1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # out_file The name of the machine description C support
91 # file, if different from "$cpu_type/$cpu_type.c".
93 # md_file The name of the machine-description file, if
94 # different from "$cpu_type/$cpu_type.md".
96 # tmake_file A list of machine-description-specific
97 # makefile-fragments, if different from
98 # "$cpu_type/t-$cpu_type".
100 # extra_modes The name of the file containing a list of extra
101 # machine modes, if necessary and different from
102 # "$cpu_type/$cpu_type-modes.def".
104 # extra_objs List of extra objects that should be linked into
105 # the compiler proper (cc1, cc1obj, cc1plus)
106 # depending on target.
108 # extra_gcc_objs List of extra objects that should be linked into
109 # the compiler driver (gcc) depending on target.
111 # extra_headers List of used header files from the directory
112 # config/${cpu_type}.
114 # user_headers_inc_next_pre
115 # List of header file names of internal gcc header
116 # files, which should be prefixed by an include_next.
117 # user_headers_inc_next_post
118 # List of header file names of internal gcc header
119 # files, which should be postfixed by an include_next.
120 # use_gcc_tgmath If set, add tgmath.h to the list of used header
123 # use_gcc_stdint If "wrap", install a version of stdint.h that
124 # wraps the system's copy for hosted compilations;
125 # if "provide", provide a version of systems without
126 # such a system header; otherwise "none", do not
127 # provide such a header at all.
129 # extra_passes List of extra executables compiled for this target
130 # machine, used for compiling from source to object.
132 # extra_parts List of extra object files that should be compiled
133 # for this target machine.
135 # extra_programs Like extra_passes, but these are used when linking.
137 # extra_options List of target-dependent .opt files.
139 # c_target_objs List of extra target-dependent objects that be
140 # linked into the C compiler only.
142 # cxx_target_objs List of extra target-dependent objects that be
143 # linked into the C++ compiler only.
145 # fortran_target_objs List of extra target-dependent objects that be
146 # linked into the fortran compiler only.
148 # target_gtfiles List of extra source files with type information.
150 # xm_defines List of macros to define when compiling for the
153 # xm_file List of files to include when compiling for the
156 # use_collect2 Set to yes or no, depending on whether collect2
159 # target_cpu_default Set to override the default target model.
161 # gdb_needs_out_file_path
162 # Set to yes if gdb needs a dir command with
163 # `dirname $out_file`.
165 # thread_file Set to control which thread package to use.
167 # gas Set to yes or no depending on whether the target
168 # system normally uses GNU as.
170 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
171 # for this target. This is true if this target
172 # supports "long" or "wchar_t" wider than 32 bits,
173 # or BITS_PER_WORD is wider than 32 bits.
174 # The setting made here must match the one made in
175 # other locations such as libcpp/configure.ac
177 # configure_default_options
178 # Set to an initializer for configure_default_options
179 # in configargs.h, based on --with-cpu et cetera.
181 # The following variables are used in each case-construct to build up the
182 # outgoing variables:
184 # gnu_ld Set to yes or no depending on whether the target
185 # system normally uses GNU ld.
190 user_headers_inc_next_pre=
191 user_headers_inc_next_post=
205 # Set this to force installation and use of collect2.
207 # Set this to override the default target model.
209 # Set this if gdb needs a dir command with `dirname $out_file`
210 gdb_needs_out_file_path=
211 # Set this to control which thread package will be used.
213 # Reinitialize these from the flag values every loop pass, since some
214 # configure entries modify them.
216 gnu_ld="$gnu_ld_flag"
217 default_use_cxa_atexit=no
218 default_gnu_indirect_function=no
223 # Don't carry these over build->host->target. Please.
227 # Obsolete configurations.
230 # if test "x$enable_obsolete" != xyes; then
231 # echo "*** Configuration ${target} is obsolete." >&2
232 # echo "*** Specify --enable-obsolete to build it anyway." >&2
233 # echo "*** Support will be REMOVED in the next major release of GCC," >&2
234 # echo "*** unless a maintainer comes forward." >&2
239 # Unsupported targets list. Do not put an entry in this list unless
240 # it would otherwise be caught by a more permissive pattern. The list
241 # should be in alphabetical order.
244 | i[34567]86-*-go32* \
245 | mips64orion*-*-rtems* \
247 | sparc-hal-solaris2* \
255 | *-*-solaris2.[0-7] \
256 | *-*-solaris2.[0-7].* \
260 echo "*** Configuration ${target} not supported" 1>&2
265 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
266 # updated in each machine entry. Also set default extra_headers for some
269 cpu_type=`echo ${target} | sed 's/-.*$//'`
274 tmake_file=m32c/t-m32c
279 extra_options="${extra_options} g.opt"
286 extra_headers="mmintrin.h arm_neon.h"
287 c_target_objs="arm-c.o"
288 cxx_target_objs="arm-c.o"
292 c_target_objs="avr-c.o"
293 cxx_target_objs="avr-c.o"
302 extra_options="${extra_options} g.opt"
304 moxie*) cpu_type=moxie
308 extra_headers=math-68881.h
312 c_target_objs="i386-c.o"
313 cxx_target_objs="i386-c.o"
314 extra_options="${extra_options} fused-madd.opt"
315 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
316 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
317 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
318 immintrin.h x86intrin.h avxintrin.h xopintrin.h
319 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
320 abmintrin.h bmiintrin.h tbmintrin.h"
324 c_target_objs="i386-c.o"
325 cxx_target_objs="i386-c.o"
326 extra_options="${extra_options} fused-madd.opt"
327 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
328 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
329 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
330 immintrin.h x86intrin.h avxintrin.h xopintrin.h
331 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
332 abmintrin.h bmiintrin.h tbmintrin.h"
336 extra_headers=ia64intrin.h
338 extra_options="${extra_options} g.opt fused-madd.opt"
344 extra_options="${extra_options} g.opt"
348 extra_options="${extra_options} g.opt"
351 extra_headers=math-68881.h
355 extra_options="${extra_options} g.opt"
360 extra_headers="loongson.h"
361 extra_options="${extra_options} g.opt"
368 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
371 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
375 extra_options="${extra_options} g.opt fused-madd.opt"
379 extra_options="${extra_options} g.opt fused-madd.opt"
383 extra_options="${extra_options} g.opt"
396 extra_options="${extra_options} fused-madd.opt"
398 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
399 sh[123456789lbe]*-*-* | sh-*-*)
404 extra_options="${extra_options} fused-madd.opt"
408 tm_file=${cpu_type}/${cpu_type}.h
409 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
411 tm_p_file=${cpu_type}/${cpu_type}-protos.h
414 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
416 extra_modes=${cpu_type}/${cpu_type}-modes.def
418 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
420 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
425 if test "x$enable_cld" = xyes; then
426 tm_defines="${tm_defines} USE_IX86_CLD=1"
428 if test "x$enable_frame_pointer" = xyes; then
429 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
431 tm_file="vxworks-dummy.h ${tm_file}"
434 tm_file="i386/biarch64.h ${tm_file}"
435 if test "x$enable_cld" = xyes; then
436 tm_defines="${tm_defines} USE_IX86_CLD=1"
438 if test "x$enable_frame_pointer" = xyes; then
439 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
441 tm_file="vxworks-dummy.h ${tm_file}"
445 # On a.out targets, we need to use collect2.
452 # Common C libraries.
453 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
455 # Common parts for widely ported systems.
458 tmake_file="t-darwin ${cpu_type}/t-darwin"
459 tm_file="${tm_file} darwin.h"
462 tm_file="${tm_file} darwin9.h"
464 *-*-darwin[12][0-9]*)
465 tm_file="${tm_file} darwin9.h darwin10.h"
468 tm_file="${tm_file} ${cpu_type}/darwin.h"
469 tm_p_file="${tm_p_file} darwin-protos.h"
470 target_gtfiles="\$(srcdir)/config/darwin.c"
471 extra_options="${extra_options} darwin.opt"
472 c_target_objs="${c_target_objs} darwin-c.o"
473 cxx_target_objs="${cxx_target_objs} darwin-c.o"
474 fortran_target_objs="darwin-f.o"
475 extra_objs="darwin.o"
476 extra_gcc_objs="darwin-driver.o"
477 default_use_cxa_atexit=yes
479 case ${enable_threads} in
480 "" | yes | posix) thread_file='posix' ;;
483 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
484 # This is the place-holder for the generic a.out configuration
485 # of FreeBSD. No actual configuration resides here since
486 # there was only ever a bare-bones ix86 configuration for
487 # a.out and it exists solely in the machine-specific section.
