1 2011-03-18 Pedro Alves <pedro@codesourcery.com>
3 * findvar.c (value_of_register): Mark the value as unavailable, if
4 the register is unavailable.
5 * frame.h (frame_register_unwind): New `unavailablep' parameter.
6 (frame_register): New `unavailablep' parameter.
7 (frame_register_read): Update comment.
8 * frame.c (frame_register_unwind): New `unavailablep' parameter.
9 Set it if the register is unavailable. If the register is
10 unavailable, clear the output buffer.
11 (frame_register): New `unavailablep' parameter. Pass it down.
12 (frame_unwind_register): Adjust.
13 (put_frame_register): Adjust.
14 (frame_register_read): Adjust. Also return false if the register
16 (frame_register_unwind_location): Adjust.
17 * sentinel-frame.c (sentinel_frame_prev_register): If the register
18 is unavailable, mark the value accordingly.
19 * stack.c (frame_info): Handle unavailable registers.
21 2011-03-18 Pedro Alves <pedro@codesourcery.com>
23 * mi/mi-main.c (register_changed_p): Handle REG_UNAVAILABLE, and
24 simplify, using regcache_cooked_read.
26 2011-03-18 Pedro Alves <pedro@codesourcery.com>
28 * regcache.h (regcache_raw_read, regcache_raw_read_signed)
29 (regcache_raw_read_unsigned, regcache_raw_read_signed)
30 (regcache_raw_read_unsigned, regcache_raw_read_part)
31 (regcache_cooked_read, regcache_cooked_read_signed)
32 (regcache_cooked_read_unsigned, regcache_cooked_read_part)
33 (regcache_cooked_read_ftype): Change return to enum
35 * regcache.c: Include exceptions.h
36 (regcache_save): Adjust to handle REG_UNAVAILABLE registers.
37 (do_cooked_read): Change return to enum register_status. Always
38 forward to regcache_cooked_read.
39 (regcache_raw_read): Change return to enum register_status. If
40 the register is not REG_VALID, memset the buffer. Return the
42 (regcache_raw_read_signed): Handle non-REG_VALID registers and
43 return the register's status.
44 (regcache_raw_read_unsigned): Ditto.
45 (regcache_cooked_read): Change return to enum register_status.
46 Assert that with read-only regcaches, the register's status must
47 be known. If the regcache is read-only, and the register is not
48 REG_VALID, memset the buffer. Return the register's status.
49 (regcache_cooked_read_signed): Change return to enum
50 register_status. Handle non-REG_VALID registers and return the
52 (regcache_cooked_read_unsigned): Change return to enum
53 register_status. Handle non-REG_VALID registers and return the
55 (regcache_xfer_part, regcache_raw_read_part)
56 (regcache_cooked_read_part): Change return to enum
57 register_status. Return the register's status.
58 (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
60 (regcache_dump): Handle unavailable cooked registers.
61 * frame.c (do_frame_register_read): Adjust interface to match
62 regcache_cooked_read_ftype.
63 * gdbarch.sh (pseudo_register_read): Change return to enum
65 * gdbarch.h, gdbarch.c: Regenerate.
67 * i386-tdep.h (i386_pseudo_register_read): Change return to enum
69 * i386-tdep.c (i386_pseudo_register_read): Change return to enum
70 register_status. If reading a raw register indicates the raw
71 register is not valid, return the raw register's status,
72 otherwise, return REG_VALID.
73 * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
74 register_status. Handle non-REG_VALID raw registers and return
75 the register's status.
76 * arm-tdep.c (arm_neon_quad_read)
77 (arm_pseudo_read): Change return to enum register_status. Handle
78 non-REG_VALID raw registers and return the register's status.
79 * avr-tdep.c (avr_pseudo_register_read): Ditto.
80 * frv-tdep.c (frv_pseudo_register_read): Ditto.
81 * h8300-tdep.c (h8300_pseudo_register_read): Ditto.
82 * hppa-tdep.c (hppa_pseudo_register_read): Ditto.
83 * m32c-tdep.c (m32c_move_reg_t): Change return to enum
85 (m32c_raw_read, m32c_raw_write, m32c_banked_read)
86 (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
87 (m32c_part_write, m32c_cat_read, m32c_cat_write)
88 (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
89 (m32c_pseudo_register_read): Change return to enum
90 register_status. Adjust.
91 * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
92 enum register_status. Return the register's status.
93 * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
94 register_status. Return the register's status.
95 (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
96 * mips-tdep.c (mips_pseudo_register_read): Ditto.
97 * mt-tdep.c (mt_pseudo_register_read): Ditto.
98 * rs6000-tdep.c (move_ev_register_func): New typedef.
99 (e500_move_ev_register): Use it. Change return to enum
100 register_status. Return the register's status.
101 (do_regcache_raw_read): New function.
102 (do_regcache_raw_write): New function.
103 (e500_pseudo_register_read): Change return to enum
104 register_status. Return the register's status. Use
105 do_regcache_raw_read.
106 (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
107 (dfp_pseudo_register_read): Change return to enum register_status.
108 Return the register's status.
109 (vsx_pseudo_register_read): Ditto.
110 (efpr_pseudo_register_read): Ditto.
111 (rs6000_pseudo_register_read): Ditto.
112 * s390-tdep.c (s390_pseudo_register_read): Change return to enum
113 register_status. Return the register's status.
114 * sh64-tdep.c (pseudo_register_read_portions): New function.
115 (sh64_pseudo_register_read): Change return to enum
116 register_status. Use pseudo_register_read_portions. Return the
118 * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
119 register_status. Return the register's status.
120 * sh-tdep.c (pseudo_register_read_portions): New function.
121 (sh_pseudo_register_read): Change return to enum register_status.
122 Use pseudo_register_read_portions. Return the register's status.
123 * sparc-tdep.c (sparc32_pseudo_register_read): Change return to
124 enum register_status. Return the register's status.
125 * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
126 * spu-tdep.c (spu_pseudo_register_read_spu)
127 (spu_pseudo_register_read): Ditto.
128 * xtensa-tdep.c (xtensa_register_read_masked)
129 (xtensa_pseudo_register_read): Ditto.
130 * bfin-tdep.c (bfin_pseudo_register_read): Ditto.
132 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
134 * python/py-value.c (valpy_getitem): Fix formatting of error function
137 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
139 ARI fixes: Add missing internationalization markups throughout
141 * darwin-nat-info.c: Ditto.
144 * mi/mi-main.c: Ditto.
146 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
148 ARI fixes: Add missing internationalization markups throughout
151 * cp-name-parser.y: Ditto.
157 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
159 ARI fixes: Messages should have no trailing new lines.
160 * darwin-nat.c (mach_check_error): Remove trailing new line from
161 warning function call message.
162 * record.c (bfdcore_read): Idem for error call.
164 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
166 * common/signals.c (target_signal_from_host): Add _ markup to error
167 function call message.
168 (target_signal_to_host): Add _ markup and remove trailing new line
169 from warning call message.
170 (target_signal_from_command): Add _ markup to error function call
173 2011-03-18 Phil Muldoon <pmuldoon@redhat.com>
177 * python/python.c (gdbpy_write): Accept a stream argument and
178 operate to the appropriate stream.
179 (gdbpy_flush): Likewise.
180 (_initialize_python): Add stream constants.
181 (finish_python_initialization): Add GdbOutputErrorFile class.
183 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com>
185 * MAINTAINERS: Add myself as a write-after-approval maintainer.
187 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com>
189 * amd64-tdep.c (amd64_relocate_instruction): Fix ordering of arguments
190 to store_signed_integer. Add debug message when relocating CALL
191 instructions. Fix formatting of debug message.
192 * i386-tdep.c (i386_relocate_instruction): Ditto.
194 2011-03-17 Joel Brobecker <brobecker@gnat.com>
196 * target.h (struct target_ops): Remove to_lookup_symbol field.
197 (target_lookup_symbol): Delete macro.
198 * target.c (nosymbol, debug_to_lookup_symbol): Delete.
199 (update_current_target, setup_target_debug): Remove handling
200 of to_lookup_symbol target_ops field.
201 * ada-tasks.c (get_known_tasks_addr): Remove use of
202 target_lookup_symbol.
203 * coffread.c (coff_symtab_read): Likewise.
204 * dbxread.c (read_dbx_symtab): Ditto.
206 2011-03-17 Joel Brobecker <brobecker@gnat.com>
209 * configure.ac: Add getthrds declaration check.
210 * configure, config.in: Regenerate.
211 * aix-thread.c (getthrds): Declare only if not already declared
212 in procinfo.h. More declaration out of get_signaled_thread to
215 2011-03-17 Phil Muldoon <pmuldoon@redhat.com>
217 * python/py-symtab.c: Populate symtab_object_methods,
219 (stpy_is_valid): New function.
220 (salpy_is_valid): Ditto.
221 * python/py-symbol.c: Declare symbol_object_methods. Populate.
222 (sympy_is_valid): New function.
223 * python/py-objfile.c: Declare objfile_object_methods. Populate.
224 (objfpy_is_valid): New function.
225 * python/py-inferior.c: Populate inferior_object_methods.
226 (infpy_is_valid): New function.
227 * python/py-infthread.c: Populate thread_object_methods.
228 (thpy_is_valid): New function.
229 * python/py-block.c: Declare block_object_methods. Populate. Declare
230 block_iterator_object_methods. Populate.
231 (blpy_is_valid): New function.
232 (blpy_iter_is_valid): Ditto.
234 2011-03-16 Keith Seitz <keiths@redhat.com>
236 * linespec.c (find_methods): Canonicalize NAME before looking
238 (name_end): New function.
239 (keep_name_info): New function.
240 (decode_line_1): Use keep_name_info.
241 (decode_compound): Likewise.
242 * cli/cli-utils.h (remove_trailing_whitespace): New function.
243 * cli/cli-utils.c (remove_trailing_whitespace): Likewise.
246 * linespec.c (locate_first_half): Keep overload information, too.
247 (decode_compound): Use a string to represent break characters
249 If P points to a break character, do not increment it.
250 For C++ and Java, keep overload information and relevant keywords.
251 If we cannot find a symbol, search the minimal symbols.
254 * linespec.c (decode_compound): Rename SAVED_ARG to
256 Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip
258 Pass a valid block to lookup_symbol.
259 (lookup_prefix_sym): Likewise.
260 (find_method): Construct search name based on SYM_CLASS instead
262 * psymtab.c (lookup_partial_symbol): Add language parameter.
263 (lookup_symbol_aux_psymtabs): Likewise.
264 Don't assume that the psymtab we found was the right one. Search
265 for the desired symbol in the symtab to be certain.
266 (psymtab_search_name): New function.
267 (lookup_partial_symbol): Use psymtab_search_name.
268 Add language parameter.
269 (read_symtabs_for_function): Add language parameter and pass to
270 lookup_partial_symbol.
271 (find_symbol_file_from_partial): Likewise.
273 2011-03-16 Paul Pluzhnikov <ppluzhnikov@google.com>
276 * dwarf2read.c (noop_record_line): New function.
277 (dwarf_decode_lines): Ignore line tables for GCd functions.
279 2011-03-16 Pierre Muller <muller@ics.u-strasbg.fr>
281 Fix ARI warnings about new lines at the end of messages, which
282 are unneeded as there is a new line added at the end of the message
284 * darwin-nat.c (darwin_stop_inferior): Ditto.
285 * dec-thread.c (dec_thread_get_ada_task_ptid): Ditto.
286 * dfp.c (decimal_to_number): Ditto.
287 * exec.c (print_section_info): Ditto.
288 * i386-darwin-nat.c (darwin_set_sstep): Ditto.
289 * osdata.c (get_osdata): Ditto.
290 * record.c (bfdcore_write): Ditto.
291 * remote-mips.c (mips_readchar): Ditto.
292 * remote.c (read_ptid): Ditto.
293 * ser-mingw.c (ser_windows_raw): Ditto.
294 * tracepoint.c (add_local_symbols): Ditto.
295 * windows-nat.c (fake_create_process): Ditto.
297 2011-03-16 Tom Tromey <tromey@redhat.com>
299 * tracepoint.c (stop_tracing): Don't declare.
300 * event-top.c (after_char_processing_hook): Add `(void)'.
302 2011-03-16 Phil Muldoon <pmuldoon@redhat.com>
304 * NEWS: Add Parameter sub-classing description.
306 2011-03-16 Kai Tietz <ktietz@redhat.com>
308 * MAINTAINERS: Update my e-mail address.
310 2011-03-15 Andreas Tobler <andreast@fgznet.ch>
312 * MAINTAINERS: Add myself for write after approval privileges.
314 2011-03-15 Michael Snyder <msnyder@vmware.com>
316 * frame.c (find_frame_sal): Assert sym is not null.
318 * dbxread.c (process_one_symbol): Assert 'name' is not null.
320 * objc-lang.c (selectors_info): Check strchr for null result.
322 * stabsread.c (define_symbol): Guard against bad stabstring input.
324 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
326 Remove trailing spaces and tabulations from pascal language
333 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
335 * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
336 than LOW. Comment it.
337 (read_partial_die): Call complaint for inappropriate zero LOWPC or
338 HIGHPC not strictly higher than LOWPC.
340 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
342 Fix formatting of function declarations returning a pointer in
344 * varobj.c (varobj_add_child): Ditto.
345 * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
346 * inferior.h (get_displaced_step_closure_by_addr): Ditto.
348 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
350 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
351 for the "generic" vector ABI used with GCC 4.3 and later.
352 (ppc64_sysv_abi_return_value): Likewise.
354 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
356 * infcall.c (call_function_by_hand): Function return value is
357 always a non_lval, even when using struct_return.
359 2011-03-15 Pedro Alves <pedro@codesourcery.com>
361 * printcmd.c (ALL_DISPLAYS_SAFE): New.
362 (map_display_numbers): New.
363 (do_delete_display): New.
364 (undisplay_command): Use map_display_numbers.
365 (do_enable_disable_display): New.
366 (enable_disable_display_command): New function.
367 (enable_display): Delete.
368 (enable_display_command): New.
369 (disable_display_command): Reimplement.
370 (_initialize_printcmd): Adjust "enable display" command to use
371 `enable_display_command' as callback.
373 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
375 * NEWS: Add Python breakpoint 'stop' operation.
377 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
379 * NEWS: Delete duplicate entry. Fix typo.
381 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
383 Fix ARI warning about function names in first column.
384 Put prototype declaration on same line as return type.
387 * python/py-stopevent.h: Ditto.
388 For long function names, split parameters to
389 allow function name on same line as return type.
390 * solib-pa64.c: Ditto.
393 For long function declaration, use single line.
394 * hppa-tdep.h: Ditto.
397 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
399 * python/python.h: Declare gdbpy_should_stop and
400 gdbpy_breakpoint_has_py_cond.
401 * python/python.c: Add python.h to includes. Remove python.h from
402 HAVE_PYTHON definition
403 (gdbpy_should_stop): New dummy function.
404 (gdbpy_breakpoint_has_py_cond): New dummy function.
405 * python/py-breakpoint.c (bppy_init): Rewrite to allow
406 sub-classing capabilities.
407 (gdbpy_should_stop): New function.
408 (gdbpy_breakpoint_has_py_cond): New function.
409 (local_setattro): New function.
410 * breakpoint.c (condition_command): Add check for Python 'stop'
412 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
413 operation function as part of stop/continue tests.
415 2011-03-14 Tom Tromey <tromey@redhat.com>
418 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
419 (needs_frame_dwarf_call): Likewise.
421 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
423 Fix ARI warning about functions without parameters that do not
425 * breakpoint.c (all_tracepoints): Replace () by (void).
426 * f-exp.y (match_string_literal): Ditto.
428 * m2-exp.y (yylex): Ditto.
429 * mep-tdep.c (current_me_module): Ditto.
430 (current_options): Ditto.
431 (current_cop_data_bus_width): Ditto.
432 (current_cr_names): Ditto.
433 (current_cr_is_float): Ditto.
434 (current_ccr_names): Ditto.
435 * objc-exp.y (yylex): Ditto.
436 * p-exp.y (yylex): Ditto.
437 * remote.c (send_interrupt_sequence): Ditto.
438 * tracepoint.c (current_trace_status): Ditto.
