gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 3, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING3.  If not see
  19 #<http://www.gnu.org/licenses/>.
  20
  21 # This is the GCC target-specific configuration file
  22 # where a configuration type is mapped to different system-specific
  23 # definitions and files.  This is invoked by the autoconf-generated
  24 # configure script.  Putting it in a separate shell file lets us skip
  25 # running autoconf when modifying target-specific information.
  26
  27 # When you change the cases in the OS or target switches, consider
  28 # updating ../libgcc/config.host also.
  29
  30 # This file switches on the shell variable ${target}, and also uses the
  31 # following shell variables:
  32 #
  33 #  with_*               Various variables as set by configure.
  34 #
  35 #  enable_threads       Either the name, yes or no depending on whether
  36 #                       threads support was requested.
  37 #
  38 #  default_use_cxa_atexit
  39 #                         The default value for the $enable___cxa_atexit
  40 #                       variable.  enable___cxa_atexit needs to be set to
  41 #                       "yes" for the correct operation of C++ destructors
  42 #                       but it relies upon the presence of a non-standard C
  43 #                       library function called __cxa_atexit.
  44 #                         Since not all C libraries provide __cxa_atexit the
  45 #                       default value of $default_use_cxa_atexit is set to
  46 #                       "no" except for targets which are known to be OK.
  47 #
  48 #  gas_flag             Either yes or no depending on whether GNU as was
  49 #                       requested.
  50 #
  51 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  52 #                       requested.
  53
  54 # This file sets the following shell variables for use by the
  55 # autoconf-generated configure script:
  56 #
  57 #  cpu_type             The name of the cpu, if different from the first
  58 #                       chunk of the canonical target name.
  59 #
  60 #  tm_defines           List of target macros to define for all compilations.
  61 #
  62 #  tm_file              A list of target macro files, if different from
  63 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  64 #                       per target in a way like this:
  65 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  66 #                       Note that the preferred order is:
  67 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  68 #                       - generic headers like dbxelf.h elfos.h, etc.
  69 #                       - specializing target headers like ${cpu_type.h}/elf.h
  70 #                       This helps to keep OS specific stuff out of the CPU
  71 #                       defining header ${cpu_type}/${cpu_type.h}.
  72 #
  73 #  tm_p_file            Location of file with declarations for functions
  74 #                       in $out_file.
  75 #
  76 #  out_file             The name of the machine description C support
  77 #                       file, if different from "$cpu_type/$cpu_type.c".
  78 #
  79 #  md_file              The name of the machine-description file, if
  80 #                       different from "$cpu_type/$cpu_type.md".
  81 #
  82 #  tmake_file           A list of machine-description-specific
  83 #                       makefile-fragments, if different from
  84 #                       "$cpu_type/t-$cpu_type".
  85 #
  86 #  extra_modes          The name of the file containing a list of extra
  87 #                       machine modes, if necessary and different from
  88 #                       "$cpu_type/$cpu_type-modes.def".
  89 #
  90 #  extra_objs           List of extra objects that should be linked into
  91 #                       the compiler proper (cc1, cc1obj, cc1plus)
  92 #                       depending on target.
  93 #
  94 #  extra_gcc_objs       List of extra objects that should be linked into
  95 #                       the compiler driver (gcc) depending on target.
  96 #
  97 #  extra_headers        List of used header files from the directory
  98 #                       config/${cpu_type}.
  99 #
 100 #  use_gcc_tgmath       If set, add tgmath.h to the list of used header
 101 #                       files.
 102 #
 103 #  extra_passes         List of extra executables compiled for this target
 104 #                       machine, used for compiling from source to object.
 105 #
 106 #  extra_parts          List of extra object files that should be compiled
 107 #                       for this target machine.
 108 #
 109 #  extra_programs       Like extra_passes, but these are used when linking.
 110 #
 111 #  extra_options        List of target-dependent .opt files.
 112 #
 113 #  c_target_objs        List of extra target-dependent objects that be
 114 #                       linked into the C compiler only.
 115 #
 116 #  cxx_target_objs      List of extra target-dependent objects that be
 117 #                       linked into the C++ compiler only.
 118 #
 119 #  target_gtfiles       List of extra source files with type information.
 120 #
 121 #  xm_defines           List of macros to define when compiling for the
 122 #                       target machine.
 123 #
 124 #  xm_file              List of files to include when compiling for the
 125 #                       target machine.
 126 #
 127 #  use_collect2         Set to yes or no, depending on whether collect2
 128 #                       will be used.
 129 #
 130 #  target_cpu_default   Set to override the default target model.
 131 #
 132 #  gdb_needs_out_file_path
 133 #                       Set to yes if gdb needs a dir command with
 134 #                       `dirname $out_file`.
 135 #
 136 #  thread_file          Set to control which thread package to use.
 137 #
 138 #  gas                  Set to yes or no depending on whether the target
 139 #                       system normally uses GNU as.
 140 #
 141 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 142 #                       for this target.  This is true iff this target
 143 #                       supports "long" or "wchar_t" wider than 32 bits.
 144 #
 145 #  configure_default_options
 146 #                       Set to an initializer for configure_default_options
 147 #                       in configargs.h, based on --with-cpu et cetera.
 148 #
 149 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 150 #                       "no" if fixproto should never be run.
 151
 152 # The following variables are used in each case-construct to build up the
 153 # outgoing variables:
 154 #
 155 #  gnu_ld               Set to yes or no depending on whether the target
 156 #                       system normally uses GNU ld.
 157
 158 out_file=
 159 tmake_file=
 160 extra_headers=
 161 use_gcc_tgmath=yes
 162 extra_passes=
 163 extra_parts=
 164 extra_programs=
 165 extra_objs=
 166 extra_gcc_objs=
 167 extra_options=
 168 c_target_objs=
 169 cxx_target_objs=
 170 tm_defines=
 171 xm_defines=
 172 # Set this to force installation and use of collect2.
 173 use_collect2=
 174 # Set this to override the default target model.
 175 target_cpu_default=
 176 # Set this if gdb needs a dir command with `dirname $out_file`
 177 gdb_needs_out_file_path=
 178 # Set this to control which thread package will be used.
 179 thread_file=
 180 # Reinitialize these from the flag values every loop pass, since some
 181 # configure entries modify them.
 182 gas="$gas_flag"
 183 gnu_ld="$gnu_ld_flag"
 184 default_use_cxa_atexit=no
 185 target_gtfiles=
 186 need_64bit_hwint=
 187
 188 # Default to not using fixproto.  Targets which need fixproto should
 189 # specifically set this to 'yes'.
 190 use_fixproto=no
 191
 192 # Don't carry these over build->host->target.  Please.
 193 xm_file=
 194 md_file=
 195
 196 # Obsolete configurations.
 197 case ${target} in
 198    c4x-*                \
 199  | tic4x-*              \
 200  )
 201     if test "x$enable_obsolete" != xyes; then
 202       echo "*** Configuration ${target} is obsolete." >&2
 203       echo "*** Specify --enable-obsolete to build it anyway." >&2
 204       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 205       echo "*** unless a maintainer comes forward." >&2
 206       exit 1
 207     fi;;
 208 esac
 209
 210 # Unsupported targets list.  Do not put an entry in this list unless
 211 # it would otherwise be caught by a more permissive pattern.  The list
 212 # should be in alphabetical order.
 213 case ${target} in
 214    alpha*-*-linux*libc1*                \
 215  | i[34567]86-sequent-sysv              \
 216  | i[34567]86-sequent-sysv[123]*        \
 217  | i[34567]86-go32-*                    \
 218  | i[34567]86-*-go32*                   \
 219  | m68k-*-linux*aout*                   \
 220  | m68k-*-linux*libc1*                  \
 221  | mips64orion*-*-rtems*                \
 222  | powerpc-*-linux*libc1*               \
 223  | sparc-*-linux*aout*                  \
 224  | sparc-*-linux*libc1*                 \
 225  | sparc-hal-solaris2*                  \
 226  | thumb-*-*                            \
 227  | *-*-linux*coff*                      \
 228  | *-*-linux*oldld*                     \
 229  | *-*-rtemsaout*                       \
 230  | *-*-rtemscoff*                       \
 231  | vax-*-vms*                           \
 232  )
 233         echo "*** Configuration ${target} not supported" 1>&2
 234         exit 1
 235         ;;
 236 esac
 237
 238 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 239 # updated in each machine entry.  Also set default extra_headers for some
 240 # machines.
 241 tm_p_file=
 242 cpu_type=`echo ${target} | sed 's/-.*$//'`
 243 cpu_is_64bit=
 244 case ${target} in
 245 m32c*-*-*)
 246         cpu_type=m32c
 247         tmake_file=m32c/t-m32c
 248         ;;
 249 alpha*-*-*)
 250         cpu_type=alpha
 251         need_64bit_hwint=yes
 252         ;;
 253 am33_2.0-*-linux*)
 254         cpu_type=mn10300
 255         ;;
 256 strongarm*-*-*)
 257         cpu_type=arm
 258         ;;
 259 arm*-*-*)
 260         cpu_type=arm
 261         extra_headers="mmintrin.h arm_neon.h"
 262         ;;
 263 bfin*-*)
 264         cpu_type=bfin
 265         ;;
 266 ep9312*-*-*)
 267         cpu_type=arm
 268         ;;
 269 frv*)   cpu_type=frv
 270         ;;
 271 fido-*-*)
 272         cpu_type=m68k
 273         extra_headers=math-68881.h
 274         ;;
 275 xscale-*-*)
 276         cpu_type=arm
 277         extra_headers="mmintrin.h"
 278         ;;
 279 i[34567]86-*-*)
 280         cpu_type=i386
 281         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 282                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 283                        nmmintrin.h"
 284         ;;
 285 x86_64-*-*)
 286         cpu_type=i386
 287         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 288                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 289                        nmmintrin.h"
 290         need_64bit_hwint=yes
 291         ;;
 292 ia64-*-*)
 293         extra_headers=ia64intrin.h
 294         need_64bit_hwint=yes
 295         ;;
 296 hppa*-*-* | parisc*-*-*)
 297         cpu_type=pa
 298         ;;
 299 m32r*-*-*)
 300         cpu_type=m32r
 301         ;;
 302 m680[012]0-*-*)
 303         cpu_type=m68k
 304         extra_headers=math-68881.h
 305         ;;
 306 m68k-*-*)
 307         extra_headers=math-68881.h
 308         ;;
 309 mips*-*-*)
 310         cpu_type=mips
 311         need_64bit_hwint=yes
 312         ;;
 313 powerpc*-*-*)
 314         cpu_type=rs6000
 315         extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h"
 316         need_64bit_hwint=yes
 317         case x$with_cpu in
 318             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
 319                 cpu_is_64bit=yes
 320                 ;;
 321         esac
 322         ;;
 323 rs6000*-*-*)
 324         need_64bit_hwint=yes
 325         ;;
 326 score*-*-*)
 327         cpu_type=score
 328         ;;
 329 sparc64*-*-*)
 330         cpu_type=sparc
 331         need_64bit_hwint=yes
 332         ;;
 333 sparc*-*-*)
 334         cpu_type=sparc
 335         ;;
 336 spu*-*-*)
 337         cpu_type=spu
 338         need_64bit_hwint=yes
 339         ;;
 340 s390*-*-*)
 341         cpu_type=s390
 342         need_64bit_hwint=yes
 343         ;;
 344 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 345 sh[123456789lbe]*-*-*)
 346         cpu_type=sh
 347         need_64bit_hwint=yes
 348         ;;
 349 tic4x-*-*)
 350         cpu_type=c4x
 351         ;;
 352 esac
 353
 354 tm_file=${cpu_type}/${cpu_type}.h
 355 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 356 then
 357         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 358 fi
 359 extra_modes=
 360 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 361 then
 362         extra_modes=${cpu_type}/${cpu_type}-modes.def
 363 fi
 364 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 365 then
 366         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 367 fi
 368
 369 case ${target} in
 370 x86_64-*-*)
 371         tm_file="i386/biarch64.h ${tm_file}"
 372         ;;
 373 esac
 374
 375 # On a.out targets, we need to use collect2.
 376 case ${target} in
 377 *-*-*aout*)
 378         use_collect2=yes
 379         ;;
 380 esac
 381
 382 # Common parts for widely ported systems.
