gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
   3 # 2008, 2009, 2010 Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 3, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING3.  If not see
  19 #<http://www.gnu.org/licenses/>.
  20
  21 # This is the GCC target-specific configuration file
  22 # where a configuration type is mapped to different system-specific
  23 # definitions and files.  This is invoked by the autoconf-generated
  24 # configure script.  Putting it in a separate shell file lets us skip
  25 # running autoconf when modifying target-specific information.
  26
  27 # When you change the cases in the OS or target switches, consider
  28 # updating ../libgcc/config.host also.
  29
  30 # This file switches on the shell variable ${target}, and also uses the
  31 # following shell variables:
  32 #
  33 #  with_*               Various variables as set by configure.
  34 #
  35 #  enable_threads       Either the name, yes or no depending on whether
  36 #                       threads support was requested.
  37 #
  38 #  default_use_cxa_atexit
  39 #                         The default value for the $enable___cxa_atexit
  40 #                       variable.  enable___cxa_atexit needs to be set to
  41 #                       "yes" for the correct operation of C++ destructors
  42 #                       but it relies upon the presence of a non-standard C
  43 #                       library function called __cxa_atexit.
  44 #                         Since not all C libraries provide __cxa_atexit the
  45 #                       default value of $default_use_cxa_atexit is set to
  46 #                       "no" except for targets which are known to be OK.
  47 #
  48 #  gas_flag             Either yes or no depending on whether GNU as was
  49 #                       requested.
  50 #
  51 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  52 #                       requested.
  53
  54 # This file sets the following shell variables for use by the
  55 # autoconf-generated configure script:
  56 #
  57 #  cpu_type             The name of the cpu, if different from the first
  58 #                       chunk of the canonical target name.
  59 #
  60 #  tm_defines           List of target macros to define for all compilations.
  61 #
  62 #  tm_file              A list of target macro files, if different from
  63 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  64 #                       per target in a way like this:
  65 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  66 #                       Note that the preferred order is:
  67 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  68 #                       - generic headers like dbxelf.h elfos.h, etc.
  69 #                       - specializing target headers like ${cpu_type.h}/elf.h
  70 #                       This helps to keep OS specific stuff out of the CPU
  71 #                       defining header ${cpu_type}/${cpu_type.h}.
  72 #
  73 #                       It is possible to include automatically-generated
  74 #                       build-directory files by prefixing them with "./".
  75 #                       All other files should relative to $srcdir/config.
  76 #
  77 #  tm_p_file            Location of file with declarations for functions
  78 #                       in $out_file.
  79 #
  80 #  out_file             The name of the machine description C support
  81 #                       file, if different from "$cpu_type/$cpu_type.c".
  82 #
  83 #  md_file              The name of the machine-description file, if
  84 #                       different from "$cpu_type/$cpu_type.md".
  85 #
  86 #  tmake_file           A list of machine-description-specific
  87 #                       makefile-fragments, if different from
  88 #                       "$cpu_type/t-$cpu_type".
  89 #
  90 #  extra_modes          The name of the file containing a list of extra
  91 #                       machine modes, if necessary and different from
  92 #                       "$cpu_type/$cpu_type-modes.def".
  93 #
  94 #  extra_objs           List of extra objects that should be linked into
  95 #                       the compiler proper (cc1, cc1obj, cc1plus)
  96 #                       depending on target.
  97 #
  98 #  extra_gcc_objs       List of extra objects that should be linked into
  99 #                       the compiler driver (gcc) depending on target.
 100 #
 101 #  extra_headers        List of used header files from the directory
 102 #                       config/${cpu_type}.
 103 #
 104 #  use_gcc_tgmath       If set, add tgmath.h to the list of used header
 105 #                       files.
 106 #
 107 #  use_gcc_stdint       If "wrap", install a version of stdint.h that
 108 #                       wraps the system's copy for hosted compilations;
 109 #                       if "provide", provide a version of systems without
 110 #                       such a system header; otherwise "none", do not
 111 #                       provide such a header at all.
 112 #
 113 #  extra_passes         List of extra executables compiled for this target
 114 #                       machine, used for compiling from source to object.
 115 #
 116 #  extra_parts          List of extra object files that should be compiled
 117 #                       for this target machine.
 118 #
 119 #  extra_programs       Like extra_passes, but these are used when linking.
 120 #
 121 #  extra_options        List of target-dependent .opt files.
 122 #
 123 #  c_target_objs        List of extra target-dependent objects that be
 124 #                       linked into the C compiler only.
 125 #
 126 #  cxx_target_objs      List of extra target-dependent objects that be
 127 #                       linked into the C++ compiler only.
 128 #
 129 #  fortran_target_objs  List of extra target-dependent objects that be
 130 #                       linked into the fortran compiler only.
 131 #
 132 #  target_gtfiles       List of extra source files with type information.
 133 #
 134 #  xm_defines           List of macros to define when compiling for the
 135 #                       target machine.
 136 #
 137 #  xm_file              List of files to include when compiling for the
 138 #                       target machine.
 139 #
 140 #  use_collect2         Set to yes or no, depending on whether collect2
 141 #                       will be used.
 142 #
 143 #  target_cpu_default   Set to override the default target model.
 144 #
 145 #  gdb_needs_out_file_path
 146 #                       Set to yes if gdb needs a dir command with
 147 #                       `dirname $out_file`.
 148 #
 149 #  thread_file          Set to control which thread package to use.
 150 #
 151 #  gas                  Set to yes or no depending on whether the target
 152 #                       system normally uses GNU as.
 153 #
 154 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 155 #                       for this target.  This is true if this target
 156 #                       supports "long" or "wchar_t" wider than 32 bits,
 157 #                       or BITS_PER_WORD is wider than 32 bits.
 158 #                       The setting made here must match the one made in
 159 #                       other locations such as libcpp/configure.ac
 160 #
 161 #  configure_default_options
 162 #                       Set to an initializer for configure_default_options
 163 #                       in configargs.h, based on --with-cpu et cetera.
 164
 165 # The following variables are used in each case-construct to build up the
 166 # outgoing variables:
 167 #
 168 #  gnu_ld               Set to yes or no depending on whether the target
 169 #                       system normally uses GNU ld.
 170
 171 out_file=
 172 tmake_file=
 173 extra_headers=
 174 use_gcc_tgmath=yes
 175 use_gcc_stdint=none
 176 extra_passes=
 177 extra_parts=
 178 extra_programs=
 179 extra_objs=
 180 extra_gcc_objs=
 181 extra_options=
 182 c_target_objs=
 183 cxx_target_objs=
 184 fortran_target_objs=
 185 tm_defines=
 186 xm_defines=
 187 # Set this to force installation and use of collect2.
 188 use_collect2=
 189 # Set this to override the default target model.
 190 target_cpu_default=
 191 # Set this if gdb needs a dir command with `dirname $out_file`
 192 gdb_needs_out_file_path=
 193 # Set this to control which thread package will be used.
 194 thread_file=
 195 # Reinitialize these from the flag values every loop pass, since some
 196 # configure entries modify them.
 197 gas="$gas_flag"
 198 gnu_ld="$gnu_ld_flag"
 199 default_use_cxa_atexit=no
 200 target_gtfiles=
 201 need_64bit_hwint=
 202 need_64bit_isa=
 203 # Selects the object file format reader/writer used by LTO.
 204 lto_binary_reader=lto-elf
 205
 206 # Don't carry these over build->host->target.  Please.
 207 xm_file=
 208 md_file=
 209
 210 # Obsolete configurations.
 211 #case ${target} in
 212 # )
 213 #    if test "x$enable_obsolete" != xyes; then
 214 #      echo "*** Configuration ${target} is obsolete." >&2
 215 #      echo "*** Specify --enable-obsolete to build it anyway." >&2
 216 #      echo "*** Support will be REMOVED in the next major release of GCC," >&2
 217 #      echo "*** unless a maintainer comes forward." >&2
 218 #      exit 1
 219 #    fi;;
 220 #esac
 221
 222 # Unsupported targets list.  Do not put an entry in this list unless
 223 # it would otherwise be caught by a more permissive pattern.  The list
 224 # should be in alphabetical order.
 225 case ${target} in
 226    i[34567]86-go32-*                    \
 227  | i[34567]86-*-go32*                   \
 228  | mips64orion*-*-rtems*                \
 229  | pdp11-*-bsd                          \
 230  | sparc-hal-solaris2*                  \
 231  | thumb-*-*                            \
 232  | *-*-linux*aout*                      \
 233  | *-*-linux*coff*                      \
 234  | *-*-linux*libc1*                     \
 235  | *-*-linux*oldld*                     \
 236  | *-*-rtemsaout*                       \
 237  | *-*-rtemscoff*                       \
 238  | *-*-solaris2.[0-7]                   \
 239  | *-*-solaris2.[0-7].*                 \
 240  | *-*-sysv*            \
 241  | vax-*-vms*                           \
 242  )
 243         echo "*** Configuration ${target} not supported" 1>&2
 244         exit 1
 245         ;;
 246 esac
 247
 248 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 249 # updated in each machine entry.  Also set default extra_headers for some
 250 # machines.
 251 tm_p_file=
 252 cpu_type=`echo ${target} | sed 's/-.*$//'`
 253 cpu_is_64bit=
 254 case ${target} in
 255 m32c*-*-*)
 256         cpu_type=m32c
 257         tmake_file=m32c/t-m32c
 258         ;;
 259 alpha*-*-*)
 260         cpu_type=alpha
 261         need_64bit_hwint=yes
 262         ;;
 263 am33_2.0-*-linux*)
 264         cpu_type=mn10300
 265         ;;
 266 arm*-*-*)
 267         cpu_type=arm
 268         extra_headers="mmintrin.h arm_neon.h"
 269         c_target_objs="arm-c.o"
 270         cxx_target_objs="arm-c.o"
 271         ;;
 272 avr-*-*)
 273         cpu_type=avr
 274         c_target_objs="avr-c.o"
 275         cxx_target_objs="avr-c.o"
 276         ;;
 277 bfin*-*)
 278         cpu_type=bfin
 279         ;;
 280 crisv32-*)
 281         cpu_type=cris
 282         ;;
 283 frv*)   cpu_type=frv
 284         ;;
 285 moxie*) cpu_type=moxie
 286         ;;
 287 fido-*-*)
 288         cpu_type=m68k
 289         extra_headers=math-68881.h
 290         ;;
 291 i[34567]86-*-*)
 292         cpu_type=i386
 293         c_target_objs="i386-c.o"
 294         cxx_target_objs="i386-c.o"
 295         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 296                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 297                        nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
 298                        immintrin.h x86intrin.h avxintrin.h xopintrin.h
 299                        ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
 300                        abmintrin.h"
 301         ;;
 302 x86_64-*-*)
 303         cpu_type=i386
 304         c_target_objs="i386-c.o"
 305         cxx_target_objs="i386-c.o"
 306         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 307                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 308                        nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
 309                        immintrin.h x86intrin.h avxintrin.h xopintrin.h
 310                        ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
 311                        abmintrin.h"
 312         need_64bit_hwint=yes
 313         ;;
 314 ia64-*-*)
 315         extra_headers=ia64intrin.h
 316         need_64bit_hwint=yes
 317         ;;
 318 hppa*-*-*)
 319         cpu_type=pa
 320         ;;
 321 m32r*-*-*)
 322         cpu_type=m32r
 323         ;;
 324 m68k-*-*)
 325         extra_headers=math-68881.h
 326         ;;
 327 mips*-*-*)
 328         cpu_type=mips
 329         need_64bit_hwint=yes
 330         extra_headers="loongson.h"
 331         ;;
 332 picochip-*-*)
 333         cpu_type=picochip
 334         ;;
 335 powerpc*-*-*)
 336         cpu_type=rs6000
 337         extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
 338         need_64bit_hwint=yes
 339         case x$with_cpu in
 340             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
 341                 cpu_is_64bit=yes
 342                 ;;
 343         esac
 344         ;;
 345 rs6000*-*-*)
 346         need_64bit_hwint=yes
 347         ;;
 348 score*-*-*)
 349         cpu_type=score
 350         ;;
 351 sparc*-*-*)
 352         cpu_type=sparc
 353         need_64bit_hwint=yes
 354         ;;
 355 spu*-*-*)
 356         cpu_type=spu
 357         need_64bit_hwint=yes
 358         ;;
 359 s390*-*-*)
 360         cpu_type=s390
 361         need_64bit_hwint=yes
 362         ;;
 363 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 364 sh[123456789lbe]*-*-* | sh-*-*)
 365         cpu_type=sh
 366         need_64bit_hwint=yes
 367         ;;
 368 esac
 369
 370 tm_file=${cpu_type}/${cpu_type}.h
 371 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 372 then
 373         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 374 fi
 375 extra_modes=
 376 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 377 then
 378         extra_modes=${cpu_type}/${cpu_type}-modes.def
 379 fi
 380 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 381 then
 382         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 383 fi
 384
 385 case ${target} in
 386 i[34567]86-*-*)
 387         if test "x$enable_cld" = xyes; then
 388                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 389         fi
 390         tm_file="vxworks-dummy.h ${tm_file}"
 391         ;;
 392 x86_64-*-*)
 393         tm_file="i386/biarch64.h ${tm_file}"
 394         if test "x$enable_cld" = xyes; then
 395                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 396         fi
 397         tm_file="vxworks-dummy.h ${tm_file}"
 398         ;;
 399 esac
 400
 401 # On a.out targets, we need to use collect2.
