gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 2, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING.  If not, write to the Free
  19 #Software Foundation, 59 Temple Place - Suite 330, Boston, MA
  20 #02111-1307, USA.
  21
  22 # This is the GCC target-specific configuration file
  23 # where a configuration type is mapped to different system-specific
  24 # definitions and files.  This is invoked by the autoconf-generated
  25 # configure script.  Putting it in a separate shell file lets us skip
  26 # running autoconf when modifying target-specific information.
  27
  28 # This file switches on the shell variable ${target}, and also uses the
  29 # following shell variables:
  30 #
  31 #  with_*               Various variables as set by configure.
  32 #
  33 #  enable_threads       Either the name, yes or no depending on whether
  34 #                       threads support was requested.
  35 #
  36 #  default_use_cxa_atexit
  37 #                       "no" by default, can be set to "yes" if a target
  38 #                       wishes to use __cxa_atexit() by default if the
  39 #                       $enable___cxa_atexit variable is not set.
  40 #
  41 #  gas_flag             Either yes or no depending on whether GNU as was
  42 #                       requested.
  43 #
  44 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  45 #                       requested.
  46
  47 # This file sets the following shell variables for use by the
  48 # autoconf-generated configure script:
  49 #
  50 #  cpu_type             The name of the cpu, if different from the first
  51 #                       chunk of the canonical target name.
  52 #
  53 #  tm_defines           List of target macros to define for all compilations.
  54 #
  55 #  tm_file              A list of target macro files, if different from
  56 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  57 #                       per target in a way like this:
  58 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  59 #                       Note that the preferred order is:
  60 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  61 #                       - generic headers like dbxelf.h elfos.h, etc.
  62 #                       - specializing target headers like ${cpu_type.h}/elf.h
  63 #                       This helps to keep OS specific stuff out of the CPU
  64 #                       defining header ${cpu_type}/${cpu_type.h}.
  65 #
  66 #  tm_p_file            Location of file with declarations for functions
  67 #                       in $out_file.
  68 #
  69 #  out_file             The name of the machine description C support
  70 #                       file, if different from "$cpu_type/$cpu_type.c".
  71 #
  72 #  md_file              The name of the machine-description file, if
  73 #                       different from "$cpu_type/$cpu_type.md".
  74 #
  75 #  tmake_file           A list of machine-description-specific
  76 #                       makefile-fragments, if different from
  77 #                       "$cpu_type/t-$cpu_type".
  78 #
  79 #  extra_modes          The name of the file containing a list of extra
  80 #                       machine modes, if necessary and different from
  81 #                       "$cpu_type/$cpu_type-modes.def".
  82 #
  83 #  extra_objs           List of extra objects that should be linked into
  84 #                       the compiler proper (cc1, cc1obj, cc1plus)
  85 #                       depending on target.
  86 #
  87 #  extra_gcc_objs       List of extra objects that should be linked into
  88 #                       the compiler driver (gcc) depending on target.
  89 #
  90 #  extra_headers        List of used header files from the directory
  91 #                       config/${cpu_type}.
  92 #
  93 #  extra_passes         List of extra executables compiled for this target
  94 #                       machine, used for compiling from source to object.
  95 #
  96 #  extra_parts          List of extra object files that should be compiled
  97 #                       for this target machine.
  98 #
  99 #  extra_programs       Like extra_passes, but these are used when linking.
 100 #
 101 #  c_target_objs        List of extra target-dependent objects that be
 102 #                       linked into the C compiler only.
 103 #
 104 #  cxx_target_objs      List of extra target-dependent objects that be
 105 #                       linked into the C++ compiler only.
 106 #
 107 #  target_gtfiles       List of extra source files with type information.
 108 #
 109 #  xm_defines           List of macros to define when compiling for the
 110 #                       target machine.
 111 #
 112 #  xm_file              List of files to include when compiling for the
 113 #                       target machine.
 114 #
 115 #  use_collect2         Set to yes or no, depending on whether collect2
 116 #                       will be used.
 117 #
 118 #  target_cpu_default   Set to override the default target model.
 119 #
 120 #  gdb_needs_out_file_path
 121 #                       Set to yes if gdb needs a dir command with
 122 #                       `dirname $out_file`.
 123 #
 124 #  thread_file          Set to control which thread package to use.
 125 #
 126 #  gas                  Set to yes or no depending on whether the target
 127 #                       system normally uses GNU as.
 128 #
 129 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 130 #                       for this target.  This is true iff this target
 131 #                       supports "long" or "wchar_t" wider than 32 bits.
 132 #
 133 #  configure_default_options
 134 #                       Set to an initializer for configure_default_options
 135 #                       in configargs.h, based on --with-cpu et cetera.
 136 #
 137 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 138 #                       "no" if fixproto should never be run.
 139
 140 # The following variables are used in each case-construct to build up the
 141 # outgoing variables:
 142 #
 143 #  gnu_ld               Set to yes or no depending on whether the target
 144 #                       system normally uses GNU ld.
 145
 146 out_file=
 147 tmake_file=
 148 extra_headers=
 149 extra_passes=
 150 extra_parts=
 151 extra_programs=
 152 extra_objs=
 153 extra_gcc_objs=
 154 c_target_objs=
 155 cxx_target_objs=
 156 tm_defines=
 157 xm_defines=
 158 # Set this to force installation and use of collect2.
 159 use_collect2=
 160 # Set this to override the default target model.
 161 target_cpu_default=
 162 # Set this if gdb needs a dir command with `dirname $out_file`
 163 gdb_needs_out_file_path=
 164 # Set this to control which thread package will be used.
 165 thread_file=
 166 # Reinitialize these from the flag values every loop pass, since some
 167 # configure entries modify them.
 168 gas="$gas_flag"
 169 gnu_ld="$gnu_ld_flag"
 170 default_use_cxa_atexit=no
 171 target_gtfiles=
 172 need_64bit_hwint=
 173
 174 # Default to not using fixproto.  Targets which need fixproto should
 175 # specifically set this to 'yes'.
 176 use_fixproto=no
 177
 178 # Don't carry these over build->host->target.  Please.
 179 xm_file=
 180 md_file=
 181
 182 # Obsolete configurations.
 183 case ${target} in
 184  dummy*)
 185     if test "x$enable_obsolete" != xyes; then
 186       echo "*** Configuration ${target} is obsolete." >&2
 187       echo "*** Specify --enable-obsolete to build it anyway." >&2
 188       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 189       echo "*** unless a maintainer comes forward." >&2
 190       exit 1
 191     fi;;
 192 esac
 193
 194 # Unsupported targets list.  Do not put an entry in this list unless
 195 # it would otherwise be caught by a more permissive pattern.  The list
 196 # should be in alphabetical order.
 197 case ${target} in
 198    alpha*-*-linux*libc1*                \
 199  | i[34567]86-sequent-sysv              \
 200  | i[34567]86-sequent-sysv[123]*        \
 201  | i[34567]86-go32-*                    \
 202  | i[34567]86-*-go32*                   \
 203  | m68k-*-linux*aout*                   \
 204  | m68k-*-linux*libc1*                  \
 205  | mips64orion*-*-rtems*                \
 206  | powerpc-*-linux*libc1*               \
 207  | sparc-*-linux*aout*                  \
 208  | sparc-*-linux*libc1*                 \
 209  | sparc-hal-solaris2*                  \
 210  | thumb-*-*                            \
 211  | *-*-linux*coff*                      \
 212  | *-*-linux*oldld*                     \
 213  | *-*-rtemsaout*                       \
 214  | *-*-rtemscoff*                       \
 215  | vax-*-vms*                           \
 216  )
 217         echo "*** Configuration ${target} not supported" 1>&2
 218         exit 1
 219         ;;
 220 esac
 221
 222 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 223 # updated in each machine entry.  Also set default extra_headers for some
 224 # machines.
 225 tm_p_file=
 226 cpu_type=`echo ${target} | sed 's/-.*$//'`
 227 case ${target} in
 228 alpha*-*-*)
 229         cpu_type=alpha
 230         need_64bit_hwint=yes
 231         ;;
 232 am33_2.0-*-linux*)
 233         cpu_type=mn10300
 234         ;;
 235 strongarm*-*-*)
 236         cpu_type=arm
 237         ;;
 238 arm*-*-*)
 239         cpu_type=arm
 240         extra_headers="mmintrin.h"
 241         ;;
 242 ep9312*-*-*)
 243         cpu_type=arm
 244         ;;
 245 xscale-*-*)
 246         cpu_type=arm
 247         extra_headers="mmintrin.h"
 248         ;;
 249 i[34567]86-*-*)
 250         cpu_type=i386
 251         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 252         ;;
 253 x86_64-*-*)
 254         cpu_type=i386
 255         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 256         need_64bit_hwint=yes
 257         ;;
 258 ia64-*-*)
 259         extra_headers=ia64intrin.h
 260         need_64bit_hwint=yes
 261         ;;
 262 hppa*-*-* | parisc*-*-*)
 263         cpu_type=pa
 264         ;;
 265 m32r*-*-*)
 266         cpu_type=m32r
 267         ;;
 268 m680[012]0-*-*)
 269         cpu_type=m68k
 270         extra_headers=math-68881.h
 271         ;;
 272 m68k-*-*)
 273         extra_headers=math-68881.h
 274         ;;
 275 mips*-*-*)
 276         cpu_type=mips
 277         need_64bit_hwint=yes
 278         ;;
 279 powerpc*-*-*)
 280         cpu_type=rs6000
 281         extra_headers="ppc-asm.h altivec.h spe.h"
 282         need_64bit_hwint=yes
 283         ;;
 284 rs6000*-*-*)
 285         need_64bit_hwint=yes
 286         ;;
 287 sparc64*-*-*)
 288         cpu_type=sparc
 289         need_64bit_hwint=yes
 290         ;;
 291 sparc*-*-*)
 292         cpu_type=sparc
 293         ;;
 294 s390*-*-*)
 295         need_64bit_hwint=yes
 296         ;;
 297 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 298 sh[123456789lbe]*-*-*)
 299         cpu_type=sh
 300         need_64bit_hwint=yes
 301         ;;
 302 tic4x-*-*)
 303         cpu_type=c4x
 304         ;;
 305 esac
 306
 307 tm_file=${cpu_type}/${cpu_type}.h
 308 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 309 then
 310         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 311 fi
 312 extra_modes=
 313 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 314 then
 315         extra_modes=${cpu_type}/${cpu_type}-modes.def
 316 fi
 317
 318 case ${target} in
 319 x86_64-*-*)
 320         tm_file="i386/biarch64.h ${tm_file}"
 321         ;;
 322 esac
 323
 324 # On a.out targets, we need to use collect2.
