* Makefile.in (c-decl.o): Depend on rtl.h and expr.h.

[pf3gnuchains/gcc-fork.git] / gcc / explow.c

/* Subroutines for manipulating rtx's in semantically interesting ways.
   Copyright (C) 1987, 1991, 1994, 1995, 1996, 1997, 1998,
   1999, 2000 Free Software Foundation, Inc.

This file is part of GNU CC.

GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING.  If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */


#include "config.h"
#include "system.h"
#include "toplev.h"
#include "rtl.h"
#include "tree.h"
#include "tm_p.h"
#include "flags.h"
#include "function.h"
#include "expr.h"
#include "hard-reg-set.h"
#include "insn-config.h"
#include "recog.h"
#include "insn-flags.h"
#include "insn-codes.h"

#if !defined PREFERRED_STACK_BOUNDARY && defined STACK_BOUNDARY
#define PREFERRED_STACK_BOUNDARY STACK_BOUNDARY
#endif

static rtx break_out_memory_refs        PARAMS ((rtx));
static void emit_stack_probe            PARAMS ((rtx));


/* Truncate and perhaps sign-extend C as appropriate for MODE.  */

HOST_WIDE_INT
trunc_int_for_mode (c, mode)
     HOST_WIDE_INT c;
     enum machine_mode mode;
{
  int width = GET_MODE_BITSIZE (mode);

  /* We clear out all bits that don't belong in MODE, unless they and our
     sign bit are all one.  So we get either a reasonable negative
     value or a reasonable unsigned value.  */

  if (width < HOST_BITS_PER_WIDE_INT
      && ((c & ((HOST_WIDE_INT) (-1) << (width - 1)))
           != ((HOST_WIDE_INT) (-1) << (width - 1))))
    c &= ((HOST_WIDE_INT) 1 << width) - 1;

  /* If this would be an entire word for the target, but is not for
     the host, then sign-extend on the host so that the number will look
     the same way on the host that it would on the target.

     For example, when building a 64 bit alpha hosted 32 bit sparc
     targeted compiler, then we want the 32 bit unsigned value -1 to be
     represented as a 64 bit value -1, and not as 0x00000000ffffffff.
     The later confuses the sparc backend.  */

  if (BITS_PER_WORD < HOST_BITS_PER_WIDE_INT
      && BITS_PER_WORD == width
      && (c & ((HOST_WIDE_INT) 1 << (width - 1))))
    c |= ((HOST_WIDE_INT) (-1) << width);

  return c;
}

/* Return an rtx for the sum of X and the integer C.

   This function should be used via the `plus_constant' macro.  */

rtx
plus_constant_wide (x, c)
     register rtx x;
     register HOST_WIDE_INT c;
{
  register RTX_CODE code;
  register enum machine_mode mode;
  register rtx tem;
  int all_constant = 0;

  if (c == 0)
    return x;

 restart:

  code = GET_CODE (x);
  mode = GET_MODE (x);
  switch (code)
    {
    case CONST_INT:
      return GEN_INT (INTVAL (x) + c);

    case CONST_DOUBLE:
      {
        unsigned HOST_WIDE_INT l1 = CONST_DOUBLE_LOW (x);
        HOST_WIDE_INT h1 = CONST_DOUBLE_HIGH (x);
        unsigned HOST_WIDE_INT l2 = c;
        HOST_WIDE_INT h2 = c < 0 ? ~0 : 0;
        unsigned HOST_WIDE_INT lv;
        HOST_WIDE_INT hv;

        add_double (l1, h1, l2, h2, &lv, &hv);

        return immed_double_const (lv, hv, VOIDmode);
      }

    case MEM:
      /* If this is a reference to the constant pool, try replacing it with
         a reference to a new constant.  If the resulting address isn't
         valid, don't return it because we have no way to validize it.  */
      if (GET_CODE (XEXP (x, 0)) == SYMBOL_REF
          && CONSTANT_POOL_ADDRESS_P (XEXP (x, 0)))
        {
          /* Any rtl we create here must go in a saveable obstack, since
             we might have been called from within combine.  */
          push_obstacks_nochange ();
          rtl_in_saveable_obstack ();
          tem
            = force_const_mem (GET_MODE (x),
                               plus_constant (get_pool_constant (XEXP (x, 0)),
                                              c));
          pop_obstacks ();
          if (memory_address_p (GET_MODE (tem), XEXP (tem, 0)))
            return tem;
        }
      break;

    case CONST:
      /* If adding to something entirely constant, set a flag
         so that we can add a CONST around the result.  */
      x = XEXP (x, 0);
      all_constant = 1;
      goto restart;

    case SYMBOL_REF:
    case LABEL_REF:
      all_constant = 1;
      break;

    case PLUS:
      /* The interesting case is adding the integer to a sum.
         Look for constant term in the sum and combine
         with C.  For an integer constant term, we make a combined
         integer.  For a constant term that is not an explicit integer,
         we cannot really combine, but group them together anyway.  

         Restart or use a recursive call in case the remaining operand is
         something that we handle specially, such as a SYMBOL_REF.

         We may not immediately return from the recursive call here, lest
         all_constant gets lost.  */

      if (GET_CODE (XEXP (x, 1)) == CONST_INT)
        {
          c += INTVAL (XEXP (x, 1));

          if (GET_MODE (x) != VOIDmode)
            c = trunc_int_for_mode (c, GET_MODE (x));

          x = XEXP (x, 0);
          goto restart;
        }
      else if (CONSTANT_P (XEXP (x, 0)))
        {
          x = gen_rtx_PLUS (mode,
                            plus_constant (XEXP (x, 0), c),
                            XEXP (x, 1));
          c = 0;
        }
      else if (CONSTANT_P (XEXP (x, 1)))
        {
          x = gen_rtx_PLUS (mode,
                            XEXP (x, 0),
                            plus_constant (XEXP (x, 1), c));
          c = 0;
        }
      break;
      
    default:
      break;
    }

  if (c != 0)
    x = gen_rtx_PLUS (mode, x, GEN_INT (c));

  if (GET_CODE (x) == SYMBOL_REF || GET_CODE (x) == LABEL_REF)
    return x;
  else if (all_constant)
    return gen_rtx_CONST (mode, x);
  else
    return x;
}

/* This is the same as `plus_constant', except that it handles LO_SUM.

