* config/i386/winnt.c (i386_pe_output_labelref); Correct

[pf3gnuchains/gcc-fork.git] / gcc / flags.h

/* Compilation switch flag definitions for GCC.
   Copyright (C) 1987, 1988, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2002,
   2003, 2004
   Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.

GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING.  If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.  */

#ifndef GCC_FLAGS_H
#define GCC_FLAGS_H

enum debug_info_type
{
  NO_DEBUG,         /* Write no debug info.  */
  DBX_DEBUG,        /* Write BSD .stabs for DBX (using dbxout.c).  */
  SDB_DEBUG,        /* Write COFF for (old) SDB (using sdbout.c).  */
  DWARF_DEBUG,      /* Write Dwarf debug info (using dwarfout.c).  */
  DWARF2_DEBUG,     /* Write Dwarf v2 debug info (using dwarf2out.c).  */
  XCOFF_DEBUG,      /* Write IBM/Xcoff debug info (using dbxout.c).  */
  VMS_DEBUG,        /* Write VMS debug info (using vmsdbgout.c).  */
  VMS_AND_DWARF2_DEBUG /* Write VMS debug info (using vmsdbgout.c).
                          and DWARF v2 debug info (using dwarf2out.c).  */
};

/* Specify which kind of debugging info to generate.  */
extern enum debug_info_type write_symbols;

/* Names of debug_info_type, for error messages.  */
extern const char *const debug_type_names[];

enum debug_info_level
{
  DINFO_LEVEL_NONE,     /* Write no debugging info.  */
  DINFO_LEVEL_TERSE,    /* Write minimal info to support tracebacks only.  */
  DINFO_LEVEL_NORMAL,   /* Write info for all declarations (and line table).  */
  DINFO_LEVEL_VERBOSE   /* Write normal info plus #define/#undef info.  */
};

/* Specify how much debugging info to generate.  */
extern enum debug_info_level debug_info_level;

/* Nonzero means use GNU-only extensions in the generated symbolic
   debugging information.  */
extern bool use_gnu_debug_info_extensions;

/* Nonzero means emit debugging information only for symbols which are used.  */
extern int flag_debug_only_used_symbols;

/* Nonzero means do optimizations.  -opt.  */

extern int optimize;

/* Nonzero means optimize for size.  -Os.  */

extern int optimize_size;

/* Don't print functions as they are compiled and don't print
   times taken by the various passes.  -quiet.  */

extern int quiet_flag;

/* Print memory still in use at end of compilation (which may have little
   to do with peak memory consumption).  -fmem-report.  */

extern int mem_report;

/* Don't print warning messages.  -w.  */

extern bool inhibit_warnings;

/* Don't suppress warnings from system headers.  -Wsystem-headers.  */

extern bool warn_system_headers;

/* Do print extra warnings (such as for uninitialized variables).
   -W/-Wextra.  */

extern bool extra_warnings;

/* If -Werror.  */

extern bool warnings_are_errors;

/* Nonzero to warn about unused variables, functions et.al.  Use
   set_Wunused() to update the -Wunused-* flags that correspond to the
   -Wunused option.  */

extern void set_Wunused (int setting);

extern bool warn_unused_function;
extern bool warn_unused_label;
extern bool warn_unused_parameter;
extern bool warn_unused_variable;
extern bool warn_unused_value;

/* Nonzero to warn about code which is never reached.  */

extern bool warn_notreached;

/* Nonzero means warn if inline function is too large.  */

extern bool warn_inline;

/* Nonzero to warn about variables used before they are initialized.  */

extern int warn_uninitialized;

/* Nonzero means warn about all declarations which shadow others.  */

extern bool warn_shadow;

/* Warn if a switch on an enum, that does not have a default case,
   fails to have a case for every enum value.  */

extern bool warn_switch;

/* Warn if a switch does not have a default case.  */

extern bool warn_switch_default;

/* Warn if a switch on an enum fails to have a case for every enum
   value (regardless of the presence or otherwise of a default case).  */

extern bool warn_switch_enum;

/* Nonzero means warn about function definitions that default the return type
   or that use a null return and have a return-type other than void.  */

extern int warn_return_type;

/* Warn about functions which might be candidates for attribute noreturn.  */

extern bool warn_missing_noreturn;