 383 case ${target} in
 384 *-*-darwin*)
 385   tm_file="${tm_file} darwin.h"
 386   case ${target} in
 387   *-*-darwin9*)
 388     tm_file="${tm_file} darwin9.h"
 389     ;;
 390   esac
 391   tm_file="${tm_file} ${cpu_type}/darwin.h"
 392   tm_p_file="${tm_p_file} darwin-protos.h"
 393   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 394   target_gtfiles="\$(srcdir)/config/darwin.c"
 395   extra_options="${extra_options} darwin.opt"
 396   c_target_objs="darwin-c.o"
 397   cxx_target_objs="darwin-c.o"
 398   extra_objs="darwin.o"
 399   extra_gcc_objs="darwin-driver.o"
 400   default_use_cxa_atexit=yes
 401   case ${enable_threads} in
 402     "" | yes | posix) thread_file='posix' ;;
 403   esac
 404   ;;
 405 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 406   # This is the place-holder for the generic a.out configuration
 407   # of FreeBSD.  No actual configuration resides here since
 408   # there was only ever a bare-bones ix86 configuration for
 409   # a.out and it exists solely in the machine-specific section.
 410   # This place-holder must exist to avoid dropping into
 411   # the generic ELF configuration of FreeBSD (i.e. it must be
 412   # ordered before that section).
 413   ;;
 414 *-*-freebsd*)
 415   # This is the generic ELF configuration of FreeBSD.  Later
 416   # machine-specific sections may refine and add to this
 417   # configuration.
 418   #
 419   # Due to tm_file entry ordering issues that vary between cpu
 420   # architectures, we only define fbsd_tm_file to allow the
 421   # machine-specific section to dictate the final order of all
 422   # entries of tm_file with the minor exception that components
 423   # of the tm_file set here will always be of the form:
 424   #
 425   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 426   #
 427   # The machine-specific section should not tamper with this
 428   # ordering but may order all other entries of tm_file as it
 429   # pleases around the provided core setting.
 430   gas=yes
 431   gnu_ld=yes
 432   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 433   case ${target} in
 434     *-*-freebsd3 | *-*-freebsd[3].*)
 435       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 436     *-*-freebsd4 | *-*-freebsd[4].*)
 437       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 438     *-*-freebsd5 | *-*-freebsd[5].*)
 439       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 440     *-*-freebsd6 | *-*-freebsd[6].*)
 441       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 442     *-*-freebsd7 | *-*-freebsd[7].*)
 443       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
 444     *-*-freebsd8 | *-*-freebsd[8].*)
 445       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
 446     *-*-freebsd9 | *-*-freebsd[9].*)
 447       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
 448     *)
 449       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 450       exit 1
 451       ;;
 452   esac
 453   tmake_file="t-slibgcc-elf-ver t-freebsd"
 454   case ${enable_threads} in
 455     no)
 456       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 457       ;;
 458     "" | yes | posix)
 459       thread_file='posix'
 460       tmake_file="${tmake_file} t-freebsd-thread"
 461       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 462       # when "optionally" threaded via weak pthread_* checks.
 463       case ${target} in
 464         *-*-freebsd[34] | *-*-freebsd[34].*)
 465           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 466           ;;
 467       esac
 468       ;;
 469     *)
 470       echo 'Unknown thread configuration for FreeBSD'
 471       exit 1
 472       ;;
 473   esac
 474   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 475   ;;
 476 *-*-linux*libc1* | *-*-linux*aout*)
 477   # Avoid the generic linux case.
 478   ;;
 479 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 480   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 481   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 482   extra_options="${extra_options} linux.opt"
 483   gas=yes
 484   gnu_ld=yes
 485   case ${enable_threads} in
 486     "" | yes | posix) thread_file='posix' ;;
 487   esac
 488   tmake_file="t-slibgcc-elf-ver t-linux"
 489   case ${target} in
 490     *-*-*uclibc*)
 491       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 492       ;;
 493     *)
 494       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 495       ;;
 496   esac
 497   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 498   default_use_cxa_atexit=yes
 499   use_gcc_tgmath=no
 500   ;;
 501 *-*-gnu*)
 502   # On the Hurd, the setup is just about the same on
 503   # each different CPU.  The specific machines that we
 504   # support are matched above and just set $cpu_type.
 505   tm_file="${cpu_type}/gnu.h"
 506   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 507   # GNU tools are the only tools.
 508   gas=yes
 509   gnu_ld=yes
 510   # These details are the same as for Linux.
 511   # But here we need a little extra magic.
 512   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 513   case ${target} in
 514     alpha*)
 515       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 516       ;;
 517     i[34567]86-*-*)
 518       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 519       ;;
 520   esac
 521   # Assume that glibc is being used and so __cxa_atexit is provided.
 522   default_use_cxa_atexit=yes
 523   use_gcc_tgmath=no
 524   ;;
 525 *-*-netbsd*)
 526   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 527   gas=yes
 528   gnu_ld=yes
 529
 530   # NetBSD 2.0 and later get POSIX threads enabled by default.
 531   # Allow them to be explicitly enabled on any other version.
 532   case ${enable_threads} in
 533     "")
 534       case ${target} in
 535         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 536           thread_file='posix'
 537           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 538           ;;
 539       esac
 540       ;;
 541     yes | posix)
 542       thread_file='posix'
 543       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 544       ;;
 545   esac
 546
 547   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 548   # ELF configurations.  We will clear extra_parts in the
 549   # a.out configurations.
 550   case ${target} in
 551     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 552       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 553       ;;
 554   esac
 555
 556   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 557   # default (unless overridden by --disable-__cxa_atexit).
 558   case ${target} in
 559     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 560       default_use_cxa_atexit=yes
 561       ;;
 562   esac
 563   ;;
 564 *-*-openbsd*)
 565   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 566   case ${enable_threads} in
 567     yes)
 568       thread_file='posix'
 569       tmake_file="${tmake_file} t-openbsd-thread"
 570       ;;
 571   esac
 572   case ${target} in
 573     *-*-openbsd2.*|*-*-openbsd3.[012])
 574       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 575   esac
 576   ;;
 577 *-*-rtems*)
 578   case ${enable_threads} in
 579     yes) thread_file='rtems' ;;
 580   esac
 581   ;;
 582 *-*-vxworks*)
 583   tmake_file=t-vxworks
 584   xm_defines=POSIX
 585   extra_options="${extra_options} vxworks.opt"
 586   extra_objs=vxworks.o
 587   case ${enable_threads} in
 588     no) ;;
 589     "" | yes | vxworks) thread_file='vxworks' ;;
 590     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 591   esac
 592   ;;
 593 *-*-elf)
 594   # Assume that newlib is being used and so __cxa_atexit is provided.
 595   default_use_cxa_atexit=yes
 596   ;;
 597 esac
 598
 599 case ${target} in
 600 # Support site-specific machine types.
 601 *local*)
 602         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 603         tm_file=${cpu_type}/$rest.h
 604         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 605         then xm_file=${cpu_type}/xm-$rest.h
 606         fi
 607         if test -f $srcdir/config/${cpu_type}/t-$rest
 608         then tmake_file=${cpu_type}/t-$rest
 609         fi
 610         ;;
 611 alpha*-*-unicosmk*)
 612         use_collect2=yes
 613         tm_file="${tm_file} alpha/unicosmk.h"
 614
 615         # Don't include t-ieee for now because we don't support that yet
 616         # tmake_file="alpha/t-ieee"
 617         tmake_file="alpha/t-unicosmk"
 618         use_fixproto=yes
 619         ;;
 620 alpha*-*-linux*)
 621         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 622         target_cpu_default="MASK_GAS"
 623         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 624         ;;
 625 alpha*-*-gnu*)
 626         target_cpu_default="MASK_GAS"
 627         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 628         ;;
 629 alpha*-*-freebsd*)
 630         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 631         target_cpu_default="MASK_GAS"
 632         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 633         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 634         ;;
 635 alpha*-*-netbsd*)
 636         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 637         target_cpu_default="MASK_GAS"
 638         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 639         ;;
 640 alpha*-*-openbsd*)
 641         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 642         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 643         # default x-alpha is only appropriate for dec-osf.
 644         target_cpu_default="MASK_GAS"
 645         tmake_file="alpha/t-alpha alpha/t-ieee"
 646         ;;
 647 alpha*-dec-osf[45]*)
 648         if test x$stabs = xyes
 649         then
 650                 tm_file="${tm_file} dbx.h"
 651         fi
 652         if test x$gas != xyes
 653         then
 654                 extra_passes="mips-tfile mips-tdump"
 655         fi
 656         use_collect2=yes
 657         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 658         tm_file="${tm_file} alpha/osf.h"
 659         extra_headers=va_list.h
 660         case ${target} in
 661           *-*-osf4*)
 662             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 663             case ${target} in
 664                 *-*-osf4.0a) ;;
 665                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 666             esac
 667             ;;
 668           *-*-osf5*)
 669             tm_file="${tm_file} alpha/osf5.h"
 670             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 671             ;;
 672         esac
 673         case ${enable_threads} in
 674           "" | yes | posix)
 675             thread_file='posix'
 676             tmake_file="${tmake_file} alpha/t-osf-pthread"
 677             ;;
 678         esac
 679         ;;
 680 alpha64-dec-*vms*)
 681         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 682         xm_file="alpha/xm-vms.h"
 683         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 684         prefix=/gnu
 685         local_prefix=/gnu
 686         ;;
 687 alpha*-dec-*vms*)
 688         tm_file="${tm_file} alpha/vms.h"
 689         xm_file=alpha/xm-vms.h
 690         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 691         prefix=/gnu
 692         local_prefix=/gnu
 693         ;;
 694 arc-*-elf*)
 695         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 696         extra_parts="crtinit.o crtfini.o"
 697         use_fixproto=yes
 698         ;;
 699 arm-*-coff* | armel-*-coff*)
 700         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 701         tmake_file="arm/t-arm arm/t-arm-coff"
 702         ;;
 703 arm-semi-aof | armel-semi-aof)
 704         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 705         tmake_file="arm/t-arm arm/t-semi"
 706         ;;
 707 arm-wrs-vxworks)
 708         tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
 709         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 710         ;;
 711 arm*-*-freebsd*|strongarm*-*-freebsd*)
 712         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 713         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 714         ;;
 715 arm*-*-netbsdelf*)
 716         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 717         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 718         ;;
 719 arm*-*-netbsd*)
 720         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 721         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 722         extra_parts=""
 723         use_collect2=yes
 724         ;;
 725 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 726         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 727         tmake_file="${tmake_file} t-linux arm/t-arm"
 728         case ${target} in
 729         arm*-*-linux-*eabi)
 730             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 731             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 732             # The BPABI long long divmod functions return a 128-bit value in
 733             # registers r0-r3.  Correctly modeling that requires the use of
 734             # TImode.
 735             need_64bit_hwint=yes
 736             # The EABI requires the use of __cxa_atexit.
 737             default_use_cxa_atexit=yes
 738             ;;
 739         *)
 740             tmake_file="$tmake_file arm/t-linux"
 741             ;;
 742         esac
 743         tm_file="$tm_file arm/aout.h arm/arm.h"
 744         ;;
 745 arm*-*-uclinux*)                # ARM ucLinux
 746         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h arm/uclinux-elf.h"
 747         tmake_file="arm/t-arm arm/t-arm-elf"
 748         case ${target} in
 749         arm*-*-uclinux-*eabi)
 750             tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
 751             tmake_file="$tmake_file arm/t-bpabi"
 752             # The BPABI long long divmod functions return a 128-bit value in
 753             # registers r0-r3.  Correctly modeling that requires the use of
 754             # TImode.
 755             need_64bit_hwint=yes
 756             # The EABI requires the use of __cxa_atexit.
 757             default_use_cxa_atexit=yes
 758         esac
 759         tm_file="$tm_file arm/aout.h arm/arm.h"
 760         ;;
 761 arm*-*-ecos-elf)
 762         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 763         tmake_file="arm/t-arm arm/t-arm-elf"
 764         ;;
 765 arm*-*-eabi* | arm*-*-symbianelf* )
 766         # The BPABI long long divmod functions return a 128-bit value in
 767         # registers r0-r3.  Correctly modeling that requires the use of
 768         # TImode.
 769         need_64bit_hwint=yes
 770         default_use_cxa_atexit=yes
 771         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 772         tmake_file="arm/t-arm arm/t-arm-elf"
 773         case ${target} in
 774         arm*-*-eabi*)
 775           tmake_file="${tmake_file} arm/t-bpabi"
 776           ;;
 777         arm*-*-symbianelf*)
 778           tm_file="${tm_file} arm/symbian.h"
 779           # We do not include t-bpabi for Symbian OS because the system
 780           # provides its own implementation of the BPABI functions.
