1 /* Reload pseudo regs into hard regs for insns that require hard regs.
2 Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
4 Free Software Foundation, Inc.
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 3, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING3. If not see
20 <http://www.gnu.org/licenses/>. */
24 #include "coretypes.h"
28 #include "hard-reg-set.h"
32 #include "insn-config.h"
38 #include "addresses.h"
39 #include "basic-block.h"
52 /* This file contains the reload pass of the compiler, which is
53 run after register allocation has been done. It checks that
54 each insn is valid (operands required to be in registers really
55 are in registers of the proper class) and fixes up invalid ones
56 by copying values temporarily into registers for the insns
59 The results of register allocation are described by the vector
60 reg_renumber; the insns still contain pseudo regs, but reg_renumber
61 can be used to find which hard reg, if any, a pseudo reg is in.
63 The technique we always use is to free up a few hard regs that are
64 called ``reload regs'', and for each place where a pseudo reg
65 must be in a hard reg, copy it temporarily into one of the reload regs.
67 Reload regs are allocated locally for every instruction that needs
68 reloads. When there are pseudos which are allocated to a register that
69 has been chosen as a reload reg, such pseudos must be ``spilled''.
70 This means that they go to other hard regs, or to stack slots if no other
71 available hard regs can be found. Spilling can invalidate more
72 insns, requiring additional need for reloads, so we must keep checking
73 until the process stabilizes.
75 For machines with different classes of registers, we must keep track
76 of the register class needed for each reload, and make sure that
77 we allocate enough reload registers of each class.
79 The file reload.c contains the code that checks one insn for
80 validity and reports the reloads that it needs. This file
81 is in charge of scanning the entire rtl code, accumulating the
82 reload needs, spilling, assigning reload registers to use for
83 fixing up each insn, and generating the new insns to copy values
84 into the reload registers. */
86 /* During reload_as_needed, element N contains a REG rtx for the hard reg
87 into which reg N has been reloaded (perhaps for a previous insn). */
88 static rtx *reg_last_reload_reg;
90 /* Elt N nonzero if reg_last_reload_reg[N] has been set in this insn
91 for an output reload that stores into reg N. */
92 static regset_head reg_has_output_reload;
94 /* Indicates which hard regs are reload-registers for an output reload
95 in the current insn. */
96 static HARD_REG_SET reg_is_output_reload;
98 /* Element N is the constant value to which pseudo reg N is equivalent,
99 or zero if pseudo reg N is not equivalent to a constant.
100 find_reloads looks at this in order to replace pseudo reg N
101 with the constant it stands for. */
102 rtx *reg_equiv_constant;
104 /* Element N is an invariant value to which pseudo reg N is equivalent.
105 eliminate_regs_in_insn uses this to replace pseudos in particular
107 rtx *reg_equiv_invariant;
109 /* Element N is a memory location to which pseudo reg N is equivalent,
110 prior to any register elimination (such as frame pointer to stack
111 pointer). Depending on whether or not it is a valid address, this value
112 is transferred to either reg_equiv_address or reg_equiv_mem. */
113 rtx *reg_equiv_memory_loc;
115 /* We allocate reg_equiv_memory_loc inside a varray so that the garbage
116 collector can keep track of what is inside. */
117 VEC(rtx,gc) *reg_equiv_memory_loc_vec;
119 /* Element N is the address of stack slot to which pseudo reg N is equivalent.
120 This is used when the address is not valid as a memory address
121 (because its displacement is too big for the machine.) */
122 rtx *reg_equiv_address;
124 /* Element N is the memory slot to which pseudo reg N is equivalent,
125 or zero if pseudo reg N is not equivalent to a memory slot. */
128 /* Element N is an EXPR_LIST of REG_EQUIVs containing MEMs with
129 alternate representations of the location of pseudo reg N. */
130 rtx *reg_equiv_alt_mem_list;
132 /* Widest width in which each pseudo reg is referred to (via subreg). */
133 static unsigned int *reg_max_ref_width;
135 /* Element N is the list of insns that initialized reg N from its equivalent
136 constant or memory slot. */
138 int reg_equiv_init_size;
140 /* Vector to remember old contents of reg_renumber before spilling. */
141 static short *reg_old_renumber;
143 /* During reload_as_needed, element N contains the last pseudo regno reloaded
144 into hard register N. If that pseudo reg occupied more than one register,
145 reg_reloaded_contents points to that pseudo for each spill register in
146 use; all of these must remain set for an inheritance to occur. */
147 static int reg_reloaded_contents[FIRST_PSEUDO_REGISTER];
149 /* During reload_as_needed, element N contains the insn for which
150 hard register N was last used. Its contents are significant only
151 when reg_reloaded_valid is set for this register. */
152 static rtx reg_reloaded_insn[FIRST_PSEUDO_REGISTER];
154 /* Indicate if reg_reloaded_insn / reg_reloaded_contents is valid. */
155 static HARD_REG_SET reg_reloaded_valid;
156 /* Indicate if the register was dead at the end of the reload.
157 This is only valid if reg_reloaded_contents is set and valid. */
158 static HARD_REG_SET reg_reloaded_dead;
160 /* Indicate whether the register's current value is one that is not
161 safe to retain across a call, even for registers that are normally
162 call-saved. This is only meaningful for members of reg_reloaded_valid. */
163 static HARD_REG_SET reg_reloaded_call_part_clobbered;
165 /* Number of spill-regs so far; number of valid elements of spill_regs. */
168 /* In parallel with spill_regs, contains REG rtx's for those regs.
169 Holds the last rtx used for any given reg, or 0 if it has never
170 been used for spilling yet. This rtx is reused, provided it has
172 static rtx spill_reg_rtx[FIRST_PSEUDO_REGISTER];
174 /* In parallel with spill_regs, contains nonzero for a spill reg
175 that was stored after the last time it was used.
176 The precise value is the insn generated to do the store. */
177 static rtx spill_reg_store[FIRST_PSEUDO_REGISTER];
179 /* This is the register that was stored with spill_reg_store. This is a
180 copy of reload_out / reload_out_reg when the value was stored; if
181 reload_out is a MEM, spill_reg_stored_to will be set to reload_out_reg. */
182 static rtx spill_reg_stored_to[FIRST_PSEUDO_REGISTER];
184 /* This table is the inverse mapping of spill_regs:
185 indexed by hard reg number,
186 it contains the position of that reg in spill_regs,
187 or -1 for something that is not in spill_regs.
189 ?!? This is no longer accurate. */
190 static short spill_reg_order[FIRST_PSEUDO_REGISTER];
192 /* This reg set indicates registers that can't be used as spill registers for
193 the currently processed insn. These are the hard registers which are live
194 during the insn, but not allocated to pseudos, as well as fixed
196 static HARD_REG_SET bad_spill_regs;
198 /* These are the hard registers that can't be used as spill register for any
199 insn. This includes registers used for user variables and registers that
200 we can't eliminate. A register that appears in this set also can't be used
201 to retry register allocation. */
202 static HARD_REG_SET bad_spill_regs_global;
204 /* Describes order of use of registers for reloading
205 of spilled pseudo-registers. `n_spills' is the number of
206 elements that are actually valid; new ones are added at the end.
208 Both spill_regs and spill_reg_order are used on two occasions:
209 once during find_reload_regs, where they keep track of the spill registers
210 for a single insn, but also during reload_as_needed where they show all
211 the registers ever used by reload. For the latter case, the information
212 is calculated during finish_spills. */
213 static short spill_regs[FIRST_PSEUDO_REGISTER];
215 /* This vector of reg sets indicates, for each pseudo, which hard registers
216 may not be used for retrying global allocation because the register was
217 formerly spilled from one of them. If we allowed reallocating a pseudo to
218 a register that it was already allocated to, reload might not
220 static HARD_REG_SET *pseudo_previous_regs;
222 /* This vector of reg sets indicates, for each pseudo, which hard
223 registers may not be used for retrying global allocation because they
224 are used as spill registers during one of the insns in which the
226 static HARD_REG_SET *pseudo_forbidden_regs;
228 /* All hard regs that have been used as spill registers for any insn are
229 marked in this set. */
230 static HARD_REG_SET used_spill_regs;
232 /* Index of last register assigned as a spill register. We allocate in
233 a round-robin fashion. */
234 static int last_spill_reg;
236 /* Nonzero if indirect addressing is supported on the machine; this means
237 that spilling (REG n) does not require reloading it into a register in
238 order to do (MEM (REG n)) or (MEM (PLUS (REG n) (CONST_INT c))). The
239 value indicates the level of indirect addressing supported, e.g., two
240 means that (MEM (MEM (REG n))) is also valid if (REG n) does not get
242 static char spill_indirect_levels;
244 /* Nonzero if indirect addressing is supported when the innermost MEM is
245 of the form (MEM (SYMBOL_REF sym)). It is assumed that the level to
246 which these are valid is the same as spill_indirect_levels, above. */
247 char indirect_symref_ok;
249 /* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid. */
250 char double_reg_address_ok;
252 /* Record the stack slot for each spilled hard register. */
253 static rtx spill_stack_slot[FIRST_PSEUDO_REGISTER];
255 /* Width allocated so far for that stack slot. */
256 static unsigned int spill_stack_slot_width[FIRST_PSEUDO_REGISTER];
258 /* Record which pseudos needed to be spilled. */
259 static regset_head spilled_pseudos;
261 /* Record which pseudos changed their allocation in finish_spills. */
262 static regset_head changed_allocation_pseudos;
264 /* Used for communication between order_regs_for_reload and count_pseudo.
265 Used to avoid counting one pseudo twice. */
266 static regset_head pseudos_counted;
268 /* First uid used by insns created by reload in this function.
269 Used in find_equiv_reg. */
270 int reload_first_uid;
272 /* Flag set by local-alloc or global-alloc if anything is live in
273 a call-clobbered reg across calls. */
274 int caller_save_needed;
276 /* Set to 1 while reload_as_needed is operating.
277 Required by some machines to handle any generated moves differently. */
278 int reload_in_progress = 0;
280 /* These arrays record the insn_code of insns that may be needed to
281 perform input and output reloads of special objects. They provide a
282 place to pass a scratch register. */
283 enum insn_code reload_in_optab[NUM_MACHINE_MODES];
284 enum insn_code reload_out_optab[NUM_MACHINE_MODES];
286 /* This obstack is used for allocation of rtl during register elimination.
287 The allocated storage can be freed once find_reloads has processed the
289 static struct obstack reload_obstack;
291 /* Points to the beginning of the reload_obstack. All insn_chain structures
292 are allocated first. */
293 static char *reload_startobj;
295 /* The point after all insn_chain structures. Used to quickly deallocate
296 memory allocated in copy_reloads during calculate_needs_all_insns. */
297 static char *reload_firstobj;
299 /* This points before all local rtl generated by register elimination.
300 Used to quickly free all memory after processing one insn. */
301 static char *reload_insn_firstobj;
303 /* List of insn_chain instructions, one for every insn that reload needs to
305 struct insn_chain *reload_insn_chain;
307 /* List of all insns needing reloads. */
308 static struct insn_chain *insns_need_reload;
310 /* This structure is used to record information about register eliminations.
311 Each array entry describes one possible way of eliminating a register
312 in favor of another. If there is more than one way of eliminating a
313 particular register, the most preferred should be specified first. */
317 int from; /* Register number to be eliminated. */
318 int to; /* Register number used as replacement. */
319 HOST_WIDE_INT initial_offset; /* Initial difference between values. */
320 int can_eliminate; /* Nonzero if this elimination can be done. */
321 int can_eliminate_previous; /* Value of CAN_ELIMINATE in previous scan over
322 insns made by reload. */
323 HOST_WIDE_INT offset; /* Current offset between the two regs. */
324 HOST_WIDE_INT previous_offset;/* Offset at end of previous insn. */
325 int ref_outside_mem; /* "to" has been referenced outside a MEM. */
326 rtx from_rtx; /* REG rtx for the register to be eliminated.
327 We cannot simply compare the number since
328 we might then spuriously replace a hard
329 register corresponding to a pseudo
330 assigned to the reg to be eliminated. */
331 rtx to_rtx; /* REG rtx for the replacement. */
334 static struct elim_table *reg_eliminate = 0;
336 /* This is an intermediate structure to initialize the table. It has
337 exactly the members provided by ELIMINABLE_REGS. */
338 static const struct elim_table_1
342 } reg_eliminate_1[] =
344 /* If a set of eliminable registers was specified, define the table from it.
345 Otherwise, default to the normal case of the frame pointer being
346 replaced by the stack pointer. */
348 #ifdef ELIMINABLE_REGS
351 {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}};
354 #define NUM_ELIMINABLE_REGS ARRAY_SIZE (reg_eliminate_1)
356 /* Record the number of pending eliminations that have an offset not equal
357 to their initial offset. If nonzero, we use a new copy of each
358 replacement result in any insns encountered. */
359 int num_not_at_initial_offset;
361 /* Count the number of registers that we may be able to eliminate. */
362 static int num_eliminable;
363 /* And the number of registers that are equivalent to a constant that
364 can be eliminated to frame_pointer / arg_pointer + constant. */
365 static int num_eliminable_invariants;
367 /* For each label, we record the offset of each elimination. If we reach
368 a label by more than one path and an offset differs, we cannot do the
369 elimination. This information is indexed by the difference of the
370 number of the label and the first label number. We can't offset the
371 pointer itself as this can cause problems on machines with segmented
372 memory. The first table is an array of flags that records whether we
373 have yet encountered a label and the second table is an array of arrays,
374 one entry in the latter array for each elimination. */
376 static int first_label_num;
377 static char *offsets_known_at;
378 static HOST_WIDE_INT (*offsets_at)[NUM_ELIMINABLE_REGS];
380 /* Number of labels in the current function. */
382 static int num_labels;
384 static void replace_pseudos_in (rtx *, enum machine_mode, rtx);
385 static void maybe_fix_stack_asms (void);
386 static void copy_reloads (struct insn_chain *);
387 static void calculate_needs_all_insns (int);
388 static int find_reg (struct insn_chain *, int);
389 static void find_reload_regs (struct insn_chain *);
390 static void select_reload_regs (void);
391 static void delete_caller_save_insns (void);
393 static void spill_failure (rtx, enum reg_class);
394 static void count_spilled_pseudo (int, int, int);
395 static void delete_dead_insn (rtx);
396 static void alter_reg (int, int, bool);
397 static void set_label_offsets (rtx, rtx, int);
398 static void check_eliminable_occurrences (rtx);
399 static void elimination_effects (rtx, enum machine_mode);
400 static int eliminate_regs_in_insn (rtx, int);
401 static void update_eliminable_offsets (void);
402 static void mark_not_eliminable (rtx, const_rtx, void *);
403 static void set_initial_elim_offsets (void);
404 static bool verify_initial_elim_offsets (void);
405 static void set_initial_label_offsets (void);
406 static void set_offsets_for_label (rtx);
407 static void init_elim_table (void);
408 static void update_eliminables (HARD_REG_SET *);
409 static void spill_hard_reg (unsigned int, int);
410 static int finish_spills (int);
411 static void scan_paradoxical_subregs (rtx);
412 static void count_pseudo (int);
413 static void order_regs_for_reload (struct insn_chain *);
414 static void reload_as_needed (int);
415 static void forget_old_reloads_1 (rtx, const_rtx, void *);
416 static void forget_marked_reloads (regset);
417 static int reload_reg_class_lower (const void *, const void *);
418 static void mark_reload_reg_in_use (unsigned int, int, enum reload_type,
420 static void clear_reload_reg_in_use (unsigned int, int, enum reload_type,
422 static int reload_reg_free_p (unsigned int, int, enum reload_type);
423 static int reload_reg_free_for_value_p (int, int, int, enum reload_type,
425 static int free_for_value_p (int, enum machine_mode, int, enum reload_type,
427 static int reload_reg_reaches_end_p (unsigned int, int, enum reload_type);
428 static int allocate_reload_reg (struct insn_chain *, int, int);
429 static int conflicts_with_override (rtx);
430 static void failed_reload (rtx, int);
431 static int set_reload_reg (int, int);
432 static void choose_reload_regs_init (struct insn_chain *, rtx *);
433 static void choose_reload_regs (struct insn_chain *);
434 static void merge_assigned_reloads (rtx);
435 static void emit_input_reload_insns (struct insn_chain *, struct reload *,
437 static void emit_output_reload_insns (struct insn_chain *, struct reload *,
439 static void do_input_reload (struct insn_chain *, struct reload *, int);
440 static void do_output_reload (struct insn_chain *, struct reload *, int);
441 static void emit_reload_insns (struct insn_chain *);
442 static void delete_output_reload (rtx, int, int, rtx);
443 static void delete_address_reloads (rtx, rtx);
444 static void delete_address_reloads_1 (rtx, rtx, rtx);
445 static rtx inc_for_reload (rtx, rtx, rtx, int);
447 static void add_auto_inc_notes (rtx, rtx);
449 static void copy_eh_notes (rtx, rtx);
450 static void substitute (rtx *, const_rtx, rtx);
451 static bool gen_reload_chain_without_interm_reg_p (int, int);
452 static int reloads_conflict (int, int);
453 static rtx gen_reload (rtx, rtx, int, enum reload_type);
454 static rtx emit_insn_if_valid_for_reload (rtx);
456 /* Initialize the reload pass. This is called at the beginning of compilation
457 and may be called again if the target is reinitialized. */
464 /* Often (MEM (REG n)) is still valid even if (REG n) is put on the stack.
465 Set spill_indirect_levels to the number of levels such addressing is
466 permitted, zero if it is not permitted at all. */
469 = gen_rtx_MEM (Pmode,
472 LAST_VIRTUAL_REGISTER + 1),
474 spill_indirect_levels = 0;
476 while (memory_address_p (QImode, tem))
478 spill_indirect_levels++;
479 tem = gen_rtx_MEM (Pmode, tem);
482 /* See if indirect addressing is valid for (MEM (SYMBOL_REF ...)). */
484 tem = gen_rtx_MEM (Pmode, gen_rtx_SYMBOL_REF (Pmode, "foo"));
485 indirect_symref_ok = memory_address_p (QImode, tem);
487 /* See if reg+reg is a valid (and offsettable) address. */
489 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
491 tem = gen_rtx_PLUS (Pmode,
492 gen_rtx_REG (Pmode, HARD_FRAME_POINTER_REGNUM),
493 gen_rtx_REG (Pmode, i));
495 /* This way, we make sure that reg+reg is an offsettable address. */
496 tem = plus_constant (tem, 4);
498 if (memory_address_p (QImode, tem))
500 double_reg_address_ok = 1;
505 /* Initialize obstack for our rtl allocation. */
506 gcc_obstack_init (&reload_obstack);
507 reload_startobj = XOBNEWVAR (&reload_obstack, char, 0);
509 INIT_REG_SET (&spilled_pseudos);
510 INIT_REG_SET (&changed_allocation_pseudos);
511 INIT_REG_SET (&pseudos_counted);
514 /* List of insn chains that are currently unused. */
515 static struct insn_chain *unused_insn_chains = 0;
517 /* Allocate an empty insn_chain structure. */
519 new_insn_chain (void)
521 struct insn_chain *c;
523 if (unused_insn_chains == 0)
525 c = XOBNEW (&reload_obstack, struct insn_chain);
526 INIT_REG_SET (&c->live_throughout);
527 INIT_REG_SET (&c->dead_or_set);
531 c = unused_insn_chains;
532 unused_insn_chains = c->next;
534 c->is_caller_save_insn = 0;
535 c->need_operand_change = 0;
541 /* Small utility function to set all regs in hard reg set TO which are
542 allocated to pseudos in regset FROM. */
545 compute_use_by_pseudos (HARD_REG_SET *to, regset from)
548 reg_set_iterator rsi;
550 EXECUTE_IF_SET_IN_REG_SET (from, FIRST_PSEUDO_REGISTER, regno, rsi)
552 int r = reg_renumber[regno];
556 /* reload_combine uses the information from DF_LIVE_IN,
557 which might still contain registers that have not
558 actually been allocated since they have an
560 gcc_assert (ira_conflicts_p || reload_completed);
563 add_to_hard_reg_set (to, PSEUDO_REGNO_MODE (regno), r);
567 /* Replace all pseudos found in LOC with their corresponding
571 replace_pseudos_in (rtx *loc, enum machine_mode mem_mode, rtx usage)
584 unsigned int regno = REGNO (x);
586 if (regno < FIRST_PSEUDO_REGISTER)
589 x = eliminate_regs (x, mem_mode, usage);
593 replace_pseudos_in (loc, mem_mode, usage);
597 if (reg_equiv_constant[regno])
598 *loc = reg_equiv_constant[regno];
599 else if (reg_equiv_mem[regno])
600 *loc = reg_equiv_mem[regno];
601 else if (reg_equiv_address[regno])
602 *loc = gen_rtx_MEM (GET_MODE (x), reg_equiv_address[regno]);
605 gcc_assert (!REG_P (regno_reg_rtx[regno])
606 || REGNO (regno_reg_rtx[regno]) != regno);
607 *loc = regno_reg_rtx[regno];
612 else if (code == MEM)
614 replace_pseudos_in (& XEXP (x, 0), GET_MODE (x), usage);
618 /* Process each of our operands recursively. */
619 fmt = GET_RTX_FORMAT (code);
620 for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
622 replace_pseudos_in (&XEXP (x, i), mem_mode, usage);
623 else if (*fmt == 'E')
624 for (j = 0; j < XVECLEN (x, i); j++)
625 replace_pseudos_in (& XVECEXP (x, i, j), mem_mode, usage);
628 /* Determine if the current function has an exception receiver block
629 that reaches the exit block via non-exceptional edges */
632 has_nonexceptional_receiver (void)
636 basic_block *tos, *worklist, bb;
638 /* If we're not optimizing, then just err on the safe side. */
642 /* First determine which blocks can reach exit via normal paths. */
643 tos = worklist = XNEWVEC (basic_block, n_basic_blocks + 1);
646 bb->flags &= ~BB_REACHABLE;
648 /* Place the exit block on our worklist. */
649 EXIT_BLOCK_PTR->flags |= BB_REACHABLE;
650 *tos++ = EXIT_BLOCK_PTR;
652 /* Iterate: find everything reachable from what we've already seen. */
653 while (tos != worklist)
657 FOR_EACH_EDGE (e, ei, bb->preds)
658 if (!(e->flags & EDGE_ABNORMAL))
660 basic_block src = e->src;
662 if (!(src->flags & BB_REACHABLE))
664 src->flags |= BB_REACHABLE;
671 /* Now see if there's a reachable block with an exceptional incoming
674 if (bb->flags & BB_REACHABLE)
675 FOR_EACH_EDGE (e, ei, bb->preds)
676 if (e->flags & EDGE_ABNORMAL)
679 /* No exceptional block reached exit unexceptionally. */
684 /* Global variables used by reload and its subroutines. */
686 /* Set during calculate_needs if an insn needs register elimination. */
687 static int something_needs_elimination;
688 /* Set during calculate_needs if an insn needs an operand changed. */
689 static int something_needs_operands_changed;
691 /* Nonzero means we couldn't get enough spill regs. */
694 /* Temporary array of pseudo-register number. */
695 static int *temp_pseudo_reg_arr;
697 /* Main entry point for the reload pass.
699 FIRST is the first insn of the function being compiled.
701 GLOBAL nonzero means we were called from global_alloc
702 and should attempt to reallocate any pseudoregs that we
703 displace from hard regs we will use for reloads.
704 If GLOBAL is zero, we do not have enough information to do that,
705 so any pseudo reg that is spilled must go to the stack.
707 Return value is nonzero if reload failed
708 and we must not do any more for this function. */
711 reload (rtx first, int global)
715 struct elim_table *ep;
718 /* Make sure even insns with volatile mem refs are recognizable. */
723 reload_firstobj = XOBNEWVAR (&reload_obstack, char, 0);
725 /* Make sure that the last insn in the chain
726 is not something that needs reloading. */
727 emit_note (NOTE_INSN_DELETED);
729 /* Enable find_equiv_reg to distinguish insns made by reload. */
730 reload_first_uid = get_max_uid ();
732 #ifdef SECONDARY_MEMORY_NEEDED
733 /* Initialize the secondary memory table. */
734 clear_secondary_mem ();
737 /* We don't have a stack slot for any spill reg yet. */
738 memset (spill_stack_slot, 0, sizeof spill_stack_slot);
739 memset (spill_stack_slot_width, 0, sizeof spill_stack_slot_width);
741 /* Initialize the save area information for caller-save, in case some
745 /* Compute which hard registers are now in use
746 as homes for pseudo registers.
747 This is done here rather than (eg) in global_alloc
748 because this point is reached even if not optimizing. */
749 for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
752 /* A function that has a nonlocal label that can reach the exit
753 block via non-exceptional paths must save all call-saved
755 if (cfun->has_nonlocal_label
756 && has_nonexceptional_receiver ())
757 crtl->saves_all_registers = 1;
759 if (crtl->saves_all_registers)
760 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
761 if (! call_used_regs[i] && ! fixed_regs[i] && ! LOCAL_REGNO (i))
762 df_set_regs_ever_live (i, true);
764 /* Find all the pseudo registers that didn't get hard regs
765 but do have known equivalent constants or memory slots.
766 These include parameters (known equivalent to parameter slots)
767 and cse'd or loop-moved constant memory addresses.
769 Record constant equivalents in reg_equiv_constant
770 so they will be substituted by find_reloads.
771 Record memory equivalents in reg_mem_equiv so they can
772 be substituted eventually by altering the REG-rtx's. */
774 reg_equiv_constant = XCNEWVEC (rtx, max_regno);
775 reg_equiv_invariant = XCNEWVEC (rtx, max_regno);
776 reg_equiv_mem = XCNEWVEC (rtx, max_regno);
777 reg_equiv_alt_mem_list = XCNEWVEC (rtx, max_regno);
778 reg_equiv_address = XCNEWVEC (rtx, max_regno);
779 reg_max_ref_width = XCNEWVEC (unsigned int, max_regno);
780 reg_old_renumber = XCNEWVEC (short, max_regno);
781 memcpy (reg_old_renumber, reg_renumber, max_regno * sizeof (short));
782 pseudo_forbidden_regs = XNEWVEC (HARD_REG_SET, max_regno);
783 pseudo_previous_regs = XCNEWVEC (HARD_REG_SET, max_regno);
785 CLEAR_HARD_REG_SET (bad_spill_regs_global);
787 /* Look for REG_EQUIV notes; record what each pseudo is equivalent
788 to. Also find all paradoxical subregs and find largest such for
791 num_eliminable_invariants = 0;
792 for (insn = first; insn; insn = NEXT_INSN (insn))
794 rtx set = single_set (insn);
796 /* We may introduce USEs that we want to remove at the end, so
797 we'll mark them with QImode. Make sure there are no
798 previously-marked insns left by say regmove. */
799 if (INSN_P (insn) && GET_CODE (PATTERN (insn)) == USE
800 && GET_MODE (insn) != VOIDmode)
801 PUT_MODE (insn, VOIDmode);
804 scan_paradoxical_subregs (PATTERN (insn));
806 if (set != 0 && REG_P (SET_DEST (set)))
808 rtx note = find_reg_note (insn, REG_EQUIV, NULL_RTX);
814 i = REGNO (SET_DEST (set));
817 if (i <= LAST_VIRTUAL_REGISTER)
820 if (! function_invariant_p (x)
822 /* A function invariant is often CONSTANT_P but may
823 include a register. We promise to only pass
824 CONSTANT_P objects to LEGITIMATE_PIC_OPERAND_P. */
826 && LEGITIMATE_PIC_OPERAND_P (x)))
828 /* It can happen that a REG_EQUIV note contains a MEM
829 that is not a legitimate memory operand. As later
830 stages of reload assume that all addresses found
831 in the reg_equiv_* arrays were originally legitimate,
832 we ignore such REG_EQUIV notes. */
833 if (memory_operand (x, VOIDmode))
835 /* Always unshare the equivalence, so we can
836 substitute into this insn without touching the
838 reg_equiv_memory_loc[i] = copy_rtx (x);
840 else if (function_invariant_p (x))
842 if (GET_CODE (x) == PLUS)
844 /* This is PLUS of frame pointer and a constant,
845 and might be shared. Unshare it. */
846 reg_equiv_invariant[i] = copy_rtx (x);
847 num_eliminable_invariants++;
849 else if (x == frame_pointer_rtx || x == arg_pointer_rtx)
851 reg_equiv_invariant[i] = x;
852 num_eliminable_invariants++;
854 else if (LEGITIMATE_CONSTANT_P (x))
855 reg_equiv_constant[i] = x;
858 reg_equiv_memory_loc[i]
859 = force_const_mem (GET_MODE (SET_DEST (set)), x);
860 if (! reg_equiv_memory_loc[i])
861 reg_equiv_init[i] = NULL_RTX;
866 reg_equiv_init[i] = NULL_RTX;
871 reg_equiv_init[i] = NULL_RTX;
876 for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
877 if (reg_equiv_init[i])
879 fprintf (dump_file, "init_insns for %u: ", i);
880 print_inline_rtx (dump_file, reg_equiv_init[i], 20);
881 fprintf (dump_file, "\n");
886 first_label_num = get_first_label_num ();
887 num_labels = max_label_num () - first_label_num;
889 /* Allocate the tables used to store offset information at labels. */
890 /* We used to use alloca here, but the size of what it would try to
891 allocate would occasionally cause it to exceed the stack limit and
892 cause a core dump. */
893 offsets_known_at = XNEWVEC (char, num_labels);
894 offsets_at = (HOST_WIDE_INT (*)[NUM_ELIMINABLE_REGS]) xmalloc (num_labels * NUM_ELIMINABLE_REGS * sizeof (HOST_WIDE_INT));
896 /* Alter each pseudo-reg rtx to contain its hard reg number. Assign
897 stack slots to the pseudos that lack hard regs or equivalents.
898 Do not touch virtual registers. */
900 temp_pseudo_reg_arr = XNEWVEC (int, max_regno - LAST_VIRTUAL_REGISTER - 1);
901 for (n = 0, i = LAST_VIRTUAL_REGISTER + 1; i < max_regno; i++)
902 temp_pseudo_reg_arr[n++] = i;
905 /* Ask IRA to order pseudo-registers for better stack slot
907 ira_sort_regnos_for_alter_reg (temp_pseudo_reg_arr, n, reg_max_ref_width);
909 for (i = 0; i < n; i++)
910 alter_reg (temp_pseudo_reg_arr[i], -1, false);
912 /* If we have some registers we think can be eliminated, scan all insns to
913 see if there is an insn that sets one of these registers to something
914 other than itself plus a constant. If so, the register cannot be
915 eliminated. Doing this scan here eliminates an extra pass through the
916 main reload loop in the most common case where register elimination
918 for (insn = first; insn && num_eliminable; insn = NEXT_INSN (insn))
920 note_stores (PATTERN (insn), mark_not_eliminable, NULL);
922 maybe_fix_stack_asms ();
924 insns_need_reload = 0;
925 something_needs_elimination = 0;
927 /* Initialize to -1, which means take the first spill register. */
930 /* Spill any hard regs that we know we can't eliminate. */
931 CLEAR_HARD_REG_SET (used_spill_regs);
932 /* There can be multiple ways to eliminate a register;
933 they should be listed adjacently.
934 Elimination for any register fails only if all possible ways fail. */
935 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; )
938 int can_eliminate = 0;
941 can_eliminate |= ep->can_eliminate;
944 while (ep < ®_eliminate[NUM_ELIMINABLE_REGS] && ep->from == from);
946 spill_hard_reg (from, 1);
949 #if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
950 if (frame_pointer_needed)
951 spill_hard_reg (HARD_FRAME_POINTER_REGNUM, 1);
953 finish_spills (global);
955 /* From now on, we may need to generate moves differently. We may also
956 allow modifications of insns which cause them to not be recognized.
957 Any such modifications will be cleaned up during reload itself. */
958 reload_in_progress = 1;
960 /* This loop scans the entire function each go-round
961 and repeats until one repetition spills no additional hard regs. */
964 int something_changed;
966 HOST_WIDE_INT starting_frame_size;
968 starting_frame_size = get_frame_size ();
970 set_initial_elim_offsets ();
971 set_initial_label_offsets ();
973 /* For each pseudo register that has an equivalent location defined,
974 try to eliminate any eliminable registers (such as the frame pointer)
975 assuming initial offsets for the replacement register, which
978 If the resulting location is directly addressable, substitute
979 the MEM we just got directly for the old REG.
981 If it is not addressable but is a constant or the sum of a hard reg
982 and constant, it is probably not addressable because the constant is
983 out of range, in that case record the address; we will generate
984 hairy code to compute the address in a register each time it is
985 needed. Similarly if it is a hard register, but one that is not
986 valid as an address register.
988 If the location is not addressable, but does not have one of the
989 above forms, assign a stack slot. We have to do this to avoid the
990 potential of producing lots of reloads if, e.g., a location involves
991 a pseudo that didn't get a hard register and has an equivalent memory
992 location that also involves a pseudo that didn't get a hard register.
994 Perhaps at some point we will improve reload_when_needed handling
995 so this problem goes away. But that's very hairy. */
997 for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
998 if (reg_renumber[i] < 0 && reg_equiv_memory_loc[i])
1000 rtx x = eliminate_regs (reg_equiv_memory_loc[i], VOIDmode,
1003 if (strict_memory_address_p (GET_MODE (regno_reg_rtx[i]),
1005 reg_equiv_mem[i] = x, reg_equiv_address[i] = 0;
1006 else if (CONSTANT_P (XEXP (x, 0))
1007 || (REG_P (XEXP (x, 0))
1008 && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)
1009 || (GET_CODE (XEXP (x, 0)) == PLUS
1010 && REG_P (XEXP (XEXP (x, 0), 0))
1011 && (REGNO (XEXP (XEXP (x, 0), 0))
1012 < FIRST_PSEUDO_REGISTER)
1013 && CONSTANT_P (XEXP (XEXP (x, 0), 1))))
1014 reg_equiv_address[i] = XEXP (x, 0), reg_equiv_mem[i] = 0;
1017 /* Make a new stack slot. Then indicate that something
1018 changed so we go back and recompute offsets for
1019 eliminable registers because the allocation of memory
1020 below might change some offset. reg_equiv_{mem,address}
1021 will be set up for this pseudo on the next pass around
1023 reg_equiv_memory_loc[i] = 0;
1024 reg_equiv_init[i] = 0;
1025 alter_reg (i, -1, true);
1029 if (caller_save_needed)
1030 setup_save_areas ();
1032 /* If we allocated another stack slot, redo elimination bookkeeping. */
1033 if (starting_frame_size != get_frame_size ())
1035 if (starting_frame_size && crtl->stack_alignment_needed)
1037 /* If we have a stack frame, we must align it now. The
1038 stack size may be a part of the offset computation for
1039 register elimination. So if this changes the stack size,
1040 then repeat the elimination bookkeeping. We don't
1041 realign when there is no stack, as that will cause a
1042 stack frame when none is needed should
1043 STARTING_FRAME_OFFSET not be already aligned to
1045 assign_stack_local (BLKmode, 0, crtl->stack_alignment_needed);
1046 if (starting_frame_size != get_frame_size ())
1050 if (caller_save_needed)
1052 save_call_clobbered_regs ();
1053 /* That might have allocated new insn_chain structures. */
1054 reload_firstobj = XOBNEWVAR (&reload_obstack, char, 0);
1057 calculate_needs_all_insns (global);
1059 if (! ira_conflicts_p)
1060 /* Don't do it for IRA. We need this info because we don't
1061 change live_throughout and dead_or_set for chains when IRA
1063 CLEAR_REG_SET (&spilled_pseudos);
1067 something_changed = 0;
1069 /* If we allocated any new memory locations, make another pass
1070 since it might have changed elimination offsets. */
1071 if (starting_frame_size != get_frame_size ())
1072 something_changed = 1;
1074 /* Even if the frame size remained the same, we might still have
1075 changed elimination offsets, e.g. if find_reloads called
1076 force_const_mem requiring the back end to allocate a constant
1077 pool base register that needs to be saved on the stack. */
1078 else if (!verify_initial_elim_offsets ())
1079 something_changed = 1;
1082 HARD_REG_SET to_spill;
1083 CLEAR_HARD_REG_SET (to_spill);
1084 update_eliminables (&to_spill);
1085 AND_COMPL_HARD_REG_SET (used_spill_regs, to_spill);
1087 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1088 if (TEST_HARD_REG_BIT (to_spill, i))
1090 spill_hard_reg (i, 1);
1093 /* Regardless of the state of spills, if we previously had
1094 a register that we thought we could eliminate, but now can
1095 not eliminate, we must run another pass.
1097 Consider pseudos which have an entry in reg_equiv_* which
1098 reference an eliminable register. We must make another pass
1099 to update reg_equiv_* so that we do not substitute in the
1100 old value from when we thought the elimination could be
1102 something_changed = 1;
1106 select_reload_regs ();
1110 if (insns_need_reload != 0 || did_spill)
1111 something_changed |= finish_spills (global);
1113 if (! something_changed)
1116 if (caller_save_needed)
1117 delete_caller_save_insns ();
1119 obstack_free (&reload_obstack, reload_firstobj);
1122 /* If global-alloc was run, notify it of any register eliminations we have
1125 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
1126 if (ep->can_eliminate)
1127 mark_elimination (ep->from, ep->to);
1129 /* If a pseudo has no hard reg, delete the insns that made the equivalence.
