gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 2, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING.  If not, write to the Free
  19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
  20 #02110-1301, USA.
  21
  22 # This is the GCC target-specific configuration file
  23 # where a configuration type is mapped to different system-specific
  24 # definitions and files.  This is invoked by the autoconf-generated
  25 # configure script.  Putting it in a separate shell file lets us skip
  26 # running autoconf when modifying target-specific information.
  27
  28 # When you change the cases in the OS or target switches, consider
  29 # updating ../libgcc/config.host also.
  30
  31 # This file switches on the shell variable ${target}, and also uses the
  32 # following shell variables:
  33 #
  34 #  with_*               Various variables as set by configure.
  35 #
  36 #  enable_threads       Either the name, yes or no depending on whether
  37 #                       threads support was requested.
  38 #
  39 #  default_use_cxa_atexit
  40 #                         The default value for the $enable___cxa_atexit
  41 #                       variable.  enable___cxa_atexit needs to be set to
  42 #                       "yes" for the correct operation of C++ destructors
  43 #                       but it relies upon the presence of a non-standard C
  44 #                       library function called __cxa_atexit.
  45 #                         Since not all C libraries provide __cxa_atexit the
  46 #                       default value of $default_use_cxa_atexit is set to
  47 #                       "no" except for targets which are known to be OK.
  48 #
  49 #  gas_flag             Either yes or no depending on whether GNU as was
  50 #                       requested.
  51 #
  52 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  53 #                       requested.
  54
  55 # This file sets the following shell variables for use by the
  56 # autoconf-generated configure script:
  57 #
  58 #  cpu_type             The name of the cpu, if different from the first
  59 #                       chunk of the canonical target name.
  60 #
  61 #  tm_defines           List of target macros to define for all compilations.
  62 #
  63 #  tm_file              A list of target macro files, if different from
  64 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  65 #                       per target in a way like this:
  66 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  67 #                       Note that the preferred order is:
  68 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  69 #                       - generic headers like dbxelf.h elfos.h, etc.
  70 #                       - specializing target headers like ${cpu_type.h}/elf.h
  71 #                       This helps to keep OS specific stuff out of the CPU
  72 #                       defining header ${cpu_type}/${cpu_type.h}.
  73 #
  74 #  tm_p_file            Location of file with declarations for functions
  75 #                       in $out_file.
  76 #
  77 #  out_file             The name of the machine description C support
  78 #                       file, if different from "$cpu_type/$cpu_type.c".
  79 #
  80 #  md_file              The name of the machine-description file, if
  81 #                       different from "$cpu_type/$cpu_type.md".
  82 #
  83 #  tmake_file           A list of machine-description-specific
  84 #                       makefile-fragments, if different from
  85 #                       "$cpu_type/t-$cpu_type".
  86 #
  87 #  extra_modes          The name of the file containing a list of extra
  88 #                       machine modes, if necessary and different from
  89 #                       "$cpu_type/$cpu_type-modes.def".
  90 #
  91 #  extra_objs           List of extra objects that should be linked into
  92 #                       the compiler proper (cc1, cc1obj, cc1plus)
  93 #                       depending on target.
  94 #
  95 #  extra_gcc_objs       List of extra objects that should be linked into
  96 #                       the compiler driver (gcc) depending on target.
  97 #
  98 #  extra_headers        List of used header files from the directory
  99 #                       config/${cpu_type}.
 100 #
 101 #  extra_passes         List of extra executables compiled for this target
 102 #                       machine, used for compiling from source to object.
 103 #
 104 #  extra_parts          List of extra object files that should be compiled
 105 #                       for this target machine.
 106 #
 107 #  extra_programs       Like extra_passes, but these are used when linking.
 108 #
 109 #  extra_options        List of target-dependent .opt files.
 110 #
 111 #  c_target_objs        List of extra target-dependent objects that be
 112 #                       linked into the C compiler only.
 113 #
 114 #  cxx_target_objs      List of extra target-dependent objects that be
 115 #                       linked into the C++ compiler only.
 116 #
 117 #  target_gtfiles       List of extra source files with type information.
 118 #
 119 #  xm_defines           List of macros to define when compiling for the
 120 #                       target machine.
 121 #
 122 #  xm_file              List of files to include when compiling for the
 123 #                       target machine.
 124 #
 125 #  use_collect2         Set to yes or no, depending on whether collect2
 126 #                       will be used.
 127 #
 128 #  target_cpu_default   Set to override the default target model.
 129 #
 130 #  gdb_needs_out_file_path
 131 #                       Set to yes if gdb needs a dir command with
 132 #                       `dirname $out_file`.
 133 #
 134 #  thread_file          Set to control which thread package to use.
 135 #
 136 #  gas                  Set to yes or no depending on whether the target
 137 #                       system normally uses GNU as.
 138 #
 139 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 140 #                       for this target.  This is true iff this target
 141 #                       supports "long" or "wchar_t" wider than 32 bits.
 142 #
 143 #  configure_default_options
 144 #                       Set to an initializer for configure_default_options
 145 #                       in configargs.h, based on --with-cpu et cetera.
 146 #
 147 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 148 #                       "no" if fixproto should never be run.
 149
 150 # The following variables are used in each case-construct to build up the
 151 # outgoing variables:
 152 #
 153 #  gnu_ld               Set to yes or no depending on whether the target
 154 #                       system normally uses GNU ld.
 155
 156 out_file=
 157 tmake_file=
 158 extra_headers=
 159 extra_passes=
 160 extra_parts=
 161 extra_programs=
 162 extra_objs=
 163 extra_gcc_objs=
 164 extra_options=
 165 c_target_objs=
 166 cxx_target_objs=
 167 tm_defines=
 168 xm_defines=
 169 # Set this to force installation and use of collect2.
 170 use_collect2=
 171 # Set this to override the default target model.
 172 target_cpu_default=
 173 # Set this if gdb needs a dir command with `dirname $out_file`
 174 gdb_needs_out_file_path=
 175 # Set this to control which thread package will be used.
 176 thread_file=
 177 # Reinitialize these from the flag values every loop pass, since some
 178 # configure entries modify them.
 179 gas="$gas_flag"
 180 gnu_ld="$gnu_ld_flag"
 181 default_use_cxa_atexit=no
 182 target_gtfiles=
 183 need_64bit_hwint=
 184
 185 # Default to not using fixproto.  Targets which need fixproto should
 186 # specifically set this to 'yes'.
 187 use_fixproto=no
 188
 189 # Don't carry these over build->host->target.  Please.
 190 xm_file=
 191 md_file=
 192
 193 # Obsolete configurations.
 194 case ${target} in
 195    c4x-*                \
 196  | tic4x-*              \
 197  )
 198     if test "x$enable_obsolete" != xyes; then
 199       echo "*** Configuration ${target} is obsolete." >&2
 200       echo "*** Specify --enable-obsolete to build it anyway." >&2
 201       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 202       echo "*** unless a maintainer comes forward." >&2
 203       exit 1
 204     fi;;
 205 esac
 206
 207 # Unsupported targets list.  Do not put an entry in this list unless
 208 # it would otherwise be caught by a more permissive pattern.  The list
 209 # should be in alphabetical order.
 210 case ${target} in
 211    alpha*-*-linux*libc1*                \
 212  | i[34567]86-sequent-sysv              \
 213  | i[34567]86-sequent-sysv[123]*        \
 214  | i[34567]86-go32-*                    \
 215  | i[34567]86-*-go32*                   \
 216  | m68k-*-linux*aout*                   \
 217  | m68k-*-linux*libc1*                  \
 218  | mips64orion*-*-rtems*                \
 219  | powerpc-*-linux*libc1*               \
 220  | sparc-*-linux*aout*                  \
 221  | sparc-*-linux*libc1*                 \
 222  | sparc-hal-solaris2*                  \
 223  | thumb-*-*                            \
 224  | *-*-linux*coff*                      \
 225  | *-*-linux*oldld*                     \
 226  | *-*-rtemsaout*                       \
 227  | *-*-rtemscoff*                       \
 228  | vax-*-vms*                           \
 229  )
 230         echo "*** Configuration ${target} not supported" 1>&2
 231         exit 1
 232         ;;
 233 esac
 234
 235 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 236 # updated in each machine entry.  Also set default extra_headers for some
 237 # machines.
 238 tm_p_file=
 239 cpu_type=`echo ${target} | sed 's/-.*$//'`
 240 cpu_is_64bit=
 241 case ${target} in
 242 m32c*-*-*)
 243         cpu_type=m32c
 244         tmake_file=m32c/t-m32c
 245         ;;
 246 alpha*-*-*)
 247         cpu_type=alpha
 248         need_64bit_hwint=yes
 249         ;;
 250 am33_2.0-*-linux*)
 251         cpu_type=mn10300
 252         ;;
 253 strongarm*-*-*)
 254         cpu_type=arm
 255         ;;
 256 arm*-*-*)
 257         cpu_type=arm
 258         extra_headers="mmintrin.h"
 259         ;;
 260 bfin*-*)
 261         cpu_type=bfin
 262         ;;
 263 ep9312*-*-*)
 264         cpu_type=arm
 265         ;;
 266 frv*)   cpu_type=frv
 267         ;;
 268 xscale-*-*)
 269         cpu_type=arm
 270         extra_headers="mmintrin.h"
 271         ;;
 272 i[34567]86-*-*)
 273         cpu_type=i386
 274         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 275                        pmmintrin.h tmmintrin.h"
 276         ;;
 277 x86_64-*-*)
 278         cpu_type=i386
 279         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 280                        pmmintrin.h tmmintrin.h"
 281         need_64bit_hwint=yes
 282         ;;
 283 ia64-*-*)
 284         extra_headers=ia64intrin.h
 285         need_64bit_hwint=yes
 286         ;;
 287 hppa*-*-* | parisc*-*-*)
 288         cpu_type=pa
 289         ;;
 290 m32r*-*-*)
 291         cpu_type=m32r
 292         ;;
 293 m680[012]0-*-*)
 294         cpu_type=m68k
 295         extra_headers=math-68881.h
 296         ;;
 297 m68k-*-*)
 298         extra_headers=math-68881.h
 299         ;;
 300 mips*-*-*)
 301         cpu_type=mips
 302         need_64bit_hwint=yes
 303         ;;
 304 powerpc*-*-*)
 305         cpu_type=rs6000
 306         extra_headers="ppc-asm.h altivec.h spe.h"
 307         need_64bit_hwint=yes
 308         case x$with_cpu in
 309             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
 310                 cpu_is_64bit=yes
 311                 ;;
 312         esac
 313         ;;
 314 rs6000*-*-*)
 315         need_64bit_hwint=yes
 316         ;;
 317 score*-*-*)
 318         cpu_type=score
 319         ;;
 320 sparc64*-*-*)
 321         cpu_type=sparc
 322         need_64bit_hwint=yes
 323         ;;
 324 sparc*-*-*)
 325         cpu_type=sparc
 326         ;;
 327 spu*-*-*)
 328         cpu_type=spu
 329         need_64bit_hwint=yes
 330         ;;
 331 s390*-*-*)
 332         cpu_type=s390
 333         need_64bit_hwint=yes
 334         ;;
 335 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 336 sh[123456789lbe]*-*-*)
 337         cpu_type=sh
 338         need_64bit_hwint=yes
 339         ;;
 340 tic4x-*-*)
 341         cpu_type=c4x
 342         ;;
 343 esac
 344
 345 tm_file=${cpu_type}/${cpu_type}.h
 346 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 347 then
 348         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 349 fi
 350 extra_modes=
 351 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 352 then
 353         extra_modes=${cpu_type}/${cpu_type}-modes.def
 354 fi
 355 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 356 then
 357         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 358 fi
 359
 360 case ${target} in
 361 x86_64-*-*)
 362         tm_file="i386/biarch64.h ${tm_file}"
 363         ;;
 364 esac
 365
 366 # On a.out targets, we need to use collect2.
 367 case ${target} in
 368 *-*-*aout*)
 369         use_collect2=yes
 370         ;;
 371 esac
 372
 373 # Common parts for widely ported systems.
