1 /* Definitions of target machine for GNU compiler, for IBM RS/6000.
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003, 2004, 2005, 2006
4 Free Software Foundation, Inc.
5 Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu)
7 This file is part of GCC.
9 GCC is free software; you can redistribute it and/or modify it
10 under the terms of the GNU General Public License as published
11 by the Free Software Foundation; either version 2, or (at your
12 option) any later version.
14 GCC is distributed in the hope that it will be useful, but WITHOUT
15 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
16 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
17 License for more details.
19 You should have received a copy of the GNU General Public License
20 along with GCC; see the file COPYING. If not, write to the
21 Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston,
22 MA 02110-1301, USA. */
24 /* Note that some other tm.h files include this one and then override
25 many of the definitions. */
27 /* Definitions for the object file format. These are set at
30 #define OBJECT_XCOFF 1
33 #define OBJECT_MACHO 4
35 #define TARGET_ELF (TARGET_OBJECT_FORMAT == OBJECT_ELF)
36 #define TARGET_XCOFF (TARGET_OBJECT_FORMAT == OBJECT_XCOFF)
37 #define TARGET_MACOS (TARGET_OBJECT_FORMAT == OBJECT_PEF)
38 #define TARGET_MACHO (TARGET_OBJECT_FORMAT == OBJECT_MACHO)
44 /* Control whether function entry points use a "dot" symbol when
48 /* Default string to use for cpu if not specified. */
49 #ifndef TARGET_CPU_DEFAULT
50 #define TARGET_CPU_DEFAULT ((char *)0)
53 /* If configured for PPC405, support PPC405CR Erratum77. */
54 #ifdef CONFIG_PPC405CR
55 #define PPC405_ERRATUM77 (rs6000_cpu == PROCESSOR_PPC405)
57 #define PPC405_ERRATUM77 0
60 /* Common ASM definitions used by ASM_SPEC among the various targets
61 for handling -mcpu=xxx switches. */
62 #define ASM_CPU_SPEC \
64 %{mpower: %{!mpower2: -mpwr}} \
66 %{mpowerpc64*: -mppc64} \
67 %{!mpowerpc64*: %{mpowerpc*: -mppc}} \
68 %{mno-power: %{!mpowerpc*: -mcom}} \
69 %{!mno-power: %{!mpower*: %(asm_default)}}} \
70 %{mcpu=common: -mcom} \
71 %{mcpu=power: -mpwr} \
72 %{mcpu=power2: -mpwrx} \
73 %{mcpu=power3: -mppc64} \
74 %{mcpu=power4: -mpower4} \
75 %{mcpu=power5: -mpower4} \
76 %{mcpu=power5+: -mpower4} \
77 %{mcpu=power6: -mpower4 -maltivec} \
78 %{mcpu=powerpc: -mppc} \
80 %{mcpu=rios1: -mpwr} \
81 %{mcpu=rios2: -mpwrx} \
84 %{mcpu=rs64a: -mppc64} \
88 %{mcpu=405fp: -m405} \
90 %{mcpu=440fp: -m440} \
96 %{mcpu=ec603e: -mppc} \
99 %{mcpu=620: -mppc64} \
100 %{mcpu=630: -mppc64} \
104 %{mcpu=7400: -mppc -maltivec} \
105 %{mcpu=7450: -mppc -maltivec} \
106 %{mcpu=G4: -mppc -maltivec} \
111 %{mcpu=970: -mpower4 -maltivec} \
112 %{mcpu=G5: -mpower4 -maltivec} \
113 %{mcpu=8540: -me500} \
114 %{maltivec: -maltivec} \
117 #define CPP_DEFAULT_SPEC ""
119 #define ASM_DEFAULT_SPEC ""
121 /* This macro defines names of additional specifications to put in the specs
122 that can be used in various specifications like CC1_SPEC. Its definition
123 is an initializer with a subgrouping for each command option.
125 Each subgrouping contains a string constant, that defines the
126 specification name, and a string constant that used by the GCC driver
129 Do not define this macro if it does not need to do anything. */
131 #define SUBTARGET_EXTRA_SPECS
133 #define EXTRA_SPECS \
134 { "cpp_default", CPP_DEFAULT_SPEC }, \
135 { "asm_cpu", ASM_CPU_SPEC }, \
136 { "asm_default", ASM_DEFAULT_SPEC }, \
137 SUBTARGET_EXTRA_SPECS
139 /* Architecture type. */
141 /* Define TARGET_MFCRF if the target assembler does not support the
142 optional field operand for mfcr. */
144 #ifndef HAVE_AS_MFCRF
146 #define TARGET_MFCRF 0
149 /* Define TARGET_POPCNTB if the target assembler does not support the
150 popcount byte instruction. */
152 #ifndef HAVE_AS_POPCNTB
153 #undef TARGET_POPCNTB
154 #define TARGET_POPCNTB 0
157 /* Define TARGET_FPRND if the target assembler does not support the
158 fp rounding instructions. */
160 #ifndef HAVE_AS_FPRND
162 #define TARGET_FPRND 0
165 #ifndef TARGET_SECURE_PLT
166 #define TARGET_SECURE_PLT 0
169 #define TARGET_32BIT (! TARGET_64BIT)
172 #define HAVE_AS_TLS 0
175 /* Return 1 for a symbol ref for a thread-local storage symbol. */
176 #define RS6000_SYMBOL_REF_TLS_P(RTX) \
177 (GET_CODE (RTX) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (RTX) != 0)
180 /* For libgcc2 we make sure this is a compile time constant */
181 #if defined (__64BIT__) || defined (__powerpc64__) || defined (__ppc64__)
182 #undef TARGET_POWERPC64
183 #define TARGET_POWERPC64 1
185 #undef TARGET_POWERPC64
186 #define TARGET_POWERPC64 0
189 /* The option machinery will define this. */
192 #define TARGET_DEFAULT (MASK_POWER | MASK_MULTIPLE | MASK_STRING)
194 /* Processor type. Order must match cpu attribute in MD file. */
218 extern enum processor_type rs6000_cpu;
220 /* Recast the processor type to the cpu attribute. */
221 #define rs6000_cpu_attr ((enum attr_cpu)rs6000_cpu)
223 /* Define generic processor types based upon current deployment. */
224 #define PROCESSOR_COMMON PROCESSOR_PPC601
225 #define PROCESSOR_POWER PROCESSOR_RIOS1
226 #define PROCESSOR_POWERPC PROCESSOR_PPC604
227 #define PROCESSOR_POWERPC64 PROCESSOR_RS64A
229 /* Define the default processor. This is overridden by other tm.h files. */
230 #define PROCESSOR_DEFAULT PROCESSOR_RIOS1
231 #define PROCESSOR_DEFAULT64 PROCESSOR_RS64A
233 /* Specify the dialect of assembler to use. New mnemonics is dialect one
234 and the old mnemonics are dialect zero. */
235 #define ASSEMBLER_DIALECT (TARGET_NEW_MNEMONICS ? 1 : 0)
237 /* Types of costly dependences. */
238 enum rs6000_dependence_cost
240 max_dep_latency = 1000,
243 true_store_to_load_dep_costly,
244 store_to_load_dep_costly
247 /* Types of nop insertion schemes in sched target hook sched_finish. */
248 enum rs6000_nop_insertion
250 sched_finish_regroup_exact = 1000,
251 sched_finish_pad_groups,
255 /* Dispatch group termination caused by an insn. */
256 enum group_termination
262 /* Support for a compile-time default CPU, et cetera. The rules are:
263 --with-cpu is ignored if -mcpu is specified.
264 --with-tune is ignored if -mtune is specified.
265 --with-float is ignored if -mhard-float or -msoft-float are
267 #define OPTION_DEFAULT_SPECS \
268 {"cpu", "%{!mcpu=*:-mcpu=%(VALUE)}" }, \
269 {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \
270 {"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }
272 /* rs6000_select[0] is reserved for the default cpu defined via --with-cpu */
273 struct rs6000_cpu_select
281 extern struct rs6000_cpu_select rs6000_select[];
284 extern const char *rs6000_debug_name; /* Name for -mdebug-xxxx option */
285 extern int rs6000_debug_stack; /* debug stack applications */
286 extern int rs6000_debug_arg; /* debug argument handling */
288 #define TARGET_DEBUG_STACK rs6000_debug_stack
289 #define TARGET_DEBUG_ARG rs6000_debug_arg
291 extern const char *rs6000_traceback_name; /* Type of traceback table. */
293 /* These are separate from target_flags because we've run out of bits
295 extern int rs6000_long_double_type_size;
296 extern int rs6000_ieeequad;
297 extern int rs6000_altivec_abi;
298 extern int rs6000_spe_abi;
299 extern int rs6000_float_gprs;
300 extern int rs6000_alignment_flags;
301 extern const char *rs6000_sched_insert_nops_str;
302 extern enum rs6000_nop_insertion rs6000_sched_insert_nops;
304 /* Alignment options for fields in structures for sub-targets following
306 ALIGN_POWER word-aligns FP doubles (default AIX ABI).
307 ALIGN_NATURAL doubleword-aligns FP doubles (align to object size).
309 Override the macro definitions when compiling libobjc to avoid undefined
310 reference to rs6000_alignment_flags due to library's use of GCC alignment
311 macros which use the macros below. */
313 #ifndef IN_TARGET_LIBS
314 #define MASK_ALIGN_POWER 0x00000000
315 #define MASK_ALIGN_NATURAL 0x00000001
316 #define TARGET_ALIGN_NATURAL (rs6000_alignment_flags & MASK_ALIGN_NATURAL)
318 #define TARGET_ALIGN_NATURAL 0
321 #define TARGET_LONG_DOUBLE_128 (rs6000_long_double_type_size == 128)
322 #define TARGET_IEEEQUAD rs6000_ieeequad
323 #define TARGET_ALTIVEC_ABI rs6000_altivec_abi
325 #define TARGET_SPE_ABI 0
327 #define TARGET_E500 0
328 #define TARGET_ISEL 0
329 #define TARGET_FPRS 1
330 #define TARGET_E500_SINGLE 0
331 #define TARGET_E500_DOUBLE 0
333 /* Sometimes certain combinations of command options do not make sense
334 on a particular target machine. You can define a macro
335 `OVERRIDE_OPTIONS' to take account of this. This macro, if
336 defined, is executed once just after all the command options have
339 Do not use this macro to turn on various extra optimizations for
340 `-O'. That is what `OPTIMIZATION_OPTIONS' is for.
