1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # gas_flag Either yes or no depending on whether GNU as was
51 # gnu_ld_flag Either yes or no depending on whether GNU ld was
54 # This file sets the following shell variables for use by the
55 # autoconf-generated configure script:
57 # cpu_type The name of the cpu, if different from the first
58 # chunk of the canonical target name.
60 # tm_defines List of target macros to define for all compilations.
62 # tm_file A list of target macro files, if different from
63 # "$cpu_type/$cpu_type.h". Usually it's constructed
64 # per target in a way like this:
65 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
66 # Note that the preferred order is:
67 # - specific target header "${cpu_type}/${cpu_type.h}"
68 # - generic headers like dbxelf.h elfos.h, etc.
69 # - specializing target headers like ${cpu_type.h}/elf.h
70 # This helps to keep OS specific stuff out of the CPU
71 # defining header ${cpu_type}/${cpu_type.h}.
73 # It is possible to include automatically-generated
74 # build-directory files by prefixing them with "./".
75 # All other files should relative to $srcdir/config.
77 # tm_p_file Location of file with declarations for functions
80 # out_file The name of the machine description C support
81 # file, if different from "$cpu_type/$cpu_type.c".
83 # md_file The name of the machine-description file, if
84 # different from "$cpu_type/$cpu_type.md".
86 # tmake_file A list of machine-description-specific
87 # makefile-fragments, if different from
88 # "$cpu_type/t-$cpu_type".
90 # extra_modes The name of the file containing a list of extra
91 # machine modes, if necessary and different from
92 # "$cpu_type/$cpu_type-modes.def".
94 # extra_objs List of extra objects that should be linked into
95 # the compiler proper (cc1, cc1obj, cc1plus)
96 # depending on target.
98 # extra_gcc_objs List of extra objects that should be linked into
99 # the compiler driver (gcc) depending on target.
101 # extra_headers List of used header files from the directory
102 # config/${cpu_type}.
104 # use_gcc_tgmath If set, add tgmath.h to the list of used header
107 # use_gcc_stdint If "wrap", install a version of stdint.h that
108 # wraps the system's copy for hosted compilations;
109 # if "provide", provide a version of systems without
110 # such a system header; otherwise "none", do not
111 # provide such a header at all.
113 # extra_passes List of extra executables compiled for this target
114 # machine, used for compiling from source to object.
116 # extra_parts List of extra object files that should be compiled
117 # for this target machine.
119 # extra_programs Like extra_passes, but these are used when linking.
121 # extra_options List of target-dependent .opt files.
123 # c_target_objs List of extra target-dependent objects that be
124 # linked into the C compiler only.
126 # cxx_target_objs List of extra target-dependent objects that be
127 # linked into the C++ compiler only.
129 # fortran_target_objs List of extra target-dependent objects that be
130 # linked into the fortran compiler only.
132 # target_gtfiles List of extra source files with type information.
134 # xm_defines List of macros to define when compiling for the
137 # xm_file List of files to include when compiling for the
140 # use_collect2 Set to yes or no, depending on whether collect2
143 # target_cpu_default Set to override the default target model.
145 # gdb_needs_out_file_path
146 # Set to yes if gdb needs a dir command with
147 # `dirname $out_file`.
149 # thread_file Set to control which thread package to use.
151 # gas Set to yes or no depending on whether the target
152 # system normally uses GNU as.
154 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
155 # for this target. This is true if this target
156 # supports "long" or "wchar_t" wider than 32 bits,
157 # or BITS_PER_WORD is wider than 32 bits.
158 # The setting made here must match the one made in
159 # other locations such as libcpp/configure.ac
161 # configure_default_options
162 # Set to an initializer for configure_default_options
163 # in configargs.h, based on --with-cpu et cetera.
165 # The following variables are used in each case-construct to build up the
166 # outgoing variables:
168 # gnu_ld Set to yes or no depending on whether the target
169 # system normally uses GNU ld.
187 # Set this to force installation and use of collect2.
189 # Set this to override the default target model.
191 # Set this if gdb needs a dir command with `dirname $out_file`
192 gdb_needs_out_file_path=
193 # Set this to control which thread package will be used.
195 # Reinitialize these from the flag values every loop pass, since some
196 # configure entries modify them.
198 gnu_ld="$gnu_ld_flag"
199 default_use_cxa_atexit=no
203 # Selects the object file format reader/writer used by LTO.
204 lto_binary_reader=lto-elf
206 # Don't carry these over build->host->target. Please.
210 # Obsolete configurations.
213 | mips-sgi-irix6.[0-4]* \
216 if test "x$enable_obsolete" != xyes; then
217 echo "*** Configuration ${target} is obsolete." >&2
218 echo "*** Specify --enable-obsolete to build it anyway." >&2
219 echo "*** Support will be REMOVED in the next major release of GCC," >&2
220 echo "*** unless a maintainer comes forward." >&2
225 # Unsupported targets list. Do not put an entry in this list unless
226 # it would otherwise be caught by a more permissive pattern. The list
227 # should be in alphabetical order.
230 | i[34567]86-*-go32* \
231 | mips64orion*-*-rtems* \
233 | sparc-hal-solaris2* \
241 | *-*-solaris2.[0-7] \
242 | *-*-solaris2.[0-7].* \
246 echo "*** Configuration ${target} not supported" 1>&2
251 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
252 # updated in each machine entry. Also set default extra_headers for some
255 cpu_type=`echo ${target} | sed 's/-.*$//'`
260 tmake_file=m32c/t-m32c
271 extra_headers="mmintrin.h arm_neon.h"
272 c_target_objs="arm-c.o"
273 cxx_target_objs="arm-c.o"
277 c_target_objs="avr-c.o"
278 cxx_target_objs="avr-c.o"
288 moxie*) cpu_type=moxie
292 extra_headers=math-68881.h
296 c_target_objs="i386-c.o"
297 cxx_target_objs="i386-c.o"
298 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
299 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
300 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
301 immintrin.h x86intrin.h avxintrin.h xopintrin.h
302 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
307 c_target_objs="i386-c.o"
308 cxx_target_objs="i386-c.o"
309 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
310 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
311 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
312 immintrin.h x86intrin.h avxintrin.h xopintrin.h
313 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
318 extra_headers=ia64intrin.h
328 extra_headers=math-68881.h
333 extra_headers="loongson.h"
340 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
343 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
366 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
367 sh[123456789lbe]*-*-* | sh-*-*)
373 tm_file=${cpu_type}/${cpu_type}.h
374 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
376 tm_p_file=${cpu_type}/${cpu_type}-protos.h
379 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
381 extra_modes=${cpu_type}/${cpu_type}-modes.def
383 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
385 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
390 if test "x$enable_cld" = xyes; then
391 tm_defines="${tm_defines} USE_IX86_CLD=1"
393 tm_file="vxworks-dummy.h ${tm_file}"
396 tm_file="i386/biarch64.h ${tm_file}"
397 if test "x$enable_cld" = xyes; then
398 tm_defines="${tm_defines} USE_IX86_CLD=1"
400 tm_file="vxworks-dummy.h ${tm_file}"
404 # On a.out targets, we need to use collect2.
411 # Common parts for widely ported systems.
414 tm_file="${tm_file} darwin.h"
417 tm_file="${tm_file} darwin9.h"
419 *-*-darwin[12][0-9]*)
420 tm_file="${tm_file} darwin9.h darwin10.h"
423 tm_file="${tm_file} ${cpu_type}/darwin.h"
424 tm_p_file="${tm_p_file} darwin-protos.h"
425 tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
426 target_gtfiles="\$(srcdir)/config/darwin.c"
427 extra_options="${extra_options} darwin.opt"
428 c_target_objs="${c_target_objs} darwin-c.o"
429 cxx_target_objs="${cxx_target_objs} darwin-c.o"
430 fortran_target_objs="darwin-f.o"
431 extra_objs="darwin.o"
432 extra_gcc_objs="darwin-driver.o"
433 default_use_cxa_atexit=yes
435 case ${enable_threads} in
436 "" | yes | posix) thread_file='posix' ;;
439 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
440 # This is the place-holder for the generic a.out configuration
441 # of FreeBSD. No actual configuration resides here since
442 # there was only ever a bare-bones ix86 configuration for
443 # a.out and it exists solely in the machine-specific section.