439 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
440 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
442 2011-03-11 Michael Snyder <msnyder@vmware.com>
444 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
445 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
446 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
447 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
448 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
450 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
451 (delete_async_event_handler): Ditto.
453 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
455 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
457 * top.c (set_verbose): Assert showcmd was found.
459 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
461 * xtensa-tdep.c (warning_once): Correct style issues.
463 2011-03-11 Yao Qi <yao@codesourcery.com>
465 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
467 2011-03-11 Andreas Schwab <schwab@redhat.com>
469 * common/aclocal.m4: Remove.
471 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
473 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
474 (xtensa_write_register, xtensa_read_register): Likewise.
475 (xtensa_hextochar): Removed.
476 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
478 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
480 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
481 (xtensa_call0_frame_cache_t): Update comments. New fields added.
482 (xtensa_alloc_frame_cache): Add initialization for new fields.
483 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
484 (warning_once): New function.
485 (xtensa_insn_kind): New item c0opc_and.
486 (call0_classify_opcode): Add the case for AND instruction.
487 (call0_track_op): Change arguments. New local variable litbase.
488 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
489 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
491 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
492 (call0_analyze_prologue): Update the comments. Change arguments.
493 Add the variety of updates to handle extended prologues, which now can
494 conduct dynamic stack adjustments.
495 (call0_frame_cache): Likewise.
496 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
497 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
499 2011-03-10 Michael Snyder <msnyder@vmware.com>
501 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
502 (cmd_qtframe): Ditto.
503 (cmd_qtbuffer): Ditto.
504 (cmd_bigqtbuffer): Ditto.
506 2011-03-10 Tom Tromey <tromey@redhat.com>
508 * tracepoint.c (trace_actions_command): Update.
509 * thread.c (thread_apply_command): Update.
510 * reverse.c (delete_bookmark_command): Update.
511 (bookmarks_info): Update.
512 * printcmd.c (undisplay_command): Update.
513 * memattr.c (mem_enable_command): Update.
514 (mem_disable_command): Update.
515 (mem_delete_command): Update.
516 * inferior.c (detach_inferior_command): Update.
517 (kill_inferior_command): Update.
518 (remove_inferior_command): Update.
519 * cli/cli-utils.h (struct get_number_or_range_state): New.
520 (init_number_or_range): Declare.
521 (get_number_or_range): Update.
522 * cli/cli-utils.c (init_number_or_range): New function.
523 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
525 (number_is_in_list): Update.
526 * breakpoint.h (get_tracepoint_by_number): Update.
527 * breakpoint.c (map_breakpoint_numbers): Update for change to
529 (find_location_by_number): Use get_number, not
531 (trace_pass_set_count): New function.
532 (trace_pass_command): Update for change to get_number_or_range.
534 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
537 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
539 * python/py-param.c (add_setshow_generic): Add set/show callback
540 parameters. Register Python object context.
541 (get_show_value): New function.
542 (get_set_value): New function.
543 (call_doc_function): New function.
544 (get_doc_string): Move behind get_show_value/get_set_value.
546 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
548 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
550 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
552 * xtensa-tdep.c (xtensa_read_register): Add comment.
553 (xtensa_write_register): Likewise.
554 (xtensa_hextochar): Add comment and update to match coding conventions.
555 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
556 (execute_l32e, execute_s32e, execute_code): Update comments.
557 (xtensa_exception_handler_t): Update to match coding conventions.
558 (xtensa_insn_kind): Likewise.
560 2011-03-09 Michael Snyder <msnyder@vmware.com>
562 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
564 2011-03-09 Pedro Alves <pedro@codesourcery.com>
566 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
568 2011-03-09 Tom Tromey <tromey@redhat.com>
570 * thread.c (restore_selected_frame): Handle frame_level == -1.
571 (make_cleanup_restore_current_thread): Use
572 get_selected_frame_if_set.
573 * frame.h (get_selected_frame_if_set): Declare.
574 * frame.c (get_selected_frame_if_set): New function.
576 2011-03-09 Pedro Alves <pedro@codesourcery.com>
578 * cli/cli-cmds.c (shell_escape): Use lbasename.
579 * coffread.c (coff_start_symtab): Constify parameter.
580 (complete_symtab): Constify `name' parameter.
581 (coff_symtab_read): Constify `filestring' local.
582 (coff_getfilename): Constify return and `result' local.
584 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
585 * linux-fork.c (info_checkpoints_command): Use lbasename.
586 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
587 * minsyms.c (lookup_minimal_symbol): Use lbasename.
588 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
589 * procfs.c (procfs_make_note_section): Use lbasename.
590 * tui/tui-io.c (printable_part): Constity return and parameter.
592 (print_filename): Constify parameters, and local `s'.
593 (tui_rl_display_match_list): Constify local `temp'.
595 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
598 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
599 Fix DWARF-3+ DW_AT_accessibility default assumption.
600 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
601 cu->header.version >= 3.
603 2011-03-09 Yao Qi <yao@codesourcery.com>
605 * common/Makefile.in: Remove.
606 * common/configure: Remove.
607 * common/configure.ac: Remove.
609 2011-03-09 Yao Qi <yao@codesourcery.com>
612 2011-02-11 Yao Qi <yao@codesourcery.com>
614 * common/Makefile.in: Add copyright header.
616 2011-02-11 Yao Qi <yao@codesourcery.com>
618 * Makefile.in: Remove signals.o from COMMON_OBS. Link
620 * configure.ac: Add common to sub dir.
621 * configure: Regenerate.
623 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
625 * xtensa-tdep.c (call0_ret): New function.
626 (xtensa_skip_prologue): Speed up analysis.
628 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
630 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
631 while executing MI command -data-list-changed-registers.
633 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
635 * xtensa-tdep.c (xtensa_read_register): New function.
636 (xtensa_write_register): New function.
637 (xtensa_find_register_by_name): New function.
638 (xtensa_windowed_frame_cache): Update comments in type description.
639 (xtensa_frame_cache): Likewise.
640 (xtensa_window_interrupt_insn): New function.
641 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
642 (xtensa_insn_kind): Add new instructions.
643 (rwx_special_register): New function.
644 (call0_classify_opcode): Add new instructions to the analysis.
645 (a0_saved, a7_saved, a11_saved): New variables.
646 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
647 (execute_l32e): New function.
648 (execute_s32e): New function.
649 (xtensa_exception_handler_t): New type.
650 (execute_code): New function.
651 (xtensa_window_interrupt_frame_cache): New function to conduct frame
652 analysis for Xtensa Window Exception handlers.
654 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
656 * xtensa-tdep.c (TX_PS): New.
657 (windowing_enabled): Update to count for Call0 ABI.
658 (xtensa_hextochar): New.
659 (xtensa_init_reggroups): Make algorithm generic.
660 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
662 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
664 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
666 2011-03-08 Michael Snyder <msnyder@vmware.com>
668 * i386-tdep.c (i386_follow_jump): Check return value of
670 (i386_analyze_struct_return): Ditto.
671 (i386_skip_probe): Ditto.
672 (i386_match_insn): Ditto.
673 (i386_skip_noop): Ditto.
674 (i386_analyze_frame_setup): Ditto.
675 (i386_analyze_register_saves): Ditto.
676 (i386_skip_prologue): Ditto.
677 (i386_skip_main_prologue): Ditto.
679 * target.c (read_whatever_is_readable): Fix memory leak.
681 * i386-tdep.c (i386_process_record): Document fall through.
683 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
685 Fix DWARF-3+ DW_AT_accessibility default assumption.
686 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
687 cu->header.version >= 3.
689 2011-03-08 Pedro Alves <pedro@codesourcery.com>
691 * remote.c (remote_check_symbols): Skip if the target has no
694 2011-03-08 Joel Brobecker <brobecker@adacore.com>
696 * target.c (read_whatever_is_readable): Reformat comment,
697 with a minor typo fix. Minor reformatting of the code.
699 2011-03-08 Yao Qi <yao@codesourcery.com>
701 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
702 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
703 Use cached result instead of calling displaced_in_arm_mode again.
704 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
705 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
706 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
707 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
708 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
709 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
710 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
711 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
712 (cleanup_block_load_pc, copy_block_xfer): Likewise.
713 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
714 (arm_catch_kernel_helper_return): Likewise.
715 * gdb/arm-tdep.h : Update function declarations.
717 2011-03-07 Michael Snyder <msnyder@vmware.com>
719 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
721 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
723 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
725 * elfread.c (elf_symtab_read): Stop memory leak.
727 * main.c (captured_main): Fix memory leak.
729 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
731 * ada-lang.c (compare_names): Call is_name_suffix with string1
734 2011-03-07 Tom Tromey <tromey@redhat.com>
736 * xcoffread.c (xcoff_sym_fns): Update.
737 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
738 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
739 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
740 (symbol_file_add_with_addrs_or_offsets): Likewise.
741 (reread_symbols): Handle OBJF_PSYMTABS_READ.
742 * somread.c (som_sym_fns): Update.
743 * psymtab.h (require_partial_symbols): Declare.
744 * psymtab.c (require_partial_symbols): New function.
745 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
746 (ALL_OBJFILE_PSYMTABS): Undef.
747 (ALL_PSYMTABS): Move from psympriv.h.
748 (lookup_partial_symtab, find_pc_sect_psymtab)
749 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
750 (find_last_source_symtab_from_partial)
751 (forget_cached_source_info_partial)
752 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
753 (expand_partial_symbol_tables, read_psymtabs_with_filename)
754 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
755 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
756 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
757 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
758 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
759 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
760 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
762 * mipsread.c (ecoff_sym_fns): Update.
763 * machoread.c (macho_sym_fns): Update.
764 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
765 (read_psyms): New function.
766 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
767 (elf_sym_fns_lazy_psyms): New global.
768 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
769 dwarf2_build_psymtabs.
770 * dbxread.c (aout_sym_fns): Update.
771 * coffread.c (coff_sym_fns): Update.
773 2011-03-07 Tom Tromey <tromey@redhat.com>
775 * infrun.c (print_exited_reason): Include inferior id and pid in
778 2011-03-07 Tom Tromey <tromey@redhat.com>
780 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
782 (target_has_execution_1): Update.
783 (target_has_execution_current): Declare.
784 (target_has_execution): Call target_has_execution_current.
785 (default_child_has_execution): Update.
786 * target.c (default_child_has_execution): Add 'the_ptid'
788 (target_has_execution_1): Likewise.
789 (target_has_execution_current): New function.
790 (add_target): Update.
791 (init_dummy_target): Update.
792 * remote-m32r-sdi.c (m32r_has_execution): New function.
793 (init_m32r_ops): Use it.
794 * record.c (record_core_has_execution): Now static. Add
795 'the_ptid' parameter.
796 * inferior.c (have_live_inferiors): Don't save current thread.
797 Use target_has_execution_1.
799 2011-03-07 Yao Qi <yao@codesourcery.com>
801 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
803 2011-03-07 Joel Brobecker <brobecker@adacore.com>
805 * elfread.c (elf_symtab_read): Minor reformatting.
807 2011-03-07 Joel Brobecker <brobecker@adacore.com>
809 * objc-lang.c (selectors_info): Minor reformatting.
811 2011-03-07 Joel Brobecker <brobecker@adacore.com>
813 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
815 2011-03-07 Joel Brobecker <brobecker@adacore.com>
816 Michael Snyder <msnyder@vmware.com>
818 * ada-valprint.c (ada_val_print_array): Move the declaration of
819 "byte_order" and "elttype" inside the block where these variables
820 are actually used. Remove some special handling for the case
821 where "elttype" and "eltlen" are null. Replace by a comment
822 and a couple of assertion checks.
824 2011-03-05 Michael Snyder <msnyder@vmware.com>
826 * source.c (add_path): Replace semicolon at end of block.
827 * dwarf2expr.c (execute_stack_op): Ditto.
829 2011-03-05 Mike Frysinger <vapier@gentoo.org>
831 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
832 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
833 (bfin-*-*): Likewise.
835 2011-03-05 Michael Snyder <msnyder@vmware.com>
837 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
838 * mdebugread.c (parse_symbol): Ditto.
839 * parse.c (parse_exp_in_context): Ditto.
840 * source.c (add_path): Ditto.
841 * utils.c (gnu_debuglink_crc32): Ditto.
842 * varobj.c (variable_language): Ditto.
844 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
846 2011-03-04 Michael Snyder <msnyder@vmware.com>
848 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
850 * symfile.c (simple_overlay_update): Check for null return value
851 from lookup_minimal_symbol.
853 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
855 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
857 * eval.c (parse_and_eval_address_1): Remove function.
858 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
859 instead of parse_and_eval_address_1.
860 * value.h (parse_and_eval_address_1): Remove prototype.
862 2011-03-04 Michael Snyder <msnyder@vmware.com>
864 * remote.c (putpkt_binary): Document that case stmt falls through.
866 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
868 * breakpointc (print_it_typical): Move NULL check from here...
869 (print_bp_stop_message): ... to here.
871 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
873 * breakpoint.c (enable_command): Use break instead of continue,
874 and fill in a missing break.
875 (disable_command): Ditto.
877 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
879 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
880 (terminal_save_ours): Remove misleading comment.
881 (inflow_inferior_data_cleanup): Free ttystate.
882 (inflow_inferior_exit): Likewise.
883 (copy_terminal_info): Copy ttystate.
885 * serial.c (serial_copy_tty_state): New function.
886 * serial.h (serial_copy_tty_state): Add prototype.
887 (struct serial_ops): Add copy_tty_state callback.
888 * ser-base.c (ser_base_copy_tty_state): New function.
889 * ser-base.h (ser_base_copy_tty_state): Add prototype.
890 * ser-go32.c (dos_copy_tty_state): New function.
891 (dos_ops): Install copy_tty_state callback.
892 * ser-mingw.c (_initialize_ser_windows): Likewise.
893 * ser-pipe.c (_initialize_ser_pipe): Likewise.
894 * ser-unix.c (hardwire_copy_tty_state): New function.
895 (_initialize_ser_hardwire): Install it.
897 2011-03-04 Michael Snyder <msnyder@vmware.com>
899 * breakpoint.c (create_breakpoint): Add missing break statement.
901 Reverting this patch:
902 * infcall.c (call_function_by_hand): Add break statements for lint.
904 Reverting this patch:
905 * cli/cli-script.c (script_from_file): Add break for lint.
907 2011-03-04 Michael Snyder <msnyder@vmware.com>
909 * solib.c (reload_shared_libraries_1): Close memory leak.
911 2011-03-03 Tom Tromey <tromey@redhat.com>
914 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
917 2011-03-03 Michael Snyder <msnyder@vmware.com>
919 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
920 fields of struct 'st' to zero.
922 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
923 sal.pspace before calling set_current_source_symtab_and_line.
925 2011-03-03 Yao Qi <yao@codesourcery.com>
927 * Makefile.in (configure-common): Remove. Let Makefile
928 in dir common to rebuild itself.
929 (common/Makefile): Likewise.
931 2011-03-03 Joel Brobecker <brobecker@adacore.com>
933 * utils.c (parse_escape): Add i18n markup in error message.
935 2011-03-03 Yao Qi <yao@codesourcery.com>
937 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
939 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
940 (displaced_write_reg, displaced_read_reg): Likewise.
941 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
942 (cleanup_block_load_pc, copy_block_xfer): Likewise.
943 (cleanup_branch): Replace magic number 14 and 15 with
944 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
946 2011-03-02 Michael Snyder <msnyder@vmware.com>
948 * maint.c (maintenance_do_deprecate): No need to check for NULL.
950 * cli/cli-script.c (script_from_file): Add break for lint.
952 * mdebugread.c (parse_partial_symbols): Fix indent.
954 * target-descriptions.c (tdesc_gdb_type): No need to call
955 xstrdup, callee saves a copy.
957 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
959 * infcall.c (call_function_by_hand): Add break statements for lint.
961 * utils.c (parse_escape): Escape the escape char.
963 * python/py-inferior.c (build_inferior_list): Error out if
965 (gdbpy_inferiors): Error out if build_inferior_list fails.
967 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
970 * record.c (record_restore): Move printf to before error return.
972 2011-03-02 Yao Qi <yao@codesourcery.com>
974 * arm-tdep.h (struct displaced_step_closure): Add two new fields
975 is_thumb and insn_size.