 325 case ${target} in
 326 *-*-*aout*)
 327         use_collect2=yes
 328         ;;
 329 esac
 330
 331 # Common parts for widely ported systems.
 332 case ${target} in
 333 *-*-darwin*)
 334   case ${target} in
 335     *-darwin[0-6]*) ;;
 336     *) tm_file="${tm_file} darwin7.h" ;;
 337   esac
 338   tm_file="${tm_file} darwin.h"
 339   tm_p_file="${tm_p_file} darwin-protos.h"
 340   tmake_file="t-darwin t-slibgcc-darwin"
 341   target_gtfiles="\$(srcdir)/config/darwin.c"
 342   c_target_objs="darwin-c.o"
 343   cxx_target_objs="darwin-c.o"
 344   extra_parts="crt2.o"
 345   extra_objs="darwin.o"
 346   case ${enable_threads} in
 347     "" | yes | posix) thread_file='posix' ;;
 348   esac
 349   ;;
 350 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 351   # This is the place-holder for the generic a.out configuration
 352   # of FreeBSD.  No actual configuration resides here since
 353   # there was only ever a bare-bones ix86 configuration for
 354   # a.out and it exists solely in the machine-specific section.
 355   # This place-holder must exist to avoid dropping into
 356   # the generic ELF configuration of FreeBSD (i.e. it must be
 357   # ordered before that section).
 358   ;;
 359 *-*-freebsd*)
 360   # This is the generic ELF configuration of FreeBSD.  Later
 361   # machine-specific sections may refine and add to this
 362   # configuration.
 363   #
 364   # Due to tm_file entry ordering issues that vary between cpu
 365   # architectures, we only define fbsd_tm_file to allow the
 366   # machine-specific section to dictate the final order of all
 367   # entries of tm_file with the minor exception that components
 368   # of the tm_file set here will always be of the form:
 369   #
 370   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 371   #
 372   # The machine-specific section should not tamper with this
 373   # ordering but may order all other entries of tm_file as it
 374   # pleases around the provided core setting.
 375   gas=yes
 376   gnu_ld=yes
 377   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 378   case ${target} in
 379     *-*-freebsd3 | *-*-freebsd[3].*)
 380       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 381     *-*-freebsd4 | *-*-freebsd[4].*)
 382       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 383     *-*-freebsd5 | *-*-freebsd[5].*)
 384       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 385     *-*-freebsd6 | *-*-freebsd[6].*)
 386       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 387     *)
 388       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 389       exit 1
 390       ;;
 391   esac
 392   tmake_file="t-slibgcc-elf-ver t-freebsd"
 393   case ${enable_threads} in
 394     no)
 395       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 396       ;;
 397     "" | yes | posix)
 398       thread_file='posix'
 399       tmake_file="${tmake_file} t-freebsd-thread"
 400       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 401       # when "optionally" threaded via weak pthread_* checks.
 402       case ${target} in
 403         *-*-freebsd[34] | *-*-freebsd[34].*)
 404           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 405           ;;
 406       esac
 407       ;;
 408     *)
 409       echo 'Unknown thread configuration for FreeBSD'
 410       exit 1
 411       ;;
 412   esac
 413   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 414   ;;
 415 *-*-linux*libc1* | *-*-linux*aout*)
 416   # Avoid the generic linux case.
 417   ;;
 418 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 419   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 420   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 421   gas=yes
 422   gnu_ld=yes
 423   case ${enable_threads} in
 424     "" | yes | posix) thread_file='posix' ;;
 425   esac
 426   tmake_file="t-slibgcc-elf-ver t-linux"
 427   ;;
 428 *-*-gnu*)
 429   # On the Hurd, the setup is just about the same on
 430   # each different CPU.  The specific machines that we
 431   # support are matched above and just set $cpu_type.
 432   tm_file="${cpu_type}/gnu.h"
 433   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 434   # GNU tools are the only tools.
 435   gas=yes
 436   gnu_ld=yes
 437   # These details are the same as for Linux.
 438   # But here we need a little extra magic.
 439   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 440   case ${target} in
 441     alpha*)
 442       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 443       ;;
 444     i[34567]86-*-*)
 445       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 446       ;;
 447   esac
 448   ;;
 449 *-*-netbsd*)
 450   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 451   gas=yes
 452   gnu_ld=yes
 453
 454   # NetBSD 2.0 and later get POSIX threads enabled by default.
 455   # Allow them to be explicitly enabled on any other version.
 456   case ${enable_threads} in
 457     "")
 458       case ${target} in
 459         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 460           thread_file='posix'
 461           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 462           ;;
 463       esac
 464       ;;
 465     yes | posix)
 466       thread_file='posix'
 467       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 468       ;;
 469   esac
 470
 471   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 472   # ELF configurations.  We will clear extra_parts in the
 473   # a.out configurations.
 474   case ${target} in
 475     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 476       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 477       ;;
 478   esac
 479
 480   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 481   # default (unless overridden by --disable-__cxa_atexit).
 482   case ${target} in
 483     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 484       default_use_cxa_atexit=yes
 485       ;;
 486   esac
 487   ;;
 488 *-*-openbsd*)
 489   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 490   case ${enable_threads} in
 491     yes)
 492       thread_file='posix'
 493       tmake_file="${tmake_file} t-openbsd-thread"
 494       ;;
 495   esac
 496   ;;
 497 *-*-rtems*)
 498   case ${enable_threads} in
 499     yes) thread_file='rtems' ;;
 500   esac
 501   ;;
 502 *-*-vxworks*)
 503   tmake_file=t-vxworks
 504   tm_file="${tm_file} elfos.h svr4.h vxworks.h"
 505   case ${enable_threads} in
 506     no) ;;
 507     "" | yes | vxworks) thread_file='vxworks' ;;
 508     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 509   esac
 510   use_collect2=yes
 511   xm_defines=POSIX
 512   ;;
 513 esac
 514
 515 case ${target} in
 516 # Support site-specific machine types.
 517 *local*)
 518         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 519         tm_file=${cpu_type}/$rest.h
 520         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 521         then xm_file=${cpu_type}/xm-$rest.h
 522         fi
 523         if test -f $srcdir/config/${cpu_type}/t-$rest
 524         then tmake_file=${cpu_type}/t-$rest
 525         fi
 526         ;;
 527 alpha*-*-unicosmk*)
 528         use_collect2=yes
 529         tm_file="${tm_file} alpha/unicosmk.h"
 530
 531         # Don't include t-ieee for now because we don't support that yet
 532         # tmake_file="alpha/t-ieee"
 533         tmake_file="alpha/t-unicosmk"
 534         use_fixproto=yes
 535         ;;
 536 alpha*-*-linux*)
 537         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 538         target_cpu_default="MASK_GAS"
 539         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 540         ;;
 541 alpha*-*-gnu*)
 542         target_cpu_default="MASK_GAS"
 543         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 544         ;;
 545 alpha*-*-freebsd*)
 546         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 547         target_cpu_default="MASK_GAS"
 548         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 549         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 550         ;;
 551 alpha*-*-netbsd*)
 552         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 553         target_cpu_default="MASK_GAS"
 554         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 555         ;;
 556 alpha*-*-openbsd*)
 557         tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 558         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 559         # default x-alpha is only appropriate for dec-osf.
 560         target_cpu_default="MASK_GAS"
 561         tmake_file="alpha/t-alpha alpha/t-ieee"
 562         ;;
 563 alpha*-dec-osf[45]*)
 564         if test x$stabs = xyes
 565         then
 566                 tm_file="${tm_file} dbx.h"
 567         fi
 568         if test x$gas != xyes
 569         then
 570                 extra_passes="mips-tfile mips-tdump"
 571         fi
 572         use_collect2=yes
 573         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 574         tm_file="${tm_file} alpha/osf.h"
 575         extra_headers=va_list.h
 576         case ${target} in
 577           *-*-osf4*)
 578             # Set target_cpu_default except on 4.0a.
 579             case ${target} in
 580                 *-*-osf4.0a) ;;
 581                 *) target_cpu_default=MASK_SUPPORT_ARCH
 582             esac
 583             ;;
 584           *-*-osf5*)
 585             tm_file="${tm_file} alpha/osf5.h"
 586             target_cpu_default=MASK_SUPPORT_ARCH
 587             ;;
 588         esac
 589         case ${enable_threads} in
 590           "" | yes | posix)
 591             thread_file='posix'
 592             tmake_file="${tmake_file} alpha/t-osf-pthread"
 593             ;;
 594         esac
 595         ;;
 596 alpha64-dec-*vms*)
 597         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 598         xm_file="alpha/xm-vms.h"
 599         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 600         prefix=/gnu
 601         local_prefix=/gnu
 602         ;;
 603 alpha*-dec-*vms*)
 604         tm_file="${tm_file} alpha/vms.h"
 605         xm_file=alpha/xm-vms.h
 606         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 607         prefix=/gnu
 608         local_prefix=/gnu
 609         ;;
 610 arc-*-elf*)
 611         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 612         extra_parts="crtinit.o crtfini.o"
 613         use_fixproto=yes
 614         ;;
 615 arm-*-coff* | armel-*-coff*)
 616         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 617         tmake_file="arm/t-arm arm/t-arm-coff"
 618         ;;
 619 arm-semi-aof | armel-semi-aof)
 620         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 621         tmake_file="arm/t-arm arm/t-semi"
 622         ;;
 623 arm-wrs-vxworks)
 624         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
 625         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 626         ;;
 627 arm*-*-freebsd*|strongarm*-*-freebsd*)
 628         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 629         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 630         ;;
 631 arm*-*-netbsdelf*)
 632         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 633         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 634         ;;
 635 arm*-*-netbsd*)
 636         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 637         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 638         extra_parts=""
 639         use_collect2=yes
 640         ;;
 641 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 642         tm_file="dbxelf.h elfos.h linux.h arm/elf.h  arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
 643         tmake_file="${tmake_file} arm/t-arm arm/t-linux"
 644         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
 645         gnu_ld=yes
 646         ;;
 647 arm*-*-uclinux*)                # ARM ucLinux
 648         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
 649         tmake_file="arm/t-arm arm/t-arm-elf"
 650         ;;
 651 arm*-*-ecos-elf)
 652         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 653         tmake_file="arm/t-arm arm/t-arm-elf"
 654         ;;
 655 arm*-*-eabi* | arm*-*-symbianelf* )
 656         # The BPABI long long divmod functions return a 128-bit value in
 657         # registers r0-r3.  Correctly modeling that requires the use of
 658         # TImode.
