[pf3gnuchains/gcc-fork.git] / gcc / expr.c

/* Convert tree expression to rtl instructions, for GNU compiler.
   Copyright (C) 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.

GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING.  If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.  */

#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "machmode.h"
#include "real.h"
#include "rtl.h"
#include "tree.h"
#include "flags.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "except.h"
#include "function.h"
#include "insn-config.h"
#include "insn-attr.h"
/* Include expr.h after insn-config.h so we get HAVE_conditional_move.  */
#include "expr.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
#include "reload.h"
#include "output.h"
#include "typeclass.h"
#include "toplev.h"
#include "ggc.h"
#include "langhooks.h"
#include "intl.h"
#include "tm_p.h"
#include "target.h"

/* Decide whether a function's arguments should be processed
   from first to last or from last to first.

   They should if the stack and args grow in opposite directions, but
   only if we have push insns.  */

#ifdef PUSH_ROUNDING

#ifndef PUSH_ARGS_REVERSED
#if defined (STACK_GROWS_DOWNWARD) != defined (ARGS_GROW_DOWNWARD)
#define PUSH_ARGS_REVERSED      /* If it's last to first.  */
#endif
#endif

#endif

#ifndef STACK_PUSH_CODE
#ifdef STACK_GROWS_DOWNWARD
#define STACK_PUSH_CODE PRE_DEC
#else
#define STACK_PUSH_CODE PRE_INC
#endif
#endif

/* Convert defined/undefined to boolean.  */
#ifdef TARGET_MEM_FUNCTIONS
#undef TARGET_MEM_FUNCTIONS
#define TARGET_MEM_FUNCTIONS 1
#else
#define TARGET_MEM_FUNCTIONS 0
#endif


/* If this is nonzero, we do not bother generating VOLATILE
   around volatile memory references, and we are willing to
   output indirect addresses.  If cse is to follow, we reject
   indirect addresses so a useful potential cse is generated;
   if it is used only once, instruction combination will produce
   the same indirect address eventually.  */
int cse_not_expected;

/* Chain of pending expressions for PLACEHOLDER_EXPR to replace.  */
tree placeholder_list = 0;

/* This structure is used by move_by_pieces to describe the move to
   be performed.  */
struct move_by_pieces
{
  rtx to;
  rtx to_addr;
  int autinc_to;
  int explicit_inc_to;
  rtx from;
  rtx from_addr;
  int autinc_from;
  int explicit_inc_from;
  unsigned HOST_WIDE_INT len;
  HOST_WIDE_INT offset;
  int reverse;
};

/* This structure is used by store_by_pieces to describe the clear to
   be performed.  */

struct store_by_pieces
{
  rtx to;
  rtx to_addr;
  int autinc_to;
  int explicit_inc_to;
  unsigned HOST_WIDE_INT len;
  HOST_WIDE_INT offset;
  rtx (*constfun) (void *, HOST_WIDE_INT, enum machine_mode);
  void *constfundata;
  int reverse;
};

static rtx enqueue_insn (rtx, rtx);
static unsigned HOST_WIDE_INT move_by_pieces_ninsns (unsigned HOST_WIDE_INT,
                                                     unsigned int);
static void move_by_pieces_1 (rtx (*) (rtx, ...), enum machine_mode,
                              struct move_by_pieces *);
static bool block_move_libcall_safe_for_call_parm (void);
static bool emit_block_move_via_movstr (rtx, rtx, rtx, unsigned);
static rtx emit_block_move_via_libcall (rtx, rtx, rtx);
static tree emit_block_move_libcall_fn (int);
static void emit_block_move_via_loop (rtx, rtx, rtx, unsigned);
static rtx clear_by_pieces_1 (void *, HOST_WIDE_INT, enum machine_mode);
static void clear_by_pieces (rtx, unsigned HOST_WIDE_INT, unsigned int);
static void store_by_pieces_1 (struct store_by_pieces *, unsigned int);
static void store_by_pieces_2 (rtx (*) (rtx, ...), enum machine_mode,
                               struct store_by_pieces *);
static bool clear_storage_via_clrstr (rtx, rtx, unsigned);
static rtx clear_storage_via_libcall (rtx, rtx);
static tree clear_storage_libcall_fn (int);
static rtx compress_float_constant (rtx, rtx);
static rtx get_subtarget (rtx);
static int is_zeros_p (tree);
static void store_constructor_field (rtx, unsigned HOST_WIDE_INT,
                                     HOST_WIDE_INT, enum machine_mode,
                                     tree, tree, int, int);
static void store_constructor (tree, rtx, int, HOST_WIDE_INT);
static rtx store_field (rtx, HOST_WIDE_INT, HOST_WIDE_INT, enum machine_mode,
                        tree, enum machine_mode, int, tree, int);
static rtx var_rtx (tree);

static unsigned HOST_WIDE_INT highest_pow2_factor (tree);
static unsigned HOST_WIDE_INT highest_pow2_factor_for_type (tree, tree);

static int is_aligning_offset (tree, tree);
static rtx expand_increment (tree, int, int);
static void expand_operands (tree, tree, rtx, rtx*, rtx*,
                             enum expand_modifier);
static rtx do_store_flag (tree, rtx, enum machine_mode, int);
#ifdef PUSH_ROUNDING
static void emit_single_push_insn (enum machine_mode, rtx, tree);
#endif
static void do_tablejump (rtx, enum machine_mode, rtx, rtx, rtx);
static rtx const_vector_from_tree (tree);

/* Record for each mode whether we can move a register directly to or
   from an object of that mode in memory.  If we can't, we won't try
   to use that mode directly when accessing a field of that mode.  */

static char direct_load[NUM_MACHINE_MODES];
static char direct_store[NUM_MACHINE_MODES];

/* Record for each mode whether we can float-extend from memory.  */

static bool float_extend_from_mem[NUM_MACHINE_MODES][NUM_MACHINE_MODES];

/* This macro is used to determine whether move_by_pieces should be called
   to perform a structure copy.  */
#ifndef MOVE_BY_PIECES_P
#define MOVE_BY_PIECES_P(SIZE, ALIGN) \
  (move_by_pieces_ninsns (SIZE, ALIGN) < (unsigned int) MOVE_RATIO)
#endif

/* This macro is used to determine whether clear_by_pieces should be
   called to clear storage.  */
#ifndef CLEAR_BY_PIECES_P
#define CLEAR_BY_PIECES_P(SIZE, ALIGN) \
  (move_by_pieces_ninsns (SIZE, ALIGN) < (unsigned int) CLEAR_RATIO)
#endif

/* This macro is used to determine whether store_by_pieces should be
   called to "memset" storage with byte values other than zero, or
   to "memcpy" storage when the source is a constant string.  */
#ifndef STORE_BY_PIECES_P
#define STORE_BY_PIECES_P(SIZE, ALIGN)  MOVE_BY_PIECES_P (SIZE, ALIGN)
#endif

/* This array records the insn_code of insns to perform block moves.  */
enum insn_code movstr_optab[NUM_MACHINE_MODES];

/* This array records the insn_code of insns to perform block clears.  */
enum insn_code clrstr_optab[NUM_MACHINE_MODES];

/* These arrays record the insn_code of two different kinds of insns
   to perform block compares.  */
enum insn_code cmpstr_optab[NUM_MACHINE_MODES];
enum insn_code cmpmem_optab[NUM_MACHINE_MODES];

/* Stack of EXPR_WITH_FILE_LOCATION nested expressions.  */
struct file_stack *expr_wfl_stack;

/* SLOW_UNALIGNED_ACCESS is nonzero if unaligned accesses are very slow.  */

#ifndef SLOW_UNALIGNED_ACCESS
#define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) STRICT_ALIGNMENT
#endif
\f
/* This is run once per compilation to set up which modes can be used
   directly in memory and to initialize the block move optab.  */

void
init_expr_once (void)
{
  rtx insn, pat;
  enum machine_mode mode;
  int num_clobbers;
  rtx mem, mem1;
  rtx reg;

  /* Try indexing by frame ptr and try by stack ptr.
     It is known that on the Convex the stack ptr isn't a valid index.
     With luck, one or the other is valid on any machine.  */
  mem = gen_rtx_MEM (VOIDmode, stack_pointer_rtx);
  mem1 = gen_rtx_MEM (VOIDmode, frame_pointer_rtx);

  /* A scratch register we can modify in-place below to avoid
     useless RTL allocations.  */
  reg = gen_rtx_REG (VOIDmode, -1);

  insn = rtx_alloc (INSN);
  pat = gen_rtx_SET (0, NULL_RTX, NULL_RTX);
  PATTERN (insn) = pat;

  for (mode = VOIDmode; (int) mode < NUM_MACHINE_MODES;
       mode = (enum machine_mode) ((int) mode + 1))
    {
      int regno;

      direct_load[(int) mode] = direct_store[(int) mode] = 0;
      PUT_MODE (mem, mode);
      PUT_MODE (mem1, mode);
      PUT_MODE (reg, mode);

      /* See if there is some register that can be used in this mode and
         directly loaded or stored from memory.  */

      if (mode != VOIDmode && mode != BLKmode)
        for (regno = 0; regno < FIRST_PSEUDO_REGISTER
             && (direct_load[(int) mode] == 0 || direct_store[(int) mode] == 0);
             regno++)
          {
            if (! HARD_REGNO_MODE_OK (regno, mode))
              continue;

            REGNO (reg) = regno;

            SET_SRC (pat) = mem;
            SET_DEST (pat) = reg;
            if (recog (pat, insn, &num_clobbers) >= 0)
              direct_load[(int) mode] = 1;

            SET_SRC (pat) = mem1;
            SET_DEST (pat) = reg;
            if (recog (pat, insn, &num_clobbers) >= 0)
              direct_load[(int) mode] = 1;

            SET_SRC (pat) = reg;
            SET_DEST (pat) = mem;
            if (recog (pat, insn, &num_clobbers) >= 0)
              direct_store[(int) mode] = 1;

            SET_SRC (pat) = reg;
            SET_DEST (pat) = mem1;
            if (recog (pat, insn, &num_clobbers) >= 0)
              direct_store[(int) mode] = 1;
          }
    }

  mem = gen_rtx_MEM (VOIDmode, gen_rtx_raw_REG (Pmode, 10000));

  for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode;
       mode = GET_MODE_WIDER_MODE (mode))
    {
      enum machine_mode srcmode;
      for (srcmode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); srcmode != mode;
           srcmode = GET_MODE_WIDER_MODE (srcmode))
        {
          enum insn_code ic;

          ic = can_extend_p (mode, srcmode, 0);
          if (ic == CODE_FOR_nothing)
            continue;

          PUT_MODE (mem, srcmode);

          if ((*insn_data[ic].operand[1].predicate) (mem, srcmode))
            float_extend_from_mem[mode][srcmode] = true;
        }
    }
}

/* This is run at the start of compiling a function.  */

void
init_expr (void)
{
  cfun->expr = ggc_alloc_cleared (sizeof (struct expr_status));
}

/* Small sanity check that the queue is empty at the end of a function.  */

void
finish_expr_for_function (void)
{
  if (pending_chain)
    abort ();
}
\f
/* Manage the queue of increment instructions to be output
   for POSTINCREMENT_EXPR expressions, etc.  */

/* Queue up to increment (or change) VAR later.  BODY says how:
   BODY should be the same thing you would pass to emit_insn
   to increment right away.  It will go to emit_insn later on.

   The value is a QUEUED expression to be used in place of VAR
   where you want to guarantee the pre-incrementation value of VAR.  */

static rtx
enqueue_insn (rtx var, rtx body)
{
  pending_chain = gen_rtx_QUEUED (GET_MODE (var), var, NULL_RTX, NULL_RTX,
                                  body, pending_chain);
  return pending_chain;
}

/* Use protect_from_queue to convert a QUEUED expression
   into something that you can put immediately into an instruction.
   If the queued incrementation has not happened yet,
   protect_from_queue returns the variable itself.
   If the incrementation has happened, protect_from_queue returns a temp
   that contains a copy of the old value of the variable.

   Any time an rtx which might possibly be a QUEUED is to be put
   into an instruction, it must be passed through protect_from_queue first.
   QUEUED expressions are not meaningful in instructions.

   Do not pass a value through protect_from_queue and then hold
   on to it for a while before putting it in an instruction!
   If the queue is flushed in between, incorrect code will result.  */

rtx
protect_from_queue (rtx x, int modify)
{
  RTX_CODE code = GET_CODE (x);

#if 0  /* A QUEUED can hang around after the queue is forced out.  */
  /* Shortcut for most common case.  */
  if (pending_chain == 0)
    return x;
#endif

  if (code != QUEUED)
    {
      /* A special hack for read access to (MEM (QUEUED ...)) to facilitate
         use of autoincrement.  Make a copy of the contents of the memory
         location rather than a copy of the address, but not if the value is
         of mode BLKmode.  Don't modify X in place since it might be
         shared.  */
      if (code == MEM && GET_MODE (x) != BLKmode
          && GET_CODE (XEXP (x, 0)) == QUEUED && !modify)
        {
          rtx y = XEXP (x, 0);
          rtx new = replace_equiv_address_nv (x, QUEUED_VAR (y));

          if (QUEUED_INSN (y))
            {
              rtx temp = gen_reg_rtx (GET_MODE (x));

              emit_insn_before (gen_move_insn (temp, new),
                                QUEUED_INSN (y));
              return temp;
            }

          /* Copy the address into a pseudo, so that the returned value
             remains correct across calls to emit_queue.  */
          return replace_equiv_address (new, copy_to_reg (XEXP (new, 0)));
        }

      /* Otherwise, recursively protect the subexpressions of all
         the kinds of rtx's that can contain a QUEUED.  */
      if (code == MEM)
        {
          rtx tem = protect_from_queue (XEXP (x, 0), 0);
          if (tem != XEXP (x, 0))
            {
              x = copy_rtx (x);
              XEXP (x, 0) = tem;
            }
        }
      else if (code == PLUS || code == MULT)
        {
          rtx new0 = protect_from_queue (XEXP (x, 0), 0);
          rtx new1 = protect_from_queue (XEXP (x, 1), 0);
          if (new0 != XEXP (x, 0) || new1 != XEXP (x, 1))
            {
              x = copy_rtx (x);
              XEXP (x, 0) = new0;
              XEXP (x, 1) = new1;
            }
        }
      return x;
    }
  /* If the increment has not happened, use the variable itself.  Copy it
     into a new pseudo so that the value remains correct across calls to
     emit_queue.  */
  if (QUEUED_INSN (x) == 0)
    return copy_to_reg (QUEUED_VAR (x));
  /* If the increment has happened and a pre-increment copy exists,
     use that copy.  */
  if (QUEUED_COPY (x) != 0)
    return QUEUED_COPY (x);
  /* The increment has happened but we haven't set up a pre-increment copy.
     Set one up now, and use it.  */
  QUEUED_COPY (x) = gen_reg_rtx (GET_MODE (QUEUED_VAR (x)));
  emit_insn_before (gen_move_insn (QUEUED_COPY (x), QUEUED_VAR (x)),
                    QUEUED_INSN (x));
  return QUEUED_COPY (x);
}

/* Return nonzero if X contains a QUEUED expression:
   if it contains anything that will be altered by a queued increment.
   We handle only combinations of MEM, PLUS, MINUS and MULT operators
   since memory addresses generally contain only those.  */

int
queued_subexp_p (rtx x)
{
  enum rtx_code code = GET_CODE (x);
  switch (code)
    {
    case QUEUED:
      return 1;
    case MEM:
      return queued_subexp_p (XEXP (x, 0));
    case MULT:
    case PLUS:
    case MINUS:
      return (queued_subexp_p (XEXP (x, 0))
              || queued_subexp_p (XEXP (x, 1)));
    default:
      return 0;
    }
}

/* Perform all the pending incrementations.  */

void
emit_queue (void)
{
  rtx p;
  while ((p = pending_chain))
    {
      rtx body = QUEUED_BODY (p);

      switch (GET_CODE (body))
        {
        case INSN:
        case JUMP_INSN:
        case CALL_INSN:
        case CODE_LABEL:
        case BARRIER:
        case NOTE:
          QUEUED_INSN (p) = body;
          emit_insn (body);
          break;

#ifdef ENABLE_CHECKING
        case SEQUENCE:
          abort ();
          break;
#endif

        default:
          QUEUED_INSN (p) = emit_insn (body);
          break;
        }

      pending_chain = QUEUED_NEXT (p);
    }
}
\f
/* Copy data from FROM to TO, where the machine modes are not the same.
   Both modes may be integer, or both may be floating.
   UNSIGNEDP should be nonzero if FROM is an unsigned type.
   This causes zero-extension instead of sign-extension.  */

void
convert_move (rtx to, rtx from, int unsignedp)
{
  enum machine_mode to_mode = GET_MODE (to);
  enum machine_mode from_mode = GET_MODE (from);
  int to_real = GET_MODE_CLASS (to_mode) == MODE_FLOAT;
  int from_real = GET_MODE_CLASS (from_mode) == MODE_FLOAT;
  enum insn_code code;
  rtx libcall;

  /* rtx code for making an equivalent value.  */
  enum rtx_code equiv_code = (unsignedp < 0 ? UNKNOWN
                              : (unsignedp ? ZERO_EXTEND : SIGN_EXTEND));

  to = protect_from_queue (to, 1);
  from = protect_from_queue (from, 0);

  if (to_real != from_real)
    abort ();

  /* If FROM is a SUBREG that indicates that we have already done at least
     the required extension, strip it.  We don't handle such SUBREGs as
     TO here.  */

  if (GET_CODE (from) == SUBREG && SUBREG_PROMOTED_VAR_P (from)
      && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (from)))
          >= GET_MODE_SIZE (to_mode))
      && SUBREG_PROMOTED_UNSIGNED_P (from) == unsignedp)
    from = gen_lowpart (to_mode, from), from_mode = to_mode;

  if (GET_CODE (to) == SUBREG && SUBREG_PROMOTED_VAR_P (to))
    abort ();

  if (to_mode == from_mode
      || (from_mode == VOIDmode && CONSTANT_P (from)))
    {
      emit_move_insn (to, from);
      return;
    }

  if (VECTOR_MODE_P (to_mode) || VECTOR_MODE_P (from_mode))
    {
      if (GET_MODE_BITSIZE (from_mode) != GET_MODE_BITSIZE (to_mode))
        abort ();

      if (VECTOR_MODE_P (to_mode))
        from = simplify_gen_subreg (to_mode, from, GET_MODE (from), 0);
      else
        to = simplify_gen_subreg (from_mode, to, GET_MODE (to), 0);

      emit_move_insn (to, from);
      return;
    }

  if (GET_CODE (to) == CONCAT && GET_CODE (from) == CONCAT)
    {
      convert_move (XEXP (to, 0), XEXP (from, 0), unsignedp);
      convert_move (XEXP (to, 1), XEXP (from, 1), unsignedp);
      return;
    }

  if (to_real)
    {
      rtx value, insns;
      convert_optab tab;

      if (GET_MODE_PRECISION (from_mode) < GET_MODE_PRECISION (to_mode))
        tab = sext_optab;
      else if (GET_MODE_PRECISION (from_mode) > GET_MODE_PRECISION (to_mode))
        tab = trunc_optab;
      else
        abort ();

      /* Try converting directly if the insn is supported.  */

      code = tab->handlers[to_mode][from_mode].insn_code;
      if (code != CODE_FOR_nothing)
        {
          emit_unop_insn (code, to, from,
                          tab == sext_optab ? FLOAT_EXTEND : FLOAT_TRUNCATE);
          return;
        }

      /* Otherwise use a libcall.  */
      libcall = tab->handlers[to_mode][from_mode].libfunc;

      if (!libcall)
        /* This conversion is not implemented yet.  */
        abort ();

      start_sequence ();
      value = emit_library_call_value (libcall, NULL_RTX, LCT_CONST, to_mode,
                                       1, from, from_mode);
      insns = get_insns ();
      end_sequence ();
      emit_libcall_block (insns, to, value,
                          tab == trunc_optab ? gen_rtx_FLOAT_TRUNCATE (to_mode,
                                                                       from)
                          : gen_rtx_FLOAT_EXTEND (to_mode, from));
      return;
    }

  /* Handle pointer conversion.  */                     /* SPEE 900220.  */
  /* Targets are expected to provide conversion insns between PxImode and
     xImode for all MODE_PARTIAL_INT modes they use, but no others.  */
  if (GET_MODE_CLASS (to_mode) == MODE_PARTIAL_INT)
    {
      enum machine_mode full_mode
        = smallest_mode_for_size (GET_MODE_BITSIZE (to_mode), MODE_INT);

      if (trunc_optab->handlers[to_mode][full_mode].insn_code
          == CODE_FOR_nothing)
        abort ();

      if (full_mode != from_mode)
        from = convert_to_mode (full_mode, from, unsignedp);
      emit_unop_insn (trunc_optab->handlers[to_mode][full_mode].insn_code,
                      to, from, UNKNOWN);
      return;
    }
  if (GET_MODE_CLASS (from_mode) == MODE_PARTIAL_INT)
    {
      enum machine_mode full_mode
        = smallest_mode_for_size (GET_MODE_BITSIZE (from_mode), MODE_INT);

      if (sext_optab->handlers[full_mode][from_mode].insn_code
          == CODE_FOR_nothing)
        abort ();

      emit_unop_insn (sext_optab->handlers[full_mode][from_mode].insn_code,
                      to, from, UNKNOWN);
      if (to_mode == full_mode)
        return;

      /* else proceed to integer conversions below.  */
      from_mode = full_mode;
    }

  /* Now both modes are integers.  */

  /* Handle expanding beyond a word.  */
  if (GET_MODE_BITSIZE (from_mode) < GET_MODE_BITSIZE (to_mode)
      && GET_MODE_BITSIZE (to_mode) > BITS_PER_WORD)
    {
      rtx insns;
      rtx lowpart;
      rtx fill_value;
      rtx lowfrom;
      int i;
      enum machine_mode lowpart_mode;
      int nwords = CEIL (GET_MODE_SIZE (to_mode), UNITS_PER_WORD);

      /* Try converting directly if the insn is supported.  */
      if ((code = can_extend_p (to_mode, from_mode, unsignedp))
          != CODE_FOR_nothing)
        {
          /* If FROM is a SUBREG, put it into a register.  Do this
             so that we always generate the same set of insns for
             better cse'ing; if an intermediate assignment occurred,
             we won't be doing the operation directly on the SUBREG.  */
          if (optimize > 0 && GET_CODE (from) == SUBREG)
            from = force_reg (from_mode, from);
          emit_unop_insn (code, to, from, equiv_code);
          return;
        }
      /* Next, try converting via full word.  */
      else if (GET_MODE_BITSIZE (from_mode) < BITS_PER_WORD
               && ((code = can_extend_p (to_mode, word_mode, unsignedp))
                   != CODE_FOR_nothing))
        {
          if (GET_CODE (to) == REG)
            emit_insn (gen_rtx_CLOBBER (VOIDmode, to));
          convert_move (gen_lowpart (word_mode, to), from, unsignedp);
          emit_unop_insn (code, to,
                          gen_lowpart (word_mode, to), equiv_code);
          return;
        }

      /* No special multiword conversion insn; do it by hand.  */
      start_sequence ();

      /* Since we will turn this into a no conflict block, we must ensure
         that the source does not overlap the target.  */

      if (reg_overlap_mentioned_p (to, from))
        from = force_reg (from_mode, from);

      /* Get a copy of FROM widened to a word, if necessary.  */
      if (GET_MODE_BITSIZE (from_mode) < BITS_PER_WORD)
        lowpart_mode = word_mode;
      else
        lowpart_mode = from_mode;

      lowfrom = convert_to_mode (lowpart_mode, from, unsignedp);

      lowpart = gen_lowpart (lowpart_mode, to);
      emit_move_insn (lowpart, lowfrom);

      /* Compute the value to put in each remaining word.  */
      if (unsignedp)
        fill_value = const0_rtx;
      else
        {
#ifdef HAVE_slt
          if (HAVE_slt
              && insn_data[(int) CODE_FOR_slt].operand[0].mode == word_mode
              && STORE_FLAG_VALUE == -1)
            {
              emit_cmp_insn (lowfrom, const0_rtx, NE, NULL_RTX,
                             lowpart_mode, 0);
              fill_value = gen_reg_rtx (word_mode);
              emit_insn (gen_slt (fill_value));
            }
          else
#endif
            {
              fill_value
                = expand_shift (RSHIFT_EXPR, lowpart_mode, lowfrom,
                                size_int (GET_MODE_BITSIZE (lowpart_mode) - 1),
                                NULL_RTX, 0);
              fill_value = convert_to_mode (word_mode, fill_value, 1);
            }
        }

      /* Fill the remaining words.  */
      for (i = GET_MODE_SIZE (lowpart_mode) / UNITS_PER_WORD; i < nwords; i++)
        {
          int index = (WORDS_BIG_ENDIAN ? nwords - i - 1 : i);
          rtx subword = operand_subword (to, index, 1, to_mode);

          if (subword == 0)
            abort ();

          if (fill_value != subword)
            emit_move_insn (subword, fill_value);
        }

      insns = get_insns ();
      end_sequence ();

      emit_no_conflict_block (insns, to, from, NULL_RTX,
                              gen_rtx_fmt_e (equiv_code, to_mode, copy_rtx (from)));
      return;
    }

  /* Truncating multi-word to a word or less.  */
  if (GET_MODE_BITSIZE (from_mode) > BITS_PER_WORD
      && GET_MODE_BITSIZE (to_mode) <= BITS_PER_WORD)
    {
      if (!((GET_CODE (from) == MEM
             && ! MEM_VOLATILE_P (from)
             && direct_load[(int) to_mode]
             && ! mode_dependent_address_p (XEXP (from, 0)))
            || GET_CODE (from) == REG
            || GET_CODE (from) == SUBREG))
        from = force_reg (from_mode, from);
      convert_move (to, gen_lowpart (word_mode, from), 0);
      return;
    }

  /* Now follow all the conversions between integers
     no more than a word long.  */

  /* For truncation, usually we can just refer to FROM in a narrower mode.  */
  if (GET_MODE_BITSIZE (to_mode) < GET_MODE_BITSIZE (from_mode)
      && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (to_mode),
                                GET_MODE_BITSIZE (from_mode)))
    {
      if (!((GET_CODE (from) == MEM
             && ! MEM_VOLATILE_P (from)
             && direct_load[(int) to_mode]
             && ! mode_dependent_address_p (XEXP (from, 0)))
            || GET_CODE (from) == REG
            || GET_CODE (from) == SUBREG))
        from = force_reg (from_mode, from);
      if (GET_CODE (from) == REG && REGNO (from) < FIRST_PSEUDO_REGISTER
          && ! HARD_REGNO_MODE_OK (REGNO (from), to_mode))
        from = copy_to_reg (from);
      emit_move_insn (to, gen_lowpart (to_mode, from));
      return;
    }

  /* Handle extension.  */
  if (GET_MODE_BITSIZE (to_mode) > GET_MODE_BITSIZE (from_mode))
    {
      /* Convert directly if that works.  */
      if ((code = can_extend_p (to_mode, from_mode, unsignedp))
          != CODE_FOR_nothing)
        {
          if (flag_force_mem)
            from = force_not_mem (from);

          emit_unop_insn (code, to, from, equiv_code);
          return;
        }
      else
        {
          enum machine_mode intermediate;
          rtx tmp;
          tree shift_amount;

          /* Search for a mode to convert via.  */
          for (intermediate = from_mode; intermediate != VOIDmode;
               intermediate = GET_MODE_WIDER_MODE (intermediate))
            if (((can_extend_p (to_mode, intermediate, unsignedp)
                  != CODE_FOR_nothing)
                 || (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (intermediate)
                     && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (to_mode),
                                               GET_MODE_BITSIZE (intermediate))))
                && (can_extend_p (intermediate, from_mode, unsignedp)
                    != CODE_FOR_nothing))
              {
                convert_move (to, convert_to_mode (intermediate, from,
                                                   unsignedp), unsignedp);
                return;
              }

          /* No suitable intermediate mode.
             Generate what we need with shifts.  */
          shift_amount = build_int_2 (GET_MODE_BITSIZE (to_mode)
                                      - GET_MODE_BITSIZE (from_mode), 0);
          from = gen_lowpart (to_mode, force_reg (from_mode, from));
          tmp = expand_shift (LSHIFT_EXPR, to_mode, from, shift_amount,
                              to, unsignedp);
          tmp = expand_shift (RSHIFT_EXPR, to_mode, tmp, shift_amount,
                              to, unsignedp);
          if (tmp != to)
            emit_move_insn (to, tmp);
          return;
        }
    }

  /* Support special truncate insns for certain modes.  */
  if (trunc_optab->handlers[to_mode][from_mode].insn_code != CODE_FOR_nothing)
    {
      emit_unop_insn (trunc_optab->handlers[to_mode][from_mode].insn_code,
                      to, from, UNKNOWN);
      return;
    }

  /* Handle truncation of volatile memrefs, and so on;
     the things that couldn't be truncated directly,
     and for which there was no special instruction.

     ??? Code above formerly short-circuited this, for most integer
     mode pairs, with a force_reg in from_mode followed by a recursive
     call to this routine.  Appears always to have been wrong.  */
  if (GET_MODE_BITSIZE (to_mode) < GET_MODE_BITSIZE (from_mode))
    {
      rtx temp = force_reg (to_mode, gen_lowpart (to_mode, from));
      emit_move_insn (to, temp);
      return;
    }

  /* Mode combination is not recognized.  */
  abort ();
}

/* Return an rtx for a value that would result
   from converting X to mode MODE.
   Both X and MODE may be floating, or both integer.
   UNSIGNEDP is nonzero if X is an unsigned value.
   This can be done by referring to a part of X in place
   or by copying to a new temporary with conversion.

   This function *must not* call protect_from_queue
   except when putting X into an insn (in which case convert_move does it).  */

rtx
convert_to_mode (enum machine_mode mode, rtx x, int unsignedp)
{
  return convert_modes (mode, VOIDmode, x, unsignedp);
}

/* Return an rtx for a value that would result
   from converting X from mode OLDMODE to mode MODE.
   Both modes may be floating, or both integer.
   UNSIGNEDP is nonzero if X is an unsigned value.

   This can be done by referring to a part of X in place
   or by copying to a new temporary with conversion.

   You can give VOIDmode for OLDMODE, if you are sure X has a nonvoid mode.

   This function *must not* call protect_from_queue
   except when putting X into an insn (in which case convert_move does it).  */

rtx
convert_modes (enum machine_mode mode, enum machine_mode oldmode, rtx x, int unsignedp)
{
  rtx temp;

  /* If FROM is a SUBREG that indicates that we have already done at least
     the required extension, strip it.  */

  if (GET_CODE (x) == SUBREG && SUBREG_PROMOTED_VAR_P (x)
      && GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) >= GET_MODE_SIZE (mode)
      && SUBREG_PROMOTED_UNSIGNED_P (x) == unsignedp)
    x = gen_lowpart (mode, x);

  if (GET_MODE (x) != VOIDmode)
    oldmode = GET_MODE (x);

  if (mode == oldmode)
    return x;

  /* There is one case that we must handle specially: If we are converting
     a CONST_INT into a mode whose size is twice HOST_BITS_PER_WIDE_INT and
     we are to interpret the constant as unsigned, gen_lowpart will do
     the wrong if the constant appears negative.  What we want to do is
     make the high-order word of the constant zero, not all ones.  */

  if (unsignedp && GET_MODE_CLASS (mode) == MODE_INT
      && GET_MODE_BITSIZE (mode) == 2 * HOST_BITS_PER_WIDE_INT
      && GET_CODE (x) == CONST_INT && INTVAL (x) < 0)
    {
      HOST_WIDE_INT val = INTVAL (x);

      if (oldmode != VOIDmode
          && HOST_BITS_PER_WIDE_INT > GET_MODE_BITSIZE (oldmode))
        {
          int width = GET_MODE_BITSIZE (oldmode);

          /* We need to zero extend VAL.  */
          val &= ((HOST_WIDE_INT) 1 << width) - 1;
        }

      return immed_double_const (val, (HOST_WIDE_INT) 0, mode);
    }

  /* We can do this with a gen_lowpart if both desired and current modes
     are integer, and this is either a constant integer, a register, or a
     non-volatile MEM.  Except for the constant case where MODE is no
     wider than HOST_BITS_PER_WIDE_INT, we must be narrowing the operand.  */

  if ((GET_CODE (x) == CONST_INT
       && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
      || (GET_MODE_CLASS (mode) == MODE_INT
          && GET_MODE_CLASS (oldmode) == MODE_INT
          && (GET_CODE (x) == CONST_DOUBLE
              || (GET_MODE_SIZE (mode) <= GET_MODE_SIZE (oldmode)
                  && ((GET_CODE (x) == MEM && ! MEM_VOLATILE_P (x)
                       && direct_load[(int) mode])
                      || (GET_CODE (x) == REG
                          && (! HARD_REGISTER_P (x)
                              || HARD_REGNO_MODE_OK (REGNO (x), mode))
                          && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
                                                    GET_MODE_BITSIZE (GET_MODE (x)))))))))
    {
      /* ?? If we don't know OLDMODE, we have to assume here that
         X does not need sign- or zero-extension.   This may not be
         the case, but it's the best we can do.  */
      if (GET_CODE (x) == CONST_INT && oldmode != VOIDmode
          && GET_MODE_SIZE (mode) > GET_MODE_SIZE (oldmode))
        {
          HOST_WIDE_INT val = INTVAL (x);
          int width = GET_MODE_BITSIZE (oldmode);

          /* We must sign or zero-extend in this case.  Start by
             zero-extending, then sign extend if we need to.  */
          val &= ((HOST_WIDE_INT) 1 << width) - 1;
          if (! unsignedp
              && (val & ((HOST_WIDE_INT) 1 << (width - 1))))
            val |= (HOST_WIDE_INT) (-1) << width;

          return gen_int_mode (val, mode);
        }

      return gen_lowpart (mode, x);
    }

  /* Converting from integer constant into mode is always equivalent to an
     subreg operation.  */
  if (VECTOR_MODE_P (mode) && GET_MODE (x) == VOIDmode)
    {
      if (GET_MODE_BITSIZE (mode) != GET_MODE_BITSIZE (oldmode))
        abort ();
      return simplify_gen_subreg (mode, x, oldmode, 0);
    }

  temp = gen_reg_rtx (mode);
  convert_move (temp, x, unsignedp);
  return temp;
}
\f
/* STORE_MAX_PIECES is the number of bytes at a time that we can
   store efficiently.  Due to internal GCC limitations, this is
   MOVE_MAX_PIECES limited by the number of bytes GCC can represent
   for an immediate constant.  */

#define STORE_MAX_PIECES  MIN (MOVE_MAX_PIECES, 2 * sizeof (HOST_WIDE_INT))

/* Determine whether the LEN bytes can be moved by using several move
   instructions.  Return nonzero if a call to move_by_pieces should
   succeed.  */

int
can_move_by_pieces (unsigned HOST_WIDE_INT len,
                    unsigned int align ATTRIBUTE_UNUSED)
{
  return MOVE_BY_PIECES_P (len, align);
}

/* Generate several move instructions to copy LEN bytes from block FROM to
   block TO.  (These are MEM rtx's with BLKmode).  The caller must pass FROM
   and TO through protect_from_queue before calling.

   If PUSH_ROUNDING is defined and TO is NULL, emit_single_push_insn is
   used to push FROM to the stack.

   ALIGN is maximum stack alignment we can assume.

   If ENDP is 0 return to, if ENDP is 1 return memory at the end ala
   mempcpy, and if ENDP is 2 return memory the end minus one byte ala
   stpcpy.  */

rtx
move_by_pieces (rtx to, rtx from, unsigned HOST_WIDE_INT len,
                unsigned int align, int endp)
{
  struct move_by_pieces data;
  rtx to_addr, from_addr = XEXP (from, 0);
  unsigned int max_size = MOVE_MAX_PIECES + 1;
  enum machine_mode mode = VOIDmode, tmode;
  enum insn_code icode;

  align = MIN (to ? MEM_ALIGN (to) : align, MEM_ALIGN (from));

  data.offset = 0;
  data.from_addr = from_addr;
  if (to)
    {
      to_addr = XEXP (to, 0);
      data.to = to;
      data.autinc_to
        = (GET_CODE (to_addr) == PRE_INC || GET_CODE (to_addr) == PRE_DEC
           || GET_CODE (to_addr) == POST_INC || GET_CODE (to_addr) == POST_DEC);
      data.reverse
        = (GET_CODE (to_addr) == PRE_DEC || GET_CODE (to_addr) == POST_DEC);
    }
  else
    {
      to_addr = NULL_RTX;
      data.to = NULL_RTX;
      data.autinc_to = 1;
#ifdef STACK_GROWS_DOWNWARD
      data.reverse = 1;
#else
      data.reverse = 0;
#endif
    }
  data.to_addr = to_addr;
  data.from = from;
  data.autinc_from
    = (GET_CODE (from_addr) == PRE_INC || GET_CODE (from_addr) == PRE_DEC
       || GET_CODE (from_addr) == POST_INC
       || GET_CODE (from_addr) == POST_DEC);

  data.explicit_inc_from = 0;
  data.explicit_inc_to = 0;
  if (data.reverse) data.offset = len;
  data.len = len;

  /* If copying requires more than two move insns,
     copy addresses to registers (to make displacements shorter)
     and use post-increment if available.  */
  if (!(data.autinc_from && data.autinc_to)
      && move_by_pieces_ninsns (len, align) > 2)
    {
      /* Find the mode of the largest move...  */
      for (tmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
           tmode != VOIDmode; tmode = GET_MODE_WIDER_MODE (tmode))
        if (GET_MODE_SIZE (tmode) < max_size)
          mode = tmode;

      if (USE_LOAD_PRE_DECREMENT (mode) && data.reverse && ! data.autinc_from)
        {
          data.from_addr = copy_addr_to_reg (plus_constant (from_addr, len));
          data.autinc_from = 1;
          data.explicit_inc_from = -1;
        }
      if (USE_LOAD_POST_INCREMENT (mode) && ! data.autinc_from)
        {
          data.from_addr = copy_addr_to_reg (from_addr);
          data.autinc_from = 1;
          data.explicit_inc_from = 1;
        }
      if (!data.autinc_from && CONSTANT_P (from_addr))
        data.from_addr = copy_addr_to_reg (from_addr);
      if (USE_STORE_PRE_DECREMENT (mode) && data.reverse && ! data.autinc_to)
        {
          data.to_addr = copy_addr_to_reg (plus_constant (to_addr, len));
          data.autinc_to = 1;
          data.explicit_inc_to = -1;
        }
      if (USE_STORE_POST_INCREMENT (mode) && ! data.reverse && ! data.autinc_to)
        {
          data.to_addr = copy_addr_to_reg (to_addr);
          data.autinc_to = 1;
          data.explicit_inc_to = 1;
        }
      if (!data.autinc_to && CONSTANT_P (to_addr))
        data.to_addr = copy_addr_to_reg (to_addr);
    }

  if (! SLOW_UNALIGNED_ACCESS (word_mode, align)
      || align > MOVE_MAX * BITS_PER_UNIT || align >= BIGGEST_ALIGNMENT)
    align = MOVE_MAX * BITS_PER_UNIT;

  /* First move what we can in the largest integer mode, then go to
     successively smaller modes.  */

  while (max_size > 1)
    {
      for (tmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
           tmode != VOIDmode; tmode = GET_MODE_WIDER_MODE (tmode))
        if (GET_MODE_SIZE (tmode) < max_size)
          mode = tmode;

      if (mode == VOIDmode)
        break;

      icode = mov_optab->handlers[(int) mode].insn_code;
      if (icode != CODE_FOR_nothing && align >= GET_MODE_ALIGNMENT (mode))
        move_by_pieces_1 (GEN_FCN (icode), mode, &data);

      max_size = GET_MODE_SIZE (mode);
    }

  /* The code above should have handled everything.  */
  if (data.len > 0)
    abort ();

  if (endp)
    {
      rtx to1;

      if (data.reverse)
        abort ();
      if (data.autinc_to)
        {
          if (endp == 2)
            {
              if (HAVE_POST_INCREMENT && data.explicit_inc_to > 0)
                emit_insn (gen_add2_insn (data.to_addr, constm1_rtx));
              else
                data.to_addr = copy_addr_to_reg (plus_constant (data.to_addr,
                                                                -1));
            }
          to1 = adjust_automodify_address (data.to, QImode, data.to_addr,
                                           data.offset);
        }
      else
        {
          if (endp == 2)
            --data.offset;
          to1 = adjust_address (data.to, QImode, data.offset);
        }
      return to1;
    }
  else
    return data.to;
}

/* Return number of insns required to move L bytes by pieces.
   ALIGN (in bits) is maximum alignment we can assume.  */

static unsigned HOST_WIDE_INT
move_by_pieces_ninsns (unsigned HOST_WIDE_INT l, unsigned int align)
{
  unsigned HOST_WIDE_INT n_insns = 0;
  unsigned HOST_WIDE_INT max_size = MOVE_MAX + 1;

  if (! SLOW_UNALIGNED_ACCESS (word_mode, align)
      || align > MOVE_MAX * BITS_PER_UNIT || align >= BIGGEST_ALIGNMENT)
    align = MOVE_MAX * BITS_PER_UNIT;

  while (max_size > 1)
    {
      enum machine_mode mode = VOIDmode, tmode;
      enum insn_code icode;

      for (tmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
           tmode != VOIDmode; tmode = GET_MODE_WIDER_MODE (tmode))
        if (GET_MODE_SIZE (tmode) < max_size)
          mode = tmode;

      if (mode == VOIDmode)
        break;

      icode = mov_optab->handlers[(int) mode].insn_code;
      if (icode != CODE_FOR_nothing && align >= GET_MODE_ALIGNMENT (mode))
        n_insns += l / GET_MODE_SIZE (mode), l %= GET_MODE_SIZE (mode);

      max_size = GET_MODE_SIZE (mode);
    }

  if (l)
    abort ();
  return n_insns;
}

/* Subroutine of move_by_pieces.  Move as many bytes as appropriate
   with move instructions for mode MODE.  GENFUN is the gen_... function
   to make a move insn for that mode.  DATA has all the other info.  */

static void
move_by_pieces_1 (rtx (*genfun) (rtx, ...), enum machine_mode mode,
                  struct move_by_pieces *data)
{
  unsigned int size = GET_MODE_SIZE (mode);
  rtx to1 = NULL_RTX, from1;

  while (data->len >= size)
    {
      if (data->reverse)
        data->offset -= size;

      if (data->to)
        {
          if (data->autinc_to)
            to1 = adjust_automodify_address (data->to, mode, data->to_addr,
                                             data->offset);
          else
            to1 = adjust_address (data->to, mode, data->offset);
        }

      if (data->autinc_from)
        from1 = adjust_automodify_address (data->from, mode, data->from_addr,
                                           data->offset);
      else
        from1 = adjust_address (data->from, mode, data->offset);

      if (HAVE_PRE_DECREMENT && data->explicit_inc_to < 0)
        emit_insn (gen_add2_insn (data->to_addr,
                                  GEN_INT (-(HOST_WIDE_INT)size)));
      if (HAVE_PRE_DECREMENT && data->explicit_inc_from < 0)
        emit_insn (gen_add2_insn (data->from_addr,
                                  GEN_INT (-(HOST_WIDE_INT)size)));

      if (data->to)
        emit_insn ((*genfun) (to1, from1));
      else
        {
#ifdef PUSH_ROUNDING
          emit_single_push_insn (mode, from1, NULL);
#else
          abort ();
#endif
        }

      if (HAVE_POST_INCREMENT && data->explicit_inc_to > 0)
        emit_insn (gen_add2_insn (data->to_addr, GEN_INT (size)));
      if (HAVE_POST_INCREMENT && data->explicit_inc_from > 0)
        emit_insn (gen_add2_insn (data->from_addr, GEN_INT (size)));

      if (! data->reverse)
        data->offset += size;

      data->len -= size;
    }
}
\f
/* Emit code to move a block Y to a block X.  This may be done with
   string-move instructions, with multiple scalar move instructions,
   or with a library call.

   Both X and Y must be MEM rtx's (perhaps inside VOLATILE) with mode BLKmode.
   SIZE is an rtx that says how long they are.
   ALIGN is the maximum alignment we can assume they have.
   METHOD describes what kind of copy this is, and what mechanisms may be used.

