1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # gas_flag Either yes or no depending on whether GNU as was
51 # gnu_ld_flag Either yes or no depending on whether GNU ld was
54 # This file sets the following shell variables for use by the
55 # autoconf-generated configure script:
57 # cpu_type The name of the cpu, if different from the first
58 # chunk of the canonical target name.
60 # tm_defines List of target macros to define for all compilations.
62 # tm_file A list of target macro files, if different from
63 # "$cpu_type/$cpu_type.h". Usually it's constructed
64 # per target in a way like this:
65 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
66 # Note that the preferred order is:
67 # - specific target header "${cpu_type}/${cpu_type.h}"
68 # - generic headers like dbxelf.h elfos.h, etc.
69 # - specializing target headers like ${cpu_type.h}/elf.h
70 # This helps to keep OS specific stuff out of the CPU
71 # defining header ${cpu_type}/${cpu_type.h}.
73 # It is possible to include automatically-generated
74 # build-directory files by prefixing them with "./".
75 # All other files should relative to $srcdir/config.
77 # tm_p_file Location of file with declarations for functions
80 # out_file The name of the machine description C support
81 # file, if different from "$cpu_type/$cpu_type.c".
83 # md_file The name of the machine-description file, if
84 # different from "$cpu_type/$cpu_type.md".
86 # tmake_file A list of machine-description-specific
87 # makefile-fragments, if different from
88 # "$cpu_type/t-$cpu_type".
90 # extra_modes The name of the file containing a list of extra
91 # machine modes, if necessary and different from
92 # "$cpu_type/$cpu_type-modes.def".
94 # extra_objs List of extra objects that should be linked into
95 # the compiler proper (cc1, cc1obj, cc1plus)
96 # depending on target.
98 # extra_gcc_objs List of extra objects that should be linked into
99 # the compiler driver (gcc) depending on target.
101 # extra_headers List of used header files from the directory
102 # config/${cpu_type}.
104 # use_gcc_tgmath If set, add tgmath.h to the list of used header
107 # use_gcc_stdint If "wrap", install a version of stdint.h that
108 # wraps the system's copy for hosted compilations;
109 # if "provide", provide a version of systems without
110 # such a system header; otherwise "none", do not
111 # provide such a header at all.
113 # extra_passes List of extra executables compiled for this target
114 # machine, used for compiling from source to object.
116 # extra_parts List of extra object files that should be compiled
117 # for this target machine.
119 # extra_programs Like extra_passes, but these are used when linking.
121 # extra_options List of target-dependent .opt files.
123 # c_target_objs List of extra target-dependent objects that be
124 # linked into the C compiler only.
126 # cxx_target_objs List of extra target-dependent objects that be
127 # linked into the C++ compiler only.
129 # fortran_target_objs List of extra target-dependent objects that be
130 # linked into the fortran compiler only.
132 # target_gtfiles List of extra source files with type information.
134 # xm_defines List of macros to define when compiling for the
137 # xm_file List of files to include when compiling for the
140 # use_collect2 Set to yes or no, depending on whether collect2
143 # target_cpu_default Set to override the default target model.
145 # gdb_needs_out_file_path
146 # Set to yes if gdb needs a dir command with
147 # `dirname $out_file`.
149 # thread_file Set to control which thread package to use.
151 # gas Set to yes or no depending on whether the target
152 # system normally uses GNU as.
154 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
155 # for this target. This is true if this target
156 # supports "long" or "wchar_t" wider than 32 bits,
157 # or BITS_PER_WORD is wider than 32 bits.
158 # The setting made here must match the one made in
159 # other locations such as libcpp/configure.ac
161 # configure_default_options
162 # Set to an initializer for configure_default_options
163 # in configargs.h, based on --with-cpu et cetera.
165 # The following variables are used in each case-construct to build up the
166 # outgoing variables:
168 # gnu_ld Set to yes or no depending on whether the target
169 # system normally uses GNU ld.
187 # Set this to force installation and use of collect2.
189 # Set this to override the default target model.
191 # Set this if gdb needs a dir command with `dirname $out_file`
192 gdb_needs_out_file_path=
193 # Set this to control which thread package will be used.
195 # Reinitialize these from the flag values every loop pass, since some
196 # configure entries modify them.
198 gnu_ld="$gnu_ld_flag"
199 default_use_cxa_atexit=no
203 # Don't carry these over build->host->target. Please.
207 # Obsolete configurations.
210 # if test "x$enable_obsolete" != xyes; then
211 # echo "*** Configuration ${target} is obsolete." >&2
212 # echo "*** Specify --enable-obsolete to build it anyway." >&2
213 # echo "*** Support will be REMOVED in the next major release of GCC," >&2
214 # echo "*** unless a maintainer comes forward." >&2
219 # Unsupported targets list. Do not put an entry in this list unless
220 # it would otherwise be caught by a more permissive pattern. The list
221 # should be in alphabetical order.
224 | i[34567]86-*-go32* \
225 | mips64orion*-*-rtems* \
227 | sparc-hal-solaris2* \
235 | *-*-solaris2.[0-6] \
236 | *-*-solaris2.[0-6].* \
240 echo "*** Configuration ${target} not supported" 1>&2
245 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
246 # updated in each machine entry. Also set default extra_headers for some
249 cpu_type=`echo ${target} | sed 's/-.*$//'`
254 tmake_file=m32c/t-m32c
265 extra_headers="mmintrin.h arm_neon.h"
266 c_target_objs="arm-c.o"
267 cxx_target_objs="arm-c.o"
277 moxie*) cpu_type=moxie
281 extra_headers=math-68881.h
285 c_target_objs="i386-c.o"
286 cxx_target_objs="i386-c.o"
287 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
288 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
289 nmmintrin.h bmmintrin.h mmintrin-common.h
290 wmmintrin.h immintrin.h x86intrin.h avxintrin.h
291 ia32intrin.h cross-stdarg.h"
295 c_target_objs="i386-c.o"
296 cxx_target_objs="i386-c.o"
297 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
298 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
299 nmmintrin.h bmmintrin.h mmintrin-common.h
300 wmmintrin.h immintrin.h x86intrin.h avxintrin.h
301 ia32intrin.h cross-stdarg.h"
305 extra_headers=ia64intrin.h
315 extra_headers=math-68881.h
320 extra_headers="loongson.h"
327 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
330 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell)
353 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
354 sh[123456789lbe]*-*-* | sh-*-*)
360 tm_file=${cpu_type}/${cpu_type}.h
361 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
363 tm_p_file=${cpu_type}/${cpu_type}-protos.h
366 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
368 extra_modes=${cpu_type}/${cpu_type}-modes.def
370 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
372 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
377 tm_file="i386/biarch32.h ${tm_file}"
383 if test "x$enable_cld" = xyes; then
384 tm_defines="${tm_defines} USE_IX86_CLD=1"
386 tm_file="vxworks-dummy.h ${tm_file}"
389 tm_file="i386/biarch64.h ${tm_file}"
390 if test "x$enable_cld" = xyes; then
391 tm_defines="${tm_defines} USE_IX86_CLD=1"
393 tm_file="vxworks-dummy.h ${tm_file}"
397 # On a.out targets, we need to use collect2.
404 # Common parts for widely ported systems.