342 On the RS/6000 this is used to define the target cpu type. */
344 #define OVERRIDE_OPTIONS rs6000_override_options (TARGET_CPU_DEFAULT)
346 /* Define this to change the optimizations performed by default. */
347 #define OPTIMIZATION_OPTIONS(LEVEL,SIZE) optimization_options(LEVEL,SIZE)
349 /* Show we can debug even without a frame pointer. */
350 #define CAN_DEBUG_WITHOUT_FP
353 #define REGISTER_TARGET_PRAGMAS() do { \
354 c_register_pragma (0, "longcall", rs6000_pragma_longcall); \
355 targetm.resolve_overloaded_builtin = altivec_resolve_overloaded_builtin; \
358 /* Target #defines. */
359 #define TARGET_CPU_CPP_BUILTINS() \
360 rs6000_cpu_cpp_builtins (pfile)
362 /* This is used by rs6000_cpu_cpp_builtins to indicate the byte order
363 we're compiling for. Some configurations may need to override it. */
364 #define RS6000_CPU_CPP_ENDIAN_BUILTINS() \
367 if (BYTES_BIG_ENDIAN) \
369 builtin_define ("__BIG_ENDIAN__"); \
370 builtin_define ("_BIG_ENDIAN"); \
371 builtin_assert ("machine=bigendian"); \
375 builtin_define ("__LITTLE_ENDIAN__"); \
376 builtin_define ("_LITTLE_ENDIAN"); \
377 builtin_assert ("machine=littleendian"); \
382 /* Target machine storage layout. */
384 /* Define this macro if it is advisable to hold scalars in registers
385 in a wider mode than that declared by the program. In such cases,
386 the value is constrained to be within the bounds of the declared
387 type, but kept valid in the wider mode. The signedness of the
388 extension may differ from that of the type. */
390 #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \
391 if (GET_MODE_CLASS (MODE) == MODE_INT \
392 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
393 (MODE) = TARGET_32BIT ? SImode : DImode;
395 /* Define this if most significant bit is lowest numbered
396 in instructions that operate on numbered bit-fields. */
397 /* That is true on RS/6000. */
398 #define BITS_BIG_ENDIAN 1
400 /* Define this if most significant byte of a word is the lowest numbered. */
401 /* That is true on RS/6000. */
402 #define BYTES_BIG_ENDIAN 1
404 /* Define this if most significant word of a multiword number is lowest
407 For RS/6000 we can decide arbitrarily since there are no machine
408 instructions for them. Might as well be consistent with bits and bytes. */
409 #define WORDS_BIG_ENDIAN 1
411 #define MAX_BITS_PER_WORD 64
413 /* Width of a word, in units (bytes). */
414 #define UNITS_PER_WORD (! TARGET_POWERPC64 ? 4 : 8)
416 #define MIN_UNITS_PER_WORD UNITS_PER_WORD
418 #define MIN_UNITS_PER_WORD 4
420 #define UNITS_PER_FP_WORD 8
421 #define UNITS_PER_ALTIVEC_WORD 16
422 #define UNITS_PER_SPE_WORD 8
424 /* Type used for ptrdiff_t, as a string used in a declaration. */
425 #define PTRDIFF_TYPE "int"
427 /* Type used for size_t, as a string used in a declaration. */
428 #define SIZE_TYPE "long unsigned int"
430 /* Type used for wchar_t, as a string used in a declaration. */
431 #define WCHAR_TYPE "short unsigned int"
433 /* Width of wchar_t in bits. */
434 #define WCHAR_TYPE_SIZE 16
436 /* A C expression for the size in bits of the type `short' on the
437 target machine. If you don't define this, the default is half a
438 word. (If this would be less than one storage unit, it is
439 rounded up to one unit.) */
440 #define SHORT_TYPE_SIZE 16
442 /* A C expression for the size in bits of the type `int' on the
443 target machine. If you don't define this, the default is one
445 #define INT_TYPE_SIZE 32
447 /* A C expression for the size in bits of the type `long' on the
448 target machine. If you don't define this, the default is one
450 #define LONG_TYPE_SIZE (TARGET_32BIT ? 32 : 64)
452 /* A C expression for the size in bits of the type `long long' on the
453 target machine. If you don't define this, the default is two
455 #define LONG_LONG_TYPE_SIZE 64
457 /* A C expression for the size in bits of the type `float' on the
458 target machine. If you don't define this, the default is one
460 #define FLOAT_TYPE_SIZE 32
462 /* A C expression for the size in bits of the type `double' on the
463 target machine. If you don't define this, the default is two
465 #define DOUBLE_TYPE_SIZE 64
467 /* A C expression for the size in bits of the type `long double' on
468 the target machine. If you don't define this, the default is two
470 #define LONG_DOUBLE_TYPE_SIZE rs6000_long_double_type_size
472 /* Define this to set long double type size to use in libgcc2.c, which can
473 not depend on target_flags. */
474 #ifdef __LONG_DOUBLE_128__
475 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128
477 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
480 /* Work around rs6000_long_double_type_size dependency in ada/targtyps.c. */
481 #define WIDEST_HARDWARE_FP_SIZE 64
483 /* Width in bits of a pointer.
484 See also the macro `Pmode' defined below. */
485 #define POINTER_SIZE (TARGET_32BIT ? 32 : 64)
487 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
488 #define PARM_BOUNDARY (TARGET_32BIT ? 32 : 64)
490 /* Boundary (in *bits*) on which stack pointer should be aligned. */
491 #define STACK_BOUNDARY \
492 ((TARGET_32BIT && !TARGET_ALTIVEC && !TARGET_ALTIVEC_ABI) ? 64 : 128)
494 /* Allocation boundary (in *bits*) for the code of a function. */
495 #define FUNCTION_BOUNDARY 32
497 /* No data type wants to be aligned rounder than this. */
498 #define BIGGEST_ALIGNMENT 128
500 /* A C expression to compute the alignment for a variables in the
501 local store. TYPE is the data type, and ALIGN is the alignment
502 that the object would ordinarily have. */
503 #define LOCAL_ALIGNMENT(TYPE, ALIGN) \
504 ((TARGET_ALTIVEC && TREE_CODE (TYPE) == VECTOR_TYPE) ? 128 : \
505 (TARGET_E500_DOUBLE && TYPE_MODE (TYPE) == DFmode) ? 64 : \
506 (TARGET_SPE && TREE_CODE (TYPE) == VECTOR_TYPE \
507 && SPE_VECTOR_MODE (TYPE_MODE (TYPE))) ? 64 : ALIGN)
509 /* Alignment of field after `int : 0' in a structure. */
510 #define EMPTY_FIELD_BOUNDARY 32
512 /* Every structure's size must be a multiple of this. */
513 #define STRUCTURE_SIZE_BOUNDARY 8
515 /* Return 1 if a structure or array containing FIELD should be
516 accessed using `BLKMODE'.
518 For the SPE, simd types are V2SI, and gcc can be tempted to put the
519 entire thing in a DI and use subregs to access the internals.
520 store_bit_field() will force (subreg:DI (reg:V2SI x))'s to the
521 back-end. Because a single GPR can hold a V2SI, but not a DI, the
522 best thing to do is set structs to BLKmode and avoid Severe Tire
525 On e500 v2, DF and DI modes suffer from the same anomaly. DF can
526 fit into 1, whereas DI still needs two. */
527 #define MEMBER_TYPE_FORCES_BLK(FIELD, MODE) \
528 ((TARGET_SPE && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE) \
529 || (TARGET_E500_DOUBLE && (MODE) == DFmode))
531 /* A bit-field declared as `int' forces `int' alignment for the struct. */
532 #define PCC_BITFIELD_TYPE_MATTERS 1
534 /* Make strings word-aligned so strcpy from constants will be faster.
535 Make vector constants quadword aligned. */
536 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
537 (TREE_CODE (EXP) == STRING_CST \
538 && (ALIGN) < BITS_PER_WORD \
542 /* Make arrays of chars word-aligned for the same reasons.
543 Align vectors to 128 bits. Align SPE vectors and E500 v2 doubles to
545 #define DATA_ALIGNMENT(TYPE, ALIGN) \
546 (TREE_CODE (TYPE) == VECTOR_TYPE ? (TARGET_SPE_ABI ? 64 : 128) \
547 : (TARGET_E500_DOUBLE && TYPE_MODE (TYPE) == DFmode) ? 64 \
548 : TREE_CODE (TYPE) == ARRAY_TYPE \
549 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
550 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
552 /* Nonzero if move instructions will actually fail to work
553 when given unaligned data. */
554 #define STRICT_ALIGNMENT 0
556 /* Define this macro to be the value 1 if unaligned accesses have a cost
557 many times greater than aligned accesses, for example if they are
558 emulated in a trap handler. */
559 #define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) \
561 || (((MODE) == SFmode || (MODE) == DFmode || (MODE) == TFmode \
562 || (MODE) == DImode) \
565 /* Standard register usage. */
567 /* Number of actual hardware registers.
