1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # gas_flag Either yes or no depending on whether GNU as was
51 # gnu_ld_flag Either yes or no depending on whether GNU ld was
54 # This file sets the following shell variables for use by the
55 # autoconf-generated configure script:
57 # cpu_type The name of the cpu, if different from the first
58 # chunk of the canonical target name.
60 # tm_defines List of target macros to define for all compilations.
62 # tm_file A list of target macro files, if different from
63 # "$cpu_type/$cpu_type.h". Usually it's constructed
64 # per target in a way like this:
65 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
66 # Note that the preferred order is:
67 # - specific target header "${cpu_type}/${cpu_type.h}"
68 # - generic headers like dbxelf.h elfos.h, etc.
69 # - specializing target headers like ${cpu_type.h}/elf.h
70 # This helps to keep OS specific stuff out of the CPU
71 # defining header ${cpu_type}/${cpu_type.h}.
73 # It is possible to include automatically-generated
74 # build-directory files by prefixing them with "./".
75 # All other files should relative to $srcdir/config.
77 # tm_p_file Location of file with declarations for functions
80 # out_file The name of the machine description C support
81 # file, if different from "$cpu_type/$cpu_type.c".
83 # md_file The name of the machine-description file, if
84 # different from "$cpu_type/$cpu_type.md".
86 # tmake_file A list of machine-description-specific
87 # makefile-fragments, if different from
88 # "$cpu_type/t-$cpu_type".
90 # extra_modes The name of the file containing a list of extra
91 # machine modes, if necessary and different from
92 # "$cpu_type/$cpu_type-modes.def".
94 # extra_objs List of extra objects that should be linked into
95 # the compiler proper (cc1, cc1obj, cc1plus)
96 # depending on target.
98 # extra_gcc_objs List of extra objects that should be linked into
99 # the compiler driver (gcc) depending on target.
101 # extra_headers List of used header files from the directory
102 # config/${cpu_type}.
104 # use_gcc_tgmath If set, add tgmath.h to the list of used header
107 # extra_passes List of extra executables compiled for this target
108 # machine, used for compiling from source to object.
110 # extra_parts List of extra object files that should be compiled
111 # for this target machine.
113 # extra_programs Like extra_passes, but these are used when linking.
115 # extra_options List of target-dependent .opt files.
117 # c_target_objs List of extra target-dependent objects that be
118 # linked into the C compiler only.
120 # cxx_target_objs List of extra target-dependent objects that be
121 # linked into the C++ compiler only.
123 # fortran_target_objs List of extra target-dependent objects that be
124 # linked into the fortran compiler only.
126 # target_gtfiles List of extra source files with type information.
128 # xm_defines List of macros to define when compiling for the
131 # xm_file List of files to include when compiling for the
134 # use_collect2 Set to yes or no, depending on whether collect2
137 # target_cpu_default Set to override the default target model.
139 # gdb_needs_out_file_path
140 # Set to yes if gdb needs a dir command with
141 # `dirname $out_file`.
143 # thread_file Set to control which thread package to use.
145 # gas Set to yes or no depending on whether the target
146 # system normally uses GNU as.
148 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
149 # for this target. This is true iff this target
150 # supports "long" or "wchar_t" wider than 32 bits.
151 # The setting made here must match the one made in
152 # other locations such as libcpp/configure.ac
154 # configure_default_options
155 # Set to an initializer for configure_default_options
156 # in configargs.h, based on --with-cpu et cetera.
158 # use_fixproto Set to "yes" if fixproto should be run normally,
159 # "no" if fixproto should never be run.
161 # The following variables are used in each case-construct to build up the
162 # outgoing variables:
164 # gnu_ld Set to yes or no depending on whether the target
165 # system normally uses GNU ld.
182 # Set this to force installation and use of collect2.
184 # Set this to override the default target model.
186 # Set this if gdb needs a dir command with `dirname $out_file`
187 gdb_needs_out_file_path=
188 # Set this to control which thread package will be used.
190 # Reinitialize these from the flag values every loop pass, since some
191 # configure entries modify them.
193 gnu_ld="$gnu_ld_flag"
194 default_use_cxa_atexit=no
198 # Default to not using fixproto. Targets which need fixproto should
199 # specifically set this to 'yes'.
202 # Don't carry these over build->host->target. Please.
206 # Obsolete configurations.
209 # if test "x$enable_obsolete" != xyes; then
210 # echo "*** Configuration ${target} is obsolete." >&2
211 # echo "*** Specify --enable-obsolete to build it anyway." >&2
212 # echo "*** Support will be REMOVED in the next major release of GCC," >&2
213 # echo "*** unless a maintainer comes forward." >&2
218 # Unsupported targets list. Do not put an entry in this list unless
219 # it would otherwise be caught by a more permissive pattern. The list
220 # should be in alphabetical order.
223 | i[34567]86-*-go32* \
224 | mips64orion*-*-rtems* \
225 | sparc-hal-solaris2* \
233 | *-*-solaris2.[0-6] \
234 | *-*-solaris2.[0-6].* \
238 echo "*** Configuration ${target} not supported" 1>&2
243 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
244 # updated in each machine entry. Also set default extra_headers for some
247 cpu_type=`echo ${target} | sed 's/-.*$//'`
252 tmake_file=m32c/t-m32c
263 extra_headers="mmintrin.h arm_neon.h"
264 c_target_objs="arm-c.o"
265 cxx_target_objs="arm-c.o"
277 extra_headers=math-68881.h
281 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
282 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
283 nmmintrin.h bmmintrin.h mmintrin-common.h
288 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
289 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
290 nmmintrin.h bmmintrin.h mmintrin-common.h
295 extra_headers=ia64intrin.h
305 extra_headers=math-68881.h
313 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
316 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a|xcell)
339 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
340 sh[123456789lbe]*-*-* | sh-*-*)
346 tm_file=${cpu_type}/${cpu_type}.h
347 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
349 tm_p_file=${cpu_type}/${cpu_type}-protos.h
352 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
354 extra_modes=${cpu_type}/${cpu_type}-modes.def
356 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
358 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
363 if test "x$enable_cld" = xyes; then
364 tm_defines="${tm_defines} USE_IX86_CLD=1"
368 tm_file="i386/biarch64.h ${tm_file}"
369 if test "x$enable_cld" = xyes; then
370 tm_defines="${tm_defines} USE_IX86_CLD=1"
375 # On a.out targets, we need to use collect2.
382 # Common parts for widely ported systems.
385 tm_file="${tm_file} darwin.h"
388 tm_file="${tm_file} darwin9.h"
391 tm_file="${tm_file} ${cpu_type}/darwin.h"
392 tm_p_file="${tm_p_file} darwin-protos.h"
393 tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
394 target_gtfiles="\$(srcdir)/config/darwin.c"
395 extra_options="${extra_options} darwin.opt"
396 c_target_objs="darwin-c.o"
397 cxx_target_objs="darwin-c.o"
398 fortran_target_objs="darwin-f.o"
399 extra_objs="darwin.o"
400 extra_gcc_objs="darwin-driver.o"
401 default_use_cxa_atexit=yes
402 case ${enable_threads} in
403 "" | yes | posix) thread_file='posix' ;;
406 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
407 # This is the place-holder for the generic a.out configuration
408 # of FreeBSD. No actual configuration resides here since
409 # there was only ever a bare-bones ix86 configuration for
410 # a.out and it exists solely in the machine-specific section.