   Return the address of the new block, if memcpy is called and returns it,
   0 otherwise.  */

rtx
emit_block_move (rtx x, rtx y, rtx size, enum block_op_methods method)
{
  bool may_use_call;
  rtx retval = 0;
  unsigned int align;

  switch (method)
    {
    case BLOCK_OP_NORMAL:
      may_use_call = true;
      break;

    case BLOCK_OP_CALL_PARM:
      may_use_call = block_move_libcall_safe_for_call_parm ();

      /* Make inhibit_defer_pop nonzero around the library call
         to force it to pop the arguments right away.  */
      NO_DEFER_POP;
      break;

    case BLOCK_OP_NO_LIBCALL:
      may_use_call = false;
      break;

    default:
      abort ();
    }

  align = MIN (MEM_ALIGN (x), MEM_ALIGN (y));

  if (GET_MODE (x) != BLKmode)
    abort ();
  if (GET_MODE (y) != BLKmode)
    abort ();

  x = protect_from_queue (x, 1);
  y = protect_from_queue (y, 0);
  size = protect_from_queue (size, 0);

  if (GET_CODE (x) != MEM)
    abort ();
  if (GET_CODE (y) != MEM)
    abort ();
  if (size == 0)
    abort ();

  /* Set MEM_SIZE as appropriate for this block copy.  The main place this
     can be incorrect is coming from __builtin_memcpy.  */
  if (GET_CODE (size) == CONST_INT)
    {
      if (INTVAL (size) == 0)
        return 0;

      x = shallow_copy_rtx (x);
      y = shallow_copy_rtx (y);
      set_mem_size (x, size);
      set_mem_size (y, size);
    }

  if (GET_CODE (size) == CONST_INT && MOVE_BY_PIECES_P (INTVAL (size), align))
    move_by_pieces (x, y, INTVAL (size), align, 0);
  else if (emit_block_move_via_movstr (x, y, size, align))
    ;
  else if (may_use_call)
    retval = emit_block_move_via_libcall (x, y, size);
  else
    emit_block_move_via_loop (x, y, size, align);

  if (method == BLOCK_OP_CALL_PARM)
    OK_DEFER_POP;

  return retval;
}

/* A subroutine of emit_block_move.  Returns true if calling the
   block move libcall will not clobber any parameters which may have
   already been placed on the stack.  */

static bool
block_move_libcall_safe_for_call_parm (void)
{
  /* If arguments are pushed on the stack, then they're safe.  */
  if (PUSH_ARGS)
    return true;

  /* If registers go on the stack anyway, any argument is sure to clobber
     an outgoing argument.  */
#if defined (REG_PARM_STACK_SPACE) && defined (OUTGOING_REG_PARM_STACK_SPACE)
  {
    tree fn = emit_block_move_libcall_fn (false);
    (void) fn;
    if (REG_PARM_STACK_SPACE (fn) != 0)
      return false;
  }
#endif

  /* If any argument goes in memory, then it might clobber an outgoing
     argument.  */
  {
    CUMULATIVE_ARGS args_so_far;
    tree fn, arg;

    fn = emit_block_move_libcall_fn (false);
    INIT_CUMULATIVE_ARGS (args_so_far, TREE_TYPE (fn), NULL_RTX, 0, 3);

    arg = TYPE_ARG_TYPES (TREE_TYPE (fn));
    for ( ; arg != void_list_node ; arg = TREE_CHAIN (arg))
      {
        enum machine_mode mode = TYPE_MODE (TREE_VALUE (arg));
        rtx tmp = FUNCTION_ARG (args_so_far, mode, NULL_TREE, 1);
        if (!tmp || !REG_P (tmp))
          return false;
#ifdef FUNCTION_ARG_PARTIAL_NREGS
        if (FUNCTION_ARG_PARTIAL_NREGS (args_so_far, mode,
                                        NULL_TREE, 1))
          return false;
#endif
        FUNCTION_ARG_ADVANCE (args_so_far, mode, NULL_TREE, 1);
      }
  }
  return true;
}

/* A subroutine of emit_block_move.  Expand a movstr pattern;
   return true if successful.  */

static bool
emit_block_move_via_movstr (rtx x, rtx y, rtx size, unsigned int align)
{
  rtx opalign = GEN_INT (align / BITS_PER_UNIT);
  int save_volatile_ok = volatile_ok;
  enum machine_mode mode;

  /* Since this is a move insn, we don't care about volatility.  */
  volatile_ok = 1;

  /* Try the most limited insn first, because there's no point
     including more than one in the machine description unless
     the more limited one has some advantage.  */

  for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
       mode = GET_MODE_WIDER_MODE (mode))
    {
      enum insn_code code = movstr_optab[(int) mode];
      insn_operand_predicate_fn pred;

      if (code != CODE_FOR_nothing
          /* We don't need MODE to be narrower than BITS_PER_HOST_WIDE_INT
             here because if SIZE is less than the mode mask, as it is
             returned by the macro, it will definitely be less than the
             actual mode mask.  */
          && ((GET_CODE (size) == CONST_INT
               && ((unsigned HOST_WIDE_INT) INTVAL (size)
                   <= (GET_MODE_MASK (mode) >> 1)))
              || GET_MODE_BITSIZE (mode) >= BITS_PER_WORD)
          && ((pred = insn_data[(int) code].operand[0].predicate) == 0
              || (*pred) (x, BLKmode))
          && ((pred = insn_data[(int) code].operand[1].predicate) == 0
              || (*pred) (y, BLKmode))
          && ((pred = insn_data[(int) code].operand[3].predicate) == 0
              || (*pred) (opalign, VOIDmode)))
        {
          rtx op2;
          rtx last = get_last_insn ();
          rtx pat;

          op2 = convert_to_mode (mode, size, 1);
          pred = insn_data[(int) code].operand[2].predicate;
          if (pred != 0 && ! (*pred) (op2, mode))
            op2 = copy_to_mode_reg (mode, op2);

          /* ??? When called via emit_block_move_for_call, it'd be
             nice if there were some way to inform the backend, so
             that it doesn't fail the expansion because it thinks
             emitting the libcall would be more efficient.  */

          pat = GEN_FCN ((int) code) (x, y, op2, opalign);
          if (pat)
            {
              emit_insn (pat);
              volatile_ok = save_volatile_ok;
              return true;
            }
          else
            delete_insns_since (last);
        }
    }

  volatile_ok = save_volatile_ok;
  return false;
}

/* A subroutine of emit_block_move.  Expand a call to memcpy or bcopy.
   Return the return value from memcpy, 0 otherwise.  */

static rtx
emit_block_move_via_libcall (rtx dst, rtx src, rtx size)
{
  rtx dst_addr, src_addr;
  tree call_expr, arg_list, fn, src_tree, dst_tree, size_tree;
  enum machine_mode size_mode;
  rtx retval;

  /* DST, SRC, or SIZE may have been passed through protect_from_queue.

     It is unsafe to save the value generated by protect_from_queue and reuse
     it later.  Consider what happens if emit_queue is called before the
     return value from protect_from_queue is used.

     Expansion of the CALL_EXPR below will call emit_queue before we are
     finished emitting RTL for argument setup.  So if we are not careful we
     could get the wrong value for an argument.

     To avoid this problem we go ahead and emit code to copy the addresses of
     DST and SRC and SIZE into new pseudos.  We can then place those new
     pseudos into an RTL_EXPR and use them later, even after a call to
     emit_queue.

     Note this is not strictly needed for library calls since they do not call
     emit_queue before loading their arguments.  However, we may need to have
     library calls call emit_queue in the future since failing to do so could
     cause problems for targets which define SMALL_REGISTER_CLASSES and pass
     arguments in registers.  */

  dst_addr = copy_to_mode_reg (Pmode, XEXP (dst, 0));
  src_addr = copy_to_mode_reg (Pmode, XEXP (src, 0));

  dst_addr = convert_memory_address (ptr_mode, dst_addr);
  src_addr = convert_memory_address (ptr_mode, src_addr);

  dst_tree = make_tree (ptr_type_node, dst_addr);
  src_tree = make_tree (ptr_type_node, src_addr);

  if (TARGET_MEM_FUNCTIONS)
    size_mode = TYPE_MODE (sizetype);
  else
    size_mode = TYPE_MODE (unsigned_type_node);

  size = convert_to_mode (size_mode, size, 1);
  size = copy_to_mode_reg (size_mode, size);

  /* It is incorrect to use the libcall calling conventions to call
     memcpy in this context.  This could be a user call to memcpy and
     the user may wish to examine the return value from memcpy.  For
     targets where libcalls and normal calls have different conventions
     for returning pointers, we could end up generating incorrect code.

     For convenience, we generate the call to bcopy this way as well.  */

  if (TARGET_MEM_FUNCTIONS)
    size_tree = make_tree (sizetype, size);
  else
    size_tree = make_tree (unsigned_type_node, size);

  fn = emit_block_move_libcall_fn (true);
  arg_list = tree_cons (NULL_TREE, size_tree, NULL_TREE);
  if (TARGET_MEM_FUNCTIONS)
    {
      arg_list = tree_cons (NULL_TREE, src_tree, arg_list);
      arg_list = tree_cons (NULL_TREE, dst_tree, arg_list);
    }
  else
    {
      arg_list = tree_cons (NULL_TREE, dst_tree, arg_list);
      arg_list = tree_cons (NULL_TREE, src_tree, arg_list);
    }

  /* Now we have to build up the CALL_EXPR itself.  */
  call_expr = build1 (ADDR_EXPR, build_pointer_type (TREE_TYPE (fn)), fn);
  call_expr = build (CALL_EXPR, TREE_TYPE (TREE_TYPE (fn)),
                     call_expr, arg_list, NULL_TREE);

  retval = expand_expr (call_expr, NULL_RTX, VOIDmode, 0);

  /* If we are initializing a readonly value, show the above call clobbered
     it. Otherwise, a load from it may erroneously be hoisted from a loop, or
     the delay slot scheduler might overlook conflicts and take nasty
     decisions.  */
  if (RTX_UNCHANGING_P (dst))
    add_function_usage_to
      (last_call_insn (), gen_rtx_EXPR_LIST (VOIDmode,
                                             gen_rtx_CLOBBER (VOIDmode, dst),
                                             NULL_RTX));

  return TARGET_MEM_FUNCTIONS ? retval : NULL_RTX;
}

/* A subroutine of emit_block_move_via_libcall.  Create the tree node
   for the function we use for block copies.  The first time FOR_CALL
   is true, we call assemble_external.  */

static GTY(()) tree block_move_fn;

void
init_block_move_fn (const char *asmspec)
{
  if (!block_move_fn)
    {
      tree args, fn;

      if (TARGET_MEM_FUNCTIONS)
        {
          fn = get_identifier ("memcpy");
          args = build_function_type_list (ptr_type_node, ptr_type_node,
                                           const_ptr_type_node, sizetype,
                                           NULL_TREE);
        }
      else
        {
          fn = get_identifier ("bcopy");
          args = build_function_type_list (void_type_node, const_ptr_type_node,
                                           ptr_type_node, unsigned_type_node,
                                           NULL_TREE);
        }

      fn = build_decl (FUNCTION_DECL, fn, args);
      DECL_EXTERNAL (fn) = 1;
      TREE_PUBLIC (fn) = 1;
      DECL_ARTIFICIAL (fn) = 1;
      TREE_NOTHROW (fn) = 1;

      block_move_fn = fn;
    }

  if (asmspec)
    {
      SET_DECL_RTL (block_move_fn, NULL_RTX);
      SET_DECL_ASSEMBLER_NAME (block_move_fn, get_identifier (asmspec));
    }
}

static tree
emit_block_move_libcall_fn (int for_call)
{
  static bool emitted_extern;

  if (!block_move_fn)
    init_block_move_fn (NULL);

  if (for_call && !emitted_extern)
    {
      emitted_extern = true;
      make_decl_rtl (block_move_fn, NULL);
      assemble_external (block_move_fn);
    }

  return block_move_fn;
}

/* A subroutine of emit_block_move.  Copy the data via an explicit
   loop.  This is used only when libcalls are forbidden.  */
/* ??? It'd be nice to copy in hunks larger than QImode.  */

static void
emit_block_move_via_loop (rtx x, rtx y, rtx size,
                          unsigned int align ATTRIBUTE_UNUSED)
{
  rtx cmp_label, top_label, iter, x_addr, y_addr, tmp;
  enum machine_mode iter_mode;

  iter_mode = GET_MODE (size);
  if (iter_mode == VOIDmode)
    iter_mode = word_mode;

  top_label = gen_label_rtx ();
  cmp_label = gen_label_rtx ();
  iter = gen_reg_rtx (iter_mode);

  emit_move_insn (iter, const0_rtx);

  x_addr = force_operand (XEXP (x, 0), NULL_RTX);
  y_addr = force_operand (XEXP (y, 0), NULL_RTX);
  do_pending_stack_adjust ();

  emit_note (NOTE_INSN_LOOP_BEG);

  emit_jump (cmp_label);
  emit_label (top_label);

  tmp = convert_modes (Pmode, iter_mode, iter, true);
  x_addr = gen_rtx_PLUS (Pmode, x_addr, tmp);
  y_addr = gen_rtx_PLUS (Pmode, y_addr, tmp);
  x = change_address (x, QImode, x_addr);
  y = change_address (y, QImode, y_addr);

  emit_move_insn (x, y);

  tmp = expand_simple_binop (iter_mode, PLUS, iter, const1_rtx, iter,
                             true, OPTAB_LIB_WIDEN);
  if (tmp != iter)
    emit_move_insn (iter, tmp);

  emit_note (NOTE_INSN_LOOP_CONT);
  emit_label (cmp_label);

  emit_cmp_and_jump_insns (iter, size, LT, NULL_RTX, iter_mode,
                           true, top_label);

  emit_note (NOTE_INSN_LOOP_END);
}
\f
/* Copy all or part of a value X into registers starting at REGNO.
   The number of registers to be filled is NREGS.  */

void
move_block_to_reg (int regno, rtx x, int nregs, enum machine_mode mode)
{
  int i;
#ifdef HAVE_load_multiple
  rtx pat;
  rtx last;
#endif

  if (nregs == 0)
    return;

  if (CONSTANT_P (x) && ! LEGITIMATE_CONSTANT_P (x))
    x = validize_mem (force_const_mem (mode, x));

  /* See if the machine can do this with a load multiple insn.  */
#ifdef HAVE_load_multiple
  if (HAVE_load_multiple)
    {
      last = get_last_insn ();
      pat = gen_load_multiple (gen_rtx_REG (word_mode, regno), x,
                               GEN_INT (nregs));
      if (pat)
        {
          emit_insn (pat);
          return;
        }
      else
        delete_insns_since (last);
    }
#endif

  for (i = 0; i < nregs; i++)
    emit_move_insn (gen_rtx_REG (word_mode, regno + i),
                    operand_subword_force (x, i, mode));
}

/* Copy all or part of a BLKmode value X out of registers starting at REGNO.
   The number of registers to be filled is NREGS.  */

void
move_block_from_reg (int regno, rtx x, int nregs)
{
  int i;

  if (nregs == 0)
    return;

  /* See if the machine can do this with a store multiple insn.  */
#ifdef HAVE_store_multiple
  if (HAVE_store_multiple)
    {
      rtx last = get_last_insn ();
      rtx pat = gen_store_multiple (x, gen_rtx_REG (word_mode, regno),
                                    GEN_INT (nregs));
      if (pat)
        {
          emit_insn (pat);
          return;
        }
      else
        delete_insns_since (last);
    }
#endif

  for (i = 0; i < nregs; i++)
    {
      rtx tem = operand_subword (x, i, 1, BLKmode);

      if (tem == 0)
        abort ();

      emit_move_insn (tem, gen_rtx_REG (word_mode, regno + i));
    }
}

/* Generate a PARALLEL rtx for a new non-consecutive group of registers from
   ORIG, where ORIG is a non-consecutive group of registers represented by
   a PARALLEL.  The clone is identical to the original except in that the
   original set of registers is replaced by a new set of pseudo registers.
   The new set has the same modes as the original set.  */

rtx
gen_group_rtx (rtx orig)
{
  int i, length;
  rtx *tmps;

  if (GET_CODE (orig) != PARALLEL)
    abort ();

  length = XVECLEN (orig, 0);
  tmps = alloca (sizeof (rtx) * length);

  /* Skip a NULL entry in first slot.  */
  i = XEXP (XVECEXP (orig, 0, 0), 0) ? 0 : 1;

  if (i)
    tmps[0] = 0;

  for (; i < length; i++)
    {
      enum machine_mode mode = GET_MODE (XEXP (XVECEXP (orig, 0, i), 0));
      rtx offset = XEXP (XVECEXP (orig, 0, i), 1);

      tmps[i] = gen_rtx_EXPR_LIST (VOIDmode, gen_reg_rtx (mode), offset);
    }

  return gen_rtx_PARALLEL (GET_MODE (orig), gen_rtvec_v (length, tmps));
}

/* Emit code to move a block ORIG_SRC of type TYPE to a block DST,
   where DST is non-consecutive registers represented by a PARALLEL.
   SSIZE represents the total size of block ORIG_SRC in bytes, or -1
   if not known.  */

void
emit_group_load (rtx dst, rtx orig_src, tree type ATTRIBUTE_UNUSED, int ssize)
{
  rtx *tmps, src;
  int start, i;

  if (GET_CODE (dst) != PARALLEL)
    abort ();

  /* Check for a NULL entry, used to indicate that the parameter goes
     both on the stack and in registers.  */
  if (XEXP (XVECEXP (dst, 0, 0), 0))
    start = 0;
  else
    start = 1;

  tmps = alloca (sizeof (rtx) * XVECLEN (dst, 0));

  /* Process the pieces.  */
  for (i = start; i < XVECLEN (dst, 0); i++)
    {
      enum machine_mode mode = GET_MODE (XEXP (XVECEXP (dst, 0, i), 0));
      HOST_WIDE_INT bytepos = INTVAL (XEXP (XVECEXP (dst, 0, i), 1));
      unsigned int bytelen = GET_MODE_SIZE (mode);
      int shift = 0;

      /* Handle trailing fragments that run over the size of the struct.  */
      if (ssize >= 0 && bytepos + (HOST_WIDE_INT) bytelen > ssize)
        {
          /* Arrange to shift the fragment to where it belongs.
             extract_bit_field loads to the lsb of the reg.  */
          if (
#ifdef BLOCK_REG_PADDING
              BLOCK_REG_PADDING (GET_MODE (orig_src), type, i == start)
              == (BYTES_BIG_ENDIAN ? upward : downward)
#else
              BYTES_BIG_ENDIAN
#endif
              )
            shift = (bytelen - (ssize - bytepos)) * BITS_PER_UNIT;
          bytelen = ssize - bytepos;
          if (bytelen <= 0)
            abort ();
        }

      /* If we won't be loading directly from memory, protect the real source
         from strange tricks we might play; but make sure that the source can
         be loaded directly into the destination.  */
      src = orig_src;
      if (GET_CODE (orig_src) != MEM
          && (!CONSTANT_P (orig_src)
              || (GET_MODE (orig_src) != mode
                  && GET_MODE (orig_src) != VOIDmode)))
        {
          if (GET_MODE (orig_src) == VOIDmode)
            src = gen_reg_rtx (mode);
          else
            src = gen_reg_rtx (GET_MODE (orig_src));

          emit_move_insn (src, orig_src);
        }

      /* Optimize the access just a bit.  */
      if (GET_CODE (src) == MEM
          && (! SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (src))
              || MEM_ALIGN (src) >= GET_MODE_ALIGNMENT (mode))
          && bytepos * BITS_PER_UNIT % GET_MODE_ALIGNMENT (mode) == 0
          && bytelen == GET_MODE_SIZE (mode))
        {
          tmps[i] = gen_reg_rtx (mode);
          emit_move_insn (tmps[i], adjust_address (src, mode, bytepos));
        }
      else if (GET_CODE (src) == CONCAT)
        {
          unsigned int slen = GET_MODE_SIZE (GET_MODE (src));
          unsigned int slen0 = GET_MODE_SIZE (GET_MODE (XEXP (src, 0)));

          if ((bytepos == 0 && bytelen == slen0)
              || (bytepos != 0 && bytepos + bytelen <= slen))
            {
              /* The following assumes that the concatenated objects all
                 have the same size.  In this case, a simple calculation
                 can be used to determine the object and the bit field
                 to be extracted.  */
              tmps[i] = XEXP (src, bytepos / slen0);
              if (! CONSTANT_P (tmps[i])
                  && (GET_CODE (tmps[i]) != REG || GET_MODE (tmps[i]) != mode))
                tmps[i] = extract_bit_field (tmps[i], bytelen * BITS_PER_UNIT,
                                             (bytepos % slen0) * BITS_PER_UNIT,
                                             1, NULL_RTX, mode, mode, ssize);
            }
          else if (bytepos == 0)
            {
              rtx mem = assign_stack_temp (GET_MODE (src), slen, 0);
              emit_move_insn (mem, src);
              tmps[i] = adjust_address (mem, mode, 0);
            }
          else
            abort ();
        }
      /* FIXME: A SIMD parallel will eventually lead to a subreg of a
         SIMD register, which is currently broken.  While we get GCC
         to emit proper RTL for these cases, let's dump to memory.  */
      else if (VECTOR_MODE_P (GET_MODE (dst))
               && GET_CODE (src) == REG)
        {
          int slen = GET_MODE_SIZE (GET_MODE (src));
          rtx mem;

          mem = assign_stack_temp (GET_MODE (src), slen, 0);
          emit_move_insn (mem, src);
          tmps[i] = adjust_address (mem, mode, (int) bytepos);
        }
      else if (CONSTANT_P (src) && GET_MODE (dst) != BLKmode
               && XVECLEN (dst, 0) > 1)
        tmps[i] = simplify_gen_subreg (mode, src, GET_MODE(dst), bytepos);
      else if (CONSTANT_P (src)
               || (GET_CODE (src) == REG && GET_MODE (src) == mode))
        tmps[i] = src;
      else
        tmps[i] = extract_bit_field (src, bytelen * BITS_PER_UNIT,
                                     bytepos * BITS_PER_UNIT, 1, NULL_RTX,
                                     mode, mode, ssize);

      if (shift)
        expand_binop (mode, ashl_optab, tmps[i], GEN_INT (shift),
                      tmps[i], 0, OPTAB_WIDEN);
    }

  emit_queue ();

  /* Copy the extracted pieces into the proper (probable) hard regs.  */
  for (i = start; i < XVECLEN (dst, 0); i++)
    emit_move_insn (XEXP (XVECEXP (dst, 0, i), 0), tmps[i]);
}

/* Emit code to move a block SRC to block DST, where SRC and DST are
   non-consecutive groups of registers, each represented by a PARALLEL.  */

void
emit_group_move (rtx dst, rtx src)
{
  int i;

  if (GET_CODE (src) != PARALLEL
      || GET_CODE (dst) != PARALLEL
      || XVECLEN (src, 0) != XVECLEN (dst, 0))
    abort ();

  /* Skip first entry if NULL.  */
  for (i = XEXP (XVECEXP (src, 0, 0), 0) ? 0 : 1; i < XVECLEN (src, 0); i++)
    emit_move_insn (XEXP (XVECEXP (dst, 0, i), 0),
                    XEXP (XVECEXP (src, 0, i), 0));
}

/* Emit code to move a block SRC to a block ORIG_DST of type TYPE,
   where SRC is non-consecutive registers represented by a PARALLEL.
   SSIZE represents the total size of block ORIG_DST, or -1 if not
   known.  */

void
emit_group_store (rtx orig_dst, rtx src, tree type ATTRIBUTE_UNUSED, int ssize)
{
  rtx *tmps, dst;
  int start, i;

  if (GET_CODE (src) != PARALLEL)
    abort ();

  /* Check for a NULL entry, used to indicate that the parameter goes
     both on the stack and in registers.  */
  if (XEXP (XVECEXP (src, 0, 0), 0))
    start = 0;
  else
    start = 1;

  tmps = alloca (sizeof (rtx) * XVECLEN (src, 0));

  /* Copy the (probable) hard regs into pseudos.  */
  for (i = start; i < XVECLEN (src, 0); i++)
    {
      rtx reg = XEXP (XVECEXP (src, 0, i), 0);
      tmps[i] = gen_reg_rtx (GET_MODE (reg));
      emit_move_insn (tmps[i], reg);
    }
  emit_queue ();

  /* If we won't be storing directly into memory, protect the real destination
     from strange tricks we might play.  */
  dst = orig_dst;
  if (GET_CODE (dst) == PARALLEL)
    {
      rtx temp;

      /* We can get a PARALLEL dst if there is a conditional expression in
         a return statement.  In that case, the dst and src are the same,
         so no action is necessary.  */
      if (rtx_equal_p (dst, src))
        return;

      /* It is unclear if we can ever reach here, but we may as well handle
         it.  Allocate a temporary, and split this into a store/load to/from
         the temporary.  */

      temp = assign_stack_temp (GET_MODE (dst), ssize, 0);
      emit_group_store (temp, src, type, ssize);
      emit_group_load (dst, temp, type, ssize);
      return;
    }
  else if (GET_CODE (dst) != MEM && GET_CODE (dst) != CONCAT)
    {
      dst = gen_reg_rtx (GET_MODE (orig_dst));
      /* Make life a bit easier for combine.  */
      emit_move_insn (dst, CONST0_RTX (GET_MODE (orig_dst)));
    }

  /* Process the pieces.  */
  for (i = start; i < XVECLEN (src, 0); i++)
    {
      HOST_WIDE_INT bytepos = INTVAL (XEXP (XVECEXP (src, 0, i), 1));
      enum machine_mode mode = GET_MODE (tmps[i]);
      unsigned int bytelen = GET_MODE_SIZE (mode);
      rtx dest = dst;

      /* Handle trailing fragments that run over the size of the struct.  */
      if (ssize >= 0 && bytepos + (HOST_WIDE_INT) bytelen > ssize)
        {
          /* store_bit_field always takes its value from the lsb.
             Move the fragment to the lsb if it's not already there.  */
          if (
#ifdef BLOCK_REG_PADDING
              BLOCK_REG_PADDING (GET_MODE (orig_dst), type, i == start)
              == (BYTES_BIG_ENDIAN ? upward : downward)
#else
              BYTES_BIG_ENDIAN
#endif
              )
            {
              int shift = (bytelen - (ssize - bytepos)) * BITS_PER_UNIT;
              expand_binop (mode, ashr_optab, tmps[i], GEN_INT (shift),
                            tmps[i], 0, OPTAB_WIDEN);
            }
          bytelen = ssize - bytepos;
        }

      if (GET_CODE (dst) == CONCAT)
        {
          if (bytepos + bytelen <= GET_MODE_SIZE (GET_MODE (XEXP (dst, 0))))
            dest = XEXP (dst, 0);
          else if (bytepos >= GET_MODE_SIZE (GET_MODE (XEXP (dst, 0))))
            {
              bytepos -= GET_MODE_SIZE (GET_MODE (XEXP (dst, 0)));
              dest = XEXP (dst, 1);
            }
          else if (bytepos == 0 && XVECLEN (src, 0))
            {
              dest = assign_stack_temp (GET_MODE (dest),
                                        GET_MODE_SIZE (GET_MODE (dest)), 0);
              emit_move_insn (adjust_address (dest, GET_MODE (tmps[i]), bytepos),
                              tmps[i]);
              dst = dest;
              break;
            }
          else
            abort ();
        }

      /* Optimize the access just a bit.  */
      if (GET_CODE (dest) == MEM
          && (! SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (dest))
              || MEM_ALIGN (dest) >= GET_MODE_ALIGNMENT (mode))
          && bytepos * BITS_PER_UNIT % GET_MODE_ALIGNMENT (mode) == 0
          && bytelen == GET_MODE_SIZE (mode))
        emit_move_insn (adjust_address (dest, mode, bytepos), tmps[i]);
      else
        store_bit_field (dest, bytelen * BITS_PER_UNIT, bytepos * BITS_PER_UNIT,
                         mode, tmps[i], ssize);
    }

  emit_queue ();

  /* Copy from the pseudo into the (probable) hard reg.  */
  if (orig_dst != dst)
    emit_move_insn (orig_dst, dst);
}

/* Generate code to copy a BLKmode object of TYPE out of a
   set of registers starting with SRCREG into TGTBLK.  If TGTBLK
   is null, a stack temporary is created.  TGTBLK is returned.

   The purpose of this routine is to handle functions that return
   BLKmode structures in registers.  Some machines (the PA for example)
   want to return all small structures in registers regardless of the
   structure's alignment.  */

rtx
copy_blkmode_from_reg (rtx tgtblk, rtx srcreg, tree type)
{
  unsigned HOST_WIDE_INT bytes = int_size_in_bytes (type);
  rtx src = NULL, dst = NULL;
  unsigned HOST_WIDE_INT bitsize = MIN (TYPE_ALIGN (type), BITS_PER_WORD);
  unsigned HOST_WIDE_INT bitpos, xbitpos, padding_correction = 0;

  if (tgtblk == 0)
    {
      tgtblk = assign_temp (build_qualified_type (type,
                                                  (TYPE_QUALS (type)
                                                   | TYPE_QUAL_CONST)),
                            0, 1, 1);
      preserve_temp_slots (tgtblk);
    }

  /* This code assumes srcreg is at least a full word.  If it isn't, copy it
     into a new pseudo which is a full word.  */

  if (GET_MODE (srcreg) != BLKmode
      && GET_MODE_SIZE (GET_MODE (srcreg)) < UNITS_PER_WORD)
    srcreg = convert_to_mode (word_mode, srcreg, TREE_UNSIGNED (type));

  /* If the structure doesn't take up a whole number of words, see whether
     SRCREG is padded on the left or on the right.  If it's on the left,
     set PADDING_CORRECTION to the number of bits to skip.

     In most ABIs, the structure will be returned at the least end of
     the register, which translates to right padding on little-endian
     targets and left padding on big-endian targets.  The opposite
     holds if the structure is returned at the most significant
     end of the register.  */
  if (bytes % UNITS_PER_WORD != 0
      && (targetm.calls.return_in_msb (type)
          ? !BYTES_BIG_ENDIAN
          : BYTES_BIG_ENDIAN))
    padding_correction
      = (BITS_PER_WORD - ((bytes % UNITS_PER_WORD) * BITS_PER_UNIT));

  /* Copy the structure BITSIZE bites at a time.

     We could probably emit more efficient code for machines which do not use
     strict alignment, but it doesn't seem worth the effort at the current
     time.  */
  for (bitpos = 0, xbitpos = padding_correction;
       bitpos < bytes * BITS_PER_UNIT;
       bitpos += bitsize, xbitpos += bitsize)
    {
      /* We need a new source operand each time xbitpos is on a
         word boundary and when xbitpos == padding_correction
         (the first time through).  */
      if (xbitpos % BITS_PER_WORD == 0
          || xbitpos == padding_correction)
        src = operand_subword_force (srcreg, xbitpos / BITS_PER_WORD,
                                     GET_MODE (srcreg));

      /* We need a new destination operand each time bitpos is on
         a word boundary.  */
      if (bitpos % BITS_PER_WORD == 0)
        dst = operand_subword (tgtblk, bitpos / BITS_PER_WORD, 1, BLKmode);

      /* Use xbitpos for the source extraction (right justified) and
         xbitpos for the destination store (left justified).  */
      store_bit_field (dst, bitsize, bitpos % BITS_PER_WORD, word_mode,
                       extract_bit_field (src, bitsize,
                                          xbitpos % BITS_PER_WORD, 1,
                                          NULL_RTX, word_mode, word_mode,
                                          BITS_PER_WORD),
                       BITS_PER_WORD);
    }

  return tgtblk;
}

/* Add a USE expression for REG to the (possibly empty) list pointed
   to by CALL_FUSAGE.  REG must denote a hard register.  */

void
use_reg (rtx *call_fusage, rtx reg)
{
  if (GET_CODE (reg) != REG
      || REGNO (reg) >= FIRST_PSEUDO_REGISTER)
    abort ();

  *call_fusage
    = gen_rtx_EXPR_LIST (VOIDmode,
                         gen_rtx_USE (VOIDmode, reg), *call_fusage);
}

/* Add USE expressions to *CALL_FUSAGE for each of NREGS consecutive regs,
   starting at REGNO.  All of these registers must be hard registers.  */

void
use_regs (rtx *call_fusage, int regno, int nregs)
{
  int i;

  if (regno + nregs > FIRST_PSEUDO_REGISTER)
    abort ();

  for (i = 0; i < nregs; i++)
    use_reg (call_fusage, regno_reg_rtx[regno + i]);
}

/* Add USE expressions to *CALL_FUSAGE for each REG contained in the
   PARALLEL REGS.  This is for calls that pass values in multiple
   non-contiguous locations.  The Irix 6 ABI has examples of this.  */

void
use_group_regs (rtx *call_fusage, rtx regs)
{
  int i;

  for (i = 0; i < XVECLEN (regs, 0); i++)
    {
      rtx reg = XEXP (XVECEXP (regs, 0, i), 0);

      /* A NULL entry means the parameter goes both on the stack and in
         registers.  This can also be a MEM for targets that pass values
         partially on the stack and partially in registers.  */
      if (reg != 0 && GET_CODE (reg) == REG)
        use_reg (call_fusage, reg);
    }
}
\f

/* Determine whether the LEN bytes generated by CONSTFUN can be
   stored to memory using several move instructions.  CONSTFUNDATA is
   a pointer which will be passed as argument in every CONSTFUN call.
   ALIGN is maximum alignment we can assume.  Return nonzero if a
   call to store_by_pieces should succeed.  */

int
can_store_by_pieces (unsigned HOST_WIDE_INT len,
                     rtx (*constfun) (void *, HOST_WIDE_INT, enum machine_mode),
                     void *constfundata, unsigned int align)
{
  unsigned HOST_WIDE_INT max_size, l;
  HOST_WIDE_INT offset = 0;
  enum machine_mode mode, tmode;
  enum insn_code icode;
  int reverse;
  rtx cst;

  if (len == 0)
    return 1;

  if (! STORE_BY_PIECES_P (len, align))
    return 0;

  if (! SLOW_UNALIGNED_ACCESS (word_mode, align)
      || align > MOVE_MAX * BITS_PER_UNIT || align >= BIGGEST_ALIGNMENT)
    align = MOVE_MAX * BITS_PER_UNIT;

  /* We would first store what we can in the largest integer mode, then go to
     successively smaller modes.  */

  for (reverse = 0;
       reverse <= (HAVE_PRE_DECREMENT || HAVE_POST_DECREMENT);
       reverse++)
    {
      l = len;
      mode = VOIDmode;
      max_size = STORE_MAX_PIECES + 1;
      while (max_size > 1)
        {
          for (tmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
               tmode != VOIDmode; tmode = GET_MODE_WIDER_MODE (tmode))
            if (GET_MODE_SIZE (tmode) < max_size)
              mode = tmode;

          if (mode == VOIDmode)
            break;

          icode = mov_optab->handlers[(int) mode].insn_code;
          if (icode != CODE_FOR_nothing
              && align >= GET_MODE_ALIGNMENT (mode))
            {
              unsigned int size = GET_MODE_SIZE (mode);

              while (l >= size)
                {
                  if (reverse)
                    offset -= size;

                  cst = (*constfun) (constfundata, offset, mode);
                  if (!LEGITIMATE_CONSTANT_P (cst))
                    return 0;

                  if (!reverse)
                    offset += size;

                  l -= size;
                }
            }

          max_size = GET_MODE_SIZE (mode);
        }

      /* The code above should have handled everything.  */
      if (l != 0)
        abort ();
    }

  return 1;
}

/* Generate several move instructions to store LEN bytes generated by
   CONSTFUN to block TO.  (A MEM rtx with BLKmode).  CONSTFUNDATA is a
   pointer which will be passed as argument in every CONSTFUN call.
   ALIGN is maximum alignment we can assume.
   If ENDP is 0 return to, if ENDP is 1 return memory at the end ala
   mempcpy, and if ENDP is 2 return memory the end minus one byte ala
   stpcpy.  */

rtx
store_by_pieces (rtx to, unsigned HOST_WIDE_INT len,
                 rtx (*constfun) (void *, HOST_WIDE_INT, enum machine_mode),
                 void *constfundata, unsigned int align, int endp)
{
  struct store_by_pieces data;

  if (len == 0)
    {
      if (endp == 2)
        abort ();
      return to;
    }

  if (! STORE_BY_PIECES_P (len, align))
    abort ();
  to = protect_from_queue (to, 1);
  data.constfun = constfun;
  data.constfundata = constfundata;
  data.len = len;
  data.to = to;
  store_by_pieces_1 (&data, align);
  if (endp)
    {
      rtx to1;

      if (data.reverse)
        abort ();
      if (data.autinc_to)
        {
          if (endp == 2)
            {
              if (HAVE_POST_INCREMENT && data.explicit_inc_to > 0)
                emit_insn (gen_add2_insn (data.to_addr, constm1_rtx));
              else
                data.to_addr = copy_addr_to_reg (plus_constant (data.to_addr,
                                                                -1));
            }
          to1 = adjust_automodify_address (data.to, QImode, data.to_addr,
                                           data.offset);
        }
      else
        {
          if (endp == 2)
            --data.offset;
          to1 = adjust_address (data.to, QImode, data.offset);
        }
      return to1;
    }
  else
    return data.to;
}

/* Generate several move instructions to clear LEN bytes of block TO.  (A MEM
   rtx with BLKmode).  The caller must pass TO through protect_from_queue
   before calling. ALIGN is maximum alignment we can assume.  */

static void
clear_by_pieces (rtx to, unsigned HOST_WIDE_INT len, unsigned int align)
{
  struct store_by_pieces data;

  if (len == 0)
    return;

  data.constfun = clear_by_pieces_1;
  data.constfundata = NULL;
  data.len = len;
  data.to = to;
  store_by_pieces_1 (&data, align);
}

/* Callback routine for clear_by_pieces.
   Return const0_rtx unconditionally.  */

static rtx
clear_by_pieces_1 (void *data ATTRIBUTE_UNUSED,
                   HOST_WIDE_INT offset ATTRIBUTE_UNUSED,
                   enum machine_mode mode ATTRIBUTE_UNUSED)
{
  return const0_rtx;
}

/* Subroutine of clear_by_pieces and store_by_pieces.
   Generate several move instructions to store LEN bytes of block TO.  (A MEM
   rtx with BLKmode).  The caller must pass TO through protect_from_queue
   before calling.  ALIGN is maximum alignment we can assume.  */

static void
store_by_pieces_1 (struct store_by_pieces *data ATTRIBUTE_UNUSED,
                   unsigned int align ATTRIBUTE_UNUSED)
{
  rtx to_addr = XEXP (data->to, 0);
  unsigned HOST_WIDE_INT max_size = STORE_MAX_PIECES + 1;
  enum machine_mode mode = VOIDmode, tmode;
  enum insn_code icode;

  data->offset = 0;
  data->to_addr = to_addr;
  data->autinc_to
    = (GET_CODE (to_addr) == PRE_INC || GET_CODE (to_addr) == PRE_DEC
       || GET_CODE (to_addr) == POST_INC || GET_CODE (to_addr) == POST_DEC);

  data->explicit_inc_to = 0;
  data->reverse
    = (GET_CODE (to_addr) == PRE_DEC || GET_CODE (to_addr) == POST_DEC);
  if (data->reverse)
    data->offset = data->len;

  /* If storing requires more than two move insns,
     copy addresses to registers (to make displacements shorter)
     and use post-increment if available.  */
  if (!data->autinc_to
      && move_by_pieces_ninsns (data->len, align) > 2)
    {
      /* Determine the main mode we'll be using.  */
      for (tmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
           tmode != VOIDmode; tmode = GET_MODE_WIDER_MODE (tmode))
        if (GET_MODE_SIZE (tmode) < max_size)
          mode = tmode;

      if (USE_STORE_PRE_DECREMENT (mode) && data->reverse && ! data->autinc_to)
        {
          data->to_addr = copy_addr_to_reg (plus_constant (to_addr, data->len));
          data->autinc_to = 1;
          data->explicit_inc_to = -1;
        }

      if (USE_STORE_POST_INCREMENT (mode) && ! data->reverse
          && ! data->autinc_to)
        {
          data->to_addr = copy_addr_to_reg (to_addr);
          data->autinc_to = 1;
          data->explicit_inc_to = 1;
        }

      if ( !data->autinc_to && CONSTANT_P (to_addr))
        data->to_addr = copy_addr_to_reg (to_addr);
    }

  if (! SLOW_UNALIGNED_ACCESS (word_mode, align)
      || align > MOVE_MAX * BITS_PER_UNIT || align >= BIGGEST_ALIGNMENT)
    align = MOVE_MAX * BITS_PER_UNIT;

  /* First store what we can in the largest integer mode, then go to
     successively smaller modes.  */

  while (max_size > 1)
    {
      for (tmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
           tmode != VOIDmode; tmode = GET_MODE_WIDER_MODE (tmode))
        if (GET_MODE_SIZE (tmode) < max_size)
          mode = tmode;

      if (mode == VOIDmode)
        break;

      icode = mov_optab->handlers[(int) mode].insn_code;
      if (icode != CODE_FOR_nothing && align >= GET_MODE_ALIGNMENT (mode))
        store_by_pieces_2 (GEN_FCN (icode), mode, data);

      max_size = GET_MODE_SIZE (mode);
    }

  /* The code above should have handled everything.  */
  if (data->len != 0)
    abort ();
}

/* Subroutine of store_by_pieces_1.  Store as many bytes as appropriate
   with move instructions for mode MODE.  GENFUN is the gen_... function
   to make a move insn for that mode.  DATA has all the other info.  */

static void
store_by_pieces_2 (rtx (*genfun) (rtx, ...), enum machine_mode mode,
                   struct store_by_pieces *data)
{
  unsigned int size = GET_MODE_SIZE (mode);
  rtx to1, cst;

  while (data->len >= size)
    {
      if (data->reverse)
        data->offset -= size;

      if (data->autinc_to)
        to1 = adjust_automodify_address (data->to, mode, data->to_addr,
                                         data->offset);
      else
        to1 = adjust_address (data->to, mode, data->offset);

      if (HAVE_PRE_DECREMENT && data->explicit_inc_to < 0)
        emit_insn (gen_add2_insn (data->to_addr,
                                  GEN_INT (-(HOST_WIDE_INT) size)));

      cst = (*data->constfun) (data->constfundata, data->offset, mode);
      emit_insn ((*genfun) (to1, cst));

      if (HAVE_POST_INCREMENT && data->explicit_inc_to > 0)
        emit_insn (gen_add2_insn (data->to_addr, GEN_INT (size)));

      if (! data->reverse)
        data->offset += size;

      data->len -= size;
    }
}
\f
/* Write zeros through the storage of OBJECT.  If OBJECT has BLKmode, SIZE is
   its length in bytes.  */

rtx
clear_storage (rtx object, rtx size)
{
  rtx retval = 0;
  unsigned int align = (GET_CODE (object) == MEM ? MEM_ALIGN (object)
                        : GET_MODE_ALIGNMENT (GET_MODE (object)));

  /* If OBJECT is not BLKmode and SIZE is the same size as its mode,
     just move a zero.  Otherwise, do this a piece at a time.  */
  if (GET_MODE (object) != BLKmode
      && GET_CODE (size) == CONST_INT
      && INTVAL (size) == (HOST_WIDE_INT) GET_MODE_SIZE (GET_MODE (object)))
    emit_move_insn (object, CONST0_RTX (GET_MODE (object)));
  else
    {
      object = protect_from_queue (object, 1);
      size = protect_from_queue (size, 0);

      if (size == const0_rtx)
        ;
      else if (GET_CODE (size) == CONST_INT
          && CLEAR_BY_PIECES_P (INTVAL (size), align))
        clear_by_pieces (object, INTVAL (size), align);
      else if (clear_storage_via_clrstr (object, size, align))
        ;
      else
        retval = clear_storage_via_libcall (object, size);
    }

  return retval;
}

/* A subroutine of clear_storage.  Expand a clrstr pattern;
   return true if successful.  */

static bool
clear_storage_via_clrstr (rtx object, rtx size, unsigned int align)
{
  /* Try the most limited insn first, because there's no point
     including more than one in the machine description unless
     the more limited one has some advantage.  */

  rtx opalign = GEN_INT (align / BITS_PER_UNIT);
  enum machine_mode mode;

  for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
       mode = GET_MODE_WIDER_MODE (mode))
    {
      enum insn_code code = clrstr_optab[(int) mode];
      insn_operand_predicate_fn pred;

      if (code != CODE_FOR_nothing
          /* We don't need MODE to be narrower than
             BITS_PER_HOST_WIDE_INT here because if SIZE is less than
             the mode mask, as it is returned by the macro, it will
             definitely be less than the actual mode mask.  */
          && ((GET_CODE (size) == CONST_INT
               && ((unsigned HOST_WIDE_INT) INTVAL (size)
                   <= (GET_MODE_MASK (mode) >> 1)))
              || GET_MODE_BITSIZE (mode) >= BITS_PER_WORD)
          && ((pred = insn_data[(int) code].operand[0].predicate) == 0
              || (*pred) (object, BLKmode))
          && ((pred = insn_data[(int) code].operand[2].predicate) == 0
              || (*pred) (opalign, VOIDmode)))
        {
          rtx op1;
          rtx last = get_last_insn ();
          rtx pat;

          op1 = convert_to_mode (mode, size, 1);
          pred = insn_data[(int) code].operand[1].predicate;
          if (pred != 0 && ! (*pred) (op1, mode))
            op1 = copy_to_mode_reg (mode, op1);

          pat = GEN_FCN ((int) code) (object, op1, opalign);
          if (pat)
            {
              emit_insn (pat);
              return true;
            }
          else
            delete_insns_since (last);
        }
    }

  return false;
}

/* A subroutine of clear_storage.  Expand a call to memset or bzero.
   Return the return value of memset, 0 otherwise.  */

static rtx
clear_storage_via_libcall (rtx object, rtx size)
{
  tree call_expr, arg_list, fn, object_tree, size_tree;
  enum machine_mode size_mode;
  rtx retval;

  /* OBJECT or SIZE may have been passed through protect_from_queue.

     It is unsafe to save the value generated by protect_from_queue
     and reuse it later.  Consider what happens if emit_queue is
     called before the return value from protect_from_queue is used.

     Expansion of the CALL_EXPR below will call emit_queue before
     we are finished emitting RTL for argument setup.  So if we are
     not careful we could get the wrong value for an argument.

