1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
3 # Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING. If not, write to the Free
19 #Software Foundation, 59 Temple Place - Suite 330, Boston, MA
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files. This is invoked by the autoconf-generated
25 # configure script. Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
28 # This file switches on the shell variable ${target}, and also uses the
29 # following shell variables:
31 # with_* Various variables as set by configure.
33 # enable_threads Either the name, yes or no depending on whether
34 # threads support was requested.
36 # default_use_cxa_atexit
37 # "no" by default, can be set to "yes" if a target
38 # wishes to use __cxa_atexit() by default if the
39 # $enable___cxa_atexit variable is not set.
41 # gas_flag Either yes or no depending on whether GNU as was
44 # gnu_ld_flag Either yes or no depending on whether GNU ld was
47 # This file sets the following shell variables for use by the
48 # autoconf-generated configure script:
50 # cpu_type The name of the cpu, if different from the first
51 # chunk of the canonical target name.
53 # tm_defines List of target macros to define for all compilations.
55 # tm_file A list of target macro files, if different from
56 # "$cpu_type/$cpu_type.h". Usually it's constructed
57 # per target in a way like this:
58 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
59 # Note that the preferred order is:
60 # - specific target header "${cpu_type}/${cpu_type.h}"
61 # - generic headers like dbxelf.h elfos.h, etc.
62 # - specializing target headers like ${cpu_type.h}/elf.h
63 # This helps to keep OS specific stuff out of the CPU
64 # defining header ${cpu_type}/${cpu_type.h}.
66 # tm_p_file Location of file with declarations for functions
69 # out_file The name of the machine description C support
70 # file, if different from "$cpu_type/$cpu_type.c".
72 # md_file The name of the machine-description file, if
73 # different from "$cpu_type/$cpu_type.md".
75 # tmake_file A list of machine-description-specific
76 # makefile-fragments, if different from
77 # "$cpu_type/t-$cpu_type".
79 # extra_modes The name of the file containing a list of extra
80 # machine modes, if necessary and different from
81 # "$cpu_type/$cpu_type-modes.def".
83 # extra_objs List of extra objects that should be linked into
84 # the compiler proper (cc1, cc1obj, cc1plus)
85 # depending on target.
87 # extra_gcc_objs List of extra objects that should be linked into
88 # the compiler driver (gcc) depending on target.
90 # extra_headers List of used header files from the directory
93 # extra_passes List of extra executables compiled for this target
94 # machine, used for compiling from source to object.
96 # extra_parts List of extra object files that should be compiled
97 # for this target machine.
99 # extra_programs Like extra_passes, but these are used when linking.
101 # extra_options List of target-dependent .opt files.
103 # c_target_objs List of extra target-dependent objects that be
104 # linked into the C compiler only.
106 # cxx_target_objs List of extra target-dependent objects that be
107 # linked into the C++ compiler only.
109 # target_gtfiles List of extra source files with type information.
111 # xm_defines List of macros to define when compiling for the
114 # xm_file List of files to include when compiling for the
117 # use_collect2 Set to yes or no, depending on whether collect2
120 # target_cpu_default Set to override the default target model.
122 # gdb_needs_out_file_path
123 # Set to yes if gdb needs a dir command with
124 # `dirname $out_file`.
126 # thread_file Set to control which thread package to use.
128 # gas Set to yes or no depending on whether the target
129 # system normally uses GNU as.
131 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
132 # for this target. This is true iff this target
133 # supports "long" or "wchar_t" wider than 32 bits.
135 # configure_default_options
136 # Set to an initializer for configure_default_options
137 # in configargs.h, based on --with-cpu et cetera.
139 # use_fixproto Set to "yes" if fixproto should be run normally,
140 # "no" if fixproto should never be run.
142 # The following variables are used in each case-construct to build up the
143 # outgoing variables:
145 # gnu_ld Set to yes or no depending on whether the target
146 # system normally uses GNU ld.
161 # Set this to force installation and use of collect2.
163 # Set this to override the default target model.
165 # Set this if gdb needs a dir command with `dirname $out_file`
166 gdb_needs_out_file_path=
167 # Set this to control which thread package will be used.
169 # Reinitialize these from the flag values every loop pass, since some
170 # configure entries modify them.
172 gnu_ld="$gnu_ld_flag"
173 default_use_cxa_atexit=no
177 # Default to not using fixproto. Targets which need fixproto should
178 # specifically set this to 'yes'.
181 # Don't carry these over build->host->target. Please.
185 # Obsolete configurations.
190 | ns32k-*-netbsdelf* \
195 if test "x$enable_obsolete" != xyes; then
196 echo "*** Configuration ${target} is obsolete." >&2
197 echo "*** Specify --enable-obsolete to build it anyway." >&2
198 echo "*** Support will be REMOVED in the next major release of GCC," >&2
199 echo "*** unless a maintainer comes forward." >&2
204 # Unsupported targets list. Do not put an entry in this list unless
205 # it would otherwise be caught by a more permissive pattern. The list
206 # should be in alphabetical order.
208 alpha*-*-linux*libc1* \
209 | i[34567]86-sequent-sysv \
210 | i[34567]86-sequent-sysv[123]* \
211 | i[34567]86-go32-* \
212 | i[34567]86-*-go32* \
213 | m68k-*-linux*aout* \
214 | m68k-*-linux*libc1* \
215 | mips64orion*-*-rtems* \
216 | powerpc-*-linux*libc1* \
217 | sparc-*-linux*aout* \
218 | sparc-*-linux*libc1* \
219 | sparc-hal-solaris2* \
227 echo "*** Configuration ${target} not supported" 1>&2
232 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
233 # updated in each machine entry. Also set default extra_headers for some
236 cpu_type=`echo ${target} | sed 's/-.*$//'`
251 extra_headers="mmintrin.h"
261 extra_headers="mmintrin.h"
265 extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
269 extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
273 extra_headers=ia64intrin.h
276 hppa*-*-* | parisc*-*-*)
284 extra_headers=math-68881.h
287 extra_headers=math-68881.h
295 extra_headers="ppc-asm.h altivec.h spe.h"
298 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345]|xrs64a)
317 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
318 sh[123456789lbe]*-*-*)
327 tm_file=${cpu_type}/${cpu_type}.h
328 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
330 tm_p_file=${cpu_type}/${cpu_type}-protos.h
333 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
335 extra_modes=${cpu_type}/${cpu_type}-modes.def
337 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
339 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
344 tm_file="i386/biarch64.h ${tm_file}"
348 # On a.out targets, we need to use collect2.
355 # Common parts for widely ported systems.