 659         need_64bit_hwint=yes
 660         default_use_cxa_atexit=yes
 661         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 662         tmake_file="arm/t-arm arm/t-arm-elf"
 663         case ${target} in
 664         arm*-*-eabi*)
 665           tmake_file="${tmake_file} arm/t-bpabi"
 666           ;;
 667         arm*-*-symbianelf*)
 668           tm_file="${tm_file} arm/symbian.h"
 669           # We do not include t-bpabi for Symbian OS because the system
 670           # provides its own implementation of the BPABI functions.
 671           tmake_file="${tmake_file} t-slibgcc-elf-ver arm/t-symbian"
 672           ;;
 673         esac
 674         tm_file="${tm_file} arm/aout.h arm/arm.h"
 675         ;;
 676 arm*-*-rtems*)
 677         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 678         tmake_file="arm/t-arm arm/t-arm-elf t-rtems"
 679         ;;
 680 arm*-*-elf | ep9312-*-elf)
 681         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 682         tmake_file="arm/t-arm arm/t-arm-elf"
 683         ;;
 684 arm*-wince-pe*)
 685         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 686         tmake_file="arm/t-arm arm/t-wince-pe"
 687         extra_objs="pe.o"
 688         ;;
 689 arm-*-pe*)
 690         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 691         tmake_file="arm/t-arm arm/t-pe"
 692         extra_objs="pe.o"
 693         ;;
 694 arm*-*-kaos*)
 695         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 696         tmake_file="arm/t-arm arm/t-arm-elf"
 697         ;;
 698 avr-*-*)
 699         tm_file="avr/avr.h dbxelf.h"
 700         use_fixproto=yes
 701         ;;
 702 c4x-*-rtems* | tic4x-*-rtems*)
 703         tmake_file="c4x/t-c4x t-rtems"
 704         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 705         c_target_objs="c4x-c.o"
 706         cxx_target_objs="c4x-c.o"
 707         ;;
 708 c4x-* | tic4x-*)
 709         tmake_file=c4x/t-c4x
 710         c_target_objs="c4x-c.o"
 711         cxx_target_objs="c4x-c.o"
 712         ;;
 713 cris-*-aout)
 714         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 715         gas=yes
 716         tmake_file="cris/t-cris cris/t-aout"
 717         ;;
 718 cris-*-elf | cris-*-none)
 719         tm_file="dbxelf.h elfos.h ${tm_file}"
 720         tmake_file="cris/t-cris cris/t-elfmulti"
 721         gas=yes
 722         ;;
 723 cris-*-linux*)
 724         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 725         # We need to avoid using t-linux, so override default tmake_file
 726         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 727         ;;
 728 fr30-*-elf)
 729         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 730         tmake_file=fr30/t-fr30
 731         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 732         use_fixproto=yes
 733         ;;
 734 frv-*-elf)
 735         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 736         tmake_file=frv/t-frv
 737         use_fixproto=yes
 738         ;;
 739 frv-*-*linux*)
 740         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 741                  linux.h frv/linux.h frv/frv-abi.h"
 742         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 743         ;;
 744 h8300-*-rtems*)
 745         tmake_file="h8300/t-h8300 t-rtems"
 746         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 747         ;;
 748 h8300-*-elf*)
 749         tmake_file="h8300/t-h8300 h8300/t-elf"
 750         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 751         use_fixproto=yes
 752         ;;
 753 h8300-*-*)
 754         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 755         use_fixproto=yes
 756         ;;
 757 hppa*64*-*-linux* | parisc*64*-*-linux*)
 758         target_cpu_default="MASK_PA_11|MASK_PA_20"
 759         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 760                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 761         tmake_file="${tmake_file} pa/t-linux64"
 762         gas=yes gnu_ld=yes
 763         need_64bit_hwint=yes
 764         ;;
 765 hppa*-*-linux* | parisc*-*-linux*)
 766         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 767         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 768                  pa/pa32-regs.h pa/pa32-linux.h"
 769         tmake_file="${tmake_file} pa/t-linux"
 770         # if not configured with --enable-sjlj-exceptions, bump the
 771         # libgcc version number
 772         if test x$sjlj != x1; then
 773             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
 774         fi
 775         ;;
 776 # port not yet contributed.
 777 #hppa*-*-openbsd*)
 778 #       target_cpu_default="MASK_PA_11"
 779 #       ;;
 780 hppa1.1-*-pro*)
 781         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 782         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 783                  pa/pa-pro-end.h libgloss.h"
 784         tmake_file="pa/t-pro"
 785         ;;
 786 hppa1.1-*-osf*)
 787         target_cpu_default="MASK_PA_11"
 788         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 789         tmake_file="pa/t-pa"
 790         use_collect2=yes
 791         ;;
 792 hppa1.1-*-rtems*)
 793         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 794         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 795                  pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
 796         tmake_file="pa/t-pro t-rtems"
 797         ;;
 798 hppa1.1-*-bsd*)
 799         target_cpu_default="MASK_PA_11"
 800         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 801         tmake_file="pa/t-pa"
 802         use_collect2=yes
 803         ;;
 804 hppa[12]*-*-hpux10*)
 805         case ${target} in
 806         hppa1.1-*-* | hppa2*-*-*)
 807                 target_cpu_default="MASK_PA_11"
 808                 ;;
 809         esac
 810         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 811                  pa/pa-hpux.h pa/pa-hpux10.h"
 812         case ${target} in
 813         *-*-hpux10.[1-9]*)
 814                 tm_file="${tm_file} pa/pa-hpux1010.h"
 815                 ;;
 816         esac
 817         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
 818         case ${enable_threads} in
 819           "")
 820             if test x$have_pthread_h = xyes ; then
 821               tmake_file="${tmake_file} pa/t-dce-thr"
 822             fi
 823             ;;
 824           yes | dce)
 825             tmake_file="${tmake_file} pa/t-dce-thr"
 826             ;;
 827         esac
 828         use_collect2=yes
 829         use_fixproto=yes
 830         ;;
 831 hppa*64*-*-hpux11*)
 832         target_cpu_default="MASK_PA_11|MASK_PA_20"
 833         if test x$gnu_ld = xyes
 834         then
 835                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 836         fi
 837         if test x$gas = xyes
 838         then
 839                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 840                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux11.h"
 841         else
 842                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
 843                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux11.h"
 844         fi
 845         case ${target} in
 846         *-*-hpux11.11)
 847                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 848                 ;;
 849         *)
 850                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 851                 ;;
 852         esac
 853         need_64bit_hwint=yes
 854         tmake_file="pa/t-pa64 pa/t-pa-hpux"
 855         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 856         case x${enable_threads} in
 857         xyes | xposix )
 858                 thread_file=posix
 859                 ;;
 860         esac
 861         ;;
 862 hppa[12]*-*-hpux11*)
 863         case ${target} in
 864         hppa1.1-*-* | hppa2*-*-*)
 865                 target_cpu_default="MASK_PA_11"
 866                 ;;
 867         esac
 868         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 869                  pa/pa-hpux.h pa/pa-hpux11.h"
 870         case ${target} in
 871         *-*-hpux11.[1-9]*)
 872                 tm_file="${tm_file} pa/pa-hpux1111.h"
 873                 ;;
 874         esac
 875         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
 876         case x${enable_threads} in
 877         xyes | xposix )
 878                 thread_file=posix
 879                 ;;
 880         esac
 881         use_collect2=yes
 882         ;;
 883 i[34567]86-*-darwin*)
 884         tm_file="${tm_file} i386/darwin.h"
 885         ;;
 886 i[34567]86-*-elf*)
 887         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
 888         tmake_file="i386/t-i386elf t-svr4"
 889         use_fixproto=yes
 890         ;;
 891 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
 892         if test x$gas = xyes
 893         then
 894                 tm_file="${tm_file} usegas.h"
 895         fi
 896         xm_defines="SMALL_ARG_MAX"
 897         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
 898         tmake_file=t-svr4
 899         extra_parts="crtbegin.o crtend.o"
 900         use_fixproto=yes
 901         ;;
 902 i[34567]86-*-aout*)
 903         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
 904         use_fixproto=yes
 905         ;;
 906 i[34567]86-*-beoself* | i[34567]86-*-beos*)
 907         tmake_file='i386/t-beos i386/t-crtpic'
 908         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
 909         extra_parts='crtbegin.o crtend.o'
 910         ;;
 911 i[34567]86-*-freebsd*)
 912         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
 913         ;;
 914 x86_64-*-freebsd*)
 915         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
 916         ;;
 917 i[34567]86-*-netbsdelf*)
 918         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
 919         ;;
 920 i[34567]86-*-netbsd*)
 921         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
 922         tmake_file=t-netbsd
 923         extra_parts=""
 924         use_collect2=yes
 925         ;;
 926 x86_64-*-netbsd*)
 927         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
 928         ;;
 929 i[34567]86-*-openbsd*)
 930         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
 931         # needed to unconfuse gdb
 932         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
 933         # we need collect2 until our bug is fixed...