568 The hardware registers are assigned numbers for the compiler
569 from 0 to just below FIRST_PSEUDO_REGISTER.
570 All registers that the compiler knows about must be given numbers,
571 even those that are not normally considered general registers.
573 RS/6000 has 32 fixed-point registers, 32 floating-point registers,
574 an MQ register, a count register, a link register, and 8 condition
575 register fields, which we view here as separate registers. AltiVec
576 adds 32 vector registers and a VRsave register.
578 In addition, the difference between the frame and argument pointers is
579 a function of the number of registers saved, so we need to have a
580 register for AP that will later be eliminated in favor of SP or FP.
581 This is a normal register, but it is fixed.
583 We also create a pseudo register for float/int conversions, that will
584 really represent the memory location used. It is represented here as
585 a register, in order to work around problems in allocating stack storage
588 Another pseudo (not included in DWARF_FRAME_REGISTERS) is soft frame
589 pointer, which is eventually eliminated in favor of SP or FP. */
591 #define FIRST_PSEUDO_REGISTER 114
593 /* This must be included for pre gcc 3.0 glibc compatibility. */
594 #define PRE_GCC3_DWARF_FRAME_REGISTERS 77
596 /* Add 32 dwarf columns for synthetic SPE registers. */
597 #define DWARF_FRAME_REGISTERS ((FIRST_PSEUDO_REGISTER - 1) + 32)
599 /* The SPE has an additional 32 synthetic registers, with DWARF debug
600 info numbering for these registers starting at 1200. While eh_frame
601 register numbering need not be the same as the debug info numbering,
602 we choose to number these regs for eh_frame at 1200 too. This allows
603 future versions of the rs6000 backend to add hard registers and
604 continue to use the gcc hard register numbering for eh_frame. If the
605 extra SPE registers in eh_frame were numbered starting from the
606 current value of FIRST_PSEUDO_REGISTER, then if FIRST_PSEUDO_REGISTER
607 changed we'd need to introduce a mapping in DWARF_FRAME_REGNUM to
608 avoid invalidating older SPE eh_frame info.
610 We must map them here to avoid huge unwinder tables mostly consisting
612 #define DWARF_REG_TO_UNWIND_COLUMN(r) \
613 ((r) > 1200 ? ((r) - 1200 + FIRST_PSEUDO_REGISTER - 1) : (r))
615 /* Use gcc hard register numbering for eh_frame. */
616 #define DWARF_FRAME_REGNUM(REGNO) (REGNO)
618 /* 1 for registers that have pervasive standard uses
619 and are not available for the register allocator.
621 On RS/6000, r1 is used for the stack. On Darwin, r2 is available
622 as a local register; for all other OS's r2 is the TOC pointer.
624 cr5 is not supposed to be used.
626 On System V implementations, r13 is fixed and not available for use. */
628 #define FIXED_REGISTERS \
629 {0, 1, FIXED_R2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, FIXED_R13, 0, 0, \
630 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
631 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
632 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
633 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, \
634 /* AltiVec registers. */ \
635 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
636 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
641 /* 1 for registers not available across function calls.
642 These must include the FIXED_REGISTERS and also any
643 registers that can be used without being saved.
644 The latter must include the registers where values are returned
645 and the register where structure-value addresses are passed.
646 Aside from that, you can include as many other registers as you like. */
648 #define CALL_USED_REGISTERS \
649 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
650 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
651 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \
652 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
653 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, \
654 /* AltiVec registers. */ \
655 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
656 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
661 /* Like `CALL_USED_REGISTERS' except this macro doesn't require that
662 the entire set of `FIXED_REGISTERS' be included.
663 (`CALL_USED_REGISTERS' must be a superset of `FIXED_REGISTERS').
664 This macro is optional. If not specified, it defaults to the value
665 of `CALL_USED_REGISTERS'. */
667 #define CALL_REALLY_USED_REGISTERS \
668 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
669 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
670 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \
671 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
672 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, \
673 /* AltiVec registers. */ \
674 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
675 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
686 #define MAX_CR_REGNO 75
688 #define FIRST_ALTIVEC_REGNO 77
689 #define LAST_ALTIVEC_REGNO 108
690 #define TOTAL_ALTIVEC_REGS (LAST_ALTIVEC_REGNO - FIRST_ALTIVEC_REGNO + 1)
691 #define VRSAVE_REGNO 109
692 #define VSCR_REGNO 110
693 #define SPE_ACC_REGNO 111
694 #define SPEFSCR_REGNO 112
696 #define FIRST_SAVED_ALTIVEC_REGNO (FIRST_ALTIVEC_REGNO+20)
697 #define FIRST_SAVED_FP_REGNO (14+32)
698 #define FIRST_SAVED_GP_REGNO 13
700 /* List the order in which to allocate registers. Each register must be
701 listed once, even those in FIXED_REGISTERS.
703 We allocate in the following order:
704 fp0 (not saved or used for anything)
705 fp13 - fp2 (not saved; incoming fp arg registers)
706 fp1 (not saved; return value)
707 fp31 - fp14 (saved; order given to save least number)
708 cr7, cr6 (not saved or special)
709 cr1 (not saved, but used for FP operations)
710 cr0 (not saved, but used for arithmetic operations)
711 cr4, cr3, cr2 (saved)
712 r0 (not saved; cannot be base reg)
713 r9 (not saved; best for TImode)
714 r11, r10, r8-r4 (not saved; highest used first to make less conflict)
715 r3 (not saved; return value register)
716 r31 - r13 (saved; order given to save least number)
717 r12 (not saved; if used for DImode or DFmode would use r13)
718 mq (not saved; best to use it if we can)
719 ctr (not saved; when we have the choice ctr is better)
721 cr5, r1, r2, ap, xer (fixed)
722 v0 - v1 (not saved or used for anything)
723 v13 - v3 (not saved; incoming vector arg registers)
724 v2 (not saved; incoming vector arg reg; return value)
725 v19 - v14 (not saved or used for anything)
726 v31 - v20 (saved; order given to save least number)
728 spe_acc, spefscr (fixed)
733 #define MAYBE_R2_AVAILABLE
734 #define MAYBE_R2_FIXED 2,
736 #define MAYBE_R2_AVAILABLE 2,
737 #define MAYBE_R2_FIXED
740 #define REG_ALLOC_ORDER \
742 45, 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, \
744 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, \
745 50, 49, 48, 47, 46, \
746 75, 74, 69, 68, 72, 71, 70, \
747 0, MAYBE_R2_AVAILABLE \
748 9, 11, 10, 8, 7, 6, 5, 4, \
750 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, \
751 18, 17, 16, 15, 14, 13, 12, \
753 73, 1, MAYBE_R2_FIXED 67, 76, \
754 /* AltiVec registers. */ \
756 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, 80, \
758 96, 95, 94, 93, 92, 91, \
759 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, 97, \
764 /* True if register is floating-point. */
765 #define FP_REGNO_P(N) ((N) >= 32 && (N) <= 63)
767 /* True if register is a condition register. */
768 #define CR_REGNO_P(N) ((N) >= 68 && (N) <= 75)
770 /* True if register is a condition register, but not cr0. */
771 #define CR_REGNO_NOT_CR0_P(N) ((N) >= 69 && (N) <= 75)
773 /* True if register is an integer register. */
774 #define INT_REGNO_P(N) \
775 ((N) <= 31 || (N) == ARG_POINTER_REGNUM || (N) == FRAME_POINTER_REGNUM)
777 /* SPE SIMD registers are just the GPRs. */
778 #define SPE_SIMD_REGNO_P(N) ((N) <= 31)
780 /* True if register is the XER register. */
781 #define XER_REGNO_P(N) ((N) == XER_REGNO)
783 /* True if register is an AltiVec register. */
784 #define ALTIVEC_REGNO_P(N) ((N) >= FIRST_ALTIVEC_REGNO && (N) <= LAST_ALTIVEC_REGNO)
786 /* Return number of consecutive hard regs needed starting at reg REGNO
787 to hold something of mode MODE. */
789 #define HARD_REGNO_NREGS(REGNO, MODE) rs6000_hard_regno_nregs ((REGNO), (MODE))
791 #define HARD_REGNO_CALL_PART_CLOBBERED(REGNO, MODE) \
792 ((TARGET_32BIT && TARGET_POWERPC64 \
793 && (GET_MODE_SIZE (MODE) > 4) \
794 && INT_REGNO_P (REGNO)) ? 1 : 0)
796 #define ALTIVEC_VECTOR_MODE(MODE) \
797 ((MODE) == V16QImode \
798 || (MODE) == V8HImode \
799 || (MODE) == V4SFmode \
800 || (MODE) == V4SImode)
802 #define SPE_VECTOR_MODE(MODE) \
803 ((MODE) == V4HImode \
804 || (MODE) == V2SFmode \
805 || (MODE) == V1DImode \
806 || (MODE) == V2SImode)
808 #define UNITS_PER_SIMD_WORD \
809 (TARGET_ALTIVEC ? UNITS_PER_ALTIVEC_WORD \
810 : (TARGET_SPE ? UNITS_PER_SPE_WORD : UNITS_PER_WORD))
812 /* Value is TRUE if hard register REGNO can hold a value of
813 machine-mode MODE. */
814 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
815 rs6000_hard_regno_mode_ok_p[(int)(MODE)][REGNO]
817 /* Value is 1 if it is a good idea to tie two pseudo registers
818 when one has mode MODE1 and one has mode MODE2.