     To avoid this problem we go ahead and emit code to copy OBJECT
     and SIZE into new pseudos.  We can then place those new pseudos
     into an RTL_EXPR and use them later, even after a call to
     emit_queue.

     Note this is not strictly needed for library calls since they
     do not call emit_queue before loading their arguments.  However,
     we may need to have library calls call emit_queue in the future
     since failing to do so could cause problems for targets which
     define SMALL_REGISTER_CLASSES and pass arguments in registers.  */

  object = copy_to_mode_reg (Pmode, XEXP (object, 0));

  if (TARGET_MEM_FUNCTIONS)
    size_mode = TYPE_MODE (sizetype);
  else
    size_mode = TYPE_MODE (unsigned_type_node);
  size = convert_to_mode (size_mode, size, 1);
  size = copy_to_mode_reg (size_mode, size);

  /* It is incorrect to use the libcall calling conventions to call
     memset in this context.  This could be a user call to memset and
     the user may wish to examine the return value from memset.  For
     targets where libcalls and normal calls have different conventions
     for returning pointers, we could end up generating incorrect code.

     For convenience, we generate the call to bzero this way as well.  */

  object_tree = make_tree (ptr_type_node, object);
  if (TARGET_MEM_FUNCTIONS)
    size_tree = make_tree (sizetype, size);
  else
    size_tree = make_tree (unsigned_type_node, size);

  fn = clear_storage_libcall_fn (true);
  arg_list = tree_cons (NULL_TREE, size_tree, NULL_TREE);
  if (TARGET_MEM_FUNCTIONS)
    arg_list = tree_cons (NULL_TREE, integer_zero_node, arg_list);
  arg_list = tree_cons (NULL_TREE, object_tree, arg_list);

  /* Now we have to build up the CALL_EXPR itself.  */
  call_expr = build1 (ADDR_EXPR, build_pointer_type (TREE_TYPE (fn)), fn);
  call_expr = build (CALL_EXPR, TREE_TYPE (TREE_TYPE (fn)),
                     call_expr, arg_list, NULL_TREE);

  retval = expand_expr (call_expr, NULL_RTX, VOIDmode, 0);

  /* If we are initializing a readonly value, show the above call
     clobbered it.  Otherwise, a load from it may erroneously be
     hoisted from a loop.  */
  if (RTX_UNCHANGING_P (object))
    emit_insn (gen_rtx_CLOBBER (VOIDmode, object));

  return (TARGET_MEM_FUNCTIONS ? retval : NULL_RTX);
}

/* A subroutine of clear_storage_via_libcall.  Create the tree node
   for the function we use for block clears.  The first time FOR_CALL
   is true, we call assemble_external.  */

static GTY(()) tree block_clear_fn;

void
init_block_clear_fn (const char *asmspec)
{
  if (!block_clear_fn)
    {
      tree fn, args;

      if (TARGET_MEM_FUNCTIONS)
        {
          fn = get_identifier ("memset");
          args = build_function_type_list (ptr_type_node, ptr_type_node,
                                           integer_type_node, sizetype,
                                           NULL_TREE);
        }
      else
        {
          fn = get_identifier ("bzero");
          args = build_function_type_list (void_type_node, ptr_type_node,
                                           unsigned_type_node, NULL_TREE);
        }

      fn = build_decl (FUNCTION_DECL, fn, args);
      DECL_EXTERNAL (fn) = 1;
      TREE_PUBLIC (fn) = 1;
      DECL_ARTIFICIAL (fn) = 1;
      TREE_NOTHROW (fn) = 1;

      block_clear_fn = fn;
    }

  if (asmspec)
    {
      SET_DECL_RTL (block_clear_fn, NULL_RTX);
      SET_DECL_ASSEMBLER_NAME (block_clear_fn, get_identifier (asmspec));
    }
}

static tree
clear_storage_libcall_fn (int for_call)
{
  static bool emitted_extern;

  if (!block_clear_fn)
    init_block_clear_fn (NULL);

  if (for_call && !emitted_extern)
    {
      emitted_extern = true;
      make_decl_rtl (block_clear_fn, NULL);
      assemble_external (block_clear_fn);
    }

  return block_clear_fn;
}
\f
/* Generate code to copy Y into X.
   Both Y and X must have the same mode, except that
   Y can be a constant with VOIDmode.
   This mode cannot be BLKmode; use emit_block_move for that.

   Return the last instruction emitted.  */

rtx
emit_move_insn (rtx x, rtx y)
{
  enum machine_mode mode = GET_MODE (x);
  rtx y_cst = NULL_RTX;
  rtx last_insn, set;

  x = protect_from_queue (x, 1);
  y = protect_from_queue (y, 0);

  if (mode == BLKmode || (GET_MODE (y) != mode && GET_MODE (y) != VOIDmode))
    abort ();

  /* Never force constant_p_rtx to memory.  */
  if (GET_CODE (y) == CONSTANT_P_RTX)
    ;
  else if (CONSTANT_P (y))
    {
      if (optimize
          && SCALAR_FLOAT_MODE_P (GET_MODE (x))
          && (last_insn = compress_float_constant (x, y)))
        return last_insn;

      y_cst = y;

      if (!LEGITIMATE_CONSTANT_P (y))
        {
          y = force_const_mem (mode, y);

          /* If the target's cannot_force_const_mem prevented the spill,
             assume that the target's move expanders will also take care
             of the non-legitimate constant.  */
          if (!y)
            y = y_cst;
        }
    }

  /* If X or Y are memory references, verify that their addresses are valid
     for the machine.  */
  if (GET_CODE (x) == MEM
      && ((! memory_address_p (GET_MODE (x), XEXP (x, 0))
           && ! push_operand (x, GET_MODE (x)))
          || (flag_force_addr
              && CONSTANT_ADDRESS_P (XEXP (x, 0)))))
    x = validize_mem (x);

  if (GET_CODE (y) == MEM
      && (! memory_address_p (GET_MODE (y), XEXP (y, 0))
          || (flag_force_addr
              && CONSTANT_ADDRESS_P (XEXP (y, 0)))))
    y = validize_mem (y);

  if (mode == BLKmode)
    abort ();

  last_insn = emit_move_insn_1 (x, y);

  if (y_cst && GET_CODE (x) == REG
      && (set = single_set (last_insn)) != NULL_RTX
      && SET_DEST (set) == x
      && ! rtx_equal_p (y_cst, SET_SRC (set)))
    set_unique_reg_note (last_insn, REG_EQUAL, y_cst);

  return last_insn;
}

/* Low level part of emit_move_insn.
   Called just like emit_move_insn, but assumes X and Y
   are basically valid.  */

rtx
emit_move_insn_1 (rtx x, rtx y)
{
  enum machine_mode mode = GET_MODE (x);
  enum machine_mode submode;
  enum mode_class class = GET_MODE_CLASS (mode);

  if ((unsigned int) mode >= (unsigned int) MAX_MACHINE_MODE)
    abort ();

  if (mov_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
    return
      emit_insn (GEN_FCN (mov_optab->handlers[(int) mode].insn_code) (x, y));

  /* Expand complex moves by moving real part and imag part, if possible.  */
  else if ((class == MODE_COMPLEX_FLOAT || class == MODE_COMPLEX_INT)
           && BLKmode != (submode = GET_MODE_INNER (mode))
           && (mov_optab->handlers[(int) submode].insn_code
               != CODE_FOR_nothing))
    {
      /* Don't split destination if it is a stack push.  */
      int stack = push_operand (x, GET_MODE (x));

#ifdef PUSH_ROUNDING
      /* In case we output to the stack, but the size is smaller than the
         machine can push exactly, we need to use move instructions.  */
      if (stack
          && (PUSH_ROUNDING (GET_MODE_SIZE (submode))
              != GET_MODE_SIZE (submode)))
        {
          rtx temp;
          HOST_WIDE_INT offset1, offset2;

          /* Do not use anti_adjust_stack, since we don't want to update
             stack_pointer_delta.  */
          temp = expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
                               sub_optab,
#else
                               add_optab,
#endif
                               stack_pointer_rtx,
                               GEN_INT
                                 (PUSH_ROUNDING
                                  (GET_MODE_SIZE (GET_MODE (x)))),
                               stack_pointer_rtx, 0, OPTAB_LIB_WIDEN);

          if (temp != stack_pointer_rtx)
            emit_move_insn (stack_pointer_rtx, temp);

#ifdef STACK_GROWS_DOWNWARD
          offset1 = 0;
          offset2 = GET_MODE_SIZE (submode);
#else
          offset1 = -PUSH_ROUNDING (GET_MODE_SIZE (GET_MODE (x)));
          offset2 = (-PUSH_ROUNDING (GET_MODE_SIZE (GET_MODE (x)))
                     + GET_MODE_SIZE (submode));
#endif

          emit_move_insn (change_address (x, submode,
                                          gen_rtx_PLUS (Pmode,
                                                        stack_pointer_rtx,
                                                        GEN_INT (offset1))),
                          gen_realpart (submode, y));
          emit_move_insn (change_address (x, submode,
                                          gen_rtx_PLUS (Pmode,
                                                        stack_pointer_rtx,
                                                        GEN_INT (offset2))),
                          gen_imagpart (submode, y));
        }
      else
#endif
      /* If this is a stack, push the highpart first, so it
         will be in the argument order.

         In that case, change_address is used only to convert
         the mode, not to change the address.  */
      if (stack)
        {
          /* Note that the real part always precedes the imag part in memory
             regardless of machine's endianness.  */
#ifdef STACK_GROWS_DOWNWARD
          emit_move_insn (gen_rtx_MEM (submode, XEXP (x, 0)),
                          gen_imagpart (submode, y));
          emit_move_insn (gen_rtx_MEM (submode, XEXP (x, 0)),
                          gen_realpart (submode, y));
#else
          emit_move_insn (gen_rtx_MEM (submode, XEXP (x, 0)),
                          gen_realpart (submode, y));
          emit_move_insn (gen_rtx_MEM (submode, XEXP (x, 0)),
                          gen_imagpart (submode, y));
#endif
        }
      else
        {
          rtx realpart_x, realpart_y;
          rtx imagpart_x, imagpart_y;

          /* If this is a complex value with each part being smaller than a
             word, the usual calling sequence will likely pack the pieces into
             a single register.  Unfortunately, SUBREG of hard registers only
             deals in terms of words, so we have a problem converting input
             arguments to the CONCAT of two registers that is used elsewhere
             for complex values.  If this is before reload, we can copy it into
             memory and reload.  FIXME, we should see about using extract and
             insert on integer registers, but complex short and complex char
             variables should be rarely used.  */
          if (GET_MODE_BITSIZE (mode) < 2 * BITS_PER_WORD
              && (reload_in_progress | reload_completed) == 0)
            {
              int packed_dest_p
                = (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER);
              int packed_src_p
                = (REG_P (y) && REGNO (y) < FIRST_PSEUDO_REGISTER);

              if (packed_dest_p || packed_src_p)
                {
                  enum mode_class reg_class = ((class == MODE_COMPLEX_FLOAT)
                                               ? MODE_FLOAT : MODE_INT);

                  enum machine_mode reg_mode
                    = mode_for_size (GET_MODE_BITSIZE (mode), reg_class, 1);

                  if (reg_mode != BLKmode)
                    {
                      rtx mem = assign_stack_temp (reg_mode,
                                                   GET_MODE_SIZE (mode), 0);
                      rtx cmem = adjust_address (mem, mode, 0);

                      cfun->cannot_inline
                        = N_("function using short complex types cannot be inline");

                      if (packed_dest_p)
                        {
                          rtx sreg = gen_rtx_SUBREG (reg_mode, x, 0);

                          emit_move_insn_1 (cmem, y);
                          return emit_move_insn_1 (sreg, mem);
                        }
                      else
                        {
                          rtx sreg = gen_rtx_SUBREG (reg_mode, y, 0);

                          emit_move_insn_1 (mem, sreg);
                          return emit_move_insn_1 (x, cmem);
                        }
                    }
                }
            }

          realpart_x = gen_realpart (submode, x);
          realpart_y = gen_realpart (submode, y);
          imagpart_x = gen_imagpart (submode, x);
          imagpart_y = gen_imagpart (submode, y);

          /* Show the output dies here.  This is necessary for SUBREGs
             of pseudos since we cannot track their lifetimes correctly;
             hard regs shouldn't appear here except as return values.
             We never want to emit such a clobber after reload.  */
          if (x != y
              && ! (reload_in_progress || reload_completed)
              && (GET_CODE (realpart_x) == SUBREG
                  || GET_CODE (imagpart_x) == SUBREG))
            emit_insn (gen_rtx_CLOBBER (VOIDmode, x));

          emit_move_insn (realpart_x, realpart_y);
          emit_move_insn (imagpart_x, imagpart_y);
        }

      return get_last_insn ();
    }

  /* Handle MODE_CC modes:  If we don't have a special move insn for this mode,
     find a mode to do it in.  If we have a movcc, use it.  Otherwise,
     find the MODE_INT mode of the same width.  */
  else if (GET_MODE_CLASS (mode) == MODE_CC
           && mov_optab->handlers[(int) mode].insn_code == CODE_FOR_nothing)
    {
      enum insn_code insn_code;
      enum machine_mode tmode = VOIDmode;
      rtx x1 = x, y1 = y;

      if (mode != CCmode
          && mov_optab->handlers[(int) CCmode].insn_code != CODE_FOR_nothing)
        tmode = CCmode;
      else
        for (tmode = QImode; tmode != VOIDmode;
             tmode = GET_MODE_WIDER_MODE (tmode))
          if (GET_MODE_SIZE (tmode) == GET_MODE_SIZE (mode))
            break;

      if (tmode == VOIDmode)
        abort ();

      /* Get X and Y in TMODE.  We can't use gen_lowpart here because it
         may call change_address which is not appropriate if we were
         called when a reload was in progress.  We don't have to worry
         about changing the address since the size in bytes is supposed to
         be the same.  Copy the MEM to change the mode and move any
         substitutions from the old MEM to the new one.  */

      if (reload_in_progress)
        {
          x = gen_lowpart_common (tmode, x1);
          if (x == 0 && GET_CODE (x1) == MEM)
            {
              x = adjust_address_nv (x1, tmode, 0);
              copy_replacements (x1, x);
            }

          y = gen_lowpart_common (tmode, y1);
          if (y == 0 && GET_CODE (y1) == MEM)
            {
              y = adjust_address_nv (y1, tmode, 0);
              copy_replacements (y1, y);
            }
        }
      else
        {
          x = gen_lowpart (tmode, x);
          y = gen_lowpart (tmode, y);
        }

      insn_code = mov_optab->handlers[(int) tmode].insn_code;
      return emit_insn (GEN_FCN (insn_code) (x, y));
    }

  /* Try using a move pattern for the corresponding integer mode.  This is
     only safe when simplify_subreg can convert MODE constants into integer
     constants.  At present, it can only do this reliably if the value
     fits within a HOST_WIDE_INT.  */
  else if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
           && (submode = int_mode_for_mode (mode)) != BLKmode
           && mov_optab->handlers[submode].insn_code != CODE_FOR_nothing)
    return emit_insn (GEN_FCN (mov_optab->handlers[submode].insn_code)
                      (simplify_gen_subreg (submode, x, mode, 0),
                       simplify_gen_subreg (submode, y, mode, 0)));

  /* This will handle any multi-word or full-word mode that lacks a move_insn
     pattern.  However, you will get better code if you define such patterns,
     even if they must turn into multiple assembler instructions.  */
  else if (GET_MODE_SIZE (mode) >= UNITS_PER_WORD)
    {
      rtx last_insn = 0;
      rtx seq, inner;
      int need_clobber;
      int i;

#ifdef PUSH_ROUNDING

      /* If X is a push on the stack, do the push now and replace
         X with a reference to the stack pointer.  */
      if (push_operand (x, GET_MODE (x)))
        {
          rtx temp;
          enum rtx_code code;

          /* Do not use anti_adjust_stack, since we don't want to update
             stack_pointer_delta.  */
          temp = expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
                               sub_optab,
#else
                               add_optab,
#endif
                               stack_pointer_rtx,
                               GEN_INT
                                 (PUSH_ROUNDING
                                  (GET_MODE_SIZE (GET_MODE (x)))),
                               stack_pointer_rtx, 0, OPTAB_LIB_WIDEN);

          if (temp != stack_pointer_rtx)
            emit_move_insn (stack_pointer_rtx, temp);

          code = GET_CODE (XEXP (x, 0));

          /* Just hope that small offsets off SP are OK.  */
          if (code == POST_INC)
            temp = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
                                GEN_INT (-((HOST_WIDE_INT)
                                           GET_MODE_SIZE (GET_MODE (x)))));
          else if (code == POST_DEC)
            temp = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
                                GEN_INT (GET_MODE_SIZE (GET_MODE (x))));
          else
            temp = stack_pointer_rtx;

          x = change_address (x, VOIDmode, temp);
        }
#endif

      /* If we are in reload, see if either operand is a MEM whose address
         is scheduled for replacement.  */
      if (reload_in_progress && GET_CODE (x) == MEM
          && (inner = find_replacement (&XEXP (x, 0))) != XEXP (x, 0))
        x = replace_equiv_address_nv (x, inner);
      if (reload_in_progress && GET_CODE (y) == MEM
          && (inner = find_replacement (&XEXP (y, 0))) != XEXP (y, 0))
        y = replace_equiv_address_nv (y, inner);

      start_sequence ();

      need_clobber = 0;
      for (i = 0;
           i < (GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD;
           i++)
        {
          rtx xpart = operand_subword (x, i, 1, mode);
          rtx ypart = operand_subword (y, i, 1, mode);

          /* If we can't get a part of Y, put Y into memory if it is a
             constant.  Otherwise, force it into a register.  If we still
             can't get a part of Y, abort.  */
          if (ypart == 0 && CONSTANT_P (y))
            {
              y = force_const_mem (mode, y);
              ypart = operand_subword (y, i, 1, mode);
            }
          else if (ypart == 0)
            ypart = operand_subword_force (y, i, mode);

          if (xpart == 0 || ypart == 0)
            abort ();

          need_clobber |= (GET_CODE (xpart) == SUBREG);

          last_insn = emit_move_insn (xpart, ypart);
        }

      seq = get_insns ();
      end_sequence ();

      /* Show the output dies here.  This is necessary for SUBREGs
         of pseudos since we cannot track their lifetimes correctly;
         hard regs shouldn't appear here except as return values.
         We never want to emit such a clobber after reload.  */
      if (x != y
          && ! (reload_in_progress || reload_completed)
          && need_clobber != 0)
        emit_insn (gen_rtx_CLOBBER (VOIDmode, x));

      emit_insn (seq);

      return last_insn;
    }
  else
    abort ();
}

/* If Y is representable exactly in a narrower mode, and the target can
   perform the extension directly from constant or memory, then emit the
   move as an extension.  */

static rtx
compress_float_constant (rtx x, rtx y)
{
  enum machine_mode dstmode = GET_MODE (x);
  enum machine_mode orig_srcmode = GET_MODE (y);
  enum machine_mode srcmode;
  REAL_VALUE_TYPE r;

  REAL_VALUE_FROM_CONST_DOUBLE (r, y);

  for (srcmode = GET_CLASS_NARROWEST_MODE (GET_MODE_CLASS (orig_srcmode));
       srcmode != orig_srcmode;
       srcmode = GET_MODE_WIDER_MODE (srcmode))
    {
      enum insn_code ic;
      rtx trunc_y, last_insn;

      /* Skip if the target can't extend this way.  */
      ic = can_extend_p (dstmode, srcmode, 0);
      if (ic == CODE_FOR_nothing)
        continue;

      /* Skip if the narrowed value isn't exact.  */
      if (! exact_real_truncate (srcmode, &r))
        continue;

      trunc_y = CONST_DOUBLE_FROM_REAL_VALUE (r, srcmode);

      if (LEGITIMATE_CONSTANT_P (trunc_y))
        {
          /* Skip if the target needs extra instructions to perform
             the extension.  */
          if (! (*insn_data[ic].operand[1].predicate) (trunc_y, srcmode))
            continue;
        }
      else if (float_extend_from_mem[dstmode][srcmode])
        trunc_y = validize_mem (force_const_mem (srcmode, trunc_y));
      else
        continue;

      emit_unop_insn (ic, x, trunc_y, UNKNOWN);
      last_insn = get_last_insn ();

      if (GET_CODE (x) == REG)
        set_unique_reg_note (last_insn, REG_EQUAL, y);

      return last_insn;
    }

  return NULL_RTX;
}
\f
/* Pushing data onto the stack.  */

/* Push a block of length SIZE (perhaps variable)
   and return an rtx to address the beginning of the block.
   Note that it is not possible for the value returned to be a QUEUED.
   The value may be virtual_outgoing_args_rtx.

   EXTRA is the number of bytes of padding to push in addition to SIZE.
   BELOW nonzero means this padding comes at low addresses;
   otherwise, the padding comes at high addresses.  */

rtx
push_block (rtx size, int extra, int below)
{
  rtx temp;

  size = convert_modes (Pmode, ptr_mode, size, 1);
  if (CONSTANT_P (size))
    anti_adjust_stack (plus_constant (size, extra));
  else if (GET_CODE (size) == REG && extra == 0)
    anti_adjust_stack (size);
  else
    {
      temp = copy_to_mode_reg (Pmode, size);
      if (extra != 0)
        temp = expand_binop (Pmode, add_optab, temp, GEN_INT (extra),
                             temp, 0, OPTAB_LIB_WIDEN);
      anti_adjust_stack (temp);
    }

#ifndef STACK_GROWS_DOWNWARD
  if (0)
#else
  if (1)
#endif
    {
      temp = virtual_outgoing_args_rtx;
      if (extra != 0 && below)
        temp = plus_constant (temp, extra);
    }
  else
    {
      if (GET_CODE (size) == CONST_INT)
        temp = plus_constant (virtual_outgoing_args_rtx,
                              -INTVAL (size) - (below ? 0 : extra));
      else if (extra != 0 && !below)
        temp = gen_rtx_PLUS (Pmode, virtual_outgoing_args_rtx,
                             negate_rtx (Pmode, plus_constant (size, extra)));
      else
        temp = gen_rtx_PLUS (Pmode, virtual_outgoing_args_rtx,
                             negate_rtx (Pmode, size));
    }

  return memory_address (GET_CLASS_NARROWEST_MODE (MODE_INT), temp);
}

#ifdef PUSH_ROUNDING

/* Emit single push insn.  */

static void
emit_single_push_insn (enum machine_mode mode, rtx x, tree type)
{
  rtx dest_addr;
  unsigned rounded_size = PUSH_ROUNDING (GET_MODE_SIZE (mode));
  rtx dest;
  enum insn_code icode;
  insn_operand_predicate_fn pred;

  stack_pointer_delta += PUSH_ROUNDING (GET_MODE_SIZE (mode));
  /* If there is push pattern, use it.  Otherwise try old way of throwing
     MEM representing push operation to move expander.  */
  icode = push_optab->handlers[(int) mode].insn_code;
  if (icode != CODE_FOR_nothing)
    {
      if (((pred = insn_data[(int) icode].operand[0].predicate)
           && !((*pred) (x, mode))))
        x = force_reg (mode, x);
      emit_insn (GEN_FCN (icode) (x));
      return;
    }
  if (GET_MODE_SIZE (mode) == rounded_size)
    dest_addr = gen_rtx_fmt_e (STACK_PUSH_CODE, Pmode, stack_pointer_rtx);
  /* If we are to pad downward, adjust the stack pointer first and
     then store X into the stack location using an offset.  This is
     because emit_move_insn does not know how to pad; it does not have
     access to type.  */
  else if (FUNCTION_ARG_PADDING (mode, type) == downward)
    {
      unsigned padding_size = rounded_size - GET_MODE_SIZE (mode);
      HOST_WIDE_INT offset;

      emit_move_insn (stack_pointer_rtx,
                      expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
                                    sub_optab,
#else
                                    add_optab,
#endif
                                    stack_pointer_rtx,
                                    GEN_INT (rounded_size),
                                    NULL_RTX, 0, OPTAB_LIB_WIDEN));

      offset = (HOST_WIDE_INT) padding_size;
#ifdef STACK_GROWS_DOWNWARD
      if (STACK_PUSH_CODE == POST_DEC)
        /* We have already decremented the stack pointer, so get the
           previous value.  */
        offset += (HOST_WIDE_INT) rounded_size;
#else
      if (STACK_PUSH_CODE == POST_INC)
        /* We have already incremented the stack pointer, so get the
           previous value.  */
        offset -= (HOST_WIDE_INT) rounded_size;
#endif
      dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx, GEN_INT (offset));
    }
  else
    {
#ifdef STACK_GROWS_DOWNWARD
      /* ??? This seems wrong if STACK_PUSH_CODE == POST_DEC.  */
      dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
                                GEN_INT (-(HOST_WIDE_INT) rounded_size));
#else
      /* ??? This seems wrong if STACK_PUSH_CODE == POST_INC.  */
      dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
                                GEN_INT (rounded_size));
#endif
      dest_addr = gen_rtx_PRE_MODIFY (Pmode, stack_pointer_rtx, dest_addr);
    }

  dest = gen_rtx_MEM (mode, dest_addr);

  if (type != 0)
    {
      set_mem_attributes (dest, type, 1);

      if (flag_optimize_sibling_calls)
        /* Function incoming arguments may overlap with sibling call
           outgoing arguments and we cannot allow reordering of reads
           from function arguments with stores to outgoing arguments
           of sibling calls.  */
        set_mem_alias_set (dest, 0);
    }
  emit_move_insn (dest, x);
}
#endif

/* Generate code to push X onto the stack, assuming it has mode MODE and
   type TYPE.
   MODE is redundant except when X is a CONST_INT (since they don't
   carry mode info).
   SIZE is an rtx for the size of data to be copied (in bytes),
   needed only if X is BLKmode.

   ALIGN (in bits) is maximum alignment we can assume.

   If PARTIAL and REG are both nonzero, then copy that many of the first
   words of X into registers starting with REG, and push the rest of X.
   The amount of space pushed is decreased by PARTIAL words,
   rounded *down* to a multiple of PARM_BOUNDARY.
   REG must be a hard register in this case.
   If REG is zero but PARTIAL is not, take any all others actions for an
   argument partially in registers, but do not actually load any
   registers.

   EXTRA is the amount in bytes of extra space to leave next to this arg.
   This is ignored if an argument block has already been allocated.

   On a machine that lacks real push insns, ARGS_ADDR is the address of
   the bottom of the argument block for this call.  We use indexing off there
   to store the arg.  On machines with push insns, ARGS_ADDR is 0 when a
   argument block has not been preallocated.

   ARGS_SO_FAR is the size of args previously pushed for this call.

   REG_PARM_STACK_SPACE is nonzero if functions require stack space
   for arguments passed in registers.  If nonzero, it will be the number
   of bytes required.  */

void
emit_push_insn (rtx x, enum machine_mode mode, tree type, rtx size,
                unsigned int align, int partial, rtx reg, int extra,
                rtx args_addr, rtx args_so_far, int reg_parm_stack_space,
                rtx alignment_pad)
{
  rtx xinner;
  enum direction stack_direction
#ifdef STACK_GROWS_DOWNWARD
    = downward;
#else
    = upward;
#endif

  /* Decide where to pad the argument: `downward' for below,
     `upward' for above, or `none' for don't pad it.
     Default is below for small data on big-endian machines; else above.  */
  enum direction where_pad = FUNCTION_ARG_PADDING (mode, type);

  /* Invert direction if stack is post-decrement.
     FIXME: why?  */
  if (STACK_PUSH_CODE == POST_DEC)
    if (where_pad != none)
      where_pad = (where_pad == downward ? upward : downward);

  xinner = x = protect_from_queue (x, 0);

  if (mode == BLKmode)
    {
      /* Copy a block into the stack, entirely or partially.  */

      rtx temp;
      int used = partial * UNITS_PER_WORD;
      int offset;
      int skip;

      if (reg && GET_CODE (reg) == PARALLEL)
        {
          /* Use the size of the elt to compute offset.  */
          rtx elt = XEXP (XVECEXP (reg, 0, 0), 0);
          used = partial * GET_MODE_SIZE (GET_MODE (elt));
          offset = used % (PARM_BOUNDARY / BITS_PER_UNIT);
        }
      else
        offset = used % (PARM_BOUNDARY / BITS_PER_UNIT);

      if (size == 0)
        abort ();

      used -= offset;

      /* USED is now the # of bytes we need not copy to the stack
         because registers will take care of them.  */

      if (partial != 0)
        xinner = adjust_address (xinner, BLKmode, used);

      /* If the partial register-part of the arg counts in its stack size,
         skip the part of stack space corresponding to the registers.
         Otherwise, start copying to the beginning of the stack space,
         by setting SKIP to 0.  */
      skip = (reg_parm_stack_space == 0) ? 0 : used;

#ifdef PUSH_ROUNDING
      /* Do it with several push insns if that doesn't take lots of insns
         and if there is no difficulty with push insns that skip bytes
         on the stack for alignment purposes.  */
      if (args_addr == 0
          && PUSH_ARGS
          && GET_CODE (size) == CONST_INT
          && skip == 0
          && MEM_ALIGN (xinner) >= align
          && (MOVE_BY_PIECES_P ((unsigned) INTVAL (size) - used, align))
          /* Here we avoid the case of a structure whose weak alignment
             forces many pushes of a small amount of data,
             and such small pushes do rounding that causes trouble.  */
          && ((! SLOW_UNALIGNED_ACCESS (word_mode, align))
              || align >= BIGGEST_ALIGNMENT
              || (PUSH_ROUNDING (align / BITS_PER_UNIT)
                  == (align / BITS_PER_UNIT)))
          && PUSH_ROUNDING (INTVAL (size)) == INTVAL (size))
        {
          /* Push padding now if padding above and stack grows down,
             or if padding below and stack grows up.
             But if space already allocated, this has already been done.  */
          if (extra && args_addr == 0
              && where_pad != none && where_pad != stack_direction)
            anti_adjust_stack (GEN_INT (extra));

          move_by_pieces (NULL, xinner, INTVAL (size) - used, align, 0);
        }
      else
#endif /* PUSH_ROUNDING  */
        {
          rtx target;

          /* Otherwise make space on the stack and copy the data
             to the address of that space.  */

          /* Deduct words put into registers from the size we must copy.  */
          if (partial != 0)
            {
              if (GET_CODE (size) == CONST_INT)
                size = GEN_INT (INTVAL (size) - used);
              else
                size = expand_binop (GET_MODE (size), sub_optab, size,
                                     GEN_INT (used), NULL_RTX, 0,
                                     OPTAB_LIB_WIDEN);
            }

          /* Get the address of the stack space.
             In this case, we do not deal with EXTRA separately.
             A single stack adjust will do.  */
          if (! args_addr)
            {
              temp = push_block (size, extra, where_pad == downward);
              extra = 0;
            }
          else if (GET_CODE (args_so_far) == CONST_INT)
            temp = memory_address (BLKmode,
                                   plus_constant (args_addr,
                                                  skip + INTVAL (args_so_far)));
          else
            temp = memory_address (BLKmode,
                                   plus_constant (gen_rtx_PLUS (Pmode,
                                                                args_addr,
                                                                args_so_far),
                                                  skip));

          if (!ACCUMULATE_OUTGOING_ARGS)
            {
              /* If the source is referenced relative to the stack pointer,
                 copy it to another register to stabilize it.  We do not need
                 to do this if we know that we won't be changing sp.  */

              if (reg_mentioned_p (virtual_stack_dynamic_rtx, temp)
                  || reg_mentioned_p (virtual_outgoing_args_rtx, temp))
                temp = copy_to_reg (temp);
            }

          target = gen_rtx_MEM (BLKmode, temp);

          if (type != 0)
            {
              set_mem_attributes (target, type, 1);
              /* Function incoming arguments may overlap with sibling call
                 outgoing arguments and we cannot allow reordering of reads
                 from function arguments with stores to outgoing arguments
                 of sibling calls.  */
              set_mem_alias_set (target, 0);
            }

          /* ALIGN may well be better aligned than TYPE, e.g. due to
             PARM_BOUNDARY.  Assume the caller isn't lying.  */
          set_mem_align (target, align);

          emit_block_move (target, xinner, size, BLOCK_OP_CALL_PARM);
        }
    }
  else if (partial > 0)
    {
      /* Scalar partly in registers.  */

      int size = GET_MODE_SIZE (mode) / UNITS_PER_WORD;
      int i;
      int not_stack;
      /* # words of start of argument
         that we must make space for but need not store.  */
      int offset = partial % (PARM_BOUNDARY / BITS_PER_WORD);
      int args_offset = INTVAL (args_so_far);
      int skip;

      /* Push padding now if padding above and stack grows down,
         or if padding below and stack grows up.
         But if space already allocated, this has already been done.  */
      if (extra && args_addr == 0
          && where_pad != none && where_pad != stack_direction)
        anti_adjust_stack (GEN_INT (extra));

      /* If we make space by pushing it, we might as well push
         the real data.  Otherwise, we can leave OFFSET nonzero
         and leave the space uninitialized.  */
      if (args_addr == 0)
        offset = 0;

      /* Now NOT_STACK gets the number of words that we don't need to
         allocate on the stack.  */
      not_stack = partial - offset;

      /* If the partial register-part of the arg counts in its stack size,
         skip the part of stack space corresponding to the registers.
         Otherwise, start copying to the beginning of the stack space,
         by setting SKIP to 0.  */
      skip = (reg_parm_stack_space == 0) ? 0 : not_stack;

      if (CONSTANT_P (x) && ! LEGITIMATE_CONSTANT_P (x))
        x = validize_mem (force_const_mem (mode, x));

      /* If X is a hard register in a non-integer mode, copy it into a pseudo;
         SUBREGs of such registers are not allowed.  */
      if ((GET_CODE (x) == REG && REGNO (x) < FIRST_PSEUDO_REGISTER
           && GET_MODE_CLASS (GET_MODE (x)) != MODE_INT))
        x = copy_to_reg (x);

      /* Loop over all the words allocated on the stack for this arg.  */
      /* We can do it by words, because any scalar bigger than a word
         has a size a multiple of a word.  */
#ifndef PUSH_ARGS_REVERSED
      for (i = not_stack; i < size; i++)
#else
      for (i = size - 1; i >= not_stack; i--)
#endif
        if (i >= not_stack + offset)
          emit_push_insn (operand_subword_force (x, i, mode),
                          word_mode, NULL_TREE, NULL_RTX, align, 0, NULL_RTX,
                          0, args_addr,
                          GEN_INT (args_offset + ((i - not_stack + skip)
                                                  * UNITS_PER_WORD)),
                          reg_parm_stack_space, alignment_pad);
    }
  else
    {
      rtx addr;
      rtx dest;

      /* Push padding now if padding above and stack grows down,
         or if padding below and stack grows up.
         But if space already allocated, this has already been done.  */
      if (extra && args_addr == 0
          && where_pad != none && where_pad != stack_direction)
        anti_adjust_stack (GEN_INT (extra));

#ifdef PUSH_ROUNDING
      if (args_addr == 0 && PUSH_ARGS)
        emit_single_push_insn (mode, x, type);
      else
#endif
        {
          if (GET_CODE (args_so_far) == CONST_INT)
            addr
              = memory_address (mode,
                                plus_constant (args_addr,
                                               INTVAL (args_so_far)));
          else
            addr = memory_address (mode, gen_rtx_PLUS (Pmode, args_addr,
                                                       args_so_far));
          dest = gen_rtx_MEM (mode, addr);
          if (type != 0)
            {
              set_mem_attributes (dest, type, 1);
              /* Function incoming arguments may overlap with sibling call
                 outgoing arguments and we cannot allow reordering of reads
                 from function arguments with stores to outgoing arguments
                 of sibling calls.  */
              set_mem_alias_set (dest, 0);
            }

          emit_move_insn (dest, x);
        }
    }

  /* If part should go in registers, copy that part
     into the appropriate registers.  Do this now, at the end,
     since mem-to-mem copies above may do function calls.  */
  if (partial > 0 && reg != 0)
    {
      /* Handle calls that pass values in multiple non-contiguous locations.
         The Irix 6 ABI has examples of this.  */
      if (GET_CODE (reg) == PARALLEL)
        emit_group_load (reg, x, type, -1);
      else
        move_block_to_reg (REGNO (reg), x, partial, mode);
    }

  if (extra && args_addr == 0 && where_pad == stack_direction)
    anti_adjust_stack (GEN_INT (extra));

  if (alignment_pad && args_addr == 0)
    anti_adjust_stack (alignment_pad);
}
\f
/* Return X if X can be used as a subtarget in a sequence of arithmetic
   operations.  */

static rtx
get_subtarget (rtx x)
{
  return ((x == 0
           /* Only registers can be subtargets.  */
           || GET_CODE (x) != REG
           /* If the register is readonly, it can't be set more than once.  */
           || RTX_UNCHANGING_P (x)
           /* Don't use hard regs to avoid extending their life.  */
           || REGNO (x) < FIRST_PSEUDO_REGISTER
           /* Avoid subtargets inside loops,
              since they hide some invariant expressions.  */
           || preserve_subexpressions_p ())
          ? 0 : x);
}

/* Expand an assignment that stores the value of FROM into TO.
   If WANT_VALUE is nonzero, return an rtx for the value of TO.
   (This may contain a QUEUED rtx;
   if the value is constant, this rtx is a constant.)
   Otherwise, the returned value is NULL_RTX.  */

rtx
expand_assignment (tree to, tree from, int want_value)
{
  rtx to_rtx = 0;
  rtx result;

  /* Don't crash if the lhs of the assignment was erroneous.  */

  if (TREE_CODE (to) == ERROR_MARK)
    {
      result = expand_expr (from, NULL_RTX, VOIDmode, 0);
      return want_value ? result : NULL_RTX;
    }

  /* Assignment of a structure component needs special treatment
     if the structure component's rtx is not simply a MEM.
     Assignment of an array element at a constant index, and assignment of
     an array element in an unaligned packed structure field, has the same
     problem.  */

  if (TREE_CODE (to) == COMPONENT_REF || TREE_CODE (to) == BIT_FIELD_REF
      || TREE_CODE (to) == ARRAY_REF || TREE_CODE (to) == ARRAY_RANGE_REF
      || TREE_CODE (TREE_TYPE (to)) == ARRAY_TYPE)
    {
      enum machine_mode mode1;
      HOST_WIDE_INT bitsize, bitpos;
      rtx orig_to_rtx;
      tree offset;
      int unsignedp;
      int volatilep = 0;
      tree tem;

      push_temp_slots ();
      tem = get_inner_reference (to, &bitsize, &bitpos, &offset, &mode1,
                                 &unsignedp, &volatilep);

      /* If we are going to use store_bit_field and extract_bit_field,
         make sure to_rtx will be safe for multiple use.  */

      if (mode1 == VOIDmode && want_value)
        tem = stabilize_reference (tem);

      orig_to_rtx = to_rtx = expand_expr (tem, NULL_RTX, VOIDmode, 0);

      if (offset != 0)
        {
          rtx offset_rtx = expand_expr (offset, NULL_RTX, VOIDmode, EXPAND_SUM);

          if (GET_CODE (to_rtx) != MEM)
            abort ();

#ifdef POINTERS_EXTEND_UNSIGNED
          if (GET_MODE (offset_rtx) != Pmode)
            offset_rtx = convert_to_mode (Pmode, offset_rtx, 0);
#else
          if (GET_MODE (offset_rtx) != ptr_mode)
            offset_rtx = convert_to_mode (ptr_mode, offset_rtx, 0);
#endif

          /* A constant address in TO_RTX can have VOIDmode, we must not try
             to call force_reg for that case.  Avoid that case.  */
          if (GET_CODE (to_rtx) == MEM
              && GET_MODE (to_rtx) == BLKmode
              && GET_MODE (XEXP (to_rtx, 0)) != VOIDmode
              && bitsize > 0
              && (bitpos % bitsize) == 0
              && (bitsize % GET_MODE_ALIGNMENT (mode1)) == 0
              && MEM_ALIGN (to_rtx) == GET_MODE_ALIGNMENT (mode1))
            {
              to_rtx = adjust_address (to_rtx, mode1, bitpos / BITS_PER_UNIT);
              bitpos = 0;
            }

          to_rtx = offset_address (to_rtx, offset_rtx,
                                   highest_pow2_factor_for_type (TREE_TYPE (to),
                                                                 offset));
        }

      if (GET_CODE (to_rtx) == MEM)
        {
          /* If the field is at offset zero, we could have been given the
             DECL_RTX of the parent struct.  Don't munge it.  */
          to_rtx = shallow_copy_rtx (to_rtx);

          set_mem_attributes_minus_bitpos (to_rtx, to, 0, bitpos);
        }

      /* Deal with volatile and readonly fields.  The former is only done
         for MEM.  Also set MEM_KEEP_ALIAS_SET_P if needed.  */
      if (volatilep && GET_CODE (to_rtx) == MEM)
        {
          if (to_rtx == orig_to_rtx)
            to_rtx = copy_rtx (to_rtx);
          MEM_VOLATILE_P (to_rtx) = 1;
        }

      if (TREE_CODE (to) == COMPONENT_REF
          && TREE_READONLY (TREE_OPERAND (to, 1))
          /* We can't assert that a MEM won't be set more than once
             if the component is not addressable because another
             non-addressable component may be referenced by the same MEM.  */
          && ! (GET_CODE (to_rtx) == MEM && ! can_address_p (to)))
        {
          if (to_rtx == orig_to_rtx)
            to_rtx = copy_rtx (to_rtx);
          RTX_UNCHANGING_P (to_rtx) = 1;
        }

      if (GET_CODE (to_rtx) == MEM && ! can_address_p (to))
        {
          if (to_rtx == orig_to_rtx)
            to_rtx = copy_rtx (to_rtx);
          MEM_KEEP_ALIAS_SET_P (to_rtx) = 1;
        }

      result = store_field (to_rtx, bitsize, bitpos, mode1, from,
                            (want_value
                             /* Spurious cast for HPUX compiler.  */
                             ? ((enum machine_mode)
                                TYPE_MODE (TREE_TYPE (to)))
                             : VOIDmode),
                            unsignedp, TREE_TYPE (tem), get_alias_set (to));

      preserve_temp_slots (result);
      free_temp_slots ();
      pop_temp_slots ();

      /* If the value is meaningful, convert RESULT to the proper mode.
         Otherwise, return nothing.  */
      return (want_value ? convert_modes (TYPE_MODE (TREE_TYPE (to)),
                                          TYPE_MODE (TREE_TYPE (from)),
                                          result,
                                          TREE_UNSIGNED (TREE_TYPE (to)))
              : NULL_RTX);
    }

  /* If the rhs is a function call and its value is not an aggregate,
     call the function before we start to compute the lhs.
     This is needed for correct code for cases such as
     val = setjmp (buf) on machines where reference to val
     requires loading up part of an address in a separate insn.

     Don't do this if TO is a VAR_DECL or PARM_DECL whose DECL_RTL is REG
     since it might be a promoted variable where the zero- or sign- extension
     needs to be done.  Handling this in the normal way is safe because no
     computation is done before the call.  */
  if (TREE_CODE (from) == CALL_EXPR && ! aggregate_value_p (from, from)
      && TREE_CODE (TYPE_SIZE (TREE_TYPE (from))) == INTEGER_CST
      && ! ((TREE_CODE (to) == VAR_DECL || TREE_CODE (to) == PARM_DECL)
            && GET_CODE (DECL_RTL (to)) == REG))
    {
      rtx value;

      push_temp_slots ();
      value = expand_expr (from, NULL_RTX, VOIDmode, 0);
      if (to_rtx == 0)
        to_rtx = expand_expr (to, NULL_RTX, VOIDmode, EXPAND_WRITE);

      /* Handle calls that return values in multiple non-contiguous locations.
         The Irix 6 ABI has examples of this.  */
      if (GET_CODE (to_rtx) == PARALLEL)
        emit_group_load (to_rtx, value, TREE_TYPE (from),
                         int_size_in_bytes (TREE_TYPE (from)));
      else if (GET_MODE (to_rtx) == BLKmode)
        emit_block_move (to_rtx, value, expr_size (from), BLOCK_OP_NORMAL);
      else
        {
          if (POINTER_TYPE_P (TREE_TYPE (to)))
            value = convert_memory_address (GET_MODE (to_rtx), value);
          emit_move_insn (to_rtx, value);
        }
      preserve_temp_slots (to_rtx);
      free_temp_slots ();
      pop_temp_slots ();
      return want_value ? to_rtx : NULL_RTX;
    }

  /* Ordinary treatment.  Expand TO to get a REG or MEM rtx.
     Don't re-expand if it was expanded already (in COMPONENT_REF case).  */

  if (to_rtx == 0)
    to_rtx = expand_expr (to, NULL_RTX, VOIDmode, EXPAND_WRITE);

  /* Don't move directly into a return register.  */
  if (TREE_CODE (to) == RESULT_DECL
      && (GET_CODE (to_rtx) == REG || GET_CODE (to_rtx) == PARALLEL))
    {
      rtx temp;

      push_temp_slots ();
      temp = expand_expr (from, 0, GET_MODE (to_rtx), 0);

      if (GET_CODE (to_rtx) == PARALLEL)
        emit_group_load (to_rtx, temp, TREE_TYPE (from),
                         int_size_in_bytes (TREE_TYPE (from)));
      else
        emit_move_insn (to_rtx, temp);

      preserve_temp_slots (to_rtx);
      free_temp_slots ();
      pop_temp_slots ();
      return want_value ? to_rtx : NULL_RTX;
    }

  /* In case we are returning the contents of an object which overlaps
     the place the value is being stored, use a safe function when copying
     a value through a pointer into a structure value return block.  */
  if (TREE_CODE (to) == RESULT_DECL && TREE_CODE (from) == INDIRECT_REF
      && current_function_returns_struct
      && !current_function_returns_pcc_struct)
    {
      rtx from_rtx, size;

      push_temp_slots ();
      size = expr_size (from);
      from_rtx = expand_expr (from, NULL_RTX, VOIDmode, 0);

      if (TARGET_MEM_FUNCTIONS)
        emit_library_call (memmove_libfunc, LCT_NORMAL,
                           VOIDmode, 3, XEXP (to_rtx, 0), Pmode,
                           XEXP (from_rtx, 0), Pmode,
                           convert_to_mode (TYPE_MODE (sizetype),
                                            size, TREE_UNSIGNED (sizetype)),
                           TYPE_MODE (sizetype));
      else
        emit_library_call (bcopy_libfunc, LCT_NORMAL,
                           VOIDmode, 3, XEXP (from_rtx, 0), Pmode,
                           XEXP (to_rtx, 0), Pmode,
                           convert_to_mode (TYPE_MODE (integer_type_node),
                                            size,
                                            TREE_UNSIGNED (integer_type_node)),
                           TYPE_MODE (integer_type_node));

      preserve_temp_slots (to_rtx);
      free_temp_slots ();
      pop_temp_slots ();
      return want_value ? to_rtx : NULL_RTX;
    }

  /* Compute FROM and store the value in the rtx we got.  */

  push_temp_slots ();
  result = store_expr (from, to_rtx, want_value);
  preserve_temp_slots (result);
  free_temp_slots ();
  pop_temp_slots ();
  return want_value ? result : NULL_RTX;
}

/* Generate code for computing expression EXP,
   and storing the value into TARGET.
   TARGET may contain a QUEUED rtx.