488 # This place-holder must exist to avoid dropping into
489 # the generic ELF configuration of FreeBSD (i.e. it must be
490 # ordered before that section).
493 # This is the generic ELF configuration of FreeBSD. Later
494 # machine-specific sections may refine and add to this
497 # Due to tm_file entry ordering issues that vary between cpu
498 # architectures, we only define fbsd_tm_file to allow the
499 # machine-specific section to dictate the final order of all
500 # entries of tm_file with the minor exception that components
501 # of the tm_file set here will always be of the form:
503 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
505 # The machine-specific section should not tamper with this
506 # ordering but may order all other entries of tm_file as it
507 # pleases around the provided core setting.
510 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
511 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
512 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
513 tmake_file="t-slibgcc-elf-ver t-freebsd"
514 case ${enable_threads} in
516 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
520 tmake_file="${tmake_file} t-freebsd-thread"
521 # Before 5.0, FreeBSD can't bind shared libraries to -lc
522 # when "optionally" threaded via weak pthread_* checks.
524 *-*-freebsd[34] | *-*-freebsd[34].*)
525 tmake_file="${tmake_file} t-slibgcc-nolc-override"
530 echo 'Unknown thread configuration for FreeBSD'
534 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
535 extra_options="$extra_options rpath.opt freebsd.opt"
540 default_use_cxa_atexit=yes;;
542 # need_64bit_hwint=yes # system compiler has this for all arch!
545 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
546 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
549 case ${enable_threads} in
550 "" | yes | posix) thread_file='posix' ;;
552 tmake_file="t-slibgcc-elf-ver t-linux"
554 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
557 tmake_file="$tmake_file t-gnu";;
559 # glibc / uclibc / bionic switch.
560 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
563 extra_options="$extra_options linux.opt";;
565 tm_defines="$tm_defines SINGLE_LIBC";;
569 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
572 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
575 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
578 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
580 default_use_cxa_atexit=yes
583 # Add Android userspace support to Linux targets.
586 tm_file="$tm_file linux-android.h"
587 extra_options="$extra_options linux-android.opt"
590 # Enable compilation for Android by default for *android* targets.
593 tm_defines="$tm_defines ANDROID_DEFAULT=1"
596 tm_defines="$tm_defines ANDROID_DEFAULT=0"
601 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
605 # NetBSD 2.0 and later get POSIX threads enabled by default.
606 # Allow them to be explicitly enabled on any other version.
607 case ${enable_threads} in
610 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
612 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
618 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
622 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
623 # ELF configurations. We will clear extra_parts in the
624 # a.out configurations.
626 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
627 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
631 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
632 # default (unless overridden by --disable-__cxa_atexit).
634 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
635 default_use_cxa_atexit=yes
640 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
641 case ${enable_threads} in
644 tmake_file="${tmake_file} t-openbsd-thread"
648 *-*-openbsd2.*|*-*-openbsd3.[012])
649 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
653 case ${enable_threads} in
654 yes) thread_file='rtems' ;;
656 extra_options="${extra_options} rtems.opt"
661 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
664 extra_options="${extra_options} sol2.opt"
669 extra_options="${extra_options} vxworks.opt"
671 case ${enable_threads} in
673 "" | yes | vxworks) thread_file='vxworks' ;;
674 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
678 # Assume that newlib is being used and so __cxa_atexit is provided.
679 default_use_cxa_atexit=yes
685 # Support site-specific machine types.
687 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
688 tm_file=${cpu_type}/$rest.h
689 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
690 then xm_file=${cpu_type}/xm-$rest.h
692 if test -f $srcdir/config/${cpu_type}/t-$rest
693 then tmake_file=${cpu_type}/t-$rest
697 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
698 target_cpu_default="MASK_GAS"
699 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
702 tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
703 target_cpu_default="MASK_GAS"
704 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
707 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
708 target_cpu_default="MASK_GAS"
709 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
710 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
713 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
714 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
715 target_cpu_default="MASK_GAS"
716 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
719 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
720 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
721 extra_options="${extra_options} openbsd.opt"
722 # default x-alpha is only appropriate for dec-osf.
723 target_cpu_default="MASK_GAS"
724 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
727 if test x$stabs = xyes
729 tm_file="${tm_file} dbx.h"
731 if test x$gas != xyes
733 extra_passes="mips-tfile mips-tdump"
736 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
737 tm_file="${tm_file} alpha/osf5.h"
738 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
739 extra_options="${extra_options} rpath.opt"
740 extra_headers=va_list.h
741 use_gcc_stdint=provide
742 case ${enable_threads} in
745 tmake_file="${tmake_file} alpha/t-osf-pthread"
750 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
751 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
752 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
755 install_headers_dir=install-headers-cp
756 extra_options="${extra_options} vms/vms.opt"
759 tm_file="${tm_file} alpha/vms.h"
760 xm_file="alpha/xm-vms.h"
761 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
764 install_headers_dir=install-headers-cp
765 extra_options="${extra_options} vms/vms.opt"
768 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
769 extra_parts="crtinit.o crtfini.o"
772 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
773 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
776 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
777 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
780 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
781 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
782 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
785 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
786 extra_options="${extra_options} netbsd.opt"
787 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
791 arm*-*-linux*) # ARM GNU/Linux with ELF
792 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
795 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
798 tmake_file="${tmake_file} t-linux arm/t-arm"
801 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
802 tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
803 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
804 # Define multilib configuration for arm-linux-androideabi.
807 tmake_file="$tmake_file arm/t-linux-androideabi"
810 # The BPABI long long divmod functions return a 128-bit value in
811 # registers r0-r3. Correctly modeling that requires the use of
814 # The EABI requires the use of __cxa_atexit.
815 default_use_cxa_atexit=yes
818 tmake_file="$tmake_file arm/t-linux"
821 tm_file="$tm_file arm/aout.h arm/arm.h"
822 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
824 arm*-*-uclinux*) # ARM ucLinux
825 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
826 tmake_file="arm/t-arm arm/t-arm-elf"
829 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
830 tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
831 tmake_file="$tmake_file arm/t-bpabi"
832 # The BPABI long long divmod functions return a 128-bit value in
833 # registers r0-r3. Correctly modeling that requires the use of
836 # The EABI requires the use of __cxa_atexit.
837 default_use_cxa_atexit=yes
839 tm_file="$tm_file arm/aout.h arm/arm.h"
840 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
843 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
844 tmake_file="arm/t-arm arm/t-arm-elf"
845 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
847 arm*-*-eabi* | arm*-*-symbianelf* )
848 # The BPABI long long divmod functions return a 128-bit value in
849 # registers r0-r3. Correctly modeling that requires the use of
852 default_use_cxa_atexit=yes
853 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
854 tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
855 tmake_file="arm/t-arm arm/t-arm-elf"
858 tm_file="$tm_file newlib-stdint.h"
859 tmake_file="${tmake_file} arm/t-bpabi"
863 tm_file="${tm_file} arm/symbian.h"
864 # We do not include t-bpabi for Symbian OS because the system
865 # provides its own implementation of the BPABI functions.
