1 /* Definitions of target machine for GNU compiler, for Sun SPARC.
2 Copyright (C) 1987, 1988, 1989, 1992, 1994, 1995, 1996, 1997, 1998, 1999
3 2000, 2001, 2002 Free Software Foundation, Inc.
4 Contributed by Michael Tiemann (tiemann@cygnus.com).
5 64 bit SPARC V9 support by Michael Tiemann, Jim Wilson, and Doug Evans,
8 This file is part of GNU CC.
10 GNU CC is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2, or (at your option)
15 GNU CC is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with GNU CC; see the file COPYING. If not, write to
22 the Free Software Foundation, 59 Temple Place - Suite 330,
23 Boston, MA 02111-1307, USA. */
25 /* Note that some other tm.h files include this one and then override
26 whatever definitions are necessary. */
28 /* Specify this in a cover file to provide bi-architecture (32/64) support. */
29 /* #define SPARC_BI_ARCH */
31 /* Macro used later in this file to determine default architecture. */
32 #define DEFAULT_ARCH32_P ((TARGET_DEFAULT & MASK_64BIT) == 0)
34 /* TARGET_ARCH{32,64} are the main macros to decide which of the two
35 architectures to compile for. We allow targets to choose compile time or
38 #if defined(__sparcv9) || defined(__arch64__)
39 #define TARGET_ARCH32 0
41 #define TARGET_ARCH32 1
45 #define TARGET_ARCH32 (! TARGET_64BIT)
47 #define TARGET_ARCH32 (DEFAULT_ARCH32_P)
48 #endif /* SPARC_BI_ARCH */
49 #endif /* IN_LIBGCC2 */
50 #define TARGET_ARCH64 (! TARGET_ARCH32)
52 /* Code model selection.
53 -mcmodel is used to select the v9 code model.
54 Different code models aren't supported for v7/8 code.
56 TARGET_CM_32: 32 bit address space, top 32 bits = 0,
57 pointers are 32 bits. Note that this isn't intended
60 TARGET_CM_MEDLOW: 32 bit address space, top 32 bits = 0,
61 avoid generating %uhi and %ulo terms,
64 TARGET_CM_MEDMID: 64 bit address space.
65 The executable must be in the low 16 TB of memory.
66 This corresponds to the low 44 bits, and the %[hml]44
67 relocs are used. The text segment has a maximum size
70 TARGET_CM_MEDANY: 64 bit address space.
71 The text and data segments have a maximum size of 31
72 bits and may be located anywhere. The maximum offset
73 from any instruction to the label _GLOBAL_OFFSET_TABLE_
76 TARGET_CM_EMBMEDANY: 64 bit address space.
77 The text and data segments have a maximum size of 31 bits
78 and may be located anywhere. Register %g4 contains
79 the start address of the data segment.
90 /* Value of -mcmodel specified by user. */
91 extern const char *sparc_cmodel_string;
93 extern enum cmodel sparc_cmodel;
95 /* V9 code model selection. */
96 #define TARGET_CM_MEDLOW (sparc_cmodel == CM_MEDLOW)
97 #define TARGET_CM_MEDMID (sparc_cmodel == CM_MEDMID)
98 #define TARGET_CM_MEDANY (sparc_cmodel == CM_MEDANY)
99 #define TARGET_CM_EMBMEDANY (sparc_cmodel == CM_EMBMEDANY)
101 #define SPARC_DEFAULT_CMODEL CM_32
103 /* This is call-clobbered in the normal ABI, but is reserved in the
104 home grown (aka upward compatible) embedded ABI. */
105 #define EMBMEDANY_BASE_REG "%g4"
107 /* Values of TARGET_CPU_DEFAULT, set via -D in the Makefile,
108 and specified by the user via --with-cpu=foo.
109 This specifies the cpu implementation, not the architecture size. */
110 /* Note that TARGET_CPU_v9 is assumed to start the list of 64-bit
112 #define TARGET_CPU_sparc 0
113 #define TARGET_CPU_v7 0 /* alias for previous */
114 #define TARGET_CPU_sparclet 1
115 #define TARGET_CPU_sparclite 2
116 #define TARGET_CPU_v8 3 /* generic v8 implementation */
117 #define TARGET_CPU_supersparc 4
118 #define TARGET_CPU_hypersparc 5
119 #define TARGET_CPU_sparc86x 6
120 #define TARGET_CPU_sparclite86x 6
121 #define TARGET_CPU_v9 7 /* generic v9 implementation */
122 #define TARGET_CPU_sparcv9 7 /* alias */
123 #define TARGET_CPU_sparc64 7 /* alias */
124 #define TARGET_CPU_ultrasparc 8
125 #define TARGET_CPU_ultrasparc3 9
127 #if TARGET_CPU_DEFAULT == TARGET_CPU_v9 \
128 || TARGET_CPU_DEFAULT == TARGET_CPU_ultrasparc \
129 || TARGET_CPU_DEFAULT == TARGET_CPU_ultrasparc3
131 #define CPP_CPU32_DEFAULT_SPEC ""
132 #define ASM_CPU32_DEFAULT_SPEC ""
134 #if TARGET_CPU_DEFAULT == TARGET_CPU_v9
135 /* ??? What does Sun's CC pass? */
136 #define CPP_CPU64_DEFAULT_SPEC "-D__sparc_v9__"
137 /* ??? It's not clear how other assemblers will handle this, so by default
138 use GAS. Sun's Solaris assembler recognizes -xarch=v8plus, but this case
139 is handled in sol2.h. */
140 #define ASM_CPU64_DEFAULT_SPEC "-Av9"
142 #if TARGET_CPU_DEFAULT == TARGET_CPU_ultrasparc
143 #define CPP_CPU64_DEFAULT_SPEC "-D__sparc_v9__"
144 #define ASM_CPU64_DEFAULT_SPEC "-Av9a"
146 #if TARGET_CPU_DEFAULT == TARGET_CPU_ultrasparc3
147 #define CPP_CPU64_DEFAULT_SPEC "-D__sparc_v9__"
148 #define ASM_CPU64_DEFAULT_SPEC "-Av9b"
153 #define CPP_CPU64_DEFAULT_SPEC ""
154 #define ASM_CPU64_DEFAULT_SPEC ""
156 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparc \
157 || TARGET_CPU_DEFAULT == TARGET_CPU_v8
158 #define CPP_CPU32_DEFAULT_SPEC ""
159 #define ASM_CPU32_DEFAULT_SPEC ""
162 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparclet
163 #define CPP_CPU32_DEFAULT_SPEC "-D__sparclet__"
164 #define ASM_CPU32_DEFAULT_SPEC "-Asparclet"
167 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparclite
168 #define CPP_CPU32_DEFAULT_SPEC "-D__sparclite__"
169 #define ASM_CPU32_DEFAULT_SPEC "-Asparclite"
172 #if TARGET_CPU_DEFAULT == TARGET_CPU_supersparc
173 #define CPP_CPU32_DEFAULT_SPEC "-D__supersparc__ -D__sparc_v8__"
174 #define ASM_CPU32_DEFAULT_SPEC ""
177 #if TARGET_CPU_DEFAULT == TARGET_CPU_hypersparc
178 #define CPP_CPU32_DEFAULT_SPEC "-D__hypersparc__ -D__sparc_v8__"
179 #define ASM_CPU32_DEFAULT_SPEC ""
182 #if TARGET_CPU_DEFAULT == TARGET_CPU_sparclite86x
183 #define CPP_CPU32_DEFAULT_SPEC "-D__sparclite86x__"
184 #define ASM_CPU32_DEFAULT_SPEC "-Asparclite"
189 #if !defined(CPP_CPU32_DEFAULT_SPEC) || !defined(CPP_CPU64_DEFAULT_SPEC)
190 Unrecognized value in TARGET_CPU_DEFAULT.
195 #define CPP_CPU_DEFAULT_SPEC \
196 (DEFAULT_ARCH32_P ? "\
197 %{m64:" CPP_CPU64_DEFAULT_SPEC "} \
198 %{!m64:" CPP_CPU32_DEFAULT_SPEC "} \
200 %{m32:" CPP_CPU32_DEFAULT_SPEC "} \
201 %{!m32:" CPP_CPU64_DEFAULT_SPEC "} \
203 #define ASM_CPU_DEFAULT_SPEC \
204 (DEFAULT_ARCH32_P ? "\
205 %{m64:" ASM_CPU64_DEFAULT_SPEC "} \
206 %{!m64:" ASM_CPU32_DEFAULT_SPEC "} \
208 %{m32:" ASM_CPU32_DEFAULT_SPEC "} \
209 %{!m32:" ASM_CPU64_DEFAULT_SPEC "} \
212 #else /* !SPARC_BI_ARCH */
214 #define CPP_CPU_DEFAULT_SPEC (DEFAULT_ARCH32_P ? CPP_CPU32_DEFAULT_SPEC : CPP_CPU64_DEFAULT_SPEC)
215 #define ASM_CPU_DEFAULT_SPEC (DEFAULT_ARCH32_P ? ASM_CPU32_DEFAULT_SPEC : ASM_CPU64_DEFAULT_SPEC)
217 #endif /* !SPARC_BI_ARCH */
219 /* Define macros to distinguish architectures. */
221 /* Common CPP definitions used by CPP_SPEC amongst the various targets
222 for handling -mcpu=xxx switches. */
223 #define CPP_CPU_SPEC "\
224 %{msoft-float:-D_SOFT_FLOAT} \
226 %{msparclite:-D__sparclite__} \
227 %{mf930:-D__sparclite__} %{mf934:-D__sparclite__} \
228 %{mv8:-D__sparc_v8__} \
229 %{msupersparc:-D__supersparc__ -D__sparc_v8__} \
230 %{mcpu=sparclet:-D__sparclet__} %{mcpu=tsc701:-D__sparclet__} \
231 %{mcpu=sparclite:-D__sparclite__} \
232 %{mcpu=f930:-D__sparclite__} %{mcpu=f934:-D__sparclite__} \
233 %{mcpu=v8:-D__sparc_v8__} \
234 %{mcpu=supersparc:-D__supersparc__ -D__sparc_v8__} \
235 %{mcpu=hypersparc:-D__hypersparc__ -D__sparc_v8__} \
236 %{mcpu=sparclite86x:-D__sparclite86x__} \
237 %{mcpu=v9:-D__sparc_v9__} \
238 %{mcpu=ultrasparc:-D__sparc_v9__} \
239 %{mcpu=ultrasparc3:-D__sparc_v9__} \
240 %{!mcpu*:%{!mcypress:%{!msparclite:%{!mf930:%{!mf934:%{!mv8:%{!msupersparc:%(cpp_cpu_default)}}}}}}} \
243 /* ??? The GCC_NEW_VARARGS macro is now obsolete, because gcc always uses
244 the right varags.h file when bootstrapping. */
245 /* ??? It's not clear what value we want to use for -Acpu/machine for
246 sparc64 in 32 bit environments, so for now we only use `sparc64' in
247 64 bit environments. */
249 #define CPP_ARCH32_SPEC "-D__GCC_NEW_VARARGS__ -Acpu=sparc -Amachine=sparc"
250 #define CPP_ARCH64_SPEC "-D__arch64__ -Acpu=sparc64 -Amachine=sparc64"
252 #define CPP_ARCH_DEFAULT_SPEC \
253 (DEFAULT_ARCH32_P ? CPP_ARCH32_SPEC : CPP_ARCH64_SPEC)
255 #define CPP_ARCH_SPEC "\
256 %{m32:%(cpp_arch32)} \
257 %{m64:%(cpp_arch64)} \
258 %{!m32:%{!m64:%(cpp_arch_default)}} \
261 /* Macros to distinguish endianness. */
262 #define CPP_ENDIAN_SPEC "\
263 %{mlittle-endian:-D__LITTLE_ENDIAN__} \
264 %{mlittle-endian-data:-D__LITTLE_ENDIAN_DATA__}"
266 /* Macros to distinguish the particular subtarget. */
267 #define CPP_SUBTARGET_SPEC ""
269 #define CPP_SPEC "%(cpp_cpu) %(cpp_arch) %(cpp_endian) %(cpp_subtarget)"
271 /* Prevent error on `-sun4' and `-target sun4' options. */
272 /* This used to translate -dalign to -malign, but that is no good
273 because it can't turn off the usual meaning of making debugging dumps. */
274 /* Translate old style -m<cpu> into new style -mcpu=<cpu>.
275 ??? Delete support for -m<cpu> for 2.9. */
278 %{sun4:} %{target:} \
279 %{mcypress:-mcpu=cypress} \
280 %{msparclite:-mcpu=sparclite} %{mf930:-mcpu=f930} %{mf934:-mcpu=f934} \
281 %{mv8:-mcpu=v8} %{msupersparc:-mcpu=supersparc} \
284 /* Override in target specific files. */
285 #define ASM_CPU_SPEC "\
286 %{mcpu=sparclet:-Asparclet} %{mcpu=tsc701:-Asparclet} \
287 %{msparclite:-Asparclite} \
288 %{mf930:-Asparclite} %{mf934:-Asparclite} \
289 %{mcpu=sparclite:-Asparclite} \
290 %{mcpu=sparclite86x:-Asparclite} \
291 %{mcpu=f930:-Asparclite} %{mcpu=f934:-Asparclite} \
292 %{mv8plus:-Av8plus} \
294 %{mcpu=ultrasparc:%{!mv8plus:-Av9a}} \
295 %{mcpu=ultrasparc3:%{!mv8plus:-Av9b}} \
296 %{!mcpu*:%{!mcypress:%{!msparclite:%{!mf930:%{!mf934:%{!mv8:%{!msupersparc:%(asm_cpu_default)}}}}}}} \
299 /* Word size selection, among other things.
300 This is what GAS uses. Add %(asm_arch) to ASM_SPEC to enable. */
302 #define ASM_ARCH32_SPEC "-32"
303 #ifdef HAVE_AS_REGISTER_PSEUDO_OP
304 #define ASM_ARCH64_SPEC "-64 -no-undeclared-regs"
306 #define ASM_ARCH64_SPEC "-64"
308 #define ASM_ARCH_DEFAULT_SPEC \
309 (DEFAULT_ARCH32_P ? ASM_ARCH32_SPEC : ASM_ARCH64_SPEC)
311 #define ASM_ARCH_SPEC "\
312 %{m32:%(asm_arch32)} \
313 %{m64:%(asm_arch64)} \
314 %{!m32:%{!m64:%(asm_arch_default)}} \
317 #ifdef HAVE_AS_RELAX_OPTION
318 #define ASM_RELAX_SPEC "%{!mno-relax:-relax}"
320 #define ASM_RELAX_SPEC ""
323 /* Special flags to the Sun-4 assembler when using pipe for input. */
326 %| %{R} %{!pg:%{!p:%{fpic:-k} %{fPIC:-k}}} %{keep-local-as-symbols:-L} \
327 %(asm_cpu) %(asm_relax)"
329 /* This macro defines names of additional specifications to put in the specs
330 that can be used in various specifications like CC1_SPEC. Its definition
331 is an initializer with a subgrouping for each command option.
333 Each subgrouping contains a string constant, that defines the
334 specification name, and a string constant that used by the GNU CC driver
337 Do not define this macro if it does not need to do anything. */
339 #define EXTRA_SPECS \
340 { "cpp_cpu", CPP_CPU_SPEC }, \
341 { "cpp_cpu_default", CPP_CPU_DEFAULT_SPEC }, \
342 { "cpp_arch32", CPP_ARCH32_SPEC }, \
343 { "cpp_arch64", CPP_ARCH64_SPEC }, \
344 { "cpp_arch_default", CPP_ARCH_DEFAULT_SPEC },\
345 { "cpp_arch", CPP_ARCH_SPEC }, \
346 { "cpp_endian", CPP_ENDIAN_SPEC }, \
347 { "cpp_subtarget", CPP_SUBTARGET_SPEC }, \
348 { "asm_cpu", ASM_CPU_SPEC }, \
349 { "asm_cpu_default", ASM_CPU_DEFAULT_SPEC }, \
350 { "asm_arch32", ASM_ARCH32_SPEC }, \
351 { "asm_arch64", ASM_ARCH64_SPEC }, \
352 { "asm_relax", ASM_RELAX_SPEC }, \
353 { "asm_arch_default", ASM_ARCH_DEFAULT_SPEC },\
354 { "asm_arch", ASM_ARCH_SPEC }, \
355 SUBTARGET_EXTRA_SPECS
357 #define SUBTARGET_EXTRA_SPECS
359 /* Because libgcc can generate references back to libc (via .umul etc.) we have
360 to list libc again after the second libgcc. */
361 #define LINK_GCC_C_SEQUENCE_SPEC "%G %L %G %L"
364 #define PTRDIFF_TYPE (TARGET_ARCH64 ? "long int" : "int")
365 #define SIZE_TYPE (TARGET_ARCH64 ? "long unsigned int" : "unsigned int")
367 /* ??? This should be 32 bits for v9 but what can we do? */
368 #define WCHAR_TYPE "short unsigned int"
369 #define WCHAR_TYPE_SIZE 16
371 /* Show we can debug even without a frame pointer. */
372 #define CAN_DEBUG_WITHOUT_FP
374 #define OVERRIDE_OPTIONS sparc_override_options ()
376 /* Generate DBX debugging information. */
378 #define DBX_DEBUGGING_INFO
380 /* Run-time compilation parameters selecting different hardware subsets. */
382 extern int target_flags;
384 /* Nonzero if we should generate code to use the fpu. */
386 #define TARGET_FPU (target_flags & MASK_FPU)
388 /* Nonzero if we should assume that double pointers might be unaligned.