411 # This place-holder must exist to avoid dropping into
412 # the generic ELF configuration of FreeBSD (i.e. it must be
413 # ordered before that section).
416 # This is the generic ELF configuration of FreeBSD. Later
417 # machine-specific sections may refine and add to this
420 # Due to tm_file entry ordering issues that vary between cpu
421 # architectures, we only define fbsd_tm_file to allow the
422 # machine-specific section to dictate the final order of all
423 # entries of tm_file with the minor exception that components
424 # of the tm_file set here will always be of the form:
426 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
428 # The machine-specific section should not tamper with this
429 # ordering but may order all other entries of tm_file as it
430 # pleases around the provided core setting.
433 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
434 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
435 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
436 tmake_file="t-slibgcc-elf-ver t-freebsd"
437 case ${enable_threads} in
439 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
443 tmake_file="${tmake_file} t-freebsd-thread"
444 # Before 5.0, FreeBSD can't bind shared libraries to -lc
445 # when "optionally" threaded via weak pthread_* checks.
447 *-*-freebsd[34] | *-*-freebsd[34].*)
448 tmake_file="${tmake_file} t-slibgcc-nolc-override"
453 echo 'Unknown thread configuration for FreeBSD'
457 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
459 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
460 # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
461 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
462 extra_options="${extra_options} linux.opt"
465 case ${enable_threads} in
466 "" | yes | posix) thread_file='posix' ;;
468 tmake_file="t-slibgcc-elf-ver t-linux"
471 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
474 tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
477 # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
478 default_use_cxa_atexit=yes
482 # On the Hurd, the setup is just about the same on
483 # each different CPU. The specific machines that we
484 # support are matched above and just set $cpu_type.
485 tm_file="${cpu_type}/gnu.h"
486 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
487 # GNU tools are the only tools.
490 # These details are the same as for Linux.
491 # But here we need a little extra magic.
492 tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
495 tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
498 tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
501 # Assume that glibc is being used and so __cxa_atexit is provided.
502 default_use_cxa_atexit=yes
506 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
510 # NetBSD 2.0 and later get POSIX threads enabled by default.
511 # Allow them to be explicitly enabled on any other version.
512 case ${enable_threads} in
515 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
517 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
523 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
527 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
528 # ELF configurations. We will clear extra_parts in the
529 # a.out configurations.
531 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
532 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
536 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
537 # default (unless overridden by --disable-__cxa_atexit).
539 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
540 default_use_cxa_atexit=yes
545 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
546 case ${enable_threads} in
549 tmake_file="${tmake_file} t-openbsd-thread"
553 *-*-openbsd2.*|*-*-openbsd3.[012])
554 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
558 case ${enable_threads} in
559 yes) thread_file='rtems' ;;
565 extra_options="${extra_options} vxworks.opt"
567 case ${enable_threads} in
569 "" | yes | vxworks) thread_file='vxworks' ;;
570 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
574 # Assume that newlib is being used and so __cxa_atexit is provided.
575 default_use_cxa_atexit=yes
580 # Support site-specific machine types.
582 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
583 tm_file=${cpu_type}/$rest.h
584 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
585 then xm_file=${cpu_type}/xm-$rest.h
587 if test -f $srcdir/config/${cpu_type}/t-$rest
588 then tmake_file=${cpu_type}/t-$rest
592 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
593 target_cpu_default="MASK_GAS"
594 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
597 target_cpu_default="MASK_GAS"
598 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
601 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
602 target_cpu_default="MASK_GAS"
603 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
604 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
607 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
608 target_cpu_default="MASK_GAS"
609 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
612 tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
613 tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
614 # default x-alpha is only appropriate for dec-osf.
615 target_cpu_default="MASK_GAS"
616 tmake_file="alpha/t-alpha alpha/t-ieee"
619 if test x$stabs = xyes
621 tm_file="${tm_file} dbx.h"
623 if test x$gas != xyes
625 extra_passes="mips-tfile mips-tdump"
628 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
629 tm_file="${tm_file} alpha/osf.h"
630 extra_headers=va_list.h
633 # Define TARGET_SUPPORT_ARCH except on 4.0a.
636 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
640 tm_file="${tm_file} alpha/osf5.h"
641 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
644 case ${enable_threads} in
647 tmake_file="${tmake_file} alpha/t-osf-pthread"
652 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
653 xm_file="alpha/xm-vms.h"
654 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
659 tm_file="${tm_file} alpha/vms.h"
660 xm_file=alpha/xm-vms.h
661 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
666 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
667 extra_parts="crtinit.o crtfini.o"
669 arm-*-coff* | armel-*-coff*)
670 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
671 tmake_file="arm/t-arm arm/t-arm-coff"
674 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
675 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
678 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
679 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
682 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
683 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
686 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
687 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
691 arm*-*-linux*) # ARM GNU/Linux with ELF
692 tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
695 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
698 tmake_file="${tmake_file} t-linux arm/t-arm"
701 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
702 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
703 # The BPABI long long divmod functions return a 128-bit value in
704 # registers r0-r3. Correctly modeling that requires the use of
707 # The EABI requires the use of __cxa_atexit.
708 default_use_cxa_atexit=yes
711 tmake_file="$tmake_file arm/t-linux"
714 tm_file="$tm_file arm/aout.h arm/arm.h"
715 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
717 arm*-*-uclinux*) # ARM ucLinux
718 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h"
719 tmake_file="arm/t-arm arm/t-arm-elf"
721 arm*-*-uclinux-*eabi)
722 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
723 tmake_file="$tmake_file arm/t-bpabi"
724 # The BPABI long long divmod functions return a 128-bit value in
725 # registers r0-r3. Correctly modeling that requires the use of
728 # The EABI requires the use of __cxa_atexit.
729 default_use_cxa_atexit=yes
731 tm_file="$tm_file arm/aout.h arm/arm.h"
732 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
735 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
736 tmake_file="arm/t-arm arm/t-arm-elf"
737 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
739 arm*-*-eabi* | arm*-*-symbianelf* )
740 # The BPABI long long divmod functions return a 128-bit value in
741 # registers r0-r3. Correctly modeling that requires the use of
744 default_use_cxa_atexit=yes
745 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
746 tmake_file="arm/t-arm arm/t-arm-elf"
749 tmake_file="${tmake_file} arm/t-bpabi"
752 tm_file="${tm_file} arm/symbian.h"
753 # We do not include t-bpabi for Symbian OS because the system
754 # provides its own implementation of the BPABI functions.