 781           tmake_file="${tmake_file} arm/t-symbian"
 782           ;;
 783         esac
 784         tm_file="${tm_file} arm/aout.h arm/arm.h"
 785         ;;
 786 arm*-*-rtems*)
 787         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 788         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 789         ;;
 790 arm*-*-elf | ep9312-*-elf)
 791         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 792         tmake_file="arm/t-arm arm/t-arm-elf"
 793         ;;
 794 arm*-wince-pe*)
 795         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 796         tmake_file="arm/t-arm arm/t-wince-pe"
 797         extra_options="${extra_options} arm/pe.opt"
 798         extra_objs="pe.o"
 799         ;;
 800 arm-*-pe*)
 801         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 802         tmake_file="arm/t-arm arm/t-pe"
 803         extra_options="${extra_options} arm/pe.opt"
 804         extra_objs="pe.o"
 805         ;;
 806 arm*-*-kaos*)
 807         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 808         tmake_file="arm/t-arm arm/t-arm-elf"
 809         ;;
 810 avr-*-rtems*)
 811         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 812         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 813         ;;
 814 avr-*-*)
 815         tm_file="avr/avr.h dbxelf.h"
 816         use_fixproto=yes
 817         ;;
 818 bfin*-elf*)
 819         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 820         tmake_file=bfin/t-bfin-elf
 821         use_collect2=no
 822         ;;
 823 bfin*-uclinux*)
 824         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
 825         tmake_file=bfin/t-bfin-uclinux
 826         use_collect2=no
 827         ;;
 828 bfin*-linux-uclibc*)
 829         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h"
 830         tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
 831         use_collect2=no
 832         ;;
 833 bfin*-rtems*)
 834         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
 835         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
 836         ;;
 837 bfin*-*)
 838         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 839         tmake_file=bfin/t-bfin
 840         use_collect2=no
 841         ;;
 842 c4x-*-rtems* | tic4x-*-rtems*)
 843         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
 844         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 845         c_target_objs="c4x-c.o"
 846         cxx_target_objs="c4x-c.o"
 847         ;;
 848 c4x-* | tic4x-*)
 849         tmake_file=c4x/t-c4x
 850         c_target_objs="c4x-c.o"
 851         cxx_target_objs="c4x-c.o"
 852         ;;
 853 cris-*-aout)
 854         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 855         gas=yes
 856         tmake_file="cris/t-cris cris/t-aout"
 857         extra_options="${extra_options} cris/aout.opt"
 858         ;;
 859 cris-*-elf | cris-*-none)
 860         tm_file="dbxelf.h elfos.h ${tm_file}"
 861         tmake_file="cris/t-cris cris/t-elfmulti"
 862         gas=yes
 863         extra_options="${extra_options} cris/elf.opt"
 864         ;;
 865 cris-*-linux*)
 866         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 867         # We need to avoid using t-linux, so override default tmake_file
 868         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 869         extra_options="${extra_options} cris/linux.opt"
 870         ;;
 871 crx-*-elf)
 872         tm_file="elfos.h ${tm_file}"
 873         extra_parts="crtbegin.o crtend.o"
 874         use_collect2=no
 875         ;;
 876 fr30-*-elf)
 877         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 878         tmake_file=fr30/t-fr30
 879         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 880         use_fixproto=yes
 881         ;;
 882 frv-*-elf)
 883         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 884         tmake_file=frv/t-frv
 885         use_fixproto=yes
 886         ;;
 887 frv-*-*linux*)
 888         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 889                  linux.h frv/linux.h frv/frv-abi.h"
 890         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 891         ;;
 892 h8300-*-rtemscoff*)
 893         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
 894         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 895         ;;
 896 h8300-*-rtems*)
 897         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 898         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 899         ;;
 900 h8300-*-elf*)
 901         tmake_file="h8300/t-h8300 h8300/t-elf"
 902         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 903         use_fixproto=yes
 904         ;;
 905 h8300-*-*)
 906         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 907         use_fixproto=yes
 908         ;;
 909 hppa*64*-*-linux* | parisc*64*-*-linux*)
 910         target_cpu_default="MASK_PA_11|MASK_PA_20"
 911         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 912                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 913         tmake_file="${tmake_file} pa/t-linux64"
 914         gas=yes gnu_ld=yes
 915         need_64bit_hwint=yes
 916         ;;
 917 hppa*-*-linux* | parisc*-*-linux*)
 918         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 919         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 920                  pa/pa32-regs.h pa/pa32-linux.h"
 921         tmake_file="${tmake_file} pa/t-linux"
 922         # Set the libgcc version number
 923         if test x$sjlj = x1; then
 924             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 925         else
 926             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 927         fi
 928         ;;
 929 # port not yet contributed.
 930 #hppa*-*-openbsd*)
 931 #       target_cpu_default="MASK_PA_11"
 932 #       ;;
 933 hppa1.1-*-pro*)
 934         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 935         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 936                  pa/pa-pro-end.h libgloss.h"
 937         tmake_file="pa/t-pro"
 938         ;;
 939 hppa1.1-*-osf*)
 940         target_cpu_default="MASK_PA_11"
 941         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 942         tmake_file="pa/t-pa"
 943         use_collect2=yes
 944         ;;
 945 hppa1.1-*-bsd*)
 946         target_cpu_default="MASK_PA_11"
 947         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 948         tmake_file="pa/t-pa"
 949         use_collect2=yes
 950         ;;
 951 hppa[12]*-*-hpux10*)
 952         case ${target} in
 953         hppa1.1-*-* | hppa2*-*-*)
 954                 target_cpu_default="MASK_PA_11"
 955                 ;;
 956         esac
 957         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 958                  pa/pa-hpux.h pa/pa-hpux10.h"
 959         extra_options="${extra_options} pa/pa-hpux.opt"
 960         case ${target} in
 961         *-*-hpux10.[1-9]*)
 962                 tm_file="${tm_file} pa/pa-hpux1010.h"
 963                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 964                 ;;
 965         esac
 966         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 967         case ${enable_threads} in
 968           "")
 969             if test x$have_pthread_h = xyes ; then
 970               tmake_file="${tmake_file} pa/t-dce-thr"
 971             fi
 972             ;;
 973           yes | dce)
 974             tmake_file="${tmake_file} pa/t-dce-thr"
 975             ;;
 976         esac
 977         # Set the libgcc version number
 978         if test x$sjlj = x1; then
 979             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 980         else
 981             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 982         fi
 983         use_collect2=yes
 984         use_fixproto=yes
 985         gas=yes
 986         ;;
 987 hppa*64*-*-hpux11*)
 988         target_cpu_default="MASK_PA_11|MASK_PA_20"
 989         if test x$gnu_ld = xyes
 990         then
 991                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 992         fi
 993         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 994                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 995                  pa/pa-hpux11.h"
 996         case ${target} in
 997         *-*-hpux11.[1-9]*)
 998                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 999                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1000                 ;;
1001         *)
1002                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1003                 ;;
1004         esac
1005         extra_options="${extra_options} pa/pa-hpux.opt \
1006                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1007         need_64bit_hwint=yes
1008         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1009         # Set the libgcc version number
1010         if test x$sjlj = x1; then
1011             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1012         else
1013             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1014         fi
1015         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1016                      libgcc_stub.a"
1017         case x${enable_threads} in
1018         x | xyes | xposix )
1019                 thread_file=posix
1020                 ;;
1021         esac
1022         gas=yes
1023         ;;
1024 hppa[12]*-*-hpux11*)
1025         case ${target} in
1026         hppa1.1-*-* | hppa2*-*-*)
1027                 target_cpu_default="MASK_PA_11"
1028                 ;;
1029         esac
1030         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1031                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1032         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1033         case ${target} in
1034         *-*-hpux11.[1-9]*)
1035                 tm_file="${tm_file} pa/pa-hpux1111.h"
1036                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1037                 ;;
1038         esac
1039         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1040         # Set the libgcc version number
1041         if test x$sjlj = x1; then
1042             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1043         else
1044             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1045         fi
1046         case x${enable_threads} in
1047         x | xyes | xposix )
1048                 thread_file=posix
1049                 ;;
1050         esac
1051         use_collect2=yes
1052         gas=yes
1053         ;;
1054 i[34567]86-*-darwin*)
1055         need_64bit_hwint=yes
1056
1057         # This is so that '.../configure && make' doesn't fail due to
1058         # config.guess deciding that the configuration is i386-*-darwin* and
1059         # then this file using that to set --with-cpu=i386 which has no -m64
1060         # support.
1061         with_cpu=${with_cpu:-generic}
1062         tmake_file="${tmake_file} i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
1063         ;;
1064 x86_64-*-darwin*)
1065         with_cpu=${with_cpu:-generic}
1066         tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
1067         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1068         ;;
1069 i[34567]86-*-elf*)
1070         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1071         tmake_file="i386/t-i386elf t-svr4"
1072         use_fixproto=yes
1073         ;;
1074 x86_64-*-elf*)
1075         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/x86-64.h"
1076         tmake_file="i386/t-i386elf t-svr4"
1077         use_fixproto=yes
1078         ;;
1079 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1080         if test x$gas = xyes
1081         then
1082                 tm_file="${tm_file} usegas.h"
1083         fi
1084         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1085         tmake_file=t-svr4
1086         extra_parts="crtbegin.o crtend.o"
1087         use_fixproto=yes
1088         ;;
1089 i[34567]86-*-aout*)
1090         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1091         use_fixproto=yes
1092         ;;
1093 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1094         tmake_file='i386/t-beos i386/t-crtpic'
1095         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1096         extra_parts='crtbegin.o crtend.o'
1097         ;;
1098 i[34567]86-*-freebsd*)
1099         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1100         ;;
1101 x86_64-*-freebsd*)
1102         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1103         tmake_file="${tmake_file} i386/t-crtstuff"
1104         ;;
1105 i[34567]86-*-netbsdelf*)
1106         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1107         ;;
1108 i[34567]86-*-netbsd*)
1109         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1110         tmake_file=t-netbsd
1111         extra_parts=""
1112         use_collect2=yes
1113         ;;
1114 x86_64-*-netbsd*)
1115         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1116         tmake_file="${tmake_file} i386/t-crtstuff"
1117         ;;
1118 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1119         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1120         # needed to unconfuse gdb
1121         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1122         # we need collect2 until our bug is fixed...
1123         use_collect2=yes
1124         ;;
1125 i[34567]86-*-openbsd*)
1126         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1127         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1128         gas=yes
1129         gnu_ld=yes
1130         ;;
1131 i[34567]86-*-coff*)
1132         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1133         use_fixproto=yes
1134         ;;
1135 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1136                         # Intel 80386's running GNU/*
1137                         # with ELF format using glibc 2
1138         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1139         case ${target} in
1140         i[34567]86-*-linux*)
1141                 if test x$enable_targets = xall; then
1142                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1143                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1144                         tmake_file="${tmake_file} i386/t-linux64 i386/t-fprules-softfp64 soft-fp/t-softfp"
1145                         need_64bit_hwint=yes
1146                         # FIXME: -m64 for i[34567]86-*-* should be allowed just
1147                         # like -m32 for x86_64-*-*.