819 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
820 for any hard reg, then this must be 0 for correct output. */
821 #define MODES_TIEABLE_P(MODE1, MODE2) \
822 (SCALAR_FLOAT_MODE_P (MODE1) \
823 ? SCALAR_FLOAT_MODE_P (MODE2) \
824 : SCALAR_FLOAT_MODE_P (MODE2) \
825 ? SCALAR_FLOAT_MODE_P (MODE1) \
826 : GET_MODE_CLASS (MODE1) == MODE_CC \
827 ? GET_MODE_CLASS (MODE2) == MODE_CC \
828 : GET_MODE_CLASS (MODE2) == MODE_CC \
829 ? GET_MODE_CLASS (MODE1) == MODE_CC \
830 : SPE_VECTOR_MODE (MODE1) \
831 ? SPE_VECTOR_MODE (MODE2) \
832 : SPE_VECTOR_MODE (MODE2) \
833 ? SPE_VECTOR_MODE (MODE1) \
834 : ALTIVEC_VECTOR_MODE (MODE1) \
835 ? ALTIVEC_VECTOR_MODE (MODE2) \
836 : ALTIVEC_VECTOR_MODE (MODE2) \
837 ? ALTIVEC_VECTOR_MODE (MODE1) \
840 /* Post-reload, we can't use any new AltiVec registers, as we already
841 emitted the vrsave mask. */
843 #define HARD_REGNO_RENAME_OK(SRC, DST) \
844 (! ALTIVEC_REGNO_P (DST) || regs_ever_live[DST])
846 /* A C expression returning the cost of moving data from a register of class
847 CLASS1 to one of CLASS2. */
849 #define REGISTER_MOVE_COST rs6000_register_move_cost
851 /* A C expressions returning the cost of moving data of MODE from a register to
854 #define MEMORY_MOVE_COST rs6000_memory_move_cost
856 /* Specify the cost of a branch insn; roughly the number of extra insns that
857 should be added to avoid a branch.
859 Set this to 3 on the RS/6000 since that is roughly the average cost of an
860 unscheduled conditional branch. */
862 #define BRANCH_COST 3
864 /* Override BRANCH_COST heuristic which empirically produces worse
865 performance for removing short circuiting from the logical ops. */
867 #define LOGICAL_OP_NON_SHORT_CIRCUIT 0
869 /* A fixed register used at prologue and epilogue generation to fix
870 addressing modes. The SPE needs heavy addressing fixes at the last
871 minute, and it's best to save a register for it.
873 AltiVec also needs fixes, but we've gotten around using r11, which
874 is actually wrong because when use_backchain_to_restore_sp is true,
875 we end up clobbering r11.
877 The AltiVec case needs to be fixed. Dunno if we should break ABI
878 compatibility and reserve a register for it as well.. */
880 #define FIXED_SCRATCH (TARGET_SPE ? 14 : 11)
882 /* Define this macro to change register usage conditional on target
885 #define CONDITIONAL_REGISTER_USAGE rs6000_conditional_register_usage ()
887 /* Specify the registers used for certain standard purposes.
888 The values of these macros are register numbers. */
890 /* RS/6000 pc isn't overloaded on a register that the compiler knows about. */
891 /* #define PC_REGNUM */
893 /* Register to use for pushing function arguments. */
894 #define STACK_POINTER_REGNUM 1
896 /* Base register for access to local variables of the function. */
897 #define HARD_FRAME_POINTER_REGNUM 31
899 /* Base register for access to local variables of the function. */
900 #define FRAME_POINTER_REGNUM 113
902 /* Value should be nonzero if functions must have frame pointers.
903 Zero means the frame pointer need not be set up (and parms
904 may be accessed via the stack pointer) in functions that seem suitable.
905 This is computed in `reload', in reload1.c. */
906 #define FRAME_POINTER_REQUIRED 0
908 /* Base register for access to arguments of the function. */
909 #define ARG_POINTER_REGNUM 67
911 /* Place to put static chain when calling a function that requires it. */
912 #define STATIC_CHAIN_REGNUM 11
914 /* Link register number. */
915 #define LINK_REGISTER_REGNUM 65
917 /* Count register number. */
918 #define COUNT_REGISTER_REGNUM 66
920 /* Define the classes of registers for register constraints in the
921 machine description. Also define ranges of constants.
923 One of the classes must always be named ALL_REGS and include all hard regs.
924 If there is more than one class, another class must be named NO_REGS
925 and contain no registers.
927 The name GENERAL_REGS must be the name of a class (or an alias for
928 another name such as ALL_REGS). This is the class of registers
929 that is allowed by "g" or "r" in a register constraint.
930 Also, registers outside this class are allocated only when
931 instructions express preferences for them.
933 The classes must be numbered in nondecreasing order; that is,
934 a larger-numbered class must never be contained completely
935 in a smaller-numbered class.
937 For any two classes, it is very desirable that there be another
938 class that represents their union. */
940 /* The RS/6000 has three types of registers, fixed-point, floating-point,
941 and condition registers, plus three special registers, MQ, CTR, and the
942 link register. AltiVec adds a vector register class.
944 However, r0 is special in that it cannot be used as a base register.
945 So make a class for registers valid as base registers.
947 Also, cr0 is the only condition code register that can be used in
948 arithmetic insns, so make a separate class for it. */
976 #define N_REG_CLASSES (int) LIM_REG_CLASSES
978 /* Give names of register classes as strings for dump file. */
980 #define REG_CLASS_NAMES \
991 "NON_SPECIAL_REGS", \
995 "LINK_OR_CTR_REGS", \
997 "SPEC_OR_GEN_REGS", \
1005 /* Define which registers fit in which classes.
1006 This is an initializer for a vector of HARD_REG_SET
1007 of length N_REG_CLASSES. */
1009 #define REG_CLASS_CONTENTS \
1011 { 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
1012 { 0xfffffffe, 0x00000000, 0x00000008, 0x00020000 }, /* BASE_REGS */ \
1013 { 0xffffffff, 0x00000000, 0x00000008, 0x00020000 }, /* GENERAL_REGS */ \
1014 { 0x00000000, 0xffffffff, 0x00000000, 0x00000000 }, /* FLOAT_REGS */ \
1015 { 0x00000000, 0x00000000, 0xffffe000, 0x00001fff }, /* ALTIVEC_REGS */ \
1016 { 0x00000000, 0x00000000, 0x00000000, 0x00002000 }, /* VRSAVE_REGS */ \
1017 { 0x00000000, 0x00000000, 0x00000000, 0x00004000 }, /* VSCR_REGS */ \
1018 { 0x00000000, 0x00000000, 0x00000000, 0x00008000 }, /* SPE_ACC_REGS */ \
1019 { 0x00000000, 0x00000000, 0x00000000, 0x00010000 }, /* SPEFSCR_REGS */ \
1020 { 0xffffffff, 0xffffffff, 0x00000008, 0x00020000 }, /* NON_SPECIAL_REGS */ \
1021 { 0x00000000, 0x00000000, 0x00000001, 0x00000000 }, /* MQ_REGS */ \
1022 { 0x00000000, 0x00000000, 0x00000002, 0x00000000 }, /* LINK_REGS */ \
1023 { 0x00000000, 0x00000000, 0x00000004, 0x00000000 }, /* CTR_REGS */ \
1024 { 0x00000000, 0x00000000, 0x00000006, 0x00000000 }, /* LINK_OR_CTR_REGS */ \
1025 { 0x00000000, 0x00000000, 0x00000007, 0x00002000 }, /* SPECIAL_REGS */ \
1026 { 0xffffffff, 0x00000000, 0x0000000f, 0x00022000 }, /* SPEC_OR_GEN_REGS */ \
1027 { 0x00000000, 0x00000000, 0x00000010, 0x00000000 }, /* CR0_REGS */ \
1028 { 0x00000000, 0x00000000, 0x00000ff0, 0x00000000 }, /* CR_REGS */ \
1029 { 0xffffffff, 0x00000000, 0x0000efff, 0x00020000 }, /* NON_FLOAT_REGS */ \
1030 { 0x00000000, 0x00000000, 0x00001000, 0x00000000 }, /* XER_REGS */ \
1031 { 0xffffffff, 0xffffffff, 0xffffffff, 0x0003ffff } /* ALL_REGS */ \
1034 /* The same information, inverted:
1035 Return the class number of the smallest class containing
1036 reg number REGNO. This could be a conditional expression
1037 or could index an array. */
1039 #define REGNO_REG_CLASS(REGNO) \
1040 ((REGNO) == 0 ? GENERAL_REGS \
1041 : (REGNO) < 32 ? BASE_REGS \
1042 : FP_REGNO_P (REGNO) ? FLOAT_REGS \
1043 : ALTIVEC_REGNO_P (REGNO) ? ALTIVEC_REGS \
1044 : (REGNO) == CR0_REGNO ? CR0_REGS \
1045 : CR_REGNO_P (REGNO) ? CR_REGS \
1046 : (REGNO) == MQ_REGNO ? MQ_REGS \
1047 : (REGNO) == LINK_REGISTER_REGNUM ? LINK_REGS \
1048 : (REGNO) == COUNT_REGISTER_REGNUM ? CTR_REGS \
1049 : (REGNO) == ARG_POINTER_REGNUM ? BASE_REGS \
1050 : (REGNO) == XER_REGNO ? XER_REGS \
1051 : (REGNO) == VRSAVE_REGNO ? VRSAVE_REGS \
1052 : (REGNO) == VSCR_REGNO ? VRSAVE_REGS \
1053 : (REGNO) == SPE_ACC_REGNO ? SPE_ACC_REGS \
1054 : (REGNO) == SPEFSCR_REGNO ? SPEFSCR_REGS \
1055 : (REGNO) == FRAME_POINTER_REGNUM ? BASE_REGS \
1058 /* The class value for index registers, and the one for base regs. */
1059 #define INDEX_REG_CLASS GENERAL_REGS
1060 #define BASE_REG_CLASS BASE_REGS
1062 /* Given an rtx X being reloaded into a reg required to be
1063 in class CLASS, return the class of reg to actually use.