   This function should be used via the `plus_constant_for_output' macro.  */

rtx
plus_constant_for_output_wide (x, c)
     register rtx x;
     register HOST_WIDE_INT c;
{
  register enum machine_mode mode = GET_MODE (x);

  if (GET_CODE (x) == LO_SUM)
    return gen_rtx_LO_SUM (mode, XEXP (x, 0),
                           plus_constant_for_output (XEXP (x, 1), c));

  else
    return plus_constant (x, c);
}
\f
/* If X is a sum, return a new sum like X but lacking any constant terms.
   Add all the removed constant terms into *CONSTPTR.
   X itself is not altered.  The result != X if and only if
   it is not isomorphic to X.  */

rtx
eliminate_constant_term (x, constptr)
     rtx x;
     rtx *constptr;
{
  register rtx x0, x1;
  rtx tem;

  if (GET_CODE (x) != PLUS)
    return x;

  /* First handle constants appearing at this level explicitly.  */
  if (GET_CODE (XEXP (x, 1)) == CONST_INT
      && 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x), *constptr,
                                                XEXP (x, 1)))
      && GET_CODE (tem) == CONST_INT)
    {
      *constptr = tem;
      return eliminate_constant_term (XEXP (x, 0), constptr);
    }

  tem = const0_rtx;
  x0 = eliminate_constant_term (XEXP (x, 0), &tem);
  x1 = eliminate_constant_term (XEXP (x, 1), &tem);
  if ((x1 != XEXP (x, 1) || x0 != XEXP (x, 0))
      && 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x),
                                                *constptr, tem))
      && GET_CODE (tem) == CONST_INT)
    {
      *constptr = tem;
      return gen_rtx_PLUS (GET_MODE (x), x0, x1);
    }

  return x;
}

/* Returns the insn that next references REG after INSN, or 0
   if REG is clobbered before next referenced or we cannot find
   an insn that references REG in a straight-line piece of code.  */

rtx
find_next_ref (reg, insn)
     rtx reg;
     rtx insn;
{
  rtx next;

  for (insn = NEXT_INSN (insn); insn; insn = next)
    {
      next = NEXT_INSN (insn);
      if (GET_CODE (insn) == NOTE)
        continue;
      if (GET_CODE (insn) == CODE_LABEL
          || GET_CODE (insn) == BARRIER)
        return 0;
      if (GET_CODE (insn) == INSN
          || GET_CODE (insn) == JUMP_INSN
          || GET_CODE (insn) == CALL_INSN)
        {
          if (reg_set_p (reg, insn))
            return 0;
          if (reg_mentioned_p (reg, PATTERN (insn)))
            return insn;
          if (GET_CODE (insn) == JUMP_INSN)
            {
              if (any_uncondjump_p (insn))
                next = JUMP_LABEL (insn);
              else
                return 0;
            }
          if (GET_CODE (insn) == CALL_INSN
              && REGNO (reg) < FIRST_PSEUDO_REGISTER
              && call_used_regs[REGNO (reg)])
            return 0;
        }
      else
        abort ();
    }
  return 0;
}

/* Return an rtx for the size in bytes of the value of EXP.  */

rtx
expr_size (exp)
     tree exp;
{
  tree size = size_in_bytes (TREE_TYPE (exp));

  if (TREE_CODE (size) != INTEGER_CST
      && contains_placeholder_p (size))
    size = build (WITH_RECORD_EXPR, sizetype, size, exp);

  return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype),
                      EXPAND_MEMORY_USE_BAD);
}
\f
/* Return a copy of X in which all memory references
   and all constants that involve symbol refs
   have been replaced with new temporary registers.
   Also emit code to load the memory locations and constants
   into those registers.

   If X contains no such constants or memory references,
   X itself (not a copy) is returned.

   If a constant is found in the address that is not a legitimate constant
   in an insn, it is left alone in the hope that it might be valid in the
   address.

   X may contain no arithmetic except addition, subtraction and multiplication.
   Values returned by expand_expr with 1 for sum_ok fit this constraint.  */

static rtx
break_out_memory_refs (x)
     register rtx x;
{
  if (GET_CODE (x) == MEM
      || (CONSTANT_P (x) && CONSTANT_ADDRESS_P (x)
          && GET_MODE (x) != VOIDmode))
    x = force_reg (GET_MODE (x), x);
  else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS
           || GET_CODE (x) == MULT)
    {
      register rtx op0 = break_out_memory_refs (XEXP (x, 0));
      register rtx op1 = break_out_memory_refs (XEXP (x, 1));

      if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
        x = gen_rtx_fmt_ee (GET_CODE (x), Pmode, op0, op1);
    }

  return x;
}

#ifdef POINTERS_EXTEND_UNSIGNED

/* Given X, a memory address in ptr_mode, convert it to an address
   in Pmode, or vice versa (TO_MODE says which way).  We take advantage of
   the fact that pointers are not allowed to overflow by commuting arithmetic
   operations over conversions so that address arithmetic insns can be
   used.  */

rtx
convert_memory_address (to_mode, x)
     enum machine_mode to_mode;
     rtx x;
{
  enum machine_mode from_mode = to_mode == ptr_mode ? Pmode : ptr_mode;
  rtx temp;

  /* Here we handle some special cases.  If none of them apply, fall through
     to the default case.  */
  switch (GET_CODE (x))
    {
    case CONST_INT:
    case CONST_DOUBLE:
      return x;

    case LABEL_REF:
      temp = gen_rtx_LABEL_REF (to_mode, XEXP (x, 0));
      LABEL_REF_NONLOCAL_P (temp) = LABEL_REF_NONLOCAL_P (x);
      return temp;

    case SYMBOL_REF:
      temp = gen_rtx_SYMBOL_REF (to_mode, XSTR (x, 0));
      SYMBOL_REF_FLAG (temp) = SYMBOL_REF_FLAG (x);
      CONSTANT_POOL_ADDRESS_P (temp) = CONSTANT_POOL_ADDRESS_P (x);
      return temp;

    case CONST:
      return gen_rtx_CONST (to_mode, 
                            convert_memory_address (to_mode, XEXP (x, 0)));

    case PLUS:
    case MULT:
      /* For addition the second operand is a small constant, we can safely
         permute the conversion and addition operation.  We can always safely
         permute them if we are making the address narrower.  In addition,
         always permute the operations if this is a constant.  */
      if (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (from_mode)
          || (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 1)) == CONST_INT
              && (INTVAL (XEXP (x, 1)) + 20000 < 40000
                  || CONSTANT_P (XEXP (x, 0)))))
        return gen_rtx_fmt_ee (GET_CODE (x), to_mode, 
                               convert_memory_address (to_mode, XEXP (x, 0)),
                               convert_memory_address (to_mode, XEXP (x, 1)));
      break;
      
    default:
      break;
    }

  return convert_modes (to_mode, from_mode,
                        x, POINTERS_EXTEND_UNSIGNED);
}
#endif

/* Given a memory address or facsimile X, construct a new address,
   currently equivalent, that is stable: future stores won't change it.

   X must be composed of constants, register and memory references
   combined with addition, subtraction and multiplication:
   in other words, just what you can get from expand_expr if sum_ok is 1.