   If WANT_VALUE & 1 is nonzero, return a copy of the value
   not in TARGET, so that we can be sure to use the proper
   value in a containing expression even if TARGET has something
   else stored in it.  If possible, we copy the value through a pseudo
   and return that pseudo.  Or, if the value is constant, we try to
   return the constant.  In some cases, we return a pseudo
   copied *from* TARGET.

   If the mode is BLKmode then we may return TARGET itself.
   It turns out that in BLKmode it doesn't cause a problem.
   because C has no operators that could combine two different
   assignments into the same BLKmode object with different values
   with no sequence point.  Will other languages need this to
   be more thorough?

   If WANT_VALUE & 1 is 0, we return NULL, to make sure
   to catch quickly any cases where the caller uses the value
   and fails to set WANT_VALUE.

   If WANT_VALUE & 2 is set, this is a store into a call param on the
   stack, and block moves may need to be treated specially.  */

rtx
store_expr (tree exp, rtx target, int want_value)
{
  rtx temp;
  rtx alt_rtl = NULL_RTX;
  int dont_return_target = 0;
  int dont_store_target = 0;

  if (VOID_TYPE_P (TREE_TYPE (exp)))
    {
      /* C++ can generate ?: expressions with a throw expression in one
         branch and an rvalue in the other. Here, we resolve attempts to
         store the throw expression's nonexistent result.  */
      if (want_value)
        abort ();
      expand_expr (exp, const0_rtx, VOIDmode, 0);
      return NULL_RTX;
    }
  if (TREE_CODE (exp) == COMPOUND_EXPR)
    {
      /* Perform first part of compound expression, then assign from second
         part.  */
      expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode,
                   want_value & 2 ? EXPAND_STACK_PARM : EXPAND_NORMAL);
      emit_queue ();
      return store_expr (TREE_OPERAND (exp, 1), target, want_value);
    }
  else if (TREE_CODE (exp) == COND_EXPR && GET_MODE (target) == BLKmode)
    {
      /* For conditional expression, get safe form of the target.  Then
         test the condition, doing the appropriate assignment on either
         side.  This avoids the creation of unnecessary temporaries.
         For non-BLKmode, it is more efficient not to do this.  */

      rtx lab1 = gen_label_rtx (), lab2 = gen_label_rtx ();

      emit_queue ();
      target = protect_from_queue (target, 1);

      do_pending_stack_adjust ();
      NO_DEFER_POP;
      jumpifnot (TREE_OPERAND (exp, 0), lab1);
      start_cleanup_deferral ();
      store_expr (TREE_OPERAND (exp, 1), target, want_value & 2);
      end_cleanup_deferral ();
      emit_queue ();
      emit_jump_insn (gen_jump (lab2));
      emit_barrier ();
      emit_label (lab1);
      start_cleanup_deferral ();
      store_expr (TREE_OPERAND (exp, 2), target, want_value & 2);
      end_cleanup_deferral ();
      emit_queue ();
      emit_label (lab2);
      OK_DEFER_POP;

      return want_value & 1 ? target : NULL_RTX;
    }
  else if (queued_subexp_p (target))
    /* If target contains a postincrement, let's not risk
       using it as the place to generate the rhs.  */
    {
      if (GET_MODE (target) != BLKmode && GET_MODE (target) != VOIDmode)
        {
          /* Expand EXP into a new pseudo.  */
          temp = gen_reg_rtx (GET_MODE (target));
          temp = expand_expr (exp, temp, GET_MODE (target),
                              (want_value & 2
                               ? EXPAND_STACK_PARM : EXPAND_NORMAL));
        }
      else
        temp = expand_expr (exp, NULL_RTX, GET_MODE (target),
                            (want_value & 2
                             ? EXPAND_STACK_PARM : EXPAND_NORMAL));

      /* If target is volatile, ANSI requires accessing the value
         *from* the target, if it is accessed.  So make that happen.
         In no case return the target itself.  */
      if (! MEM_VOLATILE_P (target) && (want_value & 1) != 0)
        dont_return_target = 1;
    }
  else if ((want_value & 1) != 0
           && GET_CODE (target) == MEM
           && ! MEM_VOLATILE_P (target)
           && GET_MODE (target) != BLKmode)
    /* If target is in memory and caller wants value in a register instead,
       arrange that.  Pass TARGET as target for expand_expr so that,
       if EXP is another assignment, WANT_VALUE will be nonzero for it.
       We know expand_expr will not use the target in that case.
       Don't do this if TARGET is volatile because we are supposed
       to write it and then read it.  */
    {
      temp = expand_expr (exp, target, GET_MODE (target),
                          want_value & 2 ? EXPAND_STACK_PARM : EXPAND_NORMAL);
      if (GET_MODE (temp) != BLKmode && GET_MODE (temp) != VOIDmode)
        {
          /* If TEMP is already in the desired TARGET, only copy it from
             memory and don't store it there again.  */
          if (temp == target
              || (rtx_equal_p (temp, target)
                  && ! side_effects_p (temp) && ! side_effects_p (target)))
            dont_store_target = 1;
          temp = copy_to_reg (temp);
        }
      dont_return_target = 1;
    }
  else if (GET_CODE (target) == SUBREG && SUBREG_PROMOTED_VAR_P (target))
    /* If this is a scalar in a register that is stored in a wider mode
       than the declared mode, compute the result into its declared mode
       and then convert to the wider mode.  Our value is the computed
       expression.  */
    {
      rtx inner_target = 0;

      /* If we don't want a value, we can do the conversion inside EXP,
         which will often result in some optimizations.  Do the conversion
         in two steps: first change the signedness, if needed, then
         the extend.  But don't do this if the type of EXP is a subtype
         of something else since then the conversion might involve
         more than just converting modes.  */
      if ((want_value & 1) == 0
          && INTEGRAL_TYPE_P (TREE_TYPE (exp))
          && TREE_TYPE (TREE_TYPE (exp)) == 0)
        {
          if (TREE_UNSIGNED (TREE_TYPE (exp))
              != SUBREG_PROMOTED_UNSIGNED_P (target))
            exp = convert
              ((*lang_hooks.types.signed_or_unsigned_type)
               (SUBREG_PROMOTED_UNSIGNED_P (target), TREE_TYPE (exp)), exp);

          exp = convert ((*lang_hooks.types.type_for_mode)
                         (GET_MODE (SUBREG_REG (target)),
                          SUBREG_PROMOTED_UNSIGNED_P (target)),
                         exp);

          inner_target = SUBREG_REG (target);
        }

      temp = expand_expr (exp, inner_target, VOIDmode,
                          want_value & 2 ? EXPAND_STACK_PARM : EXPAND_NORMAL);

      /* If TEMP is a MEM and we want a result value, make the access
         now so it gets done only once.  Strictly speaking, this is
         only necessary if the MEM is volatile, or if the address
         overlaps TARGET.  But not performing the load twice also
         reduces the amount of rtl we generate and then have to CSE.  */
      if (GET_CODE (temp) == MEM && (want_value & 1) != 0)
        temp = copy_to_reg (temp);

      /* If TEMP is a VOIDmode constant, use convert_modes to make
         sure that we properly convert it.  */
      if (CONSTANT_P (temp) && GET_MODE (temp) == VOIDmode)
        {
          temp = convert_modes (GET_MODE (target), TYPE_MODE (TREE_TYPE (exp)),
                                temp, SUBREG_PROMOTED_UNSIGNED_P (target));
          temp = convert_modes (GET_MODE (SUBREG_REG (target)),
                                GET_MODE (target), temp,
                                SUBREG_PROMOTED_UNSIGNED_P (target));
        }

      convert_move (SUBREG_REG (target), temp,
                    SUBREG_PROMOTED_UNSIGNED_P (target));

      /* If we promoted a constant, change the mode back down to match
         target.  Otherwise, the caller might get confused by a result whose
         mode is larger than expected.  */

      if ((want_value & 1) != 0 && GET_MODE (temp) != GET_MODE (target))
        {
          if (GET_MODE (temp) != VOIDmode)
            {
              temp = gen_lowpart_SUBREG (GET_MODE (target), temp);
              SUBREG_PROMOTED_VAR_P (temp) = 1;
              SUBREG_PROMOTED_UNSIGNED_SET (temp,
                SUBREG_PROMOTED_UNSIGNED_P (target));
            }
          else
            temp = convert_modes (GET_MODE (target),
                                  GET_MODE (SUBREG_REG (target)),
                                  temp, SUBREG_PROMOTED_UNSIGNED_P (target));
        }

      return want_value & 1 ? temp : NULL_RTX;
    }
  else
    {
      temp = expand_expr_real (exp, target, GET_MODE (target),
                               (want_value & 2 
                                ? EXPAND_STACK_PARM : EXPAND_NORMAL),
                               &alt_rtl);
      /* Return TARGET if it's a specified hardware register.
         If TARGET is a volatile mem ref, either return TARGET
         or return a reg copied *from* TARGET; ANSI requires this.

         Otherwise, if TEMP is not TARGET, return TEMP
         if it is constant (for efficiency),
         or if we really want the correct value.  */
      if (!(target && GET_CODE (target) == REG
            && REGNO (target) < FIRST_PSEUDO_REGISTER)
          && !(GET_CODE (target) == MEM && MEM_VOLATILE_P (target))
          && ! rtx_equal_p (temp, target)
          && (CONSTANT_P (temp) || (want_value & 1) != 0))
        dont_return_target = 1;
    }

  /* If TEMP is a VOIDmode constant and the mode of the type of EXP is not
     the same as that of TARGET, adjust the constant.  This is needed, for
     example, in case it is a CONST_DOUBLE and we want only a word-sized
     value.  */
  if (CONSTANT_P (temp) && GET_MODE (temp) == VOIDmode
      && TREE_CODE (exp) != ERROR_MARK
      && GET_MODE (target) != TYPE_MODE (TREE_TYPE (exp)))
    temp = convert_modes (GET_MODE (target), TYPE_MODE (TREE_TYPE (exp)),
                          temp, TREE_UNSIGNED (TREE_TYPE (exp)));

  /* If value was not generated in the target, store it there.
     Convert the value to TARGET's type first if necessary.
     If TEMP and TARGET compare equal according to rtx_equal_p, but
     one or both of them are volatile memory refs, we have to distinguish
     two cases:
     - expand_expr has used TARGET.  In this case, we must not generate
       another copy.  This can be detected by TARGET being equal according
       to == .
     - expand_expr has not used TARGET - that means that the source just
       happens to have the same RTX form.  Since temp will have been created
       by expand_expr, it will compare unequal according to == .
       We must generate a copy in this case, to reach the correct number
       of volatile memory references.  */

  if ((! rtx_equal_p (temp, target)
       || (temp != target && (side_effects_p (temp)
                              || side_effects_p (target))))
      && TREE_CODE (exp) != ERROR_MARK
      && ! dont_store_target
      /* If store_expr stores a DECL whose DECL_RTL(exp) == TARGET,
         but TARGET is not valid memory reference, TEMP will differ
         from TARGET although it is really the same location.  */
      && !(alt_rtl && rtx_equal_p (alt_rtl, target))
      /* If there's nothing to copy, don't bother.  Don't call expr_size
         unless necessary, because some front-ends (C++) expr_size-hook
         aborts on objects that are not supposed to be bit-copied or
         bit-initialized.  */
      && expr_size (exp) != const0_rtx)
    {
      target = protect_from_queue (target, 1);
      if (GET_MODE (temp) != GET_MODE (target)
          && GET_MODE (temp) != VOIDmode)
        {
          int unsignedp = TREE_UNSIGNED (TREE_TYPE (exp));
          if (dont_return_target)
            {
              /* In this case, we will return TEMP,
                 so make sure it has the proper mode.
                 But don't forget to store the value into TARGET.  */
              temp = convert_to_mode (GET_MODE (target), temp, unsignedp);
              emit_move_insn (target, temp);
            }
          else
            convert_move (target, temp, unsignedp);
        }

      else if (GET_MODE (temp) == BLKmode && TREE_CODE (exp) == STRING_CST)
        {
          /* Handle copying a string constant into an array.  The string
             constant may be shorter than the array.  So copy just the string's
             actual length, and clear the rest.  First get the size of the data
             type of the string, which is actually the size of the target.  */
          rtx size = expr_size (exp);

          if (GET_CODE (size) == CONST_INT
              && INTVAL (size) < TREE_STRING_LENGTH (exp))
            emit_block_move (target, temp, size,
                             (want_value & 2
                              ? BLOCK_OP_CALL_PARM : BLOCK_OP_NORMAL));
          else
            {
              /* Compute the size of the data to copy from the string.  */
              tree copy_size
                = size_binop (MIN_EXPR,
                              make_tree (sizetype, size),
                              size_int (TREE_STRING_LENGTH (exp)));
              rtx copy_size_rtx
                = expand_expr (copy_size, NULL_RTX, VOIDmode,
                               (want_value & 2
                                ? EXPAND_STACK_PARM : EXPAND_NORMAL));
              rtx label = 0;

              /* Copy that much.  */
              copy_size_rtx = convert_to_mode (ptr_mode, copy_size_rtx,
                                               TREE_UNSIGNED (sizetype));
              emit_block_move (target, temp, copy_size_rtx,
                               (want_value & 2
                                ? BLOCK_OP_CALL_PARM : BLOCK_OP_NORMAL));

              /* Figure out how much is left in TARGET that we have to clear.
                 Do all calculations in ptr_mode.  */
              if (GET_CODE (copy_size_rtx) == CONST_INT)
                {
                  size = plus_constant (size, -INTVAL (copy_size_rtx));
                  target = adjust_address (target, BLKmode,
                                           INTVAL (copy_size_rtx));
                }
              else
                {
                  size = expand_binop (TYPE_MODE (sizetype), sub_optab, size,
                                       copy_size_rtx, NULL_RTX, 0,
                                       OPTAB_LIB_WIDEN);

#ifdef POINTERS_EXTEND_UNSIGNED
                  if (GET_MODE (copy_size_rtx) != Pmode)
                    copy_size_rtx = convert_to_mode (Pmode, copy_size_rtx,
                                                     TREE_UNSIGNED (sizetype));
#endif

                  target = offset_address (target, copy_size_rtx,
                                           highest_pow2_factor (copy_size));
                  label = gen_label_rtx ();
                  emit_cmp_and_jump_insns (size, const0_rtx, LT, NULL_RTX,
                                           GET_MODE (size), 0, label);
                }

              if (size != const0_rtx)
                clear_storage (target, size);

              if (label)
                emit_label (label);
            }
        }
      /* Handle calls that return values in multiple non-contiguous locations.
         The Irix 6 ABI has examples of this.  */
      else if (GET_CODE (target) == PARALLEL)
        emit_group_load (target, temp, TREE_TYPE (exp),
                         int_size_in_bytes (TREE_TYPE (exp)));
      else if (GET_MODE (temp) == BLKmode)
        emit_block_move (target, temp, expr_size (exp),
                         (want_value & 2
                          ? BLOCK_OP_CALL_PARM : BLOCK_OP_NORMAL));
      else
        {
          temp = force_operand (temp, target);
          if (temp != target)
            emit_move_insn (target, temp);
        }
    }

  /* If we don't want a value, return NULL_RTX.  */
  if ((want_value & 1) == 0)
    return NULL_RTX;

  /* If we are supposed to return TEMP, do so as long as it isn't a MEM.
     ??? The latter test doesn't seem to make sense.  */
  else if (dont_return_target && GET_CODE (temp) != MEM)
    return temp;

  /* Return TARGET itself if it is a hard register.  */
  else if ((want_value & 1) != 0
           && GET_MODE (target) != BLKmode
           && ! (GET_CODE (target) == REG
                 && REGNO (target) < FIRST_PSEUDO_REGISTER))
    return copy_to_reg (target);

  else
    return target;
}
\f
/* Return 1 if EXP just contains zeros.  FIXME merge with initializer_zerop.  */

static int
is_zeros_p (tree exp)
{
  tree elt;

  switch (TREE_CODE (exp))
    {
    case CONVERT_EXPR:
    case NOP_EXPR:
    case NON_LVALUE_EXPR:
    case VIEW_CONVERT_EXPR:
      return is_zeros_p (TREE_OPERAND (exp, 0));

    case INTEGER_CST:
      return integer_zerop (exp);

    case COMPLEX_CST:
      return
        is_zeros_p (TREE_REALPART (exp)) && is_zeros_p (TREE_IMAGPART (exp));

    case REAL_CST:
      return REAL_VALUES_IDENTICAL (TREE_REAL_CST (exp), dconst0);

    case VECTOR_CST:
      for (elt = TREE_VECTOR_CST_ELTS (exp); elt;
           elt = TREE_CHAIN (elt))
        if (!is_zeros_p (TREE_VALUE (elt)))
          return 0;

      return 1;

    case CONSTRUCTOR:
      if (TREE_TYPE (exp) && TREE_CODE (TREE_TYPE (exp)) == SET_TYPE)
        return CONSTRUCTOR_ELTS (exp) == NULL_TREE;
      for (elt = CONSTRUCTOR_ELTS (exp); elt; elt = TREE_CHAIN (elt))
        if (! is_zeros_p (TREE_VALUE (elt)))
          return 0;

      return 1;

    default:
      return 0;
    }
}

/* Return 1 if EXP contains mostly (3/4)  zeros.  */

int
mostly_zeros_p (tree exp)
{
  if (TREE_CODE (exp) == CONSTRUCTOR)
    {
      int elts = 0, zeros = 0;
      tree elt = CONSTRUCTOR_ELTS (exp);
      if (TREE_TYPE (exp) && TREE_CODE (TREE_TYPE (exp)) == SET_TYPE)
        {
          /* If there are no ranges of true bits, it is all zero.  */
          return elt == NULL_TREE;
        }
      for (; elt; elt = TREE_CHAIN (elt))
        {
          /* We do not handle the case where the index is a RANGE_EXPR,
             so the statistic will be somewhat inaccurate.
             We do make a more accurate count in store_constructor itself,
             so since this function is only used for nested array elements,
             this should be close enough.  */
          if (mostly_zeros_p (TREE_VALUE (elt)))
            zeros++;
          elts++;
        }

      return 4 * zeros >= 3 * elts;
    }

  return is_zeros_p (exp);
}
\f
/* Helper function for store_constructor.
   TARGET, BITSIZE, BITPOS, MODE, EXP are as for store_field.
   TYPE is the type of the CONSTRUCTOR, not the element type.
   CLEARED is as for store_constructor.
   ALIAS_SET is the alias set to use for any stores.

   This provides a recursive shortcut back to store_constructor when it isn't
   necessary to go through store_field.  This is so that we can pass through
   the cleared field to let store_constructor know that we may not have to
   clear a substructure if the outer structure has already been cleared.  */

static void
store_constructor_field (rtx target, unsigned HOST_WIDE_INT bitsize,
                         HOST_WIDE_INT bitpos, enum machine_mode mode,
                         tree exp, tree type, int cleared, int alias_set)
{
  if (TREE_CODE (exp) == CONSTRUCTOR
      && bitpos % BITS_PER_UNIT == 0
      /* If we have a nonzero bitpos for a register target, then we just
         let store_field do the bitfield handling.  This is unlikely to
         generate unnecessary clear instructions anyways.  */
      && (bitpos == 0 || GET_CODE (target) == MEM))
    {
      if (GET_CODE (target) == MEM)
        target
          = adjust_address (target,
                            GET_MODE (target) == BLKmode
                            || 0 != (bitpos
                                     % GET_MODE_ALIGNMENT (GET_MODE (target)))
                            ? BLKmode : VOIDmode, bitpos / BITS_PER_UNIT);


      /* Update the alias set, if required.  */
      if (GET_CODE (target) == MEM && ! MEM_KEEP_ALIAS_SET_P (target)
          && MEM_ALIAS_SET (target) != 0)
        {
          target = copy_rtx (target);
          set_mem_alias_set (target, alias_set);
        }

      store_constructor (exp, target, cleared, bitsize / BITS_PER_UNIT);
    }
  else
    store_field (target, bitsize, bitpos, mode, exp, VOIDmode, 0, type,
                 alias_set);
}

/* Store the value of constructor EXP into the rtx TARGET.
   TARGET is either a REG or a MEM; we know it cannot conflict, since
   safe_from_p has been called.
   CLEARED is true if TARGET is known to have been zero'd.
   SIZE is the number of bytes of TARGET we are allowed to modify: this
   may not be the same as the size of EXP if we are assigning to a field
   which has been packed to exclude padding bits.  */

static void
store_constructor (tree exp, rtx target, int cleared, HOST_WIDE_INT size)
{
  tree type = TREE_TYPE (exp);
#ifdef WORD_REGISTER_OPERATIONS
  HOST_WIDE_INT exp_size = int_size_in_bytes (type);
#endif

  if (TREE_CODE (type) == RECORD_TYPE || TREE_CODE (type) == UNION_TYPE
      || TREE_CODE (type) == QUAL_UNION_TYPE)
    {
      tree elt;

      /* If size is zero or the target is already cleared, do nothing.  */
      if (size == 0 || cleared)
        cleared = 1;
      /* We either clear the aggregate or indicate the value is dead.  */
      else if ((TREE_CODE (type) == UNION_TYPE
                || TREE_CODE (type) == QUAL_UNION_TYPE)
               && ! CONSTRUCTOR_ELTS (exp))
        /* If the constructor is empty, clear the union.  */
        {
          clear_storage (target, expr_size (exp));
          cleared = 1;
        }

      /* If we are building a static constructor into a register,
         set the initial value as zero so we can fold the value into
         a constant.  But if more than one register is involved,
         this probably loses.  */
      else if (GET_CODE (target) == REG && TREE_STATIC (exp)
               && GET_MODE_SIZE (GET_MODE (target)) <= UNITS_PER_WORD)
        {
          emit_move_insn (target, CONST0_RTX (GET_MODE (target)));
          cleared = 1;
        }

      /* If the constructor has fewer fields than the structure
         or if we are initializing the structure to mostly zeros,
         clear the whole structure first.  Don't do this if TARGET is a
         register whose mode size isn't equal to SIZE since clear_storage
         can't handle this case.  */
      else if (((list_length (CONSTRUCTOR_ELTS (exp)) != fields_length (type))
                || mostly_zeros_p (exp))
               && (GET_CODE (target) != REG
                   || ((HOST_WIDE_INT) GET_MODE_SIZE (GET_MODE (target))
                       == size)))
        {
          rtx xtarget = target;

          if (readonly_fields_p (type))
            {
              xtarget = copy_rtx (xtarget);
              RTX_UNCHANGING_P (xtarget) = 1;
            }

          clear_storage (xtarget, GEN_INT (size));
          cleared = 1;
        }

      if (! cleared)
        emit_insn (gen_rtx_CLOBBER (VOIDmode, target));

      /* Store each element of the constructor into
         the corresponding field of TARGET.  */

      for (elt = CONSTRUCTOR_ELTS (exp); elt; elt = TREE_CHAIN (elt))
        {
          tree field = TREE_PURPOSE (elt);
          tree value = TREE_VALUE (elt);
          enum machine_mode mode;
          HOST_WIDE_INT bitsize;
          HOST_WIDE_INT bitpos = 0;
          tree offset;
          rtx to_rtx = target;

          /* Just ignore missing fields.
             We cleared the whole structure, above,
             if any fields are missing.  */
          if (field == 0)
            continue;

          if (cleared && is_zeros_p (value))
            continue;

          if (host_integerp (DECL_SIZE (field), 1))
            bitsize = tree_low_cst (DECL_SIZE (field), 1);
          else
            bitsize = -1;

          mode = DECL_MODE (field);
          if (DECL_BIT_FIELD (field))
            mode = VOIDmode;

          offset = DECL_FIELD_OFFSET (field);
          if (host_integerp (offset, 0)
              && host_integerp (bit_position (field), 0))
            {
              bitpos = int_bit_position (field);
              offset = 0;
            }
          else
            bitpos = tree_low_cst (DECL_FIELD_BIT_OFFSET (field), 0);

          if (offset)
            {
              rtx offset_rtx;

              if (CONTAINS_PLACEHOLDER_P (offset))
                offset = build (WITH_RECORD_EXPR, sizetype,
                                offset, make_tree (TREE_TYPE (exp), target));

              offset_rtx = expand_expr (offset, NULL_RTX, VOIDmode, 0);
              if (GET_CODE (to_rtx) != MEM)
                abort ();

#ifdef POINTERS_EXTEND_UNSIGNED
              if (GET_MODE (offset_rtx) != Pmode)
                offset_rtx = convert_to_mode (Pmode, offset_rtx, 0);
#else
              if (GET_MODE (offset_rtx) != ptr_mode)
                offset_rtx = convert_to_mode (ptr_mode, offset_rtx, 0);
#endif

              to_rtx = offset_address (to_rtx, offset_rtx,
                                       highest_pow2_factor (offset));
            }

          if (TREE_READONLY (field))
            {
              if (GET_CODE (to_rtx) == MEM)
                to_rtx = copy_rtx (to_rtx);

              RTX_UNCHANGING_P (to_rtx) = 1;
            }

#ifdef WORD_REGISTER_OPERATIONS
          /* If this initializes a field that is smaller than a word, at the
             start of a word, try to widen it to a full word.
             This special case allows us to output C++ member function
             initializations in a form that the optimizers can understand.  */
          if (GET_CODE (target) == REG
              && bitsize < BITS_PER_WORD
              && bitpos % BITS_PER_WORD == 0
              && GET_MODE_CLASS (mode) == MODE_INT
              && TREE_CODE (value) == INTEGER_CST
              && exp_size >= 0
              && bitpos + BITS_PER_WORD <= exp_size * BITS_PER_UNIT)
            {
              tree type = TREE_TYPE (value);

              if (TYPE_PRECISION (type) < BITS_PER_WORD)
                {
                  type = (*lang_hooks.types.type_for_size)
                    (BITS_PER_WORD, TREE_UNSIGNED (type));
                  value = convert (type, value);
                }

              if (BYTES_BIG_ENDIAN)
                value
                  = fold (build (LSHIFT_EXPR, type, value,
                                 build_int_2 (BITS_PER_WORD - bitsize, 0)));
              bitsize = BITS_PER_WORD;
              mode = word_mode;
            }
#endif

          if (GET_CODE (to_rtx) == MEM && !MEM_KEEP_ALIAS_SET_P (to_rtx)
              && DECL_NONADDRESSABLE_P (field))
            {
              to_rtx = copy_rtx (to_rtx);
              MEM_KEEP_ALIAS_SET_P (to_rtx) = 1;
            }

          store_constructor_field (to_rtx, bitsize, bitpos, mode,
                                   value, type, cleared,
                                   get_alias_set (TREE_TYPE (field)));
        }
    }
  else if (TREE_CODE (type) == ARRAY_TYPE
           || TREE_CODE (type) == VECTOR_TYPE)
    {
      tree elt;
      int i;
      int need_to_clear;
      tree domain = TYPE_DOMAIN (type);
      tree elttype = TREE_TYPE (type);
      int const_bounds_p;
      HOST_WIDE_INT minelt = 0;
      HOST_WIDE_INT maxelt = 0;
      int icode = 0;
      rtx *vector = NULL;
      int elt_size = 0;
      unsigned n_elts = 0;

      /* Vectors are like arrays, but the domain is stored via an array
         type indirectly.  */
      if (TREE_CODE (type) == VECTOR_TYPE)
        {
          /* Note that although TYPE_DEBUG_REPRESENTATION_TYPE uses
             the same field as TYPE_DOMAIN, we are not guaranteed that
             it always will.  */
          domain = TYPE_DEBUG_REPRESENTATION_TYPE (type);
          domain = TYPE_DOMAIN (TREE_TYPE (TYPE_FIELDS (domain)));
          if (REG_P (target) && VECTOR_MODE_P (GET_MODE (target)))
            {
              enum machine_mode mode = GET_MODE (target);

              icode = (int) vec_init_optab->handlers[mode].insn_code;
              if (icode != CODE_FOR_nothing)
                {
                  unsigned int i;

                  elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode));
                  n_elts = (GET_MODE_SIZE (mode) / elt_size);
                  vector = alloca (n_elts);
                  for (i = 0; i < n_elts; i++)
                    vector [i] = CONST0_RTX (GET_MODE_INNER (mode));
                }
            }
        }

      const_bounds_p = (TYPE_MIN_VALUE (domain)
                        && TYPE_MAX_VALUE (domain)
                        && host_integerp (TYPE_MIN_VALUE (domain), 0)
                        && host_integerp (TYPE_MAX_VALUE (domain), 0));

      /* If we have constant bounds for the range of the type, get them.  */
      if (const_bounds_p)
        {
          minelt = tree_low_cst (TYPE_MIN_VALUE (domain), 0);
          maxelt = tree_low_cst (TYPE_MAX_VALUE (domain), 0);
        }

      /* If the constructor has fewer elements than the array,
         clear the whole array first.  Similarly if this is
         static constructor of a non-BLKmode object.  */
      if (cleared || (GET_CODE (target) == REG && TREE_STATIC (exp)))
        need_to_clear = 1;
      else
        {
          HOST_WIDE_INT count = 0, zero_count = 0;
          need_to_clear = ! const_bounds_p;

          /* This loop is a more accurate version of the loop in
             mostly_zeros_p (it handles RANGE_EXPR in an index).
             It is also needed to check for missing elements.  */
          for (elt = CONSTRUCTOR_ELTS (exp);
               elt != NULL_TREE && ! need_to_clear;
               elt = TREE_CHAIN (elt))
            {
              tree index = TREE_PURPOSE (elt);
              HOST_WIDE_INT this_node_count;

              if (index != NULL_TREE && TREE_CODE (index) == RANGE_EXPR)
                {
                  tree lo_index = TREE_OPERAND (index, 0);
                  tree hi_index = TREE_OPERAND (index, 1);

                  if (! host_integerp (lo_index, 1)
                      || ! host_integerp (hi_index, 1))
                    {
                      need_to_clear = 1;
                      break;
                    }

                  this_node_count = (tree_low_cst (hi_index, 1)
                                     - tree_low_cst (lo_index, 1) + 1);
                }
              else
                this_node_count = 1;

              count += this_node_count;
              if (mostly_zeros_p (TREE_VALUE (elt)))
                zero_count += this_node_count;
            }

          /* Clear the entire array first if there are any missing elements,
             or if the incidence of zero elements is >= 75%.  */
          if (! need_to_clear
              && (count < maxelt - minelt + 1 || 4 * zero_count >= 3 * count))
            need_to_clear = 1;
        }

      if (need_to_clear && size > 0 && !vector)
        {
          if (! cleared)
            {
              if (REG_P (target))
                emit_move_insn (target,  CONST0_RTX (GET_MODE (target)));
              else
                clear_storage (target, GEN_INT (size));
            }
          cleared = 1;
        }
      else if (REG_P (target))
        /* Inform later passes that the old value is dead.  */
        emit_insn (gen_rtx_CLOBBER (VOIDmode, target));

      /* Store each element of the constructor into
         the corresponding element of TARGET, determined
         by counting the elements.  */
      for (elt = CONSTRUCTOR_ELTS (exp), i = 0;
           elt;
           elt = TREE_CHAIN (elt), i++)
        {
          enum machine_mode mode;
          HOST_WIDE_INT bitsize;
          HOST_WIDE_INT bitpos;
          int unsignedp;
          tree value = TREE_VALUE (elt);
          tree index = TREE_PURPOSE (elt);
          rtx xtarget = target;

          if (cleared && is_zeros_p (value))
            continue;

          unsignedp = TREE_UNSIGNED (elttype);
          mode = TYPE_MODE (elttype);
          if (mode == BLKmode)
            bitsize = (host_integerp (TYPE_SIZE (elttype), 1)
                       ? tree_low_cst (TYPE_SIZE (elttype), 1)
                       : -1);
          else
            bitsize = GET_MODE_BITSIZE (mode);

          if (index != NULL_TREE && TREE_CODE (index) == RANGE_EXPR)
            {
              tree lo_index = TREE_OPERAND (index, 0);
              tree hi_index = TREE_OPERAND (index, 1);
              rtx index_r, pos_rtx, loop_end;
              struct nesting *loop;
              HOST_WIDE_INT lo, hi, count;
              tree position;

              if (vector)
                abort ();

              /* If the range is constant and "small", unroll the loop.  */
              if (const_bounds_p
                  && host_integerp (lo_index, 0)
                  && host_integerp (hi_index, 0)
                  && (lo = tree_low_cst (lo_index, 0),
                      hi = tree_low_cst (hi_index, 0),
                      count = hi - lo + 1,
                      (GET_CODE (target) != MEM
                       || count <= 2
                       || (host_integerp (TYPE_SIZE (elttype), 1)
                           && (tree_low_cst (TYPE_SIZE (elttype), 1) * count
                               <= 40 * 8)))))
                {
                  lo -= minelt;  hi -= minelt;
                  for (; lo <= hi; lo++)
                    {
                      bitpos = lo * tree_low_cst (TYPE_SIZE (elttype), 0);

                      if (GET_CODE (target) == MEM
                          && !MEM_KEEP_ALIAS_SET_P (target)
                          && TREE_CODE (type) == ARRAY_TYPE
                          && TYPE_NONALIASED_COMPONENT (type))
                        {
                          target = copy_rtx (target);
                          MEM_KEEP_ALIAS_SET_P (target) = 1;
                        }

                      store_constructor_field
                        (target, bitsize, bitpos, mode, value, type, cleared,
                         get_alias_set (elttype));
                    }
                }
              else
                {
                  expand_expr (hi_index, NULL_RTX, VOIDmode, 0);
                  loop_end = gen_label_rtx ();

                  unsignedp = TREE_UNSIGNED (domain);

                  index = build_decl (VAR_DECL, NULL_TREE, domain);

                  index_r
                    = gen_reg_rtx (promote_mode (domain, DECL_MODE (index),
                                                 &unsignedp, 0));
                  SET_DECL_RTL (index, index_r);
                  if (TREE_CODE (value) == SAVE_EXPR
                      && SAVE_EXPR_RTL (value) == 0)
                    {
                      /* Make sure value gets expanded once before the
                         loop.  */
                      expand_expr (value, const0_rtx, VOIDmode, 0);
                      emit_queue ();
                    }
                  store_expr (lo_index, index_r, 0);
                  loop = expand_start_loop (0);

                  /* Assign value to element index.  */
                  position
                    = convert (ssizetype,
                               fold (build (MINUS_EXPR, TREE_TYPE (index),
                                            index, TYPE_MIN_VALUE (domain))));
                  position = size_binop (MULT_EXPR, position,
                                         convert (ssizetype,
                                                  TYPE_SIZE_UNIT (elttype)));

                  pos_rtx = expand_expr (position, 0, VOIDmode, 0);
                  xtarget = offset_address (target, pos_rtx,
                                            highest_pow2_factor (position));
                  xtarget = adjust_address (xtarget, mode, 0);
                  if (TREE_CODE (value) == CONSTRUCTOR)
                    store_constructor (value, xtarget, cleared,
                                       bitsize / BITS_PER_UNIT);
                  else
                    store_expr (value, xtarget, 0);

                  expand_exit_loop_if_false (loop,
                                             build (LT_EXPR, integer_type_node,
                                                    index, hi_index));

                  expand_increment (build (PREINCREMENT_EXPR,
                                           TREE_TYPE (index),
                                           index, integer_one_node), 0, 0);
                  expand_end_loop ();
                  emit_label (loop_end);
                }
            }
          else if ((index != 0 && ! host_integerp (index, 0))
                   || ! host_integerp (TYPE_SIZE (elttype), 1))
            {
              tree position;

              if (vector)
                abort ();

              if (index == 0)
                index = ssize_int (1);

              if (minelt)
                index = convert (ssizetype,
                                 fold (build (MINUS_EXPR, index,
                                              TYPE_MIN_VALUE (domain))));

              position = size_binop (MULT_EXPR, index,
                                     convert (ssizetype,
                                              TYPE_SIZE_UNIT (elttype)));
              xtarget = offset_address (target,
                                        expand_expr (position, 0, VOIDmode, 0),
                                        highest_pow2_factor (position));
              xtarget = adjust_address (xtarget, mode, 0);
              store_expr (value, xtarget, 0);
            }
          else if (vector)
            {
              int pos;

              if (index != 0)
                pos = tree_low_cst (index, 0) - minelt;
              else
                pos = i;
              vector[pos] = expand_expr (value, NULL_RTX, VOIDmode, 0);
            }
          else
            {
              if (index != 0)
                bitpos = ((tree_low_cst (index, 0) - minelt)
                          * tree_low_cst (TYPE_SIZE (elttype), 1));
              else
                bitpos = (i * tree_low_cst (TYPE_SIZE (elttype), 1));

              if (GET_CODE (target) == MEM && !MEM_KEEP_ALIAS_SET_P (target)
                  && TREE_CODE (type) == ARRAY_TYPE
                  && TYPE_NONALIASED_COMPONENT (type))
                {
                  target = copy_rtx (target);
                  MEM_KEEP_ALIAS_SET_P (target) = 1;
                }
              store_constructor_field (target, bitsize, bitpos, mode, value,
                                       type, cleared, get_alias_set (elttype));
            }
        }
      if (vector)
        {
          emit_insn (GEN_FCN (icode) (target,
                                      gen_rtx_PARALLEL (GET_MODE (target),
                                                        gen_rtvec_v (n_elts, vector))));
        }
    }

  /* Set constructor assignments.  */
  else if (TREE_CODE (type) == SET_TYPE)
    {
      tree elt = CONSTRUCTOR_ELTS (exp);
      unsigned HOST_WIDE_INT nbytes = int_size_in_bytes (type), nbits;
      tree domain = TYPE_DOMAIN (type);
      tree domain_min, domain_max, bitlength;

      /* The default implementation strategy is to extract the constant
         parts of the constructor, use that to initialize the target,
         and then "or" in whatever non-constant ranges we need in addition.

         If a large set is all zero or all ones, it is
         probably better to set it using memset (if available) or bzero.
         Also, if a large set has just a single range, it may also be
         better to first clear all the first clear the set (using
         bzero/memset), and set the bits we want.  */

      /* Check for all zeros.  */
      if (elt == NULL_TREE && size > 0)
        {
          if (!cleared)
            clear_storage (target, GEN_INT (size));
          return;
        }

      domain_min = convert (sizetype, TYPE_MIN_VALUE (domain));
      domain_max = convert (sizetype, TYPE_MAX_VALUE (domain));
      bitlength = size_binop (PLUS_EXPR,
                              size_diffop (domain_max, domain_min),
                              ssize_int (1));

      nbits = tree_low_cst (bitlength, 1);

      /* For "small" sets, or "medium-sized" (up to 32 bytes) sets that
         are "complicated" (more than one range), initialize (the
         constant parts) by copying from a constant.  */
      if (GET_MODE (target) != BLKmode || nbits <= 2 * BITS_PER_WORD
          || (nbytes <= 32 && TREE_CHAIN (elt) != NULL_TREE))
        {
          unsigned int set_word_size = TYPE_ALIGN (TREE_TYPE (exp));
          enum machine_mode mode = mode_for_size (set_word_size, MODE_INT, 1);
          char *bit_buffer = alloca (nbits);
          HOST_WIDE_INT word = 0;
          unsigned int bit_pos = 0;
          unsigned int ibit = 0;
          unsigned int offset = 0;  /* In bytes from beginning of set.  */

          elt = get_set_constructor_bits (exp, bit_buffer, nbits);
          for (;;)
            {
              if (bit_buffer[ibit])
                {
                  if (BYTES_BIG_ENDIAN)
                    word |= (1 << (set_word_size - 1 - bit_pos));
                  else
                    word |= 1 << bit_pos;
                }

              bit_pos++;  ibit++;
              if (bit_pos >= set_word_size || ibit == nbits)
                {
                  if (word != 0 || ! cleared)
                    {
                      rtx datum = GEN_INT (word);
                      rtx to_rtx;

                      /* The assumption here is that it is safe to use
                         XEXP if the set is multi-word, but not if
                         it's single-word.  */
                      if (GET_CODE (target) == MEM)
                        to_rtx = adjust_address (target, mode, offset);
                      else if (offset == 0)
                        to_rtx = target;
                      else
                        abort ();
                      emit_move_insn (to_rtx, datum);
                    }

                  if (ibit == nbits)
                    break;
                  word = 0;
                  bit_pos = 0;
                  offset += set_word_size / BITS_PER_UNIT;
                }
            }
        }
      else if (!cleared)
        /* Don't bother clearing storage if the set is all ones.  */
        if (TREE_CHAIN (elt) != NULL_TREE
            || (TREE_PURPOSE (elt) == NULL_TREE
                ? nbits != 1
                : ( ! host_integerp (TREE_VALUE (elt), 0)
                   || ! host_integerp (TREE_PURPOSE (elt), 0)
                   || (tree_low_cst (TREE_VALUE (elt), 0)
                       - tree_low_cst (TREE_PURPOSE (elt), 0) + 1
                       != (HOST_WIDE_INT) nbits))))
          clear_storage (target, expr_size (exp));

      for (; elt != NULL_TREE; elt = TREE_CHAIN (elt))
        {
          /* Start of range of element or NULL.  */
          tree startbit = TREE_PURPOSE (elt);
          /* End of range of element, or element value.  */
          tree endbit   = TREE_VALUE (elt);
          HOST_WIDE_INT startb, endb;
          rtx bitlength_rtx, startbit_rtx, endbit_rtx, targetx;

          bitlength_rtx = expand_expr (bitlength,
                                       NULL_RTX, MEM, EXPAND_CONST_ADDRESS);

          /* Handle non-range tuple element like [ expr ].  */
          if (startbit == NULL_TREE)
            {
              startbit = save_expr (endbit);
              endbit = startbit;
            }

          startbit = convert (sizetype, startbit);
          endbit = convert (sizetype, endbit);
          if (! integer_zerop (domain_min))
            {
              startbit = size_binop (MINUS_EXPR, startbit, domain_min);
              endbit = size_binop (MINUS_EXPR, endbit, domain_min);
            }
          startbit_rtx = expand_expr (startbit, NULL_RTX, MEM,
                                      EXPAND_CONST_ADDRESS);
          endbit_rtx = expand_expr (endbit, NULL_RTX, MEM,
                                    EXPAND_CONST_ADDRESS);

          if (REG_P (target))
            {
              targetx
                = assign_temp
                  ((build_qualified_type ((*lang_hooks.types.type_for_mode)
                                          (GET_MODE (target), 0),
                                          TYPE_QUAL_CONST)),
                   0, 1, 1);
              emit_move_insn (targetx, target);
            }

          else if (GET_CODE (target) == MEM)
            targetx = target;
          else
            abort ();

          /* Optimization:  If startbit and endbit are constants divisible
             by BITS_PER_UNIT, call memset instead.  */
          if (TARGET_MEM_FUNCTIONS
              && TREE_CODE (startbit) == INTEGER_CST
              && TREE_CODE (endbit) == INTEGER_CST
              && (startb = TREE_INT_CST_LOW (startbit)) % BITS_PER_UNIT == 0
              && (endb = TREE_INT_CST_LOW (endbit) + 1) % BITS_PER_UNIT == 0)
            {
              emit_library_call (memset_libfunc, LCT_NORMAL,
                                 VOIDmode, 3,
                                 plus_constant (XEXP (targetx, 0),
                                                startb / BITS_PER_UNIT),
                                 Pmode,
                                 constm1_rtx, TYPE_MODE (integer_type_node),
                                 GEN_INT ((endb - startb) / BITS_PER_UNIT),
                                 TYPE_MODE (sizetype));
            }
          else
            emit_library_call (setbits_libfunc, LCT_NORMAL,
                               VOIDmode, 4, XEXP (targetx, 0),
                               Pmode, bitlength_rtx, TYPE_MODE (sizetype),
                               startbit_rtx, TYPE_MODE (sizetype),
                               endbit_rtx, TYPE_MODE (sizetype));

          if (REG_P (target))
            emit_move_insn (target, targetx);
        }
    }

  else
    abort ();
}

/* Store the value of EXP (an expression tree)
   into a subfield of TARGET which has mode MODE and occupies
   BITSIZE bits, starting BITPOS bits from the start of TARGET.
   If MODE is VOIDmode, it means that we are storing into a bit-field.