389 This can happen when linking gcc compiled code with other compilers,
390 because the ABI only guarantees 4 byte alignment. */
391 #define MASK_UNALIGNED_DOUBLES 4
392 #define TARGET_UNALIGNED_DOUBLES (target_flags & MASK_UNALIGNED_DOUBLES)
394 /* Nonzero means that we should generate code for a v8 sparc. */
396 #define TARGET_V8 (target_flags & MASK_V8)
398 /* Nonzero means that we should generate code for a sparclite.
399 This enables the sparclite specific instructions, but does not affect
400 whether FPU instructions are emitted. */
401 #define MASK_SPARCLITE 0x10
402 #define TARGET_SPARCLITE (target_flags & MASK_SPARCLITE)
404 /* Nonzero if we're compiling for the sparclet. */
405 #define MASK_SPARCLET 0x20
406 #define TARGET_SPARCLET (target_flags & MASK_SPARCLET)
408 /* Nonzero if we're compiling for v9 sparc.
409 Note that v9's can run in 32 bit mode so this doesn't necessarily mean
410 the word size is 64. */
412 #define TARGET_V9 (target_flags & MASK_V9)
414 /* Non-zero to generate code that uses the instructions deprecated in
415 the v9 architecture. This option only applies to v9 systems. */
416 /* ??? This isn't user selectable yet. It's used to enable such insns
417 on 32 bit v9 systems and for the moment they're permanently disabled
418 on 64 bit v9 systems. */
419 #define MASK_DEPRECATED_V8_INSNS 0x80
420 #define TARGET_DEPRECATED_V8_INSNS (target_flags & MASK_DEPRECATED_V8_INSNS)
422 /* Mask of all CPU selection flags. */
424 (MASK_V8 + MASK_SPARCLITE + MASK_SPARCLET + MASK_V9 + MASK_DEPRECATED_V8_INSNS)
426 /* Non-zero means don't pass `-assert pure-text' to the linker. */
427 #define MASK_IMPURE_TEXT 0x100
428 #define TARGET_IMPURE_TEXT (target_flags & MASK_IMPURE_TEXT)
430 /* Nonzero means that we should generate code using a flat register window
431 model, i.e. no save/restore instructions are generated, which is
432 compatible with normal sparc code.
433 The frame pointer is %i7 instead of %fp. */
434 #define MASK_FLAT 0x200
435 #define TARGET_FLAT (target_flags & MASK_FLAT)
437 /* Nonzero means use the registers that the Sparc ABI reserves for
438 application software. This must be the default to coincide with the
439 setting in FIXED_REGISTERS. */
440 #define MASK_APP_REGS 0x400
441 #define TARGET_APP_REGS (target_flags & MASK_APP_REGS)
443 /* Option to select how quad word floating point is implemented.
444 When TARGET_HARD_QUAD is true, we use the hardware quad instructions.
445 Otherwise, we use the SPARC ABI quad library functions. */
446 #define MASK_HARD_QUAD 0x800
447 #define TARGET_HARD_QUAD (target_flags & MASK_HARD_QUAD)
449 /* Non-zero on little-endian machines. */
450 /* ??? Little endian support currently only exists for sparclet-aout and
451 sparc64-elf configurations. May eventually want to expand the support
452 to all targets, but for now it's kept local to only those two. */
453 #define MASK_LITTLE_ENDIAN 0x1000
454 #define TARGET_LITTLE_ENDIAN (target_flags & MASK_LITTLE_ENDIAN)
456 /* 0x2000, 0x4000 are unused */
458 /* Nonzero if pointers are 64 bits. */
459 #define MASK_PTR64 0x8000
460 #define TARGET_PTR64 (target_flags & MASK_PTR64)
462 /* Nonzero if generating code to run in a 64 bit environment.
463 This is intended to only be used by TARGET_ARCH{32,64} as they are the
464 mechanism used to control compile time or run time selection. */
465 #define MASK_64BIT 0x10000
466 #define TARGET_64BIT (target_flags & MASK_64BIT)
468 /* 0x20000,0x40000 unused */
470 /* Non-zero means use a stack bias of 2047. Stack offsets are obtained by
471 adding 2047 to %sp. This option is for v9 only and is the default. */
472 #define MASK_STACK_BIAS 0x80000
473 #define TARGET_STACK_BIAS (target_flags & MASK_STACK_BIAS)
475 /* 0x100000,0x200000 unused */
477 /* Non-zero means -m{,no-}fpu was passed on the command line. */
478 #define MASK_FPU_SET 0x400000
479 #define TARGET_FPU_SET (target_flags & MASK_FPU_SET)
481 /* Use the UltraSPARC Visual Instruction Set extensions. */
482 #define MASK_VIS 0x1000000
483 #define TARGET_VIS (target_flags & MASK_VIS)
485 /* Compile for Solaris V8+. 32 bit Solaris preserves the high bits of
486 the current out and global registers and Linux 2.2+ as well. */
487 #define MASK_V8PLUS 0x2000000
488 #define TARGET_V8PLUS (target_flags & MASK_V8PLUS)
490 /* Force a the fastest alignment on structures to take advantage of
492 #define MASK_FASTER_STRUCTS 0x4000000
493 #define TARGET_FASTER_STRUCTS (target_flags & MASK_FASTER_STRUCTS)
495 /* Use IEEE quad long double. */
496 #define MASK_LONG_DOUBLE_128 0x8000000
497 #define TARGET_LONG_DOUBLE_128 (target_flags & MASK_LONG_DOUBLE_128)
499 /* TARGET_HARD_MUL: Use hardware multiply instructions but not %y.
500 TARGET_HARD_MUL32: Use hardware multiply instructions with rd %y
501 to get high 32 bits. False in V8+ or V9 because multiply stores
502 a 64 bit result in a register. */
504 #define TARGET_HARD_MUL32 \
505 ((TARGET_V8 || TARGET_SPARCLITE \
506 || TARGET_SPARCLET || TARGET_DEPRECATED_V8_INSNS) \
507 && ! TARGET_V8PLUS && TARGET_ARCH32)
509 #define TARGET_HARD_MUL \
510 (TARGET_V8 || TARGET_SPARCLITE || TARGET_SPARCLET \
511 || TARGET_DEPRECATED_V8_INSNS || TARGET_V8PLUS)
514 /* Macro to define tables used to set the flags.
515 This is a list in braces of pairs in braces,
516 each pair being { "NAME", VALUE }
517 where VALUE is the bits to set or minus the bits to clear.
518 An empty string NAME is used to identify the default VALUE. */
520 #define TARGET_SWITCHES \
521 { {"fpu", MASK_FPU | MASK_FPU_SET, \
522 N_("Use hardware fp") }, \
523 {"no-fpu", -MASK_FPU, \
524 N_("Do not use hardware fp") }, \
525 {"no-fpu", MASK_FPU_SET, NULL, }, \
526 {"hard-float", MASK_FPU | MASK_FPU_SET, \
527 N_("Use hardware fp") }, \
528 {"soft-float", -MASK_FPU, \
529 N_("Do not use hardware fp") }, \
530 {"soft-float", MASK_FPU_SET, NULL }, \
531 {"unaligned-doubles", MASK_UNALIGNED_DOUBLES, \
532 N_("Assume possible double misalignment") }, \
533 {"no-unaligned-doubles", -MASK_UNALIGNED_DOUBLES, \
534 N_("Assume all doubles are aligned") }, \
535 {"impure-text", MASK_IMPURE_TEXT, \
536 N_("Pass -assert pure-text to linker") }, \
537 {"no-impure-text", -MASK_IMPURE_TEXT, \
538 N_("Do not pass -assert pure-text to linker") }, \
539 {"flat", MASK_FLAT, \
540 N_("Use flat register window model") }, \
541 {"no-flat", -MASK_FLAT, \
542 N_("Do not use flat register window model") }, \
543 {"app-regs", MASK_APP_REGS, \
544 N_("Use ABI reserved registers") }, \
545 {"no-app-regs", -MASK_APP_REGS, \
546 N_("Do not use ABI reserved registers") }, \
547 {"hard-quad-float", MASK_HARD_QUAD, \
548 N_("Use hardware quad fp instructions") }, \
549 {"soft-quad-float", -MASK_HARD_QUAD, \
550 N_("Do not use hardware quad fp instructions") }, \
551 {"v8plus", MASK_V8PLUS, \
552 N_("Compile for v8plus ABI") }, \
553 {"no-v8plus", -MASK_V8PLUS, \
554 N_("Do not compile for v8plus ABI") }, \
556 N_("Utilize Visual Instruction Set") }, \
557 {"no-vis", -MASK_VIS, \
558 N_("Do not utilize Visual Instruction Set") }, \
559 /* ??? These are deprecated, coerced to -mcpu=. Delete in 2.9. */ \
561 N_("Optimize for Cypress processors") }, \
563 N_("Optimize for SparcLite processors") }, \
565 N_("Optimize for F930 processors") }, \
567 N_("Optimize for F934 processors") }, \
569 N_("Use V8 Sparc ISA") }, \
571 N_("Optimize for SuperSparc processors") }, \
572 /* End of deprecated options. */ \
573 {"ptr64", MASK_PTR64, \
574 N_("Pointers are 64-bit") }, \
575 {"ptr32", -MASK_PTR64, \
576 N_("Pointers are 32-bit") }, \
577 {"32", -MASK_64BIT, \
578 N_("Use 32-bit ABI") }, \
580 N_("Use 64-bit ABI") }, \
581 {"stack-bias", MASK_STACK_BIAS, \
582 N_("Use stack bias") }, \
583 {"no-stack-bias", -MASK_STACK_BIAS, \
584 N_("Do not use stack bias") }, \
585 {"faster-structs", MASK_FASTER_STRUCTS, \
586 N_("Use structs on stronger alignment for double-word copies") }, \
587 {"no-faster-structs", -MASK_FASTER_STRUCTS, \
588 N_("Do not use structs on stronger alignment for double-word copies") }, \
590 N_("Optimize tail call instructions in assembler and linker") }, \
592 N_("Do not optimize tail call instructions in assembler or linker") }, \
594 { "", TARGET_DEFAULT, ""}}
596 /* MASK_APP_REGS must always be the default because that's what
597 FIXED_REGISTERS is set to and -ffixed- is processed before
598 CONDITIONAL_REGISTER_USAGE is called (where we process -mno-app-regs). */
599 #define TARGET_DEFAULT (MASK_APP_REGS + MASK_FPU)
601 /* This is meant to be redefined in target specific files. */
602 #define SUBTARGET_SWITCHES
605 These must match the values for the cpu attribute in sparc.md. */
606 enum processor_type {
610 PROCESSOR_SUPERSPARC,
614 PROCESSOR_HYPERSPARC,
615 PROCESSOR_SPARCLITE86X,
619 PROCESSOR_ULTRASPARC,
620 PROCESSOR_ULTRASPARC3
623 /* This is set from -m{cpu,tune}=xxx. */
624 extern enum processor_type sparc_cpu;
626 /* Recast the cpu class to be the cpu attribute.
627 Every file includes us, but not every file includes insn-attr.h. */
628 #define sparc_cpu_attr ((enum attr_cpu) sparc_cpu)
630 #define TARGET_OPTIONS \
632 { "cpu=", &sparc_select[1].string, \
633 N_("Use features of and schedule code for given CPU") }, \
634 { "tune=", &sparc_select[2].string, \
635 N_("Schedule code for given CPU") }, \
636 { "cmodel=", &sparc_cmodel_string, \
637 N_("Use given Sparc code model") }, \
641 /* This is meant to be redefined in target specific files. */
642 #define SUBTARGET_OPTIONS
644 /* sparc_select[0] is reserved for the default cpu. */
645 struct sparc_cpu_select
648 const char *const name;
649 const int set_tune_p;
650 const int set_arch_p;
653 extern struct sparc_cpu_select sparc_select[];
655 /* target machine storage layout */
657 /* Define this if most significant bit is lowest numbered
658 in instructions that operate on numbered bit-fields. */
659 #define BITS_BIG_ENDIAN 1
661 /* Define this if most significant byte of a word is the lowest numbered. */
662 #define BYTES_BIG_ENDIAN 1
664 /* Define this if most significant word of a multiword number is the lowest
666 #define WORDS_BIG_ENDIAN 1
668 /* Define this to set the endianness to use in libgcc2.c, which can
669 not depend on target_flags. */
670 #if defined (__LITTLE_ENDIAN__) || defined(__LITTLE_ENDIAN_DATA__)
671 #define LIBGCC2_WORDS_BIG_ENDIAN 0
673 #define LIBGCC2_WORDS_BIG_ENDIAN 1
676 #define MAX_BITS_PER_WORD 64
678 /* Width of a word, in units (bytes). */
679 #define UNITS_PER_WORD (TARGET_ARCH64 ? 8 : 4)
681 #define MIN_UNITS_PER_WORD UNITS_PER_WORD
683 #define MIN_UNITS_PER_WORD 4
686 /* Now define the sizes of the C data types. */
688 #define SHORT_TYPE_SIZE 16
689 #define INT_TYPE_SIZE 32
690 #define LONG_TYPE_SIZE (TARGET_ARCH64 ? 64 : 32)
691 #define LONG_LONG_TYPE_SIZE 64
692 #define FLOAT_TYPE_SIZE 32
693 #define DOUBLE_TYPE_SIZE 64
696 #define MAX_LONG_TYPE_SIZE 64
700 /* ??? This does not work in SunOS 4.x, so it is not enabled here.
701 Instead, it is enabled in sol2.h, because it does work under Solaris. */
702 /* Define for support of TFmode long double.
703 Sparc ABI says that long double is 4 words. */
704 #define LONG_DOUBLE_TYPE_SIZE 128
707 /* Width in bits of a pointer.
708 See also the macro `Pmode' defined below. */
709 #define POINTER_SIZE (TARGET_PTR64 ? 64 : 32)
711 /* If we have to extend pointers (only when TARGET_ARCH64 and not
712 TARGET_PTR64), we want to do it unsigned. This macro does nothing
713 if ptr_mode and Pmode are the same. */
714 #define POINTERS_EXTEND_UNSIGNED 1
716 /* A macro to update MODE and UNSIGNEDP when an object whose type
717 is TYPE and which has the specified mode and signedness is to be
718 stored in a register. This macro is only called when TYPE is a
720 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
722 && GET_MODE_CLASS (MODE) == MODE_INT \
723 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
726 /* Define this macro if the promotion described by PROMOTE_MODE
727 should also be done for outgoing function arguments. */
728 /* This is only needed for TARGET_ARCH64, but since PROMOTE_MODE is a no-op
729 for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test
731 #define PROMOTE_FUNCTION_ARGS
733 /* Define this macro if the promotion described by PROMOTE_MODE
734 should also be done for the return value of functions.
