1 /* Emit RTL for the GCC expander.
2 Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify it under
8 the terms of the GNU General Public License as published by the Free
9 Software Foundation; either version 2, or (at your option) any later
12 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
13 WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 You should have received a copy of the GNU General Public License
18 along with GCC; see the file COPYING. If not, write to the Free
19 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
23 /* Middle-to-low level generation of rtx code and insns.
25 This file contains support functions for creating rtl expressions
26 and manipulating them in the doubly-linked chain of insns.
28 The patterns of the insns are created by machine-dependent
29 routines in insn-emit.c, which is generated automatically from
30 the machine description. These routines make the individual rtx's
31 of the pattern with `gen_rtx_fmt_ee' and others in genrtl.[ch],
32 which are automatically generated from rtl.def; what is machine
33 dependent is the kind of rtx's they make and what arguments they
38 #include "coretypes.h"
48 #include "hard-reg-set.h"
50 #include "insn-config.h"
54 #include "basic-block.h"
57 #include "langhooks.h"
59 /* Commonly used modes. */
61 enum machine_mode byte_mode; /* Mode whose width is BITS_PER_UNIT. */
62 enum machine_mode word_mode; /* Mode whose width is BITS_PER_WORD. */
63 enum machine_mode double_mode; /* Mode whose width is DOUBLE_TYPE_SIZE. */
64 enum machine_mode ptr_mode; /* Mode whose width is POINTER_SIZE. */
67 /* This is *not* reset after each function. It gives each CODE_LABEL
68 in the entire compilation a unique label number. */
70 static GTY(()) int label_num = 1;
72 /* Nonzero means do not generate NOTEs for source line numbers. */
74 static int no_line_numbers;
76 /* Commonly used rtx's, so that we only need space for one copy.
77 These are initialized once for the entire compilation.
78 All of these are unique; no other rtx-object will be equal to any
81 rtx global_rtl[GR_MAX];
83 /* Commonly used RTL for hard registers. These objects are not necessarily
84 unique, so we allocate them separately from global_rtl. They are
85 initialized once per compilation unit, then copied into regno_reg_rtx
86 at the beginning of each function. */
87 static GTY(()) rtx static_regno_reg_rtx[FIRST_PSEUDO_REGISTER];
89 /* We record floating-point CONST_DOUBLEs in each floating-point mode for
90 the values of 0, 1, and 2. For the integer entries and VOIDmode, we
91 record a copy of const[012]_rtx. */
93 rtx const_tiny_rtx[3][(int) MAX_MACHINE_MODE];
97 REAL_VALUE_TYPE dconst0;
98 REAL_VALUE_TYPE dconst1;
99 REAL_VALUE_TYPE dconst2;
100 REAL_VALUE_TYPE dconst3;
101 REAL_VALUE_TYPE dconst10;
102 REAL_VALUE_TYPE dconstm1;
103 REAL_VALUE_TYPE dconstm2;
104 REAL_VALUE_TYPE dconsthalf;
105 REAL_VALUE_TYPE dconstthird;
106 REAL_VALUE_TYPE dconstpi;
107 REAL_VALUE_TYPE dconste;
109 /* All references to the following fixed hard registers go through
110 these unique rtl objects. On machines where the frame-pointer and
111 arg-pointer are the same register, they use the same unique object.
113 After register allocation, other rtl objects which used to be pseudo-regs
114 may be clobbered to refer to the frame-pointer register.
115 But references that were originally to the frame-pointer can be
116 distinguished from the others because they contain frame_pointer_rtx.
118 When to use frame_pointer_rtx and hard_frame_pointer_rtx is a little
119 tricky: until register elimination has taken place hard_frame_pointer_rtx
120 should be used if it is being set, and frame_pointer_rtx otherwise. After
121 register elimination hard_frame_pointer_rtx should always be used.
122 On machines where the two registers are same (most) then these are the
125 In an inline procedure, the stack and frame pointer rtxs may not be
126 used for anything else. */
127 rtx static_chain_rtx; /* (REG:Pmode STATIC_CHAIN_REGNUM) */
128 rtx static_chain_incoming_rtx; /* (REG:Pmode STATIC_CHAIN_INCOMING_REGNUM) */
129 rtx pic_offset_table_rtx; /* (REG:Pmode PIC_OFFSET_TABLE_REGNUM) */
131 /* This is used to implement __builtin_return_address for some machines.
132 See for instance the MIPS port. */
133 rtx return_address_pointer_rtx; /* (REG:Pmode RETURN_ADDRESS_POINTER_REGNUM) */
135 /* We make one copy of (const_int C) where C is in
136 [- MAX_SAVED_CONST_INT, MAX_SAVED_CONST_INT]
137 to save space during the compilation and simplify comparisons of
140 rtx const_int_rtx[MAX_SAVED_CONST_INT * 2 + 1];
142 /* A hash table storing CONST_INTs whose absolute value is greater
143 than MAX_SAVED_CONST_INT. */
145 static GTY ((if_marked ("ggc_marked_p"), param_is (struct rtx_def)))
146 htab_t const_int_htab;
148 /* A hash table storing memory attribute structures. */
149 static GTY ((if_marked ("ggc_marked_p"), param_is (struct mem_attrs)))
150 htab_t mem_attrs_htab;
152 /* A hash table storing register attribute structures. */
153 static GTY ((if_marked ("ggc_marked_p"), param_is (struct reg_attrs)))
154 htab_t reg_attrs_htab;
156 /* A hash table storing all CONST_DOUBLEs. */
157 static GTY ((if_marked ("ggc_marked_p"), param_is (struct rtx_def)))
158 htab_t const_double_htab;
160 #define first_insn (cfun->emit->x_first_insn)
161 #define last_insn (cfun->emit->x_last_insn)
162 #define cur_insn_uid (cfun->emit->x_cur_insn_uid)
163 #define last_location (cfun->emit->x_last_location)
164 #define first_label_num (cfun->emit->x_first_label_num)
166 static rtx make_jump_insn_raw (rtx);
167 static rtx make_call_insn_raw (rtx);
168 static rtx find_line_note (rtx);
169 static rtx change_address_1 (rtx, enum machine_mode, rtx, int);
170 static void unshare_all_decls (tree);
171 static void reset_used_decls (tree);
172 static void mark_label_nuses (rtx);
173 static hashval_t const_int_htab_hash (const void *);
174 static int const_int_htab_eq (const void *, const void *);
175 static hashval_t const_double_htab_hash (const void *);
176 static int const_double_htab_eq (const void *, const void *);
177 static rtx lookup_const_double (rtx);
178 static hashval_t mem_attrs_htab_hash (const void *);
179 static int mem_attrs_htab_eq (const void *, const void *);
180 static mem_attrs *get_mem_attrs (HOST_WIDE_INT, tree, rtx, rtx, unsigned int,
182 static hashval_t reg_attrs_htab_hash (const void *);
183 static int reg_attrs_htab_eq (const void *, const void *);
184 static reg_attrs *get_reg_attrs (tree, int);
185 static tree component_ref_for_mem_expr (tree);
186 static rtx gen_const_vector (enum machine_mode, int);
187 static rtx gen_complex_constant_part (enum machine_mode, rtx, int);
188 static void copy_rtx_if_shared_1 (rtx *orig);
190 /* Probability of the conditional branch currently proceeded by try_split.
191 Set to -1 otherwise. */
192 int split_branch_probability = -1;
194 /* Returns a hash code for X (which is a really a CONST_INT). */
197 const_int_htab_hash (const void *x)
199 return (hashval_t) INTVAL ((rtx) x);
202 /* Returns nonzero if the value represented by X (which is really a
203 CONST_INT) is the same as that given by Y (which is really a
207 const_int_htab_eq (const void *x, const void *y)
209 return (INTVAL ((rtx) x) == *((const HOST_WIDE_INT *) y));
212 /* Returns a hash code for X (which is really a CONST_DOUBLE). */
214 const_double_htab_hash (const void *x)
219 if (GET_MODE (value) == VOIDmode)
220 h = CONST_DOUBLE_LOW (value) ^ CONST_DOUBLE_HIGH (value);
223 h = real_hash (CONST_DOUBLE_REAL_VALUE (value));
224 /* MODE is used in the comparison, so it should be in the hash. */
225 h ^= GET_MODE (value);
230 /* Returns nonzero if the value represented by X (really a ...)
231 is the same as that represented by Y (really a ...) */
233 const_double_htab_eq (const void *x, const void *y)
235 rtx a = (rtx)x, b = (rtx)y;
237 if (GET_MODE (a) != GET_MODE (b))
239 if (GET_MODE (a) == VOIDmode)
240 return (CONST_DOUBLE_LOW (a) == CONST_DOUBLE_LOW (b)
241 && CONST_DOUBLE_HIGH (a) == CONST_DOUBLE_HIGH (b));
243 return real_identical (CONST_DOUBLE_REAL_VALUE (a),
244 CONST_DOUBLE_REAL_VALUE (b));
247 /* Returns a hash code for X (which is a really a mem_attrs *). */
250 mem_attrs_htab_hash (const void *x)
252 mem_attrs *p = (mem_attrs *) x;
254 return (p->alias ^ (p->align * 1000)
255 ^ ((p->offset ? INTVAL (p->offset) : 0) * 50000)
256 ^ ((p->size ? INTVAL (p->size) : 0) * 2500000)
260 /* Returns nonzero if the value represented by X (which is really a
261 mem_attrs *) is the same as that given by Y (which is also really a
265 mem_attrs_htab_eq (const void *x, const void *y)
267 mem_attrs *p = (mem_attrs *) x;
268 mem_attrs *q = (mem_attrs *) y;
270 return (p->alias == q->alias && p->expr == q->expr && p->offset == q->offset
271 && p->size == q->size && p->align == q->align);
274 /* Allocate a new mem_attrs structure and insert it into the hash table if
275 one identical to it is not already in the table. We are doing this for
279 get_mem_attrs (HOST_WIDE_INT alias, tree expr, rtx offset, rtx size,
280 unsigned int align, enum machine_mode mode)
285 /* If everything is the default, we can just return zero.
286 This must match what the corresponding MEM_* macros return when the
287 field is not present. */
288 if (alias == 0 && expr == 0 && offset == 0
290 || (mode != BLKmode && GET_MODE_SIZE (mode) == INTVAL (size)))
291 && (STRICT_ALIGNMENT && mode != BLKmode
292 ? align == GET_MODE_ALIGNMENT (mode) : align == BITS_PER_UNIT))
297 attrs.offset = offset;
301 slot = htab_find_slot (mem_attrs_htab, &attrs, INSERT);
304 *slot = ggc_alloc (sizeof (mem_attrs));
305 memcpy (*slot, &attrs, sizeof (mem_attrs));
311 /* Returns a hash code for X (which is a really a reg_attrs *). */
314 reg_attrs_htab_hash (const void *x)
316 reg_attrs *p = (reg_attrs *) x;
318 return ((p->offset * 1000) ^ (long) p->decl);
321 /* Returns nonzero if the value represented by X (which is really a
322 reg_attrs *) is the same as that given by Y (which is also really a
326 reg_attrs_htab_eq (const void *x, const void *y)
328 reg_attrs *p = (reg_attrs *) x;
329 reg_attrs *q = (reg_attrs *) y;
331 return (p->decl == q->decl && p->offset == q->offset);
333 /* Allocate a new reg_attrs structure and insert it into the hash table if
334 one identical to it is not already in the table. We are doing this for
338 get_reg_attrs (tree decl, int offset)
343 /* If everything is the default, we can just return zero. */
344 if (decl == 0 && offset == 0)
348 attrs.offset = offset;
350 slot = htab_find_slot (reg_attrs_htab, &attrs, INSERT);
353 *slot = ggc_alloc (sizeof (reg_attrs));
354 memcpy (*slot, &attrs, sizeof (reg_attrs));
360 /* Generate a new REG rtx. Make sure ORIGINAL_REGNO is set properly, and
361 don't attempt to share with the various global pieces of rtl (such as
362 frame_pointer_rtx). */
365 gen_raw_REG (enum machine_mode mode, int regno)
367 rtx x = gen_rtx_raw_REG (mode, regno);
368 ORIGINAL_REGNO (x) = regno;
372 /* There are some RTL codes that require special attention; the generation
373 functions do the raw handling. If you add to this list, modify
374 special_rtx in gengenrtl.c as well. */
377 gen_rtx_CONST_INT (enum machine_mode mode ATTRIBUTE_UNUSED, HOST_WIDE_INT arg)
381 if (arg >= - MAX_SAVED_CONST_INT && arg <= MAX_SAVED_CONST_INT)
382 return const_int_rtx[arg + MAX_SAVED_CONST_INT];
384 #if STORE_FLAG_VALUE != 1 && STORE_FLAG_VALUE != -1
385 if (const_true_rtx && arg == STORE_FLAG_VALUE)
386 return const_true_rtx;
389 /* Look up the CONST_INT in the hash table. */
390 slot = htab_find_slot_with_hash (const_int_htab, &arg,
391 (hashval_t) arg, INSERT);
393 *slot = gen_rtx_raw_CONST_INT (VOIDmode, arg);
399 gen_int_mode (HOST_WIDE_INT c, enum machine_mode mode)
401 return GEN_INT (trunc_int_for_mode (c, mode));
404 /* CONST_DOUBLEs might be created from pairs of integers, or from
405 REAL_VALUE_TYPEs. Also, their length is known only at run time,
406 so we cannot use gen_rtx_raw_CONST_DOUBLE. */
408 /* Determine whether REAL, a CONST_DOUBLE, already exists in the
409 hash table. If so, return its counterpart; otherwise add it
410 to the hash table and return it. */
412 lookup_const_double (rtx real)
414 void **slot = htab_find_slot (const_double_htab, real, INSERT);
421 /* Return a CONST_DOUBLE rtx for a floating-point value specified by
422 VALUE in mode MODE. */
424 const_double_from_real_value (REAL_VALUE_TYPE value, enum machine_mode mode)
426 rtx real = rtx_alloc (CONST_DOUBLE);
427 PUT_MODE (real, mode);
429 memcpy (&CONST_DOUBLE_LOW (real), &value, sizeof (REAL_VALUE_TYPE));
431 return lookup_const_double (real);
434 /* Return a CONST_DOUBLE or CONST_INT for a value specified as a pair
435 of ints: I0 is the low-order word and I1 is the high-order word.
436 Do not use this routine for non-integer modes; convert to
437 REAL_VALUE_TYPE and use CONST_DOUBLE_FROM_REAL_VALUE. */
440 immed_double_const (HOST_WIDE_INT i0, HOST_WIDE_INT i1, enum machine_mode mode)
445 if (mode != VOIDmode)
449 gcc_assert (GET_MODE_CLASS (mode) == MODE_INT
450 || GET_MODE_CLASS (mode) == MODE_PARTIAL_INT
451 /* We can get a 0 for an error mark. */
452 || GET_MODE_CLASS (mode) == MODE_VECTOR_INT
453 || GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT);
455 /* We clear out all bits that don't belong in MODE, unless they and
456 our sign bit are all one. So we get either a reasonable negative
457 value or a reasonable unsigned value for this mode. */
458 width = GET_MODE_BITSIZE (mode);
459 if (width < HOST_BITS_PER_WIDE_INT
460 && ((i0 & ((HOST_WIDE_INT) (-1) << (width - 1)))
461 != ((HOST_WIDE_INT) (-1) << (width - 1))))
462 i0 &= ((HOST_WIDE_INT) 1 << width) - 1, i1 = 0;
463 else if (width == HOST_BITS_PER_WIDE_INT
464 && ! (i1 == ~0 && i0 < 0))
467 /* We should be able to represent this value as a constant. */
468 gcc_assert (width <= 2 * HOST_BITS_PER_WIDE_INT);
470 /* If this would be an entire word for the target, but is not for
471 the host, then sign-extend on the host so that the number will
472 look the same way on the host that it would on the target.
474 For example, when building a 64 bit alpha hosted 32 bit sparc
475 targeted compiler, then we want the 32 bit unsigned value -1 to be
476 represented as a 64 bit value -1, and not as 0x00000000ffffffff.
477 The latter confuses the sparc backend. */
479 if (width < HOST_BITS_PER_WIDE_INT
480 && (i0 & ((HOST_WIDE_INT) 1 << (width - 1))))
481 i0 |= ((HOST_WIDE_INT) (-1) << width);
483 /* If MODE fits within HOST_BITS_PER_WIDE_INT, always use a
486 ??? Strictly speaking, this is wrong if we create a CONST_INT for
487 a large unsigned constant with the size of MODE being
488 HOST_BITS_PER_WIDE_INT and later try to interpret that constant
489 in a wider mode. In that case we will mis-interpret it as a
492 Unfortunately, the only alternative is to make a CONST_DOUBLE for
493 any constant in any mode if it is an unsigned constant larger
494 than the maximum signed integer in an int on the host. However,
495 doing this will break everyone that always expects to see a
496 CONST_INT for SImode and smaller.
498 We have always been making CONST_INTs in this case, so nothing
499 new is being broken. */
501 if (width <= HOST_BITS_PER_WIDE_INT)
502 i1 = (i0 < 0) ? ~(HOST_WIDE_INT) 0 : 0;
505 /* If this integer fits in one word, return a CONST_INT. */
506 if ((i1 == 0 && i0 >= 0) || (i1 == ~0 && i0 < 0))
509 /* We use VOIDmode for integers. */
510 value = rtx_alloc (CONST_DOUBLE);
511 PUT_MODE (value, VOIDmode);
513 CONST_DOUBLE_LOW (value) = i0;
514 CONST_DOUBLE_HIGH (value) = i1;
516 for (i = 2; i < (sizeof CONST_DOUBLE_FORMAT - 1); i++)
517 XWINT (value, i) = 0;
519 return lookup_const_double (value);
523 gen_rtx_REG (enum machine_mode mode, unsigned int regno)
525 /* In case the MD file explicitly references the frame pointer, have
526 all such references point to the same frame pointer. This is
527 used during frame pointer elimination to distinguish the explicit
528 references to these registers from pseudos that happened to be
531 If we have eliminated the frame pointer or arg pointer, we will
532 be using it as a normal register, for example as a spill
533 register. In such cases, we might be accessing it in a mode that
534 is not Pmode and therefore cannot use the pre-allocated rtx.
536 Also don't do this when we are making new REGs in reload, since
537 we don't want to get confused with the real pointers. */
539 if (mode == Pmode && !reload_in_progress)
541 if (regno == FRAME_POINTER_REGNUM
542 && (!reload_completed || frame_pointer_needed))
543 return frame_pointer_rtx;
544 #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
545 if (regno == HARD_FRAME_POINTER_REGNUM
546 && (!reload_completed || frame_pointer_needed))
547 return hard_frame_pointer_rtx;
549 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM && HARD_FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
550 if (regno == ARG_POINTER_REGNUM)
551 return arg_pointer_rtx;
553 #ifdef RETURN_ADDRESS_POINTER_REGNUM
554 if (regno == RETURN_ADDRESS_POINTER_REGNUM)
555 return return_address_pointer_rtx;
557 if (regno == (unsigned) PIC_OFFSET_TABLE_REGNUM
558 && fixed_regs[PIC_OFFSET_TABLE_REGNUM])
559 return pic_offset_table_rtx;
560 if (regno == STACK_POINTER_REGNUM)
561 return stack_pointer_rtx;
565 /* If the per-function register table has been set up, try to re-use
566 an existing entry in that table to avoid useless generation of RTL.
