1 /* Definitions of target machine for GNU compiler, for Sun SPARC.
2 Copyright (C) 1987, 1988, 1989, 1992, 1994, 1995, 1996, 1997, 1998, 1999
3 Free Software Foundation, Inc.
4 Contributed by Michael Tiemann (tiemann@cygnus.com).
5 64 bit SPARC V9 support by Michael Tiemann, Jim Wilson, and Doug Evans,
8 This file is part of GNU CC.
10 GNU CC is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2, or (at your option)
15 GNU CC is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with GNU CC; see the file COPYING. If not, write to
22 the Free Software Foundation, 59 Temple Place - Suite 330,
23 Boston, MA 02111-1307, USA. */
25 /* Note that some other tm.h files include this one and then override
26 whatever definitions are necessary. */
28 /* Specify this in a cover file to provide bi-architecture (32/64) support. */
29 /* #define SPARC_BI_ARCH */
31 /* Macro used later in this file to determine default architecture. */
32 #define DEFAULT_ARCH32_P ((TARGET_DEFAULT & MASK_64BIT) == 0)
34 /* TARGET_ARCH{32,64} are the main macros to decide which of the two
35 architectures to compile for. We allow targets to choose compile time or
38 #if defined(__sparcv9) || defined(__arch64__)
39 #define TARGET_ARCH32 0
41 #define TARGET_ARCH32 1
45 #define TARGET_ARCH32 (! TARGET_64BIT)
47 #define TARGET_ARCH32 (DEFAULT_ARCH32_P)
48 #endif /* SPARC_BI_ARCH */
49 #endif /* IN_LIBGCC2 */
50 #define TARGET_ARCH64 (! TARGET_ARCH32)
52 /* Code model selection.
53 -mcmodel is used to select the v9 code model.
54 Different code models aren't supported for v7/8 code.
56 TARGET_CM_32: 32 bit address space, top 32 bits = 0,
57 pointers are 32 bits. Note that this isn't intended
60 TARGET_CM_MEDLOW: 32 bit address space, top 32 bits = 0,
61 avoid generating %uhi and %ulo terms,
64 TARGET_CM_MEDMID: 64 bit address space.
65 The executable must be in the low 16 TB of memory.
66 This corresponds to the low 44 bits, and the %[hml]44
67 relocs are used. The text segment has a maximum size
70 TARGET_CM_MEDANY: 64 bit address space.
71 The text and data segments have a maximum size of 31
72 bits and may be located anywhere. The maximum offset
73 from any instruction to the label _GLOBAL_OFFSET_TABLE_
76 TARGET_CM_EMBMEDANY: 64 bit address space.
77 The text and data segments have a maximum size of 31 bits
78 and may be located anywhere. Register %g4 contains
79 the start address of the data segment.
90 /* Value of -mcmodel specified by user. */
91 extern const char *sparc_cmodel_string;
93 extern enum cmodel sparc_cmodel;
95 /* V9 code model selection. */
96 #define TARGET_CM_MEDLOW (sparc_cmodel == CM_MEDLOW)
97 #define TARGET_CM_MEDMID (sparc_cmodel == CM_MEDMID)
98 #define TARGET_CM_MEDANY (sparc_cmodel == CM_MEDANY)
99 #define TARGET_CM_EMBMEDANY (sparc_cmodel == CM_EMBMEDANY)
101 #define SPARC_DEFAULT_CMODEL CM_32
103 /* This is call-clobbered in the normal ABI, but is reserved in the
104 home grown (aka upward compatible) embedded ABI. */
105 #define EMBMEDANY_BASE_REG "%g4"
107 /* Values of TARGET_CPU_DEFAULT, set via -D in the Makefile,
108 and specified by the user via --with-cpu=foo.
109 This specifies the cpu implementation, not the architecture size. */
110 /* Note that TARGET_CPU_v9 is assumed to start the list of 64-bit
112 #define TARGET_CPU_sparc 0
113 #define TARGET_CPU_v7 0 /* alias for previous */
114 #define TARGET_CPU_sparclet 1
115 #define TARGET_CPU_sparclite 2
116 #define TARGET_CPU_v8 3 /* generic v8 implementation */
117 #define TARGET_CPU_supersparc 4
118 #define TARGET_CPU_hypersparc 5
119 #define TARGET_CPU_sparc86x 6
120 #define TARGET_CPU_sparclite86x 6
121 #define TARGET_CPU_v9 7 /* generic v9 implementation */
122 #define TARGET_CPU_sparcv9 7 /* alias */
123 #define TARGET_CPU_sparc64 7 /* alias */
124 #define TARGET_CPU_ultrasparc 8
126 #if TARGET_CPU_DEFAULT == TARGET_CPU_v9 \
127 || TARGET_CPU_DEFAULT == TARGET_CPU_ultrasparc
129 #define CPP_CPU32_DEFAULT_SPEC ""
130 #define ASM_CPU32_DEFAULT_SPEC ""
132 #if TARGET_CPU_DEFAULT == TARGET_CPU_v9
133 /* ??? What does Sun's CC pass? */
134 #define CPP_CPU64_DEFAULT_SPEC "-D__sparc_v9__"
135 /* ??? It's not clear how other assemblers will handle this, so by default
136 use GAS. Sun's Solaris assembler recognizes -xarch=v8plus, but this case
137 is handled in sol2.h. */
138 #define ASM_CPU64_DEFAULT_SPEC "-Av9"
140 #if TARGET_CPU_DEFAULT == TARGET_CPU_ultrasparc
141 #define CPP_CPU64_DEFAULT_SPEC "-D__sparc_v9__"
142 #define ASM_CPU64_DEFAULT_SPEC "-Av9a"
147 #define CPP_CPU64_DEFAULT_SPEC ""
148 #define ASM_CPU64_DEFAULT_SPEC ""
150 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparc \
151 || TARGET_CPU_DEFAULT == TARGET_CPU_v8
152 #define CPP_CPU32_DEFAULT_SPEC ""
153 #define ASM_CPU32_DEFAULT_SPEC ""
156 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparclet
157 #define CPP_CPU32_DEFAULT_SPEC "-D__sparclet__"
158 #define ASM_CPU32_DEFAULT_SPEC "-Asparclet"
161 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparclite
162 #define CPP_CPU32_DEFAULT_SPEC "-D__sparclite__"
163 #define ASM_CPU32_DEFAULT_SPEC "-Asparclite"
166 #if TARGET_CPU_DEFAULT == TARGET_CPU_supersparc
167 #define CPP_CPU32_DEFAULT_SPEC "-D__supersparc__ -D__sparc_v8__"
168 #define ASM_CPU32_DEFAULT_SPEC ""
171 #if TARGET_CPU_DEFAULT == TARGET_CPU_hypersparc
172 #define CPP_CPU32_DEFAULT_SPEC "-D__hypersparc__ -D__sparc_v8__"
173 #define ASM_CPU32_DEFAULT_SPEC ""
176 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparclite86x
177 #define CPP_CPU32_DEFAULT_SPEC "-D__sparclite86x__"
178 #define ASM_CPU32_DEFAULT_SPEC "-Asparclite"
183 #if !defined(CPP_CPU32_DEFAULT_SPEC) || !defined(CPP_CPU64_DEFAULT_SPEC)
184 Unrecognized value in TARGET_CPU_DEFAULT.
189 #define CPP_CPU_DEFAULT_SPEC \
190 (DEFAULT_ARCH32_P ? "\
191 %{m64:" CPP_CPU64_DEFAULT_SPEC "} \
192 %{!m64:" CPP_CPU32_DEFAULT_SPEC "} \
194 %{m32:" CPP_CPU32_DEFAULT_SPEC "} \
195 %{!m32:" CPP_CPU64_DEFAULT_SPEC "} \
197 #define ASM_CPU_DEFAULT_SPEC \
198 (DEFAULT_ARCH32_P ? "\
199 %{m64:" ASM_CPU64_DEFAULT_SPEC "} \
200 %{!m64:" ASM_CPU32_DEFAULT_SPEC "} \
202 %{m32:" ASM_CPU32_DEFAULT_SPEC "} \
203 %{!m32:" ASM_CPU64_DEFAULT_SPEC "} \
206 #else /* !SPARC_BI_ARCH */
208 #define CPP_CPU_DEFAULT_SPEC (DEFAULT_ARCH32_P ? CPP_CPU32_DEFAULT_SPEC : CPP_CPU64_DEFAULT_SPEC)
209 #define ASM_CPU_DEFAULT_SPEC (DEFAULT_ARCH32_P ? ASM_CPU32_DEFAULT_SPEC : ASM_CPU64_DEFAULT_SPEC)
211 #endif /* !SPARC_BI_ARCH */
213 /* Names to predefine in the preprocessor for this target machine.
214 ??? It would be nice to not include any subtarget specific values here,
215 however there's no way to portably provide subtarget values to
216 CPP_PREFINES. Also, -D values in CPP_SUBTARGET_SPEC don't get turned into
217 foo, __foo and __foo__. */
219 #define CPP_PREDEFINES "-Dsparc -Dsun -Dunix -Asystem(unix) -Asystem(bsd)"
221 /* Define macros to distinguish architectures. */
223 /* Common CPP definitions used by CPP_SPEC amongst the various targets
224 for handling -mcpu=xxx switches. */
225 #define CPP_CPU_SPEC "\
227 %{msparclite:-D__sparclite__} \
228 %{mf930:-D__sparclite__} %{mf934:-D__sparclite__} \
229 %{mv8:-D__sparc_v8__} \
230 %{msupersparc:-D__supersparc__ -D__sparc_v8__} \
231 %{mcpu=sparclet:-D__sparclet__} %{mcpu=tsc701:-D__sparclet__} \
232 %{mcpu=sparclite:-D__sparclite__} \
233 %{mcpu=f930:-D__sparclite__} %{mcpu=f934:-D__sparclite__} \
234 %{mcpu=v8:-D__sparc_v8__} \
235 %{mcpu=supersparc:-D__supersparc__ -D__sparc_v8__} \
236 %{mcpu=hypersparc:-D__hypersparc__ -D__sparc_v8__} \
237 %{mcpu=sparclite86x:-D__sparclite86x__} \
238 %{mcpu=v9:-D__sparc_v9__} \
239 %{mcpu=ultrasparc:-D__sparc_v9__} \
240 %{!mcpu*:%{!mcypress:%{!msparclite:%{!mf930:%{!mf934:%{!mv8:%{!msupersparc:%(cpp_cpu_default)}}}}}}} \
243 /* ??? The GCC_NEW_VARARGS macro is now obsolete, because gcc always uses
244 the right varags.h file when bootstrapping. */
245 /* ??? It's not clear what value we want to use for -Acpu/machine for
246 sparc64 in 32 bit environments, so for now we only use `sparc64' in
247 64 bit environments. */
251 #define CPP_ARCH32_SPEC "-D__SIZE_TYPE__=unsigned\\ int -D__PTRDIFF_TYPE__=int \
252 -D__GCC_NEW_VARARGS__ -Acpu(sparc) -Amachine(sparc)"
253 #define CPP_ARCH64_SPEC "-D__SIZE_TYPE__=long\\ unsigned\\ int -D__PTRDIFF_TYPE__=long\\ int \
254 -D__arch64__ -Acpu(sparc64) -Amachine(sparc64)"
258 #define CPP_ARCH32_SPEC "-D__GCC_NEW_VARARGS__ -Acpu(sparc) -Amachine(sparc)"
259 #define CPP_ARCH64_SPEC "-D__arch64__ -Acpu(sparc64) -Amachine(sparc64)"
263 #define CPP_ARCH_DEFAULT_SPEC \
264 (DEFAULT_ARCH32_P ? CPP_ARCH32_SPEC : CPP_ARCH64_SPEC)
266 #define CPP_ARCH_SPEC "\
267 %{m32:%(cpp_arch32)} \
268 %{m64:%(cpp_arch64)} \
269 %{!m32:%{!m64:%(cpp_arch_default)}} \
272 /* Macros to distinguish endianness. */
273 #define CPP_ENDIAN_SPEC "\
274 %{mlittle-endian:-D__LITTLE_ENDIAN__} \
275 %{mlittle-endian-data:-D__LITTLE_ENDIAN_DATA__}"
277 /* Macros to distinguish the particular subtarget. */
278 #define CPP_SUBTARGET_SPEC ""
280 #define CPP_SPEC "%(cpp_cpu) %(cpp_arch) %(cpp_endian) %(cpp_subtarget)"
282 /* Prevent error on `-sun4' and `-target sun4' options. */
283 /* This used to translate -dalign to -malign, but that is no good
284 because it can't turn off the usual meaning of making debugging dumps. */
285 /* Translate old style -m<cpu> into new style -mcpu=<cpu>.
286 ??? Delete support for -m<cpu> for 2.9. */
289 %{sun4:} %{target:} \
290 %{mcypress:-mcpu=cypress} \
291 %{msparclite:-mcpu=sparclite} %{mf930:-mcpu=f930} %{mf934:-mcpu=f934} \
292 %{mv8:-mcpu=v8} %{msupersparc:-mcpu=supersparc} \
295 /* Override in target specific files. */
296 #define ASM_CPU_SPEC "\
297 %{mcpu=sparclet:-Asparclet} %{mcpu=tsc701:-Asparclet} \
298 %{msparclite:-Asparclite} \
299 %{mf930:-Asparclite} %{mf934:-Asparclite} \
300 %{mcpu=sparclite:-Asparclite} \
301 %{mcpu=sparclite86x:-Asparclite} \
302 %{mcpu=f930:-Asparclite} %{mcpu=f934:-Asparclite} \
303 %{mv8plus:-Av8plus} \
305 %{mcpu=ultrasparc:%{!mv8plus:-Av9a}} \
306 %{!mcpu*:%{!mcypress:%{!msparclite:%{!mf930:%{!mf934:%{!mv8:%{!msupersparc:%(asm_cpu_default)}}}}}}} \
309 /* Word size selection, among other things.
310 This is what GAS uses. Add %(asm_arch) to ASM_SPEC to enable. */
312 #define ASM_ARCH32_SPEC "-32"
313 #ifdef HAVE_AS_REGISTER_PSEUDO_OP
314 #define ASM_ARCH64_SPEC "-64 -no-undeclared-regs"
316 #define ASM_ARCH64_SPEC "-64"
318 #define ASM_ARCH_DEFAULT_SPEC \
319 (DEFAULT_ARCH32_P ? ASM_ARCH32_SPEC : ASM_ARCH64_SPEC)
321 #define ASM_ARCH_SPEC "\
322 %{m32:%(asm_arch32)} \
323 %{m64:%(asm_arch64)} \
324 %{!m32:%{!m64:%(asm_arch_default)}} \
327 /* Special flags to the Sun-4 assembler when using pipe for input. */
330 %| %{R} %{!pg:%{!p:%{fpic:-k} %{fPIC:-k}}} %{keep-local-as-symbols:-L} \
334 #define LIB_SPEC "%{!shared:%{!p:%{!pg:-lc}}%{p:-lc_p}%{pg:-lc_p} %{g:-lg}}"
336 /* Provide required defaults for linker -e and -d switches. */
339 "%{!shared:%{!nostdlib:%{!r*:%{!e*:-e start}}} -dc -dp} %{static:-Bstatic} \
340 %{assert*} %{shared:%{!mimpure-text:-assert pure-text}}"
342 /* This macro defines names of additional specifications to put in the specs
343 that can be used in various specifications like CC1_SPEC. Its definition
344 is an initializer with a subgrouping for each command option.
346 Each subgrouping contains a string constant, that defines the
347 specification name, and a string constant that used by the GNU CC driver
350 Do not define this macro if it does not need to do anything. */
352 #define EXTRA_SPECS \
353 { "cpp_cpu", CPP_CPU_SPEC }, \
354 { "cpp_cpu_default", CPP_CPU_DEFAULT_SPEC }, \
355 { "cpp_arch32", CPP_ARCH32_SPEC }, \
356 { "cpp_arch64", CPP_ARCH64_SPEC }, \
357 { "cpp_arch_default", CPP_ARCH_DEFAULT_SPEC },\
358 { "cpp_arch", CPP_ARCH_SPEC }, \
359 { "cpp_endian", CPP_ENDIAN_SPEC }, \
360 { "cpp_subtarget", CPP_SUBTARGET_SPEC }, \
361 { "asm_cpu", ASM_CPU_SPEC }, \
362 { "asm_cpu_default", ASM_CPU_DEFAULT_SPEC }, \
363 { "asm_arch32", ASM_ARCH32_SPEC }, \
364 { "asm_arch64", ASM_ARCH64_SPEC }, \
365 { "asm_arch_default", ASM_ARCH_DEFAULT_SPEC },\
366 { "asm_arch", ASM_ARCH_SPEC }, \
367 SUBTARGET_EXTRA_SPECS
369 #define SUBTARGET_EXTRA_SPECS
372 #define NO_BUILTIN_PTRDIFF_TYPE
373 #define NO_BUILTIN_SIZE_TYPE
375 #define PTRDIFF_TYPE (TARGET_ARCH64 ? "long int" : "int")
376 #define SIZE_TYPE (TARGET_ARCH64 ? "long unsigned int" : "unsigned int")
378 /* ??? This should be 32 bits for v9 but what can we do? */
379 #define WCHAR_TYPE "short unsigned int"
380 #define WCHAR_TYPE_SIZE 16
381 #define MAX_WCHAR_TYPE_SIZE 16
383 /* Show we can debug even without a frame pointer. */
384 #define CAN_DEBUG_WITHOUT_FP
386 /* To make profiling work with -f{pic,PIC}, we need to emit the profiling
387 code into the rtl. Also, if we are profiling, we cannot eliminate
388 the frame pointer (because the return address will get smashed). */
390 #define OVERRIDE_OPTIONS \
392 if (profile_flag || profile_block_flag || profile_arc_flag) \
396 const char *pic_string = (flag_pic == 1) ? "-fpic" : "-fPIC";\
397 warning ("%s and profiling conflict: disabling %s", \
398 pic_string, pic_string); \
401 flag_omit_frame_pointer = 0; \
403 sparc_override_options (); \
404 SUBTARGET_OVERRIDE_OPTIONS; \
407 /* This is meant to be redefined in the host dependent files. */
408 #define SUBTARGET_OVERRIDE_OPTIONS
410 /* These compiler options take an argument. We ignore -target for now. */
412 #define WORD_SWITCH_TAKES_ARG(STR) \
413 (DEFAULT_WORD_SWITCH_TAKES_ARG (STR) \
414 || !strcmp (STR, "target") || !strcmp (STR, "assert"))
416 /* Print subsidiary information on the compiler version in use. */
418 #define TARGET_VERSION fprintf (stderr, " (sparc)");
420 /* Generate DBX debugging information. */
422 #define DBX_DEBUGGING_INFO
424 /* Run-time compilation parameters selecting different hardware subsets. */
426 extern int target_flags;
428 /* Nonzero if we should generate code to use the fpu. */
430 #define TARGET_FPU (target_flags & MASK_FPU)
432 /* Nonzero if we should use FUNCTION_EPILOGUE. Otherwise, we
433 use fast return insns, but lose some generality. */
434 #define MASK_EPILOGUE 2
435 #define TARGET_EPILOGUE (target_flags & MASK_EPILOGUE)
437 /* Nonzero if we should assume that double pointers might be unaligned.