444 # This place-holder must exist to avoid dropping into
445 # the generic ELF configuration of FreeBSD (i.e. it must be
446 # ordered before that section).
449 # This is the generic ELF configuration of FreeBSD. Later
450 # machine-specific sections may refine and add to this
453 # Due to tm_file entry ordering issues that vary between cpu
454 # architectures, we only define fbsd_tm_file to allow the
455 # machine-specific section to dictate the final order of all
456 # entries of tm_file with the minor exception that components
457 # of the tm_file set here will always be of the form:
459 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
461 # The machine-specific section should not tamper with this
462 # ordering but may order all other entries of tm_file as it
463 # pleases around the provided core setting.
466 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
467 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
468 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
469 tmake_file="t-slibgcc-elf-ver t-freebsd"
470 case ${enable_threads} in
472 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
476 tmake_file="${tmake_file} t-freebsd-thread"
477 # Before 5.0, FreeBSD can't bind shared libraries to -lc
478 # when "optionally" threaded via weak pthread_* checks.
480 *-*-freebsd[34] | *-*-freebsd[34].*)
481 tmake_file="${tmake_file} t-slibgcc-nolc-override"
486 echo 'Unknown thread configuration for FreeBSD'
490 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
495 default_use_cxa_atexit=yes;;
497 # need_64bit_hwint=yes # system compiler has this for all arch!
500 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
501 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
504 case ${enable_threads} in
505 "" | yes | posix) thread_file='posix' ;;
507 tmake_file="t-slibgcc-elf-ver t-linux"
509 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
512 tmake_file="$tmake_file t-gnu";;
514 # glibc / uclibc switch. uclibc isn't usable for GNU/Hurd and neither for
518 extra_options="$extra_options linux.opt";;
520 tm_defines="$tm_defines OPTION_GLIBC=1";;
524 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
527 tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
530 # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
531 default_use_cxa_atexit=yes
536 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
540 # NetBSD 2.0 and later get POSIX threads enabled by default.
541 # Allow them to be explicitly enabled on any other version.
542 case ${enable_threads} in
545 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
547 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
553 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
557 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
558 # ELF configurations. We will clear extra_parts in the
559 # a.out configurations.
561 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
562 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
566 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
567 # default (unless overridden by --disable-__cxa_atexit).
569 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
570 default_use_cxa_atexit=yes
575 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
576 case ${enable_threads} in
579 tmake_file="${tmake_file} t-openbsd-thread"
583 *-*-openbsd2.*|*-*-openbsd3.[012])
584 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
588 case ${enable_threads} in
589 yes) thread_file='rtems' ;;
599 extra_options="${extra_options} vxworks.opt"
601 case ${enable_threads} in
603 "" | yes | vxworks) thread_file='vxworks' ;;
604 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
608 # Assume that newlib is being used and so __cxa_atexit is provided.
609 default_use_cxa_atexit=yes
615 # Support site-specific machine types.
617 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
618 tm_file=${cpu_type}/$rest.h
619 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
620 then xm_file=${cpu_type}/xm-$rest.h
622 if test -f $srcdir/config/${cpu_type}/t-$rest
623 then tmake_file=${cpu_type}/t-$rest
627 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
628 target_cpu_default="MASK_GAS"
629 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
632 tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
633 target_cpu_default="MASK_GAS"
634 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
637 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
638 target_cpu_default="MASK_GAS"
639 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
640 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
643 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
644 target_cpu_default="MASK_GAS"
645 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
648 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
649 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
650 # default x-alpha is only appropriate for dec-osf.
651 target_cpu_default="MASK_GAS"
652 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
655 if test x$stabs = xyes
657 tm_file="${tm_file} dbx.h"
659 if test x$gas != xyes
661 extra_passes="mips-tfile mips-tdump"
664 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
665 tm_file="${tm_file} alpha/osf5.h"
666 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
667 extra_headers=va_list.h
668 use_gcc_stdint=provide
669 case ${enable_threads} in
672 tmake_file="${tmake_file} alpha/t-osf-pthread"
677 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
678 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
679 tmake_file="alpha/t-alpha vms/t-vms vms/t-vms64 alpha/t-vms alpha/t-ieee"
682 install_headers_dir=install-headers-cp
683 extra_options="${extra_options} vms/vms.opt"
686 tm_file="${tm_file} alpha/vms.h"
687 xm_file="alpha/xm-vms.h"
688 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
691 install_headers_dir=install-headers-cp
692 extra_options="${extra_options} vms/vms.opt"
695 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
696 extra_parts="crtinit.o crtfini.o"
699 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
700 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
703 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
704 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
707 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
708 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
711 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
712 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
716 arm*-*-linux*) # ARM GNU/Linux with ELF
717 tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
720 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
723 tmake_file="${tmake_file} t-linux arm/t-arm"
726 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
727 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
728 # The BPABI long long divmod functions return a 128-bit value in
729 # registers r0-r3. Correctly modeling that requires the use of
732 # The EABI requires the use of __cxa_atexit.
733 default_use_cxa_atexit=yes
736 tmake_file="$tmake_file arm/t-linux"
739 tm_file="$tm_file arm/aout.h arm/arm.h"
740 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
742 arm*-*-uclinux*) # ARM ucLinux
743 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
744 tmake_file="arm/t-arm arm/t-arm-elf"
747 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
748 tmake_file="$tmake_file arm/t-bpabi"
749 # The BPABI long long divmod functions return a 128-bit value in
750 # registers r0-r3. Correctly modeling that requires the use of
753 # The EABI requires the use of __cxa_atexit.
754 default_use_cxa_atexit=yes
756 tm_file="$tm_file arm/aout.h arm/arm.h"
757 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
760 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
761 tmake_file="arm/t-arm arm/t-arm-elf"
762 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
764 arm*-*-eabi* | arm*-*-symbianelf* )
765 # The BPABI long long divmod functions return a 128-bit value in
766 # registers r0-r3. Correctly modeling that requires the use of
769 default_use_cxa_atexit=yes
770 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
771 tmake_file="arm/t-arm arm/t-arm-elf"
774 tm_file="$tm_file arm/eabi.h newlib-stdint.h"
775 tmake_file="${tmake_file} arm/t-bpabi"
776 extra_options="${extra_options} arm/eabi.opt"
780 tm_file="${tm_file} arm/symbian.h"
781 # We do not include t-bpabi for Symbian OS because the system
782 # provides its own implementation of the BPABI functions.
783 tmake_file="${tmake_file} arm/t-symbian"
786 tm_file="${tm_file} arm/aout.h arm/arm.h"
787 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
790 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
791 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
792 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
795 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
796 tmake_file="arm/t-arm arm/t-arm-elf"
797 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
800 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
801 tmake_file="arm/t-arm arm/t-wince-pe"
802 extra_options="${extra_options} arm/pe.opt"
806 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
807 tmake_file="arm/t-arm arm/t-pe"
809 extra_options="${extra_options} arm/pe.opt"
813 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
814 tmake_file="avr/t-avr t-rtems avr/t-rtems"
815 extra_gcc_objs="driver-avr.o avr-devices.o"
816 extra_objs="avr-devices.o"
819 tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
821 extra_gcc_objs="driver-avr.o avr-devices.o"
822 extra_objs="avr-devices.o"
825 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
826 tmake_file=bfin/t-bfin-elf
830 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
831 tmake_file=bfin/t-bfin-uclinux
832 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
833 extra_options="${extra_options} linux.opt"
837 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
838 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
839 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
843 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
844 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
847 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
848 tmake_file=bfin/t-bfin
852 crisv32-*-elf | crisv32-*-none)
853 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
854 tmake_file="cris/t-cris"
855 target_cpu_default=32
857 extra_options="${extra_options} cris/elf.opt"
860 cris-*-elf | cris-*-none)
861 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
862 tmake_file="cris/t-cris cris/t-elfmulti"
864 extra_options="${extra_options} cris/elf.opt"
867 crisv32-*-linux* | cris-*-linux*)
868 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
869 # We need to avoid using t-linux, so override default tmake_file
870 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
871 extra_options="${extra_options} cris/linux.opt"
874 target_cpu_default=10
877 target_cpu_default=32
882 tm_file="elfos.h newlib-stdint.h ${tm_file}"
883 extra_parts="crtbegin.o crtend.o"
887 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
888 tmake_file=fr30/t-fr30
889 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
892 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} frv/frv-abi.h"
896 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
897 linux.h glibc-stdint.h frv/linux.h frv/frv-abi.h"
898 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
903 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
904 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
905 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
910 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
911 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
912 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
913 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
914 extra_options="${extra_options} linux.opt"
917 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
918 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
921 tmake_file="h8300/t-h8300 h8300/t-elf"
922 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
925 target_cpu_default="MASK_PA_11|MASK_PA_20"
926 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
927 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
929 tmake_file="${tmake_file} pa/t-linux64"
934 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
935 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
936 pa/pa32-regs.h pa/pa32-linux.h"
937 tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
938 # Set the libgcc version number
939 if test x$sjlj = x1; then
940 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
942 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
945 # port not yet contributed.