 402 case ${target} in
 403 *-*-*aout*)
 404         use_collect2=yes
 405         ;;
 406 esac
 407
 408 # Common parts for widely ported systems.
 409 case ${target} in
 410 *-*-darwin*)
 411   tm_file="${tm_file} darwin.h"
 412   case ${target} in
 413   *-*-darwin9*)
 414     tm_file="${tm_file} darwin9.h"
 415     ;;
 416   *-*-darwin[12][0-9]*)
 417     tm_file="${tm_file} darwin9.h darwin10.h"
 418     ;;
 419   esac
 420   tm_file="${tm_file} ${cpu_type}/darwin.h"
 421   tm_p_file="${tm_p_file} darwin-protos.h"
 422   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 423   target_gtfiles="\$(srcdir)/config/darwin.c"
 424   extra_options="${extra_options} darwin.opt"
 425   c_target_objs="${c_target_objs} darwin-c.o"
 426   cxx_target_objs="${cxx_target_objs} darwin-c.o"
 427   fortran_target_objs="darwin-f.o"
 428   extra_objs="darwin.o"
 429   extra_gcc_objs="darwin-driver.o"
 430   default_use_cxa_atexit=yes
 431   use_gcc_stdint=wrap
 432   case ${enable_threads} in
 433     "" | yes | posix) thread_file='posix' ;;
 434   esac
 435   ;;
 436 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 437   # This is the place-holder for the generic a.out configuration
 438   # of FreeBSD.  No actual configuration resides here since
 439   # there was only ever a bare-bones ix86 configuration for
 440   # a.out and it exists solely in the machine-specific section.
 441   # This place-holder must exist to avoid dropping into
 442   # the generic ELF configuration of FreeBSD (i.e. it must be
 443   # ordered before that section).
 444   ;;
 445 *-*-freebsd*)
 446   # This is the generic ELF configuration of FreeBSD.  Later
 447   # machine-specific sections may refine and add to this
 448   # configuration.
 449   #
 450   # Due to tm_file entry ordering issues that vary between cpu
 451   # architectures, we only define fbsd_tm_file to allow the
 452   # machine-specific section to dictate the final order of all
 453   # entries of tm_file with the minor exception that components
 454   # of the tm_file set here will always be of the form:
 455   #
 456   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 457   #
 458   # The machine-specific section should not tamper with this
 459   # ordering but may order all other entries of tm_file as it
 460   # pleases around the provided core setting.
 461   gas=yes
 462   gnu_ld=yes
 463   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 464   fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
 465   tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
 466   tmake_file="t-slibgcc-elf-ver t-freebsd"
 467   case ${enable_threads} in
 468     no)
 469       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 470       ;;
 471     "" | yes | posix)
 472       thread_file='posix'
 473       tmake_file="${tmake_file} t-freebsd-thread"
 474       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 475       # when "optionally" threaded via weak pthread_* checks.
 476       case ${target} in
 477         *-*-freebsd[34] | *-*-freebsd[34].*)
 478           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 479           ;;
 480       esac
 481       ;;
 482     *)
 483       echo 'Unknown thread configuration for FreeBSD'
 484       exit 1
 485       ;;
 486   esac
 487   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
 488   case ${target} in
 489     *-*-freebsd[345].*)
 490       :;;
 491     *)
 492       default_use_cxa_atexit=yes;;
 493   esac
 494   # need_64bit_hwint=yes # system compiler has this for all arch!
 495   use_gcc_stdint=wrap
 496   ;;
 497 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
 498   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 499   gas=yes
 500   gnu_ld=yes
 501   case ${enable_threads} in
 502     "" | yes | posix) thread_file='posix' ;;
 503   esac
 504   tmake_file="t-slibgcc-elf-ver t-linux"
 505   case $target in
 506     *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
 507       :;;
 508     *-*-gnu*)
 509       tmake_file="$tmake_file t-gnu";;
 510   esac
 511   # glibc / uclibc switch.  uclibc isn't usable for GNU/Hurd and neither for
 512   # GNU/k*BSD.
 513   case $target in
 514     *linux*)
 515       extra_options="$extra_options linux.opt";;
 516     *)
 517       tm_defines="$tm_defines OPTION_GLIBC=1";;
 518   esac
 519   case ${target} in
 520     *-*-*uclibc*)
 521       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 522       ;;
 523     *)
 524       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 525       ;;
 526   esac
 527   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 528   default_use_cxa_atexit=yes
 529   use_gcc_tgmath=no
 530   use_gcc_stdint=wrap
 531   ;;
 532 *-*-netbsd*)
 533   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 534   gas=yes
 535   gnu_ld=yes
 536
 537   # NetBSD 2.0 and later get POSIX threads enabled by default.
 538   # Allow them to be explicitly enabled on any other version.
 539   case ${enable_threads} in
 540     "")
 541       case ${target} in
 542         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 543           thread_file='posix'
 544           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 545           ;;
 546       esac
 547       ;;
 548     yes | posix)
 549       thread_file='posix'
 550       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 551       ;;
 552   esac
 553
 554   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 555   # ELF configurations.  We will clear extra_parts in the
 556   # a.out configurations.
 557   case ${target} in
 558     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 559       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 560       ;;
 561   esac
 562
 563   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 564   # default (unless overridden by --disable-__cxa_atexit).
 565   case ${target} in
 566     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 567       default_use_cxa_atexit=yes
 568       ;;
 569   esac
 570   ;;
 571 *-*-openbsd*)
 572   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 573   case ${enable_threads} in
 574     yes)
 575       thread_file='posix'
 576       tmake_file="${tmake_file} t-openbsd-thread"
 577       ;;
 578   esac
 579   case ${target} in
 580     *-*-openbsd2.*|*-*-openbsd3.[012])
 581       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 582   esac
 583   ;;
 584 *-*-rtems*)
 585   case ${enable_threads} in
 586     yes) thread_file='rtems' ;;
 587   esac
 588   use_gcc_stdint=wrap
 589   ;;
 590 *-*-uclinux*)
 591   use_gcc_stdint=wrap
 592   ;;
 593 *-*-vxworks*)
 594   tmake_file=t-vxworks
 595   xm_defines=POSIX
 596   extra_options="${extra_options} vxworks.opt"
 597   extra_objs=vxworks.o
 598   case ${enable_threads} in
 599     no) ;;
 600     "" | yes | vxworks) thread_file='vxworks' ;;
 601     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 602   esac
 603   ;;
 604 *-*-elf)
 605   # Assume that newlib is being used and so __cxa_atexit is provided.
 606   default_use_cxa_atexit=yes
 607   use_gcc_stdint=wrap
 608   ;;
 609 esac
 610
 611 case ${target} in
 612 # Support site-specific machine types.
 613 *local*)
 614         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 615         tm_file=${cpu_type}/$rest.h
 616         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 617         then xm_file=${cpu_type}/xm-$rest.h
 618         fi
 619         if test -f $srcdir/config/${cpu_type}/t-$rest
 620         then tmake_file=${cpu_type}/t-$rest
 621         fi
 622         ;;
 623 alpha*-*-linux*)
 624         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
 625         target_cpu_default="MASK_GAS"
 626         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 627         ;;
 628 alpha*-*-gnu*)
 629         tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
 630         target_cpu_default="MASK_GAS"
 631         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 632         ;;
 633 alpha*-*-freebsd*)
 634         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 635         target_cpu_default="MASK_GAS"
 636         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 637         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 638         ;;
 639 alpha*-*-netbsd*)
 640         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 641         target_cpu_default="MASK_GAS"
 642         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 643         ;;
 644 alpha*-*-openbsd*)
 645         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 646         tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
 647         # default x-alpha is only appropriate for dec-osf.
 648         target_cpu_default="MASK_GAS"
 649         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 650         ;;
 651 alpha*-dec-osf5.1*)
 652         if test x$stabs = xyes
 653         then
 654                 tm_file="${tm_file} dbx.h"
 655         fi
 656         if test x$gas != xyes
 657         then
 658                 extra_passes="mips-tfile mips-tdump"
 659         fi
 660         use_collect2=yes
 661         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
 662         tm_file="${tm_file} alpha/osf5.h"
 663         tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 664         extra_headers=va_list.h
 665         use_gcc_stdint=provide
 666         case ${enable_threads} in
 667           "" | yes | posix)
 668             thread_file='posix'
 669             tmake_file="${tmake_file} alpha/t-osf-pthread"
 670             ;;
 671         esac
 672         ;;
 673 alpha64-dec-*vms*)
 674         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 675         xm_file="alpha/xm-vms.h vms/xm-vms64.h"
 676         tmake_file="alpha/t-alpha vms/t-vms vms/t-vms64 alpha/t-vms alpha/t-ieee"
 677         xmake_file=vms/x-vms
 678         exeext=.exe
 679         install_headers_dir=install-headers-cp
 680         extra_options="${extra_options} vms/vms.opt"
 681         ;;
 682 alpha*-dec-*vms*)
 683         tm_file="${tm_file} alpha/vms.h"
 684         xm_file="alpha/xm-vms.h"
 685         tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
 686         xmake_file=vms/x-vms
 687         exeext=.exe
 688         install_headers_dir=install-headers-cp
 689         extra_options="${extra_options} vms/vms.opt"
 690         ;;
 691 arc-*-elf*)
 692         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
 693         extra_parts="crtinit.o crtfini.o"
 694         ;;
 695 arm-wrs-vxworks)
 696         tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
 697         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 698         ;;
 699 arm*-*-freebsd*)
 700         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 701         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 702         ;;
 703 arm*-*-netbsdelf*)
 704         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 705         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 706         ;;
 707 arm*-*-netbsd*)
 708         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 709         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 710         extra_parts=""
 711         use_collect2=yes
 712         ;;
 713 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 714         tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 715         case $target in
 716         arm*b-*)
 717                 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
 718                 ;;
 719         esac
 720         tmake_file="${tmake_file} t-linux arm/t-arm"
 721         case ${target} in
 722         arm*-*-linux-*eabi)
 723             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 724             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
 725             # The BPABI long long divmod functions return a 128-bit value in
 726             # registers r0-r3.  Correctly modeling that requires the use of
 727             # TImode.
 728             need_64bit_hwint=yes
 729             # The EABI requires the use of __cxa_atexit.
 730             default_use_cxa_atexit=yes
 731             ;;
 732         *)
 733             tmake_file="$tmake_file arm/t-linux"
 734             ;;
 735         esac
 736         tm_file="$tm_file arm/aout.h arm/arm.h"
 737         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 738         ;;
 739 arm*-*-uclinux*)                # ARM ucLinux
 740         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
 741         tmake_file="arm/t-arm arm/t-arm-elf"
 742         case ${target} in
 743         arm*-*-uclinux*eabi)
 744             tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
 745             tmake_file="$tmake_file arm/t-bpabi"
 746             # The BPABI long long divmod functions return a 128-bit value in
 747             # registers r0-r3.  Correctly modeling that requires the use of
 748             # TImode.
 749             need_64bit_hwint=yes
 750             # The EABI requires the use of __cxa_atexit.
 751             default_use_cxa_atexit=yes
 752         esac
 753         tm_file="$tm_file arm/aout.h arm/arm.h"
 754         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 755         ;;
 756 arm*-*-ecos-elf)
 757         tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 758         tmake_file="arm/t-arm arm/t-arm-elf"
 759         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 760         ;;
 761 arm*-*-eabi* | arm*-*-symbianelf* )
 762         # The BPABI long long divmod functions return a 128-bit value in
 763         # registers r0-r3.  Correctly modeling that requires the use of
 764         # TImode.
 765         need_64bit_hwint=yes
 766         default_use_cxa_atexit=yes
 767         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 768         tmake_file="arm/t-arm arm/t-arm-elf"
 769         case ${target} in
 770         arm*-*-eabi*)
 771           tm_file="$tm_file arm/eabi.h newlib-stdint.h"
 772           tmake_file="${tmake_file} arm/t-bpabi"
 773           extra_options="${extra_options} arm/eabi.opt"
 774           use_gcc_stdint=wrap
 775           ;;
 776         arm*-*-symbianelf*)
 777           tm_file="${tm_file} arm/symbian.h"
 778           # We do not include t-bpabi for Symbian OS because the system
 779           # provides its own implementation of the BPABI functions.