568 This code is disabled for now until we can fix the various backends
569 which depend on having non-shared hard registers in some cases. Long
570 term we want to re-enable this code as it can significantly cut down
571 on the amount of useless RTL that gets generated.
573 We'll also need to fix some code that runs after reload that wants to
574 set ORIGINAL_REGNO. */
579 && regno < FIRST_PSEUDO_REGISTER
580 && reg_raw_mode[regno] == mode)
581 return regno_reg_rtx[regno];
584 return gen_raw_REG (mode, regno);
588 gen_rtx_MEM (enum machine_mode mode, rtx addr)
590 rtx rt = gen_rtx_raw_MEM (mode, addr);
592 /* This field is not cleared by the mere allocation of the rtx, so
599 /* Generate a memory referring to non-trapping constant memory. */
602 gen_const_mem (enum machine_mode mode, rtx addr)
604 rtx mem = gen_rtx_MEM (mode, addr);
605 MEM_READONLY_P (mem) = 1;
606 MEM_NOTRAP_P (mem) = 1;
610 /* We want to create (subreg:OMODE (obj:IMODE) OFFSET). Return true if
611 this construct would be valid, and false otherwise. */
614 validate_subreg (enum machine_mode omode, enum machine_mode imode,
615 rtx reg, unsigned int offset)
617 unsigned int isize = GET_MODE_SIZE (imode);
618 unsigned int osize = GET_MODE_SIZE (omode);
620 /* All subregs must be aligned. */
621 if (offset % osize != 0)
624 /* The subreg offset cannot be outside the inner object. */
628 /* ??? This should not be here. Temporarily continue to allow word_mode
629 subregs of anything. The most common offender is (subreg:SI (reg:DF)).
630 Generally, backends are doing something sketchy but it'll take time to
632 if (omode == word_mode)
634 /* ??? Similarly, e.g. with (subreg:DF (reg:TI)). Though store_bit_field
635 is the culprit here, and not the backends. */
636 else if (osize >= UNITS_PER_WORD && isize >= osize)
638 /* Allow component subregs of complex and vector. Though given the below
639 extraction rules, it's not always clear what that means. */
640 else if ((COMPLEX_MODE_P (imode) || VECTOR_MODE_P (imode))
641 && GET_MODE_INNER (imode) == omode)
643 /* ??? x86 sse code makes heavy use of *paradoxical* vector subregs,
644 i.e. (subreg:V4SF (reg:SF) 0). This surely isn't the cleanest way to
645 represent this. It's questionable if this ought to be represented at
646 all -- why can't this all be hidden in post-reload splitters that make
647 arbitrarily mode changes to the registers themselves. */
648 else if (VECTOR_MODE_P (omode) && GET_MODE_INNER (omode) == imode)
650 /* Subregs involving floating point modes are not allowed to
651 change size. Therefore (subreg:DI (reg:DF) 0) is fine, but
652 (subreg:SI (reg:DF) 0) isn't. */
653 else if (FLOAT_MODE_P (imode) || FLOAT_MODE_P (omode))
659 /* Paradoxical subregs must have offset zero. */
663 /* This is a normal subreg. Verify that the offset is representable. */
665 /* For hard registers, we already have most of these rules collected in
666 subreg_offset_representable_p. */
667 if (reg && REG_P (reg) && HARD_REGISTER_P (reg))
669 unsigned int regno = REGNO (reg);
671 #ifdef CANNOT_CHANGE_MODE_CLASS
672 if ((COMPLEX_MODE_P (imode) || VECTOR_MODE_P (imode))
673 && GET_MODE_INNER (imode) == omode)
675 else if (REG_CANNOT_CHANGE_MODE_P (regno, imode, omode))
679 return subreg_offset_representable_p (regno, imode, offset, omode);
682 /* For pseudo registers, we want most of the same checks. Namely:
683 If the register no larger than a word, the subreg must be lowpart.
684 If the register is larger than a word, the subreg must be the lowpart
685 of a subword. A subreg does *not* perform arbitrary bit extraction.
686 Given that we've already checked mode/offset alignment, we only have
687 to check subword subregs here. */
688 if (osize < UNITS_PER_WORD)
690 enum machine_mode wmode = isize > UNITS_PER_WORD ? word_mode : imode;
691 unsigned int low_off = subreg_lowpart_offset (omode, wmode);
692 if (offset % UNITS_PER_WORD != low_off)
699 gen_rtx_SUBREG (enum machine_mode mode, rtx reg, int offset)
701 gcc_assert (validate_subreg (mode, GET_MODE (reg), reg, offset));
702 return gen_rtx_raw_SUBREG (mode, reg, offset);
705 /* Generate a SUBREG representing the least-significant part of REG if MODE
706 is smaller than mode of REG, otherwise paradoxical SUBREG. */
709 gen_lowpart_SUBREG (enum machine_mode mode, rtx reg)
711 enum machine_mode inmode;
713 inmode = GET_MODE (reg);
714 if (inmode == VOIDmode)
716 return gen_rtx_SUBREG (mode, reg,
717 subreg_lowpart_offset (mode, inmode));
720 /* gen_rtvec (n, [rt1, ..., rtn])
722 ** This routine creates an rtvec and stores within it the
723 ** pointers to rtx's which are its arguments.
728 gen_rtvec (int n, ...)
737 return NULL_RTVEC; /* Don't allocate an empty rtvec... */
739 vector = alloca (n * sizeof (rtx));
741 for (i = 0; i < n; i++)
742 vector[i] = va_arg (p, rtx);
744 /* The definition of VA_* in K&R C causes `n' to go out of scope. */
748 return gen_rtvec_v (save_n, vector);
752 gen_rtvec_v (int n, rtx *argp)
758 return NULL_RTVEC; /* Don't allocate an empty rtvec... */
760 rt_val = rtvec_alloc (n); /* Allocate an rtvec... */
762 for (i = 0; i < n; i++)
763 rt_val->elem[i] = *argp++;
768 /* Generate a REG rtx for a new pseudo register of mode MODE.
769 This pseudo is assigned the next sequential register number. */
772 gen_reg_rtx (enum machine_mode mode)
774 struct function *f = cfun;
777 /* Don't let anything called after initial flow analysis create new
779 gcc_assert (!no_new_pseudos);
781 if (generating_concat_p
782 && (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT
783 || GET_MODE_CLASS (mode) == MODE_COMPLEX_INT))
785 /* For complex modes, don't make a single pseudo.
786 Instead, make a CONCAT of two pseudos.
787 This allows noncontiguous allocation of the real and imaginary parts,
788 which makes much better code. Besides, allocating DCmode
789 pseudos overstrains reload on some machines like the 386. */
790 rtx realpart, imagpart;
791 enum machine_mode partmode = GET_MODE_INNER (mode);
793 realpart = gen_reg_rtx (partmode);
794 imagpart = gen_reg_rtx (partmode);
795 return gen_rtx_CONCAT (mode, realpart, imagpart);
798 /* Make sure regno_pointer_align, and regno_reg_rtx are large
799 enough to have an element for this pseudo reg number. */
801 if (reg_rtx_no == f->emit->regno_pointer_align_length)
803 int old_size = f->emit->regno_pointer_align_length;
807 new = ggc_realloc (f->emit->regno_pointer_align, old_size * 2);
808 memset (new + old_size, 0, old_size);
809 f->emit->regno_pointer_align = (unsigned char *) new;
811 new1 = ggc_realloc (f->emit->x_regno_reg_rtx,
812 old_size * 2 * sizeof (rtx));
813 memset (new1 + old_size, 0, old_size * sizeof (rtx));
814 regno_reg_rtx = new1;
816 f->emit->regno_pointer_align_length = old_size * 2;
819 val = gen_raw_REG (mode, reg_rtx_no);
820 regno_reg_rtx[reg_rtx_no++] = val;
824 /* Generate a register with same attributes as REG, but offsetted by OFFSET.
825 Do the big endian correction if needed. */
828 gen_rtx_REG_offset (rtx reg, enum machine_mode mode, unsigned int regno, int offset)
830 rtx new = gen_rtx_REG (mode, regno);
832 HOST_WIDE_INT var_size;
834 /* PR middle-end/14084
835 The problem appears when a variable is stored in a larger register
836 and later it is used in the original mode or some mode in between
837 or some part of variable is accessed.
839 On little endian machines there is no problem because
840 the REG_OFFSET of the start of the variable is the same when
841 accessed in any mode (it is 0).
843 However, this is not true on big endian machines.
844 The offset of the start of the variable is different when accessed
846 When we are taking a part of the REG we have to change the OFFSET
847 from offset WRT size of mode of REG to offset WRT size of variable.
849 If we would not do the big endian correction the resulting REG_OFFSET
850 would be larger than the size of the DECL.
852 Examples of correction, for BYTES_BIG_ENDIAN WORDS_BIG_ENDIAN machine:
854 REG.mode MODE DECL size old offset new offset description
855 DI SI 4 4 0 int32 in SImode
856 DI SI 1 4 0 char in SImode
857 DI QI 1 7 0 char in QImode
858 DI QI 4 5 1 1st element in QImode
860 DI HI 4 6 2 1st element in HImode
863 If the size of DECL is equal or greater than the size of REG
864 we can't do this correction because the register holds the
865 whole variable or a part of the variable and thus the REG_OFFSET
866 is already correct. */
868 decl = REG_EXPR (reg);
869 if ((BYTES_BIG_ENDIAN || WORDS_BIG_ENDIAN)
872 && GET_MODE_SIZE (GET_MODE (reg)) > GET_MODE_SIZE (mode)
873 && ((var_size = int_size_in_bytes (TREE_TYPE (decl))) > 0
874 && var_size < GET_MODE_SIZE (GET_MODE (reg))))
878 /* Convert machine endian to little endian WRT size of mode of REG. */
879 if (WORDS_BIG_ENDIAN)
880 offset_le = ((GET_MODE_SIZE (GET_MODE (reg)) - 1 - offset)
881 / UNITS_PER_WORD) * UNITS_PER_WORD;
883 offset_le = (offset / UNITS_PER_WORD) * UNITS_PER_WORD;
885 if (BYTES_BIG_ENDIAN)
886 offset_le += ((GET_MODE_SIZE (GET_MODE (reg)) - 1 - offset)
889 offset_le += offset % UNITS_PER_WORD;
891 if (offset_le >= var_size)
893 /* MODE is wider than the variable so the new reg will cover
894 the whole variable so the resulting OFFSET should be 0. */
899 /* Convert little endian to machine endian WRT size of variable. */
900 if (WORDS_BIG_ENDIAN)
901 offset = ((var_size - 1 - offset_le)
902 / UNITS_PER_WORD) * UNITS_PER_WORD;
904 offset = (offset_le / UNITS_PER_WORD) * UNITS_PER_WORD;
906 if (BYTES_BIG_ENDIAN)
907 offset += ((var_size - 1 - offset_le)
910 offset += offset_le % UNITS_PER_WORD;
914 REG_ATTRS (new) = get_reg_attrs (REG_EXPR (reg),
915 REG_OFFSET (reg) + offset);
919 /* Set the decl for MEM to DECL. */
922 set_reg_attrs_from_mem (rtx reg, rtx mem)
924 if (MEM_OFFSET (mem) && GET_CODE (MEM_OFFSET (mem)) == CONST_INT)
926 = get_reg_attrs (MEM_EXPR (mem), INTVAL (MEM_OFFSET (mem)));
929 /* Set the register attributes for registers contained in PARM_RTX.
930 Use needed values from memory attributes of MEM. */
933 set_reg_attrs_for_parm (rtx parm_rtx, rtx mem)
935 if (REG_P (parm_rtx))
936 set_reg_attrs_from_mem (parm_rtx, mem);
937 else if (GET_CODE (parm_rtx) == PARALLEL)
939 /* Check for a NULL entry in the first slot, used to indicate that the
940 parameter goes both on the stack and in registers. */
941 int i = XEXP (XVECEXP (parm_rtx, 0, 0), 0) ? 0 : 1;
942 for (; i < XVECLEN (parm_rtx, 0); i++)
944 rtx x = XVECEXP (parm_rtx, 0, i);
945 if (REG_P (XEXP (x, 0)))
946 REG_ATTRS (XEXP (x, 0))
947 = get_reg_attrs (MEM_EXPR (mem),
948 INTVAL (XEXP (x, 1)));
953 /* Assign the RTX X to declaration T. */
955 set_decl_rtl (tree t, rtx x)
957 DECL_CHECK (t)->decl.rtl = x;
961 /* For register, we maintain the reverse information too. */
963 REG_ATTRS (x) = get_reg_attrs (t, 0);
964 else if (GET_CODE (x) == SUBREG)
965 REG_ATTRS (SUBREG_REG (x))
966 = get_reg_attrs (t, -SUBREG_BYTE (x));
967 if (GET_CODE (x) == CONCAT)
969 if (REG_P (XEXP (x, 0)))
970 REG_ATTRS (XEXP (x, 0)) = get_reg_attrs (t, 0);
971 if (REG_P (XEXP (x, 1)))
972 REG_ATTRS (XEXP (x, 1))
973 = get_reg_attrs (t, GET_MODE_UNIT_SIZE (GET_MODE (XEXP (x, 0))));
975 if (GET_CODE (x) == PARALLEL)
978 for (i = 0; i < XVECLEN (x, 0); i++)
980 rtx y = XVECEXP (x, 0, i);
981 if (REG_P (XEXP (y, 0)))
982 REG_ATTRS (XEXP (y, 0)) = get_reg_attrs (t, INTVAL (XEXP (y, 1)));
987 /* Assign the RTX X to parameter declaration T. */
989 set_decl_incoming_rtl (tree t, rtx x)
991 DECL_INCOMING_RTL (t) = x;
995 /* For register, we maintain the reverse information too. */
997 REG_ATTRS (x) = get_reg_attrs (t, 0);
998 else if (GET_CODE (x) == SUBREG)
999 REG_ATTRS (SUBREG_REG (x))
1000 = get_reg_attrs (t, -SUBREG_BYTE (x));
1001 if (GET_CODE (x) == CONCAT)
1003 if (REG_P (XEXP (x, 0)))
1004 REG_ATTRS (XEXP (x, 0)) = get_reg_attrs (t, 0);
1005 if (REG_P (XEXP (x, 1)))
1006 REG_ATTRS (XEXP (x, 1))
1007 = get_reg_attrs (t, GET_MODE_UNIT_SIZE (GET_MODE (XEXP (x, 0))));
1009 if (GET_CODE (x) == PARALLEL)
1013 /* Check for a NULL entry, used to indicate that the parameter goes
1014 both on the stack and in registers. */
1015 if (XEXP (XVECEXP (x, 0, 0), 0))
1020 for (i = start; i < XVECLEN (x, 0); i++)
1022 rtx y = XVECEXP (x, 0, i);
1023 if (REG_P (XEXP (y, 0)))
1024 REG_ATTRS (XEXP (y, 0)) = get_reg_attrs (t, INTVAL (XEXP (y, 1)));
1029 /* Identify REG (which may be a CONCAT) as a user register. */
1032 mark_user_reg (rtx reg)
1034 if (GET_CODE (reg) == CONCAT)
1036 REG_USERVAR_P (XEXP (reg, 0)) = 1;
1037 REG_USERVAR_P (XEXP (reg, 1)) = 1;
1041 gcc_assert (REG_P (reg));
1042 REG_USERVAR_P (reg) = 1;
1046 /* Identify REG as a probable pointer register and show its alignment
1047 as ALIGN, if nonzero. */
1050 mark_reg_pointer (rtx reg, int align)
1052 if (! REG_POINTER (reg))
1054 REG_POINTER (reg) = 1;
1057 REGNO_POINTER_ALIGN (REGNO (reg)) = align;
1059 else if (align && align < REGNO_POINTER_ALIGN (REGNO (reg)))
1060 /* We can no-longer be sure just how aligned this pointer is. */
1061 REGNO_POINTER_ALIGN (REGNO (reg)) = align;
1064 /* Return 1 plus largest pseudo reg number used in the current function. */
1072 /* Return 1 + the largest label number used so far in the current function. */
1075 max_label_num (void)
1080 /* Return first label number used in this function (if any were used). */
1083 get_first_label_num (void)
1085 return first_label_num;
1088 /* If the rtx for label was created during the expansion of a nested
1089 function, then first_label_num won't include this label number.
1090 Fix this now so that array indicies work later. */
1093 maybe_set_first_label_num (rtx x)
1095 if (CODE_LABEL_NUMBER (x) < first_label_num)
1096 first_label_num = CODE_LABEL_NUMBER (x);
1099 /* Return a value representing some low-order bits of X, where the number
1100 of low-order bits is given by MODE. Note that no conversion is done
1101 between floating-point and fixed-point values, rather, the bit
1102 representation is returned.
1104 This function handles the cases in common between gen_lowpart, below,
1105 and two variants in cse.c and combine.c. These are the cases that can
1106 be safely handled at all points in the compilation.
1108 If this is not a case we can handle, return 0. */
1111 gen_lowpart_common (enum machine_mode mode, rtx x)
1113 int msize = GET_MODE_SIZE (mode);
1116 enum machine_mode innermode;
1118 /* Unfortunately, this routine doesn't take a parameter for the mode of X,
1119 so we have to make one up. Yuk. */
1120 innermode = GET_MODE (x);
1121 if (GET_CODE (x) == CONST_INT && msize <= HOST_BITS_PER_WIDE_INT)
1122 innermode = mode_for_size (HOST_BITS_PER_WIDE_INT, MODE_INT, 0);
1123 else if (innermode == VOIDmode)
1124 innermode = mode_for_size (HOST_BITS_PER_WIDE_INT * 2, MODE_INT, 0);
1126 xsize = GET_MODE_SIZE (innermode);
1128 gcc_assert (innermode != VOIDmode && innermode != BLKmode);
1130 if (innermode == mode)
1133 /* MODE must occupy no more words than the mode of X. */
1134 if ((msize + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD
1135 > ((xsize + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))
1138 /* Don't allow generating paradoxical FLOAT_MODE subregs. */
1139 if (GET_MODE_CLASS (mode) == MODE_FLOAT && msize > xsize)
1142 offset = subreg_lowpart_offset (mode, innermode);
1144 if ((GET_CODE (x) == ZERO_EXTEND || GET_CODE (x) == SIGN_EXTEND)
1145 && (GET_MODE_CLASS (mode) == MODE_INT
1146 || GET_MODE_CLASS (mode) == MODE_PARTIAL_INT))
1148 /* If we are getting the low-order part of something that has been
1149 sign- or zero-extended, we can either just use the object being
1150 extended or make a narrower extension. If we want an even smaller
1151 piece than the size of the object being extended, call ourselves
1154 This case is used mostly by combine and cse. */
1156 if (GET_MODE (XEXP (x, 0)) == mode)
1158 else if (msize < GET_MODE_SIZE (GET_MODE (XEXP (x, 0))))
1159 return gen_lowpart_common (mode, XEXP (x, 0));
1160 else if (msize < xsize)
1161 return gen_rtx_fmt_e (GET_CODE (x), mode, XEXP (x, 0));
1163 else if (GET_CODE (x) == SUBREG || REG_P (x)
1164 || GET_CODE (x) == CONCAT || GET_CODE (x) == CONST_VECTOR
1165 || GET_CODE (x) == CONST_DOUBLE || GET_CODE (x) == CONST_INT)
1166 return simplify_gen_subreg (mode, x, innermode, offset);
1168 /* Otherwise, we can't do this. */
1172 /* Return the constant real or imaginary part (which has mode MODE)
1173 of a complex value X. The IMAGPART_P argument determines whether
1174 the real or complex component should be returned. This function
1175 returns NULL_RTX if the component isn't a constant. */
1178 gen_complex_constant_part (enum machine_mode mode, rtx x, int imagpart_p)
1183 && GET_CODE (XEXP (x, 0)) == SYMBOL_REF)
1185 decl = SYMBOL_REF_DECL (XEXP (x, 0));
1186 if (decl != NULL_TREE && TREE_CODE (decl) == COMPLEX_CST)
1188 part = imagpart_p ? TREE_IMAGPART (decl) : TREE_REALPART (decl);
1189 if (TREE_CODE (part) == REAL_CST
1190 || TREE_CODE (part) == INTEGER_CST)
1191 return expand_expr (part, NULL_RTX, mode, 0);
1197 /* Return the real part (which has mode MODE) of a complex value X.