755 tmake_file="${tmake_file} arm/t-symbian"
758 tm_file="${tm_file} arm/aout.h arm/arm.h"
759 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
762 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
763 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
764 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
767 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
768 tmake_file="arm/t-arm arm/t-arm-elf"
769 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
772 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
773 tmake_file="arm/t-arm arm/t-wince-pe"
774 extra_options="${extra_options} arm/pe.opt"
778 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
779 tmake_file="arm/t-arm arm/t-pe"
780 extra_options="${extra_options} arm/pe.opt"
784 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
785 tmake_file="avr/t-avr t-rtems avr/t-rtems"
788 tm_file="avr/avr.h dbxelf.h"
791 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
792 tmake_file=bfin/t-bfin-elf
796 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/uclinux.h"
797 tmake_file=bfin/t-bfin-uclinux
798 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
799 extra_options="${extra_options} linux.opt"
803 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h ./linux-sysroot-suffix.h"
804 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
805 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
809 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
810 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
813 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
814 tmake_file=bfin/t-bfin
817 crisv32-*-elf | crisv32-*-none)
818 tm_file="dbxelf.h elfos.h ${tm_file}"
819 tmake_file="cris/t-cris"
820 target_cpu_default=32
822 extra_options="${extra_options} cris/elf.opt"
824 cris-*-elf | cris-*-none)
825 tm_file="dbxelf.h elfos.h ${tm_file}"
826 tmake_file="cris/t-cris cris/t-elfmulti"
828 extra_options="${extra_options} cris/elf.opt"
830 crisv32-*-linux* | cris-*-linux*)
831 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
832 # We need to avoid using t-linux, so override default tmake_file
833 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
834 extra_options="${extra_options} cris/linux.opt"
837 target_cpu_default=10
840 target_cpu_default=32
845 tm_file="elfos.h ${tm_file}"
846 extra_parts="crtbegin.o crtend.o"
850 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
851 tmake_file=fr30/t-fr30
852 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
855 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
859 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
860 linux.h frv/linux.h frv/frv-abi.h"
861 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
864 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
865 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
868 tmake_file="h8300/t-h8300 h8300/t-elf"
869 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
872 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
875 target_cpu_default="MASK_PA_11|MASK_PA_20"
876 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
877 pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
878 tmake_file="${tmake_file} pa/t-linux64"
883 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
884 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
885 pa/pa32-regs.h pa/pa32-linux.h"
886 tmake_file="${tmake_file} pa/t-linux"
887 # Set the libgcc version number
888 if test x$sjlj = x1; then
889 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
891 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
894 # port not yet contributed.
896 # target_cpu_default="MASK_PA_11"
900 hppa1.1-*-* | hppa2*-*-*)
901 target_cpu_default="MASK_PA_11"
904 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
905 pa/pa-hpux.h pa/pa-hpux10.h"
906 extra_options="${extra_options} pa/pa-hpux.opt"
909 tm_file="${tm_file} pa/pa-hpux1010.h"
910 extra_options="${extra_options} pa/pa-hpux1010.opt"
913 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
914 case ${enable_threads} in
916 if test x$have_pthread_h = xyes ; then
917 tmake_file="${tmake_file} pa/t-dce-thr"
921 tmake_file="${tmake_file} pa/t-dce-thr"
924 # Set the libgcc version number
925 if test x$sjlj = x1; then
926 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
928 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
935 target_cpu_default="MASK_PA_11|MASK_PA_20"
936 if test x$gnu_ld = xyes
938 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
940 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
941 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
945 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
946 extra_options="${extra_options} pa/pa-hpux1111.opt"
949 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
952 extra_options="${extra_options} pa/pa-hpux.opt \
953 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
955 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
956 # Set the libgcc version number
957 if test x$sjlj = x1; then
958 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
960 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
962 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
964 case x${enable_threads} in
973 hppa1.1-*-* | hppa2*-*-*)
974 target_cpu_default="MASK_PA_11"
977 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
978 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
979 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
982 tm_file="${tm_file} pa/pa-hpux1111.h"
983 extra_options="${extra_options} pa/pa-hpux1111.opt"
986 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
987 # Set the libgcc version number
988 if test x$sjlj = x1; then
989 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
991 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
993 case x${enable_threads} in
1001 i[34567]86-*-darwin*)
1002 need_64bit_hwint=yes
1004 # This is so that '.../configure && make' doesn't fail due to
1005 # config.guess deciding that the configuration is i386-*-darwin* and
1006 # then this file using that to set --with-cpu=i386 which has no -m64
1008 with_cpu=${with_cpu:-generic}
1009 tmake_file="${tmake_file} i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
1012 with_cpu=${with_cpu:-generic}
1013 tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
1014 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1017 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1018 tmake_file="i386/t-i386elf t-svr4"
1021 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/x86-64.h"
1022 tmake_file="i386/t-i386elf t-svr4"
1025 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1027 i[34567]86-*-freebsd*)
1028 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1031 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1032 tmake_file="${tmake_file} i386/t-crtstuff"
1034 i[34567]86-*-netbsdelf*)
1035 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1037 i[34567]86-*-netbsd*)
1038 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1044 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1045 tmake_file="${tmake_file} i386/t-crtstuff"
1047 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1048 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1049 # needed to unconfuse gdb
1050 tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1051 # we need collect2 until our bug is fixed...
1054 i[34567]86-*-openbsd*)
1055 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1056 tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1061 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1063 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1064 # Intel 80386's running GNU/*
1065 # with ELF format using glibc 2
1066 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1068 i[34567]86-*-linux*)
1069 if test x$enable_targets = xall; then
1070 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1071 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1072 tmake_file="${tmake_file} i386/t-linux64 i386/t-fprules-softfp64 soft-fp/t-softfp"
1073 need_64bit_hwint=yes
1074 case X"${with_cpu}" in
1075 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1078 if test x$with_cpu_64 = x; then
1083 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1084 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1089 tm_file="${tm_file} i386/linux.h"
1092 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1093 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1095 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1097 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1098 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1099 i386/x86-64.h i386/linux64.h"
1101 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1102 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1104 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm i386/t-fprules-softfp64 soft-fp/t-softfp t-dfprules"
1108 i[34567]86-pc-msdosdjgpp*)
1109 xm_file=i386/xm-djgpp.h
1110 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1111 tmake_file=i386/t-djgpp
1112 extra_options="${extra_options} i386/djgpp.opt"
1116 i[34567]86-*-lynxos*)
1118 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1119 tmake_file="i386/t-crtstuff t-lynx"
1120 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1121 extra_options="${extra_options} lynx.opt"
1126 i[3456x]86-*-netware*)
1127 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1128 tmake_file=i386/t-netware
1129 extra_objs=netware.o
1132 extra_objs="$extra_objs nwld.o"
1133 tm_file="${tm_file} i386/nwld.h"
1134 tmake_file="${tmake_file} i386/t-nwld"
1135 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1138 case x${enable_threads} in
1139 x | xyes | xposix) thread_file='posix';;
1140 xnks) thread_file='nks';;
1142 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1145 i[34567]86-*-nto-qnx*)
1146 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1147 tmake_file=i386/t-nto
1151 i[34567]86-*-rtems*)
1152 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1153 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1154 tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1156 i[34567]86-*-solaris2*)
1157 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1159 *-*-solaris2.1[0-9]*)
1160 tm_file="${tm_file} sol2-10.h"
1163 tm_file="${tm_file} i386/sol2.h"
1164 tmake_file="t-sol2 i386/t-sol2 t-svr4"
1165 c_target_objs="sol2-c.o"
1166 cxx_target_objs="sol2-c.o"
1168 tm_p_file="${tm_p_file} sol2-protos.h"
1169 if test x$gnu_ld = xyes; then
1170 tmake_file="$tmake_file t-slibgcc-elf-ver"
1171 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1173 tmake_file="$tmake_file t-slibgcc-sld"
1175 if test x$gas = xyes; then
1176 tm_file="usegas.h ${tm_file}"
1178 tm_file="$tm_file tm-dwarf2.h"
1180 *-*-solaris2.1[0-9]*)
1181 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1182 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1183 tmake_file="$tmake_file i386/t-crtstuff i386/t-sol2-10"
1184 need_64bit_hwint=yes
1185 case X"${with_cpu}" in
1186 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1189 if test x$with_cpu_64 = x; then
1194 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1195 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1199 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1200 # part of the base system.