1148                         case X"${with_cpu}" in
1149                         Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1150                                 ;;
1151                         X)
1152                                 with_cpu=generic
1153                                 ;;
1154                         *)
1155                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1156                                 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1157                                 exit 1
1158                                 ;;
1159                         esac
1160                 else
1161                         tm_file="${tm_file} i386/linux.h"
1162                 fi
1163                 ;;
1164         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1165         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1166         esac
1167         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1168         ;;
1169 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1170         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1171                  i386/x86-64.h i386/linux64.h"
1172         case ${target} in
1173         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1174         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1175         esac
1176         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm i386/t-fprules-softfp64 soft-fp/t-softfp t-dfprules"
1177         ;;
1178 i[34567]86-*-gnu*)
1179         ;;
1180 i[34567]86-pc-msdosdjgpp*)
1181         xm_file=i386/xm-djgpp.h
1182         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1183         tmake_file=i386/t-djgpp
1184         extra_options="${extra_options} i386/djgpp.opt"
1185         gnu_ld=yes
1186         gas=yes
1187         ;;
1188 i[34567]86-*-lynxos*)
1189         xm_defines=POSIX
1190         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1191         tmake_file="i386/t-crtstuff t-lynx"
1192         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1193         extra_options="${extra_options} lynx.opt"
1194         thread_file=lynx
1195         gnu_ld=yes
1196         gas=yes
1197         ;;
1198 i[3456x]86-*-netware*)
1199         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1200         tmake_file=i386/t-netware
1201         extra_objs=netware.o
1202         case /${with_ld} in
1203         */nwld)
1204                 extra_objs="$extra_objs nwld.o"
1205                 tm_file="${tm_file} i386/nwld.h"
1206                 tmake_file="${tmake_file} i386/t-nwld"
1207                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1208                 ;;
1209         esac
1210         case x${enable_threads} in
1211         x | xyes | xposix) thread_file='posix';;
1212         xnks) thread_file='nks';;
1213         xno) ;;
1214         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1215         esac
1216         ;;
1217 i[34567]86-*-nto-qnx*)
1218         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1219         tmake_file=i386/t-nto
1220         gnu_ld=yes
1221         gas=yes
1222         ;;
1223 i[34567]86-*-rtems*)
1224         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1225         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1226         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1227         ;;
1228 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1229         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1230         if test x$gas = xyes
1231         then
1232                 tm_file="usegas.h ${tm_file}"
1233         fi
1234         tmake_file=i386/t-sco5
1235         extra_parts="crtbegin.o crtend.o"
1236         extra_options="${extra_options} i386/sco5.opt"
1237         use_fixproto=yes
1238         ;;
1239 i[34567]86-*-solaris2*)
1240         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1241         case ${target} in
1242         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1243                 tm_file="${tm_file} sol2-6.h"
1244                 ;;
1245         *-*-solaris2.1[0-9]*)
1246                 tm_file="${tm_file} sol2-10.h"
1247                 ;;
1248         esac
1249         tm_file="${tm_file} i386/sol2.h"
1250         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1251         c_target_objs="sol2-c.o"
1252         cxx_target_objs="sol2-c.o"
1253         extra_objs="sol2.o"
1254         tm_p_file="${tm_p_file} sol2-protos.h"
1255         if test x$gnu_ld = xyes; then
1256                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1257                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1258         else
1259                 tmake_file="$tmake_file t-slibgcc-sld"
1260         fi
1261         if test x$gas = xyes; then
1262                 tm_file="usegas.h ${tm_file}"
1263         fi
1264         case ${target} in
1265         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1266                 tm_file="$tm_file tm-dwarf2.h"
1267                 ;;
1268         esac
1269         case ${target} in
1270         *-*-solaris2.1[0-9]*)
1271                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1272                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1273                 tmake_file="$tmake_file i386/t-crtstuff i386/t-sol2-10"
1274                 need_64bit_hwint=yes
1275                 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1276                 # like -m32 for x86_64-*-*.
1277                 case X"${with_cpu}" in
1278                 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1279                         ;;
1280                 X)
1281                         with_cpu=generic
1282                         ;;
1283                 *)
1284                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1285                         echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1286                         exit 1
1287                         ;;
1288                 esac
1289                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1290                 # part of the base system.
1291                 extra_parts="gmon.o crtbegin.o crtend.o"
1292                 ;;
1293         *)
1294                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1295                 ;;
1296         esac
1297         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1298           "":yes:* | yes:yes:* )
1299                 case ${target} in
1300                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1301                         thread_file=posix95
1302                         ;;
1303                   *)
1304                         thread_file=posix
1305                         ;;
1306                 esac
1307                 ;;
1308           "":*:yes | yes:*:yes )
1309                 thread_file=solaris
1310                 ;;
1311         esac
1312         ;;
1313 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1314        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1315        if test x$stabs = xyes
1316        then
1317                tm_file="${tm_file} dbx.h"
1318        fi
1319        tmake_file="i386/t-crtpic t-svr4"
1320        extra_parts="crtbegin.o crtend.o"
1321        if test x$enable_threads = xyes; then
1322                thread_file='posix'
1323        fi
1324         use_fixproto=yes
1325        ;;
1326 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1327         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1328         if test x$stabs = xyes
1329         then
1330                 tm_file="${tm_file} dbx.h"
1331         fi
1332         tmake_file="i386/t-crtpic t-svr4"
1333         extra_parts="crtbegin.o crtend.o"
1334         use_fixproto=yes
1335         ;;
1336 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1337         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1338         case ${target} in
1339           *-vxworksae*)
1340             tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1341             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1342             ;;
1343           *)
1344             tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1345             tmake_file="${tmake_file} i386/t-vxworks"
1346             ;;
1347         esac
1348         ;;
1349 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1350         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1351         xm_file=i386/xm-cygwin.h
1352         tmake_file="i386/t-cygwin i386/t-cygming"
1353         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1354         extra_options="${extra_options} i386/cygming.opt"
1355         extra_objs="winnt.o winnt-stubs.o"
1356         c_target_objs=cygwin2.o
1357         cxx_target_objs="cygwin2.o winnt-cxx.o"
1358         extra_gcc_objs=cygwin1.o
1359         if test x$enable_threads = xyes; then
1360                 thread_file='posix'
1361         fi
1362         ;;
1363 i[34567]86-*-mingw32* | x86_64-*-mingw32*)
1364         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1365         xm_file=i386/xm-mingw32.h
1366         tmake_file="i386/t-cygming i386/t-mingw32"
1367         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1368         extra_options="${extra_options} i386/cygming.opt"
1369         extra_objs="winnt.o winnt-stubs.o"
1370         cxx_target_objs=winnt-cxx.o
1371         default_use_cxa_atexit=yes
1372         case ${enable_threads} in
1373           "" | yes | win32)
1374           thread_file='win32'
1375           tmake_file="${tmake_file} i386/t-gthr-win32"
1376           ;;
1377         esac
1378         case ${target} in
1379                 *mingw32crt*)
1380                         tm_file="${tm_file} i386/crtdll.h"
1381                         ;;
1382                 *mingw32msv* | *mingw32*)
1383                         ;;
1384         esac
1385         ;;
1386 i[34567]86-*-uwin*)
1387         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1388         tmake_file="i386/t-cygwin i386/t-uwin"
1389         extra_objs=winnt.o
1390         extra_options="${extra_options} i386/cygming.opt"
1391         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1392         if test x$enable_threads = xyes; then
1393                 thread_file='win32'
1394         fi
1395         use_fixproto=yes
1396         ;;
1397 i[34567]86-*-interix3*)
1398         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1399         tmake_file="i386/t-interix"
1400         extra_objs=winnt.o
1401         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1402         if test x$enable_threads = xyes ; then
1403                 thread_file='posix'
1404         fi
1405         if test x$stabs = xyes ; then
1406                 tm_file="${tm_file} dbxcoff.h"
1407         fi
1408         ;;
1409 i[34567]86-*-kaos*)
1410         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1411         tmake_file="i386/t-i386elf t-svr4"
1412         ;;
1413 ia64*-*-elf*)
1414         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1415         tmake_file="ia64/t-ia64"
1416         target_cpu_default="0"
1417         if test x$gas = xyes
1418         then
1419                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1420         fi
1421         if test x$gnu_ld = xyes
1422         then
1423                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1424         fi
1425         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1426         use_fixproto=yes
1427         ;;
1428 ia64*-*-freebsd*)
1429         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1430         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1431         tmake_file="${tmake_file} ia64/t-ia64"
1432         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1433         ;;
1434 ia64*-*-linux*)
1435         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1436         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1437         if test x$with_system_libunwind != xyes ; then
1438                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1439         fi
1440         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1441         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1442         ;;
1443 ia64*-*-hpux*)
1444         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1445         tmake_file="ia64/t-ia64 ia64/t-hpux"
1446         target_cpu_default="MASK_GNU_AS"
1447         case x$enable_threads in
1448         x | xyes | xposix )
1449                 thread_file=posix
1450                 ;;
1451         esac
1452         use_collect2=no
1453         c_target_objs="ia64-c.o"
1454         cxx_target_objs="ia64-c.o"
1455         extra_options="${extra_options} ia64/ilp32.opt"
1456         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1457         # in ia64/t-hpux, and also fix the definition of putenv in
1458         # sys-protos.h (const char not char).
1459         ;;
1460 iq2000*-*-elf*)
1461         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1462         tmake_file=iq2000/t-iq2000
1463         out_file=iq2000/iq2000.c
1464         md_file=iq2000/iq2000.md
1465         use_fixproto=yes
1466         ;;
1467 m32r-*-elf*)
1468         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1469         extra_parts="crtinit.o crtfini.o"
1470         use_fixproto=yes
1471         ;;
1472 m32rle-*-elf*)
1473         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1474         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1475         use_fixproto=yes
1476         ;;
1477 m32r-*-linux*)
1478         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1479         # We override the tmake_file for linux -- why?
1480         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1481         gnu_ld=yes
1482         use_fixproto=yes
1483         if test x$enable_threads = xyes; then
1484                 thread_file='posix'
1485         fi
1486         ;;
1487 m32rle-*-linux*)
1488         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1489         # We override the tmake_file for linux -- why?
1490         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1491         gnu_ld=yes
1492         use_fixproto=yes
1493         if test x$enable_threads = xyes; then
1494                 thread_file='posix'
1495         fi
1496         ;;
1497 # m68hc11 and m68hc12 share the same machine description.
1498 m68hc11-*-*|m6811-*-*)
1499         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1500         tm_p_file="m68hc11/m68hc11-protos.h"
1501         md_file="m68hc11/m68hc11.md"
1502         out_file="m68hc11/m68hc11.c"
1503         tmake_file="m68hc11/t-m68hc11-gas"
1504         use_fixproto=yes
1505         ;;
1506 m68hc12-*-*|m6812-*-*)
1507         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1508         tm_p_file="m68hc11/m68hc11-protos.h"
1509         md_file="m68hc11/m68hc11.md"
1510         out_file="m68hc11/m68hc11.c"
1511         tmake_file="m68hc11/t-m68hc11-gas"
1512         extra_options="${extra_options} m68hc11/m68hc11.opt"
1513         use_fixproto=yes
1514         ;;
1515 m68k-*-aout*)
1516         default_m68k_cpu=68020
1517         default_cf_cpu=5206
1518         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1519         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1520         ;;
1521 m68k-*-coff*)
1522         default_m68k_cpu=68020
1523         default_cf_cpu=5206
1524         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1525         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1526         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1527         use_fixproto=yes
1528         ;;
1529 m68020-*-elf* | m68k-*-elf* | fido-*-elf*)
1530         case ${target} in
1531         fido-*-elf*)
1532                 # Check that $with_cpu makes sense.
1533                 case $with_cpu in
1534                 "" | "fidoa")
1535                         ;;
1536                 *)
1537                         echo "Cannot accept --with-cpu=$with_cpu"
1538                         exit 1
1539                         ;;
1540                 esac
1541                 with_cpu=fidoa
1542                 ;;
1543         *)
1544                 default_m68k_cpu=68020
1545                 default_cf_cpu=5206
1546                 ;;
1547         esac
1548         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1549         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1550         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1551         # Add multilibs for targets other than fido.
1552         case ${target} in
1553         fido-*-elf*)
1554                 ;;
1555         *)
1556                 tmake_file="$tmake_file m68k/t-mlibs"
1557                 ;;
1558         esac
1559         extra_parts="crtbegin.o crtend.o"
1560         ;;
1561 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1562         default_m68k_cpu=68020
1563         default_cf_cpu=5475
1564         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1565         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1566         ;;
1567 m68k*-*-openbsd*)
1568         default_m68k_cpu=68020
1569         default_cf_cpu=5475
1570         # needed to unconfuse gdb
1571         tm_defines="${tm_defines} OBSD_OLD_GAS"
1572         tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1573         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1574         # we need collect2 until our bug is fixed...
1575         use_collect2=yes
1576         ;;
1577 m68k-*-uclinuxoldabi*)          # Motorola m68k/ColdFire running uClinux
1578                                 # with uClibc, using the original
1579                                 # m68k-elf-based ABI
1580         default_m68k_cpu=68020
1581         default_cf_cpu=5206
1582         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
1583         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1584         tmake_file="m68k/t-floatlib m68k/t-uclinux"
1585         use_fixproto=no
1586         ;;
1587 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1588                                 # with uClibc, using the new GNU/Linux-style
1589                                 # ABI.
1590         default_m68k_cpu=68020
1591         default_cf_cpu=5206
1592         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1593         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS UCLIBC_DEFAULT=1"
1594         extra_options="${extra_options} linux.opt"
1595         tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1596         use_fixproto=no
1597         ;;
1598 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1599                                 # with ELF format using glibc 2
1600                                 # aka the GNU/Linux C library 6.