/* Nonzero means warn about pointer casts that increase the required
   alignment of the target type (and might therefore lead to a crash
   due to a misaligned access).  */

extern bool warn_cast_align;

/* Nonzero means warn about any objects definitions whose size is larger
   than N bytes.  Also want about function definitions whose returned
   values are larger than N bytes. The value N is in `larger_than_size'.  */

extern bool warn_larger_than;
extern HOST_WIDE_INT larger_than_size;

/* Warn if a function returns an aggregate,
   since there are often incompatible calling conventions for doing this.  */

extern bool warn_aggregate_return;

/* Warn if packed attribute on struct is unnecessary and inefficient.  */

extern bool warn_packed;

/* Warn when gcc pads a structure to an alignment boundary.  */

extern bool warn_padded;

/* Warn when an optimization pass is disabled.  */

extern bool warn_disabled_optimization;

/* Nonzero means warn about uses of __attribute__((deprecated)) 
   declarations.  */

extern bool warn_deprecated_decl;

/* Nonzero means warn about constructs which might not be strict
   aliasing safe.  */

extern int warn_strict_aliasing;

/* Nonzero if generating code to do profiling.  */

extern int profile_flag;

/* Nonzero if generating code to profile program flow graph arcs.  */

extern int profile_arc_flag;

/* Nonzero if value profile should be measured.  */

extern int flag_profile_values;

/* Nonzero if generating info for gcov to calculate line test coverage.  */

extern int flag_test_coverage;

/* Nonzero indicates that branch taken probabilities should be calculated.  */

extern int flag_branch_probabilities;

/* Nonzero if basic blocks should be reordered.  */

extern int flag_reorder_blocks;

/* Nonzero if basic blocks should be partitioned into hot and cold
   sections of the .o file, in addition to being reordered.  */

extern int flag_reorder_blocks_and_partition;

/* Nonzero if functions should be reordered.  */

extern int flag_reorder_functions;

/* Nonzero if registers should be renamed.  */

extern int flag_rename_registers;

/* Nonzero for -pedantic switch: warn about anything
   that standard C forbids.  */

extern int pedantic;

/* Temporarily suppress certain warnings.
   This is set while reading code from a system header file.  */

extern int in_system_header;

/* Nonzero for -dp: annotate the assembly with a comment describing the
   pattern and alternative used.  */

extern int flag_print_asm_name;
\f
/* Now the symbols that are set with `-f' switches.  */

/* Nonzero means `char' should be signed.  */

extern int flag_signed_char;

/* Nonzero means give an enum type only as many bytes as it needs.  A value
   of 2 means it has not yet been initialized.  */

extern int flag_short_enums;

/* Nonzero for -fcaller-saves: allocate values in regs that need to
   be saved across function calls, if that produces overall better code.
   Optional now, so people can test it.  */

extern int flag_caller_saves;

/* Nonzero for -fpcc-struct-return: return values the same way PCC does.  */

extern int flag_pcc_struct_return;

/* Nonzero for -fforce-mem: load memory value into a register
   before arithmetic on it.  This makes better cse but slower compilation.  */

extern int flag_force_mem;

/* Nonzero for -fforce-addr: load memory address into a register before
   reference to memory.  This makes better cse but slower compilation.  */

extern int flag_force_addr;

/* Nonzero for -fdefer-pop: don't pop args after each function call;
   instead save them up to pop many calls' args with one insns.  */

extern int flag_defer_pop;

/* Nonzero for -ffloat-store: don't allocate floats and doubles
   in extended-precision registers.  */

extern int flag_float_store;

/* Nonzero enables strength-reduction in loop.c.  */

extern int flag_strength_reduce;

/* Nonzero enables loop unrolling in unroll.c.  Only loops for which the
   number of iterations can be calculated at compile-time (UNROLL_COMPLETELY,
   UNROLL_MODULO) or at run-time (preconditioned to be UNROLL_MODULO) are
   unrolled.  */

extern int flag_old_unroll_loops;

/* Nonzero enables loop unrolling in unroll.c.  All loops are unrolled.
   This is generally not a win.  */

extern int flag_old_unroll_all_loops;

/* Nonzero forces all invariant computations in loops to be moved
   outside the loop.  */

extern int flag_move_all_movables;

/* Nonzero enables prefetch optimizations for arrays in loops.  */

extern int flag_prefetch_loop_arrays;

