1 /* Target definitions for GNU compiler for PowerPC running System V.4
2 Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001
3 Free Software Foundation, Inc.
4 Contributed by Cygnus Support.
6 This file is part of GNU CC.
8 GNU CC is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
13 GNU CC is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GNU CC; see the file COPYING. If not, write to
20 the Free Software Foundation, 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
24 /* Yes! We are ELF. */
25 #define TARGET_OBJECT_FORMAT OBJECT_ELF
27 /* Default ABI to compile code for. */
28 #define DEFAULT_ABI rs6000_current_abi
30 /* Default ABI to use. */
31 #define RS6000_ABI_NAME "sysv"
33 /* Override rs6000.h definition. */
34 #undef ASM_DEFAULT_SPEC
35 #define ASM_DEFAULT_SPEC "-mppc"
37 /* Override rs6000.h definition. */
38 #undef CPP_DEFAULT_SPEC
39 #define CPP_DEFAULT_SPEC "-D_ARCH_PPC"
41 /* Small data support types. */
42 enum rs6000_sdata_type {
43 SDATA_NONE, /* No small data support. */
44 SDATA_DATA, /* Just put data in .sbss/.sdata, don't use relocs. */
45 SDATA_SYSV, /* Use r13 to point to .sdata/.sbss. */
46 SDATA_EABI /* Use r13 like above, r2 points to .sdata2/.sbss2. */
49 extern enum rs6000_sdata_type rs6000_sdata;
51 /* V.4/eabi switches. */
52 #define MASK_NO_BITFIELD_TYPE 0x40000000 /* Set PCC_BITFIELD_TYPE_MATTERS to 0. */
53 #define MASK_STRICT_ALIGN 0x20000000 /* Set STRICT_ALIGNMENT to 1. */
54 #define MASK_RELOCATABLE 0x10000000 /* GOT pointers are PC relative. */
55 #define MASK_EABI 0x08000000 /* Adhere to eabi, not System V spec. */
56 #define MASK_LITTLE_ENDIAN 0x04000000 /* Target is little endian. */
57 #define MASK_REGNAMES 0x02000000 /* Use alternate register names. */
58 #define MASK_PROTOTYPE 0x01000000 /* Only prototyped fcns pass variable args. */
59 #define MASK_NO_BITFIELD_WORD 0x00800000 /* Bitfields cannot cross word boundaries */
61 #define TARGET_NO_BITFIELD_TYPE (target_flags & MASK_NO_BITFIELD_TYPE)
62 #define TARGET_STRICT_ALIGN (target_flags & MASK_STRICT_ALIGN)
63 #define TARGET_RELOCATABLE (target_flags & MASK_RELOCATABLE)
64 #define TARGET_EABI (target_flags & MASK_EABI)
65 #define TARGET_LITTLE_ENDIAN (target_flags & MASK_LITTLE_ENDIAN)
66 #define TARGET_REGNAMES (target_flags & MASK_REGNAMES)
67 #define TARGET_PROTOTYPE (target_flags & MASK_PROTOTYPE)
68 #define TARGET_NO_BITFIELD_WORD (target_flags & MASK_NO_BITFIELD_WORD)
69 #define TARGET_TOC ((target_flags & MASK_64BIT) \
70 || ((target_flags & (MASK_RELOCATABLE \
71 | MASK_MINIMAL_TOC)) \
73 || DEFAULT_ABI == ABI_AIX)
75 #define TARGET_BITFIELD_TYPE (! TARGET_NO_BITFIELD_TYPE)
76 #define TARGET_BIG_ENDIAN (! TARGET_LITTLE_ENDIAN)
77 #define TARGET_NO_PROTOTYPE (! TARGET_PROTOTYPE)
78 #define TARGET_NO_TOC (! TARGET_TOC)
79 #define TARGET_NO_EABI (! TARGET_EABI)
81 /* Strings provided by SUBTARGET_OPTIONS */
82 extern const char *rs6000_abi_name;
83 extern const char *rs6000_sdata_name;
85 /* Override rs6000.h definition. */
86 #undef SUBTARGET_OPTIONS
87 #define SUBTARGET_OPTIONS \
88 { "call-", &rs6000_abi_name, N_("Select ABI calling convention") }, \
89 { "sdata=", &rs6000_sdata_name, N_("Select method for sdata handling") }
91 /* Max # of bytes for variables to automatically be put into the .sdata
92 or .sdata2 sections. */
93 extern int g_switch_value; /* Value of the -G xx switch. */
94 extern int g_switch_set; /* Whether -G xx was passed. */
96 #define SDATA_DEFAULT_SIZE 8
98 /* Note, V.4 no longer uses a normal TOC, so make -mfull-toc, be just
99 the same as -mminimal-toc. */
100 /* Override rs6000.h definition. */
101 #undef SUBTARGET_SWITCHES
102 #define SUBTARGET_SWITCHES \
103 { "bit-align", -MASK_NO_BITFIELD_TYPE, \
104 N_("Align to the base type of the bit-field") }, \
105 { "no-bit-align", MASK_NO_BITFIELD_TYPE, \
106 N_("Don't align to the base type of the bit-field") }, \
107 { "strict-align", MASK_STRICT_ALIGN, \
108 N_("Don't assume that unaligned accesses are handled by the system") }, \
109 { "no-strict-align", -MASK_STRICT_ALIGN, \
110 N_("Assume that unaligned accesses are handled by the system") }, \
111 { "relocatable", MASK_RELOCATABLE | MASK_MINIMAL_TOC | MASK_NO_FP_IN_TOC, \
112 N_("Produce code relocatable at runtime") }, \
113 { "no-relocatable", -MASK_RELOCATABLE, \
114 N_("Don't produce code relocatable at runtime") }, \
115 { "relocatable-lib", MASK_RELOCATABLE | MASK_MINIMAL_TOC | MASK_NO_FP_IN_TOC, \
116 N_("Produce code relocatable at runtime") }, \
117 { "no-relocatable-lib", -MASK_RELOCATABLE, \
118 N_("Don't produce code relocatable at runtime") }, \
119 { "little-endian", MASK_LITTLE_ENDIAN, \
120 N_("Produce little endian code") }, \
121 { "little", MASK_LITTLE_ENDIAN, \
122 N_("Produce little endian code") }, \
123 { "big-endian", -MASK_LITTLE_ENDIAN, \
124 N_("Produce big endian code") }, \
125 { "big", -MASK_LITTLE_ENDIAN, \
126 N_("Produce big endian code") }, \
127 { "no-toc", 0, N_("no description yet") }, \
128 { "toc", MASK_MINIMAL_TOC, N_("no description yet") }, \
129 { "full-toc", MASK_MINIMAL_TOC, N_("no description yet") }, \
130 { "prototype", MASK_PROTOTYPE, N_("no description yet") }, \
131 { "no-prototype", -MASK_PROTOTYPE, N_("no description yet") }, \
132 { "no-traceback", 0, N_("no description yet") }, \
133 { "eabi", MASK_EABI, N_("Use EABI") }, \
134 { "no-eabi", -MASK_EABI, N_("Don't use EABI") }, \
135 { "bit-word", -MASK_NO_BITFIELD_WORD, "" }, \
136 { "no-bit-word", MASK_NO_BITFIELD_WORD, \
137 N_("Do not allow bit-fields to cross word boundaries") }, \
138 { "regnames", MASK_REGNAMES, \
139 N_("Use alternate register names") }, \
140 { "no-regnames", -MASK_REGNAMES, \
141 N_("Don't use alternate register names") }, \
142 { "sdata", 0, N_("no description yet") }, \
143 { "no-sdata", 0, N_("no description yet") }, \
145 N_("Link with libsim.a, libc.a and sim-crt0.o") }, \
147 N_("Link with libads.a, libc.a and crt0.o") }, \
148 { "yellowknife", 0, \
149 N_("Link with libyk.a, libc.a and crt0.o") }, \
151 N_("Link with libmvme.a, libc.a and crt0.o") }, \
153 N_("Set the PPC_EMB bit in the ELF flags header") }, \
154 { "vxworks", 0, N_("no description yet") }, \
155 { "shlib", 0, N_("no description yet") }, \
156 EXTRA_SUBTARGET_SWITCHES \
157 { "newlib", 0, N_("no description yet") },
159 /* This is meant to be redefined in the host dependent files. */
160 #define EXTRA_SUBTARGET_SWITCHES
162 /* Sometimes certain combinations of command options do not make sense
163 on a particular target machine. You can define a macro
164 `OVERRIDE_OPTIONS' to take account of this. This macro, if
165 defined, is executed once just after all the command options have
168 The macro SUBTARGET_OVERRIDE_OPTIONS is provided for subtargets, to
171 #define SUBTARGET_OVERRIDE_OPTIONS \
174 g_switch_value = SDATA_DEFAULT_SIZE; \
176 if (!strcmp (rs6000_abi_name, "sysv")) \
177 rs6000_current_abi = ABI_V4; \
178 else if (!strcmp (rs6000_abi_name, "sysv-noeabi")) \