   If VALUE_MODE is VOIDmode, return nothing in particular.
   UNSIGNEDP is not used in this case.

   Otherwise, return an rtx for the value stored.  This rtx
   has mode VALUE_MODE if that is convenient to do.
   In this case, UNSIGNEDP must be nonzero if the value is an unsigned type.

   TYPE is the type of the underlying object,

   ALIAS_SET is the alias set for the destination.  This value will
   (in general) be different from that for TARGET, since TARGET is a
   reference to the containing structure.  */

static rtx
store_field (rtx target, HOST_WIDE_INT bitsize, HOST_WIDE_INT bitpos,
             enum machine_mode mode, tree exp, enum machine_mode value_mode,
             int unsignedp, tree type, int alias_set)
{
  HOST_WIDE_INT width_mask = 0;

  if (TREE_CODE (exp) == ERROR_MARK)
    return const0_rtx;

  /* If we have nothing to store, do nothing unless the expression has
     side-effects.  */
  if (bitsize == 0)
    return expand_expr (exp, const0_rtx, VOIDmode, 0);
  else if (bitsize >= 0 && bitsize < HOST_BITS_PER_WIDE_INT)
    width_mask = ((HOST_WIDE_INT) 1 << bitsize) - 1;

  /* If we are storing into an unaligned field of an aligned union that is
     in a register, we may have the mode of TARGET being an integer mode but
     MODE == BLKmode.  In that case, get an aligned object whose size and
     alignment are the same as TARGET and store TARGET into it (we can avoid
     the store if the field being stored is the entire width of TARGET).  Then
     call ourselves recursively to store the field into a BLKmode version of
     that object.  Finally, load from the object into TARGET.  This is not
     very efficient in general, but should only be slightly more expensive
     than the otherwise-required unaligned accesses.  Perhaps this can be
     cleaned up later.  It's tempting to make OBJECT readonly, but it's set
     twice, once with emit_move_insn and once via store_field.  */

  if (mode == BLKmode
      && (GET_CODE (target) == REG || GET_CODE (target) == SUBREG))
    {
      rtx object = assign_temp (type, 0, 1, 1);
      rtx blk_object = adjust_address (object, BLKmode, 0);

      if (bitsize != (HOST_WIDE_INT) GET_MODE_BITSIZE (GET_MODE (target)))
        emit_move_insn (object, target);

      store_field (blk_object, bitsize, bitpos, mode, exp, VOIDmode, 0, type,
                   alias_set);

      emit_move_insn (target, object);

      /* We want to return the BLKmode version of the data.  */
      return blk_object;
    }

  if (GET_CODE (target) == CONCAT)
    {
      /* We're storing into a struct containing a single __complex.  */

      if (bitpos != 0)
        abort ();
      return store_expr (exp, target, 0);
    }

  /* If the structure is in a register or if the component
     is a bit field, we cannot use addressing to access it.
     Use bit-field techniques or SUBREG to store in it.  */

  if (mode == VOIDmode
      || (mode != BLKmode && ! direct_store[(int) mode]
          && GET_MODE_CLASS (mode) != MODE_COMPLEX_INT
          && GET_MODE_CLASS (mode) != MODE_COMPLEX_FLOAT)
      || GET_CODE (target) == REG
      || GET_CODE (target) == SUBREG
      /* If the field isn't aligned enough to store as an ordinary memref,
         store it as a bit field.  */
      || (mode != BLKmode
          && ((((MEM_ALIGN (target) < GET_MODE_ALIGNMENT (mode))
                || bitpos % GET_MODE_ALIGNMENT (mode))
               && SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (target)))
              || (bitpos % BITS_PER_UNIT != 0)))
      /* If the RHS and field are a constant size and the size of the
         RHS isn't the same size as the bitfield, we must use bitfield
         operations.  */
      || (bitsize >= 0
          && TREE_CODE (TYPE_SIZE (TREE_TYPE (exp))) == INTEGER_CST
          && compare_tree_int (TYPE_SIZE (TREE_TYPE (exp)), bitsize) != 0))
    {
      rtx temp = expand_expr (exp, NULL_RTX, VOIDmode, 0);

      /* If BITSIZE is narrower than the size of the type of EXP
         we will be narrowing TEMP.  Normally, what's wanted are the
         low-order bits.  However, if EXP's type is a record and this is
         big-endian machine, we want the upper BITSIZE bits.  */
      if (BYTES_BIG_ENDIAN && GET_MODE_CLASS (GET_MODE (temp)) == MODE_INT
          && bitsize < (HOST_WIDE_INT) GET_MODE_BITSIZE (GET_MODE (temp))
          && TREE_CODE (TREE_TYPE (exp)) == RECORD_TYPE)
        temp = expand_shift (RSHIFT_EXPR, GET_MODE (temp), temp,
                             size_int (GET_MODE_BITSIZE (GET_MODE (temp))
                                       - bitsize),
                             NULL_RTX, 1);

      /* Unless MODE is VOIDmode or BLKmode, convert TEMP to
         MODE.  */
      if (mode != VOIDmode && mode != BLKmode
          && mode != TYPE_MODE (TREE_TYPE (exp)))
        temp = convert_modes (mode, TYPE_MODE (TREE_TYPE (exp)), temp, 1);

      /* If the modes of TARGET and TEMP are both BLKmode, both
         must be in memory and BITPOS must be aligned on a byte
         boundary.  If so, we simply do a block copy.  */
      if (GET_MODE (target) == BLKmode && GET_MODE (temp) == BLKmode)
        {
          if (GET_CODE (target) != MEM || GET_CODE (temp) != MEM
              || bitpos % BITS_PER_UNIT != 0)
            abort ();

          target = adjust_address (target, VOIDmode, bitpos / BITS_PER_UNIT);
          emit_block_move (target, temp,
                           GEN_INT ((bitsize + BITS_PER_UNIT - 1)
                                    / BITS_PER_UNIT),
                           BLOCK_OP_NORMAL);

          return value_mode == VOIDmode ? const0_rtx : target;
        }

      /* Store the value in the bitfield.  */
      store_bit_field (target, bitsize, bitpos, mode, temp,
                       int_size_in_bytes (type));

      if (value_mode != VOIDmode)
        {
          /* The caller wants an rtx for the value.
             If possible, avoid refetching from the bitfield itself.  */
          if (width_mask != 0
              && ! (GET_CODE (target) == MEM && MEM_VOLATILE_P (target)))
            {
              tree count;
              enum machine_mode tmode;

              tmode = GET_MODE (temp);
              if (tmode == VOIDmode)
                tmode = value_mode;

              if (unsignedp)
                return expand_and (tmode, temp,
                                   gen_int_mode (width_mask, tmode),
                                   NULL_RTX);

              count = build_int_2 (GET_MODE_BITSIZE (tmode) - bitsize, 0);
              temp = expand_shift (LSHIFT_EXPR, tmode, temp, count, 0, 0);
              return expand_shift (RSHIFT_EXPR, tmode, temp, count, 0, 0);
            }

          return extract_bit_field (target, bitsize, bitpos, unsignedp,
                                    NULL_RTX, value_mode, VOIDmode,
                                    int_size_in_bytes (type));
        }
      return const0_rtx;
    }
  else
    {
      rtx addr = XEXP (target, 0);
      rtx to_rtx = target;

      /* If a value is wanted, it must be the lhs;
         so make the address stable for multiple use.  */

      if (value_mode != VOIDmode && GET_CODE (addr) != REG
          && ! CONSTANT_ADDRESS_P (addr)
          /* A frame-pointer reference is already stable.  */
          && ! (GET_CODE (addr) == PLUS
                && GET_CODE (XEXP (addr, 1)) == CONST_INT
                && (XEXP (addr, 0) == virtual_incoming_args_rtx
                    || XEXP (addr, 0) == virtual_stack_vars_rtx)))
        to_rtx = replace_equiv_address (to_rtx, copy_to_reg (addr));

      /* Now build a reference to just the desired component.  */

      to_rtx = adjust_address (target, mode, bitpos / BITS_PER_UNIT);

      if (to_rtx == target)
        to_rtx = copy_rtx (to_rtx);

      MEM_SET_IN_STRUCT_P (to_rtx, 1);
      if (!MEM_KEEP_ALIAS_SET_P (to_rtx) && MEM_ALIAS_SET (to_rtx) != 0)
        set_mem_alias_set (to_rtx, alias_set);

      return store_expr (exp, to_rtx, value_mode != VOIDmode);
    }
}
\f
/* Given an expression EXP that may be a COMPONENT_REF, a BIT_FIELD_REF,
   an ARRAY_REF, or an ARRAY_RANGE_REF, look for nested operations of these
   codes and find the ultimate containing object, which we return.

   We set *PBITSIZE to the size in bits that we want, *PBITPOS to the
   bit position, and *PUNSIGNEDP to the signedness of the field.
   If the position of the field is variable, we store a tree
   giving the variable offset (in units) in *POFFSET.
   This offset is in addition to the bit position.
   If the position is not variable, we store 0 in *POFFSET.

   If any of the extraction expressions is volatile,
   we store 1 in *PVOLATILEP.  Otherwise we don't change that.

   If the field is a bit-field, *PMODE is set to VOIDmode.  Otherwise, it
   is a mode that can be used to access the field.  In that case, *PBITSIZE
   is redundant.

   If the field describes a variable-sized object, *PMODE is set to
   VOIDmode and *PBITSIZE is set to -1.  An access cannot be made in
   this case, but the address of the object can be found.  */

tree
get_inner_reference (tree exp, HOST_WIDE_INT *pbitsize,
                     HOST_WIDE_INT *pbitpos, tree *poffset,
                     enum machine_mode *pmode, int *punsignedp,
                     int *pvolatilep)
{
  tree size_tree = 0;
  enum machine_mode mode = VOIDmode;
  tree offset = size_zero_node;
  tree bit_offset = bitsize_zero_node;
  tree placeholder_ptr = 0;
  tree tem;

  /* First get the mode, signedness, and size.  We do this from just the
     outermost expression.  */
  if (TREE_CODE (exp) == COMPONENT_REF)
    {
      size_tree = DECL_SIZE (TREE_OPERAND (exp, 1));
      if (! DECL_BIT_FIELD (TREE_OPERAND (exp, 1)))
        mode = DECL_MODE (TREE_OPERAND (exp, 1));

      *punsignedp = TREE_UNSIGNED (TREE_OPERAND (exp, 1));
    }
  else if (TREE_CODE (exp) == BIT_FIELD_REF)
    {
      size_tree = TREE_OPERAND (exp, 1);
      *punsignedp = TREE_UNSIGNED (exp);
    }
  else
    {
      mode = TYPE_MODE (TREE_TYPE (exp));
      *punsignedp = TREE_UNSIGNED (TREE_TYPE (exp));

      if (mode == BLKmode)
        size_tree = TYPE_SIZE (TREE_TYPE (exp));
      else
        *pbitsize = GET_MODE_BITSIZE (mode);
    }

  if (size_tree != 0)
    {
      if (! host_integerp (size_tree, 1))
        mode = BLKmode, *pbitsize = -1;
      else
        *pbitsize = tree_low_cst (size_tree, 1);
    }

  /* Compute cumulative bit-offset for nested component-refs and array-refs,
     and find the ultimate containing object.  */
  while (1)
    {
      if (TREE_CODE (exp) == BIT_FIELD_REF)
        bit_offset = size_binop (PLUS_EXPR, bit_offset, TREE_OPERAND (exp, 2));
      else if (TREE_CODE (exp) == COMPONENT_REF)
        {
          tree field = TREE_OPERAND (exp, 1);
          tree this_offset = DECL_FIELD_OFFSET (field);

          /* If this field hasn't been filled in yet, don't go
             past it.  This should only happen when folding expressions
             made during type construction.  */
          if (this_offset == 0)
            break;
          else if (CONTAINS_PLACEHOLDER_P (this_offset))
            this_offset = build (WITH_RECORD_EXPR, sizetype, this_offset, exp);

          offset = size_binop (PLUS_EXPR, offset, this_offset);
          bit_offset = size_binop (PLUS_EXPR, bit_offset,
                                   DECL_FIELD_BIT_OFFSET (field));

          /* ??? Right now we don't do anything with DECL_OFFSET_ALIGN.  */
        }

      else if (TREE_CODE (exp) == ARRAY_REF
               || TREE_CODE (exp) == ARRAY_RANGE_REF)
        {
          tree index = TREE_OPERAND (exp, 1);
          tree array = TREE_OPERAND (exp, 0);
          tree domain = TYPE_DOMAIN (TREE_TYPE (array));
          tree low_bound = (domain ? TYPE_MIN_VALUE (domain) : 0);
          tree unit_size = TYPE_SIZE_UNIT (TREE_TYPE (TREE_TYPE (array)));

          /* We assume all arrays have sizes that are a multiple of a byte.
             First subtract the lower bound, if any, in the type of the
             index, then convert to sizetype and multiply by the size of the
             array element.  */
          if (low_bound != 0 && ! integer_zerop (low_bound))
            index = fold (build (MINUS_EXPR, TREE_TYPE (index),
                                 index, low_bound));

          /* If the index has a self-referential type, pass it to a
             WITH_RECORD_EXPR; if the component size is, pass our
             component to one.  */
          if (CONTAINS_PLACEHOLDER_P (index))
            index = build (WITH_RECORD_EXPR, TREE_TYPE (index), index, exp);
          if (CONTAINS_PLACEHOLDER_P (unit_size))
            unit_size = build (WITH_RECORD_EXPR, sizetype, unit_size, array);

          offset = size_binop (PLUS_EXPR, offset,
                               size_binop (MULT_EXPR,
                                           convert (sizetype, index),
                                           unit_size));
        }

      else if (TREE_CODE (exp) == PLACEHOLDER_EXPR)
        {
          tree new = find_placeholder (exp, &placeholder_ptr);

          /* If we couldn't find the replacement, return the PLACEHOLDER_EXPR.
             We might have been called from tree optimization where we
             haven't set up an object yet.  */
          if (new == 0)
            break;
          else
            exp = new;

          continue;
        }

      /* We can go inside most conversions: all NON_VALUE_EXPRs, all normal
         conversions that don't change the mode, and all view conversions
         except those that need to "step up" the alignment.  */
      else if (TREE_CODE (exp) != NON_LVALUE_EXPR
               && ! (TREE_CODE (exp) == VIEW_CONVERT_EXPR
                     && ! ((TYPE_ALIGN (TREE_TYPE (exp))
                            > TYPE_ALIGN (TREE_TYPE (TREE_OPERAND (exp, 0))))
                           && STRICT_ALIGNMENT
                           && (TYPE_ALIGN (TREE_TYPE (TREE_OPERAND (exp, 0)))
                               < BIGGEST_ALIGNMENT)
                           && (TYPE_ALIGN_OK (TREE_TYPE (exp))
                               || TYPE_ALIGN_OK (TREE_TYPE
                                                 (TREE_OPERAND (exp, 0))))))
               && ! ((TREE_CODE (exp) == NOP_EXPR
                      || TREE_CODE (exp) == CONVERT_EXPR)
                     && (TYPE_MODE (TREE_TYPE (exp))
                         == TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))))))
        break;

      /* If any reference in the chain is volatile, the effect is volatile.  */
      if (TREE_THIS_VOLATILE (exp))
        *pvolatilep = 1;

      exp = TREE_OPERAND (exp, 0);
    }

  /* If OFFSET is constant, see if we can return the whole thing as a
     constant bit position.  Otherwise, split it up.  */
  if (host_integerp (offset, 0)
      && 0 != (tem = size_binop (MULT_EXPR, convert (bitsizetype, offset),
                                 bitsize_unit_node))
      && 0 != (tem = size_binop (PLUS_EXPR, tem, bit_offset))
      && host_integerp (tem, 0))
    *pbitpos = tree_low_cst (tem, 0), *poffset = 0;
  else
    *pbitpos = tree_low_cst (bit_offset, 0), *poffset = offset;

  *pmode = mode;
  return exp;
}

/* Return 1 if T is an expression that get_inner_reference handles.  */

int
handled_component_p (tree t)
{
  switch (TREE_CODE (t))
    {
    case BIT_FIELD_REF:
    case COMPONENT_REF:
    case ARRAY_REF:
    case ARRAY_RANGE_REF:
    case NON_LVALUE_EXPR:
    case VIEW_CONVERT_EXPR:
      return 1;

    /* ??? Sure they are handled, but get_inner_reference may return
       a different PBITSIZE, depending upon whether the expression is
       wrapped up in a NOP_EXPR or not, e.g. for bitfields.  */
    case NOP_EXPR:
    case CONVERT_EXPR:
      return (TYPE_MODE (TREE_TYPE (t))
              == TYPE_MODE (TREE_TYPE (TREE_OPERAND (t, 0))));

    default:
      return 0;
    }
}
\f
/* Given an rtx VALUE that may contain additions and multiplications, return
   an equivalent value that just refers to a register, memory, or constant.
   This is done by generating instructions to perform the arithmetic and
   returning a pseudo-register containing the value.

   The returned value may be a REG, SUBREG, MEM or constant.  */

rtx
force_operand (rtx value, rtx target)
{
  rtx op1, op2;
  /* Use subtarget as the target for operand 0 of a binary operation.  */
  rtx subtarget = get_subtarget (target);
  enum rtx_code code = GET_CODE (value);

  /* Check for subreg applied to an expression produced by loop optimizer.  */
  if (code == SUBREG
      && GET_CODE (SUBREG_REG (value)) != REG
      && GET_CODE (SUBREG_REG (value)) != MEM)
    {
      value = simplify_gen_subreg (GET_MODE (value),
                                   force_reg (GET_MODE (SUBREG_REG (value)),
                                              force_operand (SUBREG_REG (value),
                                                             NULL_RTX)),
                                   GET_MODE (SUBREG_REG (value)),
                                   SUBREG_BYTE (value));
      code = GET_CODE (value);
    }

  /* Check for a PIC address load.  */
  if ((code == PLUS || code == MINUS)
      && XEXP (value, 0) == pic_offset_table_rtx
      && (GET_CODE (XEXP (value, 1)) == SYMBOL_REF
          || GET_CODE (XEXP (value, 1)) == LABEL_REF
          || GET_CODE (XEXP (value, 1)) == CONST))
    {
      if (!subtarget)
        subtarget = gen_reg_rtx (GET_MODE (value));
      emit_move_insn (subtarget, value);
      return subtarget;
    }

  if (code == ZERO_EXTEND || code == SIGN_EXTEND)
    {
      if (!target)
        target = gen_reg_rtx (GET_MODE (value));
      convert_move (target, force_operand (XEXP (value, 0), NULL),
                    code == ZERO_EXTEND);
      return target;
    }

  if (GET_RTX_CLASS (code) == '2' || GET_RTX_CLASS (code) == 'c')
    {
      op2 = XEXP (value, 1);
      if (!CONSTANT_P (op2) && !(GET_CODE (op2) == REG && op2 != subtarget))
        subtarget = 0;
      if (code == MINUS && GET_CODE (op2) == CONST_INT)
        {
          code = PLUS;
          op2 = negate_rtx (GET_MODE (value), op2);
        }

      /* Check for an addition with OP2 a constant integer and our first
         operand a PLUS of a virtual register and something else.  In that
         case, we want to emit the sum of the virtual register and the
         constant first and then add the other value.  This allows virtual
         register instantiation to simply modify the constant rather than
         creating another one around this addition.  */
      if (code == PLUS && GET_CODE (op2) == CONST_INT
          && GET_CODE (XEXP (value, 0)) == PLUS
          && GET_CODE (XEXP (XEXP (value, 0), 0)) == REG
          && REGNO (XEXP (XEXP (value, 0), 0)) >= FIRST_VIRTUAL_REGISTER
          && REGNO (XEXP (XEXP (value, 0), 0)) <= LAST_VIRTUAL_REGISTER)
        {
          rtx temp = expand_simple_binop (GET_MODE (value), code,
                                          XEXP (XEXP (value, 0), 0), op2,
                                          subtarget, 0, OPTAB_LIB_WIDEN);
          return expand_simple_binop (GET_MODE (value), code, temp,
                                      force_operand (XEXP (XEXP (value,
                                                                 0), 1), 0),
                                      target, 0, OPTAB_LIB_WIDEN);
        }

      op1 = force_operand (XEXP (value, 0), subtarget);
      op2 = force_operand (op2, NULL_RTX);
      switch (code)
        {
        case MULT:
          return expand_mult (GET_MODE (value), op1, op2, target, 1);
        case DIV:
          if (!INTEGRAL_MODE_P (GET_MODE (value)))
            return expand_simple_binop (GET_MODE (value), code, op1, op2,
                                        target, 1, OPTAB_LIB_WIDEN);
          else
            return expand_divmod (0,
                                  FLOAT_MODE_P (GET_MODE (value))
                                  ? RDIV_EXPR : TRUNC_DIV_EXPR,
                                  GET_MODE (value), op1, op2, target, 0);
          break;
        case MOD:
          return expand_divmod (1, TRUNC_MOD_EXPR, GET_MODE (value), op1, op2,
                                target, 0);
          break;
        case UDIV:
          return expand_divmod (0, TRUNC_DIV_EXPR, GET_MODE (value), op1, op2,
                                target, 1);
          break;
        case UMOD:
          return expand_divmod (1, TRUNC_MOD_EXPR, GET_MODE (value), op1, op2,
                                target, 1);
          break;
        case ASHIFTRT:
          return expand_simple_binop (GET_MODE (value), code, op1, op2,
                                      target, 0, OPTAB_LIB_WIDEN);
          break;
        default:
          return expand_simple_binop (GET_MODE (value), code, op1, op2,
                                      target, 1, OPTAB_LIB_WIDEN);
        }
    }
  if (GET_RTX_CLASS (code) == '1')
    {
      op1 = force_operand (XEXP (value, 0), NULL_RTX);
      return expand_simple_unop (GET_MODE (value), code, op1, target, 0);
    }

#ifdef INSN_SCHEDULING
  /* On machines that have insn scheduling, we want all memory reference to be
     explicit, so we need to deal with such paradoxical SUBREGs.  */
  if (GET_CODE (value) == SUBREG && GET_CODE (SUBREG_REG (value)) == MEM
      && (GET_MODE_SIZE (GET_MODE (value))
          > GET_MODE_SIZE (GET_MODE (SUBREG_REG (value)))))
    value
      = simplify_gen_subreg (GET_MODE (value),
                             force_reg (GET_MODE (SUBREG_REG (value)),
                                        force_operand (SUBREG_REG (value),
                                                       NULL_RTX)),
                             GET_MODE (SUBREG_REG (value)),
                             SUBREG_BYTE (value));
#endif

  return value;
}
\f
/* Subroutine of expand_expr: return nonzero iff there is no way that
   EXP can reference X, which is being modified.  TOP_P is nonzero if this
   call is going to be used to determine whether we need a temporary
   for EXP, as opposed to a recursive call to this function.

   It is always safe for this routine to return zero since it merely
   searches for optimization opportunities.  */

int
safe_from_p (rtx x, tree exp, int top_p)
{
  rtx exp_rtl = 0;
  int i, nops;
  static tree save_expr_list;

  if (x == 0
      /* If EXP has varying size, we MUST use a target since we currently
         have no way of allocating temporaries of variable size
         (except for arrays that have TYPE_ARRAY_MAX_SIZE set).
         So we assume here that something at a higher level has prevented a
         clash.  This is somewhat bogus, but the best we can do.  Only
         do this when X is BLKmode and when we are at the top level.  */
      || (top_p && TREE_TYPE (exp) != 0 && COMPLETE_TYPE_P (TREE_TYPE (exp))
          && TREE_CODE (TYPE_SIZE (TREE_TYPE (exp))) != INTEGER_CST
          && (TREE_CODE (TREE_TYPE (exp)) != ARRAY_TYPE
              || TYPE_ARRAY_MAX_SIZE (TREE_TYPE (exp)) == NULL_TREE
              || TREE_CODE (TYPE_ARRAY_MAX_SIZE (TREE_TYPE (exp)))
              != INTEGER_CST)
          && GET_MODE (x) == BLKmode)
      /* If X is in the outgoing argument area, it is always safe.  */
      || (GET_CODE (x) == MEM
          && (XEXP (x, 0) == virtual_outgoing_args_rtx
              || (GET_CODE (XEXP (x, 0)) == PLUS
                  && XEXP (XEXP (x, 0), 0) == virtual_outgoing_args_rtx))))
    return 1;

  /* If this is a subreg of a hard register, declare it unsafe, otherwise,
     find the underlying pseudo.  */
  if (GET_CODE (x) == SUBREG)
    {
      x = SUBREG_REG (x);
      if (GET_CODE (x) == REG && REGNO (x) < FIRST_PSEUDO_REGISTER)
        return 0;
    }

  /* A SAVE_EXPR might appear many times in the expression passed to the
     top-level safe_from_p call, and if it has a complex subexpression,
     examining it multiple times could result in a combinatorial explosion.
     E.g. on an Alpha running at least 200MHz, a Fortran testcase compiled
     with optimization took about 28 minutes to compile -- even though it was
     only a few lines long.  So we mark each SAVE_EXPR we see with TREE_PRIVATE
     and turn that off when we are done.  We keep a list of the SAVE_EXPRs
     we have processed.  Note that the only test of top_p was above.  */

  if (top_p)
    {
      int rtn;
      tree t;

      save_expr_list = 0;

      rtn = safe_from_p (x, exp, 0);

      for (t = save_expr_list; t != 0; t = TREE_CHAIN (t))
        TREE_PRIVATE (TREE_PURPOSE (t)) = 0;

      return rtn;
    }

  /* Now look at our tree code and possibly recurse.  */
  switch (TREE_CODE_CLASS (TREE_CODE (exp)))
    {
    case 'd':
      exp_rtl = DECL_RTL_IF_SET (exp);
      break;

    case 'c':
      return 1;

    case 'x':
      if (TREE_CODE (exp) == TREE_LIST)
        {
          while (1)
            {
              if (TREE_VALUE (exp) && !safe_from_p (x, TREE_VALUE (exp), 0))
                return 0;
              exp = TREE_CHAIN (exp);
              if (!exp)
                return 1;
              if (TREE_CODE (exp) != TREE_LIST)
                return safe_from_p (x, exp, 0);
            }
        }
      else if (TREE_CODE (exp) == ERROR_MARK)
        return 1;       /* An already-visited SAVE_EXPR? */
      else
        return 0;

    case '2':
    case '<':
      if (!safe_from_p (x, TREE_OPERAND (exp, 1), 0))
        return 0;
      /* Fall through.  */

    case '1':
      return safe_from_p (x, TREE_OPERAND (exp, 0), 0);

    case 'e':
    case 'r':
      /* Now do code-specific tests.  EXP_RTL is set to any rtx we find in
         the expression.  If it is set, we conflict iff we are that rtx or
         both are in memory.  Otherwise, we check all operands of the
         expression recursively.  */

      switch (TREE_CODE (exp))
        {
        case ADDR_EXPR:
          /* If the operand is static or we are static, we can't conflict.
             Likewise if we don't conflict with the operand at all.  */
          if (staticp (TREE_OPERAND (exp, 0))
              || TREE_STATIC (exp)
              || safe_from_p (x, TREE_OPERAND (exp, 0), 0))
            return 1;

          /* Otherwise, the only way this can conflict is if we are taking
             the address of a DECL a that address if part of X, which is
             very rare.  */
          exp = TREE_OPERAND (exp, 0);
          if (DECL_P (exp))
            {
              if (!DECL_RTL_SET_P (exp)
                  || GET_CODE (DECL_RTL (exp)) != MEM)
                return 0;
              else
                exp_rtl = XEXP (DECL_RTL (exp), 0);
            }
          break;

        case INDIRECT_REF:
          if (GET_CODE (x) == MEM
              && alias_sets_conflict_p (MEM_ALIAS_SET (x),
                                        get_alias_set (exp)))
            return 0;
          break;

        case CALL_EXPR:
          /* Assume that the call will clobber all hard registers and
             all of memory.  */
          if ((GET_CODE (x) == REG && REGNO (x) < FIRST_PSEUDO_REGISTER)
              || GET_CODE (x) == MEM)
            return 0;
          break;

        case RTL_EXPR:
          /* If a sequence exists, we would have to scan every instruction
             in the sequence to see if it was safe.  This is probably not
             worthwhile.  */
          if (RTL_EXPR_SEQUENCE (exp))
            return 0;

          exp_rtl = RTL_EXPR_RTL (exp);
          break;

        case WITH_CLEANUP_EXPR:
          exp_rtl = WITH_CLEANUP_EXPR_RTL (exp);
          break;

        case CLEANUP_POINT_EXPR:
          return safe_from_p (x, TREE_OPERAND (exp, 0), 0);

        case SAVE_EXPR:
          exp_rtl = SAVE_EXPR_RTL (exp);
          if (exp_rtl)
            break;

          /* If we've already scanned this, don't do it again.  Otherwise,
             show we've scanned it and record for clearing the flag if we're
             going on.  */
          if (TREE_PRIVATE (exp))
            return 1;

          TREE_PRIVATE (exp) = 1;
          if (! safe_from_p (x, TREE_OPERAND (exp, 0), 0))
            {
              TREE_PRIVATE (exp) = 0;
              return 0;
            }

          save_expr_list = tree_cons (exp, NULL_TREE, save_expr_list);
          return 1;

        case BIND_EXPR:
          /* The only operand we look at is operand 1.  The rest aren't
             part of the expression.  */
          return safe_from_p (x, TREE_OPERAND (exp, 1), 0);

        default:
          break;
        }

      /* If we have an rtx, we do not need to scan our operands.  */
      if (exp_rtl)
        break;

      nops = first_rtl_op (TREE_CODE (exp));
      for (i = 0; i < nops; i++)
        if (TREE_OPERAND (exp, i) != 0
            && ! safe_from_p (x, TREE_OPERAND (exp, i), 0))
          return 0;

      /* If this is a language-specific tree code, it may require
         special handling.  */
      if ((unsigned int) TREE_CODE (exp)
          >= (unsigned int) LAST_AND_UNUSED_TREE_CODE
          && !(*lang_hooks.safe_from_p) (x, exp))
        return 0;
    }

  /* If we have an rtl, find any enclosed object.  Then see if we conflict
     with it.  */
  if (exp_rtl)
    {
      if (GET_CODE (exp_rtl) == SUBREG)
        {
          exp_rtl = SUBREG_REG (exp_rtl);
          if (GET_CODE (exp_rtl) == REG
              && REGNO (exp_rtl) < FIRST_PSEUDO_REGISTER)
            return 0;
        }

      /* If the rtl is X, then it is not safe.  Otherwise, it is unless both
         are memory and they conflict.  */
      return ! (rtx_equal_p (x, exp_rtl)
                || (GET_CODE (x) == MEM && GET_CODE (exp_rtl) == MEM
                    && true_dependence (exp_rtl, VOIDmode, x,
                                        rtx_addr_varies_p)));
    }

  /* If we reach here, it is safe.  */
  return 1;
}

/* Subroutine of expand_expr: return rtx if EXP is a
   variable or parameter; else return 0.  */

static rtx
var_rtx (tree exp)
{
  STRIP_NOPS (exp);
  switch (TREE_CODE (exp))
    {
    case PARM_DECL:
    case VAR_DECL:
      return DECL_RTL (exp);
    default:
      return 0;
    }
}
\f
/* Return the highest power of two that EXP is known to be a multiple of.
   This is used in updating alignment of MEMs in array references.  */

static unsigned HOST_WIDE_INT
highest_pow2_factor (tree exp)
{
  unsigned HOST_WIDE_INT c0, c1;

  switch (TREE_CODE (exp))
    {
    case INTEGER_CST:
      /* We can find the lowest bit that's a one.  If the low
         HOST_BITS_PER_WIDE_INT bits are zero, return BIGGEST_ALIGNMENT.
         We need to handle this case since we can find it in a COND_EXPR,
         a MIN_EXPR, or a MAX_EXPR.  If the constant overflows, we have an
         erroneous program, so return BIGGEST_ALIGNMENT to avoid any
         later ICE.  */
      if (TREE_CONSTANT_OVERFLOW (exp))
        return BIGGEST_ALIGNMENT;
      else
        {
          /* Note: tree_low_cst is intentionally not used here,
             we don't care about the upper bits.  */
          c0 = TREE_INT_CST_LOW (exp);
          c0 &= -c0;
          return c0 ? c0 : BIGGEST_ALIGNMENT;
        }
      break;

    case PLUS_EXPR:  case MINUS_EXPR:  case MIN_EXPR:  case MAX_EXPR:
      c0 = highest_pow2_factor (TREE_OPERAND (exp, 0));
      c1 = highest_pow2_factor (TREE_OPERAND (exp, 1));
      return MIN (c0, c1);

    case MULT_EXPR:
      c0 = highest_pow2_factor (TREE_OPERAND (exp, 0));
      c1 = highest_pow2_factor (TREE_OPERAND (exp, 1));
      return c0 * c1;

    case ROUND_DIV_EXPR:  case TRUNC_DIV_EXPR:  case FLOOR_DIV_EXPR:
    case CEIL_DIV_EXPR:
      if (integer_pow2p (TREE_OPERAND (exp, 1))
          && host_integerp (TREE_OPERAND (exp, 1), 1))
        {
          c0 = highest_pow2_factor (TREE_OPERAND (exp, 0));
          c1 = tree_low_cst (TREE_OPERAND (exp, 1), 1);
          return MAX (1, c0 / c1);
        }
      break;

    case NON_LVALUE_EXPR:  case NOP_EXPR:  case CONVERT_EXPR:
    case SAVE_EXPR: case WITH_RECORD_EXPR:
      return highest_pow2_factor (TREE_OPERAND (exp, 0));

    case COMPOUND_EXPR:
      return highest_pow2_factor (TREE_OPERAND (exp, 1));

    case COND_EXPR:
      c0 = highest_pow2_factor (TREE_OPERAND (exp, 1));
      c1 = highest_pow2_factor (TREE_OPERAND (exp, 2));
      return MIN (c0, c1);

    default:
      break;
    }

  return 1;
}

/* Similar, except that it is known that the expression must be a multiple
   of the alignment of TYPE.  */

static unsigned HOST_WIDE_INT
highest_pow2_factor_for_type (tree type, tree exp)
{
  unsigned HOST_WIDE_INT type_align, factor;

  factor = highest_pow2_factor (exp);
  type_align = TYPE_ALIGN (type) / BITS_PER_UNIT;
  return MAX (factor, type_align);
}
\f
/* Return an object on the placeholder list that matches EXP, a
   PLACEHOLDER_EXPR.  An object "matches" if it is of the type of the
   PLACEHOLDER_EXPR or a pointer type to it.  For further information, see
   tree.def.  If no such object is found, return 0.  If PLIST is nonzero, it
   is a location which initially points to a starting location in the
   placeholder list (zero means start of the list) and where a pointer into
   the placeholder list at which the object is found is placed.  */

tree
find_placeholder (tree exp, tree *plist)
{
  tree type = TREE_TYPE (exp);
  tree placeholder_expr;

  for (placeholder_expr
       = plist && *plist ? TREE_CHAIN (*plist) : placeholder_list;
       placeholder_expr != 0;
       placeholder_expr = TREE_CHAIN (placeholder_expr))
    {
      tree need_type = TYPE_MAIN_VARIANT (type);
      tree elt;

      /* Find the outermost reference that is of the type we want.  If none,
         see if any object has a type that is a pointer to the type we
         want.  */
      for (elt = TREE_PURPOSE (placeholder_expr); elt != 0;
           elt = ((TREE_CODE (elt) == COMPOUND_EXPR
                   || TREE_CODE (elt) == COND_EXPR)
                  ? TREE_OPERAND (elt, 1)
                  : (TREE_CODE_CLASS (TREE_CODE (elt)) == 'r'
                     || TREE_CODE_CLASS (TREE_CODE (elt)) == '1'
                     || TREE_CODE_CLASS (TREE_CODE (elt)) == '2'
                     || TREE_CODE_CLASS (TREE_CODE (elt)) == 'e')
                  ? TREE_OPERAND (elt, 0) : 0))
        if (TYPE_MAIN_VARIANT (TREE_TYPE (elt)) == need_type)
          {
            if (plist)
              *plist = placeholder_expr;
            return elt;
          }

      for (elt = TREE_PURPOSE (placeholder_expr); elt != 0;
           elt
           = ((TREE_CODE (elt) == COMPOUND_EXPR
               || TREE_CODE (elt) == COND_EXPR)
              ? TREE_OPERAND (elt, 1)
              : (TREE_CODE_CLASS (TREE_CODE (elt)) == 'r'
                 || TREE_CODE_CLASS (TREE_CODE (elt)) == '1'
                 || TREE_CODE_CLASS (TREE_CODE (elt)) == '2'
                 || TREE_CODE_CLASS (TREE_CODE (elt)) == 'e')
              ? TREE_OPERAND (elt, 0) : 0))
        if (POINTER_TYPE_P (TREE_TYPE (elt))
            && (TYPE_MAIN_VARIANT (TREE_TYPE (TREE_TYPE (elt)))
                == need_type))
          {
            if (plist)
              *plist = placeholder_expr;
            return build1 (INDIRECT_REF, need_type, elt);
          }
    }

  return 0;
}

/* Subroutine of expand_expr.  Expand the two operands of a binary
   expression EXP0 and EXP1 placing the results in OP0 and OP1.
   The value may be stored in TARGET if TARGET is nonzero.  The
   MODIFIER argument is as documented by expand_expr.  */

static void
expand_operands (tree exp0, tree exp1, rtx target, rtx *op0, rtx *op1,
                 enum expand_modifier modifier)
{
  if (! safe_from_p (target, exp1, 1))
    target = 0;
  if (operand_equal_p (exp0, exp1, 0))
    {
      *op0 = expand_expr (exp0, target, VOIDmode, modifier);
      *op1 = copy_rtx (*op0);
    }
  else
    {
      /* If we need to preserve evaluation order, copy exp0 into its own
         temporary variable so that it can't be clobbered by exp1.  */
      if (flag_evaluation_order && TREE_SIDE_EFFECTS (exp1))
        exp0 = save_expr (exp0);
      *op0 = expand_expr (exp0, target, VOIDmode, modifier);
      *op1 = expand_expr (exp1, NULL_RTX, VOIDmode, modifier);
    }
}

\f
/* expand_expr: generate code for computing expression EXP.
   An rtx for the computed value is returned.  The value is never null.
   In the case of a void EXP, const0_rtx is returned.

   The value may be stored in TARGET if TARGET is nonzero.
   TARGET is just a suggestion; callers must assume that
   the rtx returned may not be the same as TARGET.

   If TARGET is CONST0_RTX, it means that the value will be ignored.

   If TMODE is not VOIDmode, it suggests generating the
   result in mode TMODE.  But this is done only when convenient.
   Otherwise, TMODE is ignored and the value generated in its natural mode.
   TMODE is just a suggestion; callers must assume that
   the rtx returned may not have mode TMODE.

   Note that TARGET may have neither TMODE nor MODE.  In that case, it
   probably will not be used.

   If MODIFIER is EXPAND_SUM then when EXP is an addition
   we can return an rtx of the form (MULT (REG ...) (CONST_INT ...))
   or a nest of (PLUS ...) and (MINUS ...) where the terms are
   products as above, or REG or MEM, or constant.
   Ordinarily in such cases we would output mul or add instructions
   and then return a pseudo reg containing the sum.

   EXPAND_INITIALIZER is much like EXPAND_SUM except that
   it also marks a label as absolutely required (it can't be dead).
   It also makes a ZERO_EXTEND or SIGN_EXTEND instead of emitting extend insns.
   This is used for outputting expressions used in initializers.

   EXPAND_CONST_ADDRESS says that it is okay to return a MEM
   with a constant address even if that address is not normally legitimate.
   EXPAND_INITIALIZER and EXPAND_SUM also have this effect.

   EXPAND_STACK_PARM is used when expanding to a TARGET on the stack for
   a call parameter.  Such targets require special care as we haven't yet
   marked TARGET so that it's safe from being trashed by libcalls.  We
   don't want to use TARGET for anything but the final result;
   Intermediate values must go elsewhere.   Additionally, calls to
   emit_block_move will be flagged with BLOCK_OP_CALL_PARM.  