 780           tmake_file="${tmake_file} arm/t-symbian"
 781           ;;
 782         esac
 783         tm_file="${tm_file} arm/aout.h arm/arm.h"
 784         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 785         ;;
 786 arm*-*-rtems*)
 787         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
 788         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 789         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 790         ;;
 791 arm*-*-elf)
 792         tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 793         tmake_file="arm/t-arm arm/t-arm-elf"
 794         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 795         ;;
 796 arm*-wince-pe*)
 797         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 798         tmake_file="arm/t-arm arm/t-wince-pe"
 799         extra_options="${extra_options} arm/pe.opt"
 800         extra_objs="pe.o"
 801         ;;
 802 arm-*-pe*)
 803         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
 804         tmake_file="arm/t-arm arm/t-pe"
 805         use_gcc_stdint=wrap
 806         extra_options="${extra_options} arm/pe.opt"
 807         extra_objs="pe.o"
 808         ;;
 809 avr-*-rtems*)
 810         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
 811         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 812         extra_gcc_objs="driver-avr.o avr-devices.o"
 813         extra_objs="avr-devices.o"
 814         ;;
 815 avr-*-*)
 816         tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
 817         use_gcc_stdint=wrap
 818         extra_gcc_objs="driver-avr.o avr-devices.o"
 819         extra_objs="avr-devices.o"
 820         ;;
 821 bfin*-elf*)
 822         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
 823         tmake_file=bfin/t-bfin-elf
 824         use_collect2=no
 825         ;;
 826 bfin*-uclinux*)
 827         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
 828         tmake_file=bfin/t-bfin-uclinux
 829         tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 830         extra_options="${extra_options} linux.opt"
 831         use_collect2=no
 832         ;;
 833 bfin*-linux-uclibc*)
 834         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
 835         tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
 836         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
 837         use_collect2=no
 838         ;;
 839 bfin*-rtems*)
 840         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
 841         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
 842         ;;
 843 bfin*-*)
 844         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
 845         tmake_file=bfin/t-bfin
 846         use_collect2=no
 847         use_gcc_stdint=wrap
 848         ;;
 849 crisv32-*-elf | crisv32-*-none)
 850         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 851         tmake_file="cris/t-cris"
 852         target_cpu_default=32
 853         gas=yes
 854         extra_options="${extra_options} cris/elf.opt"
 855         use_gcc_stdint=wrap
 856         ;;
 857 cris-*-elf | cris-*-none)
 858         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 859         tmake_file="cris/t-cris cris/t-elfmulti"
 860         gas=yes
 861         extra_options="${extra_options} cris/elf.opt"
 862         use_gcc_stdint=wrap
 863         ;;
 864 crisv32-*-linux* | cris-*-linux*)
 865         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
 866         # We need to avoid using t-linux, so override default tmake_file
 867         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 868         extra_options="${extra_options} cris/linux.opt"
 869         case $target in
 870           cris-*-*)
 871                 target_cpu_default=10
 872                 ;;
 873           crisv32-*-*)
 874                 target_cpu_default=32
 875                 ;;
 876         esac
 877         ;;
 878 crx-*-elf)
 879         tm_file="elfos.h newlib-stdint.h ${tm_file}"
 880         extra_parts="crtbegin.o crtend.o"
 881         use_collect2=no
 882         ;;
 883 fr30-*-elf)
 884         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
 885         tmake_file=fr30/t-fr30
 886         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 887         ;;
 888 frv-*-elf)
 889         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} frv/frv-abi.h"
 890         tmake_file=frv/t-frv
 891         ;;
 892 frv-*-*linux*)
 893         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 894                  linux.h glibc-stdint.h frv/linux.h frv/frv-abi.h"
 895         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 896         ;;
 897 moxie-*-elf)
 898         gas=yes
 899         gnu_ld=yes
 900         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 901         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 902         tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
 903         ;;
 904 moxie-*-uclinux*)
 905         gas=yes
 906         gnu_ld=yes
 907         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
 908         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 909         tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
 910         tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 911         extra_options="${extra_options} linux.opt"
 912         ;;
 913 h8300-*-rtems*)
 914         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 915         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
 916         ;;
 917 h8300-*-elf*)
 918         tmake_file="h8300/t-h8300 h8300/t-elf"
 919         tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
 920         ;;
 921 hppa*64*-*-linux*)
 922         target_cpu_default="MASK_PA_11|MASK_PA_20"
 923         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 924                  glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
 925                  pa/pa64-linux.h"
 926         tmake_file="${tmake_file} pa/t-linux64"
 927         gas=yes gnu_ld=yes
 928         need_64bit_hwint=yes
 929         ;;
 930 hppa*-*-linux*)
 931         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 932         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
 933                  pa/pa32-regs.h pa/pa32-linux.h"
 934         tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
 935         # Set the libgcc version number
 936         if test x$sjlj = x1; then
 937             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 938         else
 939             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 940         fi
 941         ;;
 942 # port not yet contributed.
 943 #hppa*-*-openbsd*)
 944 #       target_cpu_default="MASK_PA_11"
 945 #       ;;
 946 hppa[12]*-*-hpux10*)
 947         case ${target} in
 948         hppa1.1-*-* | hppa2*-*-*)
 949                 target_cpu_default="MASK_PA_11"
 950                 ;;
 951         esac
 952         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 953                  pa/pa-hpux.h pa/pa-hpux10.h"
 954         extra_options="${extra_options} pa/pa-hpux.opt"
 955         case ${target} in
 956         *-*-hpux10.[1-9]*)
 957                 tm_file="${tm_file} pa/pa-hpux1010.h"
 958                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 959                 ;;
 960         esac
 961         use_gcc_stdint=provide
 962         tm_file="${tm_file} hpux-stdint.h"
 963         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 964         case ${enable_threads} in
 965           "")
 966             if test x$have_pthread_h = xyes ; then
 967               tmake_file="${tmake_file} pa/t-dce-thr"
 968             fi
 969             ;;
 970           yes | dce)
 971             tmake_file="${tmake_file} pa/t-dce-thr"
 972             ;;
 973         esac
 974         # Set the libgcc version number
 975         if test x$sjlj = x1; then
 976             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 977         else
 978             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 979         fi
 980         use_collect2=yes
 981         gas=yes
 982         ;;
 983 hppa*64*-*-hpux11*)
 984         target_cpu_default="MASK_PA_11|MASK_PA_20"
 985         if test x$gnu_ld = xyes
 986         then
 987                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 988         fi
 989         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 990                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 991                  pa/pa-hpux11.h"
 992         case ${target} in
 993         *-*-hpux11.[1-9]*)
 994                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 995                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 996                 ;;
 997         *)
 998                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 999                 ;;
1000         esac
1001         extra_options="${extra_options} pa/pa-hpux.opt \
1002                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1003         need_64bit_hwint=yes
1004         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1005         # Set the libgcc version number
1006         if test x$sjlj = x1; then
1007             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1008         else
1009             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1010         fi
1011         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1012                      libgcc_stub.a"
1013         case x${enable_threads} in
1014         x | xyes | xposix )
1015                 thread_file=posix
1016                 ;;
1017         esac
1018         gas=yes
1019         case ${target} in
1020           *-*-hpux11.[01]*)
1021                 use_gcc_stdint=provide
1022                 tm_file="${tm_file} hpux-stdint.h"
1023                 ;;
1024           *-*-hpux11.[23]*)
1025                 use_gcc_stdint=wrap
1026                 tm_file="${tm_file} hpux-stdint.h"
1027                 ;;
1028         esac
1029         ;;
1030 hppa[12]*-*-hpux11*)
1031         case ${target} in
1032         hppa1.1-*-* | hppa2*-*-*)
1033                 target_cpu_default="MASK_PA_11"
1034                 ;;
1035         esac
1036         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1037                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1038         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1039         case ${target} in
1040         *-*-hpux11.[1-9]*)
1041                 tm_file="${tm_file} pa/pa-hpux1111.h"
1042                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1043                 ;;
1044         esac
1045         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1046         # Set the libgcc version number
1047         if test x$sjlj = x1; then
1048             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1049         else
1050             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1051         fi
1052         case x${enable_threads} in
1053         x | xyes | xposix )
1054                 thread_file=posix
1055                 ;;
1056         esac
1057         use_collect2=yes
1058         gas=yes
1059         case ${target} in
1060           *-*-hpux11.[01]*)
1061                 use_gcc_stdint=provide
1062                 tm_file="${tm_file} hpux-stdint.h"
1063                 ;;
1064           *-*-hpux11.[23]*)
1065                 use_gcc_stdint=wrap
1066                 tm_file="${tm_file} hpux-stdint.h"
1067                 ;;
1068         esac
1069         ;;
1070 i[34567]86-*-darwin*)
1071         need_64bit_hwint=yes
1072         need_64bit_isa=yes
1073
1074         # This is so that '.../configure && make' doesn't fail due to
1075         # config.guess deciding that the configuration is i386-*-darwin* and
1076         # then this file using that to set --with-cpu=i386 which has no -m64
1077         # support.
1078         with_cpu=${with_cpu:-generic}
1079         tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
1080         ;;
1081 x86_64-*-darwin*)
1082         with_cpu=${with_cpu:-generic}
1083         tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1084         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1085         ;;
1086 i[34567]86-*-elf*)
1087         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1088         tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1089         ;;
1090 x86_64-*-elf*)
1091         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1092         tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1093         ;;
1094 i[34567]86-*-freebsd*)
1095         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1096         ;;
1097 x86_64-*-freebsd*)
1098         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1099         tmake_file="${tmake_file} i386/t-crtstuff"
1100         ;;
1101 i[34567]86-*-netbsdelf*)
1102         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1103         ;;
1104 i[34567]86-*-netbsd*)
1105         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1106         tmake_file="${tmake_file} t-netbsd"
1107         extra_parts=""
1108         use_collect2=yes
1109         ;;
1110 x86_64-*-netbsd*)
1111         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1112         tmake_file="${tmake_file} i386/t-crtstuff"
1113         ;;
1114 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1115         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1116         # needed to unconfuse gdb
1117         tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1118         # we need collect2 until our bug is fixed...
1119         use_collect2=yes
1120         ;;
1121 i[34567]86-*-openbsd*)
1122         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1123         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1124         gas=yes
1125         gnu_ld=yes
1126         ;;
1127 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1128                         # Intel 80386's running GNU/*
1129                         # with ELF format using glibc 2
1130         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
1131         case ${target} in
1132         i[34567]86-*-linux*)
1133                 if test x$enable_targets = xall; then
1134                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1135                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1136                         tmake_file="${tmake_file} i386/t-linux64"
1137                         need_64bit_hwint=yes
1138                         need_64bit_isa=yes
1139                         case X"${with_cpu}" in
1140                         Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1141                                 ;;
1142                         X)
1143                                 if test x$with_cpu_64 = x; then
1144                                         with_cpu_64=generic
1145                                 fi
1146                                 ;;
1147                         *)
1148                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1149                                 echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1150                                 exit 1
1151                                 ;;
1152                         esac
1153                 else
1154                         tm_file="${tm_file} i386/linux.h"
1155                 fi
1156                 ;;
1157         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1158         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1159         i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1160         i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1161         esac
1162         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1163         ;;
1164 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1165         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
1166                  i386/x86-64.h i386/linux64.h"
1167         case ${target} in
1168         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1169         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1170         esac
1171         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1172         ;;
1173 i[34567]86-pc-msdosdjgpp*)
1174         xm_file=i386/xm-djgpp.h
1175         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1176         tmake_file="${tmake_file} i386/t-djgpp"
1177         extra_options="${extra_options} i386/djgpp.opt"
1178         gnu_ld=yes
1179         gas=yes
1180         use_gcc_stdint=wrap
1181         ;;
1182 i[34567]86-*-lynxos*)
1183         xm_defines=POSIX
1184         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1185         tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1186         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1187         extra_options="${extra_options} lynx.opt"
1188         thread_file=lynx
1189         gnu_ld=yes
1190         gas=yes
1191         ;;
1192 i[3456x]86-*-netware*)
1193         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1194         tmake_file="${tmake_file} i386/t-netware"
1195         extra_objs=netware.o
1196         case /${with_ld} in
1197         */nwld)
1198                 extra_objs="$extra_objs nwld.o"
1199                 tm_file="${tm_file} i386/nwld.h"
1200                 tmake_file="${tmake_file} i386/t-nwld"
1201                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1202                 ;;
1203         esac
1204         case x${enable_threads} in
1205         x | xyes | xposix) thread_file='posix';;
1206         xnks) thread_file='nks';;
1207         xno) ;;
1208         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1209         esac
1210         ;;
1211 i[34567]86-*-nto-qnx*)
1212         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1213         tmake_file="${tmake_file} i386/t-nto"
1214         gnu_ld=yes
1215         gas=yes
1216         ;;
1217 i[34567]86-*-rtems*)
1218         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1219         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1220         tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1221         ;;
1222 i[34567]86-*-solaris2*)
1223         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1224         # Set default arch_32 to pentium4, tune_32 to generic like the other
1225         # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1226         with_arch_32=${with_arch_32:-pentium4}
1227         with_tune_32=${with_tune_32:-generic}
1228         case ${target} in
1229         *-*-solaris2.1[0-9]*)
1230                 tm_file="${tm_file} sol2-10.h"
1231                 ;;
1232         esac
1233         tm_file="${tm_file} i386/sol2.h"
1234         if test x$gnu_ld = xyes; then
1235                 tm_file="${tm_file} sol2-gld.h"
1236         fi
1237         if test x$gas = xyes; then
1238                 tm_file="${tm_file} i386/sol2-gas.h"
1239         fi
1240         tmake_file="${tmake_file} t-sol2 t-svr4"
1241         c_target_objs="${c_target_objs} sol2-c.o"
1242         cxx_target_objs="${cxx_target_objs} sol2-c.o"
1243         extra_objs="sol2.o"
1244         tm_p_file="${tm_p_file} sol2-protos.h"
1245         if test x$gnu_ld = xyes; then
1246                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1247                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1248         else
1249                 tmake_file="$tmake_file t-slibgcc-sld"
1250         fi
1251         if test x$gas = xyes; then
1252                 tm_file="usegas.h ${tm_file}"
1253         fi
1254         tm_file="$tm_file tm-dwarf2.h"
1255         case ${target} in
1256         *-*-solaris2.1[0-9]*)
1257                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1258                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1259                 tmake_file="$tmake_file i386/t-sol2-10"
1260                 # i386/t-crtstuff only affects libgcc.  Its inclusion
1261                 # depends on a runtime test and is thus performed in
1262                 # libgcc/configure.ac instead.