1130 If that insn didn't set the register (i.e., it copied the register to
1131 memory), just delete that insn instead of the equivalencing insn plus
1132 anything now dead. If we call delete_dead_insn on that insn, we may
1133 delete the insn that actually sets the register if the register dies
1134 there and that is incorrect. */
1136 for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
1138 if (reg_renumber[i] < 0 && reg_equiv_init[i] != 0)
1141 for (list = reg_equiv_init[i]; list; list = XEXP (list, 1))
1143 rtx equiv_insn = XEXP (list, 0);
1145 /* If we already deleted the insn or if it may trap, we can't
1146 delete it. The latter case shouldn't happen, but can
1147 if an insn has a variable address, gets a REG_EH_REGION
1148 note added to it, and then gets converted into a load
1149 from a constant address. */
1150 if (NOTE_P (equiv_insn)
1151 || can_throw_internal (equiv_insn))
1153 else if (reg_set_p (regno_reg_rtx[i], PATTERN (equiv_insn)))
1154 delete_dead_insn (equiv_insn);
1156 SET_INSN_DELETED (equiv_insn);
1161 /* Use the reload registers where necessary
1162 by generating move instructions to move the must-be-register
1163 values into or out of the reload registers. */
1165 if (insns_need_reload != 0 || something_needs_elimination
1166 || something_needs_operands_changed)
1168 HOST_WIDE_INT old_frame_size = get_frame_size ();
1170 reload_as_needed (global);
1172 gcc_assert (old_frame_size == get_frame_size ());
1174 gcc_assert (verify_initial_elim_offsets ());
1177 /* If we were able to eliminate the frame pointer, show that it is no
1178 longer live at the start of any basic block. If it ls live by
1179 virtue of being in a pseudo, that pseudo will be marked live
1180 and hence the frame pointer will be known to be live via that
1183 if (! frame_pointer_needed)
1185 bitmap_clear_bit (df_get_live_in (bb), HARD_FRAME_POINTER_REGNUM);
1187 /* Come here (with failure set nonzero) if we can't get enough spill
1191 CLEAR_REG_SET (&changed_allocation_pseudos);
1192 CLEAR_REG_SET (&spilled_pseudos);
1193 reload_in_progress = 0;
1195 /* Now eliminate all pseudo regs by modifying them into
1196 their equivalent memory references.
1197 The REG-rtx's for the pseudos are modified in place,
1198 so all insns that used to refer to them now refer to memory.
1200 For a reg that has a reg_equiv_address, all those insns
1201 were changed by reloading so that no insns refer to it any longer;
1202 but the DECL_RTL of a variable decl may refer to it,
1203 and if so this causes the debugging info to mention the variable. */
1205 for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
1209 if (reg_equiv_mem[i])
1210 addr = XEXP (reg_equiv_mem[i], 0);
1212 if (reg_equiv_address[i])
1213 addr = reg_equiv_address[i];
1217 if (reg_renumber[i] < 0)
1219 rtx reg = regno_reg_rtx[i];
1221 REG_USERVAR_P (reg) = 0;
1222 PUT_CODE (reg, MEM);
1223 XEXP (reg, 0) = addr;
1224 if (reg_equiv_memory_loc[i])
1225 MEM_COPY_ATTRIBUTES (reg, reg_equiv_memory_loc[i]);
1228 MEM_IN_STRUCT_P (reg) = MEM_SCALAR_P (reg) = 0;
1229 MEM_ATTRS (reg) = 0;
1231 MEM_NOTRAP_P (reg) = 1;
1233 else if (reg_equiv_mem[i])
1234 XEXP (reg_equiv_mem[i], 0) = addr;
1238 /* We must set reload_completed now since the cleanup_subreg_operands call
1239 below will re-recognize each insn and reload may have generated insns
1240 which are only valid during and after reload. */
1241 reload_completed = 1;
1243 /* Make a pass over all the insns and delete all USEs which we inserted
1244 only to tag a REG_EQUAL note on them. Remove all REG_DEAD and REG_UNUSED
1245 notes. Delete all CLOBBER insns, except those that refer to the return
1246 value and the special mem:BLK CLOBBERs added to prevent the scheduler
1247 from misarranging variable-array code, and simplify (subreg (reg))
1248 operands. Strip and regenerate REG_INC notes that may have been moved
1251 for (insn = first; insn; insn = NEXT_INSN (insn))
1257 replace_pseudos_in (& CALL_INSN_FUNCTION_USAGE (insn),
1258 VOIDmode, CALL_INSN_FUNCTION_USAGE (insn));
1260 if ((GET_CODE (PATTERN (insn)) == USE
1261 /* We mark with QImode USEs introduced by reload itself. */
1262 && (GET_MODE (insn) == QImode
1263 || find_reg_note (insn, REG_EQUAL, NULL_RTX)))
1264 || (GET_CODE (PATTERN (insn)) == CLOBBER
1265 && (!MEM_P (XEXP (PATTERN (insn), 0))
1266 || GET_MODE (XEXP (PATTERN (insn), 0)) != BLKmode
1267 || (GET_CODE (XEXP (XEXP (PATTERN (insn), 0), 0)) != SCRATCH
1268 && XEXP (XEXP (PATTERN (insn), 0), 0)
1269 != stack_pointer_rtx))
1270 && (!REG_P (XEXP (PATTERN (insn), 0))
1271 || ! REG_FUNCTION_VALUE_P (XEXP (PATTERN (insn), 0)))))
1277 /* Some CLOBBERs may survive until here and still reference unassigned
1278 pseudos with const equivalent, which may in turn cause ICE in later
1279 passes if the reference remains in place. */
1280 if (GET_CODE (PATTERN (insn)) == CLOBBER)
1281 replace_pseudos_in (& XEXP (PATTERN (insn), 0),
1282 VOIDmode, PATTERN (insn));
1284 /* Discard obvious no-ops, even without -O. This optimization
1285 is fast and doesn't interfere with debugging. */
1286 if (NONJUMP_INSN_P (insn)
1287 && GET_CODE (PATTERN (insn)) == SET
1288 && REG_P (SET_SRC (PATTERN (insn)))
1289 && REG_P (SET_DEST (PATTERN (insn)))
1290 && (REGNO (SET_SRC (PATTERN (insn)))
1291 == REGNO (SET_DEST (PATTERN (insn)))))
1297 pnote = ®_NOTES (insn);
1300 if (REG_NOTE_KIND (*pnote) == REG_DEAD
1301 || REG_NOTE_KIND (*pnote) == REG_UNUSED
1302 || REG_NOTE_KIND (*pnote) == REG_INC)
1303 *pnote = XEXP (*pnote, 1);
1305 pnote = &XEXP (*pnote, 1);
1309 add_auto_inc_notes (insn, PATTERN (insn));
1312 /* Simplify (subreg (reg)) if it appears as an operand. */
1313 cleanup_subreg_operands (insn);
1315 /* Clean up invalid ASMs so that they don't confuse later passes.
1317 if (asm_noperands (PATTERN (insn)) >= 0)
1319 extract_insn (insn);
1320 if (!constrain_operands (1))
1322 error_for_asm (insn,
1323 "%<asm%> operand has impossible constraints");
1330 /* If we are doing generic stack checking, give a warning if this
1331 function's frame size is larger than we expect. */
1332 if (flag_stack_check == GENERIC_STACK_CHECK)
1334 HOST_WIDE_INT size = get_frame_size () + STACK_CHECK_FIXED_FRAME_SIZE;
1335 static int verbose_warned = 0;
1337 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1338 if (df_regs_ever_live_p (i) && ! fixed_regs[i] && call_used_regs[i])
1339 size += UNITS_PER_WORD;
1341 if (size > STACK_CHECK_MAX_FRAME_SIZE)
1343 warning (0, "frame size too large for reliable stack checking");
1344 if (! verbose_warned)
1346 warning (0, "try reducing the number of local variables");
1352 /* Indicate that we no longer have known memory locations or constants. */
1353 if (reg_equiv_constant)
1354 free (reg_equiv_constant);
1355 if (reg_equiv_invariant)
1356 free (reg_equiv_invariant);
1357 reg_equiv_constant = 0;
1358 reg_equiv_invariant = 0;
1359 VEC_free (rtx, gc, reg_equiv_memory_loc_vec);
1360 reg_equiv_memory_loc = 0;
1362 free (temp_pseudo_reg_arr);
1364 if (offsets_known_at)
1365 free (offsets_known_at);
1369 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1370 if (reg_equiv_alt_mem_list[i])
1371 free_EXPR_LIST_list (®_equiv_alt_mem_list[i]);
1372 free (reg_equiv_alt_mem_list);
1374 free (reg_equiv_mem);
1376 free (reg_equiv_address);
1377 free (reg_max_ref_width);
1378 free (reg_old_renumber);
1379 free (pseudo_previous_regs);
1380 free (pseudo_forbidden_regs);
1382 CLEAR_HARD_REG_SET (used_spill_regs);
1383 for (i = 0; i < n_spills; i++)
1384 SET_HARD_REG_BIT (used_spill_regs, spill_regs[i]);
1386 /* Free all the insn_chain structures at once. */
1387 obstack_free (&reload_obstack, reload_startobj);
1388 unused_insn_chains = 0;
1389 fixup_abnormal_edges ();
1391 /* Replacing pseudos with their memory equivalents might have
1392 created shared rtx. Subsequent passes would get confused
1393 by this, so unshare everything here. */
1394 unshare_all_rtl_again (first);
1396 #ifdef STACK_BOUNDARY
1397 /* init_emit has set the alignment of the hard frame pointer
1398 to STACK_BOUNDARY. It is very likely no longer valid if
1399 the hard frame pointer was used for register allocation. */
1400 if (!frame_pointer_needed)
1401 REGNO_POINTER_ALIGN (HARD_FRAME_POINTER_REGNUM) = BITS_PER_UNIT;
1407 /* Yet another special case. Unfortunately, reg-stack forces people to
1408 write incorrect clobbers in asm statements. These clobbers must not
1409 cause the register to appear in bad_spill_regs, otherwise we'll call
1410 fatal_insn later. We clear the corresponding regnos in the live
1411 register sets to avoid this.
1412 The whole thing is rather sick, I'm afraid. */
1415 maybe_fix_stack_asms (void)
1418 const char *constraints[MAX_RECOG_OPERANDS];
1419 enum machine_mode operand_mode[MAX_RECOG_OPERANDS];
1420 struct insn_chain *chain;
1422 for (chain = reload_insn_chain; chain != 0; chain = chain->next)
1425 HARD_REG_SET clobbered, allowed;
1428 if (! INSN_P (chain->insn)
1429 || (noperands = asm_noperands (PATTERN (chain->insn))) < 0)
1431 pat = PATTERN (chain->insn);
1432 if (GET_CODE (pat) != PARALLEL)
1435 CLEAR_HARD_REG_SET (clobbered);
1436 CLEAR_HARD_REG_SET (allowed);
1438 /* First, make a mask of all stack regs that are clobbered. */
1439 for (i = 0; i < XVECLEN (pat, 0); i++)
1441 rtx t = XVECEXP (pat, 0, i);
1442 if (GET_CODE (t) == CLOBBER && STACK_REG_P (XEXP (t, 0)))
1443 SET_HARD_REG_BIT (clobbered, REGNO (XEXP (t, 0)));
1446 /* Get the operand values and constraints out of the insn. */
1447 decode_asm_operands (pat, recog_data.operand, recog_data.operand_loc,
1448 constraints, operand_mode, NULL);
1450 /* For every operand, see what registers are allowed. */
1451 for (i = 0; i < noperands; i++)
1453 const char *p = constraints[i];
1454 /* For every alternative, we compute the class of registers allowed
1455 for reloading in CLS, and merge its contents into the reg set
1457 int cls = (int) NO_REGS;
1463 if (c == '\0' || c == ',' || c == '#')
1465 /* End of one alternative - mark the regs in the current
1466 class, and reset the class. */
1467 IOR_HARD_REG_SET (allowed, reg_class_contents[cls]);
1473 } while (c != '\0' && c != ',');
1481 case '=': case '+': case '*': case '%': case '?': case '!':
1482 case '0': case '1': case '2': case '3': case '4': case '<':
1483 case '>': case 'V': case 'o': case '&': case 'E': case 'F':
1484 case 's': case 'i': case 'n': case 'X': case 'I': case 'J':
1485 case 'K': case 'L': case 'M': case 'N': case 'O': case 'P':
1486 case TARGET_MEM_CONSTRAINT:
1490 cls = (int) reg_class_subunion[cls]
1491 [(int) base_reg_class (VOIDmode, ADDRESS, SCRATCH)];
1496 cls = (int) reg_class_subunion[cls][(int) GENERAL_REGS];
1500 if (EXTRA_ADDRESS_CONSTRAINT (c, p))
1501 cls = (int) reg_class_subunion[cls]
1502 [(int) base_reg_class (VOIDmode, ADDRESS, SCRATCH)];
1504 cls = (int) reg_class_subunion[cls]
1505 [(int) REG_CLASS_FROM_CONSTRAINT (c, p)];
1507 p += CONSTRAINT_LEN (c, p);
1510 /* Those of the registers which are clobbered, but allowed by the
1511 constraints, must be usable as reload registers. So clear them
1512 out of the life information. */
1513 AND_HARD_REG_SET (allowed, clobbered);
1514 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1515 if (TEST_HARD_REG_BIT (allowed, i))
1517 CLEAR_REGNO_REG_SET (&chain->live_throughout, i);
1518 CLEAR_REGNO_REG_SET (&chain->dead_or_set, i);
1525 /* Copy the global variables n_reloads and rld into the corresponding elts
1528 copy_reloads (struct insn_chain *chain)
1530 chain->n_reloads = n_reloads;
1531 chain->rld = XOBNEWVEC (&reload_obstack, struct reload, n_reloads);
1532 memcpy (chain->rld, rld, n_reloads * sizeof (struct reload));
1533 reload_insn_firstobj = XOBNEWVAR (&reload_obstack, char, 0);
1536 /* Walk the chain of insns, and determine for each whether it needs reloads
1537 and/or eliminations. Build the corresponding insns_need_reload list, and
1538 set something_needs_elimination as appropriate. */
1540 calculate_needs_all_insns (int global)
1542 struct insn_chain **pprev_reload = &insns_need_reload;
1543 struct insn_chain *chain, *next = 0;
1545 something_needs_elimination = 0;
1547 reload_insn_firstobj = XOBNEWVAR (&reload_obstack, char, 0);
1548 for (chain = reload_insn_chain; chain != 0; chain = next)
1550 rtx insn = chain->insn;
1554 /* Clear out the shortcuts. */
1555 chain->n_reloads = 0;
1556 chain->need_elim = 0;
1557 chain->need_reload = 0;
1558 chain->need_operand_change = 0;
1560 /* If this is a label, a JUMP_INSN, or has REG_NOTES (which might
1561 include REG_LABEL_OPERAND and REG_LABEL_TARGET), we need to see
1562 what effects this has on the known offsets at labels. */
1564 if (LABEL_P (insn) || JUMP_P (insn)
1565 || (INSN_P (insn) && REG_NOTES (insn) != 0))
1566 set_label_offsets (insn, insn, 0);
1570 rtx old_body = PATTERN (insn);
1571 int old_code = INSN_CODE (insn);
1572 rtx old_notes = REG_NOTES (insn);
1573 int did_elimination = 0;
1574 int operands_changed = 0;
1575 rtx set = single_set (insn);
1577 /* Skip insns that only set an equivalence. */
1578 if (set && REG_P (SET_DEST (set))
1579 && reg_renumber[REGNO (SET_DEST (set))] < 0
1580 && (reg_equiv_constant[REGNO (SET_DEST (set))]
1581 || (reg_equiv_invariant[REGNO (SET_DEST (set))]))
1582 && reg_equiv_init[REGNO (SET_DEST (set))])
1585 /* If needed, eliminate any eliminable registers. */
1586 if (num_eliminable || num_eliminable_invariants)
1587 did_elimination = eliminate_regs_in_insn (insn, 0);
1589 /* Analyze the instruction. */
1590 operands_changed = find_reloads (insn, 0, spill_indirect_levels,
1591 global, spill_reg_order);
1593 /* If a no-op set needs more than one reload, this is likely
1594 to be something that needs input address reloads. We
1595 can't get rid of this cleanly later, and it is of no use
1596 anyway, so discard it now.
1597 We only do this when expensive_optimizations is enabled,
1598 since this complements reload inheritance / output
1599 reload deletion, and it can make debugging harder. */
1600 if (flag_expensive_optimizations && n_reloads > 1)
1602 rtx set = single_set (insn);
1605 ((SET_SRC (set) == SET_DEST (set)
1606 && REG_P (SET_SRC (set))
1607 && REGNO (SET_SRC (set)) >= FIRST_PSEUDO_REGISTER)
1608 || (REG_P (SET_SRC (set)) && REG_P (SET_DEST (set))
1609 && reg_renumber[REGNO (SET_SRC (set))] < 0
1610 && reg_renumber[REGNO (SET_DEST (set))] < 0
1611 && reg_equiv_memory_loc[REGNO (SET_SRC (set))] != NULL
1612 && reg_equiv_memory_loc[REGNO (SET_DEST (set))] != NULL
1613 && rtx_equal_p (reg_equiv_memory_loc
1614 [REGNO (SET_SRC (set))],
1615 reg_equiv_memory_loc
1616 [REGNO (SET_DEST (set))]))))
1618 if (ira_conflicts_p)
1619 /* Inform IRA about the insn deletion. */
1620 ira_mark_memory_move_deletion (REGNO (SET_DEST (set)),
1621 REGNO (SET_SRC (set)));
1623 /* Delete it from the reload chain. */
1625 chain->prev->next = next;
1627 reload_insn_chain = next;
1629 next->prev = chain->prev;
1630 chain->next = unused_insn_chains;
1631 unused_insn_chains = chain;
1636 update_eliminable_offsets ();
1638 /* Remember for later shortcuts which insns had any reloads or
1639 register eliminations. */
1640 chain->need_elim = did_elimination;
1641 chain->need_reload = n_reloads > 0;
1642 chain->need_operand_change = operands_changed;
1644 /* Discard any register replacements done. */
1645 if (did_elimination)
1647 obstack_free (&reload_obstack, reload_insn_firstobj);
1648 PATTERN (insn) = old_body;
1649 INSN_CODE (insn) = old_code;
1650 REG_NOTES (insn) = old_notes;
1651 something_needs_elimination = 1;
1654 something_needs_operands_changed |= operands_changed;
1658 copy_reloads (chain);
1659 *pprev_reload = chain;
1660 pprev_reload = &chain->next_need_reload;
1667 /* Comparison function for qsort to decide which of two reloads
1668 should be handled first. *P1 and *P2 are the reload numbers. */
1671 reload_reg_class_lower (const void *r1p, const void *r2p)
1673 int r1 = *(const short *) r1p, r2 = *(const short *) r2p;
1676 /* Consider required reloads before optional ones. */
1677 t = rld[r1].optional - rld[r2].optional;
1681 /* Count all solitary classes before non-solitary ones. */
1682 t = ((reg_class_size[(int) rld[r2].rclass] == 1)
1683 - (reg_class_size[(int) rld[r1].rclass] == 1));
1687 /* Aside from solitaires, consider all multi-reg groups first. */
1688 t = rld[r2].nregs - rld[r1].nregs;
1692 /* Consider reloads in order of increasing reg-class number. */
1693 t = (int) rld[r1].rclass - (int) rld[r2].rclass;
1697 /* If reloads are equally urgent, sort by reload number,
1698 so that the results of qsort leave nothing to chance. */
1702 /* The cost of spilling each hard reg. */
1703 static int spill_cost[FIRST_PSEUDO_REGISTER];
1705 /* When spilling multiple hard registers, we use SPILL_COST for the first
1706 spilled hard reg and SPILL_ADD_COST for subsequent regs. SPILL_ADD_COST
1707 only the first hard reg for a multi-reg pseudo. */
1708 static int spill_add_cost[FIRST_PSEUDO_REGISTER];
1710 /* Map of hard regno to pseudo regno currently occupying the hard
1712 static int hard_regno_to_pseudo_regno[FIRST_PSEUDO_REGISTER];
1714 /* Update the spill cost arrays, considering that pseudo REG is live. */
1717 count_pseudo (int reg)
1719 int freq = REG_FREQ (reg);
1720 int r = reg_renumber[reg];
1723 if (REGNO_REG_SET_P (&pseudos_counted, reg)
1724 || REGNO_REG_SET_P (&spilled_pseudos, reg)
1725 /* Ignore spilled pseudo-registers which can be here only if IRA
1727 || (ira_conflicts_p && r < 0))
1730 SET_REGNO_REG_SET (&pseudos_counted, reg);
1732 gcc_assert (r >= 0);
1734 spill_add_cost[r] += freq;
1735 nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (reg)];
1738 hard_regno_to_pseudo_regno[r + nregs] = reg;
1739 spill_cost[r + nregs] += freq;
1743 /* Calculate the SPILL_COST and SPILL_ADD_COST arrays and determine the
1744 contents of BAD_SPILL_REGS for the insn described by CHAIN. */
1747 order_regs_for_reload (struct insn_chain *chain)
1750 HARD_REG_SET used_by_pseudos;
1751 HARD_REG_SET used_by_pseudos2;
1752 reg_set_iterator rsi;
1754 COPY_HARD_REG_SET (bad_spill_regs, fixed_reg_set);
1756 memset (spill_cost, 0, sizeof spill_cost);
1757 memset (spill_add_cost, 0, sizeof spill_add_cost);
1758 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1759 hard_regno_to_pseudo_regno[i] = -1;
1761 /* Count number of uses of each hard reg by pseudo regs allocated to it
1762 and then order them by decreasing use. First exclude hard registers
1763 that are live in or across this insn. */
1765 REG_SET_TO_HARD_REG_SET (used_by_pseudos, &chain->live_throughout);
1766 REG_SET_TO_HARD_REG_SET (used_by_pseudos2, &chain->dead_or_set);
1767 IOR_HARD_REG_SET (bad_spill_regs, used_by_pseudos);
1768 IOR_HARD_REG_SET (bad_spill_regs, used_by_pseudos2);
1770 /* Now find out which pseudos are allocated to it, and update
1772 CLEAR_REG_SET (&pseudos_counted);
1774 EXECUTE_IF_SET_IN_REG_SET
1775 (&chain->live_throughout, FIRST_PSEUDO_REGISTER, i, rsi)
1779 EXECUTE_IF_SET_IN_REG_SET
1780 (&chain->dead_or_set, FIRST_PSEUDO_REGISTER, i, rsi)
1784 CLEAR_REG_SET (&pseudos_counted);
1787 /* Vector of reload-numbers showing the order in which the reloads should
1789 static short reload_order[MAX_RELOADS];
1791 /* This is used to keep track of the spill regs used in one insn. */
1792 static HARD_REG_SET used_spill_regs_local;
1794 /* We decided to spill hard register SPILLED, which has a size of
1795 SPILLED_NREGS. Determine how pseudo REG, which is live during the insn,
1796 is affected. We will add it to SPILLED_PSEUDOS if necessary, and we will
1797 update SPILL_COST/SPILL_ADD_COST. */
1800 count_spilled_pseudo (int spilled, int spilled_nregs, int reg)
1802 int freq = REG_FREQ (reg);
1803 int r = reg_renumber[reg];
1804 int nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (reg)];
1806 /* Ignore spilled pseudo-registers which can be here only if IRA is
1808 if ((ira_conflicts_p && r < 0)
1809 || REGNO_REG_SET_P (&spilled_pseudos, reg)
1810 || spilled + spilled_nregs <= r || r + nregs <= spilled)
1813 SET_REGNO_REG_SET (&spilled_pseudos, reg);
1815 spill_add_cost[r] -= freq;
1818 hard_regno_to_pseudo_regno[r + nregs] = -1;
1819 spill_cost[r + nregs] -= freq;
1823 /* Find reload register to use for reload number ORDER. */
1826 find_reg (struct insn_chain *chain, int order)
1828 int rnum = reload_order[order];
1829 struct reload *rl = rld + rnum;
1830 int best_cost = INT_MAX;
1832 unsigned int i, j, n;
1834 HARD_REG_SET not_usable;
1835 HARD_REG_SET used_by_other_reload;
1836 reg_set_iterator rsi;
1837 static int regno_pseudo_regs[FIRST_PSEUDO_REGISTER];
1838 static int best_regno_pseudo_regs[FIRST_PSEUDO_REGISTER];
1840 COPY_HARD_REG_SET (not_usable, bad_spill_regs);
1841 IOR_HARD_REG_SET (not_usable, bad_spill_regs_global);
1842 IOR_COMPL_HARD_REG_SET (not_usable, reg_class_contents[rl->rclass]);
1844 CLEAR_HARD_REG_SET (used_by_other_reload);
1845 for (k = 0; k < order; k++)
1847 int other = reload_order[k];
1849 if (rld[other].regno >= 0 && reloads_conflict (other, rnum))
1850 for (j = 0; j < rld[other].nregs; j++)
1851 SET_HARD_REG_BIT (used_by_other_reload, rld[other].regno + j);
1854 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1856 #ifdef REG_ALLOC_ORDER
1857 unsigned int regno = reg_alloc_order[i];
1859 unsigned int regno = i;
1862 if (! TEST_HARD_REG_BIT (not_usable, regno)
1863 && ! TEST_HARD_REG_BIT (used_by_other_reload, regno)
1864 && HARD_REGNO_MODE_OK (regno, rl->mode))
1866 int this_cost = spill_cost[regno];
1868 unsigned int this_nregs = hard_regno_nregs[regno][rl->mode];
1870 for (j = 1; j < this_nregs; j++)
1872 this_cost += spill_add_cost[regno + j];
1873 if ((TEST_HARD_REG_BIT (not_usable, regno + j))
1874 || TEST_HARD_REG_BIT (used_by_other_reload, regno + j))
1880 if (ira_conflicts_p)
1882 /* Ask IRA to find a better pseudo-register for
1884 for (n = j = 0; j < this_nregs; j++)
1886 int r = hard_regno_to_pseudo_regno[regno + j];
1890 if (n == 0 || regno_pseudo_regs[n - 1] != r)
1891 regno_pseudo_regs[n++] = r;
1893 regno_pseudo_regs[n++] = -1;
1895 || ira_better_spill_reload_regno_p (regno_pseudo_regs,
1896 best_regno_pseudo_regs,
1903 best_regno_pseudo_regs[j] = regno_pseudo_regs[j];
1904 if (regno_pseudo_regs[j] < 0)
1911 if (rl->in && REG_P (rl->in) && REGNO (rl->in) == regno)
1913 if (rl->out && REG_P (rl->out) && REGNO (rl->out) == regno)
1915 if (this_cost < best_cost
1916 /* Among registers with equal cost, prefer caller-saved ones, or
1917 use REG_ALLOC_ORDER if it is defined. */
1918 || (this_cost == best_cost
1919 #ifdef REG_ALLOC_ORDER
1920 && (inv_reg_alloc_order[regno]
1921 < inv_reg_alloc_order[best_reg])
1923 && call_used_regs[regno]
1924 && ! call_used_regs[best_reg]
1929 best_cost = this_cost;
1937 fprintf (dump_file, "Using reg %d for reload %d\n", best_reg, rnum);
1939 rl->nregs = hard_regno_nregs[best_reg][rl->mode];
1940 rl->regno = best_reg;
1942 EXECUTE_IF_SET_IN_REG_SET
1943 (&chain->live_throughout, FIRST_PSEUDO_REGISTER, j, rsi)
1945 count_spilled_pseudo (best_reg, rl->nregs, j);
1948 EXECUTE_IF_SET_IN_REG_SET
1949 (&chain->dead_or_set, FIRST_PSEUDO_REGISTER, j, rsi)
1951 count_spilled_pseudo (best_reg, rl->nregs, j);
1954 for (i = 0; i < rl->nregs; i++)
1956 gcc_assert (spill_cost[best_reg + i] == 0);
1957 gcc_assert (spill_add_cost[best_reg + i] == 0);
1958 gcc_assert (hard_regno_to_pseudo_regno[best_reg + i] == -1);
1959 SET_HARD_REG_BIT (used_spill_regs_local, best_reg + i);
1964 /* Find more reload regs to satisfy the remaining need of an insn, which
1966 Do it by ascending class number, since otherwise a reg
1967 might be spilled for a big class and might fail to count
1968 for a smaller class even though it belongs to that class. */
1971 find_reload_regs (struct insn_chain *chain)
1975 /* In order to be certain of getting the registers we need,
1976 we must sort the reloads into order of increasing register class.
1977 Then our grabbing of reload registers will parallel the process
1978 that provided the reload registers. */
1979 for (i = 0; i < chain->n_reloads; i++)
1981 /* Show whether this reload already has a hard reg. */
1982 if (chain->rld[i].reg_rtx)
1984 int regno = REGNO (chain->rld[i].reg_rtx);
1985 chain->rld[i].regno = regno;
1987 = hard_regno_nregs[regno][GET_MODE (chain->rld[i].reg_rtx)];
1990 chain->rld[i].regno = -1;
1991 reload_order[i] = i;
1994 n_reloads = chain->n_reloads;
1995 memcpy (rld, chain->rld, n_reloads * sizeof (struct reload));
1997 CLEAR_HARD_REG_SET (used_spill_regs_local);
2000 fprintf (dump_file, "Spilling for insn %d.\n", INSN_UID (chain->insn));
2002 qsort (reload_order, n_reloads, sizeof (short), reload_reg_class_lower);
2004 /* Compute the order of preference for hard registers to spill. */
2006 order_regs_for_reload (chain);
2008 for (i = 0; i < n_reloads; i++)
2010 int r = reload_order[i];
2012 /* Ignore reloads that got marked inoperative. */
2013 if ((rld[r].out != 0 || rld[r].in != 0 || rld[r].secondary_p)
2014 && ! rld[r].optional
2015 && rld[r].regno == -1)
2016 if (! find_reg (chain, i))
2019 fprintf (dump_file, "reload failure for reload %d\n", r);
2020 spill_failure (chain->insn, rld[r].rclass);
2026 COPY_HARD_REG_SET (chain->used_spill_regs, used_spill_regs_local);
2027 IOR_HARD_REG_SET (used_spill_regs, used_spill_regs_local);
2029 memcpy (chain->rld, rld, n_reloads * sizeof (struct reload));
2033 select_reload_regs (void)
2035 struct insn_chain *chain;
2037 /* Try to satisfy the needs for each insn. */
2038 for (chain = insns_need_reload; chain != 0;
2039 chain = chain->next_need_reload)
2040 find_reload_regs (chain);
2043 /* Delete all insns that were inserted by emit_caller_save_insns during
2046 delete_caller_save_insns (void)
2048 struct insn_chain *c = reload_insn_chain;
2052 while (c != 0 && c->is_caller_save_insn)
2054 struct insn_chain *next = c->next;
2057 if (c == reload_insn_chain)
2058 reload_insn_chain = next;
2062 next->prev = c->prev;
2064 c->prev->next = next;
2065 c->next = unused_insn_chains;
2066 unused_insn_chains = c;
2074 /* Handle the failure to find a register to spill.
2075 INSN should be one of the insns which needed this particular spill reg. */
2078 spill_failure (rtx insn, enum reg_class rclass)
2080 if (asm_noperands (PATTERN (insn)) >= 0)
2081 error_for_asm (insn, "can't find a register in class %qs while "
2082 "reloading %<asm%>",
2083 reg_class_names[rclass]);
2086 error ("unable to find a register to spill in class %qs",
2087 reg_class_names[rclass]);
2091 fprintf (dump_file, "\nReloads for insn # %d\n", INSN_UID (insn));
2092 debug_reload_to_stream (dump_file);
2094 fatal_insn ("this is the insn:", insn);
2098 /* Delete an unneeded INSN and any previous insns who sole purpose is loading
2099 data that is dead in INSN. */
2102 delete_dead_insn (rtx insn)
2104 rtx prev = prev_real_insn (insn);
2107 /* If the previous insn sets a register that dies in our insn, delete it
2109 if (prev && GET_CODE (PATTERN (prev)) == SET
2110 && (prev_dest = SET_DEST (PATTERN (prev)), REG_P (prev_dest))
2111 && reg_mentioned_p (prev_dest, PATTERN (insn))
2112 && find_regno_note (insn, REG_DEAD, REGNO (prev_dest))
2113 && ! side_effects_p (SET_SRC (PATTERN (prev))))
2114 delete_dead_insn (prev);
2116 SET_INSN_DELETED (insn);
2119 /* Modify the home of pseudo-reg I.
2120 The new home is present in reg_renumber[I].
2122 FROM_REG may be the hard reg that the pseudo-reg is being spilled from;
2123 or it may be -1, meaning there is none or it is not relevant.
2124 This is used so that all pseudos spilled from a given hard reg
2125 can share one stack slot. */
2128 alter_reg (int i, int from_reg, bool dont_share_p)
2130 /* When outputting an inline function, this can happen
2131 for a reg that isn't actually used. */
2132 if (regno_reg_rtx[i] == 0)
2135 /* If the reg got changed to a MEM at rtl-generation time,
2137 if (!REG_P (regno_reg_rtx[i]))
2140 /* Modify the reg-rtx to contain the new hard reg
2141 number or else to contain its pseudo reg number. */
2142 SET_REGNO (regno_reg_rtx[i],
2143 reg_renumber[i] >= 0 ? reg_renumber[i] : i);
2145 /* If we have a pseudo that is needed but has no hard reg or equivalent,
2146 allocate a stack slot for it. */
2148 if (reg_renumber[i] < 0
2149 && REG_N_REFS (i) > 0
2150 && reg_equiv_constant[i] == 0
2151 && (reg_equiv_invariant[i] == 0 || reg_equiv_init[i] == 0)
2152 && reg_equiv_memory_loc[i] == 0)
2155 enum machine_mode mode = GET_MODE (regno_reg_rtx[i]);
2156 unsigned int inherent_size = PSEUDO_REGNO_BYTES (i);
2157 unsigned int inherent_align = GET_MODE_ALIGNMENT (mode);
2158 unsigned int total_size = MAX (inherent_size, reg_max_ref_width[i]);
2159 unsigned int min_align = reg_max_ref_width[i] * BITS_PER_UNIT;
2162 if (ira_conflicts_p)
2164 /* Mark the spill for IRA. */
2165 SET_REGNO_REG_SET (&spilled_pseudos, i);
2167 x = ira_reuse_stack_slot (i, inherent_size, total_size);
2173 /* Each pseudo reg has an inherent size which comes from its own mode,
2174 and a total size which provides room for paradoxical subregs
2175 which refer to the pseudo reg in wider modes.
2177 We can use a slot already allocated if it provides both
2178 enough inherent space and enough total space.
2179 Otherwise, we allocate a new slot, making sure that it has no less
2180 inherent space, and no less total space, then the previous slot. */
2181 else if (from_reg == -1 || (!dont_share_p && ira_conflicts_p))
2185 /* No known place to spill from => no slot to reuse. */
2186 x = assign_stack_local (mode, total_size,
2187 min_align > inherent_align
2188 || total_size > inherent_size ? -1 : 0);
2192 /* Cancel the big-endian correction done in assign_stack_local.
2193 Get the address of the beginning of the slot. This is so we
2194 can do a big-endian correction unconditionally below. */
2195 if (BYTES_BIG_ENDIAN)
2197 adjust = inherent_size - total_size;
2200 = adjust_address_nv (x, mode_for_size (total_size
2206 if (! dont_share_p && ira_conflicts_p)
2207 /* Inform IRA about allocation a new stack slot. */
2208 ira_mark_new_stack_slot (stack_slot, i, total_size);
2211 /* Reuse a stack slot if possible. */
2212 else if (spill_stack_slot[from_reg] != 0
2213 && spill_stack_slot_width[from_reg] >= total_size
2214 && (GET_MODE_SIZE (GET_MODE (spill_stack_slot[from_reg]))
2216 && MEM_ALIGN (spill_stack_slot[from_reg]) >= min_align)
2217 x = spill_stack_slot[from_reg];
2219 /* Allocate a bigger slot. */
2222 /* Compute maximum size needed, both for inherent size
2223 and for total size. */
2226 if (spill_stack_slot[from_reg])
2228 if (GET_MODE_SIZE (GET_MODE (spill_stack_slot[from_reg]))
2230 mode = GET_MODE (spill_stack_slot[from_reg]);
2231 if (spill_stack_slot_width[from_reg] > total_size)
2232 total_size = spill_stack_slot_width[from_reg];
2233 if (MEM_ALIGN (spill_stack_slot[from_reg]) > min_align)
2234 min_align = MEM_ALIGN (spill_stack_slot[from_reg]);
2237 /* Make a slot with that size. */
2238 x = assign_stack_local (mode, total_size,
2239 min_align > inherent_align
2240 || total_size > inherent_size ? -1 : 0);
2243 /* Cancel the big-endian correction done in assign_stack_local.