   If EXP is a VAR_DECL whose DECL_RTL was a MEM with an invalid
   address, and ALT_RTL is non-NULL, then *ALT_RTL is set to the
   DECL_RTL of the VAR_DECL.  *ALT_RTL is also set if EXP is a
   COMPOUND_EXPR whose second argument is such a VAR_DECL, and so on
   recursively.  */

rtx
expand_expr_real (tree exp, rtx target, enum machine_mode tmode,
                  enum expand_modifier modifier, rtx *alt_rtl)
{
  rtx op0, op1, temp;
  tree type = TREE_TYPE (exp);
  int unsignedp = TREE_UNSIGNED (type);
  enum machine_mode mode;
  enum tree_code code = TREE_CODE (exp);
  optab this_optab;
  rtx subtarget, original_target;
  int ignore;
  tree context;

  /* Handle ERROR_MARK before anybody tries to access its type.  */
  if (TREE_CODE (exp) == ERROR_MARK || TREE_CODE (type) == ERROR_MARK)
    {
      op0 = CONST0_RTX (tmode);
      if (op0 != 0)
        return op0;
      return const0_rtx;
    }

  mode = TYPE_MODE (type);
  /* Use subtarget as the target for operand 0 of a binary operation.  */
  subtarget = get_subtarget (target);
  original_target = target;
  ignore = (target == const0_rtx
            || ((code == NON_LVALUE_EXPR || code == NOP_EXPR
                 || code == CONVERT_EXPR || code == REFERENCE_EXPR
                 || code == COND_EXPR || code == VIEW_CONVERT_EXPR)
                && TREE_CODE (type) == VOID_TYPE));

  /* If we are going to ignore this result, we need only do something
     if there is a side-effect somewhere in the expression.  If there
     is, short-circuit the most common cases here.  Note that we must
     not call expand_expr with anything but const0_rtx in case this
     is an initial expansion of a size that contains a PLACEHOLDER_EXPR.  */

  if (ignore)
    {
      if (! TREE_SIDE_EFFECTS (exp))
        return const0_rtx;

      /* Ensure we reference a volatile object even if value is ignored, but
         don't do this if all we are doing is taking its address.  */
      if (TREE_THIS_VOLATILE (exp)
          && TREE_CODE (exp) != FUNCTION_DECL
          && mode != VOIDmode && mode != BLKmode
          && modifier != EXPAND_CONST_ADDRESS)
        {
          temp = expand_expr (exp, NULL_RTX, VOIDmode, modifier);
          if (GET_CODE (temp) == MEM)
            temp = copy_to_reg (temp);
          return const0_rtx;
        }

      if (TREE_CODE_CLASS (code) == '1' || code == COMPONENT_REF
          || code == INDIRECT_REF || code == BUFFER_REF)
        return expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode,
                            modifier);

      else if (TREE_CODE_CLASS (code) == '2' || TREE_CODE_CLASS (code) == '<'
               || code == ARRAY_REF || code == ARRAY_RANGE_REF)
        {
          expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, modifier);
          expand_expr (TREE_OPERAND (exp, 1), const0_rtx, VOIDmode, modifier);
          return const0_rtx;
        }
      else if ((code == TRUTH_ANDIF_EXPR || code == TRUTH_ORIF_EXPR)
               && ! TREE_SIDE_EFFECTS (TREE_OPERAND (exp, 1)))
        /* If the second operand has no side effects, just evaluate
           the first.  */
        return expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode,
                            modifier);
      else if (code == BIT_FIELD_REF)
        {
          expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, modifier);
          expand_expr (TREE_OPERAND (exp, 1), const0_rtx, VOIDmode, modifier);
          expand_expr (TREE_OPERAND (exp, 2), const0_rtx, VOIDmode, modifier);
          return const0_rtx;
        }

      target = 0;
    }

  /* If will do cse, generate all results into pseudo registers
     since 1) that allows cse to find more things
     and 2) otherwise cse could produce an insn the machine
     cannot support.  An exception is a CONSTRUCTOR into a multi-word
     MEM: that's much more likely to be most efficient into the MEM.
     Another is a CALL_EXPR which must return in memory.  */

  if (! cse_not_expected && mode != BLKmode && target
      && (GET_CODE (target) != REG || REGNO (target) < FIRST_PSEUDO_REGISTER)
      && ! (code == CONSTRUCTOR && GET_MODE_SIZE (mode) > UNITS_PER_WORD)
      && ! (code == CALL_EXPR && aggregate_value_p (exp, exp)))
    target = 0;

  switch (code)
    {
    case LABEL_DECL:
      {
        tree function = decl_function_context (exp);
        /* Labels in containing functions, or labels used from initializers,
           must be forced.  */
        if (modifier == EXPAND_INITIALIZER
            || (function != current_function_decl
                && function != inline_function_decl
                && function != 0))
          temp = force_label_rtx (exp);
        else
          temp = label_rtx (exp);

        temp = gen_rtx_MEM (FUNCTION_MODE, gen_rtx_LABEL_REF (Pmode, temp));
        if (function != current_function_decl
            && function != inline_function_decl && function != 0)
          LABEL_REF_NONLOCAL_P (XEXP (temp, 0)) = 1;
        return temp;
      }

    case PARM_DECL:
      if (!DECL_RTL_SET_P (exp))
        {
          error ("%Jprior parameter's size depends on '%D'", exp, exp);
          return CONST0_RTX (mode);
        }

      /* ... fall through ...  */

    case VAR_DECL:
      /* If a static var's type was incomplete when the decl was written,
         but the type is complete now, lay out the decl now.  */
      if (DECL_SIZE (exp) == 0
          && COMPLETE_OR_UNBOUND_ARRAY_TYPE_P (TREE_TYPE (exp))
          && (TREE_STATIC (exp) || DECL_EXTERNAL (exp)))
        layout_decl (exp, 0);

      /* ... fall through ...  */

    case FUNCTION_DECL:
    case RESULT_DECL:
      if (DECL_RTL (exp) == 0)
        abort ();

      /* Ensure variable marked as used even if it doesn't go through
         a parser.  If it hasn't be used yet, write out an external
         definition.  */
      if (! TREE_USED (exp))
        {
          assemble_external (exp);
          TREE_USED (exp) = 1;
        }

      /* Show we haven't gotten RTL for this yet.  */
      temp = 0;

      /* Handle variables inherited from containing functions.  */
      context = decl_function_context (exp);

      /* We treat inline_function_decl as an alias for the current function
         because that is the inline function whose vars, types, etc.
         are being merged into the current function.
         See expand_inline_function.  */

      if (context != 0 && context != current_function_decl
          && context != inline_function_decl
          /* If var is static, we don't need a static chain to access it.  */
          && ! (GET_CODE (DECL_RTL (exp)) == MEM
                && CONSTANT_P (XEXP (DECL_RTL (exp), 0))))
        {
          rtx addr;

          /* Mark as non-local and addressable.  */
          DECL_NONLOCAL (exp) = 1;
          if (DECL_NO_STATIC_CHAIN (current_function_decl))
            abort ();
          (*lang_hooks.mark_addressable) (exp);
          if (GET_CODE (DECL_RTL (exp)) != MEM)
            abort ();
          addr = XEXP (DECL_RTL (exp), 0);
          if (GET_CODE (addr) == MEM)
            addr
              = replace_equiv_address (addr,
                                       fix_lexical_addr (XEXP (addr, 0), exp));
          else
            addr = fix_lexical_addr (addr, exp);

          temp = replace_equiv_address (DECL_RTL (exp), addr);
        }

      /* This is the case of an array whose size is to be determined
         from its initializer, while the initializer is still being parsed.
         See expand_decl.  */

      else if (GET_CODE (DECL_RTL (exp)) == MEM
               && GET_CODE (XEXP (DECL_RTL (exp), 0)) == REG)
        temp = validize_mem (DECL_RTL (exp));

      /* If DECL_RTL is memory, we are in the normal case and either
         the address is not valid or it is not a register and -fforce-addr
         is specified, get the address into a register.  */

      else if (GET_CODE (DECL_RTL (exp)) == MEM
               && modifier != EXPAND_CONST_ADDRESS
               && modifier != EXPAND_SUM
               && modifier != EXPAND_INITIALIZER
               && (! memory_address_p (DECL_MODE (exp),
                                       XEXP (DECL_RTL (exp), 0))
                   || (flag_force_addr
                       && GET_CODE (XEXP (DECL_RTL (exp), 0)) != REG)))
        {
          if (alt_rtl)
            *alt_rtl = DECL_RTL (exp);
          temp = replace_equiv_address (DECL_RTL (exp),
                                        copy_rtx (XEXP (DECL_RTL (exp), 0)));
        }

      /* If we got something, return it.  But first, set the alignment
         if the address is a register.  */
      if (temp != 0)
        {
          if (GET_CODE (temp) == MEM && GET_CODE (XEXP (temp, 0)) == REG)
            mark_reg_pointer (XEXP (temp, 0), DECL_ALIGN (exp));

          return temp;
        }

      /* If the mode of DECL_RTL does not match that of the decl, it
         must be a promoted value.  We return a SUBREG of the wanted mode,
         but mark it so that we know that it was already extended.  */

      if (GET_CODE (DECL_RTL (exp)) == REG
          && GET_MODE (DECL_RTL (exp)) != DECL_MODE (exp))
        {
          /* Get the signedness used for this variable.  Ensure we get the
             same mode we got when the variable was declared.  */
          if (GET_MODE (DECL_RTL (exp))
              != promote_mode (type, DECL_MODE (exp), &unsignedp,
                               (TREE_CODE (exp) == RESULT_DECL ? 1 : 0)))
            abort ();

          temp = gen_lowpart_SUBREG (mode, DECL_RTL (exp));
          SUBREG_PROMOTED_VAR_P (temp) = 1;
          SUBREG_PROMOTED_UNSIGNED_SET (temp, unsignedp);
          return temp;
        }

      return DECL_RTL (exp);

    case INTEGER_CST:
      temp = immed_double_const (TREE_INT_CST_LOW (exp),
                                 TREE_INT_CST_HIGH (exp), mode);

      /* ??? If overflow is set, fold will have done an incomplete job,
         which can result in (plus xx (const_int 0)), which can get
         simplified by validate_replace_rtx during virtual register
         instantiation, which can result in unrecognizable insns.
         Avoid this by forcing all overflows into registers.  */
      if (TREE_CONSTANT_OVERFLOW (exp)
          && modifier != EXPAND_INITIALIZER)
        temp = force_reg (mode, temp);

      return temp;

    case VECTOR_CST:
      return const_vector_from_tree (exp);

    case CONST_DECL:
      return expand_expr (DECL_INITIAL (exp), target, VOIDmode, modifier);

    case REAL_CST:
      /* If optimized, generate immediate CONST_DOUBLE
         which will be turned into memory by reload if necessary.

         We used to force a register so that loop.c could see it.  But
         this does not allow gen_* patterns to perform optimizations with
         the constants.  It also produces two insns in cases like "x = 1.0;".
         On most machines, floating-point constants are not permitted in
         many insns, so we'd end up copying it to a register in any case.

         Now, we do the copying in expand_binop, if appropriate.  */
      return CONST_DOUBLE_FROM_REAL_VALUE (TREE_REAL_CST (exp),
                                           TYPE_MODE (TREE_TYPE (exp)));

    case COMPLEX_CST:
      /* Handle evaluating a complex constant in a CONCAT target.  */
      if (original_target && GET_CODE (original_target) == CONCAT)
        {
          enum machine_mode mode = TYPE_MODE (TREE_TYPE (TREE_TYPE (exp)));
          rtx rtarg, itarg;

          rtarg = XEXP (original_target, 0);
          itarg = XEXP (original_target, 1);

          /* Move the real and imaginary parts separately.  */
          op0 = expand_expr (TREE_REALPART (exp), rtarg, mode, 0);
          op1 = expand_expr (TREE_IMAGPART (exp), itarg, mode, 0);

          if (op0 != rtarg)
            emit_move_insn (rtarg, op0);
          if (op1 != itarg)
            emit_move_insn (itarg, op1);

          return original_target;
        }

      /* ... fall through ...  */

    case STRING_CST:
      temp = output_constant_def (exp, 1);

      /* temp contains a constant address.
         On RISC machines where a constant address isn't valid,
         make some insns to get that address into a register.  */
      if (modifier != EXPAND_CONST_ADDRESS
          && modifier != EXPAND_INITIALIZER
          && modifier != EXPAND_SUM
          && (! memory_address_p (mode, XEXP (temp, 0))
              || flag_force_addr))
        return replace_equiv_address (temp,
                                      copy_rtx (XEXP (temp, 0)));
      return temp;

    case EXPR_WITH_FILE_LOCATION:
      {
        rtx to_return;
        struct file_stack fs;

        fs.location = input_location;
        fs.next = expr_wfl_stack;
        input_filename = EXPR_WFL_FILENAME (exp);
        input_line = EXPR_WFL_LINENO (exp);
        expr_wfl_stack = &fs;
        if (EXPR_WFL_EMIT_LINE_NOTE (exp))
          emit_line_note (input_location);
        /* Possibly avoid switching back and forth here.  */
        to_return = expand_expr (EXPR_WFL_NODE (exp),
                                 (ignore ? const0_rtx : target),
                                 tmode, modifier);
        if (expr_wfl_stack != &fs)
          abort ();
        input_location = fs.location;
        expr_wfl_stack = fs.next;
        return to_return;
      }

    case SAVE_EXPR:
      context = decl_function_context (exp);

      /* If this SAVE_EXPR was at global context, assume we are an
         initialization function and move it into our context.  */
      if (context == 0)
        SAVE_EXPR_CONTEXT (exp) = current_function_decl;

      /* We treat inline_function_decl as an alias for the current function
         because that is the inline function whose vars, types, etc.
         are being merged into the current function.
         See expand_inline_function.  */
      if (context == current_function_decl || context == inline_function_decl)
        context = 0;

      /* If this is non-local, handle it.  */
      if (context)
        {
          /* The following call just exists to abort if the context is
             not of a containing function.  */
          find_function_data (context);

          temp = SAVE_EXPR_RTL (exp);
          if (temp && GET_CODE (temp) == REG)
            {
              put_var_into_stack (exp, /*rescan=*/true);
              temp = SAVE_EXPR_RTL (exp);
            }
          if (temp == 0 || GET_CODE (temp) != MEM)
            abort ();
          return
            replace_equiv_address (temp,
                                   fix_lexical_addr (XEXP (temp, 0), exp));
        }
      if (SAVE_EXPR_RTL (exp) == 0)
        {
          if (mode == VOIDmode)
            temp = const0_rtx;
          else
            temp = assign_temp (build_qualified_type (type,
                                                      (TYPE_QUALS (type)
                                                       | TYPE_QUAL_CONST)),
                                3, 0, 0);

          SAVE_EXPR_RTL (exp) = temp;
          if (!optimize && GET_CODE (temp) == REG)
            save_expr_regs = gen_rtx_EXPR_LIST (VOIDmode, temp,
                                                save_expr_regs);

          /* If the mode of TEMP does not match that of the expression, it
             must be a promoted value.  We pass store_expr a SUBREG of the
             wanted mode but mark it so that we know that it was already
             extended.  */

          if (GET_CODE (temp) == REG && GET_MODE (temp) != mode)
            {
              temp = gen_lowpart_SUBREG (mode, SAVE_EXPR_RTL (exp));
              promote_mode (type, mode, &unsignedp, 0);
              SUBREG_PROMOTED_VAR_P (temp) = 1;
              SUBREG_PROMOTED_UNSIGNED_SET (temp, unsignedp);
            }

          if (temp == const0_rtx)
            expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, 0);
          else
            store_expr (TREE_OPERAND (exp, 0), temp,
                        modifier == EXPAND_STACK_PARM ? 2 : 0);

          TREE_USED (exp) = 1;
        }

      /* If the mode of SAVE_EXPR_RTL does not match that of the expression, it
         must be a promoted value.  We return a SUBREG of the wanted mode,
         but mark it so that we know that it was already extended.  */

      if (GET_CODE (SAVE_EXPR_RTL (exp)) == REG
          && GET_MODE (SAVE_EXPR_RTL (exp)) != mode)
        {
          /* Compute the signedness and make the proper SUBREG.  */
          promote_mode (type, mode, &unsignedp, 0);
          temp = gen_lowpart_SUBREG (mode, SAVE_EXPR_RTL (exp));
          SUBREG_PROMOTED_VAR_P (temp) = 1;
          SUBREG_PROMOTED_UNSIGNED_SET (temp, unsignedp);
          return temp;
        }

      return SAVE_EXPR_RTL (exp);

    case UNSAVE_EXPR:
      {
        rtx temp;
        temp = expand_expr (TREE_OPERAND (exp, 0), target, tmode, modifier);
        TREE_OPERAND (exp, 0)
          = (*lang_hooks.unsave_expr_now) (TREE_OPERAND (exp, 0));
        return temp;
      }

    case PLACEHOLDER_EXPR:
      {
        tree old_list = placeholder_list;
        tree placeholder_expr = 0;

        exp = find_placeholder (exp, &placeholder_expr);
        if (exp == 0)
          abort ();

        placeholder_list = TREE_CHAIN (placeholder_expr);
        temp = expand_expr (exp, original_target, tmode, modifier);
        placeholder_list = old_list;
        return temp;
      }

    case WITH_RECORD_EXPR:
      /* Put the object on the placeholder list, expand our first operand,
         and pop the list.  */
      placeholder_list = tree_cons (TREE_OPERAND (exp, 1), NULL_TREE,
                                    placeholder_list);
      target = expand_expr (TREE_OPERAND (exp, 0), original_target, tmode,
                            modifier);
      placeholder_list = TREE_CHAIN (placeholder_list);
      return target;

    case GOTO_EXPR:
      if (TREE_CODE (TREE_OPERAND (exp, 0)) == LABEL_DECL)
        expand_goto (TREE_OPERAND (exp, 0));
      else
        expand_computed_goto (TREE_OPERAND (exp, 0));
      return const0_rtx;

    case EXIT_EXPR:
      expand_exit_loop_if_false (NULL,
                                 invert_truthvalue (TREE_OPERAND (exp, 0)));
      return const0_rtx;

    case LABELED_BLOCK_EXPR:
      if (LABELED_BLOCK_BODY (exp))
        expand_expr_stmt_value (LABELED_BLOCK_BODY (exp), 0, 1);
      /* Should perhaps use expand_label, but this is simpler and safer.  */
      do_pending_stack_adjust ();
      emit_label (label_rtx (LABELED_BLOCK_LABEL (exp)));
      return const0_rtx;

    case EXIT_BLOCK_EXPR:
      if (EXIT_BLOCK_RETURN (exp))
        sorry ("returned value in block_exit_expr");
      expand_goto (LABELED_BLOCK_LABEL (EXIT_BLOCK_LABELED_BLOCK (exp)));
      return const0_rtx;

    case LOOP_EXPR:
      push_temp_slots ();
      expand_start_loop (1);
      expand_expr_stmt_value (TREE_OPERAND (exp, 0), 0, 1);
      expand_end_loop ();
      pop_temp_slots ();

      return const0_rtx;

    case BIND_EXPR:
      {
        tree vars = TREE_OPERAND (exp, 0);

        /* Need to open a binding contour here because
           if there are any cleanups they must be contained here.  */
        expand_start_bindings (2);

        /* Mark the corresponding BLOCK for output in its proper place.  */
        if (TREE_OPERAND (exp, 2) != 0
            && ! TREE_USED (TREE_OPERAND (exp, 2)))
          (*lang_hooks.decls.insert_block) (TREE_OPERAND (exp, 2));

        /* If VARS have not yet been expanded, expand them now.  */
        while (vars)
          {
            if (!DECL_RTL_SET_P (vars))
              expand_decl (vars);
            expand_decl_init (vars);
            vars = TREE_CHAIN (vars);
          }

        temp = expand_expr (TREE_OPERAND (exp, 1), target, tmode, modifier);

        expand_end_bindings (TREE_OPERAND (exp, 0), 0, 0);

        return temp;
      }

    case RTL_EXPR:
      if (RTL_EXPR_SEQUENCE (exp))
        {
          if (RTL_EXPR_SEQUENCE (exp) == const0_rtx)
            abort ();
          emit_insn (RTL_EXPR_SEQUENCE (exp));
          RTL_EXPR_SEQUENCE (exp) = const0_rtx;
        }
      preserve_rtl_expr_result (RTL_EXPR_RTL (exp));
      free_temps_for_rtl_expr (exp);
      if (alt_rtl)
        *alt_rtl = RTL_EXPR_ALT_RTL (exp);
      return RTL_EXPR_RTL (exp);

    case CONSTRUCTOR:
      /* If we don't need the result, just ensure we evaluate any
         subexpressions.  */
      if (ignore)
        {
          tree elt;

          for (elt = CONSTRUCTOR_ELTS (exp); elt; elt = TREE_CHAIN (elt))
            expand_expr (TREE_VALUE (elt), const0_rtx, VOIDmode, 0);

          return const0_rtx;
        }

      /* All elts simple constants => refer to a constant in memory.  But
         if this is a non-BLKmode mode, let it store a field at a time
         since that should make a CONST_INT or CONST_DOUBLE when we
         fold.  Likewise, if we have a target we can use, it is best to
         store directly into the target unless the type is large enough
         that memcpy will be used.  If we are making an initializer and
         all operands are constant, put it in memory as well.

        FIXME: Avoid trying to fill vector constructors piece-meal.
        Output them with output_constant_def below unless we're sure
        they're zeros.  This should go away when vector initializers
        are treated like VECTOR_CST instead of arrays.
      */
      else if ((TREE_STATIC (exp)
                && ((mode == BLKmode
                     && ! (target != 0 && safe_from_p (target, exp, 1)))
                    || TREE_ADDRESSABLE (exp)
                    || (host_integerp (TYPE_SIZE_UNIT (type), 1)
                        && (! MOVE_BY_PIECES_P
                            (tree_low_cst (TYPE_SIZE_UNIT (type), 1),
                             TYPE_ALIGN (type)))
                        && ((TREE_CODE (type) == VECTOR_TYPE
                             && !is_zeros_p (exp))
                            || ! mostly_zeros_p (exp)))))
               || ((modifier == EXPAND_INITIALIZER
                    || modifier == EXPAND_CONST_ADDRESS)
                   && TREE_CONSTANT (exp)))
        {
          rtx constructor = output_constant_def (exp, 1);

          if (modifier != EXPAND_CONST_ADDRESS
              && modifier != EXPAND_INITIALIZER
              && modifier != EXPAND_SUM)
            constructor = validize_mem (constructor);

          return constructor;
        }
      else
        {
          /* Handle calls that pass values in multiple non-contiguous
             locations.  The Irix 6 ABI has examples of this.  */
          if (target == 0 || ! safe_from_p (target, exp, 1)
              || GET_CODE (target) == PARALLEL
              || modifier == EXPAND_STACK_PARM)
            target
              = assign_temp (build_qualified_type (type,
                                                   (TYPE_QUALS (type)
                                                    | (TREE_READONLY (exp)
                                                       * TYPE_QUAL_CONST))),
                             0, TREE_ADDRESSABLE (exp), 1);

          store_constructor (exp, target, 0, int_expr_size (exp));
          return target;
        }

    case INDIRECT_REF:
      {
        tree exp1 = TREE_OPERAND (exp, 0);
        tree index;
        tree string = string_constant (exp1, &index);

        /* Try to optimize reads from const strings.  */
        if (string
            && TREE_CODE (string) == STRING_CST
            && TREE_CODE (index) == INTEGER_CST
            && compare_tree_int (index, TREE_STRING_LENGTH (string)) < 0
            && GET_MODE_CLASS (mode) == MODE_INT
            && GET_MODE_SIZE (mode) == 1
            && modifier != EXPAND_WRITE)
          return gen_int_mode (TREE_STRING_POINTER (string)
                               [TREE_INT_CST_LOW (index)], mode);

        op0 = expand_expr (exp1, NULL_RTX, VOIDmode, EXPAND_SUM);
        op0 = memory_address (mode, op0);
        temp = gen_rtx_MEM (mode, op0);
        set_mem_attributes (temp, exp, 0);

        /* If we are writing to this object and its type is a record with
           readonly fields, we must mark it as readonly so it will
           conflict with readonly references to those fields.  */
        if (modifier == EXPAND_WRITE && readonly_fields_p (type))
          RTX_UNCHANGING_P (temp) = 1;

        return temp;
      }

    case ARRAY_REF:
      if (TREE_CODE (TREE_TYPE (TREE_OPERAND (exp, 0))) != ARRAY_TYPE)
        abort ();

      {
        tree array = TREE_OPERAND (exp, 0);
        tree domain = TYPE_DOMAIN (TREE_TYPE (array));
        tree low_bound = domain ? TYPE_MIN_VALUE (domain) : integer_zero_node;
        tree index = convert (sizetype, TREE_OPERAND (exp, 1));
        HOST_WIDE_INT i;

        /* Optimize the special-case of a zero lower bound.

           We convert the low_bound to sizetype to avoid some problems
           with constant folding.  (E.g. suppose the lower bound is 1,
           and its mode is QI.  Without the conversion,  (ARRAY
           +(INDEX-(unsigned char)1)) becomes ((ARRAY+(-(unsigned char)1))
           +INDEX), which becomes (ARRAY+255+INDEX).  Oops!)  */

        if (! integer_zerop (low_bound))
          index = size_diffop (index, convert (sizetype, low_bound));

        /* Fold an expression like: "foo"[2].
           This is not done in fold so it won't happen inside &.
           Don't fold if this is for wide characters since it's too
           difficult to do correctly and this is a very rare case.  */

        if (modifier != EXPAND_CONST_ADDRESS
            && modifier != EXPAND_INITIALIZER
            && modifier != EXPAND_MEMORY
            && TREE_CODE (array) == STRING_CST
            && TREE_CODE (index) == INTEGER_CST
            && compare_tree_int (index, TREE_STRING_LENGTH (array)) < 0
            && GET_MODE_CLASS (mode) == MODE_INT
            && GET_MODE_SIZE (mode) == 1)
          return gen_int_mode (TREE_STRING_POINTER (array)
                               [TREE_INT_CST_LOW (index)], mode);

        /* If this is a constant index into a constant array,
           just get the value from the array.  Handle both the cases when
           we have an explicit constructor and when our operand is a variable
           that was declared const.  */

        if (modifier != EXPAND_CONST_ADDRESS
            && modifier != EXPAND_INITIALIZER
            && modifier != EXPAND_MEMORY
            && TREE_CODE (array) == CONSTRUCTOR
            && ! TREE_SIDE_EFFECTS (array)
            && TREE_CODE (index) == INTEGER_CST
            && 0 > compare_tree_int (index,
                                     list_length (CONSTRUCTOR_ELTS
                                                  (TREE_OPERAND (exp, 0)))))
          {
            tree elem;

            for (elem = CONSTRUCTOR_ELTS (TREE_OPERAND (exp, 0)),
                 i = TREE_INT_CST_LOW (index);
                 elem != 0 && i != 0; i--, elem = TREE_CHAIN (elem))
              ;

            if (elem)
              return expand_expr (fold (TREE_VALUE (elem)), target, tmode,
                                  modifier);
          }

        else if (optimize >= 1
                 && modifier != EXPAND_CONST_ADDRESS
                 && modifier != EXPAND_INITIALIZER
                 && modifier != EXPAND_MEMORY
                 && TREE_READONLY (array) && ! TREE_SIDE_EFFECTS (array)
                 && TREE_CODE (array) == VAR_DECL && DECL_INITIAL (array)
                 && TREE_CODE (DECL_INITIAL (array)) != ERROR_MARK
                 && targetm.binds_local_p (array))
          {
            if (TREE_CODE (index) == INTEGER_CST)
              {
                tree init = DECL_INITIAL (array);

                if (TREE_CODE (init) == CONSTRUCTOR)
                  {
                    tree elem;

                    for (elem = CONSTRUCTOR_ELTS (init);
                         (elem
                          && !tree_int_cst_equal (TREE_PURPOSE (elem), index));
                         elem = TREE_CHAIN (elem))
                      ;

                    if (elem && !TREE_SIDE_EFFECTS (TREE_VALUE (elem)))
                      return expand_expr (fold (TREE_VALUE (elem)), target,
                                          tmode, modifier);
                  }
                else if (TREE_CODE (init) == STRING_CST
                         && 0 > compare_tree_int (index,
                                                  TREE_STRING_LENGTH (init)))
                  {
                    tree type = TREE_TYPE (TREE_TYPE (init));
                    enum machine_mode mode = TYPE_MODE (type);

                    if (GET_MODE_CLASS (mode) == MODE_INT
                        && GET_MODE_SIZE (mode) == 1)
                      return gen_int_mode (TREE_STRING_POINTER (init)
                                           [TREE_INT_CST_LOW (index)], mode);
                  }
              }
          }
      }
      goto normal_inner_ref;

    case COMPONENT_REF:
      /* If the operand is a CONSTRUCTOR, we can just extract the
         appropriate field if it is present.  */
      if (TREE_CODE (TREE_OPERAND (exp, 0)) == CONSTRUCTOR)
        {
          tree elt;

          for (elt = CONSTRUCTOR_ELTS (TREE_OPERAND (exp, 0)); elt;
               elt = TREE_CHAIN (elt))
            if (TREE_PURPOSE (elt) == TREE_OPERAND (exp, 1)
                /* We can normally use the value of the field in the
                   CONSTRUCTOR.  However, if this is a bitfield in
                   an integral mode that we can fit in a HOST_WIDE_INT,
                   we must mask only the number of bits in the bitfield,
                   since this is done implicitly by the constructor.  If
                   the bitfield does not meet either of those conditions,
                   we can't do this optimization.  */
                && (! DECL_BIT_FIELD (TREE_PURPOSE (elt))
                    || ((GET_MODE_CLASS (DECL_MODE (TREE_PURPOSE (elt)))
                         == MODE_INT)
                        && (GET_MODE_BITSIZE (DECL_MODE (TREE_PURPOSE (elt)))
                            <= HOST_BITS_PER_WIDE_INT))))
              {
                if (DECL_BIT_FIELD (TREE_PURPOSE (elt))
                    && modifier == EXPAND_STACK_PARM)
                  target = 0;
                op0 = expand_expr (TREE_VALUE (elt), target, tmode, modifier);
                if (DECL_BIT_FIELD (TREE_PURPOSE (elt)))
                  {
                    HOST_WIDE_INT bitsize
                      = TREE_INT_CST_LOW (DECL_SIZE (TREE_PURPOSE (elt)));
                    enum machine_mode imode
                      = TYPE_MODE (TREE_TYPE (TREE_PURPOSE (elt)));

                    if (TREE_UNSIGNED (TREE_TYPE (TREE_PURPOSE (elt))))
                      {
                        op1 = GEN_INT (((HOST_WIDE_INT) 1 << bitsize) - 1);
                        op0 = expand_and (imode, op0, op1, target);
                      }
                    else
                      {
                        tree count
                          = build_int_2 (GET_MODE_BITSIZE (imode) - bitsize,
                                         0);

                        op0 = expand_shift (LSHIFT_EXPR, imode, op0, count,
                                            target, 0);
                        op0 = expand_shift (RSHIFT_EXPR, imode, op0, count,
                                            target, 0);
                      }
                  }

                return op0;
              }
        }
      goto normal_inner_ref;

    case BIT_FIELD_REF:
    case ARRAY_RANGE_REF:
    normal_inner_ref:
      {
        enum machine_mode mode1;
        HOST_WIDE_INT bitsize, bitpos;
        tree offset;
        int volatilep = 0;
        tree tem = get_inner_reference (exp, &bitsize, &bitpos, &offset,
                                        &mode1, &unsignedp, &volatilep);
        rtx orig_op0;

        /* If we got back the original object, something is wrong.  Perhaps
           we are evaluating an expression too early.  In any event, don't
           infinitely recurse.  */
        if (tem == exp)
          abort ();

        /* If TEM's type is a union of variable size, pass TARGET to the inner
           computation, since it will need a temporary and TARGET is known
           to have to do.  This occurs in unchecked conversion in Ada.  */

        orig_op0 = op0
          = expand_expr (tem,
                         (TREE_CODE (TREE_TYPE (tem)) == UNION_TYPE
                          && (TREE_CODE (TYPE_SIZE (TREE_TYPE (tem)))
                              != INTEGER_CST)
                          && modifier != EXPAND_STACK_PARM
                          ? target : NULL_RTX),
                         VOIDmode,
                         (modifier == EXPAND_INITIALIZER
                          || modifier == EXPAND_CONST_ADDRESS
                          || modifier == EXPAND_STACK_PARM)
                         ? modifier : EXPAND_NORMAL);

        /* If this is a constant, put it into a register if it is a
           legitimate constant and OFFSET is 0 and memory if it isn't.  */
        if (CONSTANT_P (op0))
          {
            enum machine_mode mode = TYPE_MODE (TREE_TYPE (tem));
            if (mode != BLKmode && LEGITIMATE_CONSTANT_P (op0)
                && offset == 0)
              op0 = force_reg (mode, op0);
            else
              op0 = validize_mem (force_const_mem (mode, op0));
          }

        /* Otherwise, if this object not in memory and we either have an
           offset or a BLKmode result, put it there.  This case can't occur in
           C, but can in Ada if we have unchecked conversion of an expression
           from a scalar type to an array or record type or for an
           ARRAY_RANGE_REF whose type is BLKmode.  */
        else if (GET_CODE (op0) != MEM
                 && (offset != 0
                     || (code == ARRAY_RANGE_REF && mode == BLKmode)))
          {
            /* If the operand is a SAVE_EXPR, we can deal with this by
               forcing the SAVE_EXPR into memory.  */
            if (TREE_CODE (TREE_OPERAND (exp, 0)) == SAVE_EXPR)
              {
                put_var_into_stack (TREE_OPERAND (exp, 0),
                                    /*rescan=*/true);
                op0 = SAVE_EXPR_RTL (TREE_OPERAND (exp, 0));
              }
            else
              {
                tree nt
                  = build_qualified_type (TREE_TYPE (tem),
                                          (TYPE_QUALS (TREE_TYPE (tem))
                                           | TYPE_QUAL_CONST));
                rtx memloc = assign_temp (nt, 1, 1, 1);

                emit_move_insn (memloc, op0);
                op0 = memloc;
              }
          }

        if (offset != 0)
          {
            rtx offset_rtx = expand_expr (offset, NULL_RTX, VOIDmode,
                                          EXPAND_SUM);

            if (GET_CODE (op0) != MEM)
              abort ();

#ifdef POINTERS_EXTEND_UNSIGNED
            if (GET_MODE (offset_rtx) != Pmode)
              offset_rtx = convert_to_mode (Pmode, offset_rtx, 0);
#else
            if (GET_MODE (offset_rtx) != ptr_mode)
              offset_rtx = convert_to_mode (ptr_mode, offset_rtx, 0);
#endif

            if (GET_MODE (op0) == BLKmode
                /* A constant address in OP0 can have VOIDmode, we must
                   not try to call force_reg in that case.  */
                && GET_MODE (XEXP (op0, 0)) != VOIDmode
                && bitsize != 0
                && (bitpos % bitsize) == 0
                && (bitsize % GET_MODE_ALIGNMENT (mode1)) == 0
                && MEM_ALIGN (op0) == GET_MODE_ALIGNMENT (mode1))
              {
                op0 = adjust_address (op0, mode1, bitpos / BITS_PER_UNIT);
                bitpos = 0;
              }

            op0 = offset_address (op0, offset_rtx,
                                  highest_pow2_factor (offset));
          }

        /* If OFFSET is making OP0 more aligned than BIGGEST_ALIGNMENT,
           record its alignment as BIGGEST_ALIGNMENT.  */
        if (GET_CODE (op0) == MEM && bitpos == 0 && offset != 0
            && is_aligning_offset (offset, tem))
          set_mem_align (op0, BIGGEST_ALIGNMENT);

        /* Don't forget about volatility even if this is a bitfield.  */
        if (GET_CODE (op0) == MEM && volatilep && ! MEM_VOLATILE_P (op0))
          {
            if (op0 == orig_op0)
              op0 = copy_rtx (op0);

            MEM_VOLATILE_P (op0) = 1;
          }

        /* The following code doesn't handle CONCAT.
           Assume only bitpos == 0 can be used for CONCAT, due to
           one element arrays having the same mode as its element.  */
        if (GET_CODE (op0) == CONCAT)
          {
            if (bitpos != 0 || bitsize != GET_MODE_BITSIZE (GET_MODE (op0)))
              abort ();
            return op0;
          }

        /* In cases where an aligned union has an unaligned object
           as a field, we might be extracting a BLKmode value from
           an integer-mode (e.g., SImode) object.  Handle this case
           by doing the extract into an object as wide as the field
           (which we know to be the width of a basic mode), then
           storing into memory, and changing the mode to BLKmode.  */
        if (mode1 == VOIDmode
            || GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG
            || (mode1 != BLKmode && ! direct_load[(int) mode1]
                && GET_MODE_CLASS (mode) != MODE_COMPLEX_INT
                && GET_MODE_CLASS (mode) != MODE_COMPLEX_FLOAT
                && modifier != EXPAND_CONST_ADDRESS
                && modifier != EXPAND_INITIALIZER)
            /* If the field isn't aligned enough to fetch as a memref,
               fetch it as a bit field.  */
            || (mode1 != BLKmode
                && (((TYPE_ALIGN (TREE_TYPE (tem)) < GET_MODE_ALIGNMENT (mode)
                      || (bitpos % GET_MODE_ALIGNMENT (mode) != 0)
                      || (GET_CODE (op0) == MEM
                          && (MEM_ALIGN (op0) < GET_MODE_ALIGNMENT (mode1)
                              || (bitpos % GET_MODE_ALIGNMENT (mode1) != 0))))
                     && ((modifier == EXPAND_CONST_ADDRESS
                          || modifier == EXPAND_INITIALIZER)
                         ? STRICT_ALIGNMENT
                         : SLOW_UNALIGNED_ACCESS (mode1, MEM_ALIGN (op0))))
                    || (bitpos % BITS_PER_UNIT != 0)))
            /* If the type and the field are a constant size and the
               size of the type isn't the same size as the bitfield,
               we must use bitfield operations.  */
            || (bitsize >= 0
                && (TREE_CODE (TYPE_SIZE (TREE_TYPE (exp)))
                    == INTEGER_CST)
                && 0 != compare_tree_int (TYPE_SIZE (TREE_TYPE (exp)),
                                          bitsize)))
          {
            enum machine_mode ext_mode = mode;

            if (ext_mode == BLKmode
                && ! (target != 0 && GET_CODE (op0) == MEM
                      && GET_CODE (target) == MEM
                      && bitpos % BITS_PER_UNIT == 0))
              ext_mode = mode_for_size (bitsize, MODE_INT, 1);

            if (ext_mode == BLKmode)
              {
                if (target == 0)
                  target = assign_temp (type, 0, 1, 1);

                if (bitsize == 0)
                  return target;

                /* In this case, BITPOS must start at a byte boundary and
                   TARGET, if specified, must be a MEM.  */
                if (GET_CODE (op0) != MEM
                    || (target != 0 && GET_CODE (target) != MEM)
                    || bitpos % BITS_PER_UNIT != 0)
                  abort ();

                emit_block_move (target,
                                 adjust_address (op0, VOIDmode,
                                                 bitpos / BITS_PER_UNIT),
                                 GEN_INT ((bitsize + BITS_PER_UNIT - 1)
                                          / BITS_PER_UNIT),
                                 (modifier == EXPAND_STACK_PARM
                                  ? BLOCK_OP_CALL_PARM : BLOCK_OP_NORMAL));

                return target;
              }

            op0 = validize_mem (op0);

            if (GET_CODE (op0) == MEM && GET_CODE (XEXP (op0, 0)) == REG)
              mark_reg_pointer (XEXP (op0, 0), MEM_ALIGN (op0));

            op0 = extract_bit_field (op0, bitsize, bitpos, unsignedp,
                                     (modifier == EXPAND_STACK_PARM
                                      ? NULL_RTX : target),
                                     ext_mode, ext_mode,
                                     int_size_in_bytes (TREE_TYPE (tem)));

            /* If the result is a record type and BITSIZE is narrower than
               the mode of OP0, an integral mode, and this is a big endian
               machine, we must put the field into the high-order bits.  */
            if (TREE_CODE (type) == RECORD_TYPE && BYTES_BIG_ENDIAN
                && GET_MODE_CLASS (GET_MODE (op0)) == MODE_INT
                && bitsize < (HOST_WIDE_INT) GET_MODE_BITSIZE (GET_MODE (op0)))
              op0 = expand_shift (LSHIFT_EXPR, GET_MODE (op0), op0,
                                  size_int (GET_MODE_BITSIZE (GET_MODE (op0))
                                            - bitsize),
                                  op0, 1);

            if (mode == BLKmode)
              {
                rtx new = assign_temp (build_qualified_type
                                       ((*lang_hooks.types.type_for_mode)
                                        (ext_mode, 0),
                                        TYPE_QUAL_CONST), 0, 1, 1);

                emit_move_insn (new, op0);
                op0 = copy_rtx (new);
                PUT_MODE (op0, BLKmode);
                set_mem_attributes (op0, exp, 1);
              }

            return op0;
          }

        /* If the result is BLKmode, use that to access the object
           now as well.  */
        if (mode == BLKmode)
          mode1 = BLKmode;

        /* Get a reference to just this component.  */
        if (modifier == EXPAND_CONST_ADDRESS
            || modifier == EXPAND_SUM || modifier == EXPAND_INITIALIZER)
          op0 = adjust_address_nv (op0, mode1, bitpos / BITS_PER_UNIT);
        else
          op0 = adjust_address (op0, mode1, bitpos / BITS_PER_UNIT);

        if (op0 == orig_op0)
          op0 = copy_rtx (op0);

        set_mem_attributes (op0, exp, 0);
        if (GET_CODE (XEXP (op0, 0)) == REG)
          mark_reg_pointer (XEXP (op0, 0), MEM_ALIGN (op0));

        MEM_VOLATILE_P (op0) |= volatilep;
        if (mode == mode1 || mode1 == BLKmode || mode1 == tmode
            || modifier == EXPAND_CONST_ADDRESS
            || modifier == EXPAND_INITIALIZER)
          return op0;
        else if (target == 0)
          target = gen_reg_rtx (tmode != VOIDmode ? tmode : mode);

        convert_move (target, op0, unsignedp);
        return target;
      }

    case VTABLE_REF:
      {
        rtx insn, before = get_last_insn (), vtbl_ref;

        /* Evaluate the interior expression.  */
        subtarget = expand_expr (TREE_OPERAND (exp, 0), target,
                                 tmode, modifier);

        /* Get or create an instruction off which to hang a note.  */
        if (REG_P (subtarget))
          {
            target = subtarget;
            insn = get_last_insn ();
            if (insn == before)
              abort ();
            if (! INSN_P (insn))
              insn = prev_nonnote_insn (insn);
          }
        else
          {
            target = gen_reg_rtx (GET_MODE (subtarget));
            insn = emit_move_insn (target, subtarget);
          }

        /* Collect the data for the note.  */
        vtbl_ref = XEXP (DECL_RTL (TREE_OPERAND (exp, 1)), 0);
        vtbl_ref = plus_constant (vtbl_ref,
                                  tree_low_cst (TREE_OPERAND (exp, 2), 0));
        /* Discard the initial CONST that was added.  */
        vtbl_ref = XEXP (vtbl_ref, 0);

        REG_NOTES (insn)
          = gen_rtx_EXPR_LIST (REG_VTABLE_REF, vtbl_ref, REG_NOTES (insn));

        return target;
      }

      /* Intended for a reference to a buffer of a file-object in Pascal.
         But it's not certain that a special tree code will really be
         necessary for these.  INDIRECT_REF might work for them.  */
    case BUFFER_REF:
      abort ();

    case IN_EXPR:
      {
        /* Pascal set IN expression.