438 This can happen when linking gcc compiled code with other compilers,
439 because the ABI only guarantees 4 byte alignment. */
440 #define MASK_UNALIGNED_DOUBLES 4
441 #define TARGET_UNALIGNED_DOUBLES (target_flags & MASK_UNALIGNED_DOUBLES)
443 /* Nonzero means that we should generate code for a v8 sparc. */
445 #define TARGET_V8 (target_flags & MASK_V8)
447 /* Nonzero means that we should generate code for a sparclite.
448 This enables the sparclite specific instructions, but does not affect
449 whether FPU instructions are emitted. */
450 #define MASK_SPARCLITE 0x10
451 #define TARGET_SPARCLITE (target_flags & MASK_SPARCLITE)
453 /* Nonzero if we're compiling for the sparclet. */
454 #define MASK_SPARCLET 0x20
455 #define TARGET_SPARCLET (target_flags & MASK_SPARCLET)
457 /* Nonzero if we're compiling for v9 sparc.
458 Note that v9's can run in 32 bit mode so this doesn't necessarily mean
459 the word size is 64. */
461 #define TARGET_V9 (target_flags & MASK_V9)
463 /* Non-zero to generate code that uses the instructions deprecated in
464 the v9 architecture. This option only applies to v9 systems. */
465 /* ??? This isn't user selectable yet. It's used to enable such insns
466 on 32 bit v9 systems and for the moment they're permanently disabled
467 on 64 bit v9 systems. */
468 #define MASK_DEPRECATED_V8_INSNS 0x80
469 #define TARGET_DEPRECATED_V8_INSNS (target_flags & MASK_DEPRECATED_V8_INSNS)
471 /* Mask of all CPU selection flags. */
473 (MASK_V8 + MASK_SPARCLITE + MASK_SPARCLET + MASK_V9 + MASK_DEPRECATED_V8_INSNS)
475 /* Non-zero means don't pass `-assert pure-text' to the linker. */
476 #define MASK_IMPURE_TEXT 0x100
477 #define TARGET_IMPURE_TEXT (target_flags & MASK_IMPURE_TEXT)
479 /* Nonzero means that we should generate code using a flat register window
480 model, i.e. no save/restore instructions are generated, which is
481 compatible with normal sparc code.
482 The frame pointer is %i7 instead of %fp. */
483 #define MASK_FLAT 0x200
484 #define TARGET_FLAT (target_flags & MASK_FLAT)
486 /* Nonzero means use the registers that the Sparc ABI reserves for
487 application software. This must be the default to coincide with the
488 setting in FIXED_REGISTERS. */
489 #define MASK_APP_REGS 0x400
490 #define TARGET_APP_REGS (target_flags & MASK_APP_REGS)
492 /* Option to select how quad word floating point is implemented.
493 When TARGET_HARD_QUAD is true, we use the hardware quad instructions.
494 Otherwise, we use the SPARC ABI quad library functions. */
495 #define MASK_HARD_QUAD 0x800
496 #define TARGET_HARD_QUAD (target_flags & MASK_HARD_QUAD)
498 /* Non-zero on little-endian machines. */
499 /* ??? Little endian support currently only exists for sparclet-aout and
500 sparc64-elf configurations. May eventually want to expand the support
501 to all targets, but for now it's kept local to only those two. */
502 #define MASK_LITTLE_ENDIAN 0x1000
503 #define TARGET_LITTLE_ENDIAN (target_flags & MASK_LITTLE_ENDIAN)
505 /* 0x2000, 0x4000 are unused */
507 /* Nonzero if pointers are 64 bits.
508 At the moment it must follow architecture size flag. */
509 #define MASK_PTR64 0x8000
510 #define TARGET_PTR64 (target_flags & MASK_PTR64)
512 /* Nonzero if generating code to run in a 64 bit environment.
513 This is intended to only be used by TARGET_ARCH{32,64} as they are the
514 mechanism used to control compile time or run time selection. */
515 #define MASK_64BIT 0x10000
516 #define TARGET_64BIT (target_flags & MASK_64BIT)
518 /* 0x20000,0x40000 unused */
520 /* Non-zero means use a stack bias of 2047. Stack offsets are obtained by
521 adding 2047 to %sp. This option is for v9 only and is the default. */
522 #define MASK_STACK_BIAS 0x80000
523 #define TARGET_STACK_BIAS (target_flags & MASK_STACK_BIAS)
525 /* 0x100000,0x200000 unused */
527 /* Non-zero means -m{,no-}fpu was passed on the command line. */
528 #define MASK_FPU_SET 0x400000
529 #define TARGET_FPU_SET (target_flags & MASK_FPU_SET)
531 /* Use the UltraSPARC Visual Instruction Set extensions. */
532 #define MASK_VIS 0x1000000
533 #define TARGET_VIS (target_flags & MASK_VIS)
535 /* Compile for Solaris V8+. 32 bit Solaris preserves the high bits of
536 the current out and global registers and Linux 2.2+ as well. */
537 #define MASK_V8PLUS 0x2000000
538 #define TARGET_V8PLUS (target_flags & MASK_V8PLUS)
540 /* Force a the fastest alignment on structures to take advantage of
542 #define MASK_FASTER_STRUCTS 0x4000000
543 #define TARGET_FASTER_STRUCTS (target_flags & MASK_FASTER_STRUCTS)
545 /* Use IEEE quad long double. */
546 #define MASK_LONG_DOUBLE_128 0x8000000
547 #define TARGET_LONG_DOUBLE_128 (target_flags & MASK_LONG_DOUBLE_128)
549 /* TARGET_HARD_MUL: Use hardware multiply instructions but not %y.
550 TARGET_HARD_MUL32: Use hardware multiply instructions with rd %y
551 to get high 32 bits. False in V8+ or V9 because multiply stores
552 a 64 bit result in a register. */
554 #define TARGET_HARD_MUL32 \
555 ((TARGET_V8 || TARGET_SPARCLITE \
556 || TARGET_SPARCLET || TARGET_DEPRECATED_V8_INSNS) \
557 && ! TARGET_V8PLUS && TARGET_ARCH32)
559 #define TARGET_HARD_MUL \
560 (TARGET_V8 || TARGET_SPARCLITE || TARGET_SPARCLET \
561 || TARGET_DEPRECATED_V8_INSNS || TARGET_V8PLUS)
564 /* Macro to define tables used to set the flags.
565 This is a list in braces of pairs in braces,
566 each pair being { "NAME", VALUE }
567 where VALUE is the bits to set or minus the bits to clear.
568 An empty string NAME is used to identify the default VALUE. */
570 #define TARGET_SWITCHES \
571 { {"fpu", MASK_FPU | MASK_FPU_SET, "Use hardware fp" }, \
572 {"no-fpu", -MASK_FPU, "Do not use hardware fp" }, \
573 {"no-fpu", MASK_FPU_SET, NULL, }, \
574 {"hard-float", MASK_FPU | MASK_FPU_SET, "Use hardware fp" }, \
575 {"soft-float", -MASK_FPU, "Do not use hardware fp" }, \
576 {"soft-float", MASK_FPU_SET, NULL }, \
577 {"epilogue", MASK_EPILOGUE, "Use FUNCTION_EPILOGUE" }, \
578 {"no-epilogue", -MASK_EPILOGUE, "Do not use FUNCTION_EPILOGUE" }, \
579 {"unaligned-doubles", MASK_UNALIGNED_DOUBLES, "Assume possible double misalignment" },\
580 {"no-unaligned-doubles", -MASK_UNALIGNED_DOUBLES, "Assume all doubles are aligned" }, \
581 {"impure-text", MASK_IMPURE_TEXT, "Pass -assert pure-text to linker" }, \
582 {"no-impure-text", -MASK_IMPURE_TEXT, "Do not pass -assert pure-text to linker" }, \
583 {"flat", MASK_FLAT, "Use flat register window model" }, \
584 {"no-flat", -MASK_FLAT, "Do not use flat register window model" }, \
585 {"app-regs", MASK_APP_REGS, "Use ABI reserved registers" }, \
586 {"no-app-regs", -MASK_APP_REGS, "Do not use ABI reserved registers" }, \
587 {"hard-quad-float", MASK_HARD_QUAD, "Use hardware quad fp instructions" }, \
588 {"soft-quad-float", -MASK_HARD_QUAD, "Do not use hardware quad fp instructions" }, \
589 {"v8plus", MASK_V8PLUS, "Compile for v8plus ABI" }, \
590 {"no-v8plus", -MASK_V8PLUS, "Do not compile for v8plus ABI" }, \
591 {"vis", MASK_VIS, "Utilize Visual Instruction Set" }, \
592 {"no-vis", -MASK_VIS, "Do not utilize Visual Instruction Set" }, \
593 /* ??? These are deprecated, coerced to -mcpu=. Delete in 2.9. */ \
594 {"cypress", 0, "Optimize for Cypress processors" }, \
595 {"sparclite", 0, "Optimize for SparcLite processors" }, \
596 {"f930", 0, "Optimize for F930 processors" }, \
597 {"f934", 0, "Optimize for F934 processors" }, \
598 {"v8", 0, "Use V8 Sparc ISA" }, \
599 {"supersparc", 0, "Optimize for SuperSparc processors" }, \
600 /* End of deprecated options. */ \
601 {"ptr64", MASK_PTR64, "Pointers are 64-bit" }, \
602 {"ptr32", -MASK_PTR64, "Pointers are 32-bit" }, \
603 {"32", -MASK_64BIT, "Use 32-bit ABI" }, \
604 {"64", MASK_64BIT, "Use 64-bit ABI" }, \
605 {"stack-bias", MASK_STACK_BIAS, "Use stack bias" }, \
606 {"no-stack-bias", -MASK_STACK_BIAS, "Do not use stack bias" }, \
607 {"faster-structs", MASK_FASTER_STRUCTS, "Use structs on stronger alignment for double-word copies" }, \
608 {"no-faster-structs", -MASK_FASTER_STRUCTS, "Do not use structs on stronger alignment for double-word copies" }, \
610 { "", TARGET_DEFAULT, ""}}
612 /* MASK_APP_REGS must always be the default because that's what
613 FIXED_REGISTERS is set to and -ffixed- is processed before
614 CONDITIONAL_REGISTER_USAGE is called (where we process -mno-app-regs). */
615 #define TARGET_DEFAULT (MASK_APP_REGS + MASK_EPILOGUE + MASK_FPU)
617 /* This is meant to be redefined in target specific files. */
618 #define SUBTARGET_SWITCHES
621 These must match the values for the cpu attribute in sparc.md. */
622 enum processor_type {
626 PROCESSOR_SUPERSPARC,
630 PROCESSOR_HYPERSPARC,
631 PROCESSOR_SPARCLITE86X,
638 /* This is set from -m{cpu,tune}=xxx. */
639 extern enum processor_type sparc_cpu;
641 /* Recast the cpu class to be the cpu attribute.
642 Every file includes us, but not every file includes insn-attr.h. */
643 #define sparc_cpu_attr ((enum attr_cpu) sparc_cpu)
645 /* This macro is similar to `TARGET_SWITCHES' but defines names of
646 command options that have values. Its definition is an
647 initializer with a subgrouping for each command option.
649 Each subgrouping contains a string constant, that defines the
650 fixed part of the option name, and the address of a variable.
651 The variable, type `char *', is set to the variable part of the
652 given option if the fixed part matches. The actual option name
653 is made by appending `-m' to the specified name.
655 Here is an example which defines `-mshort-data-NUMBER'. If the
656 given option is `-mshort-data-512', the variable `m88k_short_data'
657 will be set to the string `"512"'.
659 extern char *m88k_short_data;
660 #define TARGET_OPTIONS { { "short-data-", &m88k_short_data } } */
662 #define TARGET_OPTIONS \
664 { "cpu=", &sparc_select[1].string, "Use features of and schedule code for given CPU" }, \
665 { "tune=", &sparc_select[2].string, "Schedule code for given CPU" }, \
666 { "cmodel=", &sparc_cmodel_string, "Use given Sparc code model" }, \
670 /* This is meant to be redefined in target specific files. */
671 #define SUBTARGET_OPTIONS
673 /* sparc_select[0] is reserved for the default cpu. */
674 struct sparc_cpu_select
682 extern struct sparc_cpu_select sparc_select[];
684 /* target machine storage layout */
686 /* Define for cross-compilation to a sparc target with no TFmode from a host
687 with a different float format (e.g. VAX). */
688 #define REAL_ARITHMETIC
690 /* Define this if most significant bit is lowest numbered
691 in instructions that operate on numbered bit-fields. */
692 #define BITS_BIG_ENDIAN 1
694 /* Define this if most significant byte of a word is the lowest numbered. */
695 #define BYTES_BIG_ENDIAN 1
697 /* Define this if most significant word of a multiword number is the lowest
699 #define WORDS_BIG_ENDIAN 1
701 /* Define this to set the endianness to use in libgcc2.c, which can
702 not depend on target_flags. */
703 #if defined (__LITTLE_ENDIAN__) || defined(__LITTLE_ENDIAN_DATA__)
704 #define LIBGCC2_WORDS_BIG_ENDIAN 0
706 #define LIBGCC2_WORDS_BIG_ENDIAN 1
709 /* number of bits in an addressable storage unit */
710 #define BITS_PER_UNIT 8
712 /* Width in bits of a "word", which is the contents of a machine register.
713 Note that this is not necessarily the width of data type `int';
714 if using 16-bit ints on a 68000, this would still be 32.
715 But on a machine with 16-bit registers, this would be 16. */
716 #define BITS_PER_WORD (TARGET_ARCH64 ? 64 : 32)
717 #define MAX_BITS_PER_WORD 64
719 /* Width of a word, in units (bytes). */
720 #define UNITS_PER_WORD (TARGET_ARCH64 ? 8 : 4)
721 #define MIN_UNITS_PER_WORD 4
723 /* Now define the sizes of the C data types. */
725 #define SHORT_TYPE_SIZE 16
726 #define INT_TYPE_SIZE 32
727 #define LONG_TYPE_SIZE (TARGET_ARCH64 ? 64 : 32)
728 #define LONG_LONG_TYPE_SIZE 64
729 #define FLOAT_TYPE_SIZE 32
730 #define DOUBLE_TYPE_SIZE 64
732 #if defined (SPARC_BI_ARCH)
733 #define MAX_LONG_TYPE_SIZE 64
737 /* ??? This does not work in SunOS 4.x, so it is not enabled here.
738 Instead, it is enabled in sol2.h, because it does work under Solaris. */
739 /* Define for support of TFmode long double and REAL_ARITHMETIC.
740 Sparc ABI says that long double is 4 words. */
741 #define LONG_DOUBLE_TYPE_SIZE 128
744 /* Width in bits of a pointer.
745 See also the macro `Pmode' defined below. */
746 #define POINTER_SIZE (TARGET_PTR64 ? 64 : 32)
748 /* A macro to update MODE and UNSIGNEDP when an object whose type
749 is TYPE and which has the specified mode and signedness is to be
750 stored in a register. This macro is only called when TYPE is a
752 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
754 && GET_MODE_CLASS (MODE) == MODE_INT \
755 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
760 /* Define this macro if the promotion described by PROMOTE_MODE
761 should also be done for outgoing function arguments. */
762 /* This is only needed for TARGET_ARCH64, but since PROMOTE_MODE is a no-op
763 for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test
765 #define PROMOTE_FUNCTION_ARGS
767 /* Define this macro if the promotion described by PROMOTE_MODE
768 should also be done for the return value of functions.