180 rs6000_current_abi = ABI_V4; \
181 target_flags &= ~ MASK_EABI; \
183 else if (!strcmp (rs6000_abi_name, "sysv-eabi") \
184 || !strcmp (rs6000_abi_name, "eabi")) \
186 rs6000_current_abi = ABI_V4; \
187 target_flags |= MASK_EABI; \
189 else if (!strcmp (rs6000_abi_name, "aix")) \
191 rs6000_current_abi = ABI_AIX_NODESC; \
192 target_flags |= MASK_EABI; \
194 else if (!strcmp (rs6000_abi_name, "aixdesc")) \
195 rs6000_current_abi = ABI_AIX; \
196 else if (!strcmp (rs6000_abi_name, "freebsd")) \
197 rs6000_current_abi = ABI_V4; \
198 else if (!strcmp (rs6000_abi_name, "linux")) \
199 rs6000_current_abi = ABI_V4; \
200 else if (!strcmp (rs6000_abi_name, "gnu")) \
201 rs6000_current_abi = ABI_V4; \
202 else if (!strcmp (rs6000_abi_name, "netbsd")) \
203 rs6000_current_abi = ABI_V4; \
204 else if (!strcmp (rs6000_abi_name, "i960-old")) \
206 rs6000_current_abi = ABI_V4; \
207 target_flags |= (MASK_LITTLE_ENDIAN | MASK_EABI \
208 | MASK_NO_BITFIELD_WORD); \
209 target_flags &= ~MASK_STRICT_ALIGN; \
213 rs6000_current_abi = ABI_V4; \
214 error ("bad value for -mcall-%s", rs6000_abi_name); \
217 if (rs6000_sdata_name) \
219 if (!strcmp (rs6000_sdata_name, "none")) \
220 rs6000_sdata = SDATA_NONE; \
221 else if (!strcmp (rs6000_sdata_name, "data")) \
222 rs6000_sdata = SDATA_DATA; \
223 else if (!strcmp (rs6000_sdata_name, "default")) \
224 rs6000_sdata = (TARGET_EABI) ? SDATA_EABI : SDATA_SYSV; \
225 else if (!strcmp (rs6000_sdata_name, "sysv")) \
226 rs6000_sdata = SDATA_SYSV; \
227 else if (!strcmp (rs6000_sdata_name, "eabi")) \
228 rs6000_sdata = SDATA_EABI; \
230 error ("bad value for -msdata=%s", rs6000_sdata_name); \
232 else if (DEFAULT_ABI == ABI_V4) \
234 rs6000_sdata = SDATA_DATA; \
235 rs6000_sdata_name = "data"; \
239 rs6000_sdata = SDATA_NONE; \
240 rs6000_sdata_name = "none"; \
243 if (TARGET_RELOCATABLE && \
244 (rs6000_sdata == SDATA_EABI || rs6000_sdata == SDATA_SYSV)) \
246 rs6000_sdata = SDATA_DATA; \
247 error ("-mrelocatable and -msdata=%s are incompatible", \
248 rs6000_sdata_name); \
251 else if (flag_pic && \
252 (rs6000_sdata == SDATA_EABI || rs6000_sdata == SDATA_SYSV)) \
254 rs6000_sdata = SDATA_DATA; \
255 error ("-f%s and -msdata=%s are incompatible", \
256 (flag_pic > 1) ? "PIC" : "pic", \
257 rs6000_sdata_name); \
260 if (rs6000_sdata != SDATA_NONE && DEFAULT_ABI != ABI_V4) \
262 rs6000_sdata = SDATA_NONE; \
263 error ("-msdata=%s and -mcall-%s are incompatible", \
264 rs6000_sdata_name, rs6000_abi_name); \
267 if (TARGET_RELOCATABLE && !TARGET_MINIMAL_TOC) \
269 target_flags |= MASK_MINIMAL_TOC; \
270 error ("-mrelocatable and -mno-minimal-toc are incompatible"); \
273 if (TARGET_RELOCATABLE && rs6000_current_abi == ABI_AIX) \
275 target_flags &= ~MASK_RELOCATABLE; \
276 error ("-mrelocatable and -mcall-%s are incompatible", \
280 if (flag_pic > 1 && rs6000_current_abi == ABI_AIX) \
283 error ("-fPIC and -mcall-%s are incompatible", \
287 if (rs6000_current_abi == ABI_AIX && TARGET_LITTLE_ENDIAN) \
289 target_flags &= ~MASK_LITTLE_ENDIAN; \
290 error ("-mcall-aixdesc must be big endian"); \
293 /* Treat -fPIC the same as -mrelocatable. */ \
295 target_flags |= MASK_RELOCATABLE | MASK_MINIMAL_TOC | MASK_NO_FP_IN_TOC; \
297 else if (TARGET_RELOCATABLE) \
303 /* Override rs6000.h definition. */
304 #undef TARGET_DEFAULT
305 #define TARGET_DEFAULT (MASK_POWERPC | MASK_NEW_MNEMONICS)
307 /* Override rs6000.h definition. */
308 #undef PROCESSOR_DEFAULT
309 #define PROCESSOR_DEFAULT PROCESSOR_PPC750
312 /* System V.4 uses register 13 as a pointer to the small data area,
313 so it is not available to the normal user. */
316 /* Size of the V.4 varargs area if needed. */
317 /* Override rs6000.h definition. */
318 #undef RS6000_VARARGS_AREA
319 #define RS6000_VARARGS_AREA ((cfun->machine->sysv_varargs_p) ? RS6000_VARARGS_SIZE : 0)
321 /* Override default big endianism definitions in rs6000.h. */
322 #undef BYTES_BIG_ENDIAN
323 #undef WORDS_BIG_ENDIAN
324 #define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN)
325 #define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN)
327 /* Define this to set the endianness to use in libgcc2.c, which can
328 not depend on target_flags. */
329 #if !defined(_LITTLE_ENDIAN) && !defined(__sun__)
330 #define LIBGCC2_WORDS_BIG_ENDIAN 1
332 #define LIBGCC2_WORDS_BIG_ENDIAN 0
335 /* Define cutoff for using external functions to save floating point.
336 Currently on V.4, always use inline stores. */
337 #define FP_SAVE_INLINE(FIRST_REG) ((FIRST_REG) < 64)
339 /* Put jump tables in read-only memory, rather than in .text. */
340 #define JUMP_TABLES_IN_TEXT_SECTION 0
342 /* Prefix and suffix to use to saving floating point. */
343 #define SAVE_FP_PREFIX "_savefpr_"
344 #define SAVE_FP_SUFFIX "_l"
346 /* Prefix and suffix to use to restoring floating point. */
347 #define RESTORE_FP_PREFIX "_restfpr_"
348 #define RESTORE_FP_SUFFIX "_l"
350 /* Type used for ptrdiff_t, as a string used in a declaration. */
351 #define PTRDIFF_TYPE "int"
353 /* Type used for wchar_t, as a string used in a declaration. */
354 /* Override svr4.h definition. */
356 #define WCHAR_TYPE "long int"
358 /* Width of wchar_t in bits. */
359 /* Override svr4.h definition. */
360 #undef WCHAR_TYPE_SIZE
361 #define WCHAR_TYPE_SIZE 32
363 /* Make int foo : 8 not cause structures to be aligned to an int boundary. */
364 /* Override elfos.h definition. */
365 #undef PCC_BITFIELD_TYPE_MATTERS
366 #define PCC_BITFIELD_TYPE_MATTERS (TARGET_BITFIELD_TYPE)
368 #undef BITFIELD_NBYTES_LIMITED
369 #define BITFIELD_NBYTES_LIMITED (TARGET_NO_BITFIELD_WORD)
371 /* Define this macro to be the value 1 if instructions will fail to
372 work if given data not on the nominal alignment. If instructions
373 will merely go slower in that case, define this macro as 0. */
374 #undef STRICT_ALIGNMENT
375 #define STRICT_ALIGNMENT (TARGET_STRICT_ALIGN)
377 /* Alignment in bits of the stack boundary. Note, in order to allow building
378 one set of libraries with -mno-eabi instead of eabi libraries and non-eabi
379 versions, just use 64 as the stack boundary. */
380 #undef STACK_BOUNDARY
381 #define STACK_BOUNDARY (TARGET_ALTIVEC_ABI ? 128 : 64)
383 /* Real stack boundary as mandated by the appropriate ABI. */
384 #define ABI_STACK_BOUNDARY ((TARGET_EABI && !TARGET_ALTIVEC_ABI) ? 64 : 128)
386 /* No data type wants to be aligned rounder than this. */
387 #undef BIGGEST_ALIGNMENT
388 #define BIGGEST_ALIGNMENT (TARGET_EABI ? 64 : 128)
390 /* An expression for the alignment of a structure field FIELD if the
391 alignment computed in the usual way is COMPUTED. */
392 #define ADJUST_FIELD_ALIGN(FIELD, COMPUTED) \
393 ((TARGET_ALTIVEC && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE) \
396 /* Define this macro as an expression for the alignment of a type
397 (given by TYPE as a tree node) if the alignment computed in the
398 usual way is COMPUTED and the alignment explicitly specified was