1601         default_m68k_cpu=68020
1602         default_cf_cpu=5475
1603         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1604         extra_options="${extra_options} m68k/ieee.opt"
1605         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1606         # if not configured with --enable-sjlj-exceptions, bump the
1607         # libgcc version number
1608         if test x$sjlj != x1; then
1609             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1610         fi
1611         ;;
1612 m68k-*-rtems*)
1613         default_m68k_cpu=68020
1614         default_cf_cpu=5206
1615         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1616         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1617         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1618         extra_parts="crtbegin.o crtend.o"
1619         ;;
1620 mcore-*-elf)
1621         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1622         tmake_file=mcore/t-mcore
1623         use_fixproto=yes
1624         ;;
1625 mcore-*-pe*)
1626         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1627         tmake_file=mcore/t-mcore-pe
1628         use_fixproto=yes
1629         ;;
1630 mips-sgi-irix[56]*)
1631         tm_file="elfos.h ${tm_file} mips/iris.h"
1632         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1633         target_cpu_default="MASK_ABICALLS"
1634         case ${target} in
1635         *-*-irix5*)
1636                 tm_file="${tm_file} mips/iris5.h"
1637                 ;;
1638
1639         *-*-irix6*)
1640                 tm_file="${tm_file} mips/iris6.h"
1641                 tmake_file="${tmake_file} mips/t-iris6"
1642                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1643                 ;;
1644         esac
1645         if test "x$stabs" = xyes
1646         then
1647                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1648         fi
1649         if test "x$gnu_ld" = xyes
1650         then
1651                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1652         fi
1653         case ${enable_threads}:${have_pthread_h} in
1654           "":yes | yes:yes ) thread_file=posix ;;
1655         esac
1656         use_fixproto=yes
1657         ;;
1658 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1659         target_cpu_default="MASK_ABICALLS"
1660         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1661         ;;
1662 mips64*-*-linux*)
1663         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1664         tmake_file="${tmake_file} mips/t-linux64"
1665         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1666         gnu_ld=yes
1667         gas=yes
1668         ;;
1669 mips*-*-linux*)                         # Linux MIPS, either endian.
1670         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1671         case ${target} in
1672         mipsisa32*-*)
1673                 target_cpu_default="MASK_SOFT_FLOAT"
1674                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1675                 ;;
1676         esac
1677         ;;
1678 mips*-*-openbsd*)
1679         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1680         target_cpu_default="MASK_ABICALLS"
1681         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1682         case ${target} in
1683         mips*el-*-openbsd*)
1684             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1685         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1686         esac
1687         ;;
1688 mips*-sde-elf*)
1689         tm_file="elfos.h ${tm_file} mips/elf.h mips/sde.h"
1690         tmake_file="mips/t-sde mips/t-libgcc-mips16"
1691         case ${target} in
1692           mipsisa32r2*)
1693             tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1694             ;;
1695           mipsisa32*)
1696             tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1697             ;;
1698           mipsisa64*)
1699             tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1700             ;;
1701         esac
1702         ;;
1703 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1704 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1705 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1706         tm_file="elfos.h ${tm_file} mips/elf.h"
1707         tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1708         case ${target} in
1709           mipsisa32r2*)
1710             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1711             ;;
1712           mipsisa32*)
1713             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1714             ;;
1715           mipsisa64*)
1716             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1717             ;;
1718         esac
1719         case ${target} in
1720           mipsisa32*-*-elfoabi*)
1721             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1722             tm_file="${tm_file} mips/elfoabi.h"
1723             ;;
1724           mipsisa64*-*-elfoabi*)
1725             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1726             tm_file="${tm_file} mips/elfoabi.h"
1727             ;;
1728           *-*-elf*)
1729             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1730             ;;
1731         esac
1732         ;;
1733 mipsisa64sr71k-*-elf*)
1734         tm_file="elfos.h ${tm_file} mips/elf.h"
1735         tmake_file=mips/t-sr71k
1736         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1737         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1738         use_fixproto=yes
1739         ;;
1740 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1741         tm_file="elfos.h ${tm_file} mips/elf.h"
1742         tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1743         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1744         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1745         use_fixproto=yes
1746         ;;
1747 mips-*-elf* | mipsel-*-elf*)
1748         tm_file="elfos.h ${tm_file} mips/elf.h"
1749         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1750         use_fixproto=yes
1751         ;;
1752 mips64-*-elf* | mips64el-*-elf*)
1753         tm_file="elfos.h ${tm_file} mips/elf.h"
1754         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1755         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1756         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1757         use_fixproto=yes
1758         ;;
1759 mips64vr-*-elf* | mips64vrel-*-elf*)
1760         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1761         tmake_file=mips/t-vr
1762         use_fixproto=yes
1763         ;;
1764 mips64orion-*-elf* | mips64orionel-*-elf*)
1765         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1766         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1767         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1768         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1769         use_fixproto=yes
1770         ;;
1771 mips*-*-rtems*)
1772         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1773         tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1774         ;;
1775 mips-wrs-vxworks)
1776         tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1777         tmake_file="${tmake_file} mips/t-vxworks"
1778         ;;
1779 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1780         xm_defines=POSIX
1781         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1782         tmake_file="${tmake_file} mips/t-elf mips/t-libgcc-mips16"
1783         thread_file=
1784         ;;
1785 mipstx39-*-elf* | mipstx39el-*-elf*)
1786         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1787         tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1788         use_fixproto=yes
1789         ;;
1790 mmix-knuth-mmixware)
1791         need_64bit_hwint=yes
1792         ;;
1793 mn10300-*-*)
1794         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1795         if test x$stabs = xyes
1796         then
1797                 tm_file="${tm_file} dbx.h"
1798         fi
1799         use_collect2=no
1800         use_fixproto=yes
1801         ;;
1802 mt-*-elf)
1803         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1804         tmake_file="${tmake_file} mt/t-mt"
1805         ;;
1806 ns32k-*-netbsdelf*)
1807         echo "GCC does not yet support the ${target} target"; exit 1
1808         ;;
1809 ns32k-*-netbsd*)
1810         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1811         # On NetBSD, the headers are already okay, except for math.h.
1812         tmake_file="t-netbsd ns32k/t-ns32k"
1813         extra_parts=""
1814         use_collect2=yes
1815         ;;
1816 pdp11-*-bsd)
1817         tm_file="${tm_file} pdp11/2bsd.h"
1818         use_fixproto=yes
1819         ;;
1820 pdp11-*-*)
1821         use_fixproto=yes
1822         ;;
1823 # port not yet contributed
1824 #powerpc-*-openbsd*)
1825 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1826 #       extra_headers=
1827 #       ;;
1828 powerpc64-*-linux*)
1829         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1830         test x$with_cpu != x || cpu_is_64bit=yes
1831         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1832         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1833         if test x${enable_secureplt} = xyes; then
1834                 tm_file="rs6000/secureplt.h ${tm_file}"
1835         fi
1836         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1837         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1838         ;;
1839 powerpc64-*-gnu*)
1840         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1841         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1842         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1843         ;;
1844 powerpc-*-beos*)
1845         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1846         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1847         extra_headers=
1848         use_fixproto=yes
1849         ;;
1850 powerpc-*-darwin*)
1851         extra_options="${extra_options} rs6000/darwin.opt"
1852         extra_parts="crt2.o"
1853         case ${target} in
1854           *-darwin1[0-9]* | *-darwin[8-9]*)
1855             tmake_file="${tmake_file} rs6000/t-darwin8"
1856             tm_file="${tm_file} rs6000/darwin8.h"
1857             ;;
1858           *-darwin7*)
1859             tm_file="${tm_file} rs6000/darwin7.h"
1860             ;;
1861           *-darwin[0-6]*)
1862             ;;
1863         esac
1864         extra_headers=altivec.h
1865         ;;
1866 powerpc64-*-darwin*)
1867         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1868         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1869         # We're omitting t-darwin8 to avoid building any multilibs
1870         extra_headers=altivec.h
1871         ;;
1872 powerpc*-*-freebsd*)
1873         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1874         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1875         extra_options="${extra_options} rs6000/sysv4.opt"
1876         ;;
1877 powerpc-*-netbsd*)
1878         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1879         tmake_file="${tmake_file} rs6000/t-netbsd"
1880         extra_options="${extra_options} rs6000/sysv4.opt"
1881         ;;
1882 powerpc-*-chorusos*)
1883         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1884         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1885         extra_options="${extra_options} rs6000/sysv4.opt"
1886         case ${enable_threads} in
1887           yes | posix)
1888             thread_file='posix'
1889             ;;
1890         esac
1891         use_fixproto=yes
1892         ;;
1893 powerpc-*-eabispe*)
1894         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1895         extra_options="${extra_options} rs6000/sysv4.opt"
1896         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1897         ;;
1898 powerpc-*-eabisimaltivec*)
1899         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1900         extra_options="${extra_options} rs6000/sysv4.opt"
1901         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1902         ;;
1903 powerpc-*-eabisim*)
1904         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1905         extra_options="${extra_options} rs6000/sysv4.opt"
1906         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1907         ;;
1908 powerpc-*-elf*)
1909         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1910         extra_options="${extra_options} rs6000/sysv4.opt"
1911         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1912         use_fixproto=yes
1913         ;;
1914 powerpc-*-eabialtivec*)
1915         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1916         extra_options="${extra_options} rs6000/sysv4.opt"
1917         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1918         ;;
1919 powerpc-*-eabi*)
1920         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1921         extra_options="${extra_options} rs6000/sysv4.opt"
1922         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1923         ;;
1924 powerpc-*-rtems*)
1925         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1926         extra_options="${extra_options} rs6000/sysv4.opt"
1927         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1928         ;;
1929 powerpc-*-linux*altivec*)
1930         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1931         extra_options="${extra_options} rs6000/sysv4.opt"
1932         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1933         ;;
1934 powerpc-*-linux*spe*)
1935         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1936         extra_options="${extra_options} rs6000/sysv4.opt"
1937         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1938         ;;
1939 powerpc-*-linux*)
1940         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1941         extra_options="${extra_options} rs6000/sysv4.opt"
1942         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1943         case ${enable_targets}:${cpu_is_64bit} in
1944             *powerpc64* | all:* | *:yes)
1945                 if test x$cpu_is_64bit = xyes; then
1946                     tm_file="${tm_file} rs6000/default64.h"
1947                 fi
1948                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1949                 tmake_file="$tmake_file rs6000/t-linux64"
1950                 extra_options="${extra_options} rs6000/linux64.opt"
1951                 ;;
1952             *)
1953                 tm_file="${tm_file} rs6000/linux.h"
1954                 ;;
1955         esac
1956         if test x${enable_secureplt} = xyes; then
1957                 tm_file="rs6000/secureplt.h ${tm_file}"
1958         fi
1959         ;;
1960 powerpc-*-gnu-gnualtivec*)
1961         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1962         extra_options="${extra_options} rs6000/sysv4.opt"
1963         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1964         if test x$enable_threads = xyes; then
1965                 thread_file='posix'
1966         fi
1967         ;;
1968 powerpc-*-gnu*)
1969         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1970         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1971         extra_options="${extra_options} rs6000/sysv4.opt"
1972         if test x$enable_threads = xyes; then
1973                 thread_file='posix'
1974         fi
1975         ;;
1976 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1977         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1978         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1979         extra_options="${extra_options} rs6000/sysv4.opt"
1980         extra_headers=ppc-asm.h
1981         case ${target} in
1982           *-vxworksae*)
1983             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1984             tmake_file="${tmake_file} rs6000/t-vxworksae"
1985             ;;
1986           *-vxworks*)