1198 This always comes at the low address in memory. */
1201 gen_realpart (enum machine_mode mode, rtx x)
1205 /* Handle complex constants. */
1206 part = gen_complex_constant_part (mode, x, 0);
1207 if (part != NULL_RTX)
1210 if (WORDS_BIG_ENDIAN
1211 && GET_MODE_BITSIZE (mode) < BITS_PER_WORD
1213 && REGNO (x) < FIRST_PSEUDO_REGISTER)
1215 ("can't access real part of complex value in hard register");
1216 else if (WORDS_BIG_ENDIAN)
1217 return gen_highpart (mode, x);
1219 return gen_lowpart (mode, x);
1222 /* Return the imaginary part (which has mode MODE) of a complex value X.
1223 This always comes at the high address in memory. */
1226 gen_imagpart (enum machine_mode mode, rtx x)
1230 /* Handle complex constants. */
1231 part = gen_complex_constant_part (mode, x, 1);
1232 if (part != NULL_RTX)
1235 if (WORDS_BIG_ENDIAN)
1236 return gen_lowpart (mode, x);
1237 else if (! WORDS_BIG_ENDIAN
1238 && GET_MODE_BITSIZE (mode) < BITS_PER_WORD
1240 && REGNO (x) < FIRST_PSEUDO_REGISTER)
1242 ("can't access imaginary part of complex value in hard register");
1244 return gen_highpart (mode, x);
1248 gen_highpart (enum machine_mode mode, rtx x)
1250 unsigned int msize = GET_MODE_SIZE (mode);
1253 /* This case loses if X is a subreg. To catch bugs early,
1254 complain if an invalid MODE is used even in other cases. */
1255 gcc_assert (msize <= UNITS_PER_WORD
1256 || msize == (unsigned int) GET_MODE_UNIT_SIZE (GET_MODE (x)));
1258 result = simplify_gen_subreg (mode, x, GET_MODE (x),
1259 subreg_highpart_offset (mode, GET_MODE (x)));
1260 gcc_assert (result);
1262 /* simplify_gen_subreg is not guaranteed to return a valid operand for
1263 the target if we have a MEM. gen_highpart must return a valid operand,
1264 emitting code if necessary to do so. */
1267 result = validize_mem (result);
1268 gcc_assert (result);
1274 /* Like gen_highpart, but accept mode of EXP operand in case EXP can
1275 be VOIDmode constant. */
1277 gen_highpart_mode (enum machine_mode outermode, enum machine_mode innermode, rtx exp)
1279 if (GET_MODE (exp) != VOIDmode)
1281 gcc_assert (GET_MODE (exp) == innermode);
1282 return gen_highpart (outermode, exp);
1284 return simplify_gen_subreg (outermode, exp, innermode,
1285 subreg_highpart_offset (outermode, innermode));
1288 /* Return offset in bytes to get OUTERMODE low part
1289 of the value in mode INNERMODE stored in memory in target format. */
1292 subreg_lowpart_offset (enum machine_mode outermode, enum machine_mode innermode)
1294 unsigned int offset = 0;
1295 int difference = (GET_MODE_SIZE (innermode) - GET_MODE_SIZE (outermode));
1299 if (WORDS_BIG_ENDIAN)
1300 offset += (difference / UNITS_PER_WORD) * UNITS_PER_WORD;
1301 if (BYTES_BIG_ENDIAN)
1302 offset += difference % UNITS_PER_WORD;
1308 /* Return offset in bytes to get OUTERMODE high part
1309 of the value in mode INNERMODE stored in memory in target format. */
1311 subreg_highpart_offset (enum machine_mode outermode, enum machine_mode innermode)
1313 unsigned int offset = 0;
1314 int difference = (GET_MODE_SIZE (innermode) - GET_MODE_SIZE (outermode));
1316 gcc_assert (GET_MODE_SIZE (innermode) >= GET_MODE_SIZE (outermode));
1320 if (! WORDS_BIG_ENDIAN)
1321 offset += (difference / UNITS_PER_WORD) * UNITS_PER_WORD;
1322 if (! BYTES_BIG_ENDIAN)
1323 offset += difference % UNITS_PER_WORD;
1329 /* Return 1 iff X, assumed to be a SUBREG,
1330 refers to the least significant part of its containing reg.
1331 If X is not a SUBREG, always return 1 (it is its own low part!). */
1334 subreg_lowpart_p (rtx x)
1336 if (GET_CODE (x) != SUBREG)
1338 else if (GET_MODE (SUBREG_REG (x)) == VOIDmode)
1341 return (subreg_lowpart_offset (GET_MODE (x), GET_MODE (SUBREG_REG (x)))
1342 == SUBREG_BYTE (x));
1345 /* Return subword OFFSET of operand OP.
1346 The word number, OFFSET, is interpreted as the word number starting
1347 at the low-order address. OFFSET 0 is the low-order word if not
1348 WORDS_BIG_ENDIAN, otherwise it is the high-order word.
1350 If we cannot extract the required word, we return zero. Otherwise,
1351 an rtx corresponding to the requested word will be returned.
1353 VALIDATE_ADDRESS is nonzero if the address should be validated. Before
1354 reload has completed, a valid address will always be returned. After
1355 reload, if a valid address cannot be returned, we return zero.
1357 If VALIDATE_ADDRESS is zero, we simply form the required address; validating
1358 it is the responsibility of the caller.
1360 MODE is the mode of OP in case it is a CONST_INT.
1362 ??? This is still rather broken for some cases. The problem for the
1363 moment is that all callers of this thing provide no 'goal mode' to
1364 tell us to work with. This exists because all callers were written
1365 in a word based SUBREG world.
1366 Now use of this function can be deprecated by simplify_subreg in most
1371 operand_subword (rtx op, unsigned int offset, int validate_address, enum machine_mode mode)
1373 if (mode == VOIDmode)
1374 mode = GET_MODE (op);
1376 gcc_assert (mode != VOIDmode);
1378 /* If OP is narrower than a word, fail. */
1380 && (GET_MODE_SIZE (mode) < UNITS_PER_WORD))
1383 /* If we want a word outside OP, return zero. */
1385 && (offset + 1) * UNITS_PER_WORD > GET_MODE_SIZE (mode))
1388 /* Form a new MEM at the requested address. */
1391 rtx new = adjust_address_nv (op, word_mode, offset * UNITS_PER_WORD);
1393 if (! validate_address)
1396 else if (reload_completed)
1398 if (! strict_memory_address_p (word_mode, XEXP (new, 0)))
1402 return replace_equiv_address (new, XEXP (new, 0));
1405 /* Rest can be handled by simplify_subreg. */
1406 return simplify_gen_subreg (word_mode, op, mode, (offset * UNITS_PER_WORD));
1409 /* Similar to `operand_subword', but never return 0. If we can't extract
1410 the required subword, put OP into a register and try again. If that fails,
1411 abort. We always validate the address in this case.
1413 MODE is the mode of OP, in case it is CONST_INT. */
1416 operand_subword_force (rtx op, unsigned int offset, enum machine_mode mode)
1418 rtx result = operand_subword (op, offset, 1, mode);
1423 if (mode != BLKmode && mode != VOIDmode)
1425 /* If this is a register which can not be accessed by words, copy it
1426 to a pseudo register. */
1428 op = copy_to_reg (op);
1430 op = force_reg (mode, op);
1433 result = operand_subword (op, offset, 1, mode);
1434 gcc_assert (result);
1439 /* Given a compare instruction, swap the operands.
1440 A test instruction is changed into a compare of 0 against the operand. */
1443 reverse_comparison (rtx insn)
1445 rtx body = PATTERN (insn);
1448 if (GET_CODE (body) == SET)
1449 comp = SET_SRC (body);
1451 comp = SET_SRC (XVECEXP (body, 0, 0));
1453 if (GET_CODE (comp) == COMPARE)
1455 rtx op0 = XEXP (comp, 0);
1456 rtx op1 = XEXP (comp, 1);
1457 XEXP (comp, 0) = op1;
1458 XEXP (comp, 1) = op0;
1462 rtx new = gen_rtx_COMPARE (VOIDmode,
1463 CONST0_RTX (GET_MODE (comp)), comp);
1464 if (GET_CODE (body) == SET)
1465 SET_SRC (body) = new;
1467 SET_SRC (XVECEXP (body, 0, 0)) = new;
1471 /* Within a MEM_EXPR, we care about either (1) a component ref of a decl,
1472 or (2) a component ref of something variable. Represent the later with
1473 a NULL expression. */
1476 component_ref_for_mem_expr (tree ref)
1478 tree inner = TREE_OPERAND (ref, 0);
1480 if (TREE_CODE (inner) == COMPONENT_REF)
1481 inner = component_ref_for_mem_expr (inner);
1484 /* Now remove any conversions: they don't change what the underlying
1485 object is. Likewise for SAVE_EXPR. */
1486 while (TREE_CODE (inner) == NOP_EXPR || TREE_CODE (inner) == CONVERT_EXPR
1487 || TREE_CODE (inner) == NON_LVALUE_EXPR
1488 || TREE_CODE (inner) == VIEW_CONVERT_EXPR
1489 || TREE_CODE (inner) == SAVE_EXPR)
1490 inner = TREE_OPERAND (inner, 0);
1492 if (! DECL_P (inner))
1496 if (inner == TREE_OPERAND (ref, 0))
1499 return build3 (COMPONENT_REF, TREE_TYPE (ref), inner,
1500 TREE_OPERAND (ref, 1), NULL_TREE);
1503 /* Returns 1 if both MEM_EXPR can be considered equal
1507 mem_expr_equal_p (tree expr1, tree expr2)
1512 if (! expr1 || ! expr2)
1515 if (TREE_CODE (expr1) != TREE_CODE (expr2))
1518 if (TREE_CODE (expr1) == COMPONENT_REF)
1520 mem_expr_equal_p (TREE_OPERAND (expr1, 0),
1521 TREE_OPERAND (expr2, 0))
1522 && mem_expr_equal_p (TREE_OPERAND (expr1, 1), /* field decl */
1523 TREE_OPERAND (expr2, 1));
1525 if (INDIRECT_REF_P (expr1))
1526 return mem_expr_equal_p (TREE_OPERAND (expr1, 0),
1527 TREE_OPERAND (expr2, 0));
1529 /* ARRAY_REFs, ARRAY_RANGE_REFs and BIT_FIELD_REFs should already
1530 have been resolved here. */
1531 gcc_assert (DECL_P (expr1));
1533 /* Decls with different pointers can't be equal. */
1537 /* Given REF, a MEM, and T, either the type of X or the expression
1538 corresponding to REF, set the memory attributes. OBJECTP is nonzero
1539 if we are making a new object of this type. BITPOS is nonzero if
1540 there is an offset outstanding on T that will be applied later. */
1543 set_mem_attributes_minus_bitpos (rtx ref, tree t, int objectp,
1544 HOST_WIDE_INT bitpos)
1546 HOST_WIDE_INT alias = MEM_ALIAS_SET (ref);
1547 tree expr = MEM_EXPR (ref);
1548 rtx offset = MEM_OFFSET (ref);
1549 rtx size = MEM_SIZE (ref);
1550 unsigned int align = MEM_ALIGN (ref);
1551 HOST_WIDE_INT apply_bitpos = 0;
1554 /* It can happen that type_for_mode was given a mode for which there
1555 is no language-level type. In which case it returns NULL, which
1560 type = TYPE_P (t) ? t : TREE_TYPE (t);
1561 if (type == error_mark_node)
1564 /* If we have already set DECL_RTL = ref, get_alias_set will get the
1565 wrong answer, as it assumes that DECL_RTL already has the right alias
1566 info. Callers should not set DECL_RTL until after the call to
1567 set_mem_attributes. */
1568 gcc_assert (!DECL_P (t) || ref != DECL_RTL_IF_SET (t));
1570 /* Get the alias set from the expression or type (perhaps using a
1571 front-end routine) and use it. */
1572 alias = get_alias_set (t);
1574 MEM_VOLATILE_P (ref) |= TYPE_VOLATILE (type);
1575 MEM_IN_STRUCT_P (ref) = AGGREGATE_TYPE_P (type);
1576 MEM_POINTER (ref) = POINTER_TYPE_P (type);
1577 MEM_NOTRAP_P (ref) = TREE_THIS_NOTRAP (t);
1579 /* If we are making an object of this type, or if this is a DECL, we know
1580 that it is a scalar if the type is not an aggregate. */
1581 if ((objectp || DECL_P (t)) && ! AGGREGATE_TYPE_P (type))
1582 MEM_SCALAR_P (ref) = 1;
1584 /* We can set the alignment from the type if we are making an object,
1585 this is an INDIRECT_REF, or if TYPE_ALIGN_OK. */
1586 if (objectp || TREE_CODE (t) == INDIRECT_REF
1587 || TREE_CODE (t) == ALIGN_INDIRECT_REF
1588 || TYPE_ALIGN_OK (type))
1589 align = MAX (align, TYPE_ALIGN (type));
1591 if (TREE_CODE (t) == MISALIGNED_INDIRECT_REF)
1593 if (integer_zerop (TREE_OPERAND (t, 1)))
1594 /* We don't know anything about the alignment. */
1595 align = BITS_PER_UNIT;
1597 align = tree_low_cst (TREE_OPERAND (t, 1), 1);
1600 /* If the size is known, we can set that. */
1601 if (TYPE_SIZE_UNIT (type) && host_integerp (TYPE_SIZE_UNIT (type), 1))
1602 size = GEN_INT (tree_low_cst (TYPE_SIZE_UNIT (type), 1));
1604 /* If T is not a type, we may be able to deduce some more information about
1608 tree base = get_base_address (t);
1609 if (base && DECL_P (base)
1610 && TREE_READONLY (base)
1611 && (TREE_STATIC (base) || DECL_EXTERNAL (base)))
1612 MEM_READONLY_P (ref) = 1;
1614 if (TREE_THIS_VOLATILE (t))
1615 MEM_VOLATILE_P (ref) = 1;
1617 /* Now remove any conversions: they don't change what the underlying
1618 object is. Likewise for SAVE_EXPR. */
1619 while (TREE_CODE (t) == NOP_EXPR || TREE_CODE (t) == CONVERT_EXPR
1620 || TREE_CODE (t) == NON_LVALUE_EXPR
1621 || TREE_CODE (t) == VIEW_CONVERT_EXPR
1622 || TREE_CODE (t) == SAVE_EXPR)
1623 t = TREE_OPERAND (t, 0);
1625 /* If this expression can't be addressed (e.g., it contains a reference
1626 to a non-addressable field), show we don't change its alias set. */
1627 if (! can_address_p (t))
1628 MEM_KEEP_ALIAS_SET_P (ref) = 1;
1630 /* If this is a decl, set the attributes of the MEM from it. */
1634 offset = const0_rtx;
1635 apply_bitpos = bitpos;
1636 size = (DECL_SIZE_UNIT (t)
1637 && host_integerp (DECL_SIZE_UNIT (t), 1)
1638 ? GEN_INT (tree_low_cst (DECL_SIZE_UNIT (t), 1)) : 0);
1639 align = DECL_ALIGN (t);
1642 /* If this is a constant, we know the alignment. */
1643 else if (CONSTANT_CLASS_P (t))
1645 align = TYPE_ALIGN (type);
1646 #ifdef CONSTANT_ALIGNMENT
1647 align = CONSTANT_ALIGNMENT (t, align);
1651 /* If this is a field reference and not a bit-field, record it. */
1652 /* ??? There is some information that can be gleened from bit-fields,
1653 such as the word offset in the structure that might be modified.
1654 But skip it for now. */
1655 else if (TREE_CODE (t) == COMPONENT_REF
1656 && ! DECL_BIT_FIELD (TREE_OPERAND (t, 1)))
1658 expr = component_ref_for_mem_expr (t);
1659 offset = const0_rtx;
1660 apply_bitpos = bitpos;
1661 /* ??? Any reason the field size would be different than
1662 the size we got from the type? */
1665 /* If this is an array reference, look for an outer field reference. */
1666 else if (TREE_CODE (t) == ARRAY_REF)
1668 tree off_tree = size_zero_node;
1669 /* We can't modify t, because we use it at the end of the
1675 tree index = TREE_OPERAND (t2, 1);
1676 tree low_bound = array_ref_low_bound (t2);
1677 tree unit_size = array_ref_element_size (t2);
1679 /* We assume all arrays have sizes that are a multiple of a byte.
1680 First subtract the lower bound, if any, in the type of the
1681 index, then convert to sizetype and multiply by the size of
1682 the array element. */
1683 if (! integer_zerop (low_bound))
1684 index = fold (build2 (MINUS_EXPR, TREE_TYPE (index),
1687 off_tree = size_binop (PLUS_EXPR,
1688 size_binop (MULT_EXPR, convert (sizetype,
1692 t2 = TREE_OPERAND (t2, 0);
1694 while (TREE_CODE (t2) == ARRAY_REF);
1700 if (host_integerp (off_tree, 1))
1702 HOST_WIDE_INT ioff = tree_low_cst (off_tree, 1);
1703 HOST_WIDE_INT aoff = (ioff & -ioff) * BITS_PER_UNIT;
1704 align = DECL_ALIGN (t2);
1705 if (aoff && (unsigned HOST_WIDE_INT) aoff < align)
1707 offset = GEN_INT (ioff);
1708 apply_bitpos = bitpos;
1711 else if (TREE_CODE (t2) == COMPONENT_REF)
1713 expr = component_ref_for_mem_expr (t2);
1714 if (host_integerp (off_tree, 1))
1716 offset = GEN_INT (tree_low_cst (off_tree, 1));
1717 apply_bitpos = bitpos;
1719 /* ??? Any reason the field size would be different than
1720 the size we got from the type? */
1722 else if (flag_argument_noalias > 1
1723 && (INDIRECT_REF_P (t2))
1724 && TREE_CODE (TREE_OPERAND (t2, 0)) == PARM_DECL)
1731 /* If this is a Fortran indirect argument reference, record the
1733 else if (flag_argument_noalias > 1
1734 && (INDIRECT_REF_P (t))
1735 && TREE_CODE (TREE_OPERAND (t, 0)) == PARM_DECL)
1742 /* If we modified OFFSET based on T, then subtract the outstanding
1743 bit position offset. Similarly, increase the size of the accessed
1744 object to contain the negative offset. */
1747 offset = plus_constant (offset, -(apply_bitpos / BITS_PER_UNIT));
1749 size = plus_constant (size, apply_bitpos / BITS_PER_UNIT);
1752 if (TREE_CODE (t) == ALIGN_INDIRECT_REF)
1754 /* Force EXPR and OFFSE to NULL, since we don't know exactly what
1755 we're overlapping. */
1760 /* Now set the attributes we computed above. */
1762 = get_mem_attrs (alias, expr, offset, size, align, GET_MODE (ref));
1764 /* If this is already known to be a scalar or aggregate, we are done. */
1765 if (MEM_IN_STRUCT_P (ref) || MEM_SCALAR_P (ref))
1768 /* If it is a reference into an aggregate, this is part of an aggregate.