400 #define ROUND_TYPE_ALIGN(TYPE, COMPUTED, SPECIFIED) \
401 ((TARGET_ALTIVEC && TREE_CODE (TYPE) == VECTOR_TYPE) \
402 ? MAX (MAX ((COMPUTED), (SPECIFIED)), 128) \
403 : MAX (COMPUTED, SPECIFIED))
405 #undef BIGGEST_FIELD_ALIGNMENT
406 #undef ADJUST_FIELD_ALIGN
408 /* Use ELF style section commands. */
410 #define TEXT_SECTION_ASM_OP "\t.section\t\".text\""
412 #define DATA_SECTION_ASM_OP "\t.section\t\".data\""
414 #define BSS_SECTION_ASM_OP "\t.section\t\".bss\""
416 /* Override elfos.h definition. */
417 #undef INIT_SECTION_ASM_OP
418 #define INIT_SECTION_ASM_OP "\t.section\t\".init\",\"ax\""
420 /* Override elfos.h definition. */
421 #undef FINI_SECTION_ASM_OP
422 #define FINI_SECTION_ASM_OP "\t.section\t\".fini\",\"ax\""
424 #define TOC_SECTION_ASM_OP "\t.section\t\".got\",\"aw\""
426 /* Put PC relative got entries in .got2. */
427 #define MINIMAL_TOC_SECTION_ASM_OP \
428 ((TARGET_RELOCATABLE || flag_pic) ? "\t.section\t\".got2\",\"aw\"" : "\t.section\t\".got1\",\"aw\"")
430 #define SDATA_SECTION_ASM_OP "\t.section\t\".sdata\",\"aw\""
431 #define SDATA2_SECTION_ASM_OP "\t.section\t\".sdata2\",\"a\""
432 #define SBSS_SECTION_ASM_OP "\t.section\t\".sbss\",\"aw\",@nobits"
434 /* Besides the usual ELF sections, we need a toc section. */
435 /* Override elfos.h definition. */
436 #undef EXTRA_SECTIONS
437 #define EXTRA_SECTIONS in_const, in_toc, in_sdata, in_sdata2, in_sbss, in_init, in_fini
439 /* Override elfos.h definition. */
440 #undef EXTRA_SECTION_FUNCTIONS
441 #define EXTRA_SECTION_FUNCTIONS \
442 CONST_SECTION_FUNCTION \
443 TOC_SECTION_FUNCTION \
444 SDATA_SECTION_FUNCTION \
445 SDATA2_SECTION_FUNCTION \
446 SBSS_SECTION_FUNCTION \
447 INIT_SECTION_FUNCTION \
448 FINI_SECTION_FUNCTION
450 #define TOC_SECTION_FUNCTION \
454 if (in_section != in_toc) \
456 in_section = in_toc; \
457 if (DEFAULT_ABI == ABI_AIX \
458 && TARGET_MINIMAL_TOC \
459 && !TARGET_RELOCATABLE) \
461 if (! toc_initialized) \
463 toc_initialized = 1; \
464 fprintf (asm_out_file, "%s\n", TOC_SECTION_ASM_OP); \
465 ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LCTOC", 0); \
466 fprintf (asm_out_file, "\t.tc "); \
467 ASM_OUTPUT_INTERNAL_LABEL_PREFIX (asm_out_file, "LCTOC1[TC],"); \
468 ASM_OUTPUT_INTERNAL_LABEL_PREFIX (asm_out_file, "LCTOC1"); \
469 fprintf (asm_out_file, "\n"); \
471 fprintf (asm_out_file, "%s\n", MINIMAL_TOC_SECTION_ASM_OP); \
472 ASM_OUTPUT_INTERNAL_LABEL_PREFIX (asm_out_file, "LCTOC1"); \
473 fprintf (asm_out_file, " = .+32768\n"); \
476 fprintf (asm_out_file, "%s\n", MINIMAL_TOC_SECTION_ASM_OP); \
478 else if (DEFAULT_ABI == ABI_AIX && !TARGET_RELOCATABLE) \
479 fprintf (asm_out_file, "%s\n", TOC_SECTION_ASM_OP); \
482 fprintf (asm_out_file, "%s\n", MINIMAL_TOC_SECTION_ASM_OP); \
483 if (! toc_initialized) \
485 ASM_OUTPUT_INTERNAL_LABEL_PREFIX (asm_out_file, "LCTOC1"); \
486 fprintf (asm_out_file, " = .+32768\n"); \
487 toc_initialized = 1; \
493 extern int in_toc_section PARAMS ((void)); \
494 int in_toc_section () \
496 return in_section == in_toc; \
499 #define SDATA_SECTION_FUNCTION \
503 if (in_section != in_sdata) \
505 in_section = in_sdata; \
506 fprintf (asm_out_file, "%s\n", SDATA_SECTION_ASM_OP); \
510 #define SDATA2_SECTION_FUNCTION \
514 if (in_section != in_sdata2) \
516 in_section = in_sdata2; \
517 fprintf (asm_out_file, "%s\n", SDATA2_SECTION_ASM_OP); \
521 #define SBSS_SECTION_FUNCTION \
525 if (in_section != in_sbss) \
527 in_section = in_sbss; \
528 fprintf (asm_out_file, "%s\n", SBSS_SECTION_ASM_OP); \
532 #define INIT_SECTION_FUNCTION \
536 if (in_section != in_init) \
538 in_section = in_init; \
539 fprintf (asm_out_file, "%s\n", INIT_SECTION_ASM_OP); \
543 #define FINI_SECTION_FUNCTION \
547 if (in_section != in_fini) \
549 in_section = in_fini; \
550 fprintf (asm_out_file, "%s\n", FINI_SECTION_ASM_OP); \
554 /* A C statement or statements to switch to the appropriate section
555 for output of RTX in mode MODE. You can assume that RTX is some
556 kind of constant in RTL. The argument MODE is redundant except in
557 the case of a `const_int' rtx. Select the section by calling
558 `text_section' or one of the alternatives for other sections.
560 Do not define this macro if you put all constants in the read-only
563 /* Override elfos.h definition. */
564 #undef SELECT_RTX_SECTION
565 #define SELECT_RTX_SECTION(MODE, X, ALIGN) rs6000_select_rtx_section (MODE, X)
567 /* A C statement or statements to switch to the appropriate
568 section for output of DECL. DECL is either a `VAR_DECL' node
569 or a constant of some sort. RELOC indicates whether forming
570 the initial value of DECL requires link-time relocations. */
572 /* Override elfos.h definition. */
573 #undef SELECT_SECTION
574 #define SELECT_SECTION(DECL, RELOC, ALIGN) rs6000_select_section (DECL, RELOC)
576 /* A C statement to build up a unique section name, expressed as a
577 STRING_CST node, and assign it to DECL_SECTION_NAME (decl).
578 RELOC indicates whether the initial value of EXP requires
579 link-time relocations. If you do not define this macro, GCC will use
580 the symbol name prefixed by `.' as the section name. Note - this
581 macro can now be called for uninitialized data items as well as
582 initialised data and functions. */
584 /* Override elfos.h definition. */
585 #undef UNIQUE_SECTION
586 #define UNIQUE_SECTION(DECL, RELOC) rs6000_unique_section (DECL, RELOC)
588 /* Return non-zero if this entry is to be written into the constant pool
589 in a special way. We do so if this is a SYMBOL_REF, LABEL_REF or a CONST
590 containing one of them. If -mfp-in-toc (the default), we also do
591 this for floating-point constants. We actually can only do this
592 if the FP formats of the target and host machines are the same, but
593 we can't check that since not every file that uses
594 GO_IF_LEGITIMATE_ADDRESS_P includes real.h.
596 Unlike AIX, we don't key off of -mminimal-toc, but instead do not
597 allow floating point constants in the TOC if -mrelocatable. */
599 #undef ASM_OUTPUT_SPECIAL_POOL_ENTRY_P
600 #define ASM_OUTPUT_SPECIAL_POOL_ENTRY_P(X, MODE) \
602 && (GET_CODE (X) == SYMBOL_REF \
603 || (GET_CODE (X) == CONST && GET_CODE (XEXP (X, 0)) == PLUS \
604 && GET_CODE (XEXP (XEXP (X, 0), 0)) == SYMBOL_REF) \
605 || GET_CODE (X) == LABEL_REF \
606 || (GET_CODE (X) == CONST_INT \
607 && GET_MODE_BITSIZE (MODE) <= GET_MODE_BITSIZE (Pmode)) \
608 || (!TARGET_NO_FP_IN_TOC \
609 && !TARGET_RELOCATABLE \
610 && GET_CODE (X) == CONST_DOUBLE \
611 && GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \
612 && BITS_PER_WORD == HOST_BITS_PER_INT)))
614 /* These macros generate the special .type and .size directives which
615 are used to set the corresponding fields of the linker symbol table
616 entries in an ELF object file under SVR4. These macros also output
617 the starting labels for the relevant functions/objects. */
619 /* Write the extra assembler code needed to declare a function properly.