1987             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1988             ;;
1989         esac
1990         ;;
1991 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1992         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1993         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1994         extra_options="${extra_options} rs6000/sysv4.opt"
1995         thread_file=""
1996         use_fixproto=yes
1997         ;;
1998 powerpc-*-lynxos*)
1999         xm_defines=POSIX
2000         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2001         tmake_file="t-lynx rs6000/t-lynx"
2002         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2003         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2004         extra_options="${extra_options} lynx.opt"
2005         thread_file=lynx
2006         gnu_ld=yes
2007         gas=yes
2008         ;;
2009 powerpcle-*-sysv*)
2010         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
2011         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
2012         extra_options="${extra_options} rs6000/sysv4.opt"
2013         use_fixproto=yes
2014         ;;
2015 powerpcle-*-elf*)
2016         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
2017         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2018         extra_options="${extra_options} rs6000/sysv4.opt"
2019         use_fixproto=yes
2020         ;;
2021 powerpcle-*-eabisim*)
2022         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2023         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2024         extra_options="${extra_options} rs6000/sysv4.opt"
2025         ;;
2026 powerpcle-*-eabi*)
2027         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2028         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2029         extra_options="${extra_options} rs6000/sysv4.opt"
2030         ;;
2031 powerpc-*-kaos*)
2032         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
2033         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2034         extra_options="${extra_options} rs6000/sysv4.opt"
2035         ;;
2036 powerpcle-*-kaos*)
2037         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
2038         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2039         extra_options="${extra_options} rs6000/sysv4.opt"
2040         ;;
2041 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
2042         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
2043         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
2044         extra_options="${extra_options} rs6000/aix41.opt"
2045         use_collect2=yes
2046         extra_headers=
2047         use_fixproto=yes
2048         ;;
2049 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2050         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
2051         tmake_file=rs6000/t-aix43
2052         extra_options="${extra_options} rs6000/aix64.opt"
2053         use_collect2=yes
2054         thread_file='aix'
2055         extra_headers=
2056         ;;
2057 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2058         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
2059         extra_options="${extra_options} rs6000/aix64.opt"
2060         tmake_file=rs6000/t-aix43
2061         use_collect2=yes
2062         thread_file='aix'
2063         extra_headers=
2064         ;;
2065 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
2066         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
2067         tmake_file=rs6000/t-aix52
2068         extra_options="${extra_options} rs6000/aix64.opt"
2069         use_collect2=yes
2070         thread_file='aix'
2071         extra_headers=
2072         ;;
2073 s390-*-linux*)
2074         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
2075         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
2076         ;;
2077 s390x-*-linux*)
2078         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
2079         tm_p_file=s390/s390-protos.h
2080         md_file=s390/s390.md
2081         extra_modes=s390/s390-modes.def
2082         out_file=s390/s390.c
2083         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
2084         ;;
2085 s390x-ibm-tpf*)
2086         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2087         tm_p_file=s390/s390-protos.h
2088         md_file=s390/s390.md
2089         extra_modes=s390/s390-modes.def
2090         out_file=s390/s390.c
2091         extra_parts="crtbeginS.o crtendS.o"
2092         tmake_file="s390/t-crtstuff s390/t-tpf"
2093         thread_file='tpf'
2094         extra_options="${extra_options} s390/tpf.opt"
2095         ;;
2096 score-*-elf)
2097         tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
2098         tmake_file=score/t-score-elf
2099         extra_objs="score-mdaux.o"
2100         ;;
2101 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
2102 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2103   sh-*-linux* | sh[346lbe]*-*-linux* | \
2104   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2105    sh64-*-netbsd* | sh64l*-*-netbsd*)
2106         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2107         if test x${with_endian} = x; then
2108                 case ${target} in
2109                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2110                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2111                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2112                 shl* | sh64l* | sh*-*-linux* | \
2113                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2114                 sh[1234]*-*-*)                     with_endian=big ;;
2115                 *)                                 with_endian=big,little ;;
2116                 esac
2117         fi
2118         case ${with_endian} in
2119         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
2120         big,little|little,big) ;;
2121         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2122         esac
2123         case ${with_endian} in
2124         little*)        tm_file="sh/little.h ${tm_file}" ;;
2125         esac
2126         tm_file="${tm_file} dbxelf.h elfos.h"
2127         case ${target} in
2128         sh*-*-netbsd*)  ;;
2129         *)              tm_file="${tm_file} svr4.h" ;;
2130         esac
2131         tm_file="${tm_file} sh/elf.h"
2132         case ${target} in
2133         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2134                         tm_file="${tm_file} linux.h sh/linux.h" ;;
2135         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2136                         ;;
2137         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2138         sh*-superh-elf) if test x$with_libgloss != xno; then
2139                                 with_libgloss=yes
2140                                 tm_file="${tm_file} sh/newlib.h"
2141                         fi
2142                         tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
2143                         tmake_file="${tmake_file} sh/t-superh"
2144                         extra_options="${extra_options} sh/superh.opt" ;;
2145         *)              if test x$with_newlib = xyes \
2146                            && test x$with_libgloss = xyes; then
2147                                 tm_file="${tm_file} sh/newlib.h"
2148                         fi
2149                         tm_file="${tm_file} sh/embed-elf.h" ;;
2150         esac
2151         case ${target} in
2152         sh5*-*-netbsd*)
2153                 # SHmedia, 32-bit ABI
2154                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2155                 ;;
2156         sh64*-netbsd*)
2157                 # SHmedia, 64-bit ABI
2158                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2159                 ;;
2160         *-*-netbsd)
2161                 tmake_file="${tmake_file} sh/t-netbsd"
2162                 ;;
2163         sh64*-*-linux*)
2164                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2165                 tm_file="${tm_file} sh/sh64.h"
2166                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2167                 ;;
2168         sh64*)
2169                 tmake_file="${tmake_file} sh/t-sh64"
2170                 tm_file="${tm_file} sh/sh64.h"
2171                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2172                 ;;
2173         *-*-symbianelf*)
2174                 tmake_file="sh/t-symbian"
2175                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2176                 extra_objs="symbian.o"
2177                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2178                 ;;
2179         esac
2180         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2181         case `echo ${target} | sed 's/e[lb]-/-/'` in
2182         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2183         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2184         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2185         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2186         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2187         sh4al)                  sh_cpu_target=sh4al ;;
2188         sh4a*)                  sh_cpu_target=sh4a ;;
2189         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2190         sh4_single*)            sh_cpu_target=sh4-single ;;
2191         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2192         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2193         sh3e*)                  sh_cpu_target=sh3e ;;
2194         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2195         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2196         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2197         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2198         sh2a*)                  sh_cpu_target=sh2a ;;
2199         sh2e*)                  sh_cpu_target=sh2e ;;
2200         sh2*)                   sh_cpu_target=sh2 ;;
2201         *)                      sh_cpu_target=sh1 ;;
2202         esac
2203         # did the user say --without-fp ?
2204         if test x$with_fp = xno; then
2205                 case ${sh_cpu_target} in
2206                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2207                 sh4al | sh1)    ;;
2208                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2209                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2210                 sh3*)           sh_cpu_target=sh3 ;;
2211                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2212                 sh2*)           sh_cpu_target=sh2 ;;
2213                 *)      echo --without-fp not available for $target: ignored
2214                 esac
2215                 tm_defines="$tm_defines STRICT_NOFPU=1"
2216         fi
2217         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2218         case $sh_cpu_default in
2219         sh5-64media-nofpu | sh5-64media | \
2220           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2221           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2222           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2223           sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2224           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2225         "")     sh_cpu_default=${sh_cpu_target} ;;
2226         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2227         esac
2228         sh_multilibs=${with_multilib_list}
2229         if test x${sh_multilibs} = x ; then
2230                 case ${target} in
2231                 sh64-superh-linux* | \
2232                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2233                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2234                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2235                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2236                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2237                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2238                 esac
2239                 if test x$with_fp = xno; then
2240                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2241                 fi
2242         fi
2243         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2244         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2245         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2246         for sh_multilib in ${sh_multilibs}; do
2247                 case ${sh_multilib} in
2248                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2249                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\
2250                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2251                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2252                 sh5-64media | sh5-64media-nofpu | \
2253                 sh5-32media | sh5-32media-nofpu | \
2254                 sh5-compact | sh5-compact-nofpu)
2255                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2256                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2257                         ;;
2258                 *)
2259                         echo "with_multilib_list=${sh_multilib} not supported."
2260                         exit 1
2261                         ;;
2262                 esac
2263         done
2264         if test x${enable_incomplete_targets} = xyes ; then
2265                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2266         fi
2267         use_fixproto=yes
2268         ;;
2269 sh-*-rtemscoff*)
2270         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2271         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2272         ;;
2273 sh-*-rtems*)
2274         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2275         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2276         ;;
2277 sh-wrs-vxworks)
2278         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2279         tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2280         ;;
2281 sh-*-*)
2282         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2283         use_fixproto=yes
2284         ;;
2285 sparc-*-netbsdelf*)
2286         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2287         extra_options="${extra_options} sparc/long-double-switch.opt"
2288         ;;
2289 sparc64-*-openbsd*)
2290         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2291         extra_options="${extra_options} sparc/little-endian.opt"
2292         gas=yes gnu_ld=yes
2293         with_cpu=ultrasparc
2294         ;;
2295 sparc-*-elf*)
2296         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2297         tmake_file="sparc/t-elf sparc/t-crtfm"
2298         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2299         use_fixproto=yes
2300         ;;
2301 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2302         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2303         extra_options="${extra_options} sparc/long-double-switch.opt"
2304         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2305         ;;
2306 sparc-*-rtems*)
2307         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2308         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2309         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2310         ;;
2311 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2312         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2313         case ${target} in
2314         *-*-solaris2.1[0-9]*)
2315                 tm_file="${tm_file} sol2-10.h"
2316                 ;;
2317         esac
2318         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2319         if test x$gnu_ld = xyes; then
2320                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2321         fi
2322         if test x$gas = xyes; then
2323                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2324         fi
2325         tm_file="${tm_file} tm-dwarf2.h"
2326         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2327         if test x$gnu_ld = xyes; then