359 *-darwin1[0-9]*) tm_file="${tm_file} darwin8.h" ;;
361 *-darwin7*) tm_file="${tm_file} darwin7.h" ;;
362 *) tm_file="${tm_file} darwin8.h" ;;
364 tm_file="${tm_file} darwin.h"
365 tm_p_file="${tm_p_file} darwin-protos.h"
366 tmake_file="t-darwin t-slibgcc-darwin"
367 target_gtfiles="\$(srcdir)/config/darwin.c"
368 extra_options="${extra_options} darwin.opt"
369 c_target_objs="darwin-c.o"
370 cxx_target_objs="darwin-c.o"
372 extra_objs="darwin.o"
373 case ${enable_threads} in
374 "" | yes | posix) thread_file='posix' ;;
377 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
378 # This is the place-holder for the generic a.out configuration
379 # of FreeBSD. No actual configuration resides here since
380 # there was only ever a bare-bones ix86 configuration for
381 # a.out and it exists solely in the machine-specific section.
382 # This place-holder must exist to avoid dropping into
383 # the generic ELF configuration of FreeBSD (i.e. it must be
384 # ordered before that section).
387 # This is the generic ELF configuration of FreeBSD. Later
388 # machine-specific sections may refine and add to this
391 # Due to tm_file entry ordering issues that vary between cpu
392 # architectures, we only define fbsd_tm_file to allow the
393 # machine-specific section to dictate the final order of all
394 # entries of tm_file with the minor exception that components
395 # of the tm_file set here will always be of the form:
397 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
399 # The machine-specific section should not tamper with this
400 # ordering but may order all other entries of tm_file as it
401 # pleases around the provided core setting.
404 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
406 *-*-freebsd3 | *-*-freebsd[3].*)
407 tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
408 *-*-freebsd4 | *-*-freebsd[4].*)
409 tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
410 *-*-freebsd5 | *-*-freebsd[5].*)
411 tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
412 *-*-freebsd6 | *-*-freebsd[6].*)
413 tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
415 echo 'Please update *-*-freebsd* in gcc/config.gcc'
419 tmake_file="t-slibgcc-elf-ver t-freebsd"
420 case ${enable_threads} in
422 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
426 tmake_file="${tmake_file} t-freebsd-thread"
427 # Before 5.0, FreeBSD can't bind shared libraries to -lc
428 # when "optionally" threaded via weak pthread_* checks.
430 *-*-freebsd[34] | *-*-freebsd[34].*)
431 tmake_file="${tmake_file} t-slibgcc-nolc-override"
436 echo 'Unknown thread configuration for FreeBSD'
440 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
442 *-*-linux*libc1* | *-*-linux*aout*)
443 # Avoid the generic linux case.
445 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
446 # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
447 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
450 case ${enable_threads} in
451 "" | yes | posix) thread_file='posix' ;;
453 tmake_file="t-slibgcc-elf-ver t-linux"
456 # On the Hurd, the setup is just about the same on
457 # each different CPU. The specific machines that we
458 # support are matched above and just set $cpu_type.
459 tm_file="${cpu_type}/gnu.h"
460 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
461 # GNU tools are the only tools.
464 # These details are the same as for Linux.
465 # But here we need a little extra magic.
466 tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
469 tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
472 tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
477 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
481 # NetBSD 2.0 and later get POSIX threads enabled by default.
482 # Allow them to be explicitly enabled on any other version.
483 case ${enable_threads} in
486 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
488 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
494 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
498 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
499 # ELF configurations. We will clear extra_parts in the
500 # a.out configurations.
502 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
503 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
507 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
508 # default (unless overridden by --disable-__cxa_atexit).
510 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
511 default_use_cxa_atexit=yes
516 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
517 case ${enable_threads} in
520 tmake_file="${tmake_file} t-openbsd-thread"
524 *-*-openbsd2.*|*-*-openbsd3.[012])
525 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
529 case ${enable_threads} in
530 yes) thread_file='rtems' ;;
535 tm_file="${tm_file} elfos.h svr4.h vxworks.h"
536 case ${enable_threads} in
538 "" | yes | vxworks) thread_file='vxworks' ;;
539 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
547 # Support site-specific machine types.
549 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
550 tm_file=${cpu_type}/$rest.h
551 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
552 then xm_file=${cpu_type}/xm-$rest.h
554 if test -f $srcdir/config/${cpu_type}/t-$rest
555 then tmake_file=${cpu_type}/t-$rest
560 tm_file="${tm_file} alpha/unicosmk.h"
562 # Don't include t-ieee for now because we don't support that yet
563 # tmake_file="alpha/t-ieee"
564 tmake_file="alpha/t-unicosmk"
568 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
569 target_cpu_default="MASK_GAS"
570 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
573 target_cpu_default="MASK_GAS"
574 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
577 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
578 target_cpu_default="MASK_GAS"
579 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
580 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
583 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
584 target_cpu_default="MASK_GAS"
585 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
588 tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
589 tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
590 # default x-alpha is only appropriate for dec-osf.
591 target_cpu_default="MASK_GAS"
592 tmake_file="alpha/t-alpha alpha/t-ieee"
595 if test x$stabs = xyes
597 tm_file="${tm_file} dbx.h"
599 if test x$gas != xyes
601 extra_passes="mips-tfile mips-tdump"
604 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
605 tm_file="${tm_file} alpha/osf.h"
606 extra_headers=va_list.h
609 # Define TARGET_SUPPORT_ARCH except on 4.0a.
612 *) tm_defines="TARGET_SUPPORT_ARCH=1"
616 tm_file="${tm_file} alpha/osf5.h"
617 tm_defines="TARGET_SUPPORT_ARCH=1"
620 case ${enable_threads} in
623 tmake_file="${tmake_file} alpha/t-osf-pthread"
628 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
629 xm_file="alpha/xm-vms.h"
630 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
635 tm_file="${tm_file} alpha/vms.h"
636 xm_file=alpha/xm-vms.h
637 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
642 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
643 extra_parts="crtinit.o crtfini.o"
646 arm-*-coff* | armel-*-coff*)
647 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
648 tmake_file="arm/t-arm arm/t-arm-coff"
650 arm-semi-aof | armel-semi-aof)
651 tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
652 tmake_file="arm/t-arm arm/t-semi"
655 tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
656 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
658 arm*-*-freebsd*|strongarm*-*-freebsd*)
659 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
660 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
663 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
664 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
667 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
668 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
672 arm*-*-linux*) # ARM GNU/Linux with ELF
673 tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
674 tmake_file="${tmake_file} arm/t-arm arm/t-linux"
675 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
678 arm*-*-uclinux*) # ARM ucLinux
679 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
680 tmake_file="arm/t-arm arm/t-arm-elf"
683 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
684 tmake_file="arm/t-arm arm/t-arm-elf"
686 arm*-*-eabi* | arm*-*-symbianelf* )
687 # The BPABI long long divmod functions return a 128-bit value in
688 # registers r0-r3. Correctly modeling that requires the use of
691 default_use_cxa_atexit=yes
692 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
693 tmake_file="arm/t-arm arm/t-arm-elf"
696 tmake_file="${tmake_file} arm/t-bpabi"
699 tm_file="${tm_file} arm/symbian.h"
700 # We do not include t-bpabi for Symbian OS because the system
701 # provides its own implementation of the BPABI functions.
702 tmake_file="${tmake_file} t-slibgcc-elf-ver arm/t-symbian"
705 tm_file="${tm_file} arm/aout.h arm/arm.h"
708 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
709 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
711 arm*-*-elf | ep9312-*-elf)
712 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
713 tmake_file="arm/t-arm arm/t-arm-elf"
716 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
717 tmake_file="arm/t-arm arm/t-wince-pe"
718 extra_options="${extra_options} arm/pe.opt"
722 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
723 tmake_file="arm/t-arm arm/t-pe"
724 extra_options="${extra_options} arm/pe.opt"
728 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
729 tmake_file="arm/t-arm arm/t-arm-elf"
732 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
733 tmake_file="avr/t-avr t-rtems avr/t-rtems"
736 tm_file="avr/avr.h dbxelf.h"
740 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
741 tmake_file=bfin/t-bfin-elf
745 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
746 tmake_file=bfin/t-bfin
749 c4x-*-rtems* | tic4x-*-rtems*)
750 tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
751 tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
752 c_target_objs="c4x-c.o"
753 cxx_target_objs="c4x-c.o"
757 c_target_objs="c4x-c.o"
758 cxx_target_objs="c4x-c.o"
761 tm_file="dbxelf.h ${tm_file} cris/aout.h"
763 tmake_file="cris/t-cris cris/t-aout"
764 extra_options="${extra_options} cris/aout.opt"
766 cris-*-elf | cris-*-none)
767 tm_file="dbxelf.h elfos.h ${tm_file}"
768 tmake_file="cris/t-cris cris/t-elfmulti"
770 extra_options="${extra_options} cris/elf.opt"
773 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
774 # We need to avoid using t-linux, so override default tmake_file
775 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
776 extra_options="${extra_options} cris/linux.opt"
779 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
780 tmake_file=fr30/t-fr30
781 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
785 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
790 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
791 linux.h frv/linux.h frv/frv-abi.h"
792 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
795 tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
796 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
799 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
800 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
803 tmake_file="h8300/t-h8300 h8300/t-elf"
804 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
808 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
811 hppa*64*-*-linux* | parisc*64*-*-linux*)
812 target_cpu_default="MASK_PA_11|MASK_PA_20"
813 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
814 pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
815 tmake_file="${tmake_file} pa/t-linux64"
819 hppa*-*-linux* | parisc*-*-linux*)
820 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
821 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
822 pa/pa32-regs.h pa/pa32-linux.h"
823 tmake_file="${tmake_file} pa/t-linux"
824 # if not configured with --enable-sjlj-exceptions, bump the
825 # libgcc version number
826 if test x$sjlj != x1; then
827 tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
830 # port not yet contributed.
832 # target_cpu_default="MASK_PA_11"
835 target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
836 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
837 pa/pa-pro-end.h libgloss.h"
838 tmake_file="pa/t-pro"
841 target_cpu_default="MASK_PA_11"
842 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
847 target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
848 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
849 pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
850 tmake_file="pa/t-pro t-rtems"
853 target_cpu_default="MASK_PA_11"
854 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
860 hppa1.1-*-* | hppa2*-*-*)
861 target_cpu_default="MASK_PA_11"
864 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
865 pa/pa-hpux.h pa/pa-hpux10.h"
866 extra_options="${extra_options} pa/pa-hpux.opt"
869 tm_file="${tm_file} pa/pa-hpux1010.h"
870 extra_options="${extra_options} pa/pa-hpux1010.opt"
873 tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
874 case ${enable_threads} in
876 if test x$have_pthread_h = xyes ; then
877 tmake_file="${tmake_file} pa/t-dce-thr"
881 tmake_file="${tmake_file} pa/t-dce-thr"
888 target_cpu_default="MASK_PA_11|MASK_PA_20"
889 if test x$gnu_ld = xyes
891 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
895 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
896 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
899 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
900 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
905 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
906 extra_options="${extra_options} pa/pa-hpux1111.opt"
909 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
912 extra_options="${extra_options} pa/pa-hpux.opt \
913 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
915 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
916 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
917 case x${enable_threads} in
925 hppa1.1-*-* | hppa2*-*-*)
926 target_cpu_default="MASK_PA_11"
929 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
930 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
931 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
934 tm_file="${tm_file} pa/pa-hpux1111.h"
935 extra_options="${extra_options} pa/pa-hpux1111.opt"
938 tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
939 case x${enable_threads} in
946 i[34567]86-*-darwin*)
947 tm_file="${tm_file} i386/darwin.h"
950 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
951 tmake_file="i386/t-i386elf t-svr4"
954 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
957 tm_file="${tm_file} usegas.h"
959 xm_defines="SMALL_ARG_MAX"
960 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
962 extra_parts="crtbegin.o crtend.o"
966 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
969 i[34567]86-*-beoself* | i[34567]86-*-beos*)
970 tmake_file='i386/t-beos i386/t-crtpic'
971 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
972 extra_parts='crtbegin.o crtend.o'
974 i[34567]86-*-freebsd*)
975 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
978 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
980 i[34567]86-*-netbsdelf*)
981 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
983 i[34567]86-*-netbsd*)
984 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
990 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
992 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
993 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
994 # needed to unconfuse gdb
995 tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
996 # we need collect2 until our bug is fixed...
999 i[34567]86-*-openbsd*)
1000 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1001 tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1006 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1009 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1010 # Intel 80386's running GNU/*
1011 # with ELF format using glibc 2
1012 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1014 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1015 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1017 tmake_file="${tmake_file} i386/t-crtstuff"
1019 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1020 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1021 i386/x86-64.h i386/linux64.h"
1023 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1024 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1026 tmake_file="${tmake_file} i386/t-linux64"
1030 i[34567]86-pc-msdosdjgpp*)
1031 xm_file=i386/xm-djgpp.h
1032 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1033 tmake_file=i386/t-djgpp
1034 extra_options="${extra_options} i386/djgpp.opt"
1038 i[34567]86-*-lynxos*)
1040 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1041 tmake_file="i386/t-crtstuff t-lynx"
1042 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1043 extra_options="${extra_options} lynx.opt"
1048 i[3456x]86-*-netware*)
1049 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1050 tmake_file=i386/t-netware
1051 extra_objs=netware.o
1054 extra_objs="$extra_objs nwld.o"
1055 tm_file="${tm_file} i386/nwld.h"
1056 tmake_file="${tmake_file} i386/t-nwld"
1057 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1060 case x${enable_threads} in
1061 x | xyes | xposix) thread_file='posix';;
1062 xnks) thread_file='nks';;
1064 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1067 i[34567]86-*-nto-qnx*)
1068 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1069 tmake_file=i386/t-nto
1073 i[34567]86-*-rtems*)
1074 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1075 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1076 tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1078 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1079 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1080 if test x$gas = xyes
1082 tm_file="usegas.h ${tm_file}"
1084 tmake_file=i386/t-sco5
1085 extra_parts="crtbegin.o crtend.o"
1086 extra_options="${extra_options} i386/sco5.opt"
1089 i[34567]86-*-solaris2*)
1090 xm_defines="SMALL_ARG_MAX"
1091 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1093 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1094 tm_file="${tm_file} sol26.h"
1096 tm_file="${tm_file} i386/sol2.h"
1097 tmake_file="t-sol2 i386/t-sol2 t-svr4"
1098 c_target_objs="sol2-c.o"
1099 cxx_target_objs="sol2-c.o"
1101 tm_p_file="${tm_p_file} sol2-protos.h"
1102 if test x$gnu_ld = xyes; then
1103 tmake_file="$tmake_file t-slibgcc-elf-ver"
1104 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1106 tmake_file="$tmake_file t-slibgcc-sld"
1109 *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1110 tm_file="$tm_file tm-dwarf2.h"
1114 *-*-solaris2.1[0-9]*)
1115 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1116 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1117 tmake_file="$tmake_file i386/t-sol2-10"
1118 need_64bit_hwint=yes
1119 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1120 # part of the base system.
1121 extra_parts="gmon.o crtbegin.o crtend.o"
1124 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1127 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1128 "":yes:* | yes:yes:* )
1130 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1138 "":*:yes | yes:*:yes )
1143 i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
1144 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1145 if test x$stabs = xyes
1147 tm_file="${tm_file} dbx.h"
1149 tmake_file="i386/t-crtpic t-svr4"
1150 extra_parts="crtbegin.o crtend.o"
1151 if test x$enable_threads = xyes; then
1156 i[34567]86-*-sysv4*) # Intel 80386's running system V.4
1157 xm_defines="SMALL_ARG_MAX"
1158 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1159 if test x$stabs = xyes
1161 tm_file="${tm_file} dbx.h"
1163 tmake_file="i386/t-crtpic t-svr4"
1164 extra_parts="crtbegin.o crtend.o"
1167 i[4567]86-wrs-vxworks)
1168 tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
1169 tmake_file="${tmake_file} i386/t-vxworks"
1171 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1172 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1173 xm_file=i386/xm-cygwin.h
1174 tmake_file="i386/t-cygwin i386/t-cygming"
1175 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1176 extra_options="${extra_options} i386/cygming.opt"
1178 c_target_objs=cygwin2.o
1179 cxx_target_objs=cygwin2.o
1180 extra_gcc_objs=cygwin1.o
1181 if test x$enable_threads = xyes; then
1185 i[34567]86-*-mingw32*)
1186 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1187 xm_file=i386/xm-mingw32.h
1188 tmake_file="i386/t-cygming i386/t-mingw32"
1189 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1190 extra_options="${extra_options} i386/cygming.opt"
1192 case ${enable_threads} in
1193 "" | yes | win32) thread_file='win32' ;;
1197 tm_file="${tm_file} i386/crtdll.h"
1199 *mingw32msv* | *mingw32*)
1204 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1205 tmake_file="i386/t-cygwin i386/t-uwin"
1207 extra_options="${extra_options} i386/cygming.opt"
1208 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1209 if test x$enable_threads = xyes; then
1214 i[34567]86-*-interix3*)
1215 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1216 tmake_file="i386/t-interix"
1218 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1219 if test x$enable_threads = xyes ; then
1222 if test x$stabs = xyes ; then
1223 tm_file="${tm_file} dbxcoff.h"
1227 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1228 tmake_file="i386/t-i386elf t-svr4"
1231 tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h"
1232 tmake_file="i860/t-i860 i860/t-svr4"
1233 extra_parts="crtbegin.o crtend.o"
1237 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1238 tmake_file="ia64/t-ia64"
1239 target_cpu_default="0"
1240 if test x$gas = xyes
1242 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1244 if test x$gnu_ld = xyes
1246 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1248 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1252 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1253 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1254 tmake_file="${tmake_file} ia64/t-ia64"
1255 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1258 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1259 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1260 if test x$with_system_libunwind != xyes ; then
1261 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1263 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1264 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1267 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1268 tmake_file="ia64/t-ia64 ia64/t-hpux"
1269 target_cpu_default="MASK_GNU_AS"
1270 case x$enable_threads in
1276 c_target_objs="ia64-c.o"
1277 cxx_target_objs="ia64-c.o"
1278 extra_options="${extra_options} ia64/ilp32.opt"
1279 # If we decide to run fixproto we should define FIXPROTO_DEFINES
1280 # in ia64/t-hpux, and also fix the definition of putenv in
1281 # sys-protos.h (const char not char).
1284 tm_file="elfos.h ${tm_file}"
1288 tm_file="svr4.h elfos.h iq2000/iq2000.h"
1289 tmake_file=iq2000/t-iq2000
1290 out_file=iq2000/iq2000.c
1291 md_file=iq2000/iq2000.md
1295 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1296 extra_parts="crtinit.o crtfini.o"
1300 tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1301 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1305 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1306 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1307 # We override the tmake_file for linux -- why?
1308 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1311 if test x$enable_threads = xyes; then
1316 tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1317 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1318 # We override the tmake_file for linux -- why?
1319 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1322 if test x$enable_threads = xyes; then
1326 # m68hc11 and m68hc12 share the same machine description.
1327 m68hc11-*-*|m6811-*-*)
1328 tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1329 tm_p_file="m68hc11/m68hc11-protos.h"
1330 md_file="m68hc11/m68hc11.md"
1331 out_file="m68hc11/m68hc11.c"
1332 tmake_file="m68hc11/t-m68hc11-gas"
1335 m68hc12-*-*|m6812-*-*)
1336 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1337 tm_p_file="m68hc11/m68hc11-protos.h"
1338 md_file="m68hc11/m68hc11.md"
1339 out_file="m68hc11/m68hc11.c"
1340 tmake_file="m68hc11/t-m68hc11-gas"
1341 extra_options="${extra_options} m68hc11/m68hc11.opt"
1345 tmake_file=m68k/t-m68kbare
1346 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1349 tmake_file=m68k/t-m68kbare
1350 tm_defines="MOTOROLA USE_GAS"
1351 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1354 m68020-*-elf* | m68k-*-elf*)
1355 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1356 tm_defines="MOTOROLA USE_GAS"
1357 tmake_file=m68k/t-m68kelf
1358 extra_parts="crtbegin.o crtend.o"
1361 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1362 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1363 tm_defines="MOTOROLA USE_GAS"
1366 target_cpu_default="0"
1369 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1374 # needed to unconfuse gdb
1375 tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1376 tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1377 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1378 # we need collect2 until our bug is fixed...
1381 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc
1382 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1383 tm_defines="MOTOROLA USE_GAS"
1384 tmake_file=m68k/t-uclinux
1387 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1388 # with ELF format using glibc 2
1389 # aka the GNU/Linux C library 6.
1390 tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1391 extra_options="${extra_options} m68k/ieee.opt"
1392 tm_defines="MOTOROLA USE_GAS"
1393 # if not configured with --enable-sjlj-exceptions, bump the
1394 # libgcc version number
1395 if test x$sjlj != x1; then
1396 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1400 tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1401 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1402 tm_defines="MOTOROLA USE_GAS"
1403 extra_parts="crtbegin.o crtend.o"
1406 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1407 tmake_file=mcore/t-mcore
1411 tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1412 tmake_file=mcore/t-mcore-pe
1416 tm_file="elfos.h ${tm_file} mips/iris.h"
1417 tmake_file="mips/t-iris mips/t-slibgcc-irix"
1418 target_cpu_default="MASK_ABICALLS"
1421 tm_file="${tm_file} mips/iris5.h"
1425 tm_file="${tm_file} mips/iris6.h"
1426 tmake_file="${tmake_file} mips/t-iris6"
1427 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1430 if test "x$stabs" = xyes
1432 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1434 if test "x$gnu_ld" = xyes
1436 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1438 # if test x$enable_threads = xyes; then
1439 # thread_file='irix'
1443 mips*-*-netbsd*) # NetBSD/mips, either endian.
1444 target_cpu_default="MASK_ABICALLS"
1445 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1448 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1449 tmake_file="${tmake_file} mips/t-linux64"
1450 tm_defines="MIPS_ABI_DEFAULT=ABI_N32"
1454 mips*-*-linux*) # Linux MIPS, either endian.
1455 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1458 target_cpu_default="MASK_SOFT_FLOAT"
1459 tm_defines="MIPS_ISA_DEFAULT=32"
1464 tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1465 target_cpu_default="MASK_ABICALLS"
1466 tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1469 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1470 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1473 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1474 tm_file="elfos.h ${tm_file} mips/elf.h"
1475 tmake_file=mips/t-isa3264
1476 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1479 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1480 tm_file="elfos.h ${tm_file} mips/elf.h"
1481 tmake_file=mips/t-isa3264
1482 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1485 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1486 tm_file="elfos.h ${tm_file} mips/elf.h"
1487 tmake_file=mips/t-isa3264
1488 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1489 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1492 mipsisa64sr71k-*-elf*)
1493 tm_file="elfos.h ${tm_file} mips/elf.h"
1494 tmake_file=mips/t-sr71k
1495 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1496 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1499 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1500 tm_file="elfos.h ${tm_file} mips/elf.h"
1501 tmake_file=mips/t-elf
1502 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1503 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1506 mips-*-elf* | mipsel-*-elf*)
1507 tm_file="elfos.h ${tm_file} mips/elf.h"
1508 tmake_file=mips/t-elf
1511 mips64-*-elf* | mips64el-*-elf*)
1512 tm_file="elfos.h ${tm_file} mips/elf.h"
1513 tmake_file=mips/t-elf
1514 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1515 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1518 mips64vr-*-elf* | mips64vrel-*-elf*)
1519 tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1520 tmake_file=mips/t-vr
1523 mips64orion-*-elf* | mips64orionel-*-elf*)
1524 tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1525 tmake_file=mips/t-elf
1526 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1527 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1531 tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1532 tmake_file="mips/t-elf t-rtems mips/t-rtems"
1535 # We want vxworks.h after mips/elf.h, which unfortunately means we
1536 # have to redo the tm_file list from scratch.
1537 tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1538 tmake_file="${tmake_file} mips/t-vxworks"
1540 mips-wrs-windiss) # Instruction-level simulator for VxWorks.
1542 tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1543 tmake_file="${tmake_file} mips/t-elf"
1546 mipstx39-*-elf* | mipstx39el-*-elf*)
1547 tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1548 tmake_file=mips/t-r3900
1551 mmix-knuth-mmixware)
1552 need_64bit_hwint=yes
1555 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1556 if test x$stabs = xyes
1558 tm_file="${tm_file} dbx.h"
1564 echo "GCC does not yet support the ${target} target"; exit 1
1567 tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1568 # On NetBSD, the headers are already okay, except for math.h.
1569 tmake_file="t-netbsd ns32k/t-ns32k"
1574 tm_file="${tm_file} pdp11/2bsd.h"
1580 # port not yet contributed
1581 #powerpc-*-openbsd*)
1582 # tmake_file="${tmake_file} rs6000/t-fprules "
1586 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1587 test x$with_cpu != x || cpu_is_64bit=yes
1588 test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1589 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1590 tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1593 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1594 tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1597 tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1598 tmake_file="rs6000/t-fprules rs6000/t-beos"
1603 tm_file="${tm_file} rs6000/darwin.h"
1604 tmake_file="${tmake_file} rs6000/t-darwin"
1606 *-darwin1[0-9]*) tmake_file="${tmake_file} rs6000/t-darwin8" ;;
1608 *-darwin[8-9]*) tmake_file="${tmake_file} rs6000/t-darwin8" ;;
1610 extra_headers=altivec.h
1612 powerpc*-*-freebsd*)
1613 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1614 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1617 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1618 tmake_file="${tmake_file} rs6000/t-netbsd"
1620 powerpc-*-chorusos*)
1621 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1622 tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1623 case ${enable_threads} in
1631 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1632 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1634 powerpc-*-eabisimaltivec*)
1635 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1636 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1639 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1640 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1643 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1644 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1647 powerpc-*-eabialtivec*)
1648 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1649 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1652 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1653 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1656 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1657 tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1659 powerpc-*-linux*altivec*)
1660 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1661 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1663 powerpc-*-linux*spe*)
1664 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1665 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1668 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1669 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1670 case ${enable_targets}:${cpu_is_64bit} in
1671 *powerpc64* | all:* | *:yes)
1672 if test x$cpu_is_64bit = xyes; then
1673 tm_file="${tm_file} rs6000/default64.h"
1675 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1676 tmake_file="$tmake_file rs6000/t-linux64"
1679 tm_file="${tm_file} rs6000/linux.h"
1683 powerpc-*-gnu-gnualtivec*)
1684 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1685 tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1686 if test x$enable_threads = xyes; then
1691 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1692 tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1693 if test x$enable_threads = xyes; then
1697 powerpc-wrs-vxworks*)
1698 # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1699 # means we have to redo the tm_file list from scratch.
1700 tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1701 tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
1702 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1703 extra_headers=ppc-asm.h
1705 powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
1706 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1707 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1713 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1714 tmake_file="t-lynx rs6000/t-lynx"
1715 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1716 extra_options="${extra_options} lynx.opt"
1722 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1723 tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1727 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1728 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1731 powerpcle-*-eabisim*)
1732 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1733 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1736 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1737 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1740 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1741 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1744 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1745 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1747 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1748 tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1749 tmake_file="rs6000/t-fprules rs6000/t-newas"
1754 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1755 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1756 tmake_file=rs6000/t-aix43
1761 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1762 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1763 tmake_file=rs6000/t-aix43
1768 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1769 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1770 tmake_file=rs6000/t-aix52
1776 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1777 tmake_file="${tmake_file} s390/t-crtstuff"
1780 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1781 tm_p_file=s390/s390-protos.h
1782 md_file=s390/s390.md
1783 extra_modes=s390/s390-modes.def
1784 out_file=s390/s390.c
1785 tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
1788 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1789 tm_p_file=s390/s390-protos.h
1790 md_file=s390/s390.md
1791 extra_modes=s390/s390-modes.def
1792 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
1793 out_file=s390/s390.c
1794 tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
1797 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1798 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1799 sh-*-linux* | sh[346lbe]*-*-linux* | \
1800 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1801 sh64-*-netbsd* | sh64l*-*-netbsd*)
1802 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1803 if test x${with_endian} = x; then
1805 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1806 shbe-*-* | sheb-*-*) with_endian=big,little ;;
1807 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
1808 shl* | sh64l* | sh*-*-linux* | \
1809 sh5l* | sh-superh-elf) with_endian=little,big ;;
1810 sh[1234]*-*-*) with_endian=big ;;
1811 *) with_endian=big,little ;;
1814 case ${with_endian} in
1815 big|little) tmake_file="${tmake_file} sh/t-1e" ;;
1816 big,little|little,big) ;;
1817 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
1819 case ${with_endian} in
1820 little*) tm_file="sh/little.h ${tm_file}" ;;
1822 tm_file="${tm_file} dbxelf.h elfos.h"
1825 *) tm_file="${tm_file} svr4.h" ;;
1827 tm_file="${tm_file} sh/elf.h"
1829 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
1830 tm_file="${tm_file} linux.h sh/linux.h" ;;
1831 sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1833 sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1834 *) tm_file="${tm_file} sh/embed-elf.h" ;;
1838 # SHmedia, 32-bit ABI
1839 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1842 # SHmedia, 64-bit ABI
1843 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1846 tmake_file="${tmake_file} sh/t-netbsd"
1849 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1850 tm_file="${tm_file} sh/sh64.h"
1851 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1854 tmake_file="${tmake_file} sh/t-sh64"
1855 tm_file="${tm_file} sh/sh64.h"
1856 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1859 tmake_file="sh/t-symbian"
1860 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1861 extra_objs="symbian.o"
1862 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1865 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1866 case `echo ${target} | sed 's/e[lb]-/-/'` in
1867 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
1868 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1869 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
1870 sh4a_single*) sh_cpu_target=sh4a-single ;;
1871 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
1872 sh4al) sh_cpu_target=sh4al ;;
1873 sh4a*) sh_cpu_target=sh4a ;;
1874 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
1875 sh4_single*) sh_cpu_target=sh4-single ;;
1876 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
1877 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
1878 sh3e*) sh_cpu_target=sh3e ;;
1879 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
1880 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
1881 sh2a_single*) sh_cpu_target=sh2a-single ;;
1882 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
1883 sh2a*) sh_cpu_target=sh2a ;;
1884 sh2e*) sh_cpu_target=sh2e ;;
1885 sh2*) sh_cpu_target=sh2 ;;
1886 *) sh_cpu_target=sh1 ;;
1888 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
1889 case $sh_cpu_default in
1890 sh5-64media-nofpu | sh5-64media | \
1891 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
1892 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
1893 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
1894 sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
1895 sh3e | sh3 | sh2e | sh2 | sh1) ;;
1896 "") sh_cpu_default=${sh_cpu_target} ;;
1897 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
1899 sh_multilibs=${with_multilib_list}
1900 if test x${sh_multilibs} = x ; then
1902 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
1903 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
1904 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
1905 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
1906 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
1907 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
1910 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr a-z- A-Z_`
1911 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
1912 sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e s/^m/sh/ -e 's/ m/ sh/g' | tr A-Z_ a-z-`
1913 for sh_multilib in ${sh_multilibs}; do
1914 case ${sh_multilib} in
1915 sh1 | sh2 | sh2e | sh3 | sh3e | \
1916 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
1917 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
1918 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
1919 sh5-64media | sh5-64media-nofpu | \
1920 sh5-32media | sh5-32media-nofpu | \
1921 sh5-compact | sh5-compact-nofpu)
1922 tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
1923 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`"
1926 echo "with_multilib_list=${sh_multilib} not supported."
1931 if test x${enable_incomplete_targets} == xyes ; then
1932 tm_defines="$tm_defines SUPPORT_SH1 SUPPORT_SH2E SUPPORT_SH4 SUPPORT_SH4_SINGLE SUPPORT_SH2A SUPPORT_SH2A_SINGLE SUPPORT_SH5_32MEDIA SUPPORT_SH5_32MEDIA_NOFPU SUPPORT_SH5_64MEDIA SUPPORT_SH5_64MEDIA_NOFPU"
1937 tmake_file="sh/t-sh t-rtems sh/t-rtems"
1938 tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
1941 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
1942 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
1945 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
1946 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
1949 tm_file="${tm_file} dbxcoff.h sh/coff.h"
1953 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
1954 extra_options="${extra_options} sparc/long-double-switch.opt"
1957 tm_defines=OBSD_OLD_GAS
1958 tm_file="sparc/sparc.h openbsd.h sparc/openbsd.h"
1959 # needed to unconfuse gdb
1960 tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
1961 # we need collect2 until our bug is fixed...
1965 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
1966 extra_options="${extra_options} sparc/little-endian.opt"
1971 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
1972 tmake_file="sparc/t-elf sparc/t-crtfm"
1973 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1976 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
1977 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
1978 extra_options="${extra_options} sparc/long-double-switch.opt"
1979 tmake_file="${tmake_file} sparc/t-crtfm"
1982 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
1983 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
1984 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1986 sparc64-*-solaris2* | sparcv9-*-solaris2*)
1987 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h tm-dwarf2.h"
1988 if test x$gnu_ld = xyes; then
1989 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
1991 if test x$gas = xyes; then
1992 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
1994 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
1995 if test x$gnu_ld = xyes; then
1996 tmake_file="$tmake_file t-slibgcc-elf-ver"
1998 tmake_file="$tmake_file t-slibgcc-sld"
2000 c_target_objs="sol2-c.o"
2001 cxx_target_objs="sol2-c.o"
2003 tm_p_file="${tm_p_file} sol2-protos.h"
2004 extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2005 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2006 "":yes:* | yes:yes:* ) thread_file=posix ;;
2007 "":*:yes | yes:*:yes ) thread_file=solaris ;;
2009 need_64bit_hwint=yes
2012 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2014 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2015 tm_file="${tm_file} sol26.h"
2017 tm_file="${tm_file} sparc/sol2.h"
2018 if test x$gnu_ld = xyes; then
2019 tm_file="${tm_file} sparc/sol2-gld.h"
2021 if test x$gas = xyes; then
2022 tm_file="${tm_file} sparc/sol2-gas.h"
2024 tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2025 if test x$gnu_ld = xyes; then
2026 tmake_file="$tmake_file t-slibgcc-elf-ver"
2028 tmake_file="$tmake_file t-slibgcc-sld"
2031 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2032 if test x$gnu_ld = xno; then
2033 tm_file="${tm_file} sparc/sol26-sld.h"
2036 *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2037 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h tm-dwarf2.h"
2038 if test x$gnu_ld = xyes; then
2039 tm_file="${tm_file} sparc/sol2-gld-bi.h"
2041 if test x$gas = xyes; then
2042 tm_file="${tm_file} sparc/sol2-gas-bi.h"
2044 tmake_file="$tmake_file sparc/t-sol2-64"
2045 need_64bit_hwint=yes
2048 c_target_objs="sol2-c.o"
2049 cxx_target_objs="sol2-c.o"
2051 tm_p_file="${tm_p_file} sol2-protos.h"
2052 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2053 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2054 "":yes:* | yes:yes:* )
2056 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2064 "":*:yes | yes:*:yes )
2070 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2072 extra_parts="crtbegin.o crtend.o"
2076 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2077 extra_options="${extra_options} sparc/little-endian.opt"
2078 tmake_file="${tmake_file} sparc/t-crtfm"
2079 extra_parts="crtbegin.o crtend.o"
2082 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2083 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2084 extra_options="${extra_options} sparc/long-double-switch.opt"
2085 tmake_file="${tmake_file} sparc/t-crtfm"
2086 case "x$with_cpu" in
2088 x) with_cpu=ultrasparc ;;
2089 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2091 need_64bit_hwint=yes
2093 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
2094 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2095 extra_options="${extra_options} sparc/long-double-switch.opt"
2096 tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
2099 tm_file="sparc/biarch64.h ${tm_file}"
2100 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2101 extra_options="${extra_options} sparc/long-double-switch.opt"
2102 tmake_file="${tmake_file} sparc/t-netbsd64"
2105 tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2106 tmake_file="arm/t-arm arm/t-strongarm-elf"
2109 extra_modes=arm/arm-modes.def
2113 tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2114 tmake_file="arm/t-arm arm/t-strongarm-pe"
2117 extra_modes=arm/arm-modes.def
2118 extra_options="${extra_options} arm/pe.opt"
2123 tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2124 tmake_file="arm/t-arm arm/t-strongarm-elf"
2127 extra_modes=arm/arm-modes.def
2130 target_cpu_default="TARGET_CPU_v850e1"
2131 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2132 tm_p_file=v850/v850-protos.h
2133 tmake_file=v850/t-v850e
2134 md_file=v850/v850.md
2135 out_file=v850/v850.c
2136 extra_options="${extra_options} v850/v850.opt"
2137 if test x$stabs = xyes
2139 tm_file="${tm_file} dbx.h"
2142 c_target_objs="v850-c.o"
2143 cxx_target_objs="v850-c.o"
2147 target_cpu_default="TARGET_CPU_v850e"
2148 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2149 tm_p_file=v850/v850-protos.h
2150 tmake_file=v850/t-v850e
2151 md_file=v850/v850.md
2152 out_file=v850/v850.c
2153 extra_options="${extra_options} v850/v850.opt"
2154 if test x$stabs = xyes
2156 tm_file="${tm_file} dbx.h"
2159 c_target_objs="v850-c.o"
2160 cxx_target_objs="v850-c.o"
2164 target_cpu_default="TARGET_CPU_generic"
2165 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2166 tmake_file=v850/t-v850
2167 if test x$stabs = xyes
2169 tm_file="${tm_file} dbx.h"
2172 c_target_objs="v850-c.o"
2173 cxx_target_objs="v850-c.o"
2176 vax-*-bsd*) # VAXen running BSD
2177 tm_file="${tm_file} vax/bsd.h"
2178 tmake_file=vax/t-memfuncs
2182 vax-*-sysv*) # VAXen running system V
2183 tm_file="${tm_file} vax/vaxv.h"
2184 tmake_file=vax/t-memfuncs
2188 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2191 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2197 tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2200 vax-*-ultrix*) # VAXen running ultrix
2201 tm_file="${tm_file} vax/ultrix.h"
2202 tmake_file=vax/t-memfuncs
2206 tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2207 tmake_file="arm/t-arm arm/t-xscale-elf"
2210 extra_modes=arm/arm-modes.def
2214 tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2215 tmake_file="arm/t-arm arm/t-xscale-coff"
2218 extra_modes=arm/arm-modes.def
2222 # For historical reasons, the target files omit the 'x'.
2223 tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2224 tm_p_file=stormy16/stormy16-protos.h
2225 md_file=stormy16/stormy16.md
2226 out_file=stormy16/stormy16.c
2227 extra_options=stormy16/stormy16.opt
2228 tmake_file="stormy16/t-stormy16"
2229 extra_parts="crtbegin.o crtend.o"
2233 tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2234 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2237 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2238 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2241 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2242 tmake_file="${tmake_file} mn10300/t-linux"
2244 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2248 echo "*** Configuration ${target} not supported" 1>&2
2254 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2255 tmake_file="${tmake_file} i386/t-gmm_malloc"
2257 i[34567]86-*-linux* | x86_64-*-linux*)
2258 tmake_file="${tmake_file} i386/t-pmm_malloc"
2260 i[34567]86-*-* | x86_64-*-*)
2261 tmake_file="${tmake_file} i386/t-gmm_malloc"
2265 # Support for --with-cpu and related options (and a few unrelated options,
2269 echo "--with-cpu must be passed a value" 1>&2
2274 # If there is no $with_cpu option, try to infer one from ${target}.
2275 # This block sets nothing except for with_cpu.
2276 if test x$with_cpu = x ; then
2279 # A Cirrus ARM variant.
2286 case ${target_noncanonical} in
2296 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2297 with_cpu=pentium-mmx
2304 i686-*-* | i786-*-*)
2305 case ${target_noncanonical} in
2306 k8-*|opteron-*|athlon_64-*)
2309 athlon_xp-*|athlon_mp-*|athlon_4-*)
2312 athlon_tbird-*|athlon-*)
2318 pentium3-*|pentium3m-*)
2321 pentium4-*|pentium4m-*)
2360 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2361 if [ x$with_cpu = xsparc64 ]; then
2368 # Similarly for --with-float
2369 if test x$with_float = x; then
2377 # Similarly for --with-schedule.
2378 if test x$with_schedule = x; then
2381 # Override default PA8000 scheduling model.
2382 with_schedule=7100LC
2387 # Validate and mark as valid any --with options supported
2388 # by this target. In order to use a particular --with option
2389 # you must list it in supported_defaults; validating the value
2390 # is optional. This case statement should set nothing besides
2391 # supported_defaults.
2396 supported_defaults="cpu tune"
2397 for which in cpu tune; do
2398 eval "val=\$with_$which"
2401 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2402 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2406 echo "Unknown CPU used in --with-$which=$val" 1>&2
2414 supported_defaults="arch cpu float tune fpu abi"
2415 for which in cpu tune; do
2416 # See if it matches any of the entries in arm-cores.def
2417 eval "val=\$with_$which"
2418 if [ x"$val" = x ] \
2419 || grep "^ARM_CORE(\"$val\"," \
2420 ${srcdir}/config/arm/arm-cores.def \
2423 new_val=`grep "^ARM_CORE(\"$val\"," \
2424 ${srcdir}/config/arm/arm-cores.def | \
2425 sed -e 's/^[^,]*,[ ]*//' | \
2427 eval "target_${which}_cname=$new_val"
2428 echo "For $val real value is $new_val"
2431 echo "Unknown CPU used in --with-$which=$val" 1>&2
2436 case "$with_arch" in
2438 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2439 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2444 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2449 case "$with_float" in
2451 | soft | hard | softfp)
2455 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2462 | fpa | fpe2 | fpe3 | maverick | vfp )
2466 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2473 | apcs-gnu | atpcs | aapcs | iwmmxt )
2477 echo "Unknown ABI used in --with-abi=$with_abi"
2482 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2483 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2488 supported_defaults=cpu
2492 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2499 supported_defaults="cpu"
2501 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2505 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
2506 echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2512 hppa*-*-* | parisc*-*-*)
2513 supported_defaults="arch schedule"
2515 case "$with_arch" in
2516 "" | 1.0 | 1.1 | 2.0)
2520 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2525 case "$with_schedule" in
2526 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2530 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2536 i[34567]86-*-* | x86_64-*-*)
2537 supported_defaults="arch cpu tune"
2538 for which in arch cpu tune; do
2539 eval "val=\$with_$which"
2542 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2543 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2544 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2545 | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
2546 | athlon64 | athlon-fx | prescott | pentium-m \
2547 | pentium4m | pentium3m| nocona)
2551 echo "Unknown CPU given in --with-$which=$val." 1>&2
2559 supported_defaults="abi arch float tune divide"
2561 case ${with_float} in
2566 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2572 "" | 32 | o64 | n32 | 64 | eabi)
2576 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2581 case ${with_divide} in
2582 "" | breaks | traps)
2586 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2591 powerpc*-*-* | rs6000-*-*)
2592 supported_defaults="cpu float tune"
2594 for which in cpu tune; do
2595 eval "val=\$with_$which"
2597 default32 | default64)
2598 with_which="with_$which"
2602 | power | power[2345] | powerpc | powerpc64 \
2603 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2604 | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2605 | 601 | 602 | 603 | 603e | ec603e | 604 \
2606 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2607 | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2611 echo "Unknown cpu used in --with-$which=$val." 1>&2
2619 supported_defaults="arch mode tune"
2621 for which in arch tune; do
2622 eval "val=\$with_$which"
2624 "" | g5 | g6 | z900 | z990)
2628 echo "Unknown cpu used in --with-$which=$val." 1>&2
2634 case ${with_mode} in
2639 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2645 sh[123456ble]-*-* | sh-*-*)
2646 supported_defaults="cpu"
2647 case "`echo $with_cpu | tr A-Z_ a-z- | sed s/sh/m/`" in
2648 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2651 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2653 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2656 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
2657 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2658 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2659 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2665 supported_defaults="cpu float tune"
2667 for which in cpu tune; do
2668 eval "val=\$with_$which"
2670 "" | sparc | sparcv9 | sparc64 | sparc86x \
2671 | v7 | cypress | v8 | supersparc | sparclite | f930 \
2672 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2673 | v9 | ultrasparc | ultrasparc3)
2677 echo "Unknown cpu used in --with-$which=$val" 1>&2
2683 case ${with_float} in
2688 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2695 supported_defaults=cpu
2697 "" | v850e | v850e1)
2701 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2708 # Set some miscellaneous flags for particular targets.
2709 target_cpu_default2=
2712 if test x$gas = xyes
2714 target_cpu_default2="MASK_GAS"
2719 if test x$target_cpu_cname = x
2721 target_cpu_default2=TARGET_CPU_generic
2723 target_cpu_default2=TARGET_CPU_$target_cpu_cname
2728 case "x$with_cpu" in
2731 target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2734 target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2737 target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2740 target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2743 target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2746 target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2749 target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2752 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2758 hppa*-*-* | parisc*-*-*)
2759 target_cpu_default2="MASK_BIG_SWITCH"
2760 if test x$gas = xyes
2762 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2767 if test x$gnu_ld = xyes
2769 target_cpu_default2="MASK_SPLIT_ADDRESSES"
2773 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2776 if test "x$enable_gofast" = xyes
2778 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2779 tmake_file="mips/t-gofast $tmake_file"
2781 tmake_file="mips/t-mips $tmake_file"
2785 powerpc*-*-* | rs6000-*-*)
2786 # FIXME: The PowerPC port uses the value set at compile time,
2787 # although it's only cosmetic.
2788 if test "x$with_cpu" != x
2790 target_cpu_default2="\\\"$with_cpu\\\""
2792 out_file=rs6000/rs6000.c
2793 c_target_objs="${c_target_objs} rs6000-c.o"
2794 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2795 tmake_file="rs6000/t-rs6000 ${tmake_file}"
2797 if test x$enable_e500_double = xyes
2799 tm_file="$tm_file rs6000/e500-double.h"
2804 # Some standard aliases.
2809 xsparcv9 | xsparc64)
2814 # The Sparc port checks this value at compile-time.
2815 target_cpu_default2="TARGET_CPU_$with_cpu"
2818 # FIXME: The v850 is "special" in that it does not support
2819 # runtime CPU selection, only --with-cpu.
2820 case "x$with_cpu" in
2824 target_cpu_default2="TARGET_CPU_$with_cpu"
2831 all_defaults="abi cpu arch tune schedule float mode fpu divide"
2832 for option in $all_defaults
2834 eval "val=\$with_$option"
2835 if test -n "$val"; then
2836 case " $supported_defaults " in
2840 echo "This target does not support --with-$option." 2>&1
2847 t="{ \"$option\", \"$val\" }"
2849 t="${t}, { \"$option\", \"$val\" }"
2856 configure_default_options="{ { NULL, NULL} }"
2858 configure_default_options="{ ${t} }"
2861 if test "$target_cpu_default2" != ""
2863 if test "$target_cpu_default" != ""
2865 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
2867 target_cpu_default=$target_cpu_default2