769 If this macro is defined, FUNCTION_VALUE must perform the same
770 promotions done by PROMOTE_MODE. */
771 /* This is only needed for TARGET_ARCH64, but since PROMOTE_MODE is a no-op
772 for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test
774 #define PROMOTE_FUNCTION_RETURN
776 /* Define this macro if the promotion described by PROMOTE_MODE
777 should _only_ be performed for outgoing function arguments or
778 function return values, as specified by PROMOTE_FUNCTION_ARGS
779 and PROMOTE_FUNCTION_RETURN, respectively. */
780 /* This is only needed for TARGET_ARCH64, but since PROMOTE_MODE is a no-op
781 for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test
782 for this value. For TARGET_ARCH64 we need it, as we don't have instructions
783 for arithmetic operations which do zero/sign extension at the same time,
784 so without this we end up with a srl/sra after every assignment to an
785 user variable, which means very very bad code. */
786 #define PROMOTE_FOR_CALL_ONLY
788 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
789 #define PARM_BOUNDARY (TARGET_ARCH64 ? 64 : 32)
791 /* Boundary (in *bits*) on which stack pointer should be aligned. */
792 #define STACK_BOUNDARY (TARGET_ARCH64 ? 128 : 64)
794 /* ALIGN FRAMES on double word boundaries */
796 #define SPARC_STACK_ALIGN(LOC) \
797 (TARGET_ARCH64 ? (((LOC)+15) & ~15) : (((LOC)+7) & ~7))
799 /* Allocation boundary (in *bits*) for the code of a function. */
800 #define FUNCTION_BOUNDARY 32
802 /* Alignment of field after `int : 0' in a structure. */
803 #define EMPTY_FIELD_BOUNDARY (TARGET_ARCH64 ? 64 : 32)
805 /* Every structure's size must be a multiple of this. */
806 #define STRUCTURE_SIZE_BOUNDARY 8
808 /* A bitfield declared as `int' forces `int' alignment for the struct. */
809 #define PCC_BITFIELD_TYPE_MATTERS 1
811 /* No data type wants to be aligned rounder than this. */
812 #define BIGGEST_ALIGNMENT (TARGET_ARCH64 ? 128 : 64)
814 /* The best alignment to use in cases where we have a choice. */
815 #define FASTEST_ALIGNMENT 64
817 /* Define this macro as an expression for the alignment of a structure
818 (given by STRUCT as a tree node) if the alignment computed in the
819 usual way is COMPUTED and the alignment explicitly specified was
822 The default is to use SPECIFIED if it is larger; otherwise, use
823 the smaller of COMPUTED and `BIGGEST_ALIGNMENT' */
824 #define ROUND_TYPE_ALIGN(STRUCT, COMPUTED, SPECIFIED) \
825 (TARGET_FASTER_STRUCTS ? \
826 ((TREE_CODE (STRUCT) == RECORD_TYPE \
827 || TREE_CODE (STRUCT) == UNION_TYPE \
828 || TREE_CODE (STRUCT) == QUAL_UNION_TYPE) \
829 && TYPE_FIELDS (STRUCT) != 0 \
830 ? MAX (MAX ((COMPUTED), (SPECIFIED)), BIGGEST_ALIGNMENT) \
831 : MAX ((COMPUTED), (SPECIFIED))) \
832 : MAX ((COMPUTED), (SPECIFIED)))
834 /* Make strings word-aligned so strcpy from constants will be faster. */
835 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
836 ((TREE_CODE (EXP) == STRING_CST \
837 && (ALIGN) < FASTEST_ALIGNMENT) \
838 ? FASTEST_ALIGNMENT : (ALIGN))
840 /* Make arrays of chars word-aligned for the same reasons. */
841 #define DATA_ALIGNMENT(TYPE, ALIGN) \
842 (TREE_CODE (TYPE) == ARRAY_TYPE \
843 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
844 && (ALIGN) < FASTEST_ALIGNMENT ? FASTEST_ALIGNMENT : (ALIGN))
846 /* Set this nonzero if move instructions will actually fail to work
847 when given unaligned data. */
848 #define STRICT_ALIGNMENT 1
850 /* Things that must be doubleword aligned cannot go in the text section,
851 because the linker fails to align the text section enough!
852 Put them in the data section. This macro is only used in this file. */
853 #define MAX_TEXT_ALIGN 32
855 /* This forces all variables and constants to the data section when PIC.
856 This is because the SunOS 4 shared library scheme thinks everything in
857 text is a function, and patches the address to point to a loader stub. */
858 /* This is defined to zero for every system which doesn't use the a.out object
860 #ifndef SUNOS4_SHARED_LIBRARIES
861 #define SUNOS4_SHARED_LIBRARIES 0
864 /* This is defined differently for v9 in a cover file. */
865 #define SELECT_SECTION(T,RELOC) \
867 if (TREE_CODE (T) == VAR_DECL) \
869 if (TREE_READONLY (T) && ! TREE_SIDE_EFFECTS (T) \
870 && DECL_INITIAL (T) \
871 && (DECL_INITIAL (T) == error_mark_node \
872 || TREE_CONSTANT (DECL_INITIAL (T))) \
873 && DECL_ALIGN (T) <= MAX_TEXT_ALIGN \
874 && ! (flag_pic && ((RELOC) || SUNOS4_SHARED_LIBRARIES))) \
879 else if (TREE_CODE (T) == CONSTRUCTOR) \
881 if (flag_pic && ((RELOC) || SUNOS4_SHARED_LIBRARIES)) \
884 else if (TREE_CODE_CLASS (TREE_CODE (T)) == 'c') \
886 if ((TREE_CODE (T) == STRING_CST && flag_writable_strings) \
887 || TYPE_ALIGN (TREE_TYPE (T)) > MAX_TEXT_ALIGN \
888 || (flag_pic && ((RELOC) || SUNOS4_SHARED_LIBRARIES))) \
895 /* Use text section for a constant
896 unless we need more alignment than that offers. */
897 /* This is defined differently for v9 in a cover file. */
898 #define SELECT_RTX_SECTION(MODE, X) \
900 if (GET_MODE_BITSIZE (MODE) <= MAX_TEXT_ALIGN \
901 && ! (flag_pic && (symbolic_operand ((X), (MODE)) || SUNOS4_SHARED_LIBRARIES))) \
907 /* Standard register usage. */
909 /* Number of actual hardware registers.
910 The hardware registers are assigned numbers for the compiler
911 from 0 to just below FIRST_PSEUDO_REGISTER.
912 All registers that the compiler knows about must be given numbers,
913 even those that are not normally considered general registers.
915 SPARC has 32 integer registers and 32 floating point registers.
916 64 bit SPARC has 32 additional fp regs, but the odd numbered ones are not
917 accessible. We still account for them to simplify register computations
918 (eg: in CLASS_MAX_NREGS). There are also 4 fp condition code registers, so
920 Register 100 is used as the integer condition code register. */
922 #define FIRST_PSEUDO_REGISTER 101
924 #define SPARC_FIRST_FP_REG 32
925 /* Additional V9 fp regs. */
926 #define SPARC_FIRST_V9_FP_REG 64
927 #define SPARC_LAST_V9_FP_REG 95
928 /* V9 %fcc[0123]. V8 uses (figuratively) %fcc0. */
929 #define SPARC_FIRST_V9_FCC_REG 96
930 #define SPARC_LAST_V9_FCC_REG 99
932 #define SPARC_FCC_REG 96
933 /* Integer CC reg. We don't distinguish %icc from %xcc. */
934 #define SPARC_ICC_REG 100
936 /* Nonzero if REGNO is an fp reg. */
937 #define SPARC_FP_REG_P(REGNO) \
938 ((REGNO) >= SPARC_FIRST_FP_REG && (REGNO) <= SPARC_LAST_V9_FP_REG)
940 /* Argument passing regs. */
941 #define SPARC_OUTGOING_INT_ARG_FIRST 8
942 #define SPARC_INCOMING_INT_ARG_FIRST (TARGET_FLAT ? 8 : 24)
943 #define SPARC_FP_ARG_FIRST 32
945 /* 1 for registers that have pervasive standard uses
946 and are not available for the register allocator.
949 g1 is free to use as temporary.
950 g2-g4 are reserved for applications. Gcc normally uses them as
951 temporaries, but this can be disabled via the -mno-app-regs option.
952 g5 through g7 are reserved for the operating system.
955 g1,g5 are free to use as temporaries, and are free to use between calls
956 if the call is to an external function via the PLT.
957 g4 is free to use as a temporary in the non-embedded case.
958 g4 is reserved in the embedded case.
959 g2-g3 are reserved for applications. Gcc normally uses them as
960 temporaries, but this can be disabled via the -mno-app-regs option.
961 g6-g7 are reserved for the operating system (or application in
963 ??? Register 1 is used as a temporary by the 64 bit sethi pattern, so must
964 currently be a fixed register until this pattern is rewritten.
965 Register 1 is also used when restoring call-preserved registers in large
968 Registers fixed in arch32 and not arch64 (or vice-versa) are marked in
969 CONDITIONAL_REGISTER_USAGE in order to properly handle -ffixed-.
972 #define FIXED_REGISTERS \
973 {1, 0, 2, 2, 2, 2, 1, 1, \
974 0, 0, 0, 0, 0, 0, 1, 0, \
975 0, 0, 0, 0, 0, 0, 0, 0, \
976 0, 0, 0, 0, 0, 0, 1, 1, \
978 0, 0, 0, 0, 0, 0, 0, 0, \
979 0, 0, 0, 0, 0, 0, 0, 0, \
980 0, 0, 0, 0, 0, 0, 0, 0, \
981 0, 0, 0, 0, 0, 0, 0, 0, \
983 0, 0, 0, 0, 0, 0, 0, 0, \
984 0, 0, 0, 0, 0, 0, 0, 0, \
985 0, 0, 0, 0, 0, 0, 0, 0, \
986 0, 0, 0, 0, 0, 0, 0, 0, \
990 /* 1 for registers not available across function calls.
991 These must include the FIXED_REGISTERS and also any
992 registers that can be used without being saved.
993 The latter must include the registers where values are returned
994 and the register where structure-value addresses are passed.
995 Aside from that, you can include as many other registers as you like. */
997 #define CALL_USED_REGISTERS \
998 {1, 1, 1, 1, 1, 1, 1, 1, \
999 1, 1, 1, 1, 1, 1, 1, 1, \
1000 0, 0, 0, 0, 0, 0, 0, 0, \
1001 0, 0, 0, 0, 0, 0, 1, 1, \
1003 1, 1, 1, 1, 1, 1, 1, 1, \
1004 1, 1, 1, 1, 1, 1, 1, 1, \
1005 1, 1, 1, 1, 1, 1, 1, 1, \
1006 1, 1, 1, 1, 1, 1, 1, 1, \
1008 1, 1, 1, 1, 1, 1, 1, 1, \
1009 1, 1, 1, 1, 1, 1, 1, 1, \
1010 1, 1, 1, 1, 1, 1, 1, 1, \
1011 1, 1, 1, 1, 1, 1, 1, 1, \
1015 /* If !TARGET_FPU, then make the fp registers and fp cc regs fixed so that
1016 they won't be allocated. */
1018 #define CONDITIONAL_REGISTER_USAGE \
1023 fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
1024 call_used_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
1026 /* If the user has passed -f{fixed,call-{used,saved}}-g5 */ \
1027 /* then honour it. */ \
1028 if (TARGET_ARCH32 && fixed_regs[5]) \
1029 fixed_regs[5] = 1; \
1030 else if (TARGET_ARCH64 && fixed_regs[5] == 2) \
1031 fixed_regs[5] = 0; \
1035 for (regno = SPARC_FIRST_V9_FP_REG; \
1036 regno <= SPARC_LAST_V9_FP_REG; \
1038 fixed_regs[regno] = 1; \
1039 /* %fcc0 is used by v8 and v9. */ \
1040 for (regno = SPARC_FIRST_V9_FCC_REG + 1; \
1041 regno <= SPARC_LAST_V9_FCC_REG; \
1043 fixed_regs[regno] = 1; \
1048 for (regno = 32; regno < SPARC_LAST_V9_FCC_REG; regno++) \
1049 fixed_regs[regno] = 1; \
1051 /* If the user has passed -f{fixed,call-{used,saved}}-g2 */ \
1052 /* then honour it. Likewise with g3 and g4. */ \
1053 if (fixed_regs[2] == 2) \
1054 fixed_regs[2] = ! TARGET_APP_REGS; \
1055 if (fixed_regs[3] == 2) \
1056 fixed_regs[3] = ! TARGET_APP_REGS; \
1057 if (TARGET_ARCH32 && fixed_regs[4] == 2) \
1058 fixed_regs[4] = ! TARGET_APP_REGS; \
1059 else if (TARGET_CM_EMBMEDANY) \
1060 fixed_regs[4] = 1; \
1061 else if (fixed_regs[4] == 2) \
1062 fixed_regs[4] = 0; \
1065 /* Let the compiler believe the frame pointer is still \
1066 %fp, but output it as %i7. */ \
1067 fixed_regs[31] = 1; \
1068 reg_names[FRAME_POINTER_REGNUM] = "%i7"; \
1069 /* ??? This is a hack to disable leaf functions. */ \
1070 global_regs[7] = 1; \
1072 if (profile_block_flag) \
1074 /* %g1 and %g2 (sparc32) resp. %g4 (sparc64) must be \
1075 fixed, because BLOCK_PROFILER uses them. */ \
1076 fixed_regs[1] = 1; \
1077 fixed_regs[TARGET_ARCH64 ? 4 : 2] = 1; \
1082 /* Return number of consecutive hard regs needed starting at reg REGNO
1083 to hold something of mode MODE.
1084 This is ordinarily the length in words of a value of mode MODE
1085 but can be less for certain modes in special long registers.
1087 On SPARC, ordinary registers hold 32 bits worth;
1088 this means both integer and floating point registers.
1089 On v9, integer regs hold 64 bits worth; floating point regs hold
1090 32 bits worth (this includes the new fp regs as even the odd ones are
1091 included in the hard register count). */
1093 #define HARD_REGNO_NREGS(REGNO, MODE) \
1096 ? (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD \
1097 : (GET_MODE_SIZE (MODE) + 3) / 4) \
1098 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
1100 /* A subreg in 64 bit mode will have the wrong offset for a floating point
1101 register. The least significant part is at offset 1, compared to 0 for
1102 integer registers. This only applies when FMODE is a larger mode.
1103 We also need to handle a special case of TF-->DF conversions. */
1104 #define ALTER_HARD_SUBREG(TMODE, WORD, FMODE, REGNO) \
1106 && (REGNO) >= SPARC_FIRST_FP_REG \
1107 && (REGNO) <= SPARC_LAST_V9_FP_REG \
1108 && (TMODE) == SImode \
1109 && !((FMODE) == QImode || (FMODE) == HImode) \
1111 : ((TMODE) == DFmode && (FMODE) == TFmode) \
1112 ? ((REGNO) + ((WORD) * 2)) \
1113 : ((REGNO) + (WORD)))
1115 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
1116 See sparc.c for how we initialize this. */
1117 extern int *hard_regno_mode_classes;
1118 extern int sparc_mode_class[];
1119 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
1120 ((hard_regno_mode_classes[REGNO] & sparc_mode_class[MODE]) != 0)
1122 /* Value is 1 if it is a good idea to tie two pseudo registers
1123 when one has mode MODE1 and one has mode MODE2.
1124 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
1125 for any hard reg, then this must be 0 for correct output.
1127 For V9: SFmode can't be combined with other float modes, because they can't
1128 be allocated to the %d registers. Also, DFmode won't fit in odd %f
1129 registers, but SFmode will. */
1130 #define MODES_TIEABLE_P(MODE1, MODE2) \
1131 ((MODE1) == (MODE2) \
1132 || (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2) \
1134 || (GET_MODE_CLASS (MODE1) != MODE_FLOAT \
1135 || (MODE1 != SFmode && MODE2 != SFmode)))))
1137 /* Specify the registers used for certain standard purposes.
1138 The values of these macros are register numbers. */
1140 /* SPARC pc isn't overloaded on a register that the compiler knows about. */
1141 /* #define PC_REGNUM */
1143 /* Register to use for pushing function arguments. */
1144 #define STACK_POINTER_REGNUM 14
1146 /* Actual top-of-stack address is 92/176 greater than the contents of the
1147 stack pointer register for !v9/v9. That is:
1148 - !v9: 64 bytes for the in and local registers, 4 bytes for structure return
1149 address, and 6*4 bytes for the 6 register parameters.
1150 - v9: 128 bytes for the in and local registers + 6*8 bytes for the integer
1152 #define STACK_POINTER_OFFSET FIRST_PARM_OFFSET(0)
1154 /* The stack bias (amount by which the hardware register is offset by). */
1155 #define SPARC_STACK_BIAS ((TARGET_ARCH64 && TARGET_STACK_BIAS) ? 2047 : 0)
1157 /* Is stack biased? */
1158 #define STACK_BIAS SPARC_STACK_BIAS
1160 /* Base register for access to local variables of the function. */
1161 #define FRAME_POINTER_REGNUM 30
1164 /* Register that is used for the return address for the flat model. */
1165 #define RETURN_ADDR_REGNUM 15
1168 /* Value should be nonzero if functions must have frame pointers.
1169 Zero means the frame pointer need not be set up (and parms
1170 may be accessed via the stack pointer) in functions that seem suitable.
1171 This is computed in `reload', in reload1.c.
1172 Used in flow.c, global.c, and reload1.c.
1174 Being a non-leaf function does not mean a frame pointer is needed in the
1175 flat window model. However, the debugger won't be able to backtrace through
1177 #define FRAME_POINTER_REQUIRED \
1178 (TARGET_FLAT ? (current_function_calls_alloca || current_function_varargs \
1179 || !leaf_function_p ()) \
1180 : ! (leaf_function_p () && only_leaf_regs_used ()))
1182 /* C statement to store the difference between the frame pointer
1183 and the stack pointer values immediately after the function prologue.
1185 Note, we always pretend that this is a leaf function because if
1186 it's not, there's no point in trying to eliminate the
1187 frame pointer. If it is a leaf function, we guessed right! */
1188 #define INITIAL_FRAME_POINTER_OFFSET(VAR) \
1189 ((VAR) = (TARGET_FLAT ? sparc_flat_compute_frame_size (get_frame_size ()) \
1190 : compute_frame_size (get_frame_size (), 1)))
1192 /* Base register for access to arguments of the function. */
1193 #define ARG_POINTER_REGNUM FRAME_POINTER_REGNUM
1195 /* Register in which static-chain is passed to a function. This must
1196 not be a register used by the prologue. */
1197 #define STATIC_CHAIN_REGNUM (TARGET_ARCH64 ? 5 : 2)
1199 /* Register which holds offset table for position-independent
1202 #define PIC_OFFSET_TABLE_REGNUM 23
1204 #define FINALIZE_PIC finalize_pic ()
1206 /* Pick a default value we can notice from override_options:
1208 v9: Default is off. */
1210 #define DEFAULT_PCC_STRUCT_RETURN -1
1212 /* Sparc ABI says that quad-precision floats and all structures are returned
1214 For v9: unions <= 32 bytes in size are returned in int regs,
1215 structures up to 32 bytes are returned in int and fp regs. */
1217 #define RETURN_IN_MEMORY(TYPE) \
1219 ? (TYPE_MODE (TYPE) == BLKmode \
1220 || TYPE_MODE (TYPE) == TFmode \
1221 || TYPE_MODE (TYPE) == TCmode) \
1222 : (TYPE_MODE (TYPE) == BLKmode \
1223 && int_size_in_bytes (TYPE) > 32))
1225 /* Functions which return large structures get the address
1226 to place the wanted value at offset 64 from the frame.