735 If this macro is defined, FUNCTION_VALUE must perform the same
736 promotions done by PROMOTE_MODE. */
737 /* This is only needed for TARGET_ARCH64, but since PROMOTE_MODE is a no-op
738 for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test
740 #define PROMOTE_FUNCTION_RETURN
742 /* Define this macro if the promotion described by PROMOTE_MODE
743 should _only_ be performed for outgoing function arguments or
744 function return values, as specified by PROMOTE_FUNCTION_ARGS
745 and PROMOTE_FUNCTION_RETURN, respectively. */
746 /* This is only needed for TARGET_ARCH64, but since PROMOTE_MODE is a no-op
747 for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test
748 for this value. For TARGET_ARCH64 we need it, as we don't have instructions
749 for arithmetic operations which do zero/sign extension at the same time,
750 so without this we end up with a srl/sra after every assignment to an
751 user variable, which means very very bad code. */
752 #define PROMOTE_FOR_CALL_ONLY
754 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
755 #define PARM_BOUNDARY (TARGET_ARCH64 ? 64 : 32)
757 /* Boundary (in *bits*) on which stack pointer should be aligned. */
758 #define STACK_BOUNDARY (TARGET_ARCH64 ? 128 : 64)
760 /* ALIGN FRAMES on double word boundaries */
762 #define SPARC_STACK_ALIGN(LOC) \
763 (TARGET_ARCH64 ? (((LOC)+15) & ~15) : (((LOC)+7) & ~7))
765 /* Allocation boundary (in *bits*) for the code of a function. */
766 #define FUNCTION_BOUNDARY 32
768 /* Alignment of field after `int : 0' in a structure. */
769 #define EMPTY_FIELD_BOUNDARY (TARGET_ARCH64 ? 64 : 32)
771 /* Every structure's size must be a multiple of this. */
772 #define STRUCTURE_SIZE_BOUNDARY 8
774 /* A bitfield declared as `int' forces `int' alignment for the struct. */
775 #define PCC_BITFIELD_TYPE_MATTERS 1
777 /* No data type wants to be aligned rounder than this. */
778 #define BIGGEST_ALIGNMENT (TARGET_ARCH64 ? 128 : 64)
780 /* The best alignment to use in cases where we have a choice. */
781 #define FASTEST_ALIGNMENT 64
783 /* Define this macro as an expression for the alignment of a structure
784 (given by STRUCT as a tree node) if the alignment computed in the
785 usual way is COMPUTED and the alignment explicitly specified was
788 The default is to use SPECIFIED if it is larger; otherwise, use
789 the smaller of COMPUTED and `BIGGEST_ALIGNMENT' */
790 #define ROUND_TYPE_ALIGN(STRUCT, COMPUTED, SPECIFIED) \
791 (TARGET_FASTER_STRUCTS ? \
792 ((TREE_CODE (STRUCT) == RECORD_TYPE \
793 || TREE_CODE (STRUCT) == UNION_TYPE \
794 || TREE_CODE (STRUCT) == QUAL_UNION_TYPE) \
795 && TYPE_FIELDS (STRUCT) != 0 \
796 ? MAX (MAX ((COMPUTED), (SPECIFIED)), BIGGEST_ALIGNMENT) \
797 : MAX ((COMPUTED), (SPECIFIED))) \
798 : MAX ((COMPUTED), (SPECIFIED)))
800 /* Make strings word-aligned so strcpy from constants will be faster. */
801 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
802 ((TREE_CODE (EXP) == STRING_CST \
803 && (ALIGN) < FASTEST_ALIGNMENT) \
804 ? FASTEST_ALIGNMENT : (ALIGN))
806 /* Make arrays of chars word-aligned for the same reasons. */
807 #define DATA_ALIGNMENT(TYPE, ALIGN) \
808 (TREE_CODE (TYPE) == ARRAY_TYPE \
809 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
810 && (ALIGN) < FASTEST_ALIGNMENT ? FASTEST_ALIGNMENT : (ALIGN))
812 /* Set this nonzero if move instructions will actually fail to work
813 when given unaligned data. */
814 #define STRICT_ALIGNMENT 1
816 /* Things that must be doubleword aligned cannot go in the text section,
817 because the linker fails to align the text section enough!
818 Put them in the data section. This macro is only used in this file. */
819 #define MAX_TEXT_ALIGN 32
821 /* This forces all variables and constants to the data section when PIC.
822 This is because the SunOS 4 shared library scheme thinks everything in
823 text is a function, and patches the address to point to a loader stub. */
824 /* This is defined to zero for every system which doesn't use the a.out object
826 #ifndef SUNOS4_SHARED_LIBRARIES
827 #define SUNOS4_SHARED_LIBRARIES 0
830 /* Standard register usage. */
832 /* Number of actual hardware registers.
833 The hardware registers are assigned numbers for the compiler
834 from 0 to just below FIRST_PSEUDO_REGISTER.
835 All registers that the compiler knows about must be given numbers,
836 even those that are not normally considered general registers.
838 SPARC has 32 integer registers and 32 floating point registers.
839 64 bit SPARC has 32 additional fp regs, but the odd numbered ones are not
840 accessible. We still account for them to simplify register computations
841 (eg: in CLASS_MAX_NREGS). There are also 4 fp condition code registers, so
843 Register 100 is used as the integer condition code register.
844 Register 101 is used as the soft frame pointer register. */
846 #define FIRST_PSEUDO_REGISTER 102
848 #define SPARC_FIRST_FP_REG 32
849 /* Additional V9 fp regs. */
850 #define SPARC_FIRST_V9_FP_REG 64
851 #define SPARC_LAST_V9_FP_REG 95
852 /* V9 %fcc[0123]. V8 uses (figuratively) %fcc0. */
853 #define SPARC_FIRST_V9_FCC_REG 96
854 #define SPARC_LAST_V9_FCC_REG 99
856 #define SPARC_FCC_REG 96
857 /* Integer CC reg. We don't distinguish %icc from %xcc. */
858 #define SPARC_ICC_REG 100
860 /* Nonzero if REGNO is an fp reg. */
861 #define SPARC_FP_REG_P(REGNO) \
862 ((REGNO) >= SPARC_FIRST_FP_REG && (REGNO) <= SPARC_LAST_V9_FP_REG)
864 /* Argument passing regs. */
865 #define SPARC_OUTGOING_INT_ARG_FIRST 8
866 #define SPARC_INCOMING_INT_ARG_FIRST (TARGET_FLAT ? 8 : 24)
867 #define SPARC_FP_ARG_FIRST 32
869 /* 1 for registers that have pervasive standard uses
870 and are not available for the register allocator.
873 g1 is free to use as temporary.
874 g2-g4 are reserved for applications. Gcc normally uses them as
875 temporaries, but this can be disabled via the -mno-app-regs option.
876 g5 through g7 are reserved for the operating system.
879 g1,g5 are free to use as temporaries, and are free to use between calls
880 if the call is to an external function via the PLT.
881 g4 is free to use as a temporary in the non-embedded case.
882 g4 is reserved in the embedded case.
883 g2-g3 are reserved for applications. Gcc normally uses them as
884 temporaries, but this can be disabled via the -mno-app-regs option.
885 g6-g7 are reserved for the operating system (or application in
887 ??? Register 1 is used as a temporary by the 64 bit sethi pattern, so must
888 currently be a fixed register until this pattern is rewritten.
889 Register 1 is also used when restoring call-preserved registers in large
892 Registers fixed in arch32 and not arch64 (or vice-versa) are marked in
893 CONDITIONAL_REGISTER_USAGE in order to properly handle -ffixed-.
896 #define FIXED_REGISTERS \
897 {1, 0, 2, 2, 2, 2, 1, 1, \
898 0, 0, 0, 0, 0, 0, 1, 0, \
899 0, 0, 0, 0, 0, 0, 0, 0, \
900 0, 0, 0, 0, 0, 0, 1, 1, \
902 0, 0, 0, 0, 0, 0, 0, 0, \
903 0, 0, 0, 0, 0, 0, 0, 0, \
904 0, 0, 0, 0, 0, 0, 0, 0, \
905 0, 0, 0, 0, 0, 0, 0, 0, \
907 0, 0, 0, 0, 0, 0, 0, 0, \
908 0, 0, 0, 0, 0, 0, 0, 0, \
909 0, 0, 0, 0, 0, 0, 0, 0, \
910 0, 0, 0, 0, 0, 0, 0, 0, \
914 /* 1 for registers not available across function calls.
915 These must include the FIXED_REGISTERS and also any
916 registers that can be used without being saved.
917 The latter must include the registers where values are returned
918 and the register where structure-value addresses are passed.
919 Aside from that, you can include as many other registers as you like. */
921 #define CALL_USED_REGISTERS \
922 {1, 1, 1, 1, 1, 1, 1, 1, \
923 1, 1, 1, 1, 1, 1, 1, 1, \
924 0, 0, 0, 0, 0, 0, 0, 0, \
925 0, 0, 0, 0, 0, 0, 1, 1, \
927 1, 1, 1, 1, 1, 1, 1, 1, \
928 1, 1, 1, 1, 1, 1, 1, 1, \
929 1, 1, 1, 1, 1, 1, 1, 1, \
930 1, 1, 1, 1, 1, 1, 1, 1, \
932 1, 1, 1, 1, 1, 1, 1, 1, \
933 1, 1, 1, 1, 1, 1, 1, 1, \
934 1, 1, 1, 1, 1, 1, 1, 1, \
935 1, 1, 1, 1, 1, 1, 1, 1, \
939 /* If !TARGET_FPU, then make the fp registers and fp cc regs fixed so that
940 they won't be allocated. */
942 #define CONDITIONAL_REGISTER_USAGE \
945 if (PIC_OFFSET_TABLE_REGNUM != INVALID_REGNUM) \
947 fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
948 call_used_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
950 /* If the user has passed -f{fixed,call-{used,saved}}-g5 */ \
951 /* then honour it. */ \
952 if (TARGET_ARCH32 && fixed_regs[5]) \
954 else if (TARGET_ARCH64 && fixed_regs[5] == 2) \
959 for (regno = SPARC_FIRST_V9_FP_REG; \
960 regno <= SPARC_LAST_V9_FP_REG; \
962 fixed_regs[regno] = 1; \
963 /* %fcc0 is used by v8 and v9. */ \
964 for (regno = SPARC_FIRST_V9_FCC_REG + 1; \
965 regno <= SPARC_LAST_V9_FCC_REG; \
967 fixed_regs[regno] = 1; \
972 for (regno = 32; regno < SPARC_LAST_V9_FCC_REG; regno++) \
973 fixed_regs[regno] = 1; \
975 /* If the user has passed -f{fixed,call-{used,saved}}-g2 */ \
976 /* then honour it. Likewise with g3 and g4. */ \
977 if (fixed_regs[2] == 2) \
978 fixed_regs[2] = ! TARGET_APP_REGS; \
979 if (fixed_regs[3] == 2) \
980 fixed_regs[3] = ! TARGET_APP_REGS; \
981 if (TARGET_ARCH32 && fixed_regs[4] == 2) \
982 fixed_regs[4] = ! TARGET_APP_REGS; \
983 else if (TARGET_CM_EMBMEDANY) \
985 else if (fixed_regs[4] == 2) \
990 /* Let the compiler believe the frame pointer is still \
991 %fp, but output it as %i7. */ \
992 fixed_regs[31] = 1; \
993 reg_names[HARD_FRAME_POINTER_REGNUM] = "%i7"; \
994 /* Disable leaf functions */ \
995 memset (sparc_leaf_regs, 0, FIRST_PSEUDO_REGISTER); \
996 /* Make LEAF_REG_REMAP a noop. */ \
997 for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) \
998 leaf_reg_remap [regno] = regno; \
1003 /* Return number of consecutive hard regs needed starting at reg REGNO
1004 to hold something of mode MODE.
1005 This is ordinarily the length in words of a value of mode MODE
1006 but can be less for certain modes in special long registers.
1008 On SPARC, ordinary registers hold 32 bits worth;
1009 this means both integer and floating point registers.
1010 On v9, integer regs hold 64 bits worth; floating point regs hold
1011 32 bits worth (this includes the new fp regs as even the odd ones are
1012 included in the hard register count). */
1014 #define HARD_REGNO_NREGS(REGNO, MODE) \
1016 ? ((REGNO) < 32 || (REGNO) == FRAME_POINTER_REGNUM \
1017 ? (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD \
1018 : (GET_MODE_SIZE (MODE) + 3) / 4) \
1019 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
1021 /* Due to the ARCH64 descrepancy above we must override this next
1023 #define REGMODE_NATURAL_SIZE(MODE) \
1024 ((TARGET_ARCH64 && FLOAT_MODE_P (MODE)) ? 4 : UNITS_PER_WORD)
1026 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
1027 See sparc.c for how we initialize this. */
1028 extern const int *hard_regno_mode_classes;
1029 extern int sparc_mode_class[];
1031 /* ??? Because of the funny way we pass parameters we should allow certain
1032 ??? types of float/complex values to be in integer registers during
1033 ??? RTL generation. This only matters on arch32. */
1034 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
1035 ((hard_regno_mode_classes[REGNO] & sparc_mode_class[MODE]) != 0)
1037 /* Value is 1 if it is a good idea to tie two pseudo registers
1038 when one has mode MODE1 and one has mode MODE2.
1039 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
1040 for any hard reg, then this must be 0 for correct output.
1042 For V9: SFmode can't be combined with other float modes, because they can't
1043 be allocated to the %d registers. Also, DFmode won't fit in odd %f
1044 registers, but SFmode will. */
1045 #define MODES_TIEABLE_P(MODE1, MODE2) \
1046 ((MODE1) == (MODE2) \
1047 || (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2) \
1049 || (GET_MODE_CLASS (MODE1) != MODE_FLOAT \
1050 || (MODE1 != SFmode && MODE2 != SFmode)))))
1052 /* Specify the registers used for certain standard purposes.
1053 The values of these macros are register numbers. */
1055 /* SPARC pc isn't overloaded on a register that the compiler knows about. */
1056 /* #define PC_REGNUM */
1058 /* Register to use for pushing function arguments. */
1059 #define STACK_POINTER_REGNUM 14
1061 /* The stack bias (amount by which the hardware register is offset by). */
1062 #define SPARC_STACK_BIAS ((TARGET_ARCH64 && TARGET_STACK_BIAS) ? 2047 : 0)
1064 /* Actual top-of-stack address is 92/176 greater than the contents of the
1065 stack pointer register for !v9/v9. That is:
1066 - !v9: 64 bytes for the in and local registers, 4 bytes for structure return
1067 address, and 6*4 bytes for the 6 register parameters.
1068 - v9: 128 bytes for the in and local registers + 6*8 bytes for the integer
1070 #define STACK_POINTER_OFFSET (FIRST_PARM_OFFSET(0) + SPARC_STACK_BIAS)
1072 /* Base register for access to local variables of the function. */
1073 #define HARD_FRAME_POINTER_REGNUM 30
1075 /* The soft frame pointer does not have the stack bias applied. */
1076 #define FRAME_POINTER_REGNUM 101
1078 /* Given the stack bias, the stack pointer isn't actually aligned. */
1079 #define INIT_EXPANDERS \
1081 if (cfun && cfun->emit->regno_pointer_align && SPARC_STACK_BIAS) \
1083 REGNO_POINTER_ALIGN (STACK_POINTER_REGNUM) = BITS_PER_UNIT; \
1084 REGNO_POINTER_ALIGN (HARD_FRAME_POINTER_REGNUM) = BITS_PER_UNIT; \
1088 /* Value should be nonzero if functions must have frame pointers.
1089 Zero means the frame pointer need not be set up (and parms
1090 may be accessed via the stack pointer) in functions that seem suitable.
1091 This is computed in `reload', in reload1.c.
1092 Used in flow.c, global.c, and reload1.c.
1094 Being a non-leaf function does not mean a frame pointer is needed in the
1095 flat window model. However, the debugger won't be able to backtrace through
1097 #define FRAME_POINTER_REQUIRED \
1099 ? (current_function_calls_alloca \
1100 || current_function_varargs \
1101 || !leaf_function_p ()) \
1102 : ! (leaf_function_p () && only_leaf_regs_used ()))
1104 /* Base register for access to arguments of the function. */
1105 #define ARG_POINTER_REGNUM FRAME_POINTER_REGNUM
1107 /* Register in which static-chain is passed to a function. This must
1108 not be a register used by the prologue. */
1109 #define STATIC_CHAIN_REGNUM (TARGET_ARCH64 ? 5 : 2)
1111 /* Register which holds offset table for position-independent
1114 #define PIC_OFFSET_TABLE_REGNUM (flag_pic ? 23 : INVALID_REGNUM)
1116 /* Pick a default value we can notice from override_options:
1118 v9: Default is off. */
1120 #define DEFAULT_PCC_STRUCT_RETURN -1
1122 /* Sparc ABI says that quad-precision floats and all structures are returned
1124 For v9: unions <= 32 bytes in size are returned in int regs,
1125 structures up to 32 bytes are returned in int and fp regs. */
1127 #define RETURN_IN_MEMORY(TYPE) \
1129 ? (TYPE_MODE (TYPE) == BLKmode \
1130 || TYPE_MODE (TYPE) == TFmode \
1131 || TYPE_MODE (TYPE) == TCmode) \
1132 : (TYPE_MODE (TYPE) == BLKmode \
1133 && (unsigned HOST_WIDE_INT) int_size_in_bytes (TYPE) > 32))
1135 /* Functions which return large structures get the address
1136 to place the wanted value at offset 64 from the frame.
1137 Must reserve 64 bytes for the in and local registers.
1138 v9: Functions which return large structures get the address to place the
1139 wanted value from an invisible first argument. */
1140 /* Used only in other #defines in this file. */
1141 #define STRUCT_VALUE_OFFSET 64
1143 #define STRUCT_VALUE \
1146 : gen_rtx_MEM (Pmode, plus_constant (stack_pointer_rtx, \
1147 STRUCT_VALUE_OFFSET)))
1149 #define STRUCT_VALUE_INCOMING \
1152 : gen_rtx_MEM (Pmode, plus_constant (frame_pointer_rtx, \
1153 STRUCT_VALUE_OFFSET)))
1155 /* Define the classes of registers for register constraints in the
1156 machine description. Also define ranges of constants.
1158 One of the classes must always be named ALL_REGS and include all hard regs.
1159 If there is more than one class, another class must be named NO_REGS
1160 and contain no registers.
1162 The name GENERAL_REGS must be the name of a class (or an alias for
1163 another name such as ALL_REGS). This is the class of registers
1164 that is allowed by "g" or "r" in a register constraint.
1165 Also, registers outside this class are allocated only when
1166 instructions express preferences for them.
1168 The classes must be numbered in nondecreasing order; that is,
1169 a larger-numbered class must never be contained completely
1170 in a smaller-numbered class.
1172 For any two classes, it is very desirable that there be another
1173 class that represents their union. */
1175 /* The SPARC has various kinds of registers: general, floating point,
1176 and condition codes [well, it has others as well, but none that we
1177 care directly about].
1179 For v9 we must distinguish between the upper and lower floating point
1180 registers because the upper ones can't hold SFmode values.
1181 HARD_REGNO_MODE_OK won't help here because reload assumes that register(s)
1182 satisfying a group need for a class will also satisfy a single need for
1183 that class. EXTRA_FP_REGS is a bit of a misnomer as it covers all 64 fp
1186 It is important that one class contains all the general and all the standard
1187 fp regs. Otherwise find_reg() won't properly allocate int regs for moves,
1188 because reg_class_record() will bias the selection in favor of fp regs,
1189 because reg_class_subunion[GENERAL_REGS][FP_REGS] will yield FP_REGS,
1190 because FP_REGS > GENERAL_REGS.
1192 It is also important that one class contain all the general and all the
1193 fp regs. Otherwise when spilling a DFmode reg, it may be from EXTRA_FP_REGS
1194 but find_reloads() may use class GENERAL_OR_FP_REGS. This will cause
1195 allocate_reload_reg() to bypass it causing an abort because the compiler
1196 thinks it doesn't have a spill reg when in fact it does.
1198 v9 also has 4 floating point condition code registers. Since we don't
1199 have a class that is the union of FPCC_REGS with either of the others,
1200 it is important that it appear first. Otherwise the compiler will die
1201 trying to compile _fixunsdfsi because fix_truncdfsi2 won't match its
1204 It is important that SPARC_ICC_REG have class NO_REGS. Otherwise combine
1205 may try to use it to hold an SImode value. See register_operand.
1206 ??? Should %fcc[0123] be handled similarly?
1209 enum reg_class { NO_REGS, FPCC_REGS, I64_REGS, GENERAL_REGS, FP_REGS,
1210 EXTRA_FP_REGS, GENERAL_OR_FP_REGS, GENERAL_OR_EXTRA_FP_REGS,
1211 ALL_REGS, LIM_REG_CLASSES };
1213 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1215 /* Give names of register classes as strings for dump file. */
1217 #define REG_CLASS_NAMES \
1218 { "NO_REGS", "FPCC_REGS", "I64_REGS", "GENERAL_REGS", "FP_REGS", \
1219 "EXTRA_FP_REGS", "GENERAL_OR_FP_REGS", "GENERAL_OR_EXTRA_FP_REGS", \
1222 /* Define which registers fit in which classes.
1223 This is an initializer for a vector of HARD_REG_SET
1224 of length N_REG_CLASSES. */
1226 #define REG_CLASS_CONTENTS \
1227 {{0, 0, 0, 0}, /* NO_REGS */ \
1228 {0, 0, 0, 0xf}, /* FPCC_REGS */ \
1229 {0xffff, 0, 0, 0}, /* I64_REGS */ \
1230 {-1, 0, 0, 0x20}, /* GENERAL_REGS */ \
1231 {0, -1, 0, 0}, /* FP_REGS */ \
1232 {0, -1, -1, 0}, /* EXTRA_FP_REGS */ \
1233 {-1, -1, 0, 0x20}, /* GENERAL_OR_FP_REGS */ \
1234 {-1, -1, -1, 0x20}, /* GENERAL_OR_EXTRA_FP_REGS */ \
1235 {-1, -1, -1, 0x3f}} /* ALL_REGS */
1237 /* The same information, inverted:
1238 Return the class number of the smallest class containing
1239 reg number REGNO. This could be a conditional expression
1240 or could index an array. */
1242 extern enum reg_class sparc_regno_reg_class[FIRST_PSEUDO_REGISTER];
1244 #define REGNO_REG_CLASS(REGNO) sparc_regno_reg_class[(REGNO)]
1246 /* This is the order in which to allocate registers normally.
1248 We put %f0-%f7 last among the float registers, so as to make it more
1249 likely that a pseudo-register which dies in the float return register
1250 area will get allocated to the float return register, thus saving a move
1251 instruction at the end of the function.
1253 Similarly for integer return value registers.
1255 We know in this case that we will not end up with a leaf function.
1257 The register allocater is given the global and out registers first
1258 because these registers are call clobbered and thus less useful to
1259 global register allocation.
1261 Next we list the local and in registers. They are not call clobbered
1262 and thus very useful for global register allocation. We list the input
1263 registers before the locals so that it is more likely the incoming
1264 arguments received in those registers can just stay there and not be
1267 #define REG_ALLOC_ORDER \
1268 { 1, 2, 3, 4, 5, 6, 7, /* %g1-%g7 */ \
1269 13, 12, 11, 10, 9, 8, /* %o5-%o0 */ \
1271 16, 17, 18, 19, 20, 21, 22, 23, /* %l0-%l7 */ \
1272 29, 28, 27, 26, 25, 24, 31, /* %i5-%i0,%i7 */\
1273 40, 41, 42, 43, 44, 45, 46, 47, /* %f8-%f15 */ \
1274 48, 49, 50, 51, 52, 53, 54, 55, /* %f16-%f23 */ \
1275 56, 57, 58, 59, 60, 61, 62, 63, /* %f24-%f31 */ \
1276 64, 65, 66, 67, 68, 69, 70, 71, /* %f32-%f39 */ \
1277 72, 73, 74, 75, 76, 77, 78, 79, /* %f40-%f47 */ \
1278 80, 81, 82, 83, 84, 85, 86, 87, /* %f48-%f55 */ \
1279 88, 89, 90, 91, 92, 93, 94, 95, /* %f56-%f63 */ \
1280 39, 38, 37, 36, 35, 34, 33, 32, /* %f7-%f0 */ \
1281 96, 97, 98, 99, /* %fcc0-3 */ \
1282 100, 0, 14, 30, 101} /* %icc, %g0, %o6, %i6, %sfp */
1284 /* This is the order in which to allocate registers for
1285 leaf functions. If all registers can fit in the global and
1286 output registers, then we have the possibility of having a leaf
1289 The macro actually mentioned the input registers first,
1290 because they get renumbered into the output registers once
1291 we know really do have a leaf function.
1293 To be more precise, this register allocation order is used
1294 when %o7 is found to not be clobbered right before register
1295 allocation. Normally, the reason %o7 would be clobbered is
1296 due to a call which could not be transformed into a sibling
1299 As a consequence, it is possible to use the leaf register
1300 allocation order and not end up with a leaf function. We will
1301 not get suboptimal register allocation in that case because by
1302 definition of being potentially leaf, there were no function
1303 calls. Therefore, allocation order within the local register
1304 window is not critical like it is when we do have function calls. */
1306 #define REG_LEAF_ALLOC_ORDER \
1307 { 1, 2, 3, 4, 5, 6, 7, /* %g1-%g7 */ \
1308 29, 28, 27, 26, 25, 24, /* %i5-%i0 */ \
1310 13, 12, 11, 10, 9, 8, /* %o5-%o0 */ \
1311 16, 17, 18, 19, 20, 21, 22, 23, /* %l0-%l7 */ \
1312 40, 41, 42, 43, 44, 45, 46, 47, /* %f8-%f15 */ \
1313 48, 49, 50, 51, 52, 53, 54, 55, /* %f16-%f23 */ \
1314 56, 57, 58, 59, 60, 61, 62, 63, /* %f24-%f31 */ \
1315 64, 65, 66, 67, 68, 69, 70, 71, /* %f32-%f39 */ \
1316 72, 73, 74, 75, 76, 77, 78, 79, /* %f40-%f47 */ \
1317 80, 81, 82, 83, 84, 85, 86, 87, /* %f48-%f55 */ \
1318 88, 89, 90, 91, 92, 93, 94, 95, /* %f56-%f63 */ \
1319 39, 38, 37, 36, 35, 34, 33, 32, /* %f7-%f0 */ \
1320 96, 97, 98, 99, /* %fcc0-3 */ \
1321 100, 0, 14, 30, 31, 101} /* %icc, %g0, %o6, %i6, %i7, %sfp */
1323 #define ORDER_REGS_FOR_LOCAL_ALLOC order_regs_for_local_alloc ()
1325 extern char sparc_leaf_regs[];
1326 #define LEAF_REGISTERS sparc_leaf_regs
1328 extern char leaf_reg_remap[];
1329 #define LEAF_REG_REMAP(REGNO) (leaf_reg_remap[REGNO])
1331 /* The class value for index registers, and the one for base regs. */
1332 #define INDEX_REG_CLASS GENERAL_REGS
1333 #define BASE_REG_CLASS GENERAL_REGS
1335 /* Local macro to handle the two v9 classes of FP regs. */
1336 #define FP_REG_CLASS_P(CLASS) ((CLASS) == FP_REGS || (CLASS) == EXTRA_FP_REGS)
1338 /* Get reg_class from a letter such as appears in the machine description.
1339 In the not-v9 case, coerce v9's 'e' class to 'f', so we can use 'e' in the
1340 .md file for v8 and v9.
1341 'd' and 'b' are used for single and double precision VIS operations,
1343 'h' is used for V8+ 64 bit global and out registers. */
1345 #define REG_CLASS_FROM_LETTER(C) \
1347 ? ((C) == 'f' ? FP_REGS \
1348 : (C) == 'e' ? EXTRA_FP_REGS \
1349 : (C) == 'c' ? FPCC_REGS \
1350 : ((C) == 'd' && TARGET_VIS) ? FP_REGS\
1351 : ((C) == 'b' && TARGET_VIS) ? EXTRA_FP_REGS\
1352 : ((C) == 'h' && TARGET_V8PLUS) ? I64_REGS\
1354 : ((C) == 'f' ? FP_REGS \
1355 : (C) == 'e' ? FP_REGS \
1356 : (C) == 'c' ? FPCC_REGS \
1359 /* The letters I, J, K, L and M in a register constraint string
1360 can be used to stand for particular ranges of immediate operands.
1361 This macro defines what the ranges are.
1362 C is the letter, and VALUE is a constant value.
1363 Return 1 if VALUE is in the range specified by C.
1365 `I' is used for the range of constants an insn can actually contain.
1366 `J' is used for the range which is just zero (since that is R0).
1367 `K' is used for constants which can be loaded with a single sethi insn.
1368 `L' is used for the range of constants supported by the movcc insns.
1369 `M' is used for the range of constants supported by the movrcc insns.
1370 `N' is like K, but for constants wider than 32 bits. */
1372 #define SPARC_SIMM10_P(X) ((unsigned HOST_WIDE_INT) (X) + 0x200 < 0x400)
1373 #define SPARC_SIMM11_P(X) ((unsigned HOST_WIDE_INT) (X) + 0x400 < 0x800)
1374 #define SPARC_SIMM13_P(X) ((unsigned HOST_WIDE_INT) (X) + 0x1000 < 0x2000)
1375 /* 10 and 11 bit immediates are only used for a few specific insns.
1376 SMALL_INT is used throughout the port so we continue to use it. */
1377 #define SMALL_INT(X) (SPARC_SIMM13_P (INTVAL (X)))
1378 /* 13 bit immediate, considering only the low 32 bits */
1379 #define SMALL_INT32(X) (SPARC_SIMM13_P (trunc_int_for_mode \
1380 (INTVAL (X), SImode)))
1381 #define SPARC_SETHI_P(X) \
1382 (((unsigned HOST_WIDE_INT) (X) \
1383 & ((unsigned HOST_WIDE_INT) 0x3ff - GET_MODE_MASK (SImode) - 1)) == 0)
1384 #define SPARC_SETHI32_P(X) \
1385 (SPARC_SETHI_P ((unsigned HOST_WIDE_INT) (X) & GET_MODE_MASK (SImode)))
1387 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
1388 ((C) == 'I' ? SPARC_SIMM13_P (VALUE) \
1389 : (C) == 'J' ? (VALUE) == 0 \
1390 : (C) == 'K' ? SPARC_SETHI32_P (VALUE) \
1391 : (C) == 'L' ? SPARC_SIMM11_P (VALUE) \
1392 : (C) == 'M' ? SPARC_SIMM10_P (VALUE) \
1393 : (C) == 'N' ? SPARC_SETHI_P (VALUE) \
1396 /* Similar, but for floating constants, and defining letters G and H.
1397 Here VALUE is the CONST_DOUBLE rtx itself. */
1399 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
1400 ((C) == 'G' ? fp_zero_operand (VALUE, GET_MODE (VALUE)) \
1401 : (C) == 'H' ? arith_double_operand (VALUE, DImode) \
1404 /* Given an rtx X being reloaded into a reg required to be
1405 in class CLASS, return the class of reg to actually use.
1406 In general this is just CLASS; but on some machines
1407 in some cases it is preferable to use a more restrictive class. */
1408 /* - We can't load constants into FP registers.
1409 - We can't load FP constants into integer registers when soft-float,
1410 because there is no soft-float pattern with a r/F constraint.
1411 - We can't load FP constants into integer registers for TFmode unless
1412 it is 0.0L, because there is no movtf pattern with a r/F constraint.
1413 - Try and reload integer constants (symbolic or otherwise) back into
1414 registers directly, rather than having them dumped to memory. */
1416 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
1418 ? ((FP_REG_CLASS_P (CLASS) \
1419 || (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \
1421 || (GET_MODE (X) == TFmode \
1422 && ! fp_zero_operand (X, TFmode))) \
1424 : (!FP_REG_CLASS_P (CLASS) \
1425 && GET_MODE_CLASS (GET_MODE (X)) == MODE_INT) \
1430 /* Return the register class of a scratch register needed to load IN into
1431 a register of class CLASS in MODE.
1433 We need a temporary when loading/storing a HImode/QImode value
1434 between memory and the FPU registers. This can happen when combine puts
1435 a paradoxical subreg in a float/fix conversion insn.
1437 We need a temporary when loading/storing a DFmode value between
1438 unaligned memory and the upper FPU registers. */
1440 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, IN) \
1441 ((FP_REG_CLASS_P (CLASS) \
1442 && ((MODE) == HImode || (MODE) == QImode) \
1443 && (GET_CODE (IN) == MEM \
1444 || ((GET_CODE (IN) == REG || GET_CODE (IN) == SUBREG) \
1445 && true_regnum (IN) == -1))) \
1447 : ((CLASS) == EXTRA_FP_REGS && (MODE) == DFmode \
1448 && GET_CODE (IN) == MEM && TARGET_ARCH32 \
1449 && ! mem_min_alignment ((IN), 8)) \
1451 : (((TARGET_CM_MEDANY \
1452 && symbolic_operand ((IN), (MODE))) \
1453 || (TARGET_CM_EMBMEDANY \
1454 && text_segment_operand ((IN), (MODE)))) \
1459 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, IN) \
1460 ((FP_REG_CLASS_P (CLASS) \
1461 && ((MODE) == HImode || (MODE) == QImode) \
1462 && (GET_CODE (IN) == MEM \
1463 || ((GET_CODE (IN) == REG || GET_CODE (IN) == SUBREG) \
1464 && true_regnum (IN) == -1))) \
1466 : ((CLASS) == EXTRA_FP_REGS && (MODE) == DFmode \
1467 && GET_CODE (IN) == MEM && TARGET_ARCH32 \
1468 && ! mem_min_alignment ((IN), 8)) \
1470 : (((TARGET_CM_MEDANY \
1471 && symbolic_operand ((IN), (MODE))) \
1472 || (TARGET_CM_EMBMEDANY \
1473 && text_segment_operand ((IN), (MODE)))) \
1478 /* On SPARC it is not possible to directly move data between
1479 GENERAL_REGS and FP_REGS. */
1480 #define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
1481 (FP_REG_CLASS_P (CLASS1) != FP_REG_CLASS_P (CLASS2))
1483 /* Return the stack location to use for secondary memory needed reloads.
1484 We want to use the reserved location just below the frame pointer.
1485 However, we must ensure that there is a frame, so use assign_stack_local
1486 if the frame size is zero. */
1487 #define SECONDARY_MEMORY_NEEDED_RTX(MODE) \
1488 (get_frame_size () == 0 \
1489 ? assign_stack_local (MODE, GET_MODE_SIZE (MODE), 0) \
1490 : gen_rtx_MEM (MODE, plus_constant (frame_pointer_rtx, \
1491 STARTING_FRAME_OFFSET)))
1493 /* Get_secondary_mem widens its argument to BITS_PER_WORD which loses on v9
1494 because the movsi and movsf patterns don't handle r/f moves.
1495 For v8 we copy the default definition. */
1496 #define SECONDARY_MEMORY_NEEDED_MODE(MODE) \
1498 ? (GET_MODE_BITSIZE (MODE) < 32 \
1499 ? mode_for_size (32, GET_MODE_CLASS (MODE), 0) \
1501 : (GET_MODE_BITSIZE (MODE) < BITS_PER_WORD \
1502 ? mode_for_size (BITS_PER_WORD, GET_MODE_CLASS (MODE), 0) \
1505 /* Return the maximum number of consecutive registers
1506 needed to represent mode MODE in a register of class CLASS. */
1507 /* On SPARC, this is the size of MODE in words. */
1508 #define CLASS_MAX_NREGS(CLASS, MODE) \
1509 (FP_REG_CLASS_P (CLASS) ? (GET_MODE_SIZE (MODE) + 3) / 4 \
1510 : (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
1512 /* Stack layout; function entry, exit and calling. */
1514 /* Define the number of register that can hold parameters.
1515 This macro is only used in other macro definitions below and in sparc.c.
1516 MODE is the mode of the argument.
1517 !v9: All args are passed in %o0-%o5.
1518 v9: %o0-%o5 and %f0-%f31 are cumulatively used to pass values.
1519 See the description in sparc.c. */
1520 #define NPARM_REGS(MODE) \
1522 ? (GET_MODE_CLASS (MODE) == MODE_FLOAT ? 32 : 6) \
1525 /* Define this if pushing a word on the stack
1526 makes the stack pointer a smaller address. */
1527 #define STACK_GROWS_DOWNWARD
1529 /* Define this if the nominal address of the stack frame
1530 is at the high-address end of the local variables;
1531 that is, each additional local variable allocated
1532 goes at a more negative offset in the frame. */
1533 #define FRAME_GROWS_DOWNWARD
1535 /* Offset within stack frame to start allocating local variables at.
1536 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
1537 first local allocated. Otherwise, it is the offset to the BEGINNING
1538 of the first local allocated. */
1539 /* This allows space for one TFmode floating point value. */
1540 #define STARTING_FRAME_OFFSET \
1541 (TARGET_ARCH64 ? -16 \
1542 : (-SPARC_STACK_ALIGN (LONG_DOUBLE_TYPE_SIZE / BITS_PER_UNIT)))
1544 /* If we generate an insn to push BYTES bytes,
1545 this says how many the stack pointer really advances by.
1546 On SPARC, don't define this because there are no push insns. */
1547 /* #define PUSH_ROUNDING(BYTES) */
1549 /* Offset of first parameter from the argument pointer register value.
1550 !v9: This is 64 for the ins and locals, plus 4 for the struct-return reg
1551 even if this function isn't going to use it.
1552 v9: This is 128 for the ins and locals. */
1553 #define FIRST_PARM_OFFSET(FNDECL) \
1554 (TARGET_ARCH64 ? 16 * UNITS_PER_WORD : STRUCT_VALUE_OFFSET + UNITS_PER_WORD)
1556 /* Offset from the argument pointer register value to the CFA.
1557 This is different from FIRST_PARM_OFFSET because the register window
1558 comes between the CFA and the arguments. */
1559 #define ARG_POINTER_CFA_OFFSET(FNDECL) 0
1561 /* When a parameter is passed in a register, stack space is still
1563 !v9: All 6 possible integer registers have backing store allocated.
1564 v9: Only space for the arguments passed is allocated. */
1565 /* ??? Ideally, we'd use zero here (as the minimum), but zero has special
1566 meaning to the backend. Further, we need to be able to detect if a
1567 varargs/unprototyped function is called, as they may want to spill more
1568 registers than we've provided space. Ugly, ugly. So for now we retain
1569 all 6 slots even for v9. */
1570 #define REG_PARM_STACK_SPACE(DECL) (6 * UNITS_PER_WORD)
1572 /* Definitions for register elimination. */
1573 /* ??? In TARGET_FLAT mode we needn't have a hard frame pointer. */
1575 #define ELIMINABLE_REGS \
1576 {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1577 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM} }
1579 /* The way this is structured, we can't eliminate SFP in favor of SP
1580 if the frame pointer is required: we want to use the SFP->HFP elimination
1581 in that case. But the test in update_eliminables doesn't know we are
1582 assuming below that we only do the former elimination. */
1583 #define CAN_ELIMINATE(FROM, TO) \
1584 ((TO) == HARD_FRAME_POINTER_REGNUM || !FRAME_POINTER_REQUIRED)
1586 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1589 if ((TO) == STACK_POINTER_REGNUM) \
1591 /* Note, we always pretend that this is a leaf function \
1592 because if it's not, there's no point in trying to \
1593 eliminate the frame pointer. If it is a leaf \
1594 function, we guessed right! */ \
1597 sparc_flat_compute_frame_size (get_frame_size ()); \
1599 (OFFSET) = compute_frame_size (get_frame_size (), 1); \
1601 (OFFSET) += SPARC_STACK_BIAS; \
1604 /* Keep the stack pointer constant throughout the function.
1605 This is both an optimization and a necessity: longjmp
1606 doesn't behave itself when the stack pointer moves within
1608 #define ACCUMULATE_OUTGOING_ARGS 1
1610 /* Value is the number of bytes of arguments automatically
1611 popped when returning from a subroutine call.
1612 FUNDECL is the declaration node of the function (as a tree),
1613 FUNTYPE is the data type of the function (as a tree),
1614 or for a library call it is an identifier node for the subroutine name.
1615 SIZE is the number of bytes of arguments passed on the stack. */
1617 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
1619 /* Some subroutine macros specific to this machine.
1620 When !TARGET_FPU, put float return values in the general registers,
1621 since we don't have any fp registers. */
1622 #define BASE_RETURN_VALUE_REG(MODE) \
1624 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 : 8) \
1625 : (((MODE) == SFmode || (MODE) == DFmode) && TARGET_FPU ? 32 : 8))
1627 #define BASE_OUTGOING_VALUE_REG(MODE) \
1629 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 \
1630 : TARGET_FLAT ? 8 : 24) \
1631 : (((MODE) == SFmode || (MODE) == DFmode) && TARGET_FPU ? 32 \
1632 : (TARGET_FLAT ? 8 : 24)))
1634 #define BASE_PASSING_ARG_REG(MODE) \
1636 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 : 8) \
1639 /* ??? FIXME -- seems wrong for v9 structure passing... */
1640 #define BASE_INCOMING_ARG_REG(MODE) \
1642 ? (TARGET_FPU && FLOAT_MODE_P (MODE) ? 32 \
1643 : TARGET_FLAT ? 8 : 24) \
1644 : (TARGET_FLAT ? 8 : 24))
1646 /* Define this macro if the target machine has "register windows". This
1647 C expression returns the register number as seen by the called function
1648 corresponding to register number OUT as seen by the calling function.
1649 Return OUT if register number OUT is not an outbound register. */
1651 #define INCOMING_REGNO(OUT) \
1652 ((TARGET_FLAT || (OUT) < 8 || (OUT) > 15) ? (OUT) : (OUT) + 16)
1654 /* Define this macro if the target machine has "register windows". This
1655 C expression returns the register number as seen by the calling function
1656 corresponding to register number IN as seen by the called function.
1657 Return IN if register number IN is not an inbound register. */
1659 #define OUTGOING_REGNO(IN) \
1660 ((TARGET_FLAT || (IN) < 24 || (IN) > 31) ? (IN) : (IN) - 16)
1662 /* Define this macro if the target machine has register windows. This
1663 C expression returns true if the register is call-saved but is in the
1666 #define LOCAL_REGNO(REGNO) \
1667 (TARGET_FLAT ? 0 : (REGNO) >= 16 && (REGNO) <= 31)
1669 /* Define how to find the value returned by a function.
1670 VALTYPE is the data type of the value (as a tree).
1671 If the precise function being called is known, FUNC is its FUNCTION_DECL;
1672 otherwise, FUNC is 0. */
1674 /* On SPARC the value is found in the first "output" register. */
1676 #define FUNCTION_VALUE(VALTYPE, FUNC) \
1677 function_value ((VALTYPE), TYPE_MODE (VALTYPE), 1)
1679 /* But the called function leaves it in the first "input" register. */
1681 #define FUNCTION_OUTGOING_VALUE(VALTYPE, FUNC) \
1682 function_value ((VALTYPE), TYPE_MODE (VALTYPE), 0)
1684 /* Define how to find the value returned by a library function
1685 assuming the value has mode MODE. */
1687 #define LIBCALL_VALUE(MODE) \
1688 function_value (NULL_TREE, (MODE), 1)
1690 /* 1 if N is a possible register number for a function value
1691 as seen by the caller.
1692 On SPARC, the first "output" reg is used for integer values,
1693 and the first floating point register is used for floating point values. */
1695 #define FUNCTION_VALUE_REGNO_P(N) ((N) == 8 || (N) == 32)
1697 /* Define the size of space to allocate for the return value of an
1700 #define APPLY_RESULT_SIZE 16
1702 /* 1 if N is a possible register number for function argument passing.
1703 On SPARC, these are the "output" registers. v9 also uses %f0-%f31. */
1705 #define FUNCTION_ARG_REGNO_P(N) \
1707 ? (((N) >= 8 && (N) <= 13) || ((N) >= 32 && (N) <= 63)) \
1708 : ((N) >= 8 && (N) <= 13))
1710 /* Define a data type for recording info about an argument list
1711 during the scan of that argument list. This data type should
1712 hold all necessary information about the function itself
1713 and about the args processed so far, enough to enable macros
1714 such as FUNCTION_ARG to determine where the next arg should go.
1716 On SPARC (!v9), this is a single integer, which is a number of words
1717 of arguments scanned so far (including the invisible argument,
1718 if any, which holds the structure-value-address).
1719 Thus 7 or more means all following args should go on the stack.
1721 For v9, we also need to know whether a prototype is present. */
1724 int words; /* number of words passed so far */
1725 int prototype_p; /* non-zero if a prototype is present */
1726 int libcall_p; /* non-zero if a library call */
1728 #define CUMULATIVE_ARGS struct sparc_args
1730 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1731 for a call to a function whose data type is FNTYPE.
1732 For a library call, FNTYPE is 0. */
1734 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT) \
1735 init_cumulative_args (& (CUM), (FNTYPE), (LIBNAME), (INDIRECT));
1737 /* Update the data in CUM to advance over an argument
1738 of mode MODE and data type TYPE.
1739 TYPE is null for libcalls where that information may not be available. */
1741 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1742 function_arg_advance (& (CUM), (MODE), (TYPE), (NAMED))
1744 /* Nonzero if we do not know how to pass TYPE solely in registers. */
1746 #define MUST_PASS_IN_STACK(MODE,TYPE) \
1748 && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
1749 || TREE_ADDRESSABLE (TYPE)))
1751 /* Determine where to put an argument to a function.
1752 Value is zero to push the argument on the stack,
1753 or a hard register in which to store the argument.
1755 MODE is the argument's machine mode.
1756 TYPE is the data type of the argument (as a tree).
1757 This is null for libcalls where that information may
1759 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1760 the preceding args and about the function being called.
1761 NAMED is nonzero if this argument is a named parameter
1762 (otherwise it is an extra parameter matching an ellipsis). */
1764 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1765 function_arg (& (CUM), (MODE), (TYPE), (NAMED), 0)
1767 /* Define where a function finds its arguments.
1768 This is different from FUNCTION_ARG because of register windows. */
1770 #define FUNCTION_INCOMING_ARG(CUM, MODE, TYPE, NAMED) \
1771 function_arg (& (CUM), (MODE), (TYPE), (NAMED), 1)
1773 /* For an arg passed partly in registers and partly in memory,
1774 this is the number of registers used.
1775 For args passed entirely in registers or entirely in memory, zero. */
1777 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
1778 function_arg_partial_nregs (& (CUM), (MODE), (TYPE), (NAMED))
1780 /* A C expression that indicates when an argument must be passed by reference.
1781 If nonzero for an argument, a copy of that argument is made in memory and a
1782 pointer to the argument is passed instead of the argument itself.
1783 The pointer is passed in whatever way is appropriate for passing a pointer
1786 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
1787 function_arg_pass_by_reference (& (CUM), (MODE), (TYPE), (NAMED))
1789 /* If defined, a C expression which determines whether, and in which direction,
1790 to pad out an argument with extra space. The value should be of type
1791 `enum direction': either `upward' to pad above the argument,
1792 `downward' to pad below, or `none' to inhibit padding. */
1794 #define FUNCTION_ARG_PADDING(MODE, TYPE) \
1795 function_arg_padding ((MODE), (TYPE))
1797 /* If defined, a C expression that gives the alignment boundary, in bits,
1798 of an argument with the specified mode and type. If it is not defined,
1799 PARM_BOUNDARY is used for all arguments.
1800 For sparc64, objects requiring 16 byte alignment are passed that way. */
1802 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
1804 && (GET_MODE_ALIGNMENT (MODE) == 128 \
1805 || ((TYPE) && TYPE_ALIGN (TYPE) == 128))) \
1806 ? 128 : PARM_BOUNDARY)
1808 /* Define the information needed to generate branch and scc insns. This is
1809 stored from the compare operation. Note that we can't use "rtx" here
1810 since it hasn't been defined! */
1812 extern GTY(()) rtx sparc_compare_op0;
1813 extern GTY(()) rtx sparc_compare_op1;
1816 /* Generate the special assembly code needed to tell the assembler whatever
1817 it might need to know about the return value of a function.
1819 For Sparc assemblers, we need to output a .proc pseudo-op which conveys
1820 information to the assembler relating to peephole optimization (done in
1823 #define ASM_DECLARE_RESULT(FILE, RESULT) \
1824 fprintf ((FILE), "\t.proc\t0%lo\n", sparc_type_code (TREE_TYPE (RESULT)))
1826 /* Output the special assembly code needed to tell the assembler some
1827 register is used as global register variable.
1829 SPARC 64bit psABI declares registers %g2 and %g3 as application
1830 registers and %g6 and %g7 as OS registers. Any object using them
1831 should declare (for %g2/%g3 has to, for %g6/%g7 can) that it uses them
1832 and how they are used (scratch or some global variable).
1833 Linker will then refuse to link together objects which use those
1834 registers incompatibly.
1836 Unless the registers are used for scratch, two different global
1837 registers cannot be declared to the same name, so in the unlikely
1838 case of a global register variable occupying more than one register
1839 we prefix the second and following registers with .gnu.part1. etc. */
1841 extern char sparc_hard_reg_printed[8];
1843 #ifdef HAVE_AS_REGISTER_PSEUDO_OP
1844 #define ASM_DECLARE_REGISTER_GLOBAL(FILE, DECL, REGNO, NAME) \
1846 if (TARGET_ARCH64) \
1848 int end = HARD_REGNO_NREGS ((REGNO), DECL_MODE (decl)) + (REGNO); \
1850 for (reg = (REGNO); reg < 8 && reg < end; reg++) \
1851 if ((reg & ~1) == 2 || (reg & ~1) == 6) \
1853 if (reg == (REGNO)) \
1854 fprintf ((FILE), "\t.register\t%%g%d, %s\n", reg, (NAME)); \
1856 fprintf ((FILE), "\t.register\t%%g%d, .gnu.part%d.%s\n", \
1857 reg, reg - (REGNO), (NAME)); \
1858 sparc_hard_reg_printed[reg] = 1; \
1865 /* Emit rtl for profiling. */
1866 #define PROFILE_HOOK(LABEL) sparc_profile_hook (LABEL)
1868 /* All the work done in PROFILE_HOOK, but still required. */
1869 #define FUNCTION_PROFILER(FILE, LABELNO) do { } while (0)
1871 /* Set the name of the mcount function for the system. */
1872 #define MCOUNT_FUNCTION "*mcount"
1874 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1875 the stack pointer does not matter. The value is tested only in
1876 functions that have frame pointers.
