1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # out_file The name of the machine description C support
91 # file, if different from "$cpu_type/$cpu_type.c".
93 # md_file The name of the machine-description file, if
94 # different from "$cpu_type/$cpu_type.md".
96 # tmake_file A list of machine-description-specific
97 # makefile-fragments, if different from
98 # "$cpu_type/t-$cpu_type".
100 # extra_modes The name of the file containing a list of extra
101 # machine modes, if necessary and different from
102 # "$cpu_type/$cpu_type-modes.def".
104 # extra_objs List of extra objects that should be linked into
105 # the compiler proper (cc1, cc1obj, cc1plus)
106 # depending on target.
108 # extra_gcc_objs List of extra objects that should be linked into
109 # the compiler driver (gcc) depending on target.
111 # extra_headers List of used header files from the directory
112 # config/${cpu_type}.
114 # user_headers_inc_next_pre
115 # List of header file names of internal gcc header
116 # files, which should be prefixed by an include_next.
117 # user_headers_inc_next_post
118 # List of header file names of internal gcc header
119 # files, which should be postfixed by an include_next.
120 # use_gcc_tgmath If set, add tgmath.h to the list of used header
123 # use_gcc_stdint If "wrap", install a version of stdint.h that
124 # wraps the system's copy for hosted compilations;
125 # if "provide", provide a version of systems without
126 # such a system header; otherwise "none", do not
127 # provide such a header at all.
129 # extra_passes List of extra executables compiled for this target
130 # machine, used for compiling from source to object.
132 # extra_parts List of extra object files that should be compiled
133 # for this target machine.
135 # extra_programs Like extra_passes, but these are used when linking.
137 # extra_options List of target-dependent .opt files.
139 # c_target_objs List of extra target-dependent objects that be
140 # linked into the C compiler only.
142 # cxx_target_objs List of extra target-dependent objects that be
143 # linked into the C++ compiler only.
145 # fortran_target_objs List of extra target-dependent objects that be
146 # linked into the fortran compiler only.
148 # target_gtfiles List of extra source files with type information.
150 # xm_defines List of macros to define when compiling for the
153 # xm_file List of files to include when compiling for the
156 # use_collect2 Set to yes or no, depending on whether collect2
159 # target_cpu_default Set to override the default target model.
161 # gdb_needs_out_file_path
162 # Set to yes if gdb needs a dir command with
163 # `dirname $out_file`.
165 # thread_file Set to control which thread package to use.
167 # gas Set to yes or no depending on whether the target
168 # system normally uses GNU as.
170 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
171 # for this target. This is true if this target
172 # supports "long" or "wchar_t" wider than 32 bits,
173 # or BITS_PER_WORD is wider than 32 bits.
174 # The setting made here must match the one made in
175 # other locations such as libcpp/configure.ac
177 # configure_default_options
178 # Set to an initializer for configure_default_options
179 # in configargs.h, based on --with-cpu et cetera.
181 # The following variables are used in each case-construct to build up the
182 # outgoing variables:
184 # gnu_ld Set to yes or no depending on whether the target
185 # system normally uses GNU ld.
190 user_headers_inc_next_pre=
191 user_headers_inc_next_post=
205 # Set this to force installation and use of collect2.
207 # Set this to override the default target model.
209 # Set this if gdb needs a dir command with `dirname $out_file`
210 gdb_needs_out_file_path=
211 # Set this to control which thread package will be used.
213 # Reinitialize these from the flag values every loop pass, since some
214 # configure entries modify them.
216 gnu_ld="$gnu_ld_flag"
217 default_use_cxa_atexit=no
218 default_gnu_indirect_function=no
222 # Selects the object file format reader/writer used by LTO.
223 lto_binary_reader=lto-elf
225 # Don't carry these over build->host->target. Please.
229 # Obsolete configurations.
232 # if test "x$enable_obsolete" != xyes; then
233 # echo "*** Configuration ${target} is obsolete." >&2
234 # echo "*** Specify --enable-obsolete to build it anyway." >&2
235 # echo "*** Support will be REMOVED in the next major release of GCC," >&2
236 # echo "*** unless a maintainer comes forward." >&2
241 # Unsupported targets list. Do not put an entry in this list unless
242 # it would otherwise be caught by a more permissive pattern. The list
243 # should be in alphabetical order.
246 | i[34567]86-*-go32* \
247 | mips64orion*-*-rtems* \
249 | sparc-hal-solaris2* \
257 | *-*-solaris2.[0-7] \
258 | *-*-solaris2.[0-7].* \
262 echo "*** Configuration ${target} not supported" 1>&2
267 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
268 # updated in each machine entry. Also set default extra_headers for some
271 cpu_type=`echo ${target} | sed 's/-.*$//'`
276 tmake_file=m32c/t-m32c
281 extra_options="${extra_options} g.opt"
288 extra_headers="mmintrin.h arm_neon.h"
289 c_target_objs="arm-c.o"
290 cxx_target_objs="arm-c.o"
294 c_target_objs="avr-c.o"
295 cxx_target_objs="avr-c.o"
304 extra_options="${extra_options} g.opt"
306 moxie*) cpu_type=moxie
310 extra_headers=math-68881.h
314 c_target_objs="i386-c.o"
315 cxx_target_objs="i386-c.o"
316 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
317 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
318 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
319 immintrin.h x86intrin.h avxintrin.h xopintrin.h
320 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
325 c_target_objs="i386-c.o"
326 cxx_target_objs="i386-c.o"
327 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
328 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
329 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
330 immintrin.h x86intrin.h avxintrin.h xopintrin.h
331 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
336 extra_headers=ia64intrin.h
338 extra_options="${extra_options} g.opt"
344 extra_options="${extra_options} g.opt"
348 extra_options="${extra_options} g.opt"
351 extra_headers=math-68881.h
355 extra_options="${extra_options} g.opt"
360 extra_headers="loongson.h"
361 extra_options="${extra_options} g.opt"
368 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
371 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
375 extra_options="${extra_options} g.opt"
379 extra_options="${extra_options} g.opt"
383 extra_options="${extra_options} g.opt"
397 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
398 sh[123456789lbe]*-*-* | sh-*-*)
404 tm_file=${cpu_type}/${cpu_type}.h
405 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
407 tm_p_file=${cpu_type}/${cpu_type}-protos.h
410 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
412 extra_modes=${cpu_type}/${cpu_type}-modes.def
414 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
416 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
421 if test "x$enable_cld" = xyes; then
422 tm_defines="${tm_defines} USE_IX86_CLD=1"
424 if test "x$enable_frame_pointer" = xyes; then
425 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
427 tm_file="vxworks-dummy.h ${tm_file}"
430 tm_file="i386/biarch64.h ${tm_file}"
431 if test "x$enable_cld" = xyes; then
432 tm_defines="${tm_defines} USE_IX86_CLD=1"
434 if test "x$enable_frame_pointer" = xyes; then
435 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
437 tm_file="vxworks-dummy.h ${tm_file}"
441 # On a.out targets, we need to use collect2.
448 # Common C libraries.
449 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
451 # Common parts for widely ported systems.
454 tmake_file="t-darwin ${cpu_type}/t-darwin"
455 tm_file="${tm_file} darwin.h"
458 tm_file="${tm_file} darwin9.h"
460 *-*-darwin[12][0-9]*)
461 tm_file="${tm_file} darwin9.h darwin10.h"
464 tm_file="${tm_file} ${cpu_type}/darwin.h"
465 tm_p_file="${tm_p_file} darwin-protos.h"
466 target_gtfiles="\$(srcdir)/config/darwin.c"
467 extra_options="${extra_options} darwin.opt"
468 c_target_objs="${c_target_objs} darwin-c.o"
469 cxx_target_objs="${cxx_target_objs} darwin-c.o"
470 fortran_target_objs="darwin-f.o"
471 extra_objs="darwin.o"
472 extra_gcc_objs="darwin-driver.o"
473 default_use_cxa_atexit=yes
475 case ${enable_threads} in
476 "" | yes | posix) thread_file='posix' ;;
479 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
480 # This is the place-holder for the generic a.out configuration
481 # of FreeBSD. No actual configuration resides here since
482 # there was only ever a bare-bones ix86 configuration for
483 # a.out and it exists solely in the machine-specific section.
484 # This place-holder must exist to avoid dropping into
485 # the generic ELF configuration of FreeBSD (i.e. it must be
486 # ordered before that section).
489 # This is the generic ELF configuration of FreeBSD. Later
490 # machine-specific sections may refine and add to this
493 # Due to tm_file entry ordering issues that vary between cpu
494 # architectures, we only define fbsd_tm_file to allow the
495 # machine-specific section to dictate the final order of all
496 # entries of tm_file with the minor exception that components
497 # of the tm_file set here will always be of the form:
499 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
501 # The machine-specific section should not tamper with this
502 # ordering but may order all other entries of tm_file as it
503 # pleases around the provided core setting.
506 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
507 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
508 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
509 tmake_file="t-slibgcc-elf-ver t-freebsd"
510 case ${enable_threads} in
512 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
516 tmake_file="${tmake_file} t-freebsd-thread"
517 # Before 5.0, FreeBSD can't bind shared libraries to -lc
518 # when "optionally" threaded via weak pthread_* checks.
520 *-*-freebsd[34] | *-*-freebsd[34].*)
521 tmake_file="${tmake_file} t-slibgcc-nolc-override"
526 echo 'Unknown thread configuration for FreeBSD'
530 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
531 extra_options="$extra_options rpath.opt freebsd.opt"
536 default_use_cxa_atexit=yes;;
538 # need_64bit_hwint=yes # system compiler has this for all arch!
541 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
542 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
545 case ${enable_threads} in
546 "" | yes | posix) thread_file='posix' ;;
548 tmake_file="t-slibgcc-elf-ver t-linux"
550 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
553 tmake_file="$tmake_file t-gnu";;
555 # glibc / uclibc / bionic switch.
556 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
559 extra_options="$extra_options linux.opt";;
561 tm_defines="$tm_defines OPTION_GLIBC=1";;
565 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
568 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
571 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
574 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
576 default_use_cxa_atexit=yes
579 # Add Android userspace support to Linux targets.
582 tm_file="$tm_file linux-android.h"
583 extra_options="$extra_options linux-android.opt"
586 # Enable compilation for Android by default for *android* targets.
589 tm_defines="$tm_defines ANDROID_DEFAULT=1"
592 tm_defines="$tm_defines ANDROID_DEFAULT=0"
597 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
601 # NetBSD 2.0 and later get POSIX threads enabled by default.
602 # Allow them to be explicitly enabled on any other version.
603 case ${enable_threads} in
606 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
608 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
614 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
618 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
619 # ELF configurations. We will clear extra_parts in the
620 # a.out configurations.
622 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
623 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
627 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
628 # default (unless overridden by --disable-__cxa_atexit).
630 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
631 default_use_cxa_atexit=yes
636 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
637 case ${enable_threads} in
640 tmake_file="${tmake_file} t-openbsd-thread"
644 *-*-openbsd2.*|*-*-openbsd3.[012])
645 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
649 case ${enable_threads} in
650 yes) thread_file='rtems' ;;
658 extra_options="${extra_options} sol2.opt"
663 extra_options="${extra_options} vxworks.opt"
665 case ${enable_threads} in
667 "" | yes | vxworks) thread_file='vxworks' ;;
668 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
672 # Assume that newlib is being used and so __cxa_atexit is provided.
673 default_use_cxa_atexit=yes
679 # Support site-specific machine types.
681 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
682 tm_file=${cpu_type}/$rest.h
683 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
684 then xm_file=${cpu_type}/xm-$rest.h
686 if test -f $srcdir/config/${cpu_type}/t-$rest
687 then tmake_file=${cpu_type}/t-$rest
691 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
692 target_cpu_default="MASK_GAS"
693 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
696 tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
697 target_cpu_default="MASK_GAS"
698 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
701 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
702 target_cpu_default="MASK_GAS"
703 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
704 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
707 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
708 target_cpu_default="MASK_GAS"
709 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
712 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
713 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
714 # default x-alpha is only appropriate for dec-osf.
715 target_cpu_default="MASK_GAS"
716 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
719 if test x$stabs = xyes
721 tm_file="${tm_file} dbx.h"
723 if test x$gas != xyes
725 extra_passes="mips-tfile mips-tdump"
728 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
729 tm_file="${tm_file} alpha/osf5.h"
730 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
731 extra_options="${extra_options} rpath.opt"
732 extra_headers=va_list.h
733 use_gcc_stdint=provide
734 case ${enable_threads} in
737 tmake_file="${tmake_file} alpha/t-osf-pthread"
742 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
743 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
744 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
747 install_headers_dir=install-headers-cp
748 extra_options="${extra_options} vms/vms.opt"
751 tm_file="${tm_file} alpha/vms.h"
752 xm_file="alpha/xm-vms.h"
753 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
756 install_headers_dir=install-headers-cp
757 extra_options="${extra_options} vms/vms.opt"
760 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
761 extra_parts="crtinit.o crtfini.o"
764 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
765 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
768 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
769 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
772 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
773 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
776 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
777 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
781 arm*-*-linux*) # ARM GNU/Linux with ELF
782 tm_file="dbxelf.h elfos.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
785 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
788 tmake_file="${tmake_file} t-linux arm/t-arm"
791 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
792 tm_file="$tm_file ../../libgcc/config/arm/bpabi.h"
793 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
794 # Define multilib configuration for arm-linux-androideabi.
797 tmake_file="$tmake_file arm/t-linux-androideabi"
800 # The BPABI long long divmod functions return a 128-bit value in
801 # registers r0-r3. Correctly modeling that requires the use of
804 # The EABI requires the use of __cxa_atexit.
805 default_use_cxa_atexit=yes
808 tmake_file="$tmake_file arm/t-linux"
811 tm_file="$tm_file arm/aout.h arm/arm.h"
812 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
814 arm*-*-uclinux*) # ARM ucLinux
815 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
816 tmake_file="arm/t-arm arm/t-arm-elf"
819 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
820 tm_file="$tm_file ../../libgcc/config/arm/bpabi.h"
821 tmake_file="$tmake_file arm/t-bpabi"
822 # The BPABI long long divmod functions return a 128-bit value in
823 # registers r0-r3. Correctly modeling that requires the use of
826 # The EABI requires the use of __cxa_atexit.
827 default_use_cxa_atexit=yes
829 tm_file="$tm_file arm/aout.h arm/arm.h"
830 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
833 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
834 tmake_file="arm/t-arm arm/t-arm-elf"
835 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
837 arm*-*-eabi* | arm*-*-symbianelf* )
838 # The BPABI long long divmod functions return a 128-bit value in
839 # registers r0-r3. Correctly modeling that requires the use of
842 default_use_cxa_atexit=yes
843 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
844 tm_file="$tm_file ../../libgcc/config/arm/bpabi.h"
845 tmake_file="arm/t-arm arm/t-arm-elf"
848 tm_file="$tm_file newlib-stdint.h"
849 tmake_file="${tmake_file} arm/t-bpabi"
853 tm_file="${tm_file} arm/symbian.h"
854 # We do not include t-bpabi for Symbian OS because the system
855 # provides its own implementation of the BPABI functions.
856 tmake_file="${tmake_file} arm/t-symbian"
859 tm_file="${tm_file} arm/aout.h arm/arm.h"
860 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
863 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
864 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
865 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
868 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
869 tmake_file="arm/t-arm arm/t-arm-elf"
870 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
873 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
874 tmake_file="arm/t-arm arm/t-wince-pe"
875 extra_options="${extra_options} arm/pe.opt"
879 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
880 tmake_file="arm/t-arm arm/t-pe"
882 extra_options="${extra_options} arm/pe.opt"
886 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
887 tmake_file="avr/t-avr t-rtems avr/t-rtems"
888 extra_gcc_objs="driver-avr.o avr-devices.o"
889 extra_objs="avr-devices.o"
892 tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
894 extra_gcc_objs="driver-avr.o avr-devices.o"
895 extra_objs="avr-devices.o"
898 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
899 tmake_file=bfin/t-bfin-elf
903 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
904 tmake_file=bfin/t-bfin-uclinux
905 tm_defines="${tm_defines} DEFAULT_LIBC=LIBC_UCLIBC"
906 extra_options="${extra_options} linux.opt"
910 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
911 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
912 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
916 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
917 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
920 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
921 tmake_file=bfin/t-bfin
925 crisv32-*-elf | crisv32-*-none)
926 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
927 tmake_file="cris/t-cris"
928 target_cpu_default=32
930 extra_options="${extra_options} cris/elf.opt"
933 cris-*-elf | cris-*-none)
934 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
935 tmake_file="cris/t-cris cris/t-elfmulti"
937 extra_options="${extra_options} cris/elf.opt"
940 crisv32-*-linux* | cris-*-linux*)
941 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
942 # We need to avoid using t-linux, so override default tmake_file
943 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
944 extra_options="${extra_options} cris/linux.opt"
947 target_cpu_default=10
950 target_cpu_default=32
955 tm_file="elfos.h newlib-stdint.h ${tm_file}"
956 extra_parts="crtbegin.o crtend.o"
960 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
961 tmake_file=fr30/t-fr30
962 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
965 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
966 tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
970 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
971 linux.h glibc-stdint.h frv/linux.h"
972 tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
973 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
978 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
979 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
980 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
985 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
986 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
987 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
988 tm_defines="${tm_defines} DEFAULT_LIBC=LIBC_UCLIBC"
989 extra_options="${extra_options} linux.opt"
992 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp t-rtems"
993 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
996 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
997 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1000 tmake_file="h8300/t-h8300 h8300/t-elf"
1001 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1004 target_cpu_default="MASK_PA_11|MASK_PA_20"
1005 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
1006 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1008 tmake_file="${tmake_file} pa/t-linux64"
1010 need_64bit_hwint=yes
1013 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1014 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
1015 pa/pa32-regs.h pa/pa32-linux.h"
1016 tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
1017 # Set the libgcc version number
1018 if test x$sjlj = x1; then
1019 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1021 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1024 # port not yet contributed.
1026 # target_cpu_default="MASK_PA_11"
1028 hppa[12]*-*-hpux10*)
1030 hppa1.1-*-* | hppa2*-*-*)
1031 target_cpu_default="MASK_PA_11"
1034 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1035 pa/pa-hpux.h pa/pa-hpux10.h"
1036 extra_options="${extra_options} pa/pa-hpux.opt"
1039 tm_file="${tm_file} pa/pa-hpux1010.h"
1040 extra_options="${extra_options} pa/pa-hpux1010.opt"
1043 use_gcc_stdint=provide
1044 tm_file="${tm_file} hpux-stdint.h"
1045 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
1046 case ${enable_threads} in
1048 if test x$have_pthread_h = xyes ; then
1049 tmake_file="${tmake_file} pa/t-dce-thr"
1053 tmake_file="${tmake_file} pa/t-dce-thr"
1056 # Set the libgcc version number
1057 if test x$sjlj = x1; then
1058 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1060 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1066 target_cpu_default="MASK_PA_11|MASK_PA_20"
1067 if test x$gnu_ld = xyes
1069 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1071 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1072 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1076 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1077 extra_options="${extra_options} pa/pa-hpux1111.opt"
1080 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1083 extra_options="${extra_options} pa/pa-hpux.opt \
1084 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1085 need_64bit_hwint=yes
1086 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1087 # Set the libgcc version number
1088 if test x$sjlj = x1; then
1089 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1091 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1093 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1095 case x${enable_threads} in
1103 use_gcc_stdint=provide
1104 tm_file="${tm_file} hpux-stdint.h"
1108 tm_file="${tm_file} hpux-stdint.h"
1112 hppa[12]*-*-hpux11*)
1114 hppa1.1-*-* | hppa2*-*-*)
1115 target_cpu_default="MASK_PA_11"
1118 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1119 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1120 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1123 tm_file="${tm_file} pa/pa-hpux1111.h"
1124 extra_options="${extra_options} pa/pa-hpux1111.opt"
1127 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1128 # Set the libgcc version number
1129 if test x$sjlj = x1; then
1130 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1132 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1134 extra_parts="libgcc_stub.a"
1135 case x${enable_threads} in
1144 use_gcc_stdint=provide
1145 tm_file="${tm_file} hpux-stdint.h"
1149 tm_file="${tm_file} hpux-stdint.h"
1153 i[34567]86-*-darwin*)
1154 need_64bit_hwint=yes
1157 # This is so that '.../configure && make' doesn't fail due to
1158 # config.guess deciding that the configuration is i386-*-darwin* and
1159 # then this file using that to set --with-cpu=i386 which has no -m64
1161 with_cpu=${with_cpu:-generic}
1162 tmake_file="${tmake_file} t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1163 lto_binary_reader=lto-macho
1166 with_cpu=${with_cpu:-generic}
1167 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1168 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1169 lto_binary_reader=lto-macho
1172 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1173 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1176 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1177 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1179 i[34567]86-*-freebsd*)
1180 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1183 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1184 tmake_file="${tmake_file} i386/t-crtstuff"
1186 i[34567]86-*-netbsdelf*)
1187 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1189 i[34567]86-*-netbsd*)
1190 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1191 tmake_file="${tmake_file} t-netbsd"
1196 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1197 tmake_file="${tmake_file} i386/t-crtstuff"
1199 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1200 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1201 # needed to unconfuse gdb
1202 tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1203 # we need collect2 until our bug is fixed...
1206 i[34567]86-*-openbsd*)
1207 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1208 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1212 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1213 # Intel 80386's running GNU/*
1214 # with ELF format using glibc 2
1215 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
1217 i[34567]86-*-linux*)
1218 # Assume modern glibc
1219 default_gnu_indirect_function=yes
1220 if test x$enable_targets = xall; then
1221 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1222 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1223 tmake_file="${tmake_file} i386/t-linux64"
1224 need_64bit_hwint=yes
1226 case X"${with_cpu}" in
1227 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1230 if test x$with_cpu_64 = x; then
1235 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1236 echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1241 tm_file="${tm_file} i386/linux.h"
1244 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1245 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1246 i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1247 i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1249 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1251 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1252 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
1253 i386/x86-64.h i386/linux64.h"
1256 default_gnu_indirect_function=glibc-2011 ;;
1257 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1258 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1260 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1262 i[34567]86-pc-msdosdjgpp*)
1263 xm_file=i386/xm-djgpp.h
1264 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1265 tmake_file="${tmake_file} i386/t-djgpp"
1266 extra_options="${extra_options} i386/djgpp.opt"
1271 i[34567]86-*-lynxos*)
1273 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1274 tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1275 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1276 extra_options="${extra_options} lynx.opt"
1281 i[3456x]86-*-netware*)
1282 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1283 tmake_file="${tmake_file} i386/t-netware"
1284 extra_objs=netware.o
1287 extra_objs="$extra_objs nwld.o"
1288 tm_file="${tm_file} i386/nwld.h"
1289 tmake_file="${tmake_file} i386/t-nwld"
1290 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1293 case x${enable_threads} in
1294 x | xyes | xposix) thread_file='posix';;
1295 xnks) thread_file='nks';;
1297 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1300 i[34567]86-*-nto-qnx*)
1301 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1302 tmake_file="${tmake_file} i386/t-nto"
1306 i[34567]86-*-rtems*)
1307 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1308 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1309 tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1311 i[34567]86-*-solaris2*)
1312 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1313 # Set default arch_32 to pentium4, tune_32 to generic like the other
1314 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1317 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1319 with_arch_32=${with_arch_32:-pentiumpro}
1322 with_arch_32=${with_arch_32:-pentium4}
1325 with_tune_32=${with_tune_32:-generic}
1327 *-*-solaris2.1[0-9]*)
1328 tm_file="${tm_file} sol2-10.h"
1331 tm_file="${tm_file} i386/sol2.h"
1332 if test x$gnu_ld = xyes; then
1333 tm_file="${tm_file} sol2-gld.h"
1335 if test x$gas = xyes; then
1336 tm_file="${tm_file} i386/sol2-gas.h"
1338 tmake_file="${tmake_file} t-sol2 t-svr4"
1339 c_target_objs="${c_target_objs} sol2-c.o"
1340 cxx_target_objs="${cxx_target_objs} sol2-c.o"
1342 tm_p_file="${tm_p_file} sol2-protos.h"
1343 if test x$gnu_ld = xyes; then
1344 tmake_file="$tmake_file t-slibgcc-elf-ver"
1345 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1347 tmake_file="$tmake_file t-slibgcc-sld"
1349 if test x$gas = xyes; then
1350 tm_file="usegas.h ${tm_file}"
1352 tm_file="$tm_file tm-dwarf2.h"
1354 *-*-solaris2.1[0-9]*)
1355 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1356 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1357 tmake_file="$tmake_file i386/t-sol2-10"
1358 # i386/t-crtstuff only affects libgcc. Its inclusion
1359 # depends on a runtime test and is thus performed in
1360 # libgcc/configure.ac instead.
1361 need_64bit_hwint=yes
1364 case X"${with_cpu}" in
1365 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1368 if test x$with_cpu_64 = x; then
1373 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1374 echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1380 use_gcc_stdint=provide
1383 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1384 "":yes:* | yes:yes:* )
1387 "":*:yes | yes:*:yes )
1392 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1393 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1396 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1397 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1400 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1401 tmake_file="${tmake_file} i386/t-vxworks"
1405 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1406 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1407 xm_file=i386/xm-cygwin.h
1408 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1409 if test x$sjlj = x0; then
1410 tmake_eh_file="i386/t-dw2-eh"
1412 tmake_eh_file="i386/t-sjlj-eh"
1414 tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
1415 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1416 extra_options="${extra_options} i386/cygming.opt"
1417 extra_objs="winnt.o winnt-stubs.o"
1418 c_target_objs="${c_target_objs} msformat-c.o"
1419 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1420 if test x$enable_threads = xyes; then
1424 lto_binary_reader=lto-coff
1426 i[34567]86-*-mingw* | x86_64-*-mingw*)
1427 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1428 xm_file=i386/xm-mingw32.h
1430 x86_64-*-* | *-w64-*)
1431 need_64bit_hwint=yes
1437 # This makes the logic if mingw's or the w64 feature set has to be used
1440 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1441 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1442 tm_file="${tm_file} i386/mingw-w64.h"
1443 if test x$enable_targets = xall; then
1444 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1445 case X"${with_cpu}" in
1446 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1449 if test x$with_cpu_64 = x; then
1454 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1455 echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1464 tm_file="${tm_file} i386/mingw-stdint.h"
1465 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1466 if test x$sjlj = x0; then
1467 tmake_eh_file="i386/t-dw2-eh"
1469 tmake_eh_file="i386/t-sjlj-eh"
1471 tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming t-dfprules"
1474 tmake_file="${tmake_file} i386/t-mingw-w64"
1477 tmake_file="${tmake_file} i386/t-mingw-w32"
1480 tmake_file="${tmake_file} i386/t-mingw32"
1483 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1484 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1487 extra_options="${extra_options} i386/mingw-w64.opt"
1492 extra_objs="winnt.o winnt-stubs.o"
1493 c_target_objs="${c_target_objs} msformat-c.o"
1494 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1495 default_use_cxa_atexit=yes
1497 lto_binary_reader=lto-coff
1498 case ${enable_threads} in
1499 "" | yes | win32) thread_file='win32'
1500 tmake_file="${tmake_file} i386/t-gthr-win32"
1505 tmake_file="${tmake_file} i386/t-crtfm"
1512 tm_file="${tm_file} i386/crtdll.h"
1514 *mingw32msv* | *mingw*)
1518 i[34567]86-*-interix3*)
1519 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1520 tmake_file="${tmake_file} i386/t-interix"
1521 extra_options="${extra_options} rpath.opt"
1523 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1524 if test x$enable_threads = xyes ; then
1527 if test x$stabs = xyes ; then
1528 tm_file="${tm_file} dbxcoff.h"
1532 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1533 tmake_file="ia64/t-ia64"
1534 target_cpu_default="0"
1535 if test x$gas = xyes
1537 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1539 if test x$gnu_ld = xyes
1541 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1543 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1546 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1547 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1548 tmake_file="${tmake_file} ia64/t-ia64"
1549 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1552 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1553 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1554 if test x$with_system_libunwind != xyes ; then
1555 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1557 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1558 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1561 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1562 tmake_file="ia64/t-ia64 ia64/t-hpux"
1563 target_cpu_default="MASK_GNU_AS"
1564 case x$enable_threads in
1570 c_target_objs="ia64-c.o"
1571 cxx_target_objs="ia64-c.o"
1572 extra_options="${extra_options} ia64/ilp32.opt"
1574 tm_file="${tm_file} hpux-stdint.h"
1577 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1578 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1579 tmake_file="vms/t-vms ia64/t-ia64 ia64/t-vms"
1580 xmake_file=vms/x-vms
1581 target_cpu_default="0"
1582 if test x$gas = xyes
1584 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1587 install_headers_dir=install-headers-cp
1588 extra_options="${extra_options} vms/vms.opt"
1591 tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
1592 tmake_file=iq2000/t-iq2000
1593 out_file=iq2000/iq2000.c
1594 md_file=iq2000/iq2000.md
1597 tm_file="dbxelf.h elfos.h ${tm_file}"
1598 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1601 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1602 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1603 tmake_file="${tmake_file} t-rtems"
1606 tm_file="dbxelf.h elfos.h ${tm_file} linux.h lm32/uclinux-elf.h"
1607 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1610 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1611 extra_parts="crtinit.o crtfini.o"
1614 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
1615 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1618 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1619 tmake_file="m32r/t-m32r t-rtems"
1620 extra_parts="crtinit.o crtfini.o"
1623 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1624 # We override the tmake_file for linux -- why?
1625 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1627 if test x$enable_threads = xyes; then
1632 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1633 # We override the tmake_file for linux -- why?
1634 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1636 if test x$enable_threads = xyes; then
1640 # m68hc11 and m68hc12 share the same machine description.
1641 m68hc11-*-*|m6811-*-*)
1642 tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1643 tm_p_file="m68hc11/m68hc11-protos.h"
1644 md_file="m68hc11/m68hc11.md"
1645 out_file="m68hc11/m68hc11.c"
1646 tmake_file="m68hc11/t-m68hc11"
1649 m68hc12-*-*|m6812-*-*)
1650 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1651 tm_p_file="m68hc11/m68hc11-protos.h"
1652 md_file="m68hc11/m68hc11.md"
1653 out_file="m68hc11/m68hc11.c"
1654 tmake_file="m68hc11/t-m68hc11"
1655 extra_options="${extra_options} m68hc11/m68hc11.opt"
1658 m68k-*-elf* | fido-*-elf*)
1661 # Check that $with_cpu makes sense.
1666 echo "Cannot accept --with-cpu=$with_cpu"
1673 default_m68k_cpu=68020
1677 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1678 tm_defines="${tm_defines} MOTOROLA=1"
1679 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1680 # Add multilibs for targets other than fido.
1685 tmake_file="$tmake_file m68k/t-mlibs"
1688 extra_parts="crtbegin.o crtend.o"
1691 default_m68k_cpu=68020
1693 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1694 tm_defines="${tm_defines} MOTOROLA=1"
1697 default_m68k_cpu=68020
1699 # needed to unconfuse gdb
1700 tm_defines="${tm_defines} OBSD_OLD_GAS"
1701 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1702 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1703 # we need collect2 until our bug is fixed...
1706 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1707 # with uClibc, using the original
1708 # m68k-elf-based ABI
1709 default_m68k_cpu=68020
1711 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1712 tm_defines="${tm_defines} MOTOROLA=1"
1713 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1715 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1716 # with uClibc, using the new GNU/Linux-style
1718 default_m68k_cpu=68020
1720 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1721 tm_defines="${tm_defines} MOTOROLA=1 DEFAULT_LIBC=LIBC_UCLIBC"
1722 extra_options="${extra_options} linux.opt"
1723 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1725 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1726 # with ELF format using glibc 2
1727 # aka the GNU/Linux C library 6.