407 tm_file="${tm_file} darwin.h"
410 tm_file="${tm_file} darwin9.h"
413 tm_file="${tm_file} ${cpu_type}/darwin.h"
414 tm_p_file="${tm_p_file} darwin-protos.h"
415 tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
416 target_gtfiles="\$(srcdir)/config/darwin.c"
417 extra_options="${extra_options} darwin.opt"
418 c_target_objs="${c_target_objs} darwin-c.o"
419 cxx_target_objs="${cxx_target_objs} darwin-c.o"
420 fortran_target_objs="darwin-f.o"
421 extra_objs="darwin.o"
422 extra_gcc_objs="darwin-driver.o"
423 default_use_cxa_atexit=yes
425 case ${enable_threads} in
426 "" | yes | posix) thread_file='posix' ;;
429 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
430 # This is the place-holder for the generic a.out configuration
431 # of FreeBSD. No actual configuration resides here since
432 # there was only ever a bare-bones ix86 configuration for
433 # a.out and it exists solely in the machine-specific section.
434 # This place-holder must exist to avoid dropping into
435 # the generic ELF configuration of FreeBSD (i.e. it must be
436 # ordered before that section).
439 # This is the generic ELF configuration of FreeBSD. Later
440 # machine-specific sections may refine and add to this
443 # Due to tm_file entry ordering issues that vary between cpu
444 # architectures, we only define fbsd_tm_file to allow the
445 # machine-specific section to dictate the final order of all
446 # entries of tm_file with the minor exception that components
447 # of the tm_file set here will always be of the form:
449 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
451 # The machine-specific section should not tamper with this
452 # ordering but may order all other entries of tm_file as it
453 # pleases around the provided core setting.
456 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
457 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
458 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
459 tmake_file="t-slibgcc-elf-ver t-freebsd"
460 case ${enable_threads} in
462 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
466 tmake_file="${tmake_file} t-freebsd-thread"
467 # Before 5.0, FreeBSD can't bind shared libraries to -lc
468 # when "optionally" threaded via weak pthread_* checks.
470 *-*-freebsd[34] | *-*-freebsd[34].*)
471 tmake_file="${tmake_file} t-slibgcc-nolc-override"
476 echo 'Unknown thread configuration for FreeBSD'
480 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
485 default_use_cxa_atexit=yes;;
487 # need_64bit_hwint=yes # system compiler has this for all arch!
490 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
491 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
494 case ${enable_threads} in
495 "" | yes | posix) thread_file='posix' ;;
497 tmake_file="t-slibgcc-elf-ver t-linux"
499 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
502 tmake_file="$tmake_file t-gnu";;
504 # glibc / uclibc switch. uclibc isn't usable for GNU/Hurd and neither for
508 extra_options="$extra_options linux.opt";;
510 tm_defines="$tm_defines OPTION_GLIBC=1";;
514 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
517 tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
520 # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
521 default_use_cxa_atexit=yes
526 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
530 # NetBSD 2.0 and later get POSIX threads enabled by default.
531 # Allow them to be explicitly enabled on any other version.
532 case ${enable_threads} in
535 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
537 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
543 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
547 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
548 # ELF configurations. We will clear extra_parts in the
549 # a.out configurations.
551 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
552 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
556 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
557 # default (unless overridden by --disable-__cxa_atexit).
559 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
560 default_use_cxa_atexit=yes
565 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
566 case ${enable_threads} in
569 tmake_file="${tmake_file} t-openbsd-thread"
573 *-*-openbsd2.*|*-*-openbsd3.[012])
574 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
578 case ${enable_threads} in
579 yes) thread_file='rtems' ;;
589 extra_options="${extra_options} vxworks.opt"
591 case ${enable_threads} in
593 "" | yes | vxworks) thread_file='vxworks' ;;
594 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
598 # Assume that newlib is being used and so __cxa_atexit is provided.
599 default_use_cxa_atexit=yes
605 # Support site-specific machine types.
607 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
608 tm_file=${cpu_type}/$rest.h
609 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
610 then xm_file=${cpu_type}/xm-$rest.h
612 if test -f $srcdir/config/${cpu_type}/t-$rest
613 then tmake_file=${cpu_type}/t-$rest
617 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
618 target_cpu_default="MASK_GAS"
619 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
622 tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
623 target_cpu_default="MASK_GAS"
624 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
627 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
628 target_cpu_default="MASK_GAS"
629 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
630 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
633 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
634 target_cpu_default="MASK_GAS"
635 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
638 tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
639 tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
640 # default x-alpha is only appropriate for dec-osf.
641 target_cpu_default="MASK_GAS"
642 tmake_file="alpha/t-alpha alpha/t-ieee"
645 if test x$stabs = xyes
647 tm_file="${tm_file} dbx.h"
649 if test x$gas != xyes
651 extra_passes="mips-tfile mips-tdump"
654 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
655 tm_file="${tm_file} alpha/osf.h"
656 extra_headers=va_list.h
659 # Define TARGET_SUPPORT_ARCH except on 4.0a.
662 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
666 tm_file="${tm_file} alpha/osf5.h"
667 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
670 case ${enable_threads} in
673 tmake_file="${tmake_file} alpha/t-osf-pthread"
678 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
679 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
680 tmake_file="alpha/t-alpha vms/t-vms vms/t-vms64 alpha/t-vms alpha/t-ieee"
683 install_headers_dir=install-headers-cp
684 extra_options="${extra_options} vms/vms.opt"
687 tm_file="${tm_file} alpha/vms.h"
688 xm_file="alpha/xm-vms.h"
689 tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
692 install_headers_dir=install-headers-cp
693 extra_options="${extra_options} vms/vms.opt"
696 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
697 extra_parts="crtinit.o crtfini.o"
700 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
701 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
704 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
705 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
708 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
709 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
712 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
713 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
717 arm*-*-linux*) # ARM GNU/Linux with ELF
718 tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
721 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
724 tmake_file="${tmake_file} t-linux arm/t-arm"
727 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
728 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
729 # The BPABI long long divmod functions return a 128-bit value in
730 # registers r0-r3. Correctly modeling that requires the use of
733 # The EABI requires the use of __cxa_atexit.
734 default_use_cxa_atexit=yes
737 tmake_file="$tmake_file arm/t-linux"
740 tm_file="$tm_file arm/aout.h arm/arm.h"
741 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
743 arm*-*-uclinux*) # ARM ucLinux
744 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
745 tmake_file="arm/t-arm arm/t-arm-elf"
748 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
749 tmake_file="$tmake_file arm/t-bpabi"
750 # The BPABI long long divmod functions return a 128-bit value in
751 # registers r0-r3. Correctly modeling that requires the use of
754 # The EABI requires the use of __cxa_atexit.
755 default_use_cxa_atexit=yes
757 tm_file="$tm_file arm/aout.h arm/arm.h"
758 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
761 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
762 tmake_file="arm/t-arm arm/t-arm-elf"
763 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
765 arm*-*-eabi* | arm*-*-symbianelf* )
766 # The BPABI long long divmod functions return a 128-bit value in
767 # registers r0-r3. Correctly modeling that requires the use of
770 default_use_cxa_atexit=yes
771 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
772 tmake_file="arm/t-arm arm/t-arm-elf"
775 tm_file="$tm_file arm/eabi.h newlib-stdint.h"
776 tmake_file="${tmake_file} arm/t-bpabi"
777 extra_options="${extra_options} arm/eabi.opt"
781 tm_file="${tm_file} arm/symbian.h"
782 # We do not include t-bpabi for Symbian OS because the system
783 # provides its own implementation of the BPABI functions.