/* Nonzero forces all general induction variables in loops to be
   strength reduced.  */

extern int flag_reduce_all_givs;

/* Nonzero for -fcse-follow-jumps:
   have cse follow jumps to do a more extensive job.  */

extern int flag_cse_follow_jumps;

/* Nonzero for -fcse-skip-blocks:
   have cse follow a branch around a block.  */

extern int flag_cse_skip_blocks;

/* Nonzero for -fexpensive-optimizations:
   perform miscellaneous relatively-expensive optimizations.  */
extern int flag_expensive_optimizations;

/* Nonzero means to use global dataflow analysis to eliminate
   useless null pointer tests.  */
extern int flag_delete_null_pointer_checks;

/* Nonzero means don't put addresses of constant functions in registers.
   Used for compiling the Unix kernel, where strange substitutions are
   done on the assembly output.  */

extern int flag_no_function_cse;

/* Nonzero for -fomit-frame-pointer:
   don't make a frame pointer in simple functions that don't require one.  */

extern int flag_omit_frame_pointer;

/* Nonzero to inhibit use of define_optimization peephole opts.  */

extern int flag_no_peephole;

/* Nonzero allows GCC to optimize sibling and tail recursive calls.  */

extern int flag_optimize_sibling_calls;

/* Nonzero means the front end generally wants `errno' maintained by math
   operations, like built-in SQRT.  */

extern int flag_errno_math;

/* Nonzero means that unsafe floating-point math optimizations are allowed
   for the sake of speed.  IEEE compliance is not guaranteed, and operations
   are allowed to assume that their arguments and results are "normal"
   (e.g., nonnegative for SQRT).  */

extern int flag_unsafe_math_optimizations;

/* Nonzero means that no NaNs or +-Infs are expected.  */

extern int flag_finite_math_only;

/* Zero means that floating-point math operations cannot generate a
   (user-visible) trap.  This is the case, for example, in nonstop
   IEEE 754 arithmetic.  */

extern int flag_trapping_math;

/* Nonzero means disable transformations that assume default floating
   point rounding behavior.  */

extern int flag_rounding_math;

/* 0 means straightforward implementation of complex divide acceptable.
   1 means wide ranges of inputs must work for complex divide.
   2 means C99-like requirements for complex divide (not yet implemented).  */

extern int flag_complex_divide_method;

/* Nonzero means to run loop optimizations twice.  */

extern int flag_rerun_loop_opt;

/* Nonzero means make functions that look like good inline candidates
   go inline.  */

extern int flag_inline_functions;

/* Nonzero for -fkeep-inline-functions: even if we make a function
   go inline everywhere, keep its definition around for debugging
   purposes.  */

extern int flag_keep_inline_functions;

/* Nonzero means that functions declared `inline' will be treated
   as `static'.  Prevents generation of zillions of copies of unused
   static inline functions; instead, `inlines' are written out
   only when actually used.  Used in conjunction with -g.  Also
   does the right thing with #pragma interface.  */

extern int flag_no_inline;

/* Nonzero means that we don't want inlining by virtue of -fno-inline,
   not just because the tree inliner turned us off.  */

extern int flag_really_no_inline;

/* Nonzero if we are only using compiler to check syntax errors.  */

extern int flag_syntax_only;
extern int rtl_dump_and_exit;

/* Nonzero if we are exiting on the first error occurred.  */

extern int flag_fatal_errors;

/* Nonzero means we should save auxiliary info into a .X file.  */

extern int flag_gen_aux_info;

/* Nonzero means make the text shared if supported.  */

extern int flag_shared_data;

/* Controls the activation of SMS modulo scheduling.  */
extern int flag_modulo_sched;

/* flag_schedule_insns means schedule insns within basic blocks (before
   local_alloc).
   flag_schedule_insns_after_reload means schedule insns after
   global_alloc.  */

extern int flag_schedule_insns;
extern int flag_schedule_insns_after_reload;
extern int flag_sched2_use_superblocks;
extern int flag_sched2_use_traces;