 934         use_collect2=yes
 935         ;;
 936 i[34567]86-*-coff*)
 937         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
 938         use_fixproto=yes
 939         ;;
 940 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
 941                         # Intel 80386's running GNU/*
 942                         # with ELF format using glibc 2
 943         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
 944         case ${target} in
 945         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
 946         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
 947         esac
 948         tmake_file="${tmake_file} i386/t-crtstuff"
 949         ;;
 950 x86_64-*-linux*)
 951         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
 952                  i386/x86-64.h i386/linux64.h"
 953         tmake_file="${tmake_file} i386/t-linux64"
 954         ;;
 955 i[34567]86-*-gnu*)
 956         ;;
 957 i[34567]86-pc-msdosdjgpp*)
 958         xm_file=i386/xm-djgpp.h
 959         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
 960         tmake_file=i386/t-djgpp
 961         gnu_ld=yes
 962         gas=yes
 963         ;;
 964 i[34567]86-*-lynxos*)
 965         xm_defines=POSIX
 966         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
 967         tmake_file="i386/t-crtstuff t-lynx"
 968         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
 969         thread_file=lynx
 970         gnu_ld=yes
 971         gas=yes
 972         ;;
 973 i[3456x]86-*-netware*)
 974         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
 975         tmake_file=i386/t-netware
 976         extra_objs=netware.o
 977         case /${with_ld} in
 978         */nwld)
 979                 extra_objs="$extra_objs nwld.o"
 980                 tm_file="${tm_file} i386/nwld.h"
 981                 tmake_file="${tmake_file} i386/t-nwld"
 982                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
 983                 ;;
 984         esac
 985         case x${enable_threads} in
 986         x | xyes | xposix) thread_file='posix';;
 987         xnks) thread_file='nks';;
 988         xno) ;;
 989         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
 990         esac
 991         ;;
 992 i[34567]86-*-nto-qnx*)
 993         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
 994         tmake_file=i386/t-nto
 995         gnu_ld=yes
 996         gas=yes
 997         ;;
 998 i[34567]86-*-rtems*)
 999         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1000         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1001         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1002         ;;
1003 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1004         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1005         if test x$gas = xyes
1006         then
1007                 tm_file="usegas.h ${tm_file}"
1008         fi
1009         tmake_file=i386/t-sco5
1010         extra_parts="crtbegin.o crtend.o"
1011         use_fixproto=yes
1012         ;;
1013 i[34567]86-*-solaris2*)
1014         xm_defines="SMALL_ARG_MAX"
1015         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h"
1016         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1017         c_target_objs="sol2-c.o"
1018         cxx_target_objs="sol2-c.o"
1019         extra_objs="sol2.o"
1020         tm_p_file="${tm_p_file} sol2-protos.h"
1021         if test x$gnu_ld = xyes; then
1022                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1023         else
1024                 tmake_file="$tmake_file t-slibgcc-sld"
1025         fi
1026         case ${target} in
1027         *-*-solaris2.[789] | *-*-solaris2.1[0-9])
1028                 tm_file="$tm_file tm-dwarf2.h"
1029                 ;;
1030         esac
1031         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1032         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1033           no:*:*) ;;
1034           *:yes:* ) thread_file=posix ;;
1035           yes:*:* | *:*:yes ) thread_file=solaris ;;
1036         esac
1037         ;;
1038 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1039        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1040        if test x$stabs = xyes
1041        then
1042                tm_file="${tm_file} dbx.h"
1043        fi
1044        tmake_file="i386/t-crtpic t-svr4"
1045        extra_parts="crtbegin.o crtend.o"
1046        if test x$enable_threads = xyes; then
1047                thread_file='posix'
1048        fi
1049         use_fixproto=yes
1050        ;;
1051 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1052         xm_defines="SMALL_ARG_MAX"
1053         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1054         if test x$stabs = xyes
1055         then
1056                 tm_file="${tm_file} dbx.h"
1057         fi
1058         tmake_file="i386/t-crtpic t-svr4"
1059         extra_parts="crtbegin.o crtend.o"
1060         use_fixproto=yes
1061         ;;
1062 i[4567]86-wrs-vxworks)
1063         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
1064         tmake_file="${tmake_file} i386/t-vxworks"
1065         ;;
1066 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1067         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1068         xm_file=i386/xm-cygwin.h
1069         tmake_file="i386/t-cygwin i386/t-cygming"
1070         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1071         extra_objs=winnt.o
1072         c_target_objs=cygwin2.o
1073         cxx_target_objs=cygwin2.o
1074         extra_gcc_objs=cygwin1.o
1075         if test x$enable_threads = xyes; then
1076                 thread_file='posix'
1077         fi
1078         ;;
1079 i[34567]86-*-mingw32*)
1080         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1081         xm_file=i386/xm-mingw32.h
1082         tmake_file="i386/t-cygming i386/t-mingw32"
1083         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1084         extra_objs=winnt.o
1085         case ${enable_threads} in
1086           "" | yes | win32) thread_file='win32' ;;
1087         esac
1088         case ${target} in
1089                 *mingw32crt*)
1090                         tm_file="${tm_file} i386/crtdll.h"
1091                         ;;
1092                 *mingw32msv* | *mingw32*)
1093                         ;;
1094         esac
1095         ;;
1096 i[34567]86-*-uwin*)
1097         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1098         tmake_file="i386/t-cygwin i386/t-uwin"
1099         extra_objs=winnt.o
1100         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1101         if test x$enable_threads = xyes; then
1102                 thread_file='win32'
1103         fi
1104         use_fixproto=yes
1105         ;;
1106 i[34567]86-*-interix3*)
1107         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1108         tmake_file="i386/t-interix"
1109         extra_objs=winnt.o
1110         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1111         if test x$enable_threads = xyes ; then
1112                 thread_file='posix'
1113         fi
1114         if test x$stabs = xyes ; then
1115                 tm_file="${tm_file} dbxcoff.h"
1116         fi
1117         ;;
1118 i[34567]86-*-kaos*)
1119         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1120         tmake_file="i386/t-i386elf t-svr4"
1121         ;;
1122 i860-*-sysv4*)
1123         tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h"
1124         tmake_file="i860/t-i860 i860/t-svr4"
1125         extra_parts="crtbegin.o crtend.o"
1126         use_fixproto=yes
1127         ;;
1128 ia64*-*-elf*)
1129         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1130         tmake_file="ia64/t-ia64"
1131         target_cpu_default="0"
1132         if test x$gas = xyes
1133         then
1134                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1135         fi
1136         if test x$gnu_ld = xyes
1137         then
1138                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1139         fi
1140         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1141         use_fixproto=yes
1142         ;;
1143 ia64*-*-freebsd*)
1144         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1145         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1146         tmake_file="${tmake_file} ia64/t-ia64"
1147         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1148         ;;
1149 ia64*-*-linux*)
1150         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1151         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1152         if test x$with_system_libunwind != xyes ; then
1153                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1154         fi
1155         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1156         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1157         ;;
1158 ia64*-*-hpux*)
1159         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1160         tmake_file="ia64/t-ia64 ia64/t-hpux"
1161         target_cpu_default="MASK_GNU_AS"
1162         case x$enable_threads in
1163         xyes | xposix )
1164                 thread_file=posix
1165                 ;;
1166         esac
1167         use_collect2=no
1168         c_target_objs="ia64-c.o"
1169         cxx_target_objs="ia64-c.o"
1170         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1171         # in ia64/t-hpux, and also fix the definition of putenv in
1172         # sys-protos.h (const char not char).
1173         ;;
1174 ip2k-*-elf)
1175         tm_file="elfos.h ${tm_file}"
1176         use_fixproto=yes
1177         ;;
1178 iq2000*-*-elf*)
1179         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1180         tmake_file=iq2000/t-iq2000
1181         out_file=iq2000/iq2000.c
1182         md_file=iq2000/iq2000.md
1183         use_fixproto=yes
1184         ;;
1185 m32r-*-elf*)
1186         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1187         extra_parts="crtinit.o crtfini.o"
1188         use_fixproto=yes
1189         ;;
1190 m32rle-*-elf*)
1191         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1192         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1193         use_fixproto=yes
1194         ;;
1195 m32r-*-linux*)
1196         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1197         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1198         # We override the tmake_file for linux -- why?
1199         tmake_file="m32r/t-linux"
1200         gnu_ld=yes
1201         use_fixproto=yes
1202         if test x$enable_threads = xyes; then
1203                 thread_file='posix'
1204         fi
1205         ;;
1206 m32rle-*-linux*)
1207         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1208         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1209         # We override the tmake_file for linux -- why?
1210         tmake_file="m32r/t-linux"
1211         gnu_ld=yes
1212         use_fixproto=yes
1213         if test x$enable_threads = xyes; then
1214                 thread_file='posix'
1215         fi
1216         ;;
1217 # m68hc11 and m68hc12 share the same machine description.
1218 m68hc11-*-*|m6811-*-*)
1219         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1220         tm_p_file="m68hc11/m68hc11-protos.h"
1221         md_file="m68hc11/m68hc11.md"
1222         out_file="m68hc11/m68hc11.c"
1223         tmake_file="m68hc11/t-m68hc11-gas"
1224         use_fixproto=yes
1225         ;;
1226 m68hc12-*-*|m6812-*-*)
1227         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1228         tm_p_file="m68hc11/m68hc11-protos.h"
1229         md_file="m68hc11/m68hc11.md"
1230         out_file="m68hc11/m68hc11.c"
1231         tmake_file="m68hc11/t-m68hc11-gas"
1232         use_fixproto=yes
1233         ;;
1234 m68k-*-aout*)
1235         tmake_file=m68k/t-m68kbare
1236         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1237         ;;
1238 m68k-*-coff*)
1239         tmake_file=m68k/t-m68kbare
1240         tm_defines="MOTOROLA USE_GAS"
1241         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1242         use_fixproto=yes
1243         ;;
1244 m68020-*-elf* | m68k-*-elf*)
1245         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1246         tm_defines="MOTOROLA USE_GAS"
1247         tmake_file=m68k/t-m68kelf
1248         extra_parts="crtbegin.o crtend.o"
1249         use_fixproto=yes
1250         ;;
1251 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1252         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1253         tm_defines="MOTOROLA USE_GAS"
1254         case ${target} in
1255         m68010*)
1256                 target_cpu_default="0"
1257                 ;;
1258         *)
1259                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1260                 ;;
1261         esac
1262         ;;
1263 m68k*-*-openbsd*)
1264         # needed to unconfuse gdb
1265         tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1266         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1267         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1268         # we need collect2 until our bug is fixed...
1269         use_collect2=yes
1270         ;;
1271 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1272         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1273         tm_defines="MOTOROLA USE_GAS"
1274         tmake_file=m68k/t-uclinux
1275         use_fixproto=no
1276         ;;
1277 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1278                                 # with ELF format using glibc 2
1279                                 # aka the GNU/Linux C library 6.