784 tmake_file="${tmake_file} arm/t-symbian"
787 tm_file="${tm_file} arm/aout.h arm/arm.h"
788 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
791 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
792 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
793 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
796 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
797 tmake_file="arm/t-arm arm/t-arm-elf"
798 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
801 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
802 tmake_file="arm/t-arm arm/t-wince-pe"
803 extra_options="${extra_options} arm/pe.opt"
807 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
808 tmake_file="arm/t-arm arm/t-pe"
810 extra_options="${extra_options} arm/pe.opt"
814 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
815 tmake_file="avr/t-avr t-rtems avr/t-rtems"
816 extra_gcc_objs="driver-avr.o avr-devices.o"
817 extra_objs="avr-devices.o"
820 tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
822 extra_gcc_objs="driver-avr.o avr-devices.o"
823 extra_objs="avr-devices.o"
826 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
827 tmake_file=bfin/t-bfin-elf
831 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
832 tmake_file=bfin/t-bfin-uclinux
833 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
834 extra_options="${extra_options} linux.opt"
838 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
839 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
840 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
844 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
845 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
848 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
849 tmake_file=bfin/t-bfin
853 crisv32-*-elf | crisv32-*-none)
854 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
855 tmake_file="cris/t-cris"
856 target_cpu_default=32
858 extra_options="${extra_options} cris/elf.opt"
861 cris-*-elf | cris-*-none)
862 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
863 tmake_file="cris/t-cris cris/t-elfmulti"
865 extra_options="${extra_options} cris/elf.opt"
868 crisv32-*-linux* | cris-*-linux*)
869 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
870 # We need to avoid using t-linux, so override default tmake_file
871 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
872 extra_options="${extra_options} cris/linux.opt"
875 target_cpu_default=10
878 target_cpu_default=32
883 tm_file="elfos.h newlib-stdint.h ${tm_file}"
884 extra_parts="crtbegin.o crtend.o"
888 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
889 tmake_file=fr30/t-fr30
890 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
893 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} frv/frv-abi.h"
897 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
898 linux.h glibc-stdint.h frv/linux.h frv/frv-abi.h"
899 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
904 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
905 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
906 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
911 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
912 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
913 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
914 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
915 extra_options="${extra_options} linux.opt"
918 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
919 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
922 tmake_file="h8300/t-h8300 h8300/t-elf"
923 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
926 target_cpu_default="MASK_PA_11|MASK_PA_20"
927 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
928 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
930 tmake_file="${tmake_file} pa/t-linux64"
935 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
936 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
937 pa/pa32-regs.h pa/pa32-linux.h"
938 tmake_file="${tmake_file} pa/t-linux"
939 # Set the libgcc version number
940 if test x$sjlj = x1; then
941 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
943 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
946 # port not yet contributed.
948 # target_cpu_default="MASK_PA_11"
952 hppa1.1-*-* | hppa2*-*-*)
953 target_cpu_default="MASK_PA_11"
956 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
957 pa/pa-hpux.h pa/pa-hpux10.h"
958 extra_options="${extra_options} pa/pa-hpux.opt"
961 tm_file="${tm_file} pa/pa-hpux1010.h"
962 extra_options="${extra_options} pa/pa-hpux1010.opt"
965 use_gcc_stdint=provide
966 tm_file="${tm_file} hpux-stdint.h"
967 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
968 case ${enable_threads} in
970 if test x$have_pthread_h = xyes ; then
971 tmake_file="${tmake_file} pa/t-dce-thr"
975 tmake_file="${tmake_file} pa/t-dce-thr"
978 # Set the libgcc version number
979 if test x$sjlj = x1; then
980 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
982 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
988 target_cpu_default="MASK_PA_11|MASK_PA_20"
989 if test x$gnu_ld = xyes
991 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
993 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
994 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
998 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
999 extra_options="${extra_options} pa/pa-hpux1111.opt"
1002 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1005 extra_options="${extra_options} pa/pa-hpux.opt \
1006 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1007 need_64bit_hwint=yes
1008 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1009 # Set the libgcc version number
1010 if test x$sjlj = x1; then
1011 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1013 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1015 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1017 case x${enable_threads} in
1025 use_gcc_stdint=provide
1026 tm_file="${tm_file} hpux-stdint.h"
1030 tm_file="${tm_file} hpux-stdint.h"
1034 hppa[12]*-*-hpux11*)
1036 hppa1.1-*-* | hppa2*-*-*)
1037 target_cpu_default="MASK_PA_11"
1040 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1041 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1042 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1045 tm_file="${tm_file} pa/pa-hpux1111.h"
1046 extra_options="${extra_options} pa/pa-hpux1111.opt"
1049 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1050 # Set the libgcc version number
1051 if test x$sjlj = x1; then
1052 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1054 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1056 case x${enable_threads} in
1065 use_gcc_stdint=provide
1066 tm_file="${tm_file} hpux-stdint.h"
1070 tm_file="${tm_file} hpux-stdint.h"
1074 i[34567]86-*-darwin*)
1075 need_64bit_hwint=yes
1077 # This is so that '.../configure && make' doesn't fail due to
1078 # config.guess deciding that the configuration is i386-*-darwin* and
1079 # then this file using that to set --with-cpu=i386 which has no -m64
1081 with_cpu=${with_cpu:-generic}
1082 tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
1085 with_cpu=${with_cpu:-generic}
1086 tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1087 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1090 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1091 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1094 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1095 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1097 i[34567]86-*-freebsd*)
1098 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1101 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1102 tmake_file="${tmake_file} i386/t-crtstuff"
1104 i[34567]86-*-netbsdelf*)
1105 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1107 i[34567]86-*-netbsd*)
1108 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1109 tmake_file="${tmake_file} t-netbsd"
1114 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1115 tmake_file="${tmake_file} i386/t-crtstuff"
1117 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1118 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1119 # needed to unconfuse gdb
1120 tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1121 # we need collect2 until our bug is fixed...
1124 i[34567]86-*-openbsd*)
1125 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1126 tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1130 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1131 # Intel 80386's running GNU/*
1132 # with ELF format using glibc 2
1133 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
1135 i[34567]86-*-linux*)
1136 if test x$enable_targets = xall; then
1137 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1138 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1139 tmake_file="${tmake_file} i386/t-linux64"
1140 need_64bit_hwint=yes
1141 case X"${with_cpu}" in
1142 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1145 if test x$with_cpu_64 = x; then
1150 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1151 echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1156 tm_file="${tm_file} i386/linux.h"
1159 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1160 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1161 i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1162 i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1164 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1166 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1167 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
1168 i386/x86-64.h i386/linux64.h"
1170 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1171 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1173 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1175 i[34567]86-pc-msdosdjgpp*)
1176 xm_file=i386/xm-djgpp.h
1177 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1178 tmake_file="${tmake_file} i386/t-djgpp"
1179 extra_options="${extra_options} i386/djgpp.opt"
1184 i[34567]86-*-lynxos*)
1186 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1187 tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1188 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1189 extra_options="${extra_options} lynx.opt"
1194 i[3456x]86-*-netware*)
1195 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1196 tmake_file="${tmake_file} i386/t-netware"
1197 extra_objs=netware.o
1200 extra_objs="$extra_objs nwld.o"
1201 tm_file="${tm_file} i386/nwld.h"
1202 tmake_file="${tmake_file} i386/t-nwld"
1203 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1206 case x${enable_threads} in
1207 x | xyes | xposix) thread_file='posix';;
1208 xnks) thread_file='nks';;
1210 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1213 i[34567]86-*-nto-qnx*)
1214 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1215 tmake_file="${tmake_file} i386/t-nto"
1219 i[34567]86-*-rtems*)
1220 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1221 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1222 tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1224 i[34567]86-*-solaris2*)
1225 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1227 *-*-solaris2.1[0-9]*)
1228 tm_file="${tm_file} sol2-10.h"
1231 tm_file="${tm_file} i386/sol2.h"
1232 tmake_file="${tmake_file} t-sol2 t-svr4"
1233 c_target_objs="${c_target_objs} sol2-c.o"
1234 cxx_target_objs="${cxx_target_objs} sol2-c.o"
1236 tm_p_file="${tm_p_file} sol2-protos.h"
1237 if test x$gnu_ld = xyes; then
1238 tmake_file="$tmake_file t-slibgcc-elf-ver"
1239 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1241 tmake_file="$tmake_file t-slibgcc-sld"
1243 if test x$gas = xyes; then
1244 tm_file="usegas.h ${tm_file}"
1246 tm_file="$tm_file tm-dwarf2.h"
1248 *-*-solaris2.1[0-9]*)
1249 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1250 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1251 tmake_file="$tmake_file i386/t-sol2-10"
1252 # i386/t-crtstuff only affects libgcc. Its inclusion
1253 # depends on a runtime test and is thus performed in
1254 # libgcc/configure.ac instead.