2328                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2329         else
2330                 tmake_file="$tmake_file t-slibgcc-sld"
2331         fi
2332         c_target_objs="sol2-c.o"
2333         cxx_target_objs="sol2-c.o"
2334         extra_objs="sol2.o"
2335         tm_p_file="${tm_p_file} sol2-protos.h"
2336         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2337         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2338           "":yes:* | yes:yes:* ) thread_file=posix ;;
2339           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2340         esac
2341         need_64bit_hwint=yes
2342         ;;
2343 sparc-*-solaris2*)
2344         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2345         case ${target} in
2346         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2347                 tm_file="${tm_file} sol2-6.h"
2348                 ;;
2349         *-*-solaris2.1[0-9]*)
2350                 tm_file="${tm_file} sol2-10.h"
2351                 ;;
2352         esac
2353         tm_file="${tm_file} sparc/sol2.h"
2354         if test x$gnu_ld = xyes; then
2355                 tm_file="${tm_file} sparc/sol2-gld.h"
2356         fi
2357         if test x$gas = xyes; then
2358                 tm_file="${tm_file} sparc/sol2-gas.h"
2359         fi
2360         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2361         if test x$gnu_ld = xyes; then
2362                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2363         else
2364                 tmake_file="$tmake_file t-slibgcc-sld"
2365         fi
2366         case ${target} in
2367         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2368                 if test x$gnu_ld = xno; then
2369                         tm_file="${tm_file} sparc/sol26-sld.h"
2370                 fi
2371                 ;;
2372         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2373                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2374                 if test x$gnu_ld = xyes; then
2375                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2376                 fi
2377                 if test x$gas = xyes; then
2378                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2379                 fi
2380                 tm_file="${tm_file} tm-dwarf2.h"
2381                 tmake_file="$tmake_file sparc/t-sol2-64"
2382                 need_64bit_hwint=yes
2383                 test x$with_cpu != x || with_cpu=v9
2384                 ;;
2385         esac
2386         c_target_objs="sol2-c.o"
2387         cxx_target_objs="sol2-c.o"
2388         extra_objs="sol2.o"
2389         tm_p_file="${tm_p_file} sol2-protos.h"
2390         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2391         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2392           "":yes:* | yes:yes:* )
2393                 case ${target} in
2394                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2395                         thread_file=posix95
2396                         ;;
2397                   *)
2398                         thread_file=posix
2399                         ;;
2400                 esac
2401                 ;;
2402           "":*:yes | yes:*:yes )
2403                 thread_file=solaris
2404                 ;;
2405         esac
2406         ;;
2407 sparc-*-sysv4*)
2408         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2409         tmake_file=t-svr4
2410         extra_parts="crtbegin.o crtend.o"
2411         use_fixproto=yes
2412         ;;
2413 sparc-wrs-vxworks)
2414         tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2415         tmake_file="${tmake_file} sparc/t-vxworks"
2416         ;;
2417 sparc64-*-elf*)
2418         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2419         extra_options="${extra_options} sparc/little-endian.opt"
2420         tmake_file="${tmake_file} sparc/t-crtfm"
2421         extra_parts="crtbegin.o crtend.o"
2422         use_fixproto=yes
2423         ;;
2424 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2425         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2426         extra_options="${extra_options} sparc/long-double-switch.opt"
2427         tmake_file="${tmake_file} sparc/t-crtfm"
2428         case "x$with_cpu" in
2429                 xultrasparc) ;;
2430                 x) with_cpu=ultrasparc ;;
2431                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2432         esac
2433         need_64bit_hwint=yes
2434         ;;
2435 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2436         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2437         extra_options="${extra_options} sparc/long-double-switch.opt"
2438         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2439         ;;
2440 sparc64-*-netbsd*)
2441         tm_file="sparc/biarch64.h ${tm_file}"
2442         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2443         extra_options="${extra_options} sparc/long-double-switch.opt"
2444         tmake_file="${tmake_file} sparc/t-netbsd64"
2445         ;;
2446 spu-*-elf*)
2447         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2448         tmake_file="spu/t-spu-elf"
2449         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2450         extra_modes=spu/spu-modes.def
2451         c_target_objs="${c_target_objs} spu-c.o"
2452         cxx_target_objs="${cxx_target_objs} spu-c.o"
2453         ;;
2454 strongarm-*-elf*)
2455         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2456         tmake_file="arm/t-arm arm/t-strongarm-elf"
2457         out_file=arm/arm.c
2458         md_file=arm/arm.md
2459         extra_modes=arm/arm-modes.def
2460         use_fixproto=yes
2461         ;;
2462 strongarm-*-pe)
2463         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2464         tmake_file="arm/t-arm arm/t-strongarm-pe"
2465         out_file=arm/arm.c
2466         md_file=arm/arm.md
2467         extra_modes=arm/arm-modes.def
2468         extra_options="${extra_options} arm/pe.opt"
2469         extra_objs=pe.o
2470         use_fixproto=yes
2471         ;;
2472 strongarm-*-kaos*)
2473         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2474         tmake_file="arm/t-arm arm/t-strongarm-elf"
2475         out_file=arm/arm.c
2476         md_file=arm/arm.md
2477         extra_modes=arm/arm-modes.def
2478         ;;
2479 v850e1-*-*)
2480         target_cpu_default="TARGET_CPU_v850e1"
2481         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2482         tm_p_file=v850/v850-protos.h
2483         tmake_file=v850/t-v850e
2484         md_file=v850/v850.md
2485         out_file=v850/v850.c
2486         extra_options="${extra_options} v850/v850.opt"
2487         if test x$stabs = xyes
2488         then
2489                 tm_file="${tm_file} dbx.h"
2490         fi
2491         use_collect2=no
2492         c_target_objs="v850-c.o"
2493         cxx_target_objs="v850-c.o"
2494         use_fixproto=yes
2495         ;;
2496 v850e-*-*)
2497         target_cpu_default="TARGET_CPU_v850e"
2498         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2499         tm_p_file=v850/v850-protos.h
2500         tmake_file=v850/t-v850e
2501         md_file=v850/v850.md
2502         out_file=v850/v850.c
2503         extra_options="${extra_options} v850/v850.opt"
2504         if test x$stabs = xyes
2505         then
2506                 tm_file="${tm_file} dbx.h"
2507         fi
2508         use_collect2=no
2509         c_target_objs="v850-c.o"
2510         cxx_target_objs="v850-c.o"
2511         use_fixproto=yes
2512         ;;
2513 v850-*-*)
2514         target_cpu_default="TARGET_CPU_generic"
2515         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2516         tmake_file=v850/t-v850
2517         if test x$stabs = xyes
2518         then
2519                 tm_file="${tm_file} dbx.h"
2520         fi
2521         use_collect2=no
2522         c_target_objs="v850-c.o"
2523         cxx_target_objs="v850-c.o"
2524         use_fixproto=yes
2525         ;;
2526 vax-*-bsd*)                     # VAXen running BSD
2527         tm_file="${tm_file} vax/bsd.h"
2528         tmake_file=vax/t-memfuncs
2529         use_collect2=yes
2530         use_fixproto=yes
2531         ;;
2532 vax-*-sysv*)                    # VAXen running system V
2533         tm_file="${tm_file} vax/vaxv.h"
2534         tmake_file=vax/t-memfuncs
2535         use_fixproto=yes
2536         ;;
2537 vax-*-netbsdelf*)
2538         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2539         ;;
2540 vax-*-netbsd*)
2541         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2542         tmake_file=t-netbsd
2543         extra_parts=""
2544         use_collect2=yes
2545         ;;
2546 vax-*-openbsd*)
2547         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2548         use_collect2=yes
2549         ;;
2550 vax-*-ultrix*)                  # VAXen running ultrix
2551         tm_file="${tm_file} vax/ultrix.h"
2552         tmake_file=vax/t-memfuncs
2553         use_fixproto=yes
2554         ;;
2555 xscale-*-elf)
2556         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2557         tmake_file="arm/t-arm arm/t-xscale-elf"
2558         out_file=arm/arm.c
2559         md_file=arm/arm.md
2560         extra_modes=arm/arm-modes.def
2561         use_fixproto=yes
2562         ;;
2563 xscale-*-coff)
2564         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2565         tmake_file="arm/t-arm arm/t-xscale-coff"
2566         out_file=arm/arm.c
2567         md_file=arm/arm.md
2568         extra_modes=arm/arm-modes.def
2569         use_fixproto=yes
2570         ;;
2571 xstormy16-*-elf)
2572         # For historical reasons, the target files omit the 'x'.
2573         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2574         tm_p_file=stormy16/stormy16-protos.h
2575         md_file=stormy16/stormy16.md
2576         out_file=stormy16/stormy16.c
2577         extra_options=stormy16/stormy16.opt
2578         tmake_file="stormy16/t-stormy16"
2579         extra_parts="crtbegin.o crtend.o"
2580         use_fixproto=yes
2581         ;;
2582 xtensa-*-elf*)
2583         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2584         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2585         ;;
2586 xtensa-*-linux*)
2587         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2588         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2589         ;;
2590 am33_2.0-*-linux*)
2591         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2592         tmake_file="${tmake_file} mn10300/t-linux"
2593         gas=yes gnu_ld=yes
2594         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2595         use_collect2=no
2596         ;;
2597 m32c-*-elf*)
2598         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2599         c_target_objs="m32c-pragma.o"
2600         cxx_target_objs="m32c-pragma.o"
2601         use_fixproto=yes
2602         ;;
2603 *)
2604         echo "*** Configuration ${target} not supported" 1>&2
2605         exit 1
2606         ;;
2607 esac
2608
2609 case ${target} in
2610 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2611         tmake_file="${tmake_file} i386/t-gmm_malloc"
2612         ;;
2613 i[34567]86-*-linux* | x86_64-*-linux*)
2614         tmake_file="${tmake_file} i386/t-pmm_malloc"
2615         ;;
2616 i[34567]86-*-* | x86_64-*-*)
2617         tmake_file="${tmake_file} i386/t-gmm_malloc"
2618         ;;
2619 esac
2620
2621 # Support for --with-cpu and related options (and a few unrelated options,
2622 # too).
2623 case ${with_cpu} in
2624   yes | no)
2625     echo "--with-cpu must be passed a value" 1>&2
2626     exit 1
2627     ;;
2628 esac
2629
2630 # If there is no $with_cpu option, try to infer one from ${target}.
2631 # This block sets nothing except for with_cpu.
2632 if test x$with_cpu = x ; then
2633   case ${target} in
2634     ep9312-*-*)
2635       # A Cirrus ARM variant.
2636       with_cpu="ep9312"
2637       ;;
2638     i386-*-*)
2639       with_cpu=i386
2640       ;;
2641     i486-*-*)
2642       with_cpu=i486
2643       ;;
2644     i586-*-*)
2645       case ${target_noncanonical} in
2646         k6_2-*)
2647           with_cpu=k6-2
2648           ;;
2649         k6_3-*)
2650           with_cpu=k6-3
2651           ;;
2652         k6-*)
2653           with_cpu=k6
2654           ;;
2655         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2656           with_cpu=pentium-mmx
2657           ;;
2658         *)
2659           with_cpu=pentium
2660           ;;
2661       esac
2662       ;;
2663     i686-*-* | i786-*-*)
2664       case ${target_noncanonical} in
2665         amdfam10-*|barcelona-*)
2666           with_cpu=amdfam10
2667           ;;
2668         k8-*|opteron-*|athlon_64-*)
2669           with_cpu=k8
2670           ;;
2671         athlon_xp-*|athlon_mp-*|athlon_4-*)
2672           with_cpu=athlon-4
2673           ;;
2674         athlon_tbird-*|athlon-*)
2675           with_cpu=athlon
2676           ;;
2677         geode-*)
2678           with_cpu=geode
2679           ;;
2680         pentium2-*)
2681           with_cpu=pentium2
2682           ;;
2683         pentium3-*|pentium3m-*)
2684           with_cpu=pentium3
2685           ;;
2686         pentium4-*|pentium4m-*)
2687           with_cpu=pentium4
2688           ;;
2689         prescott-*)
2690           with_cpu=prescott
2691           ;;
2692         nocona-*)
2693           with_cpu=nocona
2694           ;;
2695         core2-*)
2696           with_cpu=core2
2697           ;;
2698         pentium_m-*)
2699           with_cpu=pentium-m
2700           ;;
2701         pentiumpro-*)
2702           with_cpu=pentiumpro
2703           ;;
2704         *)
2705           with_cpu=generic
2706           ;;
2707       esac
2708       ;;
2709     x86_64-*-*)
2710       case ${target_noncanonical} in
2711         amdfam10-*|barcelona-*)
2712           with_cpu=amdfam10
2713           ;;
2714         k8-*|opteron-*|athlon_64-*)
2715           with_cpu=k8
2716           ;;
2717         nocona-*)
2718           with_cpu=nocona
2719           ;;
2720         core2-*)
2721           with_cpu=core2
2722           ;;
2723         *)
2724           with_cpu=generic
2725           ;;
2726       esac
2727       ;;
2728     alphaev6[78]*-*-*)
2729       with_cpu=ev67
2730       ;;
2731     alphaev6*-*-*)
2732       with_cpu=ev6
2733       ;;
2734     alphapca56*-*-*)
2735       with_cpu=pca56
2736       ;;
2737     alphaev56*-*-*)
2738       with_cpu=ev56
2739       ;;
2740     alphaev5*-*-*)
2741       with_cpu=ev5
2742       ;;
2743     frv-*-*linux* | frv400-*-*linux*)
2744       with_cpu=fr400
2745       ;;
2746     frv550-*-*linux*)
2747       with_cpu=fr550
2748       ;;
2749     m680[012]0-*-*)
2750       with_cpu=`echo ${target} | sed 's/-.*$//'`
2751       ;;
2752     m68k*-*-*)
2753       case "$with_arch" in
2754         "cf")
2755           with_cpu=${default_cf_cpu}
2756           ;;
2757         "" | "m68k")
2758           with_cpu=m${default_m68k_cpu}
2759           ;;
2760       esac
2761       ;;
2762     mips*-*-vxworks)
2763       with_arch=mips2
2764       ;;
2765     sparc*-*-*)
2766       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2767       ;;
2768   esac
2769 fi
2770
2771 # Similarly for --with-float
2772 if test x$with_float = x; then
2773         case ${target} in
2774         ep9312-*-*)
2775                 with_float=hard
2776                 ;;
2777         esac
2778 fi
2779
2780 # Similarly for --with-schedule.
2781 if test x$with_schedule = x; then
2782         case ${target} in
2783         hppa1* | parisc1*)
2784                 # Override default PA8000 scheduling model.
2785                 with_schedule=7100LC
2786                 ;;
2787         esac
2788 fi
2789
2790 # Validate and mark as valid any --with options supported
2791 # by this target.  In order to use a particular --with option
2792 # you must list it in supported_defaults; validating the value
2793 # is optional.  This case statement should set nothing besides
2794 # supported_defaults.