1280         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1281         tm_defines="MOTOROLA USE_GAS"
1282         # if not configured with --enable-sjlj-exceptions, bump the
1283         # libgcc version number
1284         if test x$sjlj != x1; then
1285             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1286         fi
1287         ;;
1288 m68k-*-rtems*)
1289         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1290         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1291         tm_defines="MOTOROLA USE_GAS"
1292         extra_parts="crtbegin.o crtend.o"
1293         ;;
1294 mcore-*-elf)
1295         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1296         tmake_file=mcore/t-mcore
1297         use_fixproto=yes
1298         ;;
1299 mcore-*-pe*)
1300         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1301         tmake_file=mcore/t-mcore-pe
1302         use_fixproto=yes
1303         ;;
1304 mips-sgi-irix[56]*)
1305         tm_file="elfos.h ${tm_file} mips/iris.h"
1306         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1307         target_cpu_default="MASK_ABICALLS"
1308         case ${target} in
1309         *-*-irix5*)
1310                 tm_file="${tm_file} mips/iris5.h"
1311                 ;;
1312
1313         *-*-irix6*)
1314                 tm_file="${tm_file} mips/iris6.h"
1315                 tmake_file="${tmake_file} mips/t-iris6"
1316                 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1317                 ;;
1318         esac
1319         if test "x$stabs" = xyes
1320         then
1321                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1322         fi
1323         if test "x$gnu_ld" = xyes
1324         then
1325                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1326         fi
1327 #       if test x$enable_threads = xyes; then
1328 #               thread_file='irix'
1329 #       fi
1330         use_fixproto=yes
1331         ;;
1332 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1333         target_cpu_default="MASK_ABICALLS"
1334         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1335         ;;
1336 mips64*-*-linux*)
1337         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1338         tmake_file="${tmake_file} mips/t-linux64"
1339
1340         # This default ABI is a partial lie: t-linux64 overrides the
1341         # DRIVER_SELF_SPEC that sets the default abi, in the spec file
1342         # that is installed.  What GCC thinks of as the default must
1343         # remain as ABI_32 such that the SONAMEs of the libgcc shared
1344         # libraries remain compatible with those of mips-linux-gnu.
1345         tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32"
1346         target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
1347         extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
1348         gnu_ld=yes
1349         gas=yes
1350         ;;
1351 mips*-*-linux*)                         # Linux MIPS, either endian.
1352         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1353         case ${target} in
1354         mipsisa32*-*)
1355                 target_cpu_default="MASK_SOFT_FLOAT"
1356                 tm_defines="MIPS_ISA_DEFAULT=32"
1357                 ;;
1358         esac
1359         ;;
1360 mips*-*-openbsd*)
1361         tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1362         target_cpu_default="MASK_ABICALLS"
1363         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1364         case ${target} in
1365         mips*el-*-openbsd*)
1366             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1367         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1368         esac
1369         ;;
1370 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1371         tm_file="elfos.h ${tm_file} mips/elf.h"
1372         tmake_file=mips/t-isa3264
1373         tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1374         use_fixproto=yes
1375         ;;
1376 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1377         tm_file="elfos.h ${tm_file} mips/elf.h"
1378         tmake_file=mips/t-isa3264
1379         tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1380         use_fixproto=yes
1381         ;;
1382 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1383         tm_file="elfos.h ${tm_file} mips/elf.h"
1384         tmake_file=mips/t-isa3264
1385         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1386         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1387         use_fixproto=yes
1388         ;;
1389 mipsisa64sr71k-*-elf*)
1390         tm_file="elfos.h ${tm_file} mips/elf.h"
1391         tmake_file=mips/t-sr71k
1392         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1393         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1394         use_fixproto=yes
1395         ;;
1396 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1397         tm_file="elfos.h ${tm_file} mips/elf.h"
1398         tmake_file=mips/t-elf
1399         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1400         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1401         use_fixproto=yes
1402         ;;
1403 mips-*-elf* | mipsel-*-elf*)
1404         tm_file="elfos.h ${tm_file} mips/elf.h"
1405         tmake_file=mips/t-elf
1406         use_fixproto=yes
1407         ;;
1408 mips64-*-elf* | mips64el-*-elf*)
1409         tm_file="elfos.h ${tm_file} mips/elf.h"
1410         tmake_file=mips/t-elf
1411         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1412         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1413         use_fixproto=yes
1414         ;;
1415 mips64vr-*-elf* | mips64vrel-*-elf*)
1416         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1417         tmake_file=mips/t-vr
1418         use_fixproto=yes
1419         ;;
1420 mips64orion-*-elf* | mips64orionel-*-elf*)
1421         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1422         tmake_file=mips/t-elf
1423         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1424         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1425         use_fixproto=yes
1426         ;;
1427 mips*-*-rtems*)
1428         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1429         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1430         ;;
1431 mips-wrs-vxworks)
1432         # We want vxworks.h after mips/elf.h, which unfortunately means we
1433         # have to redo the tm_file list from scratch.
1434         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1435         tmake_file="${tmake_file} mips/t-vxworks"
1436         ;;
1437 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1438         xm_defines=POSIX
1439         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1440         tmake_file="${tmake_file} mips/t-elf"
1441         thread_file=
1442         ;;
1443 mipstx39-*-elf* | mipstx39el-*-elf*)
1444         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1445         tmake_file=mips/t-r3900
1446         use_fixproto=yes
1447         ;;
1448 mmix-knuth-mmixware)
1449         need_64bit_hwint=yes
1450         ;;
1451 mn10300-*-*)
1452         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1453         if test x$stabs = xyes
1454         then
1455                 tm_file="${tm_file} dbx.h"
1456         fi
1457         use_collect2=no
1458         use_fixproto=yes
1459         ;;
1460 ns32k-*-netbsdelf*)
1461         echo "GCC does not yet support the ${target} target"; exit 1
1462         ;;
1463 ns32k-*-netbsd*)
1464         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1465         # On NetBSD, the headers are already okay, except for math.h.
1466         tmake_file="t-netbsd ns32k/t-ns32k"
1467         extra_parts=""
1468         use_collect2=yes
1469         ;;
1470 pdp11-*-bsd)
1471         tm_file="${tm_file} pdp11/2bsd.h"
1472         use_fixproto=yes
1473         ;;
1474 pdp11-*-*)
1475         use_fixproto=yes
1476         ;;
1477 avr-*-*)
1478         use_fixproto=yes
1479         ;;
1480 # port not yet contributed
1481 #powerpc-*-openbsd*)
1482 #       tmake_file="${tmake_file} rs6000/t-fprules "
1483 #       extra_headers=
1484 #       ;;
1485 powerpc64-*-linux*)
1486         tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1487         case x$with_cpu in
1488         x|xpowerpc64|xdefault64) tm_file="${tm_file} rs6000/default64.h";;
1489         esac
1490         tm_file="${tm_file} rs6000/linux64.h"
1491         tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1492         ;;
1493 powerpc64-*-gnu*)
1494         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1495         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1496         ;;
1497 powerpc-*-beos*)
1498         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1499         tmake_file="rs6000/t-fprules rs6000/t-beos"
1500         extra_headers=
1501         use_fixproto=yes
1502         ;;
1503 powerpc-*-darwin*)
1504         tm_file="${tm_file} rs6000/darwin.h"
1505         tmake_file="${tmake_file} rs6000/t-darwin"
1506         extra_headers=altivec.h
1507         ;;
1508 powerpc*-*-freebsd*)
1509         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1510         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1511         ;;
1512 powerpc-*-netbsd*)
1513         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1514         tmake_file="${tmake_file} rs6000/t-netbsd"
1515         ;;
1516 powerpc-*-chorusos*)
1517         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1518         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1519         case ${enable_threads} in
1520           yes | posix)
1521             thread_file='posix'
1522             ;;
1523         esac
1524         use_fixproto=yes
1525         ;;
1526 powerpc-*-eabispe*)
1527         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1528         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1529         ;;
1530 powerpc-*-eabisimaltivec*)
1531         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1532         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1533         ;;
1534 powerpc-*-eabisim*)
1535         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1536         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1537         ;;
1538 powerpc-*-elf*)
1539         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1540         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1541         use_fixproto=yes
1542         ;;
1543 powerpc-*-eabialtivec*)
1544         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1545         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1546         ;;
1547 powerpc-*-eabi*)
1548         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1549         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1550         ;;
1551 powerpc-*-rtems*)
1552         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1553         tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1554         ;;
1555 powerpc-*-linux*altivec*)
1556         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1557         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1558         ;;
1559 powerpc-*-linux*spe*)
1560         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1561         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1562         ;;
1563 powerpc-*-linux*)
1564         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
1565         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1566         ;;
1567 powerpc-*-gnu-gnualtivec*)
1568         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1569         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1570         if test x$enable_threads = xyes; then
1571                 thread_file='posix'
1572         fi
1573         ;;
1574 powerpc-*-gnu*)
1575         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1576         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1577         if test x$enable_threads = xyes; then
1578                 thread_file='posix'
1579         fi
1580         ;;
1581 powerpc-wrs-vxworks*)
1582         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1583         # means we have to redo the tm_file list from scratch.
1584         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1585         tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
1586         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1587         extra_headers=ppc-asm.h
1588         ;;
1589 powerpc-wrs-windiss*)   # Instruction-level simulator for VxWorks.