1201 extra_parts="gmon.o crtbegin.o crtend.o"
1204 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1207 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1208 "":yes:* | yes:yes:* )
1211 "":*:yes | yes:*:yes )
1216 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1217 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1220 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1221 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1224 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1225 tmake_file="${tmake_file} i386/t-vxworks"
1229 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1230 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1231 xm_file=i386/xm-cygwin.h
1232 tmake_file="i386/t-cygwin i386/t-cygming"
1233 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1234 extra_options="${extra_options} i386/cygming.opt"
1235 extra_objs="winnt.o winnt-stubs.o"
1236 c_target_objs="cygwin2.o msformat-c.o"
1237 cxx_target_objs="cygwin2.o winnt-cxx.o msformat-c.o"
1238 extra_gcc_objs=cygwin1.o
1239 if test x$enable_threads = xyes; then
1243 i[34567]86-*-mingw* | x86_64-*-mingw*)
1244 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1245 xm_file=i386/xm-mingw32.h
1246 tmake_file="i386/t-cygming i386/t-mingw32"
1247 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1248 extra_options="${extra_options} i386/cygming.opt"
1249 extra_objs="winnt.o winnt-stubs.o"
1250 c_target_objs="msformat-c.o"
1251 cxx_target_objs="winnt-cxx.o msformat-c.o"
1252 default_use_cxa_atexit=yes
1253 case ${enable_threads} in
1256 tmake_file="${tmake_file} i386/t-gthr-win32"
1261 tmake_file="${tmake_file} i386/t-crtfm"
1268 tm_file="${tm_file} i386/crtdll.h"
1270 *mingw32msv* | *mingw*)
1274 i[34567]86-*-interix3*)
1275 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1276 tmake_file="i386/t-interix"
1278 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1279 if test x$enable_threads = xyes ; then
1282 if test x$stabs = xyes ; then
1283 tm_file="${tm_file} dbxcoff.h"
1287 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1288 tmake_file="ia64/t-ia64"
1289 target_cpu_default="0"
1290 if test x$gas = xyes
1292 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1294 if test x$gnu_ld = xyes
1296 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1298 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1301 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1302 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1303 tmake_file="${tmake_file} ia64/t-ia64"
1304 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1307 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1308 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1309 if test x$with_system_libunwind != xyes ; then
1310 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1312 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1313 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1316 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1317 tmake_file="ia64/t-ia64 ia64/t-hpux"
1318 target_cpu_default="MASK_GNU_AS"
1319 case x$enable_threads in
1325 c_target_objs="ia64-c.o"
1326 cxx_target_objs="ia64-c.o"
1327 extra_options="${extra_options} ia64/ilp32.opt"
1330 tm_file="svr4.h elfos.h iq2000/iq2000.h"
1331 tmake_file=iq2000/t-iq2000
1332 out_file=iq2000/iq2000.c
1333 md_file=iq2000/iq2000.md
1336 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1337 extra_parts="crtinit.o crtfini.o"
1340 tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1341 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1344 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1345 # We override the tmake_file for linux -- why?
1346 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1348 if test x$enable_threads = xyes; then
1353 tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1354 # We override the tmake_file for linux -- why?
1355 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1357 if test x$enable_threads = xyes; then
1361 # m68hc11 and m68hc12 share the same machine description.
1362 m68hc11-*-*|m6811-*-*)
1363 tm_file="dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h"
1364 tm_p_file="m68hc11/m68hc11-protos.h"
1365 md_file="m68hc11/m68hc11.md"
1366 out_file="m68hc11/m68hc11.c"
1367 tmake_file="m68hc11/t-m68hc11"
1369 m68hc12-*-*|m6812-*-*)
1370 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h"
1371 tm_p_file="m68hc11/m68hc11-protos.h"
1372 md_file="m68hc11/m68hc11.md"
1373 out_file="m68hc11/m68hc11.c"
1374 tmake_file="m68hc11/t-m68hc11"
1375 extra_options="${extra_options} m68hc11/m68hc11.opt"
1378 default_m68k_cpu=68020
1380 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1381 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1384 default_m68k_cpu=68020
1386 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1387 tm_defines="${tm_defines} MOTOROLA=1"
1388 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1390 m68k-*-elf* | fido-*-elf*)
1393 # Check that $with_cpu makes sense.
1398 echo "Cannot accept --with-cpu=$with_cpu"
1405 default_m68k_cpu=68020
1409 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1410 tm_defines="${tm_defines} MOTOROLA=1"
1411 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1412 # Add multilibs for targets other than fido.
1417 tmake_file="$tmake_file m68k/t-mlibs"
1420 extra_parts="crtbegin.o crtend.o"
1423 default_m68k_cpu=68020
1425 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1426 tm_defines="${tm_defines} MOTOROLA=1"
1429 default_m68k_cpu=68020
1431 # needed to unconfuse gdb
1432 tm_defines="${tm_defines} OBSD_OLD_GAS"
1433 tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1434 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1435 # we need collect2 until our bug is fixed...
1438 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1439 # with uClibc, using the original
1440 # m68k-elf-based ABI
1441 default_m68k_cpu=68020
1443 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
1444 tm_defines="${tm_defines} MOTOROLA=1"
1445 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1447 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1448 # with uClibc, using the new GNU/Linux-style
1450 default_m68k_cpu=68020
1452 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1453 tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
1454 extra_options="${extra_options} linux.opt"
1455 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1457 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1458 # with ELF format using glibc 2
1459 # aka the GNU/Linux C library 6.
1460 default_m68k_cpu=68020
1462 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1463 extra_options="${extra_options} m68k/ieee.opt"
1464 tm_defines="${tm_defines} MOTOROLA=1"
1465 # if not configured with --enable-sjlj-exceptions, bump the
1466 # libgcc version number
1467 if test x$sjlj != x1; then
1468 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1472 default_m68k_cpu=68020
1474 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1475 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1476 tm_defines="${tm_defines} MOTOROLA=1"
1477 extra_parts="crtbegin.o crtend.o"
1480 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1481 tmake_file=mcore/t-mcore
1485 tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1486 tmake_file=mcore/t-mcore-pe
1490 tm_file="elfos.h ${tm_file} mips/iris.h"
1491 tmake_file="mips/t-iris mips/t-slibgcc-irix"
1492 target_cpu_default="MASK_ABICALLS"
1495 tm_file="${tm_file} mips/iris5.h"
1499 tm_file="${tm_file} mips/iris6.h"
1500 tmake_file="${tmake_file} mips/t-iris6"
1501 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1504 if test "x$stabs" = xyes
1506 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1508 if test "x$gnu_ld" = xyes
1510 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1512 case ${enable_threads}:${have_pthread_h} in
1513 "":yes | yes:yes ) thread_file=posix ;;
1517 mips*-*-netbsd*) # NetBSD/mips, either endian.