1227 Must reserve 64 bytes for the in and local registers.
1228 v9: Functions which return large structures get the address to place the
1229 wanted value from an invisible first argument. */
1230 /* Used only in other #defines in this file. */
1231 #define STRUCT_VALUE_OFFSET 64
1233 #define STRUCT_VALUE \
1236 : gen_rtx_MEM (Pmode, plus_constant (stack_pointer_rtx, \
1237 STRUCT_VALUE_OFFSET)))
1239 #define STRUCT_VALUE_INCOMING \
1242 : gen_rtx_MEM (Pmode, plus_constant (frame_pointer_rtx, \
1243 STRUCT_VALUE_OFFSET)))
1245 /* Define the classes of registers for register constraints in the
1246 machine description. Also define ranges of constants.
1248 One of the classes must always be named ALL_REGS and include all hard regs.
1249 If there is more than one class, another class must be named NO_REGS
1250 and contain no registers.
1252 The name GENERAL_REGS must be the name of a class (or an alias for
1253 another name such as ALL_REGS). This is the class of registers
1254 that is allowed by "g" or "r" in a register constraint.
1255 Also, registers outside this class are allocated only when
1256 instructions express preferences for them.
1258 The classes must be numbered in nondecreasing order; that is,
1259 a larger-numbered class must never be contained completely
1260 in a smaller-numbered class.
1262 For any two classes, it is very desirable that there be another
1263 class that represents their union. */
1265 /* The SPARC has various kinds of registers: general, floating point,
1266 and condition codes [well, it has others as well, but none that we
1267 care directly about].
1269 For v9 we must distinguish between the upper and lower floating point
1270 registers because the upper ones can't hold SFmode values.
1271 HARD_REGNO_MODE_OK won't help here because reload assumes that register(s)
1272 satisfying a group need for a class will also satisfy a single need for
1273 that class. EXTRA_FP_REGS is a bit of a misnomer as it covers all 64 fp
1276 It is important that one class contains all the general and all the standard
1277 fp regs. Otherwise find_reg() won't properly allocate int regs for moves,
1278 because reg_class_record() will bias the selection in favor of fp regs,
1279 because reg_class_subunion[GENERAL_REGS][FP_REGS] will yield FP_REGS,
1280 because FP_REGS > GENERAL_REGS.
1282 It is also important that one class contain all the general and all the
1283 fp regs. Otherwise when spilling a DFmode reg, it may be from EXTRA_FP_REGS
1284 but find_reloads() may use class GENERAL_OR_FP_REGS. This will cause
1285 allocate_reload_reg() to bypass it causing an abort because the compiler
1286 thinks it doesn't have a spill reg when in fact it does.
1288 v9 also has 4 floating point condition code registers. Since we don't
1289 have a class that is the union of FPCC_REGS with either of the others,
1290 it is important that it appear first. Otherwise the compiler will die
1291 trying to compile _fixunsdfsi because fix_truncdfsi2 won't match its
1294 It is important that SPARC_ICC_REG have class NO_REGS. Otherwise combine
1295 may try to use it to hold an SImode value. See register_operand.
1296 ??? Should %fcc[0123] be handled similarly?
1299 enum reg_class { NO_REGS, FPCC_REGS, I64_REGS, GENERAL_REGS, FP_REGS,
1300 EXTRA_FP_REGS, GENERAL_OR_FP_REGS, GENERAL_OR_EXTRA_FP_REGS,
1301 ALL_REGS, LIM_REG_CLASSES };
1303 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1305 /* Give names of register classes as strings for dump file. */
1307 #define REG_CLASS_NAMES \
1308 { "NO_REGS", "FPCC_REGS", "I64_REGS", "GENERAL_REGS", "FP_REGS", \
1309 "EXTRA_FP_REGS", "GENERAL_OR_FP_REGS", "GENERAL_OR_EXTRA_FP_REGS", \
1312 /* Define which registers fit in which classes.
1313 This is an initializer for a vector of HARD_REG_SET
1314 of length N_REG_CLASSES. */
1316 #define REG_CLASS_CONTENTS \
1317 {{0, 0, 0, 0}, {0, 0, 0, 0xf}, {0xffff, 0, 0, 0}, \
1318 {-1, 0, 0, 0}, {0, -1, 0, 0}, {0, -1, -1, 0}, \
1319 {-1, -1, 0, 0}, {-1, -1, -1, 0}, {-1, -1, -1, 0x1f}}
1321 /* The same information, inverted:
1322 Return the class number of the smallest class containing
1323 reg number REGNO. This could be a conditional expression
1324 or could index an array. */
1326 extern enum reg_class sparc_regno_reg_class[];
1328 #define REGNO_REG_CLASS(REGNO) sparc_regno_reg_class[(REGNO)]
1330 /* This is the order in which to allocate registers normally.
1332 We put %f0/%f1 last among the float registers, so as to make it more
1333 likely that a pseudo-register which dies in the float return register
1334 will get allocated to the float return register, thus saving a move
1335 instruction at the end of the function. */
1337 #define REG_ALLOC_ORDER \
1338 { 8, 9, 10, 11, 12, 13, 2, 3, \
1339 15, 16, 17, 18, 19, 20, 21, 22, \
1340 23, 24, 25, 26, 27, 28, 29, 31, \
1341 34, 35, 36, 37, 38, 39, /* %f2-%f7 */ \
1342 40, 41, 42, 43, 44, 45, 46, 47, /* %f8-%f15 */ \
1343 48, 49, 50, 51, 52, 53, 54, 55, /* %f16-%f23 */ \
1344 56, 57, 58, 59, 60, 61, 62, 63, /* %f24-%f31 */ \
1345 64, 65, 66, 67, 68, 69, 70, 71, /* %f32-%f39 */ \
1346 72, 73, 74, 75, 76, 77, 78, 79, /* %f40-%f47 */ \
1347 80, 81, 82, 83, 84, 85, 86, 87, /* %f48-%f55 */ \
1348 88, 89, 90, 91, 92, 93, 94, 95, /* %f56-%f63 */ \
1349 32, 33, /* %f0,%f1 */ \
1350 96, 97, 98, 99, 100, /* %fcc0-3, %icc */ \
1351 1, 4, 5, 6, 7, 0, 14, 30}
1353 /* This is the order in which to allocate registers for
1354 leaf functions. If all registers can fit in the "gi" registers,
1355 then we have the possibility of having a leaf function. */
1357 #define REG_LEAF_ALLOC_ORDER \
1358 { 2, 3, 24, 25, 26, 27, 28, 29, \
1360 15, 8, 9, 10, 11, 12, 13, \
1361 16, 17, 18, 19, 20, 21, 22, 23, \
1362 34, 35, 36, 37, 38, 39, \
1363 40, 41, 42, 43, 44, 45, 46, 47, \
1364 48, 49, 50, 51, 52, 53, 54, 55, \
1365 56, 57, 58, 59, 60, 61, 62, 63, \
1366 64, 65, 66, 67, 68, 69, 70, 71, \
1367 72, 73, 74, 75, 76, 77, 78, 79, \
1368 80, 81, 82, 83, 84, 85, 86, 87, \
1369 88, 89, 90, 91, 92, 93, 94, 95, \
1371 96, 97, 98, 99, 100, \
1374 #define ORDER_REGS_FOR_LOCAL_ALLOC order_regs_for_local_alloc ()
1376 /* ??? %g7 is not a leaf register to effectively #undef LEAF_REGISTERS when
1377 -mflat is used. Function only_leaf_regs_used will return 0 if a global
1378 register is used and is not permitted in a leaf function. We make %g7
1379 a global reg if -mflat and voila. Since %g7 is a system register and is
1380 fixed it won't be used by gcc anyway. */
1382 #define LEAF_REGISTERS \
1383 { 1, 1, 1, 1, 1, 1, 1, 0, \
1384 0, 0, 0, 0, 0, 0, 1, 0, \
1385 0, 0, 0, 0, 0, 0, 0, 0, \
1386 1, 1, 1, 1, 1, 1, 0, 1, \
1387 1, 1, 1, 1, 1, 1, 1, 1, \
1388 1, 1, 1, 1, 1, 1, 1, 1, \
1389 1, 1, 1, 1, 1, 1, 1, 1, \
1390 1, 1, 1, 1, 1, 1, 1, 1, \
1391 1, 1, 1, 1, 1, 1, 1, 1, \
1392 1, 1, 1, 1, 1, 1, 1, 1, \
1393 1, 1, 1, 1, 1, 1, 1, 1, \
1394 1, 1, 1, 1, 1, 1, 1, 1, \
1397 extern char leaf_reg_remap[];
1398 #define LEAF_REG_REMAP(REGNO) (leaf_reg_remap[REGNO])
1400 /* The class value for index registers, and the one for base regs. */
1401 #define INDEX_REG_CLASS GENERAL_REGS
1402 #define BASE_REG_CLASS GENERAL_REGS
1404 /* Local macro to handle the two v9 classes of FP regs. */
1405 #define FP_REG_CLASS_P(CLASS) ((CLASS) == FP_REGS || (CLASS) == EXTRA_FP_REGS)
1407 /* Get reg_class from a letter such as appears in the machine description.
1408 In the not-v9 case, coerce v9's 'e' class to 'f', so we can use 'e' in the
1409 .md file for v8 and v9.
1410 'd' and 'b' are used for single and double precision VIS operations,
1412 'h' is used for V8+ 64 bit global and out registers. */
1414 #define REG_CLASS_FROM_LETTER(C) \
1416 ? ((C) == 'f' ? FP_REGS \
1417 : (C) == 'e' ? EXTRA_FP_REGS \
1418 : (C) == 'c' ? FPCC_REGS \
1419 : ((C) == 'd' && TARGET_VIS) ? FP_REGS\
1420 : ((C) == 'b' && TARGET_VIS) ? EXTRA_FP_REGS\
1421 : ((C) == 'h' && TARGET_V8PLUS) ? I64_REGS\
1423 : ((C) == 'f' ? FP_REGS \
1424 : (C) == 'e' ? FP_REGS \
1425 : (C) == 'c' ? FPCC_REGS \
1428 /* The letters I, J, K, L and M in a register constraint string
1429 can be used to stand for particular ranges of immediate operands.
1430 This macro defines what the ranges are.
1431 C is the letter, and VALUE is a constant value.
1432 Return 1 if VALUE is in the range specified by C.
1434 `I' is used for the range of constants an insn can actually contain.
1435 `J' is used for the range which is just zero (since that is R0).
1436 `K' is used for constants which can be loaded with a single sethi insn.
1437 `L' is used for the range of constants supported by the movcc insns.
1438 `M' is used for the range of constants supported by the movrcc insns. */
1440 #define SPARC_SIMM10_P(X) ((unsigned HOST_WIDE_INT) (X) + 0x200 < 0x400)
1441 #define SPARC_SIMM11_P(X) ((unsigned HOST_WIDE_INT) (X) + 0x400 < 0x800)
1442 #define SPARC_SIMM13_P(X) ((unsigned HOST_WIDE_INT) (X) + 0x1000 < 0x2000)
1443 /* 10 and 11 bit immediates are only used for a few specific insns.
1444 SMALL_INT is used throughout the port so we continue to use it. */
1445 #define SMALL_INT(X) (SPARC_SIMM13_P (INTVAL (X)))
1446 /* 13 bit immediate, considering only the low 32 bits */
1447 #define SMALL_INT32(X) (SPARC_SIMM13_P ((int)INTVAL (X) & 0xffffffff))
1448 #define SPARC_SETHI_P(X) \
1449 (((unsigned HOST_WIDE_INT) (X) & \
1450 (TARGET_ARCH64 ? ~(unsigned HOST_WIDE_INT) 0xfffffc00 : 0x3ff)) == 0)
1452 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
1453 ((C) == 'I' ? SPARC_SIMM13_P (VALUE) \
1454 : (C) == 'J' ? (VALUE) == 0 \
1455 : (C) == 'K' ? SPARC_SETHI_P (VALUE) \
1456 : (C) == 'L' ? SPARC_SIMM11_P (VALUE) \
1457 : (C) == 'M' ? SPARC_SIMM10_P (VALUE) \
1460 /* Similar, but for floating constants, and defining letters G and H.
1461 Here VALUE is the CONST_DOUBLE rtx itself. */
1463 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
1464 ((C) == 'G' ? fp_zero_operand (VALUE, GET_MODE (VALUE)) \
1465 : (C) == 'H' ? arith_double_operand (VALUE, DImode) \
1468 /* Given an rtx X being reloaded into a reg required to be
1469 in class CLASS, return the class of reg to actually use.
1470 In general this is just CLASS; but on some machines
1471 in some cases it is preferable to use a more restrictive class. */
1472 /* - We can't load constants into FP registers.
1473 - We can't load FP constants into integer registers when soft-float,
1474 because there is no soft-float pattern with a r/F constraint.
1475 - Try and reload integer constants (symbolic or otherwise) back into
1476 registers directly, rather than having them dumped to memory. */
1478 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
1480 ? ((FP_REG_CLASS_P (CLASS) \
1481 || (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \
1484 : (!FP_REG_CLASS_P (CLASS) \
1485 && GET_MODE_CLASS (GET_MODE (X)) == MODE_INT) \
1490 /* Return the register class of a scratch register needed to load IN into
1491 a register of class CLASS in MODE.
1493 We need a temporary when loading/storing a HImode/QImode value
1494 between memory and the FPU registers. This can happen when combine puts
1495 a paradoxical subreg in a float/fix conversion insn. */
1497 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, IN) \
1498 ((FP_REG_CLASS_P (CLASS) \
1499 && ((MODE) == HImode || (MODE) == QImode) \
1500 && (GET_CODE (IN) == MEM \
1501 || ((GET_CODE (IN) == REG || GET_CODE (IN) == SUBREG) \
1502 && true_regnum (IN) == -1))) \
1504 : (((TARGET_CM_MEDANY \
1505 && symbolic_operand ((IN), (MODE))) \
1506 || (TARGET_CM_EMBMEDANY \
1507 && text_segment_operand ((IN), (MODE)))) \
1512 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, IN) \
1513 ((FP_REG_CLASS_P (CLASS) \
1514 && ((MODE) == HImode || (MODE) == QImode) \
1515 && (GET_CODE (IN) == MEM \
1516 || ((GET_CODE (IN) == REG || GET_CODE (IN) == SUBREG) \
1517 && true_regnum (IN) == -1))) \
1519 : (((TARGET_CM_MEDANY \
1520 && symbolic_operand ((IN), (MODE))) \
1521 || (TARGET_CM_EMBMEDANY \
1522 && text_segment_operand ((IN), (MODE)))) \
1527 /* On SPARC it is not possible to directly move data between
1528 GENERAL_REGS and FP_REGS. */
1529 #define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
1530 (FP_REG_CLASS_P (CLASS1) != FP_REG_CLASS_P (CLASS2))
1532 /* Return the stack location to use for secondary memory needed reloads.
1533 We want to use the reserved location just below the frame pointer.
1534 However, we must ensure that there is a frame, so use assign_stack_local
1535 if the frame size is zero. */
1536 #define SECONDARY_MEMORY_NEEDED_RTX(MODE) \
1537 (get_frame_size () == 0 \
1538 ? assign_stack_local (MODE, GET_MODE_SIZE (MODE), 0) \
1539 : gen_rtx_MEM (MODE, plus_constant (frame_pointer_rtx, \
1540 STARTING_FRAME_OFFSET)))
1542 /* Get_secondary_mem widens its argument to BITS_PER_WORD which loses on v9
1543 because the movsi and movsf patterns don't handle r/f moves.
1544 For v8 we copy the default definition. */
1545 #define SECONDARY_MEMORY_NEEDED_MODE(MODE) \
1547 ? (GET_MODE_BITSIZE (MODE) < 32 \
1548 ? mode_for_size (32, GET_MODE_CLASS (MODE), 0) \
1550 : (GET_MODE_BITSIZE (MODE) < BITS_PER_WORD \
1551 ? mode_for_size (BITS_PER_WORD, GET_MODE_CLASS (MODE), 0) \
1554 /* Return the maximum number of consecutive registers
1555 needed to represent mode MODE in a register of class CLASS. */
1556 /* On SPARC, this is the size of MODE in words. */
1557 #define CLASS_MAX_NREGS(CLASS, MODE) \
1558 (FP_REG_CLASS_P (CLASS) ? (GET_MODE_SIZE (MODE) + 3) / 4 \
1559 : (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
1561 /* Stack layout; function entry, exit and calling. */
1563 /* Define the number of register that can hold parameters.
1564 This macro is only used in other macro definitions below and in sparc.c.
1565 MODE is the mode of the argument.
1566 !v9: All args are passed in %o0-%o5.
1567 v9: %o0-%o5 and %f0-%f31 are cumulatively used to pass values.
1568 See the description in sparc.c. */
1569 #define NPARM_REGS(MODE) \
1571 ? (GET_MODE_CLASS (MODE) == MODE_FLOAT ? 32 : 6) \
1574 /* Define this if pushing a word on the stack
1575 makes the stack pointer a smaller address. */
1576 #define STACK_GROWS_DOWNWARD
1578 /* Define this if the nominal address of the stack frame
1579 is at the high-address end of the local variables;
1580 that is, each additional local variable allocated
1581 goes at a more negative offset in the frame. */
1582 #define FRAME_GROWS_DOWNWARD
1584 /* Offset within stack frame to start allocating local variables at.
1585 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
1586 first local allocated. Otherwise, it is the offset to the BEGINNING
1587 of the first local allocated. */
1588 /* This allows space for one TFmode floating point value. */
1589 #define STARTING_FRAME_OFFSET \
1590 (TARGET_ARCH64 ? (SPARC_STACK_BIAS - 16) \
1591 : (-SPARC_STACK_ALIGN (LONG_DOUBLE_TYPE_SIZE / BITS_PER_UNIT)))
1593 /* If we generate an insn to push BYTES bytes,
1594 this says how many the stack pointer really advances by.
1595 On SPARC, don't define this because there are no push insns. */
1596 /* #define PUSH_ROUNDING(BYTES) */
1598 /* Offset of first parameter from the argument pointer register value.
1599 !v9: This is 64 for the ins and locals, plus 4 for the struct-return reg
1600 even if this function isn't going to use it.