866 tmake_file="${tmake_file} arm/t-symbian"
869 tm_file="${tm_file} arm/aout.h arm/arm.h"
870 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
873 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
874 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
875 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
878 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
879 tmake_file="arm/t-arm arm/t-arm-elf"
880 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
883 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
884 tmake_file="arm/t-arm arm/t-wince-pe"
885 extra_options="${extra_options} arm/pe.opt"
889 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
890 tmake_file="arm/t-arm arm/t-pe"
892 extra_options="${extra_options} arm/pe.opt"
896 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
897 tmake_file="avr/t-avr t-rtems avr/t-rtems"
898 extra_gcc_objs="driver-avr.o avr-devices.o"
899 extra_objs="avr-devices.o"
902 tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
904 extra_gcc_objs="driver-avr.o avr-devices.o"
905 extra_objs="avr-devices.o"
908 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
909 tmake_file=bfin/t-bfin-elf
913 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
914 tmake_file=bfin/t-bfin-uclinux
918 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
919 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
920 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
924 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
925 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
928 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
929 tmake_file=bfin/t-bfin
933 crisv32-*-elf | crisv32-*-none)
934 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
935 tmake_file="cris/t-cris"
936 target_cpu_default=32
938 extra_options="${extra_options} cris/elf.opt"
941 cris-*-elf | cris-*-none)
942 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
943 tmake_file="cris/t-cris cris/t-elfmulti"
945 extra_options="${extra_options} cris/elf.opt"
948 crisv32-*-linux* | cris-*-linux*)
949 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
950 # We need to avoid using t-linux, so override default tmake_file
951 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
952 extra_options="${extra_options} cris/linux.opt"
955 target_cpu_default=10
958 target_cpu_default=32
963 tm_file="elfos.h newlib-stdint.h ${tm_file}"
964 extra_parts="crtbegin.o crtend.o"
968 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
969 tmake_file=fr30/t-fr30
970 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
973 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
974 tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
978 tm_file="dbxelf.h elfos.h ${tm_file} \
979 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
980 tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
981 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
986 tm_file="dbxelf.h elfos.h ${tm_file}"
987 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
988 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
993 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
994 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
995 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
998 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp t-rtems"
999 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1002 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
1003 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1006 tmake_file="h8300/t-h8300 h8300/t-elf"
1007 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1010 target_cpu_default="MASK_PA_11|MASK_PA_20"
1011 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1012 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1014 tmake_file="${tmake_file} pa/t-linux64"
1016 need_64bit_hwint=yes
1019 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1020 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1021 pa/pa32-regs.h pa/pa32-linux.h"
1022 tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
1023 # Set the libgcc version number
1024 if test x$sjlj = x1; then
1025 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1027 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1030 # port not yet contributed.
1032 # target_cpu_default="MASK_PA_11"
1034 hppa[12]*-*-hpux10*)
1036 hppa1.1-*-* | hppa2*-*-*)
1037 target_cpu_default="MASK_PA_11"
1040 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1041 pa/pa-hpux.h pa/pa-hpux10.h"
1042 extra_options="${extra_options} pa/pa-hpux.opt"
1045 tm_file="${tm_file} pa/pa-hpux1010.h"
1046 extra_options="${extra_options} pa/pa-hpux1010.opt"
1049 use_gcc_stdint=provide
1050 tm_file="${tm_file} hpux-stdint.h"
1051 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
1052 case ${enable_threads} in
1054 if test x$have_pthread_h = xyes ; then
1055 tmake_file="${tmake_file} pa/t-dce-thr"
1059 tmake_file="${tmake_file} pa/t-dce-thr"
1062 # Set the libgcc version number
1063 if test x$sjlj = x1; then
1064 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1066 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1070 if test "x$with_dwarf2" != x; then
1071 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1076 target_cpu_default="MASK_PA_11|MASK_PA_20"
1077 if test x$gnu_ld = xyes
1079 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1081 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1082 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1086 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1087 extra_options="${extra_options} pa/pa-hpux1111.opt"
1090 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1093 extra_options="${extra_options} pa/pa-hpux.opt \
1094 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1095 need_64bit_hwint=yes
1096 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1097 # Set the libgcc version number
1098 if test x$sjlj = x1; then
1099 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1101 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1103 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1105 case x${enable_threads} in
1113 use_gcc_stdint=provide
1114 tm_file="${tm_file} hpux-stdint.h"
1118 tm_file="${tm_file} hpux-stdint.h"
1122 hppa[12]*-*-hpux11*)
1124 hppa1.1-*-* | hppa2*-*-*)
1125 target_cpu_default="MASK_PA_11"
1128 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1129 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1130 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1133 tm_file="${tm_file} pa/pa-hpux1111.h"
1134 extra_options="${extra_options} pa/pa-hpux1111.opt"
1137 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1138 # Set the libgcc version number
1139 if test x$sjlj = x1; then
1140 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1142 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1144 extra_parts="libgcc_stub.a"
1145 case x${enable_threads} in
1154 use_gcc_stdint=provide
1155 tm_file="${tm_file} hpux-stdint.h"
1159 tm_file="${tm_file} hpux-stdint.h"
1162 if test "x$with_dwarf2" != x; then
1163 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1167 i[34567]86-*-darwin*)
1168 need_64bit_hwint=yes
1170 # Baseline choice for a machine that allows m64 support.
1171 with_cpu=${with_cpu:-core2}
1172 tmake_file="${tmake_file} t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1175 with_cpu=${with_cpu:-core2}
1176 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1177 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1180 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1181 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1184 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1185 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1187 i[34567]86-*-freebsd*)
1188 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1191 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1192 tmake_file="${tmake_file} i386/t-crtstuff"
1194 i[34567]86-*-netbsdelf*)
1195 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1196 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1198 i[34567]86-*-netbsd*)
1199 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1200 extra_options="${extra_options} netbsd.opt"
1201 tmake_file="${tmake_file} t-netbsd"
1206 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1207 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1208 tmake_file="${tmake_file} i386/t-crtstuff"
1210 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1211 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1212 extra_options="${extra_options} openbsd.opt"
1213 # needed to unconfuse gdb
1214 tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1215 # we need collect2 until our bug is fixed...
1218 i[34567]86-*-openbsd*)
1219 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1220 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1221 extra_options="${extra_options} openbsd.opt"
1225 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1226 # Intel 80386's running GNU/*
1227 # with ELF format using glibc 2
1228 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
1230 i[34567]86-*-linux*)
1231 # Assume modern glibc
1232 default_gnu_indirect_function=yes
1233 if test x$enable_targets = xall; then
1234 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1235 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1236 tmake_file="${tmake_file} i386/t-linux64"
1237 need_64bit_hwint=yes
1239 case X"${with_cpu}" in
1240 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1243 if test x$with_cpu_64 = x; then
1248 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1249 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1254 tm_file="${tm_file} i386/linux.h"
1257 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1258 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1259 i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1260 i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1262 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1264 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1265 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h \
1266 i386/x86-64.h i386/linux64.h"
1269 default_gnu_indirect_function=glibc-2011 ;;
1270 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1271 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1273 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1275 i[34567]86-pc-msdosdjgpp*)
1276 xm_file=i386/xm-djgpp.h
1277 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1278 tmake_file="${tmake_file} i386/t-djgpp"
1279 extra_options="${extra_options} i386/djgpp.opt"
1284 i[34567]86-*-lynxos*)
1286 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1287 tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1288 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1289 extra_options="${extra_options} lynx.opt"
1294 i[3456x]86-*-netware*)
1295 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h tm-dwarf2.h i386/netware.h"
1296 tmake_file="${tmake_file} i386/t-netware"
1297 extra_objs=netware.o
1300 extra_objs="$extra_objs nwld.o"
1301 tm_file="${tm_file} i386/nwld.h"
1302 tmake_file="${tmake_file} i386/t-nwld"
1303 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1306 case x${enable_threads} in
1307 x | xyes | xposix) thread_file='posix';;
1308 xnks) thread_file='nks';;
1310 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1313 i[34567]86-*-nto-qnx*)
1314 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
1315 tmake_file="${tmake_file} i386/t-nto"
1319 i[34567]86-*-rtems*)
1320 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1321 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1322 tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1324 i[34567]86-*-solaris2*)
1325 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sysv4.h sol2.h"
1326 # Set default arch_32 to pentium4, tune_32 to generic like the other
1327 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1330 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1332 with_arch_32=${with_arch_32:-pentiumpro}
1335 with_arch_32=${with_arch_32:-pentium4}
1338 with_tune_32=${with_tune_32:-generic}
1340 *-*-solaris2.1[0-9]*)
1341 tm_file="${tm_file} sol2-10.h"
1344 tm_file="${tm_file} i386/sol2.h"
1345 if test x$gnu_ld = xyes; then
1346 tm_file="${tm_file} sol2-gld.h"
1348 if test x$gas = xyes; then
1349 tm_file="${tm_file} i386/sol2-gas.h"
1351 tmake_file="${tmake_file} t-sol2 t-svr4"
1352 c_target_objs="${c_target_objs} sol2-c.o"
1353 cxx_target_objs="${cxx_target_objs} sol2-c.o"
1355 tm_p_file="${tm_p_file} sol2-protos.h"
1356 if test x$gnu_ld = xyes; then
1357 tmake_file="$tmake_file t-slibgcc-elf-ver"
1358 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1360 tmake_file="$tmake_file t-slibgcc-sld"
1362 if test x$gas = xyes; then
1363 tm_file="usegas.h ${tm_file}"
1365 tm_file="$tm_file tm-dwarf2.h"
1367 *-*-solaris2.1[0-9]*)
1368 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1369 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1370 tmake_file="$tmake_file i386/t-sol2-10"
1371 # i386/t-crtstuff only affects libgcc. Its inclusion
1372 # depends on a runtime test and is thus performed in
1373 # libgcc/configure.ac instead.
