           && $(MAKE) $(AM_MAKEFLAGS) dist \
 659           && rm -rf $(DIST_ARCHIVES) \
 660           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
 661         $(am__remove_distdir)
 662         @(echo "$(distdir) archives ready for distribution: "; \
 663           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 664           sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
 665 distuninstallcheck:
 666         @cd $(distuninstallcheck_dir) \
 667         && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 668            || { echo "ERROR: files left after uninstall:" ; \
 669                 if test -n "$(DESTDIR)"; then \
 670                   echo "  (check DESTDIR support)"; \
 671                 fi ; \
 672                 $(distuninstallcheck_listfiles) ; \
 673                 exit 1; } >&2
 674 distcleancheck: distclean
 675         @if test '$(srcdir)' = . ; then \
 676           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 677           exit 1 ; \
 678         fi
 679         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 680           || { echo "ERROR: files left in build directory after distclean:" ; \
 681                $(distcleancheck_listfiles) ; \
 682                exit 1; } >&2
 683 check-am: all-am
 684 check: check-recursive
 685 all-am: Makefile all-multi config.h
 686 installdirs: installdirs-recursive
 687 installdirs-am:
 688 install: install-recursive
 689 install-exec: install-exec-recursive
 690 install-data: install-data-recursive
 691 uninstall: uninstall-recursive
 692
 693 install-am: all-am
 694         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 695
 696 installcheck: installcheck-recursive
 697 install-strip:
 698         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 699           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 700           `test -z '$(STRIP)' || \
 701             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 702 mostlyclean-generic:
 703
 704 clean-generic:
 705
 706 distclean-generic:
 707         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 708
 709 maintainer-clean-generic:
 710         @echo "This command is intended for maintainers to use"
 711         @echo "it deletes files that may require special tools to rebuild."
 712 clean: clean-multi clean-recursive
 713
 714 clean-am: clean-generic clean-libtool mostlyclean-am
 715
 716 distclean: distclean-multi distclean-recursive
 717         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 718         -rm -f Makefile
 719 distclean-am: clean-am distclean-generic distclean-hdr \
 720         distclean-libtool distclean-tags
 721
 722 dvi: dvi-recursive
 723
 724 dvi-am:
 725
 726 html: html-recursive
 727
 728 info: info-recursive
 729
 730 info-am:
 731
 732 install-data-am:
 733
 734 install-exec-am: install-multi
 735
 736 install-info: install-info-recursive
 737
 738 install-man:
 739
 740 installcheck-am:
 741
 742 maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
 743         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 744         -rm -rf $(top_srcdir)/autom4te.cache
 745         -rm -f Makefile
 746 maintainer-clean-am: distclean-am maintainer-clean-generic
 747
 748 mostlyclean: mostlyclean-multi mostlyclean-recursive
 749
 750 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 751
 752 pdf: pdf-recursive
 753
 754 pdf-am:
 755
 756 ps: ps-recursive
 757
 758 ps-am:
 759
 760 uninstall-am: uninstall-info-am
 761
 762 uninstall-info: uninstall-info-recursive
 763
 764 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-multi \
 765         am--refresh check check-am clean clean-generic clean-libtool \
 766         clean-multi clean-recursive ctags ctags-recursive dist \
 767         dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
 768         distcheck distclean distclean-generic distclean-hdr \
 769         distclean-libtool distclean-multi distclean-recursive \
 770         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 771         dvi-am html html-am info info-am install install-am \
 772         install-data install-data-am install-exec install-exec-am \
 773         install-info install-info-am install-man install-multi \
 774         install-strip installcheck installcheck-am installdirs \
 775         installdirs-am maintainer-clean maintainer-clean-generic \
 776         maintainer-clean-multi maintainer-clean-recursive mostlyclean \
 777         mostlyclean-generic mostlyclean-libtool mostlyclean-multi \
 778         mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
 779         uninstall uninstall-am uninstall-info-am
 780
 781
 782 # These rules are messy, but are hella worth it.
 783 doxygen:
 784         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 785           builddir=`${PWD_COMMAND}`; \
 786           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 787                     --host_alias=${host_alias} \
 788                     --mode=user $${srcdir} $${builddir})
 789
 790 doxygen-maint:
 791         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 792           builddir=`${PWD_COMMAND}`; \
 793           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 794                     --host_alias=${host_alias} \
 795                     --mode=maint $${srcdir} $${builddir})
 796
 797 doxygen-man:
 798         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 799           builddir=`${PWD_COMMAND}`; \
 800           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 801                     --host_alias=${host_alias} \
 802                     --mode=man $${srcdir} $${builddir})
 803
 804 .PHONY: doxygen doxygen-maint doxygen-man
 805
 806 # Handy forwarding targets.
 807 check-%:
 808         cd testsuite && $(MAKE) $@
 809
 810 # All the machinations with string instantiations messes up the
 811 # automake-generated TAGS rule. Make a simple one here.
 812 TAGS: tags-recursive $(LISP)
 813
 814 # Installation of distribution html documentation not yet supported
 815 # TODO: Write custom install-html rule.
 816 .PHONY: install-html install-pdf
 817 install-html:
 818
 819 # No install-pdf support in automake yet
 820 install-pdf:
 821 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 822 # Otherwise a system limit (for SysV at least) may be exceeded.
 823 .NOEXPORT: