1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # out_file The name of the machine description C support
91 # file, if different from "$cpu_type/$cpu_type.c".
93 # md_file The name of the machine-description file, if
94 # different from "$cpu_type/$cpu_type.md".
96 # tmake_file A list of machine-description-specific
97 # makefile-fragments, if different from
98 # "$cpu_type/t-$cpu_type".
100 # extra_modes The name of the file containing a list of extra
101 # machine modes, if necessary and different from
102 # "$cpu_type/$cpu_type-modes.def".
104 # extra_objs List of extra objects that should be linked into
105 # the compiler proper (cc1, cc1obj, cc1plus)
106 # depending on target.
108 # extra_gcc_objs List of extra objects that should be linked into
109 # the compiler driver (gcc) depending on target.
111 # extra_headers List of used header files from the directory
112 # config/${cpu_type}.
114 # user_headers_inc_next_pre
115 # List of header file names of internal gcc header
116 # files, which should be prefixed by an include_next.
117 # user_headers_inc_next_post
118 # List of header file names of internal gcc header
119 # files, which should be postfixed by an include_next.
120 # use_gcc_tgmath If set, add tgmath.h to the list of used header
123 # use_gcc_stdint If "wrap", install a version of stdint.h that
124 # wraps the system's copy for hosted compilations;
125 # if "provide", provide a version of systems without
126 # such a system header; otherwise "none", do not
127 # provide such a header at all.
129 # extra_passes List of extra executables compiled for this target
130 # machine, used for compiling from source to object.
132 # extra_parts List of extra object files that should be compiled
133 # for this target machine.
135 # extra_programs Like extra_passes, but these are used when linking.
137 # extra_options List of target-dependent .opt files.
139 # c_target_objs List of extra target-dependent objects that be
140 # linked into the C compiler only.
142 # cxx_target_objs List of extra target-dependent objects that be
143 # linked into the C++ compiler only.
145 # fortran_target_objs List of extra target-dependent objects that be
146 # linked into the fortran compiler only.
148 # target_gtfiles List of extra source files with type information.
150 # xm_defines List of macros to define when compiling for the
153 # xm_file List of files to include when compiling for the
156 # use_collect2 Set to yes or no, depending on whether collect2
159 # target_cpu_default Set to override the default target model.
161 # gdb_needs_out_file_path
162 # Set to yes if gdb needs a dir command with
163 # `dirname $out_file`.
165 # thread_file Set to control which thread package to use.
167 # gas Set to yes or no depending on whether the target
168 # system normally uses GNU as.
170 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
171 # for this target. This is true if this target
172 # supports "long" or "wchar_t" wider than 32 bits,
173 # or BITS_PER_WORD is wider than 32 bits.
174 # The setting made here must match the one made in
175 # other locations such as libcpp/configure.ac
177 # configure_default_options
178 # Set to an initializer for configure_default_options
179 # in configargs.h, based on --with-cpu et cetera.
181 # The following variables are used in each case-construct to build up the
182 # outgoing variables:
184 # gnu_ld Set to yes or no depending on whether the target
185 # system normally uses GNU ld.
190 user_headers_inc_next_pre=
191 user_headers_inc_next_post=
205 # Set this to force installation and use of collect2.
207 # Set this to override the default target model.
209 # Set this if gdb needs a dir command with `dirname $out_file`
210 gdb_needs_out_file_path=
211 # Set this to control which thread package will be used.
213 # Reinitialize these from the flag values every loop pass, since some
214 # configure entries modify them.
216 gnu_ld="$gnu_ld_flag"
217 default_use_cxa_atexit=no
218 default_gnu_indirect_function=no
223 # Don't carry these over build->host->target. Please.
227 # Obsolete configurations.
229 # Avoid cases below matching.
232 | arm*-*-netbsdelf* \
233 | i[34567]86-*-netbsdelf* \
234 | powerpc*-*-linux* \
235 | vax-*-netbsdelf*) ;;
240 | i[34567]86-*-interix3* \
241 | i[34567]86-*-netbsd* \
247 | m68k-*-uclinuxoldabi* \
250 | sh*-*-symbianelf* \
253 if test "x$enable_obsolete" != xyes; then
254 echo "*** Configuration ${target} is obsolete." >&2
255 echo "*** Specify --enable-obsolete to build it anyway." >&2
256 echo "*** Support will be REMOVED in the next major release of GCC," >&2
257 echo "*** unless a maintainer comes forward." >&2
262 # Unsupported targets list. Do not put an entry in this list unless
263 # it would otherwise be caught by a more permissive pattern. The list
264 # should be in alphabetical order.
267 | i[34567]86-*-go32* \
268 | mips64orion*-*-rtems* \
270 | sparc-hal-solaris2* \
272 | *-*-freebsd[12] | *-*-freebsd[12].* \
273 | *-*-freebsd*aout* \
280 | *-*-solaris2.[0-7] \
281 | *-*-solaris2.[0-7].* \
285 echo "*** Configuration ${target} not supported" 1>&2
290 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
291 # updated in each machine entry. Also set default extra_headers for some
294 cpu_type=`echo ${target} | sed 's/-.*$//'`
299 tmake_file=m32c/t-m32c
304 extra_options="${extra_options} g.opt"
311 extra_headers="mmintrin.h arm_neon.h"
312 c_target_objs="arm-c.o"
313 cxx_target_objs="arm-c.o"
317 c_target_objs="avr-c.o"
318 cxx_target_objs="avr-c.o"
327 extra_options="${extra_options} g.opt"
329 moxie*) cpu_type=moxie
333 extra_headers=math-68881.h
337 c_target_objs="i386-c.o"
338 cxx_target_objs="i386-c.o"
339 extra_options="${extra_options} fused-madd.opt"
340 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
341 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
342 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
343 immintrin.h x86intrin.h avxintrin.h xopintrin.h
344 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
345 abmintrin.h bmiintrin.h tbmintrin.h"
349 c_target_objs="i386-c.o"
350 cxx_target_objs="i386-c.o"
351 extra_options="${extra_options} fused-madd.opt"
352 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
353 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
354 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
355 immintrin.h x86intrin.h avxintrin.h xopintrin.h
356 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
357 abmintrin.h bmiintrin.h tbmintrin.h"
361 extra_headers=ia64intrin.h
363 extra_options="${extra_options} g.opt fused-madd.opt"
369 extra_options="${extra_options} g.opt"
373 extra_options="${extra_options} g.opt"
376 extra_headers=math-68881.h
380 extra_options="${extra_options} g.opt"
385 extra_headers="loongson.h"
386 extra_options="${extra_options} g.opt"
393 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
396 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
400 extra_options="${extra_options} g.opt fused-madd.opt"
404 extra_options="${extra_options} g.opt fused-madd.opt"
408 extra_options="${extra_options} g.opt"
421 extra_options="${extra_options} fused-madd.opt"
423 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
424 sh[123456789lbe]*-*-* | sh-*-*)
429 extra_options="${extra_options} fused-madd.opt"
433 tm_file=${cpu_type}/${cpu_type}.h
434 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
436 tm_p_file=${cpu_type}/${cpu_type}-protos.h
439 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
441 extra_modes=${cpu_type}/${cpu_type}-modes.def
443 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
445 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
450 if test "x$enable_cld" = xyes; then
451 tm_defines="${tm_defines} USE_IX86_CLD=1"
453 if test "x$enable_frame_pointer" = xyes; then
454 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
456 tm_file="vxworks-dummy.h ${tm_file}"
459 tm_file="i386/biarch64.h ${tm_file}"
460 if test "x$enable_cld" = xyes; then
461 tm_defines="${tm_defines} USE_IX86_CLD=1"
463 if test "x$enable_frame_pointer" = xyes; then
464 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
466 tm_file="vxworks-dummy.h ${tm_file}"
470 # On a.out targets, we need to use collect2.
477 # Common C libraries.
478 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
480 # Common parts for widely ported systems.
483 tmake_file="t-darwin ${cpu_type}/t-darwin"
484 tm_file="${tm_file} darwin.h"
487 tm_file="${tm_file} darwin9.h"
489 *-*-darwin[12][0-9]*)
490 tm_file="${tm_file} darwin9.h darwin10.h"
493 tm_file="${tm_file} ${cpu_type}/darwin.h"
494 tm_p_file="${tm_p_file} darwin-protos.h"
495 target_gtfiles="\$(srcdir)/config/darwin.c"
496 extra_options="${extra_options} darwin.opt"
497 c_target_objs="${c_target_objs} darwin-c.o"
498 cxx_target_objs="${cxx_target_objs} darwin-c.o"
499 fortran_target_objs="darwin-f.o"
500 extra_objs="darwin.o"
501 extra_gcc_objs="darwin-driver.o"
502 default_use_cxa_atexit=yes
504 case ${enable_threads} in
505 "" | yes | posix) thread_file='posix' ;;
509 # This is the generic ELF configuration of FreeBSD. Later
510 # machine-specific sections may refine and add to this
513 # Due to tm_file entry ordering issues that vary between cpu
514 # architectures, we only define fbsd_tm_file to allow the
515 # machine-specific section to dictate the final order of all
516 # entries of tm_file with the minor exception that components
517 # of the tm_file set here will always be of the form:
519 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
521 # The machine-specific section should not tamper with this
522 # ordering but may order all other entries of tm_file as it
523 # pleases around the provided core setting.
526 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
527 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
528 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
529 tmake_file="t-slibgcc-elf-ver t-freebsd"
530 case ${enable_threads} in
532 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
536 tmake_file="${tmake_file} t-freebsd-thread"
537 # Before 5.0, FreeBSD can't bind shared libraries to -lc
538 # when "optionally" threaded via weak pthread_* checks.
540 *-*-freebsd[34] | *-*-freebsd[34].*)
541 tmake_file="${tmake_file} t-slibgcc-nolc-override"
546 echo 'Unknown thread configuration for FreeBSD'
550 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
551 extra_options="$extra_options rpath.opt freebsd.opt"
556 default_use_cxa_atexit=yes;;
558 # need_64bit_hwint=yes # system compiler has this for all arch!
561 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
562 extra_options="$extra_options gnu-user.opt"
563 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
566 case ${enable_threads} in
567 "" | yes | posix) thread_file='posix' ;;
569 tmake_file="t-slibgcc-elf-ver t-linux"
571 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
574 tmake_file="$tmake_file t-gnu";;
576 # glibc / uclibc / bionic switch.
577 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
580 extra_options="$extra_options linux.opt";;
582 tm_defines="$tm_defines SINGLE_LIBC";;
586 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
589 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
592 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
595 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
597 default_use_cxa_atexit=yes
600 # Add Android userspace support to Linux targets.
603 tm_file="$tm_file linux-android.h"
604 extra_options="$extra_options linux-android.opt"
607 # Enable compilation for Android by default for *android* targets.
610 tm_defines="$tm_defines ANDROID_DEFAULT=1"
613 tm_defines="$tm_defines ANDROID_DEFAULT=0"
618 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
622 # NetBSD 2.0 and later get POSIX threads enabled by default.
623 # Allow them to be explicitly enabled on any other version.
624 case ${enable_threads} in
627 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
629 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
635 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
639 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
640 # ELF configurations. We will clear extra_parts in the
641 # a.out configurations.
643 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
644 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
648 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
649 # default (unless overridden by --disable-__cxa_atexit).
651 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
652 default_use_cxa_atexit=yes
657 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
658 case ${enable_threads} in
661 tmake_file="${tmake_file} t-openbsd-thread"
665 *-*-openbsd2.*|*-*-openbsd3.[012])
666 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
670 case ${enable_threads} in
671 yes) thread_file='rtems' ;;
673 extra_options="${extra_options} rtems.opt"
677 extra_options="$extra_options gnu-user.opt"
679 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
682 extra_options="${extra_options} sol2.opt"
687 extra_options="${extra_options} vxworks.opt"
689 case ${enable_threads} in
691 "" | yes | vxworks) thread_file='vxworks' ;;
692 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
696 # Assume that newlib is being used and so __cxa_atexit is provided.
697 default_use_cxa_atexit=yes
703 # Support site-specific machine types.
705 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
706 tm_file=${cpu_type}/$rest.h
707 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
708 then xm_file=${cpu_type}/xm-$rest.h
710 if test -f $srcdir/config/${cpu_type}/t-$rest
711 then tmake_file=${cpu_type}/t-$rest
715 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
716 extra_options="${extra_options} alpha/elf.opt"
717 target_cpu_default="MASK_GAS"
718 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
721 tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
722 extra_options="${extra_options} alpha/elf.opt"
723 target_cpu_default="MASK_GAS"
724 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
727 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
728 extra_options="${extra_options} alpha/elf.opt"
729 target_cpu_default="MASK_GAS"
730 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
731 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
734 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
735 extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
737 target_cpu_default="MASK_GAS"
738 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
741 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
742 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
743 extra_options="${extra_options} openbsd.opt alpha/elf.opt"
744 # default x-alpha is only appropriate for dec-osf.
745 target_cpu_default="MASK_GAS"
746 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
749 if test x$stabs = xyes
751 tm_file="${tm_file} dbx.h"
753 if test x$gas != xyes
755 extra_passes="mips-tfile mips-tdump"
758 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
759 tm_file="${tm_file} alpha/osf5.h"
760 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
761 extra_options="${extra_options} rpath.opt alpha/osf5.opt"
762 extra_headers=va_list.h
763 use_gcc_stdint=provide
764 case ${enable_threads} in
767 tmake_file="${tmake_file} alpha/t-osf-pthread"
772 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
773 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
774 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
777 install_headers_dir=install-headers-cp
778 extra_options="${extra_options} vms/vms.opt"
781 tm_file="${tm_file} alpha/vms.h"
782 xm_file="alpha/xm-vms.h"
783 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
786 install_headers_dir=install-headers-cp
787 extra_options="${extra_options} vms/vms.opt"
790 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
791 extra_parts="crtinit.o crtfini.o"
794 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
795 extra_options="${extra_options} arm/vxworks.opt"
796 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
799 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
800 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
803 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
804 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
805 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
808 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
809 extra_options="${extra_options} netbsd.opt"
810 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
814 arm*-*-linux*) # ARM GNU/Linux with ELF
815 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
818 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
821 tmake_file="${tmake_file} t-linux arm/t-arm"
824 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
825 tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
826 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
827 # Define multilib configuration for arm-linux-androideabi.
830 tmake_file="$tmake_file arm/t-linux-androideabi"
833 # The BPABI long long divmod functions return a 128-bit value in
834 # registers r0-r3. Correctly modeling that requires the use of
837 # The EABI requires the use of __cxa_atexit.
838 default_use_cxa_atexit=yes
841 tmake_file="$tmake_file arm/t-linux"
844 tm_file="$tm_file arm/aout.h arm/arm.h"
845 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
847 arm*-*-uclinux*) # ARM ucLinux
848 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
849 tmake_file="arm/t-arm arm/t-arm-elf"
852 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
853 tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
854 tmake_file="$tmake_file arm/t-bpabi"
855 # The BPABI long long divmod functions return a 128-bit value in
856 # registers r0-r3. Correctly modeling that requires the use of
859 # The EABI requires the use of __cxa_atexit.
860 default_use_cxa_atexit=yes
862 tm_file="$tm_file arm/aout.h arm/arm.h"
863 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
866 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
867 tmake_file="arm/t-arm arm/t-arm-elf"
868 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
870 arm*-*-eabi* | arm*-*-symbianelf* )
871 # The BPABI long long divmod functions return a 128-bit value in
872 # registers r0-r3. Correctly modeling that requires the use of
875 default_use_cxa_atexit=yes
876 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
877 tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
878 tmake_file="arm/t-arm arm/t-arm-elf"
881 tm_file="$tm_file newlib-stdint.h"
882 tmake_file="${tmake_file} arm/t-bpabi"
886 tm_file="${tm_file} arm/symbian.h"
887 # We do not include t-bpabi for Symbian OS because the system
888 # provides its own implementation of the BPABI functions.
889 tmake_file="${tmake_file} arm/t-symbian"
892 tm_file="${tm_file} arm/aout.h arm/arm.h"
893 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
896 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
897 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
898 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
901 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
902 tmake_file="arm/t-arm arm/t-arm-elf"
903 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
906 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
907 tmake_file="arm/t-arm arm/t-wince-pe"
908 extra_options="${extra_options} arm/pe.opt"
912 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
913 tmake_file="arm/t-arm arm/t-pe"
915 extra_options="${extra_options} arm/pe.opt"
919 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
920 tmake_file="avr/t-avr t-rtems avr/t-rtems"
921 extra_gcc_objs="driver-avr.o avr-devices.o"
922 extra_objs="avr-devices.o"
925 tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
927 extra_gcc_objs="driver-avr.o avr-devices.o"
928 extra_objs="avr-devices.o"
931 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
932 tmake_file=bfin/t-bfin-elf
936 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
937 tmake_file=bfin/t-bfin-uclinux
941 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
942 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
943 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
947 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
948 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
951 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
952 tmake_file=bfin/t-bfin
956 crisv32-*-elf | crisv32-*-none)
957 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
958 tmake_file="cris/t-cris"
959 target_cpu_default=32
961 extra_options="${extra_options} cris/elf.opt"
964 cris-*-elf | cris-*-none)
965 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
966 tmake_file="cris/t-cris cris/t-elfmulti"
968 extra_options="${extra_options} cris/elf.opt"
971 crisv32-*-linux* | cris-*-linux*)
972 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
973 # We need to avoid using t-linux, so override default tmake_file
974 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
975 extra_options="${extra_options} cris/linux.opt"
978 target_cpu_default=10
981 target_cpu_default=32
986 tm_file="elfos.h newlib-stdint.h ${tm_file}"
987 extra_parts="crtbegin.o crtend.o"
991 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
992 tmake_file=fr30/t-fr30
993 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
996 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
997 tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
1001 tm_file="dbxelf.h elfos.h ${tm_file} \
1002 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1003 tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
1004 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1009 tm_file="dbxelf.h elfos.h ${tm_file}"
1010 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1011 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
1016 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1017 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1018 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
1021 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp t-rtems"
1022 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1025 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
1026 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1029 tmake_file="h8300/t-h8300 h8300/t-elf"
1030 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1033 target_cpu_default="MASK_PA_11|MASK_PA_20"
1034 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1035 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1037 tmake_file="${tmake_file} pa/t-linux64"
1039 need_64bit_hwint=yes
1042 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1043 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1044 pa/pa32-regs.h pa/pa32-linux.h"
1045 tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
1046 # Set the libgcc version number
1047 if test x$sjlj = x1; then
1048 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1050 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1053 # port not yet contributed.
1055 # target_cpu_default="MASK_PA_11"
1057 hppa[12]*-*-hpux10*)
1059 hppa1.1-*-* | hppa2*-*-*)
1060 target_cpu_default="MASK_PA_11"
1063 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1064 pa/pa-hpux.h pa/pa-hpux10.h"
1065 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
1068 tm_file="${tm_file} pa/pa-hpux1010.h"
1069 extra_options="${extra_options} pa/pa-hpux1010.opt"
1072 use_gcc_stdint=provide
1073 tm_file="${tm_file} hpux-stdint.h"
1074 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
1075 case ${enable_threads} in
1077 if test x$have_pthread_h = xyes ; then
1078 tmake_file="${tmake_file} pa/t-dce-thr"
1082 tmake_file="${tmake_file} pa/t-dce-thr"
1085 # Set the libgcc version number
1086 if test x$sjlj = x1; then
1087 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1089 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1093 if test "x$with_dwarf2" != x; then
1094 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1099 target_cpu_default="MASK_PA_11|MASK_PA_20"
1100 if test x$gnu_ld = xyes
1102 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1104 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1105 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1109 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1110 extra_options="${extra_options} pa/pa-hpux1111.opt"
1113 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1116 extra_options="${extra_options} pa/pa-hpux.opt \
1117 pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1118 need_64bit_hwint=yes
1119 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1120 # Set the libgcc version number
1121 if test x$sjlj = x1; then
1122 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1124 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1126 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1128 case x${enable_threads} in
1136 use_gcc_stdint=provide
1137 tm_file="${tm_file} hpux-stdint.h"
1141 tm_file="${tm_file} hpux-stdint.h"
1145 hppa[12]*-*-hpux11*)
1147 hppa1.1-*-* | hppa2*-*-*)
1148 target_cpu_default="MASK_PA_11"
1151 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1152 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1153 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
1157 tm_file="${tm_file} pa/pa-hpux1111.h"
1158 extra_options="${extra_options} pa/pa-hpux1111.opt"
1161 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1162 # Set the libgcc version number
1163 if test x$sjlj = x1; then
1164 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1166 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1168 case x${enable_threads} in
1177 use_gcc_stdint=provide
1178 tm_file="${tm_file} hpux-stdint.h"
1182 tm_file="${tm_file} hpux-stdint.h"
1185 if test "x$with_dwarf2" != x; then
1186 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1190 i[34567]86-*-darwin*)
1191 need_64bit_hwint=yes
1193 # Baseline choice for a machine that allows m64 support.
1194 with_cpu=${with_cpu:-core2}
1195 tmake_file="${tmake_file} t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1198 with_cpu=${with_cpu:-core2}
1199 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1200 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1203 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1204 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1207 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1208 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1210 i[34567]86-*-freebsd*)
1211 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1214 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1215 tmake_file="${tmake_file} i386/t-crtstuff"
1217 i[34567]86-*-netbsdelf*)
1218 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1219 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1221 i[34567]86-*-netbsd*)
1222 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1223 extra_options="${extra_options} netbsd.opt"
1224 tmake_file="${tmake_file} t-netbsd"
1229 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1230 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1231 tmake_file="${tmake_file} i386/t-crtstuff"
1233 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1234 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1235 extra_options="${extra_options} openbsd.opt"
1236 # needed to unconfuse gdb
1237 tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1238 # we need collect2 until our bug is fixed...
1241 i[34567]86-*-openbsd*)
1242 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1243 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1244 extra_options="${extra_options} openbsd.opt"
1248 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1249 # Intel 80386's running GNU/*
1250 # with ELF format using glibc 2
1251 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
1253 i[34567]86-*-linux*)
1254 # Assume modern glibc
1255 default_gnu_indirect_function=yes
1256 if test x$enable_targets = xall; then
1257 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1258 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1259 tmake_file="${tmake_file} i386/t-linux64"
1260 need_64bit_hwint=yes
1262 case X"${with_cpu}" in
1263 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1266 if test x$with_cpu_64 = x; then
1271 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1272 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1277 tm_file="${tm_file} i386/linux.h"
1280 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1281 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1282 i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1283 i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1285 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1287 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1288 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h \
1289 i386/x86-64.h i386/linux64.h"
1292 default_gnu_indirect_function=glibc-2011 ;;
1293 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1294 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1296 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1298 i[34567]86-pc-msdosdjgpp*)
1299 xm_file=i386/xm-djgpp.h
1300 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1301 tmake_file="${tmake_file} i386/t-djgpp"
1302 extra_options="${extra_options} i386/djgpp.opt"
1307 i[34567]86-*-lynxos*)
1309 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1310 tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1311 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1312 extra_options="${extra_options} lynx.opt"
1317 i[3456x]86-*-netware*)
1318 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h tm-dwarf2.h i386/netware.h"
1319 tmake_file="${tmake_file} i386/t-netware"
1320 extra_objs=netware.o
1321 extra_options="${extra_options} i386/netware.opt"
1324 extra_objs="$extra_objs nwld.o"
1325 tm_file="${tm_file} i386/nwld.h"
1326 tmake_file="${tmake_file} i386/t-nwld"
1327 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1330 case x${enable_threads} in
1331 x | xyes | xposix) thread_file='posix';;
1332 xnks) thread_file='nks';;
1334 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1337 i[34567]86-*-nto-qnx*)
1338 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
1339 extra_options="${extra_options} i386/nto.opt"
1340 tmake_file="${tmake_file} i386/t-nto"
1344 i[34567]86-*-rtems*)
1345 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1346 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1347 tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1349 i[34567]86-*-solaris2*)
1350 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sysv4.h sol2.h"
1351 # Set default arch_32 to pentium4, tune_32 to generic like the other
1352 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1355 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1357 with_arch_32=${with_arch_32:-pentiumpro}
1360 with_arch_32=${with_arch_32:-pentium4}
1363 with_tune_32=${with_tune_32:-generic}
1365 *-*-solaris2.1[0-9]*)
1366 tm_file="${tm_file} sol2-10.h"
1369 tm_file="${tm_file} i386/sol2.h"
1370 if test x$gnu_ld = xyes; then
1371 tm_file="${tm_file} sol2-gld.h"
1373 if test x$gas = xyes; then
1374 tm_file="${tm_file} i386/sol2-gas.h"
1376 tmake_file="${tmake_file} t-sol2 t-svr4"
1377 c_target_objs="${c_target_objs} sol2-c.o"
1378 cxx_target_objs="${cxx_target_objs} sol2-c.o"
1380 tm_p_file="${tm_p_file} sol2-protos.h"
1381 if test x$gnu_ld = xyes; then
1382 tmake_file="$tmake_file t-slibgcc-elf-ver"
1383 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1385 tmake_file="$tmake_file t-slibgcc-sld"
1387 if test x$gas = xyes; then
1388 tm_file="usegas.h ${tm_file}"
1390 tm_file="$tm_file tm-dwarf2.h"
1392 *-*-solaris2.1[0-9]*)
1393 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1394 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1395 tmake_file="$tmake_file i386/t-sol2-10"
1396 # i386/t-crtstuff only affects libgcc. Its inclusion
1397 # depends on a runtime test and is thus performed in
1398 # libgcc/configure.ac instead.
1399 need_64bit_hwint=yes
1402 case X"${with_cpu}" in
1403 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1406 if test x$with_cpu_64 = x; then
1411 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1412 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1418 use_gcc_stdint=provide
1421 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1422 "":yes:* | yes:yes:* )
1425 "":*:yes | yes:*:yes )
1430 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1431 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
1434 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1435 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1438 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1439 tmake_file="${tmake_file} i386/t-vxworks"
1443 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1444 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1445 xm_file=i386/xm-cygwin.h
1446 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1447 if test x$sjlj = x0; then
1448 tmake_eh_file="i386/t-dw2-eh"
1450 tmake_eh_file="i386/t-sjlj-eh"
1452 # Shared libgcc DLL install dir depends on cross/native build.
1453 if test x${host} = x${target} ; then
1454 tmake_dlldir_file="i386/t-dlldir"
1456 tmake_dlldir_file="i386/t-dlldir-x"
1458 tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming i386/t-cygwin t-dfprules"
1459 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1460 extra_options="${extra_options} i386/cygming.opt"
1461 extra_objs="winnt.o winnt-stubs.o"
1462 c_target_objs="${c_target_objs} msformat-c.o"
1463 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1464 if test x$enable_threads = xyes; then
1469 i[34567]86-*-mingw* | x86_64-*-mingw*)
1470 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1471 xm_file=i386/xm-mingw32.h
1473 x86_64-*-* | *-w64-*)
1474 need_64bit_hwint=yes
1480 # This makes the logic if mingw's or the w64 feature set has to be used
1483 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1484 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1485 tm_file="${tm_file} i386/mingw-w64.h"
1486 if test x$enable_targets = xall; then
1487 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1488 case X"${with_cpu}" in
1489 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1492 if test x$with_cpu_64 = x; then
1497 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1498 echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1507 tm_file="${tm_file} i386/mingw-stdint.h"
1508 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1509 if test x$sjlj = x0; then
1510 tmake_eh_file="i386/t-dw2-eh"
1512 tmake_eh_file="i386/t-sjlj-eh"
1514 # Shared libgcc DLL install dir depends on cross/native build.
1515 if test x${host} = x${target} ; then
1516 tmake_dlldir_file="i386/t-dlldir"
1518 tmake_dlldir_file="i386/t-dlldir-x"
1520 tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming t-dfprules"
1523 tmake_file="${tmake_file} i386/t-mingw-w64"
1526 tmake_file="${tmake_file} i386/t-mingw-w32"
1529 tmake_file="${tmake_file} i386/t-mingw32"
1532 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1533 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1536 extra_options="${extra_options} i386/mingw-w64.opt"
1541 extra_objs="winnt.o winnt-stubs.o"
1542 c_target_objs="${c_target_objs} msformat-c.o"
1543 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1544 default_use_cxa_atexit=yes
1546 case ${enable_threads} in
1547 "" | yes | win32) thread_file='win32'
1548 tmake_file="${tmake_file} i386/t-gthr-win32"
1553 tmake_file="${tmake_file} i386/t-crtfm"
1560 tm_file="${tm_file} i386/crtdll.h"
1562 *mingw32msv* | *mingw*)
1566 i[34567]86-*-interix3*)
1567 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1568 tmake_file="${tmake_file} i386/t-interix"
1569 extra_options="${extra_options} rpath.opt interix.opt"
1571 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1572 if test x$enable_threads = xyes ; then
1575 if test x$stabs = xyes ; then
1576 tm_file="${tm_file} dbxcoff.h"
1580 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1581 tmake_file="ia64/t-ia64"
1582 target_cpu_default="0"
1583 if test x$gas = xyes
1585 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1587 if test x$gnu_ld = xyes
1589 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1591 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1594 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1595 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1596 tmake_file="${tmake_file} ia64/t-ia64"
1597 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1600 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1601 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1602 if test x$with_system_libunwind != xyes ; then
1603 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1605 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1606 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1609 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
1610 tmake_file="ia64/t-ia64 ia64/t-hpux"
1611 target_cpu_default="MASK_GNU_AS"
1612 case x$enable_threads in
1618 c_target_objs="ia64-c.o"
1619 cxx_target_objs="ia64-c.o"
1620 extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
1622 tm_file="${tm_file} hpux-stdint.h"
1625 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1626 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1627 tmake_file="vms/t-vms ia64/t-ia64 ia64/t-vms"
1628 xmake_file=vms/x-vms
1629 target_cpu_default="0"
1630 if test x$gas = xyes
1632 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1635 install_headers_dir=install-headers-cp
1636 extra_options="${extra_options} vms/vms.opt ia64/vms.opt"
1639 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
1640 tmake_file=iq2000/t-iq2000
1641 out_file=iq2000/iq2000.c
1642 md_file=iq2000/iq2000.md
1645 tm_file="dbxelf.h elfos.h ${tm_file}"
1646 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1649 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1650 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1651 tmake_file="${tmake_file} t-rtems"
1654 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
1655 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1658 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1659 extra_parts="crtinit.o crtfini.o"
1662 tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
1663 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1666 tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1667 tmake_file="m32r/t-m32r t-rtems"
1668 extra_parts="crtinit.o crtfini.o"
1671 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1672 # We override the tmake_file for linux -- why?
1673 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1675 if test x$enable_threads = xyes; then
1680 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1681 # We override the tmake_file for linux -- why?
1682 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1684 if test x$enable_threads = xyes; then
1688 # m68hc11 and m68hc12 share the same machine description.
1689 m68hc11-*-*|m6811-*-*)
1690 tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1691 tm_p_file="m68hc11/m68hc11-protos.h"
1692 md_file="m68hc11/m68hc11.md"
1693 out_file="m68hc11/m68hc11.c"
1694 tmake_file="m68hc11/t-m68hc11"
1697 m68hc12-*-*|m6812-*-*)
1698 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1699 tm_p_file="m68hc11/m68hc11-protos.h"
1700 md_file="m68hc11/m68hc11.md"
1701 out_file="m68hc11/m68hc11.c"
1702 tmake_file="m68hc11/t-m68hc11"
1703 extra_options="${extra_options} m68hc11/m68hc11.opt"
1706 m68k-*-elf* | fido-*-elf*)
1709 # Check that $with_cpu makes sense.
1714 echo "Cannot accept --with-cpu=$with_cpu"
1721 default_m68k_cpu=68020
1725 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1726 tm_defines="${tm_defines} MOTOROLA=1"
1727 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1728 # Add multilibs for targets other than fido.
1733 tmake_file="$tmake_file m68k/t-mlibs"
1736 extra_parts="crtbegin.o crtend.o"
1739 default_m68k_cpu=68020
1741 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1742 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1743 tm_defines="${tm_defines} MOTOROLA=1"
1746 default_m68k_cpu=68020
1748 # needed to unconfuse gdb
1749 tm_defines="${tm_defines} OBSD_OLD_GAS"
1750 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1751 extra_options="${extra_options} openbsd.opt"
1752 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1753 # we need collect2 until our bug is fixed...
1756 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1757 # with uClibc, using the original
1758 # m68k-elf-based ABI
1759 default_m68k_cpu=68020
1761 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1762 tm_defines="${tm_defines} MOTOROLA=1"
1763 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1765 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1766 # with uClibc, using the new GNU/Linux-style
1768 default_m68k_cpu=68020
1770 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1771 tm_defines="${tm_defines} MOTOROLA=1"
1772 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1774 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1775 # with ELF format using glibc 2
1776 # aka the GNU/Linux C library 6.
1777 default_m68k_cpu=68020
1779 with_arch=${with_arch:-m68k}
1780 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1781 extra_options="${extra_options} m68k/ieee.opt"
1782 tm_defines="${tm_defines} MOTOROLA=1"
1783 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1784 # if not configured with --enable-sjlj-exceptions, bump the
1785 # libgcc version number
1786 if test x$sjlj != x1; then
1787 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1791 default_m68k_cpu=68020
1793 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1794 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1795 tm_defines="${tm_defines} MOTOROLA=1"
1796 extra_parts="crtbegin.o crtend.o"
1799 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1800 tmake_file=mcore/t-mcore
1804 tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1805 tmake_file=mcore/t-mcore-pe
1810 tm_file="dbxelf.h elfos.h ${tm_file}"
1811 tmake_file=mep/t-mep
1812 extra_parts="crtbegin.o crtend.o"
1813 c_target_objs="mep-pragma.o"
1814 cxx_target_objs="mep-pragma.o"
1815 if test -d "${srcdir}/../newlib/libc/include" &&
1816 test "x$with_headers" = x; then
1822 tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
1823 c_target_objs="${c_target_objs} microblaze-c.o"
1824 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1825 tmake_file="${tmake_file} t-slibgcc-elf-ver t-slibgcc-nolc-override t-linux microblaze/t-microblaze"
1826 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o crtbeginT.o"
1829 tm_file="${tm_file} dbxelf.h"
1830 c_target_objs="${c_target_objs} microblaze-c.o"
1831 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1832 tmake_file="${tmake_file} microblaze/t-microblaze"
1835 tm_file="elfos.h ${tm_file} mips/iris6.h"
1836 tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
1837 extra_options="${extra_options} rpath.opt mips/iris6.opt"
1838 target_cpu_default="MASK_ABICALLS"
1839 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1840 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1842 if test "x$stabs" = xyes
1844 tm_file="${tm_file} dbx.h"
1846 if test "x$gnu_ld" = xyes
1848 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1850 case ${enable_threads}:${have_pthread_h} in
1851 "":yes | yes:yes ) thread_file=posix ;;
1854 mips*-*-netbsd*) # NetBSD/mips, either endian.
1855 target_cpu_default="MASK_ABICALLS"
1856 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1857 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1859 mips64*-*-linux* | mipsisa64*-*-linux*)
1860 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1861 tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1862 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1864 mips64el-st-linux-gnu)
1865 tm_file="${tm_file} mips/st.h"
1866 tmake_file="${tmake_file} mips/t-st"
1868 mips64octeon*-*-linux*)
1869 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1870 target_cpu_default=MASK_SOFT_FLOAT_ABI
1872 mipsisa64r2*-*-linux*)
1873 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1876 extra_parts="$extra_parts crtfastmath.o"
1879 test x$with_llsc != x || with_llsc=yes
1881 mips*-*-linux*) # Linux MIPS, either endian.
1882 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1883 tmake_file="${tmake_file} mips/t-libgcc-mips16"
1886 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1889 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1891 extra_parts="$extra_parts crtfastmath.o"
1892 test x$with_llsc != x || with_llsc=yes
1895 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1896 target_cpu_default="MASK_ABICALLS"
1897 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1898 extra_options="${extra_options} openbsd.opt"
1901 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1902 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1906 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1907 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1908 extra_options="${extra_options} mips/sde.opt"
1909 case "${with_newlib}" in
1911 # newlib / libgloss.
1914 # MIPS toolkit libraries.
1915 tm_file="$tm_file mips/sdemtk.h"
1916 tmake_file="$tmake_file mips/t-sdemtk"
1917 case ${enable_threads} in
1919 thread_file='mipssde'
1926 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1929 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1932 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1935 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1939 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1940 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1941 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1942 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1943 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1944 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1947 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1950 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1953 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1956 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1960 mipsisa32*-*-elfoabi*)
1961 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1962 tm_file="${tm_file} mips/elfoabi.h"
1964 mipsisa64*-*-elfoabi*)
1965 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1966 tm_file="${tm_file} mips/elfoabi.h"
1969 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1973 mipsisa64sr71k-*-elf*)
1974 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1975 tmake_file=mips/t-sr71k
1976 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1977 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1979 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1980 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1981 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1982 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1983 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1985 mips-*-elf* | mipsel-*-elf*)
1986 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1987 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1989 mips64-*-elf* | mips64el-*-elf*)
1990 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1991 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1992 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1993 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1995 mips64vr-*-elf* | mips64vrel-*-elf*)
1996 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1997 tmake_file=mips/t-vr
1998 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
2000 mips64orion-*-elf* | mips64orionel-*-elf*)
2001 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
2002 tmake_file="mips/t-elf mips/t-libgcc-mips16"
2003 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
2004 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
2007 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
2008 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
2011 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
2012 tmake_file="${tmake_file} mips/t-vxworks"
2014 mipstx39-*-elf* | mipstx39el-*-elf*)
2015 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
2016 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
2018 mmix-knuth-mmixware)
2019 tm_file="${tm_file} newlib-stdint.h"
2020 need_64bit_hwint=yes
2024 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2025 if test x$stabs = xyes
2027 tm_file="${tm_file} dbx.h"
2033 tm_file="${tm_file} newlib-stdint.h"
2037 tm_file="${tm_file} newlib-stdint.h"
2039 tmake_file="picochip/t-picochip t-pnt16-warn"
2041 # port not yet contributed
2042 #powerpc-*-openbsd*)
2043 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
2047 extra_options="${extra_options} rs6000/darwin.opt"
2048 extra_parts="crt2.o"
2050 *-darwin1[0-9]* | *-darwin[8-9]*)
2051 tmake_file="${tmake_file} rs6000/t-darwin8"
2052 tm_file="${tm_file} rs6000/darwin8.h"
2055 tm_file="${tm_file} rs6000/darwin7.h"
2060 tmake_file="${tmake_file} t-slibgcc-darwin"
2061 extra_headers=altivec.h
2063 powerpc64-*-darwin*)
2064 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2065 extra_parts="crt2.o"
2066 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin"
2067 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
2068 extra_headers=altivec.h
2070 powerpc*-*-freebsd*)
2071 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
2072 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2073 extra_options="${extra_options} rs6000/sysv4.opt"
2076 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2077 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2078 tmake_file="${tmake_file} rs6000/t-netbsd"
2079 extra_options="${extra_options} rs6000/sysv4.opt"
2082 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
2083 extra_options="${extra_options} rs6000/sysv4.opt"
2084 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2087 powerpc-*-eabisimaltivec*)
2088 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2089 extra_options="${extra_options} rs6000/sysv4.opt"
2090 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2094 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2095 extra_options="${extra_options} rs6000/sysv4.opt"
2096 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2100 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2101 extra_options="${extra_options} rs6000/sysv4.opt"
2102 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2104 powerpc-*-eabialtivec*)
2105 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2106 extra_options="${extra_options} rs6000/sysv4.opt"
2107 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2110 powerpc-xilinx-eabi*)
2111 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2112 extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
2113 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2117 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2118 extra_options="${extra_options} rs6000/sysv4.opt"
2119 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2123 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2124 extra_options="${extra_options} rs6000/sysv4.opt"
2125 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2127 powerpc-*-linux* | powerpc64-*-linux*)
2128 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
2129 extra_options="${extra_options} rs6000/sysv4.opt"
2130 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2133 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2134 echo "*** Configuration ${target} not supported" 1>&2
2137 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2141 test x$with_cpu != x || cpu_is_64bit=yes
2145 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2146 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2147 if test x$cpu_is_64bit = xyes; then
2148 tm_file="${tm_file} rs6000/default64.h"
2150 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2151 tmake_file="$tmake_file rs6000/t-linux64"
2152 extra_options="${extra_options} rs6000/linux64.opt"
2155 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2158 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
2160 powerpc*-*-linux*altivec*)
2161 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2162 powerpc*-*-linux*spe*)
2163 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2164 powerpc*-*-linux*paired*)
2165 tm_file="${tm_file} rs6000/750cl.h" ;;
2167 if test x${enable_secureplt} = xyes; then
2168 tm_file="rs6000/secureplt.h ${tm_file}"
2172 tm_file="${tm_file} elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
2173 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
2174 tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
2176 powerpc-*-gnu-gnualtivec*)
2177 tm_file="${cpu_type}/${cpu_type}.h elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
2178 extra_options="${extra_options} rs6000/sysv4.opt"
2179 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2180 if test x$enable_threads = xyes; then
2185 tm_file="${cpu_type}/${cpu_type}.h elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
2186 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2187 extra_options="${extra_options} rs6000/sysv4.opt"
2188 if test x$enable_threads = xyes; then
2192 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2193 tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
2194 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
2195 extra_options="${extra_options} rs6000/sysv4.opt"
2196 extra_headers=ppc-asm.h
2199 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
2200 tmake_file="${tmake_file} rs6000/t-vxworksae"
2203 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2209 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2210 tmake_file="t-lynx rs6000/t-lynx"
2211 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2212 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2218 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2219 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2220 extra_options="${extra_options} rs6000/sysv4.opt"
2222 powerpcle-*-eabisim*)
2223 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2224 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2225 extra_options="${extra_options} rs6000/sysv4.opt"
2229 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2230 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2231 extra_options="${extra_options} rs6000/sysv4.opt"
2234 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2235 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2236 tmake_file=rs6000/t-aix43
2237 extra_options="${extra_options} rs6000/aix64.opt"
2240 use_gcc_stdint=provide
2243 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2244 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2245 extra_options="${extra_options} rs6000/aix64.opt"
2246 tmake_file=rs6000/t-aix43
2252 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2253 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2254 tmake_file=rs6000/t-aix52
2255 extra_options="${extra_options} rs6000/aix64.opt"
2261 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2262 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2263 tmake_file=rs6000/t-aix52
2264 extra_options="${extra_options} rs6000/aix64.opt"
2268 extra_headers=altivec.h
2270 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2271 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2272 tmake_file=rs6000/t-aix52
2273 extra_options="${extra_options} rs6000/aix64.opt"
2277 extra_headers=altivec.h
2280 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
2281 tmake_file="${tmake_file} rx/t-rx"
2284 tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2287 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2288 tm_p_file=s390/s390-protos.h
2289 md_file=s390/s390.md
2290 extra_modes=s390/s390-modes.def
2291 out_file=s390/s390.c
2292 tmake_file="${tmake_file} s390/t-linux64"
2295 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
2296 tm_p_file=s390/s390-protos.h
2297 md_file=s390/s390.md
2298 extra_modes=s390/s390-modes.def
2299 out_file=s390/s390.c
2300 extra_parts="crtbeginS.o crtendS.o"
2302 extra_options="${extra_options} s390/tpf.opt"
2305 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2306 tmake_file=score/t-score-elf
2307 extra_objs="score7.o score3.o"
2309 sh-*-elf* | sh[12346l]*-*-elf* | \
2310 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2311 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2312 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2313 sh64-*-netbsd* | sh64l*-*-netbsd*)
2314 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2315 if test x${with_endian} = x; then
2317 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2318 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2319 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2320 shl* | sh64l* | sh*-*-linux* | \
2321 sh5l* | sh-superh-elf) with_endian=little,big ;;
2322 sh[1234]*-*-*) with_endian=big ;;
2323 *) with_endian=big,little ;;
2326 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2327 # First word : the default endian.
2328 # Second word: the secondary endian (optional).
2329 case ${with_endian} in
2330 big) TM_ENDIAN_CONFIG=mb ;;
2331 little) TM_ENDIAN_CONFIG=ml ;;
2332 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2333 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2334 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2336 case ${with_endian} in
2337 little*) tm_file="sh/little.h ${tm_file}" ;;
2339 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
2341 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2342 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
2344 tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
2345 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2348 sh*-superh-elf) if test x$with_libgloss != xno; then
2350 tm_file="${tm_file} sh/newlib.h"
2352 tm_file="${tm_file} sh/embed-elf.h"
2353 tm_file="${tm_file} sh/superh.h"
2354 tmake_file="${tmake_file} sh/t-superh"
2355 extra_options="${extra_options} sh/superh.opt" ;;
2356 *) if test x$with_newlib = xyes \
2357 && test x$with_libgloss = xyes; then
2358 tm_file="${tm_file} sh/newlib.h"
2360 tm_file="${tm_file} sh/embed-elf.h" ;;
2364 # SHmedia, 32-bit ABI
2365 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2368 # SHmedia, 64-bit ABI
2369 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2372 tmake_file="${tmake_file} sh/t-netbsd"
2375 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2376 tm_file="${tm_file} sh/sh64.h"
2377 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2380 tmake_file="${tmake_file} sh/t-sh64"
2381 tm_file="${tm_file} sh/sh64.h"
2382 if test x$with_newlib = xyes; then
2383 tm_file="${tm_file} newlib-stdint.h"
2385 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2388 tmake_file="sh/t-symbian"
2389 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2390 c_target_objs="symbian-base.o symbian-c.o"
2391 cxx_target_objs="symbian-base.o symbian-cxx.o"
2392 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2395 tm_file="${tm_file} newlib-stdint.h"
2398 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2399 case `echo ${target} | sed 's/e[lb]-/-/'` in
2400 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2401 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2402 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2403 sh4a_single*) sh_cpu_target=sh4a-single ;;
2404 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2405 sh4al) sh_cpu_target=sh4al ;;
2406 sh4a*) sh_cpu_target=sh4a ;;
2407 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2408 sh4_single*) sh_cpu_target=sh4-single ;;
2409 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2410 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2411 sh3e*) sh_cpu_target=sh3e ;;
2412 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2413 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2414 sh2a_single*) sh_cpu_target=sh2a-single ;;
2415 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2416 sh2a*) sh_cpu_target=sh2a ;;
2417 sh2e*) sh_cpu_target=sh2e ;;
2418 sh2*) sh_cpu_target=sh2 ;;
2419 *) sh_cpu_target=sh1 ;;
2421 # did the user say --without-fp ?
2422 if test x$with_fp = xno; then
2423 case ${sh_cpu_target} in
2424 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2426 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2427 sh4*) sh_cpu_target=sh4-nofpu ;;
2428 sh3*) sh_cpu_target=sh3 ;;
2429 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2430 sh2*) sh_cpu_target=sh2 ;;
2431 *) echo --without-fp not available for $target: ignored
2433 tm_defines="$tm_defines STRICT_NOFPU=1"
2435 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2436 case $sh_cpu_default in
2437 sh5-64media-nofpu | sh5-64media | \
2438 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2439 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2440 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2441 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2442 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2443 "") sh_cpu_default=${sh_cpu_target} ;;
2444 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2446 sh_multilibs=${with_multilib_list}
2447 if test "$sh_multilibs" = "default" ; then
2449 sh64-superh-linux* | \
2450 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2451 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2452 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2453 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2454 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2455 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2457 if test x$with_fp = xno; then
2458 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2461 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2462 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2463 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2464 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2465 for sh_multilib in ${sh_multilibs}; do
2466 case ${sh_multilib} in
2467 m1 | m2 | m2e | m3 | m3e | \
2468 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2469 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2470 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2471 m5-64media | m5-64media-nofpu | \
2472 m5-32media | m5-32media-nofpu | \
2473 m5-compact | m5-compact-nofpu)
2474 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2475 # It is passed to MULTIILIB_OPTIONS verbatim.
2476 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2477 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2479 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2480 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2481 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2483 echo "with_multilib_list=${sh_multilib} not supported."
2488 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2489 if test x${enable_incomplete_targets} = xyes ; then
2490 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2492 tm_file="$tm_file ./sysroot-suffix.h"
2493 tmake_file="$tmake_file t-sysroot-suffix"
2496 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2497 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2500 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2501 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2504 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
2507 tmake_file="sparc/t-leon"
2510 tmake_file="sparc/t-leon3"
2513 tmake_file="sparc/t-elf"
2516 tmake_file="${tmake_file} sparc/t-crtfm"
2517 extra_parts="crtbegin.o crtend.o"
2520 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2521 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2522 extra_parts="crtbegin.o crtend.o"
2525 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h"
2526 extra_options="${extra_options} sparc/long-double-switch.opt"
2529 tmake_file="${tmake_file} sparc/t-leon"
2532 tmake_file="${tmake_file} sparc/t-leon3"
2535 tmake_file="${tmake_file} sparc/t-linux"
2538 if test x$enable_targets = xall; then
2539 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2540 tmake_file="${tmake_file} sparc/t-linux64"
2542 tm_file="${tm_file} sparc/linux.h"
2544 tmake_file="${tmake_file} sparc/t-crtfm"
2547 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2548 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2549 extra_options="${extra_options} sparc/long-double-switch.opt"
2552 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sol2.h"
2554 *-*-solaris2.1[0-9]*)
2555 tm_file="${tm_file} sol2-10.h"
2559 use_gcc_stdint=provide
2562 tm_file="${tm_file} sparc/sol2.h"
2564 sparc64-*-* | sparcv9-*-*)
2565 tm_file="${tm_file} sparc/sol2-64.h"
2568 test x$with_cpu != x || with_cpu=v9
2571 tm_file="${tm_file} sparc/sol2-bi.h"
2572 if test x$gas = xyes; then
2573 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2575 if test x$gnu_ld = xyes; then
2576 tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
2578 tm_file="${tm_file} tm-dwarf2.h"
2579 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2580 if test x$gnu_ld = xyes; then
2581 tmake_file="$tmake_file t-slibgcc-elf-ver"
2583 tmake_file="$tmake_file t-slibgcc-sld"
2585 if test x$gas = xyes; then
2586 tm_file="usegas.h ${tm_file}"
2588 c_target_objs="sol2-c.o"
2589 cxx_target_objs="sol2-c.o"
2591 tm_p_file="${tm_p_file} sol2-protos.h"
2592 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2593 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2594 "":yes:* | yes:yes:* )
2597 "":*:yes | yes:*:yes )
2603 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2604 tmake_file="${tmake_file} sparc/t-vxworks"
2607 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2608 extra_options="${extra_options} sparc/little-endian.opt"
2609 tmake_file="${tmake_file} sparc/t-crtfm"
2610 extra_parts="crtbegin.o crtend.o"
2613 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2614 extra_options="${extra_options} sparc/little-endian.opt"
2615 tmake_file="${tmake_file} sparc/t-crtfm t-rtems"
2616 extra_parts="crtbegin.o crtend.o"
2619 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/linux64.h"
2620 extra_options="${extra_options} sparc/long-double-switch.opt"
2621 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2623 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2624 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2625 extra_options="${extra_options} sparc/long-double-switch.opt"
2626 tmake_file="${tmake_file} sparc/t-crtfm"
2627 case "x$with_cpu" in
2629 x) with_cpu=ultrasparc ;;
2630 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2634 tm_file="sparc/biarch64.h ${tm_file}"
2635 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2636 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2637 extra_options="${extra_options} sparc/long-double-switch.opt"
2638 tmake_file="${tmake_file} sparc/t-netbsd64"
2641 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
2642 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2643 extra_options="${extra_options} openbsd.opt"
2644 extra_options="${extra_options} sparc/little-endian.opt"
2649 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2650 tmake_file="spu/t-spu-elf"
2651 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2652 extra_modes=spu/spu-modes.def
2653 c_target_objs="${c_target_objs} spu-c.o"
2654 cxx_target_objs="${cxx_target_objs} spu-c.o"
2657 target_cpu_default="TARGET_CPU_v850e1"
2658 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2659 tm_p_file=v850/v850-protos.h
2660 tmake_file=v850/t-v850e
2661 md_file=v850/v850.md
2662 extra_modes=v850/v850-modes.def
2663 out_file=v850/v850.c
2664 extra_options="${extra_options} v850/v850.opt"
2665 if test x$stabs = xyes
2667 tm_file="${tm_file} dbx.h"
2670 c_target_objs="v850-c.o"
2671 cxx_target_objs="v850-c.o"
2675 target_cpu_default="TARGET_CPU_v850e"
2676 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2677 tm_p_file=v850/v850-protos.h
2678 tmake_file=v850/t-v850e
2679 md_file=v850/v850.md
2680 extra_modes=v850/v850-modes.def
2681 out_file=v850/v850.c
2682 extra_options="${extra_options} v850/v850.opt"
2683 if test x$stabs = xyes
2685 tm_file="${tm_file} dbx.h"
2688 c_target_objs="v850-c.o"
2689 cxx_target_objs="v850-c.o"
2693 target_cpu_default="TARGET_CPU_generic"
2694 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2695 tmake_file=v850/t-v850
2696 if test x$stabs = xyes
2698 tm_file="${tm_file} dbx.h"
2701 c_target_objs="v850-c.o"
2702 cxx_target_objs="v850-c.o"
2706 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
2707 extra_options="${extra_options} vax/elf.opt"
2708 tmake_file="${tmake_file} vax/t-linux"
2711 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2712 extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
2715 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2716 extra_options="${extra_options} netbsd.opt"
2722 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2723 extra_options="${extra_options} openbsd.opt"
2727 # For historical reasons, the target files omit the 'x'.
2728 tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
2729 tm_p_file=stormy16/stormy16-protos.h
2730 md_file=stormy16/stormy16.md
2731 out_file=stormy16/stormy16.c
2732 extra_options=stormy16/stormy16.opt
2733 tmake_file="stormy16/t-stormy16"
2734 extra_parts="crtbegin.o crtend.o"
2737 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
2738 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2741 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
2742 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2745 tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
2746 tmake_file="${tmake_file} mn10300/t-linux"
2748 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2752 tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2753 tmake_file="${tmake_file} t-rtems"
2754 c_target_objs="m32c-pragma.o"
2755 cxx_target_objs="m32c-pragma.o"
2758 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2759 c_target_objs="m32c-pragma.o"
2760 cxx_target_objs="m32c-pragma.o"
2763 echo "*** Configuration ${target} not supported" 1>&2
2769 i[34567]86-*-linux* | x86_64-*-linux*)
2770 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2772 i[34567]86-*-* | x86_64-*-*)
2773 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2775 powerpc*-*-* | rs6000-*-*)
2776 tm_file="${tm_file} rs6000/option-defaults.h"
2779 # Support for --with-cpu and related options (and a few unrelated options,
2783 echo "--with-cpu must be passed a value" 1>&2
2788 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2789 # to generic if there is no processor scheduler model for the target.
2792 arch_without_sse2=no
2793 arch_without_64bit=no
2798 arch_without_sse2=yes
2799 arch_without_64bit=yes
2804 arch_without_sse2=yes
2805 arch_without_64bit=yes
2808 arch_without_sse2=yes
2809 arch_without_64bit=yes
2810 case ${target_noncanonical} in
2823 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2833 i686-*-* | i786-*-*)
2834 case ${target_noncanonical} in
2843 amdfam10-*|barcelona-*)
2847 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2851 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2855 athlon_xp-*|athlon_mp-*|athlon_4-*)
2858 arch_without_sse2=yes
2859 arch_without_64bit=yes
2861 athlon_tbird-*|athlon-*)
2864 arch_without_sse2=yes
2869 arch_without_sse2=yes
2874 arch_without_sse2=yes
2876 pentium3-*|pentium3m-*)
2879 arch_without_sse2=yes
2881 pentium4-*|pentium4m-*)
2916 arch_without_sse2=yes
2921 arch_without_sse2=yes
2922 arch_without_64bit=yes
2927 case ${target_noncanonical} in
2936 amdfam10-*|barcelona-*)
2940 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2944 k8-*|opteron-*|athlon_64-*)
2972 # If there is no $with_cpu option, try to infer one from ${target}.
2973 # This block sets nothing except for with_cpu.
2974 if test x$with_cpu = x ; then
2976 i[34567]86-*-*|x86_64-*-*)
2994 frv-*-*linux* | frv400-*-*linux*)
3001 case "$with_arch" in
3003 with_cpu=${default_cf_cpu}
3006 with_cpu=m${default_m68k_cpu}
3017 with_cpu="`echo ${target} | sed 's/-.*$//'`"
3021 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
3023 i[34567]86-*-*|x86_64-*-*)
3024 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
3025 if test x$with_cpu_32 = x; then
3026 with_cpu_32=$with_cpu
3028 if test x$with_cpu_64 = x; then
3029 with_cpu_64=$with_cpu
3037 # Support for --with-arch and related options (and a few unrelated options,
3039 case ${with_arch} in
3041 echo "--with-arch must be passed a value" 1>&2
3046 # If there is no $with_arch option, try to infer one from ${target}.
3047 # This block sets nothing except for with_arch.
3048 if test x$with_arch = x ; then
3050 i[34567]86-*-darwin*|x86_64-*-darwin*)
3051 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
3052 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
3055 # --with-fpmath sets the default ISA to SSE2, which is the same
3056 # ISA supported by Pentium 4.
3057 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
3068 # Avoid overriding --with-arch-32 and --with-arch-64 values.
3070 i[34567]86-*-darwin*|x86_64-*-darwin*)
3071 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
3072 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
3074 i[34567]86-*-*|x86_64-*-*)
3075 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
3076 if test x$with_arch_32 = x; then
3077 with_arch_32=$with_arch
3079 if test x$with_arch_64 = x; then
3080 if test $arch_without_64bit = yes; then
3081 # Set the default 64bit arch to x86-64 if the default arch
3082 # doesn't support 64bit.
3085 with_arch_64=$with_arch
3089 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
3090 # Set the default 64bit arch to x86-64 if the default arch
3091 # doesn't support 64bit and we need 64bit ISA.
3092 with_arch_32=$with_arch
3100 # Support --with-fpmath.
3101 if test x$with_fpmath != x; then
3103 i[34567]86-*-* | x86_64-*-*)
3104 case ${with_fpmath} in
3106 tm_file="${tm_file} i386/avxmath.h"
3109 tm_file="${tm_file} i386/ssemath.h"
3112 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3118 echo "--with-fpmath isn't supported for $target." 1>&2
3124 # Similarly for --with-schedule.