   Works by making copies of all regs and memory locations used
   by X and combining them the same way X does.
   You could also stabilize the reference to this address
   by copying the address to a register with copy_to_reg;
   but then you wouldn't get indexed addressing in the reference.  */

rtx
copy_all_regs (x)
     register rtx x;
{
  if (GET_CODE (x) == REG)
    {
      if (REGNO (x) != FRAME_POINTER_REGNUM
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
          && REGNO (x) != HARD_FRAME_POINTER_REGNUM
#endif
          )
        x = copy_to_reg (x);
    }
  else if (GET_CODE (x) == MEM)
    x = copy_to_reg (x);
  else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS
           || GET_CODE (x) == MULT)
    {
      register rtx op0 = copy_all_regs (XEXP (x, 0));
      register rtx op1 = copy_all_regs (XEXP (x, 1));
      if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
        x = gen_rtx_fmt_ee (GET_CODE (x), Pmode, op0, op1);
    }
  return x;
}
\f
/* Return something equivalent to X but valid as a memory address
   for something of mode MODE.  When X is not itself valid, this
   works by copying X or subexpressions of it into registers.  */

rtx
memory_address (mode, x)
     enum machine_mode mode;
     register rtx x;
{
  register rtx oldx = x;

  if (GET_CODE (x) == ADDRESSOF)
    return x;

#ifdef POINTERS_EXTEND_UNSIGNED
  if (GET_MODE (x) == ptr_mode)
    x = convert_memory_address (Pmode, x);
#endif

  /* By passing constant addresses thru registers
     we get a chance to cse them.  */
  if (! cse_not_expected && CONSTANT_P (x) && CONSTANT_ADDRESS_P (x))
    x = force_reg (Pmode, x);

  /* Accept a QUEUED that refers to a REG
     even though that isn't a valid address.
     On attempting to put this in an insn we will call protect_from_queue
     which will turn it into a REG, which is valid.  */
  else if (GET_CODE (x) == QUEUED
      && GET_CODE (QUEUED_VAR (x)) == REG)
    ;

  /* We get better cse by rejecting indirect addressing at this stage.
     Let the combiner create indirect addresses where appropriate.
     For now, generate the code so that the subexpressions useful to share
     are visible.  But not if cse won't be done!  */
  else
    {
      if (! cse_not_expected && GET_CODE (x) != REG)
        x = break_out_memory_refs (x);

      /* At this point, any valid address is accepted.  */
      GO_IF_LEGITIMATE_ADDRESS (mode, x, win);

      /* If it was valid before but breaking out memory refs invalidated it,
         use it the old way.  */
      if (memory_address_p (mode, oldx))
        goto win2;

      /* Perform machine-dependent transformations on X
         in certain cases.  This is not necessary since the code
         below can handle all possible cases, but machine-dependent
         transformations can make better code.  */
      LEGITIMIZE_ADDRESS (x, oldx, mode, win);

      /* PLUS and MULT can appear in special ways
         as the result of attempts to make an address usable for indexing.
         Usually they are dealt with by calling force_operand, below.
         But a sum containing constant terms is special
         if removing them makes the sum a valid address:
         then we generate that address in a register
         and index off of it.  We do this because it often makes
         shorter code, and because the addresses thus generated
         in registers often become common subexpressions.  */
      if (GET_CODE (x) == PLUS)
        {
          rtx constant_term = const0_rtx;
          rtx y = eliminate_constant_term (x, &constant_term);
          if (constant_term == const0_rtx
              || ! memory_address_p (mode, y))
            x = force_operand (x, NULL_RTX);
          else
            {
              y = gen_rtx_PLUS (GET_MODE (x), copy_to_reg (y), constant_term);
              if (! memory_address_p (mode, y))
                x = force_operand (x, NULL_RTX);
              else
                x = y;
            }
        }

      else if (GET_CODE (x) == MULT || GET_CODE (x) == MINUS)
        x = force_operand (x, NULL_RTX);

      /* If we have a register that's an invalid address,
         it must be a hard reg of the wrong class.  Copy it to a pseudo.  */
      else if (GET_CODE (x) == REG)
        x = copy_to_reg (x);

      /* Last resort: copy the value to a register, since
         the register is a valid address.  */
      else
        x = force_reg (Pmode, x);

      goto done;

    win2:
      x = oldx;
    win:
      if (flag_force_addr && ! cse_not_expected && GET_CODE (x) != REG
          /* Don't copy an addr via a reg if it is one of our stack slots.  */
          && ! (GET_CODE (x) == PLUS
                && (XEXP (x, 0) == virtual_stack_vars_rtx
                    || XEXP (x, 0) == virtual_incoming_args_rtx)))
        {
          if (general_operand (x, Pmode))
            x = force_reg (Pmode, x);
          else
            x = force_operand (x, NULL_RTX);
        }
    }

 done:

  /* If we didn't change the address, we are done.  Otherwise, mark
     a reg as a pointer if we have REG or REG + CONST_INT.  */
  if (oldx == x)
    return x;
  else if (GET_CODE (x) == REG)
    mark_reg_pointer (x, BITS_PER_UNIT);
  else if (GET_CODE (x) == PLUS
           && GET_CODE (XEXP (x, 0)) == REG
           && GET_CODE (XEXP (x, 1)) == CONST_INT)
    mark_reg_pointer (XEXP (x, 0), BITS_PER_UNIT);

  /* OLDX may have been the address on a temporary.  Update the address
     to indicate that X is now used.  */
  update_temp_slot_address (oldx, x);

  return x;
}

/* Like `memory_address' but pretend `flag_force_addr' is 0.  */

rtx
memory_address_noforce (mode, x)
     enum machine_mode mode;
     rtx x;
{
  int ambient_force_addr = flag_force_addr;
  rtx val;

  flag_force_addr = 0;
  val = memory_address (mode, x);
  flag_force_addr = ambient_force_addr;
  return val;
}

/* Convert a mem ref into one with a valid memory address.
   Pass through anything else unchanged.  */

rtx
validize_mem (ref)
     rtx ref;
{
  if (GET_CODE (ref) != MEM)
    return ref;
  if (memory_address_p (GET_MODE (ref), XEXP (ref, 0)))
    return ref;
  /* Don't alter REF itself, since that is probably a stack slot.  */
  return change_address (ref, GET_MODE (ref), XEXP (ref, 0));
}
\f
/* Given REF, a MEM, and T, either the type of X or the expression
   corresponding to REF, set the memory attributes.  OBJECTP is nonzero
   if we are making a new object of this type.  */

void
set_mem_attributes (ref, t, objectp)
     rtx ref;
     tree t;
     int objectp;
{
  tree type = TYPE_P (t) ? t : TREE_TYPE (t);

  /* Get the alias set from the expression or type (perhaps using a
     front-end routine) and then copy bits from the type.  */
  MEM_ALIAS_SET (ref) = get_alias_set (t);
  RTX_UNCHANGING_P (ref) = TYPE_READONLY (type);
  MEM_VOLATILE_P (ref) = TYPE_VOLATILE (type);
  MEM_IN_STRUCT_P (ref) = AGGREGATE_TYPE_P (type);

  /* If we are making an object of this type, we know that it is a scalar if
     the type is not an aggregate. */
  if (objectp && ! AGGREGATE_TYPE_P (type))
    MEM_SCALAR_P (ref) = 1;