1590         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1591         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1592         thread_file=""
1593         use_fixproto=yes
1594         ;;
1595 powerpc-*-lynxos*)
1596         xm_defines=POSIX
1597         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1598         tmake_file="t-lynx rs6000/t-lynx"
1599         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1600         thread_file=lynx
1601         gnu_ld=yes
1602         gas=yes
1603         ;;
1604 powerpcle-*-sysv*)
1605         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1606         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1607         use_fixproto=yes
1608         ;;
1609 powerpcle-*-elf*)
1610         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1611         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1612         use_fixproto=yes
1613         ;;
1614 powerpcle-*-eabisim*)
1615         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1616         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1617         ;;
1618 powerpcle-*-eabi*)
1619         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1620         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1621         ;;
1622 powerpc-*-kaos*)
1623         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1624         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1625         ;;
1626 powerpcle-*-kaos*)
1627         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1628         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1629         ;;
1630 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1631         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1632         tmake_file="rs6000/t-fprules rs6000/t-newas"
1633         use_collect2=yes
1634         extra_headers=
1635         use_fixproto=yes
1636         ;;
1637 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1638         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1639         tmake_file=rs6000/t-aix43
1640         use_collect2=yes
1641         thread_file='aix'
1642         extra_headers=
1643         ;;
1644 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1645         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1646         tmake_file=rs6000/t-aix43
1647         use_collect2=yes
1648         thread_file='aix'
1649         extra_headers=
1650         ;;
1651 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1652         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1653         tmake_file=rs6000/t-aix52
1654         use_collect2=yes
1655         thread_file='aix'
1656         extra_headers=
1657         ;;
1658 s390-*-linux*)
1659         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1660         tmake_file="${tmake_file} s390/t-crtstuff"
1661         ;;
1662 s390x-*-linux*)
1663         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1664         tm_p_file=s390/s390-protos.h
1665         md_file=s390/s390.md
1666         extra_modes=s390/s390-modes.def
1667         out_file=s390/s390.c
1668         tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
1669         ;;
1670 s390x-ibm-tpf*)
1671         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1672         tm_p_file=s390/s390-protos.h
1673         md_file=s390/s390.md
1674         extra_modes=s390/s390-modes.def
1675         extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
1676         out_file=s390/s390.c
1677         tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
1678         thread_file='tpf'
1679         ;;
1680 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1681 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1682   sh-*-linux* | sh[346lbe]*-*-linux* | \
1683   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1684    sh64-*-netbsd* | sh64l*-*-netbsd*)
1685         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1686         if test x${with_endian} = x; then
1687                 case ${target} in
1688                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1689                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1690                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1691                 shl* | sh64l* | sh*-*-linux* | \
1692                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1693                 sh[1234]*-*-*)                     with_endian=big ;;
1694                 *)                                 with_endian=big,little ;;
1695                 esac
1696         fi
1697         case ${with_endian} in
1698         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1699         big,little|little,big) ;;
1700         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1701         esac
1702         case ${with_endian} in
1703         little*)        tm_file="sh/little.h ${tm_file}" ;;
1704         esac
1705         tm_file="${tm_file} dbxelf.h elfos.h"
1706         case ${target} in
1707         sh*-*-netbsd*)  ;;
1708         *)              tm_file="${tm_file} svr4.h" ;;
1709         esac
1710         tm_file="${tm_file} sh/elf.h"
1711         case ${target} in
1712         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1713                         tm_file="${tm_file} sh/linux.h" ;;
1714         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1715                         ;;
1716         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1717         *)              tm_file="${tm_file} sh/embed-elf.h" ;;
1718         esac
1719         case ${target} in
1720         sh5*-*-netbsd*)
1721                 # SHmedia, 32-bit ABI
1722                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1723                 ;;
1724         sh64*-netbsd*)
1725                 # SHmedia, 64-bit ABI
1726                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1727                 ;;
1728         *-*-netbsd)
1729                 tmake_file="${tmake_file} sh/t-netbsd"
1730                 ;;
1731         sh64*-*-linux*)
1732                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1733                 tm_file="${tm_file} sh/sh64.h"
1734                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1735                 ;;
1736         sh64*)
1737                 tmake_file="${tmake_file} sh/t-sh64"
1738                 tm_file="${tm_file} sh/sh64.h"
1739                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1740                 ;;
1741         *-*-symbianelf*)
1742                 tmake_file="sh/t-symbian"
1743                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1744                 extra_objs="symbian.o"
1745                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1746                 ;;
1747         esac
1748         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1749         case `echo ${target} | sed 's/e[lb]-/-/'` in
1750         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
1751         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1752         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
1753         sh4a_single*)           sh_cpu_target=sh4a-single ;;
1754         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
1755         sh4al)                  sh_cpu_target=sh4al ;;
1756         sh4a*)                  sh_cpu_target=sh4a ;;
1757         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
1758         sh4_single*)            sh_cpu_target=sh4-single ;;
1759         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
1760         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
1761         sh3e*)                  sh_cpu_target=sh3e ;;
1762         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
1763         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
1764         sh2a_single*)           sh_cpu_target=sh2a-single ;;
1765         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
1766         sh2a*)                  sh_cpu_target=sh2a ;;
1767         sh2e*)                  sh_cpu_target=sh2e ;;
1768         sh2*)                   sh_cpu_target=sh2 ;;
1769         *)                      sh_cpu_target=sh1 ;;
1770         esac
1771         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
1772         case $sh_cpu_default in
1773         sh5-64media-nofpu | sh5-64media | \
1774           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
1775           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
1776           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
1777           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
1778           sh3e | sh3 | sh2e | sh2 | sh1) ;;
1779         "")     sh_cpu_default=${sh_cpu_target} ;;
1780         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
1781         esac
1782         sh_multilibs=${with_multilib_list}
1783         if test x${sh_multilibs} = x ; then
1784                 case ${target} in
1785                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
1786                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
1787                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
1788                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
1789                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
1790                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
1791                 esac
1792         fi
1793         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr a-z- A-Z_`
1794         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
1795         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e s/^m/sh/ -e 's/ m/ sh/g' | tr A-Z_ a-z-`
1796         for sh_multilib in ${sh_multilibs}; do
1797                 case ${sh_multilib} in
1798                 sh1 | sh2 | sh2e | sh3 | sh3e | \
1799                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
1800                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
1801                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
1802                 sh5-64media | sh5-64media-nofpu | \
1803                 sh5-32media | sh5-32media-nofpu | \
1804                 sh5-compact | sh5-compact-nofpu)
1805                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
1806                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`"
1807                         ;;
1808                 *)
1809                         echo "with_multilib_list=${sh_multilib} not supported."
1810                         exit 1
1811                         ;;
1812                 esac
1813         done
1814         if test x${enable_incomplete_targets} == xyes ; then
1815                 tm_defines="$tm_defines SUPPORT_SH1 SUPPORT_SH2E SUPPORT_SH4 SUPPORT_SH4_SINGLE SUPPORT_SH2A SUPPORT_SH2A_SINGLE SUPPORT_SH5_32MEDIA SUPPORT_SH5_32MEDIA_NOFPU SUPPORT_SH5_64MEDIA SUPPORT_SH5_64MEDIA_NOFPU"
1816         fi
1817         use_fixproto=yes
1818         ;;
1819 sh-*-rtemscoff*)
1820         tmake_file="sh/t-sh t-rtems"
1821         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
1822         ;;
1823 sh-*-rtems*)
1824         tmake_file="sh/t-sh sh/t-elf t-rtems"
1825         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
1826         ;;
1827 sh-wrs-vxworks)
1828         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
1829         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
1830         ;;
1831 sh-*-*)
1832         tm_file="${tm_file} dbxcoff.h sh/coff.h"
1833         use_fixproto=yes
1834         ;;
1835 sparc-*-netbsdelf*)
1836         tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
1837         ;;
1838 sparc-*-openbsd*)
1839         tm_defines=OBSD_OLD_GAS
1840         tm_file="sparc/sparc.h openbsd.h sparc/openbsd.h"
1841         # needed to unconfuse gdb
1842         tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
1843         # we need collect2 until our bug is fixed...
1844         use_collect2=yes
1845         ;;
1846 sparc64-*-openbsd*)
1847         tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
1848         gas=yes gnu_ld=yes
1849         with_cpu=ultrasparc
1850         ;;
1851 sparc-*-elf*)
1852         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
1853         tmake_file="sparc/t-elf sparc/t-crtfm"
1854         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1855         use_fixproto=yes
1856         ;;
1857 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
1858         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
1859         tmake_file="${tmake_file} sparc/t-crtfm"
1860         ;;
1861 sparc-*-rtems*)
1862         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
1863         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
1864         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1865         ;;
1866 sparc64-*-solaris2* | sparcv9-*-solaris2*)
1867         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h tm-dwarf2.h"
1868         if test x$gnu_ld = xyes; then
1869                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
1870         fi
1871         if test x$gas = xyes; then
1872                 tm_file="${tm_file} sparc/sol2-gas-bi.h"
1873         fi
1874         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
1875         if test x$gnu_ld = xyes; then
1876                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1877         else