1064 In general this is just CLASS; but on some machines
1065 in some cases it is preferable to use a more restrictive class.
1067 On the RS/6000, we have to return NO_REGS when we want to reload a
1068 floating-point CONST_DOUBLE to force it to be copied to memory.
1070 We also don't want to reload integer values into floating-point
1071 registers if we can at all help it. In fact, this can
1072 cause reload to die, if it tries to generate a reload of CTR
1073 into a FP register and discovers it doesn't have the memory location
1076 ??? Would it be a good idea to have reload do the converse, that is
1077 try to reload floating modes into FP registers if possible?
1080 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
1082 && reg_classes_intersect_p ((CLASS), FLOAT_REGS)) \
1084 : (GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \
1085 && (CLASS) == NON_SPECIAL_REGS) \
1089 /* Return the register class of a scratch register needed to copy IN into
1090 or out of a register in CLASS in MODE. If it can be done directly,
1091 NO_REGS is returned. */
1093 #define SECONDARY_RELOAD_CLASS(CLASS,MODE,IN) \
1094 rs6000_secondary_reload_class (CLASS, MODE, IN)
1096 /* If we are copying between FP or AltiVec registers and anything
1097 else, we need a memory location. */
1099 #define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \
1100 ((CLASS1) != (CLASS2) && ((CLASS1) == FLOAT_REGS \
1101 || (CLASS2) == FLOAT_REGS \
1102 || (CLASS1) == ALTIVEC_REGS \
1103 || (CLASS2) == ALTIVEC_REGS))
1105 /* Return the maximum number of consecutive registers
1106 needed to represent mode MODE in a register of class CLASS.
1108 On RS/6000, this is the size of MODE in words,
1109 except in the FP regs, where a single reg is enough for two words. */
1110 #define CLASS_MAX_NREGS(CLASS, MODE) \
1111 (((CLASS) == FLOAT_REGS) \
1112 ? ((GET_MODE_SIZE (MODE) + UNITS_PER_FP_WORD - 1) / UNITS_PER_FP_WORD) \
1113 : (TARGET_E500_DOUBLE && (CLASS) == GENERAL_REGS && (MODE) == DFmode) \
1115 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
1117 /* Return nonzero if for CLASS a mode change from FROM to TO is invalid. */
1119 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
1120 (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \
1121 ? ((GET_MODE_SIZE (FROM) < 8 || GET_MODE_SIZE (TO) < 8 \
1122 || TARGET_IEEEQUAD) \
1123 && reg_classes_intersect_p (FLOAT_REGS, CLASS)) \
1124 : (((TARGET_E500_DOUBLE \
1125 && ((((TO) == DFmode) + ((FROM) == DFmode)) == 1 \
1126 || (((TO) == DImode) + ((FROM) == DImode)) == 1)) \
1128 && (SPE_VECTOR_MODE (FROM) + SPE_VECTOR_MODE (TO)) == 1)) \
1129 && reg_classes_intersect_p (GENERAL_REGS, CLASS)))
1131 /* Stack layout; function entry, exit and calling. */
1133 /* Enumeration to give which calling sequence to use. */
1136 ABI_AIX, /* IBM's AIX */
1137 ABI_V4, /* System V.4/eabi */
1138 ABI_DARWIN /* Apple's Darwin (OS X kernel) */
1141 extern enum rs6000_abi rs6000_current_abi; /* available for use by subtarget */
1143 /* Define this if pushing a word on the stack
1144 makes the stack pointer a smaller address. */
1145 #define STACK_GROWS_DOWNWARD
1147 /* Offsets recorded in opcodes are a multiple of this alignment factor. */
1148 #define DWARF_CIE_DATA_ALIGNMENT (-((int) (TARGET_32BIT ? 4 : 8)))
1150 /* Define this to nonzero if the nominal address of the stack frame
1151 is at the high-address end of the local variables;
1152 that is, each additional local variable allocated
1153 goes at a more negative offset in the frame.
1155 On the RS/6000, we grow upwards, from the area after the outgoing
1157 #define FRAME_GROWS_DOWNWARD (flag_stack_protect != 0)
1159 /* Size of the outgoing register save area */
1160 #define RS6000_REG_SAVE ((DEFAULT_ABI == ABI_AIX \
1161 || DEFAULT_ABI == ABI_DARWIN) \
1162 ? (TARGET_64BIT ? 64 : 32) \
1165 /* Size of the fixed area on the stack */
1166 #define RS6000_SAVE_AREA \
1167 (((DEFAULT_ABI == ABI_AIX || DEFAULT_ABI == ABI_DARWIN) ? 24 : 8) \
1168 << (TARGET_64BIT ? 1 : 0))
1170 /* MEM representing address to save the TOC register */
1171 #define RS6000_SAVE_TOC gen_rtx_MEM (Pmode, \
1172 plus_constant (stack_pointer_rtx, \
1173 (TARGET_32BIT ? 20 : 40)))
1175 /* Align an address */
1176 #define RS6000_ALIGN(n,a) (((n) + (a) - 1) & ~((a) - 1))
1178 /* Offset within stack frame to start allocating local variables at.
1179 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
1180 first local allocated. Otherwise, it is the offset to the BEGINNING
1181 of the first local allocated.
1183 On the RS/6000, the frame pointer is the same as the stack pointer,
1184 except for dynamic allocations. So we start after the fixed area and
1185 outgoing parameter area. */
1187 #define STARTING_FRAME_OFFSET \
1188 (FRAME_GROWS_DOWNWARD \
1190 : (RS6000_ALIGN (current_function_outgoing_args_size, \
1191 TARGET_ALTIVEC ? 16 : 8) \
1192 + RS6000_SAVE_AREA))
1194 /* Offset from the stack pointer register to an item dynamically
1195 allocated on the stack, e.g., by `alloca'.
1197 The default value for this macro is `STACK_POINTER_OFFSET' plus the
1198 length of the outgoing arguments. The default is correct for most
1199 machines. See `function.c' for details. */
1200 #define STACK_DYNAMIC_OFFSET(FUNDECL) \
1201 (RS6000_ALIGN (current_function_outgoing_args_size, \
1202 TARGET_ALTIVEC ? 16 : 8) \
1203 + (STACK_POINTER_OFFSET))
1205 /* If we generate an insn to push BYTES bytes,
1206 this says how many the stack pointer really advances by.
1207 On RS/6000, don't define this because there are no push insns. */
1208 /* #define PUSH_ROUNDING(BYTES) */
1210 /* Offset of first parameter from the argument pointer register value.
1211 On the RS/6000, we define the argument pointer to the start of the fixed
1213 #define FIRST_PARM_OFFSET(FNDECL) RS6000_SAVE_AREA
1215 /* Offset from the argument pointer register value to the top of
1216 stack. This is different from FIRST_PARM_OFFSET because of the
1217 register save area. */
1218 #define ARG_POINTER_CFA_OFFSET(FNDECL) 0
1220 /* Define this if stack space is still allocated for a parameter passed
1221 in a register. The value is the number of bytes allocated to this
1223 #define REG_PARM_STACK_SPACE(FNDECL) RS6000_REG_SAVE
1225 /* Define this if the above stack space is to be considered part of the
1226 space allocated by the caller. */
1227 #define OUTGOING_REG_PARM_STACK_SPACE
1229 /* This is the difference between the logical top of stack and the actual sp.
1231 For the RS/6000, sp points past the fixed area. */
1232 #define STACK_POINTER_OFFSET RS6000_SAVE_AREA
1234 /* Define this if the maximum size of all the outgoing args is to be
1235 accumulated and pushed during the prologue. The amount can be
1236 found in the variable current_function_outgoing_args_size. */
1237 #define ACCUMULATE_OUTGOING_ARGS 1
1239 /* Value is the number of bytes of arguments automatically
1240 popped when returning from a subroutine call.
1241 FUNDECL is the declaration node of the function (as a tree),
1242 FUNTYPE is the data type of the function (as a tree),
1243 or for a library call it is an identifier node for the subroutine name.
1244 SIZE is the number of bytes of arguments passed on the stack. */
1246 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
1248 /* Define how to find the value returned by a function.
1249 VALTYPE is the data type of the value (as a tree).
1250 If the precise function being called is known, FUNC is its FUNCTION_DECL;
1251 otherwise, FUNC is 0. */
1253 #define FUNCTION_VALUE(VALTYPE, FUNC) rs6000_function_value ((VALTYPE), (FUNC))
1255 /* Define how to find the value returned by a library function
1256 assuming the value has mode MODE. */
1258 #define LIBCALL_VALUE(MODE) rs6000_libcall_value ((MODE))
1260 /* DRAFT_V4_STRUCT_RET defaults off. */
1261 #define DRAFT_V4_STRUCT_RET 0
1263 /* Let TARGET_RETURN_IN_MEMORY control what happens. */
1264 #define DEFAULT_PCC_STRUCT_RETURN 0
1266 /* Mode of stack savearea.