  /* If T is a type, this is all we can do.  Otherwise, we may be able
     to deduce some more information about the expression.  */
  if (TYPE_P (t))
    return;

  if (TREE_READONLY (t) || TREE_CODE_CLASS (TREE_CODE (t)) == 'c')
    RTX_UNCHANGING_P (ref) = 1;
  if (TREE_THIS_VOLATILE (t))
    MEM_VOLATILE_P (ref) = 1;

  /* Now see if we can say more about whether it's an aggregate or
     scalar.  If we already know it's an aggregate, don't bother.  */
  if (MEM_IN_STRUCT_P (ref))
    return;

  /* Now remove any NOPs: they don't change what the underlying object is.
     Likewise for SAVE_EXPR.  */
  while (TREE_CODE (t) == NOP_EXPR || TREE_CODE (t) == CONVERT_EXPR
         || TREE_CODE (t) == NON_LVALUE_EXPR || TREE_CODE (t) == SAVE_EXPR)
    t = TREE_OPERAND (t, 0);

  /* Since we already know the type isn't an aggregate, if this is a decl,
     it must be a scalar.  Or if it is a reference into an aggregate,
     this is part of an aggregate.   Otherwise we don't know.  */
  if (DECL_P (t))
    MEM_SCALAR_P (ref) = 1;
  else if (TREE_CODE (t) == COMPONENT_REF || TREE_CODE (t) == ARRAY_REF
           || TREE_CODE (t) == BIT_FIELD_REF)
    MEM_IN_STRUCT_P (ref) = 1;
}
\f
/* Return a modified copy of X with its memory address copied
   into a temporary register to protect it from side effects.
   If X is not a MEM, it is returned unchanged (and not copied).
   Perhaps even if it is a MEM, if there is no need to change it.  */

rtx
stabilize (x)
     rtx x;
{
  register rtx addr;

  if (GET_CODE (x) != MEM)
    return x;

  addr = XEXP (x, 0);
  if (rtx_unstable_p (addr))
    {
      rtx temp = force_reg (Pmode, copy_all_regs (addr));
      rtx mem = gen_rtx_MEM (GET_MODE (x), temp);

      MEM_COPY_ATTRIBUTES (mem, x);
      return mem;
    }
  return x;
}
\f
/* Copy the value or contents of X to a new temp reg and return that reg.  */

rtx
copy_to_reg (x)
     rtx x;
{
  register rtx temp = gen_reg_rtx (GET_MODE (x));
 
  /* If not an operand, must be an address with PLUS and MULT so
     do the computation.  */ 
  if (! general_operand (x, VOIDmode))
    x = force_operand (x, temp);
  
  if (x != temp)
    emit_move_insn (temp, x);

  return temp;
}

/* Like copy_to_reg but always give the new register mode Pmode
   in case X is a constant.  */

rtx
copy_addr_to_reg (x)
     rtx x;
{
  return copy_to_mode_reg (Pmode, x);
}

/* Like copy_to_reg but always give the new register mode MODE
   in case X is a constant.  */

rtx
copy_to_mode_reg (mode, x)
     enum machine_mode mode;
     rtx x;
{
  register rtx temp = gen_reg_rtx (mode);
  
  /* If not an operand, must be an address with PLUS and MULT so
     do the computation.  */ 
  if (! general_operand (x, VOIDmode))
    x = force_operand (x, temp);

  if (GET_MODE (x) != mode && GET_MODE (x) != VOIDmode)
    abort ();
  if (x != temp)
    emit_move_insn (temp, x);
  return temp;
}

/* Load X into a register if it is not already one.
   Use mode MODE for the register.
   X should be valid for mode MODE, but it may be a constant which
   is valid for all integer modes; that's why caller must specify MODE.

   The caller must not alter the value in the register we return,
   since we mark it as a "constant" register.  */

rtx
force_reg (mode, x)
     enum machine_mode mode;
     rtx x;
{
  register rtx temp, insn, set;

  if (GET_CODE (x) == REG)
    return x;
  
  temp = gen_reg_rtx (mode);
  
  if (! general_operand (x, mode))
    x = force_operand (x, NULL_RTX);
  
  insn = emit_move_insn (temp, x);

  /* Let optimizers know that TEMP's value never changes
     and that X can be substituted for it.  Don't get confused
     if INSN set something else (such as a SUBREG of TEMP).  */
  if (CONSTANT_P (x)
      && (set = single_set (insn)) != 0
      && SET_DEST (set) == temp)
    {
      rtx note = find_reg_note (insn, REG_EQUAL, NULL_RTX);

      if (note)
        XEXP (note, 0) = x;
      else
        REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_EQUAL, x, REG_NOTES (insn));
    }
  return temp;
}

/* If X is a memory ref, copy its contents to a new temp reg and return
   that reg.  Otherwise, return X.  */

rtx
force_not_mem (x)
     rtx x;
{
  register rtx temp;
  if (GET_CODE (x) != MEM || GET_MODE (x) == BLKmode)
    return x;
  temp = gen_reg_rtx (GET_MODE (x));
  emit_move_insn (temp, x);
  return temp;
}

/* Copy X to TARGET (if it's nonzero and a reg)
   or to a new temp reg and return that reg.
   MODE is the mode to use for X in case it is a constant.  */

rtx
copy_to_suggested_reg (x, target, mode)
     rtx x, target;
     enum machine_mode mode;
{
  register rtx temp;

  if (target && GET_CODE (target) == REG)
    temp = target;
  else
    temp = gen_reg_rtx (mode);

  emit_move_insn (temp, x);
  return temp;
}
\f
/* Return the mode to use to store a scalar of TYPE and MODE.
   PUNSIGNEDP points to the signedness of the type and may be adjusted
   to show what signedness to use on extension operations.

   FOR_CALL is non-zero if this call is promoting args for a call.  */

enum machine_mode
promote_mode (type, mode, punsignedp, for_call)
     tree type;
     enum machine_mode mode;
     int *punsignedp;
     int for_call ATTRIBUTE_UNUSED;
{
  enum tree_code code = TREE_CODE (type);
  int unsignedp = *punsignedp;

#ifdef PROMOTE_FOR_CALL_ONLY
  if (! for_call)
    return mode;
#endif

  switch (code)
    {
#ifdef PROMOTE_MODE
    case INTEGER_TYPE:   case ENUMERAL_TYPE:   case BOOLEAN_TYPE:
    case CHAR_TYPE:      case REAL_TYPE:       case OFFSET_TYPE:
      PROMOTE_MODE (mode, unsignedp, type);
      break;
#endif