1255 need_64bit_hwint=yes
1257 case X"${with_cpu}" in
1258 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1261 if test x$with_cpu_64 = x; then
1266 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1267 echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1273 use_gcc_stdint=provide
1276 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1277 "":yes:* | yes:yes:* )
1280 "":*:yes | yes:*:yes )
1285 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1286 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1289 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1290 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1293 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1294 tmake_file="${tmake_file} i386/t-vxworks"
1298 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1299 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1300 xm_file=i386/xm-cygwin.h
1301 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1302 if test x$sjlj = x0; then
1303 tmake_eh_file="i386/t-dw2-eh"
1305 tmake_eh_file="i386/t-sjlj-eh"
1307 tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
1308 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1309 extra_options="${extra_options} i386/cygming.opt"
1310 extra_objs="winnt.o winnt-stubs.o"
1311 c_target_objs="${c_target_objs} cygwin2.o msformat-c.o"
1312 cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o"
1313 extra_gcc_objs=cygwin1.o
1314 if test x$enable_threads = xyes; then
1319 i[34567]86-*-mingw* | x86_64-*-mingw*)
1320 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1321 xm_file=i386/xm-mingw32.h
1322 # This makes the logic if mingw's or the w64 feature set has to be used
1325 tm_file="${tm_file} i386/mingw-w64.h"
1326 tmake_file="${tmake_file} i386/t-mingw-w64"
1329 tmake_file="${tmake_file} i386/t-mingw32"
1332 tm_file="${tm_file} i386/mingw-stdint.h"
1333 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1334 if test x$sjlj = x0; then
1335 tmake_eh_file="i386/t-dw2-eh"
1337 tmake_eh_file="i386/t-sjlj-eh"
1339 tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
1340 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1341 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1344 extra_options="${extra_options} i386/mingw-w64.opt"
1349 extra_objs="winnt.o winnt-stubs.o"
1350 c_target_objs="${c_target_objs} msformat-c.o"
1351 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1352 default_use_cxa_atexit=yes
1354 case ${enable_threads} in
1355 "" | yes | win32) thread_file='win32'
1356 tmake_file="${tmake_file} i386/t-gthr-win32"
1361 tmake_file="${tmake_file} i386/t-crtfm"
1368 tm_file="${tm_file} i386/crtdll.h"
1370 *mingw32msv* | *mingw*)
1374 i[34567]86-*-interix3*)
1375 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1376 tmake_file="${tmake_file} i386/t-interix"
1378 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1379 if test x$enable_threads = xyes ; then
1382 if test x$stabs = xyes ; then
1383 tm_file="${tm_file} dbxcoff.h"
1387 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1388 tmake_file="ia64/t-ia64"
1389 target_cpu_default="0"
1390 if test x$gas = xyes
1392 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1394 if test x$gnu_ld = xyes
1396 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1398 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1401 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1402 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1403 tmake_file="${tmake_file} ia64/t-ia64"
1404 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1407 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1408 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1409 if test x$with_system_libunwind != xyes ; then
1410 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1412 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1413 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1416 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1417 tmake_file="ia64/t-ia64 ia64/t-hpux"
1418 target_cpu_default="MASK_GNU_AS"
1419 case x$enable_threads in
1425 c_target_objs="ia64-c.o"
1426 cxx_target_objs="ia64-c.o"
1427 extra_options="${extra_options} ia64/ilp32.opt"
1429 tm_file="${tm_file} hpux-stdint.h"
1432 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1433 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1434 tmake_file="vms/t-vms vms/t-vms64 ia64/t-ia64 ia64/t-vms"
1435 xmake_file=vms/x-vms
1436 target_cpu_default="0"
1437 if test x$gas = xyes
1439 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1442 install_headers_dir=install-headers-cp
1443 extra_options="${extra_options} vms/vms.opt"
1446 tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
1447 tmake_file=iq2000/t-iq2000
1448 out_file=iq2000/iq2000.c
1449 md_file=iq2000/iq2000.md
1452 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1453 extra_parts="crtinit.o crtfini.o"
1456 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
1457 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1460 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1461 tmake_file="m32r/t-m32r t-rtems"
1462 extra_parts="crtinit.o crtfini.o"
1465 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1466 # We override the tmake_file for linux -- why?
1467 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1469 if test x$enable_threads = xyes; then
1474 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1475 # We override the tmake_file for linux -- why?
1476 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1478 if test x$enable_threads = xyes; then
1482 # m68hc11 and m68hc12 share the same machine description.
1483 m68hc11-*-*|m6811-*-*)
1484 tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1485 tm_p_file="m68hc11/m68hc11-protos.h"
1486 md_file="m68hc11/m68hc11.md"
1487 out_file="m68hc11/m68hc11.c"
1488 tmake_file="m68hc11/t-m68hc11"
1491 m68hc12-*-*|m6812-*-*)
1492 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1493 tm_p_file="m68hc11/m68hc11-protos.h"
1494 md_file="m68hc11/m68hc11.md"
1495 out_file="m68hc11/m68hc11.c"
1496 tmake_file="m68hc11/t-m68hc11"
1497 extra_options="${extra_options} m68hc11/m68hc11.opt"
1500 m68k-*-elf* | fido-*-elf*)
1503 # Check that $with_cpu makes sense.
1508 echo "Cannot accept --with-cpu=$with_cpu"
1515 default_m68k_cpu=68020
1519 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1520 tm_defines="${tm_defines} MOTOROLA=1"
1521 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1522 # Add multilibs for targets other than fido.
1527 tmake_file="$tmake_file m68k/t-mlibs"
1530 extra_parts="crtbegin.o crtend.o"
1533 default_m68k_cpu=68020
1535 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1536 tm_defines="${tm_defines} MOTOROLA=1"
1539 default_m68k_cpu=68020
1541 # needed to unconfuse gdb
1542 tm_defines="${tm_defines} OBSD_OLD_GAS"
1543 tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1544 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1545 # we need collect2 until our bug is fixed...
1548 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1549 # with uClibc, using the original
1550 # m68k-elf-based ABI
1551 default_m68k_cpu=68020
1553 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1554 tm_defines="${tm_defines} MOTOROLA=1"
1555 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1557 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1558 # with uClibc, using the new GNU/Linux-style
1560 default_m68k_cpu=68020
1562 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1563 tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
1564 extra_options="${extra_options} linux.opt"
1565 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1567 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1568 # with ELF format using glibc 2
1569 # aka the GNU/Linux C library 6.