1769 Otherwise we don't know. */
1770 else if (TREE_CODE (t) == COMPONENT_REF || TREE_CODE (t) == ARRAY_REF
1771 || TREE_CODE (t) == ARRAY_RANGE_REF
1772 || TREE_CODE (t) == BIT_FIELD_REF)
1773 MEM_IN_STRUCT_P (ref) = 1;
1777 set_mem_attributes (rtx ref, tree t, int objectp)
1779 set_mem_attributes_minus_bitpos (ref, t, objectp, 0);
1782 /* Set the decl for MEM to DECL. */
1785 set_mem_attrs_from_reg (rtx mem, rtx reg)
1788 = get_mem_attrs (MEM_ALIAS_SET (mem), REG_EXPR (reg),
1789 GEN_INT (REG_OFFSET (reg)),
1790 MEM_SIZE (mem), MEM_ALIGN (mem), GET_MODE (mem));
1793 /* Set the alias set of MEM to SET. */
1796 set_mem_alias_set (rtx mem, HOST_WIDE_INT set)
1798 #ifdef ENABLE_CHECKING
1799 /* If the new and old alias sets don't conflict, something is wrong. */
1800 gcc_assert (alias_sets_conflict_p (set, MEM_ALIAS_SET (mem)));
1803 MEM_ATTRS (mem) = get_mem_attrs (set, MEM_EXPR (mem), MEM_OFFSET (mem),
1804 MEM_SIZE (mem), MEM_ALIGN (mem),
1808 /* Set the alignment of MEM to ALIGN bits. */
1811 set_mem_align (rtx mem, unsigned int align)
1813 MEM_ATTRS (mem) = get_mem_attrs (MEM_ALIAS_SET (mem), MEM_EXPR (mem),
1814 MEM_OFFSET (mem), MEM_SIZE (mem), align,
1818 /* Set the expr for MEM to EXPR. */
1821 set_mem_expr (rtx mem, tree expr)
1824 = get_mem_attrs (MEM_ALIAS_SET (mem), expr, MEM_OFFSET (mem),
1825 MEM_SIZE (mem), MEM_ALIGN (mem), GET_MODE (mem));
1828 /* Set the offset of MEM to OFFSET. */
1831 set_mem_offset (rtx mem, rtx offset)
1833 MEM_ATTRS (mem) = get_mem_attrs (MEM_ALIAS_SET (mem), MEM_EXPR (mem),
1834 offset, MEM_SIZE (mem), MEM_ALIGN (mem),
1838 /* Set the size of MEM to SIZE. */
1841 set_mem_size (rtx mem, rtx size)
1843 MEM_ATTRS (mem) = get_mem_attrs (MEM_ALIAS_SET (mem), MEM_EXPR (mem),
1844 MEM_OFFSET (mem), size, MEM_ALIGN (mem),
1848 /* Return a memory reference like MEMREF, but with its mode changed to MODE
1849 and its address changed to ADDR. (VOIDmode means don't change the mode.
1850 NULL for ADDR means don't change the address.) VALIDATE is nonzero if the
1851 returned memory location is required to be valid. The memory
1852 attributes are not changed. */
1855 change_address_1 (rtx memref, enum machine_mode mode, rtx addr, int validate)
1859 gcc_assert (MEM_P (memref));
1860 if (mode == VOIDmode)
1861 mode = GET_MODE (memref);
1863 addr = XEXP (memref, 0);
1864 if (mode == GET_MODE (memref) && addr == XEXP (memref, 0)
1865 && (!validate || memory_address_p (mode, addr)))
1870 if (reload_in_progress || reload_completed)
1871 gcc_assert (memory_address_p (mode, addr));
1873 addr = memory_address (mode, addr);
1876 if (rtx_equal_p (addr, XEXP (memref, 0)) && mode == GET_MODE (memref))
1879 new = gen_rtx_MEM (mode, addr);
1880 MEM_COPY_ATTRIBUTES (new, memref);
1884 /* Like change_address_1 with VALIDATE nonzero, but we are not saying in what
1885 way we are changing MEMREF, so we only preserve the alias set. */
1888 change_address (rtx memref, enum machine_mode mode, rtx addr)
1890 rtx new = change_address_1 (memref, mode, addr, 1), size;
1891 enum machine_mode mmode = GET_MODE (new);
1894 size = mmode == BLKmode ? 0 : GEN_INT (GET_MODE_SIZE (mmode));
1895 align = mmode == BLKmode ? BITS_PER_UNIT : GET_MODE_ALIGNMENT (mmode);
1897 /* If there are no changes, just return the original memory reference. */
1900 if (MEM_ATTRS (memref) == 0
1901 || (MEM_EXPR (memref) == NULL
1902 && MEM_OFFSET (memref) == NULL
1903 && MEM_SIZE (memref) == size
1904 && MEM_ALIGN (memref) == align))
1907 new = gen_rtx_MEM (mmode, XEXP (memref, 0));
1908 MEM_COPY_ATTRIBUTES (new, memref);
1912 = get_mem_attrs (MEM_ALIAS_SET (memref), 0, 0, size, align, mmode);
1917 /* Return a memory reference like MEMREF, but with its mode changed
1918 to MODE and its address offset by OFFSET bytes. If VALIDATE is
1919 nonzero, the memory address is forced to be valid.
1920 If ADJUST is zero, OFFSET is only used to update MEM_ATTRS
1921 and caller is responsible for adjusting MEMREF base register. */
1924 adjust_address_1 (rtx memref, enum machine_mode mode, HOST_WIDE_INT offset,
1925 int validate, int adjust)
1927 rtx addr = XEXP (memref, 0);
1929 rtx memoffset = MEM_OFFSET (memref);
1931 unsigned int memalign = MEM_ALIGN (memref);
1933 /* If there are no changes, just return the original memory reference. */
1934 if (mode == GET_MODE (memref) && !offset
1935 && (!validate || memory_address_p (mode, addr)))
1938 /* ??? Prefer to create garbage instead of creating shared rtl.
1939 This may happen even if offset is nonzero -- consider
1940 (plus (plus reg reg) const_int) -- so do this always. */
1941 addr = copy_rtx (addr);
1945 /* If MEMREF is a LO_SUM and the offset is within the alignment of the
1946 object, we can merge it into the LO_SUM. */
1947 if (GET_MODE (memref) != BLKmode && GET_CODE (addr) == LO_SUM
1949 && (unsigned HOST_WIDE_INT) offset
1950 < GET_MODE_ALIGNMENT (GET_MODE (memref)) / BITS_PER_UNIT)
1951 addr = gen_rtx_LO_SUM (Pmode, XEXP (addr, 0),
1952 plus_constant (XEXP (addr, 1), offset));
1954 addr = plus_constant (addr, offset);
1957 new = change_address_1 (memref, mode, addr, validate);
1959 /* Compute the new values of the memory attributes due to this adjustment.
1960 We add the offsets and update the alignment. */
1962 memoffset = GEN_INT (offset + INTVAL (memoffset));
1964 /* Compute the new alignment by taking the MIN of the alignment and the
1965 lowest-order set bit in OFFSET, but don't change the alignment if OFFSET
1970 (unsigned HOST_WIDE_INT) (offset & -offset) * BITS_PER_UNIT);
1972 /* We can compute the size in a number of ways. */
1973 if (GET_MODE (new) != BLKmode)
1974 size = GEN_INT (GET_MODE_SIZE (GET_MODE (new)));
1975 else if (MEM_SIZE (memref))
1976 size = plus_constant (MEM_SIZE (memref), -offset);
1978 MEM_ATTRS (new) = get_mem_attrs (MEM_ALIAS_SET (memref), MEM_EXPR (memref),
1979 memoffset, size, memalign, GET_MODE (new));
1981 /* At some point, we should validate that this offset is within the object,
1982 if all the appropriate values are known. */
1986 /* Return a memory reference like MEMREF, but with its mode changed
1987 to MODE and its address changed to ADDR, which is assumed to be
1988 MEMREF offseted by OFFSET bytes. If VALIDATE is
1989 nonzero, the memory address is forced to be valid. */
1992 adjust_automodify_address_1 (rtx memref, enum machine_mode mode, rtx addr,
1993 HOST_WIDE_INT offset, int validate)
1995 memref = change_address_1 (memref, VOIDmode, addr, validate);
1996 return adjust_address_1 (memref, mode, offset, validate, 0);
1999 /* Return a memory reference like MEMREF, but whose address is changed by
2000 adding OFFSET, an RTX, to it. POW2 is the highest power of two factor
2001 known to be in OFFSET (possibly 1). */
2004 offset_address (rtx memref, rtx offset, unsigned HOST_WIDE_INT pow2)
2006 rtx new, addr = XEXP (memref, 0);
2008 new = simplify_gen_binary (PLUS, Pmode, addr, offset);
2010 /* At this point we don't know _why_ the address is invalid. It
2011 could have secondary memory references, multiplies or anything.
2013 However, if we did go and rearrange things, we can wind up not
2014 being able to recognize the magic around pic_offset_table_rtx.
2015 This stuff is fragile, and is yet another example of why it is
2016 bad to expose PIC machinery too early. */
2017 if (! memory_address_p (GET_MODE (memref), new)
2018 && GET_CODE (addr) == PLUS
2019 && XEXP (addr, 0) == pic_offset_table_rtx)
2021 addr = force_reg (GET_MODE (addr), addr);
2022 new = simplify_gen_binary (PLUS, Pmode, addr, offset);
2025 update_temp_slot_address (XEXP (memref, 0), new);
2026 new = change_address_1 (memref, VOIDmode, new, 1);
2028 /* If there are no changes, just return the original memory reference. */
2032 /* Update the alignment to reflect the offset. Reset the offset, which
2035 = get_mem_attrs (MEM_ALIAS_SET (memref), MEM_EXPR (memref), 0, 0,
2036 MIN (MEM_ALIGN (memref), pow2 * BITS_PER_UNIT),
2041 /* Return a memory reference like MEMREF, but with its address changed to
2042 ADDR. The caller is asserting that the actual piece of memory pointed
2043 to is the same, just the form of the address is being changed, such as
2044 by putting something into a register. */
2047 replace_equiv_address (rtx memref, rtx addr)
2049 /* change_address_1 copies the memory attribute structure without change
2050 and that's exactly what we want here. */
2051 update_temp_slot_address (XEXP (memref, 0), addr);
2052 return change_address_1 (memref, VOIDmode, addr, 1);
2055 /* Likewise, but the reference is not required to be valid. */
2058 replace_equiv_address_nv (rtx memref, rtx addr)
2060 return change_address_1 (memref, VOIDmode, addr, 0);
2063 /* Return a memory reference like MEMREF, but with its mode widened to
2064 MODE and offset by OFFSET. This would be used by targets that e.g.
2065 cannot issue QImode memory operations and have to use SImode memory
2066 operations plus masking logic. */
2069 widen_memory_access (rtx memref, enum machine_mode mode, HOST_WIDE_INT offset)
2071 rtx new = adjust_address_1 (memref, mode, offset, 1, 1);
2072 tree expr = MEM_EXPR (new);
2073 rtx memoffset = MEM_OFFSET (new);
2074 unsigned int size = GET_MODE_SIZE (mode);
2076 /* If there are no changes, just return the original memory reference. */
2080 /* If we don't know what offset we were at within the expression, then
2081 we can't know if we've overstepped the bounds. */
2087 if (TREE_CODE (expr) == COMPONENT_REF)
2089 tree field = TREE_OPERAND (expr, 1);
2090 tree offset = component_ref_field_offset (expr);
2092 if (! DECL_SIZE_UNIT (field))
2098 /* Is the field at least as large as the access? If so, ok,
2099 otherwise strip back to the containing structure. */
2100 if (TREE_CODE (DECL_SIZE_UNIT (field)) == INTEGER_CST
2101 && compare_tree_int (DECL_SIZE_UNIT (field), size) >= 0
2102 && INTVAL (memoffset) >= 0)
2105 if (! host_integerp (offset, 1))
2111 expr = TREE_OPERAND (expr, 0);
2113 = (GEN_INT (INTVAL (memoffset)
2114 + tree_low_cst (offset, 1)
2115 + (tree_low_cst (DECL_FIELD_BIT_OFFSET (field), 1)
2118 /* Similarly for the decl. */
2119 else if (DECL_P (expr)
2120 && DECL_SIZE_UNIT (expr)
2121 && TREE_CODE (DECL_SIZE_UNIT (expr)) == INTEGER_CST
2122 && compare_tree_int (DECL_SIZE_UNIT (expr), size) >= 0
2123 && (! memoffset || INTVAL (memoffset) >= 0))
2127 /* The widened memory access overflows the expression, which means
2128 that it could alias another expression. Zap it. */
2135 memoffset = NULL_RTX;
2137 /* The widened memory may alias other stuff, so zap the alias set. */
2138 /* ??? Maybe use get_alias_set on any remaining expression. */
2140 MEM_ATTRS (new) = get_mem_attrs (0, expr, memoffset, GEN_INT (size),
2141 MEM_ALIGN (new), mode);
2146 /* Return a newly created CODE_LABEL rtx with a unique label number. */
2149 gen_label_rtx (void)
2151 return gen_rtx_CODE_LABEL (VOIDmode, 0, NULL_RTX, NULL_RTX,
2152 NULL, label_num++, NULL);
2155 /* For procedure integration. */
2157 /* Install new pointers to the first and last insns in the chain.
2158 Also, set cur_insn_uid to one higher than the last in use.
2159 Used for an inline-procedure after copying the insn chain. */
2162 set_new_first_and_last_insn (rtx first, rtx last)
2170 for (insn = first; insn; insn = NEXT_INSN (insn))
2171 cur_insn_uid = MAX (cur_insn_uid, INSN_UID (insn));
2176 /* Go through all the RTL insn bodies and copy any invalid shared
2177 structure. This routine should only be called once. */
2180 unshare_all_rtl_1 (tree fndecl, rtx insn)
2184 /* Make sure that virtual parameters are not shared. */
2185 for (decl = DECL_ARGUMENTS (fndecl); decl; decl = TREE_CHAIN (decl))
2186 SET_DECL_RTL (decl, copy_rtx_if_shared (DECL_RTL (decl)));
2188 /* Make sure that virtual stack slots are not shared. */
2189 unshare_all_decls (DECL_INITIAL (fndecl));
2191 /* Unshare just about everything else. */
2192 unshare_all_rtl_in_chain (insn);
2194 /* Make sure the addresses of stack slots found outside the insn chain
2195 (such as, in DECL_RTL of a variable) are not shared
2196 with the insn chain.
2198 This special care is necessary when the stack slot MEM does not
2199 actually appear in the insn chain. If it does appear, its address
2200 is unshared from all else at that point. */
2201 stack_slot_list = copy_rtx_if_shared (stack_slot_list);
2204 /* Go through all the RTL insn bodies and copy any invalid shared
2205 structure, again. This is a fairly expensive thing to do so it
2206 should be done sparingly. */
2209 unshare_all_rtl_again (rtx insn)
2214 for (p = insn; p; p = NEXT_INSN (p))
2217 reset_used_flags (PATTERN (p));
2218 reset_used_flags (REG_NOTES (p));
2219 reset_used_flags (LOG_LINKS (p));
2222 /* Make sure that virtual stack slots are not shared. */
2223 reset_used_decls (DECL_INITIAL (cfun->decl));
2225 /* Make sure that virtual parameters are not shared. */
2226 for (decl = DECL_ARGUMENTS (cfun->decl); decl; decl = TREE_CHAIN (decl))
2227 reset_used_flags (DECL_RTL (decl));
2229 reset_used_flags (stack_slot_list);
2231 unshare_all_rtl_1 (cfun->decl, insn);
2235 unshare_all_rtl (void)
2237 unshare_all_rtl_1 (current_function_decl, get_insns ());
2240 /* Check that ORIG is not marked when it should not be and mark ORIG as in use,
2241 Recursively does the same for subexpressions. */
2244 verify_rtx_sharing (rtx orig, rtx insn)
2249 const char *format_ptr;
2254 code = GET_CODE (x);
2256 /* These types may be freely shared. */
2271 /* SCRATCH must be shared because they represent distinct values. */
2273 if (REG_P (XEXP (x, 0)) && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)
2278 /* CONST can be shared if it contains a SYMBOL_REF. If it contains
2279 a LABEL_REF, it isn't sharable. */
2280 if (GET_CODE (XEXP (x, 0)) == PLUS
2281 && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF
2282 && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT)
2287 /* A MEM is allowed to be shared if its address is constant. */
2288 if (CONSTANT_ADDRESS_P (XEXP (x, 0))
2289 || reload_completed || reload_in_progress)
2298 /* This rtx may not be shared. If it has already been seen,
2299 replace it with a copy of itself. */
2300 #ifdef ENABLE_CHECKING
2301 if (RTX_FLAG (x, used))
2303 error ("Invalid rtl sharing found in the insn");
2305 error ("Shared rtx");
2307 internal_error ("Internal consistency failure");
2310 gcc_assert (!RTX_FLAG (x, used));
2312 RTX_FLAG (x, used) = 1;
2314 /* Now scan the subexpressions recursively. */
2316 format_ptr = GET_RTX_FORMAT (code);
2318 for (i = 0; i < GET_RTX_LENGTH (code); i++)
2320 switch (*format_ptr++)
2323 verify_rtx_sharing (XEXP (x, i), insn);
2327 if (XVEC (x, i) != NULL)
2330 int len = XVECLEN (x, i);
2332 for (j = 0; j < len; j++)
2334 /* We allow sharing of ASM_OPERANDS inside single
2336 if (j && GET_CODE (XVECEXP (x, i, j)) == SET
2337 && (GET_CODE (SET_SRC (XVECEXP (x, i, j)))
2339 verify_rtx_sharing (SET_DEST (XVECEXP (x, i, j)), insn);
2341 verify_rtx_sharing (XVECEXP (x, i, j), insn);
2350 /* Go through all the RTL insn bodies and check that there is no unexpected
2351 sharing in between the subexpressions. */
2354 verify_rtl_sharing (void)
2358 for (p = get_insns (); p; p = NEXT_INSN (p))
2361 reset_used_flags (PATTERN (p));
2362 reset_used_flags (REG_NOTES (p));
2363 reset_used_flags (LOG_LINKS (p));
2366 for (p = get_insns (); p; p = NEXT_INSN (p))
2369 verify_rtx_sharing (PATTERN (p), p);
2370 verify_rtx_sharing (REG_NOTES (p), p);
2371 verify_rtx_sharing (LOG_LINKS (p), p);
2375 /* Go through all the RTL insn bodies and copy any invalid shared structure.