620 Some svr4 assemblers need to also have something extra said about the
621 function's return value. We allow for that here. */
623 extern int rs6000_pic_labelno;
625 /* Override elfos.h definition. */
626 #undef ASM_DECLARE_FUNCTION_NAME
627 #define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \
629 const char *const init_ptr = (TARGET_64BIT) ? ".quad" : ".long"; \
631 if (TARGET_RELOCATABLE \
632 && (get_pool_size () != 0 || current_function_profile) \
637 ASM_OUTPUT_INTERNAL_LABEL (FILE, "LCL", rs6000_pic_labelno); \
639 ASM_GENERATE_INTERNAL_LABEL (buf, "LCTOC", 1); \
640 fprintf (FILE, "\t%s ", init_ptr); \
641 assemble_name (FILE, buf); \
643 ASM_GENERATE_INTERNAL_LABEL (buf, "LCF", rs6000_pic_labelno); \
644 assemble_name (FILE, buf); \
648 fprintf (FILE, "%s", TYPE_ASM_OP); \
649 assemble_name (FILE, NAME); \
651 fprintf (FILE, TYPE_OPERAND_FMT, "function"); \
653 ASM_DECLARE_RESULT (FILE, DECL_RESULT (DECL)); \
655 if (DEFAULT_ABI == ABI_AIX) \
657 const char *desc_name, *orig_name; \
659 STRIP_NAME_ENCODING (orig_name, NAME); \
660 desc_name = orig_name; \
661 while (*desc_name == '.') \
664 if (TREE_PUBLIC (DECL)) \
665 fprintf (FILE, "\t.globl %s\n", desc_name); \
667 fprintf (FILE, "%s\n", MINIMAL_TOC_SECTION_ASM_OP); \
668 fprintf (FILE, "%s:\n", desc_name); \
669 fprintf (FILE, "\t%s %s\n", init_ptr, orig_name); \
670 fprintf (FILE, "\t%s _GLOBAL_OFFSET_TABLE_\n", init_ptr); \
671 if (DEFAULT_ABI == ABI_AIX) \
672 fprintf (FILE, "\t%s 0\n", init_ptr); \
673 fprintf (FILE, "\t.previous\n"); \
675 ASM_OUTPUT_LABEL (FILE, NAME); \
678 /* A C compound statement that outputs the assembler code for a thunk function,
679 used to implement C++ virtual function calls with multiple inheritance. The
680 thunk acts as a wrapper around a virtual function, adjusting the implicit
681 object parameter before handing control off to the real function.
683 First, emit code to add the integer DELTA to the location that contains the
684 incoming first argument. Assume that this argument contains a pointer, and
685 is the one used to pass the this' pointer in C++. This is the incoming
686 argument *before* the function prologue, e.g. %o0' on a sparc. The
687 addition must preserve the values of all other incoming arguments.
689 After the addition, emit code to jump to FUNCTION, which is a
690 FUNCTION_DECL'. This is a direct pure jump, not a call, and does not touch
691 the return address. Hence returning from FUNCTION will return to whoever
692 called the current thunk'.
694 The effect must be as if FUNCTION had been called directly with the adjusted
695 first argument. This macro is responsible for emitting all of the code for
696 a thunk function; FUNCTION_PROLOGUE' and FUNCTION_EPILOGUE' are not
699 The THUNK_FNDECL is redundant. (DELTA and FUNCTION have already been
700 extracted from it.) It might possibly be useful on some targets, but
703 If you do not define this macro, the target-independent code in the C++
704 frontend will generate a less efficient heavyweight thunk that calls
705 FUNCTION instead of jumping to it. The generic approach does not support
708 #define ASM_OUTPUT_MI_THUNK(FILE, THUNK_FNDECL, DELTA, FUNCTION) \
709 output_mi_thunk (FILE, THUNK_FNDECL, DELTA, FUNCTION)
711 /* The USER_LABEL_PREFIX stuff is affected by the -fleading-underscore
712 flag. The LOCAL_LABEL_PREFIX variable is used by dbxelf.h. */
714 #define LOCAL_LABEL_PREFIX "."
715 #define USER_LABEL_PREFIX ""
717 /* svr4.h overrides ASM_OUTPUT_INTERNAL_LABEL. */
719 #define ASM_OUTPUT_INTERNAL_LABEL_PREFIX(FILE,PREFIX) \
720 asm_fprintf (FILE, "%L%s", PREFIX)
722 #define ASM_OUTPUT_LABEL(FILE,NAME) \
723 (assemble_name (FILE, NAME), fputs (":\n", FILE))
725 /* This is how to output a command to make the user-level label named NAME
726 defined for reference from other files. */
728 #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
729 do { fputs ("\t.globl ", FILE); \
730 assemble_name (FILE, NAME); putc ('\n', FILE);} while (0)
732 /* This says how to output assembler code to declare an
733 uninitialized internal linkage data object. Under SVR4,
734 the linker seems to want the alignment of data objects
735 to depend on their types. We do exactly that here. */
737 #define LOCAL_ASM_OP "\t.local\t"
739 #define LCOMM_ASM_OP "\t.lcomm\t"
741 /* Override elfos.h definition. */
742 #undef ASM_OUTPUT_ALIGNED_LOCAL
743 #define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \
745 if (rs6000_sdata != SDATA_NONE && (SIZE) > 0 \
746 && (SIZE) <= g_switch_value) \
749 ASM_OUTPUT_ALIGN (FILE, exact_log2 (ALIGN / BITS_PER_UNIT)); \
750 ASM_OUTPUT_LABEL (FILE, NAME); \
751 ASM_OUTPUT_SKIP (FILE, SIZE); \
752 if (!flag_inhibit_size_directive && (SIZE) > 0) \
754 fprintf (FILE, "%s", SIZE_ASM_OP); \
755 assemble_name (FILE, NAME); \
756 fprintf (FILE, ",%d\n", SIZE); \
761 fprintf (FILE, "%s", LCOMM_ASM_OP); \
762 assemble_name ((FILE), (NAME)); \
763 fprintf ((FILE), ",%u,%u\n", (SIZE), (ALIGN) / BITS_PER_UNIT); \
767 /* Describe how to emit uninitialized external linkage items. */
768 #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
770 ASM_GLOBALIZE_LABEL (FILE, NAME); \
771 ASM_OUTPUT_ALIGNED_LOCAL (FILE, NAME, SIZE, ALIGN); \
774 /* Switch Recognition by gcc.c. Add -G xx support. */
776 /* Override svr4.h definition. */
777 #undef SWITCH_TAKES_ARG
778 #define SWITCH_TAKES_ARG(CHAR) \
779 ((CHAR) == 'D' || (CHAR) == 'U' || (CHAR) == 'o' \
780 || (CHAR) == 'e' || (CHAR) == 'T' || (CHAR) == 'u' \
781 || (CHAR) == 'I' || (CHAR) == 'm' || (CHAR) == 'x' \
782 || (CHAR) == 'L' || (CHAR) == 'A' || (CHAR) == 'V' \
783 || (CHAR) == 'B' || (CHAR) == 'b' || (CHAR) == 'G')
786 /* Override elfos.h definition. */
787 #undef ASM_FILE_START
788 #define ASM_FILE_START(FILE) \
790 output_file_directive ((FILE), main_input_filename); \
791 rs6000_file_start (FILE, TARGET_CPU_DEFAULT); \
795 extern int fixuplabelno;
797 /* Handle constructors specially for -mrelocatable. */
798 #define TARGET_ASM_CONSTRUCTOR rs6000_elf_asm_out_constructor
799 #define TARGET_ASM_DESTRUCTOR rs6000_elf_asm_out_destructor
801 /* This is the end of what might become sysv4.h. */
803 /* Use DWARF 2 debugging information by default. */
804 #undef PREFERRED_DEBUGGING_TYPE
805 #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
807 /* Historically we have also supported stabs debugging. */
808 #define DBX_DEBUGGING_INFO
810 /* If we are referencing a function that is static or is known to be
811 in this file, make the SYMBOL_REF special. We can use this to indicate
812 that we can branch to this function without emitting a no-op after the
813 call. For real AIX calling sequences, we also replace the
814 function name with the real name (1 or 2 leading .'s), rather than
815 the function descriptor name. This saves a lot of overriding code
816 to read the prefixes. */
818 #undef ENCODE_SECTION_INFO
819 #define ENCODE_SECTION_INFO(DECL, FIRST) \
820 rs6000_encode_section_info (DECL, FIRST)
822 /* The ELF version doesn't encode [DS] or whatever at the end of symbols. */
824 #define RS6000_OUTPUT_BASENAME(FILE, NAME) \
825 assemble_name (FILE, NAME)
827 /* This macro gets just the user-specified name
828 out of the string in a SYMBOL_REF. Discard
830 #define STRIP_NAME_ENCODING(VAR,SYMBOL_NAME) \
832 const char *_name = SYMBOL_NAME; \
833 while (*_name == '*' || *_name == '@') \
838 /* This is how to output a reference to a user-level label named NAME.
839 `assemble_name' uses this. */
841 /* Override elfos.h definition. */
842 #undef ASM_OUTPUT_LABELREF
843 #define ASM_OUTPUT_LABELREF(FILE,NAME) \
845 const char *_name = NAME; \
850 fprintf (FILE, "%s", _name + 1); \
852 asm_fprintf (FILE, "%U%s", _name); \
855 /* But, to make this work, we have to output the stabs for the function
858 #define DBX_FUNCTION_FIRST
860 /* This is the end of what might become sysv4dbx.h. */
862 #ifndef TARGET_VERSION
863 #define TARGET_VERSION fprintf (stderr, " (PowerPC System V.4)");
866 #ifndef CPP_PREDEFINES
867 #define CPP_PREDEFINES \
868 "-DPPC -Dunix -D__svr4__ -Asystem=unix -Asystem=svr4 -Acpu=powerpc -Amachine=powerpc"
871 /* Pass various options to the assembler. */
872 /* Override svr4.h definition. */
874 #define ASM_SPEC "%(asm_cpu) \
875 %{.s: %{mregnames} %{mno-regnames}} %{.S: %{mregnames} %{mno-regnames}} \
876 %{v:-V} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*} \
877 %{mrelocatable} %{mrelocatable-lib} %{fpic:-K PIC} %{fPIC:-K PIC} \
878 %{memb} %{!memb: %{msdata: -memb} %{msdata=eabi: -memb}} \
879 %{mlittle} %{mlittle-endian} %{mbig} %{mbig-endian} \
880 %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
881 %{mcall-freebsd: -mbig} \
882 %{mcall-i960-old: -mlittle} \
883 %{mcall-linux: -mbig} \
884 %{mcall-gnu: -mbig} \
885 %{mcall-netbsd: -mbig} \
888 #define CC1_ENDIAN_BIG_SPEC ""
890 #define CC1_ENDIAN_LITTLE_SPEC "\
891 %{!mstrict-align: %{!mno-strict-align: \
897 #define CC1_ENDIAN_DEFAULT_SPEC "%(cc1_endian_big)"
899 /* Pass -G xxx to the compiler and set correct endian mode. */
900 #define CC1_SPEC "%{G*} \
901 %{mlittle: %(cc1_endian_little)} %{!mlittle: %{mlittle-endian: %(cc1_endian_little)}} \
902 %{mbig: %(cc1_endian_big)} %{!mbig: %{mbig-endian: %(cc1_endian_big)}} \
903 %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
904 %{mcall-aixdesc: -mbig %(cc1_endian_big) } \
905 %{mcall-freebsd: -mbig %(cc1_endian_big) } \
906 %{mcall-i960-old: -mlittle %(cc1_endian_little) } \
907 %{mcall-linux: -mbig %(cc1_endian_big) } \
908 %{mcall-gnu: -mbig %(cc1_endian_big) } \
909 %{mcall-netbsd: -mbig %(cc1_endian_big) } \
910 %{!mcall-aixdesc: %{!mcall-freebsd: %{!mcall-i960-old: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: \
911 %(cc1_endian_default) \
914 %{mno-sdata: -msdata=none } \
915 %{meabi: %{!mcall-*: -mcall-sysv }} \
916 %{!meabi: %{!mno-eabi: \
917 %{mrelocatable: -meabi } \
918 %{mcall-freebsd: -mno-eabi } \
919 %{mcall-i960-old: -meabi } \
920 %{mcall-linux: -mno-eabi } \
921 %{mcall-gnu: -mno-eabi } \
922 %{mcall-netbsd: -mno-eabi }}} \
923 %{msdata: -msdata=default} \
924 %{mno-sdata: -msdata=none} \
927 /* Don't put -Y P,<path> for cross compilers. */
928 #ifndef CROSS_COMPILE
929 #define LINK_PATH_SPEC "\
931 %{!nostdlib: %{!YP,*: \
933 %{p:-Y P,/usr/ucblib:/usr/ccs/lib/libp:/usr/lib/libp:/usr/ccs/lib:/usr/lib} \
934 %{!p:-Y P,/usr/ucblib:/usr/ccs/lib:/usr/lib}} \
935 %{!R*: %{!L*: -R /usr/ucblib}} \
937 %{p:-Y P,/usr/ccs/lib/libp:/usr/lib/libp:/usr/ccs/lib:/usr/lib} \
938 %{!p:-Y P,/usr/ccs/lib:/usr/lib}}}}"
941 #define LINK_PATH_SPEC ""
944 /* Default starting address if specified. */
945 #define LINK_START_SPEC "\
946 %{mads: %(link_start_ads) } \
947 %{myellowknife: %(link_start_yellowknife) } \
948 %{mmvme: %(link_start_mvme) } \
949 %{msim: %(link_start_sim) } \
950 %{mcall-freebsd: %(link_start_freebsd) } \
951 %{mcall-linux: %(link_start_linux) } \
952 %{mcall-gnu: %(link_start_gnu) } \
953 %{mcall-netbsd: %(link_start_netbsd) } \
954 %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mcall-linux: %{!mcall-gnu: \
955 %{!mcall-netbsd: %{!mcall-freebsd: %(link_start_default) }}}}}}}}"
957 #define LINK_START_DEFAULT_SPEC ""
959 /* Override svr4.h definition. */
962 %{h*} %{v:-V} %{!msdata=none:%{G*}} %{msdata=none:-G0} \
966 %{!Wl,-T*: %{!T*: %(link_start) }} \
970 /* For now, turn off shared libraries by default. */
971 #ifndef SHARED_LIB_SUPPORT
972 #define NO_SHARED_LIB_SUPPORT
975 #ifndef NO_SHARED_LIB_SUPPORT
976 /* Shared libraries are default. */
977 #define LINK_SHLIB_SPEC "\
978 %{!static: %(link_path) %{!R*:%{L*:-R %*}}} \
980 %{static:-dn -Bstatic} \
981 %{shared:-G -dy -z text} \
982 %{symbolic:-Bsymbolic -G -dy -z text}"
985 /* Shared libraries are not default. */
986 #define LINK_SHLIB_SPEC "\
987 %{mshlib: %(link_path) } \
988 %{!mshlib: %{!shared: %{!symbolic: -dn -Bstatic}}} \
990 %{shared:-G -dy -z text %(link_path) } \
991 %{symbolic:-Bsymbolic -G -dy -z text %(link_path) }"
994 /* Override the default target of the linker. */
995 #define LINK_TARGET_SPEC "\
996 %{mlittle: --oformat elf32-powerpcle } %{mlittle-endian: --oformat elf32-powerpcle } \
997 %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
998 %{mcall-i960-old: --oformat elf32-powerpcle} \
1001 /* Any specific OS flags. */
1002 #define LINK_OS_SPEC "\
1003 %{mads: %(link_os_ads) } \
1004 %{myellowknife: %(link_os_yellowknife) } \
1005 %{mmvme: %(link_os_mvme) } \
1006 %{msim: %(link_os_sim) } \
1007 %{mcall-freebsd: %(link_os_freebsd) } \
1008 %{mcall-linux: %(link_os_linux) } \
1009 %{mcall-gnu: %(link_os_gnu) } \
1010 %{mcall-netbsd: %(link_os_netbsd) } \
1011 %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(link_os_default) }}}}}}}}"
1013 #define LINK_OS_DEFAULT_SPEC ""
1015 #define CPP_SYSV_SPEC \
1016 "%{mrelocatable*: -D_RELOCATABLE} \
1017 %{fpic: -D__PIC__=1 -D__pic__=1} \
1018 %{!fpic: %{fPIC: -D__PIC__=2 -D__pic__=2}} \
1019 %{mlong-double-128: -D__LONG_DOUBLE_128__=1} \
1020 %{!mlong-double-64: %(cpp_longdouble_default)} \
1021 %{mcall-sysv: -D_CALL_SYSV} \
1022 %{mcall-aix: -D_CALL_AIX} %{mcall-aixdesc: -D_CALL_AIX -D_CALL_AIXDESC} \
1023 %{!mcall-sysv: %{!mcall-aix: %{!mcall-aixdesc: %(cpp_sysv_default) }}} \
1024 %{msoft-float: -D_SOFT_FLOAT} \
1025 %{!msoft-float: %{!mhard-float: \
1026 %{mcpu=401: -D_SOFT_FLOAT} \
1027 %{mcpu=403: -D_SOFT_FLOAT} \
1028 %{mcpu=405: -D_SOFT_FLOAT} \
1029 %{mcpu=ec603e: -D_SOFT_FLOAT} \
1030 %{mcpu=801: -D_SOFT_FLOAT} \
1031 %{mcpu=821: -D_SOFT_FLOAT} \
1032 %{mcpu=823: -D_SOFT_FLOAT} \
1033 %{mcpu=860: -D_SOFT_FLOAT} \
1034 %{!mcpu*: %(cpp_float_default) }}}"
1036 /* Whether floating point is disabled by default. */
1037 #define CPP_FLOAT_DEFAULT_SPEC ""
1039 /* Whether 'long double' is 128 bits by default. */
1040 #define CPP_LONGDOUBLE_DEFAULT_SPEC ""
1042 #define CPP_SYSV_DEFAULT_SPEC "-D_CALL_SYSV"
1044 #define CPP_ENDIAN_BIG_SPEC "-D_BIG_ENDIAN -D__BIG_ENDIAN__ -Amachine=bigendian"
1046 #define CPP_ENDIAN_LITTLE_SPEC "-D_LITTLE_ENDIAN -D__LITTLE_ENDIAN__ -Amachine=littleendian"
1048 #define CPP_ENDIAN_SPEC \
1049 "%{mlittle: %(cpp_endian_little) } \
1050 %{mlittle-endian: %(cpp_endian_little) } \
1051 %{mbig: %(cpp_endian_big) } \
1052 %{mbig-endian: %(cpp_endian_big) } \
1053 %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
1054 %{mcall-freebsd: %(cpp_endian_big) } \
1055 %{mcall-linux: %(cpp_endian_big) } \
1056 %{mcall-gnu: %(cpp_endian_big) } \
1057 %{mcall-netbsd: %(cpp_endian_big) } \
1058 %{mcall-i960-old: %(cpp_endian_little) } \
1059 %{mcall-aixdesc: %(cpp_endian_big) } \
1060 %{!mcall-linux: %{!mcall-gnu: %{!mcall-freebsd: %{!mcall-netbsd: %{!mcall-aixdesc: %(cpp_endian_default) }}}}}}}}}"
1062 #define CPP_ENDIAN_DEFAULT_SPEC "%(cpp_endian_big)"
1064 /* Override rs6000.h definition. */
1066 #define CPP_SPEC "%{posix: -D_POSIX_SOURCE} %(cpp_sysv) %(cpp_endian) %(cpp_cpu) \
1067 %{mads: %(cpp_os_ads) } \
1068 %{myellowknife: %(cpp_os_yellowknife) } \
1069 %{mmvme: %(cpp_os_mvme) } \
1070 %{msim: %(cpp_os_sim) } \
1071 %{mcall-freebsd: %(cpp_os_freebsd) } \
1072 %{mcall-linux: %(cpp_os_linux) } \
1073 %{mcall-gnu: %(cpp_os_gnu) } \
1074 %{mcall-netbsd: %(cpp_os_netbsd) } \
1075 %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(cpp_os_default) }}}}}}}}"
1077 #define CPP_OS_DEFAULT_SPEC ""
1079 /* Override svr4.h definition. */
1080 #undef STARTFILE_SPEC
1081 #define STARTFILE_SPEC "\
1082 %{mads: %(startfile_ads) } \
1083 %{myellowknife: %(startfile_yellowknife) } \
1084 %{mmvme: %(startfile_mvme) } \
1085 %{msim: %(startfile_sim) } \
1086 %{mcall-freebsd: %(startfile_freebsd) } \
1087 %{mcall-linux: %(startfile_linux) } \
1088 %{mcall-gnu: %(startfile_gnu) } \
1089 %{mcall-netbsd: %(startfile_netbsd) } \
1090 %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(startfile_default) }}}}}}}}"
1092 #define STARTFILE_DEFAULT_SPEC ""
1094 /* Override svr4.h definition. */
1097 %{mads: %(lib_ads) } \
1098 %{myellowknife: %(lib_yellowknife) } \
1099 %{mmvme: %(lib_mvme) } \
1100 %{msim: %(lib_sim) } \
1101 %{mcall-freebsd: %(lib_freebsd) } \
1102 %{mcall-linux: %(lib_linux) } \
1103 %{mcall-gnu: %(lib_gnu) } \
1104 %{mcall-netbsd: %(lib_netbsd) } \
1105 %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(lib_default) }}}}}}}}"
1107 #define LIB_DEFAULT_SPEC ""
1109 /* Override svr4.h definition. */
1111 #define ENDFILE_SPEC "crtsavres.o%s \
1112 %{mads: %(endfile_ads)} \
1113 %{myellowknife: %(endfile_yellowknife)} \
1114 %{mmvme: %(endfile_mvme)} \
1115 %{msim: %(endfile_sim)} \
1116 %{mcall-freebsd: %(endfile_freebsd) } \
1117 %{mcall-linux: %(endfile_linux) } \
1118 %{mcall-gnu: %(endfile_gnu) } \
1119 %{mcall-netbsd: %(endfile_netbsd) } \
1120 %{mvxworks: %(endfile_vxworks) } \
1121 %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %{!mvxworks: %(endfile_default) }}}}}}}}}"
1123 #define ENDFILE_DEFAULT_SPEC ""
1125 /* Motorola ADS support. */
1126 #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
1128 #define STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
1130 #define ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
1132 #define LINK_START_ADS_SPEC "-T ads.ld%s"
1134 #define LINK_OS_ADS_SPEC ""
1136 #define CPP_OS_ADS_SPEC ""
1138 /* Motorola Yellowknife support. */
1139 #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
1141 #define STARTFILE_YELLOWKNIFE_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
1143 #define ENDFILE_YELLOWKNIFE_SPEC "crtend.o%s ecrtn.o%s"
1145 #define LINK_START_YELLOWKNIFE_SPEC "-T yellowknife.ld%s"
1147 #define LINK_OS_YELLOWKNIFE_SPEC ""
1149 #define CPP_OS_YELLOWKNIFE_SPEC ""
1151 /* Motorola MVME support. */
1152 #define LIB_MVME_SPEC "--start-group -lmvme -lc --end-group"
1154 #define STARTFILE_MVME_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
1156 #define ENDFILE_MVME_SPEC "crtend.o%s ecrtn.o%s"
1158 #define LINK_START_MVME_SPEC "-Ttext 0x40000"
1160 #define LINK_OS_MVME_SPEC ""
1162 #define CPP_OS_MVME_SPEC ""
1164 /* PowerPC simulator based on netbsd system calls support. */
1165 #define LIB_SIM_SPEC "--start-group -lsim -lc --end-group"
1167 #define STARTFILE_SIM_SPEC "ecrti.o%s sim-crt0.o%s crtbegin.o%s"
1169 #define ENDFILE_SIM_SPEC "crtend.o%s ecrtn.o%s"
1171 #define LINK_START_SIM_SPEC ""
1173 #define LINK_OS_SIM_SPEC "-m elf32ppcsim"
1175 #define CPP_OS_SIM_SPEC ""
1177 /* FreeBSD support. */
1179 #define CPP_OS_FREEBSD_SPEC "\
1180 -D__PPC__ -D__ppc__ -D__PowerPC__ -D__powerpc__ \
1181 -Acpu=powerpc -Amachine=powerpc"
1183 #define STARTFILE_FREEBSD_SPEC FBSD_STARTFILE_SPEC
1184 #define ENDFILE_FREEBSD_SPEC FBSD_ENDFILE_SPEC
1185 #define LIB_FREEBSD_SPEC FBSD_LIB_SPEC
1186 #define LINK_START_FREEBSD_SPEC ""
1188 #define LINK_OS_FREEBSD_SPEC "\
1189 %{symbolic:-Bsymbolic}"
1191 /* GNU/Linux support. */
1192 #ifdef USE_GNULIBC_1
1193 #define LIB_LINUX_SPEC "%{mnewlib: --start-group -llinux -lc --end-group } \
1196 #define LIB_LINUX_SPEC "%{mnewlib: --start-group -llinux -lc --end-group } \
1197 %{!mnewlib: %{shared:-lc} %{!shared: %{pthread:-lpthread } \
1198 %{profile:-lc_p} %{!profile:-lc}}}"
1201 #ifdef USE_GNULIBC_1
1202 #define STARTFILE_LINUX_SPEC "\
1203 %{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}} \
1204 %{mnewlib: ecrti.o%s} %{!mnewlib: crti.o%s} \
1205 %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
1207 #define STARTFILE_LINUX_SPEC "\
1208 %{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}} \
1209 %{mnewlib: ecrti.o%s} %{!mnewlib: crti.o%s} \
1210 %{static:crtbeginT.o%s} \
1211 %{!static:%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}}"