1374 need_64bit_hwint=yes
1377 case X"${with_cpu}" in
1378 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1381 if test x$with_cpu_64 = x; then
1386 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1387 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1393 use_gcc_stdint=provide
1396 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1397 "":yes:* | yes:yes:* )
1400 "":*:yes | yes:*:yes )
1405 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1406 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
1409 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1410 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1413 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1414 tmake_file="${tmake_file} i386/t-vxworks"
1418 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1419 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1420 xm_file=i386/xm-cygwin.h
1421 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1422 if test x$sjlj = x0; then
1423 tmake_eh_file="i386/t-dw2-eh"
1425 tmake_eh_file="i386/t-sjlj-eh"
1427 # Shared libgcc DLL install dir depends on cross/native build.
1428 if test x${host} = x${target} ; then
1429 tmake_dlldir_file="i386/t-dlldir"
1431 tmake_dlldir_file="i386/t-dlldir-x"
1433 tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming i386/t-cygwin"
1434 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1435 extra_options="${extra_options} i386/cygming.opt"
1436 extra_objs="winnt.o winnt-stubs.o"
1437 c_target_objs="${c_target_objs} msformat-c.o"
1438 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1439 if test x$enable_threads = xyes; then
1444 i[34567]86-*-mingw* | x86_64-*-mingw*)
1445 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1446 xm_file=i386/xm-mingw32.h
1448 x86_64-*-* | *-w64-*)
1449 need_64bit_hwint=yes
1455 # This makes the logic if mingw's or the w64 feature set has to be used
1458 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1459 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1460 tm_file="${tm_file} i386/mingw-w64.h"
1461 if test x$enable_targets = xall; then
1462 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1463 case X"${with_cpu}" in
1464 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1467 if test x$with_cpu_64 = x; then
1472 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1473 echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1482 tm_file="${tm_file} i386/mingw-stdint.h"
1483 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1484 if test x$sjlj = x0; then
1485 tmake_eh_file="i386/t-dw2-eh"
1487 tmake_eh_file="i386/t-sjlj-eh"
1489 # Shared libgcc DLL install dir depends on cross/native build.
1490 if test x${host} = x${target} ; then
1491 tmake_dlldir_file="i386/t-dlldir"
1493 tmake_dlldir_file="i386/t-dlldir-x"
1495 tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming t-dfprules"
1498 tmake_file="${tmake_file} i386/t-mingw-w64"
1501 tmake_file="${tmake_file} i386/t-mingw-w32"
1504 tmake_file="${tmake_file} i386/t-mingw32"
1507 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1508 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1511 extra_options="${extra_options} i386/mingw-w64.opt"
1516 extra_objs="winnt.o winnt-stubs.o"
1517 c_target_objs="${c_target_objs} msformat-c.o"
1518 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1519 default_use_cxa_atexit=yes
1521 case ${enable_threads} in
1522 "" | yes | win32) thread_file='win32'
1523 tmake_file="${tmake_file} i386/t-gthr-win32"
1528 tmake_file="${tmake_file} i386/t-crtfm"
1535 tm_file="${tm_file} i386/crtdll.h"
1537 *mingw32msv* | *mingw*)
1541 i[34567]86-*-interix3*)
1542 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1543 tmake_file="${tmake_file} i386/t-interix"
1544 extra_options="${extra_options} rpath.opt interix.opt"
1546 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1547 if test x$enable_threads = xyes ; then
1550 if test x$stabs = xyes ; then
1551 tm_file="${tm_file} dbxcoff.h"
1555 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1556 tmake_file="ia64/t-ia64"
1557 target_cpu_default="0"
1558 if test x$gas = xyes
1560 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1562 if test x$gnu_ld = xyes
1564 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1566 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1569 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1570 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1571 tmake_file="${tmake_file} ia64/t-ia64"
1572 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1575 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1576 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1577 if test x$with_system_libunwind != xyes ; then
1578 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1580 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1581 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1584 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
1585 tmake_file="ia64/t-ia64 ia64/t-hpux"
1586 target_cpu_default="MASK_GNU_AS"
1587 case x$enable_threads in
1593 c_target_objs="ia64-c.o"
1594 cxx_target_objs="ia64-c.o"
1595 extra_options="${extra_options} ia64/ilp32.opt"
1597 tm_file="${tm_file} hpux-stdint.h"
1600 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1601 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1602 tmake_file="vms/t-vms ia64/t-ia64 ia64/t-vms"
1603 xmake_file=vms/x-vms
1604 target_cpu_default="0"
1605 if test x$gas = xyes
1607 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1610 install_headers_dir=install-headers-cp
1611 extra_options="${extra_options} vms/vms.opt"
1614 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
1615 tmake_file=iq2000/t-iq2000
1616 out_file=iq2000/iq2000.c
1617 md_file=iq2000/iq2000.md
1620 tm_file="dbxelf.h elfos.h ${tm_file}"
1621 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1624 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1625 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1626 tmake_file="${tmake_file} t-rtems"
1629 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
1630 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1633 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1634 extra_parts="crtinit.o crtfini.o"
1637 tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
1638 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1641 tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1642 tmake_file="m32r/t-m32r t-rtems"
1643 extra_parts="crtinit.o crtfini.o"
1646 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1647 # We override the tmake_file for linux -- why?
1648 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1650 if test x$enable_threads = xyes; then
1655 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1656 # We override the tmake_file for linux -- why?
1657 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1659 if test x$enable_threads = xyes; then
1663 # m68hc11 and m68hc12 share the same machine description.
1664 m68hc11-*-*|m6811-*-*)
1665 tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1666 tm_p_file="m68hc11/m68hc11-protos.h"
1667 md_file="m68hc11/m68hc11.md"
1668 out_file="m68hc11/m68hc11.c"
1669 tmake_file="m68hc11/t-m68hc11"
1672 m68hc12-*-*|m6812-*-*)
1673 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1674 tm_p_file="m68hc11/m68hc11-protos.h"
1675 md_file="m68hc11/m68hc11.md"
1676 out_file="m68hc11/m68hc11.c"
1677 tmake_file="m68hc11/t-m68hc11"
1678 extra_options="${extra_options} m68hc11/m68hc11.opt"
1681 m68k-*-elf* | fido-*-elf*)
1684 # Check that $with_cpu makes sense.
1689 echo "Cannot accept --with-cpu=$with_cpu"
1696 default_m68k_cpu=68020
1700 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1701 tm_defines="${tm_defines} MOTOROLA=1"
1702 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1703 # Add multilibs for targets other than fido.
1708 tmake_file="$tmake_file m68k/t-mlibs"
1711 extra_parts="crtbegin.o crtend.o"
1714 default_m68k_cpu=68020
1716 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1717 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1718 tm_defines="${tm_defines} MOTOROLA=1"
1721 default_m68k_cpu=68020
1723 # needed to unconfuse gdb
1724 tm_defines="${tm_defines} OBSD_OLD_GAS"
1725 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1726 extra_options="${extra_options} openbsd.opt"
1727 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1728 # we need collect2 until our bug is fixed...
1731 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1732 # with uClibc, using the original
1733 # m68k-elf-based ABI
1734 default_m68k_cpu=68020
1736 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1737 tm_defines="${tm_defines} MOTOROLA=1"
1738 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1740 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1741 # with uClibc, using the new GNU/Linux-style
1743 default_m68k_cpu=68020
1745 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1746 tm_defines="${tm_defines} MOTOROLA=1"
1747 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1749 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1750 # with ELF format using glibc 2
1751 # aka the GNU/Linux C library 6.