976 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
977 on both ARM and Thumb mode.
978 (arm_process_displaced_insn): Set is_thumb and insn_size.
979 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
980 (arm_displaced_step_fixup): Likewise.
982 2011-03-01 Michael Snyder <msnyder@vmware.com>
984 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
986 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
988 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
990 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
992 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
995 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
996 which shadows function parameter.
998 * tracepoint.c (create_tsv_from_upload): Superfluous call
999 to xstrdup. Callee already calls xstrdup.
1001 * linespec.c (decode_line_1): Remove unnecessary null check.
1003 * tracepoint.c (scope_info): Fix mem leak, remove underused
1006 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
1007 superfluous null check.
1009 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
1010 (value_of_builtin_frame_fp_reg): Ditto.
1012 * event-top.c (display_gdb_prompt): Remove superfluous null check.
1014 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
1017 * linespec.c (decode_line_1): Check for null before dereference.
1019 * reverse.c (record_restore): Move null-check to before pointer
1022 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
1024 * objc-lang.c (selectors_info): Add explanitory comment.
1025 (classes_info): Ditto.
1027 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
1029 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
1030 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
1031 versions of the trampoline. Handle Thumb vs. ARM addresses.
1032 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
1033 (arm_linux_init_abi): Install it.
1034 * arm-tdep.c (arm_psr_thumb_bit): Make global.
1035 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
1037 2011-02-28 Michael Snyder <msnyder@vmware.com>
1039 * ui-out.c (ui_out_field_core_addr): Make local char buffer
1040 a little bigger, to avoid possibility of an overflow.
1042 * breakpoint.c (breakpoint_adjustment_warning): Make local char
1043 buffers a little bigger, to avoid possibility of an overflow.
1045 * coffread.c (coff_getfilename): Add check to avoid overflow.
1047 * objc-lang.c (selectors_info): Add a small safety margin to
1049 (classes_info): Error out on too long REGEXP.
1051 * infrun.c (handle_inferior_event): Remove unused function call.
1053 * fork-child.c (fork_inferior): Remove ifdef'd code and
1056 * linux-thread-db.c (attach_thread): Discard unused value.
1058 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
1060 * remote.c (remote_get_noisy_reply): Discard unused value.
1061 (remote_vcont_resume): Ditto.
1062 (remote_stop_ns): Ditto.
1064 * linespec.c (decode_objc): Delete unused variable.
1066 * tui/tui-regs.c (tui_register_format): Delete unused variable.
1068 * dwarf2read.c (add_partial_symbol): Discard unused values.
1069 (read_base_type): Delete unused variable.
1071 * dbxread.c (read_dbx_symtab): Discard unused value.
1073 * eval.c (evaluate_subexp_standard): Delete unused variable,
1074 and discard unused values.
1076 * infcmd.c (_initialize_infcmd): Discard unused values.
1078 * stabsread.c (rs6000_builtin_type): Missing break statement.
1080 * dbxread.c (process_one_symbol): Discard unused value.
1082 * coffread.c (coff_end_symtab): Delete unused variable.
1084 * dwarf2read.c (dw2_get_file_names): Discard unused value.
1085 (dwarf2_add_typedef): Delete unused variable.
1086 (read_namespace): Ditto.
1087 (dwarf_decode_macros): Ditto.
1089 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
1091 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
1093 * p-valprint.c (pascal_val_print): Discard unused value.
1095 * utils.c (nquery): Call va_end before return;
1099 * proc-service.c (ps_plog): Call va_end before return.
1101 2011-02-28 Tom Tromey <tromey@redhat.com>
1103 * python/python.c (gdbpy_value_cst): New global.
1104 (_initialize_python): Initialize it.
1105 * python/python-internal.h (gdbpy_value_cst): Declare.
1106 * python/py-value.c (convert_value_from_python): Use
1109 2011-02-28 Michael Snyder <msnyder@vmware.com>
1111 * python/py-cmd.c (cmdpy_init): Fix memory leak.
1113 * breakpoint.c (catch_syscall_completer): Free malloced list.
1115 * jv-lang.c (java_primitive_type_from_name): Add missing break.
1117 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
1118 (lval_func_check_synthetic_pointer): Ditto.
1119 (lval_func_free_closure): Fix use-after-free.
1121 2011-02-28 Tom Tromey <tromey@redhat.com>
1123 * psymtab.c (expand_partial_symbol_tables): Use
1124 ALL_OBJFILE_PSYMTABS.
1126 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1128 * objc-lang.c (selectors_info): Error on too long REGEXP.
1130 2011-02-28 Michael Snyder <msnyder@vmware.com>
1132 * python/py-param.c (set_parameter_value): Add missing
1135 * linux-record.c (record_linux_system_call): Add missing
1138 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
1140 * breakpoint.c (print_one_breakpoint_location): Remove unused
1141 argument PRINT_ADDRESS_BITS. Update callers.
1142 (print_one_breakpoint): Likewise.
1144 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
1146 * breakpoint.c (wrap_indent_at_field): New function.
1147 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
1148 Allocate ui_stream locally instead of using STB argument.
1149 (print_one_breakpoint_location): Update call.
1150 * ui-out.c (ui_out_query_field): New function.
1151 * ui-out.h (ui_out_query_field): Add prototype.
1153 2011-02-28 Joel Brobecker <brobecker@adacore.com>
1155 From Michael Snyder <msnyder@vmware.com>
1156 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
1158 2011-02-27 Michael Snyder <msnyder@vmware.com>
1160 * objc-lang.c (selectors_info): Prevent string overrun.
1162 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
1165 * symtab.c (rbreak_command): Move variable 'file_name' to
1168 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
1169 param with a local variable of the same name.
1171 2011-02-27 Michael Snyder <msnyder@vmware.com>
1173 * value.c (value_from_history_ref): New function.
1174 * value.h (value_from_history_ref): Export.
1175 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
1176 to parse value history references.
1177 * cli/cli-utils.h (get_number_trailer): Update comment.
1179 2011-02-27 Michael Snyder <msnyder@vmware.com>
1181 * inferior.c (detach_inferior_command): Use get_number_or_range.
1182 (kill_inferior_command): Ditto.
1183 (remove_inferior_command): Ditto.
1184 (initialize_inferiors): Make command names plural.
1185 Update help strings.
1187 2011-02-27 Michael Snyder <msnyder@vmware.com>
1189 * darwin-nat-info.c: Fix comment typo.
1190 * dwarf2expr.h: Ditto.
1191 * fbsd-nat.c: Ditto.
1192 * fbsd-nat.h: Ditto.
1193 * frame-unwind.h: Ditto.
1195 * hppa-hpux-tdep.c: Ditto.
1196 * i386-linux-nat.c: Ditto.
1197 * linux-nat.c: Ditto.
1198 * nbsd-nat.c: Ditto.
1199 * nbsd-nat.h: Ditto.
1200 * ppc-linux-tdep.c: Ditto.
1203 * tui/tui-winsource.c: Ditto.
1205 2011-02-26 Michael Snyder <msnyder@vmware.com>
1207 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
1209 * maint.c (maintenance_do_deprecate): Plug a memory leak.
1211 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
1212 with a local variable of the same name.
1214 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
1215 param with a local variable of the same name.
1216 (i387_supply_xsave): Ditto.
1218 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
1219 that it does not shadow a function parameter.
1221 * i386-nat.c (i386_length_and_rw_bits): Document that case
1222 statement is meant to fall through.
1224 * expprint.c (dump_subexp_body_standard): Document that case
1225 statement is meant to fall through.
1227 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
1228 dead if statement. Condition can't be false.
1230 2011-02-25 Michael Snyder <msnyder@vmware.com>
1232 * arm-tdep.c: Fix typos in comments.
1233 * bsd-uthread.c: Ditto.
1234 * completer.c: Ditto.
1236 * cp-namespace.c: Ditto.
1237 * cp-support.c: Ditto.
1238 * cris-tdep.c: Ditto.
1240 * dwarf2read.c: Ditto.
1242 * gdbtypes.h: Ditto.
1243 * inferior.h: Ditto.
1244 * mdebugread.c: Ditto.
1245 * mips-tdep.c: Ditto.
1246 * ppc-linux-nat.c: Ditto.
1247 * ppc-linux-tdep.c: Ditto.
1248 * printcmd.c: Ditto.
1249 * sol-thread.c: Ditto.
1250 * solib-frv.c: Ditto.
1252 * sparc64-tdep.c: Ditto.
1253 * spu-tdep.c: Ditto.
1254 * stabsread.c: Ditto.
1259 * python/py-block.c: Ditto.
1260 * python/py-symbol.c: Ditto.
1261 * python/py-symtab.c: Ditto.
1262 * python/py-value.c: Ditto.
1263 * tui/tui-win.c: Ditto.
1265 2011-02-25 Michael Snyder <msnyder@vmware.com>
1267 * inferior.c (print_inferior): Accept a string instead of an int
1268 for requested_inferiors, and use get_number_or_range to parse it.
1269 (info_inferiors_command): Pass args string to print_inferior.
1270 (initialize_inferiors): Change help string for info inferiors.
1271 * inferior.h (print_inferior): Export prototype change.
1273 2011-02-25 Tom Tromey <tromey@redhat.com>
1275 * common/ax.def (invalid2): Set to 0x31.
1277 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1279 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
1281 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
1283 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
1285 2011-02-24 Michael Snyder <msnyder@vmware.com>
1287 * Makefile.in (clean): Make clean should remove generated files
1288 observer.h and observer.inc.
1290 2011-02-24 Joel Brobecker <brobecker@adacore.com>
1292 Revert the following patch (not approved yet):
1293 2011-02-21 Hui Zhu <teawater@gmail.com>
1294 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
1295 * ax-gdb.c (gen_printf_expr_callback): New function.
1296 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
1297 * ax-general.c (ax_memcpy): New function.
1298 (ax_print): Handle "printf".
1300 * ax.h (ax_memcpy): Forward declare.
1301 * common/ax.def (invalid2): Removed.
1302 (printf): New entry.
1303 * printcmd.c (printcmd.h): New include.
1304 (string_printf): New function.
1305 (ui_printf): Removed.
1306 (printf_command): Remove static. Call string_printf.
1307 (eval_command): Call string_printf.
1308 * printcmd.h: New file.
1309 * tracepoint.c (validate_actionline,
1310 encode_actions_1): handle printf_command.
1312 2011-02-23 Tom Tromey <tromey@redhat.com>
1314 * ax-general.c (ax_pick): Add missing newline.
1316 2011-02-23 Michael Snyder <msnyder@vmware.com>
1318 * breakpoint.c (breakpoint_1): Change first argument from an int
1319 to a char pointer, so that the function now accepts a list of
1320 breakpoints rather than just one. Use new function
1321 'number_is_in_list' to implement.
1322 (breakpoints_info): Pass char * instead of int to breakpoint_1.
1323 (watchpoints_info): Ditto.
1324 (tracepoints_info): Ditto.
1325 (maintenance_info_breakpoints): Ditto.
1326 (_initialize_breakpoint): Update help strings to reflect the fact
1327 that these functions can now take more than one argument.
1328 * cli/cli-utils.c (number_is_in_list): New function.
1329 * cli/cli-utils.h (number_is_in_list): Export.
1331 2011-02-23 Michael Snyder <msnyder@vmware.com>
1333 * memattr.c (mem_enable_command): Use get_number_or_range.
1334 (mem_disable_command): Ditto.
1335 (mem_delete_command): Ditto.
1336 (_initialize_mem): Tweak usage message to reflect multiple
1339 2011-02-22 Doug Evans <dje@google.com>
1341 Add gdb.lookup_global_symbol python function.
1343 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
1344 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
1345 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
1347 2011-02-22 Tom Tromey <tromey@redhat.com>
1349 * language.c (language_class_name_from_physname): Rename
1350 'curr_language' argument to 'lang'; use in body.
1352 2011-02-22 Michael Snyder <msnyder@vmware.com>
1354 * cli/cli-utils.c (number_is_in_list): Check for zero return.
1356 2011-02-22 Pedro Alves <pedro@codesourcery.com>
1358 * frame-unwind.h: Fix comment to mention the this frame, not the
1361 2011-02-22 Tom Tromey <tromey@redhat.com>
1363 * symfile.c (auto_solib_limit): Remove.
1364 * symfile.h (auto_solib_limit): Remove.
1366 2011-02-22 Joel Brobecker <brobecker@adacore.com>
1368 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
1370 2011-02-21 Michael Snyder <msnyder@vmware.com>
1372 * gdbthread.h (print_thread_info): Change prototype.
1373 * thread.c (print_thread_info): Accept char* instead of int for
1374 requested_threads argument. Use new function number_is_in_list
1375 to determine which threads to list.
1376 (info_threads_command): Pass char* to print_thread_info.
1377 * cli/cli-utils.c (number_is_in_list): New function.
1378 * cli/cli-utils.h (number_is_in_list): Export.
1379 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
1381 (print_one_inferior): Ditto.
1382 (mi_cmd_list_thread_groups): Ditto.
1384 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1386 * common/Makefile.in (CFLAGS): New.
1387 (COMPILE): Add $(CFLAGS).
1389 2011-02-21 Tom Tromey <tromey@redhat.com>
1391 * breakpoint.c (catch_syscall_command_1): Fix typo.
1393 2011-02-21 Tom Tromey <tromey@redhat.com>
1395 * reverse.c: Include cli-utils.h.
1396 * printcmd.c: Include cli-utils.h.
1397 (string_printf): Use skip_spaces.
1398 * cli/cli-utils.h: New file.
1399 * cli/cli-utils.c: New file.
1400 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
1401 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
1402 * breakpoint.h (get_number, get_number_or_range): Move to
1404 * breakpoint.c: Include cli-utils.h.
1405 (get_number_trailer, get_number, get_number_or_range)
1406 (ep_skip_leading_whitespace): Move to cli-utils.c.
1407 (create_breakpoint_sal, find_condition_and_thread)
1408 (decode_static_tracepoint_spec, watch_command_1)
1409 (watch_maybe_just_location, ep_parse_optional_if_clause)
1410 (catch_fork_command_1, catch_exec_command_1)
1411 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
1412 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
1413 (SUBDIR_CLI_SRCS): Add cli-utils.c.
1414 (HFILES_NO_SRCDIR): Add cli-utils.h.
1415 (cli-utils.o): New target.
1417 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1419 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
1420 before calling discard_all_inferiors.
1422 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1424 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
1425 (struct builtin_opencl_type): Remove.
1426 (builtin_opencl_type): Change return type to "struct type **".
1427 (lookup_opencl_vector_type): Update caller.
1428 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
1429 (build_opencl_types): Install plain array of "struct type *"
1430 instead of "struct builtin_opencl_type".
1432 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1433 Ulrich Weigand <uweigand@de.ibm.com>
1435 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
1436 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
1437 (struct arm_linux_hwbp_cap): New type.
1438 (arm_linux_get_hwbp_cap): New function.
1439 (arm_linux_get_hw_breakpoint_count): Likewise.
1440 (arm_linux_get_hw_watchpoint_count): Likewise.
1441 (arm_linux_can_use_hw_breakpoint): Likewise.
1442 (arm_hwbp_type): New type.
1443 (arm_hwbp_control_t): Likewise.
1444 (struct arm_linux_hw_breakpoint): Likewise.
1445 (struct arm_linux_thread_points): Likewise.
1446 (arm_threads): New global variable.
1447 (arm_linux_find_breakpoints_by_tid): New function.
1448 (arm_hwbp_control_initialize): Likewise.
1449 (arm_hwbp_control_is_enabled): Likewise.
1450 (arm_hwbp_control_disable): Likewise.
1451 (arm_linux_hw_breakpoint_initialize): Likewise.
1452 (arm_linux_get_hwbp_type): Likewise.
1453 (arm_linux_hw_watchpoint_initialize): Likewise.
1454 (arm_linux_hw_breakpoint_equal): Likewise.
1455 (arm_linux_insert_hw_breakpoint1): Likewise.
1456 (arm_linux_remove_hw_breakpoint1): Likewise.
1457 (arm_linux_insert_hw_breakpoint): Likewise.
1458 (arm_linux_remove_hw_breakpoint): Likewise.
1459 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
1460 (arm_linux_insert_watchpoint): Likewise.