#ifdef POINTERS_EXTEND_UNSIGNED
    case REFERENCE_TYPE:
    case POINTER_TYPE:
      mode = Pmode;
      unsignedp = POINTERS_EXTEND_UNSIGNED;
      break;
#endif
      
    default:
      break;
    }

  *punsignedp = unsignedp;
  return mode;
}
\f
/* Adjust the stack pointer by ADJUST (an rtx for a number of bytes).
   This pops when ADJUST is positive.  ADJUST need not be constant.  */

void
adjust_stack (adjust)
     rtx adjust;
{
  rtx temp;
  adjust = protect_from_queue (adjust, 0);

  if (adjust == const0_rtx)
    return;

  /* We expect all variable sized adjustments to be multiple of
     PREFERRED_STACK_BOUNDARY.  */
  if (GET_CODE (adjust) == CONST_INT)
    stack_pointer_delta -= INTVAL (adjust);

  temp = expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
                       add_optab,
#else
                       sub_optab,
#endif
                       stack_pointer_rtx, adjust, stack_pointer_rtx, 0,
                       OPTAB_LIB_WIDEN);

  if (temp != stack_pointer_rtx)
    emit_move_insn (stack_pointer_rtx, temp);
}

/* Adjust the stack pointer by minus ADJUST (an rtx for a number of bytes).
   This pushes when ADJUST is positive.  ADJUST need not be constant.  */

void
anti_adjust_stack (adjust)
     rtx adjust;
{
  rtx temp;
  adjust = protect_from_queue (adjust, 0);

  if (adjust == const0_rtx)
    return;

  /* We expect all variable sized adjustments to be multiple of
     PREFERRED_STACK_BOUNDARY.  */
  if (GET_CODE (adjust) == CONST_INT)
    stack_pointer_delta += INTVAL (adjust);

  temp = expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
                       sub_optab,
#else
                       add_optab,
#endif
                       stack_pointer_rtx, adjust, stack_pointer_rtx, 0,
                       OPTAB_LIB_WIDEN);

  if (temp != stack_pointer_rtx)
    emit_move_insn (stack_pointer_rtx, temp);
}

/* Round the size of a block to be pushed up to the boundary required
   by this machine.  SIZE is the desired size, which need not be constant.  */

rtx
round_push (size)
     rtx size;
{
#ifdef PREFERRED_STACK_BOUNDARY
  int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
  if (align == 1)
    return size;
  if (GET_CODE (size) == CONST_INT)
    {
      int new = (INTVAL (size) + align - 1) / align * align;
      if (INTVAL (size) != new)
        size = GEN_INT (new);
    }
  else
    {
      /* CEIL_DIV_EXPR needs to worry about the addition overflowing,
         but we know it can't.  So add ourselves and then do
         TRUNC_DIV_EXPR.  */
      size = expand_binop (Pmode, add_optab, size, GEN_INT (align - 1),
                           NULL_RTX, 1, OPTAB_LIB_WIDEN);
      size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size, GEN_INT (align),
                            NULL_RTX, 1);
      size = expand_mult (Pmode, size, GEN_INT (align), NULL_RTX, 1);
    }
#endif /* PREFERRED_STACK_BOUNDARY */
  return size;
}
\f
/* Save the stack pointer for the purpose in SAVE_LEVEL.  PSAVE is a pointer
   to a previously-created save area.  If no save area has been allocated,
   this function will allocate one.  If a save area is specified, it
   must be of the proper mode.

   The insns are emitted after insn AFTER, if nonzero, otherwise the insns
   are emitted at the current position.  */

void
emit_stack_save (save_level, psave, after)
     enum save_level save_level;
     rtx *psave;
     rtx after;
{
  rtx sa = *psave;
  /* The default is that we use a move insn and save in a Pmode object.  */
  rtx (*fcn) PARAMS ((rtx, rtx)) = gen_move_insn;
  enum machine_mode mode = STACK_SAVEAREA_MODE (save_level);

  /* See if this machine has anything special to do for this kind of save.  */
  switch (save_level)
    {
#ifdef HAVE_save_stack_block
    case SAVE_BLOCK:
      if (HAVE_save_stack_block)
        fcn = gen_save_stack_block;
      break;
#endif
#ifdef HAVE_save_stack_function
    case SAVE_FUNCTION:
      if (HAVE_save_stack_function)
        fcn = gen_save_stack_function;
      break;
#endif
#ifdef HAVE_save_stack_nonlocal
    case SAVE_NONLOCAL:
      if (HAVE_save_stack_nonlocal)
        fcn = gen_save_stack_nonlocal;
      break;
#endif
    default:
      break;
    }

  /* If there is no save area and we have to allocate one, do so.  Otherwise
     verify the save area is the proper mode.  */

  if (sa == 0)
    {
      if (mode != VOIDmode)
        {
          if (save_level == SAVE_NONLOCAL)
            *psave = sa = assign_stack_local (mode, GET_MODE_SIZE (mode), 0);
          else
            *psave = sa = gen_reg_rtx (mode);
        }
    }
  else
    {
      if (mode == VOIDmode || GET_MODE (sa) != mode)
        abort ();
    }

  if (after)
    {
      rtx seq;

      start_sequence ();
      /* We must validize inside the sequence, to ensure that any instructions
         created by the validize call also get moved to the right place.  */
      if (sa != 0)
        sa = validize_mem (sa);
      emit_insn (fcn (sa, stack_pointer_rtx));
      seq = gen_sequence ();
      end_sequence ();
      emit_insn_after (seq, after);
    }
  else
    {
      if (sa != 0)
        sa = validize_mem (sa);
      emit_insn (fcn (sa, stack_pointer_rtx));
    }
}

/* Restore the stack pointer for the purpose in SAVE_LEVEL.  SA is the save
   area made by emit_stack_save.  If it is zero, we have nothing to do. 

   Put any emitted insns after insn AFTER, if nonzero, otherwise at 
   current position.  */

void
emit_stack_restore (save_level, sa, after)
     enum save_level save_level;
     rtx after;
     rtx sa;
{
  /* The default is that we use a move insn.  */
  rtx (*fcn) PARAMS ((rtx, rtx)) = gen_move_insn;

  /* See if this machine has anything special to do for this kind of save.  */
  switch (save_level)
    {
#ifdef HAVE_restore_stack_block
    case SAVE_BLOCK:
      if (HAVE_restore_stack_block)
        fcn = gen_restore_stack_block;
      break;
#endif
#ifdef HAVE_restore_stack_function
    case SAVE_FUNCTION:
      if (HAVE_restore_stack_function)
        fcn = gen_restore_stack_function;
      break;
#endif
#ifdef HAVE_restore_stack_nonlocal
    case SAVE_NONLOCAL:
      if (HAVE_restore_stack_nonlocal)
        fcn = gen_restore_stack_nonlocal;
      break;
#endif
    default:
      break;
    }

  if (sa != 0)
    sa = validize_mem (sa);

  if (after)
    {
      rtx seq;

      start_sequence ();
      emit_insn (fcn (stack_pointer_rtx, sa));
      seq = gen_sequence ();
      end_sequence ();
      emit_insn_after (seq, after);
    }
  else
    emit_insn (fcn (stack_pointer_rtx, sa));
}
\f
#ifdef SETJMP_VIA_SAVE_AREA
/* Optimize RTL generated by allocate_dynamic_stack_space for targets
   where SETJMP_VIA_SAVE_AREA is true.  The problem is that on these
   platforms, the dynamic stack space used can corrupt the original
   frame, thus causing a crash if a longjmp unwinds to it.  */

void
optimize_save_area_alloca (insns)
     rtx insns;
{
  rtx insn;

  for (insn = insns; insn; insn = NEXT_INSN(insn))
    {
      rtx note;

      if (GET_CODE (insn) != INSN)
        continue;

      for (note = REG_NOTES (insn); note; note = XEXP (note, 1))
        {
          if (REG_NOTE_KIND (note) != REG_SAVE_AREA)
            continue;

          if (!current_function_calls_setjmp)
            {
              rtx pat = PATTERN (insn);

              /* If we do not see the note in a pattern matching
                 these precise characteristics, we did something
                 entirely wrong in allocate_dynamic_stack_space. 

