libgo: Export {enter,exit}syscall and use it for getaddrinfo.

[pf3gnuchains/gcc-fork.git] / libgo / runtime / cpuprof.c

// Copyright 2011 The Go Authors.  All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// CPU profiling.
// Based on algorithms and data structures used in
// http://code.google.com/p/google-perftools/.
//
// The main difference between this code and the google-perftools
// code is that this code is written to allow copying the profile data
// to an arbitrary io.Writer, while the google-perftools code always
// writes to an operating system file.
//
// The signal handler for the profiling clock tick adds a new stack trace
// to a hash table tracking counts for recent traces.  Most clock ticks
// hit in the cache.  In the event of a cache miss, an entry must be 
// evicted from the hash table, copied to a log that will eventually be
// written as profile data.  The google-perftools code flushed the
// log itself during the signal handler.  This code cannot do that, because
// the io.Writer might block or need system calls or locks that are not
// safe to use from within the signal handler.  Instead, we split the log
// into two halves and let the signal handler fill one half while a goroutine
// is writing out the other half.  When the signal handler fills its half, it
// offers to swap with the goroutine.  If the writer is not done with its half,
// we lose the stack trace for this clock tick (and record that loss).
// The goroutine interacts with the signal handler by calling getprofile() to
// get the next log piece to write, implicitly handing back the last log
// piece it obtained.
//
// The state of this dance between the signal handler and the goroutine
// is encoded in the Profile.handoff field.  If handoff == 0, then the goroutine
// is not using either log half and is waiting (or will soon be waiting) for
// a new piece by calling notesleep(&p->wait).  If the signal handler
// changes handoff from 0 to non-zero, it must call notewakeup(&p->wait)
// to wake the goroutine.  The value indicates the number of entries in the
// log half being handed off.  The goroutine leaves the non-zero value in
// place until it has finished processing the log half and then flips the number
// back to zero.  Setting the high bit in handoff means that the profiling is over, 
// and the goroutine is now in charge of flushing the data left in the hash table
// to the log and returning that data.  
//
// The handoff field is manipulated using atomic operations.
// For the most part, the manipulation of handoff is orderly: if handoff == 0
// then the signal handler owns it and can change it to non-zero.  
// If handoff != 0 then the goroutine owns it and can change it to zero.
// If that were the end of the story then we would not need to manipulate
// handoff using atomic operations.  The operations are needed, however,
// in order to let the log closer set the high bit to indicate "EOF" safely
// in the situation when normally the goroutine "owns" handoff.

#include "runtime.h"
#include "arch.h"
#include "malloc.h"

#include "array.h"
typedef struct __go_open_array Slice;
#define array __values
#define len __count
#define cap __capacity

enum
{
        HashSize = 1<<10,
        LogSize = 1<<17,
        Assoc = 4,
        MaxStack = 64,
};

typedef struct Profile Profile;
typedef struct Bucket Bucket;
typedef struct Entry Entry;

struct Entry {
        uintptr count;
        uintptr depth;
        uintptr stack[MaxStack];
};

struct Bucket {
        Entry entry[Assoc];
};

struct Profile {
        bool on;                // profiling is on
        Note wait;              // goroutine waits here
        uintptr count;          // tick count
        uintptr evicts;         // eviction count
        uintptr lost;           // lost ticks that need to be logged
        uintptr totallost;      // total lost ticks

        // Active recent stack traces.
        Bucket hash[HashSize];

        // Log of traces evicted from hash.
        // Signal handler has filled log[toggle][:nlog].
        // Goroutine is writing log[1-toggle][:handoff].
        uintptr log[2][LogSize/2];
        uintptr nlog;
        int32 toggle;
        uint32 handoff;
        
        // Writer state.
        // Writer maintains its own toggle to avoid races
        // looking at signal handler's toggle.
        uint32 wtoggle;
        bool wholding;  // holding & need to release a log half
        bool flushing;  // flushing hash table - profile is over
};

static Lock lk;
static Profile *prof;

static void tick(uintptr*, int32);
static void add(Profile*, uintptr*, int32);
static bool evict(Profile*, Entry*);
static bool flushlog(Profile*);

// LostProfileData is a no-op function used in profiles
// to mark the number of profiling stack traces that were
// discarded due to slow data writers.
static void LostProfileData(void) {
}

extern void runtime_SetCPUProfileRate(int32)
     __asm__("libgo_runtime.runtime.SetCPUProfileRate");