1877 No definition is equivalent to always zero. */
1879 #define EXIT_IGNORE_STACK \
1880 (get_frame_size () != 0 \
1881 || current_function_calls_alloca || current_function_outgoing_args_size)
1883 #define DELAY_SLOTS_FOR_EPILOGUE \
1884 (TARGET_FLAT ? sparc_flat_epilogue_delay_slots () : 1)
1885 #define ELIGIBLE_FOR_EPILOGUE_DELAY(trial, slots_filled) \
1886 (TARGET_FLAT ? sparc_flat_eligible_for_epilogue_delay (trial, slots_filled) \
1887 : eligible_for_epilogue_delay (trial, slots_filled))
1889 /* Define registers used by the epilogue and return instruction. */
1890 #define EPILOGUE_USES(REGNO) \
1891 (!TARGET_FLAT && REGNO == 31)
1893 /* Length in units of the trampoline for entering a nested function. */
1895 #define TRAMPOLINE_SIZE (TARGET_ARCH64 ? 32 : 16)
1897 #define TRAMPOLINE_ALIGNMENT 128 /* 16 bytes */
1899 /* Emit RTL insns to initialize the variable parts of a trampoline.
1900 FNADDR is an RTX for the address of the function's pure code.
1901 CXT is an RTX for the static chain value for the function. */
1903 #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
1904 if (TARGET_ARCH64) \
1905 sparc64_initialize_trampoline (TRAMP, FNADDR, CXT); \
1907 sparc_initialize_trampoline (TRAMP, FNADDR, CXT)
1909 /* Generate necessary RTL for __builtin_saveregs(). */
1911 #define EXPAND_BUILTIN_SAVEREGS() sparc_builtin_saveregs ()
1913 /* Implement `va_start' for varargs and stdarg. */
1914 #define EXPAND_BUILTIN_VA_START(stdarg, valist, nextarg) \
1915 sparc_va_start (stdarg, valist, nextarg)
1917 /* Implement `va_arg'. */
1918 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
1919 sparc_va_arg (valist, type)
1921 /* Define this macro if the location where a function argument is passed
1922 depends on whether or not it is a named argument.
1924 This macro controls how the NAMED argument to FUNCTION_ARG
1925 is set for varargs and stdarg functions. With this macro defined,
1926 the NAMED argument is always true for named arguments, and false for
1927 unnamed arguments. If this is not defined, but SETUP_INCOMING_VARARGS
1928 is defined, then all arguments are treated as named. Otherwise, all named
1929 arguments except the last are treated as named.
1930 For the v9 we want NAMED to mean what it says it means. */
1932 #define STRICT_ARGUMENT_NAMING TARGET_V9
1934 /* We do not allow sibling calls if -mflat, nor
1935 we do not allow indirect calls to be optimized into sibling calls.
1937 Also, on sparc 32-bit we cannot emit a sibling call when the
1938 current function returns a structure. This is because the "unimp
1939 after call" convention would cause the callee to return to the
1940 wrong place. The generic code already disallows cases where the
1941 function being called returns a structure.
1943 It may seem strange how this last case could occur. Usually there
1944 is code after the call which jumps to epilogue code which dumps the
1945 return value into the struct return area. That ought to invalidate
1946 the sibling call right? Well, in the c++ case we can end up passing
1947 the pointer to the struct return area to a constructor (which returns
1948 void) and then nothing else happens. Such a sibling call would look
1949 valid without the added check here. */
1950 #define FUNCTION_OK_FOR_SIBCALL(DECL) \
1953 && (TARGET_ARCH64 || ! current_function_returns_struct))
1955 /* Generate RTL to flush the register windows so as to make arbitrary frames
1957 #define SETUP_FRAME_ADDRESSES() \
1958 emit_insn (gen_flush_register_windows ())
1960 /* Given an rtx for the address of a frame,
1961 return an rtx for the address of the word in the frame
1962 that holds the dynamic chain--the previous frame's address.
1963 ??? -mflat support? */
1964 #define DYNAMIC_CHAIN_ADDRESS(frame) plus_constant (frame, 14 * UNITS_PER_WORD)
1966 /* The return address isn't on the stack, it is in a register, so we can't
1967 access it from the current frame pointer. We can access it from the
1968 previous frame pointer though by reading a value from the register window
1970 #define RETURN_ADDR_IN_PREVIOUS_FRAME
1972 /* This is the offset of the return address to the true next instruction to be
1973 executed for the current function. */
1974 #define RETURN_ADDR_OFFSET \
1975 (8 + 4 * (! TARGET_ARCH64 && current_function_returns_struct))
1977 /* The current return address is in %i7. The return address of anything
1978 farther back is in the register window save area at [%fp+60]. */
1979 /* ??? This ignores the fact that the actual return address is +8 for normal
1980 returns, and +12 for structure returns. */
1981 #define RETURN_ADDR_RTX(count, frame) \
1983 ? gen_rtx_REG (Pmode, 31) \
1984 : gen_rtx_MEM (Pmode, \
1985 memory_address (Pmode, plus_constant (frame, \
1986 15 * UNITS_PER_WORD \
1987 + SPARC_STACK_BIAS))))
1989 /* Before the prologue, the return address is %o7 + 8. OK, sometimes it's
1990 +12, but always using +8 is close enough for frame unwind purposes.
1991 Actually, just using %o7 is close enough for unwinding, but %o7+8
1992 is something you can return to. */
1993 #define INCOMING_RETURN_ADDR_RTX \
1994 plus_constant (gen_rtx_REG (word_mode, 15), 8)
1995 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (15)
1997 /* The offset from the incoming value of %sp to the top of the stack frame
1998 for the current function. On sparc64, we have to account for the stack
2000 #define INCOMING_FRAME_SP_OFFSET SPARC_STACK_BIAS
2002 /* Describe how we implement __builtin_eh_return. */
2003 #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + 24 : INVALID_REGNUM)
2004 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 1) /* %g1 */
2005 #define EH_RETURN_HANDLER_RTX gen_rtx_REG (Pmode, 31) /* %i7 */
2007 /* Select a format to encode pointers in exception handling data. CODE
2008 is 0 for data, 1 for code labels, 2 for function pointers. GLOBAL is
2009 true if the symbol may be affected by dynamic relocations.
2011 If assembler and linker properly support .uaword %r_disp32(foo),
2012 then use PC relative 32-bit relocations instead of absolute relocs
2013 for shared libraries. On sparc64, use pc relative 32-bit relocs even
2014 for binaries, to save memory.
2016 binutils 2.12 would emit a R_SPARC_DISP32 dynamic relocation if the
2017 symbol %r_disp32() is against was not local, but .hidden. In that
2018 case, we have to use DW_EH_PE_absptr for pic personality. */
2019 #ifdef HAVE_AS_SPARC_UA_PCREL
2020 #ifdef HAVE_AS_SPARC_UA_PCREL_HIDDEN
2021 #define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
2023 ? (GLOBAL ? DW_EH_PE_indirect : 0) | DW_EH_PE_pcrel | DW_EH_PE_sdata4\
2024 : ((TARGET_ARCH64 && ! GLOBAL) \
2025 ? (DW_EH_PE_pcrel | DW_EH_PE_sdata4) \
2028 #define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
2030 ? (GLOBAL ? DW_EH_PE_absptr : (DW_EH_PE_pcrel | DW_EH_PE_sdata4)) \
2031 : ((TARGET_ARCH64 && ! GLOBAL) \
2032 ? (DW_EH_PE_pcrel | DW_EH_PE_sdata4) \
2036 /* Emit a PC-relative relocation. */
2037 #define ASM_OUTPUT_DWARF_PCREL(FILE, SIZE, LABEL) \
2039 fputs (integer_asm_op (SIZE, FALSE), FILE); \
2040 fprintf (FILE, "%%r_disp%d(", SIZE * 8); \
2041 assemble_name (FILE, LABEL); \
2042 fputc (')', FILE); \
2046 /* Addressing modes, and classification of registers for them. */
2048 /* #define HAVE_POST_INCREMENT 0 */
2049 /* #define HAVE_POST_DECREMENT 0 */
2051 /* #define HAVE_PRE_DECREMENT 0 */
2052 /* #define HAVE_PRE_INCREMENT 0 */
2054 /* Macros to check register numbers against specific register classes. */
2056 /* These assume that REGNO is a hard or pseudo reg number.
2057 They give nonzero only if REGNO is a hard reg of the suitable class
2058 or a pseudo reg currently allocated to a suitable hard reg.
2059 Since they use reg_renumber, they are safe only once reg_renumber
2060 has been allocated, which happens in local-alloc.c. */
2062 #define REGNO_OK_FOR_INDEX_P(REGNO) \
2063 ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < (unsigned)32 \
2064 || (REGNO) == FRAME_POINTER_REGNUM \
2065 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM)
2067 #define REGNO_OK_FOR_BASE_P(REGNO) REGNO_OK_FOR_INDEX_P (REGNO)
2069 #define REGNO_OK_FOR_FP_P(REGNO) \
2070 (((unsigned) (REGNO) - 32 < (TARGET_V9 ? (unsigned)64 : (unsigned)32)) \
2071 || ((unsigned) reg_renumber[REGNO] - 32 < (TARGET_V9 ? (unsigned)64 : (unsigned)32)))
2072 #define REGNO_OK_FOR_CCFP_P(REGNO) \
2074 && (((unsigned) (REGNO) - 96 < (unsigned)4) \
2075 || ((unsigned) reg_renumber[REGNO] - 96 < (unsigned)4)))
2077 /* Now macros that check whether X is a register and also,
2078 strictly, whether it is in a specified class.
2080 These macros are specific to the SPARC, and may be used only
2081 in code for printing assembler insns and in conditions for
2082 define_optimization. */
2084 /* 1 if X is an fp register. */
2086 #define FP_REG_P(X) (REG_P (X) && REGNO_OK_FOR_FP_P (REGNO (X)))
2088 /* Is X, a REG, an in or global register? i.e. is regno 0..7 or 24..31 */
2089 #define IN_OR_GLOBAL_P(X) (REGNO (X) < 8 || (REGNO (X) >= 24 && REGNO (X) <= 31))
2091 /* Maximum number of registers that can appear in a valid memory address. */
2093 #define MAX_REGS_PER_ADDRESS 2
2095 /* Recognize any constant value that is a valid address.
2096 When PIC, we do not accept an address that would require a scratch reg
2097 to load into a register. */
2099 #define CONSTANT_ADDRESS_P(X) \
2100 (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
2101 || GET_CODE (X) == CONST_INT || GET_CODE (X) == HIGH \
2102 || (GET_CODE (X) == CONST \
2103 && ! (flag_pic && pic_address_needs_scratch (X))))
2105 /* Define this, so that when PIC, reload won't try to reload invalid
2106 addresses which require two reload registers. */
2108 #define LEGITIMATE_PIC_OPERAND_P(X) (! pic_address_needs_scratch (X))
2110 /* Nonzero if the constant value X is a legitimate general operand.
2111 Anything can be made to work except floating point constants.
2112 If TARGET_VIS, 0.0 can be made to work as well. */
2114 #define LEGITIMATE_CONSTANT_P(X) \
2115 (GET_CODE (X) != CONST_DOUBLE || GET_MODE (X) == VOIDmode || \
2117 (GET_MODE (X) == SFmode || GET_MODE (X) == DFmode || \
2118 GET_MODE (X) == TFmode) && \
2119 fp_zero_operand (X, GET_MODE (X))))
2121 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
2122 and check its validity for a certain class.
2123 We have two alternate definitions for each of them.
2124 The usual definition accepts all pseudo regs; the other rejects
2125 them unless they have been allocated suitable hard regs.
2126 The symbol REG_OK_STRICT causes the latter definition to be used.
2128 Most source files want to accept pseudo regs in the hope that
2129 they will get allocated to the class that the insn wants them to be in.
2130 Source files for reload pass need to be strict.
2131 After reload, it makes no difference, since pseudo regs have
2132 been eliminated by then. */
2134 /* Optional extra constraints for this machine.
2136 'Q' handles floating point constants which can be moved into
2137 an integer register with a single sethi instruction.
2139 'R' handles floating point constants which can be moved into
2140 an integer register with a single mov instruction.
2142 'S' handles floating point constants which can be moved into
2143 an integer register using a high/lo_sum sequence.
2145 'T' handles memory addresses where the alignment is known to
2146 be at least 8 bytes.
2148 `U' handles all pseudo registers or a hard even numbered
2149 integer register, needed for ldd/std instructions.
2151 'W' handles the memory operand when moving operands in/out
2152 of 'e' constraint floating point registers. */
2154 #ifndef REG_OK_STRICT
2156 /* Nonzero if X is a hard reg that can be used as an index
2157 or if it is a pseudo reg. */
2158 #define REG_OK_FOR_INDEX_P(X) \
2160 || REGNO (X) == FRAME_POINTER_REGNUM \
2161 || REGNO (X) >= FIRST_PSEUDO_REGISTER)
2163 /* Nonzero if X is a hard reg that can be used as a base reg
2164 or if it is a pseudo reg. */
2165 #define REG_OK_FOR_BASE_P(X) REG_OK_FOR_INDEX_P (X)
2167 /* 'T', 'U' are for aligned memory loads which aren't needed for arch64.
2168 'W' is like 'T' but is assumed true on arch64.
2170 Remember to accept pseudo-registers for memory constraints if reload is
2173 #define EXTRA_CONSTRAINT(OP, C) \
2174 sparc_extra_constraint_check(OP, C, 0)
2178 /* Nonzero if X is a hard reg that can be used as an index. */
2179 #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
2180 /* Nonzero if X is a hard reg that can be used as a base reg. */
2181 #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
2183 #define EXTRA_CONSTRAINT(OP, C) \
2184 sparc_extra_constraint_check(OP, C, 1)
2188 /* Should gcc use [%reg+%lo(xx)+offset] addresses? */
2190 #ifdef HAVE_AS_OFFSETABLE_LO10
2191 #define USE_AS_OFFSETABLE_LO10 1
2193 #define USE_AS_OFFSETABLE_LO10 0
2196 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
2197 that is a valid memory address for an instruction.
2198 The MODE argument is the machine mode for the MEM expression
2199 that wants to use this address.
2201 On SPARC, the actual legitimate addresses must be REG+REG or REG+SMALLINT
2202 ordinarily. This changes a bit when generating PIC.
2204 If you change this, execute "rm explow.o recog.o reload.o". */
2206 #define RTX_OK_FOR_BASE_P(X) \
2207 ((GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
2208 || (GET_CODE (X) == SUBREG \
2209 && GET_CODE (SUBREG_REG (X)) == REG \
2210 && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
2212 #define RTX_OK_FOR_INDEX_P(X) \
2213 ((GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X)) \
2214 || (GET_CODE (X) == SUBREG \
2215 && GET_CODE (SUBREG_REG (X)) == REG \
2216 && REG_OK_FOR_INDEX_P (SUBREG_REG (X))))
2218 #define RTX_OK_FOR_OFFSET_P(X) \
2219 (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0x1000 - 8)
2221 #define RTX_OK_FOR_OLO10_P(X) \
2222 (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0xc00 - 8)
2224 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
2225 { if (RTX_OK_FOR_BASE_P (X)) \
2227 else if (GET_CODE (X) == PLUS) \
2229 register rtx op0 = XEXP (X, 0); \
2230 register rtx op1 = XEXP (X, 1); \
2231 if (flag_pic && op0 == pic_offset_table_rtx) \
2233 if (RTX_OK_FOR_BASE_P (op1)) \
2235 else if (flag_pic == 1 \
2236 && GET_CODE (op1) != REG \
2237 && GET_CODE (op1) != LO_SUM \
2238 && GET_CODE (op1) != MEM \
2239 && (GET_CODE (op1) != CONST_INT \
2240 || SMALL_INT (op1))) \
2243 else if (RTX_OK_FOR_BASE_P (op0)) \
2245 if ((RTX_OK_FOR_INDEX_P (op1) \
2246 /* We prohibit REG + REG for TFmode when \
2247 there are no instructions which accept \
2248 REG+REG instructions. We do this \
2249 because REG+REG is not an offsetable \
2250 address. If we get the situation \
2251 in reload where source and destination \
2252 of a movtf pattern are both MEMs with \
2253 REG+REG address, then only one of them \
2254 gets converted to an offsetable \
2256 && (MODE != TFmode \
2257 || (TARGET_FPU && TARGET_ARCH64 \
2259 && TARGET_HARD_QUAD)) \
2260 /* We prohibit REG + REG on ARCH32 if \
2261 not optimizing for DFmode/DImode \
2262 because then mem_min_alignment is \
2263 likely to be zero after reload and the \
2264 forced split would lack a matching \
2265 splitter pattern. */ \
2266 && (TARGET_ARCH64 || optimize \
2267 || (MODE != DFmode \
2268 && MODE != DImode))) \
2269 || RTX_OK_FOR_OFFSET_P (op1)) \
2272 else if (RTX_OK_FOR_BASE_P (op1)) \
2274 if ((RTX_OK_FOR_INDEX_P (op0) \
2275 /* See the previous comment. */ \
2276 && (MODE != TFmode \
2277 || (TARGET_FPU && TARGET_ARCH64 \
2279 && TARGET_HARD_QUAD)) \
2280 && (TARGET_ARCH64 || optimize \
2281 || (MODE != DFmode \
2282 && MODE != DImode))) \
2283 || RTX_OK_FOR_OFFSET_P (op0)) \
2286 else if (USE_AS_OFFSETABLE_LO10 \
2287 && GET_CODE (op0) == LO_SUM \
2289 && ! TARGET_CM_MEDMID \
2290 && RTX_OK_FOR_OLO10_P (op1)) \
2292 register rtx op00 = XEXP (op0, 0); \
2293 register rtx op01 = XEXP (op0, 1); \
2294 if (RTX_OK_FOR_BASE_P (op00) \
2295 && CONSTANT_P (op01)) \
2298 else if (USE_AS_OFFSETABLE_LO10 \
2299 && GET_CODE (op1) == LO_SUM \
2301 && ! TARGET_CM_MEDMID \
2302 && RTX_OK_FOR_OLO10_P (op0)) \
2304 register rtx op10 = XEXP (op1, 0); \
2305 register rtx op11 = XEXP (op1, 1); \
2306 if (RTX_OK_FOR_BASE_P (op10) \
2307 && CONSTANT_P (op11)) \
2311 else if (GET_CODE (X) == LO_SUM) \
2313 register rtx op0 = XEXP (X, 0); \
2314 register rtx op1 = XEXP (X, 1); \
2315 if (RTX_OK_FOR_BASE_P (op0) \
2316 && CONSTANT_P (op1) \
2317 /* We can't allow TFmode, because an offset \
2318 greater than or equal to the alignment (8) \
2319 may cause the LO_SUM to overflow if !v9. */\
2320 && (MODE != TFmode || TARGET_V9)) \
2323 else if (GET_CODE (X) == CONST_INT && SMALL_INT (X)) \
2327 /* Try machine-dependent ways of modifying an illegitimate address
2328 to be legitimate. If we find one, return the new, valid address.