1263                 need_64bit_hwint=yes
1264                 need_64bit_isa=yes
1265                 use_gcc_stdint=wrap
1266                 case X"${with_cpu}" in
1267                 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1268                         ;;
1269                 X)
1270                         if test x$with_cpu_64 = x; then
1271                                 with_cpu_64=generic
1272                         fi
1273                         ;;
1274                 *)
1275                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1276                         echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1277                         exit 1
1278                         ;;
1279                 esac
1280                 ;;
1281         *)
1282                 use_gcc_stdint=provide
1283                 ;;
1284         esac
1285         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1286           "":yes:* | yes:yes:* )
1287                 thread_file=posix
1288                 ;;
1289           "":*:yes | yes:*:yes )
1290                 thread_file=solaris
1291                 ;;
1292         esac
1293         ;;
1294 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1295         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1296         case ${target} in
1297           *-vxworksae*)
1298             tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1299             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1300             ;;
1301           *)
1302             tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1303             tmake_file="${tmake_file} i386/t-vxworks"
1304             ;;
1305         esac
1306         ;;
1307 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1308         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1309         xm_file=i386/xm-cygwin.h
1310         # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1311         if test x$sjlj = x0; then
1312                 tmake_eh_file="i386/t-dw2-eh"
1313         else
1314                 tmake_eh_file="i386/t-sjlj-eh"
1315         fi
1316         tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
1317         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1318         extra_options="${extra_options} i386/cygming.opt"
1319         extra_objs="winnt.o winnt-stubs.o"
1320         c_target_objs="${c_target_objs} cygwin2.o msformat-c.o"
1321         cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o"
1322         extra_gcc_objs=cygwin1.o
1323         if test x$enable_threads = xyes; then
1324                 thread_file='posix'
1325         fi
1326         use_gcc_stdint=wrap
1327         lto_binary_reader=lto-coff
1328         ;;
1329 i[34567]86-*-mingw* | x86_64-*-mingw*)
1330         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1331         xm_file=i386/xm-mingw32.h
1332         case ${target} in
1333                 x86_64-*-* | *-w64-*)
1334                         need_64bit_hwint=yes
1335                         need_64bit_isa=yes
1336                         ;;
1337                 *)
1338                         ;;
1339         esac
1340         # This makes the logic if mingw's or the w64 feature set has to be used
1341         case ${target} in
1342                 *-w64-*)
1343                         tm_file="${tm_file} i386/mingw-w64.h"
1344                         if test x$enable_targets = xall; then
1345                                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1346                                 case X"${with_cpu}" in
1347                                 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1348                                         ;;
1349                                 X)
1350                                         if test x$with_cpu_64 = x; then
1351                                                 with_cpu_64=generic
1352                                         fi
1353                                         ;;
1354                                 *)
1355                                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1356                                         echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1357                                         exit 1
1358                                         ;;
1359                                 esac
1360                         fi
1361                         ;;
1362                 *)
1363                         ;;
1364         esac
1365         tm_file="${tm_file} i386/mingw-stdint.h"
1366         # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1367         if test x$sjlj = x0; then
1368                 tmake_eh_file="i386/t-dw2-eh"
1369         else
1370                 tmake_eh_file="i386/t-sjlj-eh"
1371         fi
1372         tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
1373         case ${target} in
1374                *-w64-*)
1375                         tmake_file="${tmake_file} i386/t-mingw-w64"
1376                         ;;
1377                *)
1378                         tmake_file="${tmake_file} i386/t-mingw32"
1379                         ;;
1380         esac
1381         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1382         extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1383         case ${target} in
1384                 *-w64-*)
1385                         extra_options="${extra_options} i386/mingw-w64.opt"
1386                         ;;
1387                 *)
1388                         ;;
1389         esac
1390         extra_objs="winnt.o winnt-stubs.o"
1391         c_target_objs="${c_target_objs} msformat-c.o"
1392         cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1393         default_use_cxa_atexit=yes
1394         use_gcc_stdint=wrap
1395         lto_binary_reader=lto-coff
1396         case ${enable_threads} in
1397           "" | yes | win32)       thread_file='win32'
1398           tmake_file="${tmake_file} i386/t-gthr-win32"
1399           ;;
1400         esac
1401         case ${target} in
1402                 x86_64-*-mingw*)
1403                         tmake_file="${tmake_file} i386/t-crtfm"
1404                         ;;
1405                 *)
1406                         ;;
1407         esac
1408         case ${target} in
1409                 *mingw32crt*)
1410                         tm_file="${tm_file} i386/crtdll.h"
1411                         ;;
1412                 *mingw32msv* | *mingw*)
1413                         ;;
1414         esac
1415         ;;
1416 i[34567]86-*-interix3*)
1417         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1418         tmake_file="${tmake_file} i386/t-interix"
1419         extra_objs=winnt.o
1420         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1421         if test x$enable_threads = xyes ; then
1422                 thread_file='posix'
1423         fi
1424         if test x$stabs = xyes ; then
1425                 tm_file="${tm_file} dbxcoff.h"
1426         fi
1427         ;;
1428 ia64*-*-elf*)
1429         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1430         tmake_file="ia64/t-ia64"
1431         target_cpu_default="0"
1432         if test x$gas = xyes
1433         then
1434                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1435         fi
1436         if test x$gnu_ld = xyes
1437         then
1438                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1439         fi
1440         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1441         ;;
1442 ia64*-*-freebsd*)
1443         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1444         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1445         tmake_file="${tmake_file} ia64/t-ia64"
1446         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1447         ;;
1448 ia64*-*-linux*)
1449         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1450         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1451         if test x$with_system_libunwind != xyes ; then
1452                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1453         fi
1454         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1455         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1456         ;;
1457 ia64*-*-hpux*)
1458         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1459         tmake_file="ia64/t-ia64 ia64/t-hpux"
1460         target_cpu_default="MASK_GNU_AS"
1461         case x$enable_threads in
1462         x | xyes | xposix )
1463                 thread_file=posix
1464                 ;;
1465         esac
1466         use_collect2=no
1467         c_target_objs="ia64-c.o"
1468         cxx_target_objs="ia64-c.o"
1469         extra_options="${extra_options} ia64/ilp32.opt"
1470         use_gcc_stdint=wrap
1471         tm_file="${tm_file} hpux-stdint.h"
1472         ;;
1473 ia64-hp-*vms*)
1474         tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1475         xm_file="vms/xm-vms.h vms/xm-vms64.h"
1476         tmake_file="vms/t-vms vms/t-vms64 ia64/t-ia64 ia64/t-vms"
1477         xmake_file=vms/x-vms
1478         target_cpu_default="0"
1479         if test x$gas = xyes
1480         then
1481                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1482         fi
1483         exeext=.exe
1484         install_headers_dir=install-headers-cp
1485         extra_options="${extra_options} vms/vms.opt"
1486         ;;
1487 iq2000*-*-elf*)
1488         tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
1489         tmake_file=iq2000/t-iq2000
1490         out_file=iq2000/iq2000.c
1491         md_file=iq2000/iq2000.md
1492         ;;
1493 lm32-*-elf*)
1494         tm_file="dbxelf.h elfos.h ${tm_file}"
1495         tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1496         ;;
1497 lm32-*-rtems*)
1498         tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h"
1499         tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1500         tmake_file="${tmake_file} t-rtems"
1501          ;;
1502 lm32-*-uclinux*)
1503         tm_file="dbxelf.h elfos.h ${tm_file} linux.h lm32/uclinux-elf.h"
1504         tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1505         ;;
1506 m32r-*-elf*)
1507         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1508         extra_parts="crtinit.o crtfini.o"
1509         ;;
1510 m32rle-*-elf*)
1511         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
1512         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1513         ;;
1514 m32r-*-rtems*)
1515         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1516         tmake_file="m32r/t-m32r t-rtems"
1517         extra_parts="crtinit.o crtfini.o"
1518         ;;
1519 m32r-*-linux*)
1520         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1521         # We override the tmake_file for linux -- why?
1522         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1523         gnu_ld=yes
1524         if test x$enable_threads = xyes; then
1525                 thread_file='posix'
1526         fi
1527         ;;
1528 m32rle-*-linux*)
1529         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1530         # We override the tmake_file for linux -- why?
1531         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1532         gnu_ld=yes
1533         if test x$enable_threads = xyes; then
1534                 thread_file='posix'
1535         fi
1536         ;;
1537 # m68hc11 and m68hc12 share the same machine description.
1538 m68hc11-*-*|m6811-*-*)
1539         tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1540         tm_p_file="m68hc11/m68hc11-protos.h"
1541         md_file="m68hc11/m68hc11.md"
1542         out_file="m68hc11/m68hc11.c"
1543         tmake_file="m68hc11/t-m68hc11"
1544         use_gcc_stdint=wrap
1545         ;;
1546 m68hc12-*-*|m6812-*-*)
1547         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1548         tm_p_file="m68hc11/m68hc11-protos.h"
1549         md_file="m68hc11/m68hc11.md"
1550         out_file="m68hc11/m68hc11.c"
1551         tmake_file="m68hc11/t-m68hc11"
1552         extra_options="${extra_options} m68hc11/m68hc11.opt"
1553         use_gcc_stdint=wrap
1554         ;;
1555 m68k-*-elf* | fido-*-elf*)
1556         case ${target} in
1557         fido-*-elf*)
1558                 # Check that $with_cpu makes sense.
1559                 case $with_cpu in
1560                 "" | "fidoa")
1561                         ;;
1562                 *)
1563                         echo "Cannot accept --with-cpu=$with_cpu"
1564                         exit 1
1565                         ;;
1566                 esac
1567                 with_cpu=fidoa
1568                 ;;
1569         *)
1570                 default_m68k_cpu=68020
1571                 default_cf_cpu=5206
1572                 ;;
1573         esac
1574         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1575         tm_defines="${tm_defines} MOTOROLA=1"
1576         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1577         # Add multilibs for targets other than fido.
1578         case ${target} in
1579         fido-*-elf*)
1580                 ;;
1581         *)
1582                 tmake_file="$tmake_file m68k/t-mlibs"
1583                 ;;
1584         esac
1585         extra_parts="crtbegin.o crtend.o"
1586         ;;
1587 m68k*-*-netbsdelf*)
1588         default_m68k_cpu=68020
1589         default_cf_cpu=5475
1590         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1591         tm_defines="${tm_defines} MOTOROLA=1"
1592         ;;
1593 m68k*-*-openbsd*)
1594         default_m68k_cpu=68020
1595         default_cf_cpu=5475
1596         # needed to unconfuse gdb
1597         tm_defines="${tm_defines} OBSD_OLD_GAS"
1598         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1599         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1600         # we need collect2 until our bug is fixed...
1601         use_collect2=yes
1602         ;;
1603 m68k-*-uclinuxoldabi*)          # Motorola m68k/ColdFire running uClinux
1604                                 # with uClibc, using the original
1605                                 # m68k-elf-based ABI
1606         default_m68k_cpu=68020
1607         default_cf_cpu=5206
1608         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1609         tm_defines="${tm_defines} MOTOROLA=1"
1610         tmake_file="m68k/t-floatlib m68k/t-uclinux"
1611         ;;
1612 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1613                                 # with uClibc, using the new GNU/Linux-style
1614                                 # ABI.
1615         default_m68k_cpu=68020
1616         default_cf_cpu=5206
1617         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1618         tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
1619         extra_options="${extra_options} linux.opt"
1620         tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1621         ;;
1622 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1623                                 # with ELF format using glibc 2
1624                                 # aka the GNU/Linux C library 6.
1625         default_m68k_cpu=68020
1626         default_cf_cpu=5475
1627         with_arch=${with_arch:-m68k}
1628         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1629         extra_options="${extra_options} m68k/ieee.opt"
1630         tm_defines="${tm_defines} MOTOROLA=1"
1631         tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1632         # if not configured with --enable-sjlj-exceptions, bump the
1633         # libgcc version number
1634         if test x$sjlj != x1; then
1635             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1636         fi
1637         ;;
1638 m68k-*-rtems*)
1639         default_m68k_cpu=68020
1640         default_cf_cpu=5206
1641         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1642         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1643         tm_defines="${tm_defines} MOTOROLA=1"
1644         extra_parts="crtbegin.o crtend.o"
1645         ;;
1646 mcore-*-elf)
1647         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1648         tmake_file=mcore/t-mcore
1649         inhibit_libc=true
1650         ;;
1651 mcore-*-pe*)
1652         tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1653         tmake_file=mcore/t-mcore-pe
1654         inhibit_libc=true
1655         use_gcc_stdint=wrap
1656         ;;
1657 mep-*-*)
1658         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1659         tmake_file=mep/t-mep
1660         extra_parts="crtbegin.o crtend.o"
1661         c_target_objs="mep-pragma.o"
1662         cxx_target_objs="mep-pragma.o"
1663         if test -d "${srcdir}/../newlib/libc/include" &&
1664            test "x$with_headers" = x; then
1665                 with_headers=yes
1666         fi
1667         use_gcc_stdint=wrap
1668         ;;
1669 mips-sgi-irix6.5*)
1670         tm_file="elfos.h ${tm_file} mips/iris6.h"
1671         tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
1672         target_cpu_default="MASK_ABICALLS"
1673         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1674         # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1675         use_gcc_stdint=wrap
1676         if test "x$stabs" = xyes
1677         then
1678                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1679         fi
1680         if test "x$gnu_ld" = xyes
1681         then
1682                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1683         fi
1684         case ${enable_threads}:${have_pthread_h} in
1685           "":yes | yes:yes ) thread_file=posix ;;
1686         esac
1687         ;;
1688 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1689         target_cpu_default="MASK_ABICALLS"
1690         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1691         ;;
1692 mips64*-*-linux* | mipsisa64*-*-linux*)
1693         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1694         tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1695         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1696         case ${target} in
1697                 mips64el-st-linux-gnu)
1698                         tm_file="${tm_file} mips/st.h"
1699                         tmake_file="${tmake_file} mips/t-st"
1700                         ;;
1701                 mips64octeon*-*-linux*)
1702                         tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1703                         target_cpu_default=MASK_SOFT_FLOAT_ABI
1704                         ;;
1705                 mipsisa64r2*-*-linux*)
1706                         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1707                         ;;
1708         esac
1709         gnu_ld=yes
1710         gas=yes
1711         test x$with_llsc != x || with_llsc=yes
1712         ;;
1713 mips*-*-linux*)                         # Linux MIPS, either endian.