2795
2796 supported_defaults=
2797 case "${target}" in
2798         alpha*-*-*)
2799                 supported_defaults="cpu tune"
2800                 for which in cpu tune; do
2801                         eval "val=\$with_$which"
2802                         case "$val" in
2803                         "" \
2804                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2805                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2806                         | 21264a)
2807                                 ;;
2808                         *)
2809                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2810                                 exit 1
2811                                 ;;
2812                         esac
2813                 done
2814                 ;;
2815
2816         arm*-*-*)
2817                 supported_defaults="arch cpu float tune fpu abi mode"
2818                 for which in cpu tune; do
2819                         # See if it matches any of the entries in arm-cores.def
2820                         eval "val=\$with_$which"
2821                         if [ x"$val" = x ] \
2822                             || grep "^ARM_CORE(\"$val\"," \
2823                                     ${srcdir}/config/arm/arm-cores.def \
2824                                     > /dev/null; then
2825                           # Ok
2826                           new_val=`grep "^ARM_CORE(\"$val\"," \
2827                                 ${srcdir}/config/arm/arm-cores.def | \
2828                                 sed -e 's/^[^,]*,[      ]*//' | \
2829                                 sed -e 's/,.*$//'`
2830                           eval "target_${which}_cname=$new_val"
2831                         echo "For $val real value is $new_val"
2832                           true
2833                         else
2834                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2835                           exit 1
2836                         fi
2837                 done
2838
2839                 case "$with_arch" in
2840                 "" \
2841                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2842                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2843                 | iwmmxt | ep9312)
2844                         # OK
2845                         ;;
2846                 *)
2847                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2848                         exit 1
2849                         ;;
2850                 esac
2851
2852                 case "$with_float" in
2853                 "" \
2854                 | soft | hard | softfp)
2855                         # OK
2856                         ;;
2857                 *)
2858                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2859                         exit 1
2860                         ;;
2861                 esac
2862
2863                 case "$with_fpu" in
2864                 "" \
2865                 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon )
2866                         # OK
2867                         ;;
2868                 *)
2869                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2870                         exit 1
2871                         ;;
2872                 esac
2873
2874                 case "$with_abi" in
2875                 "" \
2876                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2877                         #OK
2878                         ;;
2879                 *)
2880                         echo "Unknown ABI used in --with-abi=$with_abi"
2881                         exit 1
2882                         ;;
2883                 esac
2884
2885                 case "$with_mode" in
2886                 "" \
2887                 | arm | thumb )
2888                         #OK
2889                         ;;
2890                 *)
2891                         echo "Unknown mode used in --with-mode=$with_mode"
2892                         exit 1
2893                         ;;
2894                 esac
2895
2896                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2897                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2898                 fi
2899                 ;;
2900
2901         fr*-*-*linux*)
2902                 supported_defaults=cpu
2903                 case "$with_cpu" in
2904                 fr400) ;;
2905                 fr550) ;;
2906                 *)
2907                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2908                         exit 1
2909                         ;;
2910                 esac
2911                 ;;
2912
2913         fido-*-* | m680[012]0-*-* | m68k*-*-*)
2914                 supported_defaults="arch cpu"
2915                 case "$with_arch" in
2916                 "" | "m68k"| "cf")
2917                         m68k_arch_family="$with_arch"
2918                         ;;
2919                 *)
2920                         echo "Invalid --with-arch=$with_arch" 1>&2
2921                         exit 1
2922                         ;;
2923                 esac
2924
2925                 # We always have a $with_cpu setting here.
2926                 case "$with_cpu" in
2927                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2928                         m68k_cpu_ident=$with_cpu
2929                         ;;
2930                 "m68020-40")
2931                         m68k_cpu_ident=m68020
2932                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2933                         ;;
2934                 "m68020-60")
2935                         m68k_cpu_ident=m68020
2936                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2937                         ;;
2938                 *)
2939                         # We need the C identifier rather than the string.
2940                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2941                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2942                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2943                                  ${srcdir}/config/m68k/m68k-devices.def`
2944                         if [ x"$m68k_cpu_ident" = x ] ; then
2945                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2946                                 exit 1
2947                         fi
2948                         with_cpu="mcpu=$with_cpu"
2949                         ;;
2950                 esac
2951                 ;;
2952
2953         hppa*-*-* | parisc*-*-*)
2954                 supported_defaults="arch schedule"
2955
2956                 case "$with_arch" in
2957                 "" | 1.0 | 1.1 | 2.0)
2958                         # OK
2959                         ;;
2960                 *)
2961                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2962                         exit 1
2963                         ;;
2964                 esac
2965
2966                 case "$with_schedule" in
2967                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2968                         # OK
2969                         ;;
2970                 *)
2971                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2972                         exit 1
2973                         ;;
2974                 esac
2975                 ;;
2976
2977         i[34567]86-*-* | x86_64-*-*)
2978                 supported_defaults="arch cpu tune"
2979                 for which in arch cpu tune; do
2980                         eval "val=\$with_$which"
2981                         case ${val} in
2982                         i386 | i486 \
2983                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2984                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2985                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2986                         | athlon-4 | athlon-xp | athlon-mp | geode \
2987                         | prescott | pentium-m | pentium4m | pentium3m)
2988                                 case "${target}" in
2989                                   x86_64-*-*)
2990                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2991                                       exit 1
2992                                       ;;
2993                                 esac
2994                                 # OK
2995                                 ;;
2996                         "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
2997                                 # OK
2998                                 ;;
2999                         *)
3000                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
3001                                 exit 1
3002                                 ;;
3003                         esac
3004                 done
3005                 ;;
3006
3007         mips*-*-*)
3008                 supported_defaults="abi arch float tune divide"
3009
3010                 case ${with_float} in
3011                 "" | soft | hard)
3012                         # OK
3013                         ;;
3014                 *)
3015                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3016                         exit 1
3017                         ;;
3018                 esac
3019
3020                 case ${with_abi} in
3021                 "" | 32 | o64 | n32 | 64 | eabi)
3022                         # OK
3023                         ;;
3024                 *)
3025                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3026                         exit 1
3027                         ;;
3028                 esac
3029
3030                 case ${with_divide} in
3031                 "" | breaks | traps)
3032                         # OK
3033                         ;;
3034                 *)
3035                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3036                         exit 1
3037                 esac
3038                 ;;
3039
3040         mt-*-*)
3041                 supported_defaults="arch"
3042
3043                 case "$with_arch" in
3044                 "" \
3045                 | ms1-64-001 \
3046                 | ms1-16-002 \
3047                 | ms1-16-003 \
3048                 | ms2 \
3049                 | "")
3050                         # OK
3051                         ;;
3052                 *)
3053                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3054                         exit 1
3055                         ;;
3056                 esac
3057                 ;;
3058
3059         powerpc*-*-* | rs6000-*-*)
3060                 supported_defaults="cpu float tune"
3061
3062                 for which in cpu tune; do
3063                         eval "val=\$with_$which"
3064                         case ${val} in
3065                         default32 | default64)
3066                                 with_which="with_$which"
3067                                 eval $with_which=
3068                                 ;;
3069                         405cr)
3070                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
3071                                 eval "with_$which=405"
3072                                 ;;
3073                         "" | common \
3074                         | power | power[23456] | power6x | powerpc | powerpc64 \
3075                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3076                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
3077                         | 601 | 602 | 603 | 603e | ec603e | 604 \
3078                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3079                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
3080                                 # OK
3081                                 ;;
3082                         *)
3083                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3084                                 exit 1
3085                                 ;;
3086                         esac
3087                 done
3088                 ;;
3089
3090         s390*-*-*)
3091                 supported_defaults="arch mode tune"
3092
3093                 for which in arch tune; do
3094                         eval "val=\$with_$which"
3095                         case ${val} in
3096                         "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec)
3097                                 # OK
3098                                 ;;
3099                         *)
3100                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3101                                 exit 1
3102                                 ;;
3103                         esac
3104                 done
3105
3106                 case ${with_mode} in
3107                 "" | esa | zarch)
3108                         # OK
3109                         ;;
3110                 *)
3111                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3112                         exit 1
3113                         ;;
3114                 esac
3115                 ;;
3116
3117         sh[123456ble]-*-* | sh-*-*)
3118                 supported_defaults="cpu"
3119                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3120                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3121                         # OK
3122                         ;;
3123                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3124                         ;;
3125                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3126                         ;;
3127                 *)
3128                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
3129                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3130                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3131                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3132                         exit 1
3133                         ;;
3134                 esac
3135                 ;;
3136         sparc*-*-*)
3137                 supported_defaults="cpu float tune"
3138
3139                 for which in cpu tune; do
3140                         eval "val=\$with_$which"
3141                         case ${val} in
3142                         "" | sparc | sparcv9 | sparc64 | sparc86x \
3143                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
3144                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3145                         | v9 | ultrasparc | ultrasparc3 | niagara)
3146                                 # OK
3147                                 ;;
3148                         *)
3149                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3150                                 exit 1
3151                                 ;;
3152                         esac
3153                 done
3154
3155                 case ${with_float} in
3156                 "" | soft | hard)
3157                         # OK
3158                         ;;
3159                 *)
3160                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3161                         exit 1
3162                         ;;
3163                 esac
3164                 ;;
3165
3166         spu-*-*)
3167                 supported_defaults="arch tune"
3168
3169                 for which in arch tune; do
3170                         eval "val=\$with_$which"
3171                         case ${val} in
3172                         "" | cell | celledp)
3173                                 # OK
3174                                 ;;
3175                         *)
3176                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3177                                 exit 1
3178                                 ;;
3179                         esac
3180                 done
3181                 ;;
3182
3183         v850*-*-*)
3184                 supported_defaults=cpu
3185                 case ${with_cpu} in
3186                 "" | v850e | v850e1)
3187                         # OK
3188                         ;;
3189                 *)
3190                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3191                         exit 1
3192                         ;;
3193                 esac
3194                 ;;
3195 esac
3196
3197 # Set some miscellaneous flags for particular targets.
3198 target_cpu_default2=
3199 case ${target} in
3200         alpha*-*-*)
3201                 if test x$gas = xyes
3202                 then
3203                         target_cpu_default2="MASK_GAS"
3204                 fi
3205                 ;;
3206
3207         arm*-*-*)
3208                 if test x$target_cpu_cname = x
3209                 then
3210                         target_cpu_default2=TARGET_CPU_generic
3211                 else
3212                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3213                 fi
3214                 ;;
3215
3216         hppa*-*-* | parisc*-*-*)
3217                 target_cpu_default2="MASK_BIG_SWITCH"
3218                 if test x$gas = xyes
3219                 then
3220                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3221                 fi
3222                 ;;
3223
3224         fido*-*-* | m680[012]0-*-* | m68k*-*-*)
3225                 target_cpu_default2=$m68k_cpu_ident
3226                 if [ x"$m68k_arch_family" != x ]; then
3227                         tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3228                 fi
3229                 ;;
3230
3231         mips*-*-*)
3232                 if test x$gnu_ld = xyes
3233                 then
3234                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3235                 fi
3236                 case ${target} in
3237                         mips*el-*-*)
3238                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3239                                 ;;
3240                 esac
3241                 if test "x$enable_gofast" = xyes
3242                 then
3243                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3244                         tmake_file="mips/t-gofast $tmake_file"
3245                 else
3246                         tmake_file="mips/t-mips $tmake_file"
3247                 fi
3248                 ;;
3249
3250         powerpc*-*-* | rs6000-*-*)
3251                 # FIXME: The PowerPC port uses the value set at compile time,
3252                 # although it's only cosmetic.
3253                 if test "x$with_cpu" != x
3254                 then
3255                         target_cpu_default2="\\\"$with_cpu\\\""
3256                 fi
3257                 out_file=rs6000/rs6000.c
3258                 c_target_objs="${c_target_objs} rs6000-c.o"
3259                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3260                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3261
3262                 if test x$enable_e500_double = xyes
3263                 then
3264                         tm_file="$tm_file rs6000/e500-double.h"
3265                 fi
3266                 ;;
3267
3268         sh[123456ble]*-*-* | sh-*-*)
3269                 c_target_objs="${c_target_objs} sh-c.o"
3270                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3271                 ;;
3272
3273         sparc*-*-*)
3274                 # Some standard aliases.
3275                 case x$with_cpu in
3276                 xsparc)
3277                         with_cpu=v7
3278                         ;;
3279                 xsparcv9 | xsparc64)
3280                         with_cpu=v9
3281                         ;;
3282                 esac
3283
3284                 # The SPARC port checks this value at compile-time.
3285                 target_cpu_default2="TARGET_CPU_$with_cpu"
3286                 ;;
3287         v850*-*-*)
3288                 # FIXME: The v850 is "special" in that it does not support
3289                 # runtime CPU selection, only --with-cpu.
3290                 case "x$with_cpu" in
3291                 x)
3292                         ;;
3293                 xv850e)
3294                         target_cpu_default2="TARGET_CPU_$with_cpu"
3295                         ;;
3296                 esac
3297                 ;;
3298 esac
3299
3300 t=
3301 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3302 for option in $all_defaults
3303 do
3304         eval "val=\$with_$option"
3305         if test -n "$val"; then
3306                 case " $supported_defaults " in
3307                 *" $option "*)
3308                         ;;
3309                 *)
3310                         echo "This target does not support --with-$option." 2>&1
3311                         echo "Valid --with options are: $supported_defaults" 2>&1
3312                         exit 1
3313                         ;;
3314                 esac
3315
3316                 if test "x$t" = x
3317                 then
3318                         t="{ \"$option\", \"$val\" }"
3319                 else
3320                         t="${t}, { \"$option\", \"$val\" }"
3321                 fi
3322         fi
3323 done
3324
3325 if test "x$t" = x
3326 then
3327         configure_default_options="{ { NULL, NULL} }"
3328 else
3329         configure_default_options="{ ${t} }"
3330 fi
3331
3332 if test "$target_cpu_default2" != ""
3333 then
3334         if test "$target_cpu_default" != ""
3335         then
3336                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3337         else
3338                 target_cpu_default=$target_cpu_default2
3339         fi
3340 fi