947 # target_cpu_default="MASK_PA_11"
951 hppa1.1-*-* | hppa2*-*-*)
952 target_cpu_default="MASK_PA_11"
955 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
956 pa/pa-hpux.h pa/pa-hpux10.h"
957 extra_options="${extra_options} pa/pa-hpux.opt"
960 tm_file="${tm_file} pa/pa-hpux1010.h"
961 extra_options="${extra_options} pa/pa-hpux1010.opt"
964 use_gcc_stdint=provide
965 tm_file="${tm_file} hpux-stdint.h"
966 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
967 case ${enable_threads} in
969 if test x$have_pthread_h = xyes ; then
970 tmake_file="${tmake_file} pa/t-dce-thr"
974 tmake_file="${tmake_file} pa/t-dce-thr"
977 # Set the libgcc version number
978 if test x$sjlj = x1; then
979 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
981 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
987 target_cpu_default="MASK_PA_11|MASK_PA_20"
988 if test x$gnu_ld = xyes
990 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
992 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
993 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
997 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
998 extra_options="${extra_options} pa/pa-hpux1111.opt"
1001 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1004 extra_options="${extra_options} pa/pa-hpux.opt \
1005 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1006 need_64bit_hwint=yes
1007 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1008 # Set the libgcc version number
1009 if test x$sjlj = x1; then
1010 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1012 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1014 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1016 case x${enable_threads} in
1024 use_gcc_stdint=provide
1025 tm_file="${tm_file} hpux-stdint.h"
1029 tm_file="${tm_file} hpux-stdint.h"
1033 hppa[12]*-*-hpux11*)
1035 hppa1.1-*-* | hppa2*-*-*)
1036 target_cpu_default="MASK_PA_11"
1039 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1040 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1041 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1044 tm_file="${tm_file} pa/pa-hpux1111.h"
1045 extra_options="${extra_options} pa/pa-hpux1111.opt"
1048 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1049 # Set the libgcc version number
1050 if test x$sjlj = x1; then
1051 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1053 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1055 case x${enable_threads} in
1064 use_gcc_stdint=provide
1065 tm_file="${tm_file} hpux-stdint.h"
1069 tm_file="${tm_file} hpux-stdint.h"
1073 i[34567]86-*-darwin*)
1074 need_64bit_hwint=yes
1077 # This is so that '.../configure && make' doesn't fail due to
1078 # config.guess deciding that the configuration is i386-*-darwin* and
1079 # then this file using that to set --with-cpu=i386 which has no -m64
1081 with_cpu=${with_cpu:-generic}
1082 tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
1083 lto_binary_reader=lto-macho
1086 with_cpu=${with_cpu:-generic}
1087 tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1088 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1089 lto_binary_reader=lto-macho
1092 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1093 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1096 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1097 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1099 i[34567]86-*-freebsd*)
1100 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1103 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1104 tmake_file="${tmake_file} i386/t-crtstuff"
1106 i[34567]86-*-netbsdelf*)
1107 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1109 i[34567]86-*-netbsd*)
1110 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1111 tmake_file="${tmake_file} t-netbsd"
1116 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1117 tmake_file="${tmake_file} i386/t-crtstuff"
1119 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1120 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1121 # needed to unconfuse gdb
1122 tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1123 # we need collect2 until our bug is fixed...
1126 i[34567]86-*-openbsd*)
1127 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1128 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1132 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1133 # Intel 80386's running GNU/*
1134 # with ELF format using glibc 2
1135 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
1137 i[34567]86-*-linux*)
1138 if test x$enable_targets = xall; then
1139 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1140 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1141 tmake_file="${tmake_file} i386/t-linux64"
1142 need_64bit_hwint=yes
1144 case X"${with_cpu}" in
1145 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1148 if test x$with_cpu_64 = x; then
1153 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1154 echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1159 tm_file="${tm_file} i386/linux.h"
1162 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1163 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1164 i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1165 i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1167 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1169 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1170 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
1171 i386/x86-64.h i386/linux64.h"
1173 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1174 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1176 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1178 i[34567]86-pc-msdosdjgpp*)
1179 xm_file=i386/xm-djgpp.h
1180 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1181 tmake_file="${tmake_file} i386/t-djgpp"
1182 extra_options="${extra_options} i386/djgpp.opt"
1187 i[34567]86-*-lynxos*)
1189 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1190 tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1191 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1192 extra_options="${extra_options} lynx.opt"
1197 i[3456x]86-*-netware*)
1198 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1199 tmake_file="${tmake_file} i386/t-netware"
1200 extra_objs=netware.o
1203 extra_objs="$extra_objs nwld.o"
1204 tm_file="${tm_file} i386/nwld.h"
1205 tmake_file="${tmake_file} i386/t-nwld"
1206 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1209 case x${enable_threads} in
1210 x | xyes | xposix) thread_file='posix';;
1211 xnks) thread_file='nks';;
1213 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1216 i[34567]86-*-nto-qnx*)
1217 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1218 tmake_file="${tmake_file} i386/t-nto"
1222 i[34567]86-*-rtems*)
1223 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1224 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1225 tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1227 i[34567]86-*-solaris2*)
1228 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1229 # Set default arch_32 to pentium4, tune_32 to generic like the other
1230 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1231 with_arch_32=${with_arch_32:-pentium4}
1232 with_tune_32=${with_tune_32:-generic}
1234 *-*-solaris2.1[0-9]*)
1235 tm_file="${tm_file} sol2-10.h"
1238 tm_file="${tm_file} i386/sol2.h"
1239 if test x$gnu_ld = xyes; then
1240 tm_file="${tm_file} sol2-gld.h"
1242 if test x$gas = xyes; then
1243 tm_file="${tm_file} i386/sol2-gas.h"
1245 tmake_file="${tmake_file} t-sol2 t-svr4"
1246 c_target_objs="${c_target_objs} sol2-c.o"
1247 cxx_target_objs="${cxx_target_objs} sol2-c.o"
1249 tm_p_file="${tm_p_file} sol2-protos.h"
1250 if test x$gnu_ld = xyes; then
1251 tmake_file="$tmake_file t-slibgcc-elf-ver"
1252 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1254 tmake_file="$tmake_file t-slibgcc-sld"
1256 if test x$gas = xyes; then
1257 tm_file="usegas.h ${tm_file}"
1259 tm_file="$tm_file tm-dwarf2.h"
1261 *-*-solaris2.1[0-9]*)
1262 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1263 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1264 tmake_file="$tmake_file i386/t-sol2-10"
1265 # i386/t-crtstuff only affects libgcc. Its inclusion
1266 # depends on a runtime test and is thus performed in
1267 # libgcc/configure.ac instead.