1518 target_cpu_default="MASK_ABICALLS"
1519 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1522 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1523 tmake_file="${tmake_file} mips/t-linux64"
1524 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1527 test x$with_llsc != x || with_llsc=yes
1529 mips*-*-linux*) # Linux MIPS, either endian.
1530 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1533 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1536 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1538 test x$with_llsc != x || with_llsc=yes
1541 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1542 target_cpu_default="MASK_ABICALLS"
1543 tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1546 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1547 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1551 tm_file="elfos.h ${tm_file} mips/elf.h mips/sde.h"
1552 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1553 case "${with_newlib}" in
1555 # newlib / libgloss.
1558 # MIPS toolkit libraries.
1559 tm_file="$tm_file mips/sdemtk.h"
1560 tmake_file="$tmake_file mips/t-sdemtk"
1561 extra_options="$extra_options mips/sdemtk.opt"
1562 case ${enable_threads} in
1564 thread_file='mipssde'
1571 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1574 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1577 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1581 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1582 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1583 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1584 tm_file="elfos.h ${tm_file} mips/elf.h"
1585 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1588 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1591 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1594 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1598 mipsisa32*-*-elfoabi*)
1599 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1600 tm_file="${tm_file} mips/elfoabi.h"
1602 mipsisa64*-*-elfoabi*)
1603 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1604 tm_file="${tm_file} mips/elfoabi.h"
1607 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1611 mipsisa64sr71k-*-elf*)
1612 tm_file="elfos.h ${tm_file} mips/elf.h"
1613 tmake_file=mips/t-sr71k
1614 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1615 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1617 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1618 tm_file="elfos.h ${tm_file} mips/elf.h"
1619 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1620 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1621 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1623 mips-*-elf* | mipsel-*-elf*)
1624 tm_file="elfos.h ${tm_file} mips/elf.h"
1625 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1627 mips64-*-elf* | mips64el-*-elf*)
1628 tm_file="elfos.h ${tm_file} mips/elf.h"
1629 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1630 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1631 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1633 mips64vr-*-elf* | mips64vrel-*-elf*)
1634 tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1635 tmake_file=mips/t-vr
1637 mips64orion-*-elf* | mips64orionel-*-elf*)
1638 tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1639 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1640 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1641 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1644 tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1645 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1648 tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1649 tmake_file="${tmake_file} mips/t-vxworks"
1651 mipstx39-*-elf* | mipstx39el-*-elf*)
1652 tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1653 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1655 mmix-knuth-mmixware)
1656 need_64bit_hwint=yes
1659 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1660 if test x$stabs = xyes
1662 tm_file="${tm_file} dbx.h"
1667 tm_file="${tm_file} pdp11/2bsd.h"
1672 # port not yet contributed
1673 #powerpc-*-openbsd*)
1674 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1678 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1679 test x$with_cpu != x || cpu_is_64bit=yes
1680 test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1681 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1682 if test x${enable_secureplt} = xyes; then
1683 tm_file="rs6000/secureplt.h ${tm_file}"
1685 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1686 tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1689 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1690 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1691 tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1694 extra_options="${extra_options} rs6000/darwin.opt"
1695 extra_parts="crt2.o"
1697 *-darwin1[0-9]* | *-darwin[8-9]*)
1698 tmake_file="${tmake_file} rs6000/t-darwin8"
1699 tm_file="${tm_file} rs6000/darwin8.h"
1702 tm_file="${tm_file} rs6000/darwin7.h"
1707 extra_headers=altivec.h
1709 powerpc64-*-darwin*)
1710 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1711 extra_options="${extra_options} ${cpu_type}/darwin.opt"
1712 # We're omitting t-darwin8 to avoid building any multilibs
1713 extra_headers=altivec.h
1715 powerpc*-*-freebsd*)
1716 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1717 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1718 extra_options="${extra_options} rs6000/sysv4.opt"
1721 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1722 tmake_file="${tmake_file} rs6000/t-netbsd"
1723 extra_options="${extra_options} rs6000/sysv4.opt"
1726 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1727 extra_options="${extra_options} rs6000/sysv4.opt"
1728 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1730 powerpc-*-eabisimaltivec*)
1731 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1732 extra_options="${extra_options} rs6000/sysv4.opt"
1733 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1736 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1737 extra_options="${extra_options} rs6000/sysv4.opt"
1738 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1741 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1742 extra_options="${extra_options} rs6000/sysv4.opt"
1743 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1745 powerpc-*-eabialtivec*)
1746 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1747 extra_options="${extra_options} rs6000/sysv4.opt"
1748 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1751 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1752 extra_options="${extra_options} rs6000/sysv4.opt"
1753 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1756 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1757 extra_options="${extra_options} rs6000/sysv4.opt"
1758 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1760 powerpc-*-linux*altivec*)
1761 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1762 extra_options="${extra_options} rs6000/sysv4.opt"
1763 tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1765 powerpc-*-linux*spe*)
1766 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1767 extra_options="${extra_options} rs6000/sysv4.opt"
1768 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1770 powerpc-*-linux*paired*)
1771 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/750cl.h"
1772 extra_options="${extra_options} rs6000/sysv4.opt"
1773 tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1776 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1777 extra_options="${extra_options} rs6000/sysv4.opt"
1778 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1779 case ${enable_targets}:${cpu_is_64bit} in
1780 *powerpc64* | all:* | *:yes)
1781 if test x$cpu_is_64bit = xyes; then
1782 tm_file="${tm_file} rs6000/default64.h"
1784 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1785 tmake_file="$tmake_file rs6000/t-linux64"
1786 extra_options="${extra_options} rs6000/linux64.opt"
1789 tm_file="${tm_file} rs6000/linux.h"
1792 if test x${enable_secureplt} = xyes; then
1793 tm_file="rs6000/secureplt.h ${tm_file}"
1796 powerpc-*-gnu-gnualtivec*)
1797 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1798 extra_options="${extra_options} rs6000/sysv4.opt"
1799 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1800 if test x$enable_threads = xyes; then
1805 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1806 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1807 extra_options="${extra_options} rs6000/sysv4.opt"
1808 if test x$enable_threads = xyes; then
1812 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1813 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1814 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1815 extra_options="${extra_options} rs6000/sysv4.opt"