2376 Assumes the mark bits are cleared at entry. */
2379 unshare_all_rtl_in_chain (rtx insn)
2381 for (; insn; insn = NEXT_INSN (insn))
2384 PATTERN (insn) = copy_rtx_if_shared (PATTERN (insn));
2385 REG_NOTES (insn) = copy_rtx_if_shared (REG_NOTES (insn));
2386 LOG_LINKS (insn) = copy_rtx_if_shared (LOG_LINKS (insn));
2390 /* Go through all virtual stack slots of a function and copy any
2391 shared structure. */
2393 unshare_all_decls (tree blk)
2397 /* Copy shared decls. */
2398 for (t = BLOCK_VARS (blk); t; t = TREE_CHAIN (t))
2399 if (DECL_RTL_SET_P (t))
2400 SET_DECL_RTL (t, copy_rtx_if_shared (DECL_RTL (t)));
2402 /* Now process sub-blocks. */
2403 for (t = BLOCK_SUBBLOCKS (blk); t; t = TREE_CHAIN (t))
2404 unshare_all_decls (t);
2407 /* Go through all virtual stack slots of a function and mark them as
2410 reset_used_decls (tree blk)
2415 for (t = BLOCK_VARS (blk); t; t = TREE_CHAIN (t))
2416 if (DECL_RTL_SET_P (t))
2417 reset_used_flags (DECL_RTL (t));
2419 /* Now process sub-blocks. */
2420 for (t = BLOCK_SUBBLOCKS (blk); t; t = TREE_CHAIN (t))
2421 reset_used_decls (t);
2424 /* Mark ORIG as in use, and return a copy of it if it was already in use.
2425 Recursively does the same for subexpressions. Uses
2426 copy_rtx_if_shared_1 to reduce stack space. */
2429 copy_rtx_if_shared (rtx orig)
2431 copy_rtx_if_shared_1 (&orig);
2435 /* Mark *ORIG1 as in use, and set it to a copy of it if it was already in
2436 use. Recursively does the same for subexpressions. */
2439 copy_rtx_if_shared_1 (rtx *orig1)
2445 const char *format_ptr;
2449 /* Repeat is used to turn tail-recursion into iteration. */
2456 code = GET_CODE (x);
2458 /* These types may be freely shared. */
2472 /* SCRATCH must be shared because they represent distinct values. */
2475 if (REG_P (XEXP (x, 0)) && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)
2480 /* CONST can be shared if it contains a SYMBOL_REF. If it contains
2481 a LABEL_REF, it isn't sharable. */
2482 if (GET_CODE (XEXP (x, 0)) == PLUS
2483 && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF
2484 && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT)
2493 /* The chain of insns is not being copied. */
2500 /* This rtx may not be shared. If it has already been seen,
2501 replace it with a copy of itself. */
2503 if (RTX_FLAG (x, used))
2507 copy = rtx_alloc (code);
2508 memcpy (copy, x, RTX_SIZE (code));
2512 RTX_FLAG (x, used) = 1;
2514 /* Now scan the subexpressions recursively.
2515 We can store any replaced subexpressions directly into X
2516 since we know X is not shared! Any vectors in X
2517 must be copied if X was copied. */
2519 format_ptr = GET_RTX_FORMAT (code);
2520 length = GET_RTX_LENGTH (code);
2523 for (i = 0; i < length; i++)
2525 switch (*format_ptr++)
2529 copy_rtx_if_shared_1 (last_ptr);
2530 last_ptr = &XEXP (x, i);
2534 if (XVEC (x, i) != NULL)
2537 int len = XVECLEN (x, i);
2539 /* Copy the vector iff I copied the rtx and the length
2541 if (copied && len > 0)
2542 XVEC (x, i) = gen_rtvec_v (len, XVEC (x, i)->elem);
2544 /* Call recursively on all inside the vector. */
2545 for (j = 0; j < len; j++)
2548 copy_rtx_if_shared_1 (last_ptr);
2549 last_ptr = &XVECEXP (x, i, j);
2564 /* Clear all the USED bits in X to allow copy_rtx_if_shared to be used
2565 to look for shared sub-parts. */
2568 reset_used_flags (rtx x)
2572 const char *format_ptr;
2575 /* Repeat is used to turn tail-recursion into iteration. */
2580 code = GET_CODE (x);
2582 /* These types may be freely shared so we needn't do any resetting
2603 /* The chain of insns is not being copied. */
2610 RTX_FLAG (x, used) = 0;
2612 format_ptr = GET_RTX_FORMAT (code);
2613 length = GET_RTX_LENGTH (code);
2615 for (i = 0; i < length; i++)
2617 switch (*format_ptr++)
2625 reset_used_flags (XEXP (x, i));
2629 for (j = 0; j < XVECLEN (x, i); j++)
2630 reset_used_flags (XVECEXP (x, i, j));
2636 /* Set all the USED bits in X to allow copy_rtx_if_shared to be used
2637 to look for shared sub-parts. */
2640 set_used_flags (rtx x)
2644 const char *format_ptr;
2649 code = GET_CODE (x);
2651 /* These types may be freely shared so we needn't do any resetting
2672 /* The chain of insns is not being copied. */
2679 RTX_FLAG (x, used) = 1;
2681 format_ptr = GET_RTX_FORMAT (code);
2682 for (i = 0; i < GET_RTX_LENGTH (code); i++)
2684 switch (*format_ptr++)
2687 set_used_flags (XEXP (x, i));
2691 for (j = 0; j < XVECLEN (x, i); j++)
2692 set_used_flags (XVECEXP (x, i, j));
2698 /* Copy X if necessary so that it won't be altered by changes in OTHER.
2699 Return X or the rtx for the pseudo reg the value of X was copied into.
2700 OTHER must be valid as a SET_DEST. */
2703 make_safe_from (rtx x, rtx other)
2706 switch (GET_CODE (other))
2709 other = SUBREG_REG (other);
2711 case STRICT_LOW_PART:
2714 other = XEXP (other, 0);
2723 && GET_CODE (x) != SUBREG)
2725 && (REGNO (other) < FIRST_PSEUDO_REGISTER
2726 || reg_mentioned_p (other, x))))
2728 rtx temp = gen_reg_rtx (GET_MODE (x));
2729 emit_move_insn (temp, x);
2735 /* Emission of insns (adding them to the doubly-linked list). */
2737 /* Return the first insn of the current sequence or current function. */
2745 /* Specify a new insn as the first in the chain. */
2748 set_first_insn (rtx insn)
2750 gcc_assert (!PREV_INSN (insn));
2754 /* Return the last insn emitted in current sequence or current function. */
2757 get_last_insn (void)
2762 /* Specify a new insn as the last in the chain. */
2765 set_last_insn (rtx insn)
2767 gcc_assert (!NEXT_INSN (insn));
2771 /* Return the last insn emitted, even if it is in a sequence now pushed. */
2774 get_last_insn_anywhere (void)
2776 struct sequence_stack *stack;
2779 for (stack = seq_stack; stack; stack = stack->next)
2780 if (stack->last != 0)
2785 /* Return the first nonnote insn emitted in current sequence or current
2786 function. This routine looks inside SEQUENCEs. */
2789 get_first_nonnote_insn (void)
2793 for (insn = first_insn; insn && NOTE_P (insn); insn = next_insn (insn));
2797 /* Return the last nonnote insn emitted in current sequence or current
2798 function. This routine looks inside SEQUENCEs. */
2801 get_last_nonnote_insn (void)
2805 for (insn = last_insn; insn && NOTE_P (insn); insn = previous_insn (insn));
2809 /* Return a number larger than any instruction's uid in this function. */
2814 return cur_insn_uid;
2817 /* Renumber instructions so that no instruction UIDs are wasted. */
2820 renumber_insns (FILE *stream)
2824 /* If we're not supposed to renumber instructions, don't. */
2825 if (!flag_renumber_insns)
2828 /* If there aren't that many instructions, then it's not really
2829 worth renumbering them. */
2830 if (flag_renumber_insns == 1 && get_max_uid () < 25000)
2835 for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
2838 fprintf (stream, "Renumbering insn %d to %d\n",
2839 INSN_UID (insn), cur_insn_uid);
2840 INSN_UID (insn) = cur_insn_uid++;
2844 /* Return the next insn. If it is a SEQUENCE, return the first insn
2848 next_insn (rtx insn)
2852 insn = NEXT_INSN (insn);
2853 if (insn && NONJUMP_INSN_P (insn)
2854 && GET_CODE (PATTERN (insn)) == SEQUENCE)
2855 insn = XVECEXP (PATTERN (insn), 0, 0);
2861 /* Return the previous insn. If it is a SEQUENCE, return the last insn
2865 previous_insn (rtx insn)
2869 insn = PREV_INSN (insn);
2870 if (insn && NONJUMP_INSN_P (insn)
2871 && GET_CODE (PATTERN (insn)) == SEQUENCE)
2872 insn = XVECEXP (PATTERN (insn), 0, XVECLEN (PATTERN (insn), 0) - 1);
2878 /* Return the next insn after INSN that is not a NOTE. This routine does not
2879 look inside SEQUENCEs. */
2882 next_nonnote_insn (rtx insn)
2886 insn = NEXT_INSN (insn);
2887 if (insn == 0 || !NOTE_P (insn))
2894 /* Return the previous insn before INSN that is not a NOTE. This routine does
2895 not look inside SEQUENCEs. */
2898 prev_nonnote_insn (rtx insn)
2902 insn = PREV_INSN (insn);
2903 if (insn == 0 || !NOTE_P (insn))
2910 /* Return the next INSN, CALL_INSN or JUMP_INSN after INSN;
2911 or 0, if there is none. This routine does not look inside
2915 next_real_insn (rtx insn)
2919 insn = NEXT_INSN (insn);
2920 if (insn == 0 || INSN_P (insn))
2927 /* Return the last INSN, CALL_INSN or JUMP_INSN before INSN;
2928 or 0, if there is none. This routine does not look inside
2932 prev_real_insn (rtx insn)
2936 insn = PREV_INSN (insn);
2937 if (insn == 0 || INSN_P (insn))
2944 /* Return the last CALL_INSN in the current list, or 0 if there is none.
2945 This routine does not look inside SEQUENCEs. */
2948 last_call_insn (void)
2952 for (insn = get_last_insn ();
2953 insn && !CALL_P (insn);
2954 insn = PREV_INSN (insn))
2960 /* Find the next insn after INSN that really does something. This routine
2961 does not look inside SEQUENCEs. Until reload has completed, this is the
2962 same as next_real_insn. */
2965 active_insn_p (rtx insn)
2967 return (CALL_P (insn) || JUMP_P (insn)
2968 || (NONJUMP_INSN_P (insn)
2969 && (! reload_completed
2970 || (GET_CODE (PATTERN (insn)) != USE
2971 && GET_CODE (PATTERN (insn)) != CLOBBER))));
2975 next_active_insn (rtx insn)
2979 insn = NEXT_INSN (insn);
2980 if (insn == 0 || active_insn_p (insn))
2987 /* Find the last insn before INSN that really does something. This routine
2988 does not look inside SEQUENCEs. Until reload has completed, this is the
2989 same as prev_real_insn. */
2992 prev_active_insn (rtx insn)
2996 insn = PREV_INSN (insn);
2997 if (insn == 0 || active_insn_p (insn))
3004 /* Return the next CODE_LABEL after the insn INSN, or 0 if there is none. */
3007 next_label (rtx insn)
3011 insn = NEXT_INSN (insn);
3012 if (insn == 0 || LABEL_P (insn))
3019 /* Return the last CODE_LABEL before the insn INSN, or 0 if there is none. */
3022 prev_label (rtx insn)
3026 insn = PREV_INSN (insn);
3027 if (insn == 0 || LABEL_P (insn))
3034 /* Return the last label to mark the same position as LABEL. Return null
3035 if LABEL itself is null. */
3038 skip_consecutive_labels (rtx label)
3042 for (insn = label; insn != 0 && !INSN_P (insn); insn = NEXT_INSN (insn))
3050 /* INSN uses CC0 and is being moved into a delay slot. Set up REG_CC_SETTER
3051 and REG_CC_USER notes so we can find it. */
3054 link_cc0_insns (rtx insn)
3056 rtx user = next_nonnote_insn (insn);
3058 if (NONJUMP_INSN_P (user) && GET_CODE (PATTERN (user)) == SEQUENCE)
3059 user = XVECEXP (PATTERN (user), 0, 0);
3061 REG_NOTES (user) = gen_rtx_INSN_LIST (REG_CC_SETTER, insn,
3063 REG_NOTES (insn) = gen_rtx_INSN_LIST (REG_CC_USER, user, REG_NOTES (insn));
3066 /* Return the next insn that uses CC0 after INSN, which is assumed to
3067 set it. This is the inverse of prev_cc0_setter (i.e., prev_cc0_setter
3068 applied to the result of this function should yield INSN).
3070 Normally, this is simply the next insn. However, if a REG_CC_USER note
3071 is present, it contains the insn that uses CC0.
3073 Return 0 if we can't find the insn. */
3076 next_cc0_user (rtx insn)
3078 rtx note = find_reg_note (insn, REG_CC_USER, NULL_RTX);
3081 return XEXP (note, 0);
3083 insn = next_nonnote_insn (insn);
3084 if (insn && NONJUMP_INSN_P (insn) && GET_CODE (PATTERN (insn)) == SEQUENCE)
3085 insn = XVECEXP (PATTERN (insn), 0, 0);
3087 if (insn && INSN_P (insn) && reg_mentioned_p (cc0_rtx, PATTERN (insn)))
3093 /* Find the insn that set CC0 for INSN. Unless INSN has a REG_CC_SETTER
3094 note, it is the previous insn. */
3097 prev_cc0_setter (rtx insn)
3099 rtx note = find_reg_note (insn, REG_CC_SETTER, NULL_RTX);
3102 return XEXP (note, 0);
3104 insn = prev_nonnote_insn (insn);
3105 gcc_assert (sets_cc0_p (PATTERN (insn)));
3111 /* Increment the label uses for all labels present in rtx. */
3114 mark_label_nuses (rtx x)
3120 code = GET_CODE (x);
3121 if (code == LABEL_REF && LABEL_P (XEXP (x, 0)))
3122 LABEL_NUSES (XEXP (x, 0))++;
3124 fmt = GET_RTX_FORMAT (code);
3125 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
3128 mark_label_nuses (XEXP (x, i));
3129 else if (fmt[i] == 'E')
3130 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
3131 mark_label_nuses (XVECEXP (x, i, j));
3136 /* Try splitting insns that can be split for better scheduling.
3137 PAT is the pattern which might split.
3138 TRIAL is the insn providing PAT.
3139 LAST is nonzero if we should return the last insn of the sequence produced.
3141 If this routine succeeds in splitting, it returns the first or last
3142 replacement insn depending on the value of LAST. Otherwise, it
3143 returns TRIAL. If the insn to be returned can be split, it will be. */
3146 try_split (rtx pat, rtx trial, int last)
3148 rtx before = PREV_INSN (trial);
3149 rtx after = NEXT_INSN (trial);
3150 int has_barrier = 0;
3154 rtx insn_last, insn;
3157 if (any_condjump_p (trial)
3158 && (note = find_reg_note (trial, REG_BR_PROB, 0)))
3159 split_branch_probability = INTVAL (XEXP (note, 0));
3160 probability = split_branch_probability;
3162 seq = split_insns (pat, trial);
3164 split_branch_probability = -1;
3166 /* If we are splitting a JUMP_INSN, it might be followed by a BARRIER.
3167 We may need to handle this specially. */
3168 if (after && BARRIER_P (after))
3171 after = NEXT_INSN (after);
3177 /* Avoid infinite loop if any insn of the result matches
3178 the original pattern. */
3182 if (INSN_P (insn_last)
3183 && rtx_equal_p (PATTERN (insn_last), pat))
3185 if (!NEXT_INSN (insn_last))
3187 insn_last = NEXT_INSN (insn_last);
3191 for (insn = insn_last; insn ; insn = PREV_INSN (insn))
3195 mark_jump_label (PATTERN (insn), insn, 0);
3197 if (probability != -1
3198 && any_condjump_p (insn)
3199 && !find_reg_note (insn, REG_BR_PROB, 0))
3201 /* We can preserve the REG_BR_PROB notes only if exactly
3202 one jump is created, otherwise the machine description
3203 is responsible for this step using
3204 split_branch_probability variable. */
3205 gcc_assert (njumps == 1);
3207 = gen_rtx_EXPR_LIST (REG_BR_PROB,
3208 GEN_INT (probability),
3214 /* If we are splitting a CALL_INSN, look for the CALL_INSN
3215 in SEQ and copy our CALL_INSN_FUNCTION_USAGE to it. */
3218 for (insn = insn_last; insn ; insn = PREV_INSN (insn))
3221 rtx *p = &CALL_INSN_FUNCTION_USAGE (insn);
3224 *p = CALL_INSN_FUNCTION_USAGE (trial);
3225 SIBLING_CALL_P (insn) = SIBLING_CALL_P (trial);
3229 /* Copy notes, particularly those related to the CFG. */
3230 for (note = REG_NOTES (trial); note; note = XEXP (note, 1))
3232 switch (REG_NOTE_KIND (note))
3236 while (insn != NULL_RTX)
3239 || (flag_non_call_exceptions && INSN_P (insn)
3240 && may_trap_p (PATTERN (insn))))
3242 = gen_rtx_EXPR_LIST (REG_EH_REGION,
3245 insn = PREV_INSN (insn);
3251 case REG_ALWAYS_RETURN:
3253 while (insn != NULL_RTX)
3257 = gen_rtx_EXPR_LIST (REG_NOTE_KIND (note),
3260 insn = PREV_INSN (insn);
3264 case REG_NON_LOCAL_GOTO:
3266 while (insn != NULL_RTX)
3270 = gen_rtx_EXPR_LIST (REG_NOTE_KIND (note),
3273 insn = PREV_INSN (insn);
3282 /* If there are LABELS inside the split insns increment the
3283 usage count so we don't delete the label. */
3284 if (NONJUMP_INSN_P (trial))
3287 while (insn != NULL_RTX)
3289 if (NONJUMP_INSN_P (insn))
3290 mark_label_nuses (PATTERN (insn));
3292 insn = PREV_INSN (insn);
3296 tem = emit_insn_after_setloc (seq, trial, INSN_LOCATOR (trial));
3298 delete_insn (trial);
3300 emit_barrier_after (tem);
3302 /* Recursively call try_split for each new insn created; by the
3303 time control returns here that insn will be fully split, so
3304 set LAST and continue from the insn after the one returned.