1601 v9: This is 128 for the ins and locals. */
1602 #define FIRST_PARM_OFFSET(FNDECL) \
1603 (TARGET_ARCH64 ? (SPARC_STACK_BIAS + 16 * UNITS_PER_WORD) \
1604 : (STRUCT_VALUE_OFFSET + UNITS_PER_WORD))
1606 /* Offset from the argument pointer register value to the CFA. */
1608 #define ARG_POINTER_CFA_OFFSET SPARC_STACK_BIAS
1610 /* When a parameter is passed in a register, stack space is still
1612 !v9: All 6 possible integer registers have backing store allocated.
1613 v9: Only space for the arguments passed is allocated. */
1614 /* ??? Ideally, we'd use zero here (as the minimum), but zero has special
1615 meaning to the backend. Further, we need to be able to detect if a
1616 varargs/unprototyped function is called, as they may want to spill more
1617 registers than we've provided space. Ugly, ugly. So for now we retain
1618 all 6 slots even for v9. */
1619 #define REG_PARM_STACK_SPACE(DECL) (6 * UNITS_PER_WORD)
1621 /* Keep the stack pointer constant throughout the function.
1622 This is both an optimization and a necessity: longjmp
1623 doesn't behave itself when the stack pointer moves within
1625 #define ACCUMULATE_OUTGOING_ARGS
1627 /* Value is the number of bytes of arguments automatically
1628 popped when returning from a subroutine call.
1629 FUNDECL is the declaration node of the function (as a tree),
1630 FUNTYPE is the data type of the function (as a tree),
1631 or for a library call it is an identifier node for the subroutine name.
1632 SIZE is the number of bytes of arguments passed on the stack. */
1634 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
1636 /* Some subroutine macros specific to this machine.
1637 When !TARGET_FPU, put float return values in the general registers,
1638 since we don't have any fp registers. */
1639 #define BASE_RETURN_VALUE_REG(MODE) \
1641 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 : 8) \
1642 : (((MODE) == SFmode || (MODE) == DFmode) && TARGET_FPU ? 32 : 8))
1644 #define BASE_OUTGOING_VALUE_REG(MODE) \
1646 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 \
1647 : TARGET_FLAT ? 8 : 24) \
1648 : (((MODE) == SFmode || (MODE) == DFmode) && TARGET_FPU ? 32 \
1649 : (TARGET_FLAT ? 8 : 24)))
1651 #define BASE_PASSING_ARG_REG(MODE) \
1653 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 : 8) \
1656 /* ??? FIXME -- seems wrong for v9 structure passing... */
1657 #define BASE_INCOMING_ARG_REG(MODE) \
1659 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 \
1660 : TARGET_FLAT ? 8 : 24) \
1661 : (TARGET_FLAT ? 8 : 24))
1663 /* Define this macro if the target machine has "register windows". This
1664 C expression returns the register number as seen by the called function
1665 corresponding to register number OUT as seen by the calling function.
1666 Return OUT if register number OUT is not an outbound register. */
1668 #define INCOMING_REGNO(OUT) \
1669 ((TARGET_FLAT || (OUT) < 8 || (OUT) > 15) ? (OUT) : (OUT) + 16)
1671 /* Define this macro if the target machine has "register windows". This
1672 C expression returns the register number as seen by the calling function
1673 corresponding to register number IN as seen by the called function.
1674 Return IN if register number IN is not an inbound register. */
1676 #define OUTGOING_REGNO(IN) \
1677 ((TARGET_FLAT || (IN) < 24 || (IN) > 31) ? (IN) : (IN) - 16)
1679 /* Define how to find the value returned by a function.
1680 VALTYPE is the data type of the value (as a tree).
1681 If the precise function being called is known, FUNC is its FUNCTION_DECL;
1682 otherwise, FUNC is 0. */
1684 /* On SPARC the value is found in the first "output" register. */
1686 #define FUNCTION_VALUE(VALTYPE, FUNC) \
1687 function_value ((VALTYPE), TYPE_MODE (VALTYPE), 1)
1689 /* But the called function leaves it in the first "input" register. */
1691 #define FUNCTION_OUTGOING_VALUE(VALTYPE, FUNC) \
1692 function_value ((VALTYPE), TYPE_MODE (VALTYPE), 0)
1694 /* Define how to find the value returned by a library function
1695 assuming the value has mode MODE. */
1697 #define LIBCALL_VALUE(MODE) \
1698 function_value (NULL_TREE, (MODE), 1)
1700 /* 1 if N is a possible register number for a function value
1701 as seen by the caller.
1702 On SPARC, the first "output" reg is used for integer values,
1703 and the first floating point register is used for floating point values. */
1705 #define FUNCTION_VALUE_REGNO_P(N) ((N) == 8 || (N) == 32)
1707 /* Define the size of space to allocate for the return value of an
1710 #define APPLY_RESULT_SIZE 16
1712 /* 1 if N is a possible register number for function argument passing.
1713 On SPARC, these are the "output" registers. v9 also uses %f0-%f31. */
1715 #define FUNCTION_ARG_REGNO_P(N) \
1717 ? (((N) >= 8 && (N) <= 13) || ((N) >= 32 && (N) <= 63)) \
1718 : ((N) >= 8 && (N) <= 13))
1720 /* Define a data type for recording info about an argument list
1721 during the scan of that argument list. This data type should
1722 hold all necessary information about the function itself
1723 and about the args processed so far, enough to enable macros
1724 such as FUNCTION_ARG to determine where the next arg should go.
1726 On SPARC (!v9), this is a single integer, which is a number of words
1727 of arguments scanned so far (including the invisible argument,
1728 if any, which holds the structure-value-address).
1729 Thus 7 or more means all following args should go on the stack.
1731 For v9, we also need to know whether a prototype is present. */
1734 int words; /* number of words passed so far */
1735 int prototype_p; /* non-zero if a prototype is present */
1736 int libcall_p; /* non-zero if a library call */
1738 #define CUMULATIVE_ARGS struct sparc_args
1740 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1741 for a call to a function whose data type is FNTYPE.
1742 For a library call, FNTYPE is 0. */
1744 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT) \
1745 init_cumulative_args (& (CUM), (FNTYPE), (LIBNAME), (INDIRECT));
1747 /* Update the data in CUM to advance over an argument
1748 of mode MODE and data type TYPE.
1749 TYPE is null for libcalls where that information may not be available. */
1751 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1752 function_arg_advance (& (CUM), (MODE), (TYPE), (NAMED))
1754 /* Nonzero if we do not know how to pass TYPE solely in registers. */
1756 #define MUST_PASS_IN_STACK(MODE,TYPE) \
1758 && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
1759 || TREE_ADDRESSABLE (TYPE)))
1761 /* Determine where to put an argument to a function.
1762 Value is zero to push the argument on the stack,
1763 or a hard register in which to store the argument.
1765 MODE is the argument's machine mode.
1766 TYPE is the data type of the argument (as a tree).
1767 This is null for libcalls where that information may
1769 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1770 the preceding args and about the function being called.
1771 NAMED is nonzero if this argument is a named parameter
1772 (otherwise it is an extra parameter matching an ellipsis). */
1774 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1775 function_arg (& (CUM), (MODE), (TYPE), (NAMED), 0)
1777 /* Define where a function finds its arguments.
1778 This is different from FUNCTION_ARG because of register windows. */
1780 #define FUNCTION_INCOMING_ARG(CUM, MODE, TYPE, NAMED) \
1781 function_arg (& (CUM), (MODE), (TYPE), (NAMED), 1)
1783 /* For an arg passed partly in registers and partly in memory,
1784 this is the number of registers used.
1785 For args passed entirely in registers or entirely in memory, zero. */
1787 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
1788 function_arg_partial_nregs (& (CUM), (MODE), (TYPE), (NAMED))
1790 /* A C expression that indicates when an argument must be passed by reference.
1791 If nonzero for an argument, a copy of that argument is made in memory and a
1792 pointer to the argument is passed instead of the argument itself.
1793 The pointer is passed in whatever way is appropriate for passing a pointer
1796 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
1797 function_arg_pass_by_reference (& (CUM), (MODE), (TYPE), (NAMED))
1799 /* If defined, a C expression which determines whether, and in which direction,
1800 to pad out an argument with extra space. The value should be of type
1801 `enum direction': either `upward' to pad above the argument,
1802 `downward' to pad below, or `none' to inhibit padding. */
1804 #define FUNCTION_ARG_PADDING(MODE, TYPE) \
1805 function_arg_padding ((MODE), (TYPE))
1807 /* If defined, a C expression that gives the alignment boundary, in bits,
1808 of an argument with the specified mode and type. If it is not defined,
1809 PARM_BOUNDARY is used for all arguments.
1810 For sparc64, objects requiring 16 byte alignment are passed that way. */
1812 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
1814 && (GET_MODE_ALIGNMENT (MODE) == 128 \
1815 || ((TYPE) && TYPE_ALIGN (TYPE) == 128))) \
1816 ? 128 : PARM_BOUNDARY)
1818 /* Define the information needed to generate branch and scc insns. This is
1819 stored from the compare operation. Note that we can't use "rtx" here
1820 since it hasn't been defined! */
1822 extern struct rtx_def *sparc_compare_op0, *sparc_compare_op1;
1825 /* Generate the special assembly code needed to tell the assembler whatever
1826 it might need to know about the return value of a function.
1828 For Sparc assemblers, we need to output a .proc pseudo-op which conveys
1829 information to the assembler relating to peephole optimization (done in
1832 #define ASM_DECLARE_RESULT(FILE, RESULT) \
1833 fprintf ((FILE), "\t.proc\t0%lo\n", sparc_type_code (TREE_TYPE (RESULT)))
1835 /* Output the label for a function definition. */
1837 #define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \
1839 ASM_DECLARE_RESULT (FILE, DECL_RESULT (DECL)); \
1840 ASM_OUTPUT_LABEL (FILE, NAME); \
1843 /* Output the special assembly code needed to tell the assembler some
1844 register is used as global register variable.
1846 SPARC 64bit psABI declares registers %g2 and %g3 as application
1847 registers and %g6 and %g7 as OS registers. Any object using them
1848 should declare (for %g2/%g3 has to, for %g6/%g7 can) that it uses them
1849 and how they are used (scratch or some global variable).
1850 Linker will then refuse to link together objects which use those
1851 registers incompatibly.
1853 Unless the registers are used for scratch, two different global
1854 registers cannot be declared to the same name, so in the unlikely
1855 case of a global register variable occupying more than one register
1856 we prefix the second and following registers with .gnu.part1. etc. */
1858 extern char sparc_hard_reg_printed[8];
1860 #ifdef HAVE_AS_REGISTER_PSEUDO_OP
1861 #define ASM_DECLARE_REGISTER_GLOBAL(FILE, DECL, REGNO, NAME) \
1863 if (TARGET_ARCH64) \
1865 int end = HARD_REGNO_NREGS ((REGNO), DECL_MODE (decl)) + (REGNO); \
1867 for (reg = (REGNO); reg < 8 && reg < end; reg++) \
1868 if ((reg & ~1) == 2 || (reg & ~1) == 6) \
1870 if (reg == (REGNO)) \
1871 fprintf ((FILE), "\t.register\t%%g%d, %s\n", reg, (NAME)); \
1873 fprintf ((FILE), "\t.register\t%%g%d, .gnu.part%d.%s\n", \
1874 reg, reg - (REGNO), (NAME)); \
1875 sparc_hard_reg_printed[reg] = 1; \
1881 /* This macro generates the assembly code for function entry.
1882 FILE is a stdio stream to output the code to.
1883 SIZE is an int: how many units of temporary storage to allocate.
1884 Refer to the array `regs_ever_live' to determine which registers
1885 to save; `regs_ever_live[I]' is nonzero if register number I
1886 is ever used in the function. This macro is responsible for
1887 knowing which registers should not be saved even if used. */
1889 /* On SPARC, move-double insns between fpu and cpu need an 8-byte block
1890 of memory. If any fpu reg is used in the function, we allocate
1891 such a block here, at the bottom of the frame, just in case it's needed.
1893 If this function is a leaf procedure, then we may choose not
1894 to do a "save" insn. The decision about whether or not
1895 to do this is made in regclass.c. */
1897 #define FUNCTION_PROLOGUE(FILE, SIZE) \
1898 (TARGET_FLAT ? sparc_flat_output_function_prologue (FILE, (int)SIZE) \
1899 : output_function_prologue (FILE, (int)SIZE, \
1900 current_function_uses_only_leaf_regs))
1902 /* Output assembler code to FILE to increment profiler label # LABELNO
1903 for profiling a function entry. */
1905 #define FUNCTION_PROFILER(FILE, LABELNO) \
1906 sparc_function_profiler(FILE, LABELNO)
1908 /* Set the name of the mcount function for the system. */
1910 #define MCOUNT_FUNCTION "*mcount"
1912 /* The following macro shall output assembler code to FILE
1913 to initialize basic-block profiling. */
1915 #define FUNCTION_BLOCK_PROFILER(FILE, BLOCK_OR_LABEL) \
1916 sparc_function_block_profiler(FILE, BLOCK_OR_LABEL)
1918 /* The following macro shall output assembler code to FILE
1919 to increment a counter associated with basic block number BLOCKNO. */
1921 #define BLOCK_PROFILER(FILE, BLOCKNO) \
1922 sparc_block_profiler (FILE, BLOCKNO)
1924 /* The following macro shall output assembler code to FILE
1925 to indicate a return from function during basic-block profiling. */
1927 #define FUNCTION_BLOCK_PROFILER_EXIT(FILE) \
1928 sparc_function_block_profiler_exit(FILE)
1932 /* The function `__bb_trace_func' is called in every basic block
1933 and is not allowed to change the machine state. Saving (restoring)
1934 the state can either be done in the BLOCK_PROFILER macro,
1935 before calling function (rsp. after returning from function)
1936 `__bb_trace_func', or it can be done inside the function by
1937 defining the macros:
1939 MACHINE_STATE_SAVE(ID)
1940 MACHINE_STATE_RESTORE(ID)
1942 In the latter case care must be taken, that the prologue code
1943 of function `__bb_trace_func' does not already change the
1944 state prior to saving it with MACHINE_STATE_SAVE.
1946 The parameter `ID' is a string identifying a unique macro use.
1948 On sparc it is sufficient to save the psw register to memory.
1949 Unfortunately the psw register can be read in supervisor mode only,
1950 so we read only the condition codes by using branch instructions
1951 and hope that this is enough.
1953 On V9, life is much sweater: there is a user accessible %ccr
1954 register, but we use it for 64bit libraries only. */
1958 #define MACHINE_STATE_SAVE(ID) \
1959 int ms_flags, ms_saveret; \
1972 bneg,a LFLGNN"ID"\n\
1975 : "=r"(ms_flags), "=r"(ms_saveret));
1979 #define MACHINE_STATE_SAVE(ID) \
1980 unsigned long ms_flags, ms_saveret; \
1984 : "=r"(ms_flags), "=r"(ms_saveret));
1988 /* On sparc MACHINE_STATE_RESTORE restores the psw register from memory.
1989 The psw register can be written in supervisor mode only,
1990 which is true even for simple condition codes.
1991 We use some combination of instructions to produce the
1992 proper condition codes, but some flag combinations can not
1993 be generated in this way. If this happens an unimplemented
1994 instruction will be executed to abort the program. */
1998 #define MACHINE_STATE_RESTORE(ID) \
1999 { extern char flgtab[] __asm__("LFLGTAB"ID); \
2003 ! Do part of VC in the delay slot here, as it needs 3 insns.\n\
2020 subcc %%g0,%%g0,%%g0\n\
2029 orcc %%g0,-1,%%g0\n\
2032 addcc %%g0,%3,%%g0\n\
2054 : "r"(ms_flags*8), "r"(flgtab), "r"(-1), \
2055 "r"(0x80000000), "r"(ms_saveret) \
2060 #define MACHINE_STATE_RESTORE(ID) \
2064 : : "r"(ms_flags), "r"(ms_saveret) \
2069 #endif /* IN_LIBGCC2 */
2071 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
2072 the stack pointer does not matter. The value is tested only in
2073 functions that have frame pointers.
2074 No definition is equivalent to always zero. */
2076 #define EXIT_IGNORE_STACK \
2077 (get_frame_size () != 0 \
2078 || current_function_calls_alloca || current_function_outgoing_args_size)
2080 /* This macro generates the assembly code for function exit,
2081 on machines that need it. If FUNCTION_EPILOGUE is not defined
2082 then individual return instructions are generated for each
2083 return statement. Args are same as for FUNCTION_PROLOGUE.
2085 The function epilogue should not depend on the current stack pointer!
2086 It should use the frame pointer only. This is mandatory because
2087 of alloca; we also take advantage of it to omit stack adjustments
2088 before returning. */
2090 #define FUNCTION_EPILOGUE(FILE, SIZE) \
2091 (TARGET_FLAT ? sparc_flat_output_function_epilogue (FILE, (int)SIZE) \
2092 : output_function_epilogue (FILE, (int)SIZE, \
2093 current_function_uses_only_leaf_regs))
2095 #define DELAY_SLOTS_FOR_EPILOGUE \
2096 (TARGET_FLAT ? sparc_flat_epilogue_delay_slots () : 1)
2097 #define ELIGIBLE_FOR_EPILOGUE_DELAY(trial, slots_filled) \
2098 (TARGET_FLAT ? sparc_flat_eligible_for_epilogue_delay (trial, slots_filled) \
2099 : eligible_for_epilogue_delay (trial, slots_filled))
2101 /* Define registers used by the epilogue and return instruction. */
2102 #define EPILOGUE_USES(REGNO) \
2103 (!TARGET_FLAT && REGNO == 31)
2105 /* Length in units of the trampoline for entering a nested function. */
2107 #define TRAMPOLINE_SIZE (TARGET_ARCH64 ? 32 : 16)
2109 #define TRAMPOLINE_ALIGNMENT 128 /* 16 bytes */
2111 /* Emit RTL insns to initialize the variable parts of a trampoline.
2112 FNADDR is an RTX for the address of the function's pure code.
2113 CXT is an RTX for the static chain value for the function. */
2115 #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
2116 if (TARGET_ARCH64) \
2117 sparc64_initialize_trampoline (TRAMP, FNADDR, CXT); \
2119 sparc_initialize_trampoline (TRAMP, FNADDR, CXT)
2121 /* Generate necessary RTL for __builtin_saveregs(). */
2123 #define EXPAND_BUILTIN_SAVEREGS() sparc_builtin_saveregs ()
2125 /* Implement `va_start' for varargs and stdarg. */
2126 #define EXPAND_BUILTIN_VA_START(stdarg, valist, nextarg) \
2127 sparc_va_start (stdarg, valist, nextarg)
2129 /* Implement `va_arg'. */
2130 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
2131 sparc_va_arg (valist, type)
2133 /* Define this macro if the location where a function argument is passed
2134 depends on whether or not it is a named argument.