1752 default_m68k_cpu=68020
1754 with_arch=${with_arch:-m68k}
1755 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1756 extra_options="${extra_options} m68k/ieee.opt"
1757 tm_defines="${tm_defines} MOTOROLA=1"
1758 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1759 # if not configured with --enable-sjlj-exceptions, bump the
1760 # libgcc version number
1761 if test x$sjlj != x1; then
1762 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1766 default_m68k_cpu=68020
1768 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1769 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1770 tm_defines="${tm_defines} MOTOROLA=1"
1771 extra_parts="crtbegin.o crtend.o"
1774 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1775 tmake_file=mcore/t-mcore
1779 tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1780 tmake_file=mcore/t-mcore-pe
1785 tm_file="dbxelf.h elfos.h ${tm_file}"
1786 tmake_file=mep/t-mep
1787 extra_parts="crtbegin.o crtend.o"
1788 c_target_objs="mep-pragma.o"
1789 cxx_target_objs="mep-pragma.o"
1790 if test -d "${srcdir}/../newlib/libc/include" &&
1791 test "x$with_headers" = x; then
1797 tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
1798 c_target_objs="${c_target_objs} microblaze-c.o"
1799 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1800 tmake_file="${tmake_file} t-slibgcc-elf-ver t-slibgcc-nolc-override t-linux microblaze/t-microblaze"
1801 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o crtbeginT.o"
1804 tm_file="${tm_file} dbxelf.h"
1805 c_target_objs="${c_target_objs} microblaze-c.o"
1806 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1807 tmake_file="${tmake_file} microblaze/t-microblaze"
1810 tm_file="elfos.h ${tm_file} mips/iris6.h"
1811 tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
1812 extra_options="${extra_options} rpath.opt"
1813 target_cpu_default="MASK_ABICALLS"
1814 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1815 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1817 if test "x$stabs" = xyes
1819 tm_file="${tm_file} dbx.h"
1821 if test "x$gnu_ld" = xyes
1823 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1825 case ${enable_threads}:${have_pthread_h} in
1826 "":yes | yes:yes ) thread_file=posix ;;
1829 mips*-*-netbsd*) # NetBSD/mips, either endian.
1830 target_cpu_default="MASK_ABICALLS"
1831 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1832 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1834 mips64*-*-linux* | mipsisa64*-*-linux*)
1835 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1836 tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1837 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1839 mips64el-st-linux-gnu)
1840 tm_file="${tm_file} mips/st.h"
1841 tmake_file="${tmake_file} mips/t-st"
1843 mips64octeon*-*-linux*)
1844 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1845 target_cpu_default=MASK_SOFT_FLOAT_ABI
1847 mipsisa64r2*-*-linux*)
1848 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1851 extra_parts="$extra_parts crtfastmath.o"
1854 test x$with_llsc != x || with_llsc=yes
1856 mips*-*-linux*) # Linux MIPS, either endian.
1857 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1858 tmake_file="${tmake_file} mips/t-libgcc-mips16"
1861 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1864 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1866 extra_parts="$extra_parts crtfastmath.o"
1867 test x$with_llsc != x || with_llsc=yes
1870 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1871 target_cpu_default="MASK_ABICALLS"
1872 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1873 extra_options="${extra_options} openbsd.opt"
1876 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1877 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1881 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1882 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1883 extra_options="${extra_options} mips/sde.opt"
1884 case "${with_newlib}" in
1886 # newlib / libgloss.
1889 # MIPS toolkit libraries.
1890 tm_file="$tm_file mips/sdemtk.h"
1891 tmake_file="$tmake_file mips/t-sdemtk"
1892 case ${enable_threads} in
1894 thread_file='mipssde'
1901 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1904 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1907 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1910 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1914 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1915 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1916 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1917 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1918 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1919 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1922 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1925 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1928 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1931 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1935 mipsisa32*-*-elfoabi*)
1936 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1937 tm_file="${tm_file} mips/elfoabi.h"
1939 mipsisa64*-*-elfoabi*)
1940 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1941 tm_file="${tm_file} mips/elfoabi.h"
1944 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1948 mipsisa64sr71k-*-elf*)
1949 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1950 tmake_file=mips/t-sr71k
1951 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1952 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1954 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1955 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1956 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1957 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1958 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1960 mips-*-elf* | mipsel-*-elf*)
1961 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1962 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1964 mips64-*-elf* | mips64el-*-elf*)
1965 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1966 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1967 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1968 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1970 mips64vr-*-elf* | mips64vrel-*-elf*)
1971 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1972 tmake_file=mips/t-vr
1973 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1975 mips64orion-*-elf* | mips64orionel-*-elf*)
1976 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1977 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1978 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1979 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1982 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1983 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1986 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1987 tmake_file="${tmake_file} mips/t-vxworks"
1989 mipstx39-*-elf* | mipstx39el-*-elf*)
1990 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1991 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1993 mmix-knuth-mmixware)
1994 tm_file="${tm_file} newlib-stdint.h"
1995 need_64bit_hwint=yes
1999 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2000 if test x$stabs = xyes
2002 tm_file="${tm_file} dbx.h"
2008 tm_file="${tm_file} newlib-stdint.h"
2012 tm_file="${tm_file} newlib-stdint.h"
2014 tmake_file="picochip/t-picochip t-pnt16-warn"
2016 # port not yet contributed
2017 #powerpc-*-openbsd*)
2018 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
2022 extra_options="${extra_options} rs6000/darwin.opt"
2023 extra_parts="crt2.o"
2025 *-darwin1[0-9]* | *-darwin[8-9]*)
2026 tmake_file="${tmake_file} rs6000/t-darwin8"
2027 tm_file="${tm_file} rs6000/darwin8.h"
2030 tm_file="${tm_file} rs6000/darwin7.h"
2035 tmake_file="${tmake_file} t-slibgcc-darwin"
2036 extra_headers=altivec.h
2038 powerpc64-*-darwin*)
2039 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2040 extra_parts="crt2.o"
2041 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin"
2042 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
2043 extra_headers=altivec.h
2045 powerpc*-*-freebsd*)
2046 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
2047 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2048 extra_options="${extra_options} rs6000/sysv4.opt"
2051 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2052 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2053 tmake_file="${tmake_file} rs6000/t-netbsd"
2054 extra_options="${extra_options} rs6000/sysv4.opt"
2057 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
2058 extra_options="${extra_options} rs6000/sysv4.opt"
2059 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2062 powerpc-*-eabisimaltivec*)
2063 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2064 extra_options="${extra_options} rs6000/sysv4.opt"
2065 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2069 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2070 extra_options="${extra_options} rs6000/sysv4.opt"
2071 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2075 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2076 extra_options="${extra_options} rs6000/sysv4.opt"
2077 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2079 powerpc-*-eabialtivec*)
2080 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2081 extra_options="${extra_options} rs6000/sysv4.opt"
2082 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2085 powerpc-xilinx-eabi*)
2086 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2087 extra_options="${extra_options} rs6000/sysv4.opt"
2088 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2092 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2093 extra_options="${extra_options} rs6000/sysv4.opt"
2094 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2098 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2099 extra_options="${extra_options} rs6000/sysv4.opt"
2100 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2102 powerpc-*-linux* | powerpc64-*-linux*)
2103 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
2104 extra_options="${extra_options} rs6000/sysv4.opt"
2105 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2108 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2109 echo "*** Configuration ${target} not supported" 1>&2
2112 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2116 test x$with_cpu != x || cpu_is_64bit=yes
2120 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2121 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2122 if test x$cpu_is_64bit = xyes; then
2123 tm_file="${tm_file} rs6000/default64.h"
2125 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2126 tmake_file="$tmake_file rs6000/t-linux64"
2127 extra_options="${extra_options} rs6000/linux64.opt"
2130 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2133 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
2135 powerpc*-*-linux*altivec*)
2136 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2137 powerpc*-*-linux*spe*)
2138 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2139 powerpc*-*-linux*paired*)
2140 tm_file="${tm_file} rs6000/750cl.h" ;;
2142 if test x${enable_secureplt} = xyes; then
2143 tm_file="rs6000/secureplt.h ${tm_file}"
2147 tm_file="${tm_file} elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
2148 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
2149 tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
2151 powerpc-*-gnu-gnualtivec*)
2152 tm_file="${cpu_type}/${cpu_type}.h elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
2153 extra_options="${extra_options} rs6000/sysv4.opt"
2154 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2155 if test x$enable_threads = xyes; then
2160 tm_file="${cpu_type}/${cpu_type}.h elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
2161 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2162 extra_options="${extra_options} rs6000/sysv4.opt"
2163 if test x$enable_threads = xyes; then
2167 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2168 tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
2169 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
2170 extra_options="${extra_options} rs6000/sysv4.opt"
2171 extra_headers=ppc-asm.h
2174 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
2175 tmake_file="${tmake_file} rs6000/t-vxworksae"
2178 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2184 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2185 tmake_file="t-lynx rs6000/t-lynx"
2186 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2187 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2193 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2194 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2195 extra_options="${extra_options} rs6000/sysv4.opt"
2197 powerpcle-*-eabisim*)
2198 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2199 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2200 extra_options="${extra_options} rs6000/sysv4.opt"
2204 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2205 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2206 extra_options="${extra_options} rs6000/sysv4.opt"
2209 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2210 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2211 tmake_file=rs6000/t-aix43
2212 extra_options="${extra_options} rs6000/aix64.opt"
2215 use_gcc_stdint=provide
2218 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2219 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2220 extra_options="${extra_options} rs6000/aix64.opt"
2221 tmake_file=rs6000/t-aix43
2227 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2228 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2229 tmake_file=rs6000/t-aix52
2230 extra_options="${extra_options} rs6000/aix64.opt"
2236 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2237 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2238 tmake_file=rs6000/t-aix52
2239 extra_options="${extra_options} rs6000/aix64.opt"
2243 extra_headers=altivec.h
2245 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2246 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2247 tmake_file=rs6000/t-aix52
2248 extra_options="${extra_options} rs6000/aix64.opt"
2252 extra_headers=altivec.h
2255 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
2256 tmake_file="${tmake_file} rx/t-rx"
2259 tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2262 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2263 tm_p_file=s390/s390-protos.h
2264 md_file=s390/s390.md
2265 extra_modes=s390/s390-modes.def
2266 out_file=s390/s390.c
2267 tmake_file="${tmake_file} s390/t-linux64"
2270 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
2271 tm_p_file=s390/s390-protos.h
2272 md_file=s390/s390.md
2273 extra_modes=s390/s390-modes.def
2274 out_file=s390/s390.c
2275 extra_parts="crtbeginS.o crtendS.o"
2277 extra_options="${extra_options} s390/tpf.opt"
2280 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2281 tmake_file=score/t-score-elf
2282 extra_objs="score7.o score3.o"
2284 sh-*-elf* | sh[12346l]*-*-elf* | \
2285 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2286 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2287 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2288 sh64-*-netbsd* | sh64l*-*-netbsd*)
2289 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2290 if test x${with_endian} = x; then
2292 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2293 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2294 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2295 shl* | sh64l* | sh*-*-linux* | \
2296 sh5l* | sh-superh-elf) with_endian=little,big ;;
2297 sh[1234]*-*-*) with_endian=big ;;
2298 *) with_endian=big,little ;;
2301 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2302 # First word : the default endian.