1461 (arm_linux_remove_watchpoint): Likewise.
1462 (arm_linux_stopped_data_address): Likewise.
1463 (arm_linux_stopped_by_watchpoint): Likewise.
1464 (arm_linux_watchpoint_addr_within_range): Likewise.
1465 (arm_linux_new_thread): Likewise.
1466 (arm_linux_thread_exit): Likewise.
1467 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
1468 related target callbacks. Register arm_linux_new_thread and
1469 arm_linux_thread_exit.
1470 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
1471 * arm-tdep.c (arm_pc_is_thumb): Make global.
1472 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
1474 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1476 * breakpoint.c (update_watchpoint): Do not attempt to recreate
1477 per-frame locations while within a function epilogue.
1479 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1481 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
1482 to GNU coding standards.
1484 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1486 Allow use of mingw native on Windows 95 OS.
1487 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
1488 (ser_windows_close): Only call CancelIo if function exists.
1489 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
1490 to check for existence of CancelIo function in kernel32 DLL.
1492 2011-02-21 Hui Zhu <teawater@gmail.com>
1494 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
1495 * ax-gdb.c (gen_printf_expr_callback): New function.
1496 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
1497 * ax-general.c (ax_memcpy): New function.
1498 (ax_print): Handle "printf".
1500 * ax.h (ax_memcpy): Forward declare.
1501 * common/ax.def (invalid2): Removed.
1502 (printf): New entry.
1503 * printcmd.c (printcmd.h): New include.
1504 (string_printf): New function.
1505 (ui_printf): Removed.
1506 (printf_command): Remove static. Call string_printf.
1507 (eval_command): Call string_printf.
1508 * printcmd.h: New file.
1509 * tracepoint.c (validate_actionline,
1510 encode_actions_1): handle printf_command.
1512 2011-02-19 Michael Snyder <msnyder@vmware.com>
1514 * reverse.c (delete_one_bookmark): Argument is now bookmark
1515 id rather than pointer to bookmark struct.
1516 (delete_bookmark_command): Use get_number_or_range.
1517 (goto_bookmark_command): Parse with get_number instead of strtoul.
1518 (bookmark_1): New function. Print info for one bookmark.
1519 (bookmarks_info): Use get_number_or_range and bookmark_1.
1521 2011-02-18 Michael Snyder <msnyder@vmware.com>
1523 * thread.c (info_threads_command): Re-implement using
1524 get_number_or_range.
1525 (thread_apply_command): Ditto.
1527 2011-02-18 Tom Tromey <tromey@redhat.com>
1529 * common/ax.def: New file.
1530 * ax.h (enum agent_op): Use ax.def.
1531 * ax-general.c (aop_map): Use ax.def.
1533 2011-02-18 Tom Tromey <tromey@redhat.com>
1535 * ax-general.c (aop_map): Add pick and rot.
1536 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
1537 <DW_OP_rot>: Implement.
1538 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
1540 * ax-general.c (ax_pick): New function.
1542 2011-02-18 Tom Tromey <tromey@redhat.com>
1544 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
1546 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
1547 Tom Tromey <tromey@redhat.com>
1549 * cp-support.c (make_symbol_overload_list_namespace): Do not call
1550 make_symbol_overload_list_block with NULL BLOCK.
1551 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
1553 2011-02-18 Pedro Alves <pedro@codesourcery.com>
1555 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
1556 * breakpoint.h (get_number_or_range): Declare.
1557 * printcmd.c (ALL_DISPLAYS): Declare.
1558 (delete_display): Reimplement taking a display pointer.
1559 (undisplay_command): Accept a range of displays to delete, using
1560 get_number_or_range.
1562 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1564 * c-valprint.c (c_val_print): Add embedded_offset to address
1565 for arrays of unspecified length.
1566 * p-valprint.c (pascal_val_print): Likewise.
1568 2011-02-18 Yao Qi <yao@codesourcery.com>
1570 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
1571 (arm_process_displaced_insn): .. here. Remove parameter INSN.
1572 (thumb_process_displaced_insn): New.
1573 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
1574 call to arm_process_displaced_insn.
1575 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
1577 2011-02-17 Tom Tromey <tromey@redhat.com>
1579 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
1580 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
1581 compile_dwarf_to_ax. No longer static. Call
1582 dwarf2_compile_cfa_to_ax.
1583 (locexpr_tracepoint_var_ref): Update.
1584 (loclist_tracepoint_var_ref): Update.
1585 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
1586 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
1587 argument; add 'gdbarch' and 'pc'.
1588 (dwarf2_compile_cfa_to_ax): New function.
1589 (dwarf2_frame_cache): Update.
1591 2011-02-17 Joel Brobecker <brobecker@adacore.com>
1593 * ada-lang.c (ada_type_of_array): Fix the size of the array
1594 in the case of an unconstrained packed array.
1596 2011-02-17 Yao Qi <yao@codesourcery.com>
1598 * common/Makefile.in: Add more targets for make.
1600 2011-02-16 Tom Tromey <tromey@redhat.com>
1602 * dwarf2loc.c (unimplemented): Fix typo.
1604 2011-02-16 Tom Tromey <tromey@redhat.com>
1606 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
1607 (compile_dwarf_to_ax) <default>: Use unimplemented.
1608 <DW_OP_deref>: Update.
1609 (disassemble_dwarf_expression): Update.
1610 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
1611 (decode_locdesc): Update.
1612 * dwarf2expr.h (dwarf_stack_op_name): Update.
1614 2011-02-16 Tom Tromey <tromey@redhat.com>
1616 * ax.h (struct aop_map) <name>: Now const.
1618 2011-02-16 Tom Tromey <tromey@redhat.com>
1620 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
1623 2011-02-16 Yao Qi <yao@codesourcery.com>
1625 * infrun.c (get_displaced_step_closure_by_addr): New.
1626 * inferior.h: Declare it.
1627 * arm-tdep.c: (arm_pc_is_thumb): Call
1628 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
1631 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1632 Jan Kratochvil <jan.kratochvil@redhat.com>
1635 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
1637 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1638 Jan Kratochvil <jan.kratochvil@redhat.com>
1640 * value.c (value_contents_copy_raw): Extend describing comment.
1641 Assert that the destination contents we're overwriting are wholly
1643 (value_contents_copy): Extend describing comment.
1645 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1646 Jan Kratochvil <jan.kratochvil@redhat.com>
1648 * value.c (value_available_contents_eq): Remove redundant local
1649 variables. Fix available contents comparision.
1650 * value.h (value_available_contents_eq): Extend describing
1653 2011-02-16 Yao Qi <yao@codesourcery.com>
1655 * thread.c (info_threads_command): Add missing i18n markup and remove
1658 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1660 * breakpoint.c (longjmp_names): New variable.
1661 (struct breakpoint_objfile_data): New type.
1662 (breakpoint_objfile_key): New variable.
1663 (msym_not_found): New variable.
1664 (msym_not_found_p): New predicate.
1665 (get_breakpoint_objfile_data): New function.
1666 (create_overlay_event_breakpoint): Check per-objfile cache for
1668 (create_longjmp_master_breakpoint): Likewise.
1669 (create_std_terminate_master_breakpoint): Likewise.
1670 (create_exception_master_breakpoint): Likewise.
1671 (_initialize_breakpoint): Register per-objfile data key.
1673 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1675 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
1677 (create_longjmp_master_breakpoint): Loop over longjmp names.
1678 (create_std_terminate_master_breakpoint): Const-propagate parameter
1680 (update_breakpoints_after_exec): Adjust.
1681 (breakpoint_re_set): Adjust.
1683 2011-02-15 Michael Snyder <msnyder@vmware.com>
1685 * thread.c (info_threads_command): Process arg as thread id,
1686 or list of thread ids.
1687 (thread_find_command): New command.
1688 (_initialize_thread): Document argument for info threads.
1689 Document 'thread find' command.
1690 * NEWS: Document new command "thread find".
1692 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1694 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
1695 * aclocal.m4: Regenerated with aclocal-1.11.1.
1696 * common/configure: Regenerate with autoconf-2.64.
1698 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
1700 * opencl-lang.c (build_opencl_types): Set the size of the built-in
1701 bool data type to a size of one byte.
1703 2011-02-15 Pedro Alves <pedro@codesourcery.com>
1704 Jan Kratochvil <jan.kratochvil@redhat.com>
1706 * target.c (memory_xfer_live_readonly_partial): Document where to
1707 look for interface description.
1709 2011-02-15 Yao Qi <yao@codesourcery.com>
1712 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
1713 order to store PC value on stack instead of text section.
1715 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
1717 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
1718 the EFP register set size.
1719 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
1720 data from the VMX register.
1721 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
1722 and write data from/to the VMX register.
1724 2011-02-14 Michael Snyder <msnyder@vmware.com>
1726 * command.h (enum command_class): New class 'no_set_class', for
1727 "show" commands without a corresponding "set" command.
1728 * value.c (_initialize_values): Use 'no_set_class' for "show values".
1729 * copying.c (_initialize_copying): Ditto for "show copying" and
1731 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
1733 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
1734 which there is no corresponding "set" command (eg. "show copying").
1736 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1737 Jan Kratochvil <jan.kratochvil@redhat.com>
1739 * exec.c (section_table_available_memory): Change `len' parameter
1741 * exec.h (section_table_available_memory): Ditto.
1742 * value.h (read_value_memory): Rename the `offset' parameter to
1745 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1746 Jan Kratochvil <jan.kratochvil@redhat.com>
1748 * memrange.c (compare_mem_ranges): Mention sort order in
1750 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
1751 * tracepoint.c (traceframe_available_memory): Extend comment to
1752 mention what happens to RESULT when the target does not support
1755 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1756 Jan Kratochvil <jan.kratochvil@redhat.com>
1758 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
1761 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1763 * value.c (value_bits_valid, value_bits_synthetic_pointer):
1764 No longer handle NULL values.
1766 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1768 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
1769 * value.c: Include "exceptions.h".
1770 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
1772 * cp-abi.c: Include gdb_assert.h.
1773 (baseclass_offset): Add `embedded_offset' and `val' parameters.
1774 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
1776 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
1777 parameters. No longer returns -1 on error.
1778 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
1780 * cp-valprint.c: Include exceptions.h.
1781 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
1782 the baseclass_offset. Handle unavailable base classes. Use
1783 val_print_invalid_address.
1784 * p-valprint.c: Include exceptions.h.
1785 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
1786 when fetching the baseclass_offset. No longer expect
1787 baseclass_offset returning -1. Handle unavailable base classes.
1788 Use val_print_invalid_address.
1789 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
1790 `valaddr' parameter, and change its type to gdb_byte pointer. Add
1791 `embedded_offset' and `val' parameters. Adjust.
1792 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
1793 parameter, and change its type to gdb_byte pointer. Add
1794 `embedded_offset' and `val' parameters. Adjust. No longer expect
1795 baseclass_offset returning -1.
1796 (value_dynamic_cast): Use value_contents_for_printing rather than
1797 value_contents. Adjust.
1798 (search_struct_field): No longer expect baseclass_offset returning
1800 (search_struct_method): If reading memory from the target is
1801 necessary, wrap it in a new value to pass to baseclass_offset. No
1802 longer expect baseclass_offset returning -1.
1803 (find_method_list): No longer expect baseclass_offset returning
1804 -1. Use value_contents_for_printing rather than value_contents.
1805 * valprint.c (val_print_invalid_address): New function.
1806 * valprint.h (val_print_invalid_address): Declare.
1807 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
1808 and `val' parameters. No longer expect baseclass_offset returning
1810 * gnu-v2-abi.c: Include "exceptions.h".
1811 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
1812 parameters. Handle unavailable memory. Recurse through
1813 gnuv2_baseclass_offset directly, rather than through
1814 baseclass_offset. No longer returns -1 on not found, instead
1816 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
1817 `val' parameters. Adjust.
1819 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1821 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
1822 almost but not quite adjacent.
1824 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1826 * value.h (value_entirely_available): Declare.
1827 * value.c (value_entirely_available): New function.
1828 * c-valprint.c (c_value_print): Don't try fetching the pointer's
1829 real type if the pointer is unavailable.
1831 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1833 * valops.c (value_repeat): Use read_value_memory instead of
1836 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1838 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
1839 * value.c (value_contents_copy_raw, value_contents_copy): New
1841 (value_primitive_field): Use value_contents_copy_raw instead of
1843 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
1845 (value_array, value_slice): Ditto.
1846 * valarith.c (value_subscripted_rvalue): Use
1847 value_contents_copy_raw instead of memcpy.
1849 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1851 <unavailable> references.
1853 * valops.c (get_value_at): Use value_from_contents_and_address,
1854 avoiding read_memory.
1856 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1858 * c-valprint.c (c_val_print): Print a string with unavailable
1859 contents as an array.
1861 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1863 * value.h (unpack_bits_as_long): Delete declaration.
1864 (unpack_value_bits_as_long): Declare.
1865 (unpack_value_field_as_long): Declare.
1866 (value_field_bitfield): Declare.
1867 * value.c (unpack_bits_as_long): Rename to...
1868 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
1869 value parameters. Return the extracted result in a new output
1870 parameter. If the value contents are unavailable, return false,
1871 otherwise return true.
1872 (unpack_value_bits_as_long): New.
1873 (unpack_field_as_long): Rename to...
1874 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
1875 Add embedded_offset and value parameters. Return the extracted
1876 result in a new output parameter. If the value contents are
1877 unavailable, return false, otherwise return true.
1878 (unpack_value_field_as_long): New.
1879 (unpack_field_as_long_1): New.
1880 (unpack_field_as_long): Reimplement as wrapper around
1881 unpack_value_field_as_long_1.
1882 (value_field_bitfield): New function.
1883 * valops.c (value_fetch_lazy): When fetching a bitfield, use
1884 unpack_value_bits_as_long. Mark the value as unavailable, if it
1886 * jv-valprint.c (java_print_value_fields): Use
1887 value_field_bitfield.
1888 * p-valprint.c (pascal_object_print_value_fields): Use
1889 value_field_bitfield.
1890 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
1892 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1894 * value.c (get_internalvar_integer): Also return the int value of
1895 TYPE_CODE_INT INTERNALVAR_VALUE values.
1896 (set_internalvar): Don't special case TYPE_CODE_INT.
1898 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1900 * value.c (struct internalvar) <enum internalvar_kind>: Remove
1901 INTERNALVAR_POINTER.
1903 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
1904 (set_internalvar): Remove special TYPE_CODE_PTR handling.
1905 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
1907 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1909 * value.h (value_available_contents_eq): Declare.
1910 * value.c (find_first_range_overlap): New function.
1911 (value_available_contents_eq): New function.
1912 * valprint.c (val_print_array_elements): Use
1913 value_available_contents_eq.
1914 * ada-valprint.c (val_print_packed_array_elements): Use
1915 value_available_contents_eq.
1916 * jv-valprint.c (java_value_print): Use
1917 value_available_contents_eq.
1919 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1921 * target.c (target_read_live_memory): New function.
1922 (memory_xfer_live_readonly_partial): New.
1923 (memory_xfer_partial): If reading from a traceframe, fallback to
1924 reading unavailable read-only memory from read-only regions of
1926 * tracepoint.c (disconnect_tracing): Adjust.
1927 (set_current_traceframe): New, factored out from
1928 set_traceframe_number.
1929 (set_traceframe_number): Reimplement to only change the traceframe
1930 number on the GDB side.
1931 (do_restore_current_traceframe_cleanup): Adjust.
1932 (make_cleanup_restore_traceframe_number): New.
1933 (cur_traceframe_number): New global.
1934 (tfile_open): Set cur_traceframe_number to no traceframe.
1935 (set_tfile_traceframe): New function.
1936 (tfile_trace_find): If looking up a traceframe using any method
1937 other than by number, make sure the current tfile traceframe
1938 matches gdb's current traceframe. Update the current tfile
1939 traceframe if the lookup succeeded.
1940 (tfile_fetch_registers, tfile_xfer_partial)
1941 (tfile_get_trace_state_variable_value): Make sure the remote
1942 traceframe matches gdb's current traceframe.
1943 * remote.c (remote_traceframe_number): New global.
1944 (remote_open_1): Set it to -1.
1945 (set_remote_traceframe): New function.