1714         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1715         tmake_file="${tmake_file} mips/t-libgcc-mips16"
1716         case ${target} in
1717         mipsisa32r2*)
1718                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1719                 ;;
1720         mipsisa32*)
1721                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1722         esac
1723         test x$with_llsc != x || with_llsc=yes
1724         ;;
1725 mips*-*-openbsd*)
1726         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1727         target_cpu_default="MASK_ABICALLS"
1728         tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1729         case ${target} in
1730         mips*el-*-openbsd*)
1731             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1732         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1733         esac
1734         ;;
1735 mips*-sde-elf*)
1736         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1737         tmake_file="mips/t-sde mips/t-libgcc-mips16"
1738         case "${with_newlib}" in
1739           yes)
1740             # newlib / libgloss.
1741             ;;
1742           *)
1743             # MIPS toolkit libraries.
1744             tm_file="$tm_file mips/sdemtk.h"
1745             tmake_file="$tmake_file mips/t-sdemtk"
1746             extra_options="$extra_options mips/sdemtk.opt"
1747             case ${enable_threads} in
1748               "" | yes | mipssde)
1749                 thread_file='mipssde'
1750                 ;;
1751             esac
1752             ;;
1753         esac
1754         case ${target} in
1755           mipsisa32r2*)
1756             tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1757             ;;
1758           mipsisa32*)
1759             tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1760             ;;
1761           mipsisa64r2*)
1762             tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1763             ;;
1764           mipsisa64*)
1765             tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1766             ;;
1767         esac
1768         ;;
1769 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1770 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1771 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1772 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1773         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1774         tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1775         case ${target} in
1776           mipsisa32r2*)
1777             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1778             ;;
1779           mipsisa32*)
1780             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1781             ;;
1782           mipsisa64r2*)
1783             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1784             ;;
1785           mipsisa64*)
1786             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1787             ;;
1788         esac
1789         case ${target} in
1790           mipsisa32*-*-elfoabi*)
1791             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1792             tm_file="${tm_file} mips/elfoabi.h"
1793             ;;
1794           mipsisa64*-*-elfoabi*)
1795             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1796             tm_file="${tm_file} mips/elfoabi.h"
1797             ;;
1798           *-*-elf*)
1799             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1800             ;;
1801         esac
1802         ;;
1803 mipsisa64sr71k-*-elf*)
1804         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1805         tmake_file=mips/t-sr71k
1806         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1807         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1808         ;;
1809 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1810         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1811         tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1812         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1813         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1814         ;;
1815 mips-*-elf* | mipsel-*-elf*)
1816         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1817         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1818         ;;
1819 mips64-*-elf* | mips64el-*-elf*)
1820         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1821         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1822         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1823         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1824         ;;
1825 mips64vr-*-elf* | mips64vrel-*-elf*)
1826         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1827         tmake_file=mips/t-vr
1828         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1829         ;;
1830 mips64orion-*-elf* | mips64orionel-*-elf*)
1831         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1832         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1833         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1834         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1835         ;;
1836 mips*-*-rtems*)
1837         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1838         tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1839         ;;
1840 mips-wrs-vxworks)
1841         tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1842         tmake_file="${tmake_file} mips/t-vxworks"
1843         ;;
1844 mipstx39-*-elf* | mipstx39el-*-elf*)
1845         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1846         tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1847         ;;
1848 mmix-knuth-mmixware)
1849         tm_file="${tm_file} newlib-stdint.h"
1850         need_64bit_hwint=yes
1851         use_gcc_stdint=wrap
1852         ;;
1853 mn10300-*-*)
1854         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1855         if test x$stabs = xyes
1856         then
1857                 tm_file="${tm_file} dbx.h"
1858         fi
1859         use_collect2=no
1860         use_gcc_stdint=wrap
1861         ;;
1862 pdp11-*-*)
1863         tm_file="${tm_file} newlib-stdint.h"
1864         use_gcc_stdint=wrap
1865         ;;
1866 picochip-*)
1867         tm_file="${tm_file} newlib-stdint.h"
1868         use_gcc_stdint=wrap
1869         ;;
1870 # port not yet contributed
1871 #powerpc-*-openbsd*)
1872 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1873 #       extra_headers=
1874 #       ;;
1875 powerpc-*-darwin*)
1876         extra_options="${extra_options} rs6000/darwin.opt"
1877         extra_parts="crt2.o"
1878         case ${target} in
1879           *-darwin1[0-9]* | *-darwin[8-9]*)
1880             tmake_file="${tmake_file} rs6000/t-darwin8"
1881             tm_file="${tm_file} rs6000/darwin8.h"
1882             ;;
1883           *-darwin7*)
1884             tm_file="${tm_file} rs6000/darwin7.h"
1885             ;;
1886           *-darwin[0-6]*)
1887             ;;
1888         esac
1889         extra_headers=altivec.h
1890         ;;
1891 powerpc64-*-darwin*)
1892         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1893         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1894         # We're omitting t-darwin8 to avoid building any multilibs
1895         extra_headers=altivec.h
1896         ;;
1897 powerpc*-*-freebsd*)
1898         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1899         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1900         extra_options="${extra_options} rs6000/sysv4.opt"
1901         ;;
1902 powerpc-*-netbsd*)
1903         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1904         tmake_file="${tmake_file} rs6000/t-netbsd"
1905         extra_options="${extra_options} rs6000/sysv4.opt"
1906         ;;
1907 powerpc-*-eabispe*)
1908         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1909         extra_options="${extra_options} rs6000/sysv4.opt"
1910         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1911         use_gcc_stdint=wrap
1912         ;;
1913 powerpc-*-eabisimaltivec*)
1914         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1915         extra_options="${extra_options} rs6000/sysv4.opt"
1916         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1917         use_gcc_stdint=wrap
1918         ;;
1919 powerpc-*-eabisim*)
1920         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1921         extra_options="${extra_options} rs6000/sysv4.opt"
1922         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1923         use_gcc_stdint=wrap
1924         ;;
1925 powerpc-*-elf*)
1926         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
1927         extra_options="${extra_options} rs6000/sysv4.opt"
1928         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1929         ;;
1930 powerpc-*-eabialtivec*)
1931         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1932         extra_options="${extra_options} rs6000/sysv4.opt"
1933         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1934         use_gcc_stdint=wrap
1935         ;;
1936 powerpc-xilinx-eabi*)
1937         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
1938         extra_options="${extra_options} rs6000/sysv4.opt"
1939         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
1940         use_gcc_stdint=wrap
1941         ;;
1942 powerpc-*-eabi*)
1943         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1944         extra_options="${extra_options} rs6000/sysv4.opt"
1945         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1946         use_gcc_stdint=wrap
1947         ;;
1948 powerpc-*-rtems*)
1949         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1950         extra_options="${extra_options} rs6000/sysv4.opt"
1951         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1952         ;;
1953 powerpc-*-linux* | powerpc64-*-linux*)
1954         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1955         extra_options="${extra_options} rs6000/sysv4.opt"
1956         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1957         maybe_biarch=yes
1958         case ${target} in
1959             powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
1960                 echo "*** Configuration ${target} not supported" 1>&2
1961                 exit 1
1962                 ;;
1963             powerpc-*-linux*spe* | powerpc-*-linux*paired*)
1964                 maybe_biarch=
1965                 ;;
1966             powerpc64-*-linux*)
1967                 test x$with_cpu != x || cpu_is_64bit=yes
1968                 maybe_biarch=always
1969                 ;;
1970         esac
1971         case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
1972             always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
1973                 if test x$cpu_is_64bit = xyes; then
1974                     tm_file="${tm_file} rs6000/default64.h"
1975                 fi
1976                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
1977                 tmake_file="$tmake_file rs6000/t-linux64"
1978                 extra_options="${extra_options} rs6000/linux64.opt"
1979                 ;;
1980             *)
1981                 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
1982                 ;;
1983         esac
1984         tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
1985         case ${target} in
1986             powerpc*-*-linux*altivec*)
1987                 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
1988             powerpc*-*-linux*spe*)
1989                 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
1990             powerpc*-*-linux*paired*)
1991                 tm_file="${tm_file} rs6000/750cl.h" ;;
1992         esac
1993         if test x${enable_secureplt} = xyes; then
1994                 tm_file="rs6000/secureplt.h ${tm_file}"
1995         fi
1996         ;;
1997 powerpc64-*-gnu*)
1998         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
1999         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
2000         tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
2001         ;;
2002 powerpc-*-gnu-gnualtivec*)
2003         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
2004         extra_options="${extra_options} rs6000/sysv4.opt"
2005         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2006         if test x$enable_threads = xyes; then
2007                 thread_file='posix'
2008         fi
2009         ;;
2010 powerpc-*-gnu*)
2011         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
2012         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2013         extra_options="${extra_options} rs6000/sysv4.opt"
2014         if test x$enable_threads = xyes; then
2015                 thread_file='posix'
2016         fi
2017         ;;
2018 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2019         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
2020         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
2021         extra_options="${extra_options} rs6000/sysv4.opt"
2022         extra_headers=ppc-asm.h
2023         case ${target} in
2024           *-vxworksae*)
2025             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
2026             tmake_file="${tmake_file} rs6000/t-vxworksae"
2027             ;;
2028           *-vxworks*)
2029             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2030             ;;
2031         esac
2032         ;;
2033 powerpc-*-lynxos*)
2034         xm_defines=POSIX
2035         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2036         tmake_file="t-lynx rs6000/t-lynx"
2037         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2038         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2039         extra_options="${extra_options} lynx.opt"
2040         thread_file=lynx
2041         gnu_ld=yes
2042         gas=yes
2043         ;;
2044 powerpcle-*-elf*)
2045         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2046         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2047         extra_options="${extra_options} rs6000/sysv4.opt"
2048         ;;
2049 powerpcle-*-eabisim*)
2050         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2051         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2052         extra_options="${extra_options} rs6000/sysv4.opt"
2053         use_gcc_stdint=wrap
2054         ;;
2055 powerpcle-*-eabi*)
2056         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2057         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2058         extra_options="${extra_options} rs6000/sysv4.opt"
2059         use_gcc_stdint=wrap
2060         ;;
2061 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2062         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2063         tmake_file=rs6000/t-aix43
2064         extra_options="${extra_options} rs6000/aix64.opt"
2065         use_collect2=yes
2066         thread_file='aix'
2067         use_gcc_stdint=provide
2068         extra_headers=
2069         ;;
2070 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2071         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2072         extra_options="${extra_options} rs6000/aix64.opt"
2073         tmake_file=rs6000/t-aix43
2074         use_collect2=yes
2075         thread_file='aix'
2076         use_gcc_stdint=wrap
2077         extra_headers=
2078         ;;
2079 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2080         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2081         tmake_file=rs6000/t-aix52
2082         extra_options="${extra_options} rs6000/aix64.opt"
2083         use_collect2=yes
2084         thread_file='aix'
2085         use_gcc_stdint=wrap
2086         extra_headers=
2087         ;;
2088 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2089         tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2090         tmake_file=rs6000/t-aix52
2091         extra_options="${extra_options} rs6000/aix64.opt"
2092         use_collect2=yes
2093         thread_file='aix'
2094         use_gcc_stdint=wrap
2095         extra_headers=altivec.h
2096         ;;
2097 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2098         tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2099         tmake_file=rs6000/t-aix52
2100         extra_options="${extra_options} rs6000/aix64.opt"
2101         use_collect2=yes
2102         thread_file='aix'
2103         use_gcc_stdint=wrap
2104         extra_headers=altivec.h
2105         ;;
2106 rx-*-elf*)
2107         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
2108         tmake_file="${tmake_file} rx/t-rx"
2109         ;;
2110 s390-*-linux*)
2111         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2112         ;;
2113 s390x-*-linux*)
2114         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2115         tm_p_file=s390/s390-protos.h
2116         md_file=s390/s390.md
2117         extra_modes=s390/s390-modes.def
2118         out_file=s390/s390.c
2119         tmake_file="${tmake_file} s390/t-linux64"
2120         ;;
2121 s390x-ibm-tpf*)
2122         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2123         tm_p_file=s390/s390-protos.h
2124         md_file=s390/s390.md
2125         extra_modes=s390/s390-modes.def
2126         out_file=s390/s390.c
2127         extra_parts="crtbeginS.o crtendS.o"
2128         thread_file='tpf'
2129         extra_options="${extra_options} s390/tpf.opt"
2130         ;;
2131 score-*-elf)
2132         tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2133         tmake_file=score/t-score-elf
2134         extra_objs="score7.o score3.o"
2135         ;;
2136 sh-*-elf* | sh[12346l]*-*-elf* | \
2137 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2138   sh-*-linux* | sh[2346lbe]*-*-linux* | \
2139   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2140    sh64-*-netbsd* | sh64l*-*-netbsd*)
2141         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2142         if test x${with_endian} = x; then
2143                 case ${target} in
2144                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2145                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2146                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2147                 shl* | sh64l* | sh*-*-linux* | \
2148                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2149                 sh[1234]*-*-*)                     with_endian=big ;;
2150                 *)                                 with_endian=big,little ;;
2151                 esac
2152         fi
2153         # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2154         #  First word : the default endian.