2303 # Second word: the secondary endian (optional).
2304 case ${with_endian} in
2305 big) TM_ENDIAN_CONFIG=mb ;;
2306 little) TM_ENDIAN_CONFIG=ml ;;
2307 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2308 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2309 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2311 case ${with_endian} in
2312 little*) tm_file="sh/little.h ${tm_file}" ;;
2314 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
2316 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2317 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
2319 tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
2320 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2323 sh*-superh-elf) if test x$with_libgloss != xno; then
2325 tm_file="${tm_file} sh/newlib.h"
2327 tm_file="${tm_file} sh/embed-elf.h"
2328 tm_file="${tm_file} sh/superh.h"
2329 tmake_file="${tmake_file} sh/t-superh"
2330 extra_options="${extra_options} sh/superh.opt" ;;
2331 *) if test x$with_newlib = xyes \
2332 && test x$with_libgloss = xyes; then
2333 tm_file="${tm_file} sh/newlib.h"
2335 tm_file="${tm_file} sh/embed-elf.h" ;;
2339 # SHmedia, 32-bit ABI
2340 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2343 # SHmedia, 64-bit ABI
2344 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2347 tmake_file="${tmake_file} sh/t-netbsd"
2350 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2351 tm_file="${tm_file} sh/sh64.h"
2352 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2355 tmake_file="${tmake_file} sh/t-sh64"
2356 tm_file="${tm_file} sh/sh64.h"
2357 if test x$with_newlib = xyes; then
2358 tm_file="${tm_file} newlib-stdint.h"
2360 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2363 tmake_file="sh/t-symbian"
2364 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2365 c_target_objs="symbian-base.o symbian-c.o"
2366 cxx_target_objs="symbian-base.o symbian-cxx.o"
2367 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2370 tm_file="${tm_file} newlib-stdint.h"
2373 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2374 case `echo ${target} | sed 's/e[lb]-/-/'` in
2375 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2376 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2377 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2378 sh4a_single*) sh_cpu_target=sh4a-single ;;
2379 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2380 sh4al) sh_cpu_target=sh4al ;;
2381 sh4a*) sh_cpu_target=sh4a ;;
2382 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2383 sh4_single*) sh_cpu_target=sh4-single ;;
2384 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2385 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2386 sh3e*) sh_cpu_target=sh3e ;;
2387 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2388 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2389 sh2a_single*) sh_cpu_target=sh2a-single ;;
2390 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2391 sh2a*) sh_cpu_target=sh2a ;;
2392 sh2e*) sh_cpu_target=sh2e ;;
2393 sh2*) sh_cpu_target=sh2 ;;
2394 *) sh_cpu_target=sh1 ;;
2396 # did the user say --without-fp ?
2397 if test x$with_fp = xno; then
2398 case ${sh_cpu_target} in
2399 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2401 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2402 sh4*) sh_cpu_target=sh4-nofpu ;;
2403 sh3*) sh_cpu_target=sh3 ;;
2404 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2405 sh2*) sh_cpu_target=sh2 ;;
2406 *) echo --without-fp not available for $target: ignored
2408 tm_defines="$tm_defines STRICT_NOFPU=1"
2410 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2411 case $sh_cpu_default in
2412 sh5-64media-nofpu | sh5-64media | \
2413 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2414 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2415 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2416 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2417 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2418 "") sh_cpu_default=${sh_cpu_target} ;;
2419 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2421 sh_multilibs=${with_multilib_list}
2422 if test "$sh_multilibs" = "default" ; then
2424 sh64-superh-linux* | \
2425 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2426 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2427 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2428 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2429 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2430 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2432 if test x$with_fp = xno; then
2433 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2436 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2437 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2438 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2439 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2440 for sh_multilib in ${sh_multilibs}; do
2441 case ${sh_multilib} in
2442 m1 | m2 | m2e | m3 | m3e | \
2443 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2444 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2445 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2446 m5-64media | m5-64media-nofpu | \
2447 m5-32media | m5-32media-nofpu | \
2448 m5-compact | m5-compact-nofpu)
2449 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2450 # It is passed to MULTIILIB_OPTIONS verbatim.
2451 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2452 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2454 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2455 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2456 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2458 echo "with_multilib_list=${sh_multilib} not supported."