// SetCPUProfileRate sets the CPU profiling rate.
// The user documentation is in debug.go.
void
runtime_SetCPUProfileRate(int32 hz)
{
        uintptr *p;
        uintptr n;

        // Clamp hz to something reasonable.
        if(hz < 0)
                hz = 0;
        if(hz > 1000000)
                hz = 1000000;

        runtime_lock(&lk);
        if(hz > 0) {
                if(prof == nil) {
                        prof = runtime_SysAlloc(sizeof *prof);
                        if(prof == nil) {
                                runtime_printf("runtime: cpu profiling cannot allocate memory\n");
                                runtime_unlock(&lk);
                                return;
                        }
                }
                if(prof->on || prof->handoff != 0) {
                        runtime_printf("runtime: cannot set cpu profile rate until previous profile has finished.\n");
                        runtime_unlock(&lk);
                        return;
                }

                prof->on = true;
                p = prof->log[0];
                // pprof binary header format.
                // http://code.google.com/p/google-perftools/source/browse/trunk/src/profiledata.cc#117
                *p++ = 0;  // count for header
                *p++ = 3;  // depth for header
                *p++ = 0;  // version number
                *p++ = 1000000 / hz;  // period (microseconds)
                *p++ = 0;
                prof->nlog = p - prof->log[0];
                prof->toggle = 0;
                prof->wholding = false;
                prof->wtoggle = 0;
                prof->flushing = false;
                runtime_noteclear(&prof->wait);

                runtime_setcpuprofilerate(tick, hz);
        } else if(prof->on) {
                runtime_setcpuprofilerate(nil, 0);
                prof->on = false;

                // Now add is not running anymore, and getprofile owns the entire log.
                // Set the high bit in prof->handoff to tell getprofile.
                for(;;) {
                        n = prof->handoff;
                        if(n&0x80000000)
                                runtime_printf("runtime: setcpuprofile(off) twice");
                        if(runtime_cas(&prof->handoff, n, n|0x80000000))
                                break;
                }
                if(n == 0) {
                        // we did the transition from 0 -> nonzero so we wake getprofile
                        runtime_notewakeup(&prof->wait);
                }
        }
        runtime_unlock(&lk);
}

static void
tick(uintptr *pc, int32 n)
{
        add(prof, pc, n);
}

// add adds the stack trace to the profile.
// It is called from signal handlers and other limited environments
// and cannot allocate memory or acquire locks that might be
// held at the time of the signal, nor can it use substantial amounts
// of stack.  It is allowed to call evict.
static void
add(Profile *p, uintptr *pc, int32 n)
{
        int32 i, j;
        uintptr h, x;
        Bucket *b;
        Entry *e;

        if(n > MaxStack)
                n = MaxStack;
        
        // Compute hash.
        h = 0;
        for(i=0; i<n; i++) {
                h = h<<8 | (h>>(8*(sizeof(h)-1)));
                x = pc[i];
                h += x*31 + x*7 + x*3;
        }
        p->count++;

        // Add to entry count if already present in table.
        b = &p->hash[h%HashSize];
        for(i=0; i<Assoc; i++) {
                e = &b->entry[i];
                if(e->depth != (uintptr)n)      
                        continue;
                for(j=0; j<n; j++)
                        if(e->stack[j] != pc[j])
                                goto ContinueAssoc;
                e->count++;
                return;
        ContinueAssoc:;
        }

        // Evict entry with smallest count.
        e = &b->entry[0];
        for(i=1; i<Assoc; i++)
                if(b->entry[i].count < e->count)
                        e = &b->entry[i];
        if(e->count > 0) {
                if(!evict(p, e)) {
                        // Could not evict entry.  Record lost stack.
                        p->lost++;
                        p->totallost++;
                        return;
                }
                p->evicts++;
        }
        
        // Reuse the newly evicted entry.
        e->depth = n;
        e->count = 1;
        for(i=0; i<n; i++)
                e->stack[i] = pc[i];
}