2244 Get the address of the beginning of the slot. This is so we
2245 can do a big-endian correction unconditionally below. */
2246 if (BYTES_BIG_ENDIAN)
2248 adjust = GET_MODE_SIZE (mode) - total_size;
2251 = adjust_address_nv (x, mode_for_size (total_size
2257 spill_stack_slot[from_reg] = stack_slot;
2258 spill_stack_slot_width[from_reg] = total_size;
2261 /* On a big endian machine, the "address" of the slot
2262 is the address of the low part that fits its inherent mode. */
2263 if (BYTES_BIG_ENDIAN && inherent_size < total_size)
2264 adjust += (total_size - inherent_size);
2266 /* If we have any adjustment to make, or if the stack slot is the
2267 wrong mode, make a new stack slot. */
2268 x = adjust_address_nv (x, GET_MODE (regno_reg_rtx[i]), adjust);
2270 /* Set all of the memory attributes as appropriate for a spill. */
2271 set_mem_attrs_for_spill (x);
2273 /* Save the stack slot for later. */
2274 reg_equiv_memory_loc[i] = x;
2278 /* Mark the slots in regs_ever_live for the hard regs used by
2279 pseudo-reg number REGNO, accessed in MODE. */
2282 mark_home_live_1 (int regno, enum machine_mode mode)
2286 i = reg_renumber[regno];
2289 lim = end_hard_regno (mode, i);
2291 df_set_regs_ever_live(i++, true);
2294 /* Mark the slots in regs_ever_live for the hard regs
2295 used by pseudo-reg number REGNO. */
2298 mark_home_live (int regno)
2300 if (reg_renumber[regno] >= 0)
2301 mark_home_live_1 (regno, PSEUDO_REGNO_MODE (regno));
2304 /* This function handles the tracking of elimination offsets around branches.
2306 X is a piece of RTL being scanned.
2308 INSN is the insn that it came from, if any.
2310 INITIAL_P is nonzero if we are to set the offset to be the initial
2311 offset and zero if we are setting the offset of the label to be the
2315 set_label_offsets (rtx x, rtx insn, int initial_p)
2317 enum rtx_code code = GET_CODE (x);
2320 struct elim_table *p;
2325 if (LABEL_REF_NONLOCAL_P (x))
2330 /* ... fall through ... */
2333 /* If we know nothing about this label, set the desired offsets. Note
2334 that this sets the offset at a label to be the offset before a label
2335 if we don't know anything about the label. This is not correct for
2336 the label after a BARRIER, but is the best guess we can make. If
2337 we guessed wrong, we will suppress an elimination that might have
2338 been possible had we been able to guess correctly. */
2340 if (! offsets_known_at[CODE_LABEL_NUMBER (x) - first_label_num])
2342 for (i = 0; i < NUM_ELIMINABLE_REGS; i++)
2343 offsets_at[CODE_LABEL_NUMBER (x) - first_label_num][i]
2344 = (initial_p ? reg_eliminate[i].initial_offset
2345 : reg_eliminate[i].offset);
2346 offsets_known_at[CODE_LABEL_NUMBER (x) - first_label_num] = 1;
2349 /* Otherwise, if this is the definition of a label and it is
2350 preceded by a BARRIER, set our offsets to the known offset of
2354 && (tem = prev_nonnote_insn (insn)) != 0
2356 set_offsets_for_label (insn);
2358 /* If neither of the above cases is true, compare each offset
2359 with those previously recorded and suppress any eliminations
2360 where the offsets disagree. */
2362 for (i = 0; i < NUM_ELIMINABLE_REGS; i++)
2363 if (offsets_at[CODE_LABEL_NUMBER (x) - first_label_num][i]
2364 != (initial_p ? reg_eliminate[i].initial_offset
2365 : reg_eliminate[i].offset))
2366 reg_eliminate[i].can_eliminate = 0;
2371 set_label_offsets (PATTERN (insn), insn, initial_p);
2373 /* ... fall through ... */
2377 /* Any labels mentioned in REG_LABEL_OPERAND notes can be branched
2378 to indirectly and hence must have all eliminations at their
2380 for (tem = REG_NOTES (x); tem; tem = XEXP (tem, 1))
2381 if (REG_NOTE_KIND (tem) == REG_LABEL_OPERAND)
2382 set_label_offsets (XEXP (tem, 0), insn, 1);
2388 /* Each of the labels in the parallel or address vector must be
2389 at their initial offsets. We want the first field for PARALLEL
2390 and ADDR_VEC and the second field for ADDR_DIFF_VEC. */
2392 for (i = 0; i < (unsigned) XVECLEN (x, code == ADDR_DIFF_VEC); i++)
2393 set_label_offsets (XVECEXP (x, code == ADDR_DIFF_VEC, i),
2398 /* We only care about setting PC. If the source is not RETURN,
2399 IF_THEN_ELSE, or a label, disable any eliminations not at
2400 their initial offsets. Similarly if any arm of the IF_THEN_ELSE
2401 isn't one of those possibilities. For branches to a label,
2402 call ourselves recursively.
2404 Note that this can disable elimination unnecessarily when we have
2405 a non-local goto since it will look like a non-constant jump to
2406 someplace in the current function. This isn't a significant
2407 problem since such jumps will normally be when all elimination
2408 pairs are back to their initial offsets. */
2410 if (SET_DEST (x) != pc_rtx)
2413 switch (GET_CODE (SET_SRC (x)))
2420 set_label_offsets (SET_SRC (x), insn, initial_p);
2424 tem = XEXP (SET_SRC (x), 1);
2425 if (GET_CODE (tem) == LABEL_REF)
2426 set_label_offsets (XEXP (tem, 0), insn, initial_p);
2427 else if (GET_CODE (tem) != PC && GET_CODE (tem) != RETURN)
2430 tem = XEXP (SET_SRC (x), 2);
2431 if (GET_CODE (tem) == LABEL_REF)
2432 set_label_offsets (XEXP (tem, 0), insn, initial_p);
2433 else if (GET_CODE (tem) != PC && GET_CODE (tem) != RETURN)
2441 /* If we reach here, all eliminations must be at their initial
2442 offset because we are doing a jump to a variable address. */
2443 for (p = reg_eliminate; p < ®_eliminate[NUM_ELIMINABLE_REGS]; p++)
2444 if (p->offset != p->initial_offset)
2445 p->can_eliminate = 0;
2453 /* Scan X and replace any eliminable registers (such as fp) with a
2454 replacement (such as sp), plus an offset.
2456 MEM_MODE is the mode of an enclosing MEM. We need this to know how
2457 much to adjust a register for, e.g., PRE_DEC. Also, if we are inside a
2458 MEM, we are allowed to replace a sum of a register and the constant zero
2459 with the register, which we cannot do outside a MEM. In addition, we need
2460 to record the fact that a register is referenced outside a MEM.
2462 If INSN is an insn, it is the insn containing X. If we replace a REG
2463 in a SET_DEST with an equivalent MEM and INSN is nonzero, write a
2464 CLOBBER of the pseudo after INSN so find_equiv_regs will know that
2465 the REG is being modified.
2467 Alternatively, INSN may be a note (an EXPR_LIST or INSN_LIST).
2468 That's used when we eliminate in expressions stored in notes.
2469 This means, do not set ref_outside_mem even if the reference
2472 REG_EQUIV_MEM and REG_EQUIV_ADDRESS contain address that have had
2473 replacements done assuming all offsets are at their initial values. If
2474 they are not, or if REG_EQUIV_ADDRESS is nonzero for a pseudo we
2475 encounter, return the actual location so that find_reloads will do
2476 the proper thing. */
2479 eliminate_regs_1 (rtx x, enum machine_mode mem_mode, rtx insn,
2480 bool may_use_invariant)
2482 enum rtx_code code = GET_CODE (x);
2483 struct elim_table *ep;
2490 if (! current_function_decl)
2513 /* First handle the case where we encounter a bare register that
2514 is eliminable. Replace it with a PLUS. */
2515 if (regno < FIRST_PSEUDO_REGISTER)
2517 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS];
2519 if (ep->from_rtx == x && ep->can_eliminate)
2520 return plus_constant (ep->to_rtx, ep->previous_offset);
2523 else if (reg_renumber && reg_renumber[regno] < 0
2524 && reg_equiv_invariant && reg_equiv_invariant[regno])
2526 if (may_use_invariant)
2527 return eliminate_regs_1 (copy_rtx (reg_equiv_invariant[regno]),
2528 mem_mode, insn, true);
2529 /* There exists at least one use of REGNO that cannot be
2530 eliminated. Prevent the defining insn from being deleted. */
2531 reg_equiv_init[regno] = NULL_RTX;
2532 alter_reg (regno, -1, true);
2536 /* You might think handling MINUS in a manner similar to PLUS is a
2537 good idea. It is not. It has been tried multiple times and every
2538 time the change has had to have been reverted.
2540 Other parts of reload know a PLUS is special (gen_reload for example)
2541 and require special code to handle code a reloaded PLUS operand.
2543 Also consider backends where the flags register is clobbered by a
2544 MINUS, but we can emit a PLUS that does not clobber flags (IA-32,
2545 lea instruction comes to mind). If we try to reload a MINUS, we
2546 may kill the flags register that was holding a useful value.
2548 So, please before trying to handle MINUS, consider reload as a
2549 whole instead of this little section as well as the backend issues. */
2551 /* If this is the sum of an eliminable register and a constant, rework
2553 if (REG_P (XEXP (x, 0))
2554 && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER
2555 && CONSTANT_P (XEXP (x, 1)))
2557 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS];
2559 if (ep->from_rtx == XEXP (x, 0) && ep->can_eliminate)
2561 /* The only time we want to replace a PLUS with a REG (this
2562 occurs when the constant operand of the PLUS is the negative
2563 of the offset) is when we are inside a MEM. We won't want
2564 to do so at other times because that would change the
2565 structure of the insn in a way that reload can't handle.
2566 We special-case the commonest situation in
2567 eliminate_regs_in_insn, so just replace a PLUS with a
2568 PLUS here, unless inside a MEM. */
2569 if (mem_mode != 0 && CONST_INT_P (XEXP (x, 1))
2570 && INTVAL (XEXP (x, 1)) == - ep->previous_offset)
2573 return gen_rtx_PLUS (Pmode, ep->to_rtx,
2574 plus_constant (XEXP (x, 1),
2575 ep->previous_offset));
2578 /* If the register is not eliminable, we are done since the other
2579 operand is a constant. */
2583 /* If this is part of an address, we want to bring any constant to the
2584 outermost PLUS. We will do this by doing register replacement in
2585 our operands and seeing if a constant shows up in one of them.
2587 Note that there is no risk of modifying the structure of the insn,
2588 since we only get called for its operands, thus we are either
2589 modifying the address inside a MEM, or something like an address
2590 operand of a load-address insn. */
2593 rtx new0 = eliminate_regs_1 (XEXP (x, 0), mem_mode, insn, true);
2594 rtx new1 = eliminate_regs_1 (XEXP (x, 1), mem_mode, insn, true);
2596 if (reg_renumber && (new0 != XEXP (x, 0) || new1 != XEXP (x, 1)))
2598 /* If one side is a PLUS and the other side is a pseudo that
2599 didn't get a hard register but has a reg_equiv_constant,
2600 we must replace the constant here since it may no longer
2601 be in the position of any operand. */
2602 if (GET_CODE (new0) == PLUS && REG_P (new1)
2603 && REGNO (new1) >= FIRST_PSEUDO_REGISTER
2604 && reg_renumber[REGNO (new1)] < 0
2605 && reg_equiv_constant != 0
2606 && reg_equiv_constant[REGNO (new1)] != 0)
2607 new1 = reg_equiv_constant[REGNO (new1)];
2608 else if (GET_CODE (new1) == PLUS && REG_P (new0)
2609 && REGNO (new0) >= FIRST_PSEUDO_REGISTER
2610 && reg_renumber[REGNO (new0)] < 0
2611 && reg_equiv_constant[REGNO (new0)] != 0)
2612 new0 = reg_equiv_constant[REGNO (new0)];
2614 new_rtx = form_sum (new0, new1);
2616 /* As above, if we are not inside a MEM we do not want to
2617 turn a PLUS into something else. We might try to do so here
2618 for an addition of 0 if we aren't optimizing. */
2619 if (! mem_mode && GET_CODE (new_rtx) != PLUS)
2620 return gen_rtx_PLUS (GET_MODE (x), new_rtx, const0_rtx);
2628 /* If this is the product of an eliminable register and a
2629 constant, apply the distribute law and move the constant out
2630 so that we have (plus (mult ..) ..). This is needed in order
2631 to keep load-address insns valid. This case is pathological.
2632 We ignore the possibility of overflow here. */
2633 if (REG_P (XEXP (x, 0))
2634 && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER
2635 && CONST_INT_P (XEXP (x, 1)))
2636 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS];
2638 if (ep->from_rtx == XEXP (x, 0) && ep->can_eliminate)
2641 /* Refs inside notes don't count for this purpose. */
2642 && ! (insn != 0 && (GET_CODE (insn) == EXPR_LIST
2643 || GET_CODE (insn) == INSN_LIST)))
2644 ep->ref_outside_mem = 1;
2647 plus_constant (gen_rtx_MULT (Pmode, ep->to_rtx, XEXP (x, 1)),
2648 ep->previous_offset * INTVAL (XEXP (x, 1)));
2651 /* ... fall through ... */
2655 /* See comments before PLUS about handling MINUS. */
2657 case DIV: case UDIV:
2658 case MOD: case UMOD:
2659 case AND: case IOR: case XOR:
2660 case ROTATERT: case ROTATE:
2661 case ASHIFTRT: case LSHIFTRT: case ASHIFT:
2663 case GE: case GT: case GEU: case GTU:
2664 case LE: case LT: case LEU: case LTU:
2666 rtx new0 = eliminate_regs_1 (XEXP (x, 0), mem_mode, insn, false);
2667 rtx new1 = XEXP (x, 1)
2668 ? eliminate_regs_1 (XEXP (x, 1), mem_mode, insn, false) : 0;
2670 if (new0 != XEXP (x, 0) || new1 != XEXP (x, 1))
2671 return gen_rtx_fmt_ee (code, GET_MODE (x), new0, new1);
2676 /* If we have something in XEXP (x, 0), the usual case, eliminate it. */
2679 new_rtx = eliminate_regs_1 (XEXP (x, 0), mem_mode, insn, true);
2680 if (new_rtx != XEXP (x, 0))
2682 /* If this is a REG_DEAD note, it is not valid anymore.
2683 Using the eliminated version could result in creating a
2684 REG_DEAD note for the stack or frame pointer. */
2685 if (REG_NOTE_KIND (x) == REG_DEAD)
2687 ? eliminate_regs_1 (XEXP (x, 1), mem_mode, insn, true)
2690 x = alloc_reg_note (REG_NOTE_KIND (x), new_rtx, XEXP (x, 1));
2694 /* ... fall through ... */
2697 /* Now do eliminations in the rest of the chain. If this was
2698 an EXPR_LIST, this might result in allocating more memory than is
2699 strictly needed, but it simplifies the code. */
2702 new_rtx = eliminate_regs_1 (XEXP (x, 1), mem_mode, insn, true);
2703 if (new_rtx != XEXP (x, 1))
2705 gen_rtx_fmt_ee (GET_CODE (x), GET_MODE (x), XEXP (x, 0), new_rtx);
2713 /* We do not support elimination of a register that is modified.
2714 elimination_effects has already make sure that this does not
2720 /* We do not support elimination of a register that is modified.
2721 elimination_effects has already make sure that this does not
2722 happen. The only remaining case we need to consider here is
2723 that the increment value may be an eliminable register. */
2724 if (GET_CODE (XEXP (x, 1)) == PLUS
2725 && XEXP (XEXP (x, 1), 0) == XEXP (x, 0))
2727 rtx new_rtx = eliminate_regs_1 (XEXP (XEXP (x, 1), 1), mem_mode,
2730 if (new_rtx != XEXP (XEXP (x, 1), 1))
2731 return gen_rtx_fmt_ee (code, GET_MODE (x), XEXP (x, 0),
2732 gen_rtx_PLUS (GET_MODE (x),
2733 XEXP (x, 0), new_rtx));
2737 case STRICT_LOW_PART:
2739 case SIGN_EXTEND: case ZERO_EXTEND:
2740 case TRUNCATE: case FLOAT_EXTEND: case FLOAT_TRUNCATE:
2741 case FLOAT: case FIX:
2742 case UNSIGNED_FIX: case UNSIGNED_FLOAT:
2751 new_rtx = eliminate_regs_1 (XEXP (x, 0), mem_mode, insn, false);
2752 if (new_rtx != XEXP (x, 0))
2753 return gen_rtx_fmt_e (code, GET_MODE (x), new_rtx);
2757 /* Similar to above processing, but preserve SUBREG_BYTE.
2758 Convert (subreg (mem)) to (mem) if not paradoxical.
2759 Also, if we have a non-paradoxical (subreg (pseudo)) and the
2760 pseudo didn't get a hard reg, we must replace this with the
2761 eliminated version of the memory location because push_reload
2762 may do the replacement in certain circumstances. */
2763 if (REG_P (SUBREG_REG (x))
2764 && (GET_MODE_SIZE (GET_MODE (x))
2765 <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
2766 && reg_equiv_memory_loc != 0
2767 && reg_equiv_memory_loc[REGNO (SUBREG_REG (x))] != 0)
2769 new_rtx = SUBREG_REG (x);
2772 new_rtx = eliminate_regs_1 (SUBREG_REG (x), mem_mode, insn, false);
2774 if (new_rtx != SUBREG_REG (x))
2776 int x_size = GET_MODE_SIZE (GET_MODE (x));
2777 int new_size = GET_MODE_SIZE (GET_MODE (new_rtx));
2780 && ((x_size < new_size
2781 #ifdef WORD_REGISTER_OPERATIONS
2782 /* On these machines, combine can create rtl of the form
2783 (set (subreg:m1 (reg:m2 R) 0) ...)
2784 where m1 < m2, and expects something interesting to
2785 happen to the entire word. Moreover, it will use the
2786 (reg:m2 R) later, expecting all bits to be preserved.
2787 So if the number of words is the same, preserve the
2788 subreg so that push_reload can see it. */
2789 && ! ((x_size - 1) / UNITS_PER_WORD
2790 == (new_size -1 ) / UNITS_PER_WORD)
2793 || x_size == new_size)
2795 return adjust_address_nv (new_rtx, GET_MODE (x), SUBREG_BYTE (x));
2797 return gen_rtx_SUBREG (GET_MODE (x), new_rtx, SUBREG_BYTE (x));
2803 /* Our only special processing is to pass the mode of the MEM to our
2804 recursive call and copy the flags. While we are here, handle this
2805 case more efficiently. */
2807 replace_equiv_address_nv (x,
2808 eliminate_regs_1 (XEXP (x, 0), GET_MODE (x),
2812 /* Handle insn_list USE that a call to a pure function may generate. */
2813 new_rtx = eliminate_regs_1 (XEXP (x, 0), VOIDmode, insn, false);
2814 if (new_rtx != XEXP (x, 0))
2815 return gen_rtx_USE (GET_MODE (x), new_rtx);
2827 /* Process each of our operands recursively. If any have changed, make a
2829 fmt = GET_RTX_FORMAT (code);
2830 for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
2834 new_rtx = eliminate_regs_1 (XEXP (x, i), mem_mode, insn, false);
2835 if (new_rtx != XEXP (x, i) && ! copied)
2837 x = shallow_copy_rtx (x);
2840 XEXP (x, i) = new_rtx;
2842 else if (*fmt == 'E')
2845 for (j = 0; j < XVECLEN (x, i); j++)
2847 new_rtx = eliminate_regs_1 (XVECEXP (x, i, j), mem_mode, insn, false);
2848 if (new_rtx != XVECEXP (x, i, j) && ! copied_vec)
2850 rtvec new_v = gen_rtvec_v (XVECLEN (x, i),
2854 x = shallow_copy_rtx (x);
2857 XVEC (x, i) = new_v;
2860 XVECEXP (x, i, j) = new_rtx;
2869 eliminate_regs (rtx x, enum machine_mode mem_mode, rtx insn)
2871 return eliminate_regs_1 (x, mem_mode, insn, false);
2874 /* Scan rtx X for modifications of elimination target registers. Update
2875 the table of eliminables to reflect the changed state. MEM_MODE is
2876 the mode of an enclosing MEM rtx, or VOIDmode if not within a MEM. */
2879 elimination_effects (rtx x, enum machine_mode mem_mode)
2881 enum rtx_code code = GET_CODE (x);
2882 struct elim_table *ep;
2907 /* First handle the case where we encounter a bare register that
2908 is eliminable. Replace it with a PLUS. */
2909 if (regno < FIRST_PSEUDO_REGISTER)
2911 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS];
2913 if (ep->from_rtx == x && ep->can_eliminate)
2916 ep->ref_outside_mem = 1;
2921 else if (reg_renumber[regno] < 0 && reg_equiv_constant
2922 && reg_equiv_constant[regno]
2923 && ! function_invariant_p (reg_equiv_constant[regno]))
2924 elimination_effects (reg_equiv_constant[regno], mem_mode);
2933 /* If we modify the source of an elimination rule, disable it. */
2934 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
2935 if (ep->from_rtx == XEXP (x, 0))
2936 ep->can_eliminate = 0;
2938 /* If we modify the target of an elimination rule by adding a constant,
2939 update its offset. If we modify the target in any other way, we'll
2940 have to disable the rule as well. */
2941 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
2942 if (ep->to_rtx == XEXP (x, 0))
2944 int size = GET_MODE_SIZE (mem_mode);
2946 /* If more bytes than MEM_MODE are pushed, account for them. */
2947 #ifdef PUSH_ROUNDING
2948 if (ep->to_rtx == stack_pointer_rtx)
2949 size = PUSH_ROUNDING (size);
2951 if (code == PRE_DEC || code == POST_DEC)
2953 else if (code == PRE_INC || code == POST_INC)
2955 else if (code == PRE_MODIFY || code == POST_MODIFY)
2957 if (GET_CODE (XEXP (x, 1)) == PLUS
2958 && XEXP (x, 0) == XEXP (XEXP (x, 1), 0)
2959 && CONST_INT_P (XEXP (XEXP (x, 1), 1)))
2960 ep->offset -= INTVAL (XEXP (XEXP (x, 1), 1));
2962 ep->can_eliminate = 0;
2966 /* These two aren't unary operators. */
2967 if (code == POST_MODIFY || code == PRE_MODIFY)
2970 /* Fall through to generic unary operation case. */
2971 case STRICT_LOW_PART:
2973 case SIGN_EXTEND: case ZERO_EXTEND:
2974 case TRUNCATE: case FLOAT_EXTEND: case FLOAT_TRUNCATE:
2975 case FLOAT: case FIX:
2976 case UNSIGNED_FIX: case UNSIGNED_FLOAT:
2985 elimination_effects (XEXP (x, 0), mem_mode);
2989 if (REG_P (SUBREG_REG (x))
2990 && (GET_MODE_SIZE (GET_MODE (x))
2991 <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
2992 && reg_equiv_memory_loc != 0
2993 && reg_equiv_memory_loc[REGNO (SUBREG_REG (x))] != 0)
2996 elimination_effects (SUBREG_REG (x), mem_mode);
3000 /* If using a register that is the source of an eliminate we still
3001 think can be performed, note it cannot be performed since we don't
3002 know how this register is used. */
3003 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3004 if (ep->from_rtx == XEXP (x, 0))
3005 ep->can_eliminate = 0;
3007 elimination_effects (XEXP (x, 0), mem_mode);
3011 /* If clobbering a register that is the replacement register for an
3012 elimination we still think can be performed, note that it cannot
3013 be performed. Otherwise, we need not be concerned about it. */
3014 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3015 if (ep->to_rtx == XEXP (x, 0))
3016 ep->can_eliminate = 0;
3018 elimination_effects (XEXP (x, 0), mem_mode);
3022 /* Check for setting a register that we know about. */
3023 if (REG_P (SET_DEST (x)))
3025 /* See if this is setting the replacement register for an
3028 If DEST is the hard frame pointer, we do nothing because we
3029 assume that all assignments to the frame pointer are for
3030 non-local gotos and are being done at a time when they are valid
3031 and do not disturb anything else. Some machines want to
3032 eliminate a fake argument pointer (or even a fake frame pointer)
3033 with either the real frame or the stack pointer. Assignments to
3034 the hard frame pointer must not prevent this elimination. */
3036 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS];
3038 if (ep->to_rtx == SET_DEST (x)
3039 && SET_DEST (x) != hard_frame_pointer_rtx)
3041 /* If it is being incremented, adjust the offset. Otherwise,
3042 this elimination can't be done. */
3043 rtx src = SET_SRC (x);
3045 if (GET_CODE (src) == PLUS
3046 && XEXP (src, 0) == SET_DEST (x)
3047 && CONST_INT_P (XEXP (src, 1)))
3048 ep->offset -= INTVAL (XEXP (src, 1));
3050 ep->can_eliminate = 0;
3054 elimination_effects (SET_DEST (x), VOIDmode);
3055 elimination_effects (SET_SRC (x), VOIDmode);
3059 /* Our only special processing is to pass the mode of the MEM to our
3061 elimination_effects (XEXP (x, 0), GET_MODE (x));
3068 fmt = GET_RTX_FORMAT (code);
3069 for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
3072 elimination_effects (XEXP (x, i), mem_mode);
3073 else if (*fmt == 'E')
3074 for (j = 0; j < XVECLEN (x, i); j++)
3075 elimination_effects (XVECEXP (x, i, j), mem_mode);
3079 /* Descend through rtx X and verify that no references to eliminable registers
3080 remain. If any do remain, mark the involved register as not
3084 check_eliminable_occurrences (rtx x)
3093 code = GET_CODE (x);
3095 if (code == REG && REGNO (x) < FIRST_PSEUDO_REGISTER)
3097 struct elim_table *ep;
3099 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3100 if (ep->from_rtx == x)
3101 ep->can_eliminate = 0;
3105 fmt = GET_RTX_FORMAT (code);
3106 for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
3109 check_eliminable_occurrences (XEXP (x, i));
3110 else if (*fmt == 'E')
3113 for (j = 0; j < XVECLEN (x, i); j++)
3114 check_eliminable_occurrences (XVECEXP (x, i, j));
3119 /* Scan INSN and eliminate all eliminable registers in it.
3121 If REPLACE is nonzero, do the replacement destructively. Also
3122 delete the insn as dead it if it is setting an eliminable register.
3124 If REPLACE is zero, do all our allocations in reload_obstack.
3126 If no eliminations were done and this insn doesn't require any elimination
3127 processing (these are not identical conditions: it might be updating sp,
3128 but not referencing fp; this needs to be seen during reload_as_needed so
3129 that the offset between fp and sp can be taken into consideration), zero
3130 is returned. Otherwise, 1 is returned. */
3133 eliminate_regs_in_insn (rtx insn, int replace)
3135 int icode = recog_memoized (insn);
3136 rtx old_body = PATTERN (insn);
3137 int insn_is_asm = asm_noperands (old_body) >= 0;
3138 rtx old_set = single_set (insn);
3142 rtx substed_operand[MAX_RECOG_OPERANDS];
3143 rtx orig_operand[MAX_RECOG_OPERANDS];
3144 struct elim_table *ep;
3145 rtx plus_src, plus_cst_src;
3147 if (! insn_is_asm && icode < 0)
3149 gcc_assert (GET_CODE (PATTERN (insn)) == USE
3150 || GET_CODE (PATTERN (insn)) == CLOBBER
3151 || GET_CODE (PATTERN (insn)) == ADDR_VEC
3152 || GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC
3153 || GET_CODE (PATTERN (insn)) == ASM_INPUT);
3157 if (old_set != 0 && REG_P (SET_DEST (old_set))
3158 && REGNO (SET_DEST (old_set)) < FIRST_PSEUDO_REGISTER)
3160 /* Check for setting an eliminable register. */
3161 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3162 if (ep->from_rtx == SET_DEST (old_set) && ep->can_eliminate)
3164 #if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
3165 /* If this is setting the frame pointer register to the
3166 hardware frame pointer register and this is an elimination
3167 that will be done (tested above), this insn is really
3168 adjusting the frame pointer downward to compensate for
3169 the adjustment done before a nonlocal goto. */
3170 if (ep->from == FRAME_POINTER_REGNUM
3171 && ep->to == HARD_FRAME_POINTER_REGNUM)
3173 rtx base = SET_SRC (old_set);
3174 rtx base_insn = insn;
3175 HOST_WIDE_INT offset = 0;
3177 while (base != ep->to_rtx)
3179 rtx prev_insn, prev_set;
3181 if (GET_CODE (base) == PLUS
3182 && CONST_INT_P (XEXP (base, 1)))
3184 offset += INTVAL (XEXP (base, 1));
3185 base = XEXP (base, 0);
3187 else if ((prev_insn = prev_nonnote_insn (base_insn)) != 0
3188 && (prev_set = single_set (prev_insn)) != 0
3189 && rtx_equal_p (SET_DEST (prev_set), base))
3191 base = SET_SRC (prev_set);
3192 base_insn = prev_insn;
3198 if (base == ep->to_rtx)
3201 = plus_constant (ep->to_rtx, offset - ep->offset);
3203 new_body = old_body;
3206 new_body = copy_insn (old_body);
3207 if (REG_NOTES (insn))
3208 REG_NOTES (insn) = copy_insn_1 (REG_NOTES (insn));
3210 PATTERN (insn) = new_body;
3211 old_set = single_set (insn);
3213 /* First see if this insn remains valid when we
3214 make the change. If not, keep the INSN_CODE
3215 the same and let reload fit it up. */
3216 validate_change (insn, &SET_SRC (old_set), src, 1);
3217 validate_change (insn, &SET_DEST (old_set),
3219 if (! apply_change_group ())
3221 SET_SRC (old_set) = src;
3222 SET_DEST (old_set) = ep->to_rtx;
3231 /* In this case this insn isn't serving a useful purpose. We
3232 will delete it in reload_as_needed once we know that this
3233 elimination is, in fact, being done.
3235 If REPLACE isn't set, we can't delete this insn, but needn't
3236 process it since it won't be used unless something changes. */
3239 delete_dead_insn (insn);
3247 /* We allow one special case which happens to work on all machines we
3248 currently support: a single set with the source or a REG_EQUAL
3249 note being a PLUS of an eliminable register and a constant. */
3250 plus_src = plus_cst_src = 0;
3251 if (old_set && REG_P (SET_DEST (old_set)))
3253 if (GET_CODE (SET_SRC (old_set)) == PLUS)
3254 plus_src = SET_SRC (old_set);
3255 /* First see if the source is of the form (plus (...) CST). */
3257 && CONST_INT_P (XEXP (plus_src, 1)))
3258 plus_cst_src = plus_src;
3259 else if (REG_P (SET_SRC (old_set))
3262 /* Otherwise, see if we have a REG_EQUAL note of the form
3263 (plus (...) CST). */
3265 for (links = REG_NOTES (insn); links; links = XEXP (links, 1))
3267 if ((REG_NOTE_KIND (links) == REG_EQUAL
3268 || REG_NOTE_KIND (links) == REG_EQUIV)
3269 && GET_CODE (XEXP (links, 0)) == PLUS
3270 && CONST_INT_P (XEXP (XEXP (links, 0), 1)))
3272 plus_cst_src = XEXP (links, 0);
3278 /* Check that the first operand of the PLUS is a hard reg or
3279 the lowpart subreg of one. */
3282 rtx reg = XEXP (plus_cst_src, 0);
3283 if (GET_CODE (reg) == SUBREG && subreg_lowpart_p (reg))
3284 reg = SUBREG_REG (reg);
3286 if (!REG_P (reg) || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
3292 rtx reg = XEXP (plus_cst_src, 0);
3293 HOST_WIDE_INT offset = INTVAL (XEXP (plus_cst_src, 1));
3295 if (GET_CODE (reg) == SUBREG)
3296 reg = SUBREG_REG (reg);
3298 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3299 if (ep->from_rtx == reg && ep->can_eliminate)
3301 rtx to_rtx = ep->to_rtx;
3302 offset += ep->offset;
3303 offset = trunc_int_for_mode (offset, GET_MODE (plus_cst_src));
3305 if (GET_CODE (XEXP (plus_cst_src, 0)) == SUBREG)
3306 to_rtx = gen_lowpart (GET_MODE (XEXP (plus_cst_src, 0)),
3308 /* If we have a nonzero offset, and the source is already
3309 a simple REG, the following transformation would
3310 increase the cost of the insn by replacing a simple REG
3311 with (plus (reg sp) CST). So try only when we already
3312 had a PLUS before. */
3313 if (offset == 0 || plus_src)
3315 rtx new_src = plus_constant (to_rtx, offset);
3317 new_body = old_body;
3320 new_body = copy_insn (old_body);
3321 if (REG_NOTES (insn))
3322 REG_NOTES (insn) = copy_insn_1 (REG_NOTES (insn));
3324 PATTERN (insn) = new_body;
3325 old_set = single_set (insn);
3327 /* First see if this insn remains valid when we make the
3328 change. If not, try to replace the whole pattern with
3329 a simple set (this may help if the original insn was a
3330 PARALLEL that was only recognized as single_set due to
3331 REG_UNUSED notes). If this isn't valid either, keep
3332 the INSN_CODE the same and let reload fix it up. */
3333 if (!validate_change (insn, &SET_SRC (old_set), new_src, 0))
3335 rtx new_pat = gen_rtx_SET (VOIDmode,
3336 SET_DEST (old_set), new_src);
3338 if (!validate_change (insn, &PATTERN (insn), new_pat, 0))
3339 SET_SRC (old_set) = new_src;
3346 /* This can't have an effect on elimination offsets, so skip right
3352 /* Determine the effects of this insn on elimination offsets. */
3353 elimination_effects (old_body, VOIDmode);
3355 /* Eliminate all eliminable registers occurring in operands that
3356 can be handled by reload. */
3357 extract_insn (insn);
3358 for (i = 0; i < recog_data.n_operands; i++)
3360 orig_operand[i] = recog_data.operand[i];
3361 substed_operand[i] = recog_data.operand[i];
3363 /* For an asm statement, every operand is eliminable. */
3364 if (insn_is_asm || insn_data[icode].operand[i].eliminable)
3366 bool is_set_src, in_plus;
3368 /* Check for setting a register that we know about. */
3369 if (recog_data.operand_type[i] != OP_IN
3370 && REG_P (orig_operand[i]))
3372 /* If we are assigning to a register that can be eliminated, it
3373 must be as part of a PARALLEL, since the code above handles
3374 single SETs. We must indicate that we can no longer
3375 eliminate this reg. */
3376 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS];
3378 if (ep->from_rtx == orig_operand[i])
3379 ep->can_eliminate = 0;
3382 /* Companion to the above plus substitution, we can allow
3383 invariants as the source of a plain move. */
3385 if (old_set && recog_data.operand_loc[i] == &SET_SRC (old_set))
3389 && (recog_data.operand_loc[i] == &XEXP (plus_src, 0)
3390 || recog_data.operand_loc[i] == &XEXP (plus_src, 1)))
3394 = eliminate_regs_1 (recog_data.operand[i], VOIDmode,
3395 replace ? insn : NULL_RTX,
3396 is_set_src || in_plus);
3397 if (substed_operand[i] != orig_operand[i])
3399 /* Terminate the search in check_eliminable_occurrences at
3401 *recog_data.operand_loc[i] = 0;
3403 /* If an output operand changed from a REG to a MEM and INSN is an
3404 insn, write a CLOBBER insn. */
3405 if (recog_data.operand_type[i] != OP_IN
3406 && REG_P (orig_operand[i])
3407 && MEM_P (substed_operand[i])
3409 emit_insn_after (gen_clobber (orig_operand[i]), insn);
3413 for (i = 0; i < recog_data.n_dups; i++)
3414 *recog_data.dup_loc[i]
3415 = *recog_data.operand_loc[(int) recog_data.dup_num[i]];
3417 /* If any eliminable remain, they aren't eliminable anymore. */
3418 check_eliminable_occurrences (old_body);
3420 /* Substitute the operands; the new values are in the substed_operand
3422 for (i = 0; i < recog_data.n_operands; i++)
3423 *recog_data.operand_loc[i] = substed_operand[i];
3424 for (i = 0; i < recog_data.n_dups; i++)
3425 *recog_data.dup_loc[i] = substed_operand[(int) recog_data.dup_num[i]];
3427 /* If we are replacing a body that was a (set X (plus Y Z)), try to
3428 re-recognize the insn. We do this in case we had a simple addition
3429 but now can do this as a load-address. This saves an insn in this
3431 If re-recognition fails, the old insn code number will still be used,
3432 and some register operands may have changed into PLUS expressions.
3433 These will be handled by find_reloads by loading them into a register
3438 /* If we aren't replacing things permanently and we changed something,
3439 make another copy to ensure that all the RTL is new. Otherwise
3440 things can go wrong if find_reload swaps commutative operands
3441 and one is inside RTL that has been copied while the other is not. */
3442 new_body = old_body;
3445 new_body = copy_insn (old_body);
3446 if (REG_NOTES (insn))
3447 REG_NOTES (insn) = copy_insn_1 (REG_NOTES (insn));
3449 PATTERN (insn) = new_body;
3451 /* If we had a move insn but now we don't, rerecognize it. This will
3452 cause spurious re-recognition if the old move had a PARALLEL since
3453 the new one still will, but we can't call single_set without
3454 having put NEW_BODY into the insn and the re-recognition won't
3455 hurt in this rare case. */
3456 /* ??? Why this huge if statement - why don't we just rerecognize the
3460 && ((REG_P (SET_SRC (old_set))
3461 && (GET_CODE (new_body) != SET
3462 || !REG_P (SET_SRC (new_body))))
3463 /* If this was a load from or store to memory, compare
3464 the MEM in recog_data.operand to the one in the insn.