1268 need_64bit_hwint=yes
1271 case X"${with_cpu}" in
1272 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1275 if test x$with_cpu_64 = x; then
1280 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1281 echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1287 use_gcc_stdint=provide
1290 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1291 "":yes:* | yes:yes:* )
1294 "":*:yes | yes:*:yes )
1299 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1300 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1303 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1304 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1307 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1308 tmake_file="${tmake_file} i386/t-vxworks"
1312 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1313 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1314 xm_file=i386/xm-cygwin.h
1315 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1316 if test x$sjlj = x0; then
1317 tmake_eh_file="i386/t-dw2-eh"
1319 tmake_eh_file="i386/t-sjlj-eh"
1321 tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
1322 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1323 extra_options="${extra_options} i386/cygming.opt"
1324 extra_objs="winnt.o winnt-stubs.o"
1325 c_target_objs="${c_target_objs} cygwin2.o msformat-c.o"
1326 cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o"
1327 extra_gcc_objs=cygwin1.o
1328 if test x$enable_threads = xyes; then
1332 lto_binary_reader=lto-coff
1334 i[34567]86-*-mingw* | x86_64-*-mingw*)
1335 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1336 xm_file=i386/xm-mingw32.h
1338 x86_64-*-* | *-w64-*)
1339 need_64bit_hwint=yes
1345 # This makes the logic if mingw's or the w64 feature set has to be used
1348 tm_file="${tm_file} i386/mingw-w64.h"
1349 if test x$enable_targets = xall; then
1350 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1351 case X"${with_cpu}" in
1352 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1355 if test x$with_cpu_64 = x; then
1360 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1361 echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1370 tm_file="${tm_file} i386/mingw-stdint.h"
1371 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1372 if test x$sjlj = x0; then
1373 tmake_eh_file="i386/t-dw2-eh"
1375 tmake_eh_file="i386/t-sjlj-eh"
1377 tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
1380 tmake_file="${tmake_file} i386/t-mingw-w64"
1383 tmake_file="${tmake_file} i386/t-mingw-w32"
1386 tmake_file="${tmake_file} i386/t-mingw32"
1389 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1390 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1393 extra_options="${extra_options} i386/mingw-w64.opt"
1398 extra_objs="winnt.o winnt-stubs.o"
1399 c_target_objs="${c_target_objs} msformat-c.o"
1400 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1401 default_use_cxa_atexit=yes
1403 lto_binary_reader=lto-coff
1404 case ${enable_threads} in
1405 "" | yes | win32) thread_file='win32'
1406 tmake_file="${tmake_file} i386/t-gthr-win32"
1411 tmake_file="${tmake_file} i386/t-crtfm"
1418 tm_file="${tm_file} i386/crtdll.h"
1420 *mingw32msv* | *mingw*)
1424 i[34567]86-*-interix3*)
1425 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1426 tmake_file="${tmake_file} i386/t-interix"
1428 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1429 if test x$enable_threads = xyes ; then
1432 if test x$stabs = xyes ; then
1433 tm_file="${tm_file} dbxcoff.h"
1437 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1438 tmake_file="ia64/t-ia64"
1439 target_cpu_default="0"
1440 if test x$gas = xyes
1442 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1444 if test x$gnu_ld = xyes
1446 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1448 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1451 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1452 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1453 tmake_file="${tmake_file} ia64/t-ia64"
1454 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1457 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1458 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1459 if test x$with_system_libunwind != xyes ; then
1460 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1462 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1463 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1466 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1467 tmake_file="ia64/t-ia64 ia64/t-hpux"
1468 target_cpu_default="MASK_GNU_AS"
1469 case x$enable_threads in
1475 c_target_objs="ia64-c.o"
1476 cxx_target_objs="ia64-c.o"
1477 extra_options="${extra_options} ia64/ilp32.opt"
1479 tm_file="${tm_file} hpux-stdint.h"
1482 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1483 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1484 tmake_file="vms/t-vms vms/t-vms64 ia64/t-ia64 ia64/t-vms"
1485 xmake_file=vms/x-vms
1486 target_cpu_default="0"
1487 if test x$gas = xyes
1489 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1492 install_headers_dir=install-headers-cp
1493 extra_options="${extra_options} vms/vms.opt"
1496 tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
1497 tmake_file=iq2000/t-iq2000
1498 out_file=iq2000/iq2000.c
1499 md_file=iq2000/iq2000.md
1502 tm_file="dbxelf.h elfos.h ${tm_file}"
1503 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1506 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h"
1507 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1508 tmake_file="${tmake_file} t-rtems"
1511 tm_file="dbxelf.h elfos.h ${tm_file} linux.h lm32/uclinux-elf.h"
1512 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1515 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1516 extra_parts="crtinit.o crtfini.o"
1519 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
1520 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1523 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1524 tmake_file="m32r/t-m32r t-rtems"
1525 extra_parts="crtinit.o crtfini.o"
1528 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1529 # We override the tmake_file for linux -- why?
1530 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1532 if test x$enable_threads = xyes; then
1537 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1538 # We override the tmake_file for linux -- why?
1539 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1541 if test x$enable_threads = xyes; then
1545 # m68hc11 and m68hc12 share the same machine description.
1546 m68hc11-*-*|m6811-*-*)
1547 tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1548 tm_p_file="m68hc11/m68hc11-protos.h"
1549 md_file="m68hc11/m68hc11.md"
1550 out_file="m68hc11/m68hc11.c"
1551 tmake_file="m68hc11/t-m68hc11"
1554 m68hc12-*-*|m6812-*-*)
1555 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1556 tm_p_file="m68hc11/m68hc11-protos.h"
1557 md_file="m68hc11/m68hc11.md"
1558 out_file="m68hc11/m68hc11.c"
1559 tmake_file="m68hc11/t-m68hc11"
1560 extra_options="${extra_options} m68hc11/m68hc11.opt"
1563 m68k-*-elf* | fido-*-elf*)
1566 # Check that $with_cpu makes sense.
1571 echo "Cannot accept --with-cpu=$with_cpu"
1578 default_m68k_cpu=68020
1582 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1583 tm_defines="${tm_defines} MOTOROLA=1"
1584 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1585 # Add multilibs for targets other than fido.
1590 tmake_file="$tmake_file m68k/t-mlibs"
1593 extra_parts="crtbegin.o crtend.o"
1596 default_m68k_cpu=68020
1598 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1599 tm_defines="${tm_defines} MOTOROLA=1"
1602 default_m68k_cpu=68020
1604 # needed to unconfuse gdb
1605 tm_defines="${tm_defines} OBSD_OLD_GAS"
1606 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1607 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1608 # we need collect2 until our bug is fixed...
1611 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1612 # with uClibc, using the original
1613 # m68k-elf-based ABI
1614 default_m68k_cpu=68020
1616 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1617 tm_defines="${tm_defines} MOTOROLA=1"
1618 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1620 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1621 # with uClibc, using the new GNU/Linux-style
1623 default_m68k_cpu=68020
1625 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1626 tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
1627 extra_options="${extra_options} linux.opt"
1628 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1630 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1631 # with ELF format using glibc 2
1632 # aka the GNU/Linux C library 6.
1633 default_m68k_cpu=68020
1635 with_arch=${with_arch:-m68k}
1636 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1637 extra_options="${extra_options} m68k/ieee.opt"
1638 tm_defines="${tm_defines} MOTOROLA=1"
1639 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1640 # if not configured with --enable-sjlj-exceptions, bump the
1641 # libgcc version number
1642 if test x$sjlj != x1; then
1643 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1647 default_m68k_cpu=68020
1649 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1650 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1651 tm_defines="${tm_defines} MOTOROLA=1"
1652 extra_parts="crtbegin.o crtend.o"
1655 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1656 tmake_file=mcore/t-mcore
1660 tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1661 tmake_file=mcore/t-mcore-pe
1666 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1667 tmake_file=mep/t-mep
1668 extra_parts="crtbegin.o crtend.o"
1669 c_target_objs="mep-pragma.o"
1670 cxx_target_objs="mep-pragma.o"
1671 if test -d "${srcdir}/../newlib/libc/include" &&
1672 test "x$with_headers" = x; then
1678 tm_file="elfos.h ${tm_file} mips/iris6.h"
1679 tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
1680 target_cpu_default="MASK_ABICALLS"
1681 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1682 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1684 if test "x$stabs" = xyes
1686 tm_file="${tm_file} dbx.h"
1688 if test "x$gnu_ld" = xyes
1690 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1692 case ${enable_threads}:${have_pthread_h} in
1693 "":yes | yes:yes ) thread_file=posix ;;
1696 mips*-*-netbsd*) # NetBSD/mips, either endian.