2463 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2464 if test x${enable_incomplete_targets} = xyes ; then
2465 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2467 tm_file="$tm_file ./sysroot-suffix.h"
2468 tmake_file="$tmake_file t-sysroot-suffix"
2471 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2472 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2475 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2476 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2479 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
2482 tmake_file="sparc/t-leon"
2485 tmake_file="sparc/t-leon3"
2488 tmake_file="sparc/t-elf"
2491 tmake_file="${tmake_file} sparc/t-crtfm"
2492 extra_parts="crtbegin.o crtend.o"
2495 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2496 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2497 extra_parts="crtbegin.o crtend.o"
2500 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h"
2501 extra_options="${extra_options} sparc/long-double-switch.opt"
2504 tmake_file="${tmake_file} sparc/t-leon"
2507 tmake_file="${tmake_file} sparc/t-leon3"
2510 tmake_file="${tmake_file} sparc/t-linux"
2513 if test x$enable_targets = xall; then
2514 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2515 tmake_file="${tmake_file} sparc/t-linux64"
2517 tm_file="${tm_file} sparc/linux.h"
2519 tmake_file="${tmake_file} sparc/t-crtfm"
2522 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2523 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2524 extra_options="${extra_options} sparc/long-double-switch.opt"
2527 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sol2.h"
2529 *-*-solaris2.1[0-9]*)
2530 tm_file="${tm_file} sol2-10.h"
2534 use_gcc_stdint=provide
2537 tm_file="${tm_file} sparc/sol2.h"
2539 sparc64-*-* | sparcv9-*-*)
2540 tm_file="${tm_file} sparc/sol2-64.h"
2543 test x$with_cpu != x || with_cpu=v9
2546 tm_file="${tm_file} sparc/sol2-bi.h"
2547 if test x$gas = xyes; then
2548 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2550 if test x$gnu_ld = xyes; then
2551 tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
2553 tm_file="${tm_file} tm-dwarf2.h"
2554 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2555 if test x$gnu_ld = xyes; then
2556 tmake_file="$tmake_file t-slibgcc-elf-ver"
2558 tmake_file="$tmake_file t-slibgcc-sld"
2560 if test x$gas = xyes; then
2561 tm_file="usegas.h ${tm_file}"
2563 c_target_objs="sol2-c.o"
2564 cxx_target_objs="sol2-c.o"
2566 tm_p_file="${tm_p_file} sol2-protos.h"
2567 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2568 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2569 "":yes:* | yes:yes:* )
2572 "":*:yes | yes:*:yes )
2578 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2579 tmake_file="${tmake_file} sparc/t-vxworks"
2582 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2583 extra_options="${extra_options} sparc/little-endian.opt"
2584 tmake_file="${tmake_file} sparc/t-crtfm"
2585 extra_parts="crtbegin.o crtend.o"
2588 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2589 extra_options="${extra_options} sparc/little-endian.opt"
2590 tmake_file="${tmake_file} sparc/t-crtfm t-rtems"
2591 extra_parts="crtbegin.o crtend.o"
2594 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/linux64.h"
2595 extra_options="${extra_options} sparc/long-double-switch.opt"
2596 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2598 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2599 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2600 extra_options="${extra_options} sparc/long-double-switch.opt"
2601 tmake_file="${tmake_file} sparc/t-crtfm"
2602 case "x$with_cpu" in
2604 x) with_cpu=ultrasparc ;;
2605 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2609 tm_file="sparc/biarch64.h ${tm_file}"
2610 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2611 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2612 extra_options="${extra_options} sparc/long-double-switch.opt"
2613 tmake_file="${tmake_file} sparc/t-netbsd64"
2616 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
2617 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2618 extra_options="${extra_options} openbsd.opt"
2619 extra_options="${extra_options} sparc/little-endian.opt"
2624 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2625 tmake_file="spu/t-spu-elf"
2626 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2627 extra_modes=spu/spu-modes.def
2628 c_target_objs="${c_target_objs} spu-c.o"
2629 cxx_target_objs="${cxx_target_objs} spu-c.o"
2632 target_cpu_default="TARGET_CPU_v850e1"
2633 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2634 tm_p_file=v850/v850-protos.h
2635 tmake_file=v850/t-v850e
2636 md_file=v850/v850.md
2637 extra_modes=v850/v850-modes.def
2638 out_file=v850/v850.c
2639 extra_options="${extra_options} v850/v850.opt"
2640 if test x$stabs = xyes
2642 tm_file="${tm_file} dbx.h"
2645 c_target_objs="v850-c.o"
2646 cxx_target_objs="v850-c.o"
2650 target_cpu_default="TARGET_CPU_v850e"
2651 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2652 tm_p_file=v850/v850-protos.h
2653 tmake_file=v850/t-v850e
2654 md_file=v850/v850.md
2655 extra_modes=v850/v850-modes.def
2656 out_file=v850/v850.c
2657 extra_options="${extra_options} v850/v850.opt"
2658 if test x$stabs = xyes
2660 tm_file="${tm_file} dbx.h"
2663 c_target_objs="v850-c.o"
2664 cxx_target_objs="v850-c.o"
2668 target_cpu_default="TARGET_CPU_generic"
2669 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2670 tmake_file=v850/t-v850
2671 if test x$stabs = xyes
2673 tm_file="${tm_file} dbx.h"
2676 c_target_objs="v850-c.o"
2677 cxx_target_objs="v850-c.o"
2681 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
2682 tmake_file="${tmake_file} vax/t-linux"
2685 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2686 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2689 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2690 extra_options="${extra_options} netbsd.opt"
2696 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2697 extra_options="${extra_options} openbsd.opt"
2701 # For historical reasons, the target files omit the 'x'.
2702 tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
2703 tm_p_file=stormy16/stormy16-protos.h
2704 md_file=stormy16/stormy16.md
2705 out_file=stormy16/stormy16.c
2706 extra_options=stormy16/stormy16.opt
2707 tmake_file="stormy16/t-stormy16"
2708 extra_parts="crtbegin.o crtend.o"
2711 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
2712 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2715 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
2716 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2719 tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
2720 tmake_file="${tmake_file} mn10300/t-linux"
2722 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2726 tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2727 tmake_file="${tmake_file} t-rtems"
2728 c_target_objs="m32c-pragma.o"
2729 cxx_target_objs="m32c-pragma.o"
2732 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2733 c_target_objs="m32c-pragma.o"
2734 cxx_target_objs="m32c-pragma.o"
2737 echo "*** Configuration ${target} not supported" 1>&2
2743 i[34567]86-*-linux* | x86_64-*-linux*)
2744 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2746 i[34567]86-*-* | x86_64-*-*)
2747 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2749 powerpc*-*-* | rs6000-*-*)
2750 tm_file="${tm_file} rs6000/option-defaults.h"
2753 # Support for --with-cpu and related options (and a few unrelated options,
2757 echo "--with-cpu must be passed a value" 1>&2
2762 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2763 # to generic if there is no processor scheduler model for the target.
2766 arch_without_sse2=no
2767 arch_without_64bit=no
2772 arch_without_sse2=yes
2773 arch_without_64bit=yes
2778 arch_without_sse2=yes
2779 arch_without_64bit=yes
2782 arch_without_sse2=yes
2783 arch_without_64bit=yes
2784 case ${target_noncanonical} in
2797 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2807 i686-*-* | i786-*-*)
2808 case ${target_noncanonical} in
2817 amdfam10-*|barcelona-*)
2821 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2825 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2829 athlon_xp-*|athlon_mp-*|athlon_4-*)
2832 arch_without_sse2=yes
2833 arch_without_64bit=yes
2835 athlon_tbird-*|athlon-*)
2838 arch_without_sse2=yes
2843 arch_without_sse2=yes
2848 arch_without_sse2=yes
2850 pentium3-*|pentium3m-*)
2853 arch_without_sse2=yes
2855 pentium4-*|pentium4m-*)
2890 arch_without_sse2=yes
2895 arch_without_sse2=yes
2896 arch_without_64bit=yes
2901 case ${target_noncanonical} in
2910 amdfam10-*|barcelona-*)
2914 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2918 k8-*|opteron-*|athlon_64-*)
2946 # If there is no $with_cpu option, try to infer one from ${target}.
2947 # This block sets nothing except for with_cpu.
2948 if test x$with_cpu = x ; then
2950 i[34567]86-*-*|x86_64-*-*)
2968 frv-*-*linux* | frv400-*-*linux*)
2975 case "$with_arch" in
2977 with_cpu=${default_cf_cpu}
2980 with_cpu=m${default_m68k_cpu}
2991 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2995 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2997 i[34567]86-*-*|x86_64-*-*)
2998 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2999 if test x$with_cpu_32 = x; then
3000 with_cpu_32=$with_cpu
3002 if test x$with_cpu_64 = x; then
3003 with_cpu_64=$with_cpu
3011 # Support for --with-arch and related options (and a few unrelated options,
3013 case ${with_arch} in
3015 echo "--with-arch must be passed a value" 1>&2
3020 # If there is no $with_arch option, try to infer one from ${target}.
3021 # This block sets nothing except for with_arch.
3022 if test x$with_arch = x ; then
3024 i[34567]86-*-darwin*|x86_64-*-darwin*)
3025 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
3026 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
3029 # --with-fpmath sets the default ISA to SSE2, which is the same
3030 # ISA supported by Pentium 4.
3031 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
3042 # Avoid overriding --with-arch-32 and --with-arch-64 values.
3044 i[34567]86-*-darwin*|x86_64-*-darwin*)
3045 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
3046 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
3048 i[34567]86-*-*|x86_64-*-*)
3049 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
3050 if test x$with_arch_32 = x; then
3051 with_arch_32=$with_arch
3053 if test x$with_arch_64 = x; then
3054 if test $arch_without_64bit = yes; then
3055 # Set the default 64bit arch to x86-64 if the default arch
3056 # doesn't support 64bit.
3059 with_arch_64=$with_arch
3063 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
3064 # Set the default 64bit arch to x86-64 if the default arch
3065 # doesn't support 64bit and we need 64bit ISA.
3066 with_arch_32=$with_arch
3074 # Support --with-fpmath.
3075 if test x$with_fpmath != x; then
3077 i[34567]86-*-* | x86_64-*-*)
3078 case ${with_fpmath} in
3080 tm_file="${tm_file} i386/avxmath.h"
3083 tm_file="${tm_file} i386/ssemath.h"
3086 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3092 echo "--with-fpmath isn't supported for $target." 1>&2
3098 # Similarly for --with-schedule.
3099 if test x$with_schedule = x; then
3102 # Override default PA8000 scheduling model.