1214 #define ENDFILE_LINUX_SPEC "%{!shared:crtend.o%s} %{shared:crtendS.o%s} \
1215 %{mnewlib: ecrtn.o%s} %{!mnewlib: crtn.o%s}"
1217 #define LINK_START_LINUX_SPEC ""
1219 #define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \
1220 %{rdynamic:-export-dynamic} \
1221 %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}}}"
1223 #if !defined(USE_GNULIBC_1) && defined(HAVE_LD_EH_FRAME_HDR)
1224 # define LINK_EH_SPEC "%{!static:--eh-frame-hdr} "
1227 #ifdef USE_GNULIBC_1
1228 #define CPP_OS_LINUX_SPEC "-D__unix__ -D__linux__ \
1231 %{!std=*:-Dunix -D__unix -Dlinux -D__linux} \
1232 %{std=gnu*:-Dunix -D__unix -Dlinux -D__linux}}} \
1233 -Asystem=unix -Asystem=posix"
1235 #define CPP_OS_LINUX_SPEC "-D__unix__ -D__linux__ \
1238 %{!std=*:-Dunix -D__unix -Dlinux -D__linux} \
1239 %{std=gnu*:-Dunix -D__unix -Dlinux -D__linux}}} \
1240 -Asystem=unix -Asystem=posix %{pthread:-D_REENTRANT}"
1243 /* GNU/Hurd support. */
1244 #define LIB_GNU_SPEC "%{mnewlib: --start-group -lgnu -lc --end-group } \
1245 %{!mnewlib: %{shared:-lc} %{!shared: %{pthread:-lpthread } \
1246 %{profile:-lc_p} %{!profile:-lc}}}"
1248 #define STARTFILE_GNU_SPEC "\
1249 %{!shared: %{!static: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}}} \
1250 %{static: %{pg:gcrt0.o%s} %{!pg:%{p:gcrt0.o%s} %{!p:crt0.o%s}}} \
1251 %{mnewlib: ecrti.o%s} %{!mnewlib: crti.o%s} \
1252 %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
1254 #define ENDFILE_GNU_SPEC "%{!shared:crtend.o%s} %{shared:crtendS.o%s} \
1255 %{mnewlib: ecrtn.o%s} %{!mnewlib: crtn.o%s}"
1257 #define LINK_START_GNU_SPEC ""
1259 #define LINK_OS_GNU_SPEC "-m elf32ppclinux %{!shared: %{!static: \
1260 %{rdynamic:-export-dynamic} \
1261 %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}}}"
1263 #define CPP_OS_GNU_SPEC "-D__unix__ -D__GNU__ \
1265 %{!ansi: -Dunix -D__unix}} \
1266 -Asystem=gnu -Asystem=unix -Asystem=posix %{pthread:-D_REENTRANT}"
1268 /* NetBSD support. */
1269 #define LIB_NETBSD_SPEC "\
1270 %{profile:-lgmon -lc_p} %{!profile:-lc}"
1272 #define STARTFILE_NETBSD_SPEC "\
1273 ncrti.o%s crt0.o%s \
1274 %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
1276 #define ENDFILE_NETBSD_SPEC "\
1277 %{!shared:crtend.o%s} %{shared:crtendS.o%s} \
1280 #define LINK_START_NETBSD_SPEC "\
1283 #define LINK_OS_NETBSD_SPEC "\
1284 %{!shared: %{!static: \
1285 %{rdynamic:-export-dynamic} \
1286 %{!dynamic-linker:-dynamic-linker /usr/libexec/ld.elf_so}}}"
1288 #define CPP_OS_NETBSD_SPEC "\
1289 -D__powerpc__ -D__NetBSD__ -D__ELF__ -D__KPRINTF_ATTRIBUTE__"
1291 /* VxWorks support. */
1292 /* VxWorks does all the library stuff itself. */
1293 #define LIB_VXWORKS_SPEC ""
1295 /* VxWorks provides the functionality of crt0.o and friends itself. */
1297 #define STARTFILE_VXWORKS_SPEC ""
1299 #define ENDFILE_VXWORKS_SPEC ""
1301 /* Because it uses ld -r, vxworks has no start/end files, nor starting
1304 #define LINK_START_VXWORKS_SPEC ""
1306 #define LINK_OS_VXWORKS_SPEC "-r"
1308 #define CPP_OS_VXWORKS_SPEC "\
1311 %{mpowerpc*: -DCPU=PPC603} \
1312 %{!mno-powerpc: -DCPU=PPC603}} \
1313 %{mcpu=powerpc: -DCPU=PPC603} \
1314 %{mcpu=401: -DCPU=PPC403} \
1315 %{mcpu=403: -DCPU=PPC403} \
1316 %{mcpu=405: -DCPU=PPC405} \
1317 %{mcpu=601: -DCPU=PPC601} \
1318 %{mcpu=602: -DCPU=PPC603} \
1319 %{mcpu=603: -DCPU=PPC603} \
1320 %{mcpu=603e: -DCPU=PPC603} \
1321 %{mcpu=ec603e: -DCPU=PPC603} \
1322 %{mcpu=604: -DCPU=PPC604} \
1323 %{mcpu=604e: -DCPU=PPC604} \
1324 %{mcpu=620: -DCPU=PPC604} \
1325 %{mcpu=740: -DCPU=PPC603} \
1326 %{mcpu=7450: -DCPU=PPC603} \
1327 %{mcpu=750: -DCPU=PPC603} \
1328 %{mcpu=801: -DCPU=PPC603} \
1329 %{mcpu=821: -DCPU=PPC603} \
1330 %{mcpu=823: -DCPU=PPC603} \
1331 %{mcpu=860: -DCPU=PPC603}"
1333 /* Define any extra SPECS that the compiler needs to generate. */
1334 /* Override rs6000.h definition. */
1335 #undef SUBTARGET_EXTRA_SPECS
1336 #define SUBTARGET_EXTRA_SPECS \
1337 { "cpp_sysv", CPP_SYSV_SPEC }, \
1338 { "cpp_sysv_default", CPP_SYSV_DEFAULT_SPEC }, \
1339 { "cpp_endian_default", CPP_ENDIAN_DEFAULT_SPEC }, \
1340 { "cpp_endian", CPP_ENDIAN_SPEC }, \
1341 { "lib_ads", LIB_ADS_SPEC }, \
1342 { "lib_yellowknife", LIB_YELLOWKNIFE_SPEC }, \
1343 { "lib_mvme", LIB_MVME_SPEC }, \
1344 { "lib_sim", LIB_SIM_SPEC }, \
1345 { "lib_freebsd", LIB_FREEBSD_SPEC }, \
1346 { "lib_gnu", LIB_GNU_SPEC }, \
1347 { "lib_linux", LIB_LINUX_SPEC }, \
1348 { "lib_netbsd", LIB_NETBSD_SPEC }, \
1349 { "lib_vxworks", LIB_VXWORKS_SPEC }, \
1350 { "lib_default", LIB_DEFAULT_SPEC }, \
1351 { "startfile_ads", STARTFILE_ADS_SPEC }, \
1352 { "startfile_yellowknife", STARTFILE_YELLOWKNIFE_SPEC }, \
1353 { "startfile_mvme", STARTFILE_MVME_SPEC }, \
1354 { "startfile_sim", STARTFILE_SIM_SPEC }, \
1355 { "startfile_freebsd", STARTFILE_FREEBSD_SPEC }, \
1356 { "startfile_gnu", STARTFILE_GNU_SPEC }, \
1357 { "startfile_linux", STARTFILE_LINUX_SPEC }, \
1358 { "startfile_netbsd", STARTFILE_NETBSD_SPEC }, \
1359 { "startfile_vxworks", STARTFILE_VXWORKS_SPEC }, \
1360 { "startfile_default", STARTFILE_DEFAULT_SPEC }, \
1361 { "endfile_ads", ENDFILE_ADS_SPEC }, \
1362 { "endfile_yellowknife", ENDFILE_YELLOWKNIFE_SPEC }, \
1363 { "endfile_mvme", ENDFILE_MVME_SPEC }, \
1364 { "endfile_sim", ENDFILE_SIM_SPEC }, \
1365 { "endfile_freebsd", ENDFILE_FREEBSD_SPEC }, \
1366 { "endfile_gnu", ENDFILE_GNU_SPEC }, \
1367 { "endfile_linux", ENDFILE_LINUX_SPEC }, \
1368 { "endfile_netbsd", ENDFILE_NETBSD_SPEC }, \
1369 { "endfile_vxworks", ENDFILE_VXWORKS_SPEC }, \
1370 { "endfile_default", ENDFILE_DEFAULT_SPEC }, \
1371 { "link_path", LINK_PATH_SPEC }, \
1372 { "link_shlib", LINK_SHLIB_SPEC }, \
1373 { "link_target", LINK_TARGET_SPEC }, \
1374 { "link_start", LINK_START_SPEC }, \
1375 { "link_start_ads", LINK_START_ADS_SPEC }, \
1376 { "link_start_yellowknife", LINK_START_YELLOWKNIFE_SPEC }, \
1377 { "link_start_mvme", LINK_START_MVME_SPEC }, \
1378 { "link_start_sim", LINK_START_SIM_SPEC }, \
1379 { "link_start_freebsd", LINK_START_FREEBSD_SPEC }, \
1380 { "link_start_gnu", LINK_START_GNU_SPEC }, \