1570 default_m68k_cpu=68020
1572 with_arch=${with_arch:-m68k}
1573 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1574 extra_options="${extra_options} m68k/ieee.opt"
1575 tm_defines="${tm_defines} MOTOROLA=1"
1576 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1577 # if not configured with --enable-sjlj-exceptions, bump the
1578 # libgcc version number
1579 if test x$sjlj != x1; then
1580 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1584 default_m68k_cpu=68020
1586 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1587 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1588 tm_defines="${tm_defines} MOTOROLA=1"
1589 extra_parts="crtbegin.o crtend.o"
1592 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1593 tmake_file=mcore/t-mcore
1597 tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1598 tmake_file=mcore/t-mcore-pe
1603 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1604 tmake_file=mep/t-mep
1605 extra_parts="crtbegin.o crtend.o"
1606 c_target_objs="mep-pragma.o"
1607 cxx_target_objs="mep-pragma.o"
1608 if test -d "${srcdir}/../newlib/libc/include" &&
1609 test "x$with_headers" = x; then
1615 tm_file="elfos.h ${tm_file} mips/iris.h"
1616 tmake_file="mips/t-iris mips/t-slibgcc-irix"
1617 target_cpu_default="MASK_ABICALLS"
1620 tm_file="${tm_file} mips/iris5.h"
1624 tm_file="${tm_file} mips/iris6.h"
1625 tmake_file="${tmake_file} mips/t-iris6"
1626 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1629 if test "x$stabs" = xyes
1631 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1633 if test "x$gnu_ld" = xyes
1635 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1637 case ${enable_threads}:${have_pthread_h} in
1638 "":yes | yes:yes ) thread_file=posix ;;
1641 mips*-*-netbsd*) # NetBSD/mips, either endian.
1642 target_cpu_default="MASK_ABICALLS"
1643 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1645 mips64*-*-linux* | mipsisa64*-*-linux*)
1646 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1647 tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1648 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1650 mips64el-st-linux-gnu)
1651 tm_file="${tm_file} mips/st.h"
1652 tmake_file="${tmake_file} mips/t-st"
1654 mips64octeon*-*-linux*)
1655 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1656 target_cpu_default=MASK_SOFT_FLOAT_ABI
1658 mipsisa64r2*-*-linux*)
1659 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1664 test x$with_llsc != x || with_llsc=yes
1666 mips*-*-linux*) # Linux MIPS, either endian.
1667 tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1668 tmake_file="${tmake_file} mips/t-libgcc-mips16"
1671 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1674 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1676 test x$with_llsc != x || with_llsc=yes
1679 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1680 target_cpu_default="MASK_ABICALLS"
1681 tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1684 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1685 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1689 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1690 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1691 case "${with_newlib}" in
1693 # newlib / libgloss.
1696 # MIPS toolkit libraries.
1697 tm_file="$tm_file mips/sdemtk.h"
1698 tmake_file="$tmake_file mips/t-sdemtk"
1699 extra_options="$extra_options mips/sdemtk.opt"
1700 case ${enable_threads} in
1702 thread_file='mipssde'
1709 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1712 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1715 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1718 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1722 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1723 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1724 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1725 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1726 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1727 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1730 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1733 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1736 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1739 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1743 mipsisa32*-*-elfoabi*)
1744 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1745 tm_file="${tm_file} mips/elfoabi.h"
1747 mipsisa64*-*-elfoabi*)
1748 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1749 tm_file="${tm_file} mips/elfoabi.h"
1752 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1756 mipsisa64sr71k-*-elf*)
1757 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1758 tmake_file=mips/t-sr71k
1759 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1760 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1762 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1763 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1764 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1765 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1766 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1768 mips-*-elf* | mipsel-*-elf*)
1769 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1770 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1772 mips64-*-elf* | mips64el-*-elf*)
1773 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1774 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1775 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1776 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1778 mips64vr-*-elf* | mips64vrel-*-elf*)
1779 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1780 tmake_file=mips/t-vr
1781 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1783 mips64orion-*-elf* | mips64orionel-*-elf*)
1784 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1785 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1786 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1787 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1790 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1791 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1794 tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1795 tmake_file="${tmake_file} mips/t-vxworks"
1797 mipstx39-*-elf* | mipstx39el-*-elf*)
1798 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1799 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1801 mmix-knuth-mmixware)
1802 tm_file="${tm_file} newlib-stdint.h"
1803 need_64bit_hwint=yes
1807 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1808 if test x$stabs = xyes
1810 tm_file="${tm_file} dbx.h"
1816 tm_file="${tm_file} newlib-stdint.h"
1820 tm_file="${tm_file} newlib-stdint.h"
1823 # port not yet contributed
1824 #powerpc-*-openbsd*)
1825 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1829 extra_options="${extra_options} rs6000/darwin.opt"
1830 extra_parts="crt2.o"
1832 *-darwin1[0-9]* | *-darwin[8-9]*)
1833 tmake_file="${tmake_file} rs6000/t-darwin8"
1834 tm_file="${tm_file} rs6000/darwin8.h"
1837 tm_file="${tm_file} rs6000/darwin7.h"
1842 extra_headers=altivec.h
1844 powerpc64-*-darwin*)
1845 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1846 extra_options="${extra_options} ${cpu_type}/darwin.opt"
1847 # We're omitting t-darwin8 to avoid building any multilibs
1848 extra_headers=altivec.h
1850 powerpc*-*-freebsd*)
1851 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1852 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1853 extra_options="${extra_options} rs6000/sysv4.opt"
1856 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1857 tmake_file="${tmake_file} rs6000/t-netbsd"
1858 extra_options="${extra_options} rs6000/sysv4.opt"
1861 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1862 extra_options="${extra_options} rs6000/sysv4.opt"
1863 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1866 powerpc-*-eabisimaltivec*)
1867 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1868 extra_options="${extra_options} rs6000/sysv4.opt"
1869 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1873 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1874 extra_options="${extra_options} rs6000/sysv4.opt"
1875 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1879 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
1880 extra_options="${extra_options} rs6000/sysv4.opt"
1881 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1883 powerpc-*-eabialtivec*)
1884 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1885 extra_options="${extra_options} rs6000/sysv4.opt"
1886 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1889 powerpc-xilinx-eabi*)
1890 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
1891 extra_options="${extra_options} rs6000/sysv4.opt"
1892 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
1896 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1897 extra_options="${extra_options} rs6000/sysv4.opt"
1898 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1902 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1903 extra_options="${extra_options} rs6000/sysv4.opt"
1904 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1906 powerpc-*-linux* | powerpc64-*-linux*)
1907 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1908 extra_options="${extra_options} rs6000/sysv4.opt"
1909 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1912 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
1913 echo "*** Configuration ${target} not supported" 1>&2
1916 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
1920 test x$with_cpu != x || cpu_is_64bit=yes
1924 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
1925 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
1926 if test x$cpu_is_64bit = xyes; then
1927 tm_file="${tm_file} rs6000/default64.h"
1929 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
1930 tmake_file="$tmake_file rs6000/t-linux64"
1931 extra_options="${extra_options} rs6000/linux64.opt"
1934 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
1937 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
1939 powerpc*-*-linux*altivec*)
1940 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
1941 powerpc*-*-linux*spe*)
1942 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
1943 powerpc*-*-linux*paired*)
1944 tm_file="${tm_file} rs6000/750cl.h" ;;
1946 if test x${enable_secureplt} = xyes; then
1947 tm_file="rs6000/secureplt.h ${tm_file}"
1951 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
1952 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1953 tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
1955 powerpc-*-gnu-gnualtivec*)
1956 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
1957 extra_options="${extra_options} rs6000/sysv4.opt"
1958 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
1959 if test x$enable_threads = xyes; then
1964 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
1965 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
1966 extra_options="${extra_options} rs6000/sysv4.opt"
1967 if test x$enable_threads = xyes; then
1971 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1972 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1973 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1974 extra_options="${extra_options} rs6000/sysv4.opt"
1975 extra_headers=ppc-asm.h
1978 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1979 tmake_file="${tmake_file} rs6000/t-vxworksae"
1982 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1988 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1989 tmake_file="t-lynx rs6000/t-lynx"
1990 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1991 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1992 extra_options="${extra_options} lynx.opt"
1998 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
1999 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2000 extra_options="${extra_options} rs6000/sysv4.opt"
2002 powerpcle-*-eabisim*)
2003 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2004 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2005 extra_options="${extra_options} rs6000/sysv4.opt"
2009 tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2010 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2011 extra_options="${extra_options} rs6000/sysv4.opt"
2014 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2015 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2016 tmake_file=rs6000/t-aix43
2017 extra_options="${extra_options} rs6000/aix64.opt"
2020 use_gcc_stdint=provide
2023 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2024 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2025 extra_options="${extra_options} rs6000/aix64.opt"
2026 tmake_file=rs6000/t-aix43
2032 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2033 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2034 tmake_file=rs6000/t-aix52
2035 extra_options="${extra_options} rs6000/aix64.opt"
2041 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2042 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2043 tmake_file=rs6000/t-aix52
2044 extra_options="${extra_options} rs6000/aix64.opt"
2048 extra_headers=altivec.h
2050 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2051 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2052 tmake_file=rs6000/t-aix52
2053 extra_options="${extra_options} rs6000/aix64.opt"
2057 extra_headers=altivec.h
2060 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2061 tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
2064 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2065 tm_p_file=s390/s390-protos.h
2066 md_file=s390/s390.md
2067 extra_modes=s390/s390-modes.def
2068 out_file=s390/s390.c
2069 tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
2072 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2073 tm_p_file=s390/s390-protos.h
2074 md_file=s390/s390.md
2075 extra_modes=s390/s390-modes.def
2076 out_file=s390/s390.c
2077 extra_parts="crtbeginS.o crtendS.o"
2078 tmake_file="s390/t-crtstuff s390/t-tpf"
2080 extra_options="${extra_options} s390/tpf.opt"
2083 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2084 tmake_file=score/t-score-elf
2085 extra_objs="score7.o score3.o"
2087 sh-*-elf* | sh[12346l]*-*-elf* | \
2088 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2089 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2090 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2091 sh64-*-netbsd* | sh64l*-*-netbsd*)
2092 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2093 if test x${with_endian} = x; then
2095 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2096 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2097 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2098 shl* | sh64l* | sh*-*-linux* | \
2099 sh5l* | sh-superh-elf) with_endian=little,big ;;
2100 sh[1234]*-*-*) with_endian=big ;;
2101 *) with_endian=big,little ;;
2104 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2105 # First word : the default endian.