/* The following flags have effect only for scheduling before register
   allocation:

   flag_schedule_interblock means schedule insns across basic blocks.
   flag_schedule_speculative means allow speculative motion of non-load insns.
   flag_schedule_speculative_load means allow speculative motion of some
   load insns.
   flag_schedule_speculative_load_dangerous allows speculative motion of more
   load insns.  */

extern int flag_schedule_interblock;
extern int flag_schedule_speculative;
extern int flag_schedule_speculative_load;
extern int flag_schedule_speculative_load_dangerous;

/* The following flags have an effect during scheduling after register
   allocation:   

   sched_stalled_insns means that insns can be moved prematurely from the queue
   of stalled insns into the ready list.

   sched_stalled_insns_dep controls how many recently scheduled cycles will 
   be examined for a dependency on a stalled insn that is candidate for
   premature removal from the queue of stalled insns into the ready list (has 
   an effect only if the flag 'sched_stalled_insns' is set).  */

extern int flag_sched_stalled_insns;
extern int flag_sched_stalled_insns_dep;

/* flag_branch_on_count_reg means try to replace add-1,compare,branch tupple
   by a cheaper branch, on a count register.  */
extern int flag_branch_on_count_reg;

/* This option is set to 1 on -fsingle-precision-constant option which is
   used to convert the floating point constants to single precision 
   constants.  */

extern int flag_single_precision_constant;

/* Nonzero means put things in delayed-branch slots if supported.  */

extern int flag_delayed_branch;

/* Nonzero means suppress output of instruction numbers and line number
   notes in debugging dumps.  */

extern int flag_dump_unnumbered;

/* Nonzero means change certain warnings into errors.
   Usually these are warnings about failure to conform to some standard.  */

extern int flag_pedantic_errors;

/* Nonzero means generate position-independent code.  1 vs 2 for a 
   target-dependent "small" or "large" mode.  */

extern int flag_pic;

/* Nonzero if we are compiling position independent code for executable.
   1 vs 2 for a target-dependent "small" or "large" mode.  */
      
extern int flag_pie;
      
/* Nonzero if we are compiling code for a shared library, zero for
   executable.  */

extern int flag_shlib;

/* Nonzero means generate extra code for exception handling and enable
   exception handling.  */

extern int flag_exceptions;

/* Nonzero means generate frame unwind info table when supported.  */

extern int flag_unwind_tables;

/* Nonzero means generate frame unwind info table exact at each insn boundary.  */

extern int flag_asynchronous_unwind_tables;

/* Nonzero means don't place uninitialized global data in common storage
   by default.  */

extern int flag_no_common;

/* -finhibit-size-directive inhibits output of .size for ELF.
   This is used only for compiling crtstuff.c,
   and it may be extended to other effects
   needed for crtstuff.c on other systems.  */
extern int flag_inhibit_size_directive;

/* Nonzero means place each function into its own section on those platforms
   which support arbitrary section names and unlimited numbers of sections.  */

extern int flag_function_sections;

/* ... and similar for data.  */
 
extern int flag_data_sections;

/* -fverbose-asm causes extra commentary information to be produced in
   the generated assembly code (to make it more readable).  This option
   is generally only of use to those who actually need to read the
   generated assembly code (perhaps while debugging the compiler itself).
   -fno-verbose-asm, the default, causes the extra information
   to not be added and is useful when comparing two assembler files.  */

extern int flag_verbose_asm;

/* -dA causes debug information to be produced in
   the generated assembly code (to make it more readable).  This option
   is generally only of use to those who actually need to read the
   generated assembly code (perhaps while debugging the compiler itself).
   Currently, this switch is only used by dwarfout.c; however, it is intended
   to be a catchall for printing debug information in the assembler file.  */

extern int flag_debug_asm;

extern int flag_dump_rtl_in_asm;

/* Greater than zero if user symbols are prepended by a leading underscore
   in generated assembly code.  */
extern int flag_leading_underscore;

/* Tag all structures with __attribute__(packed) */
extern int flag_pack_struct;

/* This flag is only tested if alias checking is enabled.
   0 if pointer arguments may alias each other.  True in C.
   1 if pointer arguments may not alias each other but may alias
   global variables.
   2 if pointer arguments may not alias each other and may not
   alias global variables.  True in Fortran.
   The value is ignored if flag_alias_check is 0.  */
extern int flag_argument_noalias;

/* Nonzero if we should do (language-dependent) alias analysis.
   Typically, this analysis will assume that expressions of certain
   types do not alias expressions of certain other types.  Only used
   if alias analysis (in general) is enabled.  */
extern int flag_strict_aliasing;