3305 We can't use next_active_insn here since AFTER may be a note.
3306 Ignore deleted insns, which can be occur if not optimizing. */
3307 for (tem = NEXT_INSN (before); tem != after; tem = NEXT_INSN (tem))
3308 if (! INSN_DELETED_P (tem) && INSN_P (tem))
3309 tem = try_split (PATTERN (tem), tem, 1);
3311 /* Return either the first or the last insn, depending on which was
3314 ? (after ? PREV_INSN (after) : last_insn)
3315 : NEXT_INSN (before);
3318 /* Make and return an INSN rtx, initializing all its slots.
3319 Store PATTERN in the pattern slots. */
3322 make_insn_raw (rtx pattern)
3326 insn = rtx_alloc (INSN);
3328 INSN_UID (insn) = cur_insn_uid++;
3329 PATTERN (insn) = pattern;
3330 INSN_CODE (insn) = -1;
3331 LOG_LINKS (insn) = NULL;
3332 REG_NOTES (insn) = NULL;
3333 INSN_LOCATOR (insn) = 0;
3334 BLOCK_FOR_INSN (insn) = NULL;
3336 #ifdef ENABLE_RTL_CHECKING
3339 && (returnjump_p (insn)
3340 || (GET_CODE (insn) == SET
3341 && SET_DEST (insn) == pc_rtx)))
3343 warning ("ICE: emit_insn used where emit_jump_insn needed:\n");
3351 /* Like `make_insn_raw' but make a JUMP_INSN instead of an insn. */
3354 make_jump_insn_raw (rtx pattern)
3358 insn = rtx_alloc (JUMP_INSN);
3359 INSN_UID (insn) = cur_insn_uid++;
3361 PATTERN (insn) = pattern;
3362 INSN_CODE (insn) = -1;
3363 LOG_LINKS (insn) = NULL;
3364 REG_NOTES (insn) = NULL;
3365 JUMP_LABEL (insn) = NULL;
3366 INSN_LOCATOR (insn) = 0;
3367 BLOCK_FOR_INSN (insn) = NULL;
3372 /* Like `make_insn_raw' but make a CALL_INSN instead of an insn. */
3375 make_call_insn_raw (rtx pattern)
3379 insn = rtx_alloc (CALL_INSN);
3380 INSN_UID (insn) = cur_insn_uid++;
3382 PATTERN (insn) = pattern;
3383 INSN_CODE (insn) = -1;
3384 LOG_LINKS (insn) = NULL;
3385 REG_NOTES (insn) = NULL;
3386 CALL_INSN_FUNCTION_USAGE (insn) = NULL;
3387 INSN_LOCATOR (insn) = 0;
3388 BLOCK_FOR_INSN (insn) = NULL;
3393 /* Add INSN to the end of the doubly-linked list.
3394 INSN may be an INSN, JUMP_INSN, CALL_INSN, CODE_LABEL, BARRIER or NOTE. */
3399 PREV_INSN (insn) = last_insn;
3400 NEXT_INSN (insn) = 0;
3402 if (NULL != last_insn)
3403 NEXT_INSN (last_insn) = insn;
3405 if (NULL == first_insn)
3411 /* Add INSN into the doubly-linked list after insn AFTER. This and
3412 the next should be the only functions called to insert an insn once
3413 delay slots have been filled since only they know how to update a
3417 add_insn_after (rtx insn, rtx after)
3419 rtx next = NEXT_INSN (after);
3422 gcc_assert (!optimize || !INSN_DELETED_P (after));
3424 NEXT_INSN (insn) = next;
3425 PREV_INSN (insn) = after;
3429 PREV_INSN (next) = insn;
3430 if (NONJUMP_INSN_P (next) && GET_CODE (PATTERN (next)) == SEQUENCE)
3431 PREV_INSN (XVECEXP (PATTERN (next), 0, 0)) = insn;
3433 else if (last_insn == after)
3437 struct sequence_stack *stack = seq_stack;
3438 /* Scan all pending sequences too. */
3439 for (; stack; stack = stack->next)
3440 if (after == stack->last)
3449 if (!BARRIER_P (after)
3450 && !BARRIER_P (insn)
3451 && (bb = BLOCK_FOR_INSN (after)))
3453 set_block_for_insn (insn, bb);
3455 bb->flags |= BB_DIRTY;
3456 /* Should not happen as first in the BB is always
3457 either NOTE or LABEL. */
3458 if (BB_END (bb) == after
3459 /* Avoid clobbering of structure when creating new BB. */
3460 && !BARRIER_P (insn)
3462 || NOTE_LINE_NUMBER (insn) != NOTE_INSN_BASIC_BLOCK))
3466 NEXT_INSN (after) = insn;
3467 if (NONJUMP_INSN_P (after) && GET_CODE (PATTERN (after)) == SEQUENCE)
3469 rtx sequence = PATTERN (after);
3470 NEXT_INSN (XVECEXP (sequence, 0, XVECLEN (sequence, 0) - 1)) = insn;
3474 /* Add INSN into the doubly-linked list before insn BEFORE. This and
3475 the previous should be the only functions called to insert an insn once
3476 delay slots have been filled since only they know how to update a
3480 add_insn_before (rtx insn, rtx before)
3482 rtx prev = PREV_INSN (before);
3485 gcc_assert (!optimize || !INSN_DELETED_P (before));
3487 PREV_INSN (insn) = prev;
3488 NEXT_INSN (insn) = before;
3492 NEXT_INSN (prev) = insn;
3493 if (NONJUMP_INSN_P (prev) && GET_CODE (PATTERN (prev)) == SEQUENCE)
3495 rtx sequence = PATTERN (prev);
3496 NEXT_INSN (XVECEXP (sequence, 0, XVECLEN (sequence, 0) - 1)) = insn;
3499 else if (first_insn == before)
3503 struct sequence_stack *stack = seq_stack;
3504 /* Scan all pending sequences too. */
3505 for (; stack; stack = stack->next)
3506 if (before == stack->first)
3508 stack->first = insn;
3515 if (!BARRIER_P (before)
3516 && !BARRIER_P (insn)
3517 && (bb = BLOCK_FOR_INSN (before)))
3519 set_block_for_insn (insn, bb);
3521 bb->flags |= BB_DIRTY;
3522 /* Should not happen as first in the BB is always either NOTE or
3524 gcc_assert (BB_HEAD (bb) != insn
3525 /* Avoid clobbering of structure when creating new BB. */
3528 && NOTE_LINE_NUMBER (insn) == NOTE_INSN_BASIC_BLOCK));
3531 PREV_INSN (before) = insn;
3532 if (NONJUMP_INSN_P (before) && GET_CODE (PATTERN (before)) == SEQUENCE)
3533 PREV_INSN (XVECEXP (PATTERN (before), 0, 0)) = insn;
3536 /* Remove an insn from its doubly-linked list. This function knows how
3537 to handle sequences. */
3539 remove_insn (rtx insn)
3541 rtx next = NEXT_INSN (insn);
3542 rtx prev = PREV_INSN (insn);
3547 NEXT_INSN (prev) = next;
3548 if (NONJUMP_INSN_P (prev) && GET_CODE (PATTERN (prev)) == SEQUENCE)
3550 rtx sequence = PATTERN (prev);
3551 NEXT_INSN (XVECEXP (sequence, 0, XVECLEN (sequence, 0) - 1)) = next;
3554 else if (first_insn == insn)
3558 struct sequence_stack *stack = seq_stack;
3559 /* Scan all pending sequences too. */
3560 for (; stack; stack = stack->next)
3561 if (insn == stack->first)
3563 stack->first = next;
3572 PREV_INSN (next) = prev;
3573 if (NONJUMP_INSN_P (next) && GET_CODE (PATTERN (next)) == SEQUENCE)
3574 PREV_INSN (XVECEXP (PATTERN (next), 0, 0)) = prev;
3576 else if (last_insn == insn)
3580 struct sequence_stack *stack = seq_stack;
3581 /* Scan all pending sequences too. */
3582 for (; stack; stack = stack->next)
3583 if (insn == stack->last)
3591 if (!BARRIER_P (insn)
3592 && (bb = BLOCK_FOR_INSN (insn)))
3595 bb->flags |= BB_DIRTY;
3596 if (BB_HEAD (bb) == insn)
3598 /* Never ever delete the basic block note without deleting whole
3600 gcc_assert (!NOTE_P (insn));
3601 BB_HEAD (bb) = next;
3603 if (BB_END (bb) == insn)
3608 /* Append CALL_FUSAGE to the CALL_INSN_FUNCTION_USAGE for CALL_INSN. */
3611 add_function_usage_to (rtx call_insn, rtx call_fusage)
3613 gcc_assert (call_insn && CALL_P (call_insn));
3615 /* Put the register usage information on the CALL. If there is already
3616 some usage information, put ours at the end. */
3617 if (CALL_INSN_FUNCTION_USAGE (call_insn))
3621 for (link = CALL_INSN_FUNCTION_USAGE (call_insn); XEXP (link, 1) != 0;
3622 link = XEXP (link, 1))
3625 XEXP (link, 1) = call_fusage;
3628 CALL_INSN_FUNCTION_USAGE (call_insn) = call_fusage;
3631 /* Delete all insns made since FROM.
3632 FROM becomes the new last instruction. */
3635 delete_insns_since (rtx from)
3640 NEXT_INSN (from) = 0;
3644 /* This function is deprecated, please use sequences instead.
3646 Move a consecutive bunch of insns to a different place in the chain.
3647 The insns to be moved are those between FROM and TO.
3648 They are moved to a new position after the insn AFTER.
3649 AFTER must not be FROM or TO or any insn in between.
3651 This function does not know about SEQUENCEs and hence should not be
3652 called after delay-slot filling has been done. */
3655 reorder_insns_nobb (rtx from, rtx to, rtx after)
3657 /* Splice this bunch out of where it is now. */
3658 if (PREV_INSN (from))
3659 NEXT_INSN (PREV_INSN (from)) = NEXT_INSN (to);
3661 PREV_INSN (NEXT_INSN (to)) = PREV_INSN (from);
3662 if (last_insn == to)
3663 last_insn = PREV_INSN (from);
3664 if (first_insn == from)
3665 first_insn = NEXT_INSN (to);
3667 /* Make the new neighbors point to it and it to them. */
3668 if (NEXT_INSN (after))
3669 PREV_INSN (NEXT_INSN (after)) = to;
3671 NEXT_INSN (to) = NEXT_INSN (after);
3672 PREV_INSN (from) = after;
3673 NEXT_INSN (after) = from;
3674 if (after == last_insn)
3678 /* Same as function above, but take care to update BB boundaries. */
3680 reorder_insns (rtx from, rtx to, rtx after)
3682 rtx prev = PREV_INSN (from);
3683 basic_block bb, bb2;
3685 reorder_insns_nobb (from, to, after);
3687 if (!BARRIER_P (after)
3688 && (bb = BLOCK_FOR_INSN (after)))
3691 bb->flags |= BB_DIRTY;
3693 if (!BARRIER_P (from)
3694 && (bb2 = BLOCK_FOR_INSN (from)))
3696 if (BB_END (bb2) == to)
3697 BB_END (bb2) = prev;
3698 bb2->flags |= BB_DIRTY;
3701 if (BB_END (bb) == after)
3704 for (x = from; x != NEXT_INSN (to); x = NEXT_INSN (x))
3706 set_block_for_insn (x, bb);
3710 /* Return the line note insn preceding INSN. */
3713 find_line_note (rtx insn)
3715 if (no_line_numbers)
3718 for (; insn; insn = PREV_INSN (insn))
3720 && NOTE_LINE_NUMBER (insn) >= 0)
3726 /* Remove unnecessary notes from the instruction stream. */
3729 remove_unnecessary_notes (void)
3731 rtx eh_stack = NULL_RTX;
3736 /* We must not remove the first instruction in the function because
3737 the compiler depends on the first instruction being a note. */
3738 for (insn = NEXT_INSN (get_insns ()); insn; insn = next)
3740 /* Remember what's next. */
3741 next = NEXT_INSN (insn);
3743 /* We're only interested in notes. */
3747 switch (NOTE_LINE_NUMBER (insn))
3749 case NOTE_INSN_DELETED:
3753 case NOTE_INSN_EH_REGION_BEG:
3754 eh_stack = alloc_INSN_LIST (insn, eh_stack);
3757 case NOTE_INSN_EH_REGION_END:
3758 /* Too many end notes. */
3759 gcc_assert (eh_stack);
3760 /* Mismatched nesting. */
3761 gcc_assert (NOTE_EH_HANDLER (XEXP (eh_stack, 0))
3762 == NOTE_EH_HANDLER (insn));
3764 eh_stack = XEXP (eh_stack, 1);
3765 free_INSN_LIST_node (tmp);
3768 case NOTE_INSN_BLOCK_BEG:
3769 case NOTE_INSN_BLOCK_END:
3770 /* BLOCK_END and BLOCK_BEG notes only exist in the `final' pass. */
3778 /* Too many EH_REGION_BEG notes. */
3779 gcc_assert (!eh_stack);
3783 /* Emit insn(s) of given code and pattern
3784 at a specified place within the doubly-linked list.
3786 All of the emit_foo global entry points accept an object
3787 X which is either an insn list or a PATTERN of a single
3790 There are thus a few canonical ways to generate code and
3791 emit it at a specific place in the instruction stream. For
3792 example, consider the instruction named SPOT and the fact that
3793 we would like to emit some instructions before SPOT. We might
3797 ... emit the new instructions ...
3798 insns_head = get_insns ();
3801 emit_insn_before (insns_head, SPOT);
3803 It used to be common to generate SEQUENCE rtl instead, but that
3804 is a relic of the past which no longer occurs. The reason is that
3805 SEQUENCE rtl results in much fragmented RTL memory since the SEQUENCE
3806 generated would almost certainly die right after it was created. */
3808 /* Make X be output before the instruction BEFORE. */
3811 emit_insn_before_noloc (rtx x, rtx before)
3816 gcc_assert (before);
3821 switch (GET_CODE (x))
3832 rtx next = NEXT_INSN (insn);
3833 add_insn_before (insn, before);
3839 #ifdef ENABLE_RTL_CHECKING
3846 last = make_insn_raw (x);
3847 add_insn_before (last, before);
3854 /* Make an instruction with body X and code JUMP_INSN
3855 and output it before the instruction BEFORE. */
3858 emit_jump_insn_before_noloc (rtx x, rtx before)
3860 rtx insn, last = NULL_RTX;
3862 gcc_assert (before);
3864 switch (GET_CODE (x))
3875 rtx next = NEXT_INSN (insn);
3876 add_insn_before (insn, before);
3882 #ifdef ENABLE_RTL_CHECKING
3889 last = make_jump_insn_raw (x);
3890 add_insn_before (last, before);
3897 /* Make an instruction with body X and code CALL_INSN
3898 and output it before the instruction BEFORE. */
3901 emit_call_insn_before_noloc (rtx x, rtx before)
3903 rtx last = NULL_RTX, insn;
3905 gcc_assert (before);
3907 switch (GET_CODE (x))
3918 rtx next = NEXT_INSN (insn);
3919 add_insn_before (insn, before);
3925 #ifdef ENABLE_RTL_CHECKING
3932 last = make_call_insn_raw (x);
3933 add_insn_before (last, before);
3940 /* Make an insn of code BARRIER
3941 and output it before the insn BEFORE. */
3944 emit_barrier_before (rtx before)
3946 rtx insn = rtx_alloc (BARRIER);
3948 INSN_UID (insn) = cur_insn_uid++;
3950 add_insn_before (insn, before);
3954 /* Emit the label LABEL before the insn BEFORE. */
3957 emit_label_before (rtx label, rtx before)
3959 /* This can be called twice for the same label as a result of the
3960 confusion that follows a syntax error! So make it harmless. */
3961 if (INSN_UID (label) == 0)
3963 INSN_UID (label) = cur_insn_uid++;
3964 add_insn_before (label, before);
3970 /* Emit a note of subtype SUBTYPE before the insn BEFORE. */
3973 emit_note_before (int subtype, rtx before)
3975 rtx note = rtx_alloc (NOTE);
3976 INSN_UID (note) = cur_insn_uid++;
3977 #ifndef USE_MAPPED_LOCATION
3978 NOTE_SOURCE_FILE (note) = 0;
3980 NOTE_LINE_NUMBER (note) = subtype;
3981 BLOCK_FOR_INSN (note) = NULL;
3983 add_insn_before (note, before);
3987 /* Helper for emit_insn_after, handles lists of instructions
3990 static rtx emit_insn_after_1 (rtx, rtx);
3993 emit_insn_after_1 (rtx first, rtx after)
3999 if (!BARRIER_P (after)
4000 && (bb = BLOCK_FOR_INSN (after)))
4002 bb->flags |= BB_DIRTY;
4003 for (last = first; NEXT_INSN (last); last = NEXT_INSN (last))
4004 if (!BARRIER_P (last))
4005 set_block_for_insn (last, bb);
4006 if (!BARRIER_P (last))
4007 set_block_for_insn (last, bb);
4008 if (BB_END (bb) == after)
4012 for (last = first; NEXT_INSN (last); last = NEXT_INSN (last))
4015 after_after = NEXT_INSN (after);
4017 NEXT_INSN (after) = first;
4018 PREV_INSN (first) = after;
4019 NEXT_INSN (last) = after_after;
4021 PREV_INSN (after_after) = last;
4023 if (after == last_insn)
4028 /* Make X be output after the insn AFTER. */
4031 emit_insn_after_noloc (rtx x, rtx after)
4040 switch (GET_CODE (x))
4048 last = emit_insn_after_1 (x, after);
4051 #ifdef ENABLE_RTL_CHECKING
4058 last = make_insn_raw (x);
4059 add_insn_after (last, after);
4066 /* Similar to emit_insn_after, except that line notes are to be inserted so
4067 as to act as if this insn were at FROM. */
4070 emit_insn_after_with_line_notes (rtx x, rtx after, rtx from)
4072 rtx from_line = find_line_note (from);
4073 rtx after_line = find_line_note (after);
4074 rtx insn = emit_insn_after (x, after);
4077 emit_note_copy_after (from_line, after);
4080 emit_note_copy_after (after_line, insn);
4083 /* Make an insn of code JUMP_INSN with body X
4084 and output it after the insn AFTER. */
4087 emit_jump_insn_after_noloc (rtx x, rtx after)
4093 switch (GET_CODE (x))
4101 last = emit_insn_after_1 (x, after);
4104 #ifdef ENABLE_RTL_CHECKING
4111 last = make_jump_insn_raw (x);
4112 add_insn_after (last, after);
4119 /* Make an instruction with body X and code CALL_INSN
4120 and output it after the instruction AFTER. */
4123 emit_call_insn_after_noloc (rtx x, rtx after)
4129 switch (GET_CODE (x))
4137 last = emit_insn_after_1 (x, after);
4140 #ifdef ENABLE_RTL_CHECKING
4147 last = make_call_insn_raw (x);
4148 add_insn_after (last, after);
4155 /* Make an insn of code BARRIER
4156 and output it after the insn AFTER. */
4159 emit_barrier_after (rtx after)
4161 rtx insn = rtx_alloc (BARRIER);
4163 INSN_UID (insn) = cur_insn_uid++;
4165 add_insn_after (insn, after);
4169 /* Emit the label LABEL after the insn AFTER. */
4172 emit_label_after (rtx label, rtx after)
4174 /* This can be called twice for the same label
4175 as a result of the confusion that follows a syntax error!