1946 (remote_fetch_registers, remote_store_registers)
1947 (remote_xfer_memory, remote_xfer_partial)
1948 (remote_get_trace_state_variable_value): Make sure the remote
1949 traceframe matches gdb's current traceframe.
1950 (remote_trace_find): If looking up a traceframe using any method
1951 other than by number, make sure the current remote traceframe
1952 matches gdb's current traceframe. Update the current remote
1953 traceframe if the lookup succeeded.
1954 * infrun.c (fetch_inferior_event): Adjust.
1955 * tracepoint.h (set_current_traceframe): Declare.
1956 (get_traceframe_number, set_traceframe_number): Add describing
1959 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1961 Mark pieces of values as unavailable if the corresponding memory
1964 * valops.c: Include tracepoint.h.
1965 (value_fetch_lazy): Use read_value_memory.
1966 (read_value_memory): New.
1967 * value.h (read_value_memory): Declare.
1968 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
1969 * exec.c (section_table_available_memory): New function.
1970 * exec.h (section_table_available_memory): Declare.
1972 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1974 * Makefile.in (SFILES): Add memrange.c.
1975 (HFILES_NO_SRCDIR): Add memrange.h.
1976 (COMMON_OBS): Add memrange.o.
1977 * memrange.c: New file.
1978 * memrange.h: New file.
1979 * tracepoint.c: Include memrange.h.
1980 (struct mem_range): Delete.
1981 (mem_range_s): Delete.
1982 (traceframe_available_memory): New function.
1983 * tracepoint.h (traceframe_available_memory): Declare.
1985 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1987 * target.h (struct traceframe_info): Forward declare.
1988 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
1989 (struct target_ops) <to_traceframe_info>: New field.
1990 (target_traceframe_info): New.
1991 * target.c (update_current_target): Inherit and default
1993 * remote.c (PACKET_qXfer_traceframe_info): New.
1994 (remote_protocol_features): Register qXfer:traceframe-info:read.
1995 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
1996 (remote_traceframe_info): New.
1997 (init_remote_ops): Install it.
1998 (_initialize_remote): Install "set/show remote traceframe-info"
2000 * tracepoint.h (parse_traceframe_info): Declare.
2001 * tracepoint.c (struct mem_range): New.
2002 (mem_range_s): New typedef.
2003 (struct traceframe_info): New.
2004 (traceframe_info): New global.
2005 (free_traceframe_info): New function.
2006 (clear_traceframe_info): New function.
2007 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
2009 (build_traceframe_info): New function.
2010 (tfile_traceframe_info): New function.
2011 (init_tfile_ops): Install tfile_traceframe_info.
2012 (traceframe_info_start_memory, free_result): New functions.
2013 (memory_attributes, traceframe_info_elements): New globals.
2014 (parse_traceframe_info, get_traceframe_info): New functions.
2015 * features/traceframe-info.dtd: New file.
2016 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
2018 2011-02-14 Pedro Alves <pedro@codesourcery.com>
2020 Base support for <unavailable> value contents.
2022 * value.h (value_bytes_available): Declare.
2023 (mark_value_bytes_unavailable): Declare.
2024 * value.c (struct range): New struct.
2025 (range_s): New typedef.
2026 (ranges_overlap): New function.
2027 (range_lessthan): New function.
2028 (ranges_contain_p): New function.
2029 (struct value) <unavailable>: New field.
2030 (value_bytes_available): New function.
2031 (mark_value_bytes_unavailable): New function.
2032 (require_not_optimized_out): Constify parameter.
2033 (require_available): New function.
2034 (value_contents_all, value_contents): Require all bytes be
2036 (value_free): Free `unavailable'.
2037 (value_copy): Copy `unavailable'.
2038 * valprint.h (val_print_unavailable): Declare.
2039 * valprint.c (valprint_check_validity): Rename `offset' parameter
2040 to `embedded_offset'. If printing a scalar, check whether the
2041 value chunk is available.
2042 (val_print_unavailable): New.
2043 (val_print_scalar_formatted): Check whether the value is
2045 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
2046 pretty-printing unavailable values.
2048 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2050 Fix const/volatile qualifiers of C++ types, PR c++/12328.
2051 * c-typeprint.c (c_type_print_args): Update the function comment. New
2052 variable param_type, initialize it. Remove const/volatile qualifiers
2053 for language_cplus and !show_artificial. Use param_type.
2055 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2057 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
2058 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
2059 * symtab.h (struct symtab) <next>: Comment extension.
2061 2011-02-12 Yao Qi <yao@codesourcery.com>
2063 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
2065 2011-02-11 Yao Qi <yao@codesourcery.com>
2067 * common/Makefile.in: Add copyright header.
2069 2011-02-11 Pedro Alves <pedro@codesourcery.com>
2071 * infrun.c (proceed): Move switching out and in of tfind mode from
2073 (fetch_inferior_event): ... to here.
2075 2011-02-11 Yao Qi <yao@codesourcery.com>
2077 * Makefile.in: Remove signals.o from COMMON_OBS. Link
2079 * configure.ac: Add common to sub dir.
2080 * configure: Regenerate.
2082 2011-02-11 Yao Qi <yao@codesourcery.com>
2086 * common/Makefile.in: New.
2087 * common/configure.ac: New.
2088 * common/aclocal.m4: New.
2089 * common/configure: Generate.
2091 2011-02-10 Pedro Alves <pedro@codesourcery.com>
2093 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
2094 side of the parenthesis.
2097 2010-07-13 Jakub Jelinek <jakub@redhat.com>
2098 * vec.h (VEC_block_remove): Fix comment.
2100 2011-02-08 Michael Snyder <msnyder@vmware.com>
2102 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
2104 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2106 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
2107 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
2110 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2113 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
2115 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
2116 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
2118 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
2120 * dwarf2read.c (read_subroutine_type): Set special calling
2121 convention flag for functions compiled by IBM XL C for OpenCL.
2122 * ppc-sysv-tdep.c: Include "dwarf2.h"
2123 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
2125 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
2126 IBM OpenCL vector types calling convention.
2127 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
2128 (ppc_sysv_abi_broken_return_value): Likewise.
2129 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
2130 types calling convention.
2131 (ppc64_sysv_abi_return_value): Likewise.
2132 * spu-tdep.c: Include "dwarf2.h"
2133 (spu_return_value): Implement IBM OpenCL vector types calling
2136 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
2138 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
2139 correct ABI for AltiVec vector arguments.
2141 2011-02-07 Pedro Alves <pedro@codesourcery.com>
2143 * valprint.c (val_print): Extend comment.
2144 * ada-valprint.c (ada_valprint): Rewrite comment deferring
2145 interface explanation to val_print.
2146 (ada_val_print_array): Adjust comment to current interface.
2147 (print_field_values): Adjust comment to current interface.
2148 * c-valprint.c (c_val_print): Rewrite comment deferring interface
2149 explanation to val_print.
2150 * f-valprint.c (f_val_print): Ditto.
2151 * jv-valprint.c (java_val_print): Ditto.
2152 * m2-valprint.c (m2_val_print): Ditto.
2153 * p-valprint.c (pascal_val_print): Ditto.
2155 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
2157 * breakpoint.c (parse_breakpoint_sals): Fix description.
2159 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
2160 Oguz Kayral <oguzkayral@gmail.com>
2162 * python/py-inferior.c (python_on_normal_stop): New function.
2163 (python_on_resume): New function.
2164 (python_inferior_exit): New function.
2165 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
2166 inferior_exit observers.
2167 * python/py-evtregistry.c: New file.
2168 * python/py-threadevent.c : New file.
2169 * python/py-event.c: New file.
2170 * python/py-evts.c: New file.
2171 * python/py-continueevent.c: New file.
2172 * python/py-bpevent.c: New file.
2173 * python/py-signalevent.c: New file.
2174 * python/py-exetiedevent.c: New file.
2175 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
2176 Move struct breakpoint_object from here...
2177 * python/python-internal.h: ... to here.
2178 * python/py-event.h: New file.
2179 * python/py-events.h: New file.
2180 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
2181 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
2182 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
2183 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
2184 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
2185 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
2186 Add build rules for all the above.
2188 2011-02-04 Tom Tromey <tromey@redhat.com>
2190 * dwarf2read.c (dwarf2_section_empty_p): New function.
2191 (dwarf2_read_section): Use dwarf2_section_empty_p.
2192 (dwarf2_section_size): New function.
2193 (dwarf2_get_section_info): Unconditionally read section.
2194 (dwarf2_read_index): Use dwarf2_section_empty_p.
2195 (partial_read_comp_unit_head): Use dwarf2_section_size.
2196 (dwarf2_symbol_mark_computed): Likewise.
2198 2011-02-04 David Daney <ddaney@caviumnetworks.com>
2200 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
2202 2011-02-04 David Daney <ddaney@caviumnetworks.com>
2204 * mips-linux-tdep.c: Include xml-syscall.h.
2205 (mips_linux_get_syscall_number): New function.
2206 (mips_linux_init_abi): Add calls to
2207 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
2208 * data-directory/Makefile.in (SYSCALLS_FILES): Add
2209 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
2210 * syscalls/mips-n32-linux.xml: New file.
2211 * syscalls/mips-n64-linux.xml: New file.
2212 * syscalls/mips-o32-linux.xml: New file.
2214 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
2216 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
2217 Complain about inverted range entries.
2218 (dwarf2_record_block_ranges): Likewise.
2220 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
2223 * breakpoint.c (update_watchpoint): Fix name of the
2224 update_global_location_list function.
2225 (print_one_breakpoint): Fix typo.
2226 (_initialize_breakpoint): Remove extra space in hbreak help
2228 * breakpoint.h (struct bp_location) <length>: Fix field
2231 2011-02-04 Pedro Alves <pedro@codesourcery.com>
2233 * regcache.c (registers_changed_ptid): Don't explictly always
2234 clear `current_regcache'. Only clear current_thread_ptid and
2235 current_thread_arch when PTID matches. Only reinit the frame
2236 cache if PTID matches the current inferior_ptid. Move alloca(0)
2238 (registers_changed): ... here.
2240 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
2242 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
2243 starts with __stack_chk_guard as stack guard symbol.
2245 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
2247 * disasm.c (compare_lines): Handle the end of sequence markers
2248 within the line table to better support disassembling over
2249 compilation unit boundaries.
2251 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
2253 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
2254 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
2255 implementation even if no symbols are available.
2256 (thumb_analyze_prologue): Update call to skip_prologue_function.
2257 (arm_analyze_prologue): Likewise.
2259 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
2261 * arm-tdep.c: Include "observer.h".
2262 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
2263 (arm_exidx_data_key): New static variable.
2264 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
2265 (struct arm_exidx_data): Likewise.
2266 (arm_exidx_data_free): New function.
2267 (arm_compare_exidx_entries): Likewise.
2268 (arm_obj_section_from_vma): Likewise.
2269 (arm_exidx_new_objfile): Likewise.
2270 (arm_find_exidx_entry): Likewise.
2271 (arm_exidx_fill_cache): Likewise.
2272 (arm_exidx_unwind_sniffer): Likewise.
2273 (arm_exidx_unwind): New global variable.
2274 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
2275 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
2276 observer. Register arm_exidx_data_key as objfile data.
2278 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
2280 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
2281 due to accessing uninitialized variable. Fix indentation.
2283 2011-02-02 Pedro Alves <pedro@codesourcery.com>
2285 * c-valprint.c (c_value_print): When doing virtual base pointer
2286 adjustment, create a new value with adjusted contents rather than
2287 changing the contents of the value being printed (and getting it
2290 2011-02-02 Pedro Alves <pedro@codesourcery.com>
2292 * xml-support.c (xml_find_attribute): New.
2293 (xinclude_start_include): Use it.
2294 * xml-support.h (xml_find_attribute): Declare.
2295 * memory-map.c (memory_map_start_memory)
2296 (memory_map_start_property): Use xml_find_attribute.
2297 * osdata.c (osdata_start_osdata, osdata_start_column): Use
2299 * remote.c (start_thread): Use xml_find_attribute.
2300 * solib-target.c (library_list_start_segment)
2301 (library_list_start_section, library_list_start_library)
2302 (library_list_start_list): Use xml_find_attribute.
2303 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
2304 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
2305 (tdesc_start_field): Use xml_find_attribute.
2307 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
2309 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
2310 (BUILD_OCL_VTYPES): Update.
2312 2011-02-02 Joel Brobecker <brobecker@adacore.com>
2314 * configure.ac: Work around non-GNU sed limitation when computing
2315 python version number.
2316 * configure: Regenerate.
2318 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2320 Fix debug printing of TYPE_INSTANCE.
2321 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
2322 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
2324 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2326 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
2327 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
2328 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
2329 * ada-operator.inc: Rename the file to ...
2330 * ada-operator.def: ... here, wrap all the entries by macro OP.
2331 * expprint.c (op_name_standard): Remove all the entries. Include
2332 "std-operator.def" instead.
2333 * expression.h (enum exp_opcode): Include "std-operator.def" and
2334 "ada-operator.def". Move all the entries ...
2335 * std-operator.def: ... here, wrap all the entries by macro OP.
2337 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
2339 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
2340 * breakpoint.c (remove_jit_event_breakpoints): New function.
2341 * jit.c (jit_descriptor_addr): Delete.
2342 (registering_code): Delete.
2343 (clear_int): Delete.
2344 (jit_inferior_data): New variable.
2345 (struct jit_inferior_data): New type.
2346 (get_jit_inferior_data): New function.
2347 (jit_inferior_data_cleanup): New function.
2348 (jit_read_descriptor): Adjust.
2349 (jit_register_code): Adjust.
2350 (jit_breakpoint_re_set_internal): New function; move code here ...
2351 (jit_inferior_init): ... from here.
2352 (jit_breakpoint_re_set): Adjust.
2353 (jit_reset_inferior_data_and_breakpoints): New function.
2354 (jit_inferior_created_observer): Adjust.
2355 (jit_inferior_exit_hook): Adjust.
2356 (jit_executable_changed_observer): New function.
2357 (jit_event_handler): Adjust.
2358 (_initialize_jit): Adjust.
2360 2011-01-31 Michael Snyder <msnyder@vmware.com>
2362 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
2365 2011-01-31 Tom Tromey <tromey@redhat.com>
2368 * python/python.c (execute_gdb_command): Call
2369 prevent_dont_repeat.
2370 * top.c (suppress_dont_repeat): New global.
2371 (dont_repeat): Use it.
2372 (prevent_dont_repeat): New function.
2373 * command.h (prevent_dont_repeat): Declare.
2375 2011-01-31 Tom Tromey <tromey@redhat.com>
2377 * infcmd.c (finish_backward): Use breakpoint_set_silent.
2378 * python/py-breakpoint.c (bppy_set_silent): Use
2379 breakpoint_set_silent.
2380 (bppy_set_thread): Use breakpoint_set_thread.
2381 (bppy_set_task): Use breakpoint_set_task.
2382 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
2383 (breakpoint_set_task): Declare.
2384 (make_breakpoint_silent): Remove.
2385 * breakpoint.c (breakpoint_set_silent): New function.
2386 (breakpoint_set_thread): Likewise.
2387 (breakpoint_set_task): Likewise.
2388 (make_breakpoint_silent): Remove.
2390 2011-01-31 Tom Tromey <tromey@redhat.com>
2392 * breakpoint.h (user_breakpoint_p): Declare.
2393 * breakpoint.c (user_breakpoint_p): New function.
2394 (breakpoint_1): Use it.
2395 (save_breakpoints): Likewise.
2397 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2399 * configure.ac: Add handling of Python distribution on Windows.
2400 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
2401 sysconfig variables are not defined, then do not use them.
2402 On Windows, if LIBPL is not defined, then use prefix + '/libs'
2403 instead. On Windows, return all paths using forward-slashes
2404 rather than backslashes.
2406 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2408 * configure.ac: Remove fallback behavior for building
2409 against Python. Remove tweaking of Python include path.
2410 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
2411 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
2412 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
2413 Always restore CPPFLAGS and LIBS after linking test.
2414 * configure: Regenerated.
2415 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
2416 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
2417 * python/python-internal.h: Adjust includes of Python .h files.
2419 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2421 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
2424 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2426 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
2429 2011-01-31 Yao Qi <yao@codesourcery.com>
2431 * arm-linux-nat.c: Update calls to regcache_register_status
2432 instead of regcache_valid_p.