                 Note, one way this could happen is if SETJMP_VIA_SAVE_AREA
                 was defined on a machine where stacks grow towards higher
                 addresses.

                 Right now only supported port with stack that grow upward
                 is the HPPA and it does not define SETJMP_VIA_SAVE_AREA.  */
              if (GET_CODE (pat) != SET
                  || SET_DEST (pat) != stack_pointer_rtx
                  || GET_CODE (SET_SRC (pat)) != MINUS
                  || XEXP (SET_SRC (pat), 0) != stack_pointer_rtx)
                abort ();

              /* This will now be transformed into a (set REG REG)
                 so we can just blow away all the other notes.  */
              XEXP (SET_SRC (pat), 1) = XEXP (note, 0);
              REG_NOTES (insn) = NULL_RTX;
            }
          else
            {
              /* setjmp was called, we must remove the REG_SAVE_AREA
                 note so that later passes do not get confused by its
                 presence.  */
              if (note == REG_NOTES (insn))
                {
                  REG_NOTES (insn) = XEXP (note, 1);
                }
              else
                {
                  rtx srch;

                  for (srch = REG_NOTES (insn); srch; srch = XEXP (srch, 1))
                    if (XEXP (srch, 1) == note)
                      break;

                  if (srch == NULL_RTX)
                    abort();

                  XEXP (srch, 1) = XEXP (note, 1);
                }
            }
          /* Once we've seen the note of interest, we need not look at
             the rest of them.  */
          break;
        }
    }
}
#endif /* SETJMP_VIA_SAVE_AREA */

/* Return an rtx representing the address of an area of memory dynamically
   pushed on the stack.  This region of memory is always aligned to
   a multiple of BIGGEST_ALIGNMENT.

   Any required stack pointer alignment is preserved.

   SIZE is an rtx representing the size of the area.
   TARGET is a place in which the address can be placed.

   KNOWN_ALIGN is the alignment (in bits) that we know SIZE has.  */

rtx
allocate_dynamic_stack_space (size, target, known_align)
     rtx size;
     rtx target;
     int known_align;
{
#ifdef SETJMP_VIA_SAVE_AREA
  rtx setjmpless_size = NULL_RTX;
#endif

  /* If we're asking for zero bytes, it doesn't matter what we point
     to since we can't dereference it.  But return a reasonable
     address anyway.  */
  if (size == const0_rtx)
    return virtual_stack_dynamic_rtx;

  /* Otherwise, show we're calling alloca or equivalent.  */
  current_function_calls_alloca = 1;

  /* Ensure the size is in the proper mode.  */
  if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode)
    size = convert_to_mode (Pmode, size, 1);

  /* We can't attempt to minimize alignment necessary, because we don't
     know the final value of preferred_stack_boundary yet while executing
     this code.  */
#ifdef PREFERRED_STACK_BOUNDARY
  cfun->preferred_stack_boundary = PREFERRED_STACK_BOUNDARY;
#endif

  /* We will need to ensure that the address we return is aligned to
     BIGGEST_ALIGNMENT.  If STACK_DYNAMIC_OFFSET is defined, we don't
     always know its final value at this point in the compilation (it 
     might depend on the size of the outgoing parameter lists, for
     example), so we must align the value to be returned in that case.
     (Note that STACK_DYNAMIC_OFFSET will have a default non-zero value if
     STACK_POINTER_OFFSET or ACCUMULATE_OUTGOING_ARGS are defined).
     We must also do an alignment operation on the returned value if
     the stack pointer alignment is less strict that BIGGEST_ALIGNMENT.

     If we have to align, we must leave space in SIZE for the hole
     that might result from the alignment operation.  */

#if defined (STACK_DYNAMIC_OFFSET) || defined (STACK_POINTER_OFFSET) || ! defined (PREFERRED_STACK_BOUNDARY)
#define MUST_ALIGN 1
#else
#define MUST_ALIGN (PREFERRED_STACK_BOUNDARY < BIGGEST_ALIGNMENT)
#endif

  if (MUST_ALIGN)
    {
      if (GET_CODE (size) == CONST_INT)
        size = GEN_INT (INTVAL (size)
                        + (BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1));
      else
        size = expand_binop (Pmode, add_optab, size,
                             GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1),
                             NULL_RTX, 1, OPTAB_LIB_WIDEN);
    }

#ifdef SETJMP_VIA_SAVE_AREA
  /* If setjmp restores regs from a save area in the stack frame,
     avoid clobbering the reg save area.  Note that the offset of
     virtual_incoming_args_rtx includes the preallocated stack args space.
     It would be no problem to clobber that, but it's on the wrong side
     of the old save area.  */
  {
    rtx dynamic_offset
      = expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx,
                      stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN);

    if (!current_function_calls_setjmp)
      {
        int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;

        /* See optimize_save_area_alloca to understand what is being
           set up here.  */

#if !defined(PREFERRED_STACK_BOUNDARY) || !defined(MUST_ALIGN) || (PREFERRED_STACK_BOUNDARY != BIGGEST_ALIGNMENT)
        /* If anyone creates a target with these characteristics, let them
           know that our optimization cannot work correctly in such a case.  */
        abort();
#endif

        if (GET_CODE (size) == CONST_INT)
          {
            int new = INTVAL (size) / align * align;

            if (INTVAL (size) != new)
              setjmpless_size = GEN_INT (new);
            else
              setjmpless_size = size;
          }
        else
          {
            /* Since we know overflow is not possible, we avoid using
               CEIL_DIV_EXPR and use TRUNC_DIV_EXPR instead.  */
            setjmpless_size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size,
                                             GEN_INT (align), NULL_RTX, 1);
            setjmpless_size = expand_mult (Pmode, setjmpless_size,
                                           GEN_INT (align), NULL_RTX, 1);
          }
        /* Our optimization works based upon being able to perform a simple
           transformation of this RTL into a (set REG REG) so make sure things
           did in fact end up in a REG.  */
        if (!register_operand (setjmpless_size, Pmode))
          setjmpless_size = force_reg (Pmode, setjmpless_size);
      }

    size = expand_binop (Pmode, add_optab, size, dynamic_offset,
                         NULL_RTX, 1, OPTAB_LIB_WIDEN);
  }
#endif /* SETJMP_VIA_SAVE_AREA */

  /* Round the size to a multiple of the required stack alignment.
     Since the stack if presumed to be rounded before this allocation,
     this will maintain the required alignment.