/* Emit code to probe the stack, to help detect stack overflow; also
   may cause large objects to be allocated dynamically.  */
extern int flag_stack_check;

/* Do the full regmove optimization pass.  */
extern int flag_regmove;

/* Instrument functions with calls at entry and exit, for profiling.  */
extern int flag_instrument_function_entry_exit;

/* Perform a peephole pass before sched2.  */
extern int flag_peephole2;

/* Try to guess branch probabilities.  */
extern int flag_guess_branch_prob;

/* -fcheck-bounds causes gcc to generate array bounds checks.
   For C, C++ and ObjC: defaults off.
   For Java: defaults to on.
   For Fortran: defaults to off.  */
extern int flag_bounds_check;

/* This will attempt to merge constant section constants, if 1 only
   string constants and constants from constant pool, if 2 also constant
   variables.  */
extern int flag_merge_constants;

/* If one, renumber instruction UIDs to reduce the number of
   unused UIDs if there are a lot of instructions.  If greater than
   one, unconditionally renumber instruction UIDs.  */
extern int flag_renumber_insns;
\f
/* Other basic status info about current function.  */

/* Nonzero means current function must be given a frame pointer.
   Set in stmt.c if anything is allocated on the stack there.
   Set in reload1.c if anything is allocated on the stack there.  */

extern int frame_pointer_needed;

/* Nonzero if the generated code should trap on signed overflow
   for PLUS / SUB / MULT.  */
extern int flag_trapv;

/* Nonzero if the signed arithmetic overflow should wrap around.  */
extern int flag_wrapv;

/* Nonzero if subexpressions must be evaluated from left-to-right.  */
extern int flag_evaluation_order;

/* Value of the -G xx switch, and whether it was passed or not.  */
extern unsigned HOST_WIDE_INT g_switch_value;
extern bool g_switch_set;

/* Values of the -falign-* flags: how much to align labels in code. 
   0 means `use default', 1 means `don't align'.  
   For each variable, there is an _log variant which is the power
   of two not less than the variable, for .align output.  */

extern int align_loops;
extern int align_loops_log;
extern int align_loops_max_skip;
extern int align_jumps;
extern int align_jumps_log;
extern int align_jumps_max_skip;
extern int align_labels;
extern int align_labels_log;
extern int align_labels_max_skip;
extern int align_functions;
extern int align_functions_log;

/* Like align_functions_log above, but used by front-ends to force the
   minimum function alignment.  Zero means no alignment is forced.  */
extern int force_align_functions_log;

/* Nonzero if we dump in VCG format, not plain text.  */
extern int dump_for_graph;

/* Selection of the graph form.  */
enum graph_dump_types
{
  no_graph = 0,
  vcg
};
extern enum graph_dump_types graph_dump_format;

/* Nonzero means ignore `#ident' directives.  0 means handle them.
   On SVR4 targets, it also controls whether or not to emit a
   string identifying the compiler.  */

extern int flag_no_ident;

/* Nonzero means perform global CSE.  */

extern int flag_gcse;

/* Nonzero if we want to perform enhanced load motion during gcse.  */

extern int flag_gcse_lm;

/* Nonzero if we want to perform store motion after gcse.  */

extern int flag_gcse_sm;

/* Nonzero if we want to perform redundant load-after-store elimination
   in gcse.  */

extern int flag_gcse_las;

/* Nonzero if we want to perform global redundancy elimination after
   register allocation.  */

extern int flag_gcse_after_reload;

/* Nonzero if value histograms should be used to optimize code.  */
extern int flag_value_profile_transformations;

/* Perform branch target register optimization before prologue / epilogue
   threading.  */

extern int flag_branch_target_load_optimize;

/* Perform branch target register optimization after prologue / epilogue
   threading and jump2.  */

extern int flag_branch_target_load_optimize2;

/* For the bt-load pass, nonzero means don't re-use branch target registers 
   in any basic block.  */
extern int flag_btr_bb_exclusive;


/* Nonzero means we should do dwarf2 duplicate elimination.  */

extern int flag_eliminate_dwarf2_dups;

/* Nonzero means we should do unused type elimination.  */

extern int flag_eliminate_unused_debug_types;