1697 target_cpu_default="MASK_ABICALLS"
1698 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1700 mips64*-*-linux* | mipsisa64*-*-linux*)
1701 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1702 tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1703 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1705 mips64el-st-linux-gnu)
1706 tm_file="${tm_file} mips/st.h"
1707 tmake_file="${tmake_file} mips/t-st"
1709 mips64octeon*-*-linux*)
1710 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1711 target_cpu_default=MASK_SOFT_FLOAT_ABI
1713 mipsisa64r2*-*-linux*)
1714 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1719 test x$with_llsc != x || with_llsc=yes
1721 mips*-*-linux*) # Linux MIPS, either endian.
1722 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1723 tmake_file="${tmake_file} mips/t-libgcc-mips16"
1726 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1729 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1731 test x$with_llsc != x || with_llsc=yes
1734 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1735 target_cpu_default="MASK_ABICALLS"
1736 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1739 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1740 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1744 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1745 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1746 case "${with_newlib}" in
1748 # newlib / libgloss.
1751 # MIPS toolkit libraries.
1752 tm_file="$tm_file mips/sdemtk.h"
1753 tmake_file="$tmake_file mips/t-sdemtk"
1754 extra_options="$extra_options mips/sdemtk.opt"
1755 case ${enable_threads} in
1757 thread_file='mipssde'
1764 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1767 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1770 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1773 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1777 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1778 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1779 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1780 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1781 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1782 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1785 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1788 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1791 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1794 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1798 mipsisa32*-*-elfoabi*)
1799 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1800 tm_file="${tm_file} mips/elfoabi.h"
1802 mipsisa64*-*-elfoabi*)
1803 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1804 tm_file="${tm_file} mips/elfoabi.h"
1807 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1811 mipsisa64sr71k-*-elf*)
1812 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1813 tmake_file=mips/t-sr71k
1814 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1815 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1817 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1818 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1819 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1820 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1821 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1823 mips-*-elf* | mipsel-*-elf*)
1824 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1825 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1827 mips64-*-toppers* | mips64el-*-toppers*)
1828 tm_file="elfos.h ${tm_file} mips/elf.h mips/toppers.h"
1829 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1830 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1832 mips64-*-elf* | mips64el-*-elf*)
1833 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1834 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1835 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1836 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1838 mips64vr-*-elf* | mips64vrel-*-elf*)
1839 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1840 tmake_file=mips/t-vr
1841 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1843 mips64orion-*-elf* | mips64orionel-*-elf*)
1844 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1845 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1846 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1847 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1850 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1851 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1854 tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1855 tmake_file="${tmake_file} mips/t-vxworks"
1857 mipstx39-*-elf* | mipstx39el-*-elf*)
1858 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1859 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1861 mmix-knuth-mmixware)
1862 tm_file="${tm_file} newlib-stdint.h"
1863 need_64bit_hwint=yes
1867 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1868 if test x$stabs = xyes
1870 tm_file="${tm_file} dbx.h"
1876 tm_file="${tm_file} newlib-stdint.h"
1880 tm_file="${tm_file} newlib-stdint.h"
1883 # port not yet contributed
1884 #powerpc-*-openbsd*)
1885 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1889 extra_options="${extra_options} rs6000/darwin.opt"
1890 extra_parts="crt2.o"
1892 *-darwin1[0-9]* | *-darwin[8-9]*)
1893 tmake_file="${tmake_file} rs6000/t-darwin8"
1894 tm_file="${tm_file} rs6000/darwin8.h"
1897 tm_file="${tm_file} rs6000/darwin7.h"
1902 lto_binary_reader=lto-macho
1903 extra_headers=altivec.h
1905 powerpc64-*-darwin*)
1906 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1907 extra_options="${extra_options} ${cpu_type}/darwin.opt"
1908 # We're omitting t-darwin8 to avoid building any multilibs
1909 lto_binary_reader=lto-macho
1910 extra_headers=altivec.h
1912 powerpc*-*-freebsd*)
1913 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1914 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1915 extra_options="${extra_options} rs6000/sysv4.opt"
1918 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1919 tmake_file="${tmake_file} rs6000/t-netbsd"
1920 extra_options="${extra_options} rs6000/sysv4.opt"
1923 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1924 extra_options="${extra_options} rs6000/sysv4.opt"
1925 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1928 powerpc-*-eabisimaltivec*)
1929 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1930 extra_options="${extra_options} rs6000/sysv4.opt"
1931 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1935 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1936 extra_options="${extra_options} rs6000/sysv4.opt"
1937 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1941 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
1942 extra_options="${extra_options} rs6000/sysv4.opt"
1943 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1945 powerpc-*-eabialtivec*)
1946 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1947 extra_options="${extra_options} rs6000/sysv4.opt"
1948 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1951 powerpc-xilinx-eabi*)
1952 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
1953 extra_options="${extra_options} rs6000/sysv4.opt"
1954 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
1958 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1959 extra_options="${extra_options} rs6000/sysv4.opt"
1960 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1964 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1965 extra_options="${extra_options} rs6000/sysv4.opt"
1966 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1968 powerpc-*-linux* | powerpc64-*-linux*)
1969 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1970 extra_options="${extra_options} rs6000/sysv4.opt"
1971 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1974 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
1975 echo "*** Configuration ${target} not supported" 1>&2
1978 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
1982 test x$with_cpu != x || cpu_is_64bit=yes
1986 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
1987 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
1988 if test x$cpu_is_64bit = xyes; then
1989 tm_file="${tm_file} rs6000/default64.h"
1991 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
1992 tmake_file="$tmake_file rs6000/t-linux64"
1993 extra_options="${extra_options} rs6000/linux64.opt"
1996 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
1999 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
2001 powerpc*-*-linux*altivec*)
2002 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2003 powerpc*-*-linux*spe*)
2004 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2005 powerpc*-*-linux*paired*)
2006 tm_file="${tm_file} rs6000/750cl.h" ;;
2008 if test x${enable_secureplt} = xyes; then
2009 tm_file="rs6000/secureplt.h ${tm_file}"
2013 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
2014 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
2015 tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
2017 powerpc-*-gnu-gnualtivec*)
2018 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
2019 extra_options="${extra_options} rs6000/sysv4.opt"
2020 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2021 if test x$enable_threads = xyes; then
2026 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
2027 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
2028 extra_options="${extra_options} rs6000/sysv4.opt"
2029 if test x$enable_threads = xyes; then
2033 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2034 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
2035 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
2036 extra_options="${extra_options} rs6000/sysv4.opt"
2037 extra_headers=ppc-asm.h
2040 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
2041 tmake_file="${tmake_file} rs6000/t-vxworksae"
2044 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2050 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2051 tmake_file="t-lynx rs6000/t-lynx"
2052 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2053 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2054 extra_options="${extra_options} lynx.opt"
2060 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2061 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2062 extra_options="${extra_options} rs6000/sysv4.opt"
2064 powerpcle-*-eabisim*)
2065 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2066 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2067 extra_options="${extra_options} rs6000/sysv4.opt"
2071 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2072 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2073 extra_options="${extra_options} rs6000/sysv4.opt"
2076 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2077 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2078 tmake_file=rs6000/t-aix43
2079 extra_options="${extra_options} rs6000/aix64.opt"
2082 use_gcc_stdint=provide
2085 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2086 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2087 extra_options="${extra_options} rs6000/aix64.opt"
2088 tmake_file=rs6000/t-aix43
2094 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2095 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2096 tmake_file=rs6000/t-aix52
2097 extra_options="${extra_options} rs6000/aix64.opt"
2103 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2104 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2105 tmake_file=rs6000/t-aix52
2106 extra_options="${extra_options} rs6000/aix64.opt"
2110 extra_headers=altivec.h
2112 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2113 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2114 tmake_file=rs6000/t-aix52
2115 extra_options="${extra_options} rs6000/aix64.opt"
2119 extra_headers=altivec.h
2122 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
2123 tmake_file="${tmake_file} rx/t-rx"
2126 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2129 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2130 tm_p_file=s390/s390-protos.h
2131 md_file=s390/s390.md
2132 extra_modes=s390/s390-modes.def
2133 out_file=s390/s390.c
2134 tmake_file="${tmake_file} s390/t-linux64"
2137 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2138 tm_p_file=s390/s390-protos.h
2139 md_file=s390/s390.md
2140 extra_modes=s390/s390-modes.def
2141 out_file=s390/s390.c
2142 extra_parts="crtbeginS.o crtendS.o"
2144 extra_options="${extra_options} s390/tpf.opt"
2147 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2148 tmake_file=score/t-score-elf
2149 extra_objs="score7.o score3.o"
2151 sh-*-elf* | sh[12346l]*-*-elf* | \
2152 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2153 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2154 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2155 sh64-*-netbsd* | sh64l*-*-netbsd*)
2156 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2157 if test x${with_endian} = x; then
2159 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2160 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2161 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2162 shl* | sh64l* | sh*-*-linux* | \
2163 sh5l* | sh-superh-elf) with_endian=little,big ;;
2164 sh[1234]*-*-*) with_endian=big ;;
2165 *) with_endian=big,little ;;
2168 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2169 # First word : the default endian.