2155         #  Second word: the secondary endian (optional).
2156         case ${with_endian} in
2157         big)            TM_ENDIAN_CONFIG=mb ;;
2158         little)         TM_ENDIAN_CONFIG=ml ;;
2159         big,little)     TM_ENDIAN_CONFIG="mb ml" ;;
2160         little,big)     TM_ENDIAN_CONFIG="ml mb" ;;
2161         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2162         esac
2163         case ${with_endian} in
2164         little*)        tm_file="sh/little.h ${tm_file}" ;;
2165         esac
2166         tm_file="${tm_file} dbxelf.h elfos.h"
2167         case ${target} in
2168         sh*-*-netbsd*)  ;;
2169         *)              tm_file="${tm_file} svr4.h" ;;
2170         esac
2171         tm_file="${tm_file} sh/elf.h"
2172         case ${target} in
2173         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2174                         tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
2175         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2176         sh*-superh-elf) if test x$with_libgloss != xno; then
2177                                 with_libgloss=yes
2178                                 tm_file="${tm_file} sh/newlib.h"
2179                         fi
2180                         tm_file="${tm_file} sh/embed-elf.h"
2181                         tm_file="${tm_file} sh/superh.h"
2182                         tmake_file="${tmake_file} sh/t-superh"
2183                         extra_options="${extra_options} sh/superh.opt" ;;
2184         *)              if test x$with_newlib = xyes \
2185                            && test x$with_libgloss = xyes; then
2186                                 tm_file="${tm_file} sh/newlib.h"
2187                         fi
2188                         tm_file="${tm_file} sh/embed-elf.h" ;;
2189         esac
2190         case ${target} in
2191         sh5*-*-netbsd*)
2192                 # SHmedia, 32-bit ABI
2193                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2194                 ;;
2195         sh64*-netbsd*)
2196                 # SHmedia, 64-bit ABI
2197                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2198                 ;;
2199         *-*-netbsd)
2200                 tmake_file="${tmake_file} sh/t-netbsd"
2201                 ;;
2202         sh64*-*-linux*)
2203                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2204                 tm_file="${tm_file} sh/sh64.h"
2205                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2206                 ;;
2207         sh64*)
2208                 tmake_file="${tmake_file} sh/t-sh64"
2209                 tm_file="${tm_file} sh/sh64.h"
2210                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2211                 ;;
2212         *-*-symbianelf*)
2213                 tmake_file="sh/t-symbian"
2214                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2215                 c_target_objs="symbian-base.o symbian-c.o"
2216                 cxx_target_objs="symbian-base.o symbian-cxx.o"
2217                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2218                 ;;
2219         *-*-elf*)
2220                 tm_file="${tm_file} newlib-stdint.h"
2221                 ;;
2222         esac
2223         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2224         case `echo ${target} | sed 's/e[lb]-/-/'` in
2225         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2226         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2227         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2228         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2229         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2230         sh4al)                  sh_cpu_target=sh4al ;;
2231         sh4a*)                  sh_cpu_target=sh4a ;;
2232         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2233         sh4_single*)            sh_cpu_target=sh4-single ;;
2234         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2235         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2236         sh3e*)                  sh_cpu_target=sh3e ;;
2237         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2238         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2239         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2240         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2241         sh2a*)                  sh_cpu_target=sh2a ;;
2242         sh2e*)                  sh_cpu_target=sh2e ;;
2243         sh2*)                   sh_cpu_target=sh2 ;;
2244         *)                      sh_cpu_target=sh1 ;;
2245         esac
2246         # did the user say --without-fp ?
2247         if test x$with_fp = xno; then
2248                 case ${sh_cpu_target} in
2249                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2250                 sh4al | sh1)    ;;
2251                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2252                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2253                 sh3*)           sh_cpu_target=sh3 ;;
2254                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2255                 sh2*)           sh_cpu_target=sh2 ;;
2256                 *)      echo --without-fp not available for $target: ignored
2257                 esac
2258                 tm_defines="$tm_defines STRICT_NOFPU=1"
2259         fi
2260         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2261         case $sh_cpu_default in
2262         sh5-64media-nofpu | sh5-64media | \
2263           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2264           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2265           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2266           sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2267           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2268         "")     sh_cpu_default=${sh_cpu_target} ;;
2269         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2270         esac
2271         sh_multilibs=${with_multilib_list}
2272         if test "$sh_multilibs" = "default" ; then
2273                 case ${target} in
2274                 sh64-superh-linux* | \
2275                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2276                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2277                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2278                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2279                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2280                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2281                 esac
2282                 if test x$with_fp = xno; then
2283                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2284                 fi
2285         fi
2286         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2287         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2288         tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2289         sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^sh/m/i' -e 's/ sh/ m/gi' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2290         for sh_multilib in ${sh_multilibs}; do
2291                 case ${sh_multilib} in
2292                 m1 | m2 | m2e | m3 | m3e | \
2293                 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2294                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2295                 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2296                 m5-64media | m5-64media-nofpu | \
2297                 m5-32media | m5-32media-nofpu | \
2298                 m5-compact | m5-compact-nofpu)
2299                         # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2300                         # It is passed to MULTIILIB_OPTIONS verbatim.
2301                         TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2302                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2303                         ;;
2304                 \!*)    # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2305                         # It is passed the MULTILIB_EXCEPTIONS verbatim.
2306                         TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2307                 *)
2308                         echo "with_multilib_list=${sh_multilib} not supported."
2309                         exit 1
2310                         ;;
2311                 esac
2312         done
2313         TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2314         if test x${enable_incomplete_targets} = xyes ; then
2315                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2316         fi
2317         tm_file="$tm_file ./sysroot-suffix.h"
2318         tmake_file="$tmake_file t-sysroot-suffix"
2319         ;;
2320 sh-*-rtems*)
2321         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2322         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2323         ;;
2324 sh-wrs-vxworks)
2325         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2326         tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2327         ;;
2328 sparc-*-netbsdelf*)
2329         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2330         extra_options="${extra_options} sparc/long-double-switch.opt"
2331         ;;
2332 sparc64-*-openbsd*)
2333         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2334         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2335         extra_options="${extra_options} sparc/little-endian.opt"
2336         gas=yes gnu_ld=yes
2337         with_cpu=ultrasparc
2338         ;;
2339 sparc-*-elf*)
2340         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2341         tmake_file="sparc/t-elf sparc/t-crtfm"
2342         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2343         ;;
2344 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2345         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
2346         extra_options="${extra_options} sparc/long-double-switch.opt"
2347         tmake_file="${tmake_file} sparc/t-linux"
2348         if test x$enable_targets = xall; then
2349                 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2350                 tmake_file="${tmake_file} sparc/t-linux64"
2351         else
2352                 tm_file="${tm_file} sparc/linux.h"
2353         fi
2354         tmake_file="${tmake_file} sparc/t-crtfm"
2355         ;;
2356 sparc-*-rtems*)
2357         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2358         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2359         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2360         ;;
2361 sparc*-*-solaris2*)
2362         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2363         case ${target} in
2364             *-*-solaris2.1[0-9]*)
2365                 tm_file="${tm_file} sol2-10.h"
2366                 use_gcc_stdint=wrap
2367                 ;;
2368             *)
2369                 use_gcc_stdint=provide
2370                 ;;
2371         esac
2372         tm_file="${tm_file} sparc/sol2.h"
2373         case ${target} in
2374             sparc64-*-* | sparcv9-*-*)
2375                 tm_file="${tm_file} sparc/sol2-64.h"
2376                 ;;
2377             *)
2378                 test x$with_cpu != x || with_cpu=v9
2379                 ;;
2380         esac
2381         tm_file="${tm_file} sparc/sol2-bi.h"
2382         if test x$gas = xyes; then
2383                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2384         fi
2385         if test x$gnu_ld = xyes; then
2386                 tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
2387         fi
2388         tm_file="${tm_file} tm-dwarf2.h"
2389         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2390         if test x$gnu_ld = xyes; then
2391                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2392         else
2393                 tmake_file="$tmake_file t-slibgcc-sld"
2394         fi
2395         if test x$gas = xyes; then
2396                 tm_file="usegas.h ${tm_file}"
2397         fi
2398         c_target_objs="sol2-c.o"
2399         cxx_target_objs="sol2-c.o"
2400         extra_objs="sol2.o"
2401         tm_p_file="${tm_p_file} sol2-protos.h"
2402         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2403         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2404           "":yes:* | yes:yes:* )
2405                 thread_file=posix
2406                 ;;
2407           "":*:yes | yes:*:yes )
2408                 thread_file=solaris
2409                 ;;
2410         esac
2411         ;;
2412 sparc-wrs-vxworks)
2413         tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2414         tmake_file="${tmake_file} sparc/t-vxworks"
2415         ;;
2416 sparc64-*-elf*)
2417         tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2418         extra_options="${extra_options} sparc/little-endian.opt"
2419         tmake_file="${tmake_file} sparc/t-crtfm"
2420         extra_parts="crtbegin.o crtend.o"
2421         ;;
2422 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2423         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2424         extra_options="${extra_options} sparc/long-double-switch.opt"
2425         tmake_file="${tmake_file} sparc/t-crtfm"
2426         case "x$with_cpu" in
2427                 xultrasparc) ;;
2428                 x) with_cpu=ultrasparc ;;
2429                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2430         esac
2431         ;;
2432 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2433         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
2434         extra_options="${extra_options} sparc/long-double-switch.opt"
2435         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2436         ;;
2437 sparc64-*-netbsd*)
2438         tm_file="sparc/biarch64.h ${tm_file}"
2439         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2440         extra_options="${extra_options} sparc/long-double-switch.opt"
2441         tmake_file="${tmake_file} sparc/t-netbsd64"
2442         ;;
2443 spu-*-elf*)
2444         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2445         tmake_file="spu/t-spu-elf"
2446         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2447         extra_modes=spu/spu-modes.def
2448         c_target_objs="${c_target_objs} spu-c.o"
2449         cxx_target_objs="${cxx_target_objs} spu-c.o"
2450         ;;
2451 v850e1-*-*)
2452         target_cpu_default="TARGET_CPU_v850e1"
2453         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2454         tm_p_file=v850/v850-protos.h
2455         tmake_file=v850/t-v850e
2456         md_file=v850/v850.md
2457         out_file=v850/v850.c
2458         extra_options="${extra_options} v850/v850.opt"
2459         if test x$stabs = xyes
2460         then
2461                 tm_file="${tm_file} dbx.h"
2462         fi
2463         use_collect2=no
2464         c_target_objs="v850-c.o"
2465         cxx_target_objs="v850-c.o"
2466         use_gcc_stdint=wrap
2467         ;;
2468 v850e-*-*)
2469         target_cpu_default="TARGET_CPU_v850e"
2470         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2471         tm_p_file=v850/v850-protos.h
2472         tmake_file=v850/t-v850e
2473         md_file=v850/v850.md
2474         out_file=v850/v850.c
2475         extra_options="${extra_options} v850/v850.opt"
2476         if test x$stabs = xyes
2477         then
2478                 tm_file="${tm_file} dbx.h"
2479         fi
2480         use_collect2=no
2481         c_target_objs="v850-c.o"
2482         cxx_target_objs="v850-c.o"
2483         use_gcc_stdint=wrap
2484         ;;
2485 v850-*-*)
2486         target_cpu_default="TARGET_CPU_generic"
2487         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2488         tmake_file=v850/t-v850
2489         if test x$stabs = xyes
2490         then
2491                 tm_file="${tm_file} dbx.h"
2492         fi
2493         use_collect2=no
2494         c_target_objs="v850-c.o"
2495         cxx_target_objs="v850-c.o"
2496         use_gcc_stdint=wrap
2497         ;;
2498 vax-*-linux*)
2499         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
2500         tmake_file="${tmake_file} vax/t-linux"
2501         ;;
2502 vax-*-netbsdelf*)
2503         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2504         ;;
2505 vax-*-netbsd*)
2506         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2507         tmake_file=t-netbsd
2508         extra_parts=""
2509         use_collect2=yes
2510         ;;
2511 vax-*-openbsd*)
2512         tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2513         use_collect2=yes
2514         ;;
2515 xstormy16-*-elf)
2516         # For historical reasons, the target files omit the 'x'.