2329 This macro is used in only one place: `memory_address' in explow.c.
2331 OLDX is the address as it was before break_out_memory_refs was called.
2332 In some cases it is useful to look at this to decide what needs to be done.
2334 MODE and WIN are passed so that this macro can use
2335 GO_IF_LEGITIMATE_ADDRESS.
2337 It is always safe for this macro to do nothing. It exists to recognize
2338 opportunities to optimize the output. */
2340 /* On SPARC, change REG+N into REG+REG, and REG+(X*Y) into REG+REG. */
2341 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
2342 { rtx sparc_x = (X); \
2343 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == MULT) \
2344 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 1), \
2345 force_operand (XEXP (X, 0), NULL_RTX)); \
2346 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == MULT) \
2347 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 0), \
2348 force_operand (XEXP (X, 1), NULL_RTX)); \
2349 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == PLUS) \
2350 (X) = gen_rtx_PLUS (Pmode, force_operand (XEXP (X, 0), NULL_RTX),\
2352 if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == PLUS) \
2353 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 0), \
2354 force_operand (XEXP (X, 1), NULL_RTX)); \
2355 if (sparc_x != (X) && memory_address_p (MODE, X)) \
2357 if (flag_pic) (X) = legitimize_pic_address (X, MODE, 0); \
2358 else if (GET_CODE (X) == PLUS && CONSTANT_ADDRESS_P (XEXP (X, 1))) \
2359 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 0), \
2360 copy_to_mode_reg (Pmode, XEXP (X, 1))); \
2361 else if (GET_CODE (X) == PLUS && CONSTANT_ADDRESS_P (XEXP (X, 0))) \
2362 (X) = gen_rtx_PLUS (Pmode, XEXP (X, 1), \
2363 copy_to_mode_reg (Pmode, XEXP (X, 0))); \
2364 else if (GET_CODE (X) == SYMBOL_REF || GET_CODE (X) == CONST \
2365 || GET_CODE (X) == LABEL_REF) \
2366 (X) = copy_to_suggested_reg (X, NULL_RTX, Pmode); \
2367 if (memory_address_p (MODE, X)) \
2370 /* Try a machine-dependent way of reloading an illegitimate address
2371 operand. If we find one, push the reload and jump to WIN. This
2372 macro is used in only one place: `find_reloads_address' in reload.c.
2374 For Sparc 32, we wish to handle addresses by splitting them into
2375 HIGH+LO_SUM pairs, retaining the LO_SUM in the memory reference.
2376 This cuts the number of extra insns by one.
2378 Do nothing when generating PIC code and the address is a
2379 symbolic operand or requires a scratch register. */
2381 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
2383 /* Decompose SImode constants into hi+lo_sum. We do have to \
2384 rerecognize what we produce, so be careful. */ \
2385 if (CONSTANT_P (X) \
2386 && (MODE != TFmode || TARGET_ARCH64) \
2387 && GET_MODE (X) == SImode \
2388 && GET_CODE (X) != LO_SUM && GET_CODE (X) != HIGH \
2390 && (symbolic_operand (X, Pmode) \
2391 || pic_address_needs_scratch (X))) \
2392 && sparc_cmodel <= CM_MEDLOW) \
2394 X = gen_rtx_LO_SUM (GET_MODE (X), \
2395 gen_rtx_HIGH (GET_MODE (X), X), X); \
2396 push_reload (XEXP (X, 0), NULL_RTX, &XEXP (X, 0), NULL, \
2397 BASE_REG_CLASS, GET_MODE (X), VOIDmode, 0, 0, \
2401 /* ??? 64-bit reloads. */ \
2404 /* Go to LABEL if ADDR (a legitimate address expression)
2405 has an effect that depends on the machine mode it is used for.
2406 On the SPARC this is never true. */
2408 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL)
2410 /* Specify the machine mode that this machine uses
2411 for the index in the tablejump instruction. */
2412 /* If we ever implement any of the full models (such as CM_FULLANY),
2413 this has to be DImode in that case */
2414 #ifdef HAVE_GAS_SUBSECTION_ORDERING
2415 #define CASE_VECTOR_MODE \
2416 (! TARGET_PTR64 ? SImode : flag_pic ? SImode : TARGET_CM_MEDLOW ? SImode : DImode)
2418 /* If assembler does not have working .subsection -1, we use DImode for pic, as otherwise
2419 we have to sign extend which slows things down. */
2420 #define CASE_VECTOR_MODE \
2421 (! TARGET_PTR64 ? SImode : flag_pic ? DImode : TARGET_CM_MEDLOW ? SImode : DImode)
2424 /* Define as C expression which evaluates to nonzero if the tablejump
2425 instruction expects the table to contain offsets from the address of the
2427 Do not define this if the table should contain absolute addresses. */
2428 /* #define CASE_VECTOR_PC_RELATIVE 1 */
2430 /* Define this as 1 if `char' should by default be signed; else as 0. */
2431 #define DEFAULT_SIGNED_CHAR 1
2433 /* Max number of bytes we can move from memory to memory
2434 in one reasonably fast instruction. */
2437 #if 0 /* Sun 4 has matherr, so this is no good. */
2438 /* This is the value of the error code EDOM for this machine,
2439 used by the sqrt instruction. */
2440 #define TARGET_EDOM 33
2442 /* This is how to refer to the variable errno. */
2443 #define GEN_ERRNO_RTX \
2444 gen_rtx_MEM (SImode, gen_rtx_SYMBOL_REF (Pmode, "errno"))
2447 /* Define if operations between registers always perform the operation
2448 on the full register even if a narrower mode is specified. */
2449 #define WORD_REGISTER_OPERATIONS
2451 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
2452 will either zero-extend or sign-extend. The value of this macro should
2453 be the code that says which one of the two operations is implicitly
2454 done, NIL if none. */
2455 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
2457 /* Nonzero if access to memory by bytes is slow and undesirable.
2458 For RISC chips, it means that access to memory by bytes is no
2459 better than access by words when possible, so grab a whole word
2460 and maybe make use of that. */
2461 #define SLOW_BYTE_ACCESS 1
2463 /* We assume that the store-condition-codes instructions store 0 for false
2464 and some other value for true. This is the value stored for true. */
2466 #define STORE_FLAG_VALUE 1
2468 /* When a prototype says `char' or `short', really pass an `int'. */
2469 #define PROMOTE_PROTOTYPES (TARGET_ARCH32)
2471 /* Define this to be nonzero if shift instructions ignore all but the low-order
2473 #define SHIFT_COUNT_TRUNCATED 1
2475 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
2476 is done just by pretending it is already truncated. */
2477 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
2479 /* Specify the machine mode that pointers have.
2480 After generation of rtl, the compiler makes no further distinction
2481 between pointers and any other objects of this machine mode. */
2482 #define Pmode (TARGET_ARCH64 ? DImode : SImode)
2484 /* Generate calls to memcpy, memcmp and memset. */
2485 #define TARGET_MEM_FUNCTIONS
2487 /* Add any extra modes needed to represent the condition code.
2489 On the Sparc, we have a "no-overflow" mode which is used when an add or
2490 subtract insn is used to set the condition code. Different branches are
2491 used in this case for some operations.
2493 We also have two modes to indicate that the relevant condition code is
2494 in the floating-point condition code register. One for comparisons which
2495 will generate an exception if the result is unordered (CCFPEmode) and
2496 one for comparisons which will never trap (CCFPmode).
2498 CCXmode and CCX_NOOVmode are only used by v9. */
2500 #define EXTRA_CC_MODES \
2501 CC(CCXmode, "CCX") \
2502 CC(CC_NOOVmode, "CC_NOOV") \
2503 CC(CCX_NOOVmode, "CCX_NOOV") \
2504 CC(CCFPmode, "CCFP") \
2505 CC(CCFPEmode, "CCFPE")
2507 /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE,
2508 return the mode to be used for the comparison. For floating-point,
2509 CCFP[E]mode is used. CC_NOOVmode should be used when the first operand
2510 is a PLUS, MINUS, NEG, or ASHIFT. CCmode should be used when no special
2511 processing is needed. */
2512 #define SELECT_CC_MODE(OP,X,Y) select_cc_mode ((OP), (X), (Y))
2514 /* Return non-zero if MODE implies a floating point inequality can be
2515 reversed. For Sparc this is always true because we have a full
2516 compliment of ordered and unordered comparisons, but until generic
2517 code knows how to reverse it correctly we keep the old definition. */
2518 #define REVERSIBLE_CC_MODE(MODE) ((MODE) != CCFPEmode && (MODE) != CCFPmode)
2520 /* A function address in a call instruction for indexing purposes. */
2521 #define FUNCTION_MODE Pmode
2523 /* Define this if addresses of constant functions
2524 shouldn't be put through pseudo regs where they can be cse'd.
2525 Desirable on machines where ordinary constants are expensive
2526 but a CALL with constant address is cheap. */
2527 #define NO_FUNCTION_CSE
2529 /* alloca should avoid clobbering the old register save area. */
2530 #define SETJMP_VIA_SAVE_AREA
2532 /* Define subroutines to call to handle multiply and divide.
2533 Use the subroutines that Sun's library provides.
2534 The `*' prevents an underscore from being prepended by the compiler. */
2536 #define DIVSI3_LIBCALL "*.div"
2537 #define UDIVSI3_LIBCALL "*.udiv"
2538 #define MODSI3_LIBCALL "*.rem"
2539 #define UMODSI3_LIBCALL "*.urem"
2540 /* .umul is a little faster than .mul. */
2541 #define MULSI3_LIBCALL "*.umul"
2543 /* Define library calls for quad FP operations. These are all part of the
2545 #define ADDTF3_LIBCALL "_Q_add"
2546 #define SUBTF3_LIBCALL "_Q_sub"
2547 #define NEGTF2_LIBCALL "_Q_neg"
2548 #define MULTF3_LIBCALL "_Q_mul"
2549 #define DIVTF3_LIBCALL "_Q_div"
2550 #define FLOATSITF2_LIBCALL "_Q_itoq"
2551 #define FIX_TRUNCTFSI2_LIBCALL "_Q_qtoi"
2552 #define FIXUNS_TRUNCTFSI2_LIBCALL "_Q_qtou"
2553 #define EXTENDSFTF2_LIBCALL "_Q_stoq"
2554 #define TRUNCTFSF2_LIBCALL "_Q_qtos"
2555 #define EXTENDDFTF2_LIBCALL "_Q_dtoq"
2556 #define TRUNCTFDF2_LIBCALL "_Q_qtod"
2557 #define EQTF2_LIBCALL "_Q_feq"
2558 #define NETF2_LIBCALL "_Q_fne"
2559 #define GTTF2_LIBCALL "_Q_fgt"
2560 #define GETF2_LIBCALL "_Q_fge"
2561 #define LTTF2_LIBCALL "_Q_flt"
2562 #define LETF2_LIBCALL "_Q_fle"
2564 /* Assume by default that the _Qp_* 64-bit libcalls are implemented such
2565 that the inputs are fully consumed before the output memory is clobbered. */
2567 #define TARGET_BUGGY_QP_LIB 0
2569 /* We can define the TFmode sqrt optab only if TARGET_FPU. This is because
2570 with soft-float, the SFmode and DFmode sqrt instructions will be absent,
2571 and the compiler will notice and try to use the TFmode sqrt instruction
2572 for calls to the builtin function sqrt, but this fails. */
2573 #define INIT_TARGET_OPTABS \
2575 if (TARGET_ARCH32) \
2577 add_optab->handlers[(int) TFmode].libfunc \
2578 = init_one_libfunc (ADDTF3_LIBCALL); \
2579 sub_optab->handlers[(int) TFmode].libfunc \
2580 = init_one_libfunc (SUBTF3_LIBCALL); \
2581 neg_optab->handlers[(int) TFmode].libfunc \
2582 = init_one_libfunc (NEGTF2_LIBCALL); \
2583 smul_optab->handlers[(int) TFmode].libfunc \
2584 = init_one_libfunc (MULTF3_LIBCALL); \
2585 sdiv_optab->handlers[(int) TFmode].libfunc \
2586 = init_one_libfunc (DIVTF3_LIBCALL); \
2587 eqtf2_libfunc = init_one_libfunc (EQTF2_LIBCALL); \
2588 netf2_libfunc = init_one_libfunc (NETF2_LIBCALL); \
2589 gttf2_libfunc = init_one_libfunc (GTTF2_LIBCALL); \
2590 getf2_libfunc = init_one_libfunc (GETF2_LIBCALL); \
2591 lttf2_libfunc = init_one_libfunc (LTTF2_LIBCALL); \
2592 letf2_libfunc = init_one_libfunc (LETF2_LIBCALL); \
2593 trunctfsf2_libfunc = init_one_libfunc (TRUNCTFSF2_LIBCALL); \
2594 trunctfdf2_libfunc = init_one_libfunc (TRUNCTFDF2_LIBCALL); \
2595 extendsftf2_libfunc = init_one_libfunc (EXTENDSFTF2_LIBCALL); \
2596 extenddftf2_libfunc = init_one_libfunc (EXTENDDFTF2_LIBCALL); \
2597 floatsitf_libfunc = init_one_libfunc (FLOATSITF2_LIBCALL); \
2598 fixtfsi_libfunc = init_one_libfunc (FIX_TRUNCTFSI2_LIBCALL); \
2599 fixunstfsi_libfunc \
2600 = init_one_libfunc (FIXUNS_TRUNCTFSI2_LIBCALL); \
2602 sqrt_optab->handlers[(int) TFmode].libfunc \
2603 = init_one_libfunc ("_Q_sqrt"); \
2605 INIT_SUBTARGET_OPTABS; \
2608 /* This is meant to be redefined in the host dependent files */
2609 #define INIT_SUBTARGET_OPTABS
2611 /* Nonzero if a floating point comparison library call for
2612 mode MODE that will return a boolean value. Zero if one
2613 of the libgcc2 functions is used. */
2614 #define FLOAT_LIB_COMPARE_RETURNS_BOOL(MODE, COMPARISON) ((MODE) == TFmode)
2616 /* Compute extra cost of moving data between one register class
2618 #define GENERAL_OR_I64(C) ((C) == GENERAL_REGS || (C) == I64_REGS)
2619 #define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2) \
2620 (((FP_REG_CLASS_P (CLASS1) && GENERAL_OR_I64 (CLASS2)) \
2621 || (GENERAL_OR_I64 (CLASS1) && FP_REG_CLASS_P (CLASS2)) \
2622 || (CLASS1) == FPCC_REGS || (CLASS2) == FPCC_REGS) \
2623 ? ((sparc_cpu == PROCESSOR_ULTRASPARC \
2624 || sparc_cpu == PROCESSOR_ULTRASPARC3) ? 12 : 6) : 2)
2626 /* Provide the cost of a branch. For pre-v9 processors we use
2627 a value of 3 to take into account the potential annulling of
2628 the delay slot (which ends up being a bubble in the pipeline slot)
2629 plus a cycle to take into consideration the instruction cache
2632 On v9 and later, which have branch prediction facilities, we set
2633 it to the depth of the pipeline as that is the cost of a
2634 mispredicted branch. */
2636 #define BRANCH_COST \
2637 ((sparc_cpu == PROCESSOR_V9 \
2638 || sparc_cpu == PROCESSOR_ULTRASPARC) \
2640 : (sparc_cpu == PROCESSOR_ULTRASPARC3 \
2643 /* The cases that RTX_COSTS handles. */
2645 #define RTX_COSTS_CASES \
2646 case PLUS: case MINUS: case ABS: case NEG: \
2647 case FLOAT: case UNSIGNED_FLOAT: \
2648 case FIX: case UNSIGNED_FIX: \
2649 case FLOAT_EXTEND: case FLOAT_TRUNCATE: \
2651 case COMPARE: case IF_THEN_ELSE: \
2653 case MULT: case DIV: case UDIV: case MOD: case UMOD: \
2654 case CONST_INT: case HIGH: case CONST: \
2655 case LABEL_REF: case SYMBOL_REF: case CONST_DOUBLE:
2657 /* Provide the costs of a rtl expression. This is in the body of a
2660 #define RTX_COSTS(X,CODE,OUTER_CODE) \
2662 return sparc_rtx_costs(X,CODE,OUTER_CODE);
2664 #define ADDRESS_COST(RTX) 1
2666 #define PREFETCH_BLOCK \
2667 ((sparc_cpu == PROCESSOR_ULTRASPARC \
2668 || sparc_cpu == PROCESSOR_ULTRASPARC3) \
2671 #define SIMULTANEOUS_PREFETCHES \
2672 ((sparc_cpu == PROCESSOR_ULTRASPARC) \
2674 : (sparc_cpu == PROCESSOR_ULTRASPARC3 \
2677 /* Control the assembler format that we output. */
2679 /* Output at beginning of assembler file. */
2681 #define ASM_FILE_START(file)
2683 /* A C string constant describing how to begin a comment in the target
2684 assembler language. The compiler assumes that the comment will end at
2685 the end of the line. */
2687 #define ASM_COMMENT_START "!"