2170 # Second word: the secondary endian (optional).
2171 case ${with_endian} in
2172 big) TM_ENDIAN_CONFIG=mb ;;
2173 little) TM_ENDIAN_CONFIG=ml ;;
2174 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2175 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2176 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2178 case ${with_endian} in
2179 little*) tm_file="sh/little.h ${tm_file}" ;;
2181 tm_file="${tm_file} dbxelf.h elfos.h"
2184 *) tm_file="${tm_file} svr4.h" ;;
2186 tm_file="${tm_file} sh/elf.h"
2188 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2189 tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
2190 sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2191 sh*-superh-elf) if test x$with_libgloss != xno; then
2193 tm_file="${tm_file} sh/newlib.h"
2195 tm_file="${tm_file} sh/embed-elf.h"
2196 tm_file="${tm_file} sh/superh.h"
2197 tmake_file="${tmake_file} sh/t-superh"
2198 extra_options="${extra_options} sh/superh.opt" ;;
2199 *) if test x$with_newlib = xyes \
2200 && test x$with_libgloss = xyes; then
2201 tm_file="${tm_file} sh/newlib.h"
2203 tm_file="${tm_file} sh/embed-elf.h" ;;
2207 # SHmedia, 32-bit ABI
2208 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2211 # SHmedia, 64-bit ABI
2212 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2215 tmake_file="${tmake_file} sh/t-netbsd"
2218 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2219 tm_file="${tm_file} sh/sh64.h"
2220 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2223 tmake_file="${tmake_file} sh/t-sh64"
2224 tm_file="${tm_file} sh/sh64.h"
2225 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2228 tmake_file="sh/t-symbian"
2229 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2230 c_target_objs="symbian-base.o symbian-c.o"
2231 cxx_target_objs="symbian-base.o symbian-cxx.o"
2232 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2235 tm_file="${tm_file} newlib-stdint.h"
2238 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2239 case `echo ${target} | sed 's/e[lb]-/-/'` in
2240 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2241 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2242 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2243 sh4a_single*) sh_cpu_target=sh4a-single ;;
2244 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2245 sh4al) sh_cpu_target=sh4al ;;
2246 sh4a*) sh_cpu_target=sh4a ;;
2247 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2248 sh4_single*) sh_cpu_target=sh4-single ;;
2249 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2250 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2251 sh3e*) sh_cpu_target=sh3e ;;
2252 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2253 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2254 sh2a_single*) sh_cpu_target=sh2a-single ;;
2255 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2256 sh2a*) sh_cpu_target=sh2a ;;
2257 sh2e*) sh_cpu_target=sh2e ;;
2258 sh2*) sh_cpu_target=sh2 ;;
2259 *) sh_cpu_target=sh1 ;;
2261 # did the user say --without-fp ?
2262 if test x$with_fp = xno; then
2263 case ${sh_cpu_target} in
2264 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2266 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2267 sh4*) sh_cpu_target=sh4-nofpu ;;
2268 sh3*) sh_cpu_target=sh3 ;;
2269 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2270 sh2*) sh_cpu_target=sh2 ;;
2271 *) echo --without-fp not available for $target: ignored
2273 tm_defines="$tm_defines STRICT_NOFPU=1"
2275 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2276 case $sh_cpu_default in
2277 sh5-64media-nofpu | sh5-64media | \
2278 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2279 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2280 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2281 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2282 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2283 "") sh_cpu_default=${sh_cpu_target} ;;
2284 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2286 sh_multilibs=${with_multilib_list}
2287 if test "$sh_multilibs" = "default" ; then
2289 sh64-superh-linux* | \
2290 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2291 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2292 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2293 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2294 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2295 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2297 if test x$with_fp = xno; then
2298 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2301 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2302 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2303 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2304 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^sh/m/i' -e 's/ sh/ m/gi' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2305 for sh_multilib in ${sh_multilibs}; do
2306 case ${sh_multilib} in
2307 m1 | m2 | m2e | m3 | m3e | \
2308 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2309 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2310 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2311 m5-64media | m5-64media-nofpu | \
2312 m5-32media | m5-32media-nofpu | \
2313 m5-compact | m5-compact-nofpu)
2314 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2315 # It is passed to MULTIILIB_OPTIONS verbatim.
2316 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2317 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2319 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2320 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2321 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2323 echo "with_multilib_list=${sh_multilib} not supported."