2433 * aix-thread.c: Likewise.
2434 * i386gnu-nat.c: Likewise.
2436 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2439 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
2440 touching TYPE_FIELD_ARTIFICIAL.
2442 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
2444 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
2447 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2449 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
2450 selected, don't try iterating over the traceframe's blocks.
2451 (tfile_has_stack): If there's no traceframe selected, then there's
2453 (tfile_has_registers): If there's no traceframe selected, then
2454 there's no registers.
2456 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2458 * target.c (memory_xfer_partial): No need to restore shadows if we
2459 haven't read anything.
2461 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2463 * mips-tdep.c (mips_print_register): Use get_frame_register_value
2464 and val_print_scalar_formatted.
2466 2011-01-27 Pedro Alves <pedro@codesourcery.com>
2468 * tracepoint.c (tfile_read): New.
2469 (tfile_open): Use it.
2470 (tfile_get_traceframe_address): Use it.
2471 (tfile_trace_find): Use it.
2472 (walk_blocks_callback_func): New typedef.
2473 (match_blocktype): New function.
2474 (traceframe_walk_blocks): New function.
2475 (traceframe_find_block_type): New function.
2476 (tfile_fetch_registers, tfile_xfer_partial)
2477 (tfile_get_trace_state_variable_value): Use
2478 traceframe_find_block_type and tfile_read.
2480 2011-01-26 Kevin Buettner <kevinb@redhat.com>
2482 * remote-mips.c: Add internationalization mark ups. Remove
2483 trailing \n from already marked up strings.
2485 2011-01-26 Tom Tromey <tromey@redhat.com>
2487 * python/py-prettyprint.c (print_string_repr): Clear
2488 'addressprint' option when calling val_print_string.
2489 (print_children): Handle Val_pretty_default. Clear 'addressprint'
2490 option when calling val_print_string.
2492 2011-01-26 Tom Tromey <tromey@redhat.com>
2494 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
2496 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
2498 (gdb_py_longest, gdb_py_ulongest): New typedefs.
2499 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
2500 (gdb_py_long_as_ulongest): New defines.
2501 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
2502 (gdb_py_int_as_long): Declare.
2503 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
2504 GDB_PY_LL_ARG, gdb_py_object_from_longest.
2505 (valpy_long): Add comment.
2506 * python/py-utils.c (get_addr_from_python): Use
2507 gdb_py_long_as_ulongest. Handle overflow properly.
2508 (gdb_py_object_from_longest): New function.
2509 (gdb_py_object_from_ulongest): Likewise.
2510 (gdb_py_int_as_long): Likewise.
2511 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
2512 * python/py-symtab.c (salpy_get_pc): Use
2513 gdb_py_long_from_ulongest.
2514 (salpy_get_line): Use PyInt_FromLong.
2515 * python/py-param.c (set_parameter_value): Use
2517 * python/py-lazy-string.c (stpy_get_address): Use
2518 gdb_py_long_from_ulongest.
2519 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
2520 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
2521 * python/py-breakpoint.c (bppy_set_thread): Use
2523 (bppy_set_task): Likewise.
2524 (bppy_set_ignore_count): Likewise.
2525 (bppy_set_hit_count): Likewise.
2526 * python/py-block.c (blpy_get_start): Use
2527 gdb_py_object_from_ulongest.
2528 (blpy_get_end): Likewise.
2529 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
2531 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
2534 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
2535 * gdb/solib.c (solib_read_symbols): Check for addr_low in
2536 equality test for objfile, initialize addr_low if needed.
2538 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2540 * tui/tui-regs.c (tui_register_format): Remove dead code.
2542 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2544 * printcmd.c (print_formatted): Use val_print_scalar_formatted
2545 instead of print_scalar_formatted.
2546 (print_scalar_formatted): Don't handle 's' format strings here,
2547 and add an assertion that we never see such format here.
2548 * valprint.h (val_print_scalar_formatted): Declare.
2549 * valprint.c (val_print_scalar_formatted): New.
2550 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
2551 instead of print_scalar_formatted.
2552 * jv-valprint.c (java_val_print): Ditto.
2553 * p-valprint.c (pascal_val_print): Ditto.
2554 * ada-valprint.c (ada_val_print_1): Ditto.
2555 * f-valprint.c (f_val_print): Ditto.
2556 * infcmd.c (registers_info): Ditto.
2557 * m2-valprint.c (m2_val_print): Ditto.
2559 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2561 * m2-valprint.c (print_unbounded_array): Pass
2562 value_contents_for_printing rather than value_contents, to
2563 m2_print_array_contents. Also pass in the value.
2565 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2567 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
2568 (save_gdb_index_command): Switch to .gdb_index version 4.
2570 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2572 * mi/mi-main.c (get_register): Use get_frame_register_value rather
2573 than frame_register, and always pass a valid value to val_print.
2575 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2577 Centralize printing "<optimized out>".
2579 * valprint.h (val_print_optimized_out): Declare.
2580 * cp-valprint.c (cp_print_value_fields): Use
2581 val_print_optimized_out.
2582 * jv-valprint.c (java_print_value_fields): Ditto.
2583 * p-valprint.c (pascal_object_print_value_fields): Ditto.
2584 * printcmd.c (print_formatted): Ditto.
2585 * valprint.c (valprint_check_validity): Ditto.
2586 (value_check_printable): Ditto.
2587 (val_print_optimized_out): New.
2589 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2591 * infcmd.c (default_print_registers_info): Allocate values so to
2592 never pass a NULL value to val_print.
2594 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2596 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
2597 boolean. Make sure to always pass a value that matches the
2598 contents buffer to callees. Preserve `address' for following
2600 * value.c (value_contents_for_printing_const): New.
2601 (value_address): Constify value argument.
2602 * value.h (value_contents_for_printing_const): Declare.
2603 (value_address): Constify value argument.
2605 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2607 * regcache.c (struct regcache_descr): Rename
2608 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
2609 and sizeof_cooked_register_valid_p to
2610 sizeof_cooked_register_status.
2611 (init_regcache_descr): Adjust.
2612 (struct regcache): Rename register_valid_p field to
2614 (regcache_xmalloc_1, regcache_xfree, regcache_save)
2615 (do_cooked_read): Adjust.
2616 (regcache_valid_p): Rename to ...
2617 (regcache_register_status): ... this. Adjust.
2618 (regcache_invalidate): Adjust.
2619 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
2621 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
2622 as unavailable, not valid.
2623 (regcache_dump): Adjust.
2624 * regcache.h (enum register_status): New.
2625 (regcache_register_status): Declare.
2626 (regcache_invalidate): Delete declaration.
2627 * corelow.c (get_core_registers): Adjust.
2628 * tracepoint.c (tfile_fetch_registers): Adjust.
2629 * trad-frame.c (REG_VALUE): Rename to ...
2630 (TF_REG_VALUE): ... this.
2631 (REG_UNKNOWN): Rename to ...
2632 (TF_REG_UNKNOWN): ... this.
2633 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
2634 * mi/mi-main.c (register_changed_p): Adjust.
2636 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2638 * regcache.c (struct regcache_descr): Remove outdated comment.
2639 (init_regcache_descr): Remove sizeof_raw_register_valid_p
2641 (regcache_xmalloc): Rename to ...
2642 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
2643 Allocate the regcache type accordingly.
2644 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
2645 (regcache_xfree): Asser the source is also readonly. Copy sizeof
2646 cooked registers, not raw.
2647 (regcache_dup_no_passthrough): Delete.
2648 (get_thread_arch_regcache): Use regcache_xmalloc_1.
2649 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
2650 mention obsolete write_register_bytes.
2651 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
2653 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2655 Stop remote_read_bytes from handling partial reads itself.
2657 * remote-fileio.c: Include target.h.
2658 (remote_fileio_write_bytes): Delete.
2659 (remote_fileio_func_open, remote_fileio_func_write)
2660 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
2662 (remote_fileio_func_stat): Use target_read_memory and
2663 target_write_memory.
2664 (remote_fileio_func_gettimeofday): Use target_write_memory.
2665 (remote_fileio_func_system): Use target_read_memory.
2666 * remote.c (remote_write_bytes): Make it static.
2667 (remote_read_bytes): Don't handle partial reads here.
2668 * remote.h (remote_read_bytes): Delete declaration.
2670 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2672 Simplify XML parsing a bit.
2674 * xml-support.h (gdb_xml_parse_quick): Declare.
2675 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
2676 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
2678 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
2679 gdb_xml_create_parser_and_cleanup_1.
2680 (gdb_xml_parse_quick): New.
2681 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
2682 * osdata.c (osdata_parse): Ditto.
2683 * remote.c (remote_threads_info): Ditto.
2684 * solib-target.c (solib_target_parse_libraries): Ditto.
2685 * xml-syscall.c (syscall_parse_xml): Ditto.
2686 * xml-tdesc.c (tdesc_parse_xml): Ditto.
2688 2011-01-24 Kevin Buettner <kevinb@redhat.com>
2690 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
2691 with remote-mips.o added to gdb_target_obs.
2692 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
2694 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2696 * ada-valprint.c (val_print_packed_array_elements): Pass the
2697 correct struct value to val_print.
2698 (ada_val_print_1): Ditto.
2700 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2702 Don't lose embedded_offset in printing routines throughout.
2704 * valprint.h (val_print_array_elements): Change prototype.
2705 * valprint.c (val_print_array_elements): Add `embedded_offset'
2706 parameter, and adjust to pass it down to val_print, while passing
2707 `valaddr' or `address' unmodified. Take embedded_offset into
2708 account when checking repetitions.
2709 * c-valprint.c (c_val_print): Pass embedded_offset to
2710 val_print_array_elements instead of adjusting `valaddr' and
2712 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
2713 embedded_offset to val_print_array_elements instead of adjusting
2715 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
2716 * p-valprint.c (pascal_val_print): Pass embedded_offset to
2717 val_print_array_elements and pascal_object_print_value_fields
2718 instead of adjusting `valaddr'.
2719 (pascal_object_print_value_fields): Add `offset' parameter, and
2721 (pascal_object_print_value): Add `offset' parameter, and adjust to
2723 (pascal_object_print_static_field): Use
2724 value_contents_for_printing/value_embedded_offset, rather than
2726 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
2727 parameter, and adjust to use it. Use
2728 value_contents_for_printing/value_embedded_offset, rather than
2730 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
2731 (ada_val_print_array): Add `offset' parameter, and adjust to use
2733 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
2734 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
2735 Instead work with offsets. Use
2736 value_contents_for_printing/value_embedded_offset, rather than
2737 value_contents. Change `defer_val_int' local type to CORE_ADDR,
2738 and use value_from_pointer to extract a target pointer, rather
2739 than value_from_longest.
2740 (print_variant_part): Add `offset' parameter. Replace
2741 `outer_valaddr' parameter by a new `outer_offset' parameter.
2742 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2743 (ada_value_print): Use
2744 value_contents_for_printing/value_embedded_offset, rather than
2746 (print_record): Add `offset' parameter, and adjust to pass it
2748 (print_field_values): Add `offset' parameter. Replace
2749 `outer_valaddr' parameter by a new `outer_offset' parameter.
2750 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2751 Use value_contents_for_printing/value_embedded_offset, rather than
2753 * d-valprint.c (dynamic_array_type): Use
2754 value_contents_for_printing/value_embedded_offset, rather than
2756 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
2757 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2758 (java_print_value_fields): Take `offset' into account. Don't
2759 re-adjust `valaddr'. Instead pass down adjusted offsets.
2760 (java_val_print): Take `embedded_offset' into account. Pass it to
2761 java_print_value_fields.
2762 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
2763 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
2764 down adjusted offsets.
2765 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
2766 (f_val_print): Take `embedded_offset' into account.
2768 2011-01-21 Joel Brobecker <brobecker@adacore.com>
2770 * inflow.c: Include "gdbcmd.h".
2771 (interactive_mode): New static global, moved here from top.c.
2772 (show_interactive_mode): New function, moved here from top.c.
2773 use gdb_has_a_terminal instead of input_from_terminal_p to
2774 determine the current mode.
2775 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
2777 (_initialize_inflow): Add the "set/show interactive-mode"
2778 commands. Moved here from top.c, after having adjusted slightly
2780 * top.c (interactive_mode, show_interactive_mode): Delete, moved
2782 (input_from_terminal_p): Remove handling of "interactive-mode"
2783 setting, moved to infow.c.
2784 (init_main): Remove creation of the "set/show interactive-mode"
2785 commands, moved to inflow.c.
2787 2011-01-19 Joel Brobecker <brobecker@adacore.com>
2789 * NEWS: Add entry for native ia64-hpux support.
2791 2011-01-19 Tom Tromey <tromey@redhat.com>
2794 * thread.c (free_thread): Free 'name'.
2795 (print_thread_info): Emit thread name. Change CLI output.
2796 (thread_name_command): New function.
2797 (do_captured_thread_select): Emit newline.
2798 (_initialize_thread): Register 'thread name' command.
2799 * target.h (struct target_ops) <to_thread_name>: New field.
2800 (target_thread_name): New macro.
2801 * target.c (update_current_target): Handle to_thread_name.
2802 * python/py-infthread.c (thpy_get_name): New function.
2803 (thpy_set_name): Likewise.
2804 (thread_object_getset): Add "name".
2805 * linux-nat.c (linux_nat_thread_name): New function.
2806 (linux_nat_add_target): Set to_thread_name.
2807 * gdbthread.h (struct thread_info) <name>: New field.
2809 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2811 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
2812 (ada_val_print_1): Likewise.
2814 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2816 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
2817 upper limit address is not greater than the function end address
2818 when the upper limit could not be computed using the debugging
2821 2011-01-17 Tom Tromey <tromey@redhat.com>
2823 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
2825 * utils.c: Include gdb_regex.h.
2826 (do_regfree_cleanup): New function.
2827 (make_regfree_cleanup): Likewise.
2828 (get_regcomp_error): Likewise.
2829 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
2831 2011-01-17 Tom Tromey <tromey@redhat.com>
2833 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
2836 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
2838 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
2839 for internal variables.
2840 (last_was_structop): New static variable.
2841 (COMPLETE): New token.
2842 (field_exp): New rule to group all '.' suffix handling.
2843 Add mark_struct_expression calls when approriate to be able
2844 to correctly find fields for completion.
2845 (yylex): Adapt to handle field completion and set INTVAR when
2848 2011-01-14 Yao Qi <yao@codesourcery.com>
2850 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
2851 save_reggroup, restore_reggroup and all_reggroup.
2853 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2855 * ada-valprint. (ada_printchar): Use the correct type length
2856 in call to ada_emit_char.
2857 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
2859 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
2861 * solib-som.h (hpux_major_release): Declare variable here.
2862 * solib-som.c: Remove <sys/utsname.h> header.
2863 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
2864 (hpux_major_release): Make global, change default value to
2865 DEFAULT_HPUX_MAJOR_RELEASE.
2866 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
2867 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
2868 Add "solib-som.h" header.
2869 (set_hpux_major_release): New function.
2870 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
2872 2011-01-14 Mike Frysinger <vapier@gentoo.org>
2874 * configure.tgt (*-*-uclinux*): Match more Linux os targets
2876 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2878 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
2879 new-line at end of warning message.
2880 (ia64_hpux_store_register): Remove trailing new-line at end of
2882 * ia64-hpux-tdep.c: Rephrase comment.
2883 * solib-ia64-hpux.c (struct dld_info): Change type of field
2884 dld_flags from "long long" to ULONGEST.
2886 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2888 * target.h (deprecated_child_ops): Delete declaration.
2889 * target.c (deprecated_child_ops): Delete definition.
2891 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2893 * Makefile.in (hpux-thread.o): Delete rule.
2894 * configure.ac: Don't check for HPUX DCE threads support.
2895 * configure, config.in: Regenerate.
2896 * hppa-hpux-nat.c (child_suppress_run): Delete.
2897 (hppa_hpux_child_can_run): Delete.
2898 (_initialize_hppa_hpux_nat): Don't override to_can_run.
2899 * hpux-thread.c: Delete.
2901 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2903 * hpux-thread.c (hpux_pid_to_str): Delete.