2106 # Second word: the secondary endian (optional).
2107 case ${with_endian} in
2108 big) TM_ENDIAN_CONFIG=mb ;;
2109 little) TM_ENDIAN_CONFIG=ml ;;
2110 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2111 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2112 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2114 case ${with_endian} in
2115 little*) tm_file="sh/little.h ${tm_file}" ;;
2117 tm_file="${tm_file} dbxelf.h elfos.h"
2120 *) tm_file="${tm_file} svr4.h" ;;
2122 tm_file="${tm_file} sh/elf.h"
2124 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2125 tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
2126 sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2127 sh*-superh-elf) if test x$with_libgloss != xno; then
2129 tm_file="${tm_file} sh/newlib.h"
2131 tm_file="${tm_file} sh/embed-elf.h"
2132 tm_file="${tm_file} sh/superh.h"
2133 tmake_file="${tmake_file} sh/t-superh"
2134 extra_options="${extra_options} sh/superh.opt" ;;
2135 *) if test x$with_newlib = xyes \
2136 && test x$with_libgloss = xyes; then
2137 tm_file="${tm_file} sh/newlib.h"
2139 tm_file="${tm_file} sh/embed-elf.h" ;;
2143 # SHmedia, 32-bit ABI
2144 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2147 # SHmedia, 64-bit ABI
2148 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2151 tmake_file="${tmake_file} sh/t-netbsd"
2154 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2155 tm_file="${tm_file} sh/sh64.h"
2156 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2159 tmake_file="${tmake_file} sh/t-sh64"
2160 tm_file="${tm_file} sh/sh64.h"
2161 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2164 tmake_file="sh/t-symbian"
2165 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2166 extra_objs="symbian.o"
2167 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2170 tm_file="${tm_file} newlib-stdint.h"
2173 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2174 case `echo ${target} | sed 's/e[lb]-/-/'` in
2175 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2176 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2177 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2178 sh4a_single*) sh_cpu_target=sh4a-single ;;
2179 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2180 sh4al) sh_cpu_target=sh4al ;;
2181 sh4a*) sh_cpu_target=sh4a ;;
2182 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2183 sh4_single*) sh_cpu_target=sh4-single ;;
2184 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2185 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2186 sh3e*) sh_cpu_target=sh3e ;;
2187 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2188 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2189 sh2a_single*) sh_cpu_target=sh2a-single ;;
2190 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2191 sh2a*) sh_cpu_target=sh2a ;;
2192 sh2e*) sh_cpu_target=sh2e ;;
2193 sh2*) sh_cpu_target=sh2 ;;
2194 *) sh_cpu_target=sh1 ;;
2196 # did the user say --without-fp ?
2197 if test x$with_fp = xno; then
2198 case ${sh_cpu_target} in
2199 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2201 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2202 sh4*) sh_cpu_target=sh4-nofpu ;;
2203 sh3*) sh_cpu_target=sh3 ;;
2204 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2205 sh2*) sh_cpu_target=sh2 ;;
2206 *) echo --without-fp not available for $target: ignored
2208 tm_defines="$tm_defines STRICT_NOFPU=1"
2210 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2211 case $sh_cpu_default in
2212 sh5-64media-nofpu | sh5-64media | \
2213 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2214 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2215 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2216 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2217 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2218 "") sh_cpu_default=${sh_cpu_target} ;;
2219 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2221 sh_multilibs=${with_multilib_list}
2222 if test "$sh_multilibs" = "default" ; then
2224 sh64-superh-linux* | \
2225 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2226 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2227 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2228 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2229 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2230 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2232 if test x$with_fp = xno; then
2233 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2236 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2237 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2238 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2239 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^sh/m/i' -e 's/ sh/ m/gi' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2240 for sh_multilib in ${sh_multilibs}; do
2241 case ${sh_multilib} in
2242 m1 | m2 | m2e | m3 | m3e | \
2243 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2244 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2245 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2246 m5-64media | m5-64media-nofpu | \
2247 m5-32media | m5-32media-nofpu | \
2248 m5-compact | m5-compact-nofpu)
2249 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2250 # It is passed to MULTIILIB_OPTIONS verbatim.
2251 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2252 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2254 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2255 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2256 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2258 echo "with_multilib_list=${sh_multilib} not supported."