2328 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2329 if test x${enable_incomplete_targets} = xyes ; then
2330 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2332 tm_file="$tm_file ./sysroot-suffix.h"
2333 tmake_file="$tmake_file t-sysroot-suffix"
2336 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2337 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2340 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2341 tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2344 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2345 extra_options="${extra_options} sparc/long-double-switch.opt"
2348 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2349 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2350 extra_options="${extra_options} sparc/little-endian.opt"
2355 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2356 tmake_file="sparc/t-elf sparc/t-crtfm"
2357 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2359 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
2360 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
2361 extra_options="${extra_options} sparc/long-double-switch.opt"
2362 tmake_file="${tmake_file} sparc/t-linux"
2363 if test x$enable_targets = xall; then
2364 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2365 tmake_file="${tmake_file} sparc/t-linux64"
2367 tm_file="${tm_file} sparc/linux.h"
2369 tmake_file="${tmake_file} sparc/t-crtfm"
2372 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2373 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2374 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2377 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2379 *-*-solaris2.1[0-9]*)
2380 tm_file="${tm_file} sol2-10.h"
2384 use_gcc_stdint=provide
2387 tm_file="${tm_file} sparc/sol2.h"
2389 sparc64-*-* | sparcv9-*-*)
2390 tm_file="${tm_file} sparc/sol2-64.h"
2393 test x$with_cpu != x || with_cpu=v9
2396 tm_file="${tm_file} sparc/sol2-bi.h"
2397 if test x$gas = xyes; then
2398 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2400 if test x$gnu_ld = xyes; then
2401 tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
2403 tm_file="${tm_file} tm-dwarf2.h"
2404 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2405 if test x$gnu_ld = xyes; then
2406 tmake_file="$tmake_file t-slibgcc-elf-ver"
2408 tmake_file="$tmake_file t-slibgcc-sld"
2410 if test x$gas = xyes; then
2411 tm_file="usegas.h ${tm_file}"
2413 c_target_objs="sol2-c.o"
2414 cxx_target_objs="sol2-c.o"
2416 tm_p_file="${tm_p_file} sol2-protos.h"
2417 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2418 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2419 "":yes:* | yes:yes:* )
2422 "":*:yes | yes:*:yes )
2428 tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2429 tmake_file="${tmake_file} sparc/t-vxworks"
2432 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2433 extra_options="${extra_options} sparc/little-endian.opt"
2434 tmake_file="${tmake_file} sparc/t-crtfm"
2435 extra_parts="crtbegin.o crtend.o"
2437 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2438 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2439 extra_options="${extra_options} sparc/long-double-switch.opt"
2440 tmake_file="${tmake_file} sparc/t-crtfm"
2441 case "x$with_cpu" in
2443 x) with_cpu=ultrasparc ;;
2444 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2447 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
2448 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
2449 extra_options="${extra_options} sparc/long-double-switch.opt"
2450 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2453 tm_file="sparc/biarch64.h ${tm_file}"
2454 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2455 extra_options="${extra_options} sparc/long-double-switch.opt"
2456 tmake_file="${tmake_file} sparc/t-netbsd64"
2459 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2460 tmake_file="spu/t-spu-elf"
2461 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2462 extra_modes=spu/spu-modes.def
2463 c_target_objs="${c_target_objs} spu-c.o"
2464 cxx_target_objs="${cxx_target_objs} spu-c.o"
2467 target_cpu_default="TARGET_CPU_v850e1"
2468 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2469 tm_p_file=v850/v850-protos.h
2470 tmake_file=v850/t-v850e
2471 md_file=v850/v850.md
2472 out_file=v850/v850.c
2473 extra_options="${extra_options} v850/v850.opt"
2474 if test x$stabs = xyes
2476 tm_file="${tm_file} dbx.h"
2479 c_target_objs="v850-c.o"
2480 cxx_target_objs="v850-c.o"
2484 target_cpu_default="TARGET_CPU_v850e"
2485 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2486 tm_p_file=v850/v850-protos.h
2487 tmake_file=v850/t-v850e
2488 md_file=v850/v850.md
2489 out_file=v850/v850.c
2490 extra_options="${extra_options} v850/v850.opt"
2491 if test x$stabs = xyes
2493 tm_file="${tm_file} dbx.h"
2496 c_target_objs="v850-c.o"
2497 cxx_target_objs="v850-c.o"
2501 target_cpu_default="TARGET_CPU_generic"
2502 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2503 tmake_file=v850/t-v850
2504 if test x$stabs = xyes
2506 tm_file="${tm_file} dbx.h"
2509 c_target_objs="v850-c.o"
2510 cxx_target_objs="v850-c.o"
2514 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
2515 tmake_file="${tmake_file} vax/t-linux"
2518 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2521 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2527 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2531 # For historical reasons, the target files omit the 'x'.
2532 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
2533 tm_p_file=stormy16/stormy16-protos.h
2534 md_file=stormy16/stormy16.md
2535 out_file=stormy16/stormy16.c
2536 extra_options=stormy16/stormy16.opt
2537 tmake_file="stormy16/t-stormy16"
2538 extra_parts="crtbegin.o crtend.o"
2541 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
2542 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2545 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
2546 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2549 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
2550 tmake_file="${tmake_file} mn10300/t-linux"
2552 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2556 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2557 tmake_file="${tmake_file} t-rtems"
2558 c_target_objs="m32c-pragma.o"
2559 cxx_target_objs="m32c-pragma.o"
2562 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2563 c_target_objs="m32c-pragma.o"
2564 cxx_target_objs="m32c-pragma.o"
2567 echo "*** Configuration ${target} not supported" 1>&2
2573 i[34567]86-*-linux* | x86_64-*-linux*)
2574 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2576 i[34567]86-*-* | x86_64-*-*)
2577 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2579 powerpc*-*-* | rs6000-*-*)
2580 tm_file="${tm_file} rs6000/option-defaults.h"
2583 # Support for --with-cpu and related options (and a few unrelated options,
2587 echo "--with-cpu must be passed a value" 1>&2
2592 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2593 # to generic if there is no processor scheduler model for the target.
2596 arch_without_sse2=no
2597 arch_without_64bit=no
2602 arch_without_sse2=yes
2603 arch_without_64bit=yes
2608 arch_without_sse2=yes
2609 arch_without_64bit=yes
2612 arch_without_sse2=yes
2613 arch_without_64bit=yes
2614 case ${target_noncanonical} in
2627 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2637 i686-*-* | i786-*-*)
2638 case ${target_noncanonical} in
2643 amdfam10-*|barcelona-*)
2647 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2651 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2655 athlon_xp-*|athlon_mp-*|athlon_4-*)
2658 arch_without_sse2=yes
2659 arch_without_64bit=yes
2661 athlon_tbird-*|athlon-*)
2664 arch_without_sse2=yes
2669 arch_without_sse2=yes
2674 arch_without_sse2=yes
2676 pentium3-*|pentium3m-*)
2679 arch_without_sse2=yes
2681 pentium4-*|pentium4m-*)
2708 arch_without_sse2=yes
2713 arch_without_sse2=yes
2714 arch_without_64bit=yes
2719 case ${target_noncanonical} in
2724 amdfam10-*|barcelona-*)
2728 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2732 k8-*|opteron-*|athlon_64-*)
2756 # If there is no $with_cpu option, try to infer one from ${target}.
2757 # This block sets nothing except for with_cpu.
2758 if test x$with_cpu = x ; then
2760 i[34567]86-*-*|x86_64-*-*)
2778 frv-*-*linux* | frv400-*-*linux*)
2785 case "$with_arch" in
2787 with_cpu=${default_cf_cpu}
2790 with_cpu=m${default_m68k_cpu}
2798 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2802 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2804 i[34567]86-*-*|x86_64-*-*)
2805 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2806 if test x$with_cpu_32 = x; then
2807 with_cpu_32=$with_cpu
2809 if test x$with_cpu_64 = x; then
2810 with_cpu_64=$with_cpu
2818 # Support for --with-arch and related options (and a few unrelated options,
2820 case ${with_arch} in
2822 echo "--with-arch must be passed a value" 1>&2
2827 # If there is no $with_arch option, try to infer one from ${target}.
2828 # This block sets nothing except for with_arch.
2829 if test x$with_arch = x ; then
2831 i[34567]86-*-darwin*|x86_64-*-darwin*)
2832 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2833 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2836 # --with-fpmath sets the default ISA to SSE2, which is the same
2837 # ISA supported by Pentium 4.
2838 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2849 # Avoid overriding --with-arch-32 and --with-arch-64 values.
2851 i[34567]86-*-darwin*|x86_64-*-darwin*)
2852 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2853 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2855 i[34567]86-*-*|x86_64-*-*)
2856 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2857 if test x$with_arch_32 = x; then
2858 with_arch_32=$with_arch
2860 if test x$with_arch_64 = x; then
2861 if test $arch_without_64bit = yes; then
2862 # Set the default 64bit arch to x86-64 if the default arch
2863 # doesn't support 64bit.
2866 with_arch_64=$with_arch
2870 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
2871 # Set the default 64bit arch to x86-64 if the default arch
2872 # doesn't support 64bit and we need 64bit ISA.
2873 with_arch_32=$with_arch
2881 # Support --with-fpmath.
2882 if test x$with_fpmath != x; then
2884 i[34567]86-*-* | x86_64-*-*)
2885 case ${with_fpmath} in
2887 tm_file="${tm_file} i386/ssemath.h"
2890 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
2896 echo "--with-fpmath isn't supported for $target." 1>&2
2902 # Similarly for --with-schedule.
2903 if test x$with_schedule = x; then
2906 # Override default PA8000 scheduling model.
2907 with_schedule=7100LC
2912 # Validate and mark as valid any --with options supported
2913 # by this target. In order to use a particular --with option
2914 # you must list it in supported_defaults; validating the value
2915 # is optional. This case statement should set nothing besides
2916 # supported_defaults.