1267 FUNCTION is VOIDmode because calling convention maintains SP.
1268 BLOCK needs Pmode for SP.
1269 NONLOCAL needs twice Pmode to maintain both backchain and SP. */
1270 #define STACK_SAVEAREA_MODE(LEVEL) \
1271 (LEVEL == SAVE_FUNCTION ? VOIDmode \
1272 : LEVEL == SAVE_NONLOCAL ? (TARGET_32BIT ? DImode : TImode) : Pmode)
1274 /* Minimum and maximum general purpose registers used to hold arguments. */
1275 #define GP_ARG_MIN_REG 3
1276 #define GP_ARG_MAX_REG 10
1277 #define GP_ARG_NUM_REG (GP_ARG_MAX_REG - GP_ARG_MIN_REG + 1)
1279 /* Minimum and maximum floating point registers used to hold arguments. */
1280 #define FP_ARG_MIN_REG 33
1281 #define FP_ARG_AIX_MAX_REG 45
1282 #define FP_ARG_V4_MAX_REG 40
1283 #define FP_ARG_MAX_REG ((DEFAULT_ABI == ABI_AIX \
1284 || DEFAULT_ABI == ABI_DARWIN) \
1285 ? FP_ARG_AIX_MAX_REG : FP_ARG_V4_MAX_REG)
1286 #define FP_ARG_NUM_REG (FP_ARG_MAX_REG - FP_ARG_MIN_REG + 1)
1288 /* Minimum and maximum AltiVec registers used to hold arguments. */
1289 #define ALTIVEC_ARG_MIN_REG (FIRST_ALTIVEC_REGNO + 2)
1290 #define ALTIVEC_ARG_MAX_REG (ALTIVEC_ARG_MIN_REG + 11)
1291 #define ALTIVEC_ARG_NUM_REG (ALTIVEC_ARG_MAX_REG - ALTIVEC_ARG_MIN_REG + 1)
1293 /* Return registers */
1294 #define GP_ARG_RETURN GP_ARG_MIN_REG
1295 #define FP_ARG_RETURN FP_ARG_MIN_REG
1296 #define ALTIVEC_ARG_RETURN (FIRST_ALTIVEC_REGNO + 2)
1298 /* Flags for the call/call_value rtl operations set up by function_arg */
1299 #define CALL_NORMAL 0x00000000 /* no special processing */
1300 /* Bits in 0x00000001 are unused. */
1301 #define CALL_V4_CLEAR_FP_ARGS 0x00000002 /* V.4, no FP args passed */
1302 #define CALL_V4_SET_FP_ARGS 0x00000004 /* V.4, FP args were passed */
1303 #define CALL_LONG 0x00000008 /* always call indirect */
1304 #define CALL_LIBCALL 0x00000010 /* libcall */
1306 /* We don't have prologue and epilogue functions to save/restore
1307 everything for most ABIs. */
1308 #define WORLD_SAVE_P(INFO) 0
1310 /* 1 if N is a possible register number for a function value
1311 as seen by the caller.
1313 On RS/6000, this is r3, fp1, and v2 (for AltiVec). */
1314 #define FUNCTION_VALUE_REGNO_P(N) \
1315 ((N) == GP_ARG_RETURN \
1316 || ((N) == FP_ARG_RETURN && TARGET_HARD_FLOAT && TARGET_FPRS) \
1317 || ((N) == ALTIVEC_ARG_RETURN && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI))
1319 /* 1 if N is a possible register number for function argument passing.
1320 On RS/6000, these are r3-r10 and fp1-fp13.
1321 On AltiVec, v2 - v13 are used for passing vectors. */
1322 #define FUNCTION_ARG_REGNO_P(N) \
1323 ((unsigned) (N) - GP_ARG_MIN_REG < GP_ARG_NUM_REG \
1324 || ((unsigned) (N) - ALTIVEC_ARG_MIN_REG < ALTIVEC_ARG_NUM_REG \
1325 && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI) \
1326 || ((unsigned) (N) - FP_ARG_MIN_REG < FP_ARG_NUM_REG \
1327 && TARGET_HARD_FLOAT && TARGET_FPRS))
1329 /* Define a data type for recording info about an argument list
1330 during the scan of that argument list. This data type should
1331 hold all necessary information about the function itself
1332 and about the args processed so far, enough to enable macros
1333 such as FUNCTION_ARG to determine where the next arg should go.
1335 On the RS/6000, this is a structure. The first element is the number of
1336 total argument words, the second is used to store the next
1337 floating-point register number, and the third says how many more args we
1338 have prototype types for.
1340 For ABI_V4, we treat these slightly differently -- `sysv_gregno' is
1341 the next available GP register, `fregno' is the next available FP
1342 register, and `words' is the number of words used on the stack.
1344 The varargs/stdarg support requires that this structure's size
1345 be a multiple of sizeof(int). */
1347 typedef struct rs6000_args
1349 int words; /* # words used for passing GP registers */
1350 int fregno; /* next available FP register */
1351 int vregno; /* next available AltiVec register */
1352 int nargs_prototype; /* # args left in the current prototype */
1353 int prototype; /* Whether a prototype was defined */
1354 int stdarg; /* Whether function is a stdarg function. */
1355 int call_cookie; /* Do special things for this call */
1356 int sysv_gregno; /* next available GP register */
1357 int intoffset; /* running offset in struct (darwin64) */
1358 int use_stack; /* any part of struct on stack (darwin64) */
1359 int named; /* false for varargs params */
1362 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1363 for a call to a function whose data type is FNTYPE.
1364 For a library call, FNTYPE is 0. */
1366 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
1367 init_cumulative_args (&CUM, FNTYPE, LIBNAME, FALSE, FALSE, N_NAMED_ARGS)
1369 /* Similar, but when scanning the definition of a procedure. We always
1370 set NARGS_PROTOTYPE large so we never return an EXPR_LIST. */
1372 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM, FNTYPE, LIBNAME) \
1373 init_cumulative_args (&CUM, FNTYPE, LIBNAME, TRUE, FALSE, 1000)
1375 /* Like INIT_CUMULATIVE_ARGS' but only used for outgoing libcalls. */
1377 #define INIT_CUMULATIVE_LIBCALL_ARGS(CUM, MODE, LIBNAME) \
1378 init_cumulative_args (&CUM, NULL_TREE, LIBNAME, FALSE, TRUE, 0)
1380 /* Update the data in CUM to advance over an argument
1381 of mode MODE and data type TYPE.
1382 (TYPE is null for libcalls where that information may not be available.) */
1384 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1385 function_arg_advance (&CUM, MODE, TYPE, NAMED, 0)
1387 /* Determine where to put an argument to a function.
1388 Value is zero to push the argument on the stack,
1389 or a hard register in which to store the argument.
1391 MODE is the argument's machine mode.
1392 TYPE is the data type of the argument (as a tree).
1393 This is null for libcalls where that information may
1395 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1396 the preceding args and about the function being called.
1397 NAMED is nonzero if this argument is a named parameter
1398 (otherwise it is an extra parameter matching an ellipsis).
1400 On RS/6000 the first eight words of non-FP are normally in registers
1401 and the rest are pushed. The first 13 FP args are in registers.
1403 If this is floating-point and no prototype is specified, we use
1404 both an FP and integer register (or possibly FP reg and stack). Library
1405 functions (when TYPE is zero) always have the proper types for args,
1406 so we can pass the FP value just in one register. emit_library_function
1407 doesn't support EXPR_LIST anyway. */
1409 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1410 function_arg (&CUM, MODE, TYPE, NAMED)
1412 /* If defined, a C expression which determines whether, and in which
1413 direction, to pad out an argument with extra space. The value
1414 should be of type `enum direction': either `upward' to pad above
1415 the argument, `downward' to pad below, or `none' to inhibit
1418 #define FUNCTION_ARG_PADDING(MODE, TYPE) function_arg_padding (MODE, TYPE)
1420 /* If defined, a C expression that gives the alignment boundary, in bits,
1421 of an argument with the specified mode and type. If it is not defined,
1422 PARM_BOUNDARY is used for all arguments. */
1424 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
1425 function_arg_boundary (MODE, TYPE)
1427 /* Implement `va_start' for varargs and stdarg. */
1428 #define EXPAND_BUILTIN_VA_START(valist, nextarg) \
1429 rs6000_va_start (valist, nextarg)
1431 #define PAD_VARARGS_DOWN \
1432 (FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
1434 /* Output assembler code to FILE to increment profiler label # LABELNO
1435 for profiling a function entry. */
1437 #define FUNCTION_PROFILER(FILE, LABELNO) \
1438 output_function_profiler ((FILE), (LABELNO));
1440 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1441 the stack pointer does not matter. No definition is equivalent to
1444 On the RS/6000, this is nonzero because we can restore the stack from
1445 its backpointer, which we maintain. */
1446 #define EXIT_IGNORE_STACK 1
1448 /* Define this macro as a C expression that is nonzero for registers
1449 that are used by the epilogue or the return' pattern. The stack
1450 and frame pointer registers are already be assumed to be used as
1453 #define EPILOGUE_USES(REGNO) \
1454 ((reload_completed && (REGNO) == LINK_REGISTER_REGNUM) \
1455 || (TARGET_ALTIVEC && (REGNO) == VRSAVE_REGNO) \
1456 || (current_function_calls_eh_return \
1461 /* TRAMPOLINE_TEMPLATE deleted */
1463 /* Length in units of the trampoline for entering a nested function. */
1465 #define TRAMPOLINE_SIZE rs6000_trampoline_size ()
1467 /* Emit RTL insns to initialize the variable parts of a trampoline.