2263 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2264 if test x${enable_incomplete_targets} = xyes ; then
2265 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2267 tm_file="$tm_file ./sysroot-suffix.h"
2268 tmake_file="$tmake_file t-sysroot-suffix"
2271 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2272 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2275 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2276 tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2279 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2280 extra_options="${extra_options} sparc/long-double-switch.opt"
2283 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2284 extra_options="${extra_options} sparc/little-endian.opt"
2289 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2290 tmake_file="sparc/t-elf sparc/t-crtfm"
2291 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2293 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
2294 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
2295 extra_options="${extra_options} sparc/long-double-switch.opt"
2296 tmake_file="${tmake_file} sparc/t-linux"
2297 if test x$enable_targets = xall; then
2298 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2299 tmake_file="${tmake_file} sparc/t-linux64"
2301 tm_file="${tm_file} sparc/linux.h"
2303 tmake_file="${tmake_file} sparc/t-crtfm"
2306 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2307 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2308 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2310 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2311 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2313 *-*-solaris2.1[0-9]*)
2314 tm_file="${tm_file} sol2-10.h"
2318 use_gcc_stdint=provide
2321 tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2322 if test x$gnu_ld = xyes; then
2323 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2325 if test x$gas = xyes; then
2326 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2328 tm_file="${tm_file} tm-dwarf2.h"
2329 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2330 if test x$gnu_ld = xyes; then
2331 tmake_file="$tmake_file t-slibgcc-elf-ver"
2333 tmake_file="$tmake_file t-slibgcc-sld"
2335 c_target_objs="sol2-c.o"
2336 cxx_target_objs="sol2-c.o"
2338 tm_p_file="${tm_p_file} sol2-protos.h"
2339 extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2340 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2341 "":yes:* | yes:yes:* ) thread_file=posix ;;
2342 "":*:yes | yes:*:yes ) thread_file=solaris ;;
2346 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2348 *-*-solaris2.1[0-9]*)
2349 tm_file="${tm_file} sol2-10.h"
2353 use_gcc_stdint=provide
2356 tm_file="${tm_file} sparc/sol2.h"
2357 if test x$gnu_ld = xyes; then
2358 tm_file="${tm_file} sparc/sol2-gld.h"
2360 if test x$gas = xyes; then
2361 tm_file="${tm_file} sparc/sol2-gas.h"
2363 tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2364 if test x$gnu_ld = xyes; then
2365 tmake_file="$tmake_file t-slibgcc-elf-ver"
2367 tmake_file="$tmake_file t-slibgcc-sld"
2369 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2370 if test x$gnu_ld = xyes; then
2371 tm_file="${tm_file} sparc/sol2-gld-bi.h"
2373 if test x$gas = xyes; then
2374 tm_file="${tm_file} sparc/sol2-gas-bi.h"
2376 tm_file="${tm_file} tm-dwarf2.h"
2377 tmake_file="$tmake_file sparc/t-sol2-64"
2378 test x$with_cpu != x || with_cpu=v9
2379 c_target_objs="sol2-c.o"
2380 cxx_target_objs="sol2-c.o"
2382 tm_p_file="${tm_p_file} sol2-protos.h"
2383 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2384 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2385 "":yes:* | yes:yes:* )
2388 "":*:yes | yes:*:yes )
2394 tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2395 tmake_file="${tmake_file} sparc/t-vxworks"
2398 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2399 extra_options="${extra_options} sparc/little-endian.opt"
2400 tmake_file="${tmake_file} sparc/t-crtfm"
2401 extra_parts="crtbegin.o crtend.o"
2403 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2404 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2405 extra_options="${extra_options} sparc/long-double-switch.opt"
2406 tmake_file="${tmake_file} sparc/t-crtfm"
2407 case "x$with_cpu" in
2409 x) with_cpu=ultrasparc ;;
2410 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2413 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
2414 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
2415 extra_options="${extra_options} sparc/long-double-switch.opt"
2416 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2419 tm_file="sparc/biarch64.h ${tm_file}"
2420 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2421 extra_options="${extra_options} sparc/long-double-switch.opt"
2422 tmake_file="${tmake_file} sparc/t-netbsd64"
2425 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2426 tmake_file="spu/t-spu-elf"
2427 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2428 extra_modes=spu/spu-modes.def
2429 c_target_objs="${c_target_objs} spu-c.o"
2430 cxx_target_objs="${cxx_target_objs} spu-c.o"
2433 target_cpu_default="TARGET_CPU_v850e1"
2434 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2435 tm_p_file=v850/v850-protos.h
2436 tmake_file=v850/t-v850e
2437 md_file=v850/v850.md
2438 out_file=v850/v850.c
2439 extra_options="${extra_options} v850/v850.opt"
2440 if test x$stabs = xyes
2442 tm_file="${tm_file} dbx.h"
2445 c_target_objs="v850-c.o"
2446 cxx_target_objs="v850-c.o"
2450 target_cpu_default="TARGET_CPU_v850e"
2451 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2452 tm_p_file=v850/v850-protos.h
2453 tmake_file=v850/t-v850e
2454 md_file=v850/v850.md
2455 out_file=v850/v850.c
2456 extra_options="${extra_options} v850/v850.opt"
2457 if test x$stabs = xyes
2459 tm_file="${tm_file} dbx.h"
2462 c_target_objs="v850-c.o"
2463 cxx_target_objs="v850-c.o"
2467 target_cpu_default="TARGET_CPU_generic"
2468 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2469 tmake_file=v850/t-v850
2470 if test x$stabs = xyes
2472 tm_file="${tm_file} dbx.h"
2475 c_target_objs="v850-c.o"
2476 cxx_target_objs="v850-c.o"
2480 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
2481 tmake_file=vax/t-linux
2484 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2487 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2493 tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2497 # For historical reasons, the target files omit the 'x'.
2498 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
2499 tm_p_file=stormy16/stormy16-protos.h
2500 md_file=stormy16/stormy16.md
2501 out_file=stormy16/stormy16.c
2502 extra_options=stormy16/stormy16.opt
2503 tmake_file="stormy16/t-stormy16"
2504 extra_parts="crtbegin.o crtend.o"
2507 tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
2508 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2511 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
2512 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2515 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
2516 tmake_file="${tmake_file} mn10300/t-linux"
2518 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2522 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2523 tmake_file="${tmake_file} t-rtems"
2524 c_target_objs="m32c-pragma.o"
2525 cxx_target_objs="m32c-pragma.o"
2528 tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2529 c_target_objs="m32c-pragma.o"
2530 cxx_target_objs="m32c-pragma.o"
2533 echo "*** Configuration ${target} not supported" 1>&2
2539 i[34567]86-*-linux* | x86_64-*-linux*)
2540 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2542 i[34567]86-*-* | x86_64-*-*)
2543 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2545 powerpc*-*-* | rs6000-*-*)
2546 tm_file="${tm_file} rs6000/option-defaults.h"
2549 # Support for --with-cpu and related options (and a few unrelated options,
2553 echo "--with-cpu must be passed a value" 1>&2
2558 # If there is no $with_cpu option, try to infer one from ${target}.
2559 # This block sets nothing except for with_cpu.
2560 if test x$with_cpu = x ; then
2569 case ${target_noncanonical} in
2579 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2580 with_cpu=pentium-mmx
2587 i686-*-* | i786-*-*)
2588 case ${target_noncanonical} in
2589 amdfam10-*|barcelona-*)
2592 k8-*|opteron-*|athlon_64-*)
2595 athlon_xp-*|athlon_mp-*|athlon_4-*)
2598 athlon_tbird-*|athlon-*)
2607 pentium3-*|pentium3m-*)
2610 pentium4-*|pentium4m-*)
2634 case ${target_noncanonical} in
2635 amdfam10-*|barcelona-*)
2638 k8-*|opteron-*|athlon_64-*)
2667 frv-*-*linux* | frv400-*-*linux*)
2674 case "$with_arch" in
2676 with_cpu=${default_cf_cpu}
2679 with_cpu=m${default_m68k_cpu}
2687 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2691 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2693 i[34567]86-*-*|x86_64-*-*)
2694 if test x$with_cpu != x; then
2695 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2696 if test x$with_cpu_32 = x; then
2697 with_cpu_32=$with_cpu
2699 if test x$with_cpu_64 = x; then
2700 with_cpu_64=$with_cpu
2709 # Similarly for --with-schedule.
2710 if test x$with_schedule = x; then
2713 # Override default PA8000 scheduling model.
2714 with_schedule=7100LC
2719 # Validate and mark as valid any --with options supported
2720 # by this target. In order to use a particular --with option
2721 # you must list it in supported_defaults; validating the value
2722 # is optional. This case statement should set nothing besides
2723 # supported_defaults.