1878                 tmake_file="$tmake_file t-slibgcc-sld"
1879         fi
1880         c_target_objs="sol2-c.o"
1881         cxx_target_objs="sol2-c.o"
1882         extra_objs="sol2.o"
1883         tm_p_file="${tm_p_file} sol2-protos.h"
1884         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
1885         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1886           no:*:*) ;;
1887           *:yes:* ) thread_file=posix ;;
1888           yes:*:* | *:*:yes ) thread_file=solaris ;;
1889         esac
1890         need_64bit_hwint=yes
1891         ;;
1892 sparc-*-solaris2*)
1893         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h"
1894         if test x$gnu_ld = xyes; then
1895                 tm_file="${tm_file} sparc/sol2-gld.h"
1896         fi
1897         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
1898         if test x$gnu_ld = xyes; then
1899                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1900         else
1901                 tmake_file="$tmake_file t-slibgcc-sld"
1902         fi
1903         case ${target} in
1904         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1905                 if test x$gnu_ld = xno; then
1906                         tm_file="${tm_file} sparc/sol26-sld.h"
1907                 fi
1908                 ;;
1909         *-*-solaris2.[789] | *-*-solaris2.1[0-9])
1910                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h tm-dwarf2.h"
1911                 if test x$gnu_ld = xyes; then
1912                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
1913                 fi
1914                 if test x$gas = xyes; then
1915                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
1916                 fi
1917                 tmake_file="$tmake_file sparc/t-sol2-64"
1918                 need_64bit_hwint=yes
1919                 ;;
1920         esac
1921         c_target_objs="sol2-c.o"
1922         cxx_target_objs="sol2-c.o"
1923         extra_objs="sol2.o"
1924         tm_p_file="${tm_p_file} sol2-protos.h"
1925         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1926         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1927           no:*:*) ;;
1928           *:yes:* ) thread_file=posix ;;
1929           yes:*:* | *:*:yes ) thread_file=solaris ;;
1930         esac
1931         ;;
1932 sparc-*-sysv4*)
1933         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
1934         tmake_file=t-svr4
1935         extra_parts="crtbegin.o crtend.o"
1936         use_fixproto=yes
1937         ;;
1938 sparclite-*-coff*)
1939         tm_file="${tm_file} sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
1940         tmake_file=sparc/t-sparclite
1941         ;;
1942 sparclite-*-elf*)
1943         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/liteelf.h"
1944         tmake_file="sparc/t-sparclite sparc/t-crtfm"
1945         extra_parts="crtbegin.o crtend.o"
1946         use_fixproto=yes
1947         ;;
1948 sparc86x-*-elf*)
1949         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/sp86x-elf.h"
1950         tmake_file="sparc/t-sp86x sparc/t-crtfm"
1951         extra_parts="crtbegin.o crtend.o"
1952         use_fixproto=yes
1953         ;;
1954 sparc64-*-elf*)
1955         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
1956         tmake_file="${tmake_file} sparc/t-crtfm"
1957         extra_parts="crtbegin.o crtend.o"
1958         use_fixproto=yes
1959         ;;
1960 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
1961         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
1962         tmake_file="${tmake_file} sparc/t-crtfm"
1963         case "x$with_cpu" in
1964                 xultrasparc) ;;
1965                 x) with_cpu=ultrasparc ;;
1966                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
1967         esac
1968         need_64bit_hwint=yes
1969         ;;
1970 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
1971         tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
1972         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
1973         ;;
1974 sparc64-*-netbsd*)
1975         tmake_file="${tmake_file} sparc/t-netbsd64"
1976         tm_file="sparc/biarch64.h ${tm_file}"
1977         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
1978         ;;
1979 strongarm-*-elf*)
1980         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
1981         tmake_file="arm/t-arm arm/t-strongarm-elf"
1982         out_file=arm/arm.c
1983         md_file=arm/arm.md
1984         extra_modes=arm/arm-modes.def
1985         use_fixproto=yes
1986         ;;
1987 strongarm-*-pe)
1988         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
1989         tmake_file="arm/t-arm arm/t-strongarm-pe"
1990         out_file=arm/arm.c
1991         md_file=arm/arm.md
1992         extra_modes=arm/arm-modes.def
1993         extra_objs=pe.o
1994         use_fixproto=yes
1995         ;;
1996 strongarm-*-kaos*)
1997         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
1998         tmake_file="arm/t-arm arm/t-strongarm-elf"
1999         out_file=arm/arm.c
2000         md_file=arm/arm.md
2001         extra_modes=arm/arm-modes.def
2002         ;;
2003 v850e1-*-*)
2004         target_cpu_default="TARGET_CPU_v850e1"
2005         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2006         tm_p_file=v850/v850-protos.h
2007         tmake_file=v850/t-v850e
2008         md_file=v850/v850.md
2009         out_file=v850/v850.c
2010         if test x$stabs = xyes
2011         then
2012                 tm_file="${tm_file} dbx.h"
2013         fi
2014         use_collect2=no
2015         c_target_objs="v850-c.o"
2016         cxx_target_objs="v850-c.o"
2017         use_fixproto=yes
2018         ;;
2019 v850e-*-*)
2020         target_cpu_default="TARGET_CPU_v850e"
2021         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2022         tm_p_file=v850/v850-protos.h
2023         tmake_file=v850/t-v850e
2024         md_file=v850/v850.md
2025         out_file=v850/v850.c
2026         if test x$stabs = xyes
2027         then
2028                 tm_file="${tm_file} dbx.h"
2029         fi
2030         use_collect2=no
2031         c_target_objs="v850-c.o"
2032         cxx_target_objs="v850-c.o"
2033         use_fixproto=yes
2034         ;;
2035 v850-*-*)
2036         target_cpu_default="TARGET_CPU_generic"
2037         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2038         tmake_file=v850/t-v850
2039         if test x$stabs = xyes
2040         then
2041                 tm_file="${tm_file} dbx.h"
2042         fi
2043         use_collect2=no
2044         c_target_objs="v850-c.o"
2045         cxx_target_objs="v850-c.o"
2046         use_fixproto=yes
2047         ;;
2048 vax-*-bsd*)                     # VAXen running BSD
2049         tm_file="${tm_file} vax/bsd.h"
2050         tmake_file=vax/t-memfuncs
2051         use_collect2=yes
2052         use_fixproto=yes
2053         ;;
2054 vax-*-sysv*)                    # VAXen running system V
2055         tm_file="${tm_file} vax/vaxv.h"
2056         tmake_file=vax/t-memfuncs
2057         use_fixproto=yes
2058         ;;
2059 vax-*-netbsdelf*)
2060         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2061         ;;
2062 vax-*-netbsd*)
2063         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2064         tmake_file=t-netbsd
2065         extra_parts=""
2066         use_collect2=yes
2067         ;;
2068 vax-*-openbsd*)
2069         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2070         use_collect2=yes
2071         ;;
2072 vax-*-ultrix*)                  # VAXen running ultrix
2073         tm_file="${tm_file} vax/ultrix.h"
2074         tmake_file=vax/t-memfuncs
2075         use_fixproto=yes
2076         ;;
2077 xscale-*-elf)
2078         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2079         tmake_file="arm/t-arm arm/t-xscale-elf"
2080         out_file=arm/arm.c
2081         md_file=arm/arm.md
2082         extra_modes=arm/arm-modes.def
2083         use_fixproto=yes
2084         ;;
2085 xscale-*-coff)
2086         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2087         tmake_file="arm/t-arm arm/t-xscale-coff"
2088         out_file=arm/arm.c
2089         md_file=arm/arm.md
2090         extra_modes=arm/arm-modes.def
2091         use_fixproto=yes
2092         ;;
2093 xstormy16-*-elf)
2094         # For historical reasons, the target files omit the 'x'.
2095         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2096         tm_p_file=stormy16/stormy16-protos.h
2097         md_file=stormy16/stormy16.md
2098         out_file=stormy16/stormy16.c
2099         tmake_file="stormy16/t-stormy16"
2100         extra_parts="crtbegin.o crtend.o"
2101         use_fixproto=yes
2102         ;;
2103 xtensa-*-elf*)
2104         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2105         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2106         ;;
2107 xtensa-*-linux*)
2108         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2109         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2110         ;;
2111 am33_2.0-*-linux*)
2112         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2113         tmake_file="${tmake_file} mn10300/t-linux"
2114         gas=yes gnu_ld=yes
2115         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2116         use_collect2=no
2117         ;;
2118 *)
2119         echo "*** Configuration ${target} not supported" 1>&2
2120         exit 1
2121         ;;
2122 esac
2123
2124 case ${target} in
2125 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2126         tmake_file="${tmake_file} i386/t-gmm_malloc"
2127         ;;
2128 i[34567]86-*-linux* | x86_64-*-linux*)
2129         tmake_file="${tmake_file} i386/t-pmm_malloc"
2130         ;;
2131 i[34567]86-*-* | x86_64-*-*)
2132         tmake_file="${tmake_file} i386/t-gmm_malloc"
2133         ;;
2134 esac
2135
2136 # Support for --with-cpu and related options (and a few unrelated options,
2137 # too).
2138 case ${with_cpu} in
2139   yes | no)
2140     echo "--with-cpu must be passed a value" 1>&2
2141     exit 1
2142     ;;
2143 esac
2144
2145 # If there is no $with_cpu option, try to infer one from ${target}.
2146 # This block sets nothing except for with_cpu.
2147 if test x$with_cpu = x ; then
2148   case ${target} in
2149     ep9312-*-*)
2150       # A Cirrus ARM variant.
2151       with_cpu="ep9312"
2152       ;;
2153     i486-*-*)
2154       with_cpu=i486
2155       ;;
2156     i586-*-*)
2157       case ${target_noncanonical} in
2158         k6_2-*)
2159           with_cpu=k6-2
2160           ;;
2161         k6_3-*)
2162           with_cpu=k6-3
2163           ;;
2164         k6-*)
2165           with_cpu=k6
2166           ;;
2167         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2168           with_cpu=pentium-mmx
2169           ;;
2170         *)
2171           with_cpu=pentium
2172           ;;
2173       esac
2174       ;;
2175     i686-*-* | i786-*-*)
2176       case ${target_noncanonical} in
2177         k8-*|opteron-*|athlon_64-*)
2178           with_cpu=k8
2179           ;;
2180         athlon_xp-*|athlon_mp-*|athlon_4-*)
2181           with_cpu=athlon-4
2182           ;;
2183         athlon_tbird-*|athlon-*)
2184           with_cpu=athlon
2185           ;;
2186         pentium2-*)
2187           with_cpu=pentium2
2188           ;;
2189         pentium3-*|pentium3m-*)
2190           with_cpu=pentium3
2191           ;;
2192         pentium4-*|pentium4m-*)
2193           with_cpu=pentium4
2194           ;;
2195         prescott-*)
2196           with_cpu=prescott
2197           ;;
2198         nocona-*)
2199           with_cpu=nocona
2200           ;;
2201         pentium_m-*)
2202           with_cpu=pentium-m
2203           ;;
2204         *)
2205           with_cpu=pentiumpro
2206           ;;
2207       esac
2208       ;;
2209     x86_64-*-*)
2210       with_cpu=k8
2211       ;;
2212     alphaev6[78]*-*-*)
2213       with_cpu=ev67
2214       ;;
2215     alphaev6*-*-*)
2216       with_cpu=ev6
2217       ;;
2218     alphapca56*-*-*)
2219       with_cpu=pca56
2220       ;;
2221     alphaev56*-*-*)
2222       with_cpu=ev56
2223       ;;
2224     alphaev5*-*-*)
2225       with_cpu=ev5
2226       ;;
2227     frv-*-*linux*)
2228       with_cpu=fr400
2229       ;;
2230     sparc*-*-*)
2231       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2232       if [ x$with_cpu = xsparc64 ]; then
2233         with_cpu=v9
2234       fi
2235       ;;
2236   esac
2237 fi
2238
2239 # Similarly for --with-float
2240 if test x$with_float = x; then
2241         case ${target} in
2242         ep9312-*-*)
2243                 with_float=hard
2244                 ;;
2245         esac
2246 fi
2247
2248         # Similarly for --with-schedule.
2249         if test x$with_schedule = x; then
2250                 case ${target} in
2251                 hppa1* | parisc1*)
2252                         # Override default PA8000 scheduling model.
2253                         with_schedule=7100LC
2254                         ;;
2255                 esac
2256         fi
2257
2258         # Validate and mark as valid any --with options supported
2259         # by this target.  In order to use a particular --with option
2260         # you must list it in supported_defaults; validating the value
2261         # is optional.  This case statement should set nothing besides
2262         # supported_defaults.