2905 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2907 * ada-valprint.c (ada_emit_char): Remove strange code.
2908 Check that c is <= UCHAR_MAX before passing it to isascii.
2909 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2911 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2913 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
2914 to the case where instream is stdin.
2916 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2918 * ia64-tdep.h (struct regcache): Forward declare.
2919 (struct ia64_infcall_ops): New struct type.
2920 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
2922 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
2923 Renames ia64_find_global_pointer.
2924 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
2925 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
2926 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
2928 (ia64_infcall_ops): New static global constant.
2929 (ia64_gdbarch_init): Set tdep->infcall_ops.
2930 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
2931 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
2932 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
2933 (ia64_hpux_dummy_code): New static global constant.
2934 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
2935 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
2936 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
2938 (ia64_hpux_infcall_ops): New static global constant.
2939 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
2940 for inferior function calls to work properly on ia64-hpux.
2942 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2944 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
2945 * ia64-tdep.h (struct frame_info): forward declaration.
2946 (struct gdbarch_tdep): Add field size_of_register_frame.
2947 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
2948 to determine the size of the register frame.
2949 (ia64_size_of_register_frame): New function.
2950 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
2951 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
2952 (IA64_HPUX_UREG_REASON): New macro.
2953 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
2955 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
2956 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
2957 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
2960 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2962 Add support for ia64-hpux.
2963 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
2964 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
2966 * configure.host: Add handling for ia64-hpux hosts. Add associated
2968 * configure.tgt: Add handling for ia64-hpux targets.
2969 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
2970 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
2971 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2973 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2975 [ttrace] Compute thread list immediately after attach.
2976 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
2978 (inf_ttrace_attach): Use it.
2980 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2982 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
2983 if we could not determine the frame's function address. Instead,
2984 use the frame's PC, and then continue.
2986 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2988 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
2989 not already defined.
2991 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2993 * ia64-tdep.c (ia64_struct_type_p): New function.
2994 (ia64_extract_return_value): Handle integral values that are
2995 less than 8 bytes long.
2996 (ia64_push_dummy_call): Likewise.
2998 2011-01-13 Joel Brobecker <brobecker@adacore.com>
3000 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
3001 floatformat_ia64_ext.
3002 (floatformat_ia64_ext_big): New static const.
3003 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
3005 2011-01-12 Tom Tromey <tromey@redhat.com>
3007 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
3009 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
3010 (mi_cmd_thread_list_ids): Likewise.
3011 (mi_cmd_data_list_changed_registers): Likewise.
3012 (mi_cmd_data_list_register_values): Likewise.
3013 (mi_cmd_data_write_register_values): Likewise.
3014 (mi_cmd_data_evaluate_expression): Likewise.
3015 (mi_cmd_data_read_memory): Likewise.
3016 (mi_cmd_data_read_memory_bytes): Likewise.
3017 (mi_cmd_data_write_memory): Likewise.
3018 (mi_cmd_enable_timings): Likewise.
3019 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
3020 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
3021 (mi_cmd_var_delete): Likewise.
3022 (mi_cmd_var_set_format): Likewise.
3023 (mi_cmd_var_show_format): Likewise.
3024 (mi_cmd_var_info_num_children): Likewise.
3025 (mi_cmd_var_list_children): Likewise.
3026 (mi_cmd_var_info_type): Likewise.
3027 (mi_cmd_var_info_expression): Likewise.
3028 (mi_cmd_var_show_attributes): Likewise.
3029 (mi_cmd_var_assign): Likewise.
3030 (mi_cmd_var_update): Likewise.
3031 (mi_cmd_enable_pretty_printing): Likewise.
3032 (mi_cmd_var_set_update_range): Likewise.
3033 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
3035 (mi_cmd_target_file_put): Likewise.
3036 (mi_cmd_target_file_delete): Likewise.
3037 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
3039 (mi_cmd_stack_info_depth): Likewise.
3040 (mi_cmd_stack_list_locals): Likewise.
3041 (mi_cmd_stack_list_args): Likewise.
3042 (mi_cmd_stack_select_frame): Likewise.
3043 (mi_cmd_stack_select_frame): Likewise.
3044 (mi_cmd_stack_info_frame): Likewise.
3045 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
3047 (mi_cmd_file_list_exec_source_files): Likewise.
3048 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
3049 (mi_cmd_env_cd): Likewise.
3050 (mi_cmd_env_path): Likewise.
3051 (mi_cmd_env_dir): Likewise.
3052 (mi_cmd_inferior_tty_show): Likewise.
3053 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
3054 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
3055 (mi_cmd_break_watch): Likewise.
3057 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
3059 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
3060 (ppc_linux_insert_hw_breakpoint): Likewise.
3061 (ppc_linux_remove_hw_breakpoint): Likewise.
3062 (ppc_linux_insert_watchpoint): Likewise.
3064 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
3065 Jan Kratochvil <jan.kratochvil@redhat.com>
3067 PR fortran/11104 and DWARF unbound arrays detection.
3068 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
3069 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
3070 unspecified upper bound.
3071 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
3072 variables array_size_array, tmp_type and offset_item. New variable
3073 array. Remove call to f77_get_upperbound. New variables array_type
3074 and index. Call value_subscripted_rvalue for each dimenasion. Remove
3075 the final call to deprecated_set_value_type.
3077 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
3079 Make value allocations more lazy.
3080 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
3081 instead of allocate_value and set_value_lazy when possible.
3082 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
3083 instead of allocate_value and set_value_lazy.
3084 * findvar.c (value_of_register_lazy): Likewise.
3085 (read_var_value): Remove V preallocation, call just check_typedef in
3086 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
3087 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
3088 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
3089 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
3090 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
3091 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
3092 the end, remove set_value_lazy there.
3093 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
3094 instead of allocate_value and set_value_lazy when possible.
3095 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
3096 * value.c (allocate_computed_value): Use allocate_value_lazy instead
3097 of allocate_value and set_value_lazy.
3098 (value_from_contents_and_address): Use allocate_value_lazy instead of
3099 allocate_value and set_value_lazy when possible.
3101 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
3103 * disasm.c (dump_insns): Support dumping opcodes for MI.
3104 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
3105 dumping of instruction opcodes.
3107 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
3109 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
3112 2011-01-11 Tom Tromey <tromey@redhat.com>
3114 * thread.c (do_captured_thread_select): Emit newline before
3117 2011-01-11 Michael Snyder <msnyder@vmware.com>
3119 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
3120 * score-tdep.c: Ditto.
3121 * score-tdep.h: Ditto.
3122 * ser-base.c: Ditto.
3123 * ser-go32.c: Ditto.
3126 * ser-mingw.c: Ditto.
3127 * ser-pipe.c: Ditto.
3129 * ser-unix.c: Ditto.
3130 * sh64-tdep.c: Ditto.
3131 * shnbsd-nat.c: Ditto.
3135 * solib-darwin.c: Ditto.
3136 * solib-frv.c: Ditto.
3138 * solib-irix.c: Ditto.
3139 * solib-osf.c: Ditto.
3140 * solib-pa64.c: Ditto.
3141 * solib-som.c: Ditto.
3142 * solib-spu.c: Ditto.
3143 * solib-sunos.c: Ditto.
3144 * solib-svr4.c: Ditto.
3146 * sol-thread.c: Ditto.
3150 * sparc64-linux-tdep.c: Ditto.
3151 * sparc64-tdep.c: Ditto.
3152 * sparc-linux-nat.c: Ditto.
3153 * sparc-linux-tdep.c: Ditto.
3154 * sparc-sol2-nat.c: Ditto.
3155 * sparc-sol2-tdep.c: Ditto.
3156 * sparc-tdep.c: Ditto.
3157 * sparc-tdep.h: Ditto.
3158 * spu-tdep.c: Ditto.
3159 * stabsread.c: Ditto.
3160 * stabsread.h: Ditto.
3168 * target-descriptions.c: Ditto.
3169 * target-descriptions.h: Ditto.
3171 * target-memory.c: Ditto.
3172 * terminal.h: Ditto.
3175 * tracepoint.c: Ditto.
3176 * tracepoint.h: Ditto.
3177 * trad-frame.h: Ditto.
3178 * typeprint.c: Ditto.
3180 2011-01-11 Michael Snyder <msnyder@vmware.com>
3182 * ui-file.c: Comment cleanup, mostly periods and spaces.
3187 * v850-tdep.c: Ditto.
3188 * valarith.c: Ditto.
3190 * valprint.c: Ditto.
3191 * valprint.h: Ditto.
3196 * vax-tdep.c: Ditto.
3200 * windows-nat.c: Ditto.
3201 * windows-tdep.c: Ditto.
3202 * xcoffread.c: Ditto.
3203 * xcoffsolib.c: Ditto.
3204 * xml-support.c: Ditto.
3205 * xstormy16-tdep.c: Ditto.
3206 * xtensa-tdep.c: Ditto.
3207 * xtensa-tdep.h: Ditto.
3209 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
3211 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
3212 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
3214 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
3215 Thiago Jung Bauermann <bauerman@br.ibm.com>
3217 Implement support for PowerPC BookE ranged watchpoints.
3219 (struct breakpoint_ops) <resources_needed>: New method.
3220 Initialize to NULL in all existing breakpoint_ops instances.
3221 (struct breakpoint) <exact>: New field.
3222 (target_exact_watchpoints): Declare external global.
3223 * breakpoint.c (target_exact_watchpoints): New global flag.
3224 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
3225 b->enable_state to bp_enabled before calling
3226 hw_watchpoint_used_count.
3227 (hw_watchpoint_used_count): Iterate over all bp_locations in a
3228 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
3230 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
3231 if the watchpoint is exact.
3232 (resources_needed_watchpoint): New function.
3233 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
3234 (watch_command_1): Set b->exact if the user asked for an exact
3235 watchpoint and one can be set.
3236 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
3237 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
3238 the user asks for an exact watchpoint and one can be set. Return
3239 number of needed debug registers to watch the expression.
3240 * gdbtypes.c (is_scalar_type): New function, based on
3241 valprint.c:scalar_type_p.
3242 (is_scalar_type_recursive): New function.
3243 * gdbtypes.h (is_scalar_type_recursive): Declare.
3244 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
3245 handle regions when ranged watchpoints are available.
3246 (create_watchpoint_request): New function.
3247 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
3248 create_watchpoint_request.
3249 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
3250 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
3251 `set powerpc' and `show powerpc' commands.
3252 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
3253 Mention documentation comment in the target macro.
3254 (target_region_ok_for_hw_watchpoint): Document return value.
3256 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
3258 * breakpoint.c (update_watchpoint): Decide on using a software or
3259 hardware watchpoint after the bp_locations are created.
3261 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
3263 Convert hardware watchpoints to use breakpoint_ops.
3264 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
3265 <insert_location>: ... this. Return int instead of void.
3266 Accept pointer to struct bp_location instead of pointer to
3267 struct breakpoint. Adapt all implementations.
3268 (breakpoint_ops) <remove>: Rename to...
3269 <remove_location>: ... this. Accept pointer to struct bp_location
3270 instead of pointer to struct breakpoint. Adapt all implementations.
3271 * breakpoint.c (insert_catchpoint): Delete function.
3272 (insert_bp_location): Call the watchpoint or catchpoint's
3273 breakpoint_ops.insert method.
3274 (remove_breakpoint_1): Call the watchpoint or catchpoint's
3275 breakpoint_ops.remove method.
3276 (insert_watchpoint, remove_watchpoint): New functions.
3277 (watchpoint_breakpoint_ops): New structure.
3278 (watch_command_1): Initialize the OPS field.
3279 * inf-child.c (inf_child_insert_fork_catchpoint)
3280 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
3281 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
3282 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
3284 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
3285 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
3286 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
3287 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
3288 * target.c (update_current_target): Change default implementation of
3289 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
3290 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
3291 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
3292 to_set_syscall_catchpoint to return_one.
3293 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
3294 (debug_to_insert_exec_catchpoint): Report return value.
3295 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
3296 (to_insert_exec_catchpoint): Change declaration to return int instead
3299 2011-01-11 Michael Snyder <msnyder@vmware.com>
3301 * arm-tdep.c: Internationalization.
3304 * fork-child.c: Ditto.
3305 * nto-procfs.c: Ditto.
3306 * ppc-sysv-tdep.c: Ditto.
3308 * remote-mips.c: Ditto.
3310 * rs6000-nat.c: Ditto.
3311 * rs6000-tdep.c: Ditto.
3315 * xml-support.c: Ditto.
3316 * mi/mi-cmd-break.c: Ditto.
3317 * mi/mi-cmd-var.c: Ditto.
3318 * mi/mi-interp.c: Ditto.
3319 * mi/mi-main.c: Ditto.
3321 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
3323 * remote-sim.c (gdbsim_store_register): Update API to
3324 sim_store_register to check more error conditions.
3326 2011-01-10 Michael Snyder <msnyder@vmware.com>
3328 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
3329 * nto-tdep.c: Ditto.
3330 * nto-tdep.h: Ditto.
3331 * objc-exp.y: Ditto.
3332 * objc-lang.c: Ditto.
3333 * objfiles.c: Ditto.
3334 * objfiles.h: Ditto.
3335 * observer.c: Ditto.
3336 * opencl-lang.c: Ditto.
3339 * parser-defs.h: Ditto.
3342 * posix-hdep.c: Ditto.
3343 * ppcbug-rom.c: Ditto.
3344 * ppc-linux-nat.c: Ditto.
3345 * ppc-linux-tdep.c: Ditto.
3346 * ppc-linux-tdep.h: Ditto.
3347 * ppcnbsd-tdep.c: Ditto.
3348 * ppcobsd-tdep.c: Ditto.
3349 * ppcobsd-tdep.h: Ditto.
3350 * ppc-sysv-tdep.c: Ditto.
3351 * ppc-tdep.h: Ditto.
3352 * printcmd.c: Ditto.
3353 * proc-abi.c: Ditto.
3354 * proc-flags.c: Ditto.
3356 * proc-utils.h: Ditto.
3357 * progspace.h: Ditto.
3358 * prologue-value.c: Ditto.
3359 * prologue-value.h: Ditto.
3360 * psympriv.h: Ditto.
3362 * p-typeprint.c: Ditto.
3363 * p-valprint.c: Ditto.
3364 * ravenscar-sparc-thread.c: Ditto.
3365 * ravenscar-thread.c: Ditto.
3366 * ravenscar-thread.h: Ditto.
3368 * regcache.c: Ditto.
3369 * regcache.h: Ditto.
3371 * remote-fileio.c: Ditto.
3372 * remote-fileio.h: Ditto.
3374 * remote-m32r-sdi.c: Ditto.
3375 * remote-mips.c: Ditto.
3376 * remote-sim.c: Ditto.
3377 * rs6000-aix-tdep.c: Ditto.
3378 * rs6000-nat.c: Ditto.
3379 * rs6000-tdep.c: Ditto.
3381 2011-01-10 Michael Snyder <msnyder@vmware.com>
3383 * charset.c (validate): Internationalization.
3384 * coffread.c (read_one_sym): Ditto.
3385 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
3386 * h8300-tdep.c (H8300_extract_return_value): Ditto.
3387 * inflow.c (new_tty): Ditto.
3388 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
3389 * m32c-tdep.c (m32c_return_value): Ditto.
3390 * mep-tdep.c (mep_store_return_value): Ditto.
3391 * score-tdep.c (score7_fetch_insn): Ditto.
3392 * ser-mingw.c (pipe_windows_open): Ditto.
3393 * sh64-tdep.c (sh64_extract_return_value): Ditto.
3394 * spu-tdep.c (spu_register_type): Ditto.
3395 * tracepoint.c (trace_find_command): Ditto.
3396 * valarith.c (value_pos): Ditto.
3398 2011-01-10 Joel Brobecker <brobecker@adacore.com>
3400 * ada-valprint.c (printstr): Minor comment reformatting.
3402 2011-01-08 Michael Snyder <msnyder@vmware.com>
3404 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
3407 2011-01-08 Michael Snyder <msnyder@vmware.com>
3409 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
3410 * hppa-hpux-tdep.c: Ditto.
3411 * hppa-linux-nat.c: Ditto.
3412 * hppa-linux-tdep.c: Ditto.
3413 * hppanbsd-tdep.c: Ditto.