3125 if test x$with_schedule = x; then
3128 # Override default PA8000 scheduling model.
3129 with_schedule=7100LC
3134 # Validate and mark as valid any --with options supported
3135 # by this target. In order to use a particular --with option
3136 # you must list it in supported_defaults; validating the value
3137 # is optional. This case statement should set nothing besides
3138 # supported_defaults.
3143 supported_defaults="cpu tune"
3144 for which in cpu tune; do
3145 eval "val=\$with_$which"
3148 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3149 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3153 echo "Unknown CPU used in --with-$which=$val" 1>&2
3161 supported_defaults="arch cpu float tune fpu abi mode"
3162 for which in cpu tune; do
3163 # See if it matches any of the entries in arm-cores.def
3164 eval "val=\$with_$which"
3165 if [ x"$val" = x ] \
3166 || grep "^ARM_CORE(\"$val\"," \
3167 ${srcdir}/config/arm/arm-cores.def \
3170 new_val=`grep "^ARM_CORE(\"$val\"," \
3171 ${srcdir}/config/arm/arm-cores.def | \
3172 sed -e 's/^[^,]*,[ ]*//' | \
3174 eval "target_${which}_cname=$new_val"
3175 echo "For $val real value is $new_val"
3178 echo "Unknown CPU used in --with-$which=$val" 1>&2
3183 case "$with_arch" in
3185 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3186 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3187 | armv7 | armv7-a | armv7-r | armv7-m \
3192 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3197 case "$with_float" in
3199 | soft | hard | softfp)
3203 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3210 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
3211 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3212 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3213 | fpv4-sp-d16 | neon-vfpv4)
3217 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3224 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3228 echo "Unknown ABI used in --with-abi=$with_abi"
3233 case "$with_mode" in
3239 echo "Unknown mode used in --with-mode=$with_mode"
3244 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3245 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3250 supported_defaults=cpu
3255 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3261 fido-*-* | m68k*-*-*)
3262 supported_defaults="arch cpu"
3263 case "$with_arch" in
3265 m68k_arch_family="$with_arch"
3268 echo "Invalid --with-arch=$with_arch" 1>&2
3273 # We always have a $with_cpu setting here.
3275 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3276 m68k_cpu_ident=$with_cpu
3279 m68k_cpu_ident=m68020
3280 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3283 m68k_cpu_ident=m68020
3284 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3287 # We need the C identifier rather than the string.
3288 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3289 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3290 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3291 ${srcdir}/config/m68k/m68k-devices.def`
3292 if [ x"$m68k_cpu_ident" = x ] ; then
3293 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3296 with_cpu="mcpu=$with_cpu"
3302 supported_defaults="arch schedule"
3304 case "$with_arch" in
3305 "" | 1.0 | 1.1 | 2.0)
3309 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3314 case "$with_schedule" in
3315 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3319 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3325 i[34567]86-*-* | x86_64-*-*)
3326 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3327 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3328 eval "val=\$with_$which"
3331 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3332 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3333 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3334 | athlon-4 | athlon-xp | athlon-mp | geode \
3335 | prescott | pentium-m | pentium4m | pentium3m)
3342 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3350 "" | x86-64 | generic | native \
3351 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3352 | opteron-sse3 | athlon-fx | bdver1 | btver1 | amdfam10 \
3353 | barcelona | nocona | core2 | corei7 | corei7-avx | atom)
3357 echo "Unknown CPU given in --with-$which=$val." 1>&2
3365 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3367 case ${with_float} in
3372 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3378 "" | 32 | o64 | n32 | 64 | eabi)
3382 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3387 case ${with_divide} in
3388 "" | breaks | traps)
3392 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3397 case ${with_llsc} in
3408 echo "Unknown llsc type used in --with-llsc" 1>&2
3413 case ${with_mips_plt} in
3418 with_mips_plt=no-plt
3423 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3428 case ${with_synci} in
3433 # No is the default.
3437 echo "Unknown synci type used in --with-synci" 1>&2
3443 powerpc*-*-* | rs6000-*-*)
3444 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3446 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3447 eval "val=\$with_$which"
3449 default32 | default64)
3454 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3458 with_which="with_$which"
3462 tm_defines="${tm_defines} CONFIG_PPC405CR"
3463 eval "with_$which=405"
3466 | power | power[234567] | power6x | powerpc | powerpc64 \
3467 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3468 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3469 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3470 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3471 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3472 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3476 echo "Unknown cpu used in --with-$which=$val." 1>&2
3484 supported_defaults="arch mode tune"
3486 for which in arch tune; do
3487 eval "val=\$with_$which"
3489 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3493 echo "Unknown cpu used in --with-$which=$val." 1>&2
3499 case ${with_mode} in
3504 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3510 sh[123456ble]-*-* | sh-*-*)
3511 supported_defaults="cpu"
3512 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3513 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3516 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3518 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3521 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3522 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3523 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3524 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3530 supported_defaults="cpu float tune"
3532 for which in cpu tune; do
3533 eval "val=\$with_$which"
3535 "" | sparc | sparcv9 | sparc64 \
3537 | v8 | supersparc | hypersparc | leon \
3538 | sparclite | f930 | f934 | sparclite86x \
3539 | sparclet | tsc701 \
3540 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3544 echo "Unknown cpu used in --with-$which=$val" 1>&2
3550 case ${with_float} in
3555 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3562 supported_defaults="arch tune"
3564 for which in arch tune; do
3565 eval "val=\$with_$which"
3567 "" | cell | celledp)
3571 echo "Unknown cpu used in --with-$which=$val." 1>&2
3579 supported_defaults=cpu
3581 "" | v850e | v850e1)
3585 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3592 # Set some miscellaneous flags for particular targets.
3593 target_cpu_default2=
3596 if test x$gas = xyes
3598 target_cpu_default2="MASK_GAS"
3603 if test x$target_cpu_cname = x
3605 target_cpu_default2=TARGET_CPU_generic
3607 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3612 target_cpu_default2="MASK_BIG_SWITCH"
3613 if test x$gas = xyes
3615 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3619 fido*-*-* | m68k*-*-*)
3620 target_cpu_default2=$m68k_cpu_ident
3621 if [ x"$m68k_arch_family" != x ]; then
3622 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3626 i[34567]86-*-darwin* | x86_64-*-darwin*)
3627 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3629 i[34567]86-*-linux* | x86_64-*-linux* | \
3630 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3632 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3634 i[34567]86-*-solaris2*)
3635 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3637 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3638 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3640 i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3641 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3644 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3648 if test x$gnu_ld = xyes
3650 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3654 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3657 tmake_file="mips/t-mips $tmake_file"
3660 powerpc*-*-* | rs6000-*-*)
3661 # FIXME: The PowerPC port uses the value set at compile time,
3662 # although it's only cosmetic.
3663 if test "x$with_cpu" != x
3665 target_cpu_default2="\\\"$with_cpu\\\""
3667 out_file=rs6000/rs6000.c
3668 c_target_objs="${c_target_objs} rs6000-c.o"
3669 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3670 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3672 if test x$enable_e500_double = xyes
3674 tm_file="$tm_file rs6000/e500-double.h"
3678 sh[123456ble]*-*-* | sh-*-*)
3679 c_target_objs="${c_target_objs} sh-c.o"
3680 cxx_target_objs="${cxx_target_objs} sh-c.o"
3684 if test x$with_tune = x ; then
3688 # The SPARC port checks this value at compile-time.
3689 target_cpu_default2="TARGET_CPU_$with_cpu"
3693 # Some standard aliases.
3698 xsparcv9 | xsparc64)
3703 # The SPARC port checks this value at compile-time.
3704 target_cpu_default2="TARGET_CPU_$with_cpu"
3708 # FIXME: The v850 is "special" in that it does not support
3709 # runtime CPU selection, only --with-cpu.
3710 case "x$with_cpu" in
3714 target_cpu_default2="TARGET_CPU_$with_cpu"
3721 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3722 for option in $all_defaults
3724 eval "val=\$with_"`echo $option | sed s/-/_/g`
3725 if test -n "$val"; then
3726 case " $supported_defaults " in
3730 echo "This target does not support --with-$option." 2>&1
3731 echo "Valid --with options are: $supported_defaults" 2>&1
3738 t="{ \"$option\", \"$val\" }"
3740 t="${t}, { \"$option\", \"$val\" }"
3747 configure_default_options="{ { NULL, NULL} }"
3749 configure_default_options="{ ${t} }"
3752 if test "$target_cpu_default2" != ""
3754 if test "$target_cpu_default" != ""
3756 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3758 target_cpu_default=$target_cpu_default2