           Algorithm:
               rlo       = set_low - (set_low%bits_per_word);
               the_word  = set [ (index - rlo)/bits_per_word ];
               bit_index = index % bits_per_word;
               bitmask   = 1 << bit_index;
               return !!(the_word & bitmask);  */

        tree set = TREE_OPERAND (exp, 0);
        tree index = TREE_OPERAND (exp, 1);
        int iunsignedp = TREE_UNSIGNED (TREE_TYPE (index));
        tree set_type = TREE_TYPE (set);
        tree set_low_bound = TYPE_MIN_VALUE (TYPE_DOMAIN (set_type));
        tree set_high_bound = TYPE_MAX_VALUE (TYPE_DOMAIN (set_type));
        rtx index_val = expand_expr (index, 0, VOIDmode, 0);
        rtx lo_r = expand_expr (set_low_bound, 0, VOIDmode, 0);
        rtx hi_r = expand_expr (set_high_bound, 0, VOIDmode, 0);
        rtx setval = expand_expr (set, 0, VOIDmode, 0);
        rtx setaddr = XEXP (setval, 0);
        enum machine_mode index_mode = TYPE_MODE (TREE_TYPE (index));
        rtx rlow;
        rtx diff, quo, rem, addr, bit, result;

        /* If domain is empty, answer is no.  Likewise if index is constant
           and out of bounds.  */
        if (((TREE_CODE (set_high_bound) == INTEGER_CST
             && TREE_CODE (set_low_bound) == INTEGER_CST
             && tree_int_cst_lt (set_high_bound, set_low_bound))
             || (TREE_CODE (index) == INTEGER_CST
                 && TREE_CODE (set_low_bound) == INTEGER_CST
                 && tree_int_cst_lt (index, set_low_bound))
             || (TREE_CODE (set_high_bound) == INTEGER_CST
                 && TREE_CODE (index) == INTEGER_CST
                 && tree_int_cst_lt (set_high_bound, index))))
          return const0_rtx;

        if (target == 0)
          target = gen_reg_rtx (tmode != VOIDmode ? tmode : mode);

        /* If we get here, we have to generate the code for both cases
           (in range and out of range).  */

        op0 = gen_label_rtx ();
        op1 = gen_label_rtx ();

        if (! (GET_CODE (index_val) == CONST_INT
               && GET_CODE (lo_r) == CONST_INT))
          emit_cmp_and_jump_insns (index_val, lo_r, LT, NULL_RTX,
                                   GET_MODE (index_val), iunsignedp, op1);

        if (! (GET_CODE (index_val) == CONST_INT
               && GET_CODE (hi_r) == CONST_INT))
          emit_cmp_and_jump_insns (index_val, hi_r, GT, NULL_RTX,
                                   GET_MODE (index_val), iunsignedp, op1);

        /* Calculate the element number of bit zero in the first word
           of the set.  */
        if (GET_CODE (lo_r) == CONST_INT)
          rlow = GEN_INT (INTVAL (lo_r)
                          & ~((HOST_WIDE_INT) 1 << BITS_PER_UNIT));
        else
          rlow = expand_binop (index_mode, and_optab, lo_r,
                               GEN_INT (~((HOST_WIDE_INT) 1 << BITS_PER_UNIT)),
                               NULL_RTX, iunsignedp, OPTAB_LIB_WIDEN);

        diff = expand_binop (index_mode, sub_optab, index_val, rlow,
                             NULL_RTX, iunsignedp, OPTAB_LIB_WIDEN);

        quo = expand_divmod (0, TRUNC_DIV_EXPR, index_mode, diff,
                             GEN_INT (BITS_PER_UNIT), NULL_RTX, iunsignedp);
        rem = expand_divmod (1, TRUNC_MOD_EXPR, index_mode, index_val,
                             GEN_INT (BITS_PER_UNIT), NULL_RTX, iunsignedp);

        addr = memory_address (byte_mode,
                               expand_binop (index_mode, add_optab, diff,
                                             setaddr, NULL_RTX, iunsignedp,
                                             OPTAB_LIB_WIDEN));

        /* Extract the bit we want to examine.  */
        bit = expand_shift (RSHIFT_EXPR, byte_mode,
                            gen_rtx_MEM (byte_mode, addr),
                            make_tree (TREE_TYPE (index), rem),
                            NULL_RTX, 1);
        result = expand_binop (byte_mode, and_optab, bit, const1_rtx,
                               GET_MODE (target) == byte_mode ? target : 0,
                               1, OPTAB_LIB_WIDEN);

        if (result != target)
          convert_move (target, result, 1);

        /* Output the code to handle the out-of-range case.  */
        emit_jump (op0);
        emit_label (op1);
        emit_move_insn (target, const0_rtx);
        emit_label (op0);
        return target;
      }

    case WITH_CLEANUP_EXPR:
      if (WITH_CLEANUP_EXPR_RTL (exp) == 0)
        {
          WITH_CLEANUP_EXPR_RTL (exp)
            = expand_expr (TREE_OPERAND (exp, 0), target, tmode, modifier);
          expand_decl_cleanup_eh (NULL_TREE, TREE_OPERAND (exp, 1),
                                  CLEANUP_EH_ONLY (exp));

          /* That's it for this cleanup.  */
          TREE_OPERAND (exp, 1) = 0;
        }
      return WITH_CLEANUP_EXPR_RTL (exp);

    case CLEANUP_POINT_EXPR:
      {
        /* Start a new binding layer that will keep track of all cleanup
           actions to be performed.  */
        expand_start_bindings (2);

        target_temp_slot_level = temp_slot_level;

        op0 = expand_expr (TREE_OPERAND (exp, 0), target, tmode, modifier);
        /* If we're going to use this value, load it up now.  */
        if (! ignore)
          op0 = force_not_mem (op0);
        preserve_temp_slots (op0);
        expand_end_bindings (NULL_TREE, 0, 0);
      }
      return op0;

    case CALL_EXPR:
      /* Check for a built-in function.  */
      if (TREE_CODE (TREE_OPERAND (exp, 0)) == ADDR_EXPR
          && (TREE_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0))
              == FUNCTION_DECL)
          && DECL_BUILT_IN (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))
        {
          if (DECL_BUILT_IN_CLASS (TREE_OPERAND (TREE_OPERAND (exp, 0), 0))
              == BUILT_IN_FRONTEND)
            return (*lang_hooks.expand_expr) (exp, original_target,
                                              tmode, modifier,
                                              alt_rtl);
          else
            return expand_builtin (exp, target, subtarget, tmode, ignore);
        }

      return expand_call (exp, target, ignore);

    case NON_LVALUE_EXPR:
    case NOP_EXPR:
    case CONVERT_EXPR:
    case REFERENCE_EXPR:
      if (TREE_OPERAND (exp, 0) == error_mark_node)
        return const0_rtx;

      if (TREE_CODE (type) == UNION_TYPE)
        {
          tree valtype = TREE_TYPE (TREE_OPERAND (exp, 0));

          /* If both input and output are BLKmode, this conversion isn't doing
             anything except possibly changing memory attribute.  */
          if (mode == BLKmode && TYPE_MODE (valtype) == BLKmode)
            {
              rtx result = expand_expr (TREE_OPERAND (exp, 0), target, tmode,
                                        modifier);

              result = copy_rtx (result);
              set_mem_attributes (result, exp, 0);
              return result;
            }

          if (target == 0)
            {
              if (TYPE_MODE (type) != BLKmode)
                target = gen_reg_rtx (TYPE_MODE (type));
              else
                target = assign_temp (type, 0, 1, 1);
            }

          if (GET_CODE (target) == MEM)
            /* Store data into beginning of memory target.  */
            store_expr (TREE_OPERAND (exp, 0),
                        adjust_address (target, TYPE_MODE (valtype), 0),
                        modifier == EXPAND_STACK_PARM ? 2 : 0);

          else if (GET_CODE (target) == REG)
            /* Store this field into a union of the proper type.  */
            store_field (target,
                         MIN ((int_size_in_bytes (TREE_TYPE
                                                  (TREE_OPERAND (exp, 0)))
                               * BITS_PER_UNIT),
                              (HOST_WIDE_INT) GET_MODE_BITSIZE (mode)),
                         0, TYPE_MODE (valtype), TREE_OPERAND (exp, 0),
                         VOIDmode, 0, type, 0);
          else
            abort ();

          /* Return the entire union.  */
          return target;
        }

      if (mode == TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))))
        {
          op0 = expand_expr (TREE_OPERAND (exp, 0), target, VOIDmode,
                             modifier);

          /* If the signedness of the conversion differs and OP0 is
             a promoted SUBREG, clear that indication since we now
             have to do the proper extension.  */
          if (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0))) != unsignedp
              && GET_CODE (op0) == SUBREG)
            SUBREG_PROMOTED_VAR_P (op0) = 0;

          return op0;
        }

      op0 = expand_expr (TREE_OPERAND (exp, 0), NULL_RTX, mode, modifier);
      if (GET_MODE (op0) == mode)
        return op0;

      /* If OP0 is a constant, just convert it into the proper mode.  */
      if (CONSTANT_P (op0))
        {
          tree inner_type = TREE_TYPE (TREE_OPERAND (exp, 0));
          enum machine_mode inner_mode = TYPE_MODE (inner_type);

          if (modifier == EXPAND_INITIALIZER)
            return simplify_gen_subreg (mode, op0, inner_mode,
                                        subreg_lowpart_offset (mode,
                                                               inner_mode));
          else
            return convert_modes (mode, inner_mode, op0,
                                  TREE_UNSIGNED (inner_type));
        }

      if (modifier == EXPAND_INITIALIZER)
        return gen_rtx_fmt_e (unsignedp ? ZERO_EXTEND : SIGN_EXTEND, mode, op0);

      if (target == 0)
        return
          convert_to_mode (mode, op0,
                           TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0))));
      else
        convert_move (target, op0,
                      TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0))));
      return target;

    case VIEW_CONVERT_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), NULL_RTX, mode, modifier);

      /* If the input and output modes are both the same, we are done.
         Otherwise, if neither mode is BLKmode and both are integral and within
         a word, we can use gen_lowpart.  If neither is true, make sure the
         operand is in memory and convert the MEM to the new mode.  */
      if (TYPE_MODE (type) == GET_MODE (op0))
        ;
      else if (TYPE_MODE (type) != BLKmode && GET_MODE (op0) != BLKmode
               && GET_MODE_CLASS (GET_MODE (op0)) == MODE_INT
               && GET_MODE_CLASS (TYPE_MODE (type)) == MODE_INT
               && GET_MODE_SIZE (TYPE_MODE (type)) <= UNITS_PER_WORD
               && GET_MODE_SIZE (GET_MODE (op0)) <= UNITS_PER_WORD)
        op0 = gen_lowpart (TYPE_MODE (type), op0);
      else if (GET_CODE (op0) != MEM)
        {
          /* If the operand is not a MEM, force it into memory.  Since we
             are going to be be changing the mode of the MEM, don't call
             force_const_mem for constants because we don't allow pool
             constants to change mode.  */
          tree inner_type = TREE_TYPE (TREE_OPERAND (exp, 0));

          if (TREE_ADDRESSABLE (exp))
            abort ();

          if (target == 0 || GET_MODE (target) != TYPE_MODE (inner_type))
            target
              = assign_stack_temp_for_type
                (TYPE_MODE (inner_type),
                 GET_MODE_SIZE (TYPE_MODE (inner_type)), 0, inner_type);

          emit_move_insn (target, op0);
          op0 = target;
        }

      /* At this point, OP0 is in the correct mode.  If the output type is such
         that the operand is known to be aligned, indicate that it is.
         Otherwise, we need only be concerned about alignment for non-BLKmode
         results.  */
      if (GET_CODE (op0) == MEM)
        {
          op0 = copy_rtx (op0);

          if (TYPE_ALIGN_OK (type))
            set_mem_align (op0, MAX (MEM_ALIGN (op0), TYPE_ALIGN (type)));
          else if (TYPE_MODE (type) != BLKmode && STRICT_ALIGNMENT
                   && MEM_ALIGN (op0) < GET_MODE_ALIGNMENT (TYPE_MODE (type)))
            {
              tree inner_type = TREE_TYPE (TREE_OPERAND (exp, 0));
              HOST_WIDE_INT temp_size
                = MAX (int_size_in_bytes (inner_type),
                       (HOST_WIDE_INT) GET_MODE_SIZE (TYPE_MODE (type)));
              rtx new = assign_stack_temp_for_type (TYPE_MODE (type),
                                                    temp_size, 0, type);
              rtx new_with_op0_mode = adjust_address (new, GET_MODE (op0), 0);

              if (TREE_ADDRESSABLE (exp))
                abort ();

              if (GET_MODE (op0) == BLKmode)
                emit_block_move (new_with_op0_mode, op0,
                                 GEN_INT (GET_MODE_SIZE (TYPE_MODE (type))),
                                 (modifier == EXPAND_STACK_PARM
                                  ? BLOCK_OP_CALL_PARM : BLOCK_OP_NORMAL));
              else
                emit_move_insn (new_with_op0_mode, op0);

              op0 = new;
            }

          op0 = adjust_address (op0, TYPE_MODE (type), 0);
        }

      return op0;

    case PLUS_EXPR:
      this_optab = ! unsignedp && flag_trapv
                   && (GET_MODE_CLASS (mode) == MODE_INT)
                   ? addv_optab : add_optab;

      /* If we are adding a constant, an RTL_EXPR that is sp, fp, or ap, and
         something else, make sure we add the register to the constant and
         then to the other thing.  This case can occur during strength
         reduction and doing it this way will produce better code if the
         frame pointer or argument pointer is eliminated.

         fold-const.c will ensure that the constant is always in the inner
         PLUS_EXPR, so the only case we need to do anything about is if
         sp, ap, or fp is our second argument, in which case we must swap
         the innermost first argument and our second argument.  */

      if (TREE_CODE (TREE_OPERAND (exp, 0)) == PLUS_EXPR
          && TREE_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 1)) == INTEGER_CST
          && TREE_CODE (TREE_OPERAND (exp, 1)) == RTL_EXPR
          && (RTL_EXPR_RTL (TREE_OPERAND (exp, 1)) == frame_pointer_rtx
              || RTL_EXPR_RTL (TREE_OPERAND (exp, 1)) == stack_pointer_rtx
              || RTL_EXPR_RTL (TREE_OPERAND (exp, 1)) == arg_pointer_rtx))
        {
          tree t = TREE_OPERAND (exp, 1);

          TREE_OPERAND (exp, 1) = TREE_OPERAND (TREE_OPERAND (exp, 0), 0);
          TREE_OPERAND (TREE_OPERAND (exp, 0), 0) = t;
        }

      /* If the result is to be ptr_mode and we are adding an integer to
         something, we might be forming a constant.  So try to use
         plus_constant.  If it produces a sum and we can't accept it,
         use force_operand.  This allows P = &ARR[const] to generate
         efficient code on machines where a SYMBOL_REF is not a valid
         address.

         If this is an EXPAND_SUM call, always return the sum.  */
      if (modifier == EXPAND_SUM || modifier == EXPAND_INITIALIZER
          || (mode == ptr_mode && (unsignedp || ! flag_trapv)))
        {
          if (modifier == EXPAND_STACK_PARM)
            target = 0;
          if (TREE_CODE (TREE_OPERAND (exp, 0)) == INTEGER_CST
              && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
              && TREE_CONSTANT (TREE_OPERAND (exp, 1)))
            {
              rtx constant_part;

              op1 = expand_expr (TREE_OPERAND (exp, 1), subtarget, VOIDmode,
                                 EXPAND_SUM);
              /* Use immed_double_const to ensure that the constant is
                 truncated according to the mode of OP1, then sign extended
                 to a HOST_WIDE_INT.  Using the constant directly can result
                 in non-canonical RTL in a 64x32 cross compile.  */
              constant_part
                = immed_double_const (TREE_INT_CST_LOW (TREE_OPERAND (exp, 0)),
                                      (HOST_WIDE_INT) 0,
                                      TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 1))));
              op1 = plus_constant (op1, INTVAL (constant_part));
              if (modifier != EXPAND_SUM && modifier != EXPAND_INITIALIZER)
                op1 = force_operand (op1, target);
              return op1;
            }

          else if (TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST
                   && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_INT
                   && TREE_CONSTANT (TREE_OPERAND (exp, 0)))
            {
              rtx constant_part;

              op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode,
                                 (modifier == EXPAND_INITIALIZER
                                 ? EXPAND_INITIALIZER : EXPAND_SUM));
              if (! CONSTANT_P (op0))
                {
                  op1 = expand_expr (TREE_OPERAND (exp, 1), NULL_RTX,
                                     VOIDmode, modifier);
                  /* Return a PLUS if modifier says it's OK.  */
                  if (modifier == EXPAND_SUM
                      || modifier == EXPAND_INITIALIZER)
                    return simplify_gen_binary (PLUS, mode, op0, op1);
                  goto binop2;
                }
              /* Use immed_double_const to ensure that the constant is
                 truncated according to the mode of OP1, then sign extended
                 to a HOST_WIDE_INT.  Using the constant directly can result
                 in non-canonical RTL in a 64x32 cross compile.  */
              constant_part
                = immed_double_const (TREE_INT_CST_LOW (TREE_OPERAND (exp, 1)),
                                      (HOST_WIDE_INT) 0,
                                      TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))));
              op0 = plus_constant (op0, INTVAL (constant_part));
              if (modifier != EXPAND_SUM && modifier != EXPAND_INITIALIZER)
                op0 = force_operand (op0, target);
              return op0;
            }
        }

      /* No sense saving up arithmetic to be done
         if it's all in the wrong mode to form part of an address.
         And force_operand won't know whether to sign-extend or
         zero-extend.  */
      if ((modifier != EXPAND_SUM && modifier != EXPAND_INITIALIZER)
          || mode != ptr_mode)
        {
          expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                           subtarget, &op0, &op1, 0);
          if (op0 == const0_rtx)
            return op1;
          if (op1 == const0_rtx)
            return op0;
          goto binop2;
        }

      expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                       subtarget, &op0, &op1, modifier);
      return simplify_gen_binary (PLUS, mode, op0, op1);

    case MINUS_EXPR:
      /* For initializers, we are allowed to return a MINUS of two
         symbolic constants.  Here we handle all cases when both operands
         are constant.  */
      /* Handle difference of two symbolic constants,
         for the sake of an initializer.  */
      if ((modifier == EXPAND_SUM || modifier == EXPAND_INITIALIZER)
          && really_constant_p (TREE_OPERAND (exp, 0))
          && really_constant_p (TREE_OPERAND (exp, 1)))
        {
          expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                           NULL_RTX, &op0, &op1, modifier);

          /* If the last operand is a CONST_INT, use plus_constant of
             the negated constant.  Else make the MINUS.  */
          if (GET_CODE (op1) == CONST_INT)
            return plus_constant (op0, - INTVAL (op1));
          else
            return gen_rtx_MINUS (mode, op0, op1);
        }

      this_optab = ! unsignedp && flag_trapv
                   && (GET_MODE_CLASS(mode) == MODE_INT)
                   ? subv_optab : sub_optab;

      /* No sense saving up arithmetic to be done
         if it's all in the wrong mode to form part of an address.
         And force_operand won't know whether to sign-extend or
         zero-extend.  */
      if ((modifier != EXPAND_SUM && modifier != EXPAND_INITIALIZER)
          || mode != ptr_mode)
        goto binop;

      expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                       subtarget, &op0, &op1, modifier);

      /* Convert A - const to A + (-const).  */
      if (GET_CODE (op1) == CONST_INT)
        {
          op1 = negate_rtx (mode, op1);
          return simplify_gen_binary (PLUS, mode, op0, op1);
        }

      goto binop2;

    case MULT_EXPR:
      /* If first operand is constant, swap them.
         Thus the following special case checks need only
         check the second operand.  */
      if (TREE_CODE (TREE_OPERAND (exp, 0)) == INTEGER_CST)
        {
          tree t1 = TREE_OPERAND (exp, 0);
          TREE_OPERAND (exp, 0) = TREE_OPERAND (exp, 1);
          TREE_OPERAND (exp, 1) = t1;
        }

      /* Attempt to return something suitable for generating an
         indexed address, for machines that support that.  */

      if (modifier == EXPAND_SUM && mode == ptr_mode
          && host_integerp (TREE_OPERAND (exp, 1), 0))
        {
          tree exp1 = TREE_OPERAND (exp, 1);

          op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode,
                             EXPAND_SUM);

          if (GET_CODE (op0) != REG)
            op0 = force_operand (op0, NULL_RTX);
          if (GET_CODE (op0) != REG)
            op0 = copy_to_mode_reg (mode, op0);

          return gen_rtx_MULT (mode, op0,
                               gen_int_mode (tree_low_cst (exp1, 0),
                                             TYPE_MODE (TREE_TYPE (exp1))));
        }

      if (modifier == EXPAND_STACK_PARM)
        target = 0;

      /* Check for multiplying things that have been extended
         from a narrower type.  If this machine supports multiplying
         in that narrower type with a result in the desired type,
         do it that way, and avoid the explicit type-conversion.  */
      if (TREE_CODE (TREE_OPERAND (exp, 0)) == NOP_EXPR
          && TREE_CODE (type) == INTEGER_TYPE
          && (TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))
              < TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (exp, 0))))
          && ((TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST
               && int_fits_type_p (TREE_OPERAND (exp, 1),
                                   TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))
               /* Don't use a widening multiply if a shift will do.  */
               && ((GET_MODE_BITSIZE (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 1))))
                    > HOST_BITS_PER_WIDE_INT)
                   || exact_log2 (TREE_INT_CST_LOW (TREE_OPERAND (exp, 1))) < 0))
              ||
              (TREE_CODE (TREE_OPERAND (exp, 1)) == NOP_EXPR
               && (TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 1), 0)))
                   ==
                   TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0))))
               /* If both operands are extended, they must either both
                  be zero-extended or both be sign-extended.  */
               && (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 1), 0)))
                   ==
                   TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))))))
        {
          tree op0type = TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0));
          enum machine_mode innermode = TYPE_MODE (op0type);
          bool zextend_p = TREE_UNSIGNED (op0type);
          optab other_optab = zextend_p ? smul_widen_optab : umul_widen_optab;
          this_optab = zextend_p ? umul_widen_optab : smul_widen_optab;

          if (mode == GET_MODE_WIDER_MODE (innermode))
            {
              if (this_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
                {
                  if (TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST)
                    expand_operands (TREE_OPERAND (TREE_OPERAND (exp, 0), 0),
                                     TREE_OPERAND (exp, 1),
                                     NULL_RTX, &op0, &op1, 0);
                  else
                    expand_operands (TREE_OPERAND (TREE_OPERAND (exp, 0), 0),
                                     TREE_OPERAND (TREE_OPERAND (exp, 1), 0),
                                     NULL_RTX, &op0, &op1, 0);
                  goto binop2;
                }
              else if (other_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing
                       && innermode == word_mode)
                {
                  rtx htem, hipart;
                  op0 = expand_expr (TREE_OPERAND (TREE_OPERAND (exp, 0), 0),
                                     NULL_RTX, VOIDmode, 0);
                  if (TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST)
                    op1 = convert_modes (innermode, mode,
                                         expand_expr (TREE_OPERAND (exp, 1),
                                                      NULL_RTX, VOIDmode, 0),
                                         unsignedp);
                  else
                    op1 = expand_expr (TREE_OPERAND (TREE_OPERAND (exp, 1), 0),
                                       NULL_RTX, VOIDmode, 0);
                  temp = expand_binop (mode, other_optab, op0, op1, target,
                                       unsignedp, OPTAB_LIB_WIDEN);
                  hipart = gen_highpart (innermode, temp);
                  htem = expand_mult_highpart_adjust (innermode, hipart,
                                                      op0, op1, hipart,
                                                      zextend_p);
                  if (htem != hipart)
                    emit_move_insn (hipart, htem);
                  return temp;
                }
            }
        }
      expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                       subtarget, &op0, &op1, 0);
      return expand_mult (mode, op0, op1, target, unsignedp);

    case TRUNC_DIV_EXPR:
    case FLOOR_DIV_EXPR:
    case CEIL_DIV_EXPR:
    case ROUND_DIV_EXPR:
    case EXACT_DIV_EXPR:
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      /* Possible optimization: compute the dividend with EXPAND_SUM
         then if the divisor is constant can optimize the case
         where some terms of the dividend have coeffs divisible by it.  */
      expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                       subtarget, &op0, &op1, 0);
      return expand_divmod (0, code, mode, op0, op1, target, unsignedp);

    case RDIV_EXPR:
      /* Emit a/b as a*(1/b).  Later we may manage CSE the reciprocal saving
         expensive divide.  If not, combine will rebuild the original
         computation.  */
      if (flag_unsafe_math_optimizations && optimize && !optimize_size
          && TREE_CODE (type) == REAL_TYPE
          && !real_onep (TREE_OPERAND (exp, 0)))
        return expand_expr (build (MULT_EXPR, type, TREE_OPERAND (exp, 0),
                                   build (RDIV_EXPR, type,
                                          build_real (type, dconst1),
                                          TREE_OPERAND (exp, 1))),
                            target, tmode, modifier);
      this_optab = sdiv_optab;
      goto binop;

    case TRUNC_MOD_EXPR:
    case FLOOR_MOD_EXPR:
    case CEIL_MOD_EXPR:
    case ROUND_MOD_EXPR:
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                       subtarget, &op0, &op1, 0);
      return expand_divmod (1, code, mode, op0, op1, target, unsignedp);

    case FIX_ROUND_EXPR:
    case FIX_FLOOR_EXPR:
    case FIX_CEIL_EXPR:
      abort ();                 /* Not used for C.  */

    case FIX_TRUNC_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), NULL_RTX, VOIDmode, 0);
      if (target == 0 || modifier == EXPAND_STACK_PARM)
        target = gen_reg_rtx (mode);
      expand_fix (target, op0, unsignedp);
      return target;

    case FLOAT_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), NULL_RTX, VOIDmode, 0);
      if (target == 0 || modifier == EXPAND_STACK_PARM)
        target = gen_reg_rtx (mode);
      /* expand_float can't figure out what to do if FROM has VOIDmode.
         So give it the correct mode.  With -O, cse will optimize this.  */
      if (GET_MODE (op0) == VOIDmode)
        op0 = copy_to_mode_reg (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))),
                                op0);
      expand_float (target, op0,
                    TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0))));
      return target;

    case NEGATE_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      temp = expand_unop (mode,
                          ! unsignedp && flag_trapv
                          && (GET_MODE_CLASS(mode) == MODE_INT)
                          ? negv_optab : neg_optab, op0, target, 0);
      if (temp == 0)
        abort ();
      return temp;

    case ABS_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
      if (modifier == EXPAND_STACK_PARM)
        target = 0;

      /* ABS_EXPR is not valid for complex arguments.  */
      if (GET_MODE_CLASS (mode) == MODE_COMPLEX_INT
          || GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT)
        abort ();

      /* Unsigned abs is simply the operand.  Testing here means we don't
         risk generating incorrect code below.  */
      if (TREE_UNSIGNED (type))
        return op0;

      return expand_abs (mode, op0, target, unsignedp,
                         safe_from_p (target, TREE_OPERAND (exp, 0), 1));

    case MAX_EXPR:
    case MIN_EXPR:
      target = original_target;
      if (target == 0
          || modifier == EXPAND_STACK_PARM
          || (GET_CODE (target) == MEM && MEM_VOLATILE_P (target))
          || GET_MODE (target) != mode
          || (GET_CODE (target) == REG
              && REGNO (target) < FIRST_PSEUDO_REGISTER))
        target = gen_reg_rtx (mode);
      expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                       target, &op0, &op1, 0);

      /* First try to do it with a special MIN or MAX instruction.
         If that does not win, use a conditional jump to select the proper
         value.  */
      this_optab = (unsignedp
                    ? (code == MIN_EXPR ? umin_optab : umax_optab)
                    : (code == MIN_EXPR ? smin_optab : smax_optab));

      temp = expand_binop (mode, this_optab, op0, op1, target, unsignedp,
                           OPTAB_WIDEN);
      if (temp != 0)
        return temp;

      /* At this point, a MEM target is no longer useful; we will get better
         code without it.  */

      if (GET_CODE (target) == MEM)
        target = gen_reg_rtx (mode);

      /* If op1 was placed in target, swap op0 and op1.  */
      if (target != op0 && target == op1)
        {
          rtx tem = op0;
          op0 = op1;
          op1 = tem;
        }

      if (target != op0)
        emit_move_insn (target, op0);

      op0 = gen_label_rtx ();

      /* If this mode is an integer too wide to compare properly,
         compare word by word.  Rely on cse to optimize constant cases.  */
      if (GET_MODE_CLASS (mode) == MODE_INT
          && ! can_compare_p (GE, mode, ccp_jump))
        {
          if (code == MAX_EXPR)
            do_jump_by_parts_greater_rtx (mode, unsignedp, target, op1,
                                          NULL_RTX, op0);
          else
            do_jump_by_parts_greater_rtx (mode, unsignedp, op1, target,
                                          NULL_RTX, op0);
        }
      else
        {
          do_compare_rtx_and_jump (target, op1, code == MAX_EXPR ? GE : LE,
                                   unsignedp, mode, NULL_RTX, NULL_RTX, op0);
        }
      emit_move_insn (target, op1);
      emit_label (op0);
      return target;

    case BIT_NOT_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      temp = expand_unop (mode, one_cmpl_optab, op0, target, 1);
      if (temp == 0)
        abort ();
      return temp;

      /* ??? Can optimize bitwise operations with one arg constant.
         Can optimize (a bitwise1 n) bitwise2 (a bitwise3 b)
         and (a bitwise1 b) bitwise2 b (etc)
         but that is probably not worth while.  */

      /* BIT_AND_EXPR is for bitwise anding.  TRUTH_AND_EXPR is for anding two
         boolean values when we want in all cases to compute both of them.  In
         general it is fastest to do TRUTH_AND_EXPR by computing both operands
         as actual zero-or-1 values and then bitwise anding.  In cases where
         there cannot be any side effects, better code would be made by
         treating TRUTH_AND_EXPR like TRUTH_ANDIF_EXPR; but the question is
         how to recognize those cases.  */

    case TRUTH_AND_EXPR:
    case BIT_AND_EXPR:
      this_optab = and_optab;
      goto binop;

    case TRUTH_OR_EXPR:
    case BIT_IOR_EXPR:
      this_optab = ior_optab;
      goto binop;

    case TRUTH_XOR_EXPR:
    case BIT_XOR_EXPR:
      this_optab = xor_optab;
      goto binop;

    case LSHIFT_EXPR:
    case RSHIFT_EXPR:
    case LROTATE_EXPR:
    case RROTATE_EXPR:
      if (! safe_from_p (subtarget, TREE_OPERAND (exp, 1), 1))
        subtarget = 0;
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
      return expand_shift (code, mode, op0, TREE_OPERAND (exp, 1), target,
                           unsignedp);

      /* Could determine the answer when only additive constants differ.  Also,
         the addition of one can be handled by changing the condition.  */
    case LT_EXPR:
    case LE_EXPR:
    case GT_EXPR:
    case GE_EXPR:
    case EQ_EXPR:
    case NE_EXPR:
    case UNORDERED_EXPR:
    case ORDERED_EXPR:
    case UNLT_EXPR:
    case UNLE_EXPR:
    case UNGT_EXPR:
    case UNGE_EXPR:
    case UNEQ_EXPR:
      temp = do_store_flag (exp,
                            modifier != EXPAND_STACK_PARM ? target : NULL_RTX,
                            tmode != VOIDmode ? tmode : mode, 0);
      if (temp != 0)
        return temp;

      /* For foo != 0, load foo, and if it is nonzero load 1 instead.  */
      if (code == NE_EXPR && integer_zerop (TREE_OPERAND (exp, 1))
          && original_target
          && GET_CODE (original_target) == REG
          && (GET_MODE (original_target)
              == TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0)))))
        {
          temp = expand_expr (TREE_OPERAND (exp, 0), original_target,
                              VOIDmode, 0);

          /* If temp is constant, we can just compute the result.  */
          if (GET_CODE (temp) == CONST_INT)
            {
              if (INTVAL (temp) != 0)
                emit_move_insn (target, const1_rtx);
              else
                emit_move_insn (target, const0_rtx);

              return target;
            }

          if (temp != original_target)
            {
              enum machine_mode mode1 = GET_MODE (temp);
              if (mode1 == VOIDmode)
                mode1 = tmode != VOIDmode ? tmode : mode;

              temp = copy_to_mode_reg (mode1, temp);
            }

          op1 = gen_label_rtx ();
          emit_cmp_and_jump_insns (temp, const0_rtx, EQ, NULL_RTX,
                                   GET_MODE (temp), unsignedp, op1);
          emit_move_insn (temp, const1_rtx);
          emit_label (op1);
          return temp;
        }

      /* If no set-flag instruction, must generate a conditional
         store into a temporary variable.  Drop through
         and handle this like && and ||.  */

    case TRUTH_ANDIF_EXPR:
    case TRUTH_ORIF_EXPR:
      if (! ignore
          && (target == 0
              || modifier == EXPAND_STACK_PARM
              || ! safe_from_p (target, exp, 1)
              /* Make sure we don't have a hard reg (such as function's return
                 value) live across basic blocks, if not optimizing.  */
              || (!optimize && GET_CODE (target) == REG
                  && REGNO (target) < FIRST_PSEUDO_REGISTER)))
        target = gen_reg_rtx (tmode != VOIDmode ? tmode : mode);

      if (target)
        emit_clr_insn (target);

      op1 = gen_label_rtx ();
      jumpifnot (exp, op1);

      if (target)
        emit_0_to_1_insn (target);

      emit_label (op1);
      return ignore ? const0_rtx : target;

    case TRUTH_NOT_EXPR:
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      op0 = expand_expr (TREE_OPERAND (exp, 0), target, VOIDmode, 0);
      /* The parser is careful to generate TRUTH_NOT_EXPR
         only with operands that are always zero or one.  */
      temp = expand_binop (mode, xor_optab, op0, const1_rtx,
                           target, 1, OPTAB_LIB_WIDEN);
      if (temp == 0)
        abort ();
      return temp;

    case COMPOUND_EXPR:
      expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, 0);
      emit_queue ();
      return expand_expr_real (TREE_OPERAND (exp, 1),
                               (ignore ? const0_rtx : target),
                               VOIDmode, modifier, alt_rtl);

    case COND_EXPR:
      /* If we would have a "singleton" (see below) were it not for a
         conversion in each arm, bring that conversion back out.  */
      if (TREE_CODE (TREE_OPERAND (exp, 1)) == NOP_EXPR
          && TREE_CODE (TREE_OPERAND (exp, 2)) == NOP_EXPR
          && (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 1), 0))
              == TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 2), 0))))
        {
          tree iftrue = TREE_OPERAND (TREE_OPERAND (exp, 1), 0);
          tree iffalse = TREE_OPERAND (TREE_OPERAND (exp, 2), 0);

          if ((TREE_CODE_CLASS (TREE_CODE (iftrue)) == '2'
               && operand_equal_p (iffalse, TREE_OPERAND (iftrue, 0), 0))
              || (TREE_CODE_CLASS (TREE_CODE (iffalse)) == '2'
                  && operand_equal_p (iftrue, TREE_OPERAND (iffalse, 0), 0))
              || (TREE_CODE_CLASS (TREE_CODE (iftrue)) == '1'
                  && operand_equal_p (iffalse, TREE_OPERAND (iftrue, 0), 0))
              || (TREE_CODE_CLASS (TREE_CODE (iffalse)) == '1'
                  && operand_equal_p (iftrue, TREE_OPERAND (iffalse, 0), 0)))
            return expand_expr (build1 (NOP_EXPR, type,
                                        build (COND_EXPR, TREE_TYPE (iftrue),
                                               TREE_OPERAND (exp, 0),
                                               iftrue, iffalse)),
                                target, tmode, modifier);
        }

      {
        /* Note that COND_EXPRs whose type is a structure or union
           are required to be constructed to contain assignments of
           a temporary variable, so that we can evaluate them here
           for side effect only.  If type is void, we must do likewise.  */

        /* If an arm of the branch requires a cleanup,
           only that cleanup is performed.  */

        tree singleton = 0;
        tree binary_op = 0, unary_op = 0;

        /* If this is (A ? 1 : 0) and A is a condition, just evaluate it and
           convert it to our mode, if necessary.  */
        if (integer_onep (TREE_OPERAND (exp, 1))
            && integer_zerop (TREE_OPERAND (exp, 2))
            && TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 0))) == '<')
          {
            if (ignore)
              {
                expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode,
                             modifier);
                return const0_rtx;
              }

            if (modifier == EXPAND_STACK_PARM)
              target = 0;
            op0 = expand_expr (TREE_OPERAND (exp, 0), target, mode, modifier);
            if (GET_MODE (op0) == mode)
              return op0;

            if (target == 0)
              target = gen_reg_rtx (mode);
            convert_move (target, op0, unsignedp);
            return target;
          }

        /* Check for X ? A + B : A.  If we have this, we can copy A to the
           output and conditionally add B.  Similarly for unary operations.
           Don't do this if X has side-effects because those side effects
           might affect A or B and the "?" operation is a sequence point in
           ANSI.  (operand_equal_p tests for side effects.)  */

        if (TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 1))) == '2'
            && operand_equal_p (TREE_OPERAND (exp, 2),
                                TREE_OPERAND (TREE_OPERAND (exp, 1), 0), 0))
          singleton = TREE_OPERAND (exp, 2), binary_op = TREE_OPERAND (exp, 1);
        else if (TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 2))) == '2'
                 && operand_equal_p (TREE_OPERAND (exp, 1),
                                     TREE_OPERAND (TREE_OPERAND (exp, 2), 0), 0))
          singleton = TREE_OPERAND (exp, 1), binary_op = TREE_OPERAND (exp, 2);
        else if (TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 1))) == '1'
                 && operand_equal_p (TREE_OPERAND (exp, 2),
                                     TREE_OPERAND (TREE_OPERAND (exp, 1), 0), 0))
          singleton = TREE_OPERAND (exp, 2), unary_op = TREE_OPERAND (exp, 1);
        else if (TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 2))) == '1'
                 && operand_equal_p (TREE_OPERAND (exp, 1),
                                     TREE_OPERAND (TREE_OPERAND (exp, 2), 0), 0))
          singleton = TREE_OPERAND (exp, 1), unary_op = TREE_OPERAND (exp, 2);

        /* If we are not to produce a result, we have no target.  Otherwise,
           if a target was specified use it; it will not be used as an
           intermediate target unless it is safe.  If no target, use a
           temporary.  */

        if (ignore)
          temp = 0;
        else if (modifier == EXPAND_STACK_PARM)
          temp = assign_temp (type, 0, 0, 1);
        else if (original_target
                 && (safe_from_p (original_target, TREE_OPERAND (exp, 0), 1)
                     || (singleton && GET_CODE (original_target) == REG
                         && REGNO (original_target) >= FIRST_PSEUDO_REGISTER
                         && original_target == var_rtx (singleton)))
                 && GET_MODE (original_target) == mode
#ifdef HAVE_conditional_move
                 && (! can_conditionally_move_p (mode)
                     || GET_CODE (original_target) == REG
                     || TREE_ADDRESSABLE (type))
#endif
                 && (GET_CODE (original_target) != MEM
                     || TREE_ADDRESSABLE (type)))
          temp = original_target;
        else if (TREE_ADDRESSABLE (type))
          abort ();
        else
          temp = assign_temp (type, 0, 0, 1);

        /* If we had X ? A + C : A, with C a constant power of 2, and we can
           do the test of X as a store-flag operation, do this as
           A + ((X != 0) << log C).  Similarly for other simple binary
           operators.  Only do for C == 1 if BRANCH_COST is low.  */
        if (temp && singleton && binary_op
            && (TREE_CODE (binary_op) == PLUS_EXPR
                || TREE_CODE (binary_op) == MINUS_EXPR
                || TREE_CODE (binary_op) == BIT_IOR_EXPR
                || TREE_CODE (binary_op) == BIT_XOR_EXPR)
            && (BRANCH_COST >= 3 ? integer_pow2p (TREE_OPERAND (binary_op, 1))
                : integer_onep (TREE_OPERAND (binary_op, 1)))
            && TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 0))) == '<')
          {
            rtx result;
            tree cond;
            optab boptab = (TREE_CODE (binary_op) == PLUS_EXPR
                            ? (TYPE_TRAP_SIGNED (TREE_TYPE (binary_op))
                               ? addv_optab : add_optab)
                            : TREE_CODE (binary_op) == MINUS_EXPR
                            ? (TYPE_TRAP_SIGNED (TREE_TYPE (binary_op))
                               ? subv_optab : sub_optab)
                            : TREE_CODE (binary_op) == BIT_IOR_EXPR ? ior_optab
                            : xor_optab);

            /* If we had X ? A : A + 1, do this as A + (X == 0).  */
            if (singleton == TREE_OPERAND (exp, 1))
              cond = invert_truthvalue (TREE_OPERAND (exp, 0));
            else
              cond = TREE_OPERAND (exp, 0);

            result = do_store_flag (cond, (safe_from_p (temp, singleton, 1)
                                           ? temp : NULL_RTX),
                                    mode, BRANCH_COST <= 1);

            if (result != 0 && ! integer_onep (TREE_OPERAND (binary_op, 1)))
              result = expand_shift (LSHIFT_EXPR, mode, result,
                                     build_int_2 (tree_log2
                                                  (TREE_OPERAND
                                                   (binary_op, 1)),
                                                  0),
                                     (safe_from_p (temp, singleton, 1)
                                      ? temp : NULL_RTX), 0);

            if (result)
              {
                op1 = expand_expr (singleton, NULL_RTX, VOIDmode, 0);
                return expand_binop (mode, boptab, op1, result, temp,
                                     unsignedp, OPTAB_LIB_WIDEN);
              }
          }

        do_pending_stack_adjust ();
        NO_DEFER_POP;
        op0 = gen_label_rtx ();

        if (singleton && ! TREE_SIDE_EFFECTS (TREE_OPERAND (exp, 0)))
          {
            if (temp != 0)
              {
                /* If the target conflicts with the other operand of the
                   binary op, we can't use it.  Also, we can't use the target
                   if it is a hard register, because evaluating the condition
                   might clobber it.  */
                if ((binary_op
                     && ! safe_from_p (temp, TREE_OPERAND (binary_op, 1), 1))
                    || (GET_CODE (temp) == REG
                        && REGNO (temp) < FIRST_PSEUDO_REGISTER))
                  temp = gen_reg_rtx (mode);
                store_expr (singleton, temp,
                            modifier == EXPAND_STACK_PARM ? 2 : 0);
              }
            else
              expand_expr (singleton,
                           ignore ? const0_rtx : NULL_RTX, VOIDmode, 0);
            if (singleton == TREE_OPERAND (exp, 1))
              jumpif (TREE_OPERAND (exp, 0), op0);
            else
              jumpifnot (TREE_OPERAND (exp, 0), op0);

            start_cleanup_deferral ();
            if (binary_op && temp == 0)
              /* Just touch the other operand.  */
              expand_expr (TREE_OPERAND (binary_op, 1),
                           ignore ? const0_rtx : NULL_RTX, VOIDmode, 0);
            else if (binary_op)
              store_expr (build (TREE_CODE (binary_op), type,
                                 make_tree (type, temp),
                                 TREE_OPERAND (binary_op, 1)),
                          temp, modifier == EXPAND_STACK_PARM ? 2 : 0);
            else
              store_expr (build1 (TREE_CODE (unary_op), type,
                                  make_tree (type, temp)),
                          temp, modifier == EXPAND_STACK_PARM ? 2 : 0);
            op1 = op0;
          }
        /* Check for A op 0 ? A : FOO and A op 0 ? FOO : A where OP is any
           comparison operator.  If we have one of these cases, set the
           output to A, branch on A (cse will merge these two references),
           then set the output to FOO.  */
        else if (temp
                 && TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 0))) == '<'
                 && integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 0), 1))
                 && operand_equal_p (TREE_OPERAND (TREE_OPERAND (exp, 0), 0),
                                     TREE_OPERAND (exp, 1), 0)
                 && (! TREE_SIDE_EFFECTS (TREE_OPERAND (exp, 0))
                     || TREE_CODE (TREE_OPERAND (exp, 1)) == SAVE_EXPR)
                 && safe_from_p (temp, TREE_OPERAND (exp, 2), 1))
          {
            if (GET_CODE (temp) == REG
                && REGNO (temp) < FIRST_PSEUDO_REGISTER)
              temp = gen_reg_rtx (mode);
            store_expr (TREE_OPERAND (exp, 1), temp,
                        modifier == EXPAND_STACK_PARM ? 2 : 0);
            jumpif (TREE_OPERAND (exp, 0), op0);

            start_cleanup_deferral ();
            if (TREE_TYPE (TREE_OPERAND (exp, 2)) != void_type_node)
              store_expr (TREE_OPERAND (exp, 2), temp,
                          modifier == EXPAND_STACK_PARM ? 2 : 0);
            else
              expand_expr (TREE_OPERAND (exp, 2),
                           ignore ? const0_rtx : NULL_RTX, VOIDmode, 0);
            op1 = op0;
          }
        else if (temp
                 && TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 0))) == '<'
                 && integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 0), 1))
                 && operand_equal_p (TREE_OPERAND (TREE_OPERAND (exp, 0), 0),
                                     TREE_OPERAND (exp, 2), 0)
                 && (! TREE_SIDE_EFFECTS (TREE_OPERAND (exp, 0))
                     || TREE_CODE (TREE_OPERAND (exp, 2)) == SAVE_EXPR)
                 && safe_from_p (temp, TREE_OPERAND (exp, 1), 1))
          {
            if (GET_CODE (temp) == REG
                && REGNO (temp) < FIRST_PSEUDO_REGISTER)
              temp = gen_reg_rtx (mode);
            store_expr (TREE_OPERAND (exp, 2), temp,
                        modifier == EXPAND_STACK_PARM ? 2 : 0);
            jumpifnot (TREE_OPERAND (exp, 0), op0);

            start_cleanup_deferral ();
            if (TREE_TYPE (TREE_OPERAND (exp, 1)) != void_type_node)
              store_expr (TREE_OPERAND (exp, 1), temp,
                          modifier == EXPAND_STACK_PARM ? 2 : 0);
            else
              expand_expr (TREE_OPERAND (exp, 1),
                           ignore ? const0_rtx : NULL_RTX, VOIDmode, 0);
            op1 = op0;
          }
        else
          {
            op1 = gen_label_rtx ();
            jumpifnot (TREE_OPERAND (exp, 0), op0);

            start_cleanup_deferral ();

            /* One branch of the cond can be void, if it never returns. For
               example A ? throw : E  */
            if (temp != 0
                && TREE_TYPE (TREE_OPERAND (exp, 1)) != void_type_node)
              store_expr (TREE_OPERAND (exp, 1), temp,
                          modifier == EXPAND_STACK_PARM ? 2 : 0);
            else
              expand_expr (TREE_OPERAND (exp, 1),
                           ignore ? const0_rtx : NULL_RTX, VOIDmode, 0);
            end_cleanup_deferral ();
            emit_queue ();
            emit_jump_insn (gen_jump (op1));
            emit_barrier ();
            emit_label (op0);
            start_cleanup_deferral ();
            if (temp != 0
                && TREE_TYPE (TREE_OPERAND (exp, 2)) != void_type_node)
              store_expr (TREE_OPERAND (exp, 2), temp,
                          modifier == EXPAND_STACK_PARM ? 2 : 0);
            else
              expand_expr (TREE_OPERAND (exp, 2),
                           ignore ? const0_rtx : NULL_RTX, VOIDmode, 0);
          }

        end_cleanup_deferral ();

        emit_queue ();
        emit_label (op1);
        OK_DEFER_POP;

        return temp;
      }

    case TARGET_EXPR:
      {
        /* Something needs to be initialized, but we didn't know
           where that thing was when building the tree.  For example,
           it could be the return value of a function, or a parameter
           to a function which lays down in the stack, or a temporary
           variable which must be passed by reference.

           We guarantee that the expression will either be constructed
           or copied into our original target.  */

        tree slot = TREE_OPERAND (exp, 0);
        tree cleanups = NULL_TREE;
        tree exp1;

        if (TREE_CODE (slot) != VAR_DECL)
          abort ();

        if (! ignore)
          target = original_target;

        /* Set this here so that if we get a target that refers to a
           register variable that's already been used, put_reg_into_stack
           knows that it should fix up those uses.  */
        TREE_USED (slot) = 1;

        if (target == 0)
          {
            if (DECL_RTL_SET_P (slot))
              {
                target = DECL_RTL (slot);
                /* If we have already expanded the slot, so don't do
                   it again.  (mrs)  */
                if (TREE_OPERAND (exp, 1) == NULL_TREE)
                  return target;
              }
            else
              {
                target = assign_temp (type, 2, 0, 1);
                /* All temp slots at this level must not conflict.  */
                preserve_temp_slots (target);
                SET_DECL_RTL (slot, target);
                if (TREE_ADDRESSABLE (slot))
                  put_var_into_stack (slot, /*rescan=*/false);

                /* Since SLOT is not known to the called function
                   to belong to its stack frame, we must build an explicit
                   cleanup.  This case occurs when we must build up a reference
                   to pass the reference as an argument.  In this case,
                   it is very likely that such a reference need not be
                   built here.  */

                if (TREE_OPERAND (exp, 2) == 0)
                  TREE_OPERAND (exp, 2)
                    = (*lang_hooks.maybe_build_cleanup) (slot);
                cleanups = TREE_OPERAND (exp, 2);
              }
          }
        else
          {
            /* This case does occur, when expanding a parameter which
               needs to be constructed on the stack.  The target
               is the actual stack address that we want to initialize.
               The function we call will perform the cleanup in this case.  */

            /* If we have already assigned it space, use that space,
               not target that we were passed in, as our target
               parameter is only a hint.  */
            if (DECL_RTL_SET_P (slot))
              {
                target = DECL_RTL (slot);
                /* If we have already expanded the slot, so don't do
                   it again.  (mrs)  */
                if (TREE_OPERAND (exp, 1) == NULL_TREE)
                  return target;
              }
            else
              {
                SET_DECL_RTL (slot, target);
                /* If we must have an addressable slot, then make sure that
                   the RTL that we just stored in slot is OK.  */
                if (TREE_ADDRESSABLE (slot))
                  put_var_into_stack (slot, /*rescan=*/true);
              }
          }

        exp1 = TREE_OPERAND (exp, 3) = TREE_OPERAND (exp, 1);
        /* Mark it as expanded.  */
        TREE_OPERAND (exp, 1) = NULL_TREE;

        store_expr (exp1, target, modifier == EXPAND_STACK_PARM ? 2 : 0);

        expand_decl_cleanup_eh (NULL_TREE, cleanups, CLEANUP_EH_ONLY (exp));

        return target;
      }

    case INIT_EXPR:
      {
        tree lhs = TREE_OPERAND (exp, 0);
        tree rhs = TREE_OPERAND (exp, 1);

        temp = expand_assignment (lhs, rhs, ! ignore);
        return temp;
      }

    case MODIFY_EXPR:
      {
        /* If lhs is complex, expand calls in rhs before computing it.
           That's so we don't compute a pointer and save it over a
           call.  If lhs is simple, compute it first so we can give it
           as a target if the rhs is just a call.  This avoids an
           extra temp and copy and that prevents a partial-subsumption
           which makes bad code.  Actually we could treat
           component_ref's of vars like vars.  */

        tree lhs = TREE_OPERAND (exp, 0);
        tree rhs = TREE_OPERAND (exp, 1);

        temp = 0;

        /* Check for |= or &= of a bitfield of size one into another bitfield
           of size 1.  In this case, (unless we need the result of the
           assignment) we can do this more efficiently with a
           test followed by an assignment, if necessary.