3414 * hppa-tdep.c: Ditto.
3415 * hppa-tdep.h: Ditto.
3416 * hpux-thread.c: Ditto.
3417 * i386-cygwin-tdep.c: Ditto.
3418 * i386-darwin-nat.c: Ditto.
3419 * i386gnu-nat.c: Ditto.
3420 * i386-linux-nat.c: Ditto.
3421 * i386-linux-tdep.c: Ditto.
3422 * i386-nat.c: Ditto.
3423 * i386-nat.h: Ditto.
3424 * i386nbsd-tdep.c: Ditto.
3425 * i386-sol2-nat.c: Ditto.
3426 * i386-stub.c: Ditto.
3427 * i386-tdep.c: Ditto.
3428 * i386-tdep.h: Ditto.
3429 * i387-tdep.c: Ditto.
3430 * ia64-linux-nat.c: Ditto.
3431 * ia64-linux-tdep.c: Ditto.
3432 * ia64-tdep.c: Ditto.
3436 * inferior.c: Ditto.
3437 * inferior.h: Ditto.
3443 * iq2000-tdep.c: Ditto.
3444 * irix5-nat.c: Ditto.
3450 * jv-typeprint.c: Ditto.
3451 * jv-valprint.c: Ditto.
3452 * language.c: Ditto.
3453 * language.h: Ditto.
3454 * linespec.c: Ditto.
3455 * linux-fork.c: Ditto.
3456 * linux-nat.c: Ditto.
3457 * linux-thread-db.c: Ditto.
3458 * lm32-tdep.c: Ditto.
3460 2011-01-08 Michael Snyder <msnyder@vmware.com>
3462 * m2-exp.y: Comment cleanup, mostly periods and spaces.
3464 * m2-typeprint.c: Ditto.
3465 * m2-valprint.c: Ditto.
3466 * m32c-tdep.c: Ditto.
3467 * m32r-linux-nat.c: Ditto.
3468 * m32r-rom.c: Ditto.
3469 * m32r-tdep.c: Ditto.
3470 * m32r-tdep.h: Ditto.
3471 * m68hc11-tdep.c: Ditto.
3472 * m58klinux-nat.c: Ditto.
3473 * m68k-tdep.c: Ditto.
3474 * m88k-tdep.c: Ditto.
3475 * m88k-tdep.h: Ditto.
3476 * machoread.c: Ditto.
3477 * macrocmd.c: Ditto.
3478 * macroexp.c: Ditto.
3479 * macrotab.c: Ditto.
3482 * mdebugread.c: Ditto.
3483 * mdebugread.h: Ditto.
3486 * memory-map.h: Ditto.
3487 * mep-tdep.c: Ditto.
3488 * microblaze-rom.c: Ditto.
3489 * microblaze-tdep.c: Ditto.
3491 * mips-irix-tdep.c: Ditto.
3492 * mips-linux-nat.c: Ditto.
3493 * mips-linux-tdep.c: Ditto.
3494 * mips-linux-tdep.h: Ditto.
3495 * mipsnbsd-nat.c: Ditto.
3496 * mipsnbsd-tdep.c: Ditto.
3497 * mipsread.c: Ditto.
3498 * mips-tdep.c: Ditto.
3499 * mips-tdep.h: Ditto.
3500 * mn10300-linux-tdep.c: Ditto.
3501 * mn10300-tdep.c: Ditto.
3502 * mn10300-tdep.h: Ditto.
3505 * moxie-tdep.c: Ditto.
3506 * moxie-tdep.h: Ditto.
3509 2011-01-08 Mike Frysinger <vapier@gentoo.org>
3511 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
3513 2011-01-08 Robert Millan <rmh@gnu.org>
3515 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
3517 2011-01-07 Michael Snyder <msnyder@vmware.com>
3519 * charset.c (_initialize_charset): Fix typo in string.
3521 2011-01-07 Michael Snyder <msnyder@vmware.com>
3523 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
3525 * tui/tui-layout.c (tui_set_layout_for_display_command):
3526 Split line so that operator goes to beginning of line.
3527 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
3528 assignment out of if statement.
3530 2011-01-07 Michael Snyder <msnyder@vmware.com>
3532 * ada-lang.c: Comment cleanup, mostly periods and spaces.
3533 * ada-lang.h: Ditto.
3534 * ada-tasks.c: Ditto.
3535 * ada-valprint.c: Ditto.
3536 * aix-threads.c: Ditto.
3537 * alpha-linux-nat.c: Ditto.
3538 * alpha-linux-tdep.c: Ditto.
3539 * alpha-mdebug-tdep.c: Ditto.
3540 * alpha-nat.c: Ditto.
3541 * alpha-osf1-tdep.c: Ditto.
3542 * alpha-tdep.c: Ditto.
3543 * alphabsd-nat.c: Ditto.
3544 * alphabsd-tdep.c: Ditto.
3545 * amd64-darwin-tdep.c: Ditto.
3546 * amd64-linux-nat.c: Ditto.
3547 * amd64-linux-tdep.c: Ditto.
3548 * amd64-sol2-tdep.c: Ditto.
3549 * amd64-tdep.c: Ditto.
3550 * amd64-fbsd-tdep.c: Ditto.
3551 * amd64-nbsd-tdep.c: Ditto.
3552 * amd64-obsd-tdep.c: Ditto.
3553 * amd64-linux-nat.c: Ditto.
3554 * amd64-linux-tdep.c: Ditto.
3555 * arm-tdep.c: Ditto.
3556 * arm-tdep.h: Ditto.
3557 * armnbsd-nat.c: Ditto.
3558 * avr-tdep.c: Ditto.
3559 * bfin-tdep.c: Ditto.
3561 * c-typeprintc: Ditto.
3562 * c-valprint.c: Ditto.
3563 * coff-pe-read.h: Ditto.
3564 * coffreead.c: Ditto.
3565 * cris-tdep.c: Ditto.
3567 * darwin-nat-info.c: Ditto.
3568 * darwin-nat.c: Ditto.
3569 * dbug-rom.c: Ditto.
3573 * dec-thread.c: Ditto.
3575 * demangle.c: Ditto.
3576 * dicos-tdep.c: Ditto.
3577 * dictionary.c: Ditto.
3578 * dictionary.h: Ditto.
3579 * dink32-rom.c: Ditto.
3581 * doublest.c: Ditto.
3583 * dummy-frame.c: Ditto.
3584 * dwarf2-frame.c: Ditto.
3585 * dwarf2expr.c: Ditto.
3586 * dwarf2loc.c: Ditto.
3587 * dwarf2read.c: Ditto.
3591 * event-top.h: Ditto.
3592 * exceptions.c: Ditto.
3593 * exceptions.h: Ditto.
3595 * expprint.c: Ditto.
3596 * expression.h: Ditto.
3600 * f-typeprint.c: Ditto.
3601 * f-valprint.c: Ditto.
3602 * fbsd-nat.c: Ditto.
3604 * fork-child.c: Ditto.
3607 * frv-linux-tdep.c: Ditto.
3608 * frv-tdep.c: Ditto.
3610 * gdb-stabs.h: Ditto.
3611 * gdb_assert.h: Ditto.
3612 * gdb_string.h: Ditto.
3613 * gdb_thread_db.h: Ditto.
3614 * gdb_wait.h: Ditto.
3615 * gdbarch.sh: Ditto.
3617 * gdbthread.h: Ditto.
3618 * gdbtypes.c: Ditto.
3619 * gdbtypes.h: Ditto.
3622 * gnu-v2-abi.c: Ditto.
3623 * gnu-v3-abi.c: Ditto.
3624 * go32-nat.c: Ditto.
3625 * gdbarch.c: Regenerate.
3626 * gdbarch.h: Regenerate.
3628 2011-01-07 Michael Snyder <msnyder@vmware.com>
3630 * ax-gdb.c: Adjust some long output strings.
3631 * breakpoint.c: Ditto.
3636 * linux-nat.c: Ditto.
3637 * solib-pa64.c: Ditto.
3638 * solib-som.c: Ditto.
3640 2011-01-06 Tom Tromey <tromey@redhat.com>
3644 * python/python.c (GdbMethods): Add "newest_frame" method.
3645 * python/python-internal.h (gdbpy_newest_frame): Declare.
3646 * python/py-frame.c (gdbpy_newest_frame): New function.
3648 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
3650 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
3651 * jit.c (jit_debug): New variable.
3652 (show_jit_debug): New function.
3653 (struct target_buffer): Use ULONGEST.
3654 (bfd_open_from_target_memory): Likewise.
3655 (jit_register_code, jit_inferior_init): Add debug output.
3656 (_initialize_jit): Register "debug jit" command.
3658 2011-01-06 Tom Tromey <tromey@redhat.com>
3660 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
3661 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
3664 2011-01-06 Tom Tromey <tromey@redhat.com>
3666 * python/py-frame.c (frapy_block): Use get_frame_block.
3668 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3670 Do not stop on SIGPRIO signals by default
3671 * infrun.c (_initialize_infrun): Unset signal_stop and
3672 signal_print for TARGET_SIGNAL_PRIO.
3674 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3676 * ada-tasks.c: Fix style violation in comment.
3678 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3680 * linespec.c (decode_compound, find_method): Remove trailing \n
3681 at end of error string.
3682 * solib-irix.c (irix_current_sos): Likewise.
3683 * varobj.c (uninstall_variable): Likewise.
3685 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3687 * copyright.py: New script.
3688 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
3689 Launch emacs without exec'ing. Call copyright.py afterwards.
3691 2011-01-05 Michael Snyder <msnyder@vmware.com>
3693 * addrmap.c: Shorten lines of >= 80 columns.
3694 * arch-utils.c: Ditto.
3695 * arch-utils.h: Ditto.
3697 * ax-general.c: Ditto.
3699 * blockframe.c: Ditto.
3700 * breakpoint.c: Ditto.
3701 * buildsym.c: Ditto.
3703 * c-typeprint.c: Ditto.
3705 * coffread.c: Ditto.
3709 * cp-namespace.c: Ditto.
3710 * cp-support.c: Ditto.
3711 * dbug-rom.c: Ditto.
3716 * dictionary.c: Ditto.
3718 * doublest.c: Ditto.
3719 * dwarf2-frame.c: Ditto.
3720 * dwarf2expr.c: Ditto.
3721 * dwarf2loc.c: Ditto.
3722 * dwarf2read.c: Ditto.
3725 * event-loop.c: Ditto.
3726 * event-loop.h: Ditto.
3727 * exceptions.h: Ditto.
3729 * expprint.c: Ditto.
3730 * expression.h: Ditto.
3732 * f-valprint.c: Ditto.
3734 * frame-base.c: Ditto.
3735 * frame-unwind.c: Ditto.
3736 * frame-unwind.h: Ditto.
3740 * gdb-stabs.h: Ditto.
3741 * gdb_assert.h: Ditto.
3742 * gdb_dirent.h: Ditto.
3743 * gdb_obstack.h: Ditto.
3745 * gdbtypes.c: Ditto.
3746 * gdbtypes.h: Ditto.
3747 * inf-ttrace.c: Ditto.
3752 * inline-frame.h: Ditto.
3753 * language.c: Ditto.
3754 * language.h: Ditto.
3755 * libunwind-frame.c: Ditto.
3756 * libunwind-frame.h: Ditto.
3757 * linespec.c: Ditto.
3758 * linux-nat.c: Ditto.
3759 * linux-nat.h: Ditto.
3760 * linux-thread-db.c: Ditto.
3761 * machoread.c: Ditto.
3762 * macroexp.c: Ditto.
3763 * macrotab.c: Ditto.
3766 * mdebugread.c: Ditto.
3771 * objfiles.c: Ditto.
3772 * objfiles.h: Ditto.
3774 * p-typeprint.c: Ditto.
3775 * p-valprint.c: Ditto.
3777 * printcmd.c: Ditto.
3778 * proc-events.c: Ditto.
3780 * progspace.c: Ditto.
3781 * progspace.h: Ditto.
3782 * psympriv.h: Ditto.
3785 * regcache.c: Ditto.
3786 * regcache.h: Ditto.
3787 * remote-fileio.c: Ditto.
3789 * ser-mingw.c: Ditto.
3791 * ser-unix.c: Ditto.
3794 * solib-frv.c: Ditto.
3795 * solib-irix.c: Ditto.
3796 * solib-osf.c: Ditto.
3797 * solib-pa64.c: Ditto.
3798 * solib-som.c: Ditto.
3799 * solib-sunos.c: Ditto.
3800 * solib-svr4.c: Ditto.
3801 * solib-target.c: Ditto.
3805 * stabsread.c: Ditto.
3806 * stabsread.c: Ditto.
3809 * symfile-mem.c: Ditto.
3815 * target-descriptions.c: Ditto.
3816 * target-memory.c: Ditto.
3819 * terminal.h: Ditto.
3822 * tracepoint.c: Ditto.
3823 * tracepoint.h: Ditto.
3827 * user-regs.c: Ditto.
3828 * user-regs.h: Ditto.
3830 * valarith.c: Ditto.
3832 * valprint.c: Ditto.
3833 * valprint.h: Ditto.
3838 * xcoffread.c: Ditto.
3839 * xcoffsolib.c: Ditto.
3840 * xcoffsolib.h: Ditto.
3841 * xml-syscall.c: Ditto.
3842 * xml-tdesc.c: Ditto.
3844 2011-01-05 Michael Snyder <msnyder@vmware.com>
3846 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
3847 * cli/cli-decode.c: Ditto.
3848 * cli/cli-dump.c: Ditto.
3849 * cli/cli-logging.c: Ditto.
3850 * cli/cli-script.c: Ditto.
3851 * cli/cli-setshow.c: Ditto.
3852 * common/signals.c: Ditto.
3853 * mi/mi-cmd-break.c: Ditto.
3854 * mi/mi-cmd-disas.c: Ditto.
3855 * mi/mi-cmd-stack.c: Ditto.
3856 * mi/mi-cmd-var.c: Ditto.
3857 * mi/mi-cmds.c: Ditto.
3858 * mi/mi-common.h: Ditto.
3859 * mi/mi-console.c: Ditto.
3860 * mi/mi-interp.c: Ditto.
3861 * mi/mi-main.c: Ditto.
3862 * osf-share/cma_attr.c: Ditto.
3863 * osf-share/cma_deb_core.h: Ditto.
3864 * osf-share/cma_debug_client.h: Ditto.
3865 * osf-share/cma_handle.h: Ditto.
3866 * osf-share/cma_mutex.h: Ditto.
3867 * osf-share/cma_stack_int.h: Ditto.
3868 * osf-share/cma_tcb_defs.h: Ditto.
3869 * python/py-auto-load.c: Ditto.
3870 * python/py-breakpoint.c: Ditto.
3871 * python/py-cmd.c: Ditto.
3872 * python/py-frame.c: Ditto.
3873 * python/py-objfile.c: Ditto.
3874 * python/py-param.c: Ditto.
3875 * python/py-progspace.c: Ditto.
3876 * python/py-symbol.c: Ditto.
3877 * python/py-value.c: Ditto.
3878 * python/python-internal.h: Ditto.
3879 * python/python.c: Ditto.
3880 * tui/tui-data.c: Ditto.
3881 * tui/tui-disasm.c: Ditto.
3882 * tui/tui-hooks.c: Ditto.
3883 * tui/tui-io.c: Ditto.
3884 * tui/tui-layout.c: Ditto.
3885 * tui/tui-regs.c: Ditto.
3886 * tui/tui-source.c: Ditto.
3887 * tui/tui-stack.c: Ditto.
3888 * tui/tui-win.c: Ditto.
3889 * tui/tui-windata.c: Ditto.
3890 * tui/tui-winsource.c: Ditto.
3892 2011-01-05 Joel Brobecker <brobecker@adacore.com>
3894 * configure.ac, gdb.1: Copyright year update.
3896 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3898 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
3899 this_pc_in_block, morestack_msym and morestack_name. Check for
3900 "__morestack" minimal symbol there.
3902 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3904 * symfile.c (find_sym_fns): Add call to dont_repeat.
3906 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3908 Copyright year update in most files (performed by copyright.sh).
3910 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3912 * top.c (print_gdb_version): Update copyright year in version output.
3914 For older changes see ChangeLog-2010.
3920 version-control: never