3465 If they are not equal, then rerecognize the insn. */
3467 && ((MEM_P (SET_SRC (old_set))
3468 && SET_SRC (old_set) != recog_data.operand[1])
3469 || (MEM_P (SET_DEST (old_set))
3470 && SET_DEST (old_set) != recog_data.operand[0])))
3471 /* If this was an add insn before, rerecognize. */
3472 || GET_CODE (SET_SRC (old_set)) == PLUS))
3474 int new_icode = recog (PATTERN (insn), insn, 0);
3476 INSN_CODE (insn) = new_icode;
3480 /* Restore the old body. If there were any changes to it, we made a copy
3481 of it while the changes were still in place, so we'll correctly return
3482 a modified insn below. */
3485 /* Restore the old body. */
3486 for (i = 0; i < recog_data.n_operands; i++)
3487 *recog_data.operand_loc[i] = orig_operand[i];
3488 for (i = 0; i < recog_data.n_dups; i++)
3489 *recog_data.dup_loc[i] = orig_operand[(int) recog_data.dup_num[i]];
3492 /* Update all elimination pairs to reflect the status after the current
3493 insn. The changes we make were determined by the earlier call to
3494 elimination_effects.
3496 We also detect cases where register elimination cannot be done,
3497 namely, if a register would be both changed and referenced outside a MEM
3498 in the resulting insn since such an insn is often undefined and, even if
3499 not, we cannot know what meaning will be given to it. Note that it is
3500 valid to have a register used in an address in an insn that changes it
3501 (presumably with a pre- or post-increment or decrement).
3503 If anything changes, return nonzero. */
3505 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3507 if (ep->previous_offset != ep->offset && ep->ref_outside_mem)
3508 ep->can_eliminate = 0;
3510 ep->ref_outside_mem = 0;
3512 if (ep->previous_offset != ep->offset)
3517 /* If we changed something, perform elimination in REG_NOTES. This is
3518 needed even when REPLACE is zero because a REG_DEAD note might refer
3519 to a register that we eliminate and could cause a different number
3520 of spill registers to be needed in the final reload pass than in
3522 if (val && REG_NOTES (insn) != 0)
3524 = eliminate_regs_1 (REG_NOTES (insn), VOIDmode, REG_NOTES (insn), true);
3529 /* Loop through all elimination pairs.
3530 Recalculate the number not at initial offset.
3532 Compute the maximum offset (minimum offset if the stack does not
3533 grow downward) for each elimination pair. */
3536 update_eliminable_offsets (void)
3538 struct elim_table *ep;
3540 num_not_at_initial_offset = 0;
3541 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3543 ep->previous_offset = ep->offset;
3544 if (ep->can_eliminate && ep->offset != ep->initial_offset)
3545 num_not_at_initial_offset++;
3549 /* Given X, a SET or CLOBBER of DEST, if DEST is the target of a register
3550 replacement we currently believe is valid, mark it as not eliminable if X
3551 modifies DEST in any way other than by adding a constant integer to it.
3553 If DEST is the frame pointer, we do nothing because we assume that
3554 all assignments to the hard frame pointer are nonlocal gotos and are being
3555 done at a time when they are valid and do not disturb anything else.
3556 Some machines want to eliminate a fake argument pointer with either the
3557 frame or stack pointer. Assignments to the hard frame pointer must not
3558 prevent this elimination.
3560 Called via note_stores from reload before starting its passes to scan
3561 the insns of the function. */
3564 mark_not_eliminable (rtx dest, const_rtx x, void *data ATTRIBUTE_UNUSED)
3568 /* A SUBREG of a hard register here is just changing its mode. We should
3569 not see a SUBREG of an eliminable hard register, but check just in
3571 if (GET_CODE (dest) == SUBREG)
3572 dest = SUBREG_REG (dest);
3574 if (dest == hard_frame_pointer_rtx)
3577 for (i = 0; i < NUM_ELIMINABLE_REGS; i++)
3578 if (reg_eliminate[i].can_eliminate && dest == reg_eliminate[i].to_rtx
3579 && (GET_CODE (x) != SET
3580 || GET_CODE (SET_SRC (x)) != PLUS
3581 || XEXP (SET_SRC (x), 0) != dest
3582 || !CONST_INT_P (XEXP (SET_SRC (x), 1))))
3584 reg_eliminate[i].can_eliminate_previous
3585 = reg_eliminate[i].can_eliminate = 0;
3590 /* Verify that the initial elimination offsets did not change since the
3591 last call to set_initial_elim_offsets. This is used to catch cases
3592 where something illegal happened during reload_as_needed that could
3593 cause incorrect code to be generated if we did not check for it. */
3596 verify_initial_elim_offsets (void)
3600 if (!num_eliminable)
3603 #ifdef ELIMINABLE_REGS
3605 struct elim_table *ep;
3607 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3609 INITIAL_ELIMINATION_OFFSET (ep->from, ep->to, t);
3610 if (t != ep->initial_offset)
3615 INITIAL_FRAME_POINTER_OFFSET (t);
3616 if (t != reg_eliminate[0].initial_offset)
3623 /* Reset all offsets on eliminable registers to their initial values. */
3626 set_initial_elim_offsets (void)
3628 struct elim_table *ep = reg_eliminate;
3630 #ifdef ELIMINABLE_REGS
3631 for (; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3633 INITIAL_ELIMINATION_OFFSET (ep->from, ep->to, ep->initial_offset);
3634 ep->previous_offset = ep->offset = ep->initial_offset;
3637 INITIAL_FRAME_POINTER_OFFSET (ep->initial_offset);
3638 ep->previous_offset = ep->offset = ep->initial_offset;
3641 num_not_at_initial_offset = 0;
3644 /* Subroutine of set_initial_label_offsets called via for_each_eh_label. */
3647 set_initial_eh_label_offset (rtx label)
3649 set_label_offsets (label, NULL_RTX, 1);
3652 /* Initialize the known label offsets.
3653 Set a known offset for each forced label to be at the initial offset
3654 of each elimination. We do this because we assume that all
3655 computed jumps occur from a location where each elimination is
3656 at its initial offset.
3657 For all other labels, show that we don't know the offsets. */
3660 set_initial_label_offsets (void)
3663 memset (offsets_known_at, 0, num_labels);
3665 for (x = forced_labels; x; x = XEXP (x, 1))
3667 set_label_offsets (XEXP (x, 0), NULL_RTX, 1);
3669 for_each_eh_label (set_initial_eh_label_offset);
3672 /* Set all elimination offsets to the known values for the code label given
3676 set_offsets_for_label (rtx insn)
3679 int label_nr = CODE_LABEL_NUMBER (insn);
3680 struct elim_table *ep;
3682 num_not_at_initial_offset = 0;
3683 for (i = 0, ep = reg_eliminate; i < NUM_ELIMINABLE_REGS; ep++, i++)
3685 ep->offset = ep->previous_offset
3686 = offsets_at[label_nr - first_label_num][i];
3687 if (ep->can_eliminate && ep->offset != ep->initial_offset)
3688 num_not_at_initial_offset++;
3692 /* See if anything that happened changes which eliminations are valid.
3693 For example, on the SPARC, whether or not the frame pointer can
3694 be eliminated can depend on what registers have been used. We need
3695 not check some conditions again (such as flag_omit_frame_pointer)
3696 since they can't have changed. */
3699 update_eliminables (HARD_REG_SET *pset)
3701 int previous_frame_pointer_needed = frame_pointer_needed;
3702 struct elim_table *ep;
3704 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3705 if ((ep->from == HARD_FRAME_POINTER_REGNUM
3706 && targetm.frame_pointer_required ())
3707 #ifdef ELIMINABLE_REGS
3708 || ! CAN_ELIMINATE (ep->from, ep->to)
3711 ep->can_eliminate = 0;
3713 /* Look for the case where we have discovered that we can't replace
3714 register A with register B and that means that we will now be
3715 trying to replace register A with register C. This means we can
3716 no longer replace register C with register B and we need to disable
3717 such an elimination, if it exists. This occurs often with A == ap,
3718 B == sp, and C == fp. */
3720 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3722 struct elim_table *op;
3725 if (! ep->can_eliminate && ep->can_eliminate_previous)
3727 /* Find the current elimination for ep->from, if there is a
3729 for (op = reg_eliminate;
3730 op < ®_eliminate[NUM_ELIMINABLE_REGS]; op++)
3731 if (op->from == ep->from && op->can_eliminate)
3737 /* See if there is an elimination of NEW_TO -> EP->TO. If so,
3739 for (op = reg_eliminate;
3740 op < ®_eliminate[NUM_ELIMINABLE_REGS]; op++)
3741 if (op->from == new_to && op->to == ep->to)
3742 op->can_eliminate = 0;
3746 /* See if any registers that we thought we could eliminate the previous
3747 time are no longer eliminable. If so, something has changed and we
3748 must spill the register. Also, recompute the number of eliminable
3749 registers and see if the frame pointer is needed; it is if there is
3750 no elimination of the frame pointer that we can perform. */
3752 frame_pointer_needed = 1;
3753 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3755 if (ep->can_eliminate
3756 && ep->from == FRAME_POINTER_REGNUM
3757 && ep->to != HARD_FRAME_POINTER_REGNUM
3758 && (! SUPPORTS_STACK_ALIGNMENT
3759 || ! crtl->stack_realign_needed))
3760 frame_pointer_needed = 0;
3762 if (! ep->can_eliminate && ep->can_eliminate_previous)
3764 ep->can_eliminate_previous = 0;
3765 SET_HARD_REG_BIT (*pset, ep->from);
3770 /* If we didn't need a frame pointer last time, but we do now, spill
3771 the hard frame pointer. */
3772 if (frame_pointer_needed && ! previous_frame_pointer_needed)
3773 SET_HARD_REG_BIT (*pset, HARD_FRAME_POINTER_REGNUM);
3776 /* Return true if X is used as the target register of an elimination. */
3779 elimination_target_reg_p (rtx x)
3781 struct elim_table *ep;
3783 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3784 if (ep->to_rtx == x && ep->can_eliminate)
3790 /* Initialize the table of registers to eliminate.
3791 Pre-condition: global flag frame_pointer_needed has been set before
3792 calling this function. */
3795 init_elim_table (void)
3797 struct elim_table *ep;
3798 #ifdef ELIMINABLE_REGS
3799 const struct elim_table_1 *ep1;
3803 reg_eliminate = XCNEWVEC (struct elim_table, NUM_ELIMINABLE_REGS);
3807 #ifdef ELIMINABLE_REGS
3808 for (ep = reg_eliminate, ep1 = reg_eliminate_1;
3809 ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++, ep1++)
3811 ep->from = ep1->from;
3813 ep->can_eliminate = ep->can_eliminate_previous
3814 = (CAN_ELIMINATE (ep->from, ep->to)
3815 && ! (ep->to == STACK_POINTER_REGNUM
3816 && frame_pointer_needed
3817 && (! SUPPORTS_STACK_ALIGNMENT
3818 || ! stack_realign_fp)));
3821 reg_eliminate[0].from = reg_eliminate_1[0].from;
3822 reg_eliminate[0].to = reg_eliminate_1[0].to;
3823 reg_eliminate[0].can_eliminate = reg_eliminate[0].can_eliminate_previous
3824 = ! frame_pointer_needed;
3827 /* Count the number of eliminable registers and build the FROM and TO
3828 REG rtx's. Note that code in gen_rtx_REG will cause, e.g.,
3829 gen_rtx_REG (Pmode, STACK_POINTER_REGNUM) to equal stack_pointer_rtx.
3830 We depend on this. */
3831 for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
3833 num_eliminable += ep->can_eliminate;
3834 ep->from_rtx = gen_rtx_REG (Pmode, ep->from);
3835 ep->to_rtx = gen_rtx_REG (Pmode, ep->to);
3839 /* Kick all pseudos out of hard register REGNO.
3841 If CANT_ELIMINATE is nonzero, it means that we are doing this spill
3842 because we found we can't eliminate some register. In the case, no pseudos
3843 are allowed to be in the register, even if they are only in a block that
3844 doesn't require spill registers, unlike the case when we are spilling this
3845 hard reg to produce another spill register.
3847 Return nonzero if any pseudos needed to be kicked out. */
3850 spill_hard_reg (unsigned int regno, int cant_eliminate)
3856 SET_HARD_REG_BIT (bad_spill_regs_global, regno);
3857 df_set_regs_ever_live (regno, true);
3860 /* Spill every pseudo reg that was allocated to this reg
3861 or to something that overlaps this reg. */
3863 for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
3864 if (reg_renumber[i] >= 0
3865 && (unsigned int) reg_renumber[i] <= regno
3866 && end_hard_regno (PSEUDO_REGNO_MODE (i), reg_renumber[i]) > regno)
3867 SET_REGNO_REG_SET (&spilled_pseudos, i);
3870 /* After find_reload_regs has been run for all insn that need reloads,
3871 and/or spill_hard_regs was called, this function is used to actually
3872 spill pseudo registers and try to reallocate them. It also sets up the
3873 spill_regs array for use by choose_reload_regs. */
3876 finish_spills (int global)
3878 struct insn_chain *chain;
3879 int something_changed = 0;
3881 reg_set_iterator rsi;
3883 /* Build the spill_regs array for the function. */
3884 /* If there are some registers still to eliminate and one of the spill regs
3885 wasn't ever used before, additional stack space may have to be
3886 allocated to store this register. Thus, we may have changed the offset
3887 between the stack and frame pointers, so mark that something has changed.
3889 One might think that we need only set VAL to 1 if this is a call-used
3890 register. However, the set of registers that must be saved by the
3891 prologue is not identical to the call-used set. For example, the
3892 register used by the call insn for the return PC is a call-used register,
3893 but must be saved by the prologue. */
3896 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
3897 if (TEST_HARD_REG_BIT (used_spill_regs, i))
3899 spill_reg_order[i] = n_spills;
3900 spill_regs[n_spills++] = i;
3901 if (num_eliminable && ! df_regs_ever_live_p (i))
3902 something_changed = 1;
3903 df_set_regs_ever_live (i, true);
3906 spill_reg_order[i] = -1;
3908 EXECUTE_IF_SET_IN_REG_SET (&spilled_pseudos, FIRST_PSEUDO_REGISTER, i, rsi)
3909 if (! ira_conflicts_p || reg_renumber[i] >= 0)
3911 /* Record the current hard register the pseudo is allocated to
3912 in pseudo_previous_regs so we avoid reallocating it to the
3913 same hard reg in a later pass. */
3914 gcc_assert (reg_renumber[i] >= 0);
3916 SET_HARD_REG_BIT (pseudo_previous_regs[i], reg_renumber[i]);
3917 /* Mark it as no longer having a hard register home. */
3918 reg_renumber[i] = -1;
3919 if (ira_conflicts_p)
3920 /* Inform IRA about the change. */
3921 ira_mark_allocation_change (i);
3922 /* We will need to scan everything again. */
3923 something_changed = 1;
3926 /* Retry global register allocation if possible. */
3927 if (global && ira_conflicts_p)
3931 memset (pseudo_forbidden_regs, 0, max_regno * sizeof (HARD_REG_SET));
3932 /* For every insn that needs reloads, set the registers used as spill
3933 regs in pseudo_forbidden_regs for every pseudo live across the
3935 for (chain = insns_need_reload; chain; chain = chain->next_need_reload)
3937 EXECUTE_IF_SET_IN_REG_SET
3938 (&chain->live_throughout, FIRST_PSEUDO_REGISTER, i, rsi)
3940 IOR_HARD_REG_SET (pseudo_forbidden_regs[i],
3941 chain->used_spill_regs);
3943 EXECUTE_IF_SET_IN_REG_SET
3944 (&chain->dead_or_set, FIRST_PSEUDO_REGISTER, i, rsi)
3946 IOR_HARD_REG_SET (pseudo_forbidden_regs[i],
3947 chain->used_spill_regs);
3951 /* Retry allocating the pseudos spilled in IRA and the
3952 reload. For each reg, merge the various reg sets that
3953 indicate which hard regs can't be used, and call
3954 ira_reassign_pseudos. */
3955 for (n = 0, i = FIRST_PSEUDO_REGISTER; i < (unsigned) max_regno; i++)
3956 if (reg_old_renumber[i] != reg_renumber[i])
3958 if (reg_renumber[i] < 0)
3959 temp_pseudo_reg_arr[n++] = i;
3961 CLEAR_REGNO_REG_SET (&spilled_pseudos, i);
3963 if (ira_reassign_pseudos (temp_pseudo_reg_arr, n,
3964 bad_spill_regs_global,
3965 pseudo_forbidden_regs, pseudo_previous_regs,
3967 something_changed = 1;
3969 /* Fix up the register information in the insn chain.
3970 This involves deleting those of the spilled pseudos which did not get
3971 a new hard register home from the live_{before,after} sets. */
3972 for (chain = reload_insn_chain; chain; chain = chain->next)
3974 HARD_REG_SET used_by_pseudos;
3975 HARD_REG_SET used_by_pseudos2;
3977 if (! ira_conflicts_p)
3979 /* Don't do it for IRA because IRA and the reload still can
3980 assign hard registers to the spilled pseudos on next
3981 reload iterations. */
3982 AND_COMPL_REG_SET (&chain->live_throughout, &spilled_pseudos);
3983 AND_COMPL_REG_SET (&chain->dead_or_set, &spilled_pseudos);
3985 /* Mark any unallocated hard regs as available for spills. That
3986 makes inheritance work somewhat better. */
3987 if (chain->need_reload)
3989 REG_SET_TO_HARD_REG_SET (used_by_pseudos, &chain->live_throughout);
3990 REG_SET_TO_HARD_REG_SET (used_by_pseudos2, &chain->dead_or_set);
3991 IOR_HARD_REG_SET (used_by_pseudos, used_by_pseudos2);
3993 compute_use_by_pseudos (&used_by_pseudos, &chain->live_throughout);
3994 compute_use_by_pseudos (&used_by_pseudos, &chain->dead_or_set);
3995 /* Value of chain->used_spill_regs from previous iteration
3996 may be not included in the value calculated here because
3997 of possible removing caller-saves insns (see function
3998 delete_caller_save_insns. */
3999 COMPL_HARD_REG_SET (chain->used_spill_regs, used_by_pseudos);
4000 AND_HARD_REG_SET (chain->used_spill_regs, used_spill_regs);
4004 CLEAR_REG_SET (&changed_allocation_pseudos);
4005 /* Let alter_reg modify the reg rtx's for the modified pseudos. */
4006 for (i = FIRST_PSEUDO_REGISTER; i < (unsigned)max_regno; i++)
4008 int regno = reg_renumber[i];
4009 if (reg_old_renumber[i] == regno)
4012 SET_REGNO_REG_SET (&changed_allocation_pseudos, i);
4014 alter_reg (i, reg_old_renumber[i], false);
4015 reg_old_renumber[i] = regno;
4019 fprintf (dump_file, " Register %d now on stack.\n\n", i);
4021 fprintf (dump_file, " Register %d now in %d.\n\n",
4022 i, reg_renumber[i]);
4026 return something_changed;
4029 /* Find all paradoxical subregs within X and update reg_max_ref_width. */
4032 scan_paradoxical_subregs (rtx x)
4036 enum rtx_code code = GET_CODE (x);
4047 case CONST_VECTOR: /* shouldn't happen, but just in case. */
4055 if (REG_P (SUBREG_REG (x))
4056 && (GET_MODE_SIZE (GET_MODE (x))
4057 > reg_max_ref_width[REGNO (SUBREG_REG (x))]))
4059 reg_max_ref_width[REGNO (SUBREG_REG (x))]
4060 = GET_MODE_SIZE (GET_MODE (x));
4061 mark_home_live_1 (REGNO (SUBREG_REG (x)), GET_MODE (x));
4069 fmt = GET_RTX_FORMAT (code);
4070 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
4073 scan_paradoxical_subregs (XEXP (x, i));
4074 else if (fmt[i] == 'E')
4077 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
4078 scan_paradoxical_subregs (XVECEXP (x, i, j));
4083 /* A subroutine of reload_as_needed. If INSN has a REG_EH_REGION note,
4084 examine all of the reload insns between PREV and NEXT exclusive, and
4085 annotate all that may trap. */
4088 fixup_eh_region_note (rtx insn, rtx prev, rtx next)
4090 rtx note = find_reg_note (insn, REG_EH_REGION, NULL_RTX);
4096 if (! may_trap_p (PATTERN (insn)))
4097 remove_note (insn, note);
4099 for (i = NEXT_INSN (prev); i != next; i = NEXT_INSN (i))
4100 if (INSN_P (i) && i != insn && may_trap_p (PATTERN (i)))
4101 add_reg_note (i, REG_EH_REGION, XEXP (note, 0));
4104 /* Reload pseudo-registers into hard regs around each insn as needed.
4105 Additional register load insns are output before the insn that needs it
4106 and perhaps store insns after insns that modify the reloaded pseudo reg.
4108 reg_last_reload_reg and reg_reloaded_contents keep track of
4109 which registers are already available in reload registers.
4110 We update these for the reloads that we perform,
4111 as the insns are scanned. */
4114 reload_as_needed (int live_known)
4116 struct insn_chain *chain;
4117 #if defined (AUTO_INC_DEC)
4122 memset (spill_reg_rtx, 0, sizeof spill_reg_rtx);
4123 memset (spill_reg_store, 0, sizeof spill_reg_store);
4124 reg_last_reload_reg = XCNEWVEC (rtx, max_regno);
4125 INIT_REG_SET (®_has_output_reload);
4126 CLEAR_HARD_REG_SET (reg_reloaded_valid);
4127 CLEAR_HARD_REG_SET (reg_reloaded_call_part_clobbered);
4129 set_initial_elim_offsets ();
4131 for (chain = reload_insn_chain; chain; chain = chain->next)
4134 rtx insn = chain->insn;
4135 rtx old_next = NEXT_INSN (insn);
4137 rtx old_prev = PREV_INSN (insn);
4140 /* If we pass a label, copy the offsets from the label information
4141 into the current offsets of each elimination. */
4143 set_offsets_for_label (insn);
4145 else if (INSN_P (insn))
4147 regset_head regs_to_forget;
4148 INIT_REG_SET (®s_to_forget);
4149 note_stores (PATTERN (insn), forget_old_reloads_1, ®s_to_forget);
4151 /* If this is a USE and CLOBBER of a MEM, ensure that any
4152 references to eliminable registers have been removed. */
4154 if ((GET_CODE (PATTERN (insn)) == USE
4155 || GET_CODE (PATTERN (insn)) == CLOBBER)
4156 && MEM_P (XEXP (PATTERN (insn), 0)))
4157 XEXP (XEXP (PATTERN (insn), 0), 0)
4158 = eliminate_regs (XEXP (XEXP (PATTERN (insn), 0), 0),
4159 GET_MODE (XEXP (PATTERN (insn), 0)),
4162 /* If we need to do register elimination processing, do so.
4163 This might delete the insn, in which case we are done. */
4164 if ((num_eliminable || num_eliminable_invariants) && chain->need_elim)
4166 eliminate_regs_in_insn (insn, 1);
4169 update_eliminable_offsets ();
4170 CLEAR_REG_SET (®s_to_forget);
4175 /* If need_elim is nonzero but need_reload is zero, one might think
4176 that we could simply set n_reloads to 0. However, find_reloads
4177 could have done some manipulation of the insn (such as swapping
4178 commutative operands), and these manipulations are lost during
4179 the first pass for every insn that needs register elimination.
4180 So the actions of find_reloads must be redone here. */
4182 if (! chain->need_elim && ! chain->need_reload
4183 && ! chain->need_operand_change)
4185 /* First find the pseudo regs that must be reloaded for this insn.
4186 This info is returned in the tables reload_... (see reload.h).
4187 Also modify the body of INSN by substituting RELOAD
4188 rtx's for those pseudo regs. */
4191 CLEAR_REG_SET (®_has_output_reload);
4192 CLEAR_HARD_REG_SET (reg_is_output_reload);
4194 find_reloads (insn, 1, spill_indirect_levels, live_known,
4200 rtx next = NEXT_INSN (insn);
4203 prev = PREV_INSN (insn);
4205 /* Now compute which reload regs to reload them into. Perhaps
4206 reusing reload regs from previous insns, or else output
4207 load insns to reload them. Maybe output store insns too.
4208 Record the choices of reload reg in reload_reg_rtx. */
4209 choose_reload_regs (chain);
4211 /* Merge any reloads that we didn't combine for fear of
4212 increasing the number of spill registers needed but now
4213 discover can be safely merged. */
4214 if (SMALL_REGISTER_CLASSES)
4215 merge_assigned_reloads (insn);
4217 /* Generate the insns to reload operands into or out of
4218 their reload regs. */
4219 emit_reload_insns (chain);
4221 /* Substitute the chosen reload regs from reload_reg_rtx
4222 into the insn's body (or perhaps into the bodies of other
4223 load and store insn that we just made for reloading
4224 and that we moved the structure into). */
4225 subst_reloads (insn);
4227 /* Adjust the exception region notes for loads and stores. */
4228 if (flag_non_call_exceptions && !CALL_P (insn))
4229 fixup_eh_region_note (insn, prev, next);
4231 /* If this was an ASM, make sure that all the reload insns
4232 we have generated are valid. If not, give an error
4234 if (asm_noperands (PATTERN (insn)) >= 0)
4235 for (p = NEXT_INSN (prev); p != next; p = NEXT_INSN (p))
4236 if (p != insn && INSN_P (p)
4237 && GET_CODE (PATTERN (p)) != USE
4238 && (recog_memoized (p) < 0
4239 || (extract_insn (p), ! constrain_operands (1))))
4241 error_for_asm (insn,
4242 "%<asm%> operand requires "
4243 "impossible reload");
4248 if (num_eliminable && chain->need_elim)
4249 update_eliminable_offsets ();
4251 /* Any previously reloaded spilled pseudo reg, stored in this insn,
4252 is no longer validly lying around to save a future reload.
4253 Note that this does not detect pseudos that were reloaded
4254 for this insn in order to be stored in
4255 (obeying register constraints). That is correct; such reload
4256 registers ARE still valid. */
4257 forget_marked_reloads (®s_to_forget);
4258 CLEAR_REG_SET (®s_to_forget);
4260 /* There may have been CLOBBER insns placed after INSN. So scan
4261 between INSN and NEXT and use them to forget old reloads. */
4262 for (x = NEXT_INSN (insn); x != old_next; x = NEXT_INSN (x))
4263 if (NONJUMP_INSN_P (x) && GET_CODE (PATTERN (x)) == CLOBBER)
4264 note_stores (PATTERN (x), forget_old_reloads_1, NULL);
4267 /* Likewise for regs altered by auto-increment in this insn.
4268 REG_INC notes have been changed by reloading:
4269 find_reloads_address_1 records substitutions for them,
4270 which have been performed by subst_reloads above. */
4271 for (i = n_reloads - 1; i >= 0; i--)
4273 rtx in_reg = rld[i].in_reg;
4276 enum rtx_code code = GET_CODE (in_reg);
4277 /* PRE_INC / PRE_DEC will have the reload register ending up
4278 with the same value as the stack slot, but that doesn't
4279 hold true for POST_INC / POST_DEC. Either we have to
4280 convert the memory access to a true POST_INC / POST_DEC,
4281 or we can't use the reload register for inheritance. */
4282 if ((code == POST_INC || code == POST_DEC)
4283 && TEST_HARD_REG_BIT (reg_reloaded_valid,
4284 REGNO (rld[i].reg_rtx))
4285 /* Make sure it is the inc/dec pseudo, and not
4286 some other (e.g. output operand) pseudo. */
4287 && ((unsigned) reg_reloaded_contents[REGNO (rld[i].reg_rtx)]
4288 == REGNO (XEXP (in_reg, 0))))
4291 rtx reload_reg = rld[i].reg_rtx;
4292 enum machine_mode mode = GET_MODE (reload_reg);
4296 for (p = PREV_INSN (old_next); p != prev; p = PREV_INSN (p))
4298 /* We really want to ignore REG_INC notes here, so
4299 use PATTERN (p) as argument to reg_set_p . */
4300 if (reg_set_p (reload_reg, PATTERN (p)))
4302 n = count_occurrences (PATTERN (p), reload_reg, 0);
4308 = gen_rtx_fmt_e (code, mode, reload_reg);
4310 validate_replace_rtx_group (reload_reg,
4312 n = verify_changes (0);
4314 /* We must also verify that the constraints
4315 are met after the replacement. */
4318 n = constrain_operands (1);
4320 /* If the constraints were not met, then
4321 undo the replacement, else confirm it. */
4325 confirm_change_group ();
4331 add_reg_note (p, REG_INC, reload_reg);
4332 /* Mark this as having an output reload so that the
4333 REG_INC processing code below won't invalidate
4334 the reload for inheritance. */
4335 SET_HARD_REG_BIT (reg_is_output_reload,
4336 REGNO (reload_reg));
4337 SET_REGNO_REG_SET (®_has_output_reload,
4338 REGNO (XEXP (in_reg, 0)));
4341 forget_old_reloads_1 (XEXP (in_reg, 0), NULL_RTX,
4344 else if ((code == PRE_INC || code == PRE_DEC)
4345 && TEST_HARD_REG_BIT (reg_reloaded_valid,
4346 REGNO (rld[i].reg_rtx))
4347 /* Make sure it is the inc/dec pseudo, and not
4348 some other (e.g. output operand) pseudo. */
4349 && ((unsigned) reg_reloaded_contents[REGNO (rld[i].reg_rtx)]
4350 == REGNO (XEXP (in_reg, 0))))
4352 SET_HARD_REG_BIT (reg_is_output_reload,
4353 REGNO (rld[i].reg_rtx));
4354 SET_REGNO_REG_SET (®_has_output_reload,
4355 REGNO (XEXP (in_reg, 0)));
4357 else if (code == PRE_INC || code == PRE_DEC
4358 || code == POST_INC || code == POST_DEC)
4360 int in_regno = REGNO (XEXP (in_reg, 0));
4362 if (reg_last_reload_reg[in_regno] != NULL_RTX)
4365 bool forget_p = true;
4367 in_hard_regno = REGNO (reg_last_reload_reg[in_regno]);
4368 if (TEST_HARD_REG_BIT (reg_reloaded_valid,
4371 for (x = old_prev ? NEXT_INSN (old_prev) : insn;
4374 if (x == reg_reloaded_insn[in_hard_regno])
4380 /* If for some reasons, we didn't set up
4381 reg_last_reload_reg in this insn,
4382 invalidate inheritance from previous
4383 insns for the incremented/decremented
4384 register. Such registers will be not in
4385 reg_has_output_reload. Invalidate it
4386 also if the corresponding element in
4387 reg_reloaded_insn is also
4390 forget_old_reloads_1 (XEXP (in_reg, 0),
4396 /* If a pseudo that got a hard register is auto-incremented,
4397 we must purge records of copying it into pseudos without
4399 for (x = REG_NOTES (insn); x; x = XEXP (x, 1))
4400 if (REG_NOTE_KIND (x) == REG_INC)
4402 /* See if this pseudo reg was reloaded in this insn.
4403 If so, its last-reload info is still valid
4404 because it is based on this insn's reload. */
4405 for (i = 0; i < n_reloads; i++)
4406 if (rld[i].out == XEXP (x, 0))
4410 forget_old_reloads_1 (XEXP (x, 0), NULL_RTX, NULL);
4414 /* A reload reg's contents are unknown after a label. */
4416 CLEAR_HARD_REG_SET (reg_reloaded_valid);
4418 /* Don't assume a reload reg is still good after a call insn
4419 if it is a call-used reg, or if it contains a value that will
4420 be partially clobbered by the call. */
4421 else if (CALL_P (insn))
4423 AND_COMPL_HARD_REG_SET (reg_reloaded_valid, call_used_reg_set);
4424 AND_COMPL_HARD_REG_SET (reg_reloaded_valid, reg_reloaded_call_part_clobbered);
4429 free (reg_last_reload_reg);
4430 CLEAR_REG_SET (®_has_output_reload);
4433 /* Discard all record of any value reloaded from X,
4434 or reloaded in X from someplace else;
4435 unless X is an output reload reg of the current insn.
4437 X may be a hard reg (the reload reg)
4438 or it may be a pseudo reg that was reloaded from.
4440 When DATA is non-NULL just mark the registers in regset
4441 to be forgotten later. */
4444 forget_old_reloads_1 (rtx x, const_rtx ignored ATTRIBUTE_UNUSED,
4449 regset regs = (regset) data;
4451 /* note_stores does give us subregs of hard regs,
4452 subreg_regno_offset requires a hard reg. */
4453 while (GET_CODE (x) == SUBREG)
4455 /* We ignore the subreg offset when calculating the regno,
4456 because we are using the entire underlying hard register
4466 if (regno >= FIRST_PSEUDO_REGISTER)
4472 nr = hard_regno_nregs[regno][GET_MODE (x)];
4473 /* Storing into a spilled-reg invalidates its contents.
4474 This can happen if a block-local pseudo is allocated to that reg
4475 and it wasn't spilled because this block's total need is 0.
4476 Then some insn might have an optional reload and use this reg. */
4478 for (i = 0; i < nr; i++)
4479 /* But don't do this if the reg actually serves as an output
4480 reload reg in the current instruction. */
4482 || ! TEST_HARD_REG_BIT (reg_is_output_reload, regno + i))
4484 CLEAR_HARD_REG_BIT (reg_reloaded_valid, regno + i);
4485 spill_reg_store[regno + i] = 0;
4491 SET_REGNO_REG_SET (regs, regno + nr);
4494 /* Since value of X has changed,
4495 forget any value previously copied from it. */
4498 /* But don't forget a copy if this is the output reload
4499 that establishes the copy's validity. */
4501 || !REGNO_REG_SET_P (®_has_output_reload, regno + nr))
4502 reg_last_reload_reg[regno + nr] = 0;
4506 /* Forget the reloads marked in regset by previous function. */
4508 forget_marked_reloads (regset regs)
4511 reg_set_iterator rsi;
4512 EXECUTE_IF_SET_IN_REG_SET (regs, 0, reg, rsi)
4514 if (reg < FIRST_PSEUDO_REGISTER
4515 /* But don't do this if the reg actually serves as an output
4516 reload reg in the current instruction. */
4518 || ! TEST_HARD_REG_BIT (reg_is_output_reload, reg)))
4520 CLEAR_HARD_REG_BIT (reg_reloaded_valid, reg);
4521 spill_reg_store[reg] = 0;
4524 || !REGNO_REG_SET_P (®_has_output_reload, reg))
4525 reg_last_reload_reg[reg] = 0;
4529 /* The following HARD_REG_SETs indicate when each hard register is
4530 used for a reload of various parts of the current insn. */
4532 /* If reg is unavailable for all reloads. */
4533 static HARD_REG_SET reload_reg_unavailable;
4534 /* If reg is in use as a reload reg for a RELOAD_OTHER reload. */
4535 static HARD_REG_SET reload_reg_used;
4536 /* If reg is in use for a RELOAD_FOR_INPUT_ADDRESS reload for operand I. */
4537 static HARD_REG_SET reload_reg_used_in_input_addr[MAX_RECOG_OPERANDS];
4538 /* If reg is in use for a RELOAD_FOR_INPADDR_ADDRESS reload for operand I. */
4539 static HARD_REG_SET reload_reg_used_in_inpaddr_addr[MAX_RECOG_OPERANDS];
4540 /* If reg is in use for a RELOAD_FOR_OUTPUT_ADDRESS reload for operand I. */
4541 static HARD_REG_SET reload_reg_used_in_output_addr[MAX_RECOG_OPERANDS];
4542 /* If reg is in use for a RELOAD_FOR_OUTADDR_ADDRESS reload for operand I. */
4543 static HARD_REG_SET reload_reg_used_in_outaddr_addr[MAX_RECOG_OPERANDS];
4544 /* If reg is in use for a RELOAD_FOR_INPUT reload for operand I. */
4545 static HARD_REG_SET reload_reg_used_in_input[MAX_RECOG_OPERANDS];
4546 /* If reg is in use for a RELOAD_FOR_OUTPUT reload for operand I. */
4547 static HARD_REG_SET reload_reg_used_in_output[MAX_RECOG_OPERANDS];
4548 /* If reg is in use for a RELOAD_FOR_OPERAND_ADDRESS reload. */
4549 static HARD_REG_SET reload_reg_used_in_op_addr;
4550 /* If reg is in use for a RELOAD_FOR_OPADDR_ADDR reload. */
4551 static HARD_REG_SET reload_reg_used_in_op_addr_reload;
4552 /* If reg is in use for a RELOAD_FOR_INSN reload. */
4553 static HARD_REG_SET reload_reg_used_in_insn;
4554 /* If reg is in use for a RELOAD_FOR_OTHER_ADDRESS reload. */
4555 static HARD_REG_SET reload_reg_used_in_other_addr;
4557 /* If reg is in use as a reload reg for any sort of reload. */
4558 static HARD_REG_SET reload_reg_used_at_all;
4560 /* If reg is use as an inherited reload. We just mark the first register
4562 static HARD_REG_SET reload_reg_used_for_inherit;
4564 /* Records which hard regs are used in any way, either as explicit use or
4565 by being allocated to a pseudo during any point of the current insn. */
4566 static HARD_REG_SET reg_used_in_insn;
4568 /* Mark reg REGNO as in use for a reload of the sort spec'd by OPNUM and
4569 TYPE. MODE is used to indicate how many consecutive regs are
4573 mark_reload_reg_in_use (unsigned int regno, int opnum, enum reload_type type,
4574 enum machine_mode mode)
4576 unsigned int nregs = hard_regno_nregs[regno][mode];
4579 for (i = regno; i < nregs + regno; i++)
4584 SET_HARD_REG_BIT (reload_reg_used, i);
4587 case RELOAD_FOR_INPUT_ADDRESS:
4588 SET_HARD_REG_BIT (reload_reg_used_in_input_addr[opnum], i);
4591 case RELOAD_FOR_INPADDR_ADDRESS:
4592 SET_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[opnum], i);
4595 case RELOAD_FOR_OUTPUT_ADDRESS:
4596 SET_HARD_REG_BIT (reload_reg_used_in_output_addr[opnum], i);
4599 case RELOAD_FOR_OUTADDR_ADDRESS:
4600 SET_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[opnum], i);
4603 case RELOAD_FOR_OPERAND_ADDRESS:
4604 SET_HARD_REG_BIT (reload_reg_used_in_op_addr, i);
4607 case RELOAD_FOR_OPADDR_ADDR:
4608 SET_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, i);
4611 case RELOAD_FOR_OTHER_ADDRESS:
4612 SET_HARD_REG_BIT (reload_reg_used_in_other_addr, i);
4615 case RELOAD_FOR_INPUT:
4616 SET_HARD_REG_BIT (reload_reg_used_in_input[opnum], i);
4619 case RELOAD_FOR_OUTPUT:
4620 SET_HARD_REG_BIT (reload_reg_used_in_output[opnum], i);
4623 case RELOAD_FOR_INSN:
4624 SET_HARD_REG_BIT (reload_reg_used_in_insn, i);
4628 SET_HARD_REG_BIT (reload_reg_used_at_all, i);
4632 /* Similarly, but show REGNO is no longer in use for a reload. */
4635 clear_reload_reg_in_use (unsigned int regno, int opnum,
4636 enum reload_type type, enum machine_mode mode)
4638 unsigned int nregs = hard_regno_nregs[regno][mode];
4639 unsigned int start_regno, end_regno, r;
4641 /* A complication is that for some reload types, inheritance might
4642 allow multiple reloads of the same types to share a reload register.
4643 We set check_opnum if we have to check only reloads with the same
4644 operand number, and check_any if we have to check all reloads. */
4645 int check_opnum = 0;
4647 HARD_REG_SET *used_in_set;
4652 used_in_set = &reload_reg_used;
4655 case RELOAD_FOR_INPUT_ADDRESS:
4656 used_in_set = &reload_reg_used_in_input_addr[opnum];
4659 case RELOAD_FOR_INPADDR_ADDRESS:
4661 used_in_set = &reload_reg_used_in_inpaddr_addr[opnum];
4664 case RELOAD_FOR_OUTPUT_ADDRESS:
4665 used_in_set = &reload_reg_used_in_output_addr[opnum];
4668 case RELOAD_FOR_OUTADDR_ADDRESS:
4670 used_in_set = &reload_reg_used_in_outaddr_addr[opnum];
4673 case RELOAD_FOR_OPERAND_ADDRESS:
4674 used_in_set = &reload_reg_used_in_op_addr;
4677 case RELOAD_FOR_OPADDR_ADDR:
4679 used_in_set = &reload_reg_used_in_op_addr_reload;
4682 case RELOAD_FOR_OTHER_ADDRESS:
4683 used_in_set = &reload_reg_used_in_other_addr;
4687 case RELOAD_FOR_INPUT:
4688 used_in_set = &reload_reg_used_in_input[opnum];
4691 case RELOAD_FOR_OUTPUT:
4692 used_in_set = &reload_reg_used_in_output[opnum];
4695 case RELOAD_FOR_INSN:
4696 used_in_set = &reload_reg_used_in_insn;
4701 /* We resolve conflicts with remaining reloads of the same type by
4702 excluding the intervals of reload registers by them from the
4703 interval of freed reload registers. Since we only keep track of
4704 one set of interval bounds, we might have to exclude somewhat
4705 more than what would be necessary if we used a HARD_REG_SET here.
4706 But this should only happen very infrequently, so there should
4707 be no reason to worry about it. */
4709 start_regno = regno;
4710 end_regno = regno + nregs;
4711 if (check_opnum || check_any)
4713 for (i = n_reloads - 1; i >= 0; i--)
4715 if (rld[i].when_needed == type
4716 && (check_any || rld[i].opnum == opnum)
4719 unsigned int conflict_start = true_regnum (rld[i].reg_rtx);
4720 unsigned int conflict_end
4721 = end_hard_regno (rld[i].mode, conflict_start);
4723 /* If there is an overlap with the first to-be-freed register,
4724 adjust the interval start. */
4725 if (conflict_start <= start_regno && conflict_end > start_regno)
4726 start_regno = conflict_end;
4727 /* Otherwise, if there is a conflict with one of the other
4728 to-be-freed registers, adjust the interval end. */
4729 if (conflict_start > start_regno && conflict_start < end_regno)
4730 end_regno = conflict_start;
4735 for (r = start_regno; r < end_regno; r++)
4736 CLEAR_HARD_REG_BIT (*used_in_set, r);
4739 /* 1 if reg REGNO is free as a reload reg for a reload of the sort
4740 specified by OPNUM and TYPE. */
4743 reload_reg_free_p (unsigned int regno, int opnum, enum reload_type type)
4747 /* In use for a RELOAD_OTHER means it's not available for anything. */
4748 if (TEST_HARD_REG_BIT (reload_reg_used, regno)
4749 || TEST_HARD_REG_BIT (reload_reg_unavailable, regno))
4755 /* In use for anything means we can't use it for RELOAD_OTHER. */
4756 if (TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno)
4757 || TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)
4758 || TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno)
4759 || TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno))
4762 for (i = 0; i < reload_n_operands; i++)
4763 if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)
4764 || TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[i], regno)
4765 || TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
4766 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno)
4767 || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)
4768 || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4773 case RELOAD_FOR_INPUT:
4774 if (TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)
4775 || TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno))
4778 if (TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno))
4781 /* If it is used for some other input, can't use it. */
4782 for (i = 0; i < reload_n_operands; i++)
4783 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4786 /* If it is used in a later operand's address, can't use it. */
4787 for (i = opnum + 1; i < reload_n_operands; i++)
4788 if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)
4789 || TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[i], regno))
4794 case RELOAD_FOR_INPUT_ADDRESS:
4795 /* Can't use a register if it is used for an input address for this
4796 operand or used as an input in an earlier one. */
4797 if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[opnum], regno)
4798 || TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[opnum], regno))
4801 for (i = 0; i < opnum; i++)
4802 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4807 case RELOAD_FOR_INPADDR_ADDRESS:
4808 /* Can't use a register if it is used for an input address
4809 for this operand or used as an input in an earlier
4811 if (TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[opnum], regno))
4814 for (i = 0; i < opnum; i++)
4815 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4820 case RELOAD_FOR_OUTPUT_ADDRESS:
4821 /* Can't use a register if it is used for an output address for this
4822 operand or used as an output in this or a later operand. Note
4823 that multiple output operands are emitted in reverse order, so
4824 the conflicting ones are those with lower indices. */
4825 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[opnum], regno))
4828 for (i = 0; i <= opnum; i++)
4829 if (TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4834 case RELOAD_FOR_OUTADDR_ADDRESS:
4835 /* Can't use a register if it is used for an output address
4836 for this operand or used as an output in this or a
4837 later operand. Note that multiple output operands are
4838 emitted in reverse order, so the conflicting ones are
4839 those with lower indices. */
4840 if (TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[opnum], regno))
4843 for (i = 0; i <= opnum; i++)
4844 if (TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4849 case RELOAD_FOR_OPERAND_ADDRESS:
4850 for (i = 0; i < reload_n_operands; i++)
4851 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4854 return (! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)
4855 && ! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno));
4857 case RELOAD_FOR_OPADDR_ADDR:
4858 for (i = 0; i < reload_n_operands; i++)
4859 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4862 return (!TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno));
4864 case RELOAD_FOR_OUTPUT:
4865 /* This cannot share a register with RELOAD_FOR_INSN reloads, other
4866 outputs, or an operand address for this or an earlier output.
4867 Note that multiple output operands are emitted in reverse order,
4868 so the conflicting ones are those with higher indices. */
4869 if (TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno))
4872 for (i = 0; i < reload_n_operands; i++)
4873 if (TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4876 for (i = opnum; i < reload_n_operands; i++)
4877 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
4878 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno))
4883 case RELOAD_FOR_INSN:
4884 for (i = 0; i < reload_n_operands; i++)
4885 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)
4886 || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4889 return (! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)
4890 && ! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno));
4892 case RELOAD_FOR_OTHER_ADDRESS:
4893 return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno);
4900 /* Return 1 if the value in reload reg REGNO, as used by a reload
4901 needed for the part of the insn specified by OPNUM and TYPE,
4902 is still available in REGNO at the end of the insn.
4904 We can assume that the reload reg was already tested for availability
4905 at the time it is needed, and we should not check this again,
4906 in case the reg has already been marked in use. */
4909 reload_reg_reaches_end_p (unsigned int regno, int opnum, enum reload_type type)
4916 /* Since a RELOAD_OTHER reload claims the reg for the entire insn,
4917 its value must reach the end. */
4920 /* If this use is for part of the insn,
4921 its value reaches if no subsequent part uses the same register.
4922 Just like the above function, don't try to do this with lots
4925 case RELOAD_FOR_OTHER_ADDRESS:
4926 /* Here we check for everything else, since these don't conflict
4927 with anything else and everything comes later. */
4929 for (i = 0; i < reload_n_operands; i++)
4930 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
4931 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno)
4932 || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)
4933 || TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)
4934 || TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[i], regno)
4935 || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4938 return (! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)
4939 && ! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno)
4940 && ! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)
4941 && ! TEST_HARD_REG_BIT (reload_reg_used, regno));
4943 case RELOAD_FOR_INPUT_ADDRESS:
4944 case RELOAD_FOR_INPADDR_ADDRESS:
4945 /* Similar, except that we check only for this and subsequent inputs
4946 and the address of only subsequent inputs and we do not need
4947 to check for RELOAD_OTHER objects since they are known not to
4950 for (i = opnum; i < reload_n_operands; i++)
4951 if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4954 for (i = opnum + 1; i < reload_n_operands; i++)
4955 if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)
4956 || TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[i], regno))
4959 for (i = 0; i < reload_n_operands; i++)
4960 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
4961 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno)
4962 || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4965 if (TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno))
4968 return (!TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)
4969 && !TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)
4970 && !TEST_HARD_REG_BIT (reload_reg_used, regno));
4972 case RELOAD_FOR_INPUT:
4973 /* Similar to input address, except we start at the next operand for
4974 both input and input address and we do not check for
4975 RELOAD_FOR_OPERAND_ADDRESS and RELOAD_FOR_INSN since these
4978 for (i = opnum + 1; i < reload_n_operands; i++)
4979 if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)
4980 || TEST_HARD_REG_BIT (reload_reg_used_in_inpaddr_addr[i], regno)
4981 || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno))
4984 /* ... fall through ... */
4986 case RELOAD_FOR_OPERAND_ADDRESS:
4987 /* Check outputs and their addresses. */
4989 for (i = 0; i < reload_n_operands; i++)
4990 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
4991 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno)
4992 || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
4995 return (!TEST_HARD_REG_BIT (reload_reg_used, regno));
4997 case RELOAD_FOR_OPADDR_ADDR:
4998 for (i = 0; i < reload_n_operands; i++)
4999 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
5000 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno)
5001 || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno))
5004 return (!TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)
5005 && !TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)
5006 && !TEST_HARD_REG_BIT (reload_reg_used, regno));
5008 case RELOAD_FOR_INSN:
5009 /* These conflict with other outputs with RELOAD_OTHER. So
5010 we need only check for output addresses. */
5012 opnum = reload_n_operands;
5014 /* ... fall through ... */
5016 case RELOAD_FOR_OUTPUT:
5017 case RELOAD_FOR_OUTPUT_ADDRESS:
5018 case RELOAD_FOR_OUTADDR_ADDRESS:
5019 /* We already know these can't conflict with a later output. So the
5020 only thing to check are later output addresses.
5021 Note that multiple output operands are emitted in reverse order,
5022 so the conflicting ones are those with lower indices. */
5023 for (i = 0; i < opnum; i++)
5024 if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)
5025 || TEST_HARD_REG_BIT (reload_reg_used_in_outaddr_addr[i], regno))
5035 /* Like reload_reg_reaches_end_p, but check that the condition holds for
5036 every register in the range [REGNO, REGNO + NREGS). */
5039 reload_regs_reach_end_p (unsigned int regno, int nregs,
5040 int opnum, enum reload_type type)
5044 for (i = 0; i < nregs; i++)
5045 if (!reload_reg_reaches_end_p (regno + i, opnum, type))
5051 /* Returns whether R1 and R2 are uniquely chained: the value of one
5052 is used by the other, and that value is not used by any other
5053 reload for this insn. This is used to partially undo the decision
5054 made in find_reloads when in the case of multiple
5055 RELOAD_FOR_OPERAND_ADDRESS reloads it converts all
5056 RELOAD_FOR_OPADDR_ADDR reloads into RELOAD_FOR_OPERAND_ADDRESS
5057 reloads. This code tries to avoid the conflict created by that
5058 change. It might be cleaner to explicitly keep track of which
5059 RELOAD_FOR_OPADDR_ADDR reload is associated with which
5060 RELOAD_FOR_OPERAND_ADDRESS reload, rather than to try to detect
5061 this after the fact. */
5063 reloads_unique_chain_p (int r1, int r2)
5067 /* We only check input reloads. */
5068 if (! rld[r1].in || ! rld[r2].in)
5071 /* Avoid anything with output reloads. */
5072 if (rld[r1].out || rld[r2].out)
5075 /* "chained" means one reload is a component of the other reload,
5076 not the same as the other reload. */
5077 if (rld[r1].opnum != rld[r2].opnum
5078 || rtx_equal_p (rld[r1].in, rld[r2].in)
5079 || rld[r1].optional || rld[r2].optional
5080 || ! (reg_mentioned_p (rld[r1].in, rld[r2].in)
5081 || reg_mentioned_p (rld[r2].in, rld[r1].in)))
5084 for (i = 0; i < n_reloads; i ++)
5085 /* Look for input reloads that aren't our two */
5086 if (i != r1 && i != r2 && rld[i].in)
5088 /* If our reload is mentioned at all, it isn't a simple chain. */
5089 if (reg_mentioned_p (rld[r1].in, rld[i].in))
5096 /* The recursive function change all occurrences of WHAT in *WHERE
5099 substitute (rtx *where, const_rtx what, rtx repl)
5108 if (*where == what || rtx_equal_p (*where, what))
5114 code = GET_CODE (*where);
5115 fmt = GET_RTX_FORMAT (code);
5116 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
5122 for (j = XVECLEN (*where, i) - 1; j >= 0; j--)
5123 substitute (&XVECEXP (*where, i, j), what, repl);
5125 else if (fmt[i] == 'e')
5126 substitute (&XEXP (*where, i), what, repl);
5130 /* The function returns TRUE if chain of reload R1 and R2 (in any
5131 order) can be evaluated without usage of intermediate register for
5132 the reload containing another reload. It is important to see
5133 gen_reload to understand what the function is trying to do. As an
5134 example, let us have reload chain
5137 r1: <something> + const
5139 and reload R2 got reload reg HR. The function returns true if
5140 there is a correct insn HR = HR + <something>. Otherwise,
5141 gen_reload will use intermediate register (and this is the reload
5142 reg for R1) to reload <something>.
5144 We need this function to find a conflict for chain reloads. In our
5145 example, if HR = HR + <something> is incorrect insn, then we cannot
5146 use HR as a reload register for R2. If we do use it then we get a
5155 gen_reload_chain_without_interm_reg_p (int r1, int r2)
5159 rtx out, in, tem, insn;
5160 rtx last = get_last_insn ();
5162 /* Make r2 a component of r1. */
5163 if (reg_mentioned_p (rld[r1].in, rld[r2].in))
5169 gcc_assert (reg_mentioned_p (rld[r2].in, rld[r1].in));
5170 regno = rld[r1].regno >= 0 ? rld[r1].regno : rld[r2].regno;
5171 gcc_assert (regno >= 0);
5172 out = gen_rtx_REG (rld[r1].mode, regno);
5173 in = copy_rtx (rld[r1].in);
5174 substitute (&in, rld[r2].in, gen_rtx_REG (rld[r2].mode, regno));
5176 /* If IN is a paradoxical SUBREG, remove it and try to put the
5177 opposite SUBREG on OUT. Likewise for a paradoxical SUBREG on OUT. */
5178 if (GET_CODE (in) == SUBREG
5179 && (GET_MODE_SIZE (GET_MODE (in))
5180 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (in))))
5181 && (tem = gen_lowpart_common (GET_MODE (SUBREG_REG (in)), out)) != 0)
5182 in = SUBREG_REG (in), out = tem;
5184 if (GET_CODE (in) == PLUS
5185 && (REG_P (XEXP (in, 0))
5186 || GET_CODE (XEXP (in, 0)) == SUBREG
5187 || MEM_P (XEXP (in, 0)))
5188 && (REG_P (XEXP (in, 1))
5189 || GET_CODE (XEXP (in, 1)) == SUBREG
5190 || CONSTANT_P (XEXP (in, 1))
5191 || MEM_P (XEXP (in, 1))))
5193 insn = emit_insn (gen_rtx_SET (VOIDmode, out, in));
5194 code = recog_memoized (insn);
5199 extract_insn (insn);
5200 /* We want constrain operands to treat this insn strictly in
5201 its validity determination, i.e., the way it would after
5202 reload has completed. */
5203 result = constrain_operands (1);
5206 delete_insns_since (last);
5210 /* It looks like other cases in gen_reload are not possible for
5211 chain reloads or do need an intermediate hard registers. */
5215 /* Return 1 if the reloads denoted by R1 and R2 cannot share a register.
5218 This function uses the same algorithm as reload_reg_free_p above. */
5221 reloads_conflict (int r1, int r2)
5223 enum reload_type r1_type = rld[r1].when_needed;
5224 enum reload_type r2_type = rld[r2].when_needed;
5225 int r1_opnum = rld[r1].opnum;
5226 int r2_opnum = rld[r2].opnum;
5228 /* RELOAD_OTHER conflicts with everything. */
5229 if (r2_type == RELOAD_OTHER)
5232 /* Otherwise, check conflicts differently for each type. */
5236 case RELOAD_FOR_INPUT:
5237 return (r2_type == RELOAD_FOR_INSN
5238 || r2_type == RELOAD_FOR_OPERAND_ADDRESS
5239 || r2_type == RELOAD_FOR_OPADDR_ADDR
5240 || r2_type == RELOAD_FOR_INPUT
5241 || ((r2_type == RELOAD_FOR_INPUT_ADDRESS
5242 || r2_type == RELOAD_FOR_INPADDR_ADDRESS)
5243 && r2_opnum > r1_opnum));
5245 case RELOAD_FOR_INPUT_ADDRESS:
5246 return ((r2_type == RELOAD_FOR_INPUT_ADDRESS && r1_opnum == r2_opnum)
5247 || (r2_type == RELOAD_FOR_INPUT && r2_opnum < r1_opnum));
5249 case RELOAD_FOR_INPADDR_ADDRESS:
5250 return ((r2_type == RELOAD_FOR_INPADDR_ADDRESS && r1_opnum == r2_opnum)
5251 || (r2_type == RELOAD_FOR_INPUT && r2_opnum < r1_opnum));
5253 case RELOAD_FOR_OUTPUT_ADDRESS:
5254 return ((r2_type == RELOAD_FOR_OUTPUT_ADDRESS && r2_opnum == r1_opnum)
5255 || (r2_type == RELOAD_FOR_OUTPUT && r2_opnum <= r1_opnum));
5257 case RELOAD_FOR_OUTADDR_ADDRESS:
5258 return ((r2_type == RELOAD_FOR_OUTADDR_ADDRESS && r2_opnum == r1_opnum)
5259 || (r2_type == RELOAD_FOR_OUTPUT && r2_opnum <= r1_opnum));
5261 case RELOAD_FOR_OPERAND_ADDRESS:
5262 return (r2_type == RELOAD_FOR_INPUT || r2_type == RELOAD_FOR_INSN
5263 || (r2_type == RELOAD_FOR_OPERAND_ADDRESS
5264 && (!reloads_unique_chain_p (r1, r2)
5265 || !gen_reload_chain_without_interm_reg_p (r1, r2))));
5267 case RELOAD_FOR_OPADDR_ADDR:
5268 return (r2_type == RELOAD_FOR_INPUT
5269 || r2_type == RELOAD_FOR_OPADDR_ADDR);
5271 case RELOAD_FOR_OUTPUT:
5272 return (r2_type == RELOAD_FOR_INSN || r2_type == RELOAD_FOR_OUTPUT
5273 || ((r2_type == RELOAD_FOR_OUTPUT_ADDRESS
5274 || r2_type == RELOAD_FOR_OUTADDR_ADDRESS)
5275 && r2_opnum >= r1_opnum));
5277 case RELOAD_FOR_INSN:
5278 return (r2_type == RELOAD_FOR_INPUT || r2_type == RELOAD_FOR_OUTPUT
5279 || r2_type == RELOAD_FOR_INSN
5280 || r2_type == RELOAD_FOR_OPERAND_ADDRESS);
5282 case RELOAD_FOR_OTHER_ADDRESS:
5283 return r2_type == RELOAD_FOR_OTHER_ADDRESS;
5293 /* Indexed by reload number, 1 if incoming value
5294 inherited from previous insns. */
5295 static char reload_inherited[MAX_RELOADS];
5297 /* For an inherited reload, this is the insn the reload was inherited from,
5298 if we know it. Otherwise, this is 0. */
5299 static rtx reload_inheritance_insn[MAX_RELOADS];
5301 /* If nonzero, this is a place to get the value of the reload,
5302 rather than using reload_in. */
5303 static rtx reload_override_in[MAX_RELOADS];
5305 /* For each reload, the hard register number of the register used,
5306 or -1 if we did not need a register for this reload. */
5307 static int reload_spill_index[MAX_RELOADS];
5309 /* Index X is the value of rld[X].reg_rtx, adjusted for the input mode. */
5310 static rtx reload_reg_rtx_for_input[MAX_RELOADS];
5312 /* Index X is the value of rld[X].reg_rtx, adjusted for the output mode. */
5313 static rtx reload_reg_rtx_for_output[MAX_RELOADS];
5315 /* Subroutine of free_for_value_p, used to check a single register.
5316 START_REGNO is the starting regno of the full reload register
5317 (possibly comprising multiple hard registers) that we are considering. */
5320 reload_reg_free_for_value_p (int start_regno, int regno, int opnum,
5321 enum reload_type type, rtx value, rtx out,
5322 int reloadnum, int ignore_address_reloads)
5325 /* Set if we see an input reload that must not share its reload register
5326 with any new earlyclobber, but might otherwise share the reload
5327 register with an output or input-output reload. */
5328 int check_earlyclobber = 0;
5332 if (TEST_HARD_REG_BIT (reload_reg_unavailable, regno))
5335 if (out == const0_rtx)
5341 /* We use some pseudo 'time' value to check if the lifetimes of the
5342 new register use would overlap with the one of a previous reload
5343 that is not read-only or uses a different value.
5344 The 'time' used doesn't have to be linear in any shape or form, just
5346 Some reload types use different 'buckets' for each operand.
5347 So there are MAX_RECOG_OPERANDS different time values for each
5349 We compute TIME1 as the time when the register for the prospective
5350 new reload ceases to be live, and TIME2 for each existing
5351 reload as the time when that the reload register of that reload
5353 Where there is little to be gained by exact lifetime calculations,
5354 we just make conservative assumptions, i.e. a longer lifetime;
5355 this is done in the 'default:' cases. */
5358 case RELOAD_FOR_OTHER_ADDRESS:
5359 /* RELOAD_FOR_OTHER_ADDRESS conflicts with RELOAD_OTHER reloads. */
5360 time1 = copy ? 0 : 1;
5363 time1 = copy ? 1 : MAX_RECOG_OPERANDS * 5 + 5;
5365 /* For each input, we may have a sequence of RELOAD_FOR_INPADDR_ADDRESS,
5366 RELOAD_FOR_INPUT_ADDRESS and RELOAD_FOR_INPUT. By adding 0 / 1 / 2 ,
5367 respectively, to the time values for these, we get distinct time
5368 values. To get distinct time values for each operand, we have to
5369 multiply opnum by at least three. We round that up to four because
5370 multiply by four is often cheaper. */
5371 case RELOAD_FOR_INPADDR_ADDRESS:
5372 time1 = opnum * 4 + 2;
5374 case RELOAD_FOR_INPUT_ADDRESS:
5375 time1 = opnum * 4 + 3;
5377 case RELOAD_FOR_INPUT:
5378 /* All RELOAD_FOR_INPUT reloads remain live till the instruction
5379 executes (inclusive). */
5380 time1 = copy ? opnum * 4 + 4 : MAX_RECOG_OPERANDS * 4 + 3;
5382 case RELOAD_FOR_OPADDR_ADDR:
5384 <= (MAX_RECOG_OPERANDS - 1) * 4 + 4 == MAX_RECOG_OPERANDS * 4 */
5385 time1 = MAX_RECOG_OPERANDS * 4 + 1;
5387 case RELOAD_FOR_OPERAND_ADDRESS:
5388 /* RELOAD_FOR_OPERAND_ADDRESS reloads are live even while the insn
5390 time1 = copy ? MAX_RECOG_OPERANDS * 4 + 2 : MAX_RECOG_OPERANDS * 4 + 3;
5392 case RELOAD_FOR_OUTADDR_ADDRESS:
5393 time1 = MAX_RECOG_OPERANDS * 4 + 4 + opnum;
5395 case RELOAD_FOR_OUTPUT_ADDRESS:
5396 time1 = MAX_RECOG_OPERANDS * 4 + 5 + opnum;
5399 time1 = MAX_RECOG_OPERANDS * 5 + 5;
5402 for (i = 0; i < n_reloads; i++)
5404 rtx reg = rld[i].reg_rtx;
5405 if (reg && REG_P (reg)
5406 && ((unsigned) regno - true_regnum (reg)
5407 <= hard_regno_nregs[REGNO (reg)][GET_MODE (reg)] - (unsigned) 1)
5410 rtx other_input = rld[i].in;
5412 /* If the other reload loads the same input value, that
5413 will not cause a conflict only if it's loading it into
5414 the same register. */
5415 if (true_regnum (reg) != start_regno)
5416 other_input = NULL_RTX;
5417 if (! other_input || ! rtx_equal_p (other_input, value)
5418 || rld[i].out || out)
5421 switch (rld[i].when_needed)
5423 case RELOAD_FOR_OTHER_ADDRESS:
5426 case RELOAD_FOR_INPADDR_ADDRESS:
5427 /* find_reloads makes sure that a
5428 RELOAD_FOR_{INP,OP,OUT}ADDR_ADDRESS reload is only used
5429 by at most one - the first -
5430 RELOAD_FOR_{INPUT,OPERAND,OUTPUT}_ADDRESS . If the
5431 address reload is inherited, the address address reload
5432 goes away, so we can ignore this conflict. */
5433 if (type == RELOAD_FOR_INPUT_ADDRESS && reloadnum == i + 1
5434 && ignore_address_reloads
5435 /* Unless the RELOAD_FOR_INPUT is an auto_inc expression.
5436 Then the address address is still needed to store
5437 back the new address. */
5438 && ! rld[reloadnum].out)
5440 /* Likewise, if a RELOAD_FOR_INPUT can inherit a value, its
5441 RELOAD_FOR_INPUT_ADDRESS / RELOAD_FOR_INPADDR_ADDRESS
5443 if (type == RELOAD_FOR_INPUT && opnum == rld[i].opnum
5444 && ignore_address_reloads
5445 /* Unless we are reloading an auto_inc expression. */
5446 && ! rld[reloadnum].out)
5448 time2 = rld[i].opnum * 4 + 2;
5450 case RELOAD_FOR_INPUT_ADDRESS:
5451 if (type == RELOAD_FOR_INPUT && opnum == rld[i].opnum
5452 && ignore_address_reloads
5453 && ! rld[reloadnum].out)
5455 time2 = rld[i].opnum * 4 + 3;
5457 case RELOAD_FOR_INPUT:
5458 time2 = rld[i].opnum * 4 + 4;
5459 check_earlyclobber = 1;
5461 /* rld[i].opnum * 4 + 4 <= (MAX_RECOG_OPERAND - 1) * 4 + 4
5462 == MAX_RECOG_OPERAND * 4 */
5463 case RELOAD_FOR_OPADDR_ADDR:
5464 if (type == RELOAD_FOR_OPERAND_ADDRESS && reloadnum == i + 1
5465 && ignore_address_reloads
5466 && ! rld[reloadnum].out)
5468 time2 = MAX_RECOG_OPERANDS * 4 + 1;
5470 case RELOAD_FOR_OPERAND_ADDRESS:
5471 time2 = MAX_RECOG_OPERANDS * 4 + 2;
5472 check_earlyclobber = 1;
5474 case RELOAD_FOR_INSN:
5475 time2 = MAX_RECOG_OPERANDS * 4 + 3;
5477 case RELOAD_FOR_OUTPUT:
5478 /* All RELOAD_FOR_OUTPUT reloads become live just after the
5479 instruction is executed. */
5480 time2 = MAX_RECOG_OPERANDS * 4 + 4;
5482 /* The first RELOAD_FOR_OUTADDR_ADDRESS reload conflicts with
5483 the RELOAD_FOR_OUTPUT reloads, so assign it the same time
5485 case RELOAD_FOR_OUTADDR_ADDRESS:
5486 if (type == RELOAD_FOR_OUTPUT_ADDRESS && reloadnum == i + 1
5487 && ignore_address_reloads
5488 && ! rld[reloadnum].out)
5490 time2 = MAX_RECOG_OPERANDS * 4 + 4 + rld[i].opnum;
5492 case RELOAD_FOR_OUTPUT_ADDRESS:
5493 time2 = MAX_RECOG_OPERANDS * 4 + 5 + rld[i].opnum;
5496 /* If there is no conflict in the input part, handle this
5497 like an output reload. */
5498 if (! rld[i].in || rtx_equal_p (other_input, value))
5500 time2 = MAX_RECOG_OPERANDS * 4 + 4;
5501 /* Earlyclobbered outputs must conflict with inputs. */
5502 if (earlyclobber_operand_p (rld[i].out))
5503 time2 = MAX_RECOG_OPERANDS * 4 + 3;
5508 /* RELOAD_OTHER might be live beyond instruction execution,
5509 but this is not obvious when we set time2 = 1. So check
5510 here if there might be a problem with the new reload
5511 clobbering the register used by the RELOAD_OTHER. */
5519 && (! rld[i].in || rld[i].out
5520 || ! rtx_equal_p (other_input, value)))
5521 || (out && rld[reloadnum].out_reg
5522 && time2 >= MAX_RECOG_OPERANDS * 4 + 3))
5528 /* Earlyclobbered outputs must conflict with inputs. */
5529 if (check_earlyclobber && out && earlyclobber_operand_p (out))
5535 /* Return 1 if the value in reload reg REGNO, as used by a reload
5536 needed for the part of the insn specified by OPNUM and TYPE,
5537 may be used to load VALUE into it.
5539 MODE is the mode in which the register is used, this is needed to
5540 determine how many hard regs to test.
5542 Other read-only reloads with the same value do not conflict
5543 unless OUT is nonzero and these other reloads have to live while
5544 output reloads live.
5545 If OUT is CONST0_RTX, this is a special case: it means that the
5546 test should not be for using register REGNO as reload register, but
5547 for copying from register REGNO into the reload register.
5549 RELOADNUM is the number of the reload we want to load this value for;
5550 a reload does not conflict with itself.
5552 When IGNORE_ADDRESS_RELOADS is set, we can not have conflicts with
5553 reloads that load an address for the very reload we are considering.
5555 The caller has to make sure that there is no conflict with the return
5559 free_for_value_p (int regno, enum machine_mode mode, int opnum,
5560 enum reload_type type, rtx value, rtx out, int reloadnum,
5561 int ignore_address_reloads)
5563 int nregs = hard_regno_nregs[regno][mode];
5565 if (! reload_reg_free_for_value_p (regno, regno + nregs, opnum, type,
5566 value, out, reloadnum,
5567 ignore_address_reloads))
5572 /* Return nonzero if the rtx X is invariant over the current function. */
5573 /* ??? Actually, the places where we use this expect exactly what is
5574 tested here, and not everything that is function invariant. In
5575 particular, the frame pointer and arg pointer are special cased;
5576 pic_offset_table_rtx is not, and we must not spill these things to
5580 function_invariant_p (const_rtx x)
5584 if (x == frame_pointer_rtx || x == arg_pointer_rtx)
5586 if (GET_CODE (x) == PLUS
5587 && (XEXP (x, 0) == frame_pointer_rtx || XEXP (x, 0) == arg_pointer_rtx)
5588 && CONSTANT_P (XEXP (x, 1)))
5593 /* Determine whether the reload reg X overlaps any rtx'es used for
5594 overriding inheritance. Return nonzero if so. */
5597 conflicts_with_override (rtx x)
5600 for (i = 0; i < n_reloads; i++)
5601 if (reload_override_in[i]
5602 && reg_overlap_mentioned_p (x, reload_override_in[i]))
5607 /* Give an error message saying we failed to find a reload for INSN,
5608 and clear out reload R. */
5610 failed_reload (rtx insn, int r)
5612 if (asm_noperands (PATTERN (insn)) < 0)
5613 /* It's the compiler's fault. */
5614 fatal_insn ("could not find a spill register", insn);
5616 /* It's the user's fault; the operand's mode and constraint
5617 don't match. Disable this reload so we don't crash in final. */
5618 error_for_asm (insn,
5619 "%<asm%> operand constraint incompatible with operand size");
5623 rld[r].optional = 1;
5624 rld[r].secondary_p = 1;
5627 /* I is the index in SPILL_REG_RTX of the reload register we are to allocate
5628 for reload R. If it's valid, get an rtx for it. Return nonzero if
5631 set_reload_reg (int i, int r)
5634 rtx reg = spill_reg_rtx[i];
5636 if (reg == 0 || GET_MODE (reg) != rld[r].mode)
5637 spill_reg_rtx[i] = reg
5638 = gen_rtx_REG (rld[r].mode, spill_regs[i]);
5640 regno = true_regnum (reg);
5642 /* Detect when the reload reg can't hold the reload mode.
5643 This used to be one `if', but Sequent compiler can't handle that. */
5644 if (HARD_REGNO_MODE_OK (regno, rld[r].mode))
5646 enum machine_mode test_mode = VOIDmode;
5648 test_mode = GET_MODE (rld[r].in);
5649 /* If rld[r].in has VOIDmode, it means we will load it
5650 in whatever mode the reload reg has: to wit, rld[r].mode.
5651 We have already tested that for validity. */
5652 /* Aside from that, we need to test that the expressions
5653 to reload from or into have modes which are valid for this
5654 reload register. Otherwise the reload insns would be invalid. */
5655 if (! (rld[r].in != 0 && test_mode != VOIDmode
5656 && ! HARD_REGNO_MODE_OK (regno, test_mode)))
5657 if (! (rld[r].out != 0
5658 && ! HARD_REGNO_MODE_OK (regno, GET_MODE (rld[r].out))))
5660 /* The reg is OK. */
5663 /* Mark as in use for this insn the reload regs we use
5665 mark_reload_reg_in_use (spill_regs[i], rld[r].opnum,
5666 rld[r].when_needed, rld[r].mode);
5668 rld[r].reg_rtx = reg;
5669 reload_spill_index[r] = spill_regs[i];
5676 /* Find a spill register to use as a reload register for reload R.
5677 LAST_RELOAD is nonzero if this is the last reload for the insn being
5680 Set rld[R].reg_rtx to the register allocated.
5682 We return 1 if successful, or 0 if we couldn't find a spill reg and
5683 we didn't change anything. */
5686 allocate_reload_reg (struct insn_chain *chain ATTRIBUTE_UNUSED, int r,
5691 /* If we put this reload ahead, thinking it is a group,
5692 then insist on finding a group. Otherwise we can grab a
5693 reg that some other reload needs.
5694 (That can happen when we have a 68000 DATA_OR_FP_REG
5695 which is a group of data regs or one fp reg.)
5696 We need not be so restrictive if there are no more reloads
5699 ??? Really it would be nicer to have smarter handling
5700 for that kind of reg class, where a problem like this is normal.
5701 Perhaps those classes should be avoided for reloading
5702 by use of more alternatives. */
5704 int force_group = rld[r].nregs > 1 && ! last_reload;
5706 /* If we want a single register and haven't yet found one,
5707 take any reg in the right class and not in use.
5708 If we want a consecutive group, here is where we look for it.
5710 We use two passes so we can first look for reload regs to
5711 reuse, which are already in use for other reloads in this insn,
5712 and only then use additional registers.
5713 I think that maximizing reuse is needed to make sure we don't
5714 run out of reload regs. Suppose we have three reloads, and
5715 reloads A and B can share regs. These need two regs.
5716 Suppose A and B are given different regs.
5717 That leaves none for C. */
5718 for (pass = 0; pass < 2; pass++)
5720 /* I is the index in spill_regs.
5721 We advance it round-robin between insns to use all spill regs
5722 equally, so that inherited reloads have a chance
5723 of leapfrogging each other. */
5727 for (count = 0; count < n_spills; count++)
5729 int rclass = (int) rld[r].rclass;
5735 regnum = spill_regs[i];
5737 if ((reload_reg_free_p (regnum, rld[r].opnum,
5740 /* We check reload_reg_used to make sure we
5741 don't clobber the return register. */
5742 && ! TEST_HARD_REG_BIT (reload_reg_used, regnum)
5743 && free_for_value_p (regnum, rld[r].mode, rld[r].opnum,
5744 rld[r].when_needed, rld[r].in,
5746 && TEST_HARD_REG_BIT (reg_class_contents[rclass], regnum)
5747 && HARD_REGNO_MODE_OK (regnum, rld[r].mode)
5748 /* Look first for regs to share, then for unshared. But
5749 don't share regs used for inherited reloads; they are
5750 the ones we want to preserve. */
5752 || (TEST_HARD_REG_BIT (reload_reg_used_at_all,
5754 && ! TEST_HARD_REG_BIT (reload_reg_used_for_inherit,
5757 int nr = hard_regno_nregs[regnum][rld[r].mode];
5758 /* Avoid the problem where spilling a GENERAL_OR_FP_REG
5759 (on 68000) got us two FP regs. If NR is 1,
5760 we would reject both of them. */
5763 /* If we need only one reg, we have already won. */
5766 /* But reject a single reg if we demand a group. */
5771 /* Otherwise check that as many consecutive regs as we need
5772 are available here. */
5775 int regno = regnum + nr - 1;
5776 if (!(TEST_HARD_REG_BIT (reg_class_contents[rclass], regno)
5777 && spill_reg_order[regno] >= 0
5778 && reload_reg_free_p (regno, rld[r].opnum,
5779 rld[r].when_needed)))
5788 /* If we found something on pass 1, omit pass 2. */
5789 if (count < n_spills)
5793 /* We should have found a spill register by now. */
5794 if (count >= n_spills)
5797 /* I is the index in SPILL_REG_RTX of the reload register we are to
5798 allocate. Get an rtx for it and find its register number. */
5800 return set_reload_reg (i, r);
5803 /* Initialize all the tables needed to allocate reload registers.
5804 CHAIN is the insn currently being processed; SAVE_RELOAD_REG_RTX
5805 is the array we use to restore the reg_rtx field for every reload. */
5808 choose_reload_regs_init (struct insn_chain *chain, rtx *save_reload_reg_rtx)
5812 for (i = 0; i < n_reloads; i++)
5813 rld[i].reg_rtx = save_reload_reg_rtx[i];
5815 memset (reload_inherited, 0, MAX_RELOADS);
5816 memset (reload_inheritance_insn, 0, MAX_RELOADS * sizeof (rtx));
5817 memset (reload_override_in, 0, MAX_RELOADS * sizeof (rtx));
5819 CLEAR_HARD_REG_SET (reload_reg_used);
5820 CLEAR_HARD_REG_SET (reload_reg_used_at_all);
5821 CLEAR_HARD_REG_SET (reload_reg_used_in_op_addr);
5822 CLEAR_HARD_REG_SET (reload_reg_used_in_op_addr_reload);
5823 CLEAR_HARD_REG_SET (reload_reg_used_in_insn);
5824 CLEAR_HARD_REG_SET (reload_reg_used_in_other_addr);
5826 CLEAR_HARD_REG_SET (reg_used_in_insn);
5829 REG_SET_TO_HARD_REG_SET (tmp, &chain->live_throughout);
5830 IOR_HARD_REG_SET (reg_used_in_insn, tmp);
5831 REG_SET_TO_HARD_REG_SET (tmp, &chain->dead_or_set);
5832 IOR_HARD_REG_SET (reg_used_in_insn, tmp);
5833 compute_use_by_pseudos (®_used_in_insn, &chain->live_throughout);
5834 compute_use_by_pseudos (®_used_in_insn, &chain->dead_or_set);
5837 for (i = 0; i < reload_n_operands; i++)
5839 CLEAR_HARD_REG_SET (reload_reg_used_in_output[i]);
5840 CLEAR_HARD_REG_SET (reload_reg_used_in_input[i]);
5841 CLEAR_HARD_REG_SET (reload_reg_used_in_input_addr[i]);
5842 CLEAR_HARD_REG_SET (reload_reg_used_in_inpaddr_addr[i]);
5843 CLEAR_HARD_REG_SET (reload_reg_used_in_output_addr[i]);
5844 CLEAR_HARD_REG_SET (reload_reg_used_in_outaddr_addr[i]);
5847 COMPL_HARD_REG_SET (reload_reg_unavailable, chain->used_spill_regs);
5849 CLEAR_HARD_REG_SET (reload_reg_used_for_inherit);
5851 for (i = 0; i < n_reloads; i++)
5852 /* If we have already decided to use a certain register,
5853 don't use it in another way. */
5855 mark_reload_reg_in_use (REGNO (rld[i].reg_rtx), rld[i].opnum,
5856 rld[i].when_needed, rld[i].mode);
5859 /* Assign hard reg targets for the pseudo-registers we must reload
5860 into hard regs for this insn.
5861 Also output the instructions to copy them in and out of the hard regs.
5863 For machines with register classes, we are responsible for
5864 finding a reload reg in the proper class. */
5867 choose_reload_regs (struct insn_chain *chain)
5869 rtx insn = chain->insn;
5871 unsigned int max_group_size = 1;
5872 enum reg_class group_class = NO_REGS;
5873 int pass, win, inheritance;
5875 rtx save_reload_reg_rtx[MAX_RELOADS];
5877 /* In order to be certain of getting the registers we need,
5878 we must sort the reloads into order of increasing register class.
5879 Then our grabbing of reload registers will parallel the process
5880 that provided the reload registers.
5882 Also note whether any of the reloads wants a consecutive group of regs.
5883 If so, record the maximum size of the group desired and what
5884 register class contains all the groups needed by this insn. */
5886 for (j = 0; j < n_reloads; j++)
5888 reload_order[j] = j;
5889 if (rld[j].reg_rtx != NULL_RTX)
5891 gcc_assert (REG_P (rld[j].reg_rtx)
5892 && HARD_REGISTER_P (rld[j].reg_rtx));
5893 reload_spill_index[j] = REGNO (rld[j].reg_rtx);
5896 reload_spill_index[j] = -1;
5898 if (rld[j].nregs > 1)
5900 max_group_size = MAX (rld[j].nregs, max_group_size);
5902 = reg_class_superunion[(int) rld[j].rclass][(int) group_class];
5905 save_reload_reg_rtx[j] = rld[j].reg_rtx;
5909 qsort (reload_order, n_reloads, sizeof (short), reload_reg_class_lower);
5911 /* If -O, try first with inheritance, then turning it off.
5912 If not -O, don't do inheritance.
5913 Using inheritance when not optimizing leads to paradoxes
5914 with fp on the 68k: fp numbers (not NaNs) fail to be equal to themselves
5915 because one side of the comparison might be inherited. */
5917 for (inheritance = optimize > 0; inheritance >= 0; inheritance--)
5919 choose_reload_regs_init (chain, save_reload_reg_rtx);
5921 /* Process the reloads in order of preference just found.
5922 Beyond this point, subregs can be found in reload_reg_rtx.
5924 This used to look for an existing reloaded home for all of the
5925 reloads, and only then perform any new reloads. But that could lose
5926 if the reloads were done out of reg-class order because a later
5927 reload with a looser constraint might have an old home in a register
5928 needed by an earlier reload with a tighter constraint.
5930 To solve this, we make two passes over the reloads, in the order
5931 described above. In the first pass we try to inherit a reload
5932 from a previous insn. If there is a later reload that needs a
5933 class that is a proper subset of the class being processed, we must
5934 also allocate a spill register during the first pass.
5936 Then make a second pass over the reloads to allocate any reloads
5937 that haven't been given registers yet. */
5939 for (j = 0; j < n_reloads; j++)
5941 int r = reload_order[j];
5942 rtx search_equiv = NULL_RTX;
5944 /* Ignore reloads that got marked inoperative. */
5945 if (rld[r].out == 0 && rld[r].in == 0
5946 && ! rld[r].secondary_p)
5949 /* If find_reloads chose to use reload_in or reload_out as a reload
5950 register, we don't need to chose one. Otherwise, try even if it
5951 found one since we might save an insn if we find the value lying
5953 Try also when reload_in is a pseudo without a hard reg. */
5954 if (rld[r].in != 0 && rld[r].reg_rtx != 0
5955 && (rtx_equal_p (rld[r].in, rld[r].reg_rtx)
5956 || (rtx_equal_p (rld[r].out, rld[r].reg_rtx)
5957 && !MEM_P (rld[r].in)
5958 && true_regnum (rld[r].in) < FIRST_PSEUDO_REGISTER)))
5961 #if 0 /* No longer needed for correct operation.
5962 It might give better code, or might not; worth an experiment? */
5963 /* If this is an optional reload, we can't inherit from earlier insns
5964 until we are sure that any non-optional reloads have been allocated.
5965 The following code takes advantage of the fact that optional reloads
5966 are at the end of reload_order. */
5967 if (rld[r].optional != 0)
5968 for (i = 0; i < j; i++)
5969 if ((rld[reload_order[i]].out != 0
5970 || rld[reload_order[i]].in != 0
5971 || rld[reload_order[i]].secondary_p)
5972 && ! rld[reload_order[i]].optional
5973 && rld[reload_order[i]].reg_rtx == 0)
5974 allocate_reload_reg (chain, reload_order[i], 0);
5977 /* First see if this pseudo is already available as reloaded
5978 for a previous insn. We cannot try to inherit for reloads
5979 that are smaller than the maximum number of registers needed
5980 for groups unless the register we would allocate cannot be used
5983 We could check here to see if this is a secondary reload for
5984 an object that is already in a register of the desired class.
5985 This would avoid the need for the secondary reload register.
5986 But this is complex because we can't easily determine what
5987 objects might want to be loaded via this reload. So let a
5988 register be allocated here. In `emit_reload_insns' we suppress
5989 one of the loads in the case described above. */
5995 enum machine_mode mode = VOIDmode;
5999 else if (REG_P (rld[r].in))
6001 regno = REGNO (rld[r].in);
6002 mode = GET_MODE (rld[r].in);
6004 else if (REG_P (rld[r].in_reg))
6006 regno = REGNO (rld[r].in_reg);
6007 mode = GET_MODE (rld[r].in_reg);
6009 else if (GET_CODE (rld[r].in_reg) == SUBREG
6010 && REG_P (SUBREG_REG (rld[r].in_reg)))
6012 regno = REGNO (SUBREG_REG (rld[r].in_reg));
6013 if (regno < FIRST_PSEUDO_REGISTER)
6014 regno = subreg_regno (rld[r].in_reg);
6016 byte = SUBREG_BYTE (rld[r].in_reg);
6017 mode = GET_MODE (rld[r].in_reg);
6020 else if (GET_RTX_CLASS (GET_CODE (rld[r].in_reg)) == RTX_AUTOINC
6021 && REG_P (XEXP (rld[r].in_reg, 0)))
6023 regno = REGNO (XEXP (rld[r].in_reg, 0));
6024 mode = GET_MODE (XEXP (rld[r].in_reg, 0));
6025 rld[r].out = rld[r].in;
6029 /* This won't work, since REGNO can be a pseudo reg number.
6030 Also, it takes much more hair to keep track of all the things
6031 that can invalidate an inherited reload of part of a pseudoreg. */
6032 else if (GET_CODE (rld[r].in) == SUBREG
6033 && REG_P (SUBREG_REG (rld[r].in)))
6034 regno = subreg_regno (rld[r].in);
6038 && reg_last_reload_reg[regno] != 0
6039 #ifdef CANNOT_CHANGE_MODE_CLASS
6040 /* Verify that the register it's in can be used in
6042 && !REG_CANNOT_CHANGE_MODE_P (REGNO (reg_last_reload_reg[regno]),
6043 GET_MODE (reg_last_reload_reg[regno]),
6048 enum reg_class rclass = rld[r].rclass, last_class;
6049 rtx last_reg = reg_last_reload_reg[regno];
6050 enum machine_mode need_mode;
6052 i = REGNO (last_reg);
6053 i += subreg_regno_offset (i, GET_MODE (last_reg), byte, mode);
6054 last_class = REGNO_REG_CLASS (i);
6060 = smallest_mode_for_size
6061 (GET_MODE_BITSIZE (mode) + byte * BITS_PER_UNIT,
6062 GET_MODE_CLASS (mode) == MODE_PARTIAL_INT
6063 ? MODE_INT : GET_MODE_CLASS (mode));
6065 if ((GET_MODE_SIZE (GET_MODE (last_reg))
6066 >= GET_MODE_SIZE (need_mode))
6067 && reg_reloaded_contents[i] == regno
6068 && TEST_HARD_REG_BIT (reg_reloaded_valid, i)
6069 && HARD_REGNO_MODE_OK (i, rld[r].mode)
6070 && (TEST_HARD_REG_BIT (reg_class_contents[(int) rclass], i)
6071 /* Even if we can't use this register as a reload
6072 register, we might use it for reload_override_in,
6073 if copying it to the desired class is cheap
6075 || ((REGISTER_MOVE_COST (mode, last_class, rclass)
6076 < MEMORY_MOVE_COST (mode, rclass, 1))
6077 && (secondary_reload_class (1, rclass, mode,
6080 #ifdef SECONDARY_MEMORY_NEEDED
6081 && ! SECONDARY_MEMORY_NEEDED (last_class, rclass,
6086 && (rld[r].nregs == max_group_size
6087 || ! TEST_HARD_REG_BIT (reg_class_contents[(int) group_class],
6089 && free_for_value_p (i, rld[r].mode, rld[r].opnum,
6090 rld[r].when_needed, rld[r].in,
6093 /* If a group is needed, verify that all the subsequent
6094 registers still have their values intact. */
6095 int nr = hard_regno_nregs[i][rld[r].mode];
6098 for (k = 1; k < nr; k++)
6099 if (reg_reloaded_contents[i + k] != regno
6100 || ! TEST_HARD_REG_BIT (reg_reloaded_valid, i + k))
6108 last_reg = (GET_MODE (last_reg) == mode
6109 ? last_reg : gen_rtx_REG (mode, i));
6112 for (k = 0; k < nr; k++)
6113 bad_for_class |= ! TEST_HARD_REG_BIT (reg_class_contents[(int) rld[r].rclass],
6116 /* We found a register that contains the
6117 value we need. If this register is the
6118 same as an `earlyclobber' operand of the
6119 current insn, just mark it as a place to
6120 reload from since we can't use it as the
6121 reload register itself. */
6123 for (i1 = 0; i1 < n_earlyclobbers; i1++)
6124 if (reg_overlap_mentioned_for_reload_p
6125 (reg_last_reload_reg[regno],
6126 reload_earlyclobbers[i1]))
6129 if (i1 != n_earlyclobbers
6130 || ! (free_for_value_p (i, rld[r].mode,
6132 rld[r].when_needed, rld[r].in,
6134 /* Don't use it if we'd clobber a pseudo reg. */
6135 || (TEST_HARD_REG_BIT (reg_used_in_insn, i)
6137 && ! TEST_HARD_REG_BIT (reg_reloaded_dead, i))
6138 /* Don't clobber the frame pointer. */
6139 || (i == HARD_FRAME_POINTER_REGNUM
6140 && frame_pointer_needed
6142 /* Don't really use the inherited spill reg
6143 if we need it wider than we've got it. */
6144 || (GET_MODE_SIZE (rld[r].mode)
6145 > GET_MODE_SIZE (mode))
6148 /* If find_reloads chose reload_out as reload
6149 register, stay with it - that leaves the
6150 inherited register for subsequent reloads. */
6151 || (rld[r].out && rld[r].reg_rtx
6152 && rtx_equal_p (rld[r].out, rld[r].reg_rtx)))
6154 if (! rld[r].optional)
6156 reload_override_in[r] = last_reg;
6157 reload_inheritance_insn[r]
6158 = reg_reloaded_insn[i];
6164 /* We can use this as a reload reg. */
6165 /* Mark the register as in use for this part of
6167 mark_reload_reg_in_use (i,
6171 rld[r].reg_rtx = last_reg;
6172 reload_inherited[r] = 1;
6173 reload_inheritance_insn[r]
6174 = reg_reloaded_insn[i];
6175 reload_spill_index[r] = i;
6176 for (k = 0; k < nr; k++)
6177 SET_HARD_REG_BIT (reload_reg_used_for_inherit,
6185 /* Here's another way to see if the value is already lying around. */
6188 && ! reload_inherited[r]
6190 && (CONSTANT_P (rld[r].in)
6191 || GET_CODE (rld[r].in) == PLUS
6192 || REG_P (rld[r].in)
6193 || MEM_P (rld[r].in))
6194 && (rld[r].nregs == max_group_size
6195 || ! reg_classes_intersect_p (rld[r].rclass, group_class)))
6196 search_equiv = rld[r].in;
6197 /* If this is an output reload from a simple move insn, look
6198 if an equivalence for the input is available. */
6199 else if (inheritance && rld[r].in == 0 && rld[r].out != 0)
6201 rtx set = single_set (insn);
6204 && rtx_equal_p (rld[r].out, SET_DEST (set))
6205 && CONSTANT_P (SET_SRC (set)))
6206 search_equiv = SET_SRC (set);
6212 = find_equiv_reg (search_equiv, insn, rld[r].rclass,
6213 -1, NULL, 0, rld[r].mode);
6219 regno = REGNO (equiv);
6222 /* This must be a SUBREG of a hard register.
6223 Make a new REG since this might be used in an
6224 address and not all machines support SUBREGs
6226 gcc_assert (GET_CODE (equiv) == SUBREG);
6227 regno = subreg_regno (equiv);
6228 equiv = gen_rtx_REG (rld[r].mode, regno);
6229 /* If we choose EQUIV as the reload register, but the
6230 loop below decides to cancel the inheritance, we'll
6231 end up reloading EQUIV in rld[r].mode, not the mode
6232 it had originally. That isn't safe when EQUIV isn't
6233 available as a spill register since its value might
6234 still be live at this point. */
6235 for (i = regno; i < regno + (int) rld[r].nregs; i++)
6236 if (TEST_HARD_REG_BIT (reload_reg_unavailable, i))
6241 /* If we found a spill reg, reject it unless it is free
6242 and of the desired class. */
6246 int bad_for_class = 0;
6247 int max_regno = regno + rld[r].nregs;
6249 for (i = regno; i < max_regno; i++)
6251 regs_used |= TEST_HARD_REG_BIT (reload_reg_used_at_all,
6253 bad_for_class |= ! TEST_HARD_REG_BIT (reg_class_contents[(int) rld[r].rclass],
6258 && ! free_for_value_p (regno, rld[r].mode,
6259 rld[r].opnum, rld[r].when_needed,
6260 rld[r].in, rld[r].out, r, 1))
6265 if (equiv != 0 && ! HARD_REGNO_MODE_OK (regno, rld[r].mode))
6268 /* We found a register that contains the value we need.
6269 If this register is the same as an `earlyclobber' operand
6270 of the current insn, just mark it as a place to reload from
6271 since we can't use it as the reload register itself. */
6274 for (i = 0; i < n_earlyclobbers; i++)
6275 if (reg_overlap_mentioned_for_reload_p (equiv,
6276 reload_earlyclobbers[i]))
6278 if (! rld[r].optional)
6279 reload_override_in[r] = equiv;
6284 /* If the equiv register we have found is explicitly clobbered
6285 in the current insn, it depends on the reload type if we
6286 can use it, use it for reload_override_in, or not at all.
6287 In particular, we then can't use EQUIV for a
6288 RELOAD_FOR_OUTPUT_ADDRESS reload. */
6292 if (regno_clobbered_p (regno, insn, rld[r].mode, 2))
6293 switch (rld[r].when_needed)
6295 case RELOAD_FOR_OTHER_ADDRESS:
6296 case RELOAD_FOR_INPADDR_ADDRESS:
6297 case RELOAD_FOR_INPUT_ADDRESS:
6298 case RELOAD_FOR_OPADDR_ADDR:
6301 case RELOAD_FOR_INPUT:
6302 case RELOAD_FOR_OPERAND_ADDRESS:
6303 if (! rld[r].optional)
6304 reload_override_in[r] = equiv;
6310 else if (regno_clobbered_p (regno, insn, rld[r].mode, 1))
6311 switch (rld[r].when_needed)
6313 case RELOAD_FOR_OTHER_ADDRESS:
6314 case RELOAD_FOR_INPADDR_ADDRESS:
6315 case RELOAD_FOR_INPUT_ADDRESS:
6316 case RELOAD_FOR_OPADDR_ADDR:
6317 case RELOAD_FOR_OPERAND_ADDRESS:
6318 case RELOAD_FOR_INPUT:
6321 if (! rld[r].optional)
6322 reload_override_in[r] = equiv;
6330 /* If we found an equivalent reg, say no code need be generated
6331 to load it, and use it as our reload reg. */
6333 && (regno != HARD_FRAME_POINTER_REGNUM
6334 || !frame_pointer_needed))
6336 int nr = hard_regno_nregs[regno][rld[r].mode];
6338 rld[r].reg_rtx = equiv;
6339 reload_spill_index[r] = regno;
6340 reload_inherited[r] = 1;
6342 /* If reg_reloaded_valid is not set for this register,
6343 there might be a stale spill_reg_store lying around.
6344 We must clear it, since otherwise emit_reload_insns
6345 might delete the store. */
6346 if (! TEST_HARD_REG_BIT (reg_reloaded_valid, regno))
6347 spill_reg_store[regno] = NULL_RTX;
6348 /* If any of the hard registers in EQUIV are spill
6349 registers, mark them as in use for this insn. */
6350 for (k = 0; k < nr; k++)
6352 i = spill_reg_order[regno + k];
6355 mark_reload_reg_in_use (regno, rld[r].opnum,
6358 SET_HARD_REG_BIT (reload_reg_used_for_inherit,
6365 /* If we found a register to use already, or if this is an optional
6366 reload, we are done. */
6367 if (rld[r].reg_rtx != 0 || rld[r].optional != 0)
6371 /* No longer needed for correct operation. Might or might
6372 not give better code on the average. Want to experiment? */
6374 /* See if there is a later reload that has a class different from our
6375 class that intersects our class or that requires less register
6376 than our reload. If so, we must allocate a register to this
6377 reload now, since that reload might inherit a previous reload
6378 and take the only available register in our class. Don't do this
6379 for optional reloads since they will force all previous reloads
6380 to be allocated. Also don't do this for reloads that have been
6383 for (i = j + 1; i < n_reloads; i++)
6385 int s = reload_order[i];
6387 if ((rld[s].in == 0 && rld[s].out == 0
6388 && ! rld[s].secondary_p)
6392 if ((rld[s].rclass != rld[r].rclass
6393 && reg_classes_intersect_p (rld[r].rclass,
6395 || rld[s].nregs < rld[r].nregs)
6402 allocate_reload_reg (chain, r, j == n_reloads - 1);
6406 /* Now allocate reload registers for anything non-optional that
6407 didn't get one yet. */
6408 for (j = 0; j < n_reloads; j++)
6410 int r = reload_order[j];
6412 /* Ignore reloads that got marked inoperative. */
6413 if (rld[r].out == 0 && rld[r].in == 0 && ! rld[r].secondary_p)
6416 /* Skip reloads that already have a register allocated or are
6418 if (rld[r].reg_rtx != 0 || rld[r].optional)
6421 if (! allocate_reload_reg (chain, r, j == n_reloads - 1))
6425 /* If that loop got all the way, we have won. */
6432 /* Loop around and try without any inheritance. */
6437 /* First undo everything done by the failed attempt
6438 to allocate with inheritance. */
6439 choose_reload_regs_init (chain, save_reload_reg_rtx);
6441 /* Some sanity tests to verify that the reloads found in the first
6442 pass are identical to the ones we have now. */
6443 gcc_assert (chain->n_reloads == n_reloads);
6445 for (i = 0; i < n_reloads; i++)
6447 if (chain->rld[i].regno < 0 || chain->rld[i].reg_rtx != 0)
6449 gcc_assert (chain->rld[i].when_needed == rld[i].when_needed);
6450 for (j = 0; j < n_spills; j++)
6451 if (spill_regs[j] == chain->rld[i].regno)
6452 if (! set_reload_reg (j, i))
6453 failed_reload (chain->insn, i);
6457 /* If we thought we could inherit a reload, because it seemed that
6458 nothing else wanted the same reload register earlier in the insn,
6459 verify that assumption, now that all reloads have been assigned.
6460 Likewise for reloads where reload_override_in has been set. */
6462 /* If doing expensive optimizations, do one preliminary pass that doesn't
6463 cancel any inheritance, but removes reloads that have been needed only
6464 for reloads that we know can be inherited. */
6465 for (pass = flag_expensive_optimizations; pass >= 0; pass--)
6467 for (j = 0; j < n_reloads; j++)
6469 int r = reload_order[j];
6471 if (reload_inherited[r] && rld[r].reg_rtx)
6472 check_reg = rld[r].reg_rtx;
6473 else if (reload_override_in[r]
6474 && (REG_P (reload_override_in[r])
6475 || GET_CODE (reload_override_in[r]) == SUBREG))
6476 check_reg = reload_override_in[r];
6479 if (! free_for_value_p (true_regnum (check_reg), rld[r].mode,
6480 rld[r].opnum, rld[r].when_needed, rld[r].in,
6481 (reload_inherited[r]
6482 ? rld[r].out : const0_rtx),
6487 reload_inherited[r] = 0;
6488 reload_override_in[r] = 0;
6490 /* If we can inherit a RELOAD_FOR_INPUT, or can use a
6491 reload_override_in, then we do not need its related
6492 RELOAD_FOR_INPUT_ADDRESS / RELOAD_FOR_INPADDR_ADDRESS reloads;
6493 likewise for other reload types.
6494 We handle this by removing a reload when its only replacement
6495 is mentioned in reload_in of the reload we are going to inherit.
6496 A special case are auto_inc expressions; even if the input is
6497 inherited, we still need the address for the output. We can
6498 recognize them because they have RELOAD_OUT set to RELOAD_IN.
6499 If we succeeded removing some reload and we are doing a preliminary
6500 pass just to remove such reloads, make another pass, since the
6501 removal of one reload might allow us to inherit another one. */
6503 && rld[r].out != rld[r].in
6504 && remove_address_replacements (rld[r].in) && pass)
6509 /* Now that reload_override_in is known valid,
6510 actually override reload_in. */
6511 for (j = 0; j < n_reloads; j++)
6512 if (reload_override_in[j])
6513 rld[j].in = reload_override_in[j];
6515 /* If this reload won't be done because it has been canceled or is
6516 optional and not inherited, clear reload_reg_rtx so other
6517 routines (such as subst_reloads) don't get confused. */
6518 for (j = 0; j < n_reloads; j++)
6519 if (rld[j].reg_rtx != 0
6520 && ((rld[j].optional && ! reload_inherited[j])
6521 || (rld[j].in == 0 && rld[j].out == 0
6522 && ! rld[j].secondary_p)))
6524 int regno = true_regnum (rld[j].reg_rtx);
6526 if (spill_reg_order[regno] >= 0)
6527 clear_reload_reg_in_use (regno, rld[j].opnum,
6528 rld[j].when_needed, rld[j].mode);
6530 reload_spill_index[j] = -1;
6533 /* Record which pseudos and which spill regs have output reloads. */
6534 for (j = 0; j < n_reloads; j++)
6536 int r = reload_order[j];
6538 i = reload_spill_index[r];
6540 /* I is nonneg if this reload uses a register.
6541 If rld[r].reg_rtx is 0, this is an optional reload
6542 that we opted to ignore. */
6543 if (rld[r].out_reg != 0 && REG_P (rld[r].out_reg)
6544 && rld[r].reg_rtx != 0)
6546 int nregno = REGNO (rld[r].out_reg);
6549 if (nregno < FIRST_PSEUDO_REGISTER)
6550 nr = hard_regno_nregs[nregno][rld[r].mode];
6553 SET_REGNO_REG_SET (®_has_output_reload,
6558 nr = hard_regno_nregs[i][rld[r].mode];
6560 SET_HARD_REG_BIT (reg_is_output_reload, i + nr);
6563 gcc_assert (rld[r].when_needed == RELOAD_OTHER
6564 || rld[r].when_needed == RELOAD_FOR_OUTPUT
6565 || rld[r].when_needed == RELOAD_FOR_INSN);
6570 /* Deallocate the reload register for reload R. This is called from
6571 remove_address_replacements. */
6574 deallocate_reload_reg (int r)
6578 if (! rld[r].reg_rtx)
6580 regno = true_regnum (rld[r].reg_rtx);
6582 if (spill_reg_order[regno] >= 0)
6583 clear_reload_reg_in_use (regno, rld[r].opnum, rld[r].when_needed,
6585 reload_spill_index[r] = -1;
6588 /* If SMALL_REGISTER_CLASSES is nonzero, we may not have merged two
6589 reloads of the same item for fear that we might not have enough reload
6590 registers. However, normally they will get the same reload register
6591 and hence actually need not be loaded twice.
6593 Here we check for the most common case of this phenomenon: when we have
6594 a number of reloads for the same object, each of which were allocated
6595 the same reload_reg_rtx, that reload_reg_rtx is not used for any other
6596 reload, and is not modified in the insn itself. If we find such,
6597 merge all the reloads and set the resulting reload to RELOAD_OTHER.
6598 This will not increase the number of spill registers needed and will
6599 prevent redundant code. */
6602 merge_assigned_reloads (rtx insn)
6606 /* Scan all the reloads looking for ones that only load values and
6607 are not already RELOAD_OTHER and ones whose reload_reg_rtx are
6608 assigned and not modified by INSN. */
6610 for (i = 0; i < n_reloads; i++)
6612 int conflicting_input = 0;
6613 int max_input_address_opnum = -1;
6614 int min_conflicting_input_opnum = MAX_RECOG_OPERANDS;
6616 if (rld[i].in == 0 || rld[i].when_needed == RELOAD_OTHER
6617 || rld[i].out != 0 || rld[i].reg_rtx == 0
6618 || reg_set_p (rld[i].reg_rtx, insn))
6621 /* Look at all other reloads. Ensure that the only use of this
6622 reload_reg_rtx is in a reload that just loads the same value
6623 as we do. Note that any secondary reloads must be of the identical
6624 class since the values, modes, and result registers are the
6625 same, so we need not do anything with any secondary reloads. */
6627 for (j = 0; j < n_reloads; j++)
6629 if (i == j || rld[j].reg_rtx == 0
6630 || ! reg_overlap_mentioned_p (rld[j].reg_rtx,
6634 if (rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
6635 && rld[j].opnum > max_input_address_opnum)
6636 max_input_address_opnum = rld[j].opnum;
6638 /* If the reload regs aren't exactly the same (e.g, different modes)
6639 or if the values are different, we can't merge this reload.
6640 But if it is an input reload, we might still merge
6641 RELOAD_FOR_INPUT_ADDRESS and RELOAD_FOR_OTHER_ADDRESS reloads. */
6643 if (! rtx_equal_p (rld[i].reg_rtx, rld[j].reg_rtx)
6644 || rld[j].out != 0 || rld[j].in == 0
6645 || ! rtx_equal_p (rld[i].in, rld[j].in))
6647 if (rld[j].when_needed != RELOAD_FOR_INPUT
6648 || ((rld[i].when_needed != RELOAD_FOR_INPUT_ADDRESS
6649 || rld[i].opnum > rld[j].opnum)
6650 && rld[i].when_needed != RELOAD_FOR_OTHER_ADDRESS))
6652 conflicting_input = 1;
6653 if (min_conflicting_input_opnum > rld[j].opnum)
6654 min_conflicting_input_opnum = rld[j].opnum;
6658 /* If all is OK, merge the reloads. Only set this to RELOAD_OTHER if
6659 we, in fact, found any matching reloads. */
6662 && max_input_address_opnum <= min_conflicting_input_opnum)
6664 gcc_assert (rld[i].when_needed != RELOAD_FOR_OUTPUT);
6666 for (j = 0; j < n_reloads; j++)
6667 if (i != j && rld[j].reg_rtx != 0
6668 && rtx_equal_p (rld[i].reg_rtx, rld[j].reg_rtx)
6669 && (! conflicting_input
6670 || rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
6671 || rld[j].when_needed == RELOAD_FOR_OTHER_ADDRESS))
6673 rld[i].when_needed = RELOAD_OTHER;
6675 reload_spill_index[j] = -1;
6676 transfer_replacements (i, j);
6679 /* If this is now RELOAD_OTHER, look for any reloads that
6680 load parts of this operand and set them to
6681 RELOAD_FOR_OTHER_ADDRESS if they were for inputs,
6682 RELOAD_OTHER for outputs. Note that this test is
6683 equivalent to looking for reloads for this operand
6686 We must take special care with RELOAD_FOR_OUTPUT_ADDRESS;
6687 it may share registers with a RELOAD_FOR_INPUT, so we can
6688 not change it to RELOAD_FOR_OTHER_ADDRESS. We should
6689 never need to, since we do not modify RELOAD_FOR_OUTPUT.