1728 default_m68k_cpu=68020
1730 with_arch=${with_arch:-m68k}
1731 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1732 extra_options="${extra_options} m68k/ieee.opt"
1733 tm_defines="${tm_defines} MOTOROLA=1"
1734 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1735 # if not configured with --enable-sjlj-exceptions, bump the
1736 # libgcc version number
1737 if test x$sjlj != x1; then
1738 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1742 default_m68k_cpu=68020
1744 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1745 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1746 tm_defines="${tm_defines} MOTOROLA=1"
1747 extra_parts="crtbegin.o crtend.o"
1750 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1751 tmake_file=mcore/t-mcore
1755 tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1756 tmake_file=mcore/t-mcore-pe
1761 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1762 tmake_file=mep/t-mep
1763 extra_parts="crtbegin.o crtend.o"
1764 c_target_objs="mep-pragma.o"
1765 cxx_target_objs="mep-pragma.o"
1766 if test -d "${srcdir}/../newlib/libc/include" &&
1767 test "x$with_headers" = x; then
1773 tm_file="${tm_file} dbxelf.h linux.h microblaze/linux.h"
1774 c_target_objs="${c_target_objs} microblaze-c.o"
1775 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1776 tmake_file="${tmake_file} t-slibgcc-elf-ver t-slibgcc-nolc-override t-linux microblaze/t-microblaze"
1777 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o crtbeginT.o"
1780 tm_file="${tm_file} dbxelf.h"
1781 c_target_objs="${c_target_objs} microblaze-c.o"
1782 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1783 tmake_file="${tmake_file} microblaze/t-microblaze"
1786 tm_file="elfos.h ${tm_file} mips/iris6.h"
1787 tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
1788 extra_options="${extra_options} rpath.opt"
1789 target_cpu_default="MASK_ABICALLS"
1790 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1791 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1793 if test "x$stabs" = xyes
1795 tm_file="${tm_file} dbx.h"
1797 if test "x$gnu_ld" = xyes
1799 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1801 case ${enable_threads}:${have_pthread_h} in
1802 "":yes | yes:yes ) thread_file=posix ;;
1805 mips*-*-netbsd*) # NetBSD/mips, either endian.
1806 target_cpu_default="MASK_ABICALLS"
1807 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1809 mips64*-*-linux* | mipsisa64*-*-linux*)
1810 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1811 tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1812 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1814 mips64el-st-linux-gnu)
1815 tm_file="${tm_file} mips/st.h"
1816 tmake_file="${tmake_file} mips/t-st"
1818 mips64octeon*-*-linux*)
1819 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1820 target_cpu_default=MASK_SOFT_FLOAT_ABI
1822 mipsisa64r2*-*-linux*)
1823 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1826 extra_parts="$extra_parts crtfastmath.o"
1829 test x$with_llsc != x || with_llsc=yes
1831 mips*-*-linux*) # Linux MIPS, either endian.
1832 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1833 tmake_file="${tmake_file} mips/t-libgcc-mips16"
1836 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1839 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1841 extra_parts="$extra_parts crtfastmath.o"
1842 test x$with_llsc != x || with_llsc=yes
1845 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1846 target_cpu_default="MASK_ABICALLS"
1847 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1850 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1851 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1855 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1856 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1857 extra_options="${extra_options} mips/sde.opt"
1858 case "${with_newlib}" in
1860 # newlib / libgloss.
1863 # MIPS toolkit libraries.
1864 tm_file="$tm_file mips/sdemtk.h"
1865 tmake_file="$tmake_file mips/t-sdemtk"
1866 case ${enable_threads} in
1868 thread_file='mipssde'
1875 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1878 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1881 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1884 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1888 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1889 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1890 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1891 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1892 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1893 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1896 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1899 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1902 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1905 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1909 mipsisa32*-*-elfoabi*)
1910 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1911 tm_file="${tm_file} mips/elfoabi.h"
1913 mipsisa64*-*-elfoabi*)
1914 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1915 tm_file="${tm_file} mips/elfoabi.h"
1918 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1922 mipsisa64sr71k-*-elf*)
1923 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1924 tmake_file=mips/t-sr71k
1925 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1926 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1928 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1929 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1930 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1931 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1932 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1934 mips-*-elf* | mipsel-*-elf*)
1935 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1936 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1938 mips64-*-elf* | mips64el-*-elf*)
1939 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1940 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1941 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1942 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1944 mips64vr-*-elf* | mips64vrel-*-elf*)
1945 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1946 tmake_file=mips/t-vr
1947 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1949 mips64orion-*-elf* | mips64orionel-*-elf*)
1950 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1951 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1952 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1953 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1956 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1957 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1960 tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1961 tmake_file="${tmake_file} mips/t-vxworks"
1963 mipstx39-*-elf* | mipstx39el-*-elf*)
1964 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1965 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1967 mmix-knuth-mmixware)
1968 tm_file="${tm_file} newlib-stdint.h"
1969 need_64bit_hwint=yes
1973 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1974 if test x$stabs = xyes
1976 tm_file="${tm_file} dbx.h"
1982 tm_file="${tm_file} newlib-stdint.h"
1986 tm_file="${tm_file} newlib-stdint.h"
1989 # port not yet contributed
1990 #powerpc-*-openbsd*)
1991 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1995 extra_options="${extra_options} rs6000/darwin.opt"
1996 extra_parts="crt2.o"
1998 *-darwin1[0-9]* | *-darwin[8-9]*)
1999 tmake_file="${tmake_file} rs6000/t-darwin8"
2000 tm_file="${tm_file} rs6000/darwin8.h"
2003 tm_file="${tm_file} rs6000/darwin7.h"
2008 tmake_file="${tmake_file} t-slibgcc-darwin"
2009 lto_binary_reader=lto-macho
2010 extra_headers=altivec.h
2012 powerpc64-*-darwin*)
2013 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2014 extra_parts="crt2.o"
2015 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin"
2016 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
2017 lto_binary_reader=lto-macho
2018 extra_headers=altivec.h
2020 powerpc*-*-freebsd*)
2021 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
2022 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2023 extra_options="${extra_options} rs6000/sysv4.opt"
2026 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2027 tmake_file="${tmake_file} rs6000/t-netbsd"
2028 extra_options="${extra_options} rs6000/sysv4.opt"
2031 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
2032 extra_options="${extra_options} rs6000/sysv4.opt"
2033 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2036 powerpc-*-eabisimaltivec*)
2037 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2038 extra_options="${extra_options} rs6000/sysv4.opt"
2039 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2043 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2044 extra_options="${extra_options} rs6000/sysv4.opt"
2045 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2049 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2050 extra_options="${extra_options} rs6000/sysv4.opt"
2051 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2053 powerpc-*-eabialtivec*)
2054 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2055 extra_options="${extra_options} rs6000/sysv4.opt"
2056 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2059 powerpc-xilinx-eabi*)
2060 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2061 extra_options="${extra_options} rs6000/sysv4.opt"
2062 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2066 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2067 extra_options="${extra_options} rs6000/sysv4.opt"
2068 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2072 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2073 extra_options="${extra_options} rs6000/sysv4.opt"
2074 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2076 powerpc-*-linux* | powerpc64-*-linux*)
2077 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
2078 extra_options="${extra_options} rs6000/sysv4.opt"
2079 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2082 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2083 echo "*** Configuration ${target} not supported" 1>&2
2086 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2090 test x$with_cpu != x || cpu_is_64bit=yes
2094 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2095 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2096 if test x$cpu_is_64bit = xyes; then
2097 tm_file="${tm_file} rs6000/default64.h"
2099 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2100 tmake_file="$tmake_file rs6000/t-linux64"
2101 extra_options="${extra_options} rs6000/linux64.opt"
2104 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2107 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
2109 powerpc*-*-linux*altivec*)
2110 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2111 powerpc*-*-linux*spe*)
2112 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2113 powerpc*-*-linux*paired*)
2114 tm_file="${tm_file} rs6000/750cl.h" ;;
2116 if test x${enable_secureplt} = xyes; then
2117 tm_file="rs6000/secureplt.h ${tm_file}"
2121 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
2122 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
2123 tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
2125 powerpc-*-gnu-gnualtivec*)
2126 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
2127 extra_options="${extra_options} rs6000/sysv4.opt"
2128 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2129 if test x$enable_threads = xyes; then
2134 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
2135 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2136 extra_options="${extra_options} rs6000/sysv4.opt"
2137 if test x$enable_threads = xyes; then
2141 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2142 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
2143 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
2144 extra_options="${extra_options} rs6000/sysv4.opt"
2145 extra_headers=ppc-asm.h
2148 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
2149 tmake_file="${tmake_file} rs6000/t-vxworksae"
2152 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2158 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2159 tmake_file="t-lynx rs6000/t-lynx"
2160 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2161 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2162 extra_options="${extra_options} lynx.opt"
2168 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2169 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2170 extra_options="${extra_options} rs6000/sysv4.opt"
2172 powerpcle-*-eabisim*)
2173 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2174 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2175 extra_options="${extra_options} rs6000/sysv4.opt"
2179 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2180 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2181 extra_options="${extra_options} rs6000/sysv4.opt"
2184 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2185 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2186 tmake_file=rs6000/t-aix43
2187 extra_options="${extra_options} rs6000/aix64.opt"
2190 use_gcc_stdint=provide
2193 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2194 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2195 extra_options="${extra_options} rs6000/aix64.opt"
2196 tmake_file=rs6000/t-aix43
2202 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2203 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2204 tmake_file=rs6000/t-aix52
2205 extra_options="${extra_options} rs6000/aix64.opt"
2211 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2212 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2213 tmake_file=rs6000/t-aix52
2214 extra_options="${extra_options} rs6000/aix64.opt"
2218 extra_headers=altivec.h
2220 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2221 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2222 tmake_file=rs6000/t-aix52
2223 extra_options="${extra_options} rs6000/aix64.opt"
2227 extra_headers=altivec.h
2230 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
2231 tmake_file="${tmake_file} rx/t-rx"
2234 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2237 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2238 tm_p_file=s390/s390-protos.h
2239 md_file=s390/s390.md
2240 extra_modes=s390/s390-modes.def
2241 out_file=s390/s390.c
2242 tmake_file="${tmake_file} s390/t-linux64"
2245 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2246 tm_p_file=s390/s390-protos.h
2247 md_file=s390/s390.md
2248 extra_modes=s390/s390-modes.def
2249 out_file=s390/s390.c
2250 extra_parts="crtbeginS.o crtendS.o"
2252 extra_options="${extra_options} s390/tpf.opt"
2255 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2256 tmake_file=score/t-score-elf
2257 extra_objs="score7.o score3.o"
2259 sh-*-elf* | sh[12346l]*-*-elf* | \
2260 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2261 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2262 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2263 sh64-*-netbsd* | sh64l*-*-netbsd*)
2264 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2265 if test x${with_endian} = x; then
2267 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2268 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2269 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2270 shl* | sh64l* | sh*-*-linux* | \
2271 sh5l* | sh-superh-elf) with_endian=little,big ;;
2272 sh[1234]*-*-*) with_endian=big ;;
2273 *) with_endian=big,little ;;
2276 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2277 # First word : the default endian.
2278 # Second word: the secondary endian (optional).
2279 case ${with_endian} in
2280 big) TM_ENDIAN_CONFIG=mb ;;
2281 little) TM_ENDIAN_CONFIG=ml ;;
2282 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2283 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2284 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2286 case ${with_endian} in
2287 little*) tm_file="sh/little.h ${tm_file}" ;;
2289 tm_file="${tm_file} dbxelf.h elfos.h"
2292 *) tm_file="${tm_file} svr4.h" ;;
2294 tm_file="${tm_file} sh/elf.h"
2296 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2297 tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
2298 sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2299 sh*-superh-elf) if test x$with_libgloss != xno; then
2301 tm_file="${tm_file} sh/newlib.h"
2303 tm_file="${tm_file} sh/embed-elf.h"
2304 tm_file="${tm_file} sh/superh.h"
2305 tmake_file="${tmake_file} sh/t-superh"
2306 extra_options="${extra_options} sh/superh.opt" ;;
2307 *) if test x$with_newlib = xyes \
2308 && test x$with_libgloss = xyes; then
2309 tm_file="${tm_file} sh/newlib.h"
2311 tm_file="${tm_file} sh/embed-elf.h" ;;
2315 # SHmedia, 32-bit ABI
2316 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2319 # SHmedia, 64-bit ABI
2320 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2323 tmake_file="${tmake_file} sh/t-netbsd"
2326 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2327 tm_file="${tm_file} sh/sh64.h"
2328 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2331 tmake_file="${tmake_file} sh/t-sh64"
2332 tm_file="${tm_file} sh/sh64.h"
2333 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2336 tmake_file="sh/t-symbian"
2337 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2338 c_target_objs="symbian-base.o symbian-c.o"
2339 cxx_target_objs="symbian-base.o symbian-cxx.o"
2340 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2343 tm_file="${tm_file} newlib-stdint.h"
2346 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2347 case `echo ${target} | sed 's/e[lb]-/-/'` in
2348 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2349 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2350 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2351 sh4a_single*) sh_cpu_target=sh4a-single ;;
2352 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2353 sh4al) sh_cpu_target=sh4al ;;
2354 sh4a*) sh_cpu_target=sh4a ;;
2355 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2356 sh4_single*) sh_cpu_target=sh4-single ;;
2357 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2358 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2359 sh3e*) sh_cpu_target=sh3e ;;
2360 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2361 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2362 sh2a_single*) sh_cpu_target=sh2a-single ;;
2363 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2364 sh2a*) sh_cpu_target=sh2a ;;
2365 sh2e*) sh_cpu_target=sh2e ;;
2366 sh2*) sh_cpu_target=sh2 ;;
2367 *) sh_cpu_target=sh1 ;;
2369 # did the user say --without-fp ?
2370 if test x$with_fp = xno; then
2371 case ${sh_cpu_target} in
2372 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2374 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2375 sh4*) sh_cpu_target=sh4-nofpu ;;
2376 sh3*) sh_cpu_target=sh3 ;;
2377 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2378 sh2*) sh_cpu_target=sh2 ;;
2379 *) echo --without-fp not available for $target: ignored
2381 tm_defines="$tm_defines STRICT_NOFPU=1"
2383 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2384 case $sh_cpu_default in
2385 sh5-64media-nofpu | sh5-64media | \
2386 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2387 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2388 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2389 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2390 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2391 "") sh_cpu_default=${sh_cpu_target} ;;
2392 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2394 sh_multilibs=${with_multilib_list}
2395 if test "$sh_multilibs" = "default" ; then
2397 sh64-superh-linux* | \
2398 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2399 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2400 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2401 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2402 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2403 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2405 if test x$with_fp = xno; then
2406 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2409 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2410 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2411 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2412 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2413 for sh_multilib in ${sh_multilibs}; do
2414 case ${sh_multilib} in
2415 m1 | m2 | m2e | m3 | m3e | \
2416 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2417 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2418 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2419 m5-64media | m5-64media-nofpu | \
2420 m5-32media | m5-32media-nofpu | \
2421 m5-compact | m5-compact-nofpu)
2422 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2423 # It is passed to MULTIILIB_OPTIONS verbatim.
2424 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2425 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2427 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2428 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2429 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2431 echo "with_multilib_list=${sh_multilib} not supported."
2436 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2437 if test x${enable_incomplete_targets} = xyes ; then
2438 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2440 tm_file="$tm_file ./sysroot-suffix.h"
2441 tmake_file="$tmake_file t-sysroot-suffix"
2444 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2445 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2448 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2449 tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2452 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2453 extra_options="${extra_options} sparc/long-double-switch.opt"
2456 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2457 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2458 extra_options="${extra_options} sparc/little-endian.opt"
2463 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2464 tmake_file="sparc/t-elf sparc/t-crtfm"
2465 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2467 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
2468 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
2469 extra_options="${extra_options} sparc/long-double-switch.opt"
2470 tmake_file="${tmake_file} sparc/t-linux"
2471 if test x$enable_targets = xall; then
2472 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2473 tmake_file="${tmake_file} sparc/t-linux64"
2475 tm_file="${tm_file} sparc/linux.h"
2477 tmake_file="${tmake_file} sparc/t-crtfm"
2480 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2481 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2482 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2485 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2486 extra_options="${extra_options} sparc/little-endian.opt"
2487 tmake_file="${tmake_file} sparc/t-crtfm t-rtems"
2488 extra_parts="crtbegin.o crtend.o"
2491 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2493 *-*-solaris2.1[0-9]*)
2494 tm_file="${tm_file} sol2-10.h"
2498 use_gcc_stdint=provide
2501 tm_file="${tm_file} sparc/sol2.h"
2503 sparc64-*-* | sparcv9-*-*)
2504 tm_file="${tm_file} sparc/sol2-64.h"
2507 test x$with_cpu != x || with_cpu=v9
2510 tm_file="${tm_file} sparc/sol2-bi.h"
2511 if test x$gas = xyes; then
2512 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2514 if test x$gnu_ld = xyes; then
2515 tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
2517 tm_file="${tm_file} tm-dwarf2.h"
2518 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2519 if test x$gnu_ld = xyes; then
2520 tmake_file="$tmake_file t-slibgcc-elf-ver"
2522 tmake_file="$tmake_file t-slibgcc-sld"
2524 if test x$gas = xyes; then
2525 tm_file="usegas.h ${tm_file}"
2527 c_target_objs="sol2-c.o"
2528 cxx_target_objs="sol2-c.o"
2530 tm_p_file="${tm_p_file} sol2-protos.h"
2531 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2532 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2533 "":yes:* | yes:yes:* )
2536 "":*:yes | yes:*:yes )
2542 tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2543 tmake_file="${tmake_file} sparc/t-vxworks"
2546 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2547 extra_options="${extra_options} sparc/little-endian.opt"
2548 tmake_file="${tmake_file} sparc/t-crtfm"
2549 extra_parts="crtbegin.o crtend.o"
2551 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2552 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2553 extra_options="${extra_options} sparc/long-double-switch.opt"
2554 tmake_file="${tmake_file} sparc/t-crtfm"
2555 case "x$with_cpu" in
2557 x) with_cpu=ultrasparc ;;
2558 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2561 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
2562 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
2563 extra_options="${extra_options} sparc/long-double-switch.opt"
2564 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2567 tm_file="sparc/biarch64.h ${tm_file}"
2568 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2569 extra_options="${extra_options} sparc/long-double-switch.opt"
2570 tmake_file="${tmake_file} sparc/t-netbsd64"
2573 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2574 tmake_file="spu/t-spu-elf"
2575 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2576 extra_modes=spu/spu-modes.def
2577 c_target_objs="${c_target_objs} spu-c.o"
2578 cxx_target_objs="${cxx_target_objs} spu-c.o"
2581 target_cpu_default="TARGET_CPU_v850e1"
2582 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2583 tm_p_file=v850/v850-protos.h
2584 tmake_file=v850/t-v850e
2585 md_file=v850/v850.md
2586 extra_modes=v850/v850-modes.def
2587 out_file=v850/v850.c
2588 extra_options="${extra_options} v850/v850.opt"
2589 if test x$stabs = xyes
2591 tm_file="${tm_file} dbx.h"
2594 c_target_objs="v850-c.o"
2595 cxx_target_objs="v850-c.o"
2599 target_cpu_default="TARGET_CPU_v850e"
2600 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2601 tm_p_file=v850/v850-protos.h
2602 tmake_file=v850/t-v850e
2603 md_file=v850/v850.md
2604 extra_modes=v850/v850-modes.def
2605 out_file=v850/v850.c
2606 extra_options="${extra_options} v850/v850.opt"
2607 if test x$stabs = xyes
2609 tm_file="${tm_file} dbx.h"
2612 c_target_objs="v850-c.o"
2613 cxx_target_objs="v850-c.o"
2617 target_cpu_default="TARGET_CPU_generic"
2618 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2619 tmake_file=v850/t-v850
2620 if test x$stabs = xyes
2622 tm_file="${tm_file} dbx.h"
2625 c_target_objs="v850-c.o"
2626 cxx_target_objs="v850-c.o"
2630 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
2631 tmake_file="${tmake_file} vax/t-linux"
2634 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2637 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2643 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2647 # For historical reasons, the target files omit the 'x'.
2648 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
2649 tm_p_file=stormy16/stormy16-protos.h
2650 md_file=stormy16/stormy16.md
2651 out_file=stormy16/stormy16.c
2652 extra_options=stormy16/stormy16.opt
2653 tmake_file="stormy16/t-stormy16"
2654 extra_parts="crtbegin.o crtend.o"
2657 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
2658 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2661 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
2662 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2665 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
2666 tmake_file="${tmake_file} mn10300/t-linux"
2668 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2672 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2673 tmake_file="${tmake_file} t-rtems"
2674 c_target_objs="m32c-pragma.o"
2675 cxx_target_objs="m32c-pragma.o"
2678 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2679 c_target_objs="m32c-pragma.o"
2680 cxx_target_objs="m32c-pragma.o"
2683 echo "*** Configuration ${target} not supported" 1>&2
2689 i[34567]86-*-linux* | x86_64-*-linux*)
2690 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2692 i[34567]86-*-* | x86_64-*-*)
2693 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2695 powerpc*-*-* | rs6000-*-*)
2696 tm_file="${tm_file} rs6000/option-defaults.h"
2699 # Support for --with-cpu and related options (and a few unrelated options,
2703 echo "--with-cpu must be passed a value" 1>&2
2708 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2709 # to generic if there is no processor scheduler model for the target.
2712 arch_without_sse2=no
2713 arch_without_64bit=no
2718 arch_without_sse2=yes
2719 arch_without_64bit=yes
2724 arch_without_sse2=yes
2725 arch_without_64bit=yes
2728 arch_without_sse2=yes
2729 arch_without_64bit=yes
2730 case ${target_noncanonical} in
2743 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2753 i686-*-* | i786-*-*)
2754 case ${target_noncanonical} in
2759 amdfam10-*|barcelona-*)
2763 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2767 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2771 athlon_xp-*|athlon_mp-*|athlon_4-*)
2774 arch_without_sse2=yes
2775 arch_without_64bit=yes
2777 athlon_tbird-*|athlon-*)
2780 arch_without_sse2=yes
2785 arch_without_sse2=yes
2790 arch_without_sse2=yes
2792 pentium3-*|pentium3m-*)
2795 arch_without_sse2=yes
2797 pentium4-*|pentium4m-*)
2824 arch_without_sse2=yes
2829 arch_without_sse2=yes
2830 arch_without_64bit=yes
2835 case ${target_noncanonical} in
2840 amdfam10-*|barcelona-*)
2844 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2848 k8-*|opteron-*|athlon_64-*)
2872 # If there is no $with_cpu option, try to infer one from ${target}.
2873 # This block sets nothing except for with_cpu.
2874 if test x$with_cpu = x ; then
2876 i[34567]86-*-*|x86_64-*-*)
2894 frv-*-*linux* | frv400-*-*linux*)
2901 case "$with_arch" in
2903 with_cpu=${default_cf_cpu}
2906 with_cpu=m${default_m68k_cpu}
2914 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2918 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2920 i[34567]86-*-*|x86_64-*-*)
2921 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2922 if test x$with_cpu_32 = x; then
2923 with_cpu_32=$with_cpu
2925 if test x$with_cpu_64 = x; then
2926 with_cpu_64=$with_cpu
2934 # Support for --with-arch and related options (and a few unrelated options,
2936 case ${with_arch} in
2938 echo "--with-arch must be passed a value" 1>&2
2943 # If there is no $with_arch option, try to infer one from ${target}.
2944 # This block sets nothing except for with_arch.
2945 if test x$with_arch = x ; then
2947 i[34567]86-*-darwin*|x86_64-*-darwin*)
2948 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2949 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2952 # --with-fpmath sets the default ISA to SSE2, which is the same
2953 # ISA supported by Pentium 4.
2954 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2965 # Avoid overriding --with-arch-32 and --with-arch-64 values.
2967 i[34567]86-*-darwin*|x86_64-*-darwin*)
2968 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2969 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2971 i[34567]86-*-*|x86_64-*-*)
2972 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2973 if test x$with_arch_32 = x; then
2974 with_arch_32=$with_arch
2976 if test x$with_arch_64 = x; then
2977 if test $arch_without_64bit = yes; then
2978 # Set the default 64bit arch to x86-64 if the default arch
2979 # doesn't support 64bit.
2982 with_arch_64=$with_arch
2986 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
2987 # Set the default 64bit arch to x86-64 if the default arch
2988 # doesn't support 64bit and we need 64bit ISA.
2989 with_arch_32=$with_arch
2997 # Support --with-fpmath.
2998 if test x$with_fpmath != x; then
3000 i[34567]86-*-* | x86_64-*-*)
3001 case ${with_fpmath} in
3003 tm_file="${tm_file} i386/ssemath.h"
3006 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3012 echo "--with-fpmath isn't supported for $target." 1>&2
3018 # Similarly for --with-schedule.
3019 if test x$with_schedule = x; then
3022 # Override default PA8000 scheduling model.
3023 with_schedule=7100LC
3028 # Validate and mark as valid any --with options supported
3029 # by this target. In order to use a particular --with option
3030 # you must list it in supported_defaults; validating the value
3031 # is optional. This case statement should set nothing besides
3032 # supported_defaults.
3037 supported_defaults="cpu tune"
3038 for which in cpu tune; do
3039 eval "val=\$with_$which"
3042 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3043 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3047 echo "Unknown CPU used in --with-$which=$val" 1>&2
3055 supported_defaults="arch cpu float tune fpu abi mode"
3056 for which in cpu tune; do
3057 # See if it matches any of the entries in arm-cores.def
3058 eval "val=\$with_$which"
3059 if [ x"$val" = x ] \
3060 || grep "^ARM_CORE(\"$val\"," \
3061 ${srcdir}/config/arm/arm-cores.def \
3064 new_val=`grep "^ARM_CORE(\"$val\"," \
3065 ${srcdir}/config/arm/arm-cores.def | \
3066 sed -e 's/^[^,]*,[ ]*//' | \
3068 eval "target_${which}_cname=$new_val"
3069 echo "For $val real value is $new_val"
3072 echo "Unknown CPU used in --with-$which=$val" 1>&2
3077 case "$with_arch" in
3079 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3080 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3081 | armv7 | armv7-a | armv7-r | armv7-m \
3086 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3091 case "$with_float" in
3093 | soft | hard | softfp)
3097 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3104 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
3105 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3106 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3107 | fpv4-sp-d16 | neon-vfpv4)
3111 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3118 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3122 echo "Unknown ABI used in --with-abi=$with_abi"
3127 case "$with_mode" in
3133 echo "Unknown mode used in --with-mode=$with_mode"
3138 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3139 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3144 supported_defaults=cpu
3149 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3155 fido-*-* | m68k*-*-*)
3156 supported_defaults="arch cpu"
3157 case "$with_arch" in
3159 m68k_arch_family="$with_arch"
3162 echo "Invalid --with-arch=$with_arch" 1>&2
3167 # We always have a $with_cpu setting here.
3169 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3170 m68k_cpu_ident=$with_cpu
3173 m68k_cpu_ident=m68020
3174 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3177 m68k_cpu_ident=m68020
3178 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3181 # We need the C identifier rather than the string.
3182 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3183 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3184 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3185 ${srcdir}/config/m68k/m68k-devices.def`
3186 if [ x"$m68k_cpu_ident" = x ] ; then
3187 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3190 with_cpu="mcpu=$with_cpu"
3196 supported_defaults="arch schedule"
3198 case "$with_arch" in
3199 "" | 1.0 | 1.1 | 2.0)
3203 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3208 case "$with_schedule" in
3209 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3213 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3219 i[34567]86-*-* | x86_64-*-*)
3220 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3221 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3222 eval "val=\$with_$which"
3225 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3226 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3227 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3228 | athlon-4 | athlon-xp | athlon-mp | geode \
3229 | prescott | pentium-m | pentium4m | pentium3m)
3236 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3244 "" | x86-64 | generic | native \
3245 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3246 | opteron-sse3 | athlon-fx | bdver1 | amdfam10 \
3247 | barcelona | nocona | core2 | atom)
3251 echo "Unknown CPU given in --with-$which=$val." 1>&2
3259 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3261 case ${with_float} in
3266 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3272 "" | 32 | o64 | n32 | 64 | eabi)
3276 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3281 case ${with_divide} in
3282 "" | breaks | traps)
3286 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3291 case ${with_llsc} in
3302 echo "Unknown llsc type used in --with-llsc" 1>&2
3307 case ${with_mips_plt} in
3312 with_mips_plt=no-plt
3317 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3322 case ${with_synci} in
3327 # No is the default.
3331 echo "Unknown synci type used in --with-synci" 1>&2
3337 powerpc*-*-* | rs6000-*-*)
3338 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3340 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3341 eval "val=\$with_$which"
3343 default32 | default64)
3348 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3352 with_which="with_$which"
3356 tm_defines="${tm_defines} CONFIG_PPC405CR"
3357 eval "with_$which=405"
3360 | power | power[234567] | power6x | powerpc | powerpc64 \
3361 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3362 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3363 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3364 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3365 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3366 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3370 echo "Unknown cpu used in --with-$which=$val." 1>&2
3378 supported_defaults="arch mode tune"
3380 for which in arch tune; do
3381 eval "val=\$with_$which"
3383 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3387 echo "Unknown cpu used in --with-$which=$val." 1>&2
3393 case ${with_mode} in
3398 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3404 sh[123456ble]-*-* | sh-*-*)
3405 supported_defaults="cpu"
3406 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3407 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3410 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3412 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3415 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3416 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3417 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3418 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3424 supported_defaults="cpu float tune"
3426 for which in cpu tune; do
3427 eval "val=\$with_$which"
3429 "" | sparc | sparcv9 | sparc64 | sparc86x \
3430 | v7 | cypress | v8 | supersparc | sparclite | f930 \
3431 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3432 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3436 echo "Unknown cpu used in --with-$which=$val" 1>&2
3442 case ${with_float} in
3447 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3454 supported_defaults="arch tune"
3456 for which in arch tune; do
3457 eval "val=\$with_$which"
3459 "" | cell | celledp)
3463 echo "Unknown cpu used in --with-$which=$val." 1>&2
3471 supported_defaults=cpu
3473 "" | v850e | v850e1)
3477 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3484 # Set some miscellaneous flags for particular targets.
3485 target_cpu_default2=
3488 if test x$gas = xyes
3490 target_cpu_default2="MASK_GAS"
3495 if test x$target_cpu_cname = x
3497 target_cpu_default2=TARGET_CPU_generic
3499 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3504 target_cpu_default2="MASK_BIG_SWITCH"
3505 if test x$gas = xyes
3507 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3511 fido*-*-* | m68k*-*-*)
3512 target_cpu_default2=$m68k_cpu_ident
3513 if [ x"$m68k_arch_family" != x ]; then
3514 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3518 i[34567]86-*-darwin* | x86_64-*-darwin*)
3519 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3521 i[34567]86-*-linux* | x86_64-*-linux* | \
3522 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3524 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3526 i[34567]86-*-solaris2*)
3527 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3529 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3530 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3532 i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3533 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3536 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3540 if test x$gnu_ld = xyes
3542 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3546 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3549 if test "x$enable_gofast" = xyes
3551 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3552 tmake_file="mips/t-gofast $tmake_file"
3554 tmake_file="mips/t-mips $tmake_file"
3558 powerpc*-*-* | rs6000-*-*)
3559 # FIXME: The PowerPC port uses the value set at compile time,
3560 # although it's only cosmetic.
3561 if test "x$with_cpu" != x
3563 target_cpu_default2="\\\"$with_cpu\\\""
3565 out_file=rs6000/rs6000.c
3566 c_target_objs="${c_target_objs} rs6000-c.o"
3567 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3568 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3570 if test x$enable_e500_double = xyes
3572 tm_file="$tm_file rs6000/e500-double.h"
3576 sh[123456ble]*-*-* | sh-*-*)
3577 c_target_objs="${c_target_objs} sh-c.o"
3578 cxx_target_objs="${cxx_target_objs} sh-c.o"
3582 # Some standard aliases.
3587 xsparcv9 | xsparc64)
3592 # The SPARC port checks this value at compile-time.
3593 target_cpu_default2="TARGET_CPU_$with_cpu"
3596 # FIXME: The v850 is "special" in that it does not support
3597 # runtime CPU selection, only --with-cpu.
3598 case "x$with_cpu" in
3602 target_cpu_default2="TARGET_CPU_$with_cpu"
3609 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3610 for option in $all_defaults
3612 eval "val=\$with_"`echo $option | sed s/-/_/g`
3613 if test -n "$val"; then
3614 case " $supported_defaults " in
3618 echo "This target does not support --with-$option." 2>&1
3619 echo "Valid --with options are: $supported_defaults" 2>&1
3626 t="{ \"$option\", \"$val\" }"
3628 t="${t}, { \"$option\", \"$val\" }"
3635 configure_default_options="{ { NULL, NULL} }"
3637 configure_default_options="{ ${t} }"
3640 if test "$target_cpu_default2" != ""
3642 if test "$target_cpu_default" != ""
3644 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3646 target_cpu_default=$target_cpu_default2