2136 This macro controls how the NAMED argument to FUNCTION_ARG
2137 is set for varargs and stdarg functions. With this macro defined,
2138 the NAMED argument is always true for named arguments, and false for
2139 unnamed arguments. If this is not defined, but SETUP_INCOMING_VARARGS
2140 is defined, then all arguments are treated as named. Otherwise, all named
2141 arguments except the last are treated as named.
2142 For the v9 we want NAMED to mean what it says it means. */
2144 #define STRICT_ARGUMENT_NAMING TARGET_V9
2146 /* Generate RTL to flush the register windows so as to make arbitrary frames
2148 #define SETUP_FRAME_ADDRESSES() \
2149 emit_insn (gen_flush_register_windows ())
2151 /* Given an rtx for the address of a frame,
2152 return an rtx for the address of the word in the frame
2153 that holds the dynamic chain--the previous frame's address.
2154 ??? -mflat support? */
2155 #define DYNAMIC_CHAIN_ADDRESS(frame) plus_constant (frame, 14 * UNITS_PER_WORD)
2157 /* The return address isn't on the stack, it is in a register, so we can't
2158 access it from the current frame pointer. We can access it from the
2159 previous frame pointer though by reading a value from the register window
2161 #define RETURN_ADDR_IN_PREVIOUS_FRAME
2163 /* This is the offset of the return address to the true next instruction to be
2164 executed for the current function. */
2165 #define RETURN_ADDR_OFFSET \
2166 (8 + 4 * (! TARGET_ARCH64 && current_function_returns_struct))
2168 /* The current return address is in %i7. The return address of anything
2169 farther back is in the register window save area at [%fp+60]. */
2170 /* ??? This ignores the fact that the actual return address is +8 for normal
2171 returns, and +12 for structure returns. */
2172 #define RETURN_ADDR_RTX(count, frame) \
2174 ? gen_rtx_REG (Pmode, 31) \
2175 : gen_rtx_MEM (Pmode, \
2176 memory_address (Pmode, plus_constant (frame, \
2177 15 * UNITS_PER_WORD))))
2179 /* Before the prologue, the return address is %o7 + 8. OK, sometimes it's
2180 +12, but always using +8 is close enough for frame unwind purposes.
2181 Actually, just using %o7 is close enough for unwinding, but %o7+8
2182 is something you can return to. */
2183 #define INCOMING_RETURN_ADDR_RTX \
2184 plus_constant (gen_rtx_REG (word_mode, 15), 8)
2186 /* The offset from the incoming value of %sp to the top of the stack frame
2187 for the current function. On sparc64, we have to account for the stack
2189 #define INCOMING_FRAME_SP_OFFSET SPARC_STACK_BIAS
2191 #define DOESNT_NEED_UNWINDER (! TARGET_FLAT)
2193 /* Addressing modes, and classification of registers for them. */
2195 /* #define HAVE_POST_INCREMENT 0 */
2196 /* #define HAVE_POST_DECREMENT 0 */
2198 /* #define HAVE_PRE_DECREMENT 0 */
2199 /* #define HAVE_PRE_INCREMENT 0 */
2201 /* Macros to check register numbers against specific register classes. */
2203 /* These assume that REGNO is a hard or pseudo reg number.
2204 They give nonzero only if REGNO is a hard reg of the suitable class
2205 or a pseudo reg currently allocated to a suitable hard reg.
2206 Since they use reg_renumber, they are safe only once reg_renumber
2207 has been allocated, which happens in local-alloc.c. */
2209 #define REGNO_OK_FOR_INDEX_P(REGNO) \
2210 ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < (unsigned)32)
2211 #define REGNO_OK_FOR_BASE_P(REGNO) \
2212 ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < (unsigned)32)
2213 #define REGNO_OK_FOR_FP_P(REGNO) \
2214 (((unsigned) (REGNO) - 32 < (TARGET_V9 ? (unsigned)64 : (unsigned)32)) \
2215 || ((unsigned) reg_renumber[REGNO] - 32 < (TARGET_V9 ? (unsigned)64 : (unsigned)32)))
2216 #define REGNO_OK_FOR_CCFP_P(REGNO) \
2218 && (((unsigned) (REGNO) - 96 < (unsigned)4) \
2219 || ((unsigned) reg_renumber[REGNO] - 96 < (unsigned)4)))
2221 /* Now macros that check whether X is a register and also,
2222 strictly, whether it is in a specified class.
2224 These macros are specific to the SPARC, and may be used only
2225 in code for printing assembler insns and in conditions for
2226 define_optimization. */
2228 /* 1 if X is an fp register. */
2230 #define FP_REG_P(X) (REG_P (X) && REGNO_OK_FOR_FP_P (REGNO (X)))
2232 /* Is X, a REG, an in or global register? i.e. is regno 0..7 or 24..31 */
2233 #define IN_OR_GLOBAL_P(X) (REGNO (X) < 8 || (REGNO (X) >= 24 && REGNO (X) <= 31))
2235 /* Maximum number of registers that can appear in a valid memory address. */
2237 #define MAX_REGS_PER_ADDRESS 2
2239 /* Recognize any constant value that is a valid address.
2240 When PIC, we do not accept an address that would require a scratch reg
2241 to load into a register. */
2243 #define CONSTANT_ADDRESS_P(X) \
2244 (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
2245 || GET_CODE (X) == CONST_INT || GET_CODE (X) == HIGH \
2246 || (GET_CODE (X) == CONST \
2247 && ! (flag_pic && pic_address_needs_scratch (X))))
2249 /* Define this, so that when PIC, reload won't try to reload invalid
2250 addresses which require two reload registers. */
2252 #define LEGITIMATE_PIC_OPERAND_P(X) (! pic_address_needs_scratch (X))
2254 /* Nonzero if the constant value X is a legitimate general operand.
2255 Anything can be made to work except floating point constants.
2256 If TARGET_VIS, 0.0 can be made to work as well. */
2258 #define LEGITIMATE_CONSTANT_P(X) \
2259 (GET_CODE (X) != CONST_DOUBLE || GET_MODE (X) == VOIDmode || \
2261 (GET_MODE (X) == SFmode || GET_MODE (X) == DFmode || \
2262 GET_MODE (X) == TFmode) && \
2263 fp_zero_operand (X, GET_MODE (X))))
2265 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
2266 and check its validity for a certain class.
2267 We have two alternate definitions for each of them.
2268 The usual definition accepts all pseudo regs; the other rejects
2269 them unless they have been allocated suitable hard regs.
2270 The symbol REG_OK_STRICT causes the latter definition to be used.
2272 Most source files want to accept pseudo regs in the hope that
2273 they will get allocated to the class that the insn wants them to be in.
2274 Source files for reload pass need to be strict.
2275 After reload, it makes no difference, since pseudo regs have
2276 been eliminated by then. */
2278 /* Optional extra constraints for this machine.
2280 'Q' handles floating point constants which can be moved into
2281 an integer register with a single sethi instruction.
2283 'R' handles floating point constants which can be moved into
2284 an integer register with a single mov instruction.
2286 'S' handles floating point constants which can be moved into
2287 an integer register using a high/lo_sum sequence.
2289 'T' handles memory addresses where the alignment is known to
2290 be at least 8 bytes.
2292 `U' handles all pseudo registers or a hard even numbered
2293 integer register, needed for ldd/std instructions. */
2295 #define EXTRA_CONSTRAINT_BASE(OP, C) \
2296 ((C) == 'Q' ? fp_sethi_p(OP) \
2297 : (C) == 'R' ? fp_mov_p(OP) \
2298 : (C) == 'S' ? fp_high_losum_p(OP) \
2301 #ifndef REG_OK_STRICT
2303 /* Nonzero if X is a hard reg that can be used as an index
2304 or if it is a pseudo reg. */
2305 #define REG_OK_FOR_INDEX_P(X) \
2306 (((unsigned) REGNO (X)) - 32 >= (FIRST_PSEUDO_REGISTER - 32))
2307 /* Nonzero if X is a hard reg that can be used as a base reg
2308 or if it is a pseudo reg. */
2309 #define REG_OK_FOR_BASE_P(X) \
2310 (((unsigned) REGNO (X)) - 32 >= (FIRST_PSEUDO_REGISTER - 32))
2312 /* 'T', 'U' are for aligned memory loads which aren't needed for v9. */
2314 #define EXTRA_CONSTRAINT(OP, C) \
2315 (EXTRA_CONSTRAINT_BASE(OP, C) \
2316 || ((! TARGET_ARCH64 && (C) == 'T') \
2317 ? (mem_min_alignment (OP, 8)) \
2318 : ((! TARGET_ARCH64 && (C) == 'U') \
2319 ? (register_ok_for_ldd (OP)) \
2324 /* Nonzero if X is a hard reg that can be used as an index. */
2325 #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
2326 /* Nonzero if X is a hard reg that can be used as a base reg. */
2327 #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
2329 #define EXTRA_CONSTRAINT(OP, C) \
2330 (EXTRA_CONSTRAINT_BASE(OP, C) \
2331 || ((! TARGET_ARCH64 && (C) == 'T') \
2332 ? mem_min_alignment (OP, 8) && strict_memory_address_p (Pmode, XEXP (OP, 0)) \
2333 : ((! TARGET_ARCH64 && (C) == 'U') \
2334 ? (GET_CODE (OP) == REG \
2335 && (REGNO (OP) < FIRST_PSEUDO_REGISTER \
2336 || reg_renumber[REGNO (OP)] >= 0) \
2337 && register_ok_for_ldd (OP)) \
2342 /* Should gcc use [%reg+%lo(xx)+offset] addresses? */
2344 #ifdef HAVE_AS_OFFSETABLE_LO10
2345 #define USE_AS_OFFSETABLE_LO10 1
2347 #define USE_AS_OFFSETABLE_LO10 0
2350 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
2351 that is a valid memory address for an instruction.
2352 The MODE argument is the machine mode for the MEM expression
2353 that wants to use this address.
2355 On SPARC, the actual legitimate addresses must be REG+REG or REG+SMALLINT
2356 ordinarily. This changes a bit when generating PIC.
2358 If you change this, execute "rm explow.o recog.o reload.o". */
2360 #define RTX_OK_FOR_BASE_P(X) \
2361 ((GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
2362 || (GET_CODE (X) == SUBREG \
2363 && GET_CODE (SUBREG_REG (X)) == REG \
2364 && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
2366 #define RTX_OK_FOR_INDEX_P(X) \
2367 ((GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X)) \
2368 || (GET_CODE (X) == SUBREG \
2369 && GET_CODE (SUBREG_REG (X)) == REG \
2370 && REG_OK_FOR_INDEX_P (SUBREG_REG (X))))
2372 #define RTX_OK_FOR_OFFSET_P(X) \
2373 (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0x1000)
2375 #define RTX_OK_FOR_OLO10_P(X) \
2376 (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0xc00 - 8)
2378 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
2379 { if (RTX_OK_FOR_BASE_P (X)) \
2381 else if (GET_CODE (X) == PLUS) \
2383 register rtx op0 = XEXP (X, 0); \
2384 register rtx op1 = XEXP (X, 1); \
2385 if (flag_pic && op0 == pic_offset_table_rtx) \
2387 if (RTX_OK_FOR_BASE_P (op1)) \
2389 else if (flag_pic == 1 \
2390 && GET_CODE (op1) != REG \
2391 && GET_CODE (op1) != LO_SUM \
2392 && GET_CODE (op1) != MEM \
2393 && (GET_CODE (op1) != CONST_INT \
2394 || SMALL_INT (op1))) \
2397 else if (RTX_OK_FOR_BASE_P (op0)) \
2399 if ((RTX_OK_FOR_INDEX_P (op1) \
2400 /* We prohibit REG + REG for TFmode when \
2401 there are no instructions which accept \
2402 REG+REG instructions. We do this \
2403 because REG+REG is not an offsetable \
2404 address. If we get the situation \
2405 in reload where source and destination \
2406 of a movtf pattern are both MEMs with \
2407 REG+REG address, then only one of them \
2408 gets converted to an offsetable \
2410 && (MODE != TFmode \
2411 || (TARGET_FPU && TARGET_ARCH64 \
2413 && TARGET_HARD_QUAD))) \
2414 || RTX_OK_FOR_OFFSET_P (op1)) \
2417 else if (RTX_OK_FOR_BASE_P (op1)) \
2419 if ((RTX_OK_FOR_INDEX_P (op0) \
2420 /* See the previous comment. */ \
2421 && (MODE != TFmode \
2422 || (TARGET_FPU && TARGET_ARCH64 \
2424 && TARGET_HARD_QUAD))) \
2425 || RTX_OK_FOR_OFFSET_P (op0)) \
2428 else if (USE_AS_OFFSETABLE_LO10 \
2429 && GET_CODE (op0) == LO_SUM \
2431 && ! TARGET_CM_MEDMID \
2432 && RTX_OK_FOR_OLO10_P (op1)) \
2434 register rtx op00 = XEXP (op0, 0); \
2435 register rtx op01 = XEXP (op0, 1); \
2436 if (RTX_OK_FOR_BASE_P (op00) \
2437 && CONSTANT_P (op01)) \
2440 else if (USE_AS_OFFSETABLE_LO10 \
2441 && GET_CODE (op1) == LO_SUM \
2443 && ! TARGET_CM_MEDMID \
2444 && RTX_OK_FOR_OLO10_P (op0)) \
2446 register rtx op10 = XEXP (op1, 0); \
2447 register rtx op11 = XEXP (op1, 1); \
2448 if (RTX_OK_FOR_BASE_P (op10) \
2449 && CONSTANT_P (op11)) \
2453 else if (GET_CODE (X) == LO_SUM) \
2455 register rtx op0 = XEXP (X, 0); \
2456 register rtx op1 = XEXP (X, 1); \
2457 if (RTX_OK_FOR_BASE_P (op0) \
2458 && CONSTANT_P (op1) \
2459 /* We can't allow TFmode, because an offset \
2460 greater than or equal to the alignment (8) \
2461 may cause the LO_SUM to overflow if !v9. */\
2462 && (MODE != TFmode || TARGET_V9)) \
2465 else if (GET_CODE (X) == CONST_INT && SMALL_INT (X)) \
2469 /* Try machine-dependent ways of modifying an illegitimate address
2470 to be legitimate. If we find one, return the new, valid address.
2471 This macro is used in only one place: `memory_address' in explow.c.
2473 OLDX is the address as it was before break_out_memory_refs was called.
2474 In some cases it is useful to look at this to decide what needs to be done.
2476 MODE and WIN are passed so that this macro can use
2477 GO_IF_LEGITIMATE_ADDRESS.
2479 It is always safe for this macro to do nothing. It exists to recognize
2480 opportunities to optimize the output. */
2482 /* On SPARC, change REG+N into REG+REG, and REG+(X*Y) into REG+REG. */
2483 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
2484 { rtx sparc_x = (X); \
2485 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == MULT) \
2486 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 1), \
2487 force_operand (XEXP (X, 0), NULL_RTX)); \
2488 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == MULT) \
2489 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 0), \
2490 force_operand (XEXP (X, 1), NULL_RTX)); \
2491 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == PLUS) \
2492 (X) = gen_rtx_PLUS (Pmode, force_operand (XEXP (X, 0), NULL_RTX),\
2494 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == PLUS) \
2495 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 0), \
2496 force_operand (XEXP (X, 1), NULL_RTX)); \
2497 if (sparc_x != (X) && memory_address_p (MODE, X)) \
2499 if (flag_pic) (X) = legitimize_pic_address (X, MODE, 0); \
2500 else if (GET_CODE (X) == PLUS && CONSTANT_ADDRESS_P (XEXP (X, 1))) \
2501 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 0), \
2502 copy_to_mode_reg (Pmode, XEXP (X, 1))); \
2503 else if (GET_CODE (X) == PLUS && CONSTANT_ADDRESS_P (XEXP (X, 0))) \
2504 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 1), \
2505 copy_to_mode_reg (Pmode, XEXP (X, 0))); \
2506 else if (GET_CODE (X) == SYMBOL_REF || GET_CODE (X) == CONST \
2507 || GET_CODE (X) == LABEL_REF) \
2508 (X) = copy_to_suggested_reg (X, NULL_RTX, Pmode); \
2509 if (memory_address_p (MODE, X)) \
2512 /* Try a machine-dependent way of reloading an illegitimate address
2513 operand. If we find one, push the reload and jump to WIN. This
2514 macro is used in only one place: `find_reloads_address' in reload.c.
2516 For Sparc 32, we wish to handle addresses by splitting them into
2517 HIGH+LO_SUM pairs, retaining the LO_SUM in the memory reference.
2518 This cuts the number of extra insns by one.
2520 Do nothing when generating PIC code and the address is a
2521 symbolic operand or requires a scratch register. */
2523 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
2525 /* Decompose SImode constants into hi+lo_sum. We do have to \
2526 rerecognize what we produce, so be careful. */ \
2527 if (CONSTANT_P (X) \
2528 && (MODE != TFmode || TARGET_V9) \
2529 && GET_MODE (X) == SImode \
2530 && GET_CODE (X) != LO_SUM && GET_CODE (X) != HIGH \
2532 && (symbolic_operand (X, Pmode) \
2533 || pic_address_needs_scratch (X)))) \
2535 X = gen_rtx_LO_SUM (GET_MODE (X), \
2536 gen_rtx_HIGH (GET_MODE (X), X), X); \
2537 push_reload (XEXP (X, 0), NULL_RTX, &XEXP (X, 0), NULL_PTR, \
2538 BASE_REG_CLASS, GET_MODE (X), VOIDmode, 0, 0, \
2542 /* ??? 64-bit reloads. */ \
2545 /* Go to LABEL if ADDR (a legitimate address expression)
2546 has an effect that depends on the machine mode it is used for.
2547 On the SPARC this is never true. */
2549 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL)
2551 /* If we are referencing a function make the SYMBOL_REF special.