 374 case ${target} in
 375 *-*-darwin*)
 376   tm_file="${tm_file} darwin.h"
 377   case ${target} in
 378   *-*-darwin9*)
 379     tm_file="${tm_file} darwin9.h"
 380     ;;
 381   esac
 382   tm_file="${tm_file} ${cpu_type}/darwin.h"
 383   tm_p_file="${tm_p_file} darwin-protos.h"
 384   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 385   target_gtfiles="\$(srcdir)/config/darwin.c"
 386   extra_options="${extra_options} darwin.opt"
 387   c_target_objs="darwin-c.o"
 388   cxx_target_objs="darwin-c.o"
 389   extra_objs="darwin.o"
 390   default_use_cxa_atexit=yes
 391   case ${enable_threads} in
 392     "" | yes | posix) thread_file='posix' ;;
 393   esac
 394   ;;
 395 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 396   # This is the place-holder for the generic a.out configuration
 397   # of FreeBSD.  No actual configuration resides here since
 398   # there was only ever a bare-bones ix86 configuration for
 399   # a.out and it exists solely in the machine-specific section.
 400   # This place-holder must exist to avoid dropping into
 401   # the generic ELF configuration of FreeBSD (i.e. it must be
 402   # ordered before that section).
 403   ;;
 404 *-*-freebsd*)
 405   # This is the generic ELF configuration of FreeBSD.  Later
 406   # machine-specific sections may refine and add to this
 407   # configuration.
 408   #
 409   # Due to tm_file entry ordering issues that vary between cpu
 410   # architectures, we only define fbsd_tm_file to allow the
 411   # machine-specific section to dictate the final order of all
 412   # entries of tm_file with the minor exception that components
 413   # of the tm_file set here will always be of the form:
 414   #
 415   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 416   #
 417   # The machine-specific section should not tamper with this
 418   # ordering but may order all other entries of tm_file as it
 419   # pleases around the provided core setting.
 420   gas=yes
 421   gnu_ld=yes
 422   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 423   case ${target} in
 424     *-*-freebsd3 | *-*-freebsd[3].*)
 425       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 426     *-*-freebsd4 | *-*-freebsd[4].*)
 427       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 428     *-*-freebsd5 | *-*-freebsd[5].*)
 429       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 430     *-*-freebsd6 | *-*-freebsd[6].*)
 431       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 432     *-*-freebsd7 | *-*-freebsd[7].*)
 433       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
 434     *-*-freebsd8 | *-*-freebsd[8].*)
 435       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
 436     *-*-freebsd9 | *-*-freebsd[9].*)
 437       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
 438     *)
 439       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 440       exit 1
 441       ;;
 442   esac
 443   tmake_file="t-slibgcc-elf-ver t-freebsd"
 444   case ${enable_threads} in
 445     no)
 446       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 447       ;;
 448     "" | yes | posix)
 449       thread_file='posix'
 450       tmake_file="${tmake_file} t-freebsd-thread"
 451       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 452       # when "optionally" threaded via weak pthread_* checks.
 453       case ${target} in
 454         *-*-freebsd[34] | *-*-freebsd[34].*)
 455           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 456           ;;
 457       esac
 458       ;;
 459     *)
 460       echo 'Unknown thread configuration for FreeBSD'
 461       exit 1
 462       ;;
 463   esac
 464   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 465   ;;
 466 *-*-linux*libc1* | *-*-linux*aout*)
 467   # Avoid the generic linux case.
 468   ;;
 469 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 470   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 471   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 472   extra_options="${extra_options} linux.opt"
 473   gas=yes
 474   gnu_ld=yes
 475   case ${enable_threads} in
 476     "" | yes | posix) thread_file='posix' ;;
 477   esac
 478   tmake_file="t-slibgcc-elf-ver t-linux"
 479   case ${target} in
 480     *-*-*uclibc*)
 481       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 482       ;;
 483     *)
 484       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 485       ;;
 486   esac
 487   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 488   default_use_cxa_atexit=yes
 489   ;;
 490 *-*-gnu*)
 491   # On the Hurd, the setup is just about the same on
 492   # each different CPU.  The specific machines that we
 493   # support are matched above and just set $cpu_type.
 494   tm_file="${cpu_type}/gnu.h"
 495   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 496   # GNU tools are the only tools.
 497   gas=yes
 498   gnu_ld=yes
 499   # These details are the same as for Linux.
 500   # But here we need a little extra magic.
 501   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 502   case ${target} in
 503     alpha*)
 504       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 505       ;;
 506     i[34567]86-*-*)
 507       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 508       ;;
 509   esac
 510   # Assume that glibc is being used and so __cxa_atexit is provided.
 511   default_use_cxa_atexit=yes
 512   ;;
 513 *-*-netbsd*)
 514   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 515   gas=yes
 516   gnu_ld=yes
 517
 518   # NetBSD 2.0 and later get POSIX threads enabled by default.
 519   # Allow them to be explicitly enabled on any other version.
 520   case ${enable_threads} in
 521     "")
 522       case ${target} in
 523         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 524           thread_file='posix'
 525           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 526           ;;
 527       esac
 528       ;;
 529     yes | posix)
 530       thread_file='posix'
 531       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 532       ;;
 533   esac
 534
 535   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 536   # ELF configurations.  We will clear extra_parts in the
 537   # a.out configurations.
 538   case ${target} in
 539     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 540       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 541       ;;
 542   esac
 543
 544   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 545   # default (unless overridden by --disable-__cxa_atexit).
 546   case ${target} in
 547     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 548       default_use_cxa_atexit=yes
 549       ;;
 550   esac
 551   ;;
 552 *-*-openbsd*)
 553   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 554   case ${enable_threads} in
 555     yes)
 556       thread_file='posix'
 557       tmake_file="${tmake_file} t-openbsd-thread"
 558       ;;
 559   esac
 560   case ${target} in
 561     *-*-openbsd2.*|*-*-openbsd3.[012])
 562       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 563   esac
 564   ;;
 565 *-*-rtems*)
 566   case ${enable_threads} in
 567     yes) thread_file='rtems' ;;
 568   esac
 569   ;;
 570 *-*-vxworks*)
 571   tmake_file=t-vxworks
 572   tm_file="${tm_file} elfos.h svr4.h"
 573   xm_defines=POSIX
 574   extra_options="${extra_options} vxworks.opt"
 575   case ${enable_threads} in
 576     no) ;;
 577     "" | yes | vxworks) thread_file='vxworks' ;;
 578     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 579   esac
 580   ;;
 581 *-*-elf)
 582   # Assume that newlib is being used and so __cxa_atexit is provided.
 583   default_use_cxa_atexit=yes
 584   ;;
 585 esac
 586
 587 case ${target} in
 588 # Support site-specific machine types.
 589 *local*)
 590         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 591         tm_file=${cpu_type}/$rest.h
 592         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 593         then xm_file=${cpu_type}/xm-$rest.h
 594         fi
 595         if test -f $srcdir/config/${cpu_type}/t-$rest
 596         then tmake_file=${cpu_type}/t-$rest
 597         fi
 598         ;;
 599 alpha*-*-unicosmk*)
 600         use_collect2=yes
 601         tm_file="${tm_file} alpha/unicosmk.h"
 602
 603         # Don't include t-ieee for now because we don't support that yet
 604         # tmake_file="alpha/t-ieee"
 605         tmake_file="alpha/t-unicosmk"
 606         use_fixproto=yes
 607         ;;
 608 alpha*-*-linux*)
 609         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 610         target_cpu_default="MASK_GAS"
 611         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 612         ;;
 613 alpha*-*-gnu*)
 614         target_cpu_default="MASK_GAS"
 615         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 616         ;;
 617 alpha*-*-freebsd*)
 618         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 619         target_cpu_default="MASK_GAS"
 620         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 621         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 622         ;;
 623 alpha*-*-netbsd*)
 624         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 625         target_cpu_default="MASK_GAS"
 626         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 627         ;;
 628 alpha*-*-openbsd*)
 629         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 630         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 631         # default x-alpha is only appropriate for dec-osf.
 632         target_cpu_default="MASK_GAS"
 633         tmake_file="alpha/t-alpha alpha/t-ieee"
 634         ;;
 635 alpha*-dec-osf[45]*)
 636         if test x$stabs = xyes
 637         then
 638                 tm_file="${tm_file} dbx.h"
 639         fi
 640         if test x$gas != xyes
 641         then
 642                 extra_passes="mips-tfile mips-tdump"
 643         fi
 644         use_collect2=yes
 645         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 646         tm_file="${tm_file} alpha/osf.h"
 647         extra_headers=va_list.h
 648         case ${target} in
 649           *-*-osf4*)
 650             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 651             case ${target} in
 652                 *-*-osf4.0a) ;;
 653                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 654             esac
 655             ;;
 656           *-*-osf5*)
 657             tm_file="${tm_file} alpha/osf5.h"
 658             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 659             ;;
 660         esac
 661         case ${enable_threads} in
 662           "" | yes | posix)
 663             thread_file='posix'
 664             tmake_file="${tmake_file} alpha/t-osf-pthread"
 665             ;;
 666         esac
 667         ;;
 668 alpha64-dec-*vms*)
 669         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 670         xm_file="alpha/xm-vms.h"
 671         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 672         prefix=/gnu
 673         local_prefix=/gnu
 674         ;;
 675 alpha*-dec-*vms*)
 676         tm_file="${tm_file} alpha/vms.h"
 677         xm_file=alpha/xm-vms.h
 678         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 679         prefix=/gnu
 680         local_prefix=/gnu
 681         ;;
 682 arc-*-elf*)
 683         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 684         extra_parts="crtinit.o crtfini.o"
 685         use_fixproto=yes
 686         ;;
 687 arm-*-coff* | armel-*-coff*)
 688         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 689         tmake_file="arm/t-arm arm/t-arm-coff"
 690         ;;
 691 arm-semi-aof | armel-semi-aof)
 692         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 693         tmake_file="arm/t-arm arm/t-semi"
 694         ;;
 695 arm-wrs-vxworks)
 696         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
 697         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 698         ;;
 699 arm*-*-freebsd*|strongarm*-*-freebsd*)
 700         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 701         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 702         ;;
 703 arm*-*-netbsdelf*)
 704         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 705         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 706         ;;
 707 arm*-*-netbsd*)
 708         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 709         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 710         extra_parts=""
 711         use_collect2=yes
 712         ;;
 713 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 714         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 715         tmake_file="${tmake_file} t-linux arm/t-arm"
 716         case ${target} in
 717         arm*-*-linux-*eabi)
 718             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 719             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 720             # The BPABI long long divmod functions return a 128-bit value in
 721             # registers r0-r3.  Correctly modeling that requires the use of
 722             # TImode.
 723             need_64bit_hwint=yes
 724             # The EABI requires the use of __cxa_atexit.
 725             default_use_cxa_atexit=yes
 726             ;;
 727         *)
 728             tmake_file="$tmake_file arm/t-linux"
 729             ;;
 730         esac
 731         tm_file="$tm_file arm/aout.h arm/arm.h"
 732         ;;
 733 arm*-*-uclinux*)                # ARM ucLinux
 734         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
 735         tmake_file="arm/t-arm arm/t-arm-elf"
 736         ;;
 737 arm*-*-ecos-elf)
 738         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 739         tmake_file="arm/t-arm arm/t-arm-elf"
 740         ;;
 741 arm*-*-eabi* | arm*-*-symbianelf* )
 742         # The BPABI long long divmod functions return a 128-bit value in
 743         # registers r0-r3.  Correctly modeling that requires the use of
 744         # TImode.
 745         need_64bit_hwint=yes
 746         default_use_cxa_atexit=yes
 747         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 748         tmake_file="arm/t-arm arm/t-arm-elf"
 749         case ${target} in
 750         arm*-*-eabi*)
 751           tmake_file="${tmake_file} arm/t-bpabi"
 752           ;;
 753         arm*-*-symbianelf*)
 754           tm_file="${tm_file} arm/symbian.h"
 755           # We do not include t-bpabi for Symbian OS because the system
 756           # provides its own implementation of the BPABI functions.
 757           tmake_file="${tmake_file} arm/t-symbian"
 758           ;;
 759         esac
 760         tm_file="${tm_file} arm/aout.h arm/arm.h"
 761         ;;
 762 arm*-*-rtems*)
 763         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 764         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 765         ;;
 766 arm*-*-elf | ep9312-*-elf)
 767         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 768         tmake_file="arm/t-arm arm/t-arm-elf"
 769         ;;
 770 arm*-wince-pe*)
 771         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 772         tmake_file="arm/t-arm arm/t-wince-pe"
 773         extra_options="${extra_options} arm/pe.opt"
 774         extra_objs="pe.o"
 775         ;;
 776 arm-*-pe*)
 777         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 778         tmake_file="arm/t-arm arm/t-pe"
 779         extra_options="${extra_options} arm/pe.opt"
 780         extra_objs="pe.o"
 781         ;;
 782 arm*-*-kaos*)
 783         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 784         tmake_file="arm/t-arm arm/t-arm-elf"
 785         ;;
 786 avr-*-rtems*)
 787         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 788         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 789         ;;
 790 avr-*-*)
 791         tm_file="avr/avr.h dbxelf.h"
 792         use_fixproto=yes
 793         ;;
 794 bfin*-elf*)
 795         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 796         tmake_file=bfin/t-bfin-elf
 797         use_collect2=no
 798         ;;
 799 bfin*-uclinux*)
 800         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
 801         tmake_file=bfin/t-bfin-elf
 802         use_collect2=no
 803         ;;
 804 bfin*-rtems*)
 805         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
 806         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
 807         ;;
 808 bfin*-*)
 809         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 810         tmake_file=bfin/t-bfin
 811         use_collect2=no
 812         ;;
 813 c4x-*-rtems* | tic4x-*-rtems*)
 814         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
 815         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 816         c_target_objs="c4x-c.o"
 817         cxx_target_objs="c4x-c.o"
 818         ;;
 819 c4x-* | tic4x-*)
 820         tmake_file=c4x/t-c4x
 821         c_target_objs="c4x-c.o"
 822         cxx_target_objs="c4x-c.o"
 823         ;;
 824 cris-*-aout)
 825         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 826         gas=yes
 827         tmake_file="cris/t-cris cris/t-aout"
 828         extra_options="${extra_options} cris/aout.opt"
 829         ;;
 830 cris-*-elf | cris-*-none)
 831         tm_file="dbxelf.h elfos.h ${tm_file}"
 832         tmake_file="cris/t-cris cris/t-elfmulti"
 833         gas=yes
 834         extra_options="${extra_options} cris/elf.opt"
 835         ;;
 836 cris-*-linux*)
 837         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 838         # We need to avoid using t-linux, so override default tmake_file
 839         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 840         extra_options="${extra_options} cris/linux.opt"
 841         ;;
 842 crx-*-elf)
 843         tm_file="elfos.h ${tm_file}"
 844         extra_parts="crtbegin.o crtend.o"
 845         use_collect2=no
 846         ;;
 847 fr30-*-elf)
 848         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 849         tmake_file=fr30/t-fr30
 850         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 851         use_fixproto=yes
 852         ;;
 853 frv-*-elf)
 854         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 855         tmake_file=frv/t-frv
 856         use_fixproto=yes
 857         ;;
 858 frv-*-*linux*)
 859         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 860                  linux.h frv/linux.h frv/frv-abi.h"
 861         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 862         ;;
 863 h8300-*-rtemscoff*)
 864         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
 865         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 866         ;;
 867 h8300-*-rtems*)
 868         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 869         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 870         ;;
 871 h8300-*-elf*)
 872         tmake_file="h8300/t-h8300 h8300/t-elf"
 873         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 874         use_fixproto=yes
 875         ;;
 876 h8300-*-*)
 877         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 878         use_fixproto=yes
 879         ;;
 880 hppa*64*-*-linux* | parisc*64*-*-linux*)
 881         target_cpu_default="MASK_PA_11|MASK_PA_20"
 882         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 883                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 884         tmake_file="${tmake_file} pa/t-linux64"
 885         gas=yes gnu_ld=yes
 886         need_64bit_hwint=yes
 887         ;;
 888 hppa*-*-linux* | parisc*-*-linux*)
 889         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 890         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 891                  pa/pa32-regs.h pa/pa32-linux.h"
 892         tmake_file="${tmake_file} pa/t-linux"
 893         # Set the libgcc version number
 894         if test x$sjlj = x1; then
 895             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 896         else
 897             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 898         fi
 899         ;;
 900 # port not yet contributed.
 901 #hppa*-*-openbsd*)
 902 #       target_cpu_default="MASK_PA_11"
 903 #       ;;
 904 hppa1.1-*-pro*)
 905         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 906         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 907                  pa/pa-pro-end.h libgloss.h"
 908         tmake_file="pa/t-pro"
 909         ;;
 910 hppa1.1-*-osf*)
 911         target_cpu_default="MASK_PA_11"
 912         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 913         tmake_file="pa/t-pa"
 914         use_collect2=yes
 915         ;;
 916 hppa1.1-*-bsd*)
 917         target_cpu_default="MASK_PA_11"
 918         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 919         tmake_file="pa/t-pa"
 920         use_collect2=yes
 921         ;;
 922 hppa[12]*-*-hpux10*)
 923         case ${target} in
 924         hppa1.1-*-* | hppa2*-*-*)
 925                 target_cpu_default="MASK_PA_11"
 926                 ;;
 927         esac
 928         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 929                  pa/pa-hpux.h pa/pa-hpux10.h"
 930         extra_options="${extra_options} pa/pa-hpux.opt"
 931         case ${target} in
 932         *-*-hpux10.[1-9]*)
 933                 tm_file="${tm_file} pa/pa-hpux1010.h"
 934                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 935                 ;;
 936         esac
 937         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 938         case ${enable_threads} in
 939           "")
 940             if test x$have_pthread_h = xyes ; then
 941               tmake_file="${tmake_file} pa/t-dce-thr"
 942             fi
 943             ;;
 944           yes | dce)
 945             tmake_file="${tmake_file} pa/t-dce-thr"
 946             ;;
 947         esac
 948         # Set the libgcc version number
 949         if test x$sjlj = x1; then
 950             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 951         else
 952             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 953         fi
 954         use_collect2=yes
 955         use_fixproto=yes
 956         gas=yes
 957         ;;
 958 hppa*64*-*-hpux11*)
 959         target_cpu_default="MASK_PA_11|MASK_PA_20"
 960         if test x$gnu_ld = xyes
 961         then
 962                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 963         fi
 964         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 965                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 966                  pa/pa-hpux11.h"
 967         case ${target} in
 968         *-*-hpux11.[1-9]*)
 969                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 970                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 971                 ;;
 972         *)
 973                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 974                 ;;
 975         esac
 976         extra_options="${extra_options} pa/pa-hpux.opt \
 977                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
 978         need_64bit_hwint=yes
 979         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
 980         # Set the libgcc version number
 981         if test x$sjlj = x1; then
 982             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 983         else
 984             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 985         fi
 986         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
 987                      libgcc_stub.a"
 988         case x${enable_threads} in
 989         x | xyes | xposix )
 990                 thread_file=posix
 991                 ;;
 992         esac
 993         gas=yes
 994         ;;
 995 hppa[12]*-*-hpux11*)
 996         case ${target} in
 997         hppa1.1-*-* | hppa2*-*-*)
 998                 target_cpu_default="MASK_PA_11"
 999                 ;;
1000         esac
1001         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1002                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1003         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1004         case ${target} in
1005         *-*-hpux11.[1-9]*)
1006                 tm_file="${tm_file} pa/pa-hpux1111.h"
1007                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1008                 ;;
1009         esac
1010         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1011         # Set the libgcc version number
1012         if test x$sjlj = x1; then
1013             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1014         else
1015             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1016         fi
1017         case x${enable_threads} in
1018         x | xyes | xposix )
1019                 thread_file=posix
1020                 ;;
1021         esac
1022         use_collect2=yes
1023         gas=yes
1024         ;;
1025 i[34567]86-*-darwin*)
1026         need_64bit_hwint=yes
1027
1028         # This is so that '.../configure && make' doesn't fail due to
1029         # config.guess deciding that the configuration is i386-*-darwin* and
1030         # then this file using that to set --with-cpu=i386 which has no -m64
1031         # support.
1032         with_arch=${with_arch:-nocona}
1033         with_cpu=${with_cpu:-generic}
1034         ;;
1035 x86_64-*-darwin*)
1036         with_arch=${with_arch:-nocona}
1037         with_cpu=${with_cpu:-generic}
1038         tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
1039         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1040         ;;
1041 i[34567]86-*-elf*)
1042         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1043         tmake_file="i386/t-i386elf t-svr4"
1044         use_fixproto=yes
1045         ;;
1046 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1047         if test x$gas = xyes
1048         then
1049                 tm_file="${tm_file} usegas.h"
1050         fi
1051         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1052         tmake_file=t-svr4
1053         extra_parts="crtbegin.o crtend.o"
1054         use_fixproto=yes
1055         ;;
1056 i[34567]86-*-aout*)
1057         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1058         use_fixproto=yes
1059         ;;
1060 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1061         tmake_file='i386/t-beos i386/t-crtpic'
1062         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1063         extra_parts='crtbegin.o crtend.o'
1064         ;;
1065 i[34567]86-*-freebsd*)
1066         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1067         ;;
1068 x86_64-*-freebsd*)
1069         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1070         ;;
1071 i[34567]86-*-netbsdelf*)
1072         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1073         ;;
1074 i[34567]86-*-netbsd*)
1075         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1076         tmake_file=t-netbsd
1077         extra_parts=""
1078         use_collect2=yes
1079         ;;
1080 x86_64-*-netbsd*)
1081         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1082         ;;
1083 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1084         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1085         # needed to unconfuse gdb
1086         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1087         # we need collect2 until our bug is fixed...
1088         use_collect2=yes
1089         ;;
1090 i[34567]86-*-openbsd*)
1091         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1092         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1093         gas=yes
1094         gnu_ld=yes
1095         ;;
1096 i[34567]86-*-coff*)
1097         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1098         use_fixproto=yes
1099         ;;
1100 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1101                         # Intel 80386's running GNU/*
1102                         # with ELF format using glibc 2
1103         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1104         case ${target} in
1105         i[34567]86-*-linux*)
1106                 if test x$enable_targets = xall; then
1107                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1108                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1109                         tmake_file="${tmake_file} i386/t-linux64"
1110                         need_64bit_hwint=yes
1111                         # FIXME: -m64 for i[34567]86-*-* should be allowed just
1112                         # like -m32 for x86_64-*-*.
1113                         case X"${with_cpu}" in
1114                         Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1115                                 ;;
1116                         X)
1117                                 with_cpu=generic
1118                                 ;;
1119                         *)
1120                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1121                                 echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1122                                 exit 1
1123                                 ;;
1124                         esac
1125                 else
1126                         tm_file="${tm_file} i386/linux.h"
1127                 fi
1128                 ;;
1129         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1130         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1131         esac
1132         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
1133         ;;
1134 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1135         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1136                  i386/x86-64.h i386/linux64.h"
1137         case ${target} in
1138         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1139         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1140         esac
1141         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
1142         ;;
1143 i[34567]86-*-gnu*)
1144         ;;
1145 i[34567]86-pc-msdosdjgpp*)
1146         xm_file=i386/xm-djgpp.h
1147         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1148         tmake_file=i386/t-djgpp
1149         extra_options="${extra_options} i386/djgpp.opt"
1150         gnu_ld=yes
1151         gas=yes
1152         ;;
1153 i[34567]86-*-lynxos*)
1154         xm_defines=POSIX
1155         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1156         tmake_file="i386/t-crtstuff t-lynx"
1157         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1158         extra_options="${extra_options} lynx.opt"
1159         thread_file=lynx
1160         gnu_ld=yes
1161         gas=yes
1162         ;;
1163 i[3456x]86-*-netware*)
1164         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1165         tmake_file=i386/t-netware
1166         extra_objs=netware.o
1167         case /${with_ld} in
1168         */nwld)
1169                 extra_objs="$extra_objs nwld.o"
1170                 tm_file="${tm_file} i386/nwld.h"
1171                 tmake_file="${tmake_file} i386/t-nwld"
1172                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1173                 ;;
1174         esac
1175         case x${enable_threads} in
1176         x | xyes | xposix) thread_file='posix';;
1177         xnks) thread_file='nks';;
1178         xno) ;;
1179         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1180         esac
1181         ;;
1182 i[34567]86-*-nto-qnx*)
1183         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1184         tmake_file=i386/t-nto
1185         gnu_ld=yes
1186         gas=yes
1187         ;;
1188 i[34567]86-*-rtems*)
1189         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1190         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1191         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1192         ;;
1193 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1194         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1195         if test x$gas = xyes
1196         then
1197                 tm_file="usegas.h ${tm_file}"
1198         fi
1199         tmake_file=i386/t-sco5
1200         extra_parts="crtbegin.o crtend.o"
1201         extra_options="${extra_options} i386/sco5.opt"
1202         use_fixproto=yes
1203         ;;
1204 i[34567]86-*-solaris2*)
1205         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1206         case ${target} in
1207         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1208                 tm_file="${tm_file} sol2-6.h"
1209                 ;;
1210         *-*-solaris2.1[0-9]*)
1211                 tm_file="${tm_file} sol2-10.h"
1212                 ;;
1213         esac
1214         tm_file="${tm_file} i386/sol2.h"
1215         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1216         c_target_objs="sol2-c.o"
1217         cxx_target_objs="sol2-c.o"
1218         extra_objs="sol2.o"
1219         tm_p_file="${tm_p_file} sol2-protos.h"
1220         if test x$gnu_ld = xyes; then
1221                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1222                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1223         else
1224                 tmake_file="$tmake_file t-slibgcc-sld"
1225         fi
1226         if test x$gas = xyes; then
1227                 tm_file="usegas.h ${tm_file}"
1228         fi
1229         case ${target} in
1230         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1231                 tm_file="$tm_file tm-dwarf2.h"
1232                 ;;
1233         esac
1234         case ${target} in
1235         *-*-solaris2.1[0-9]*)
1236                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1237                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1238                 tmake_file="$tmake_file i386/t-sol2-10"
1239                 need_64bit_hwint=yes
1240                 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1241                 # like -m32 for x86_64-*-*.
1242                 case X"${with_cpu}" in
1243                 Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1244                         ;;
1245                 X)
1246                         with_cpu=generic
1247                         ;;
1248                 *)
1249                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1250                         echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1251                         exit 1
1252                         ;;
1253                 esac
1254                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1255                 # part of the base system.
1256                 extra_parts="gmon.o crtbegin.o crtend.o"
1257                 ;;
1258         *)
1259                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1260                 ;;
1261         esac
1262         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1263           "":yes:* | yes:yes:* )
1264                 case ${target} in
1265                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1266                         thread_file=posix95
1267                         ;;
1268                   *)
1269                         thread_file=posix
1270                         ;;
1271                 esac
1272                 ;;
1273           "":*:yes | yes:*:yes )
1274                 thread_file=solaris
1275                 ;;
1276         esac
1277         ;;
1278 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1279        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1280        if test x$stabs = xyes
1281        then
1282                tm_file="${tm_file} dbx.h"
1283        fi
1284        tmake_file="i386/t-crtpic t-svr4"
1285        extra_parts="crtbegin.o crtend.o"
1286        if test x$enable_threads = xyes; then
1287                thread_file='posix'
1288        fi
1289         use_fixproto=yes
1290        ;;
1291 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1292         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1293         if test x$stabs = xyes
1294         then
1295                 tm_file="${tm_file} dbx.h"
1296         fi
1297         tmake_file="i386/t-crtpic t-svr4"
1298         extra_parts="crtbegin.o crtend.o"
1299         use_fixproto=yes
1300         ;;
1301 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1302         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1303         case ${target} in
1304           *-vxworksae*)
1305             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1306             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1307             ;;
1308           *)
1309             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1310             tmake_file="${tmake_file} i386/t-vxworks"
1311             ;;
1312         esac
1313         ;;
1314 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1315         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1316         xm_file=i386/xm-cygwin.h
1317         tmake_file="i386/t-cygwin i386/t-cygming"
1318         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1319         extra_options="${extra_options} i386/cygming.opt"
1320         extra_objs="winnt.o winnt-stubs.o"
1321         c_target_objs=cygwin2.o
1322         cxx_target_objs="cygwin2.o winnt-cxx.o"
1323         extra_gcc_objs=cygwin1.o
1324         if test x$enable_threads = xyes; then
1325                 thread_file='posix'
1326         fi
1327         ;;
1328 i[34567]86-*-mingw32*)
1329         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1330         xm_file=i386/xm-mingw32.h
1331         tmake_file="i386/t-cygming i386/t-mingw32"
1332         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1333         extra_options="${extra_options} i386/cygming.opt"
1334         extra_objs="winnt.o winnt-stubs.o"
1335         cxx_target_objs=winnt-cxx.o
1336         default_use_cxa_atexit=yes
1337         case ${enable_threads} in
1338           "" | yes | win32)
1339           thread_file='win32'
1340           tmake_file="${tmake_file} i386/t-gthr-win32"
1341           ;;
1342         esac
1343         case ${target} in
1344                 *mingw32crt*)
1345                         tm_file="${tm_file} i386/crtdll.h"
1346                         ;;
1347                 *mingw32msv* | *mingw32*)
1348                         ;;
1349         esac
1350         ;;
1351 i[34567]86-*-uwin*)
1352         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1353         tmake_file="i386/t-cygwin i386/t-uwin"
1354         extra_objs=winnt.o
1355         extra_options="${extra_options} i386/cygming.opt"
1356         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1357         if test x$enable_threads = xyes; then
1358                 thread_file='win32'
1359         fi
1360         use_fixproto=yes
1361         ;;
1362 i[34567]86-*-interix3*)
1363         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1364         tmake_file="i386/t-interix"
1365         extra_objs=winnt.o
1366         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1367         if test x$enable_threads = xyes ; then
1368                 thread_file='posix'
1369         fi
1370         if test x$stabs = xyes ; then
1371                 tm_file="${tm_file} dbxcoff.h"
1372         fi
1373         ;;
1374 i[34567]86-*-kaos*)
1375         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1376         tmake_file="i386/t-i386elf t-svr4"
1377         ;;
1378 ia64*-*-elf*)
1379         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1380         tmake_file="ia64/t-ia64"
1381         target_cpu_default="0"
1382         if test x$gas = xyes
1383         then
1384                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1385         fi
1386         if test x$gnu_ld = xyes
1387         then
1388                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1389         fi
1390         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1391         use_fixproto=yes
1392         ;;
1393 ia64*-*-freebsd*)
1394         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1395         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1396         tmake_file="${tmake_file} ia64/t-ia64"
1397         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1398         ;;
1399 ia64*-*-linux*)
1400         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1401         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1402         if test x$with_system_libunwind != xyes ; then
1403                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1404         fi
1405         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1406         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1407         ;;
1408 ia64*-*-hpux*)
1409         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1410         tmake_file="ia64/t-ia64 ia64/t-hpux"
1411         target_cpu_default="MASK_GNU_AS"
1412         case x$enable_threads in
1413         xyes | xposix )
1414                 thread_file=posix
1415                 ;;
1416         esac
1417         use_collect2=no
1418         c_target_objs="ia64-c.o"
1419         cxx_target_objs="ia64-c.o"
1420         extra_options="${extra_options} ia64/ilp32.opt"
1421         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1422         # in ia64/t-hpux, and also fix the definition of putenv in
1423         # sys-protos.h (const char not char).
1424         ;;
1425 iq2000*-*-elf*)
1426         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1427         tmake_file=iq2000/t-iq2000
1428         out_file=iq2000/iq2000.c
1429         md_file=iq2000/iq2000.md
1430         use_fixproto=yes
1431         ;;
1432 m32r-*-elf*)
1433         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1434         extra_parts="crtinit.o crtfini.o"
1435         use_fixproto=yes
1436         ;;
1437 m32rle-*-elf*)
1438         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1439         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1440         use_fixproto=yes
1441         ;;
1442 m32r-*-linux*)
1443         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1444         # We override the tmake_file for linux -- why?
1445         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1446         gnu_ld=yes
1447         use_fixproto=yes
1448         if test x$enable_threads = xyes; then
1449                 thread_file='posix'
1450         fi
1451         ;;
1452 m32rle-*-linux*)
1453         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1454         # We override the tmake_file for linux -- why?
1455         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1456         gnu_ld=yes
1457         use_fixproto=yes
1458         if test x$enable_threads = xyes; then
1459                 thread_file='posix'
1460         fi
1461         ;;
1462 # m68hc11 and m68hc12 share the same machine description.
1463 m68hc11-*-*|m6811-*-*)
1464         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1465         tm_p_file="m68hc11/m68hc11-protos.h"
1466         md_file="m68hc11/m68hc11.md"
1467         out_file="m68hc11/m68hc11.c"
1468         tmake_file="m68hc11/t-m68hc11-gas"
1469         use_fixproto=yes
1470         ;;
1471 m68hc12-*-*|m6812-*-*)
1472         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1473         tm_p_file="m68hc11/m68hc11-protos.h"
1474         md_file="m68hc11/m68hc11.md"
1475         out_file="m68hc11/m68hc11.c"
1476         tmake_file="m68hc11/t-m68hc11-gas"
1477         extra_options="${extra_options} m68hc11/m68hc11.opt"
1478         use_fixproto=yes
1479         ;;
1480 m68k-*-aout*)
1481         default_m68k_cpu=68020
1482         tmake_file=m68k/t-m68kbare
1483         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1484         ;;
1485 m68k-*-coff*)
1486         default_m68k_cpu=68020
1487         tmake_file=m68k/t-m68kbare
1488         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1489         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1490         use_fixproto=yes
1491         ;;
1492 m68020-*-elf* | m68k-*-elf*)
1493         default_m68k_cpu=68020
1494         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1495         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1496         tmake_file=m68k/t-m68kelf
1497         extra_parts="crtbegin.o crtend.o"
1498         ;;
1499 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1500         default_m68k_cpu=68020
1501         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1502         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1503         ;;
1504 m68k*-*-openbsd*)
1505         default_m68k_cpu=68020
1506         # needed to unconfuse gdb
1507         tm_defines="${tm_defines} OBSD_OLD_GAS"
1508         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1509         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1510         # we need collect2 until our bug is fixed...
1511         use_collect2=yes
1512         ;;
1513 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1514         default_m68k_cpu=68020
1515         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1516         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1517         tmake_file=m68k/t-uclinux
1518         use_fixproto=no
1519         ;;
1520 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1521                                 # with ELF format using glibc 2
1522                                 # aka the GNU/Linux C library 6.
1523         default_m68k_cpu=68020
1524         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1525         extra_options="${extra_options} m68k/ieee.opt"
1526         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1527         # if not configured with --enable-sjlj-exceptions, bump the
1528         # libgcc version number
1529         if test x$sjlj != x1; then
1530             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1531         fi
1532         ;;
1533 m68k-*-rtems*)
1534         default_m68k_cpu=68020
1535         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1536         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1537         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1538         extra_parts="crtbegin.o crtend.o"
1539         ;;
1540 mcore-*-elf)
1541         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1542         tmake_file=mcore/t-mcore
1543         use_fixproto=yes
1544         ;;
1545 mcore-*-pe*)
1546         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1547         tmake_file=mcore/t-mcore-pe
1548         use_fixproto=yes
1549         ;;
1550 mips-sgi-irix[56]*)
1551         tm_file="elfos.h ${tm_file} mips/iris.h"
1552         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1553         target_cpu_default="MASK_ABICALLS"
1554         case ${target} in
1555         *-*-irix5*)
1556                 tm_file="${tm_file} mips/iris5.h"
1557                 ;;
1558
1559         *-*-irix6*)
1560                 tm_file="${tm_file} mips/iris6.h"
1561                 tmake_file="${tmake_file} mips/t-iris6"
1562                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1563                 ;;
1564         esac
1565         if test "x$stabs" = xyes
1566         then
1567                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1568         fi
1569         if test "x$gnu_ld" = xyes
1570         then
1571                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1572         fi
1573 #       if test x$enable_threads = xyes; then
1574 #               thread_file='irix'
1575 #       fi
1576         use_fixproto=yes
1577         ;;
1578 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1579         target_cpu_default="MASK_ABICALLS"
1580         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1581         ;;
1582 mips64*-*-linux*)
1583         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1584         tmake_file="${tmake_file} mips/t-linux64"
1585         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1586         gnu_ld=yes
1587         gas=yes
1588         ;;
1589 mips*-*-linux*)                         # Linux MIPS, either endian.
1590         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1591         case ${target} in
1592         mipsisa32*-*)
1593                 target_cpu_default="MASK_SOFT_FLOAT"
1594                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1595                 ;;
1596         esac
1597         ;;
1598 mips*-*-openbsd*)
1599         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1600         target_cpu_default="MASK_ABICALLS"
1601         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1602         case ${target} in
1603         mips*el-*-openbsd*)
1604             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1605         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1606         esac
1607         ;;
1608 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1609         tm_file="elfos.h ${tm_file} mips/elf.h"
1610         tmake_file=mips/t-isa3264
1611         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1612         use_fixproto=yes
1613         ;;
1614 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1615         tm_file="elfos.h ${tm_file} mips/elf.h"
1616         tmake_file=mips/t-isa3264
1617         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1618         use_fixproto=yes
1619         ;;
1620 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1621         tm_file="elfos.h ${tm_file} mips/elf.h"
1622         tmake_file=mips/t-isa3264
1623         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1624         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1625         use_fixproto=yes
1626         ;;
1627 mipsisa64sr71k-*-elf*)
1628         tm_file="elfos.h ${tm_file} mips/elf.h"
1629         tmake_file=mips/t-sr71k
1630         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1631         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1632         use_fixproto=yes
1633         ;;
1634 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1635         tm_file="elfos.h ${tm_file} mips/elf.h"
1636         tmake_file="mips/t-elf mips/t-sb1"
1637         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1638         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1639         use_fixproto=yes
1640         ;;
1641 mips-*-elf* | mipsel-*-elf*)
1642         tm_file="elfos.h ${tm_file} mips/elf.h"
1643         tmake_file=mips/t-elf
1644         use_fixproto=yes
1645         ;;
1646 mips64-*-elf* | mips64el-*-elf*)
1647         tm_file="elfos.h ${tm_file} mips/elf.h"
1648         tmake_file=mips/t-elf
1649         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1650         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1651         use_fixproto=yes
1652         ;;
1653 mips64vr-*-elf* | mips64vrel-*-elf*)
1654         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1655         tmake_file=mips/t-vr
1656         use_fixproto=yes
1657         ;;
1658 mips64orion-*-elf* | mips64orionel-*-elf*)
1659         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1660         tmake_file=mips/t-elf
1661         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1662         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1663         use_fixproto=yes
1664         ;;
1665 mips*-*-rtems*)
1666         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1667         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1668         ;;
1669 mips-wrs-vxworks)
1670         # We want vxworks.h after mips/elf.h, which unfortunately means we
1671         # have to redo the tm_file list from scratch.
1672         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1673         tmake_file="${tmake_file} mips/t-vxworks"
1674         ;;
1675 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1676         xm_defines=POSIX
1677         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1678         tmake_file="${tmake_file} mips/t-elf"
1679         thread_file=
1680         ;;
1681 mipstx39-*-elf* | mipstx39el-*-elf*)
1682         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1683         tmake_file=mips/t-r3900
1684         use_fixproto=yes
1685         ;;
1686 mmix-knuth-mmixware)
1687         need_64bit_hwint=yes
1688         ;;
1689 mn10300-*-*)
1690         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1691         if test x$stabs = xyes
1692         then
1693                 tm_file="${tm_file} dbx.h"
1694         fi
1695         use_collect2=no
1696         use_fixproto=yes
1697         ;;
1698 mt-*-elf)
1699         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1700         tmake_file="${tmake_file} mt/t-mt"
1701         ;;
1702 ns32k-*-netbsdelf*)
1703         echo "GCC does not yet support the ${target} target"; exit 1
1704         ;;
1705 ns32k-*-netbsd*)
1706         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1707         # On NetBSD, the headers are already okay, except for math.h.
1708         tmake_file="t-netbsd ns32k/t-ns32k"
1709         extra_parts=""
1710         use_collect2=yes
1711         ;;
1712 pdp11-*-bsd)
1713         tm_file="${tm_file} pdp11/2bsd.h"
1714         use_fixproto=yes
1715         ;;
1716 pdp11-*-*)
1717         use_fixproto=yes
1718         ;;
1719 # port not yet contributed
1720 #powerpc-*-openbsd*)
1721 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1722 #       extra_headers=
1723 #       ;;
1724 powerpc64-*-linux*)
1725         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1726         test x$with_cpu != x || cpu_is_64bit=yes
1727         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1728         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1729         if test x${enable_secureplt} = xyes; then
1730                 tm_file="rs6000/secureplt.h ${tm_file}"
1731         fi
1732         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1733         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1734         ;;
1735 powerpc64-*-gnu*)
1736         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1737         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1738         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1739         ;;
1740 powerpc-*-beos*)
1741         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1742         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1743         extra_headers=
1744         use_fixproto=yes
1745         ;;
1746 powerpc-*-darwin*)
1747         extra_options="${extra_options} rs6000/darwin.opt"
1748         extra_parts="crt2.o"
1749         case ${target} in
1750           *-darwin1[0-9]* | *-darwin[8-9]*)
1751             tmake_file="${tmake_file} rs6000/t-darwin8"
1752             tm_file="${tm_file} rs6000/darwin8.h"
1753             ;;
1754           *-darwin7*)
1755             tm_file="${tm_file} rs6000/darwin7.h"
1756             ;;
1757           *-darwin[0-6]*)
1758             ;;
1759         esac
1760         extra_headers=altivec.h
1761         ;;
1762 powerpc64-*-darwin*)
1763         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1764         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1765         # We're omitting t-darwin8 to avoid building any multilibs
1766         extra_headers=altivec.h
1767         ;;
1768 powerpc*-*-freebsd*)
1769         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1770         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1771         extra_options="${extra_options} rs6000/sysv4.opt"
1772         ;;
1773 powerpc-*-netbsd*)
1774         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1775         tmake_file="${tmake_file} rs6000/t-netbsd"
1776         extra_options="${extra_options} rs6000/sysv4.opt"
1777         ;;
1778 powerpc-*-chorusos*)
1779         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1780         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1781         extra_options="${extra_options} rs6000/sysv4.opt"
1782         case ${enable_threads} in
1783           yes | posix)
1784             thread_file='posix'
1785             ;;
1786         esac
1787         use_fixproto=yes
1788         ;;
1789 powerpc-*-eabispe*)
1790         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1791         extra_options="${extra_options} rs6000/sysv4.opt"
1792         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1793         ;;
1794 powerpc-*-eabisimaltivec*)
1795         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1796         extra_options="${extra_options} rs6000/sysv4.opt"
1797         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1798         ;;
1799 powerpc-*-eabisim*)
1800         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1801         extra_options="${extra_options} rs6000/sysv4.opt"
1802         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1803         ;;
1804 powerpc-*-elf*)
1805         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1806         extra_options="${extra_options} rs6000/sysv4.opt"
1807         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1808         use_fixproto=yes
1809         ;;
1810 powerpc-*-eabialtivec*)
1811         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1812         extra_options="${extra_options} rs6000/sysv4.opt"
1813         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1814         ;;
1815 powerpc-*-eabi*)
1816         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1817         extra_options="${extra_options} rs6000/sysv4.opt"
1818         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1819         ;;
1820 powerpc-*-rtems*)
1821         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1822         extra_options="${extra_options} rs6000/sysv4.opt"
1823         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1824         ;;
1825 powerpc-*-linux*altivec*)
1826         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1827         extra_options="${extra_options} rs6000/sysv4.opt"
1828         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1829         ;;
1830 powerpc-*-linux*spe*)
1831         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1832         extra_options="${extra_options} rs6000/sysv4.opt"
1833         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1834         ;;
1835 powerpc-*-linux*)
1836         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1837         extra_options="${extra_options} rs6000/sysv4.opt"
1838         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1839         case ${enable_targets}:${cpu_is_64bit} in
1840             *powerpc64* | all:* | *:yes)
1841                 if test x$cpu_is_64bit = xyes; then
1842                     tm_file="${tm_file} rs6000/default64.h"
1843                 fi
1844                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1845                 tmake_file="$tmake_file rs6000/t-linux64"
1846                 extra_options="${extra_options} rs6000/linux64.opt"
1847                 ;;
1848             *)
1849                 tm_file="${tm_file} rs6000/linux.h"
1850                 ;;
1851         esac
1852         if test x${enable_secureplt} = xyes; then
1853                 tm_file="rs6000/secureplt.h ${tm_file}"
1854         fi
1855         ;;
1856 powerpc-*-gnu-gnualtivec*)
1857         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1858         extra_options="${extra_options} rs6000/sysv4.opt"
1859         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1860         if test x$enable_threads = xyes; then
1861                 thread_file='posix'
1862         fi
1863         ;;
1864 powerpc-*-gnu*)
1865         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1866         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1867         extra_options="${extra_options} rs6000/sysv4.opt"
1868         if test x$enable_threads = xyes; then
1869                 thread_file='posix'
1870         fi
1871         ;;
1872 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1873         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1874         # means we have to redo the tm_file list from scratch.
1875         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1876         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1877         extra_options="${extra_options} rs6000/sysv4.opt"
1878         extra_headers=ppc-asm.h
1879         case ${target} in
1880           *-vxworksae*)
1881             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1882             tmake_file="${tmake_file} rs6000/t-vxworksae"
1883             ;;
1884           *-vxworks*)
1885             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1886             ;;
1887         esac
1888         ;;
1889 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1890         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1891         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1892         extra_options="${extra_options} rs6000/sysv4.opt"
1893         thread_file=""
1894         use_fixproto=yes
1895         ;;
1896 powerpc-*-lynxos*)
1897         xm_defines=POSIX
1898         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1899         tmake_file="t-lynx rs6000/t-lynx"
1900         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1901         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1902         extra_options="${extra_options} lynx.opt"
1903         thread_file=lynx
1904         gnu_ld=yes
1905         gas=yes
1906         ;;
1907 powerpcle-*-sysv*)
1908         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1909         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1910         extra_options="${extra_options} rs6000/sysv4.opt"
1911         use_fixproto=yes
1912         ;;
1913 powerpcle-*-elf*)
1914         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1915         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1916         extra_options="${extra_options} rs6000/sysv4.opt"
1917         use_fixproto=yes
1918         ;;
1919 powerpcle-*-eabisim*)
1920         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1921         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1922         extra_options="${extra_options} rs6000/sysv4.opt"
1923         ;;
1924 powerpcle-*-eabi*)
1925         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
1926         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1927         extra_options="${extra_options} rs6000/sysv4.opt"
1928         ;;
1929 powerpc-*-kaos*)
1930         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1931         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1932         extra_options="${extra_options} rs6000/sysv4.opt"
1933         ;;
1934 powerpcle-*-kaos*)
1935         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1936         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1937         extra_options="${extra_options} rs6000/sysv4.opt"
1938         ;;
1939 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1940         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1941         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1942         extra_options="${extra_options} rs6000/aix41.opt"
1943         use_collect2=yes
1944         extra_headers=
1945         use_fixproto=yes
1946         ;;
1947 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1948         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1949         tmake_file=rs6000/t-aix43
1950         extra_options="${extra_options} rs6000/aix64.opt"
1951         use_collect2=yes
1952         thread_file='aix'
1953         extra_headers=
1954         ;;
1955 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1956         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1957         extra_options="${extra_options} rs6000/aix64.opt"
1958         tmake_file=rs6000/t-aix43
1959         use_collect2=yes
1960         thread_file='aix'
1961         extra_headers=
1962         ;;
1963 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1964         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1965         tmake_file=rs6000/t-aix52
1966         extra_options="${extra_options} rs6000/aix64.opt"
1967         use_collect2=yes
1968         thread_file='aix'
1969         extra_headers=
1970         ;;
1971 s390-*-linux*)
1972         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1973         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1974         ;;
1975 s390x-*-linux*)
1976         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1977         tm_p_file=s390/s390-protos.h
1978         md_file=s390/s390.md
1979         extra_modes=s390/s390-modes.def
1980         out_file=s390/s390.c
1981         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1982         ;;
1983 s390x-ibm-tpf*)
1984         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1985         tm_p_file=s390/s390-protos.h
1986         md_file=s390/s390.md
1987         extra_modes=s390/s390-modes.def
1988         out_file=s390/s390.c
1989         extra_parts="crtbeginS.o crtendS.o"
1990         tmake_file="s390/t-crtstuff s390/t-tpf"
1991         thread_file='tpf'
1992         extra_options="${extra_options} s390/tpf.opt"
1993         ;;
1994 score-*-elf)
1995         tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
1996         tmake_file=score/t-score-elf
1997         extra_objs="score-mdaux.o"
1998         ;;
1999 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
2000 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2001   sh-*-linux* | sh[346lbe]*-*-linux* | \
2002   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2003    sh64-*-netbsd* | sh64l*-*-netbsd*)
2004         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2005         if test x${with_endian} = x; then
2006                 case ${target} in
2007                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2008                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2009                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2010                 shl* | sh64l* | sh*-*-linux* | \
2011                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2012                 sh[1234]*-*-*)                     with_endian=big ;;
2013                 *)                                 with_endian=big,little ;;
2014                 esac
2015         fi
2016         case ${with_endian} in
2017         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
2018         big,little|little,big) ;;
2019         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2020         esac
2021         case ${with_endian} in
2022         little*)        tm_file="sh/little.h ${tm_file}" ;;
2023         esac
2024         tm_file="${tm_file} dbxelf.h elfos.h"
2025         case ${target} in
2026         sh*-*-netbsd*)  ;;
2027         *)              tm_file="${tm_file} svr4.h" ;;
2028         esac
2029         tm_file="${tm_file} sh/elf.h"
2030         case ${target} in
2031         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2032                         tm_file="${tm_file} linux.h sh/linux.h" ;;
2033         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2034                         ;;
2035         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2036         sh*-superh-elf) if test x$with_libgloss != xno; then
2037                                 with_libgloss=yes
2038                                 tm_file="${tm_file} sh/newlib.h"
2039                         fi
2040                         tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
2041                         tmake_file="${tmake_file} sh/t-superh"
2042                         extra_options="${extra_options} sh/superh.opt" ;;
2043         *)              if test x$with_newlib = xyes \
2044                            && test x$with_libgloss = xyes; then
2045                                 tm_file="${tm_file} sh/newlib.h"
2046                         fi
2047                         tm_file="${tm_file} sh/embed-elf.h" ;;
2048         esac
2049         case ${target} in
2050         sh5*-*-netbsd*)
2051                 # SHmedia, 32-bit ABI
2052                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2053                 ;;
2054         sh64*-netbsd*)
2055                 # SHmedia, 64-bit ABI
2056                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2057                 ;;
2058         *-*-netbsd)
2059                 tmake_file="${tmake_file} sh/t-netbsd"
2060                 ;;
2061         sh64*-*-linux*)
2062                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2063                 tm_file="${tm_file} sh/sh64.h"
2064                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2065                 ;;
2066         sh64*)
2067                 tmake_file="${tmake_file} sh/t-sh64"
2068                 tm_file="${tm_file} sh/sh64.h"
2069                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2070                 ;;
2071         *-*-symbianelf*)
2072                 tmake_file="sh/t-symbian"
2073                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2074                 extra_objs="symbian.o"
2075                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2076                 ;;
2077         esac
2078         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2079         case `echo ${target} | sed 's/e[lb]-/-/'` in
2080         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2081         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2082         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2083         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2084         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2085         sh4al)                  sh_cpu_target=sh4al ;;
2086         sh4a*)                  sh_cpu_target=sh4a ;;
2087         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2088         sh4_single*)            sh_cpu_target=sh4-single ;;
2089         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2090         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2091         sh3e*)                  sh_cpu_target=sh3e ;;
2092         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2093         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2094         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2095         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2096         sh2a*)                  sh_cpu_target=sh2a ;;
2097         sh2e*)                  sh_cpu_target=sh2e ;;
2098         sh2*)                   sh_cpu_target=sh2 ;;
2099         *)                      sh_cpu_target=sh1 ;;
2100         esac
2101         # did the user say --without-fp ?
2102         if test x$with_fp = xno; then
2103                 case ${sh_cpu_target} in
2104                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2105                 sh4al | sh1)    ;;
2106                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2107                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2108                 sh3*)           sh_cpu_target=sh3 ;;
2109                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2110                 sh2*)           sh_cpu_target=sh2 ;;
2111                 *)      echo --without-fp not available for $target: ignored
2112                 esac
2113                 tm_defines="$tm_defines STRICT_NOFPU=1"
2114         fi
2115         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2116         case $sh_cpu_default in
2117         sh5-64media-nofpu | sh5-64media | \
2118           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2119           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2120           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2121           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
2122           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2123         "")     sh_cpu_default=${sh_cpu_target} ;;
2124         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2125         esac
2126         sh_multilibs=${with_multilib_list}
2127         if test x${sh_multilibs} = x ; then
2128                 case ${target} in
2129                 sh64-superh-linux* | \
2130                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2131                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2132                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2133                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2134                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2135                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2136                 esac
2137                 if test x$with_fp = xno; then
2138                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2139                 fi
2140         fi
2141         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2142         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2143         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2144         for sh_multilib in ${sh_multilibs}; do
2145                 case ${sh_multilib} in
2146                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2147                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
2148                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2149                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2150                 sh5-64media | sh5-64media-nofpu | \
2151                 sh5-32media | sh5-32media-nofpu | \
2152                 sh5-compact | sh5-compact-nofpu)
2153                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2154                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2155                         ;;
2156                 *)
2157                         echo "with_multilib_list=${sh_multilib} not supported."
2158                         exit 1
2159                         ;;
2160                 esac
2161         done
2162         if test x${enable_incomplete_targets} = xyes ; then
2163                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2164         fi
2165         use_fixproto=yes
2166         ;;
2167 sh-*-rtemscoff*)
2168         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2169         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2170         ;;
2171 sh-*-rtems*)
2172         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2173         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2174         ;;
2175 sh-wrs-vxworks)
2176         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2177         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2178         ;;
2179 sh-*-*)
2180         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2181         use_fixproto=yes
2182         ;;
2183 sparc-*-netbsdelf*)
2184         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2185         extra_options="${extra_options} sparc/long-double-switch.opt"
2186         ;;
2187 sparc64-*-openbsd*)
2188         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2189         extra_options="${extra_options} sparc/little-endian.opt"
2190         gas=yes gnu_ld=yes
2191         with_cpu=ultrasparc
2192         ;;
2193 sparc-*-elf*)
2194         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2195         tmake_file="sparc/t-elf sparc/t-crtfm"
2196         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2197         use_fixproto=yes
2198         ;;
2199 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2200         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2201         extra_options="${extra_options} sparc/long-double-switch.opt"
2202         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2203         ;;
2204 sparc-*-rtems*)
2205         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2206         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2207         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2208         ;;
2209 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2210         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2211         case ${target} in
2212         *-*-solaris2.1[0-9]*)
2213                 tm_file="${tm_file} sol2-10.h"
2214                 ;;
2215         esac
2216         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2217         if test x$gnu_ld = xyes; then
2218                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2219         fi
2220         if test x$gas = xyes; then
2221                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2222         fi
2223         tm_file="${tm_file} tm-dwarf2.h"
2224         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2225         if test x$gnu_ld = xyes; then
2226                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2227         else
2228                 tmake_file="$tmake_file t-slibgcc-sld"
2229         fi
2230         c_target_objs="sol2-c.o"
2231         cxx_target_objs="sol2-c.o"
2232         extra_objs="sol2.o"
2233         tm_p_file="${tm_p_file} sol2-protos.h"
2234         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2235         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2236           "":yes:* | yes:yes:* ) thread_file=posix ;;
2237           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2238         esac
2239         need_64bit_hwint=yes
2240         ;;
2241 sparc-*-solaris2*)
2242         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2243         case ${target} in
2244         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2245                 tm_file="${tm_file} sol2-6.h"
2246                 ;;
2247         *-*-solaris2.1[0-9]*)
2248                 tm_file="${tm_file} sol2-10.h"
2249                 ;;
2250         esac
2251         tm_file="${tm_file} sparc/sol2.h"
2252         if test x$gnu_ld = xyes; then
2253                 tm_file="${tm_file} sparc/sol2-gld.h"
2254         fi
2255         if test x$gas = xyes; then
2256                 tm_file="${tm_file} sparc/sol2-gas.h"
2257         fi
2258         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2259         if test x$gnu_ld = xyes; then
2260                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2261         else
2262                 tmake_file="$tmake_file t-slibgcc-sld"
2263         fi
2264         case ${target} in
2265         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2266                 if test x$gnu_ld = xno; then
2267                         tm_file="${tm_file} sparc/sol26-sld.h"
2268                 fi
2269                 ;;
2270         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2271                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2272                 if test x$gnu_ld = xyes; then
2273                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2274                 fi
2275                 if test x$gas = xyes; then
2276                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2277                 fi
2278                 tm_file="${tm_file} tm-dwarf2.h"
2279                 tmake_file="$tmake_file sparc/t-sol2-64"
2280                 need_64bit_hwint=yes
2281                 test x$with_cpu != x || with_cpu=v9
2282                 ;;
2283         esac
2284         c_target_objs="sol2-c.o"
2285         cxx_target_objs="sol2-c.o"
2286         extra_objs="sol2.o"
2287         tm_p_file="${tm_p_file} sol2-protos.h"
2288         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2289         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2290           "":yes:* | yes:yes:* )
2291                 case ${target} in
2292                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2293                         thread_file=posix95
2294                         ;;
2295                   *)
2296                         thread_file=posix
2297                         ;;
2298                 esac
2299                 ;;
2300           "":*:yes | yes:*:yes )
2301                 thread_file=solaris
2302                 ;;
2303         esac
2304         ;;
2305 sparc-*-sysv4*)
2306         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2307         tmake_file=t-svr4
2308         extra_parts="crtbegin.o crtend.o"
2309         use_fixproto=yes
2310         ;;
2311 sparc64-*-elf*)
2312         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2313         extra_options="${extra_options} sparc/little-endian.opt"
2314         tmake_file="${tmake_file} sparc/t-crtfm"
2315         extra_parts="crtbegin.o crtend.o"
2316         use_fixproto=yes
2317         ;;
2318 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2319         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2320         extra_options="${extra_options} sparc/long-double-switch.opt"
2321         tmake_file="${tmake_file} sparc/t-crtfm"
2322         case "x$with_cpu" in
2323                 xultrasparc) ;;
2324                 x) with_cpu=ultrasparc ;;
2325                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2326         esac
2327         need_64bit_hwint=yes
2328         ;;
2329 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2330         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2331         extra_options="${extra_options} sparc/long-double-switch.opt"
2332         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2333         ;;
2334 sparc64-*-netbsd*)
2335         tm_file="sparc/biarch64.h ${tm_file}"
2336         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2337         extra_options="${extra_options} sparc/long-double-switch.opt"
2338         tmake_file="${tmake_file} sparc/t-netbsd64"
2339         ;;
2340 spu-*-elf*)
2341         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2342         tmake_file="spu/t-spu-elf"
2343         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2344         extra_modes=spu/spu-modes.def
2345         c_target_objs="${c_target_objs} spu-c.o"
2346         cxx_target_objs="${cxx_target_objs} spu-c.o"
2347         ;;
2348 strongarm-*-elf*)
2349         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2350         tmake_file="arm/t-arm arm/t-strongarm-elf"
2351         out_file=arm/arm.c
2352         md_file=arm/arm.md
2353         extra_modes=arm/arm-modes.def
2354         use_fixproto=yes
2355         ;;
2356 strongarm-*-pe)
2357         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2358         tmake_file="arm/t-arm arm/t-strongarm-pe"
2359         out_file=arm/arm.c
2360         md_file=arm/arm.md
2361         extra_modes=arm/arm-modes.def
2362         extra_options="${extra_options} arm/pe.opt"
2363         extra_objs=pe.o
2364         use_fixproto=yes
2365         ;;
2366 strongarm-*-kaos*)
2367         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2368         tmake_file="arm/t-arm arm/t-strongarm-elf"
2369         out_file=arm/arm.c
2370         md_file=arm/arm.md
2371         extra_modes=arm/arm-modes.def
2372         ;;
2373 v850e1-*-*)
2374         target_cpu_default="TARGET_CPU_v850e1"
2375         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2376         tm_p_file=v850/v850-protos.h
2377         tmake_file=v850/t-v850e
2378         md_file=v850/v850.md
2379         out_file=v850/v850.c
2380         extra_options="${extra_options} v850/v850.opt"
2381         if test x$stabs = xyes
2382         then
2383                 tm_file="${tm_file} dbx.h"
2384         fi
2385         use_collect2=no
2386         c_target_objs="v850-c.o"
2387         cxx_target_objs="v850-c.o"
2388         use_fixproto=yes
2389         ;;
2390 v850e-*-*)
2391         target_cpu_default="TARGET_CPU_v850e"
2392         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2393         tm_p_file=v850/v850-protos.h
2394         tmake_file=v850/t-v850e
2395         md_file=v850/v850.md
2396         out_file=v850/v850.c
2397         extra_options="${extra_options} v850/v850.opt"
2398         if test x$stabs = xyes
2399         then
2400                 tm_file="${tm_file} dbx.h"
2401         fi
2402         use_collect2=no
2403         c_target_objs="v850-c.o"
2404         cxx_target_objs="v850-c.o"
2405         use_fixproto=yes
2406         ;;
2407 v850-*-*)
2408         target_cpu_default="TARGET_CPU_generic"
2409         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2410         tmake_file=v850/t-v850
2411         if test x$stabs = xyes
2412         then
2413                 tm_file="${tm_file} dbx.h"
2414         fi
2415         use_collect2=no
2416         c_target_objs="v850-c.o"
2417         cxx_target_objs="v850-c.o"
2418         use_fixproto=yes
2419         ;;
2420 vax-*-bsd*)                     # VAXen running BSD
2421         tm_file="${tm_file} vax/bsd.h"
2422         tmake_file=vax/t-memfuncs
2423         use_collect2=yes
2424         use_fixproto=yes
2425         ;;
2426 vax-*-sysv*)                    # VAXen running system V
2427         tm_file="${tm_file} vax/vaxv.h"
2428         tmake_file=vax/t-memfuncs
2429         use_fixproto=yes
2430         ;;
2431 vax-*-netbsdelf*)
2432         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2433         ;;
2434 vax-*-netbsd*)
2435         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2436         tmake_file=t-netbsd
2437         extra_parts=""
2438         use_collect2=yes
2439         ;;
2440 vax-*-openbsd*)
2441         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2442         use_collect2=yes
2443         ;;
2444 vax-*-ultrix*)                  # VAXen running ultrix
2445         tm_file="${tm_file} vax/ultrix.h"
2446         tmake_file=vax/t-memfuncs
2447         use_fixproto=yes
2448         ;;
2449 xscale-*-elf)
2450         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2451         tmake_file="arm/t-arm arm/t-xscale-elf"
2452         out_file=arm/arm.c
2453         md_file=arm/arm.md
2454         extra_modes=arm/arm-modes.def
2455         use_fixproto=yes
2456         ;;
2457 xscale-*-coff)
2458         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2459         tmake_file="arm/t-arm arm/t-xscale-coff"
2460         out_file=arm/arm.c
2461         md_file=arm/arm.md
2462         extra_modes=arm/arm-modes.def
2463         use_fixproto=yes
2464         ;;
2465 xstormy16-*-elf)
2466         # For historical reasons, the target files omit the 'x'.
2467         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2468         tm_p_file=stormy16/stormy16-protos.h
2469         md_file=stormy16/stormy16.md
2470         out_file=stormy16/stormy16.c
2471         extra_options=stormy16/stormy16.opt
2472         tmake_file="stormy16/t-stormy16"
2473         extra_parts="crtbegin.o crtend.o"
2474         use_fixproto=yes
2475         ;;
2476 xtensa-*-elf*)
2477         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2478         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2479         ;;
2480 xtensa-*-linux*)
2481         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2482         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2483         ;;
2484 am33_2.0-*-linux*)
2485         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2486         tmake_file="${tmake_file} mn10300/t-linux"
2487         gas=yes gnu_ld=yes
2488         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2489         use_collect2=no
2490         ;;
2491 m32c-*-elf*)
2492         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2493         c_target_objs="m32c-pragma.o"
2494         cxx_target_objs="m32c-pragma.o"
2495         use_fixproto=yes
2496         ;;
2497 *)
2498         echo "*** Configuration ${target} not supported" 1>&2
2499         exit 1
2500         ;;
2501 esac
2502
2503 case ${target} in
2504 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2505         tmake_file="${tmake_file} i386/t-gmm_malloc"
2506         ;;
2507 i[34567]86-*-linux* | x86_64-*-linux*)
2508         tmake_file="${tmake_file} i386/t-pmm_malloc"
2509         ;;
2510 i[34567]86-*-* | x86_64-*-*)
2511         tmake_file="${tmake_file} i386/t-gmm_malloc"
2512         ;;
2513 esac
2514
2515 # Support for --with-cpu and related options (and a few unrelated options,
2516 # too).
2517 case ${with_cpu} in
2518   yes | no)
2519     echo "--with-cpu must be passed a value" 1>&2
2520     exit 1
2521     ;;
2522 esac
2523
2524 # If there is no $with_cpu option, try to infer one from ${target}.
2525 # This block sets nothing except for with_cpu.
2526 if test x$with_cpu = x ; then
2527   case ${target} in
2528     ep9312-*-*)
2529       # A Cirrus ARM variant.
2530       with_cpu="ep9312"
2531       ;;
2532     i386-*-*)
2533       with_cpu=i386
2534       ;;
2535     i486-*-*)
2536       with_cpu=i486
2537       ;;
2538     i586-*-*)
2539       case ${target_noncanonical} in
2540         k6_2-*)
2541           with_cpu=k6-2
2542           ;;
2543         k6_3-*)
2544           with_cpu=k6-3
2545           ;;
2546         k6-*)
2547           with_cpu=k6
2548           ;;
2549         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2550           with_cpu=pentium-mmx
2551           ;;
2552         *)
2553           with_cpu=pentium
2554           ;;
2555       esac
2556       ;;
2557     i686-*-* | i786-*-*)
2558       case ${target_noncanonical} in
2559         k8-*|opteron-*|athlon_64-*)
2560           with_cpu=k8
2561           ;;
2562         athlon_xp-*|athlon_mp-*|athlon_4-*)
2563           with_cpu=athlon-4
2564           ;;
2565         athlon_tbird-*|athlon-*)
2566           with_cpu=athlon
2567           ;;
2568         pentium2-*)
2569           with_cpu=pentium2
2570           ;;
2571         pentium3-*|pentium3m-*)
2572           with_cpu=pentium3
2573           ;;
2574         pentium4-*|pentium4m-*)
2575           with_cpu=pentium4
2576           ;;
2577         prescott-*)
2578           with_cpu=prescott
2579           ;;
2580         nocona-*)
2581           with_cpu=nocona
2582           ;;
2583         pentium_m-*)
2584           with_cpu=pentium-m
2585           ;;
2586         pentiumpro-*)
2587           with_cpu=pentiumpro
2588           ;;
2589         *)
2590           with_cpu=generic
2591           ;;
2592       esac
2593       ;;
2594     x86_64-*-*)
2595       case ${target_noncanonical} in
2596         k8-*|opteron-*|athlon_64-*)
2597           with_cpu=k8
2598           ;;
2599         nocona-*)
2600           with_cpu=nocona
2601           ;;
2602         *)
2603           with_cpu=generic
2604           ;;
2605       esac
2606       ;;
2607     alphaev6[78]*-*-*)
2608       with_cpu=ev67
2609       ;;
2610     alphaev6*-*-*)
2611       with_cpu=ev6
2612       ;;
2613     alphapca56*-*-*)
2614       with_cpu=pca56
2615       ;;
2616     alphaev56*-*-*)
2617       with_cpu=ev56
2618       ;;
2619     alphaev5*-*-*)
2620       with_cpu=ev5
2621       ;;
2622     frv-*-*linux* | frv400-*-*linux*)
2623       with_cpu=fr400
2624       ;;
2625     frv550-*-*linux*)
2626       with_cpu=fr550
2627       ;;
2628     m680[012]0-*-*)
2629       with_cpu=`echo ${target} | sed 's/-.*$//'`
2630       ;;
2631     m68k*-*-*)
2632       with_cpu=m${default_m68k_cpu}
2633       ;;
2634     sparc*-*-*)
2635       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2636       ;;
2637   esac
2638 fi
2639
2640 # Similarly for --with-float
2641 if test x$with_float = x; then
2642         case ${target} in
2643         ep9312-*-*)
2644                 with_float=hard
2645                 ;;
2646         esac
2647 fi
2648
2649 # Similarly for --with-schedule.
2650 if test x$with_schedule = x; then
2651         case ${target} in
2652         hppa1* | parisc1*)
2653                 # Override default PA8000 scheduling model.
2654                 with_schedule=7100LC
2655                 ;;
2656         esac
2657 fi
2658
2659 # Validate and mark as valid any --with options supported
2660 # by this target.  In order to use a particular --with option
2661 # you must list it in supported_defaults; validating the value
2662 # is optional.  This case statement should set nothing besides
2663 # supported_defaults.
2664
2665 supported_defaults=
2666 case "${target}" in
2667         alpha*-*-*)
2668                 supported_defaults="cpu tune"
2669                 for which in cpu tune; do
2670                         eval "val=\$with_$which"
2671                         case "$val" in
2672                         "" \
2673                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2674                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2675                         | 21264a)
2676                                 ;;
2677                         *)
2678                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2679                                 exit 1
2680                                 ;;
2681                         esac
2682                 done
2683                 ;;
2684
2685         arm*-*-*)
2686                 supported_defaults="arch cpu float tune fpu abi mode"
2687                 for which in cpu tune; do
2688                         # See if it matches any of the entries in arm-cores.def
2689                         eval "val=\$with_$which"
2690                         if [ x"$val" = x ] \
2691                             || grep "^ARM_CORE(\"$val\"," \
2692                                     ${srcdir}/config/arm/arm-cores.def \
2693                                     > /dev/null; then
2694                           # Ok
2695                           new_val=`grep "^ARM_CORE(\"$val\"," \
2696                                 ${srcdir}/config/arm/arm-cores.def | \
2697                                 sed -e 's/^[^,]*,[      ]*//' | \
2698                                 sed -e 's/,.*$//'`
2699                           eval "target_${which}_cname=$new_val"
2700                         echo "For $val real value is $new_val"
2701                           true
2702                         else
2703                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2704                           exit 1
2705                         fi
2706                 done
2707
2708                 case "$with_arch" in
2709                 "" \
2710                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2711                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2712                 | iwmmxt | ep9312)
2713                         # OK
2714                         ;;
2715                 *)
2716                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2717                         exit 1
2718                         ;;
2719                 esac
2720
2721                 case "$with_float" in
2722                 "" \
2723                 | soft | hard | softfp)
2724                         # OK
2725                         ;;
2726                 *)
2727                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2728                         exit 1
2729                         ;;
2730                 esac
2731
2732                 case "$with_fpu" in
2733                 "" \
2734                 | fpa | fpe2 | fpe3 | maverick | vfp )
2735                         # OK
2736                         ;;
2737                 *)
2738                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2739                         exit 1
2740                         ;;
2741                 esac
2742
2743                 case "$with_abi" in
2744                 "" \
2745                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2746                         #OK
2747                         ;;
2748                 *)
2749                         echo "Unknown ABI used in --with-abi=$with_abi"
2750                         exit 1
2751                         ;;
2752                 esac
2753
2754                 case "$with_mode" in
2755                 "" \
2756                 | arm | thumb )
2757                         #OK
2758                         ;;
2759                 *)
2760                         echo "Unknown mode used in --with-mode=$with_mode"
2761                         exit 1
2762                         ;;
2763                 esac
2764
2765                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2766                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2767                 fi
2768                 ;;
2769
2770         fr*-*-*linux*)
2771                 supported_defaults=cpu
2772                 case "$with_cpu" in
2773                 fr400) ;;
2774                 fr550) ;;
2775                 *)
2776                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2777                         exit 1
2778                         ;;
2779                 esac
2780                 ;;
2781
2782         m680[012]0-*-* | m68k*-*-*)
2783                 supported_defaults="cpu"
2784
2785                 # We always have a $with_cpu setting here.
2786                 case "$with_cpu" in
2787                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2788                         m68k_cpu_ident=$with_cpu
2789                         ;;
2790                 "m68020-40")
2791                         m68k_cpu_ident=m68020
2792                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2793                         ;;
2794                 "m68020-60")
2795                         m68k_cpu_ident=m68020
2796                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2797                         ;;
2798                 *)
2799                         # We need the C identifier rather than the string.
2800                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2801                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2802                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2803                                  ${srcdir}/config/m68k/m68k-devices.def`
2804                         if [ x"$m68k_cpu_ident" = x ] ; then
2805                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2806                                 exit 1
2807                         fi
2808                         with_cpu="mcpu=$with_cpu"
2809                         ;;
2810                 esac
2811                 ;;
2812
2813         hppa*-*-* | parisc*-*-*)
2814                 supported_defaults="arch schedule"
2815
2816                 case "$with_arch" in
2817                 "" | 1.0 | 1.1 | 2.0)
2818                         # OK
2819                         ;;
2820                 *)
2821                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2822                         exit 1
2823                         ;;
2824                 esac
2825
2826                 case "$with_schedule" in
2827                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2828                         # OK
2829                         ;;
2830                 *)
2831                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2832                         exit 1
2833                         ;;
2834                 esac
2835                 ;;
2836
2837         i[34567]86-*-* | x86_64-*-*)
2838                 supported_defaults="arch cpu tune"
2839                 for which in arch cpu tune; do
2840                         eval "val=\$with_$which"
2841                         case ${val} in
2842                         i386 | i486 \
2843                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2844                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2845                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2846                         | athlon-4 | athlon-xp | athlon-mp \
2847                         | prescott | pentium-m | pentium4m | pentium3m)
2848                                 case "${target}" in
2849                                   x86_64-*-*)
2850                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2851                                       exit 1
2852                                       ;;
2853                                 esac
2854                                 # OK
2855                                 ;;
2856                         "" | k8 | opteron | athlon64 | athlon-fx | nocona | generic)
2857                                 # OK
2858                                 ;;
2859                         *)
2860                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2861                                 exit 1
2862                                 ;;
2863                         esac
2864                 done
2865                 ;;
2866
2867         mips*-*-*)
2868                 supported_defaults="abi arch float tune divide"
2869
2870                 case ${with_float} in
2871                 "" | soft | hard)
2872                         # OK
2873                         ;;
2874                 *)
2875                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2876                         exit 1
2877                         ;;
2878                 esac
2879
2880                 case ${with_abi} in
2881                 "" | 32 | o64 | n32 | 64 | eabi)
2882                         # OK
2883                         ;;
2884                 *)
2885                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2886                         exit 1
2887                         ;;
2888                 esac
2889
2890                 case ${with_divide} in
2891                 "" | breaks | traps)
2892                         # OK
2893                         ;;
2894                 *)
2895                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2896                         exit 1
2897                 esac
2898                 ;;
2899
2900         mt-*-*)
2901                 supported_defaults="arch"
2902
2903                 case "$with_arch" in
2904                 "" \
2905                 | ms1-64-001 \
2906                 | ms1-16-002 \
2907                 | ms1-16-003 \
2908                 | ms2 \
2909                 | "")
2910                         # OK
2911                         ;;
2912                 *)
2913                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2914                         exit 1
2915                         ;;
2916                 esac
2917                 ;;
2918
2919         powerpc*-*-* | rs6000-*-*)
2920                 supported_defaults="cpu float tune"
2921
2922                 for which in cpu tune; do
2923                         eval "val=\$with_$which"
2924                         case ${val} in
2925                         default32 | default64)
2926                                 with_which="with_$which"
2927                                 eval $with_which=
2928                                 ;;
2929                         405cr)
2930                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2931                                 eval "with_$which=405"
2932                                 ;;
2933                         "" | common \
2934                         | power | power[23456] | power6x | powerpc | powerpc64 \
2935                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2936                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2937                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2938                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2939                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2940                                 # OK
2941                                 ;;
2942                         *)
2943                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2944                                 exit 1
2945                                 ;;
2946                         esac
2947                 done
2948                 ;;
2949
2950         s390*-*-*)
2951                 supported_defaults="arch mode tune"
2952
2953                 for which in arch tune; do
2954                         eval "val=\$with_$which"
2955                         case ${val} in
2956                         "" | g5 | g6 | z900 | z990 | z9-109)
2957                                 # OK
2958                                 ;;
2959                         *)
2960                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2961                                 exit 1
2962                                 ;;
2963                         esac
2964                 done
2965
2966                 case ${with_mode} in
2967                 "" | esa | zarch)
2968                         # OK
2969                         ;;
2970                 *)
2971                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2972                         exit 1
2973                         ;;
2974                 esac
2975                 ;;
2976
2977         sh[123456ble]-*-* | sh-*-*)
2978                 supported_defaults="cpu"
2979                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2980                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2981                         # OK
2982                         ;;
2983                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2984                         ;;
2985                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2986                         ;;
2987                 *)
2988                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2989                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2990                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2991                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2992                         exit 1
2993                         ;;
2994                 esac
2995                 ;;
2996         sparc*-*-*)
2997                 supported_defaults="cpu float tune"
2998
2999                 for which in cpu tune; do
3000                         eval "val=\$with_$which"
3001                         case ${val} in
3002                         "" | sparc | sparcv9 | sparc64 | sparc86x \
3003                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
3004                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3005                         | v9 | ultrasparc | ultrasparc3 | niagara)
3006                                 # OK
3007                                 ;;
3008                         *)
3009                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3010                                 exit 1
3011                                 ;;
3012                         esac
3013                 done
3014
3015                 case ${with_float} in
3016                 "" | soft | hard)
3017                         # OK
3018                         ;;
3019                 *)
3020                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3021                         exit 1
3022                         ;;
3023                 esac
3024                 ;;
3025
3026         v850*-*-*)
3027                 supported_defaults=cpu
3028                 case ${with_cpu} in
3029                 "" | v850e | v850e1)
3030                         # OK
3031                         ;;
3032                 *)
3033                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3034                         exit 1
3035                         ;;
3036                 esac
3037                 ;;
3038 esac
3039
3040 # Set some miscellaneous flags for particular targets.
3041 target_cpu_default2=
3042 case ${target} in
3043         alpha*-*-*)
3044                 if test x$gas = xyes
3045                 then
3046                         target_cpu_default2="MASK_GAS"
3047                 fi
3048                 ;;
3049
3050         arm*-*-*)
3051                 if test x$target_cpu_cname = x
3052                 then
3053                         target_cpu_default2=TARGET_CPU_generic
3054                 else
3055                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3056                 fi
3057                 ;;
3058
3059         hppa*-*-* | parisc*-*-*)
3060                 target_cpu_default2="MASK_BIG_SWITCH"
3061                 if test x$gas = xyes
3062                 then
3063                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3064                 fi
3065                 ;;
3066
3067         m680[012]0-*-* | m68k*-*-*)
3068                 target_cpu_default2=$m68k_cpu_ident
3069                 ;;
3070
3071         mips*-*-*)
3072                 if test x$gnu_ld = xyes
3073                 then
3074                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3075                 fi
3076                 case ${target} in
3077                         mips*el-*-*)
3078                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3079                                 ;;
3080                 esac
3081                 if test "x$enable_gofast" = xyes
3082                 then
3083                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3084                         tmake_file="mips/t-gofast $tmake_file"
3085                 else
3086                         tmake_file="mips/t-mips $tmake_file"
3087                 fi
3088                 ;;
3089
3090         powerpc*-*-* | rs6000-*-*)
3091                 # FIXME: The PowerPC port uses the value set at compile time,
3092                 # although it's only cosmetic.
3093                 if test "x$with_cpu" != x
3094                 then
3095                         target_cpu_default2="\\\"$with_cpu\\\""
3096                 fi
3097                 out_file=rs6000/rs6000.c
3098                 c_target_objs="${c_target_objs} rs6000-c.o"
3099                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3100                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3101
3102                 if test x$enable_e500_double = xyes
3103                 then
3104                         tm_file="$tm_file rs6000/e500-double.h"
3105                 fi
3106                 ;;
3107
3108         sh[123456ble]*-*-* | sh-*-*)
3109                 c_target_objs="${c_target_objs} sh-c.o"
3110                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3111                 ;;
3112
3113         sparc*-*-*)
3114                 # Some standard aliases.
3115                 case x$with_cpu in
3116                 xsparc)
3117                         with_cpu=v7
3118                         ;;
3119                 xsparcv9 | xsparc64)
3120                         with_cpu=v9
3121                         ;;
3122                 esac
3123
3124                 # The SPARC port checks this value at compile-time.
3125                 target_cpu_default2="TARGET_CPU_$with_cpu"
3126                 ;;
3127         v850*-*-*)
3128                 # FIXME: The v850 is "special" in that it does not support
3129                 # runtime CPU selection, only --with-cpu.
3130                 case "x$with_cpu" in
3131                 x)
3132                         ;;
3133                 xv850e)
3134                         target_cpu_default2="TARGET_CPU_$with_cpu"
3135                         ;;
3136                 esac
3137                 ;;
3138 esac
3139
3140 t=
3141 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3142 for option in $all_defaults
3143 do
3144         eval "val=\$with_$option"
3145         if test -n "$val"; then
3146                 case " $supported_defaults " in
3147                 *" $option "*)
3148                         ;;
3149                 *)
3150                         echo "This target does not support --with-$option." 2>&1
3151                         echo "Valid --with options are: $supported_defaults" 2>&1
3152                         exit 1
3153                         ;;
3154                 esac
3155
3156                 if test "x$t" = x
3157                 then
3158                         t="{ \"$option\", \"$val\" }"
3159                 else
3160                         t="${t}, { \"$option\", \"$val\" }"
3161                 fi
3162         fi
3163 done
3164
3165 if test "x$t" = x
3166 then
3167         configure_default_options="{ { NULL, NULL} }"
3168 else
3169         configure_default_options="{ ${t} }"
3170 fi
3171
3172 if test "$target_cpu_default2" != ""
3173 then
3174         if test "$target_cpu_default" != ""
3175         then
3176                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3177         else
3178                 target_cpu_default=$target_cpu_default2
3179         fi
3180 fi