1816 extra_headers=ppc-asm.h
1819 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1820 tmake_file="${tmake_file} rs6000/t-vxworksae"
1823 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1829 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1830 tmake_file="t-lynx rs6000/t-lynx"
1831 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1832 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1833 extra_options="${extra_options} lynx.opt"
1839 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1840 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1841 extra_options="${extra_options} rs6000/sysv4.opt"
1843 powerpcle-*-eabisim*)
1844 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1845 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1846 extra_options="${extra_options} rs6000/sysv4.opt"
1849 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
1850 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1851 extra_options="${extra_options} rs6000/sysv4.opt"
1853 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1854 tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1855 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1856 extra_options="${extra_options} rs6000/aix41.opt"
1861 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1862 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1863 tmake_file=rs6000/t-aix43
1864 extra_options="${extra_options} rs6000/aix64.opt"
1869 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1870 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1871 extra_options="${extra_options} rs6000/aix64.opt"
1872 tmake_file=rs6000/t-aix43
1877 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
1878 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1879 tmake_file=rs6000/t-aix52
1880 extra_options="${extra_options} rs6000/aix64.opt"
1885 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
1886 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h"
1887 tmake_file=rs6000/t-aix52
1888 extra_options="${extra_options} rs6000/aix64.opt"
1891 extra_headers=altivec.h
1893 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
1894 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h"
1895 tmake_file=rs6000/t-aix52
1896 extra_options="${extra_options} rs6000/aix64.opt"
1899 extra_headers=altivec.h
1902 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1903 tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1906 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1907 tm_p_file=s390/s390-protos.h
1908 md_file=s390/s390.md
1909 extra_modes=s390/s390-modes.def
1910 out_file=s390/s390.c
1911 tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1914 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1915 tm_p_file=s390/s390-protos.h
1916 md_file=s390/s390.md
1917 extra_modes=s390/s390-modes.def
1918 out_file=s390/s390.c
1919 extra_parts="crtbeginS.o crtendS.o"
1920 tmake_file="s390/t-crtstuff s390/t-tpf"
1922 extra_options="${extra_options} s390/tpf.opt"
1925 tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
1926 tmake_file=score/t-score-elf
1927 extra_objs="score7.o score3.o"
1929 sh-*-elf* | sh[12346l]*-*-elf* | \
1930 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1931 sh-*-linux* | sh[2346lbe]*-*-linux* | \
1932 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1933 sh64-*-netbsd* | sh64l*-*-netbsd*)
1934 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1935 if test x${with_endian} = x; then
1937 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1938 shbe-*-* | sheb-*-*) with_endian=big,little ;;
1939 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
1940 shl* | sh64l* | sh*-*-linux* | \
1941 sh5l* | sh-superh-elf) with_endian=little,big ;;
1942 sh[1234]*-*-*) with_endian=big ;;
1943 *) with_endian=big,little ;;
1946 case ${with_endian} in
1947 big|little) tmake_file="${tmake_file} sh/t-1e" ;;
1948 big,little|little,big) ;;
1949 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
1951 case ${with_endian} in
1952 little*) tm_file="sh/little.h ${tm_file}" ;;
1954 tm_file="${tm_file} dbxelf.h elfos.h"
1957 *) tm_file="${tm_file} svr4.h" ;;
1959 tm_file="${tm_file} sh/elf.h"
1961 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
1962 tm_file="${tm_file} linux.h sh/linux.h" ;;
1963 sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1964 sh*-superh-elf) if test x$with_libgloss != xno; then
1966 tm_file="${tm_file} sh/newlib.h"
1968 tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
1969 tmake_file="${tmake_file} sh/t-superh"
1970 extra_options="${extra_options} sh/superh.opt" ;;
1971 *) if test x$with_newlib = xyes \
1972 && test x$with_libgloss = xyes; then
1973 tm_file="${tm_file} sh/newlib.h"
1975 tm_file="${tm_file} sh/embed-elf.h" ;;
1979 # SHmedia, 32-bit ABI
1980 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1983 # SHmedia, 64-bit ABI
1984 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1987 tmake_file="${tmake_file} sh/t-netbsd"
1990 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1991 tm_file="${tm_file} sh/sh64.h"
1992 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1995 tmake_file="${tmake_file} sh/t-sh64"
1996 tm_file="${tm_file} sh/sh64.h"
1997 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2000 tmake_file="sh/t-symbian"
2001 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2002 extra_objs="symbian.o"
2003 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2006 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2007 case `echo ${target} | sed 's/e[lb]-/-/'` in
2008 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2009 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2010 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2011 sh4a_single*) sh_cpu_target=sh4a-single ;;
2012 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2013 sh4al) sh_cpu_target=sh4al ;;
2014 sh4a*) sh_cpu_target=sh4a ;;
2015 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2016 sh4_single*) sh_cpu_target=sh4-single ;;
2017 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2018 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2019 sh3e*) sh_cpu_target=sh3e ;;
2020 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2021 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2022 sh2a_single*) sh_cpu_target=sh2a-single ;;
2023 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2024 sh2a*) sh_cpu_target=sh2a ;;
2025 sh2e*) sh_cpu_target=sh2e ;;
2026 sh2*) sh_cpu_target=sh2 ;;
2027 *) sh_cpu_target=sh1 ;;
2029 # did the user say --without-fp ?
2030 if test x$with_fp = xno; then
2031 case ${sh_cpu_target} in
2032 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2034 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2035 sh4*) sh_cpu_target=sh4-nofpu ;;
2036 sh3*) sh_cpu_target=sh3 ;;
2037 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2038 sh2*) sh_cpu_target=sh2 ;;
2039 *) echo --without-fp not available for $target: ignored
2041 tm_defines="$tm_defines STRICT_NOFPU=1"
2043 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2044 case $sh_cpu_default in
2045 sh5-64media-nofpu | sh5-64media | \
2046 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2047 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2048 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2049 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2050 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2051 "") sh_cpu_default=${sh_cpu_target} ;;
2052 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2054 sh_multilibs=${with_multilib_list}
2055 if test x${sh_multilibs} = x ; then
2057 sh64-superh-linux* | \
2058 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2059 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2060 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2061 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2062 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2063 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2065 if test x$with_fp = xno; then
2066 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2069 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2070 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2071 sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2072 for sh_multilib in ${sh_multilibs}; do
2073 case ${sh_multilib} in
2074 sh1 | sh2 | sh2e | sh3 | sh3e | \
2075 sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\
2076 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2077 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2078 sh5-64media | sh5-64media-nofpu | \
2079 sh5-32media | sh5-32media-nofpu | \
2080 sh5-compact | sh5-compact-nofpu)
2081 tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2082 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2085 echo "with_multilib_list=${sh_multilib} not supported."