4176 So make it harmless. */
4177 if (INSN_UID (label) == 0)
4179 INSN_UID (label) = cur_insn_uid++;
4180 add_insn_after (label, after);
4186 /* Emit a note of subtype SUBTYPE after the insn AFTER. */
4189 emit_note_after (int subtype, rtx after)
4191 rtx note = rtx_alloc (NOTE);
4192 INSN_UID (note) = cur_insn_uid++;
4193 #ifndef USE_MAPPED_LOCATION
4194 NOTE_SOURCE_FILE (note) = 0;
4196 NOTE_LINE_NUMBER (note) = subtype;
4197 BLOCK_FOR_INSN (note) = NULL;
4198 add_insn_after (note, after);
4202 /* Emit a copy of note ORIG after the insn AFTER. */
4205 emit_note_copy_after (rtx orig, rtx after)
4209 if (NOTE_LINE_NUMBER (orig) >= 0 && no_line_numbers)
4215 note = rtx_alloc (NOTE);
4216 INSN_UID (note) = cur_insn_uid++;
4217 NOTE_LINE_NUMBER (note) = NOTE_LINE_NUMBER (orig);
4218 NOTE_DATA (note) = NOTE_DATA (orig);
4219 BLOCK_FOR_INSN (note) = NULL;
4220 add_insn_after (note, after);
4224 /* Like emit_insn_after_noloc, but set INSN_LOCATOR according to SCOPE. */
4226 emit_insn_after_setloc (rtx pattern, rtx after, int loc)
4228 rtx last = emit_insn_after_noloc (pattern, after);
4230 if (pattern == NULL_RTX || !loc)
4233 after = NEXT_INSN (after);
4236 if (active_insn_p (after) && !INSN_LOCATOR (after))
4237 INSN_LOCATOR (after) = loc;
4240 after = NEXT_INSN (after);
4245 /* Like emit_insn_after_noloc, but set INSN_LOCATOR according to AFTER. */
4247 emit_insn_after (rtx pattern, rtx after)
4250 return emit_insn_after_setloc (pattern, after, INSN_LOCATOR (after));
4252 return emit_insn_after_noloc (pattern, after);
4255 /* Like emit_jump_insn_after_noloc, but set INSN_LOCATOR according to SCOPE. */
4257 emit_jump_insn_after_setloc (rtx pattern, rtx after, int loc)
4259 rtx last = emit_jump_insn_after_noloc (pattern, after);
4261 if (pattern == NULL_RTX || !loc)
4264 after = NEXT_INSN (after);
4267 if (active_insn_p (after) && !INSN_LOCATOR (after))
4268 INSN_LOCATOR (after) = loc;
4271 after = NEXT_INSN (after);
4276 /* Like emit_jump_insn_after_noloc, but set INSN_LOCATOR according to AFTER. */
4278 emit_jump_insn_after (rtx pattern, rtx after)
4281 return emit_jump_insn_after_setloc (pattern, after, INSN_LOCATOR (after));
4283 return emit_jump_insn_after_noloc (pattern, after);
4286 /* Like emit_call_insn_after_noloc, but set INSN_LOCATOR according to SCOPE. */
4288 emit_call_insn_after_setloc (rtx pattern, rtx after, int loc)
4290 rtx last = emit_call_insn_after_noloc (pattern, after);
4292 if (pattern == NULL_RTX || !loc)
4295 after = NEXT_INSN (after);
4298 if (active_insn_p (after) && !INSN_LOCATOR (after))
4299 INSN_LOCATOR (after) = loc;
4302 after = NEXT_INSN (after);
4307 /* Like emit_call_insn_after_noloc, but set INSN_LOCATOR according to AFTER. */
4309 emit_call_insn_after (rtx pattern, rtx after)
4312 return emit_call_insn_after_setloc (pattern, after, INSN_LOCATOR (after));
4314 return emit_call_insn_after_noloc (pattern, after);
4317 /* Like emit_insn_before_noloc, but set INSN_LOCATOR according to SCOPE. */
4319 emit_insn_before_setloc (rtx pattern, rtx before, int loc)
4321 rtx first = PREV_INSN (before);
4322 rtx last = emit_insn_before_noloc (pattern, before);
4324 if (pattern == NULL_RTX || !loc)
4327 first = NEXT_INSN (first);
4330 if (active_insn_p (first) && !INSN_LOCATOR (first))
4331 INSN_LOCATOR (first) = loc;
4334 first = NEXT_INSN (first);
4339 /* Like emit_insn_before_noloc, but set INSN_LOCATOR according to BEFORE. */
4341 emit_insn_before (rtx pattern, rtx before)
4343 if (INSN_P (before))
4344 return emit_insn_before_setloc (pattern, before, INSN_LOCATOR (before));
4346 return emit_insn_before_noloc (pattern, before);
4349 /* like emit_insn_before_noloc, but set insn_locator according to scope. */
4351 emit_jump_insn_before_setloc (rtx pattern, rtx before, int loc)
4353 rtx first = PREV_INSN (before);
4354 rtx last = emit_jump_insn_before_noloc (pattern, before);
4356 if (pattern == NULL_RTX)
4359 first = NEXT_INSN (first);
4362 if (active_insn_p (first) && !INSN_LOCATOR (first))
4363 INSN_LOCATOR (first) = loc;
4366 first = NEXT_INSN (first);
4371 /* Like emit_jump_insn_before_noloc, but set INSN_LOCATOR according to BEFORE. */
4373 emit_jump_insn_before (rtx pattern, rtx before)
4375 if (INSN_P (before))
4376 return emit_jump_insn_before_setloc (pattern, before, INSN_LOCATOR (before));
4378 return emit_jump_insn_before_noloc (pattern, before);
4381 /* like emit_insn_before_noloc, but set insn_locator according to scope. */
4383 emit_call_insn_before_setloc (rtx pattern, rtx before, int loc)
4385 rtx first = PREV_INSN (before);
4386 rtx last = emit_call_insn_before_noloc (pattern, before);
4388 if (pattern == NULL_RTX)
4391 first = NEXT_INSN (first);
4394 if (active_insn_p (first) && !INSN_LOCATOR (first))
4395 INSN_LOCATOR (first) = loc;
4398 first = NEXT_INSN (first);
4403 /* like emit_call_insn_before_noloc,
4404 but set insn_locator according to before. */
4406 emit_call_insn_before (rtx pattern, rtx before)
4408 if (INSN_P (before))
4409 return emit_call_insn_before_setloc (pattern, before, INSN_LOCATOR (before));
4411 return emit_call_insn_before_noloc (pattern, before);
4414 /* Take X and emit it at the end of the doubly-linked
4417 Returns the last insn emitted. */
4422 rtx last = last_insn;
4428 switch (GET_CODE (x))
4439 rtx next = NEXT_INSN (insn);
4446 #ifdef ENABLE_RTL_CHECKING
4453 last = make_insn_raw (x);
4461 /* Make an insn of code JUMP_INSN with pattern X
4462 and add it to the end of the doubly-linked list. */
4465 emit_jump_insn (rtx x)
4467 rtx last = NULL_RTX, insn;
4469 switch (GET_CODE (x))
4480 rtx next = NEXT_INSN (insn);
4487 #ifdef ENABLE_RTL_CHECKING
4494 last = make_jump_insn_raw (x);
4502 /* Make an insn of code CALL_INSN with pattern X
4503 and add it to the end of the doubly-linked list. */
4506 emit_call_insn (rtx x)
4510 switch (GET_CODE (x))
4518 insn = emit_insn (x);
4521 #ifdef ENABLE_RTL_CHECKING
4528 insn = make_call_insn_raw (x);
4536 /* Add the label LABEL to the end of the doubly-linked list. */
4539 emit_label (rtx label)
4541 /* This can be called twice for the same label
4542 as a result of the confusion that follows a syntax error!
4543 So make it harmless. */
4544 if (INSN_UID (label) == 0)
4546 INSN_UID (label) = cur_insn_uid++;
4552 /* Make an insn of code BARRIER
4553 and add it to the end of the doubly-linked list. */
4558 rtx barrier = rtx_alloc (BARRIER);
4559 INSN_UID (barrier) = cur_insn_uid++;
4564 /* Make line numbering NOTE insn for LOCATION add it to the end
4565 of the doubly-linked list, but only if line-numbers are desired for
4566 debugging info and it doesn't match the previous one. */
4569 emit_line_note (location_t location)
4573 #ifdef USE_MAPPED_LOCATION
4574 if (location == last_location)
4577 if (location.file && last_location.file
4578 && !strcmp (location.file, last_location.file)
4579 && location.line == last_location.line)
4582 last_location = location;
4584 if (no_line_numbers)
4590 #ifdef USE_MAPPED_LOCATION
4591 note = emit_note ((int) location);
4593 note = emit_note (location.line);
4594 NOTE_SOURCE_FILE (note) = location.file;
4600 /* Emit a copy of note ORIG. */
4603 emit_note_copy (rtx orig)
4607 if (NOTE_LINE_NUMBER (orig) >= 0 && no_line_numbers)
4613 note = rtx_alloc (NOTE);
4615 INSN_UID (note) = cur_insn_uid++;
4616 NOTE_DATA (note) = NOTE_DATA (orig);
4617 NOTE_LINE_NUMBER (note) = NOTE_LINE_NUMBER (orig);
4618 BLOCK_FOR_INSN (note) = NULL;
4624 /* Make an insn of code NOTE or type NOTE_NO
4625 and add it to the end of the doubly-linked list. */
4628 emit_note (int note_no)
4632 note = rtx_alloc (NOTE);
4633 INSN_UID (note) = cur_insn_uid++;
4634 NOTE_LINE_NUMBER (note) = note_no;
4635 memset (&NOTE_DATA (note), 0, sizeof (NOTE_DATA (note)));
4636 BLOCK_FOR_INSN (note) = NULL;
4641 /* Cause next statement to emit a line note even if the line number
4645 force_next_line_note (void)
4647 #ifdef USE_MAPPED_LOCATION
4650 last_location.line = -1;
4654 /* Place a note of KIND on insn INSN with DATUM as the datum. If a
4655 note of this type already exists, remove it first. */
4658 set_unique_reg_note (rtx insn, enum reg_note kind, rtx datum)
4660 rtx note = find_reg_note (insn, kind, NULL_RTX);
4666 /* Don't add REG_EQUAL/REG_EQUIV notes if the insn
4667 has multiple sets (some callers assume single_set
4668 means the insn only has one set, when in fact it
4669 means the insn only has one * useful * set). */
4670 if (GET_CODE (PATTERN (insn)) == PARALLEL && multiple_sets (insn))
4676 /* Don't add ASM_OPERAND REG_EQUAL/REG_EQUIV notes.
4677 It serves no useful purpose and breaks eliminate_regs. */
4678 if (GET_CODE (datum) == ASM_OPERANDS)
4688 XEXP (note, 0) = datum;
4692 REG_NOTES (insn) = gen_rtx_EXPR_LIST (kind, datum, REG_NOTES (insn));
4693 return REG_NOTES (insn);
4696 /* Return an indication of which type of insn should have X as a body.
4697 The value is CODE_LABEL, INSN, CALL_INSN or JUMP_INSN. */
4699 static enum rtx_code
4700 classify_insn (rtx x)
4704 if (GET_CODE (x) == CALL)
4706 if (GET_CODE (x) == RETURN)
4708 if (GET_CODE (x) == SET)
4710 if (SET_DEST (x) == pc_rtx)
4712 else if (GET_CODE (SET_SRC (x)) == CALL)
4717 if (GET_CODE (x) == PARALLEL)
4720 for (j = XVECLEN (x, 0) - 1; j >= 0; j--)
4721 if (GET_CODE (XVECEXP (x, 0, j)) == CALL)
4723 else if (GET_CODE (XVECEXP (x, 0, j)) == SET
4724 && SET_DEST (XVECEXP (x, 0, j)) == pc_rtx)
4726 else if (GET_CODE (XVECEXP (x, 0, j)) == SET
4727 && GET_CODE (SET_SRC (XVECEXP (x, 0, j))) == CALL)
4733 /* Emit the rtl pattern X as an appropriate kind of insn.
4734 If X is a label, it is simply added into the insn chain. */
4739 enum rtx_code code = classify_insn (x);
4744 return emit_label (x);
4746 return emit_insn (x);
4749 rtx insn = emit_jump_insn (x);
4750 if (any_uncondjump_p (insn) || GET_CODE (x) == RETURN)
4751 return emit_barrier ();
4755 return emit_call_insn (x);
4761 /* Space for free sequence stack entries. */
4762 static GTY ((deletable)) struct sequence_stack *free_sequence_stack;
4764 /* Begin emitting insns to a sequence. If this sequence will contain
4765 something that might cause the compiler to pop arguments to function
4766 calls (because those pops have previously been deferred; see
4767 INHIBIT_DEFER_POP for more details), use do_pending_stack_adjust
4768 before calling this function. That will ensure that the deferred
4769 pops are not accidentally emitted in the middle of this sequence. */
4772 start_sequence (void)
4774 struct sequence_stack *tem;
4776 if (free_sequence_stack != NULL)
4778 tem = free_sequence_stack;
4779 free_sequence_stack = tem->next;
4782 tem = ggc_alloc (sizeof (struct sequence_stack));
4784 tem->next = seq_stack;
4785 tem->first = first_insn;
4786 tem->last = last_insn;
4794 /* Set up the insn chain starting with FIRST as the current sequence,
4795 saving the previously current one. See the documentation for
4796 start_sequence for more information about how to use this function. */
4799 push_to_sequence (rtx first)
4805 for (last = first; last && NEXT_INSN (last); last = NEXT_INSN (last));
4811 /* Set up the outer-level insn chain
4812 as the current sequence, saving the previously current one. */
4815 push_topmost_sequence (void)
4817 struct sequence_stack *stack, *top = NULL;
4821 for (stack = seq_stack; stack; stack = stack->next)
4824 first_insn = top->first;
4825 last_insn = top->last;
4828 /* After emitting to the outer-level insn chain, update the outer-level
4829 insn chain, and restore the previous saved state. */
4832 pop_topmost_sequence (void)
4834 struct sequence_stack *stack, *top = NULL;
4836 for (stack = seq_stack; stack; stack = stack->next)
4839 top->first = first_insn;
4840 top->last = last_insn;
4845 /* After emitting to a sequence, restore previous saved state.
4847 To get the contents of the sequence just made, you must call
4848 `get_insns' *before* calling here.
4850 If the compiler might have deferred popping arguments while
4851 generating this sequence, and this sequence will not be immediately
4852 inserted into the instruction stream, use do_pending_stack_adjust
4853 before calling get_insns. That will ensure that the deferred
4854 pops are inserted into this sequence, and not into some random
4855 location in the instruction stream. See INHIBIT_DEFER_POP for more
4856 information about deferred popping of arguments. */
4861 struct sequence_stack *tem = seq_stack;
4863 first_insn = tem->first;
4864 last_insn = tem->last;
4865 seq_stack = tem->next;
4867 memset (tem, 0, sizeof (*tem));
4868 tem->next = free_sequence_stack;
4869 free_sequence_stack = tem;
4872 /* Return 1 if currently emitting into a sequence. */
4875 in_sequence_p (void)
4877 return seq_stack != 0;
4880 /* Put the various virtual registers into REGNO_REG_RTX. */
4883 init_virtual_regs (struct emit_status *es)
4885 rtx *ptr = es->x_regno_reg_rtx;
4886 ptr[VIRTUAL_INCOMING_ARGS_REGNUM] = virtual_incoming_args_rtx;
4887 ptr[VIRTUAL_STACK_VARS_REGNUM] = virtual_stack_vars_rtx;
4888 ptr[VIRTUAL_STACK_DYNAMIC_REGNUM] = virtual_stack_dynamic_rtx;
4889 ptr[VIRTUAL_OUTGOING_ARGS_REGNUM] = virtual_outgoing_args_rtx;
4890 ptr[VIRTUAL_CFA_REGNUM] = virtual_cfa_rtx;
4894 /* Used by copy_insn_1 to avoid copying SCRATCHes more than once. */
4895 static rtx copy_insn_scratch_in[MAX_RECOG_OPERANDS];
4896 static rtx copy_insn_scratch_out[MAX_RECOG_OPERANDS];
4897 static int copy_insn_n_scratches;
4899 /* When an insn is being copied by copy_insn_1, this is nonzero if we have
4900 copied an ASM_OPERANDS.
4901 In that case, it is the original input-operand vector. */
4902 static rtvec orig_asm_operands_vector;
4904 /* When an insn is being copied by copy_insn_1, this is nonzero if we have
4905 copied an ASM_OPERANDS.
4906 In that case, it is the copied input-operand vector. */
4907 static rtvec copy_asm_operands_vector;
4909 /* Likewise for the constraints vector. */
4910 static rtvec orig_asm_constraints_vector;
4911 static rtvec copy_asm_constraints_vector;
4913 /* Recursively create a new copy of an rtx for copy_insn.
4914 This function differs from copy_rtx in that it handles SCRATCHes and
4915 ASM_OPERANDs properly.
4916 Normally, this function is not used directly; use copy_insn as front end.
4917 However, you could first copy an insn pattern with copy_insn and then use
4918 this function afterwards to properly copy any REG_NOTEs containing
4922 copy_insn_1 (rtx orig)
4927 const char *format_ptr;
4929 code = GET_CODE (orig);
4943 if (REG_P (XEXP (orig, 0)) && REGNO (XEXP (orig, 0)) < FIRST_PSEUDO_REGISTER)
4948 for (i = 0; i < copy_insn_n_scratches; i++)
4949 if (copy_insn_scratch_in[i] == orig)
4950 return copy_insn_scratch_out[i];
4954 /* CONST can be shared if it contains a SYMBOL_REF. If it contains
4955 a LABEL_REF, it isn't sharable. */
4956 if (GET_CODE (XEXP (orig, 0)) == PLUS
4957 && GET_CODE (XEXP (XEXP (orig, 0), 0)) == SYMBOL_REF
4958 && GET_CODE (XEXP (XEXP (orig, 0), 1)) == CONST_INT)
4962 /* A MEM with a constant address is not sharable. The problem is that
4963 the constant address may need to be reloaded. If the mem is shared,
4964 then reloading one copy of this mem will cause all copies to appear
4965 to have been reloaded. */
4971 copy = rtx_alloc (code);
4973 /* Copy the various flags, and other information. We assume that
4974 all fields need copying, and then clear the fields that should
4975 not be copied. That is the sensible default behavior, and forces
4976 us to explicitly document why we are *not* copying a flag. */
4977 memcpy (copy, orig, RTX_HDR_SIZE);
4979 /* We do not copy the USED flag, which is used as a mark bit during
4980 walks over the RTL. */
4981 RTX_FLAG (copy, used) = 0;
4983 /* We do not copy JUMP, CALL, or FRAME_RELATED for INSNs. */
4986 RTX_FLAG (copy, jump) = 0;
4987 RTX_FLAG (copy, call) = 0;
4988 RTX_FLAG (copy, frame_related) = 0;
4991 format_ptr = GET_RTX_FORMAT (GET_CODE (copy));
4993 for (i = 0; i < GET_RTX_LENGTH (GET_CODE (copy)); i++)
4995 copy->u.fld[i] = orig->u.fld[i];
4996 switch (*format_ptr++)
4999 if (XEXP (orig, i) != NULL)
5000 XEXP (copy, i) = copy_insn_1 (XEXP (orig, i));
5005 if (XVEC (orig, i) == orig_asm_constraints_vector)
5006 XVEC (copy, i) = copy_asm_constraints_vector;
5007 else if (XVEC (orig, i) == orig_asm_operands_vector)
5008 XVEC (copy, i) = copy_asm_operands_vector;
5009 else if (XVEC (orig, i) != NULL)
5011 XVEC (copy, i) = rtvec_alloc (XVECLEN (orig, i));
5012 for (j = 0; j < XVECLEN (copy, i); j++)
5013 XVECEXP (copy, i, j) = copy_insn_1 (XVECEXP (orig, i, j));
5024 /* These are left unchanged. */
5032 if (code == SCRATCH)
5034 i = copy_insn_n_scratches++;
5035 gcc_assert (i < MAX_RECOG_OPERANDS);
5036 copy_insn_scratch_in[i] = orig;
5037 copy_insn_scratch_out[i] = copy;
5039 else if (code == ASM_OPERANDS)
5041 orig_asm_operands_vector = ASM_OPERANDS_INPUT_VEC (orig);
5042 copy_asm_operands_vector = ASM_OPERANDS_INPUT_VEC (copy);
5043 orig_asm_constraints_vector = ASM_OPERANDS_INPUT_CONSTRAINT_VEC (orig);
5044 copy_asm_constraints_vector = ASM_OPERANDS_INPUT_CONSTRAINT_VEC (copy);
5050 /* Create a new copy of an rtx.