     If the stack grows downward, we could save an insn by subtracting
     SIZE from the stack pointer and then aligning the stack pointer.
     The problem with this is that the stack pointer may be unaligned
     between the execution of the subtraction and alignment insns and
     some machines do not allow this.  Even on those that do, some
     signal handlers malfunction if a signal should occur between those
     insns.  Since this is an extremely rare event, we have no reliable
     way of knowing which systems have this problem.  So we avoid even
     momentarily mis-aligning the stack.  */

#ifdef PREFERRED_STACK_BOUNDARY
  /* If we added a variable amount to SIZE,
     we can no longer assume it is aligned.  */
#if !defined (SETJMP_VIA_SAVE_AREA)
  if (MUST_ALIGN || known_align % PREFERRED_STACK_BOUNDARY != 0)
#endif
    size = round_push (size);
#endif

  do_pending_stack_adjust ();

 /* We ought to be called always on the toplevel and stack ought to be aligned
    propertly.  */
#ifdef PREFERRED_STACK_BOUNDARY
  if (stack_pointer_delta % (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT))
    abort ();
#endif

  /* If needed, check that we have the required amount of stack.  Take into
     account what has already been checked.  */
  if (flag_stack_check && ! STACK_CHECK_BUILTIN)
    probe_stack_range (STACK_CHECK_MAX_FRAME_SIZE + STACK_CHECK_PROTECT, size);

  /* Don't use a TARGET that isn't a pseudo.  */
  if (target == 0 || GET_CODE (target) != REG
      || REGNO (target) < FIRST_PSEUDO_REGISTER)
    target = gen_reg_rtx (Pmode);

  mark_reg_pointer (target, known_align);

  /* Perform the required allocation from the stack.  Some systems do
     this differently than simply incrementing/decrementing from the
     stack pointer, such as acquiring the space by calling malloc().  */
#ifdef HAVE_allocate_stack
  if (HAVE_allocate_stack)
    {
      enum machine_mode mode = STACK_SIZE_MODE;
      insn_operand_predicate_fn pred;

      pred = insn_data[(int) CODE_FOR_allocate_stack].operand[0].predicate;
      if (pred && ! ((*pred) (target, Pmode)))
#ifdef POINTERS_EXTEND_UNSIGNED
        target = convert_memory_address (Pmode, target);
#else
        target = copy_to_mode_reg (Pmode, target);
#endif

      if (mode == VOIDmode)
        mode = Pmode;

      size = convert_modes (mode, ptr_mode, size, 1);
      pred = insn_data[(int) CODE_FOR_allocate_stack].operand[1].predicate;
      if (pred && ! ((*pred) (size, mode)))
        size = copy_to_mode_reg (mode, size);

      emit_insn (gen_allocate_stack (target, size));
    }
  else
#endif
    {
#ifndef STACK_GROWS_DOWNWARD
      emit_move_insn (target, virtual_stack_dynamic_rtx);
#endif
      size = convert_modes (Pmode, ptr_mode, size, 1);

      /* Check stack bounds if necessary.  */
      if (current_function_limit_stack)
        {
          rtx available;
          rtx space_available = gen_label_rtx ();
#ifdef STACK_GROWS_DOWNWARD
          available = expand_binop (Pmode, sub_optab, 
                                    stack_pointer_rtx, stack_limit_rtx,
                                    NULL_RTX, 1, OPTAB_WIDEN);
#else
          available = expand_binop (Pmode, sub_optab, 
                                    stack_limit_rtx, stack_pointer_rtx,
                                    NULL_RTX, 1, OPTAB_WIDEN);
#endif
          emit_cmp_and_jump_insns (available, size, GEU, NULL_RTX, Pmode, 1,
                                   0, space_available);
#ifdef HAVE_trap
          if (HAVE_trap)
            emit_insn (gen_trap ());
          else
#endif
            error ("stack limits not supported on this target");
          emit_barrier ();
          emit_label (space_available);
        }

      anti_adjust_stack (size);
#ifdef SETJMP_VIA_SAVE_AREA
      if (setjmpless_size != NULL_RTX)
        {
          rtx note_target = get_last_insn ();

          REG_NOTES (note_target)
            = gen_rtx_EXPR_LIST (REG_SAVE_AREA, setjmpless_size,
                                 REG_NOTES (note_target));
        }
#endif /* SETJMP_VIA_SAVE_AREA */
#ifdef STACK_GROWS_DOWNWARD
  emit_move_insn (target, virtual_stack_dynamic_rtx);
#endif
    }

  if (MUST_ALIGN)
    {
      /* CEIL_DIV_EXPR needs to worry about the addition overflowing,
         but we know it can't.  So add ourselves and then do
         TRUNC_DIV_EXPR.  */
      target = expand_binop (Pmode, add_optab, target,
                             GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1),
                             NULL_RTX, 1, OPTAB_LIB_WIDEN);
      target = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, target,
                              GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT),
                              NULL_RTX, 1);
      target = expand_mult (Pmode, target,
                            GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT),
                            NULL_RTX, 1);
    }
  
  /* Some systems require a particular insn to refer to the stack
     to make the pages exist.  */
#ifdef HAVE_probe
  if (HAVE_probe)
    emit_insn (gen_probe ());
#endif

  /* Record the new stack level for nonlocal gotos.  */
  if (nonlocal_goto_handler_slots != 0)
    emit_stack_save (SAVE_NONLOCAL, &nonlocal_goto_stack_level, NULL_RTX);

  return target;
}
\f
/* A front end may want to override GCC's stack checking by providing a 
   run-time routine to call to check the stack, so provide a mechanism for
   calling that routine.  */

static rtx stack_check_libfunc;

void
set_stack_check_libfunc (libfunc)
     rtx libfunc;
{
  stack_check_libfunc = libfunc;
}
\f
/* Emit one stack probe at ADDRESS, an address within the stack.  */

static void
emit_stack_probe (address)
     rtx address;
{
  rtx memref = gen_rtx_MEM (word_mode, address);

  MEM_VOLATILE_P (memref) = 1;

  if (STACK_CHECK_PROBE_LOAD)
    emit_move_insn (gen_reg_rtx (word_mode), memref);
  else
    emit_move_insn (memref, const0_rtx);
}

/* Probe a range of stack addresses from FIRST to FIRST+SIZE, inclusive. 
   FIRST is a constant and size is a Pmode RTX.  These are offsets from the
   current stack pointer.  STACK_GROWS_DOWNWARD says whether to add or
   subtract from the stack.  If SIZE is constant, this is done
   with a fixed number of probes.  Otherwise, we must make a loop.  */