2263
2264         supported_defaults=
2265         case "${target}" in
2266         alpha*-*-*)
2267                 supported_defaults="cpu tune"
2268                 for which in cpu tune; do
2269                         eval "val=\$with_$which"
2270                         case "$val" in
2271                         "" \
2272                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2273                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2274                         | 21264a)
2275                                 ;;
2276                         *)
2277                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2278                                 exit 1
2279                                 ;;
2280                         esac
2281                 done
2282                 ;;
2283
2284         arm*-*-*)
2285                 supported_defaults="arch cpu float tune fpu abi"
2286                 for which in cpu tune; do
2287                         # See if it matches any of the entries in arm-cores.def
2288                         eval "val=\$with_$which"
2289                         if [ x"$val" = x ] \
2290                             || grep "^ARM_CORE(\"$val\"," \
2291                                     ${srcdir}/config/arm/arm-cores.def \
2292                                     > /dev/null; then
2293                           # Ok
2294                           new_val=`grep "^ARM_CORE(\"$val\"," \
2295                                 ${srcdir}/config/arm/arm-cores.def | \
2296                                 sed -e 's/^[^,]*,[      ]*//' | \
2297                                 sed -e 's/,.*$//'`
2298                           eval "target_${which}_cname=$new_val"
2299                         echo "For $val real value is $new_val"
2300                           true
2301                         else
2302                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2303                           exit 1
2304                         fi
2305                 done
2306
2307                 case "$with_arch" in
2308                 "" \
2309                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2310                 | armv5te | armv6j | iwmmxt | ep9312)
2311                         # OK
2312                         ;;
2313                 *)
2314                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2315                         exit 1
2316                         ;;
2317                 esac
2318
2319                 case "$with_float" in
2320                 "" \
2321                 | soft | hard | softfp)
2322                         # OK
2323                         ;;
2324                 *)
2325                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2326                         exit 1
2327                         ;;
2328                 esac
2329
2330                 case "$with_fpu" in
2331                 "" \
2332                 | fpa | fpe2 | fpe3 | maverick | vfp )
2333                         # OK
2334                         ;;
2335                 *)
2336                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2337                         exit 1
2338                         ;;
2339                 esac
2340
2341                 case "$with_abi" in
2342                 "" \
2343                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2344                         #OK
2345                         ;;
2346                 *)
2347                         echo "Unknown ABI used in --with-abi=$with_abi"
2348                         exit 1
2349                         ;;
2350                 esac
2351
2352                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2353                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2354                 fi
2355                 ;;
2356
2357         fr*-*-*linux*)
2358                 supported_defaults=cpu
2359                 case "$with_cpu" in
2360                 fr400) ;;
2361                 *)
2362                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2363                         exit 1
2364                         ;;
2365                 esac
2366                 ;;
2367
2368         m68k*-linux*)
2369                 supported_defaults="cpu"
2370                 case "$with_cpu" in
2371                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2372                         # OK
2373                         ;;
2374                 *)
2375                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2376                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2377                         exit 1
2378                         ;;
2379                 esac
2380                 ;;
2381
2382         hppa*-*-* | parisc*-*-*)
2383                 supported_defaults="arch schedule"
2384
2385                 case "$with_arch" in
2386                 "" | 1.0 | 1.1 | 2.0)
2387                         # OK
2388                         ;;
2389                 *)
2390                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2391                         exit 1
2392                         ;;
2393                 esac
2394
2395                 case "$with_schedule" in
2396                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2397                         # OK
2398                         ;;
2399                 *)
2400                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2401                         exit 1
2402                         ;;
2403                 esac
2404                 ;;
2405
2406         i[34567]86-*-* | x86_64-*-*)
2407                 supported_defaults="arch cpu tune"
2408                 for which in arch cpu tune; do
2409                         eval "val=\$with_$which"
2410                         case ${val} in
2411                         "" | i386 | i486 \
2412                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2413                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2414                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2415                         | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
2416                         | athlon64 | athlon-fx | prescott | pentium-m \
2417                         | pentium4m | pentium3m| nocona)
2418                                 # OK
2419                                 ;;
2420                         *)
2421                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2422                                 exit 1
2423                                 ;;
2424                         esac
2425                 done
2426                 ;;
2427
2428         mips*-*-*)
2429                 supported_defaults="abi arch float tune divide"
2430
2431                 case ${with_float} in
2432                 "" | soft | hard)
2433                         # OK
2434                         ;;
2435                 *)
2436                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2437                         exit 1
2438                         ;;
2439                 esac
2440
2441                 case ${with_abi} in
2442                 "" | 32 | o64 | n32 | 64 | eabi)
2443                         # OK
2444                         ;;
2445                 *)
2446                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2447                         exit 1
2448                         ;;
2449                 esac
2450
2451                 case ${with_divide} in
2452                 "" | breaks | traps)
2453                         # OK
2454                         ;;
2455                 *)
2456                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2457                         exit 1
2458                 esac
2459                 ;;
2460
2461         powerpc*-*-* | rs6000-*-*)
2462                 supported_defaults="cpu float tune"
2463
2464                 for which in cpu tune; do
2465                         eval "val=\$with_$which"
2466                         case ${val} in
2467                         default32 | default64)
2468                                 with_which="with_$which"
2469                                 eval $with_which=
2470                                 ;;
2471                         "" | common \
2472                         | power | power2 | power3 | power4 \
2473                         | powerpc | powerpc64 \
2474                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2475                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2476                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2477                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2478                         | 8540 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2479                                 # OK
2480                                 ;;
2481                         *)
2482                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2483                                 exit 1
2484                                 ;;
2485                         esac
2486                 done
2487                 ;;
2488
2489         s390*-*-*)
2490                 supported_defaults="arch mode tune"
2491
2492                 for which in arch tune; do
2493                         eval "val=\$with_$which"
2494                         case ${val} in
2495                         "" | g5 | g6 | z900 | z990)
2496                                 # OK
2497                                 ;;
2498                         *)
2499                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2500                                 exit 1
2501                                 ;;
2502                         esac
2503                 done
2504
2505                 case ${with_mode} in
2506                 "" | esa | zarch)
2507                         # OK
2508                         ;;
2509                 *)
2510                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2511                         exit 1
2512                         ;;
2513                 esac
2514                 ;;
2515
2516         sh[123456ble]-*-* | sh-*-*)
2517                 supported_defaults="cpu"
2518                 case "`echo $with_cpu | tr A-Z_ a-z- | sed s/sh/m/`" in
2519                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2520                         # OK
2521                         ;;
2522                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2523                         ;;
2524                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2525                         ;;
2526                 *)
2527                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2528                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2529                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2530                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2531                         exit 1
2532                         ;;
2533                 esac
2534                 ;;
2535         sparc*-*-*)
2536                 supported_defaults="cpu float tune"
2537
2538                 for which in cpu tune; do
2539                         eval "val=\$with_$which"
2540                         case ${val} in
2541                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2542                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2543                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2544                         | v9 | ultrasparc | ultrasparc3)
2545                                 # OK
2546                                 ;;
2547                         *)
2548                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2549                                 exit 1
2550                                 ;;
2551                         esac
2552                 done
2553
2554                 case ${with_float} in
2555                 "" | soft | hard)
2556                         # OK
2557                         ;;
2558                 *)
2559                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2560                         exit 1
2561                         ;;
2562                 esac
2563                 ;;
2564
2565         v850*-*-*)
2566                 supported_defaults=cpu
2567                 case ${with_cpu} in
2568                 "" | v850e | v850e1)
2569                         # OK
2570                         ;;
2571                 *)
2572                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2573                         exit 1
2574                         ;;
2575                 esac
2576                 ;;
2577         esac
2578
2579         # Set some miscellaneous flags for particular targets.
2580         target_cpu_default2=
2581         case ${target} in
2582         alpha*-*-*)
2583                 if test x$gas = xyes
2584                 then
2585                         target_cpu_default2="MASK_GAS"
2586                 fi
2587                 ;;
2588
2589         arm*-*-*)
2590                 if test x$target_cpu_cname = x
2591                 then
2592                         target_cpu_default2=TARGET_CPU_generic
2593                 else
2594                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2595                 fi
2596                 ;;
2597
2598         m68k*-linux*)
2599                 case "x$with_cpu" in
2600                 x)
2601                         # The most generic
2602                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2603                         ;;
2604                 xm68020)
2605                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2606                         ;;
2607                 xm68030)
2608                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2609                         ;;
2610                 xm68040)
2611                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2612                         ;;
2613                 xm68060)
2614                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2615                         ;;
2616                 xm68020-40)
2617                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2618                         ;;
2619                 xm68020-60)
2620                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2621                         ;;
2622                 *)
2623                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
2624                         exit 1
2625                         ;;
2626                 esac
2627                 ;;
2628
2629         hppa*-*-* | parisc*-*-*)
2630                 target_cpu_default2="MASK_BIG_SWITCH"
2631                 if test x$gas = xyes
2632                 then
2633                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2634                 fi
2635                 ;;
2636
2637         mips*-*-*)
2638                 if test x$gnu_ld = xyes
2639                 then
2640                         target_cpu_default2="MASK_SPLIT_ADDR"
2641                 fi
2642                 case ${target} in
2643                         mips*el-*-*)
2644                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2645                                 ;;
2646                 esac
2647                 if test "x$enable_gofast" = xyes
2648                 then
2649                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2650                         tmake_file="mips/t-gofast $tmake_file"
2651                 else
2652                         tmake_file="mips/t-mips $tmake_file"
2653                 fi
2654                 ;;
2655
2656         powerpc*-*-* | rs6000-*-*)
2657                 # FIXME: The PowerPC port uses the value set at compile time,
2658                 # although it's only cosmetic.
2659                 if test "x$with_cpu" != x
2660                 then
2661                         target_cpu_default2="\\\"$with_cpu\\\""
2662                 fi
2663                 out_file=rs6000/rs6000.c
2664                 c_target_objs="${c_target_objs} rs6000-c.o"
2665                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2666                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
2667                 ;;
2668
2669         sparc*-*-*)
2670                 # Some standard aliases.
2671                 case x$with_cpu in
2672                 xsparc)
2673                         with_cpu=v7
2674                         ;;
2675                 xsparc86x)
2676                         with_cpu=sparclite86x
2677                         ;;
2678                 xsparcv9 | xsparc64)
2679                         with_cpu=v9
2680                         ;;
2681                 esac
2682
2683                 # The Sparc port checks this value at compile-time.
2684                 target_cpu_default2="TARGET_CPU_$with_cpu"
2685                 ;;
2686         v850*-*-*)
2687                 # FIXME: The v850 is "special" in that it does not support
2688                 # runtime CPU selection, only --with-cpu.
2689                 case "x$with_cpu" in
2690                 x)
2691                         ;;
2692                 xv850e)
2693                         target_cpu_default2="TARGET_CPU_$with_cpu"
2694                         ;;
2695                 esac
2696                 ;;
2697         esac
2698
2699         t=
2700         all_defaults="abi cpu arch tune schedule float mode fpu divide"
2701         for option in $all_defaults
2702         do
2703                 eval "val=\$with_$option"
2704                 if test -n "$val"; then
2705                         case " $supported_defaults " in
2706                         *" $option "*)
2707                                 ;;
2708                         *)
2709                                 echo "This target does not support --with-$option." 2>&1
2710                                 exit 1
2711                                 ;;
2712                         esac
2713
2714                         if test "x$t" = x
2715                         then
2716                                 t="{ \"$option\", \"$val\" }"
2717                         else
2718                                 t="${t}, { \"$option\", \"$val\" }"
2719                         fi
2720                 fi
2721         done
2722         if test "x$t" = x
2723         then
2724                 configure_default_options="{ { NULL, NULL} }"
2725         else
2726                 configure_default_options="{ ${t} }"
2727         fi
2728
2729         if test "$target_cpu_default2" != ""
2730         then
2731                 if test "$target_cpu_default" != ""
2732                 then
2733                         target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
2734                 else
2735                         target_cpu_default=$target_cpu_default2
2736                 fi
2737         fi