2552 In the Embedded Medium/Anywhere code model, %g4 points to the data segment
2553 so we must not add it to function addresses. */
2555 #define ENCODE_SECTION_INFO(DECL) \
2557 if (TARGET_CM_EMBMEDANY && TREE_CODE (DECL) == FUNCTION_DECL) \
2558 SYMBOL_REF_FLAG (XEXP (DECL_RTL (DECL), 0)) = 1; \
2561 /* Specify the machine mode that this machine uses
2562 for the index in the tablejump instruction. */
2563 /* If we ever implement any of the full models (such as CM_FULLANY),
2564 this has to be DImode in that case */
2565 #ifdef HAVE_GAS_SUBSECTION_ORDERING
2566 #define CASE_VECTOR_MODE \
2567 (! TARGET_PTR64 ? SImode : flag_pic ? SImode : TARGET_CM_MEDLOW ? SImode : DImode)
2569 /* If assembler does not have working .subsection -1, we use DImode for pic, as otherwise
2570 we have to sign extend which slows things down. */
2571 #define CASE_VECTOR_MODE \
2572 (! TARGET_PTR64 ? SImode : flag_pic ? DImode : TARGET_CM_MEDLOW ? SImode : DImode)
2575 /* Define as C expression which evaluates to nonzero if the tablejump
2576 instruction expects the table to contain offsets from the address of the
2578 Do not define this if the table should contain absolute addresses. */
2579 /* #define CASE_VECTOR_PC_RELATIVE 1 */
2581 /* Specify the tree operation to be used to convert reals to integers. */
2582 #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
2584 /* This is the kind of divide that is easiest to do in the general case. */
2585 #define EASY_DIV_EXPR TRUNC_DIV_EXPR
2587 /* Define this as 1 if `char' should by default be signed; else as 0. */
2588 #define DEFAULT_SIGNED_CHAR 1
2590 /* Max number of bytes we can move from memory to memory
2591 in one reasonably fast instruction. */
2594 #if 0 /* Sun 4 has matherr, so this is no good. */
2595 /* This is the value of the error code EDOM for this machine,
2596 used by the sqrt instruction. */
2597 #define TARGET_EDOM 33
2599 /* This is how to refer to the variable errno. */
2600 #define GEN_ERRNO_RTX \
2601 gen_rtx_MEM (SImode, gen_rtx_SYMBOL_REF (Pmode, "errno"))
2604 /* Define if operations between registers always perform the operation
2605 on the full register even if a narrower mode is specified. */
2606 #define WORD_REGISTER_OPERATIONS
2608 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
2609 will either zero-extend or sign-extend. The value of this macro should
2610 be the code that says which one of the two operations is implicitly
2611 done, NIL if none. */
2612 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
2614 /* Nonzero if access to memory by bytes is slow and undesirable.
2615 For RISC chips, it means that access to memory by bytes is no
2616 better than access by words when possible, so grab a whole word
2617 and maybe make use of that. */
2618 #define SLOW_BYTE_ACCESS 1
2620 /* We assume that the store-condition-codes instructions store 0 for false
2621 and some other value for true. This is the value stored for true. */
2623 #define STORE_FLAG_VALUE 1
2625 /* When a prototype says `char' or `short', really pass an `int'. */
2626 #define PROMOTE_PROTOTYPES (TARGET_ARCH32)
2628 /* Define this to be nonzero if shift instructions ignore all but the low-order
2630 #define SHIFT_COUNT_TRUNCATED 1
2632 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
2633 is done just by pretending it is already truncated. */
2634 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
2636 /* Specify the machine mode that pointers have.
2637 After generation of rtl, the compiler makes no further distinction
2638 between pointers and any other objects of this machine mode. */
2639 #define Pmode (TARGET_PTR64 ? DImode : SImode)
2641 /* Generate calls to memcpy, memcmp and memset. */
2642 #define TARGET_MEM_FUNCTIONS
2644 /* Add any extra modes needed to represent the condition code.
2646 On the Sparc, we have a "no-overflow" mode which is used when an add or
2647 subtract insn is used to set the condition code. Different branches are
2648 used in this case for some operations.
2650 We also have two modes to indicate that the relevant condition code is
2651 in the floating-point condition code register. One for comparisons which
2652 will generate an exception if the result is unordered (CCFPEmode) and
2653 one for comparisons which will never trap (CCFPmode).
2655 CCXmode and CCX_NOOVmode are only used by v9. */
2657 #define EXTRA_CC_MODES \
2658 CC(CCXmode, "CCX") \
2659 CC(CC_NOOVmode, "CC_NOOV") \
2660 CC(CCX_NOOVmode, "CCX_NOOV") \
2661 CC(CCFPmode, "CCFP") \
2662 CC(CCFPEmode, "CCFPE")
2664 /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE,
2665 return the mode to be used for the comparison. For floating-point,
2666 CCFP[E]mode is used. CC_NOOVmode should be used when the first operand
2667 is a PLUS, MINUS, NEG, or ASHIFT. CCmode should be used when no special
2668 processing is needed. */
2669 #define SELECT_CC_MODE(OP,X,Y) select_cc_mode ((OP), (X), (Y))
2671 /* Return non-zero if MODE implies a floating point inequality can be
2672 reversed. For Sparc this is always true because we have a full
2673 compliment of ordered and unordered comparisons. */
2674 #define REVERSIBLE_CC_MODE(MODE) 1
2676 /* A function address in a call instruction
2677 is a byte address (for indexing purposes)
2678 so give the MEM rtx a byte's mode. */
2679 #define FUNCTION_MODE SImode
2681 /* Define this if addresses of constant functions
2682 shouldn't be put through pseudo regs where they can be cse'd.
2683 Desirable on machines where ordinary constants are expensive
2684 but a CALL with constant address is cheap. */
2685 #define NO_FUNCTION_CSE
2687 /* alloca should avoid clobbering the old register save area. */
2688 #define SETJMP_VIA_SAVE_AREA
2690 /* Define subroutines to call to handle multiply and divide.
2691 Use the subroutines that Sun's library provides.
2692 The `*' prevents an underscore from being prepended by the compiler. */
2694 #define DIVSI3_LIBCALL "*.div"
2695 #define UDIVSI3_LIBCALL "*.udiv"
2696 #define MODSI3_LIBCALL "*.rem"
2697 #define UMODSI3_LIBCALL "*.urem"
2698 /* .umul is a little faster than .mul. */
2699 #define MULSI3_LIBCALL "*.umul"
2701 /* Define library calls for quad FP operations. These are all part of the
2703 #define ADDTF3_LIBCALL "_Q_add"
2704 #define SUBTF3_LIBCALL "_Q_sub"
2705 #define NEGTF2_LIBCALL "_Q_neg"
2706 #define MULTF3_LIBCALL "_Q_mul"
2707 #define DIVTF3_LIBCALL "_Q_div"
2708 #define FLOATSITF2_LIBCALL "_Q_itoq"
2709 #define FIX_TRUNCTFSI2_LIBCALL "_Q_qtoi"
2710 #define FIXUNS_TRUNCTFSI2_LIBCALL "_Q_qtou"
2711 #define EXTENDSFTF2_LIBCALL "_Q_stoq"
2712 #define TRUNCTFSF2_LIBCALL "_Q_qtos"
2713 #define EXTENDDFTF2_LIBCALL "_Q_dtoq"
2714 #define TRUNCTFDF2_LIBCALL "_Q_qtod"
2715 #define EQTF2_LIBCALL "_Q_feq"
2716 #define NETF2_LIBCALL "_Q_fne"
2717 #define GTTF2_LIBCALL "_Q_fgt"
2718 #define GETF2_LIBCALL "_Q_fge"
2719 #define LTTF2_LIBCALL "_Q_flt"
2720 #define LETF2_LIBCALL "_Q_fle"
2722 /* We can define the TFmode sqrt optab only if TARGET_FPU. This is because
2723 with soft-float, the SFmode and DFmode sqrt instructions will be absent,
2724 and the compiler will notice and try to use the TFmode sqrt instruction
2725 for calls to the builtin function sqrt, but this fails. */
2726 #define INIT_TARGET_OPTABS \
2728 if (TARGET_ARCH32) \
2730 add_optab->handlers[(int) TFmode].libfunc \
2731 = init_one_libfunc (ADDTF3_LIBCALL); \
2732 sub_optab->handlers[(int) TFmode].libfunc \
2733 = init_one_libfunc (SUBTF3_LIBCALL); \
2734 neg_optab->handlers[(int) TFmode].libfunc \
2735 = init_one_libfunc (NEGTF2_LIBCALL); \
2736 smul_optab->handlers[(int) TFmode].libfunc \
2737 = init_one_libfunc (MULTF3_LIBCALL); \
2738 flodiv_optab->handlers[(int) TFmode].libfunc \
2739 = init_one_libfunc (DIVTF3_LIBCALL); \
2740 eqtf2_libfunc = init_one_libfunc (EQTF2_LIBCALL); \
2741 netf2_libfunc = init_one_libfunc (NETF2_LIBCALL); \
2742 gttf2_libfunc = init_one_libfunc (GTTF2_LIBCALL); \
2743 getf2_libfunc = init_one_libfunc (GETF2_LIBCALL); \
2744 lttf2_libfunc = init_one_libfunc (LTTF2_LIBCALL); \
2745 letf2_libfunc = init_one_libfunc (LETF2_LIBCALL); \
2746 trunctfsf2_libfunc = init_one_libfunc (TRUNCTFSF2_LIBCALL); \
2747 trunctfdf2_libfunc = init_one_libfunc (TRUNCTFDF2_LIBCALL); \
2748 extendsftf2_libfunc = init_one_libfunc (EXTENDSFTF2_LIBCALL); \
2749 extenddftf2_libfunc = init_one_libfunc (EXTENDDFTF2_LIBCALL); \
2750 floatsitf_libfunc = init_one_libfunc (FLOATSITF2_LIBCALL); \
2751 fixtfsi_libfunc = init_one_libfunc (FIX_TRUNCTFSI2_LIBCALL); \
2752 fixunstfsi_libfunc \
2753 = init_one_libfunc (FIXUNS_TRUNCTFSI2_LIBCALL); \
2755 sqrt_optab->handlers[(int) TFmode].libfunc \
2756 = init_one_libfunc ("_Q_sqrt"); \
2758 INIT_SUBTARGET_OPTABS; \
2761 /* This is meant to be redefined in the host dependent files */
2762 #define INIT_SUBTARGET_OPTABS
2764 /* Nonzero if a floating point comparison library call for
2765 mode MODE that will return a boolean value. Zero if one
2766 of the libgcc2 functions is used. */
2767 #define FLOAT_LIB_COMPARE_RETURNS_BOOL(MODE, COMPARISON) ((MODE) == TFmode)
2769 /* Compute the cost of computing a constant rtl expression RTX
2770 whose rtx-code is CODE. The body of this macro is a portion
2771 of a switch statement. If the code is computed here,
2772 return it with a return statement. Otherwise, break from the switch. */
2774 #define CONST_COSTS(RTX,CODE,OUTER_CODE) \
2776 if (INTVAL (RTX) < 0x1000 && INTVAL (RTX) >= -0x1000) \
2784 case CONST_DOUBLE: \
2785 if (GET_MODE (RTX) == DImode) \
2786 if ((XINT (RTX, 3) == 0 \
2787 && (unsigned) XINT (RTX, 2) < 0x1000) \
2788 || (XINT (RTX, 3) == -1 \
2789 && XINT (RTX, 2) < 0 \
2790 && XINT (RTX, 2) >= -0x1000)) \
2794 #define ADDRESS_COST(RTX) 1
2796 /* Compute extra cost of moving data between one register class
2798 #define GENERAL_OR_I64(C) ((C) == GENERAL_REGS || (C) == I64_REGS)
2799 #define REGISTER_MOVE_COST(CLASS1, CLASS2) \
2800 (((FP_REG_CLASS_P (CLASS1) && GENERAL_OR_I64 (CLASS2)) \
2801 || (GENERAL_OR_I64 (CLASS1) && FP_REG_CLASS_P (CLASS2)) \
2802 || (CLASS1) == FPCC_REGS || (CLASS2) == FPCC_REGS) \
2803 ? (sparc_cpu == PROCESSOR_ULTRASPARC ? 12 : 6) : 2)
2805 /* Provide the costs of a rtl expression. This is in the body of a
2806 switch on CODE. The purpose for the cost of MULT is to encourage
2807 `synth_mult' to find a synthetic multiply when reasonable.
2809 If we need more than 12 insns to do a multiply, then go out-of-line,
2810 since the call overhead will be < 10% of the cost of the multiply. */
2812 #define RTX_COSTS(X,CODE,OUTER_CODE) \
2814 if (sparc_cpu == PROCESSOR_ULTRASPARC) \
2815 return (GET_MODE (X) == DImode ? \
2816 COSTS_N_INSNS (34) : COSTS_N_INSNS (19)); \
2817 return TARGET_HARD_MUL ? COSTS_N_INSNS (5) : COSTS_N_INSNS (25); \
2822 if (sparc_cpu == PROCESSOR_ULTRASPARC) \
2823 return (GET_MODE (X) == DImode ? \
2824 COSTS_N_INSNS (68) : COSTS_N_INSNS (37)); \
2825 return COSTS_N_INSNS (25); \
2826 /* Make FLOAT and FIX more expensive than CONST_DOUBLE,\
2827 so that cse will favor the latter. */ \
2832 #define ISSUE_RATE sparc_issue_rate()
2834 /* Adjust the cost of dependencies. */
2835 #define ADJUST_COST(INSN,LINK,DEP,COST) \
2836 (COST) = sparc_adjust_cost(INSN, LINK, DEP, COST)
2838 #define MD_SCHED_INIT(DUMP, SCHED_VERBOSE) \
2839 if (sparc_cpu == PROCESSOR_ULTRASPARC) \
2840 ultrasparc_sched_init (DUMP, SCHED_VERBOSE)
2842 #define MD_SCHED_REORDER(DUMP, SCHED_VERBOSE, READY, N_READY, CLOCK, CIM) \
2844 if (sparc_cpu == PROCESSOR_ULTRASPARC) \
2845 ultrasparc_sched_reorder (DUMP, SCHED_VERBOSE, READY, N_READY); \
2849 #define MD_SCHED_VARIABLE_ISSUE(DUMP, SCHED_VERBOSE, INSN, CAN_ISSUE_MORE) \
2851 if (sparc_cpu == PROCESSOR_ULTRASPARC) \
2852 (CAN_ISSUE_MORE) = ultrasparc_variable_issue (INSN); \
2854 (CAN_ISSUE_MORE)--; \
2857 /* Conditional branches with empty delay slots have a length of two. */
2858 #define ADJUST_INSN_LENGTH(INSN, LENGTH) \
2860 if (GET_CODE (INSN) == CALL_INSN \
2861 || (GET_CODE (INSN) == JUMP_INSN && ! simplejump_p (insn))) \
2865 /* Control the assembler format that we output. */
2867 /* Output at beginning of assembler file. */
2869 #define ASM_FILE_START(file)
2871 /* A C string constant describing how to begin a comment in the target
2872 assembler language. The compiler assumes that the comment will end at
2873 the end of the line. */
2875 #define ASM_COMMENT_START "!"
2877 /* Output to assembler file text saying following lines
2878 may contain character constants, extra white space, comments, etc. */
2880 #define ASM_APP_ON ""
2882 /* Output to assembler file text saying following lines
2883 no longer contain unusual constructs. */
2885 #define ASM_APP_OFF ""
2887 /* ??? Try to make the style consistent here (_OP?). */
2889 #define ASM_LONGLONG ".xword"
2890 #define ASM_LONG ".word"
2891 #define ASM_SHORT ".half"
2892 #define ASM_BYTE_OP ".byte"
2893 #define ASM_FLOAT ".single"
2894 #define ASM_DOUBLE ".double"
2895 #define ASM_LONGDOUBLE ".xxx" /* ??? Not known (or used yet). */
2897 /* Output before read-only data. */
2899 #define TEXT_SECTION_ASM_OP ".text"
2901 /* Output before writable data. */
2903 #define DATA_SECTION_ASM_OP ".data"
2905 /* How to refer to registers in assembler output.
2906 This sequence is indexed by compiler's hard-register-number (see above). */
2908 #define REGISTER_NAMES \
2909 {"%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7", \
2910 "%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7", \
2911 "%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7", \
2912 "%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7", \
2913 "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7", \
2914 "%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15", \
2915 "%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23", \
2916 "%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31", \
2917 "%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39", \
2918 "%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47", \
2919 "%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55", \
2920 "%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63", \
2921 "%fcc0", "%fcc1", "%fcc2", "%fcc3", "%icc"}
2923 /* Define additional names for use in asm clobbers and asm declarations. */
2925 #define ADDITIONAL_REGISTER_NAMES \
2926 {{"ccr", SPARC_ICC_REG}, {"cc", SPARC_ICC_REG}}
2928 /* How to renumber registers for dbx and gdb. In the flat model, the frame
2929 pointer is really %i7. */
2931 #define DBX_REGISTER_NUMBER(REGNO) \
2932 (TARGET_FLAT && REGNO == FRAME_POINTER_REGNUM ? 31 : REGNO)
2934 /* On Sun 4, this limit is 2048. We use 1000 to be safe, since the length
2935 can run past this up to a continuation point. Once we used 1500, but
2936 a single entry in C++ can run more than 500 bytes, due to the length of
2937 mangled symbol names. dbxout.c should really be fixed to do
2938 continuations when they are actually needed instead of trying to
2940 #define DBX_CONTIN_LENGTH 1000
2942 /* This is how to output a note to DBX telling it the line number
2943 to which the following sequence of instructions corresponds.