#ifdef STACK_GROWS_DOWNWARD
#define STACK_GROW_OP MINUS
#else
#define STACK_GROW_OP PLUS
#endif

void
probe_stack_range (first, size)
     HOST_WIDE_INT first;
     rtx size;
{
  /* First see if the front end has set up a function for us to call to
     check the stack.  */
  if (stack_check_libfunc != 0)
    emit_library_call (stack_check_libfunc, 0, VOIDmode, 1,
                       memory_address (QImode,
                                       gen_rtx (STACK_GROW_OP, Pmode,
                                                stack_pointer_rtx,
                                                plus_constant (size, first))),
                       ptr_mode);

  /* Next see if we have an insn to check the stack.  Use it if so.  */
#ifdef HAVE_check_stack
  else if (HAVE_check_stack)
    {
      insn_operand_predicate_fn pred;
      rtx last_addr
        = force_operand (gen_rtx_STACK_GROW_OP (Pmode,
                                                stack_pointer_rtx,
                                                plus_constant (size, first)),
                         NULL_RTX);

      pred = insn_data[(int) CODE_FOR_check_stack].operand[0].predicate;
      if (pred && ! ((*pred) (last_addr, Pmode)))
        last_addr = copy_to_mode_reg (Pmode, last_addr);

      emit_insn (gen_check_stack (last_addr));
    }
#endif

  /* If we have to generate explicit probes, see if we have a constant
     small number of them to generate.  If so, that's the easy case.  */
  else if (GET_CODE (size) == CONST_INT
           && INTVAL (size) < 10 * STACK_CHECK_PROBE_INTERVAL)
    {
      HOST_WIDE_INT offset;

      /* Start probing at FIRST + N * STACK_CHECK_PROBE_INTERVAL
         for values of N from 1 until it exceeds LAST.  If only one
         probe is needed, this will not generate any code.  Then probe
         at LAST.  */
      for (offset = first + STACK_CHECK_PROBE_INTERVAL;
           offset < INTVAL (size);
           offset = offset + STACK_CHECK_PROBE_INTERVAL)
        emit_stack_probe (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode,
                                          stack_pointer_rtx,
                                          GEN_INT (offset)));

      emit_stack_probe (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode,
                                        stack_pointer_rtx,
                                        plus_constant (size, first)));
    }

  /* In the variable case, do the same as above, but in a loop.  We emit loop
     notes so that loop optimization can be done.  */
  else
    {
      rtx test_addr
        = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode,
                                         stack_pointer_rtx,
                                         GEN_INT (first + STACK_CHECK_PROBE_INTERVAL)),
                         NULL_RTX);
      rtx last_addr
        = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode,
                                         stack_pointer_rtx,
                                         plus_constant (size, first)),
                         NULL_RTX);
      rtx incr = GEN_INT (STACK_CHECK_PROBE_INTERVAL);
      rtx loop_lab = gen_label_rtx ();
      rtx test_lab = gen_label_rtx ();
      rtx end_lab = gen_label_rtx ();
      rtx temp;

      if (GET_CODE (test_addr) != REG
          || REGNO (test_addr) < FIRST_PSEUDO_REGISTER)
        test_addr = force_reg (Pmode, test_addr);

      emit_note (NULL_PTR, NOTE_INSN_LOOP_BEG);
      emit_jump (test_lab);

      emit_label (loop_lab);
      emit_stack_probe (test_addr);

      emit_note (NULL_PTR, NOTE_INSN_LOOP_CONT);

#ifdef STACK_GROWS_DOWNWARD
#define CMP_OPCODE GTU
      temp = expand_binop (Pmode, sub_optab, test_addr, incr, test_addr,
                           1, OPTAB_WIDEN);
#else
#define CMP_OPCODE LTU
      temp = expand_binop (Pmode, add_optab, test_addr, incr, test_addr,
                           1, OPTAB_WIDEN);
#endif

      if (temp != test_addr)
        abort ();

      emit_label (test_lab);
      emit_cmp_and_jump_insns (test_addr, last_addr, CMP_OPCODE,
                               NULL_RTX, Pmode, 1, 0, loop_lab);
      emit_jump (end_lab);
      emit_note (NULL_PTR, NOTE_INSN_LOOP_END);
      emit_label (end_lab);

      emit_stack_probe (last_addr);
    }
}
\f
/* Return an rtx representing the register or memory location
   in which a scalar value of data type VALTYPE
   was returned by a function call to function FUNC.
   FUNC is a FUNCTION_DECL node if the precise function is known,
   otherwise 0.
   OUTGOING is 1 if on a machine with register windows this function
   should return the register in which the function will put its result
   and 0 otherwise. */

rtx
hard_function_value (valtype, func, outgoing)
     tree valtype;
     tree func ATTRIBUTE_UNUSED;
     int outgoing ATTRIBUTE_UNUSED;
{
  rtx val;

#ifdef FUNCTION_OUTGOING_VALUE
  if (outgoing)
    val = FUNCTION_OUTGOING_VALUE (valtype, func);
  else
#endif
    val = FUNCTION_VALUE (valtype, func);

  if (GET_CODE (val) == REG
      && GET_MODE (val) == BLKmode)
    {
      unsigned HOST_WIDE_INT bytes = int_size_in_bytes (valtype);
      enum machine_mode tmpmode;

      for (tmpmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
           tmpmode != VOIDmode;
           tmpmode = GET_MODE_WIDER_MODE (tmpmode))
        {
          /* Have we found a large enough mode?  */
          if (GET_MODE_SIZE (tmpmode) >= bytes)
            break;
        }

      /* No suitable mode found.  */
      if (tmpmode == VOIDmode)
        abort ();

      PUT_MODE (val, tmpmode);
    }      
  return val;
}

/* Return an rtx representing the register or memory location
   in which a scalar value of mode MODE was returned by a library call.  */

rtx
hard_libcall_value (mode)
     enum machine_mode mode;
{
  return LIBCALL_VALUE (mode);
}

/* Look up the tree code for a given rtx code
   to provide the arithmetic operation for REAL_ARITHMETIC.
   The function returns an int because the caller may not know
   what `enum tree_code' means.  */

int
rtx_to_tree_code (code)
     enum rtx_code code;
{
  enum tree_code tcode;

  switch (code)
    {
    case PLUS:
      tcode = PLUS_EXPR;
      break;
    case MINUS:
      tcode = MINUS_EXPR;
      break;
    case MULT:
      tcode = MULT_EXPR;
      break;
    case DIV:
      tcode = RDIV_EXPR;
      break;
    case SMIN:
      tcode = MIN_EXPR;
      break;
    case SMAX:
      tcode = MAX_EXPR;
      break;
    default:
      tcode = LAST_AND_UNUSED_TREE_CODE;
      break;
    }
  return ((int) tcode);
}