6691 It is possible that the RELOAD_FOR_OPERAND_ADDRESS
6692 instruction is assigned the same register as the earlier
6693 RELOAD_FOR_OTHER_ADDRESS instruction. Merging these two
6694 instructions will cause the RELOAD_FOR_OTHER_ADDRESS
6695 instruction to be deleted later on. */
6697 if (rld[i].when_needed == RELOAD_OTHER)
6698 for (j = 0; j < n_reloads; j++)
6700 && rld[j].when_needed != RELOAD_OTHER
6701 && rld[j].when_needed != RELOAD_FOR_OTHER_ADDRESS
6702 && rld[j].when_needed != RELOAD_FOR_OUTPUT_ADDRESS
6703 && rld[j].when_needed != RELOAD_FOR_OPERAND_ADDRESS
6704 && (! conflicting_input
6705 || rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
6706 || rld[j].when_needed == RELOAD_FOR_INPADDR_ADDRESS)
6707 && reg_overlap_mentioned_for_reload_p (rld[j].in,
6713 = ((rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
6714 || rld[j].when_needed == RELOAD_FOR_INPADDR_ADDRESS)
6715 ? RELOAD_FOR_OTHER_ADDRESS : RELOAD_OTHER);
6717 /* Check to see if we accidentally converted two
6718 reloads that use the same reload register with
6719 different inputs to the same type. If so, the
6720 resulting code won't work. */
6722 for (k = 0; k < j; k++)
6723 gcc_assert (rld[k].in == 0 || rld[k].reg_rtx == 0
6724 || rld[k].when_needed != rld[j].when_needed
6725 || !rtx_equal_p (rld[k].reg_rtx,
6727 || rtx_equal_p (rld[k].in,
6734 /* These arrays are filled by emit_reload_insns and its subroutines. */
6735 static rtx input_reload_insns[MAX_RECOG_OPERANDS];
6736 static rtx other_input_address_reload_insns = 0;
6737 static rtx other_input_reload_insns = 0;
6738 static rtx input_address_reload_insns[MAX_RECOG_OPERANDS];
6739 static rtx inpaddr_address_reload_insns[MAX_RECOG_OPERANDS];
6740 static rtx output_reload_insns[MAX_RECOG_OPERANDS];
6741 static rtx output_address_reload_insns[MAX_RECOG_OPERANDS];
6742 static rtx outaddr_address_reload_insns[MAX_RECOG_OPERANDS];
6743 static rtx operand_reload_insns = 0;
6744 static rtx other_operand_reload_insns = 0;
6745 static rtx other_output_reload_insns[MAX_RECOG_OPERANDS];
6747 /* Values to be put in spill_reg_store are put here first. */
6748 static rtx new_spill_reg_store[FIRST_PSEUDO_REGISTER];
6749 static HARD_REG_SET reg_reloaded_died;
6751 /* Check if *RELOAD_REG is suitable as an intermediate or scratch register
6752 of class NEW_CLASS with mode NEW_MODE. Or alternatively, if alt_reload_reg
6753 is nonzero, if that is suitable. On success, change *RELOAD_REG to the
6754 adjusted register, and return true. Otherwise, return false. */
6756 reload_adjust_reg_for_temp (rtx *reload_reg, rtx alt_reload_reg,
6757 enum reg_class new_class,
6758 enum machine_mode new_mode)
6763 for (reg = *reload_reg; reg; reg = alt_reload_reg, alt_reload_reg = 0)
6765 unsigned regno = REGNO (reg);
6767 if (!TEST_HARD_REG_BIT (reg_class_contents[(int) new_class], regno))
6769 if (GET_MODE (reg) != new_mode)
6771 if (!HARD_REGNO_MODE_OK (regno, new_mode))
6773 if (hard_regno_nregs[regno][new_mode]
6774 > hard_regno_nregs[regno][GET_MODE (reg)])
6776 reg = reload_adjust_reg_for_mode (reg, new_mode);
6784 /* Check if *RELOAD_REG is suitable as a scratch register for the reload
6785 pattern with insn_code ICODE, or alternatively, if alt_reload_reg is
6786 nonzero, if that is suitable. On success, change *RELOAD_REG to the
6787 adjusted register, and return true. Otherwise, return false. */
6789 reload_adjust_reg_for_icode (rtx *reload_reg, rtx alt_reload_reg,
6790 enum insn_code icode)
6793 enum reg_class new_class = scratch_reload_class (icode);
6794 enum machine_mode new_mode = insn_data[(int) icode].operand[2].mode;
6796 return reload_adjust_reg_for_temp (reload_reg, alt_reload_reg,
6797 new_class, new_mode);
6800 /* Generate insns to perform reload RL, which is for the insn in CHAIN and
6801 has the number J. OLD contains the value to be used as input. */
6804 emit_input_reload_insns (struct insn_chain *chain, struct reload *rl,
6807 rtx insn = chain->insn;
6809 rtx oldequiv_reg = 0;
6812 enum machine_mode mode;
6815 /* delete_output_reload is only invoked properly if old contains
6816 the original pseudo register. Since this is replaced with a
6817 hard reg when RELOAD_OVERRIDE_IN is set, see if we can
6818 find the pseudo in RELOAD_IN_REG. */
6819 if (reload_override_in[j]
6820 && REG_P (rl->in_reg))
6827 else if (REG_P (oldequiv))
6828 oldequiv_reg = oldequiv;
6829 else if (GET_CODE (oldequiv) == SUBREG)
6830 oldequiv_reg = SUBREG_REG (oldequiv);
6832 reloadreg = reload_reg_rtx_for_input[j];
6833 mode = GET_MODE (reloadreg);
6835 /* If we are reloading from a register that was recently stored in
6836 with an output-reload, see if we can prove there was
6837 actually no need to store the old value in it. */
6839 if (optimize && REG_P (oldequiv)
6840 && REGNO (oldequiv) < FIRST_PSEUDO_REGISTER
6841 && spill_reg_store[REGNO (oldequiv)]
6843 && (dead_or_set_p (insn, spill_reg_stored_to[REGNO (oldequiv)])
6844 || rtx_equal_p (spill_reg_stored_to[REGNO (oldequiv)],
6846 delete_output_reload (insn, j, REGNO (oldequiv), reloadreg);
6848 /* Encapsulate OLDEQUIV into the reload mode, then load RELOADREG from
6851 while (GET_CODE (oldequiv) == SUBREG && GET_MODE (oldequiv) != mode)
6852 oldequiv = SUBREG_REG (oldequiv);
6853 if (GET_MODE (oldequiv) != VOIDmode
6854 && mode != GET_MODE (oldequiv))
6855 oldequiv = gen_lowpart_SUBREG (mode, oldequiv);
6857 /* Switch to the right place to emit the reload insns. */
6858 switch (rl->when_needed)
6861 where = &other_input_reload_insns;
6863 case RELOAD_FOR_INPUT:
6864 where = &input_reload_insns[rl->opnum];
6866 case RELOAD_FOR_INPUT_ADDRESS:
6867 where = &input_address_reload_insns[rl->opnum];
6869 case RELOAD_FOR_INPADDR_ADDRESS:
6870 where = &inpaddr_address_reload_insns[rl->opnum];
6872 case RELOAD_FOR_OUTPUT_ADDRESS:
6873 where = &output_address_reload_insns[rl->opnum];
6875 case RELOAD_FOR_OUTADDR_ADDRESS:
6876 where = &outaddr_address_reload_insns[rl->opnum];
6878 case RELOAD_FOR_OPERAND_ADDRESS:
6879 where = &operand_reload_insns;
6881 case RELOAD_FOR_OPADDR_ADDR:
6882 where = &other_operand_reload_insns;
6884 case RELOAD_FOR_OTHER_ADDRESS:
6885 where = &other_input_address_reload_insns;
6891 push_to_sequence (*where);
6893 /* Auto-increment addresses must be reloaded in a special way. */
6894 if (rl->out && ! rl->out_reg)
6896 /* We are not going to bother supporting the case where a
6897 incremented register can't be copied directly from
6898 OLDEQUIV since this seems highly unlikely. */
6899 gcc_assert (rl->secondary_in_reload < 0);
6901 if (reload_inherited[j])
6902 oldequiv = reloadreg;
6904 old = XEXP (rl->in_reg, 0);
6906 if (optimize && REG_P (oldequiv)
6907 && REGNO (oldequiv) < FIRST_PSEUDO_REGISTER
6908 && spill_reg_store[REGNO (oldequiv)]
6910 && (dead_or_set_p (insn,
6911 spill_reg_stored_to[REGNO (oldequiv)])
6912 || rtx_equal_p (spill_reg_stored_to[REGNO (oldequiv)],
6914 delete_output_reload (insn, j, REGNO (oldequiv), reloadreg);
6916 /* Prevent normal processing of this reload. */
6918 /* Output a special code sequence for this case. */
6919 new_spill_reg_store[REGNO (reloadreg)]
6920 = inc_for_reload (reloadreg, oldequiv, rl->out,
6924 /* If we are reloading a pseudo-register that was set by the previous
6925 insn, see if we can get rid of that pseudo-register entirely
6926 by redirecting the previous insn into our reload register. */
6928 else if (optimize && REG_P (old)
6929 && REGNO (old) >= FIRST_PSEUDO_REGISTER
6930 && dead_or_set_p (insn, old)
6931 /* This is unsafe if some other reload
6932 uses the same reg first. */
6933 && ! conflicts_with_override (reloadreg)
6934 && free_for_value_p (REGNO (reloadreg), rl->mode, rl->opnum,
6935 rl->when_needed, old, rl->out, j, 0))
6937 rtx temp = PREV_INSN (insn);
6938 while (temp && NOTE_P (temp))
6939 temp = PREV_INSN (temp);
6941 && NONJUMP_INSN_P (temp)
6942 && GET_CODE (PATTERN (temp)) == SET
6943 && SET_DEST (PATTERN (temp)) == old
6944 /* Make sure we can access insn_operand_constraint. */
6945 && asm_noperands (PATTERN (temp)) < 0
6946 /* This is unsafe if operand occurs more than once in current
6947 insn. Perhaps some occurrences aren't reloaded. */
6948 && count_occurrences (PATTERN (insn), old, 0) == 1)
6950 rtx old = SET_DEST (PATTERN (temp));
6951 /* Store into the reload register instead of the pseudo. */
6952 SET_DEST (PATTERN (temp)) = reloadreg;
6954 /* Verify that resulting insn is valid. */
6955 extract_insn (temp);
6956 if (constrain_operands (1))
6958 /* If the previous insn is an output reload, the source is
6959 a reload register, and its spill_reg_store entry will
6960 contain the previous destination. This is now
6962 if (REG_P (SET_SRC (PATTERN (temp)))
6963 && REGNO (SET_SRC (PATTERN (temp))) < FIRST_PSEUDO_REGISTER)
6965 spill_reg_store[REGNO (SET_SRC (PATTERN (temp)))] = 0;
6966 spill_reg_stored_to[REGNO (SET_SRC (PATTERN (temp)))] = 0;
6969 /* If these are the only uses of the pseudo reg,
6970 pretend for GDB it lives in the reload reg we used. */
6971 if (REG_N_DEATHS (REGNO (old)) == 1
6972 && REG_N_SETS (REGNO (old)) == 1)
6974 reg_renumber[REGNO (old)] = REGNO (reloadreg);
6975 if (ira_conflicts_p)
6976 /* Inform IRA about the change. */
6977 ira_mark_allocation_change (REGNO (old));
6978 alter_reg (REGNO (old), -1, false);
6984 SET_DEST (PATTERN (temp)) = old;
6989 /* We can't do that, so output an insn to load RELOADREG. */
6991 /* If we have a secondary reload, pick up the secondary register
6992 and icode, if any. If OLDEQUIV and OLD are different or
6993 if this is an in-out reload, recompute whether or not we
6994 still need a secondary register and what the icode should
6995 be. If we still need a secondary register and the class or
6996 icode is different, go back to reloading from OLD if using
6997 OLDEQUIV means that we got the wrong type of register. We
6998 cannot have different class or icode due to an in-out reload
6999 because we don't make such reloads when both the input and
7000 output need secondary reload registers. */
7002 if (! special && rl->secondary_in_reload >= 0)
7004 rtx second_reload_reg = 0;
7005 rtx third_reload_reg = 0;
7006 int secondary_reload = rl->secondary_in_reload;
7007 rtx real_oldequiv = oldequiv;
7010 enum insn_code icode;
7011 enum insn_code tertiary_icode = CODE_FOR_nothing;
7013 /* If OLDEQUIV is a pseudo with a MEM, get the real MEM
7014 and similarly for OLD.
7015 See comments in get_secondary_reload in reload.c. */
7016 /* If it is a pseudo that cannot be replaced with its
7017 equivalent MEM, we must fall back to reload_in, which
7018 will have all the necessary substitutions registered.
7019 Likewise for a pseudo that can't be replaced with its
7020 equivalent constant.
7022 Take extra care for subregs of such pseudos. Note that
7023 we cannot use reg_equiv_mem in this case because it is
7024 not in the right mode. */
7027 if (GET_CODE (tmp) == SUBREG)
7028 tmp = SUBREG_REG (tmp);
7030 && REGNO (tmp) >= FIRST_PSEUDO_REGISTER
7031 && (reg_equiv_memory_loc[REGNO (tmp)] != 0
7032 || reg_equiv_constant[REGNO (tmp)] != 0))
7034 if (! reg_equiv_mem[REGNO (tmp)]
7035 || num_not_at_initial_offset
7036 || GET_CODE (oldequiv) == SUBREG)
7037 real_oldequiv = rl->in;
7039 real_oldequiv = reg_equiv_mem[REGNO (tmp)];
7043 if (GET_CODE (tmp) == SUBREG)
7044 tmp = SUBREG_REG (tmp);
7046 && REGNO (tmp) >= FIRST_PSEUDO_REGISTER
7047 && (reg_equiv_memory_loc[REGNO (tmp)] != 0
7048 || reg_equiv_constant[REGNO (tmp)] != 0))
7050 if (! reg_equiv_mem[REGNO (tmp)]
7051 || num_not_at_initial_offset
7052 || GET_CODE (old) == SUBREG)
7055 real_old = reg_equiv_mem[REGNO (tmp)];
7058 second_reload_reg = rld[secondary_reload].reg_rtx;
7059 if (rld[secondary_reload].secondary_in_reload >= 0)
7061 int tertiary_reload = rld[secondary_reload].secondary_in_reload;
7063 third_reload_reg = rld[tertiary_reload].reg_rtx;
7064 tertiary_icode = rld[secondary_reload].secondary_in_icode;
7065 /* We'd have to add more code for quartary reloads. */
7066 gcc_assert (rld[tertiary_reload].secondary_in_reload < 0);
7068 icode = rl->secondary_in_icode;
7070 if ((old != oldequiv && ! rtx_equal_p (old, oldequiv))
7071 || (rl->in != 0 && rl->out != 0))
7073 secondary_reload_info sri, sri2;
7074 enum reg_class new_class, new_t_class;
7076 sri.icode = CODE_FOR_nothing;
7077 sri.prev_sri = NULL;
7078 new_class = targetm.secondary_reload (1, real_oldequiv, rl->rclass,
7081 if (new_class == NO_REGS && sri.icode == CODE_FOR_nothing)
7082 second_reload_reg = 0;
7083 else if (new_class == NO_REGS)
7085 if (reload_adjust_reg_for_icode (&second_reload_reg,
7087 (enum insn_code) sri.icode))
7089 icode = (enum insn_code) sri.icode;
7090 third_reload_reg = 0;
7095 real_oldequiv = real_old;
7098 else if (sri.icode != CODE_FOR_nothing)
7099 /* We currently lack a way to express this in reloads. */
7103 sri2.icode = CODE_FOR_nothing;
7104 sri2.prev_sri = &sri;
7105 new_t_class = targetm.secondary_reload (1, real_oldequiv,
7106 new_class, mode, &sri);
7107 if (new_t_class == NO_REGS && sri2.icode == CODE_FOR_nothing)
7109 if (reload_adjust_reg_for_temp (&second_reload_reg,
7113 third_reload_reg = 0;
7114 tertiary_icode = (enum insn_code) sri2.icode;
7119 real_oldequiv = real_old;
7122 else if (new_t_class == NO_REGS && sri2.icode != CODE_FOR_nothing)
7124 rtx intermediate = second_reload_reg;
7126 if (reload_adjust_reg_for_temp (&intermediate, NULL,
7128 && reload_adjust_reg_for_icode (&third_reload_reg, NULL,
7132 second_reload_reg = intermediate;
7133 tertiary_icode = (enum insn_code) sri2.icode;
7138 real_oldequiv = real_old;
7141 else if (new_t_class != NO_REGS && sri2.icode == CODE_FOR_nothing)
7143 rtx intermediate = second_reload_reg;
7145 if (reload_adjust_reg_for_temp (&intermediate, NULL,
7147 && reload_adjust_reg_for_temp (&third_reload_reg, NULL,
7150 second_reload_reg = intermediate;
7151 tertiary_icode = (enum insn_code) sri2.icode;
7156 real_oldequiv = real_old;
7161 /* This could be handled more intelligently too. */
7163 real_oldequiv = real_old;
7168 /* If we still need a secondary reload register, check
7169 to see if it is being used as a scratch or intermediate
7170 register and generate code appropriately. If we need
7171 a scratch register, use REAL_OLDEQUIV since the form of
7172 the insn may depend on the actual address if it is
7175 if (second_reload_reg)
7177 if (icode != CODE_FOR_nothing)
7179 /* We'd have to add extra code to handle this case. */
7180 gcc_assert (!third_reload_reg);
7182 emit_insn (GEN_FCN (icode) (reloadreg, real_oldequiv,
7183 second_reload_reg));
7188 /* See if we need a scratch register to load the
7189 intermediate register (a tertiary reload). */
7190 if (tertiary_icode != CODE_FOR_nothing)
7192 emit_insn ((GEN_FCN (tertiary_icode)
7193 (second_reload_reg, real_oldequiv,
7194 third_reload_reg)));
7196 else if (third_reload_reg)
7198 gen_reload (third_reload_reg, real_oldequiv,
7201 gen_reload (second_reload_reg, third_reload_reg,
7206 gen_reload (second_reload_reg, real_oldequiv,
7210 oldequiv = second_reload_reg;
7215 if (! special && ! rtx_equal_p (reloadreg, oldequiv))
7217 rtx real_oldequiv = oldequiv;
7219 if ((REG_P (oldequiv)
7220 && REGNO (oldequiv) >= FIRST_PSEUDO_REGISTER
7221 && (reg_equiv_memory_loc[REGNO (oldequiv)] != 0
7222 || reg_equiv_constant[REGNO (oldequiv)] != 0))
7223 || (GET_CODE (oldequiv) == SUBREG
7224 && REG_P (SUBREG_REG (oldequiv))
7225 && (REGNO (SUBREG_REG (oldequiv))
7226 >= FIRST_PSEUDO_REGISTER)
7227 && ((reg_equiv_memory_loc
7228 [REGNO (SUBREG_REG (oldequiv))] != 0)
7229 || (reg_equiv_constant
7230 [REGNO (SUBREG_REG (oldequiv))] != 0)))
7231 || (CONSTANT_P (oldequiv)
7232 && (PREFERRED_RELOAD_CLASS (oldequiv,
7233 REGNO_REG_CLASS (REGNO (reloadreg)))
7235 real_oldequiv = rl->in;
7236 gen_reload (reloadreg, real_oldequiv, rl->opnum,
7240 if (flag_non_call_exceptions)
7241 copy_eh_notes (insn, get_insns ());
7243 /* End this sequence. */
7244 *where = get_insns ();
7247 /* Update reload_override_in so that delete_address_reloads_1
7248 can see the actual register usage. */
7250 reload_override_in[j] = oldequiv;
7253 /* Generate insns to for the output reload RL, which is for the insn described
7254 by CHAIN and has the number J. */
7256 emit_output_reload_insns (struct insn_chain *chain, struct reload *rl,
7260 rtx insn = chain->insn;
7263 enum machine_mode mode;
7267 if (rl->when_needed == RELOAD_OTHER)
7270 push_to_sequence (output_reload_insns[rl->opnum]);
7272 rl_reg_rtx = reload_reg_rtx_for_output[j];
7273 mode = GET_MODE (rl_reg_rtx);
7275 reloadreg = rl_reg_rtx;
7277 /* If we need two reload regs, set RELOADREG to the intermediate
7278 one, since it will be stored into OLD. We might need a secondary
7279 register only for an input reload, so check again here. */
7281 if (rl->secondary_out_reload >= 0)
7284 int secondary_reload = rl->secondary_out_reload;
7285 int tertiary_reload = rld[secondary_reload].secondary_out_reload;
7287 if (REG_P (old) && REGNO (old) >= FIRST_PSEUDO_REGISTER
7288 && reg_equiv_mem[REGNO (old)] != 0)
7289 real_old = reg_equiv_mem[REGNO (old)];
7291 if (secondary_reload_class (0, rl->rclass, mode, real_old) != NO_REGS)
7293 rtx second_reloadreg = reloadreg;
7294 reloadreg = rld[secondary_reload].reg_rtx;
7296 /* See if RELOADREG is to be used as a scratch register
7297 or as an intermediate register. */
7298 if (rl->secondary_out_icode != CODE_FOR_nothing)
7300 /* We'd have to add extra code to handle this case. */
7301 gcc_assert (tertiary_reload < 0);
7303 emit_insn ((GEN_FCN (rl->secondary_out_icode)
7304 (real_old, second_reloadreg, reloadreg)));
7309 /* See if we need both a scratch and intermediate reload
7312 enum insn_code tertiary_icode
7313 = rld[secondary_reload].secondary_out_icode;
7315 /* We'd have to add more code for quartary reloads. */
7316 gcc_assert (tertiary_reload < 0
7317 || rld[tertiary_reload].secondary_out_reload < 0);
7319 if (GET_MODE (reloadreg) != mode)
7320 reloadreg = reload_adjust_reg_for_mode (reloadreg, mode);
7322 if (tertiary_icode != CODE_FOR_nothing)
7324 rtx third_reloadreg = rld[tertiary_reload].reg_rtx;
7327 /* Copy primary reload reg to secondary reload reg.
7328 (Note that these have been swapped above, then
7329 secondary reload reg to OLD using our insn.) */
7331 /* If REAL_OLD is a paradoxical SUBREG, remove it
7332 and try to put the opposite SUBREG on
7334 if (GET_CODE (real_old) == SUBREG
7335 && (GET_MODE_SIZE (GET_MODE (real_old))
7336 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (real_old))))
7337 && 0 != (tem = gen_lowpart_common
7338 (GET_MODE (SUBREG_REG (real_old)),
7340 real_old = SUBREG_REG (real_old), reloadreg = tem;
7342 gen_reload (reloadreg, second_reloadreg,
7343 rl->opnum, rl->when_needed);
7344 emit_insn ((GEN_FCN (tertiary_icode)
7345 (real_old, reloadreg, third_reloadreg)));
7351 /* Copy between the reload regs here and then to
7354 gen_reload (reloadreg, second_reloadreg,
7355 rl->opnum, rl->when_needed);
7356 if (tertiary_reload >= 0)
7358 rtx third_reloadreg = rld[tertiary_reload].reg_rtx;
7360 gen_reload (third_reloadreg, reloadreg,
7361 rl->opnum, rl->when_needed);
7362 reloadreg = third_reloadreg;
7369 /* Output the last reload insn. */
7374 /* Don't output the last reload if OLD is not the dest of
7375 INSN and is in the src and is clobbered by INSN. */
7376 if (! flag_expensive_optimizations
7378 || !(set = single_set (insn))
7379 || rtx_equal_p (old, SET_DEST (set))
7380 || !reg_mentioned_p (old, SET_SRC (set))
7381 || !((REGNO (old) < FIRST_PSEUDO_REGISTER)
7382 && regno_clobbered_p (REGNO (old), insn, rl->mode, 0)))
7383 gen_reload (old, reloadreg, rl->opnum,
7387 /* Look at all insns we emitted, just to be safe. */
7388 for (p = get_insns (); p; p = NEXT_INSN (p))
7391 rtx pat = PATTERN (p);
7393 /* If this output reload doesn't come from a spill reg,
7394 clear any memory of reloaded copies of the pseudo reg.
7395 If this output reload comes from a spill reg,
7396 reg_has_output_reload will make this do nothing. */
7397 note_stores (pat, forget_old_reloads_1, NULL);
7399 if (reg_mentioned_p (rl_reg_rtx, pat))
7401 rtx set = single_set (insn);
7402 if (reload_spill_index[j] < 0
7404 && SET_SRC (set) == rl_reg_rtx)
7406 int src = REGNO (SET_SRC (set));
7408 reload_spill_index[j] = src;
7409 SET_HARD_REG_BIT (reg_is_output_reload, src);
7410 if (find_regno_note (insn, REG_DEAD, src))
7411 SET_HARD_REG_BIT (reg_reloaded_died, src);
7413 if (HARD_REGISTER_P (rl_reg_rtx))
7415 int s = rl->secondary_out_reload;
7416 set = single_set (p);
7417 /* If this reload copies only to the secondary reload
7418 register, the secondary reload does the actual
7420 if (s >= 0 && set == NULL_RTX)
7421 /* We can't tell what function the secondary reload
7422 has and where the actual store to the pseudo is
7423 made; leave new_spill_reg_store alone. */
7426 && SET_SRC (set) == rl_reg_rtx
7427 && SET_DEST (set) == rld[s].reg_rtx)
7429 /* Usually the next instruction will be the
7430 secondary reload insn; if we can confirm
7431 that it is, setting new_spill_reg_store to
7432 that insn will allow an extra optimization. */
7433 rtx s_reg = rld[s].reg_rtx;
7434 rtx next = NEXT_INSN (p);
7435 rld[s].out = rl->out;
7436 rld[s].out_reg = rl->out_reg;
7437 set = single_set (next);
7438 if (set && SET_SRC (set) == s_reg
7439 && ! new_spill_reg_store[REGNO (s_reg)])
7441 SET_HARD_REG_BIT (reg_is_output_reload,
7443 new_spill_reg_store[REGNO (s_reg)] = next;
7447 new_spill_reg_store[REGNO (rl_reg_rtx)] = p;
7452 if (rl->when_needed == RELOAD_OTHER)
7454 emit_insn (other_output_reload_insns[rl->opnum]);
7455 other_output_reload_insns[rl->opnum] = get_insns ();
7458 output_reload_insns[rl->opnum] = get_insns ();
7460 if (flag_non_call_exceptions)
7461 copy_eh_notes (insn, get_insns ());
7466 /* Do input reloading for reload RL, which is for the insn described by CHAIN
7467 and has the number J. */
7469 do_input_reload (struct insn_chain *chain, struct reload *rl, int j)
7471 rtx insn = chain->insn;
7472 rtx old = (rl->in && MEM_P (rl->in)
7473 ? rl->in_reg : rl->in);
7474 rtx reg_rtx = rl->reg_rtx;
7478 enum machine_mode mode;
7480 /* Determine the mode to reload in.
7481 This is very tricky because we have three to choose from.
7482 There is the mode the insn operand wants (rl->inmode).
7483 There is the mode of the reload register RELOADREG.
7484 There is the intrinsic mode of the operand, which we could find
7485 by stripping some SUBREGs.
7486 It turns out that RELOADREG's mode is irrelevant:
7487 we can change that arbitrarily.
7489 Consider (SUBREG:SI foo:QI) as an operand that must be SImode;
7490 then the reload reg may not support QImode moves, so use SImode.
7491 If foo is in memory due to spilling a pseudo reg, this is safe,
7492 because the QImode value is in the least significant part of a
7493 slot big enough for a SImode. If foo is some other sort of
7494 memory reference, then it is impossible to reload this case,
7495 so previous passes had better make sure this never happens.
7497 Then consider a one-word union which has SImode and one of its
7498 members is a float, being fetched as (SUBREG:SF union:SI).
7499 We must fetch that as SFmode because we could be loading into
7500 a float-only register. In this case OLD's mode is correct.
7502 Consider an immediate integer: it has VOIDmode. Here we need
7503 to get a mode from something else.
7505 In some cases, there is a fourth mode, the operand's
7506 containing mode. If the insn specifies a containing mode for
7507 this operand, it overrides all others.
7509 I am not sure whether the algorithm here is always right,
7510 but it does the right things in those cases. */
7512 mode = GET_MODE (old);
7513 if (mode == VOIDmode)
7516 /* We cannot use gen_lowpart_common since it can do the wrong thing
7517 when REG_RTX has a multi-word mode. Note that REG_RTX must
7518 always be a REG here. */
7519 if (GET_MODE (reg_rtx) != mode)
7520 reg_rtx = reload_adjust_reg_for_mode (reg_rtx, mode);
7522 reload_reg_rtx_for_input[j] = reg_rtx;
7525 /* AUTO_INC reloads need to be handled even if inherited. We got an
7526 AUTO_INC reload if reload_out is set but reload_out_reg isn't. */
7527 && (! reload_inherited[j] || (rl->out && ! rl->out_reg))
7528 && ! rtx_equal_p (reg_rtx, old)
7530 emit_input_reload_insns (chain, rld + j, old, j);
7532 /* When inheriting a wider reload, we have a MEM in rl->in,
7533 e.g. inheriting a SImode output reload for
7534 (mem:HI (plus:SI (reg:SI 14 fp) (const_int 10))) */
7535 if (optimize && reload_inherited[j] && rl->in
7537 && MEM_P (rl->in_reg)
7538 && reload_spill_index[j] >= 0
7539 && TEST_HARD_REG_BIT (reg_reloaded_valid, reload_spill_index[j]))
7540 rl->in = regno_reg_rtx[reg_reloaded_contents[reload_spill_index[j]]];
7542 /* If we are reloading a register that was recently stored in with an
7543 output-reload, see if we can prove there was
7544 actually no need to store the old value in it. */
7547 && (reload_inherited[j] || reload_override_in[j])
7550 && spill_reg_store[REGNO (reg_rtx)] != 0
7552 /* There doesn't seem to be any reason to restrict this to pseudos
7553 and doing so loses in the case where we are copying from a
7554 register of the wrong class. */
7555 && !HARD_REGISTER_P (spill_reg_stored_to[REGNO (reg_rtx)])
7557 /* The insn might have already some references to stackslots
7558 replaced by MEMs, while reload_out_reg still names the
7560 && (dead_or_set_p (insn, spill_reg_stored_to[REGNO (reg_rtx)])
7561 || rtx_equal_p (spill_reg_stored_to[REGNO (reg_rtx)], rl->out_reg)))
7562 delete_output_reload (insn, j, REGNO (reg_rtx), reg_rtx);
7565 /* Do output reloading for reload RL, which is for the insn described by
7566 CHAIN and has the number J.
7567 ??? At some point we need to support handling output reloads of
7568 JUMP_INSNs or insns that set cc0. */
7570 do_output_reload (struct insn_chain *chain, struct reload *rl, int j)
7573 rtx insn = chain->insn;
7574 /* If this is an output reload that stores something that is
7575 not loaded in this same reload, see if we can eliminate a previous
7577 rtx pseudo = rl->out_reg;
7578 rtx reg_rtx = rl->reg_rtx;
7580 if (rl->out && reg_rtx)
7582 enum machine_mode mode;
7584 /* Determine the mode to reload in.
7585 See comments above (for input reloading). */
7586 mode = GET_MODE (rl->out);
7587 if (mode == VOIDmode)
7589 /* VOIDmode should never happen for an output. */
7590 if (asm_noperands (PATTERN (insn)) < 0)
7591 /* It's the compiler's fault. */
7592 fatal_insn ("VOIDmode on an output", insn);
7593 error_for_asm (insn, "output operand is constant in %<asm%>");
7594 /* Prevent crash--use something we know is valid. */
7596 rl->out = gen_rtx_REG (mode, REGNO (reg_rtx));
7598 if (GET_MODE (reg_rtx) != mode)
7599 reg_rtx = reload_adjust_reg_for_mode (reg_rtx, mode);
7601 reload_reg_rtx_for_output[j] = reg_rtx;
7606 && ! rtx_equal_p (rl->in_reg, pseudo)
7607 && REGNO (pseudo) >= FIRST_PSEUDO_REGISTER
7608 && reg_last_reload_reg[REGNO (pseudo)])
7610 int pseudo_no = REGNO (pseudo);
7611 int last_regno = REGNO (reg_last_reload_reg[pseudo_no]);
7613 /* We don't need to test full validity of last_regno for
7614 inherit here; we only want to know if the store actually
7615 matches the pseudo. */
7616 if (TEST_HARD_REG_BIT (reg_reloaded_valid, last_regno)
7617 && reg_reloaded_contents[last_regno] == pseudo_no
7618 && spill_reg_store[last_regno]
7619 && rtx_equal_p (pseudo, spill_reg_stored_to[last_regno]))
7620 delete_output_reload (insn, j, last_regno, reg_rtx);
7626 || rtx_equal_p (old, reg_rtx))
7629 /* An output operand that dies right away does need a reload,
7630 but need not be copied from it. Show the new location in the
7632 if ((REG_P (old) || GET_CODE (old) == SCRATCH)
7633 && (note = find_reg_note (insn, REG_UNUSED, old)) != 0)
7635 XEXP (note, 0) = reg_rtx;
7638 /* Likewise for a SUBREG of an operand that dies. */
7639 else if (GET_CODE (old) == SUBREG
7640 && REG_P (SUBREG_REG (old))
7641 && 0 != (note = find_reg_note (insn, REG_UNUSED,
7644 XEXP (note, 0) = gen_lowpart_common (GET_MODE (old), reg_rtx);
7647 else if (GET_CODE (old) == SCRATCH)
7648 /* If we aren't optimizing, there won't be a REG_UNUSED note,
7649 but we don't want to make an output reload. */
7652 /* If is a JUMP_INSN, we can't support output reloads yet. */
7653 gcc_assert (NONJUMP_INSN_P (insn));
7655 emit_output_reload_insns (chain, rld + j, j);
7658 /* A reload copies values of MODE from register SRC to register DEST.
7659 Return true if it can be treated for inheritance purposes like a
7660 group of reloads, each one reloading a single hard register. The
7661 caller has already checked that (reg:MODE SRC) and (reg:MODE DEST)
7662 occupy the same number of hard registers. */
7665 inherit_piecemeal_p (int dest ATTRIBUTE_UNUSED,
7666 int src ATTRIBUTE_UNUSED,
7667 enum machine_mode mode ATTRIBUTE_UNUSED)
7669 #ifdef CANNOT_CHANGE_MODE_CLASS
7670 return (!REG_CANNOT_CHANGE_MODE_P (dest, mode, reg_raw_mode[dest])
7671 && !REG_CANNOT_CHANGE_MODE_P (src, mode, reg_raw_mode[src]));
7677 /* Output insns to reload values in and out of the chosen reload regs. */
7680 emit_reload_insns (struct insn_chain *chain)
7682 rtx insn = chain->insn;
7686 CLEAR_HARD_REG_SET (reg_reloaded_died);
7688 for (j = 0; j < reload_n_operands; j++)
7689 input_reload_insns[j] = input_address_reload_insns[j]
7690 = inpaddr_address_reload_insns[j]
7691 = output_reload_insns[j] = output_address_reload_insns[j]
7692 = outaddr_address_reload_insns[j]
7693 = other_output_reload_insns[j] = 0;
7694 other_input_address_reload_insns = 0;
7695 other_input_reload_insns = 0;
7696 operand_reload_insns = 0;
7697 other_operand_reload_insns = 0;
7699 /* Dump reloads into the dump file. */
7702 fprintf (dump_file, "\nReloads for insn # %d\n", INSN_UID (insn));
7703 debug_reload_to_stream (dump_file);
7706 /* Now output the instructions to copy the data into and out of the
7707 reload registers. Do these in the order that the reloads were reported,
7708 since reloads of base and index registers precede reloads of operands
7709 and the operands may need the base and index registers reloaded. */
7711 for (j = 0; j < n_reloads; j++)
7713 if (rld[j].reg_rtx && HARD_REGISTER_P (rld[j].reg_rtx))
7717 for (i = REGNO (rld[j].reg_rtx); i < END_REGNO (rld[j].reg_rtx); i++)
7718 new_spill_reg_store[i] = 0;
7721 do_input_reload (chain, rld + j, j);
7722 do_output_reload (chain, rld + j, j);
7725 /* Now write all the insns we made for reloads in the order expected by
7726 the allocation functions. Prior to the insn being reloaded, we write
7727 the following reloads:
7729 RELOAD_FOR_OTHER_ADDRESS reloads for input addresses.
7731 RELOAD_OTHER reloads.
7733 For each operand, any RELOAD_FOR_INPADDR_ADDRESS reloads followed
7734 by any RELOAD_FOR_INPUT_ADDRESS reloads followed by the
7735 RELOAD_FOR_INPUT reload for the operand.
7737 RELOAD_FOR_OPADDR_ADDRS reloads.
7739 RELOAD_FOR_OPERAND_ADDRESS reloads.
7741 After the insn being reloaded, we write the following:
7743 For each operand, any RELOAD_FOR_OUTADDR_ADDRESS reloads followed
7744 by any RELOAD_FOR_OUTPUT_ADDRESS reload followed by the
7745 RELOAD_FOR_OUTPUT reload, followed by any RELOAD_OTHER output
7746 reloads for the operand. The RELOAD_OTHER output reloads are
7747 output in descending order by reload number. */
7749 emit_insn_before (other_input_address_reload_insns, insn);
7750 emit_insn_before (other_input_reload_insns, insn);
7752 for (j = 0; j < reload_n_operands; j++)
7754 emit_insn_before (inpaddr_address_reload_insns[j], insn);
7755 emit_insn_before (input_address_reload_insns[j], insn);
7756 emit_insn_before (input_reload_insns[j], insn);
7759 emit_insn_before (other_operand_reload_insns, insn);
7760 emit_insn_before (operand_reload_insns, insn);
7762 for (j = 0; j < reload_n_operands; j++)
7764 rtx x = emit_insn_after (outaddr_address_reload_insns[j], insn);
7765 x = emit_insn_after (output_address_reload_insns[j], x);
7766 x = emit_insn_after (output_reload_insns[j], x);
7767 emit_insn_after (other_output_reload_insns[j], x);
7770 /* For all the spill regs newly reloaded in this instruction,
7771 record what they were reloaded from, so subsequent instructions
7772 can inherit the reloads.
7774 Update spill_reg_store for the reloads of this insn.
7775 Copy the elements that were updated in the loop above. */
7777 for (j = 0; j < n_reloads; j++)
7779 int r = reload_order[j];
7780 int i = reload_spill_index[r];
7782 /* If this is a non-inherited input reload from a pseudo, we must
7783 clear any memory of a previous store to the same pseudo. Only do
7784 something if there will not be an output reload for the pseudo
7786 if (rld[r].in_reg != 0
7787 && ! (reload_inherited[r] || reload_override_in[r]))
7789 rtx reg = rld[r].in_reg;
7791 if (GET_CODE (reg) == SUBREG)
7792 reg = SUBREG_REG (reg);
7795 && REGNO (reg) >= FIRST_PSEUDO_REGISTER
7796 && !REGNO_REG_SET_P (®_has_output_reload, REGNO (reg)))
7798 int nregno = REGNO (reg);
7800 if (reg_last_reload_reg[nregno])
7802 int last_regno = REGNO (reg_last_reload_reg[nregno]);
7804 if (reg_reloaded_contents[last_regno] == nregno)
7805 spill_reg_store[last_regno] = 0;
7810 /* I is nonneg if this reload used a register.