2945 This is needed for SunOS 4.0, and should not hurt for 3.2
2947 #define ASM_OUTPUT_SOURCE_LINE(file, line) \
2948 { static int sym_lineno = 1; \
2949 fprintf (file, ".stabn 68,0,%d,LM%d\nLM%d:\n", \
2950 line, sym_lineno, sym_lineno); \
2953 /* This is how to output the definition of a user-level label named NAME,
2954 such as the label on a static function or variable NAME. */
2956 #define ASM_OUTPUT_LABEL(FILE,NAME) \
2957 do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
2959 /* This is how to output a command to make the user-level label named NAME
2960 defined for reference from other files. */
2962 #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
2963 do { fputs ("\t.global ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
2965 /* The prefix to add to user-visible assembler symbols. */
2967 #define USER_LABEL_PREFIX "_"
2969 /* This is how to output a definition of an internal numbered label where
2970 PREFIX is the class of label and NUM is the number within the class. */
2972 #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
2973 fprintf (FILE, "%s%d:\n", PREFIX, NUM)
2975 /* This is how to store into the string LABEL
2976 the symbol_ref name of an internal numbered label where
2977 PREFIX is the class of label and NUM is the number within the class.
2978 This is suitable for output with `assemble_name'. */
2980 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
2981 sprintf ((LABEL), "*%s%ld", (PREFIX), (long)(NUM))
2983 /* This is how to output an assembler line defining a `float' constant.
2984 We always have to use a .long pseudo-op to do this because the native
2985 SVR4 ELF assembler is buggy and it generates incorrect values when we
2986 try to use the .float pseudo-op instead. */
2988 #define ASM_OUTPUT_FLOAT(FILE,VALUE) \
2992 REAL_VALUE_TO_TARGET_SINGLE ((VALUE), t); \
2993 REAL_VALUE_TO_DECIMAL ((VALUE), "%.20e", str); \
2994 fprintf (FILE, "\t%s\t0x%lx %s ~%s\n", ASM_LONG, t, \
2995 ASM_COMMENT_START, str); \
2998 /* This is how to output an assembler line defining a `double' constant.
2999 We always have to use a .long pseudo-op to do this because the native
3000 SVR4 ELF assembler is buggy and it generates incorrect values when we
3001 try to use the .float pseudo-op instead. */
3003 #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
3007 REAL_VALUE_TO_TARGET_DOUBLE ((VALUE), t); \
3008 REAL_VALUE_TO_DECIMAL ((VALUE), "%.20e", str); \
3009 fprintf (FILE, "\t%s\t0x%lx %s ~%s\n", ASM_LONG, t[0], \
3010 ASM_COMMENT_START, str); \
3011 fprintf (FILE, "\t%s\t0x%lx\n", ASM_LONG, t[1]); \
3014 /* This is how to output an assembler line defining a `long double'
3017 #define ASM_OUTPUT_LONG_DOUBLE(FILE,VALUE) \
3021 REAL_VALUE_TO_TARGET_LONG_DOUBLE ((VALUE), t); \
3022 REAL_VALUE_TO_DECIMAL ((VALUE), "%.20e", str); \
3023 fprintf (FILE, "\t%s\t0x%lx %s ~%s\n", ASM_LONG, t[0], \
3024 ASM_COMMENT_START, str); \
3025 fprintf (FILE, "\t%s\t0x%lx\n", ASM_LONG, t[1]); \
3026 fprintf (FILE, "\t%s\t0x%lx\n", ASM_LONG, t[2]); \
3027 fprintf (FILE, "\t%s\t0x%lx\n", ASM_LONG, t[3]); \
3030 /* This is how to output an assembler line defining an `int' constant. */
3032 #define ASM_OUTPUT_INT(FILE,VALUE) \
3033 ( fprintf (FILE, "\t%s\t", ASM_LONG), \
3034 output_addr_const (FILE, (VALUE)), \
3035 fprintf (FILE, "\n"))
3037 /* This is how to output an assembler line defining a DImode constant. */
3038 #define ASM_OUTPUT_DOUBLE_INT(FILE,VALUE) \
3039 output_double_int (FILE, VALUE)
3041 /* Likewise for `char' and `short' constants. */
3043 #define ASM_OUTPUT_SHORT(FILE,VALUE) \
3044 ( fprintf (FILE, "\t%s\t", ASM_SHORT), \
3045 output_addr_const (FILE, (VALUE)), \
3046 fprintf (FILE, "\n"))
3048 #define ASM_OUTPUT_CHAR(FILE,VALUE) \
3049 ( fprintf (FILE, "\t%s\t", ASM_BYTE_OP), \
3050 output_addr_const (FILE, (VALUE)), \
3051 fprintf (FILE, "\n"))
3053 /* This is how to output an assembler line for a numeric constant byte. */
3055 #define ASM_OUTPUT_BYTE(FILE,VALUE) \
3056 fprintf (FILE, "\t%s\t0x%x\n", ASM_BYTE_OP, (VALUE))
3058 /* This is how we hook in and defer the case-vector until the end of
3060 #define ASM_OUTPUT_ADDR_VEC(LAB,VEC) \
3061 sparc_defer_case_vector ((LAB),(VEC), 0)
3063 #define ASM_OUTPUT_ADDR_DIFF_VEC(LAB,VEC) \
3064 sparc_defer_case_vector ((LAB),(VEC), 1)
3066 /* This is how to output an element of a case-vector that is absolute. */
3068 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
3071 ASM_GENERATE_INTERNAL_LABEL (label, "L", VALUE); \
3072 if (CASE_VECTOR_MODE == SImode) \
3073 fprintf (FILE, "\t.word\t"); \
3075 fprintf (FILE, "\t.xword\t"); \
3076 assemble_name (FILE, label); \
3077 fputc ('\n', FILE); \
3080 /* This is how to output an element of a case-vector that is relative.
3081 (SPARC uses such vectors only when generating PIC.) */
3083 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
3086 ASM_GENERATE_INTERNAL_LABEL (label, "L", (VALUE)); \
3087 if (CASE_VECTOR_MODE == SImode) \
3088 fprintf (FILE, "\t.word\t"); \
3090 fprintf (FILE, "\t.xword\t"); \
3091 assemble_name (FILE, label); \
3092 ASM_GENERATE_INTERNAL_LABEL (label, "L", (REL)); \
3093 fputc ('-', FILE); \
3094 assemble_name (FILE, label); \
3095 fputc ('\n', FILE); \
3098 /* This is what to output before and after case-vector (both
3099 relative and absolute). If .subsection -1 works, we put case-vectors
3100 at the beginning of the current section. */
3102 #ifdef HAVE_GAS_SUBSECTION_ORDERING
3104 #define ASM_OUTPUT_ADDR_VEC_START(FILE) \
3105 fprintf(FILE, "\t.subsection\t-1\n")
3107 #define ASM_OUTPUT_ADDR_VEC_END(FILE) \
3108 fprintf(FILE, "\t.previous\n")
3112 /* This is how to output an assembler line
3113 that says to advance the location counter
3114 to a multiple of 2**LOG bytes. */
3116 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
3118 fprintf (FILE, "\t.align %d\n", (1<<(LOG)))
3120 #define ASM_OUTPUT_SKIP(FILE,SIZE) \
3121 fprintf (FILE, "\t.skip %u\n", (SIZE))
3123 /* This says how to output an assembler line
3124 to define a global common symbol. */
3126 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
3127 ( fputs ("\t.common ", (FILE)), \
3128 assemble_name ((FILE), (NAME)), \
3129 fprintf ((FILE), ",%u,\"bss\"\n", (SIZE)))
3131 /* This says how to output an assembler line to define a local common
3134 #define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGNED) \
3135 ( fputs ("\t.reserve ", (FILE)), \
3136 assemble_name ((FILE), (NAME)), \
3137 fprintf ((FILE), ",%u,\"bss\",%u\n", \
3138 (SIZE), ((ALIGNED) / BITS_PER_UNIT)))
3140 /* A C statement (sans semicolon) to output to the stdio stream
3141 FILE the assembler definition of uninitialized global DECL named
3142 NAME whose size is SIZE bytes and alignment is ALIGN bytes.
3143 Try to use asm_output_aligned_bss to implement this macro. */
3145 #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
3147 fputs (".globl ", (FILE)); \
3148 assemble_name ((FILE), (NAME)); \
3149 fputs ("\n", (FILE)); \
3150 ASM_OUTPUT_ALIGNED_LOCAL (FILE, NAME, SIZE, ALIGN); \
3153 /* Store in OUTPUT a string (made with alloca) containing
3154 an assembler-name for a local static variable named NAME.
3155 LABELNO is an integer which is different for each call. */
3157 #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
3158 ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
3159 sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
3161 #define IDENT_ASM_OP ".ident"
3163 /* Output #ident as a .ident. */
3165 #define ASM_OUTPUT_IDENT(FILE, NAME) \
3166 fprintf (FILE, "\t%s\t\"%s\"\n", IDENT_ASM_OP, NAME);
3168 /* Output code to add DELTA to the first argument, and then jump to FUNCTION.
3169 Used for C++ multiple inheritance. */
3170 #define ASM_OUTPUT_MI_THUNK(FILE, THUNK_FNDECL, DELTA, FUNCTION) \
3172 int big_delta = (DELTA) >= 4096 || (DELTA) < -4096; \
3174 fprintf (FILE, "\tset %d,%%g1\n\tadd %%o0,%%g1,%%o0\n", (DELTA)); \
3175 /* Don't use the jmp solution unless we know the target is local to \
3176 the application or shared object. \
3177 XXX: Wimp out and don't actually check anything except if this is \
3178 an embedded target where we assume there are no shared libs. */ \
3179 if (!TARGET_CM_EMBMEDANY || flag_pic) \
3182 fprintf (FILE, "\tadd %%o0,%d,%%o0\n", DELTA); \
3183 fprintf (FILE, "\tmov %%o7,%%g1\n"); \
3184 fprintf (FILE, "\tcall "); \
3185 assemble_name (FILE, XSTR (XEXP (DECL_RTL (FUNCTION), 0), 0)); \
3186 fprintf (FILE, ",0\n"); \
3188 else if (TARGET_CM_EMBMEDANY) \
3190 fprintf (FILE, "\tsetx "); \
3191 assemble_name (FILE, XSTR (XEXP (DECL_RTL (FUNCTION), 0), 0)); \
3192 fprintf (FILE, ",%%g5,%%g1\n\tjmp %%g1\n"); \
3196 fprintf (FILE, "\tsethi %%hi("); \
3197 assemble_name (FILE, XSTR (XEXP (DECL_RTL (FUNCTION), 0), 0)); \
3198 fprintf (FILE, "),%%g1\n\tjmp %%g1+%%lo("); \
3199 assemble_name (FILE, XSTR (XEXP (DECL_RTL (FUNCTION), 0), 0)); \
3200 fprintf (FILE, ")\n"); \
3202 if (!TARGET_CM_EMBMEDANY || flag_pic) \
3203 fprintf (FILE, "\tmov %%g1,%%o7\n"); \
3204 else if (big_delta) \
3205 fprintf (FILE, "\tnop\n"); \
3207 fprintf (FILE, "\tadd %%o0,%d,%%o0\n", DELTA); \
3210 /* Define the parentheses used to group arithmetic operations
3211 in assembler code. */
3213 #define ASM_OPEN_PAREN "("
3214 #define ASM_CLOSE_PAREN ")"
3216 /* Define results of standard character escape sequences. */
3217 #define TARGET_BELL 007
3218 #define TARGET_BS 010
3219 #define TARGET_TAB 011
3220 #define TARGET_NEWLINE 012
3221 #define TARGET_VT 013
3222 #define TARGET_FF 014
3223 #define TARGET_CR 015
3225 #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \
3226 ((CHAR) == '#' || (CHAR) == '*' || (CHAR) == '^' || (CHAR) == '(' || (CHAR) == '_')
3228 /* Print operand X (an rtx) in assembler syntax to file FILE.
3229 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
3230 For `%' followed by punctuation, CODE is the punctuation and X is null. */
3232 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
3234 /* Print a memory address as an operand to reference that memory location. */
3236 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
3237 { register rtx base, index = 0; \
3239 register rtx addr = ADDR; \
3240 if (GET_CODE (addr) == REG) \
3241 fputs (reg_names[REGNO (addr)], FILE); \
3242 else if (GET_CODE (addr) == PLUS) \
3244 if (GET_CODE (XEXP (addr, 0)) == CONST_INT) \
3245 offset = INTVAL (XEXP (addr, 0)), base = XEXP (addr, 1);\
3246 else if (GET_CODE (XEXP (addr, 1)) == CONST_INT) \
3247 offset = INTVAL (XEXP (addr, 1)), base = XEXP (addr, 0);\
3249 base = XEXP (addr, 0), index = XEXP (addr, 1); \
3250 if (GET_CODE (base) == LO_SUM) \
3252 if (! USE_AS_OFFSETABLE_LO10 \
3254 || TARGET_CM_MEDMID) \
3256 output_operand (XEXP (base, 0), 0); \
3257 fputs ("+%lo(", FILE); \
3258 output_address (XEXP (base, 1)); \
3259 fprintf (FILE, ")+%d", offset); \
3263 fputs (reg_names[REGNO (base)], FILE); \
3265 fprintf (FILE, "%+d", offset); \
3266 else if (GET_CODE (index) == REG) \
3267 fprintf (FILE, "+%s", reg_names[REGNO (index)]); \
3268 else if (GET_CODE (index) == SYMBOL_REF \
3269 || GET_CODE (index) == CONST) \
3270 fputc ('+', FILE), output_addr_const (FILE, index); \
3274 else if (GET_CODE (addr) == MINUS \
3275 && GET_CODE (XEXP (addr, 1)) == LABEL_REF) \
3277 output_addr_const (FILE, XEXP (addr, 0)); \
3278 fputs ("-(", FILE); \
3279 output_addr_const (FILE, XEXP (addr, 1)); \
3280 fputs ("-.)", FILE); \
3282 else if (GET_CODE (addr) == LO_SUM) \
3284 output_operand (XEXP (addr, 0), 0); \
3285 if (TARGET_CM_MEDMID) \
3286 fputs ("+%l44(", FILE); \
3288 fputs ("+%lo(", FILE); \
3289 output_address (XEXP (addr, 1)); \
3290 fputc (')', FILE); \
3292 else if (flag_pic && GET_CODE (addr) == CONST \
3293 && GET_CODE (XEXP (addr, 0)) == MINUS \
3294 && GET_CODE (XEXP (XEXP (addr, 0), 1)) == CONST \
3295 && GET_CODE (XEXP (XEXP (XEXP (addr, 0), 1), 0)) == MINUS \
3296 && XEXP (XEXP (XEXP (XEXP (addr, 0), 1), 0), 1) == pc_rtx) \
3298 addr = XEXP (addr, 0); \
3299 output_addr_const (FILE, XEXP (addr, 0)); \
3300 /* Group the args of the second CONST in parenthesis. */ \
3301 fputs ("-(", FILE); \
3302 /* Skip past the second CONST--it does nothing for us. */\
3303 output_addr_const (FILE, XEXP (XEXP (addr, 1), 0)); \
3304 /* Close the parenthesis. */ \
3305 fputc (')', FILE); \
3309 output_addr_const (FILE, addr); \
3313 /* Define the codes that are matched by predicates in sparc.c. */
3315 #define PREDICATE_CODES \
3316 {"reg_or_0_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3317 {"fp_zero_operand", {CONST_DOUBLE}}, \
3318 {"fp_sethi_p", {CONST_DOUBLE}}, \
3319 {"fp_mov_p", {CONST_DOUBLE}}, \
3320 {"fp_high_losum_p", {CONST_DOUBLE}}, \
3321 {"intreg_operand", {SUBREG, REG}}, \
3322 {"fcc_reg_operand", {REG}}, \
3323 {"icc_or_fcc_reg_operand", {REG}}, \
3324 {"restore_operand", {REG}}, \
3325 {"call_operand", {MEM}}, \
3326 {"call_operand_address", {SYMBOL_REF, LABEL_REF, CONST, CONST_DOUBLE, \
3327 ADDRESSOF, SUBREG, REG, PLUS, LO_SUM, CONST_INT}}, \
3328 {"symbolic_operand", {SYMBOL_REF, LABEL_REF, CONST}}, \
3329 {"symbolic_memory_operand", {SUBREG, MEM}}, \
3330 {"label_ref_operand", {LABEL_REF}}, \
3331 {"sp64_medium_pic_operand", {CONST}}, \
3332 {"data_segment_operand", {SYMBOL_REF, PLUS, CONST}}, \
3333 {"text_segment_operand", {LABEL_REF, SYMBOL_REF, PLUS, CONST}}, \
3334 {"reg_or_nonsymb_mem_operand", {SUBREG, REG, MEM}}, \
3335 {"splittable_symbolic_memory_operand", {MEM}}, \
3336 {"splittable_immediate_memory_operand", {MEM}}, \
3337 {"eq_or_neq", {EQ, NE}}, \
3338 {"normal_comp_operator", {GE, GT, LE, LT, GTU, LEU}}, \
3339 {"noov_compare_op", {NE, EQ, GE, GT, LE, LT, GEU, GTU, LEU, LTU}}, \
3340 {"v9_regcmp_op", {EQ, NE, GE, LT, LE, GT}}, \
3341 {"extend_op", {SIGN_EXTEND, ZERO_EXTEND}}, \
3342 {"cc_arithop", {AND, IOR, XOR}}, \
3343 {"cc_arithopn", {AND, IOR}}, \
3344 {"arith_operand", {SUBREG, REG, CONST_INT}}, \
3345 {"arith_add_operand", {SUBREG, REG, CONST_INT}}, \
3346 {"arith11_operand", {SUBREG, REG, CONST_INT}}, \
3347 {"arith10_operand", {SUBREG, REG, CONST_INT}}, \
3348 {"arith_double_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3349 {"arith_double_add_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3350 {"arith11_double_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3351 {"arith10_double_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3352 {"small_int", {CONST_INT}}, \
3353 {"small_int_or_double", {CONST_INT, CONST_DOUBLE}}, \
3354 {"uns_small_int", {CONST_INT}}, \
3355 {"uns_arith_operand", {SUBREG, REG, CONST_INT}}, \
3356 {"clobbered_register", {REG}}, \
3357 {"input_operand", {SUBREG, REG, CONST_INT, MEM, CONST}}, \
3358 {"const64_operand", {CONST_INT, CONST_DOUBLE}}, \
3359 {"const64_high_operand", {CONST_INT, CONST_DOUBLE}},
3361 /* The number of Pmode words for the setjmp buffer. */
3362 #define JMP_BUF_SIZE 12
3364 #define DONT_ACCESS_GBLS_AFTER_EPILOGUE (flag_pic)
3366 /* Defined in flags.h, but insn-emit.c does not include flags.h. */
3368 extern int flag_pic;
OSDN Git Service