3103 with_schedule=7100LC
3108 # Validate and mark as valid any --with options supported
3109 # by this target. In order to use a particular --with option
3110 # you must list it in supported_defaults; validating the value
3111 # is optional. This case statement should set nothing besides
3112 # supported_defaults.
3117 supported_defaults="cpu tune"
3118 for which in cpu tune; do
3119 eval "val=\$with_$which"
3122 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3123 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3127 echo "Unknown CPU used in --with-$which=$val" 1>&2
3135 supported_defaults="arch cpu float tune fpu abi mode"
3136 for which in cpu tune; do
3137 # See if it matches any of the entries in arm-cores.def
3138 eval "val=\$with_$which"
3139 if [ x"$val" = x ] \
3140 || grep "^ARM_CORE(\"$val\"," \
3141 ${srcdir}/config/arm/arm-cores.def \
3144 new_val=`grep "^ARM_CORE(\"$val\"," \
3145 ${srcdir}/config/arm/arm-cores.def | \
3146 sed -e 's/^[^,]*,[ ]*//' | \
3148 eval "target_${which}_cname=$new_val"
3149 echo "For $val real value is $new_val"
3152 echo "Unknown CPU used in --with-$which=$val" 1>&2
3157 case "$with_arch" in
3159 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3160 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3161 | armv7 | armv7-a | armv7-r | armv7-m \
3166 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3171 case "$with_float" in
3173 | soft | hard | softfp)
3177 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3184 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
3185 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3186 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3187 | fpv4-sp-d16 | neon-vfpv4)
3191 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3198 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3202 echo "Unknown ABI used in --with-abi=$with_abi"
3207 case "$with_mode" in
3213 echo "Unknown mode used in --with-mode=$with_mode"
3218 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3219 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3224 supported_defaults=cpu
3229 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3235 fido-*-* | m68k*-*-*)
3236 supported_defaults="arch cpu"
3237 case "$with_arch" in
3239 m68k_arch_family="$with_arch"
3242 echo "Invalid --with-arch=$with_arch" 1>&2
3247 # We always have a $with_cpu setting here.
3249 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3250 m68k_cpu_ident=$with_cpu
3253 m68k_cpu_ident=m68020
3254 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3257 m68k_cpu_ident=m68020
3258 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3261 # We need the C identifier rather than the string.
3262 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3263 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3264 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3265 ${srcdir}/config/m68k/m68k-devices.def`
3266 if [ x"$m68k_cpu_ident" = x ] ; then
3267 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3270 with_cpu="mcpu=$with_cpu"
3276 supported_defaults="arch schedule"
3278 case "$with_arch" in
3279 "" | 1.0 | 1.1 | 2.0)
3283 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3288 case "$with_schedule" in
3289 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3293 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3299 i[34567]86-*-* | x86_64-*-*)
3300 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3301 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3302 eval "val=\$with_$which"
3305 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3306 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3307 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3308 | athlon-4 | athlon-xp | athlon-mp | geode \
3309 | prescott | pentium-m | pentium4m | pentium3m)
3316 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3324 "" | x86-64 | generic | native \
3325 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3326 | opteron-sse3 | athlon-fx | bdver1 | btver1 | amdfam10 \
3327 | barcelona | nocona | core2 | corei7 | corei7-avx | atom)
3331 echo "Unknown CPU given in --with-$which=$val." 1>&2
3339 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3341 case ${with_float} in
3346 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3352 "" | 32 | o64 | n32 | 64 | eabi)
3356 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3361 case ${with_divide} in
3362 "" | breaks | traps)
3366 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3371 case ${with_llsc} in
3382 echo "Unknown llsc type used in --with-llsc" 1>&2
3387 case ${with_mips_plt} in
3392 with_mips_plt=no-plt
3397 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3402 case ${with_synci} in
3407 # No is the default.
3411 echo "Unknown synci type used in --with-synci" 1>&2
3417 powerpc*-*-* | rs6000-*-*)
3418 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3420 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3421 eval "val=\$with_$which"
3423 default32 | default64)
3428 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3432 with_which="with_$which"
3436 tm_defines="${tm_defines} CONFIG_PPC405CR"
3437 eval "with_$which=405"
3440 | power | power[234567] | power6x | powerpc | powerpc64 \
3441 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3442 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3443 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3444 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3445 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3446 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3450 echo "Unknown cpu used in --with-$which=$val." 1>&2
3458 supported_defaults="arch mode tune"
3460 for which in arch tune; do
3461 eval "val=\$with_$which"
3463 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3467 echo "Unknown cpu used in --with-$which=$val." 1>&2
3473 case ${with_mode} in
3478 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3484 sh[123456ble]-*-* | sh-*-*)
3485 supported_defaults="cpu"
3486 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3487 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3490 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3492 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3495 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3496 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3497 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3498 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3504 supported_defaults="cpu float tune"
3506 for which in cpu tune; do
3507 eval "val=\$with_$which"
3509 "" | sparc | sparcv9 | sparc64 \
3511 | v8 | supersparc | hypersparc | leon \
3512 | sparclite | f930 | f934 | sparclite86x \
3513 | sparclet | tsc701 \
3514 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3518 echo "Unknown cpu used in --with-$which=$val" 1>&2
3524 case ${with_float} in
3529 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3536 supported_defaults="arch tune"
3538 for which in arch tune; do
3539 eval "val=\$with_$which"
3541 "" | cell | celledp)
3545 echo "Unknown cpu used in --with-$which=$val." 1>&2
3553 supported_defaults=cpu
3555 "" | v850e | v850e1)
3559 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3566 # Set some miscellaneous flags for particular targets.
3567 target_cpu_default2=
3570 if test x$gas = xyes
3572 target_cpu_default2="MASK_GAS"
3577 if test x$target_cpu_cname = x
3579 target_cpu_default2=TARGET_CPU_generic
3581 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3586 target_cpu_default2="MASK_BIG_SWITCH"
3587 if test x$gas = xyes
3589 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3593 fido*-*-* | m68k*-*-*)
3594 target_cpu_default2=$m68k_cpu_ident
3595 if [ x"$m68k_arch_family" != x ]; then
3596 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3600 i[34567]86-*-darwin* | x86_64-*-darwin*)
3601 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3603 i[34567]86-*-linux* | x86_64-*-linux* | \
3604 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3606 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3608 i[34567]86-*-solaris2*)
3609 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3611 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3612 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3614 i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3615 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3618 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3622 if test x$gnu_ld = xyes
3624 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3628 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3631 tmake_file="mips/t-mips $tmake_file"
3634 powerpc*-*-* | rs6000-*-*)
3635 # FIXME: The PowerPC port uses the value set at compile time,
3636 # although it's only cosmetic.
3637 if test "x$with_cpu" != x
3639 target_cpu_default2="\\\"$with_cpu\\\""
3641 out_file=rs6000/rs6000.c
3642 c_target_objs="${c_target_objs} rs6000-c.o"
3643 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3644 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3646 if test x$enable_e500_double = xyes
3648 tm_file="$tm_file rs6000/e500-double.h"
3652 sh[123456ble]*-*-* | sh-*-*)
3653 c_target_objs="${c_target_objs} sh-c.o"
3654 cxx_target_objs="${cxx_target_objs} sh-c.o"
3658 if test x$with_tune = x ; then
3662 # The SPARC port checks this value at compile-time.
3663 target_cpu_default2="TARGET_CPU_$with_cpu"
3667 # Some standard aliases.
3672 xsparcv9 | xsparc64)
3677 # The SPARC port checks this value at compile-time.
3678 target_cpu_default2="TARGET_CPU_$with_cpu"
3682 # FIXME: The v850 is "special" in that it does not support
3683 # runtime CPU selection, only --with-cpu.
3684 case "x$with_cpu" in
3688 target_cpu_default2="TARGET_CPU_$with_cpu"
3695 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3696 for option in $all_defaults
3698 eval "val=\$with_"`echo $option | sed s/-/_/g`
3699 if test -n "$val"; then
3700 case " $supported_defaults " in
3704 echo "This target does not support --with-$option." 2>&1
3705 echo "Valid --with options are: $supported_defaults" 2>&1
3712 t="{ \"$option\", \"$val\" }"
3714 t="${t}, { \"$option\", \"$val\" }"
3721 configure_default_options="{ { NULL, NULL} }"
3723 configure_default_options="{ ${t} }"
3726 if test "$target_cpu_default2" != ""
3728 if test "$target_cpu_default" != ""
3730 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3732 target_cpu_default=$target_cpu_default2