1468 FNADDR is an RTX for the address of the function's pure code.
1469 CXT is an RTX for the static chain value for the function. */
1471 #define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, CXT) \
1472 rs6000_initialize_trampoline (ADDR, FNADDR, CXT)
1474 /* Definitions for __builtin_return_address and __builtin_frame_address.
1475 __builtin_return_address (0) should give link register (65), enable
1477 /* This should be uncommented, so that the link register is used, but
1478 currently this would result in unmatched insns and spilling fixed
1479 registers so we'll leave it for another day. When these problems are
1480 taken care of one additional fetch will be necessary in RETURN_ADDR_RTX.
1482 /* #define RETURN_ADDR_IN_PREVIOUS_FRAME */
1484 /* Number of bytes into the frame return addresses can be found. See
1485 rs6000_stack_info in rs6000.c for more information on how the different
1486 abi's store the return address. */
1487 #define RETURN_ADDRESS_OFFSET \
1488 ((DEFAULT_ABI == ABI_AIX \
1489 || DEFAULT_ABI == ABI_DARWIN) ? (TARGET_32BIT ? 8 : 16) : \
1490 (DEFAULT_ABI == ABI_V4) ? 4 : \
1491 (internal_error ("RETURN_ADDRESS_OFFSET not supported"), 0))
1493 /* The current return address is in link register (65). The return address
1494 of anything farther back is accessed normally at an offset of 8 from the
1496 #define RETURN_ADDR_RTX(COUNT, FRAME) \
1497 (rs6000_return_addr (COUNT, FRAME))
1500 /* Definitions for register eliminations.
1502 We have two registers that can be eliminated on the RS/6000. First, the
1503 frame pointer register can often be eliminated in favor of the stack
1504 pointer register. Secondly, the argument pointer register can always be
1505 eliminated; it is replaced with either the stack or frame pointer.
1507 In addition, we use the elimination mechanism to see if r30 is needed
1508 Initially we assume that it isn't. If it is, we spill it. This is done
1509 by making it an eliminable register. We replace it with itself so that
1510 if it isn't needed, then existing uses won't be modified. */
1512 /* This is an array of structures. Each structure initializes one pair
1513 of eliminable registers. The "from" register number is given first,
1514 followed by "to". Eliminations of the same "from" register are listed
1515 in order of preference. */
1516 #define ELIMINABLE_REGS \
1517 {{ HARD_FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1518 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1519 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
1520 { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1521 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
1522 { RS6000_PIC_OFFSET_TABLE_REGNUM, RS6000_PIC_OFFSET_TABLE_REGNUM } }
1524 /* Given FROM and TO register numbers, say whether this elimination is allowed.
1525 Frame pointer elimination is automatically handled.
1527 For the RS/6000, if frame pointer elimination is being done, we would like
1528 to convert ap into fp, not sp.
1530 We need r30 if -mminimal-toc was specified, and there are constant pool
1533 #define CAN_ELIMINATE(FROM, TO) \
1534 ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM \
1535 ? ! frame_pointer_needed \
1536 : (FROM) == RS6000_PIC_OFFSET_TABLE_REGNUM \
1537 ? ! TARGET_MINIMAL_TOC || TARGET_NO_TOC || get_pool_size () == 0 \
1540 /* Define the offset between two registers, one to be eliminated, and the other
1541 its replacement, at the start of a routine. */
1542 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1543 ((OFFSET) = rs6000_initial_elimination_offset(FROM, TO))
1545 /* Addressing modes, and classification of registers for them. */
1547 #define HAVE_PRE_DECREMENT 1
1548 #define HAVE_PRE_INCREMENT 1
1550 /* Macros to check register numbers against specific register classes. */
1552 /* These assume that REGNO is a hard or pseudo reg number.
1553 They give nonzero only if REGNO is a hard reg of the suitable class
1554 or a pseudo reg currently allocated to a suitable hard reg.
1555 Since they use reg_renumber, they are safe only once reg_renumber
1556 has been allocated, which happens in local-alloc.c. */
1558 #define REGNO_OK_FOR_INDEX_P(REGNO) \
1559 ((REGNO) < FIRST_PSEUDO_REGISTER \
1560 ? (REGNO) <= 31 || (REGNO) == 67 \
1561 || (REGNO) == FRAME_POINTER_REGNUM \
1562 : (reg_renumber[REGNO] >= 0 \
1563 && (reg_renumber[REGNO] <= 31 || reg_renumber[REGNO] == 67 \
1564 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM)))
1566 #define REGNO_OK_FOR_BASE_P(REGNO) \
1567 ((REGNO) < FIRST_PSEUDO_REGISTER \
1568 ? ((REGNO) > 0 && (REGNO) <= 31) || (REGNO) == 67 \
1569 || (REGNO) == FRAME_POINTER_REGNUM \
1570 : (reg_renumber[REGNO] > 0 \
1571 && (reg_renumber[REGNO] <= 31 || reg_renumber[REGNO] == 67 \
1572 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM)))
1574 /* Maximum number of registers that can appear in a valid memory address. */
1576 #define MAX_REGS_PER_ADDRESS 2
1578 /* Recognize any constant value that is a valid address. */
1580 #define CONSTANT_ADDRESS_P(X) \
1581 (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
1582 || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \
1583 || GET_CODE (X) == HIGH)
1585 /* Nonzero if the constant value X is a legitimate general operand.
1586 It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE.
1588 On the RS/6000, all integer constants are acceptable, most won't be valid
1589 for particular insns, though. Only easy FP constants are
1592 #define LEGITIMATE_CONSTANT_P(X) \
1593 (((GET_CODE (X) != CONST_DOUBLE \
1594 && GET_CODE (X) != CONST_VECTOR) \
1595 || GET_MODE (X) == VOIDmode \
1596 || (TARGET_POWERPC64 && GET_MODE (X) == DImode) \
1597 || easy_fp_constant (X, GET_MODE (X)) \
1598 || easy_vector_constant (X, GET_MODE (X))) \
1599 && !rs6000_tls_referenced_p (X))
1601 #define EASY_VECTOR_15(n) ((n) >= -16 && (n) <= 15)
1602 #define EASY_VECTOR_15_ADD_SELF(n) (!EASY_VECTOR_15((n)) \
1603 && EASY_VECTOR_15((n) >> 1) \
1606 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
1607 and check its validity for a certain class.
1608 We have two alternate definitions for each of them.
1609 The usual definition accepts all pseudo regs; the other rejects
1610 them unless they have been allocated suitable hard regs.
1611 The symbol REG_OK_STRICT causes the latter definition to be used.
1613 Most source files want to accept pseudo regs in the hope that
1614 they will get allocated to the class that the insn wants them to be in.
1615 Source files for reload pass need to be strict.
1616 After reload, it makes no difference, since pseudo regs have
1617 been eliminated by then. */
1619 #ifdef REG_OK_STRICT
1620 # define REG_OK_STRICT_FLAG 1
1622 # define REG_OK_STRICT_FLAG 0
1625 /* Nonzero if X is a hard reg that can be used as an index
1626 or if it is a pseudo reg in the non-strict case. */
1627 #define INT_REG_OK_FOR_INDEX_P(X, STRICT) \
1628 ((!(STRICT) && REGNO (X) >= FIRST_PSEUDO_REGISTER) \
1629 || REGNO_OK_FOR_INDEX_P (REGNO (X)))
1631 /* Nonzero if X is a hard reg that can be used as a base reg
1632 or if it is a pseudo reg in the non-strict case. */
1633 #define INT_REG_OK_FOR_BASE_P(X, STRICT) \
1634 ((!(STRICT) && REGNO (X) >= FIRST_PSEUDO_REGISTER) \
1635 || REGNO_OK_FOR_BASE_P (REGNO (X)))
1637 #define REG_OK_FOR_INDEX_P(X) INT_REG_OK_FOR_INDEX_P (X, REG_OK_STRICT_FLAG)
1638 #define REG_OK_FOR_BASE_P(X) INT_REG_OK_FOR_BASE_P (X, REG_OK_STRICT_FLAG)
1640 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
1641 that is a valid memory address for an instruction.
1642 The MODE argument is the machine mode for the MEM expression
1643 that wants to use this address.
1645 On the RS/6000, there are four valid addresses: a SYMBOL_REF that
1646 refers to a constant pool entry of an address (or the sum of it
1647 plus a constant), a short (16-bit signed) constant plus a register,
1648 the sum of two registers, or a register indirect, possibly with an
1649 auto-increment. For DFmode and DImode with a constant plus register,
1650 we must ensure that both words are addressable or PowerPC64 with offset
1653 For modes spanning multiple registers (DFmode in 32-bit GPRs,
1654 32-bit DImode, TImode), indexed addressing cannot be used because
1655 adjacent memory cells are accessed by adding word-sized offsets
1656 during assembly output. */
1658 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
1659 { if (rs6000_legitimate_address (MODE, X, REG_OK_STRICT_FLAG)) \
1663 /* Try machine-dependent ways of modifying an illegitimate address
1664 to be legitimate. If we find one, return the new, valid address.
1665 This macro is used in only one place: `memory_address' in explow.c.
1667 OLDX is the address as it was before break_out_memory_refs was called.
1668 In some cases it is useful to look at this to decide what needs to be done.
1670 MODE and WIN are passed so that this macro can use
1671 GO_IF_LEGITIMATE_ADDRESS.
1673 It is always safe for this macro to do nothing. It exists to recognize
1674 opportunities to optimize the output.