/* Nonzero means to collect statistics which might be expensive
   and to print them when we are done.  */
extern int flag_detailed_statistics;

/* Nonzero means enable synchronous exceptions for non-call instructions.  */
extern int flag_non_call_exceptions;

/* Nonzero means enable mudflap bounds-checking transforms;
   >1 means also to include multithreading locks.  */
extern int flag_mudflap;
extern int flag_mudflap_threads;
extern int flag_mudflap_ignore_reads;

/* Enable SSA-PRE on trees.  */
extern int flag_tree_pre;

/* Enable SSA-CCP on trees.  */
extern int flag_tree_ccp;

/* Enable SSA-DCE on trees.  */
extern int flag_tree_dce;

/* Enable SSA->normal pass memory location coalescing.  */
extern int flag_tree_combine_temps;

/* Enable SSA->normal pass expression replacement.  */
extern int flag_tree_ter;

/* Enable SSA_>normal live range splitting.  */
extern int flag_tree_live_range_split;

/* Enable dominator optimizations.  */
extern int flag_tree_dom;

/* Enable loop header copying on tree-ssa.  */
extern int flag_tree_ch;

/* Enable dead store and redundant load elimination */
extern int flag_tree_dse;

/* Enable scalar replacement of aggregates.  */
extern int flag_tree_sra;

/* Enable copy rename optimization.  */
extern int flag_tree_copyrename;

/* Enable points-to analysis on trees.  */
enum pta_type
  {
    PTA_NONE,
    PTA_ANDERSEN
  };
extern enum pta_type flag_tree_points_to;

/* Nonzero means put zero initialized data in the bss section.  */
extern int flag_zero_initialized_in_bss;

/* Nonzero means disable transformations observable by signaling NaNs.  */
extern int flag_signaling_nans;

extern int flag_unit_at_a_time;

extern int flag_web;

/* Nonzero means that we defer emitting functions until they are actually
   used.  */
extern int flag_remove_unreachable_functions;

/* Nonzero if we should track variables.  */
extern int flag_var_tracking;

/* A string that's used when a random name is required.  NULL means
   to make it really random.  */

extern const char *flag_random_seed;

/*  The version of the C++ ABI in use.  The following values are
    allowed:

    0: The version of the ABI believed most conformant with the 
       C++ ABI specification.  This ABI may change as bugs are
       discovered and fixed.  Therefore, 0 will not necessarily
       indicate the same ABI in different versions of G++.

    1: The version of the ABI first used in G++ 3.2.

    Additional positive integers will be assigned as new versions of
    the ABI become the default version of the ABI.  */

extern int flag_abi_version;

/* Returns TRUE if generated code should match ABI version N or
   greater is in use.  */

#define abi_version_at_least(N) \
  (flag_abi_version == 0 || flag_abi_version >= (N))

/* True if the given mode has a NaN representation and the treatment of
   NaN operands is important.  Certain optimizations, such as folding
   x * 0 into x, are not correct for NaN operands, and are normally
   disabled for modes with NaNs.  The user can ask for them to be
   done anyway using the -funsafe-math-optimizations switch.  */
#define HONOR_NANS(MODE) \
  (MODE_HAS_NANS (MODE) && !flag_finite_math_only)

/* Like HONOR_NANs, but true if we honor signaling NaNs (or sNaNs).  */
#define HONOR_SNANS(MODE) (flag_signaling_nans && HONOR_NANS (MODE))

/* As for HONOR_NANS, but true if the mode can represent infinity and
   the treatment of infinite values is important.  */
#define HONOR_INFINITIES(MODE) \
  (MODE_HAS_INFINITIES (MODE) && !flag_finite_math_only)

/* Like HONOR_NANS, but true if the given mode distinguishes between
   positive and negative zero, and the sign of zero is important.  */
#define HONOR_SIGNED_ZEROS(MODE) \
  (MODE_HAS_SIGNED_ZEROS (MODE) && !flag_unsafe_math_optimizations)

/* Like HONOR_NANS, but true if given mode supports sign-dependent rounding,
   and the rounding mode is important.  */
#define HONOR_SIGN_DEPENDENT_ROUNDING(MODE) \
  (MODE_HAS_SIGN_DEPENDENT_ROUNDING (MODE) && flag_rounding_math)

#endif /* ! GCC_FLAGS_H */