2090 if test x${enable_incomplete_targets} = xyes ; then
2091 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2095 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2096 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2099 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2100 tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2103 tm_file="${tm_file} dbxcoff.h sh/coff.h"
2106 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2107 extra_options="${extra_options} sparc/long-double-switch.opt"
2110 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2111 extra_options="${extra_options} sparc/little-endian.opt"
2116 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2117 tmake_file="sparc/t-elf sparc/t-crtfm"
2118 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2120 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
2121 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h"
2122 extra_options="${extra_options} sparc/long-double-switch.opt"
2123 tmake_file="${tmake_file} sparc/t-linux"
2124 if test x$enable_targets = xall; then
2125 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2126 tmake_file="${tmake_file} sparc/t-linux64"
2128 tm_file="${tm_file} sparc/linux.h"
2130 tmake_file="${tmake_file} sparc/t-crtfm"
2133 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2134 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2135 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2137 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2138 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2140 *-*-solaris2.1[0-9]*)
2141 tm_file="${tm_file} sol2-10.h"
2144 tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2145 if test x$gnu_ld = xyes; then
2146 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2148 if test x$gas = xyes; then
2149 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2151 tm_file="${tm_file} tm-dwarf2.h"
2152 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2153 if test x$gnu_ld = xyes; then
2154 tmake_file="$tmake_file t-slibgcc-elf-ver"
2156 tmake_file="$tmake_file t-slibgcc-sld"
2158 c_target_objs="sol2-c.o"
2159 cxx_target_objs="sol2-c.o"
2161 tm_p_file="${tm_p_file} sol2-protos.h"
2162 extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2163 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2164 "":yes:* | yes:yes:* ) thread_file=posix ;;
2165 "":*:yes | yes:*:yes ) thread_file=solaris ;;
2169 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2171 *-*-solaris2.1[0-9]*)
2172 tm_file="${tm_file} sol2-10.h"
2175 tm_file="${tm_file} sparc/sol2.h"
2176 if test x$gnu_ld = xyes; then
2177 tm_file="${tm_file} sparc/sol2-gld.h"
2179 if test x$gas = xyes; then
2180 tm_file="${tm_file} sparc/sol2-gas.h"
2182 tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2183 if test x$gnu_ld = xyes; then
2184 tmake_file="$tmake_file t-slibgcc-elf-ver"
2186 tmake_file="$tmake_file t-slibgcc-sld"
2188 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2189 if test x$gnu_ld = xyes; then
2190 tm_file="${tm_file} sparc/sol2-gld-bi.h"
2192 if test x$gas = xyes; then
2193 tm_file="${tm_file} sparc/sol2-gas-bi.h"
2195 tm_file="${tm_file} tm-dwarf2.h"
2196 tmake_file="$tmake_file sparc/t-sol2-64"
2197 test x$with_cpu != x || with_cpu=v9
2198 c_target_objs="sol2-c.o"
2199 cxx_target_objs="sol2-c.o"
2201 tm_p_file="${tm_p_file} sol2-protos.h"
2202 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2203 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2204 "":yes:* | yes:yes:* )
2207 "":*:yes | yes:*:yes )
2213 tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2214 tmake_file="${tmake_file} sparc/t-vxworks"
2217 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2218 extra_options="${extra_options} sparc/little-endian.opt"
2219 tmake_file="${tmake_file} sparc/t-crtfm"
2220 extra_parts="crtbegin.o crtend.o"
2222 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2223 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2224 extra_options="${extra_options} sparc/long-double-switch.opt"
2225 tmake_file="${tmake_file} sparc/t-crtfm"
2226 case "x$with_cpu" in
2228 x) with_cpu=ultrasparc ;;
2229 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2232 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
2233 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h sparc/linux64.h"
2234 extra_options="${extra_options} sparc/long-double-switch.opt"
2235 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2238 tm_file="sparc/biarch64.h ${tm_file}"
2239 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2240 extra_options="${extra_options} sparc/long-double-switch.opt"
2241 tmake_file="${tmake_file} sparc/t-netbsd64"
2244 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2245 tmake_file="spu/t-spu-elf"
2246 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2247 extra_modes=spu/spu-modes.def
2248 c_target_objs="${c_target_objs} spu-c.o"
2249 cxx_target_objs="${cxx_target_objs} spu-c.o"
2252 target_cpu_default="TARGET_CPU_v850e1"
2253 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2254 tm_p_file=v850/v850-protos.h
2255 tmake_file=v850/t-v850e
2256 md_file=v850/v850.md
2257 out_file=v850/v850.c
2258 extra_options="${extra_options} v850/v850.opt"
2259 if test x$stabs = xyes
2261 tm_file="${tm_file} dbx.h"
2264 c_target_objs="v850-c.o"
2265 cxx_target_objs="v850-c.o"
2268 target_cpu_default="TARGET_CPU_v850e"
2269 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2270 tm_p_file=v850/v850-protos.h
2271 tmake_file=v850/t-v850e
2272 md_file=v850/v850.md
2273 out_file=v850/v850.c
2274 extra_options="${extra_options} v850/v850.opt"
2275 if test x$stabs = xyes
2277 tm_file="${tm_file} dbx.h"
2280 c_target_objs="v850-c.o"
2281 cxx_target_objs="v850-c.o"
2284 target_cpu_default="TARGET_CPU_generic"
2285 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2286 tmake_file=v850/t-v850
2287 if test x$stabs = xyes
2289 tm_file="${tm_file} dbx.h"
2292 c_target_objs="v850-c.o"
2293 cxx_target_objs="v850-c.o"
2296 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2299 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2305 tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2309 # For historical reasons, the target files omit the 'x'.
2310 tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2311 tm_p_file=stormy16/stormy16-protos.h
2312 md_file=stormy16/stormy16.md
2313 out_file=stormy16/stormy16.c
2314 extra_options=stormy16/stormy16.opt
2315 tmake_file="stormy16/t-stormy16"
2316 extra_parts="crtbegin.o crtend.o"
2319 tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2320 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2323 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2324 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2327 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2328 tmake_file="${tmake_file} mn10300/t-linux"
2330 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2334 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2335 c_target_objs="m32c-pragma.o"
2336 cxx_target_objs="m32c-pragma.o"
2339 echo "*** Configuration ${target} not supported" 1>&2
2345 i[34567]86-*-linux* | x86_64-*-linux*)
2346 tmake_file="${tmake_file} i386/t-pmm_malloc"
2348 i[34567]86-*-* | x86_64-*-*)
2349 tmake_file="${tmake_file} i386/t-gmm_malloc"
2353 # Support for --with-cpu and related options (and a few unrelated options,
2357 echo "--with-cpu must be passed a value" 1>&2
2362 # If there is no $with_cpu option, try to infer one from ${target}.
2363 # This block sets nothing except for with_cpu.
2364 if test x$with_cpu = x ; then
2373 case ${target_noncanonical} in
2383 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2384 with_cpu=pentium-mmx
2391 i686-*-* | i786-*-*)
2392 case ${target_noncanonical} in
2393 amdfam10-*|barcelona-*)
2396 k8-*|opteron-*|athlon_64-*)
2399 athlon_xp-*|athlon_mp-*|athlon_4-*)
2402 athlon_tbird-*|athlon-*)
2411 pentium3-*|pentium3m-*)
2414 pentium4-*|pentium4m-*)
2438 case ${target_noncanonical} in
2439 amdfam10-*|barcelona-*)
2442 k8-*|opteron-*|athlon_64-*)
2471 frv-*-*linux* | frv400-*-*linux*)
2478 case "$with_arch" in
2480 with_cpu=${default_cf_cpu}
2483 with_cpu=m${default_m68k_cpu}
2491 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2495 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2497 i[34567]86-*-*|x86_64-*-*)
2498 if test x$with_cpu != x; then
2499 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2500 if test x$with_cpu_32 = x; then
2501 with_cpu_32=$with_cpu
2503 if test x$with_cpu_64 = x; then
2504 with_cpu_64=$with_cpu
2513 # Similarly for --with-schedule.
2514 if test x$with_schedule = x; then
2517 # Override default PA8000 scheduling model.
2518 with_schedule=7100LC
2523 # Validate and mark as valid any --with options supported
2524 # by this target. In order to use a particular --with option
2525 # you must list it in supported_defaults; validating the value
2526 # is optional. This case statement should set nothing besides
2527 # supported_defaults.