2689 /* Output to assembler file text saying following lines
2690 may contain character constants, extra white space, comments, etc. */
2692 #define ASM_APP_ON ""
2694 /* Output to assembler file text saying following lines
2695 no longer contain unusual constructs. */
2697 #define ASM_APP_OFF ""
2699 /* ??? Try to make the style consistent here (_OP?). */
2701 #define ASM_FLOAT ".single"
2702 #define ASM_DOUBLE ".double"
2703 #define ASM_LONGDOUBLE ".xxx" /* ??? Not known (or used yet). */
2705 /* How to refer to registers in assembler output.
2706 This sequence is indexed by compiler's hard-register-number (see above). */
2708 #define REGISTER_NAMES \
2709 {"%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7", \
2710 "%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7", \
2711 "%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7", \
2712 "%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7", \
2713 "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7", \
2714 "%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15", \
2715 "%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23", \
2716 "%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31", \
2717 "%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39", \
2718 "%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47", \
2719 "%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55", \
2720 "%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63", \
2721 "%fcc0", "%fcc1", "%fcc2", "%fcc3", "%icc", "%sfp" }
2723 /* Define additional names for use in asm clobbers and asm declarations. */
2725 #define ADDITIONAL_REGISTER_NAMES \
2726 {{"ccr", SPARC_ICC_REG}, {"cc", SPARC_ICC_REG}}
2728 /* On Sun 4, this limit is 2048. We use 1000 to be safe, since the length
2729 can run past this up to a continuation point. Once we used 1500, but
2730 a single entry in C++ can run more than 500 bytes, due to the length of
2731 mangled symbol names. dbxout.c should really be fixed to do
2732 continuations when they are actually needed instead of trying to
2734 #define DBX_CONTIN_LENGTH 1000
2736 /* This is how to output the definition of a user-level label named NAME,
2737 such as the label on a static function or variable NAME. */
2739 #define ASM_OUTPUT_LABEL(FILE,NAME) \
2740 do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
2742 /* This is how to output a command to make the user-level label named NAME
2743 defined for reference from other files. */
2745 #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
2746 do { fputs ("\t.global ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
2748 /* The prefix to add to user-visible assembler symbols. */
2750 #define USER_LABEL_PREFIX "_"
2752 /* This is how to output a definition of an internal numbered label where
2753 PREFIX is the class of label and NUM is the number within the class. */
2755 #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
2756 fprintf (FILE, "%s%d:\n", PREFIX, NUM)
2758 /* This is how to store into the string LABEL
2759 the symbol_ref name of an internal numbered label where
2760 PREFIX is the class of label and NUM is the number within the class.
2761 This is suitable for output with `assemble_name'. */
2763 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
2764 sprintf ((LABEL), "*%s%ld", (PREFIX), (long)(NUM))
2766 /* This is how we hook in and defer the case-vector until the end of
2768 #define ASM_OUTPUT_ADDR_VEC(LAB,VEC) \
2769 sparc_defer_case_vector ((LAB),(VEC), 0)
2771 #define ASM_OUTPUT_ADDR_DIFF_VEC(LAB,VEC) \
2772 sparc_defer_case_vector ((LAB),(VEC), 1)
2774 /* This is how to output an element of a case-vector that is absolute. */
2776 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
2779 ASM_GENERATE_INTERNAL_LABEL (label, "L", VALUE); \
2780 if (CASE_VECTOR_MODE == SImode) \
2781 fprintf (FILE, "\t.word\t"); \
2783 fprintf (FILE, "\t.xword\t"); \
2784 assemble_name (FILE, label); \
2785 fputc ('\n', FILE); \
2788 /* This is how to output an element of a case-vector that is relative.
2789 (SPARC uses such vectors only when generating PIC.) */
2791 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
2794 ASM_GENERATE_INTERNAL_LABEL (label, "L", (VALUE)); \
2795 if (CASE_VECTOR_MODE == SImode) \
2796 fprintf (FILE, "\t.word\t"); \
2798 fprintf (FILE, "\t.xword\t"); \
2799 assemble_name (FILE, label); \
2800 ASM_GENERATE_INTERNAL_LABEL (label, "L", (REL)); \
2801 fputc ('-', FILE); \
2802 assemble_name (FILE, label); \
2803 fputc ('\n', FILE); \
2806 /* This is what to output before and after case-vector (both
2807 relative and absolute). If .subsection -1 works, we put case-vectors
2808 at the beginning of the current section. */
2810 #ifdef HAVE_GAS_SUBSECTION_ORDERING
2812 #define ASM_OUTPUT_ADDR_VEC_START(FILE) \
2813 fprintf(FILE, "\t.subsection\t-1\n")
2815 #define ASM_OUTPUT_ADDR_VEC_END(FILE) \
2816 fprintf(FILE, "\t.previous\n")
2820 /* This is how to output an assembler line
2821 that says to advance the location counter
2822 to a multiple of 2**LOG bytes. */
2824 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
2826 fprintf (FILE, "\t.align %d\n", (1<<(LOG)))
2828 #define ASM_OUTPUT_SKIP(FILE,SIZE) \
2829 fprintf (FILE, "\t.skip %u\n", (SIZE))
2831 /* This says how to output an assembler line
2832 to define a global common symbol. */
2834 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
2835 ( fputs ("\t.common ", (FILE)), \
2836 assemble_name ((FILE), (NAME)), \
2837 fprintf ((FILE), ",%u,\"bss\"\n", (SIZE)))
2839 /* This says how to output an assembler line to define a local common
2842 #define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGNED) \
2843 ( fputs ("\t.reserve ", (FILE)), \
2844 assemble_name ((FILE), (NAME)), \
2845 fprintf ((FILE), ",%u,\"bss\",%u\n", \
2846 (SIZE), ((ALIGNED) / BITS_PER_UNIT)))
2848 /* A C statement (sans semicolon) to output to the stdio stream
2849 FILE the assembler definition of uninitialized global DECL named
2850 NAME whose size is SIZE bytes and alignment is ALIGN bytes.
2851 Try to use asm_output_aligned_bss to implement this macro. */
2853 #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
2855 fputs (".globl ", (FILE)); \
2856 assemble_name ((FILE), (NAME)); \
2857 fputs ("\n", (FILE)); \
2858 ASM_OUTPUT_ALIGNED_LOCAL (FILE, NAME, SIZE, ALIGN); \
2861 /* Store in OUTPUT a string (made with alloca) containing
2862 an assembler-name for a local static variable named NAME.
2863 LABELNO is an integer which is different for each call. */
2865 #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
2866 ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
2867 sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
2869 #define IDENT_ASM_OP "\t.ident\t"
2871 /* Output #ident as a .ident. */
2873 #define ASM_OUTPUT_IDENT(FILE, NAME) \
2874 fprintf (FILE, "%s\"%s\"\n", IDENT_ASM_OP, NAME);
2876 /* Output code to add DELTA to the first argument, and then jump to FUNCTION.
2877 Used for C++ multiple inheritance. */
2878 #define ASM_OUTPUT_MI_THUNK(FILE, THUNK_FNDECL, DELTA, FUNCTION) \
2879 sparc_output_mi_thunk (FILE, THUNK_FNDECL, DELTA, FUNCTION)
2881 #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \
2882 ((CHAR) == '#' || (CHAR) == '*' || (CHAR) == '^' || (CHAR) == '(' || (CHAR) == '_')
2884 /* Print operand X (an rtx) in assembler syntax to file FILE.
2885 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2886 For `%' followed by punctuation, CODE is the punctuation and X is null. */
2888 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
2890 /* Print a memory address as an operand to reference that memory location. */
2892 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
2893 { register rtx base, index = 0; \
2895 register rtx addr = ADDR; \
2896 if (GET_CODE (addr) == REG) \
2897 fputs (reg_names[REGNO (addr)], FILE); \
2898 else if (GET_CODE (addr) == PLUS) \
2900 if (GET_CODE (XEXP (addr, 0)) == CONST_INT) \
2901 offset = INTVAL (XEXP (addr, 0)), base = XEXP (addr, 1);\
2902 else if (GET_CODE (XEXP (addr, 1)) == CONST_INT) \
2903 offset = INTVAL (XEXP (addr, 1)), base = XEXP (addr, 0);\
2905 base = XEXP (addr, 0), index = XEXP (addr, 1); \
2906 if (GET_CODE (base) == LO_SUM) \
2908 if (! USE_AS_OFFSETABLE_LO10 \
2910 || TARGET_CM_MEDMID) \
2912 output_operand (XEXP (base, 0), 0); \
2913 fputs ("+%lo(", FILE); \
2914 output_address (XEXP (base, 1)); \
2915 fprintf (FILE, ")+%d", offset); \
2919 fputs (reg_names[REGNO (base)], FILE); \
2921 fprintf (FILE, "%+d", offset); \
2922 else if (GET_CODE (index) == REG) \
2923 fprintf (FILE, "+%s", reg_names[REGNO (index)]); \
2924 else if (GET_CODE (index) == SYMBOL_REF \
2925 || GET_CODE (index) == CONST) \
2926 fputc ('+', FILE), output_addr_const (FILE, index); \
2930 else if (GET_CODE (addr) == MINUS \
2931 && GET_CODE (XEXP (addr, 1)) == LABEL_REF) \
2933 output_addr_const (FILE, XEXP (addr, 0)); \
2934 fputs ("-(", FILE); \
2935 output_addr_const (FILE, XEXP (addr, 1)); \
2936 fputs ("-.)", FILE); \
2938 else if (GET_CODE (addr) == LO_SUM) \
2940 output_operand (XEXP (addr, 0), 0); \
2941 if (TARGET_CM_MEDMID) \
2942 fputs ("+%l44(", FILE); \
2944 fputs ("+%lo(", FILE); \
2945 output_address (XEXP (addr, 1)); \
2946 fputc (')', FILE); \
2948 else if (flag_pic && GET_CODE (addr) == CONST \
2949 && GET_CODE (XEXP (addr, 0)) == MINUS \
2950 && GET_CODE (XEXP (XEXP (addr, 0), 1)) == CONST \
2951 && GET_CODE (XEXP (XEXP (XEXP (addr, 0), 1), 0)) == MINUS \
2952 && XEXP (XEXP (XEXP (XEXP (addr, 0), 1), 0), 1) == pc_rtx) \
2954 addr = XEXP (addr, 0); \
2955 output_addr_const (FILE, XEXP (addr, 0)); \
2956 /* Group the args of the second CONST in parenthesis. */ \
2957 fputs ("-(", FILE); \
2958 /* Skip past the second CONST--it does nothing for us. */\
2959 output_addr_const (FILE, XEXP (XEXP (addr, 1), 0)); \
2960 /* Close the parenthesis. */ \
2961 fputc (')', FILE); \
2965 output_addr_const (FILE, addr); \
2969 /* Define the codes that are matched by predicates in sparc.c. */
2971 #define PREDICATE_CODES \
2972 {"reg_or_0_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
2973 {"const1_operand", {CONST_INT}}, \
2974 {"fp_zero_operand", {CONST_DOUBLE}}, \
2975 {"fp_register_operand", {SUBREG, REG}}, \
2976 {"intreg_operand", {SUBREG, REG}}, \
2977 {"fcc_reg_operand", {REG}}, \
2978 {"fcc0_reg_operand", {REG}}, \
2979 {"icc_or_fcc_reg_operand", {REG}}, \
2980 {"restore_operand", {REG}}, \
2981 {"call_operand", {MEM}}, \
2982 {"call_operand_address", {SYMBOL_REF, LABEL_REF, CONST, CONST_DOUBLE, \
2983 ADDRESSOF, SUBREG, REG, PLUS, LO_SUM, CONST_INT}}, \
2984 {"symbolic_operand", {SYMBOL_REF, LABEL_REF, CONST}}, \
2985 {"symbolic_memory_operand", {SUBREG, MEM}}, \
2986 {"label_ref_operand", {LABEL_REF}}, \
2987 {"sp64_medium_pic_operand", {CONST}}, \
2988 {"data_segment_operand", {SYMBOL_REF, PLUS, CONST}}, \
2989 {"text_segment_operand", {LABEL_REF, SYMBOL_REF, PLUS, CONST}}, \
2990 {"reg_or_nonsymb_mem_operand", {SUBREG, REG, MEM}}, \
2991 {"splittable_symbolic_memory_operand", {MEM}}, \
2992 {"splittable_immediate_memory_operand", {MEM}}, \
2993 {"eq_or_neq", {EQ, NE}}, \
2994 {"normal_comp_operator", {GE, GT, LE, LT, GTU, LEU}}, \
2995 {"noov_compare_op", {NE, EQ, GE, GT, LE, LT, GEU, GTU, LEU, LTU}}, \
2996 {"noov_compare64_op", {NE, EQ, GE, GT, LE, LT, GEU, GTU, LEU, LTU}}, \
2997 {"v9_regcmp_op", {EQ, NE, GE, LT, LE, GT}}, \
2998 {"extend_op", {SIGN_EXTEND, ZERO_EXTEND}}, \
2999 {"cc_arithop", {AND, IOR, XOR}}, \
3000 {"cc_arithopn", {AND, IOR}}, \
3001 {"arith_operand", {SUBREG, REG, CONST_INT}}, \
3002 {"arith_add_operand", {SUBREG, REG, CONST_INT}}, \
3003 {"arith11_operand", {SUBREG, REG, CONST_INT}}, \
3004 {"arith10_operand", {SUBREG, REG, CONST_INT}}, \
3005 {"arith_double_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3006 {"arith_double_add_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3007 {"arith11_double_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3008 {"arith10_double_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
3009 {"small_int", {CONST_INT}}, \
3010 {"small_int_or_double", {CONST_INT, CONST_DOUBLE}}, \
3011 {"uns_small_int", {CONST_INT}}, \
3012 {"uns_arith_operand", {SUBREG, REG, CONST_INT}}, \
3013 {"clobbered_register", {REG}}, \
3014 {"input_operand", {SUBREG, REG, CONST_INT, MEM, CONST}}, \
3015 {"const64_operand", {CONST_INT, CONST_DOUBLE}}, \
3016 {"const64_high_operand", {CONST_INT, CONST_DOUBLE}},
3018 /* The number of Pmode words for the setjmp buffer. */
3019 #define JMP_BUF_SIZE 12
3021 #define DONT_ACCESS_GBLS_AFTER_EPILOGUE (flag_pic)
OSDN Git Service