2517         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
2518         tm_p_file=stormy16/stormy16-protos.h
2519         md_file=stormy16/stormy16.md
2520         out_file=stormy16/stormy16.c
2521         extra_options=stormy16/stormy16.opt
2522         tmake_file="stormy16/t-stormy16"
2523         extra_parts="crtbegin.o crtend.o"
2524         ;;
2525 xtensa*-*-elf*)
2526         tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
2527         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2528         ;;
2529 xtensa*-*-linux*)
2530         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
2531         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2532         ;;
2533 am33_2.0-*-linux*)
2534         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
2535         tmake_file="${tmake_file} mn10300/t-linux"
2536         gas=yes gnu_ld=yes
2537         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2538         use_collect2=no
2539         ;;
2540 m32c-*-rtems*)
2541         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2542         tmake_file="${tmake_file} t-rtems"
2543         c_target_objs="m32c-pragma.o"
2544         cxx_target_objs="m32c-pragma.o"
2545         ;;
2546 m32c-*-elf*)
2547         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2548         c_target_objs="m32c-pragma.o"
2549         cxx_target_objs="m32c-pragma.o"
2550         ;;
2551 *)
2552         echo "*** Configuration ${target} not supported" 1>&2
2553         exit 1
2554         ;;
2555 esac
2556
2557 case ${target} in
2558 i[34567]86-*-linux* | x86_64-*-linux*)
2559         tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2560         ;;
2561 i[34567]86-*-* | x86_64-*-*)
2562         tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2563         ;;
2564 powerpc*-*-* | rs6000-*-*)
2565         tm_file="${tm_file} rs6000/option-defaults.h"
2566 esac
2567
2568 # Support for --with-cpu and related options (and a few unrelated options,
2569 # too).
2570 case ${with_cpu} in
2571   yes | no)
2572     echo "--with-cpu must be passed a value" 1>&2
2573     exit 1
2574     ;;
2575 esac
2576
2577 # Set arch and cpu from ${target} and ${target_noncanonical}.  Set cpu
2578 # to generic if there is no processor scheduler model for the target.
2579 arch=
2580 cpu=
2581 arch_without_sse2=no
2582 arch_without_64bit=no
2583 case ${target} in
2584   i386-*-*)
2585     arch=i386
2586     cpu=i386
2587     arch_without_sse2=yes
2588     arch_without_64bit=yes
2589     ;;
2590   i486-*-*)
2591     arch=i486
2592     cpu=i486
2593     arch_without_sse2=yes
2594     arch_without_64bit=yes
2595     ;;
2596   i586-*-*)
2597     arch_without_sse2=yes
2598     arch_without_64bit=yes
2599     case ${target_noncanonical} in
2600       k6_2-*)
2601         arch=k6-2
2602         cpu=k6-2
2603         ;;
2604       k6_3-*)
2605         arch=k6-3
2606         cpu=k6-3
2607         ;;
2608       k6-*)
2609         arch=k6
2610         cpu=k6
2611         ;;
2612       pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2613         arch=pentium-mmx
2614         cpu=pentium-mmx
2615         ;;
2616       *)
2617         arch=pentium
2618         cpu=pentium
2619         ;;
2620     esac
2621     ;;
2622   i686-*-* | i786-*-*)
2623     case ${target_noncanonical} in
2624       amdfam10-*|barcelona-*)
2625         arch=amdfam10
2626         cpu=amdfam10
2627         ;;
2628       k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2629         arch=k8-sse3
2630         cpu=k8-sse3
2631         ;;
2632       k8-*|opteron-*|athlon64-*|athlon_fx-*)
2633         arch=k8
2634         cpu=k8
2635         ;;
2636       athlon_xp-*|athlon_mp-*|athlon_4-*)
2637         arch=athlon-4
2638         cpu=athlon-4
2639         arch_without_sse2=yes
2640         arch_without_64bit=yes
2641         ;;
2642       athlon_tbird-*|athlon-*)
2643         arch=athlon
2644         cpu=athlon
2645         arch_without_sse2=yes
2646         ;;
2647       geode-*)
2648         arch=geode
2649         cpu=geode
2650         arch_without_sse2=yes
2651         ;;
2652       pentium2-*)
2653         arch=pentium2
2654         cpu=pentium2
2655         arch_without_sse2=yes
2656         ;;
2657       pentium3-*|pentium3m-*)
2658         arch=pentium3
2659         cpu=pentium3
2660         arch_without_sse2=yes
2661         ;;
2662       pentium4-*|pentium4m-*)
2663         arch=pentium4
2664         cpu=pentium4
2665         ;;
2666       prescott-*)
2667         arch=prescott
2668         cpu=prescott
2669         ;;
2670       nocona-*)
2671         arch=nocona
2672         cpu=nocona
2673         ;;
2674       atom-*)
2675         arch=atom
2676         cpu=atom
2677         ;;
2678       core2-*)
2679         arch=core2
2680         cpu=core2
2681         ;;
2682       pentium_m-*)
2683         arch=pentium-m
2684         cpu=pentium-m
2685         ;;
2686       pentiumpro-*)
2687         arch=pentiumpro
2688         cpu=pentiumpro
2689         arch_without_sse2=yes
2690         ;;
2691       *)
2692         arch=pentiumpro
2693         cpu=generic
2694         arch_without_sse2=yes
2695         arch_without_64bit=yes
2696         ;;
2697     esac
2698     ;;
2699   x86_64-*-*)
2700     case ${target_noncanonical} in
2701       amdfam10-*|barcelona-*)
2702         arch=amdfam10
2703         cpu=amdfam10
2704         ;;
2705       k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2706         arch=k8-sse3
2707         cpu=k8-sse3
2708         ;;
2709       k8-*|opteron-*|athlon_64-*)
2710         arch=k8
2711         cpu=k8
2712         ;;
2713       nocona-*)
2714         arch=nocona
2715         cpu=nocona
2716         ;;
2717       atom-*)
2718         arch=atom
2719         cpu=atom
2720         ;;
2721       core2-*)
2722         arch=core2
2723         cpu=core2
2724         ;;
2725       *)
2726         arch=x86-64
2727         cpu=generic
2728         ;;
2729     esac
2730     ;;
2731 esac
2732
2733 # If there is no $with_cpu option, try to infer one from ${target}.
2734 # This block sets nothing except for with_cpu.
2735 if test x$with_cpu = x ; then
2736   case ${target} in
2737     i[34567]86-*-*|x86_64-*-*)
2738       with_cpu=$cpu
2739       ;;
2740     alphaev6[78]*-*-*)
2741       with_cpu=ev67
2742       ;;
2743     alphaev6*-*-*)
2744       with_cpu=ev6
2745       ;;
2746     alphapca56*-*-*)
2747       with_cpu=pca56
2748       ;;
2749     alphaev56*-*-*)
2750       with_cpu=ev56
2751       ;;
2752     alphaev5*-*-*)
2753       with_cpu=ev5
2754       ;;
2755     frv-*-*linux* | frv400-*-*linux*)
2756       with_cpu=fr400
2757       ;;
2758     frv550-*-*linux*)
2759       with_cpu=fr550
2760       ;;
2761     m68k*-*-*)
2762       case "$with_arch" in
2763         "cf")
2764           with_cpu=${default_cf_cpu}
2765           ;;
2766         "" | "m68k")
2767           with_cpu=m${default_m68k_cpu}
2768           ;;
2769       esac
2770       ;;
2771     mips*-*-vxworks)
2772       with_arch=mips2
2773       ;;
2774     sparc*-*-*)
2775       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2776       ;;
2777   esac
2778
2779   # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2780   case ${target} in
2781     i[34567]86-*-*|x86_64-*-*)
2782       if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2783         if test x$with_cpu_32 = x; then
2784           with_cpu_32=$with_cpu
2785         fi
2786         if test x$with_cpu_64 = x; then
2787           with_cpu_64=$with_cpu
2788         fi
2789         with_cpu=
2790       fi
2791       ;;
2792   esac
2793 fi
2794
2795 # Support for --with-arch and related options (and a few unrelated options,
2796 # too).
2797 case ${with_arch} in
2798   yes | no)
2799     echo "--with-arch must be passed a value" 1>&2
2800     exit 1
2801     ;;
2802 esac
2803
2804 # If there is no $with_arch option, try to infer one from ${target}.
2805 # This block sets nothing except for with_arch.
2806 if test x$with_arch = x ; then
2807   case ${target} in
2808     i[34567]86-*-darwin*|x86_64-*-darwin*)
2809       # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2810       # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2811       ;;
2812     i[34567]86-*-*)
2813       # --with-fpmath sets the default ISA to SSE2, which is the same
2814       # ISA supported by Pentium 4.
2815       if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2816         with_arch=$arch
2817       else
2818         with_arch=pentium4
2819       fi
2820       ;;
2821     x86_64-*-*)
2822       with_arch=$arch
2823       ;;
2824   esac
2825
2826   # Avoid overriding --with-arch-32 and --with-arch-64 values.
2827   case ${target} in
2828     i[34567]86-*-darwin*|x86_64-*-darwin*)
2829       # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2830       # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2831       ;;
2832     i[34567]86-*-*|x86_64-*-*)
2833       if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2834         if test x$with_arch_32 = x; then
2835           with_arch_32=$with_arch
2836         fi
2837         if test x$with_arch_64 = x; then
2838           if test $arch_without_64bit = yes; then
2839             # Set the default 64bit arch to x86-64 if the default arch
2840             # doesn't support 64bit.
2841             with_arch_64=x86-64
2842           else
2843             with_arch_64=$with_arch
2844           fi
2845         fi
2846         with_arch=
2847       elif test $arch_without_64bit$need_64bit_isa = yesyes; then
2848         # Set the default 64bit arch to x86-64 if the default arch
2849         # doesn't support 64bit and we need 64bit ISA.
2850         with_arch_32=$with_arch
2851         with_arch_64=x86-64
2852         with_arch=
2853       fi
2854       ;;
2855   esac
2856 fi
2857
2858 # Support --with-fpmath.
2859 if test x$with_fpmath != x; then
2860   case ${target} in
2861     i[34567]86-*-* | x86_64-*-*)
2862       case ${with_fpmath} in
2863       sse)
2864         tm_file="${tm_file} i386/ssemath.h"
2865         ;;
2866       *)
2867         echo "Invalid --with-fpmath=$with_fpmath" 1>&2
2868         exit 1
2869         ;;
2870       esac
2871       ;;
2872     *)
2873       echo "--with-fpmath isn't supported for $target." 1>&2
2874       exit 1
2875       ;;
2876   esac
2877 fi
2878
2879 # Similarly for --with-schedule.
2880 if test x$with_schedule = x; then
2881         case ${target} in
2882         hppa1*)
2883                 # Override default PA8000 scheduling model.
2884                 with_schedule=7100LC
2885                 ;;
2886         esac
2887 fi
2888
2889 # Validate and mark as valid any --with options supported
2890 # by this target.  In order to use a particular --with option
2891 # you must list it in supported_defaults; validating the value
2892 # is optional.  This case statement should set nothing besides
2893 # supported_defaults.
2894
2895 supported_defaults=
2896 case "${target}" in
2897         alpha*-*-*)
2898                 supported_defaults="cpu tune"
2899                 for which in cpu tune; do
2900                         eval "val=\$with_$which"
2901                         case "$val" in
2902                         "" \
2903                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2904                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2905                         | 21264a)
2906                                 ;;
2907                         *)
2908                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2909                                 exit 1
2910                                 ;;
2911                         esac
2912                 done
2913                 ;;
2914
2915         arm*-*-*)
2916                 supported_defaults="arch cpu float tune fpu abi mode"
2917                 for which in cpu tune; do
2918                         # See if it matches any of the entries in arm-cores.def
2919                         eval "val=\$with_$which"
2920                         if [ x"$val" = x ] \
2921                             || grep "^ARM_CORE(\"$val\"," \
2922                                     ${srcdir}/config/arm/arm-cores.def \
2923                                     > /dev/null; then
2924                           # Ok
2925                           new_val=`grep "^ARM_CORE(\"$val\"," \
2926                                 ${srcdir}/config/arm/arm-cores.def | \
2927                                 sed -e 's/^[^,]*,[      ]*//' | \
2928                                 sed -e 's/,.*$//'`
2929                           eval "target_${which}_cname=$new_val"
2930                         echo "For $val real value is $new_val"
2931                           true
2932                         else
2933                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2934                           exit 1
2935                         fi
2936                 done
2937
2938                 case "$with_arch" in
2939                 "" \
2940                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2941                 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
2942                 | armv7 | armv7-a | armv7-r | armv7-m \
2943                 | iwmmxt | ep9312)
2944                         # OK
2945                         ;;
2946                 *)
2947                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2948                         exit 1
2949                         ;;
2950                 esac
2951
2952                 case "$with_float" in
2953                 "" \
2954                 | soft | hard | softfp)
2955                         # OK
2956                         ;;
2957                 *)
2958                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2959                         exit 1
2960                         ;;
2961                 esac
2962
2963                 case "$with_fpu" in
2964                 "" \
2965                 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
2966                 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
2967                 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
2968                 | fpv4-sp-d16 | neon-vfpv4)
2969                         # OK
2970                         ;;
2971                 *)
2972                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2973                         exit 1
2974                         ;;
2975                 esac
2976
2977                 case "$with_abi" in
2978                 "" \
2979                 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
2980                         #OK
2981                         ;;
2982                 *)
2983                         echo "Unknown ABI used in --with-abi=$with_abi"
2984                         exit 1
2985                         ;;
2986                 esac
2987
2988                 case "$with_mode" in
2989                 "" \
2990                 | arm | thumb )
2991                         #OK
2992                         ;;
2993                 *)
2994                         echo "Unknown mode used in --with-mode=$with_mode"
2995                         exit 1
2996                         ;;
2997                 esac
2998
2999                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3000                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3001                 fi
3002                 ;;
3003
3004         fr*-*-*linux*)
3005                 supported_defaults=cpu
3006                 case "$with_cpu" in
3007                 fr400) ;;
3008                 fr550) ;;
3009                 *)
3010                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3011                         exit 1
3012                         ;;
3013                 esac
3014                 ;;
3015
3016         fido-*-* | m68k*-*-*)
3017                 supported_defaults="arch cpu"
3018                 case "$with_arch" in
3019                 "" | "m68k"| "cf")
3020                         m68k_arch_family="$with_arch"
3021                         ;;
3022                 *)
3023                         echo "Invalid --with-arch=$with_arch" 1>&2
3024                         exit 1
3025                         ;;
3026                 esac
3027
3028                 # We always have a $with_cpu setting here.