// evict copies the given entry's data into the log, so that
// the entry can be reused.  evict is called from add, which
// is called from the profiling signal handler, so it must not
// allocate memory or block.  It is safe to call flushLog.
// evict returns true if the entry was copied to the log,
// false if there was no room available.
static bool
evict(Profile *p, Entry *e)
{
        int32 i, d, nslot;
        uintptr *log, *q;
        
        d = e->depth;
        nslot = d+2;
        log = p->log[p->toggle];
        if(p->nlog+nslot > nelem(p->log[0])) {
                if(!flushlog(p))
                        return false;
                log = p->log[p->toggle];
        }
        
        q = log+p->nlog;
        *q++ = e->count;
        *q++ = d;
        for(i=0; i<d; i++)
                *q++ = e->stack[i];
        p->nlog = q - log;
        e->count = 0;
        return true;
}

// flushlog tries to flush the current log and switch to the other one.
// flushlog is called from evict, called from add, called from the signal handler,
// so it cannot allocate memory or block.  It can try to swap logs with
// the writing goroutine, as explained in the comment at the top of this file.
static bool
flushlog(Profile *p)
{
        uintptr *log, *q;

        if(!runtime_cas(&p->handoff, 0, p->nlog))
                return false;
        runtime_notewakeup(&p->wait);

        p->toggle = 1 - p->toggle;
        log = p->log[p->toggle];
        q = log;
        if(p->lost > 0) {
                *q++ = p->lost;
                *q++ = 1;
                *q++ = (uintptr)LostProfileData;
        }
        p->nlog = q - log;
        return true;
}

// getprofile blocks until the next block of profiling data is available
// and returns it as a []byte.  It is called from the writing goroutine.
Slice
getprofile(Profile *p)
{
        uint32 i, j, n;
        Slice ret;
        Bucket *b;
        Entry *e;

        ret.array = nil;
        ret.len = 0;
        ret.cap = 0;
        
        if(p == nil)    
                return ret;

        if(p->wholding) {
                // Release previous log to signal handling side.
                // Loop because we are racing against setprofile(off).
                for(;;) {
                        n = p->handoff;
                        if(n == 0) {
                                runtime_printf("runtime: phase error during cpu profile handoff\n");
                                return ret;
                        }
                        if(n & 0x80000000) {
                                p->wtoggle = 1 - p->wtoggle;
                                p->wholding = false;
                                p->flushing = true;
                                goto flush;
                        }
                        if(runtime_cas(&p->handoff, n, 0))
                                break;
                }
                p->wtoggle = 1 - p->wtoggle;
                p->wholding = false;
        }
        
        if(p->flushing)
                goto flush;
        
        if(!p->on && p->handoff == 0)
                return ret;

        // Wait for new log.
        runtime_entersyscall();
        runtime_notesleep(&p->wait);
        runtime_exitsyscall();
        runtime_noteclear(&p->wait);

        n = p->handoff;
        if(n == 0) {
                runtime_printf("runtime: phase error during cpu profile wait\n");
                return ret;
        }
        if(n == 0x80000000) {
                p->flushing = true;
                goto flush;
        }
        n &= ~0x80000000;

        // Return new log to caller.
        p->wholding = true;

        ret.array = (byte*)p->log[p->wtoggle];
        ret.len = n*sizeof(uintptr);
        ret.cap = ret.len;
        return ret;

flush:
        // In flush mode.
        // Add is no longer being called.  We own the log.
        // Also, p->handoff is non-zero, so flushlog will return false.
        // Evict the hash table into the log and return it.
        for(i=0; i<HashSize; i++) {
                b = &p->hash[i];
                for(j=0; j<Assoc; j++) {
                        e = &b->entry[j];
                        if(e->count > 0 && !evict(p, e)) {
                                // Filled the log.  Stop the loop and return what we've got.
                                goto breakflush;
                        }
                }
        }
breakflush:

        // Return pending log data.
        if(p->nlog > 0) {
                // Note that we're using toggle now, not wtoggle,
                // because we're working on the log directly.
                ret.array = (byte*)p->log[p->toggle];
                ret.len = p->nlog*sizeof(uintptr);
                ret.cap = ret.len;
                p->nlog = 0;
                return ret;
        }

        // Made it through the table without finding anything to log.
        // Finally done.  Clean up and return nil.
        p->flushing = false;
        if(!runtime_cas(&p->handoff, p->handoff, 0))
                runtime_printf("runtime: profile flush racing with something\n");
        return ret;  // set to nil at top of function
}

extern Slice runtime_CPUProfile(void)
     __asm__("libgo_runtime.runtime.CPUProfile");

// CPUProfile returns the next cpu profile block as a []byte.
// The user documentation is in debug.go.
Slice
runtime_CPUProfile(void)
{
        return getprofile(prof);
}