7811 If rld[r].reg_rtx is 0, this is an optional reload
7812 that we opted to ignore. */
7814 if (i >= 0 && rld[r].reg_rtx != 0)
7816 int nr = hard_regno_nregs[i][GET_MODE (rld[r].reg_rtx)];
7819 /* For a multi register reload, we need to check if all or part
7820 of the value lives to the end. */
7821 for (k = 0; k < nr; k++)
7822 if (reload_reg_reaches_end_p (i + k, rld[r].opnum,
7823 rld[r].when_needed))
7824 CLEAR_HARD_REG_BIT (reg_reloaded_valid, i + k);
7826 /* Maybe the spill reg contains a copy of reload_out. */
7828 && (REG_P (rld[r].out)
7832 || REG_P (rld[r].out_reg)))
7835 enum machine_mode mode;
7838 reg = reload_reg_rtx_for_output[r];
7839 mode = GET_MODE (reg);
7840 regno = REGNO (reg);
7841 nregs = hard_regno_nregs[regno][mode];
7842 if (reload_regs_reach_end_p (regno, nregs, rld[r].opnum,
7843 rld[r].when_needed))
7845 rtx out = (REG_P (rld[r].out)
7849 /* AUTO_INC */ : XEXP (rld[r].in_reg, 0));
7850 int out_regno = REGNO (out);
7851 int out_nregs = (!HARD_REGISTER_NUM_P (out_regno) ? 1
7852 : hard_regno_nregs[out_regno][mode]);
7855 spill_reg_store[regno] = new_spill_reg_store[regno];
7856 spill_reg_stored_to[regno] = out;
7857 reg_last_reload_reg[out_regno] = reg;
7859 piecemeal = (HARD_REGISTER_NUM_P (out_regno)
7860 && nregs == out_nregs
7861 && inherit_piecemeal_p (out_regno, regno, mode));
7863 /* If OUT_REGNO is a hard register, it may occupy more than
7864 one register. If it does, say what is in the
7865 rest of the registers assuming that both registers
7866 agree on how many words the object takes. If not,
7867 invalidate the subsequent registers. */
7869 if (HARD_REGISTER_NUM_P (out_regno))
7870 for (k = 1; k < out_nregs; k++)
7871 reg_last_reload_reg[out_regno + k]
7872 = (piecemeal ? regno_reg_rtx[regno + k] : 0);
7874 /* Now do the inverse operation. */
7875 for (k = 0; k < nregs; k++)
7877 CLEAR_HARD_REG_BIT (reg_reloaded_dead, regno + k);
7878 reg_reloaded_contents[regno + k]
7879 = (!HARD_REGISTER_NUM_P (out_regno) || !piecemeal
7882 reg_reloaded_insn[regno + k] = insn;
7883 SET_HARD_REG_BIT (reg_reloaded_valid, regno + k);
7884 if (HARD_REGNO_CALL_PART_CLOBBERED (regno + k, mode))
7885 SET_HARD_REG_BIT (reg_reloaded_call_part_clobbered,
7888 CLEAR_HARD_REG_BIT (reg_reloaded_call_part_clobbered,
7893 /* Maybe the spill reg contains a copy of reload_in. Only do
7894 something if there will not be an output reload for
7895 the register being reloaded. */
7896 else if (rld[r].out_reg == 0
7898 && ((REG_P (rld[r].in)
7899 && !HARD_REGISTER_P (rld[r].in)
7900 && !REGNO_REG_SET_P (®_has_output_reload,
7902 || (REG_P (rld[r].in_reg)
7903 && !REGNO_REG_SET_P (®_has_output_reload,
7904 REGNO (rld[r].in_reg))))
7905 && !reg_set_p (reload_reg_rtx_for_input[r], PATTERN (insn)))
7908 enum machine_mode mode;
7911 reg = reload_reg_rtx_for_input[r];
7912 mode = GET_MODE (reg);
7913 regno = REGNO (reg);
7914 nregs = hard_regno_nregs[regno][mode];
7915 if (reload_regs_reach_end_p (regno, nregs, rld[r].opnum,
7916 rld[r].when_needed))
7923 if (REG_P (rld[r].in)
7924 && REGNO (rld[r].in) >= FIRST_PSEUDO_REGISTER)
7926 else if (REG_P (rld[r].in_reg))
7929 in = XEXP (rld[r].in_reg, 0);
7930 in_regno = REGNO (in);
7932 in_nregs = (!HARD_REGISTER_NUM_P (in_regno) ? 1
7933 : hard_regno_nregs[in_regno][mode]);
7935 reg_last_reload_reg[in_regno] = reg;
7937 piecemeal = (HARD_REGISTER_NUM_P (in_regno)
7938 && nregs == in_nregs
7939 && inherit_piecemeal_p (regno, in_regno, mode));
7941 if (HARD_REGISTER_NUM_P (in_regno))
7942 for (k = 1; k < in_nregs; k++)
7943 reg_last_reload_reg[in_regno + k]
7944 = (piecemeal ? regno_reg_rtx[regno + k] : 0);
7946 /* Unless we inherited this reload, show we haven't
7947 recently done a store.
7948 Previous stores of inherited auto_inc expressions
7949 also have to be discarded. */
7950 if (! reload_inherited[r]
7951 || (rld[r].out && ! rld[r].out_reg))
7952 spill_reg_store[regno] = 0;
7954 for (k = 0; k < nregs; k++)
7956 CLEAR_HARD_REG_BIT (reg_reloaded_dead, regno + k);
7957 reg_reloaded_contents[regno + k]
7958 = (!HARD_REGISTER_NUM_P (in_regno) || !piecemeal
7961 reg_reloaded_insn[regno + k] = insn;
7962 SET_HARD_REG_BIT (reg_reloaded_valid, regno + k);
7963 if (HARD_REGNO_CALL_PART_CLOBBERED (regno + k, mode))
7964 SET_HARD_REG_BIT (reg_reloaded_call_part_clobbered,
7967 CLEAR_HARD_REG_BIT (reg_reloaded_call_part_clobbered,
7974 /* The following if-statement was #if 0'd in 1.34 (or before...).
7975 It's reenabled in 1.35 because supposedly nothing else
7976 deals with this problem. */
7978 /* If a register gets output-reloaded from a non-spill register,
7979 that invalidates any previous reloaded copy of it.
7980 But forget_old_reloads_1 won't get to see it, because
7981 it thinks only about the original insn. So invalidate it here.
7982 Also do the same thing for RELOAD_OTHER constraints where the
7983 output is discarded. */
7985 && ((rld[r].out != 0
7986 && (REG_P (rld[r].out)
7987 || (MEM_P (rld[r].out)
7988 && REG_P (rld[r].out_reg))))
7989 || (rld[r].out == 0 && rld[r].out_reg
7990 && REG_P (rld[r].out_reg))))
7992 rtx out = ((rld[r].out && REG_P (rld[r].out))
7993 ? rld[r].out : rld[r].out_reg);
7994 int out_regno = REGNO (out);
7995 enum machine_mode mode = GET_MODE (out);
7997 /* REG_RTX is now set or clobbered by the main instruction.
7998 As the comment above explains, forget_old_reloads_1 only
7999 sees the original instruction, and there is no guarantee
8000 that the original instruction also clobbered REG_RTX.
8001 For example, if find_reloads sees that the input side of
8002 a matched operand pair dies in this instruction, it may
8003 use the input register as the reload register.
8005 Calling forget_old_reloads_1 is a waste of effort if
8006 REG_RTX is also the output register.
8008 If we know that REG_RTX holds the value of a pseudo
8009 register, the code after the call will record that fact. */
8010 if (rld[r].reg_rtx && rld[r].reg_rtx != out)
8011 forget_old_reloads_1 (rld[r].reg_rtx, NULL_RTX, NULL);
8013 if (!HARD_REGISTER_NUM_P (out_regno))
8015 rtx src_reg, store_insn = NULL_RTX;
8017 reg_last_reload_reg[out_regno] = 0;
8019 /* If we can find a hard register that is stored, record
8020 the storing insn so that we may delete this insn with
8021 delete_output_reload. */
8022 src_reg = reload_reg_rtx_for_output[r];
8024 /* If this is an optional reload, try to find the source reg
8025 from an input reload. */
8028 rtx set = single_set (insn);
8029 if (set && SET_DEST (set) == rld[r].out)
8033 src_reg = SET_SRC (set);
8035 for (k = 0; k < n_reloads; k++)
8037 if (rld[k].in == src_reg)
8039 src_reg = reload_reg_rtx_for_input[k];
8046 store_insn = new_spill_reg_store[REGNO (src_reg)];
8047 if (src_reg && REG_P (src_reg)
8048 && REGNO (src_reg) < FIRST_PSEUDO_REGISTER)
8050 int src_regno, src_nregs, k;
8053 gcc_assert (GET_MODE (src_reg) == mode);
8054 src_regno = REGNO (src_reg);
8055 src_nregs = hard_regno_nregs[src_regno][mode];
8056 /* The place where to find a death note varies with
8057 PRESERVE_DEATH_INFO_REGNO_P . The condition is not
8058 necessarily checked exactly in the code that moves
8059 notes, so just check both locations. */
8060 note = find_regno_note (insn, REG_DEAD, src_regno);
8061 if (! note && store_insn)
8062 note = find_regno_note (store_insn, REG_DEAD, src_regno);
8063 for (k = 0; k < src_nregs; k++)
8065 spill_reg_store[src_regno + k] = store_insn;
8066 spill_reg_stored_to[src_regno + k] = out;
8067 reg_reloaded_contents[src_regno + k] = out_regno;
8068 reg_reloaded_insn[src_regno + k] = store_insn;
8069 CLEAR_HARD_REG_BIT (reg_reloaded_dead, src_regno + k);
8070 SET_HARD_REG_BIT (reg_reloaded_valid, src_regno + k);
8071 if (HARD_REGNO_CALL_PART_CLOBBERED (src_regno + k,
8073 SET_HARD_REG_BIT (reg_reloaded_call_part_clobbered,
8076 CLEAR_HARD_REG_BIT (reg_reloaded_call_part_clobbered,
8078 SET_HARD_REG_BIT (reg_is_output_reload, src_regno + k);
8080 SET_HARD_REG_BIT (reg_reloaded_died, src_regno);
8082 CLEAR_HARD_REG_BIT (reg_reloaded_died, src_regno);
8084 reg_last_reload_reg[out_regno] = src_reg;
8085 /* We have to set reg_has_output_reload here, or else
8086 forget_old_reloads_1 will clear reg_last_reload_reg
8088 SET_REGNO_REG_SET (®_has_output_reload,
8094 int k, out_nregs = hard_regno_nregs[out_regno][mode];
8096 for (k = 0; k < out_nregs; k++)
8097 reg_last_reload_reg[out_regno + k] = 0;
8101 IOR_HARD_REG_SET (reg_reloaded_dead, reg_reloaded_died);
8104 /* Go through the motions to emit INSN and test if it is strictly valid.
8105 Return the emitted insn if valid, else return NULL. */
8108 emit_insn_if_valid_for_reload (rtx insn)
8110 rtx last = get_last_insn ();
8113 insn = emit_insn (insn);
8114 code = recog_memoized (insn);
8118 extract_insn (insn);
8119 /* We want constrain operands to treat this insn strictly in its
8120 validity determination, i.e., the way it would after reload has
8122 if (constrain_operands (1))
8126 delete_insns_since (last);
8130 /* Emit code to perform a reload from IN (which may be a reload register) to
8131 OUT (which may also be a reload register). IN or OUT is from operand
8132 OPNUM with reload type TYPE.
8134 Returns first insn emitted. */
8137 gen_reload (rtx out, rtx in, int opnum, enum reload_type type)
8139 rtx last = get_last_insn ();
8142 /* If IN is a paradoxical SUBREG, remove it and try to put the
8143 opposite SUBREG on OUT. Likewise for a paradoxical SUBREG on OUT. */
8144 if (GET_CODE (in) == SUBREG
8145 && (GET_MODE_SIZE (GET_MODE (in))
8146 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (in))))
8147 && (tem = gen_lowpart_common (GET_MODE (SUBREG_REG (in)), out)) != 0)
8148 in = SUBREG_REG (in), out = tem;
8149 else if (GET_CODE (out) == SUBREG
8150 && (GET_MODE_SIZE (GET_MODE (out))
8151 > GET_MODE_SIZE (GET_MODE (SUBREG_REG (out))))
8152 && (tem = gen_lowpart_common (GET_MODE (SUBREG_REG (out)), in)) != 0)
8153 out = SUBREG_REG (out), in = tem;
8155 /* How to do this reload can get quite tricky. Normally, we are being
8156 asked to reload a simple operand, such as a MEM, a constant, or a pseudo
8157 register that didn't get a hard register. In that case we can just
8158 call emit_move_insn.
8160 We can also be asked to reload a PLUS that adds a register or a MEM to
8161 another register, constant or MEM. This can occur during frame pointer
8162 elimination and while reloading addresses. This case is handled by
8163 trying to emit a single insn to perform the add. If it is not valid,
8164 we use a two insn sequence.
8166 Or we can be asked to reload an unary operand that was a fragment of
8167 an addressing mode, into a register. If it isn't recognized as-is,
8168 we try making the unop operand and the reload-register the same:
8169 (set reg:X (unop:X expr:Y))
8170 -> (set reg:Y expr:Y) (set reg:X (unop:X reg:Y)).
8172 Finally, we could be called to handle an 'o' constraint by putting
8173 an address into a register. In that case, we first try to do this
8174 with a named pattern of "reload_load_address". If no such pattern
8175 exists, we just emit a SET insn and hope for the best (it will normally
8176 be valid on machines that use 'o').
8178 This entire process is made complex because reload will never
8179 process the insns we generate here and so we must ensure that
8180 they will fit their constraints and also by the fact that parts of
8181 IN might be being reloaded separately and replaced with spill registers.
8182 Because of this, we are, in some sense, just guessing the right approach
8183 here. The one listed above seems to work.
8185 ??? At some point, this whole thing needs to be rethought. */
8187 if (GET_CODE (in) == PLUS
8188 && (REG_P (XEXP (in, 0))
8189 || GET_CODE (XEXP (in, 0)) == SUBREG
8190 || MEM_P (XEXP (in, 0)))
8191 && (REG_P (XEXP (in, 1))
8192 || GET_CODE (XEXP (in, 1)) == SUBREG
8193 || CONSTANT_P (XEXP (in, 1))
8194 || MEM_P (XEXP (in, 1))))
8196 /* We need to compute the sum of a register or a MEM and another
8197 register, constant, or MEM, and put it into the reload
8198 register. The best possible way of doing this is if the machine
8199 has a three-operand ADD insn that accepts the required operands.
8201 The simplest approach is to try to generate such an insn and see if it
8202 is recognized and matches its constraints. If so, it can be used.
8204 It might be better not to actually emit the insn unless it is valid,
8205 but we need to pass the insn as an operand to `recog' and
8206 `extract_insn' and it is simpler to emit and then delete the insn if
8207 not valid than to dummy things up. */
8209 rtx op0, op1, tem, insn;
8212 op0 = find_replacement (&XEXP (in, 0));
8213 op1 = find_replacement (&XEXP (in, 1));
8215 /* Since constraint checking is strict, commutativity won't be
8216 checked, so we need to do that here to avoid spurious failure
8217 if the add instruction is two-address and the second operand
8218 of the add is the same as the reload reg, which is frequently
8219 the case. If the insn would be A = B + A, rearrange it so
8220 it will be A = A + B as constrain_operands expects. */
8222 if (REG_P (XEXP (in, 1))
8223 && REGNO (out) == REGNO (XEXP (in, 1)))
8224 tem = op0, op0 = op1, op1 = tem;
8226 if (op0 != XEXP (in, 0) || op1 != XEXP (in, 1))
8227 in = gen_rtx_PLUS (GET_MODE (in), op0, op1);
8229 insn = emit_insn_if_valid_for_reload (gen_rtx_SET (VOIDmode, out, in));
8233 /* If that failed, we must use a conservative two-insn sequence.
8235 Use a move to copy one operand into the reload register. Prefer
8236 to reload a constant, MEM or pseudo since the move patterns can
8237 handle an arbitrary operand. If OP1 is not a constant, MEM or
8238 pseudo and OP1 is not a valid operand for an add instruction, then
8241 After reloading one of the operands into the reload register, add
8242 the reload register to the output register.
8244 If there is another way to do this for a specific machine, a
8245 DEFINE_PEEPHOLE should be specified that recognizes the sequence
8248 code = (int) optab_handler (add_optab, GET_MODE (out))->insn_code;
8250 if (CONSTANT_P (op1) || MEM_P (op1) || GET_CODE (op1) == SUBREG
8252 && REGNO (op1) >= FIRST_PSEUDO_REGISTER)
8253 || (code != CODE_FOR_nothing
8254 && ! ((*insn_data[code].operand[2].predicate)
8255 (op1, insn_data[code].operand[2].mode))))
8256 tem = op0, op0 = op1, op1 = tem;
8258 gen_reload (out, op0, opnum, type);
8260 /* If OP0 and OP1 are the same, we can use OUT for OP1.
8261 This fixes a problem on the 32K where the stack pointer cannot
8262 be used as an operand of an add insn. */
8264 if (rtx_equal_p (op0, op1))
8267 insn = emit_insn_if_valid_for_reload (gen_add2_insn (out, op1));
8270 /* Add a REG_EQUIV note so that find_equiv_reg can find it. */
8271 set_unique_reg_note (insn, REG_EQUIV, in);
8275 /* If that failed, copy the address register to the reload register.
8276 Then add the constant to the reload register. */
8278 gcc_assert (!reg_overlap_mentioned_p (out, op0));
8279 gen_reload (out, op1, opnum, type);
8280 insn = emit_insn (gen_add2_insn (out, op0));
8281 set_unique_reg_note (insn, REG_EQUIV, in);
8284 #ifdef SECONDARY_MEMORY_NEEDED
8285 /* If we need a memory location to do the move, do it that way. */
8286 else if ((REG_P (in)
8287 || (GET_CODE (in) == SUBREG && REG_P (SUBREG_REG (in))))
8288 && reg_or_subregno (in) < FIRST_PSEUDO_REGISTER
8290 || (GET_CODE (out) == SUBREG && REG_P (SUBREG_REG (out))))
8291 && reg_or_subregno (out) < FIRST_PSEUDO_REGISTER
8292 && SECONDARY_MEMORY_NEEDED (REGNO_REG_CLASS (reg_or_subregno (in)),
8293 REGNO_REG_CLASS (reg_or_subregno (out)),
8296 /* Get the memory to use and rewrite both registers to its mode. */
8297 rtx loc = get_secondary_mem (in, GET_MODE (out), opnum, type);
8299 if (GET_MODE (loc) != GET_MODE (out))
8300 out = gen_rtx_REG (GET_MODE (loc), REGNO (out));
8302 if (GET_MODE (loc) != GET_MODE (in))
8303 in = gen_rtx_REG (GET_MODE (loc), REGNO (in));
8305 gen_reload (loc, in, opnum, type);
8306 gen_reload (out, loc, opnum, type);
8309 else if (REG_P (out) && UNARY_P (in))
8316 op1 = find_replacement (&XEXP (in, 0));
8317 if (op1 != XEXP (in, 0))
8318 in = gen_rtx_fmt_e (GET_CODE (in), GET_MODE (in), op1);
8320 /* First, try a plain SET. */
8321 set = emit_insn_if_valid_for_reload (gen_rtx_SET (VOIDmode, out, in));
8325 /* If that failed, move the inner operand to the reload
8326 register, and try the same unop with the inner expression
8327 replaced with the reload register. */
8329 if (GET_MODE (op1) != GET_MODE (out))
8330 out_moded = gen_rtx_REG (GET_MODE (op1), REGNO (out));
8334 gen_reload (out_moded, op1, opnum, type);
8337 = gen_rtx_SET (VOIDmode, out,
8338 gen_rtx_fmt_e (GET_CODE (in), GET_MODE (in),
8340 insn = emit_insn_if_valid_for_reload (insn);
8343 set_unique_reg_note (insn, REG_EQUIV, in);
8347 fatal_insn ("Failure trying to reload:", set);
8349 /* If IN is a simple operand, use gen_move_insn. */
8350 else if (OBJECT_P (in) || GET_CODE (in) == SUBREG)
8352 tem = emit_insn (gen_move_insn (out, in));
8353 /* IN may contain a LABEL_REF, if so add a REG_LABEL_OPERAND note. */
8354 mark_jump_label (in, tem, 0);
8357 #ifdef HAVE_reload_load_address
8358 else if (HAVE_reload_load_address)
8359 emit_insn (gen_reload_load_address (out, in));
8362 /* Otherwise, just write (set OUT IN) and hope for the best. */
8364 emit_insn (gen_rtx_SET (VOIDmode, out, in));
8366 /* Return the first insn emitted.
8367 We can not just return get_last_insn, because there may have
8368 been multiple instructions emitted. Also note that gen_move_insn may
8369 emit more than one insn itself, so we can not assume that there is one
8370 insn emitted per emit_insn_before call. */
8372 return last ? NEXT_INSN (last) : get_insns ();
8375 /* Delete a previously made output-reload whose result we now believe
8376 is not needed. First we double-check.
8378 INSN is the insn now being processed.
8379 LAST_RELOAD_REG is the hard register number for which we want to delete
8380 the last output reload.
8381 J is the reload-number that originally used REG. The caller has made
8382 certain that reload J doesn't use REG any longer for input.
8383 NEW_RELOAD_REG is reload register that reload J is using for REG. */
8386 delete_output_reload (rtx insn, int j, int last_reload_reg, rtx new_reload_reg)
8388 rtx output_reload_insn = spill_reg_store[last_reload_reg];
8389 rtx reg = spill_reg_stored_to[last_reload_reg];
8392 int n_inherited = 0;
8396 /* It is possible that this reload has been only used to set another reload
8397 we eliminated earlier and thus deleted this instruction too. */
8398 if (INSN_DELETED_P (output_reload_insn))
8401 /* Get the raw pseudo-register referred to. */
8403 while (GET_CODE (reg) == SUBREG)
8404 reg = SUBREG_REG (reg);
8405 substed = reg_equiv_memory_loc[REGNO (reg)];
8407 /* This is unsafe if the operand occurs more often in the current
8408 insn than it is inherited. */
8409 for (k = n_reloads - 1; k >= 0; k--)
8411 rtx reg2 = rld[k].in;
8414 if (MEM_P (reg2) || reload_override_in[k])
8415 reg2 = rld[k].in_reg;
8417 if (rld[k].out && ! rld[k].out_reg)
8418 reg2 = XEXP (rld[k].in_reg, 0);
8420 while (GET_CODE (reg2) == SUBREG)
8421 reg2 = SUBREG_REG (reg2);
8422 if (rtx_equal_p (reg2, reg))
8424 if (reload_inherited[k] || reload_override_in[k] || k == j)
8430 n_occurrences = count_occurrences (PATTERN (insn), reg, 0);
8431 if (CALL_P (insn) && CALL_INSN_FUNCTION_USAGE (insn))
8432 n_occurrences += count_occurrences (CALL_INSN_FUNCTION_USAGE (insn),
8435 n_occurrences += count_occurrences (PATTERN (insn),
8436 eliminate_regs (substed, VOIDmode,
8438 for (i1 = reg_equiv_alt_mem_list[REGNO (reg)]; i1; i1 = XEXP (i1, 1))
8440 gcc_assert (!rtx_equal_p (XEXP (i1, 0), substed));
8441 n_occurrences += count_occurrences (PATTERN (insn), XEXP (i1, 0), 0);
8443 if (n_occurrences > n_inherited)
8446 /* If the pseudo-reg we are reloading is no longer referenced
8447 anywhere between the store into it and here,
8448 and we're within the same basic block, then the value can only
8449 pass through the reload reg and end up here.
8450 Otherwise, give up--return. */
8451 for (i1 = NEXT_INSN (output_reload_insn);
8452 i1 != insn; i1 = NEXT_INSN (i1))
8454 if (NOTE_INSN_BASIC_BLOCK_P (i1))
8456 if ((NONJUMP_INSN_P (i1) || CALL_P (i1))
8457 && reg_mentioned_p (reg, PATTERN (i1)))
8459 /* If this is USE in front of INSN, we only have to check that
8460 there are no more references than accounted for by inheritance. */
8461 while (NONJUMP_INSN_P (i1) && GET_CODE (PATTERN (i1)) == USE)
8463 n_occurrences += rtx_equal_p (reg, XEXP (PATTERN (i1), 0)) != 0;
8464 i1 = NEXT_INSN (i1);
8466 if (n_occurrences <= n_inherited && i1 == insn)
8472 /* We will be deleting the insn. Remove the spill reg information. */
8473 for (k = hard_regno_nregs[last_reload_reg][GET_MODE (reg)]; k-- > 0; )
8475 spill_reg_store[last_reload_reg + k] = 0;
8476 spill_reg_stored_to[last_reload_reg + k] = 0;
8479 /* The caller has already checked that REG dies or is set in INSN.
8480 It has also checked that we are optimizing, and thus some
8481 inaccuracies in the debugging information are acceptable.
8482 So we could just delete output_reload_insn. But in some cases
8483 we can improve the debugging information without sacrificing
8484 optimization - maybe even improving the code: See if the pseudo
8485 reg has been completely replaced with reload regs. If so, delete
8486 the store insn and forget we had a stack slot for the pseudo. */
8487 if (rld[j].out != rld[j].in
8488 && REG_N_DEATHS (REGNO (reg)) == 1
8489 && REG_N_SETS (REGNO (reg)) == 1
8490 && REG_BASIC_BLOCK (REGNO (reg)) >= NUM_FIXED_BLOCKS
8491 && find_regno_note (insn, REG_DEAD, REGNO (reg)))
8495 /* We know that it was used only between here and the beginning of
8496 the current basic block. (We also know that the last use before
8497 INSN was the output reload we are thinking of deleting, but never
8498 mind that.) Search that range; see if any ref remains. */
8499 for (i2 = PREV_INSN (insn); i2; i2 = PREV_INSN (i2))
8501 rtx set = single_set (i2);
8503 /* Uses which just store in the pseudo don't count,
8504 since if they are the only uses, they are dead. */
8505 if (set != 0 && SET_DEST (set) == reg)
8510 if ((NONJUMP_INSN_P (i2) || CALL_P (i2))
8511 && reg_mentioned_p (reg, PATTERN (i2)))
8513 /* Some other ref remains; just delete the output reload we
8515 delete_address_reloads (output_reload_insn, insn);
8516 delete_insn (output_reload_insn);
8521 /* Delete the now-dead stores into this pseudo. Note that this
8522 loop also takes care of deleting output_reload_insn. */
8523 for (i2 = PREV_INSN (insn); i2; i2 = PREV_INSN (i2))
8525 rtx set = single_set (i2);
8527 if (set != 0 && SET_DEST (set) == reg)
8529 delete_address_reloads (i2, insn);
8537 /* For the debugging info, say the pseudo lives in this reload reg. */
8538 reg_renumber[REGNO (reg)] = REGNO (new_reload_reg);
8539 if (ira_conflicts_p)
8540 /* Inform IRA about the change. */
8541 ira_mark_allocation_change (REGNO (reg));
8542 alter_reg (REGNO (reg), -1, false);
8546 delete_address_reloads (output_reload_insn, insn);
8547 delete_insn (output_reload_insn);
8551 /* We are going to delete DEAD_INSN. Recursively delete loads of
8552 reload registers used in DEAD_INSN that are not used till CURRENT_INSN.
8553 CURRENT_INSN is being reloaded, so we have to check its reloads too. */
8555 delete_address_reloads (rtx dead_insn, rtx current_insn)
8557 rtx set = single_set (dead_insn);
8558 rtx set2, dst, prev, next;
8561 rtx dst = SET_DEST (set);
8563 delete_address_reloads_1 (dead_insn, XEXP (dst, 0), current_insn);
8565 /* If we deleted the store from a reloaded post_{in,de}c expression,
8566 we can delete the matching adds. */
8567 prev = PREV_INSN (dead_insn);
8568 next = NEXT_INSN (dead_insn);
8569 if (! prev || ! next)
8571 set = single_set (next);
8572 set2 = single_set (prev);
8574 || GET_CODE (SET_SRC (set)) != PLUS || GET_CODE (SET_SRC (set2)) != PLUS
8575 || !CONST_INT_P (XEXP (SET_SRC (set), 1))
8576 || !CONST_INT_P (XEXP (SET_SRC (set2), 1)))
8578 dst = SET_DEST (set);
8579 if (! rtx_equal_p (dst, SET_DEST (set2))
8580 || ! rtx_equal_p (dst, XEXP (SET_SRC (set), 0))
8581 || ! rtx_equal_p (dst, XEXP (SET_SRC (set2), 0))
8582 || (INTVAL (XEXP (SET_SRC (set), 1))
8583 != -INTVAL (XEXP (SET_SRC (set2), 1))))
8585 delete_related_insns (prev);
8586 delete_related_insns (next);
8589 /* Subfunction of delete_address_reloads: process registers found in X. */
8591 delete_address_reloads_1 (rtx dead_insn, rtx x, rtx current_insn)
8593 rtx prev, set, dst, i2;
8595 enum rtx_code code = GET_CODE (x);
8599 const char *fmt = GET_RTX_FORMAT (code);
8600 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
8603 delete_address_reloads_1 (dead_insn, XEXP (x, i), current_insn);
8604 else if (fmt[i] == 'E')
8606 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
8607 delete_address_reloads_1 (dead_insn, XVECEXP (x, i, j),
8614 if (spill_reg_order[REGNO (x)] < 0)
8617 /* Scan backwards for the insn that sets x. This might be a way back due
8619 for (prev = PREV_INSN (dead_insn); prev; prev = PREV_INSN (prev))
8621 code = GET_CODE (prev);
8622 if (code == CODE_LABEL || code == JUMP_INSN)
8626 if (reg_set_p (x, PATTERN (prev)))
8628 if (reg_referenced_p (x, PATTERN (prev)))
8631 if (! prev || INSN_UID (prev) < reload_first_uid)
8633 /* Check that PREV only sets the reload register. */
8634 set = single_set (prev);
8637 dst = SET_DEST (set);
8639 || ! rtx_equal_p (dst, x))
8641 if (! reg_set_p (dst, PATTERN (dead_insn)))
8643 /* Check if DST was used in a later insn -
8644 it might have been inherited. */
8645 for (i2 = NEXT_INSN (dead_insn); i2; i2 = NEXT_INSN (i2))
8651 if (reg_referenced_p (dst, PATTERN (i2)))
8653 /* If there is a reference to the register in the current insn,
8654 it might be loaded in a non-inherited reload. If no other
8655 reload uses it, that means the register is set before
8657 if (i2 == current_insn)
8659 for (j = n_reloads - 1; j >= 0; j--)
8660 if ((rld[j].reg_rtx == dst && reload_inherited[j])
8661 || reload_override_in[j] == dst)
8663 for (j = n_reloads - 1; j >= 0; j--)
8664 if (rld[j].in && rld[j].reg_rtx == dst)
8673 /* If DST is still live at CURRENT_INSN, check if it is used for
8674 any reload. Note that even if CURRENT_INSN sets DST, we still
8675 have to check the reloads. */
8676 if (i2 == current_insn)
8678 for (j = n_reloads - 1; j >= 0; j--)
8679 if ((rld[j].reg_rtx == dst && reload_inherited[j])
8680 || reload_override_in[j] == dst)
8682 /* ??? We can't finish the loop here, because dst might be
8683 allocated to a pseudo in this block if no reload in this
8684 block needs any of the classes containing DST - see
8685 spill_hard_reg. There is no easy way to tell this, so we
8686 have to scan till the end of the basic block. */
8688 if (reg_set_p (dst, PATTERN (i2)))
8692 delete_address_reloads_1 (prev, SET_SRC (set), current_insn);
8693 reg_reloaded_contents[REGNO (dst)] = -1;
8697 /* Output reload-insns to reload VALUE into RELOADREG.
8698 VALUE is an autoincrement or autodecrement RTX whose operand
8699 is a register or memory location;
8700 so reloading involves incrementing that location.
8701 IN is either identical to VALUE, or some cheaper place to reload from.
8703 INC_AMOUNT is the number to increment or decrement by (always positive).
8704 This cannot be deduced from VALUE.
8706 Return the instruction that stores into RELOADREG. */
8709 inc_for_reload (rtx reloadreg, rtx in, rtx value, int inc_amount)
8711 /* REG or MEM to be copied and incremented. */
8712 rtx incloc = find_replacement (&XEXP (value, 0));
8713 /* Nonzero if increment after copying. */
8714 int post = (GET_CODE (value) == POST_DEC || GET_CODE (value) == POST_INC
8715 || GET_CODE (value) == POST_MODIFY);
8721 rtx real_in = in == value ? incloc : in;
8723 /* No hard register is equivalent to this register after
8724 inc/dec operation. If REG_LAST_RELOAD_REG were nonzero,
8725 we could inc/dec that register as well (maybe even using it for
8726 the source), but I'm not sure it's worth worrying about. */
8728 reg_last_reload_reg[REGNO (incloc)] = 0;
8730 if (GET_CODE (value) == PRE_MODIFY || GET_CODE (value) == POST_MODIFY)
8732 gcc_assert (GET_CODE (XEXP (value, 1)) == PLUS);
8733 inc = find_replacement (&XEXP (XEXP (value, 1), 1));
8737 if (GET_CODE (value) == PRE_DEC || GET_CODE (value) == POST_DEC)
8738 inc_amount = -inc_amount;
8740 inc = GEN_INT (inc_amount);
8743 /* If this is post-increment, first copy the location to the reload reg. */
8744 if (post && real_in != reloadreg)
8745 emit_insn (gen_move_insn (reloadreg, real_in));
8749 /* See if we can directly increment INCLOC. Use a method similar to
8750 that in gen_reload. */
8752 last = get_last_insn ();
8753 add_insn = emit_insn (gen_rtx_SET (VOIDmode, incloc,
8754 gen_rtx_PLUS (GET_MODE (incloc),
8757 code = recog_memoized (add_insn);
8760 extract_insn (add_insn);
8761 if (constrain_operands (1))
8763 /* If this is a pre-increment and we have incremented the value
8764 where it lives, copy the incremented value to RELOADREG to
8765 be used as an address. */
8768 emit_insn (gen_move_insn (reloadreg, incloc));
8773 delete_insns_since (last);
8776 /* If couldn't do the increment directly, must increment in RELOADREG.
8777 The way we do this depends on whether this is pre- or post-increment.
8778 For pre-increment, copy INCLOC to the reload register, increment it
8779 there, then save back. */
8783 if (in != reloadreg)
8784 emit_insn (gen_move_insn (reloadreg, real_in));
8785 emit_insn (gen_add2_insn (reloadreg, inc));
8786 store = emit_insn (gen_move_insn (incloc, reloadreg));
8791 Because this might be a jump insn or a compare, and because RELOADREG
8792 may not be available after the insn in an input reload, we must do
8793 the incrementation before the insn being reloaded for.
8795 We have already copied IN to RELOADREG. Increment the copy in
8796 RELOADREG, save that back, then decrement RELOADREG so it has
8797 the original value. */
8799 emit_insn (gen_add2_insn (reloadreg, inc));
8800 store = emit_insn (gen_move_insn (incloc, reloadreg));
8801 if (CONST_INT_P (inc))
8802 emit_insn (gen_add2_insn (reloadreg, GEN_INT (-INTVAL (inc))));
8804 emit_insn (gen_sub2_insn (reloadreg, inc));
8812 add_auto_inc_notes (rtx insn, rtx x)
8814 enum rtx_code code = GET_CODE (x);
8818 if (code == MEM && auto_inc_p (XEXP (x, 0)))
8820 add_reg_note (insn, REG_INC, XEXP (XEXP (x, 0), 0));
8824 /* Scan all the operand sub-expressions. */
8825 fmt = GET_RTX_FORMAT (code);
8826 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
8829 add_auto_inc_notes (insn, XEXP (x, i));
8830 else if (fmt[i] == 'E')
8831 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
8832 add_auto_inc_notes (insn, XVECEXP (x, i, j));
8837 /* Copy EH notes from an insn to its reloads. */
8839 copy_eh_notes (rtx insn, rtx x)
8841 rtx eh_note = find_reg_note (insn, REG_EH_REGION, NULL_RTX);
8844 for (; x != 0; x = NEXT_INSN (x))
8846 if (may_trap_p (PATTERN (x)))
8847 add_reg_note (x, REG_EH_REGION, XEXP (eh_note, 0));
8852 /* This is used by reload pass, that does emit some instructions after
8853 abnormal calls moving basic block end, but in fact it wants to emit
8854 them on the edge. Looks for abnormal call edges, find backward the
8855 proper call and fix the damage.
8857 Similar handle instructions throwing exceptions internally. */
8859 fixup_abnormal_edges (void)
8861 bool inserted = false;
8869 /* Look for cases we are interested in - calls or instructions causing
8871 FOR_EACH_EDGE (e, ei, bb->succs)
8873 if (e->flags & EDGE_ABNORMAL_CALL)
8875 if ((e->flags & (EDGE_ABNORMAL | EDGE_EH))
8876 == (EDGE_ABNORMAL | EDGE_EH))
8879 if (e && !CALL_P (BB_END (bb))
8880 && !can_throw_internal (BB_END (bb)))
8884 /* Get past the new insns generated. Allow notes, as the insns
8885 may be already deleted. */
8887 while ((NONJUMP_INSN_P (insn) || NOTE_P (insn))
8888 && !can_throw_internal (insn)
8889 && insn != BB_HEAD (bb))
8890 insn = PREV_INSN (insn);
8892 if (CALL_P (insn) || can_throw_internal (insn))
8896 stop = NEXT_INSN (BB_END (bb));
8898 insn = NEXT_INSN (insn);
8900 FOR_EACH_EDGE (e, ei, bb->succs)
8901 if (e->flags & EDGE_FALLTHRU)
8904 while (insn && insn != stop)
8906 next = NEXT_INSN (insn);
8911 /* Sometimes there's still the return value USE.
8912 If it's placed after a trapping call (i.e. that
8913 call is the last insn anyway), we have no fallthru
8914 edge. Simply delete this use and don't try to insert
8915 on the non-existent edge. */
8916 if (GET_CODE (PATTERN (insn)) != USE)
8918 /* We're not deleting it, we're moving it. */
8919 INSN_DELETED_P (insn) = 0;
8920 PREV_INSN (insn) = NULL_RTX;
8921 NEXT_INSN (insn) = NULL_RTX;
8923 insert_insn_on_edge (insn, e);
8927 else if (!BARRIER_P (insn))
8928 set_block_for_insn (insn, NULL);
8933 /* It may be that we don't find any such trapping insn. In this
8934 case we discovered quite late that the insn that had been
8935 marked as can_throw_internal in fact couldn't trap at all.
8936 So we should in fact delete the EH edges out of the block. */
8938 purge_dead_edges (bb);
8942 /* We've possibly turned single trapping insn into multiple ones. */
8943 if (flag_non_call_exceptions)
8946 blocks = sbitmap_alloc (last_basic_block);
8947 sbitmap_ones (blocks);
8948 find_many_sub_basic_blocks (blocks);
8949 sbitmap_free (blocks);
8953 commit_edge_insertions ();
8955 #ifdef ENABLE_CHECKING
8956 /* Verify that we didn't turn one trapping insn into many, and that
8957 we found and corrected all of the problems wrt fixups on the
8959 verify_flow_info ();