2532 supported_defaults="cpu tune"
2533 for which in cpu tune; do
2534 eval "val=\$with_$which"
2537 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2538 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2542 echo "Unknown CPU used in --with-$which=$val" 1>&2
2550 supported_defaults="arch cpu float tune fpu abi mode"
2551 for which in cpu tune; do
2552 # See if it matches any of the entries in arm-cores.def
2553 eval "val=\$with_$which"
2554 if [ x"$val" = x ] \
2555 || grep "^ARM_CORE(\"$val\"," \
2556 ${srcdir}/config/arm/arm-cores.def \
2559 new_val=`grep "^ARM_CORE(\"$val\"," \
2560 ${srcdir}/config/arm/arm-cores.def | \
2561 sed -e 's/^[^,]*,[ ]*//' | \
2563 eval "target_${which}_cname=$new_val"
2564 echo "For $val real value is $new_val"
2567 echo "Unknown CPU used in --with-$which=$val" 1>&2
2572 case "$with_arch" in
2574 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2575 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
2576 | armv7 | armv7-a | armv7-r | armv7-m \
2581 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2586 case "$with_float" in
2588 | soft | hard | softfp)
2592 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2599 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon )
2603 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2610 | apcs-gnu | atpcs | aapcs | iwmmxt )
2614 echo "Unknown ABI used in --with-abi=$with_abi"
2619 case "$with_mode" in
2625 echo "Unknown mode used in --with-mode=$with_mode"
2630 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2631 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2636 supported_defaults=cpu
2641 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2647 fido-*-* | m68k*-*-*)
2648 supported_defaults="arch cpu"
2649 case "$with_arch" in
2651 m68k_arch_family="$with_arch"
2654 echo "Invalid --with-arch=$with_arch" 1>&2
2659 # We always have a $with_cpu setting here.
2661 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2662 m68k_cpu_ident=$with_cpu
2665 m68k_cpu_ident=m68020
2666 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2669 m68k_cpu_ident=m68020
2670 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2673 # We need the C identifier rather than the string.
2674 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2675 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2676 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2677 ${srcdir}/config/m68k/m68k-devices.def`
2678 if [ x"$m68k_cpu_ident" = x ] ; then
2679 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2682 with_cpu="mcpu=$with_cpu"
2688 supported_defaults="arch schedule"
2690 case "$with_arch" in
2691 "" | 1.0 | 1.1 | 2.0)
2695 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2700 case "$with_schedule" in
2701 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2705 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2711 i[34567]86-*-* | x86_64-*-*)
2712 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
2713 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
2714 eval "val=\$with_$which"
2717 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2718 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2719 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2720 | athlon-4 | athlon-xp | athlon-mp | geode \
2721 | prescott | pentium-m | pentium4m | pentium3m)
2728 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2736 "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
2740 echo "Unknown CPU given in --with-$which=$val." 1>&2
2748 supported_defaults="abi arch float tune divide llsc"
2750 case ${with_float} in
2755 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2761 "" | 32 | o64 | n32 | 64 | eabi)
2765 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2770 case ${with_divide} in
2771 "" | breaks | traps)
2775 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2780 case ${with_llsc} in
2791 echo "Unknown llsc type used in --with-llsc" 1>&2
2797 powerpc*-*-* | rs6000-*-*)
2798 supported_defaults="cpu float tune"
2800 for which in cpu tune; do
2801 eval "val=\$with_$which"
2803 default32 | default64)
2804 with_which="with_$which"
2808 tm_defines="${tm_defines} CONFIG_PPC405CR"
2809 eval "with_$which=405"
2812 | power | power[23456] | power6x | powerpc | powerpc64 \
2813 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2814 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
2815 | 505 | 601 | 602 | 603 | 603e | ec603e | 604 \
2816 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 | e300c[23] \
2817 | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
2821 echo "Unknown cpu used in --with-$which=$val." 1>&2
2829 supported_defaults="arch mode tune"
2831 for which in arch tune; do
2832 eval "val=\$with_$which"
2834 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
2838 echo "Unknown cpu used in --with-$which=$val." 1>&2
2844 case ${with_mode} in
2849 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2855 sh[123456ble]-*-* | sh-*-*)
2856 supported_defaults="cpu"
2857 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2858 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2861 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2863 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2866 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
2867 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2868 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2869 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2875 supported_defaults="cpu float tune"
2877 for which in cpu tune; do
2878 eval "val=\$with_$which"
2880 "" | sparc | sparcv9 | sparc64 | sparc86x \
2881 | v7 | cypress | v8 | supersparc | sparclite | f930 \
2882 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2883 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
2887 echo "Unknown cpu used in --with-$which=$val" 1>&2
2893 case ${with_float} in
2898 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2905 supported_defaults="arch tune"
2907 for which in arch tune; do
2908 eval "val=\$with_$which"
2910 "" | cell | celledp)
2914 echo "Unknown cpu used in --with-$which=$val." 1>&2
2922 supported_defaults=cpu
2924 "" | v850e | v850e1)
2928 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2935 # Set some miscellaneous flags for particular targets.
2936 target_cpu_default2=
2939 if test x$gas = xyes
2941 target_cpu_default2="MASK_GAS"
2946 if test x$target_cpu_cname = x
2948 target_cpu_default2=TARGET_CPU_generic
2950 target_cpu_default2=TARGET_CPU_$target_cpu_cname
2955 target_cpu_default2="MASK_BIG_SWITCH"
2956 if test x$gas = xyes
2958 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2962 fido*-*-* | m68k*-*-*)
2963 target_cpu_default2=$m68k_cpu_ident
2964 if [ x"$m68k_arch_family" != x ]; then
2965 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
2970 if test x$gnu_ld = xyes
2972 target_cpu_default2="MASK_SPLIT_ADDRESSES"
2976 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2979 if test "x$enable_gofast" = xyes
2981 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2982 tmake_file="mips/t-gofast $tmake_file"
2984 tmake_file="mips/t-mips $tmake_file"
2988 powerpc*-*-* | rs6000-*-*)
2989 # FIXME: The PowerPC port uses the value set at compile time,
2990 # although it's only cosmetic.
2991 if test "x$with_cpu" != x
2993 target_cpu_default2="\\\"$with_cpu\\\""
2995 out_file=rs6000/rs6000.c
2996 c_target_objs="${c_target_objs} rs6000-c.o"
2997 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2998 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3000 if test x$enable_e500_double = xyes
3002 tm_file="$tm_file rs6000/e500-double.h"
3006 sh[123456ble]*-*-* | sh-*-*)
3007 c_target_objs="${c_target_objs} sh-c.o"
3008 cxx_target_objs="${cxx_target_objs} sh-c.o"
3012 # Some standard aliases.
3017 xsparcv9 | xsparc64)
3022 # The SPARC port checks this value at compile-time.
3023 target_cpu_default2="TARGET_CPU_$with_cpu"
3026 # FIXME: The v850 is "special" in that it does not support
3027 # runtime CPU selection, only --with-cpu.
3028 case "x$with_cpu" in
3032 target_cpu_default2="TARGET_CPU_$with_cpu"
3039 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc"
3040 for option in $all_defaults
3042 eval "val=\$with_$option"
3043 if test -n "$val"; then
3044 case " $supported_defaults " in
3048 echo "This target does not support --with-$option." 2>&1
3049 echo "Valid --with options are: $supported_defaults" 2>&1
3056 t="{ \"$option\", \"$val\" }"
3058 t="${t}, { \"$option\", \"$val\" }"
3065 configure_default_options="{ { NULL, NULL} }"
3067 configure_default_options="{ ${t} }"
3070 if test "$target_cpu_default2" != ""
3072 if test "$target_cpu_default" != ""
3074 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3076 target_cpu_default=$target_cpu_default2