2921 supported_defaults="cpu tune"
2922 for which in cpu tune; do
2923 eval "val=\$with_$which"
2926 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2927 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2931 echo "Unknown CPU used in --with-$which=$val" 1>&2
2939 supported_defaults="arch cpu float tune fpu abi mode"
2940 for which in cpu tune; do
2941 # See if it matches any of the entries in arm-cores.def
2942 eval "val=\$with_$which"
2943 if [ x"$val" = x ] \
2944 || grep "^ARM_CORE(\"$val\"," \
2945 ${srcdir}/config/arm/arm-cores.def \
2948 new_val=`grep "^ARM_CORE(\"$val\"," \
2949 ${srcdir}/config/arm/arm-cores.def | \
2950 sed -e 's/^[^,]*,[ ]*//' | \
2952 eval "target_${which}_cname=$new_val"
2953 echo "For $val real value is $new_val"
2956 echo "Unknown CPU used in --with-$which=$val" 1>&2
2961 case "$with_arch" in
2963 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2964 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
2965 | armv7 | armv7-a | armv7-r | armv7-m \
2970 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2975 case "$with_float" in
2977 | soft | hard | softfp)
2981 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2988 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
2989 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
2990 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
2991 | fpv4-sp-d16 | neon-vfpv4)
2995 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3002 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3006 echo "Unknown ABI used in --with-abi=$with_abi"
3011 case "$with_mode" in
3017 echo "Unknown mode used in --with-mode=$with_mode"
3022 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3023 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3028 supported_defaults=cpu
3033 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3039 fido-*-* | m68k*-*-*)
3040 supported_defaults="arch cpu"
3041 case "$with_arch" in
3043 m68k_arch_family="$with_arch"
3046 echo "Invalid --with-arch=$with_arch" 1>&2
3051 # We always have a $with_cpu setting here.
3053 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3054 m68k_cpu_ident=$with_cpu
3057 m68k_cpu_ident=m68020
3058 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3061 m68k_cpu_ident=m68020
3062 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3065 # We need the C identifier rather than the string.
3066 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3067 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3068 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3069 ${srcdir}/config/m68k/m68k-devices.def`
3070 if [ x"$m68k_cpu_ident" = x ] ; then
3071 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3074 with_cpu="mcpu=$with_cpu"
3080 supported_defaults="arch schedule"
3082 case "$with_arch" in
3083 "" | 1.0 | 1.1 | 2.0)
3087 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3092 case "$with_schedule" in
3093 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3097 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3103 i[34567]86-*-* | x86_64-*-*)
3104 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3105 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3106 eval "val=\$with_$which"
3109 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3110 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3111 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3112 | athlon-4 | athlon-xp | athlon-mp | geode \
3113 | prescott | pentium-m | pentium4m | pentium3m)
3120 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3128 "" | x86-64 | generic | native \
3129 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3130 | opteron-sse3 | athlon-fx | bdver1 | amdfam10 \
3131 | barcelona | nocona | core2 | atom)
3135 echo "Unknown CPU given in --with-$which=$val." 1>&2
3143 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3145 case ${with_float} in
3150 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3156 "" | 32 | o64 | n32 | 64 | eabi)
3160 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3165 case ${with_divide} in
3166 "" | breaks | traps)
3170 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3175 case ${with_llsc} in
3186 echo "Unknown llsc type used in --with-llsc" 1>&2
3191 case ${with_mips_plt} in
3196 with_mips_plt=no-plt
3201 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3206 case ${with_synci} in
3211 # No is the default.
3215 echo "Unknown synci type used in --with-synci" 1>&2
3221 powerpc*-*-* | rs6000-*-*)
3222 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3224 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3225 eval "val=\$with_$which"
3227 default32 | default64)
3232 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3236 with_which="with_$which"
3240 tm_defines="${tm_defines} CONFIG_PPC405CR"
3241 eval "with_$which=405"
3244 | power | power[234567] | power6x | powerpc | powerpc64 \
3245 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3246 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3247 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3248 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3249 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 \
3250 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3254 echo "Unknown cpu used in --with-$which=$val." 1>&2
3262 supported_defaults="arch mode tune"
3264 for which in arch tune; do
3265 eval "val=\$with_$which"
3267 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
3271 echo "Unknown cpu used in --with-$which=$val." 1>&2
3277 case ${with_mode} in
3282 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3288 sh[123456ble]-*-* | sh-*-*)
3289 supported_defaults="cpu"
3290 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3291 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3294 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3296 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3299 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3300 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3301 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3302 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3308 supported_defaults="cpu float tune"
3310 for which in cpu tune; do
3311 eval "val=\$with_$which"
3313 "" | sparc | sparcv9 | sparc64 | sparc86x \
3314 | v7 | cypress | v8 | supersparc | sparclite | f930 \
3315 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3316 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3320 echo "Unknown cpu used in --with-$which=$val" 1>&2
3326 case ${with_float} in
3331 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3338 supported_defaults="arch tune"
3340 for which in arch tune; do
3341 eval "val=\$with_$which"
3343 "" | cell | celledp)
3347 echo "Unknown cpu used in --with-$which=$val." 1>&2
3355 supported_defaults=cpu
3357 "" | v850e | v850e1)
3361 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3368 # Set some miscellaneous flags for particular targets.
3369 target_cpu_default2=
3372 if test x$gas = xyes
3374 target_cpu_default2="MASK_GAS"
3379 if test x$target_cpu_cname = x
3381 target_cpu_default2=TARGET_CPU_generic
3383 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3388 target_cpu_default2="MASK_BIG_SWITCH"
3389 if test x$gas = xyes
3391 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3395 fido*-*-* | m68k*-*-*)
3396 target_cpu_default2=$m68k_cpu_ident
3397 if [ x"$m68k_arch_family" != x ]; then
3398 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3402 i[34567]86-*-darwin* | x86_64-*-darwin*)
3403 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3405 i[34567]86-*-linux* | x86_64-*-linux* | \
3406 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3408 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3410 i[34567]86-*-solaris2*)
3411 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3413 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3414 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3417 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3421 if test x$gnu_ld = xyes
3423 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3427 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3430 if test "x$enable_gofast" = xyes
3432 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3433 tmake_file="mips/t-gofast $tmake_file"
3435 tmake_file="mips/t-mips $tmake_file"
3439 powerpc*-*-* | rs6000-*-*)
3440 # FIXME: The PowerPC port uses the value set at compile time,
3441 # although it's only cosmetic.
3442 if test "x$with_cpu" != x
3444 target_cpu_default2="\\\"$with_cpu\\\""
3446 out_file=rs6000/rs6000.c
3447 c_target_objs="${c_target_objs} rs6000-c.o"
3448 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3449 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3451 if test x$enable_e500_double = xyes
3453 tm_file="$tm_file rs6000/e500-double.h"
3457 sh[123456ble]*-*-* | sh-*-*)
3458 c_target_objs="${c_target_objs} sh-c.o"
3459 cxx_target_objs="${cxx_target_objs} sh-c.o"
3463 # Some standard aliases.
3468 xsparcv9 | xsparc64)
3473 # The SPARC port checks this value at compile-time.
3474 target_cpu_default2="TARGET_CPU_$with_cpu"
3477 # FIXME: The v850 is "special" in that it does not support
3478 # runtime CPU selection, only --with-cpu.
3479 case "x$with_cpu" in
3483 target_cpu_default2="TARGET_CPU_$with_cpu"
3490 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3491 for option in $all_defaults
3493 eval "val=\$with_"`echo $option | sed s/-/_/g`
3494 if test -n "$val"; then
3495 case " $supported_defaults " in
3499 echo "This target does not support --with-$option." 2>&1
3500 echo "Valid --with options are: $supported_defaults" 2>&1
3507 t="{ \"$option\", \"$val\" }"
3509 t="${t}, { \"$option\", \"$val\" }"
3516 configure_default_options="{ { NULL, NULL} }"
3518 configure_default_options="{ ${t} }"
3521 if test "$target_cpu_default2" != ""
3523 if test "$target_cpu_default" != ""
3525 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3527 target_cpu_default=$target_cpu_default2