           ??? At this point, we can't get a BIT_FIELD_REF here.  But if
           things change so we do, this code should be enhanced to
           support it.  */
        if (ignore
            && TREE_CODE (lhs) == COMPONENT_REF
            && (TREE_CODE (rhs) == BIT_IOR_EXPR
                || TREE_CODE (rhs) == BIT_AND_EXPR)
            && TREE_OPERAND (rhs, 0) == lhs
            && TREE_CODE (TREE_OPERAND (rhs, 1)) == COMPONENT_REF
            && integer_onep (DECL_SIZE (TREE_OPERAND (lhs, 1)))
            && integer_onep (DECL_SIZE (TREE_OPERAND (TREE_OPERAND (rhs, 1), 1))))
          {
            rtx label = gen_label_rtx ();

            do_jump (TREE_OPERAND (rhs, 1),
                     TREE_CODE (rhs) == BIT_IOR_EXPR ? label : 0,
                     TREE_CODE (rhs) == BIT_AND_EXPR ? label : 0);
            expand_assignment (lhs, convert (TREE_TYPE (rhs),
                                             (TREE_CODE (rhs) == BIT_IOR_EXPR
                                              ? integer_one_node
                                              : integer_zero_node)),
                               0);
            do_pending_stack_adjust ();
            emit_label (label);
            return const0_rtx;
          }

        temp = expand_assignment (lhs, rhs, ! ignore);

        return temp;
      }

    case RETURN_EXPR:
      if (!TREE_OPERAND (exp, 0))
        expand_null_return ();
      else
        expand_return (TREE_OPERAND (exp, 0));
      return const0_rtx;

    case PREINCREMENT_EXPR:
    case PREDECREMENT_EXPR:
      return expand_increment (exp, 0, ignore);

    case POSTINCREMENT_EXPR:
    case POSTDECREMENT_EXPR:
      /* Faster to treat as pre-increment if result is not used.  */
      return expand_increment (exp, ! ignore, ignore);

    case ADDR_EXPR:
      if (modifier == EXPAND_STACK_PARM)
        target = 0;
      /* Are we taking the address of a nested function?  */
      if (TREE_CODE (TREE_OPERAND (exp, 0)) == FUNCTION_DECL
          && decl_function_context (TREE_OPERAND (exp, 0)) != 0
          && ! DECL_NO_STATIC_CHAIN (TREE_OPERAND (exp, 0))
          && ! TREE_STATIC (exp))
        {
          op0 = trampoline_address (TREE_OPERAND (exp, 0));
          op0 = force_operand (op0, target);
        }
      /* If we are taking the address of something erroneous, just
         return a zero.  */
      else if (TREE_CODE (TREE_OPERAND (exp, 0)) == ERROR_MARK)
        return const0_rtx;
      /* If we are taking the address of a constant and are at the
         top level, we have to use output_constant_def since we can't
         call force_const_mem at top level.  */
      else if (cfun == 0
               && (TREE_CODE (TREE_OPERAND (exp, 0)) == CONSTRUCTOR
                   || (TREE_CODE_CLASS (TREE_CODE (TREE_OPERAND (exp, 0)))
                       == 'c')))
        op0 = XEXP (output_constant_def (TREE_OPERAND (exp, 0), 0), 0);
      else
        {
          /* We make sure to pass const0_rtx down if we came in with
             ignore set, to avoid doing the cleanups twice for something.  */
          op0 = expand_expr (TREE_OPERAND (exp, 0),
                             ignore ? const0_rtx : NULL_RTX, VOIDmode,
                             (modifier == EXPAND_INITIALIZER
                              ? modifier : EXPAND_CONST_ADDRESS));

          /* If we are going to ignore the result, OP0 will have been set
             to const0_rtx, so just return it.  Don't get confused and
             think we are taking the address of the constant.  */
          if (ignore)
            return op0;

          /* Pass 1 for MODIFY, so that protect_from_queue doesn't get
             clever and returns a REG when given a MEM.  */
          op0 = protect_from_queue (op0, 1);

          /* We would like the object in memory.  If it is a constant, we can
             have it be statically allocated into memory.  For a non-constant,
             we need to allocate some memory and store the value into it.  */

          if (CONSTANT_P (op0))
            op0 = force_const_mem (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))),
                                   op0);
          else if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG
                   || GET_CODE (op0) == CONCAT || GET_CODE (op0) == ADDRESSOF
                   || GET_CODE (op0) == PARALLEL || GET_CODE (op0) == LO_SUM)
            {
              /* If the operand is a SAVE_EXPR, we can deal with this by
                 forcing the SAVE_EXPR into memory.  */
              if (TREE_CODE (TREE_OPERAND (exp, 0)) == SAVE_EXPR)
                {
                  put_var_into_stack (TREE_OPERAND (exp, 0),
                                      /*rescan=*/true);
                  op0 = SAVE_EXPR_RTL (TREE_OPERAND (exp, 0));
                }
              else
                {
                  /* If this object is in a register, it can't be BLKmode.  */
                  tree inner_type = TREE_TYPE (TREE_OPERAND (exp, 0));
                  rtx memloc = assign_temp (inner_type, 1, 1, 1);

                  if (GET_CODE (op0) == PARALLEL)
                    /* Handle calls that pass values in multiple
                       non-contiguous locations.  The Irix 6 ABI has examples
                       of this.  */
                    emit_group_store (memloc, op0, inner_type,
                                      int_size_in_bytes (inner_type));
                  else
                    emit_move_insn (memloc, op0);

                  op0 = memloc;
                }
            }

          if (GET_CODE (op0) != MEM)
            abort ();

          mark_temp_addr_taken (op0);
          if (modifier == EXPAND_SUM || modifier == EXPAND_INITIALIZER)
            {
              op0 = XEXP (op0, 0);
              if (GET_MODE (op0) == Pmode && mode == ptr_mode)
                op0 = convert_memory_address (ptr_mode, op0);
              return op0;
            }

          /* If OP0 is not aligned as least as much as the type requires, we
             need to make a temporary, copy OP0 to it, and take the address of
             the temporary.  We want to use the alignment of the type, not of
             the operand.  Note that this is incorrect for FUNCTION_TYPE, but
             the test for BLKmode means that can't happen.  The test for
             BLKmode is because we never make mis-aligned MEMs with
             non-BLKmode.

             We don't need to do this at all if the machine doesn't have
             strict alignment.  */
          if (STRICT_ALIGNMENT && GET_MODE (op0) == BLKmode
              && (TYPE_ALIGN (TREE_TYPE (TREE_OPERAND (exp, 0)))
                  > MEM_ALIGN (op0))
              && MEM_ALIGN (op0) < BIGGEST_ALIGNMENT)
            {
              tree inner_type = TREE_TYPE (TREE_OPERAND (exp, 0));
              rtx new;

              if (TYPE_ALIGN_OK (inner_type))
                abort ();

              if (TREE_ADDRESSABLE (inner_type))
                {
                  /* We can't make a bitwise copy of this object, so fail.  */
                  error ("cannot take the address of an unaligned member");
                  return const0_rtx;
                }

              new = assign_stack_temp_for_type
                (TYPE_MODE (inner_type),
                 MEM_SIZE (op0) ? INTVAL (MEM_SIZE (op0))
                 : int_size_in_bytes (inner_type),
                 1, build_qualified_type (inner_type,
                                          (TYPE_QUALS (inner_type)
                                           | TYPE_QUAL_CONST)));

              emit_block_move (new, op0, expr_size (TREE_OPERAND (exp, 0)),
                               (modifier == EXPAND_STACK_PARM
                                ? BLOCK_OP_CALL_PARM : BLOCK_OP_NORMAL));

              op0 = new;
            }

          op0 = force_operand (XEXP (op0, 0), target);
        }

      if (flag_force_addr
          && GET_CODE (op0) != REG
          && modifier != EXPAND_CONST_ADDRESS
          && modifier != EXPAND_INITIALIZER
          && modifier != EXPAND_SUM)
        op0 = force_reg (Pmode, op0);

      if (GET_CODE (op0) == REG
          && ! REG_USERVAR_P (op0))
        mark_reg_pointer (op0, TYPE_ALIGN (TREE_TYPE (type)));

      if (GET_MODE (op0) == Pmode && mode == ptr_mode)
        op0 = convert_memory_address (ptr_mode, op0);

      return op0;

    case ENTRY_VALUE_EXPR:
      abort ();

    /* COMPLEX type for Extended Pascal & Fortran  */
    case COMPLEX_EXPR:
      {
        enum machine_mode mode = TYPE_MODE (TREE_TYPE (TREE_TYPE (exp)));
        rtx insns;

        /* Get the rtx code of the operands.  */
        op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
        op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);

        if (! target)
          target = gen_reg_rtx (TYPE_MODE (TREE_TYPE (exp)));

        start_sequence ();

        /* Move the real (op0) and imaginary (op1) parts to their location.  */
        emit_move_insn (gen_realpart (mode, target), op0);
        emit_move_insn (gen_imagpart (mode, target), op1);

        insns = get_insns ();
        end_sequence ();

        /* Complex construction should appear as a single unit.  */
        /* If TARGET is a CONCAT, we got insns like RD = RS, ID = IS,
           each with a separate pseudo as destination.
           It's not correct for flow to treat them as a unit.  */
        if (GET_CODE (target) != CONCAT)
          emit_no_conflict_block (insns, target, op0, op1, NULL_RTX);
        else
          emit_insn (insns);

        return target;
      }

    case REALPART_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
      return gen_realpart (mode, op0);

    case IMAGPART_EXPR:
      op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
      return gen_imagpart (mode, op0);

    case CONJ_EXPR:
      {
        enum machine_mode partmode = TYPE_MODE (TREE_TYPE (TREE_TYPE (exp)));
        rtx imag_t;
        rtx insns;

        op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);

        if (! target)
          target = gen_reg_rtx (mode);

        start_sequence ();

        /* Store the realpart and the negated imagpart to target.  */
        emit_move_insn (gen_realpart (partmode, target),
                        gen_realpart (partmode, op0));

        imag_t = gen_imagpart (partmode, target);
        temp = expand_unop (partmode,
                            ! unsignedp && flag_trapv
                            && (GET_MODE_CLASS(partmode) == MODE_INT)
                            ? negv_optab : neg_optab,
                            gen_imagpart (partmode, op0), imag_t, 0);
        if (temp != imag_t)
          emit_move_insn (imag_t, temp);

        insns = get_insns ();
        end_sequence ();

        /* Conjugate should appear as a single unit
           If TARGET is a CONCAT, we got insns like RD = RS, ID = - IS,
           each with a separate pseudo as destination.
           It's not correct for flow to treat them as a unit.  */
        if (GET_CODE (target) != CONCAT)
          emit_no_conflict_block (insns, target, op0, NULL_RTX, NULL_RTX);
        else
          emit_insn (insns);

        return target;
      }

    case TRY_CATCH_EXPR:
      {
        tree handler = TREE_OPERAND (exp, 1);

        expand_eh_region_start ();

        op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);

        expand_eh_region_end_cleanup (handler);

        return op0;
      }

    case TRY_FINALLY_EXPR:
      {
        tree try_block = TREE_OPERAND (exp, 0);
        tree finally_block = TREE_OPERAND (exp, 1);

        if (!optimize || unsafe_for_reeval (finally_block) > 1)
          {
            /* In this case, wrapping FINALLY_BLOCK in an UNSAVE_EXPR
               is not sufficient, so we cannot expand the block twice.
               So we play games with GOTO_SUBROUTINE_EXPR to let us
               expand the thing only once.  */
            /* When not optimizing, we go ahead with this form since
               (1) user breakpoints operate more predictably without
                   code duplication, and
               (2) we're not running any of the global optimizers
                   that would explode in time/space with the highly
                   connected CFG created by the indirect branching.  */

            rtx finally_label = gen_label_rtx ();
            rtx done_label = gen_label_rtx ();
            rtx return_link = gen_reg_rtx (Pmode);
            tree cleanup = build (GOTO_SUBROUTINE_EXPR, void_type_node,
                                  (tree) finally_label, (tree) return_link);
            TREE_SIDE_EFFECTS (cleanup) = 1;

            /* Start a new binding layer that will keep track of all cleanup
               actions to be performed.  */
            expand_start_bindings (2);
            target_temp_slot_level = temp_slot_level;

            expand_decl_cleanup (NULL_TREE, cleanup);
            op0 = expand_expr (try_block, target, tmode, modifier);

            preserve_temp_slots (op0);
            expand_end_bindings (NULL_TREE, 0, 0);
            emit_jump (done_label);
            emit_label (finally_label);
            expand_expr (finally_block, const0_rtx, VOIDmode, 0);
            emit_indirect_jump (return_link);
            emit_label (done_label);
          }
        else
          {
            expand_start_bindings (2);
            target_temp_slot_level = temp_slot_level;

            expand_decl_cleanup (NULL_TREE, finally_block);
            op0 = expand_expr (try_block, target, tmode, modifier);

            preserve_temp_slots (op0);
            expand_end_bindings (NULL_TREE, 0, 0);
          }

        return op0;
      }

    case GOTO_SUBROUTINE_EXPR:
      {
        rtx subr = (rtx) TREE_OPERAND (exp, 0);
        rtx return_link = *(rtx *) &TREE_OPERAND (exp, 1);
        rtx return_address = gen_label_rtx ();
        emit_move_insn (return_link,
                        gen_rtx_LABEL_REF (Pmode, return_address));
        emit_jump (subr);
        emit_label (return_address);
        return const0_rtx;
      }

    case VA_ARG_EXPR:
      return expand_builtin_va_arg (TREE_OPERAND (exp, 0), type);

    case EXC_PTR_EXPR:
      return get_exception_pointer (cfun);

    case FDESC_EXPR:
      /* Function descriptors are not valid except for as
         initialization constants, and should not be expanded.  */
      abort ();

    default:
      return (*lang_hooks.expand_expr) (exp, original_target, tmode, modifier,
                                        alt_rtl);
    }

  /* Here to do an ordinary binary operator, generating an instruction
     from the optab already placed in `this_optab'.  */
 binop:
  expand_operands (TREE_OPERAND (exp, 0), TREE_OPERAND (exp, 1),
                   subtarget, &op0, &op1, 0);
 binop2:
  if (modifier == EXPAND_STACK_PARM)
    target = 0;
  temp = expand_binop (mode, this_optab, op0, op1, target,
                       unsignedp, OPTAB_LIB_WIDEN);
  if (temp == 0)
    abort ();
  return temp;
}
\f
/* Subroutine of above: returns 1 if OFFSET corresponds to an offset that
   when applied to the address of EXP produces an address known to be
   aligned more than BIGGEST_ALIGNMENT.  */

static int
is_aligning_offset (tree offset, tree exp)
{
  /* Strip off any conversions and WITH_RECORD_EXPR nodes.  */
  while (TREE_CODE (offset) == NON_LVALUE_EXPR
         || TREE_CODE (offset) == NOP_EXPR
         || TREE_CODE (offset) == CONVERT_EXPR
         || TREE_CODE (offset) == WITH_RECORD_EXPR)
    offset = TREE_OPERAND (offset, 0);

  /* We must now have a BIT_AND_EXPR with a constant that is one less than
     power of 2 and which is larger than BIGGEST_ALIGNMENT.  */
  if (TREE_CODE (offset) != BIT_AND_EXPR
      || !host_integerp (TREE_OPERAND (offset, 1), 1)
      || compare_tree_int (TREE_OPERAND (offset, 1), 
                           BIGGEST_ALIGNMENT / BITS_PER_UNIT) <= 0
      || !exact_log2 (tree_low_cst (TREE_OPERAND (offset, 1), 1) + 1) < 0)
    return 0;

  /* Look at the first operand of BIT_AND_EXPR and strip any conversion.
     It must be NEGATE_EXPR.  Then strip any more conversions.  */
  offset = TREE_OPERAND (offset, 0);
  while (TREE_CODE (offset) == NON_LVALUE_EXPR
         || TREE_CODE (offset) == NOP_EXPR
         || TREE_CODE (offset) == CONVERT_EXPR)
    offset = TREE_OPERAND (offset, 0);

  if (TREE_CODE (offset) != NEGATE_EXPR)
    return 0;

  offset = TREE_OPERAND (offset, 0);
  while (TREE_CODE (offset) == NON_LVALUE_EXPR
         || TREE_CODE (offset) == NOP_EXPR
         || TREE_CODE (offset) == CONVERT_EXPR)
    offset = TREE_OPERAND (offset, 0);

  /* This must now be the address either of EXP or of a PLACEHOLDER_EXPR
     whose type is the same as EXP.  */
  return (TREE_CODE (offset) == ADDR_EXPR
          && (TREE_OPERAND (offset, 0) == exp
              || (TREE_CODE (TREE_OPERAND (offset, 0)) == PLACEHOLDER_EXPR
                  && (TREE_TYPE (TREE_OPERAND (offset, 0))
                      == TREE_TYPE (exp)))));
}
\f
/* Return the tree node if an ARG corresponds to a string constant or zero
   if it doesn't.  If we return nonzero, set *PTR_OFFSET to the offset
   in bytes within the string that ARG is accessing.  The type of the
   offset will be `sizetype'.  */

tree
string_constant (tree arg, tree *ptr_offset)
{
  STRIP_NOPS (arg);

  if (TREE_CODE (arg) == ADDR_EXPR
      && TREE_CODE (TREE_OPERAND (arg, 0)) == STRING_CST)
    {
      *ptr_offset = size_zero_node;
      return TREE_OPERAND (arg, 0);
    }
  else if (TREE_CODE (arg) == PLUS_EXPR)
    {
      tree arg0 = TREE_OPERAND (arg, 0);
      tree arg1 = TREE_OPERAND (arg, 1);

      STRIP_NOPS (arg0);
      STRIP_NOPS (arg1);

      if (TREE_CODE (arg0) == ADDR_EXPR
          && TREE_CODE (TREE_OPERAND (arg0, 0)) == STRING_CST)
        {
          *ptr_offset = convert (sizetype, arg1);
          return TREE_OPERAND (arg0, 0);
        }
      else if (TREE_CODE (arg1) == ADDR_EXPR
               && TREE_CODE (TREE_OPERAND (arg1, 0)) == STRING_CST)
        {
          *ptr_offset = convert (sizetype, arg0);
          return TREE_OPERAND (arg1, 0);
        }
    }

  return 0;
}
\f
/* Expand code for a post- or pre- increment or decrement
   and return the RTX for the result.
   POST is 1 for postinc/decrements and 0 for preinc/decrements.  */

static rtx
expand_increment (tree exp, int post, int ignore)
{
  rtx op0, op1;
  rtx temp, value;
  tree incremented = TREE_OPERAND (exp, 0);
  optab this_optab = add_optab;
  int icode;
  enum machine_mode mode = TYPE_MODE (TREE_TYPE (exp));
  int op0_is_copy = 0;
  int single_insn = 0;
  /* 1 means we can't store into OP0 directly,
     because it is a subreg narrower than a word,
     and we don't dare clobber the rest of the word.  */
  int bad_subreg = 0;

  /* Stabilize any component ref that might need to be
     evaluated more than once below.  */
  if (!post
      || TREE_CODE (incremented) == BIT_FIELD_REF
      || (TREE_CODE (incremented) == COMPONENT_REF
          && (TREE_CODE (TREE_OPERAND (incremented, 0)) != INDIRECT_REF
              || DECL_BIT_FIELD (TREE_OPERAND (incremented, 1)))))
    incremented = stabilize_reference (incremented);
  /* Nested *INCREMENT_EXPRs can happen in C++.  We must force innermost
     ones into save exprs so that they don't accidentally get evaluated
     more than once by the code below.  */
  if (TREE_CODE (incremented) == PREINCREMENT_EXPR
      || TREE_CODE (incremented) == PREDECREMENT_EXPR)
    incremented = save_expr (incremented);

  /* Compute the operands as RTX.
     Note whether OP0 is the actual lvalue or a copy of it:
     I believe it is a copy iff it is a register or subreg
     and insns were generated in computing it.  */

  temp = get_last_insn ();
  op0 = expand_expr (incremented, NULL_RTX, VOIDmode, 0);

  /* If OP0 is a SUBREG made for a promoted variable, we cannot increment
     in place but instead must do sign- or zero-extension during assignment,
     so we copy it into a new register and let the code below use it as
     a copy.

     Note that we can safely modify this SUBREG since it is know not to be
     shared (it was made by the expand_expr call above).  */

  if (GET_CODE (op0) == SUBREG && SUBREG_PROMOTED_VAR_P (op0))
    {
      if (post)
        SUBREG_REG (op0) = copy_to_reg (SUBREG_REG (op0));
      else
        bad_subreg = 1;
    }
  else if (GET_CODE (op0) == SUBREG
           && GET_MODE_BITSIZE (GET_MODE (op0)) < BITS_PER_WORD)
    {
      /* We cannot increment this SUBREG in place.  If we are
         post-incrementing, get a copy of the old value.  Otherwise,
         just mark that we cannot increment in place.  */
      if (post)
        op0 = copy_to_reg (op0);
      else
        bad_subreg = 1;
    }

  op0_is_copy = ((GET_CODE (op0) == SUBREG || GET_CODE (op0) == REG)
                 && temp != get_last_insn ());
  op1 = expand_expr (TREE_OPERAND (exp, 1), NULL_RTX, VOIDmode, 0);

  /* Decide whether incrementing or decrementing.  */
  if (TREE_CODE (exp) == POSTDECREMENT_EXPR
      || TREE_CODE (exp) == PREDECREMENT_EXPR)
    this_optab = sub_optab;

  /* Convert decrement by a constant into a negative increment.  */
  if (this_optab == sub_optab
      && GET_CODE (op1) == CONST_INT)
    {
      op1 = GEN_INT (-INTVAL (op1));
      this_optab = add_optab;
    }

  if (TYPE_TRAP_SIGNED (TREE_TYPE (exp)))
    this_optab = this_optab == add_optab ? addv_optab : subv_optab;

  /* For a preincrement, see if we can do this with a single instruction.  */
  if (!post)
    {
      icode = (int) this_optab->handlers[(int) mode].insn_code;
      if (icode != (int) CODE_FOR_nothing
          /* Make sure that OP0 is valid for operands 0 and 1
             of the insn we want to queue.  */
          && (*insn_data[icode].operand[0].predicate) (op0, mode)
          && (*insn_data[icode].operand[1].predicate) (op0, mode)
          && (*insn_data[icode].operand[2].predicate) (op1, mode))
        single_insn = 1;
    }

  /* If OP0 is not the actual lvalue, but rather a copy in a register,
     then we cannot just increment OP0.  We must therefore contrive to
     increment the original value.  Then, for postincrement, we can return
     OP0 since it is a copy of the old value.  For preincrement, expand here
     unless we can do it with a single insn.

     Likewise if storing directly into OP0 would clobber high bits
     we need to preserve (bad_subreg).  */
  if (op0_is_copy || (!post && !single_insn) || bad_subreg)
    {
      /* This is the easiest way to increment the value wherever it is.
         Problems with multiple evaluation of INCREMENTED are prevented
         because either (1) it is a component_ref or preincrement,
         in which case it was stabilized above, or (2) it is an array_ref
         with constant index in an array in a register, which is
         safe to reevaluate.  */
      tree newexp = build (((TREE_CODE (exp) == POSTDECREMENT_EXPR
                             || TREE_CODE (exp) == PREDECREMENT_EXPR)
                            ? MINUS_EXPR : PLUS_EXPR),
                           TREE_TYPE (exp),
                           incremented,
                           TREE_OPERAND (exp, 1));

      while (TREE_CODE (incremented) == NOP_EXPR
             || TREE_CODE (incremented) == CONVERT_EXPR)
        {
          newexp = convert (TREE_TYPE (incremented), newexp);
          incremented = TREE_OPERAND (incremented, 0);
        }

      temp = expand_assignment (incremented, newexp, ! post && ! ignore);
      return post ? op0 : temp;
    }

  if (post)
    {
      /* We have a true reference to the value in OP0.
         If there is an insn to add or subtract in this mode, queue it.
         Queuing the increment insn avoids the register shuffling
         that often results if we must increment now and first save
         the old value for subsequent use.  */

#if 0  /* Turned off to avoid making extra insn for indexed memref.  */
      op0 = stabilize (op0);
#endif

      icode = (int) this_optab->handlers[(int) mode].insn_code;
      if (icode != (int) CODE_FOR_nothing
          /* Make sure that OP0 is valid for operands 0 and 1
             of the insn we want to queue.  */
          && (*insn_data[icode].operand[0].predicate) (op0, mode)
          && (*insn_data[icode].operand[1].predicate) (op0, mode))
        {
          if (! (*insn_data[icode].operand[2].predicate) (op1, mode))
            op1 = force_reg (mode, op1);

          return enqueue_insn (op0, GEN_FCN (icode) (op0, op0, op1));
        }
      if (icode != (int) CODE_FOR_nothing && GET_CODE (op0) == MEM)
        {
          rtx addr = (general_operand (XEXP (op0, 0), mode)
                      ? force_reg (Pmode, XEXP (op0, 0))
                      : copy_to_reg (XEXP (op0, 0)));
          rtx temp, result;

          op0 = replace_equiv_address (op0, addr);
          temp = force_reg (GET_MODE (op0), op0);
          if (! (*insn_data[icode].operand[2].predicate) (op1, mode))
            op1 = force_reg (mode, op1);

          /* The increment queue is LIFO, thus we have to `queue'
             the instructions in reverse order.  */
          enqueue_insn (op0, gen_move_insn (op0, temp));
          result = enqueue_insn (temp, GEN_FCN (icode) (temp, temp, op1));
          return result;
        }
    }

  /* Preincrement, or we can't increment with one simple insn.  */
  if (post)
    /* Save a copy of the value before inc or dec, to return it later.  */
    temp = value = copy_to_reg (op0);
  else
    /* Arrange to return the incremented value.  */
    /* Copy the rtx because expand_binop will protect from the queue,
       and the results of that would be invalid for us to return
       if our caller does emit_queue before using our result.  */
    temp = copy_rtx (value = op0);

  /* Increment however we can.  */
  op1 = expand_binop (mode, this_optab, value, op1, op0,
                      TREE_UNSIGNED (TREE_TYPE (exp)), OPTAB_LIB_WIDEN);

  /* Make sure the value is stored into OP0.  */
  if (op1 != op0)
    emit_move_insn (op0, op1);

  return temp;
}
\f
/* Generate code to calculate EXP using a store-flag instruction
   and return an rtx for the result.  EXP is either a comparison
   or a TRUTH_NOT_EXPR whose operand is a comparison.

   If TARGET is nonzero, store the result there if convenient.

   If ONLY_CHEAP is nonzero, only do this if it is likely to be very
   cheap.

   Return zero if there is no suitable set-flag instruction
   available on this machine.

   Once expand_expr has been called on the arguments of the comparison,
   we are committed to doing the store flag, since it is not safe to
   re-evaluate the expression.  We emit the store-flag insn by calling
   emit_store_flag, but only expand the arguments if we have a reason
   to believe that emit_store_flag will be successful.  If we think that
   it will, but it isn't, we have to simulate the store-flag with a
   set/jump/set sequence.  */

static rtx
do_store_flag (tree exp, rtx target, enum machine_mode mode, int only_cheap)
{
  enum rtx_code code;
  tree arg0, arg1, type;
  tree tem;
  enum machine_mode operand_mode;
  int invert = 0;
  int unsignedp;
  rtx op0, op1;
  enum insn_code icode;
  rtx subtarget = target;
  rtx result, label;

  /* If this is a TRUTH_NOT_EXPR, set a flag indicating we must invert the
     result at the end.  We can't simply invert the test since it would
     have already been inverted if it were valid.  This case occurs for
     some floating-point comparisons.  */

  if (TREE_CODE (exp) == TRUTH_NOT_EXPR)
    invert = 1, exp = TREE_OPERAND (exp, 0);

  arg0 = TREE_OPERAND (exp, 0);
  arg1 = TREE_OPERAND (exp, 1);

  /* Don't crash if the comparison was erroneous.  */
  if (arg0 == error_mark_node || arg1 == error_mark_node)
    return const0_rtx;

  type = TREE_TYPE (arg0);
  operand_mode = TYPE_MODE (type);
  unsignedp = TREE_UNSIGNED (type);

  /* We won't bother with BLKmode store-flag operations because it would mean
     passing a lot of information to emit_store_flag.  */
  if (operand_mode == BLKmode)
    return 0;

  /* We won't bother with store-flag operations involving function pointers
     when function pointers must be canonicalized before comparisons.  */
#ifdef HAVE_canonicalize_funcptr_for_compare
  if (HAVE_canonicalize_funcptr_for_compare
      && ((TREE_CODE (TREE_TYPE (TREE_OPERAND (exp, 0))) == POINTER_TYPE
           && (TREE_CODE (TREE_TYPE (TREE_TYPE (TREE_OPERAND (exp, 0))))
               == FUNCTION_TYPE))
          || (TREE_CODE (TREE_TYPE (TREE_OPERAND (exp, 1))) == POINTER_TYPE
              && (TREE_CODE (TREE_TYPE (TREE_TYPE (TREE_OPERAND (exp, 1))))
                  == FUNCTION_TYPE))))
    return 0;
#endif

  STRIP_NOPS (arg0);
  STRIP_NOPS (arg1);

  /* Get the rtx comparison code to use.  We know that EXP is a comparison
     operation of some type.  Some comparisons against 1 and -1 can be
     converted to comparisons with zero.  Do so here so that the tests
     below will be aware that we have a comparison with zero.   These
     tests will not catch constants in the first operand, but constants
     are rarely passed as the first operand.  */

  switch (TREE_CODE (exp))
    {
    case EQ_EXPR:
      code = EQ;
      break;
    case NE_EXPR:
      code = NE;
      break;
    case LT_EXPR:
      if (integer_onep (arg1))
        arg1 = integer_zero_node, code = unsignedp ? LEU : LE;
      else
        code = unsignedp ? LTU : LT;
      break;
    case LE_EXPR:
      if (! unsignedp && integer_all_onesp (arg1))
        arg1 = integer_zero_node, code = LT;
      else
        code = unsignedp ? LEU : LE;
      break;
    case GT_EXPR:
      if (! unsignedp && integer_all_onesp (arg1))
        arg1 = integer_zero_node, code = GE;
      else
        code = unsignedp ? GTU : GT;
      break;
    case GE_EXPR:
      if (integer_onep (arg1))
        arg1 = integer_zero_node, code = unsignedp ? GTU : GT;
      else
        code = unsignedp ? GEU : GE;
      break;

    case UNORDERED_EXPR:
      code = UNORDERED;
      break;
    case ORDERED_EXPR:
      code = ORDERED;
      break;
    case UNLT_EXPR:
      code = UNLT;
      break;
    case UNLE_EXPR:
      code = UNLE;
      break;
    case UNGT_EXPR:
      code = UNGT;
      break;
    case UNGE_EXPR:
      code = UNGE;
      break;
    case UNEQ_EXPR:
      code = UNEQ;
      break;

    default:
      abort ();
    }

  /* Put a constant second.  */
  if (TREE_CODE (arg0) == REAL_CST || TREE_CODE (arg0) == INTEGER_CST)
    {
      tem = arg0; arg0 = arg1; arg1 = tem;
      code = swap_condition (code);
    }

  /* If this is an equality or inequality test of a single bit, we can
     do this by shifting the bit being tested to the low-order bit and
     masking the result with the constant 1.  If the condition was EQ,
     we xor it with 1.  This does not require an scc insn and is faster
     than an scc insn even if we have it.

     The code to make this transformation was moved into fold_single_bit_test,
     so we just call into the folder and expand its result.  */

  if ((code == NE || code == EQ)
      && TREE_CODE (arg0) == BIT_AND_EXPR && integer_zerop (arg1)
      && integer_pow2p (TREE_OPERAND (arg0, 1)))
    {
      tree type = (*lang_hooks.types.type_for_mode) (mode, unsignedp);
      return expand_expr (fold_single_bit_test (code == NE ? NE_EXPR : EQ_EXPR,
                                                arg0, arg1, type),
                          target, VOIDmode, EXPAND_NORMAL);
    }

  /* Now see if we are likely to be able to do this.  Return if not.  */
  if (! can_compare_p (code, operand_mode, ccp_store_flag))
    return 0;

  icode = setcc_gen_code[(int) code];
  if (icode == CODE_FOR_nothing
      || (only_cheap && insn_data[(int) icode].operand[0].mode != mode))
    {
      /* We can only do this if it is one of the special cases that
         can be handled without an scc insn.  */
      if ((code == LT && integer_zerop (arg1))
          || (! only_cheap && code == GE && integer_zerop (arg1)))
        ;
      else if (BRANCH_COST >= 0
               && ! only_cheap && (code == NE || code == EQ)
               && TREE_CODE (type) != REAL_TYPE
               && ((abs_optab->handlers[(int) operand_mode].insn_code
                    != CODE_FOR_nothing)
                   || (ffs_optab->handlers[(int) operand_mode].insn_code
                       != CODE_FOR_nothing)))
        ;
      else
        return 0;
    }

  if (! get_subtarget (target)
      || GET_MODE (subtarget) != operand_mode)
    subtarget = 0;

  expand_operands (arg0, arg1, subtarget, &op0, &op1, 0);

  if (target == 0)
    target = gen_reg_rtx (mode);

  /* Pass copies of OP0 and OP1 in case they contain a QUEUED.  This is safe
     because, if the emit_store_flag does anything it will succeed and
     OP0 and OP1 will not be used subsequently.  */

  result = emit_store_flag (target, code,
                            queued_subexp_p (op0) ? copy_rtx (op0) : op0,
                            queued_subexp_p (op1) ? copy_rtx (op1) : op1,
                            operand_mode, unsignedp, 1);

  if (result)
    {
      if (invert)
        result = expand_binop (mode, xor_optab, result, const1_rtx,
                               result, 0, OPTAB_LIB_WIDEN);
      return result;
    }

  /* If this failed, we have to do this with set/compare/jump/set code.  */
  if (GET_CODE (target) != REG
      || reg_mentioned_p (target, op0) || reg_mentioned_p (target, op1))
    target = gen_reg_rtx (GET_MODE (target));

  emit_move_insn (target, invert ? const0_rtx : const1_rtx);
  result = compare_from_rtx (op0, op1, code, unsignedp,
                             operand_mode, NULL_RTX);
  if (GET_CODE (result) == CONST_INT)
    return (((result == const0_rtx && ! invert)
             || (result != const0_rtx && invert))
            ? const0_rtx : const1_rtx);

  /* The code of RESULT may not match CODE if compare_from_rtx
     decided to swap its operands and reverse the original code.

     We know that compare_from_rtx returns either a CONST_INT or
     a new comparison code, so it is safe to just extract the
     code from RESULT.  */
  code = GET_CODE (result);

  label = gen_label_rtx ();
  if (bcc_gen_fctn[(int) code] == 0)
    abort ();

  emit_jump_insn ((*bcc_gen_fctn[(int) code]) (label));
  emit_move_insn (target, invert ? const1_rtx : const0_rtx);
  emit_label (label);

  return target;
}
\f

/* Stubs in case we haven't got a casesi insn.  */
#ifndef HAVE_casesi
# define HAVE_casesi 0
# define gen_casesi(a, b, c, d, e) (0)
# define CODE_FOR_casesi CODE_FOR_nothing
#endif

/* If the machine does not have a case insn that compares the bounds,
   this means extra overhead for dispatch tables, which raises the
   threshold for using them.  */
#ifndef CASE_VALUES_THRESHOLD
#define CASE_VALUES_THRESHOLD (HAVE_casesi ? 4 : 5)
#endif /* CASE_VALUES_THRESHOLD */

unsigned int
case_values_threshold (void)
{
  return CASE_VALUES_THRESHOLD;
}

/* Attempt to generate a casesi instruction.  Returns 1 if successful,
   0 otherwise (i.e. if there is no casesi instruction).  */
int
try_casesi (tree index_type, tree index_expr, tree minval, tree range,
            rtx table_label ATTRIBUTE_UNUSED, rtx default_label)
{
  enum machine_mode index_mode = SImode;
  int index_bits = GET_MODE_BITSIZE (index_mode);
  rtx op1, op2, index;
  enum machine_mode op_mode;

  if (! HAVE_casesi)
    return 0;

  /* Convert the index to SImode.  */
  if (GET_MODE_BITSIZE (TYPE_MODE (index_type)) > GET_MODE_BITSIZE (index_mode))
    {
      enum machine_mode omode = TYPE_MODE (index_type);
      rtx rangertx = expand_expr (range, NULL_RTX, VOIDmode, 0);

      /* We must handle the endpoints in the original mode.  */
      index_expr = build (MINUS_EXPR, index_type,
                          index_expr, minval);
      minval = integer_zero_node;
      index = expand_expr (index_expr, NULL_RTX, VOIDmode, 0);
      emit_cmp_and_jump_insns (rangertx, index, LTU, NULL_RTX,
                               omode, 1, default_label);
      /* Now we can safely truncate.  */
      index = convert_to_mode (index_mode, index, 0);
    }
  else
    {
      if (TYPE_MODE (index_type) != index_mode)
        {
          index_expr = convert ((*lang_hooks.types.type_for_size)
                                (index_bits, 0), index_expr);
          index_type = TREE_TYPE (index_expr);
        }

      index = expand_expr (index_expr, NULL_RTX, VOIDmode, 0);
    }
  emit_queue ();
  index = protect_from_queue (index, 0);
  do_pending_stack_adjust ();

  op_mode = insn_data[(int) CODE_FOR_casesi].operand[0].mode;
  if (! (*insn_data[(int) CODE_FOR_casesi].operand[0].predicate)
      (index, op_mode))
    index = copy_to_mode_reg (op_mode, index);

  op1 = expand_expr (minval, NULL_RTX, VOIDmode, 0);

  op_mode = insn_data[(int) CODE_FOR_casesi].operand[1].mode;
  op1 = convert_modes (op_mode, TYPE_MODE (TREE_TYPE (minval)),
                       op1, TREE_UNSIGNED (TREE_TYPE (minval)));
  if (! (*insn_data[(int) CODE_FOR_casesi].operand[1].predicate)
      (op1, op_mode))
    op1 = copy_to_mode_reg (op_mode, op1);

  op2 = expand_expr (range, NULL_RTX, VOIDmode, 0);

  op_mode = insn_data[(int) CODE_FOR_casesi].operand[2].mode;
  op2 = convert_modes (op_mode, TYPE_MODE (TREE_TYPE (range)),
                       op2, TREE_UNSIGNED (TREE_TYPE (range)));
  if (! (*insn_data[(int) CODE_FOR_casesi].operand[2].predicate)
      (op2, op_mode))
    op2 = copy_to_mode_reg (op_mode, op2);

  emit_jump_insn (gen_casesi (index, op1, op2,
                              table_label, default_label));
  return 1;
}

/* Attempt to generate a tablejump instruction; same concept.  */
#ifndef HAVE_tablejump
#define HAVE_tablejump 0
#define gen_tablejump(x, y) (0)
#endif

/* Subroutine of the next function.

   INDEX is the value being switched on, with the lowest value
   in the table already subtracted.
   MODE is its expected mode (needed if INDEX is constant).
   RANGE is the length of the jump table.
   TABLE_LABEL is a CODE_LABEL rtx for the table itself.

   DEFAULT_LABEL is a CODE_LABEL rtx to jump to if the
   index value is out of range.  */

static void
do_tablejump (rtx index, enum machine_mode mode, rtx range, rtx table_label,
              rtx default_label)
{
  rtx temp, vector;

  if (INTVAL (range) > cfun->max_jumptable_ents)
    cfun->max_jumptable_ents = INTVAL (range);

  /* Do an unsigned comparison (in the proper mode) between the index
     expression and the value which represents the length of the range.
     Since we just finished subtracting the lower bound of the range
     from the index expression, this comparison allows us to simultaneously
     check that the original index expression value is both greater than
     or equal to the minimum value of the range and less than or equal to
     the maximum value of the range.  */

  emit_cmp_and_jump_insns (index, range, GTU, NULL_RTX, mode, 1,
                           default_label);

  /* If index is in range, it must fit in Pmode.
     Convert to Pmode so we can index with it.  */
  if (mode != Pmode)
    index = convert_to_mode (Pmode, index, 1);

  /* Don't let a MEM slip through, because then INDEX that comes
     out of PIC_CASE_VECTOR_ADDRESS won't be a valid address,
     and break_out_memory_refs will go to work on it and mess it up.  */
#ifdef PIC_CASE_VECTOR_ADDRESS
  if (flag_pic && GET_CODE (index) != REG)
    index = copy_to_mode_reg (Pmode, index);
#endif

  /* If flag_force_addr were to affect this address
     it could interfere with the tricky assumptions made
     about addresses that contain label-refs,
     which may be valid only very near the tablejump itself.  */
  /* ??? The only correct use of CASE_VECTOR_MODE is the one inside the
     GET_MODE_SIZE, because this indicates how large insns are.  The other
     uses should all be Pmode, because they are addresses.  This code
     could fail if addresses and insns are not the same size.  */
  index = gen_rtx_PLUS (Pmode,
                        gen_rtx_MULT (Pmode, index,
                                      GEN_INT (GET_MODE_SIZE (CASE_VECTOR_MODE))),
                        gen_rtx_LABEL_REF (Pmode, table_label));
#ifdef PIC_CASE_VECTOR_ADDRESS
  if (flag_pic)
    index = PIC_CASE_VECTOR_ADDRESS (index);
  else
#endif
    index = memory_address_noforce (CASE_VECTOR_MODE, index);
  temp = gen_reg_rtx (CASE_VECTOR_MODE);
  vector = gen_rtx_MEM (CASE_VECTOR_MODE, index);
  RTX_UNCHANGING_P (vector) = 1;
  MEM_NOTRAP_P (vector) = 1;
  convert_move (temp, vector, 0);

  emit_jump_insn (gen_tablejump (temp, table_label));

  /* If we are generating PIC code or if the table is PC-relative, the
     table and JUMP_INSN must be adjacent, so don't output a BARRIER.  */
  if (! CASE_VECTOR_PC_RELATIVE && ! flag_pic)
    emit_barrier ();
}

int
try_tablejump (tree index_type, tree index_expr, tree minval, tree range,
               rtx table_label, rtx default_label)
{
  rtx index;

  if (! HAVE_tablejump)
    return 0;

  index_expr = fold (build (MINUS_EXPR, index_type,
                            convert (index_type, index_expr),
                            convert (index_type, minval)));
  index = expand_expr (index_expr, NULL_RTX, VOIDmode, 0);
  emit_queue ();
  index = protect_from_queue (index, 0);
  do_pending_stack_adjust ();

  do_tablejump (index, TYPE_MODE (index_type),
                convert_modes (TYPE_MODE (index_type),
                               TYPE_MODE (TREE_TYPE (range)),
                               expand_expr (range, NULL_RTX,
                                            VOIDmode, 0),
                               TREE_UNSIGNED (TREE_TYPE (range))),
                table_label, default_label);
  return 1;
}

/* Nonzero if the mode is a valid vector mode for this architecture.
   This returns nonzero even if there is no hardware support for the
   vector mode, but we can emulate with narrower modes.  */

int
vector_mode_valid_p (enum machine_mode mode)
{
  enum mode_class class = GET_MODE_CLASS (mode);
  enum machine_mode innermode;

  /* Doh!  What's going on?  */
  if (class != MODE_VECTOR_INT
      && class != MODE_VECTOR_FLOAT)
    return 0;

  /* Hardware support.  Woo hoo!  */
  if (VECTOR_MODE_SUPPORTED_P (mode))
    return 1;

  innermode = GET_MODE_INNER (mode);

  /* We should probably return 1 if requesting V4DI and we have no DI,
     but we have V2DI, but this is probably very unlikely.  */

  /* If we have support for the inner mode, we can safely emulate it.
     We may not have V2DI, but me can emulate with a pair of DIs.  */
  return mov_optab->handlers[innermode].insn_code != CODE_FOR_nothing;
}

/* Return a CONST_VECTOR rtx for a VECTOR_CST tree.  */
static rtx
const_vector_from_tree (tree exp)
{
  rtvec v;
  int units, i;
  tree link, elt;
  enum machine_mode inner, mode;

  mode = TYPE_MODE (TREE_TYPE (exp));

  if (is_zeros_p (exp))
    return CONST0_RTX (mode);

  units = GET_MODE_NUNITS (mode);
  inner = GET_MODE_INNER (mode);

  v = rtvec_alloc (units);

  link = TREE_VECTOR_CST_ELTS (exp);
  for (i = 0; link; link = TREE_CHAIN (link), ++i)
    {
      elt = TREE_VALUE (link);

      if (TREE_CODE (elt) == REAL_CST)
        RTVEC_ELT (v, i) = CONST_DOUBLE_FROM_REAL_VALUE (TREE_REAL_CST (elt),
                                                         inner);
      else
        RTVEC_ELT (v, i) = immed_double_const (TREE_INT_CST_LOW (elt),
                                               TREE_INT_CST_HIGH (elt),
                                               inner);
    }

  /* Initialize remaining elements to 0.  */
  for (; i < units; ++i)
    RTVEC_ELT (v, i) = CONST0_RTX (inner);

  return gen_rtx_raw_CONST_VECTOR (mode, v);
}

#include "gt-expr.h"