1381 { "link_start_linux", LINK_START_LINUX_SPEC }, \
1382 { "link_start_netbsd", LINK_START_NETBSD_SPEC }, \
1383 { "link_start_vxworks", LINK_START_VXWORKS_SPEC }, \
1384 { "link_start_default", LINK_START_DEFAULT_SPEC }, \
1385 { "link_os", LINK_OS_SPEC }, \
1386 { "link_os_ads", LINK_OS_ADS_SPEC }, \
1387 { "link_os_yellowknife", LINK_OS_YELLOWKNIFE_SPEC }, \
1388 { "link_os_mvme", LINK_OS_MVME_SPEC }, \
1389 { "link_os_sim", LINK_OS_SIM_SPEC }, \
1390 { "link_os_freebsd", LINK_OS_FREEBSD_SPEC }, \
1391 { "link_os_linux", LINK_OS_LINUX_SPEC }, \
1392 { "link_os_gnu", LINK_OS_GNU_SPEC }, \
1393 { "link_os_netbsd", LINK_OS_NETBSD_SPEC }, \
1394 { "link_os_vxworks", LINK_OS_VXWORKS_SPEC }, \
1395 { "link_os_default", LINK_OS_DEFAULT_SPEC }, \
1396 { "cc1_endian_big", CC1_ENDIAN_BIG_SPEC }, \
1397 { "cc1_endian_little", CC1_ENDIAN_LITTLE_SPEC }, \
1398 { "cc1_endian_default", CC1_ENDIAN_DEFAULT_SPEC }, \
1399 { "cpp_endian_big", CPP_ENDIAN_BIG_SPEC }, \
1400 { "cpp_endian_little", CPP_ENDIAN_LITTLE_SPEC }, \
1401 { "cpp_float_default", CPP_FLOAT_DEFAULT_SPEC }, \
1402 { "cpp_longdouble_default", CPP_LONGDOUBLE_DEFAULT_SPEC }, \
1403 { "cpp_os_ads", CPP_OS_ADS_SPEC }, \
1404 { "cpp_os_yellowknife", CPP_OS_YELLOWKNIFE_SPEC }, \
1405 { "cpp_os_mvme", CPP_OS_MVME_SPEC }, \
1406 { "cpp_os_sim", CPP_OS_SIM_SPEC }, \
1407 { "cpp_os_freebsd", CPP_OS_FREEBSD_SPEC }, \
1408 { "cpp_os_gnu", CPP_OS_GNU_SPEC }, \
1409 { "cpp_os_linux", CPP_OS_LINUX_SPEC }, \
1410 { "cpp_os_netbsd", CPP_OS_NETBSD_SPEC }, \
1411 { "cpp_os_vxworks", CPP_OS_VXWORKS_SPEC }, \
1412 { "cpp_os_default", CPP_OS_DEFAULT_SPEC },
1414 /* Define this macro as a C expression for the initializer of an
1415 array of string to tell the driver program which options are
1416 defaults for this target and thus do not need to be handled
1417 specially when using `MULTILIB_OPTIONS'.
1419 Do not define this macro if `MULTILIB_OPTIONS' is not defined in
1420 the target makefile fragment or if none of the options listed in
1421 `MULTILIB_OPTIONS' are set by default. *Note Target Fragment::. */
1423 #define MULTILIB_DEFAULTS { "mbig", "mcall-sysv" }
1425 /* Define this macro if the code for function profiling should come
1426 before the function prologue. Normally, the profiling code comes
1428 #define PROFILE_BEFORE_PROLOGUE 1
1430 /* Function name to call to do profiling. */
1431 #define RS6000_MCOUNT "_mcount"
1433 /* Define this macro (to a value of 1) if you want to support the
1434 Win32 style pragmas #pragma pack(push,<n>)' and #pragma
1435 pack(pop)'. The pack(push,<n>) pragma specifies the maximum
1436 alignment (in bytes) of fields within a structure, in much the
1437 same way as the __aligned__' and __packed__' __attribute__'s
1438 do. A pack value of zero resets the behaviour to the default.
1439 Successive invocations of this pragma cause the previous values to
1440 be stacked, so that invocations of #pragma pack(pop)' will return
1441 to the previous value. */
1443 #define HANDLE_PRAGMA_PACK_PUSH_POP 1
1445 /* Define library calls for quad FP operations. These are all part of the
1446 PowerPC 32bit ABI. */
1447 #define ADDTF3_LIBCALL "_q_add"
1448 #define DIVTF3_LIBCALL "_q_div"
1449 #define EXTENDDFTF2_LIBCALL "_q_dtoq"
1450 #define EQTF2_LIBCALL "_q_feq"
1451 #define GETF2_LIBCALL "_q_fge"
1452 #define GTTF2_LIBCALL "_q_fgt"
1453 #define LETF2_LIBCALL "_q_fle"
1454 #define LTTF2_LIBCALL "_q_flt"
1455 #define NETF2_LIBCALL "_q_fne"
1456 #define FLOATSITF2_LIBCALL "_q_itoq"
1457 #define MULTF3_LIBCALL "_q_mul"
1458 #define NEGTF2_LIBCALL "_q_neg"
1459 #define TRUNCTFDF2_LIBCALL "_q_qtod"
1460 #define FIX_TRUNCTFSI2_LIBCALL "_q_qtoi"
1461 #define TRUNCTFSF2_LIBCALL "_q_qtos"
1462 #define FIXUNS_TRUNCTFSI2_LIBCALL "_q_qtou"
1463 #define SQRTTF_LIBCALL "_q_sqrt"
1464 #define EXTENDSFTF2_LIBCALL "_q_stoq"
1465 #define SUBTF3_LIBCALL "_q_sub"
1466 #define FLOATUNSSITF2_LIBCALL "_q_utoq"
1468 #define INIT_TARGET_OPTABS \
1470 if (TARGET_HARD_FLOAT) \
1472 add_optab->handlers[(int) TFmode].libfunc \
1473 = init_one_libfunc (ADDTF3_LIBCALL); \
1474 sub_optab->handlers[(int) TFmode].libfunc \
1475 = init_one_libfunc (SUBTF3_LIBCALL); \
1476 neg_optab->handlers[(int) TFmode].libfunc \
1477 = init_one_libfunc (NEGTF2_LIBCALL); \
1478 smul_optab->handlers[(int) TFmode].libfunc \
1479 = init_one_libfunc (MULTF3_LIBCALL); \
1480 sdiv_optab->handlers[(int) TFmode].libfunc \
1481 = init_one_libfunc (DIVTF3_LIBCALL); \
1482 eqtf2_libfunc = init_one_libfunc (EQTF2_LIBCALL); \
1483 netf2_libfunc = init_one_libfunc (NETF2_LIBCALL); \
1484 gttf2_libfunc = init_one_libfunc (GTTF2_LIBCALL); \
1485 getf2_libfunc = init_one_libfunc (GETF2_LIBCALL); \
1486 lttf2_libfunc = init_one_libfunc (LTTF2_LIBCALL); \
1487 letf2_libfunc = init_one_libfunc (LETF2_LIBCALL); \
1488 trunctfsf2_libfunc = init_one_libfunc (TRUNCTFSF2_LIBCALL); \
1489 trunctfdf2_libfunc = init_one_libfunc (TRUNCTFDF2_LIBCALL); \
1490 extendsftf2_libfunc = init_one_libfunc (EXTENDSFTF2_LIBCALL); \
1491 extenddftf2_libfunc = init_one_libfunc (EXTENDDFTF2_LIBCALL); \
1492 floatsitf_libfunc = init_one_libfunc (FLOATSITF2_LIBCALL); \
1493 fixtfsi_libfunc = init_one_libfunc (FIX_TRUNCTFSI2_LIBCALL); \
1494 fixunstfsi_libfunc \
1495 = init_one_libfunc (FIXUNS_TRUNCTFSI2_LIBCALL); \
1496 if (TARGET_PPC_GPOPT || TARGET_POWER2) \
1497 sqrt_optab->handlers[(int) TFmode].libfunc \
1498 = init_one_libfunc (SQRTTF_LIBCALL); \
1502 /* Select a format to encode pointers in exception handling data. CODE
1503 is 0 for data, 1 for code labels, 2 for function pointers. GLOBAL is
1504 true if the symbol may be affected by dynamic relocations. */
1505 #define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
1506 ((flag_pic || TARGET_RELOCATABLE) \
1507 ? (((GLOBAL) ? DW_EH_PE_indirect : 0) | DW_EH_PE_pcrel | DW_EH_PE_sdata4) \
1510 #define TARGET_ASM_EXCEPTION_SECTION readonly_data_section
1512 #define DOUBLE_INT_ASM_OP "\t.quad\t"
1514 /* Generate entries in .fixup for relocatable addresses. */
1515 #define RELOCATABLE_NEEDS_FIXUP