5051 This function differs from copy_rtx in that it handles SCRATCHes and
5052 ASM_OPERANDs properly.
5053 INSN doesn't really have to be a full INSN; it could be just the
5056 copy_insn (rtx insn)
5058 copy_insn_n_scratches = 0;
5059 orig_asm_operands_vector = 0;
5060 orig_asm_constraints_vector = 0;
5061 copy_asm_operands_vector = 0;
5062 copy_asm_constraints_vector = 0;
5063 return copy_insn_1 (insn);
5066 /* Initialize data structures and variables in this file
5067 before generating rtl for each function. */
5072 struct function *f = cfun;
5074 f->emit = ggc_alloc (sizeof (struct emit_status));
5078 reg_rtx_no = LAST_VIRTUAL_REGISTER + 1;
5079 last_location = UNKNOWN_LOCATION;
5080 first_label_num = label_num;
5083 /* Init the tables that describe all the pseudo regs. */
5085 f->emit->regno_pointer_align_length = LAST_VIRTUAL_REGISTER + 101;
5087 f->emit->regno_pointer_align
5088 = ggc_alloc_cleared (f->emit->regno_pointer_align_length
5089 * sizeof (unsigned char));
5092 = ggc_alloc (f->emit->regno_pointer_align_length * sizeof (rtx));
5094 /* Put copies of all the hard registers into regno_reg_rtx. */
5095 memcpy (regno_reg_rtx,
5096 static_regno_reg_rtx,
5097 FIRST_PSEUDO_REGISTER * sizeof (rtx));
5099 /* Put copies of all the virtual register rtx into regno_reg_rtx. */
5100 init_virtual_regs (f->emit);
5102 /* Indicate that the virtual registers and stack locations are
5104 REG_POINTER (stack_pointer_rtx) = 1;
5105 REG_POINTER (frame_pointer_rtx) = 1;
5106 REG_POINTER (hard_frame_pointer_rtx) = 1;
5107 REG_POINTER (arg_pointer_rtx) = 1;
5109 REG_POINTER (virtual_incoming_args_rtx) = 1;
5110 REG_POINTER (virtual_stack_vars_rtx) = 1;
5111 REG_POINTER (virtual_stack_dynamic_rtx) = 1;
5112 REG_POINTER (virtual_outgoing_args_rtx) = 1;
5113 REG_POINTER (virtual_cfa_rtx) = 1;
5115 #ifdef STACK_BOUNDARY
5116 REGNO_POINTER_ALIGN (STACK_POINTER_REGNUM) = STACK_BOUNDARY;
5117 REGNO_POINTER_ALIGN (FRAME_POINTER_REGNUM) = STACK_BOUNDARY;
5118 REGNO_POINTER_ALIGN (HARD_FRAME_POINTER_REGNUM) = STACK_BOUNDARY;
5119 REGNO_POINTER_ALIGN (ARG_POINTER_REGNUM) = STACK_BOUNDARY;
5121 REGNO_POINTER_ALIGN (VIRTUAL_INCOMING_ARGS_REGNUM) = STACK_BOUNDARY;
5122 REGNO_POINTER_ALIGN (VIRTUAL_STACK_VARS_REGNUM) = STACK_BOUNDARY;
5123 REGNO_POINTER_ALIGN (VIRTUAL_STACK_DYNAMIC_REGNUM) = STACK_BOUNDARY;
5124 REGNO_POINTER_ALIGN (VIRTUAL_OUTGOING_ARGS_REGNUM) = STACK_BOUNDARY;
5125 REGNO_POINTER_ALIGN (VIRTUAL_CFA_REGNUM) = BITS_PER_WORD;
5128 #ifdef INIT_EXPANDERS
5133 /* Generate a vector constant for mode MODE and constant value CONSTANT. */
5136 gen_const_vector (enum machine_mode mode, int constant)
5141 enum machine_mode inner;
5143 units = GET_MODE_NUNITS (mode);
5144 inner = GET_MODE_INNER (mode);
5146 v = rtvec_alloc (units);
5148 /* We need to call this function after we set the scalar const_tiny_rtx
5150 gcc_assert (const_tiny_rtx[constant][(int) inner]);
5152 for (i = 0; i < units; ++i)
5153 RTVEC_ELT (v, i) = const_tiny_rtx[constant][(int) inner];
5155 tem = gen_rtx_raw_CONST_VECTOR (mode, v);
5159 /* Generate a vector like gen_rtx_raw_CONST_VEC, but use the zero vector when
5160 all elements are zero, and the one vector when all elements are one. */
5162 gen_rtx_CONST_VECTOR (enum machine_mode mode, rtvec v)
5164 enum machine_mode inner = GET_MODE_INNER (mode);
5165 int nunits = GET_MODE_NUNITS (mode);
5169 /* Check to see if all of the elements have the same value. */
5170 x = RTVEC_ELT (v, nunits - 1);
5171 for (i = nunits - 2; i >= 0; i--)
5172 if (RTVEC_ELT (v, i) != x)
5175 /* If the values are all the same, check to see if we can use one of the
5176 standard constant vectors. */
5179 if (x == CONST0_RTX (inner))
5180 return CONST0_RTX (mode);
5181 else if (x == CONST1_RTX (inner))
5182 return CONST1_RTX (mode);
5185 return gen_rtx_raw_CONST_VECTOR (mode, v);
5188 /* Create some permanent unique rtl objects shared between all functions.
5189 LINE_NUMBERS is nonzero if line numbers are to be generated. */
5192 init_emit_once (int line_numbers)
5195 enum machine_mode mode;
5196 enum machine_mode double_mode;
5198 /* We need reg_raw_mode, so initialize the modes now. */
5199 init_reg_modes_once ();
5201 /* Initialize the CONST_INT, CONST_DOUBLE, and memory attribute hash
5203 const_int_htab = htab_create_ggc (37, const_int_htab_hash,
5204 const_int_htab_eq, NULL);
5206 const_double_htab = htab_create_ggc (37, const_double_htab_hash,
5207 const_double_htab_eq, NULL);
5209 mem_attrs_htab = htab_create_ggc (37, mem_attrs_htab_hash,
5210 mem_attrs_htab_eq, NULL);
5211 reg_attrs_htab = htab_create_ggc (37, reg_attrs_htab_hash,
5212 reg_attrs_htab_eq, NULL);
5214 no_line_numbers = ! line_numbers;
5216 /* Compute the word and byte modes. */
5218 byte_mode = VOIDmode;
5219 word_mode = VOIDmode;
5220 double_mode = VOIDmode;
5222 for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
5223 mode = GET_MODE_WIDER_MODE (mode))
5225 if (GET_MODE_BITSIZE (mode) == BITS_PER_UNIT
5226 && byte_mode == VOIDmode)
5229 if (GET_MODE_BITSIZE (mode) == BITS_PER_WORD
5230 && word_mode == VOIDmode)
5234 for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode;
5235 mode = GET_MODE_WIDER_MODE (mode))
5237 if (GET_MODE_BITSIZE (mode) == DOUBLE_TYPE_SIZE
5238 && double_mode == VOIDmode)
5242 ptr_mode = mode_for_size (POINTER_SIZE, GET_MODE_CLASS (Pmode), 0);
5244 /* Assign register numbers to the globally defined register rtx.
5245 This must be done at runtime because the register number field
5246 is in a union and some compilers can't initialize unions. */
5248 pc_rtx = gen_rtx_PC (VOIDmode);
5249 cc0_rtx = gen_rtx_CC0 (VOIDmode);
5250 stack_pointer_rtx = gen_raw_REG (Pmode, STACK_POINTER_REGNUM);
5251 frame_pointer_rtx = gen_raw_REG (Pmode, FRAME_POINTER_REGNUM);
5252 if (hard_frame_pointer_rtx == 0)
5253 hard_frame_pointer_rtx = gen_raw_REG (Pmode,
5254 HARD_FRAME_POINTER_REGNUM);
5255 if (arg_pointer_rtx == 0)
5256 arg_pointer_rtx = gen_raw_REG (Pmode, ARG_POINTER_REGNUM);
5257 virtual_incoming_args_rtx =
5258 gen_raw_REG (Pmode, VIRTUAL_INCOMING_ARGS_REGNUM);
5259 virtual_stack_vars_rtx =
5260 gen_raw_REG (Pmode, VIRTUAL_STACK_VARS_REGNUM);
5261 virtual_stack_dynamic_rtx =
5262 gen_raw_REG (Pmode, VIRTUAL_STACK_DYNAMIC_REGNUM);
5263 virtual_outgoing_args_rtx =
5264 gen_raw_REG (Pmode, VIRTUAL_OUTGOING_ARGS_REGNUM);
5265 virtual_cfa_rtx = gen_raw_REG (Pmode, VIRTUAL_CFA_REGNUM);
5267 /* Initialize RTL for commonly used hard registers. These are
5268 copied into regno_reg_rtx as we begin to compile each function. */
5269 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
5270 static_regno_reg_rtx[i] = gen_raw_REG (reg_raw_mode[i], i);
5272 #ifdef INIT_EXPANDERS
5273 /* This is to initialize {init|mark|free}_machine_status before the first
5274 call to push_function_context_to. This is needed by the Chill front
5275 end which calls push_function_context_to before the first call to
5276 init_function_start. */
5280 /* Create the unique rtx's for certain rtx codes and operand values. */
5282 /* Don't use gen_rtx_CONST_INT here since gen_rtx_CONST_INT in this case
5283 tries to use these variables. */
5284 for (i = - MAX_SAVED_CONST_INT; i <= MAX_SAVED_CONST_INT; i++)
5285 const_int_rtx[i + MAX_SAVED_CONST_INT] =
5286 gen_rtx_raw_CONST_INT (VOIDmode, (HOST_WIDE_INT) i);
5288 if (STORE_FLAG_VALUE >= - MAX_SAVED_CONST_INT
5289 && STORE_FLAG_VALUE <= MAX_SAVED_CONST_INT)
5290 const_true_rtx = const_int_rtx[STORE_FLAG_VALUE + MAX_SAVED_CONST_INT];
5292 const_true_rtx = gen_rtx_CONST_INT (VOIDmode, STORE_FLAG_VALUE);
5294 REAL_VALUE_FROM_INT (dconst0, 0, 0, double_mode);
5295 REAL_VALUE_FROM_INT (dconst1, 1, 0, double_mode);
5296 REAL_VALUE_FROM_INT (dconst2, 2, 0, double_mode);
5297 REAL_VALUE_FROM_INT (dconst3, 3, 0, double_mode);
5298 REAL_VALUE_FROM_INT (dconst10, 10, 0, double_mode);
5299 REAL_VALUE_FROM_INT (dconstm1, -1, -1, double_mode);
5300 REAL_VALUE_FROM_INT (dconstm2, -2, -1, double_mode);
5302 dconsthalf = dconst1;
5303 SET_REAL_EXP (&dconsthalf, REAL_EXP (&dconsthalf) - 1);
5305 real_arithmetic (&dconstthird, RDIV_EXPR, &dconst1, &dconst3);
5307 /* Initialize mathematical constants for constant folding builtins.
5308 These constants need to be given to at least 160 bits precision. */
5309 real_from_string (&dconstpi,
5310 "3.1415926535897932384626433832795028841971693993751058209749445923078");
5311 real_from_string (&dconste,
5312 "2.7182818284590452353602874713526624977572470936999595749669676277241");
5314 for (i = 0; i < (int) ARRAY_SIZE (const_tiny_rtx); i++)
5316 REAL_VALUE_TYPE *r =
5317 (i == 0 ? &dconst0 : i == 1 ? &dconst1 : &dconst2);
5319 for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode;
5320 mode = GET_MODE_WIDER_MODE (mode))
5321 const_tiny_rtx[i][(int) mode] =
5322 CONST_DOUBLE_FROM_REAL_VALUE (*r, mode);
5324 const_tiny_rtx[i][(int) VOIDmode] = GEN_INT (i);
5326 for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
5327 mode = GET_MODE_WIDER_MODE (mode))
5328 const_tiny_rtx[i][(int) mode] = GEN_INT (i);
5330 for (mode = GET_CLASS_NARROWEST_MODE (MODE_PARTIAL_INT);
5332 mode = GET_MODE_WIDER_MODE (mode))
5333 const_tiny_rtx[i][(int) mode] = GEN_INT (i);
5336 for (mode = GET_CLASS_NARROWEST_MODE (MODE_VECTOR_INT);
5338 mode = GET_MODE_WIDER_MODE (mode))
5340 const_tiny_rtx[0][(int) mode] = gen_const_vector (mode, 0);
5341 const_tiny_rtx[1][(int) mode] = gen_const_vector (mode, 1);
5344 for (mode = GET_CLASS_NARROWEST_MODE (MODE_VECTOR_FLOAT);
5346 mode = GET_MODE_WIDER_MODE (mode))
5348 const_tiny_rtx[0][(int) mode] = gen_const_vector (mode, 0);
5349 const_tiny_rtx[1][(int) mode] = gen_const_vector (mode, 1);
5352 for (i = (int) CCmode; i < (int) MAX_MACHINE_MODE; ++i)
5353 if (GET_MODE_CLASS ((enum machine_mode) i) == MODE_CC)
5354 const_tiny_rtx[0][i] = const0_rtx;
5356 const_tiny_rtx[0][(int) BImode] = const0_rtx;
5357 if (STORE_FLAG_VALUE == 1)
5358 const_tiny_rtx[1][(int) BImode] = const1_rtx;
5360 #ifdef RETURN_ADDRESS_POINTER_REGNUM
5361 return_address_pointer_rtx
5362 = gen_raw_REG (Pmode, RETURN_ADDRESS_POINTER_REGNUM);
5365 #ifdef STATIC_CHAIN_REGNUM
5366 static_chain_rtx = gen_rtx_REG (Pmode, STATIC_CHAIN_REGNUM);
5368 #ifdef STATIC_CHAIN_INCOMING_REGNUM
5369 if (STATIC_CHAIN_INCOMING_REGNUM != STATIC_CHAIN_REGNUM)
5370 static_chain_incoming_rtx
5371 = gen_rtx_REG (Pmode, STATIC_CHAIN_INCOMING_REGNUM);
5374 static_chain_incoming_rtx = static_chain_rtx;
5378 static_chain_rtx = STATIC_CHAIN;
5380 #ifdef STATIC_CHAIN_INCOMING
5381 static_chain_incoming_rtx = STATIC_CHAIN_INCOMING;
5383 static_chain_incoming_rtx = static_chain_rtx;
5387 if ((unsigned) PIC_OFFSET_TABLE_REGNUM != INVALID_REGNUM)
5388 pic_offset_table_rtx = gen_raw_REG (Pmode, PIC_OFFSET_TABLE_REGNUM);
5391 /* Produce exact duplicate of insn INSN after AFTER.
5392 Care updating of libcall regions if present. */
5395 emit_copy_of_insn_after (rtx insn, rtx after)
5398 rtx note1, note2, link;
5400 switch (GET_CODE (insn))
5403 new = emit_insn_after (copy_insn (PATTERN (insn)), after);
5407 new = emit_jump_insn_after (copy_insn (PATTERN (insn)), after);
5411 new = emit_call_insn_after (copy_insn (PATTERN (insn)), after);
5412 if (CALL_INSN_FUNCTION_USAGE (insn))
5413 CALL_INSN_FUNCTION_USAGE (new)
5414 = copy_insn (CALL_INSN_FUNCTION_USAGE (insn));
5415 SIBLING_CALL_P (new) = SIBLING_CALL_P (insn);
5416 CONST_OR_PURE_CALL_P (new) = CONST_OR_PURE_CALL_P (insn);
5423 /* Update LABEL_NUSES. */
5424 mark_jump_label (PATTERN (new), new, 0);
5426 INSN_LOCATOR (new) = INSN_LOCATOR (insn);
5428 /* If the old insn is frame related, then so is the new one. This is
5429 primarily needed for IA-64 unwind info which marks epilogue insns,
5430 which may be duplicated by the basic block reordering code. */
5431 RTX_FRAME_RELATED_P (new) = RTX_FRAME_RELATED_P (insn);
5433 /* Copy all REG_NOTES except REG_LABEL since mark_jump_label will
5435 for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
5436 if (REG_NOTE_KIND (link) != REG_LABEL)
5438 if (GET_CODE (link) == EXPR_LIST)
5440 = copy_insn_1 (gen_rtx_EXPR_LIST (REG_NOTE_KIND (link),
5445 = copy_insn_1 (gen_rtx_INSN_LIST (REG_NOTE_KIND (link),
5450 /* Fix the libcall sequences. */
5451 if ((note1 = find_reg_note (new, REG_RETVAL, NULL_RTX)) != NULL)
5454 while ((note2 = find_reg_note (p, REG_LIBCALL, NULL_RTX)) == NULL)
5456 XEXP (note1, 0) = p;
5457 XEXP (note2, 0) = new;
5459 INSN_CODE (new) = INSN_CODE (insn);
5463 static GTY((deletable)) rtx hard_reg_clobbers [NUM_MACHINE_MODES][FIRST_PSEUDO_REGISTER];
5465 gen_hard_reg_clobber (enum machine_mode mode, unsigned int regno)
5467 if (hard_reg_clobbers[mode][regno])
5468 return hard_reg_clobbers[mode][regno];
5470 return (hard_reg_clobbers[mode][regno] =
5471 gen_rtx_CLOBBER (VOIDmode, gen_rtx_REG (mode, regno)));
5474 #include "gt-emit-rtl.h"