3029                 case "$with_cpu" in
3030                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3031                         m68k_cpu_ident=$with_cpu
3032                         ;;
3033                 "m68020-40")
3034                         m68k_cpu_ident=m68020
3035                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3036                         ;;
3037                 "m68020-60")
3038                         m68k_cpu_ident=m68020
3039                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3040                         ;;
3041                 *)
3042                         # We need the C identifier rather than the string.
3043                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3044                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3045                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3046                                  ${srcdir}/config/m68k/m68k-devices.def`
3047                         if [ x"$m68k_cpu_ident" = x ] ; then
3048                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3049                                 exit 1
3050                         fi
3051                         with_cpu="mcpu=$with_cpu"
3052                         ;;
3053                 esac
3054                 ;;
3055
3056         hppa*-*-*)
3057                 supported_defaults="arch schedule"
3058
3059                 case "$with_arch" in
3060                 "" | 1.0 | 1.1 | 2.0)
3061                         # OK
3062                         ;;
3063                 *)
3064                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3065                         exit 1
3066                         ;;
3067                 esac
3068
3069                 case "$with_schedule" in
3070                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3071                         # OK
3072                         ;;
3073                 *)
3074                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3075                         exit 1
3076                         ;;
3077                 esac
3078                 ;;
3079
3080         i[34567]86-*-* | x86_64-*-*)
3081                 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3082                 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3083                         eval "val=\$with_$which"
3084                         case ${val} in
3085                         i386 | i486 \
3086                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3087                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3088                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3089                         | athlon-4 | athlon-xp | athlon-mp | geode \
3090                         | prescott | pentium-m | pentium4m | pentium3m)
3091                                 case "${target}" in
3092                                   x86_64-*-*)
3093                                       case "x$which" in
3094                                         *_32)
3095                                                 ;;
3096                                         *)
3097                                                 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3098                                                 exit 1
3099                                                 ;;
3100                                       esac
3101                                       ;;
3102                                 esac
3103                                 # OK
3104                                 ;;
3105                         "" | x86-64 | generic | native \
3106                         | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3107                         | opteron-sse3 | athlon-fx | amdfam10 | barcelona \
3108                         | nocona | core2 | atom)
3109                                 # OK
3110                                 ;;
3111                         *)
3112                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
3113                                 exit 1
3114                                 ;;
3115                         esac
3116                 done
3117                 ;;
3118
3119         mips*-*-*)
3120                 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3121
3122                 case ${with_float} in
3123                 "" | soft | hard)
3124                         # OK
3125                         ;;
3126                 *)
3127                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3128                         exit 1
3129                         ;;
3130                 esac
3131
3132                 case ${with_abi} in
3133                 "" | 32 | o64 | n32 | 64 | eabi)
3134                         # OK
3135                         ;;
3136                 *)
3137                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3138                         exit 1
3139                         ;;
3140                 esac
3141
3142                 case ${with_divide} in
3143                 "" | breaks | traps)
3144                         # OK
3145                         ;;
3146                 *)
3147                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3148                         exit 1
3149                         ;;
3150                 esac
3151
3152                 case ${with_llsc} in
3153                 yes)
3154                         with_llsc=llsc
3155                         ;;
3156                 no)
3157                         with_llsc="no-llsc"
3158                         ;;
3159                 "")
3160                         # OK
3161                         ;;
3162                 *)
3163                         echo "Unknown llsc type used in --with-llsc" 1>&2
3164                         exit 1
3165                         ;;
3166                 esac
3167
3168                 case ${with_mips_plt} in
3169                 yes)
3170                         with_mips_plt=plt
3171                         ;;
3172                 no)
3173                         with_mips_plt=no-plt
3174                         ;;
3175                 "")
3176                         ;;
3177                 *)
3178                         echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3179                         exit 1
3180                         ;;
3181                 esac
3182
3183                 case ${with_synci} in
3184                 yes)
3185                         with_synci=synci
3186                         ;;
3187                 "" | no)
3188                         # No is the default.
3189                         with_synci=no-synci
3190                         ;;
3191                 *)
3192                         echo "Unknown synci type used in --with-synci" 1>&2
3193                         exit 1
3194                         ;;
3195                 esac
3196                 ;;
3197
3198         powerpc*-*-* | rs6000-*-*)
3199                 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3200
3201                 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3202                         eval "val=\$with_$which"
3203                         case ${val} in
3204                         default32 | default64)
3205                                 case $which in
3206                                 cpu | tune)
3207                                         ;;
3208                                 *)
3209                                         echo "$val only valid for --with-cpu and --with-tune." 1>&2
3210                                         exit 1
3211                                         ;;
3212                                 esac
3213                                 with_which="with_$which"
3214                                 eval $with_which=
3215                                 ;;
3216                         405cr)
3217                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
3218                                 eval "with_$which=405"
3219                                 ;;
3220                         "" | common \
3221                         | power | power[234567] | power6x | powerpc | powerpc64 \
3222                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3223                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3224                         | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3225                         | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3226                         | a2 | e300c[23] | 854[08] | e500mc | e500mc64 \
3227                         | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3228                                 # OK
3229                                 ;;
3230                         *)
3231                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3232                                 exit 1
3233                                 ;;
3234                         esac
3235                 done
3236                 ;;
3237
3238         s390*-*-*)
3239                 supported_defaults="arch mode tune"
3240
3241                 for which in arch tune; do
3242                         eval "val=\$with_$which"
3243                         case ${val} in
3244                         "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
3245                                 # OK
3246                                 ;;
3247                         *)
3248                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3249                                 exit 1
3250                                 ;;
3251                         esac
3252                 done
3253
3254                 case ${with_mode} in
3255                 "" | esa | zarch)
3256                         # OK
3257                         ;;
3258                 *)
3259                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3260                         exit 1
3261                         ;;
3262                 esac
3263                 ;;
3264
3265         sh[123456ble]-*-* | sh-*-*)
3266                 supported_defaults="cpu"
3267                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3268                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3269                         # OK
3270                         ;;
3271                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3272                         ;;
3273                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3274                         ;;
3275                 *)
3276                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
3277                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3278                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3279                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3280                         exit 1
3281                         ;;
3282                 esac
3283                 ;;
3284         sparc*-*-*)
3285                 supported_defaults="cpu float tune"
3286
3287                 for which in cpu tune; do
3288                         eval "val=\$with_$which"
3289                         case ${val} in
3290                         "" | sparc | sparcv9 | sparc64 | sparc86x \
3291                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
3292                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3293                         | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3294                                 # OK
3295                                 ;;
3296                         *)
3297                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3298                                 exit 1
3299                                 ;;
3300                         esac
3301                 done
3302
3303                 case ${with_float} in
3304                 "" | soft | hard)
3305                         # OK
3306                         ;;
3307                 *)
3308                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3309                         exit 1
3310                         ;;
3311                 esac
3312                 ;;
3313
3314         spu-*-*)
3315                 supported_defaults="arch tune"
3316
3317                 for which in arch tune; do
3318                         eval "val=\$with_$which"
3319                         case ${val} in
3320                         "" | cell | celledp)
3321                                 # OK
3322                                 ;;
3323                         *)
3324                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3325                                 exit 1
3326                                 ;;
3327                         esac
3328                 done
3329                 ;;
3330
3331         v850*-*-*)
3332                 supported_defaults=cpu
3333                 case ${with_cpu} in
3334                 "" | v850e | v850e1)
3335                         # OK
3336                         ;;
3337                 *)
3338                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3339                         exit 1
3340                         ;;
3341                 esac
3342                 ;;
3343 esac
3344
3345 # Set some miscellaneous flags for particular targets.
3346 target_cpu_default2=
3347 case ${target} in
3348         alpha*-*-*)
3349                 if test x$gas = xyes
3350                 then
3351                         target_cpu_default2="MASK_GAS"
3352                 fi
3353                 ;;
3354
3355         arm*-*-*)
3356                 if test x$target_cpu_cname = x
3357                 then
3358                         target_cpu_default2=TARGET_CPU_generic
3359                 else
3360                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3361                 fi
3362                 ;;
3363
3364         hppa*-*-*)
3365                 target_cpu_default2="MASK_BIG_SWITCH"
3366                 if test x$gas = xyes
3367                 then
3368                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3369                 fi
3370                 ;;
3371
3372         fido*-*-* | m68k*-*-*)
3373                 target_cpu_default2=$m68k_cpu_ident
3374                 if [ x"$m68k_arch_family" != x ]; then
3375                         tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3376                 fi
3377                 ;;
3378
3379         i[34567]86-*-darwin* | x86_64-*-darwin*)
3380                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3381                 ;;
3382         i[34567]86-*-linux* | x86_64-*-linux* | \
3383           i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3384           i[34567]86-*-gnu*)
3385                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3386                 ;;
3387         i[34567]86-*-solaris2*)
3388                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3389                 ;;
3390         i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3391                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3392                 ;;
3393         ia64*-*-linux*)
3394                 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3395                 ;;
3396
3397         mips*-*-*)
3398                 if test x$gnu_ld = xyes
3399                 then
3400                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3401                 fi
3402                 case ${target} in
3403                         mips*el-*-*)
3404                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3405                                 ;;
3406                 esac
3407                 if test "x$enable_gofast" = xyes
3408                 then
3409                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3410                         tmake_file="mips/t-gofast $tmake_file"
3411                 else
3412                         tmake_file="mips/t-mips $tmake_file"
3413                 fi
3414                 ;;
3415
3416         powerpc*-*-* | rs6000-*-*)
3417                 # FIXME: The PowerPC port uses the value set at compile time,
3418                 # although it's only cosmetic.
3419                 if test "x$with_cpu" != x
3420                 then
3421                         target_cpu_default2="\\\"$with_cpu\\\""
3422                 fi
3423                 out_file=rs6000/rs6000.c
3424                 c_target_objs="${c_target_objs} rs6000-c.o"
3425                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3426                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3427
3428                 if test x$enable_e500_double = xyes
3429                 then
3430                         tm_file="$tm_file rs6000/e500-double.h"
3431                 fi
3432                 ;;
3433
3434         sh[123456ble]*-*-* | sh-*-*)
3435                 c_target_objs="${c_target_objs} sh-c.o"
3436                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3437                 ;;
3438
3439         sparc*-*-*)
3440                 # Some standard aliases.
3441                 case x$with_cpu in
3442                 xsparc)
3443                         with_cpu=v7
3444                         ;;
3445                 xsparcv9 | xsparc64)
3446                         with_cpu=v9
3447                         ;;
3448                 esac
3449
3450                 # The SPARC port checks this value at compile-time.
3451                 target_cpu_default2="TARGET_CPU_$with_cpu"
3452                 ;;
3453         v850*-*-*)
3454                 # FIXME: The v850 is "special" in that it does not support
3455                 # runtime CPU selection, only --with-cpu.
3456                 case "x$with_cpu" in
3457                 x)
3458                         ;;
3459                 xv850e)
3460                         target_cpu_default2="TARGET_CPU_$with_cpu"
3461                         ;;
3462                 esac
3463                 ;;
3464 esac
3465
3466 t=
3467 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3468 for option in $all_defaults
3469 do
3470         eval "val=\$with_"`echo $option | sed s/-/_/g`
3471         if test -n "$val"; then
3472                 case " $supported_defaults " in
3473                 *" $option "*)
3474                         ;;
3475                 *)
3476                         echo "This target does not support --with-$option." 2>&1
3477                         echo "Valid --with options are: $supported_defaults" 2>&1
3478                         exit 1
3479                         ;;
3480                 esac
3481
3482                 if test "x$t" = x
3483                 then
3484                         t="{ \"$option\", \"$val\" }"
3485                 else
3486                         t="${t}, { \"$option\", \"$val\" }"
3487                 fi
3488         fi
3489 done
3490
3491 if test "x$t" = x
3492 then
3493         configure_default_options="{ { NULL, NULL} }"
3494 else
3495         configure_default_options="{ ${t} }"
3496 fi
3497
3498 if test "$target_cpu_default2" != ""
3499 then
3500         if test "$target_cpu_default" != ""
3501         then
3502                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3503         else
3504                 target_cpu_default=$target_cpu_default2
3505         fi
3506 fi