2728 supported_defaults="cpu tune"
2729 for which in cpu tune; do
2730 eval "val=\$with_$which"
2733 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2734 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2738 echo "Unknown CPU used in --with-$which=$val" 1>&2
2746 supported_defaults="arch cpu float tune fpu abi mode"
2747 for which in cpu tune; do
2748 # See if it matches any of the entries in arm-cores.def
2749 eval "val=\$with_$which"
2750 if [ x"$val" = x ] \
2751 || grep "^ARM_CORE(\"$val\"," \
2752 ${srcdir}/config/arm/arm-cores.def \
2755 new_val=`grep "^ARM_CORE(\"$val\"," \
2756 ${srcdir}/config/arm/arm-cores.def | \
2757 sed -e 's/^[^,]*,[ ]*//' | \
2759 eval "target_${which}_cname=$new_val"
2760 echo "For $val real value is $new_val"
2763 echo "Unknown CPU used in --with-$which=$val" 1>&2
2768 case "$with_arch" in
2770 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2771 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
2772 | armv7 | armv7-a | armv7-r | armv7-m \
2777 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2782 case "$with_float" in
2784 | soft | hard | softfp)
2788 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2795 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon )
2799 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2806 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
2810 echo "Unknown ABI used in --with-abi=$with_abi"
2815 case "$with_mode" in
2821 echo "Unknown mode used in --with-mode=$with_mode"
2826 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2827 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2832 supported_defaults=cpu
2837 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2843 fido-*-* | m68k*-*-*)
2844 supported_defaults="arch cpu"
2845 case "$with_arch" in
2847 m68k_arch_family="$with_arch"
2850 echo "Invalid --with-arch=$with_arch" 1>&2
2855 # We always have a $with_cpu setting here.
2857 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2858 m68k_cpu_ident=$with_cpu
2861 m68k_cpu_ident=m68020
2862 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2865 m68k_cpu_ident=m68020
2866 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2869 # We need the C identifier rather than the string.
2870 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2871 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2872 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2873 ${srcdir}/config/m68k/m68k-devices.def`
2874 if [ x"$m68k_cpu_ident" = x ] ; then
2875 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2878 with_cpu="mcpu=$with_cpu"
2884 supported_defaults="arch schedule"
2886 case "$with_arch" in
2887 "" | 1.0 | 1.1 | 2.0)
2891 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2896 case "$with_schedule" in
2897 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2901 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2907 i[34567]86-*-* | x86_64-*-*)
2908 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
2909 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
2910 eval "val=\$with_$which"
2913 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2914 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2915 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2916 | athlon-4 | athlon-xp | athlon-mp | geode \
2917 | prescott | pentium-m | pentium4m | pentium3m)
2924 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2932 "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | atom | generic)
2936 echo "Unknown CPU given in --with-$which=$val." 1>&2
2944 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
2946 case ${with_float} in
2951 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2957 "" | 32 | o64 | n32 | 64 | eabi)
2961 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2966 case ${with_divide} in
2967 "" | breaks | traps)
2971 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2976 case ${with_llsc} in
2987 echo "Unknown llsc type used in --with-llsc" 1>&2
2992 case ${with_mips_plt} in
2997 with_mips_plt=no-plt
3002 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3007 case ${with_synci} in
3012 # No is the default.
3016 echo "Unknown synci type used in --with-synci" 1>&2
3022 powerpc*-*-* | rs6000-*-*)
3023 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3025 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3026 eval "val=\$with_$which"
3028 default32 | default64)
3033 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3037 with_which="with_$which"
3041 tm_defines="${tm_defines} CONFIG_PPC405CR"
3042 eval "with_$which=405"
3045 | power | power[234567] | power6x | powerpc | powerpc64 \
3046 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3047 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3048 | 505 | 601 | 602 | 603 | 603e | ec603e | 604 \
3049 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3050 | e300c[23] | 854[08] | e500mc \
3051 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3055 echo "Unknown cpu used in --with-$which=$val." 1>&2
3063 supported_defaults="arch mode tune"
3065 for which in arch tune; do
3066 eval "val=\$with_$which"
3068 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
3072 echo "Unknown cpu used in --with-$which=$val." 1>&2
3078 case ${with_mode} in
3083 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3089 sh[123456ble]-*-* | sh-*-*)
3090 supported_defaults="cpu"
3091 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3092 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3095 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3097 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3100 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3101 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3102 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3103 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3109 supported_defaults="cpu float tune"
3111 for which in cpu tune; do
3112 eval "val=\$with_$which"
3114 "" | sparc | sparcv9 | sparc64 | sparc86x \
3115 | v7 | cypress | v8 | supersparc | sparclite | f930 \
3116 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3117 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3121 echo "Unknown cpu used in --with-$which=$val" 1>&2
3127 case ${with_float} in
3132 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3139 supported_defaults="arch tune"
3141 for which in arch tune; do
3142 eval "val=\$with_$which"
3144 "" | cell | celledp)
3148 echo "Unknown cpu used in --with-$which=$val." 1>&2
3156 supported_defaults=cpu
3158 "" | v850e | v850e1)
3162 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3169 # Set some miscellaneous flags for particular targets.
3170 target_cpu_default2=
3173 if test x$gas = xyes
3175 target_cpu_default2="MASK_GAS"
3180 if test x$target_cpu_cname = x
3182 target_cpu_default2=TARGET_CPU_generic
3184 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3189 target_cpu_default2="MASK_BIG_SWITCH"
3190 if test x$gas = xyes
3192 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3196 fido*-*-* | m68k*-*-*)
3197 target_cpu_default2=$m68k_cpu_ident
3198 if [ x"$m68k_arch_family" != x ]; then
3199 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3203 i[34567]86-*-darwin* | x86_64-*-darwin*)
3204 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3206 i[34567]86-*-linux* | x86_64-*-linux* | i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
3207 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3209 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3210 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3213 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3217 if test x$gnu_ld = xyes
3219 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3223 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3226 if test "x$enable_gofast" = xyes
3228 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3229 tmake_file="mips/t-gofast $tmake_file"
3231 tmake_file="mips/t-mips $tmake_file"
3235 powerpc*-*-* | rs6000-*-*)
3236 # FIXME: The PowerPC port uses the value set at compile time,
3237 # although it's only cosmetic.
3238 if test "x$with_cpu" != x
3240 target_cpu_default2="\\\"$with_cpu\\\""
3242 out_file=rs6000/rs6000.c
3243 c_target_objs="${c_target_objs} rs6000-c.o"
3244 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3245 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3247 if test x$enable_e500_double = xyes
3249 tm_file="$tm_file rs6000/e500-double.h"
3253 sh[123456ble]*-*-* | sh-*-*)
3254 c_target_objs="${c_target_objs} sh-c.o"
3255 cxx_target_objs="${cxx_target_objs} sh-c.o"
3259 # Some standard aliases.
3264 xsparcv9 | xsparc64)
3269 # The SPARC port checks this value at compile-time.
3270 target_cpu_default2="TARGET_CPU_$with_cpu"
3273 # FIXME: The v850 is "special" in that it does not support
3274 # runtime CPU selection, only --with-cpu.
3275 case "x$with_cpu" in
3279 target_cpu_default2="TARGET_CPU_$with_cpu"
3286 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3287 for option in $all_defaults
3289 eval "val=\$with_"`echo $option | sed s/-/_/g`
3290 if test -n "$val"; then
3291 case " $supported_defaults " in
3295 echo "This target does not support --with-$option." 2>&1
3296 echo "Valid --with options are: $supported_defaults" 2>&1
3303 t="{ \"$option\", \"$val\" }"
3305 t="${t}, { \"$option\", \"$val\" }"
3312 configure_default_options="{ { NULL, NULL} }"
3314 configure_default_options="{ ${t} }"
3317 if test "$target_cpu_default2" != ""
3319 if test "$target_cpu_default" != ""
3321 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3323 target_cpu_default=$target_cpu_default2