1676 On RS/6000, first check for the sum of a register with a constant
1677 integer that is out of range. If so, generate code to add the
1678 constant with the low-order 16 bits masked to the register and force
1679 this result into another register (this can be done with `cau').
1680 Then generate an address of REG+(CONST&0xffff), allowing for the
1681 possibility of bit 16 being a one.
1683 Then check for the sum of a register and something not constant, try to
1684 load the other things into a register and return the sum. */
1686 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
1687 { rtx result = rs6000_legitimize_address (X, OLDX, MODE); \
1688 if (result != NULL_RTX) \
1695 /* Try a machine-dependent way of reloading an illegitimate address
1696 operand. If we find one, push the reload and jump to WIN. This
1697 macro is used in only one place: `find_reloads_address' in reload.c.
1699 Implemented on rs6000 by rs6000_legitimize_reload_address.
1700 Note that (X) is evaluated twice; this is safe in current usage. */
1702 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
1705 (X) = rs6000_legitimize_reload_address ((X), (MODE), (OPNUM), \
1706 (int)(TYPE), (IND_LEVELS), &win); \
1711 /* Go to LABEL if ADDR (a legitimate address expression)
1712 has an effect that depends on the machine mode it is used for. */
1714 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
1716 if (rs6000_mode_dependent_address (ADDR)) \
1720 /* The register number of the register used to address a table of
1721 static data addresses in memory. In some cases this register is
1722 defined by a processor's "application binary interface" (ABI).
1723 When this macro is defined, RTL is generated for this register
1724 once, as with the stack pointer and frame pointer registers. If
1725 this macro is not defined, it is up to the machine-dependent files
1726 to allocate such a register (if necessary). */
1728 #define RS6000_PIC_OFFSET_TABLE_REGNUM 30
1729 #define PIC_OFFSET_TABLE_REGNUM (flag_pic ? RS6000_PIC_OFFSET_TABLE_REGNUM : INVALID_REGNUM)
1731 #define TOC_REGISTER (TARGET_MINIMAL_TOC ? RS6000_PIC_OFFSET_TABLE_REGNUM : 2)
1733 /* Define this macro if the register defined by
1734 `PIC_OFFSET_TABLE_REGNUM' is clobbered by calls. Do not define
1735 this macro if `PIC_OFFSET_TABLE_REGNUM' is not defined. */
1737 /* #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED */
1739 /* A C expression that is nonzero if X is a legitimate immediate
1740 operand on the target machine when generating position independent
1741 code. You can assume that X satisfies `CONSTANT_P', so you need
1742 not check this. You can also assume FLAG_PIC is true, so you need
1743 not check it either. You need not define this macro if all
1744 constants (including `SYMBOL_REF') can be immediate operands when
1745 generating position independent code. */
1747 /* #define LEGITIMATE_PIC_OPERAND_P (X) */
1749 /* Define this if some processing needs to be done immediately before
1750 emitting code for an insn. */
1752 /* #define FINAL_PRESCAN_INSN(INSN,OPERANDS,NOPERANDS) */
1754 /* Specify the machine mode that this machine uses
1755 for the index in the tablejump instruction. */
1756 #define CASE_VECTOR_MODE SImode
1758 /* Define as C expression which evaluates to nonzero if the tablejump
1759 instruction expects the table to contain offsets from the address of the
1761 Do not define this if the table should contain absolute addresses. */
1762 #define CASE_VECTOR_PC_RELATIVE 1
1764 /* Define this as 1 if `char' should by default be signed; else as 0. */
1765 #define DEFAULT_SIGNED_CHAR 0
1767 /* This flag, if defined, says the same insns that convert to a signed fixnum
1768 also convert validly to an unsigned one. */
1770 /* #define FIXUNS_TRUNC_LIKE_FIX_TRUNC */
1772 /* An integer expression for the size in bits of the largest integer machine
1773 mode that should actually be used. */
1775 /* Allow pairs of registers to be used, which is the intent of the default. */
1776 #define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TARGET_POWERPC64 ? TImode : DImode)
1778 /* Max number of bytes we can move from memory to memory
1779 in one reasonably fast instruction. */
1780 #define MOVE_MAX (! TARGET_POWERPC64 ? 4 : 8)
1781 #define MAX_MOVE_MAX 8
1783 /* Nonzero if access to memory by bytes is no faster than for words.
1784 Also nonzero if doing byte operations (specifically shifts) in registers
1786 #define SLOW_BYTE_ACCESS 1
1788 /* Define if operations between registers always perform the operation
1789 on the full register even if a narrower mode is specified. */
1790 #define WORD_REGISTER_OPERATIONS
1792 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
1793 will either zero-extend or sign-extend. The value of this macro should
1794 be the code that says which one of the two operations is implicitly
1795 done, UNKNOWN if none. */
1796 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
1798 /* Define if loading short immediate values into registers sign extends. */
1799 #define SHORT_IMMEDIATES_SIGN_EXTEND
1801 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
1802 is done just by pretending it is already truncated. */
1803 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
1805 /* The cntlzw and cntlzd instructions return 32 and 64 for input of zero. */
1806 #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \
1807 ((VALUE) = ((MODE) == SImode ? 32 : 64))
1809 /* The CTZ patterns return -1 for input of zero. */
1810 #define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = -1)
1812 /* Specify the machine mode that pointers have.
1813 After generation of rtl, the compiler makes no further distinction
1814 between pointers and any other objects of this machine mode. */
1815 #define Pmode (TARGET_32BIT ? SImode : DImode)
1817 /* Supply definition of STACK_SIZE_MODE for allocate_dynamic_stack_space. */
1818 #define STACK_SIZE_MODE (TARGET_32BIT ? SImode : DImode)
1820 /* Mode of a function address in a call instruction (for indexing purposes).
1821 Doesn't matter on RS/6000. */
1822 #define FUNCTION_MODE SImode
1824 /* Define this if addresses of constant functions
1825 shouldn't be put through pseudo regs where they can be cse'd.
1826 Desirable on machines where ordinary constants are expensive
1827 but a CALL with constant address is cheap. */
1828 #define NO_FUNCTION_CSE
1830 /* Define this to be nonzero if shift instructions ignore all but the low-order
1833 The sle and sre instructions which allow SHIFT_COUNT_TRUNCATED
1834 have been dropped from the PowerPC architecture. */
1836 #define SHIFT_COUNT_TRUNCATED (TARGET_POWER ? 1 : 0)
1838 /* Adjust the length of an INSN. LENGTH is the currently-computed length and
1839 should be adjusted to reflect any required changes. This macro is used when
1840 there is some systematic length adjustment required that would be difficult
1841 to express in the length attribute. */
1843 /* #define ADJUST_INSN_LENGTH(X,LENGTH) */
1845 /* Given a comparison code (EQ, NE, etc.) and the first operand of a
1846 COMPARE, return the mode to be used for the comparison. For
1847 floating-point, CCFPmode should be used. CCUNSmode should be used
1848 for unsigned comparisons. CCEQmode should be used when we are
1849 doing an inequality comparison on the result of a
1850 comparison. CCmode should be used in all other cases. */
1852 #define SELECT_CC_MODE(OP,X,Y) \
1853 (SCALAR_FLOAT_MODE_P (GET_MODE (X)) ? CCFPmode \
1854 : (OP) == GTU || (OP) == LTU || (OP) == GEU || (OP) == LEU ? CCUNSmode \
1855 : (((OP) == EQ || (OP) == NE) && COMPARISON_P (X) \
1856 ? CCEQmode : CCmode))
1858 /* Can the condition code MODE be safely reversed? This is safe in
1859 all cases on this port, because at present it doesn't use the
1860 trapping FP comparisons (fcmpo). */
1861 #define REVERSIBLE_CC_MODE(MODE) 1
1863 /* Given a condition code and a mode, return the inverse condition. */
1864 #define REVERSE_CONDITION(CODE, MODE) rs6000_reverse_condition (MODE, CODE)
1866 /* Define the information needed to generate branch and scc insns. This is
1867 stored from the compare operation. */
1869 extern GTY(()) rtx rs6000_compare_op0;
1870 extern GTY(()) rtx rs6000_compare_op1;
1871 extern int rs6000_compare_fp_p;
1873 /* Control the assembler format that we output. */
1875 /* A C string constant describing how to begin a comment in the target
1876 assembler language. The compiler assumes that the comment will end at
1877 the end of the line. */
1878 #define ASM_COMMENT_START " #"
1880 /* Flag to say the TOC is initialized */
1881 extern int toc_initialized;
1883 /* Macro to output a special constant pool entry. Go to WIN if we output
1884 it. Otherwise, it is written the usual way.
1886 On the RS/6000, toc entries are handled this way. */
1888 #define ASM_OUTPUT_SPECIAL_POOL_ENTRY(FILE, X, MODE, ALIGN, LABELNO, WIN) \
1889 { if (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P (X, MODE)) \
1891 output_toc (FILE, X, LABELNO, MODE); \
1896 #ifdef HAVE_GAS_WEAK
1897 #define RS6000_WEAK 1
1899 #define RS6000_WEAK 0
1903 /* Used in lieu of ASM_WEAKEN_LABEL. */
1904 #define ASM_WEAKEN_DECL(FILE, DECL, NAME, VAL) \
1907 fputs ("\t.weak\t", (FILE)); \
1908 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1909 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
1910 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
1913 fputs ("[DS]", (FILE)); \
1914 fputs ("\n\t.weak\t.", (FILE)); \
1915 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1917 fputc ('\n', (FILE)); \
1920 ASM_OUTPUT_DEF ((FILE), (NAME), (VAL)); \
1921 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
1922 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
1924 fputs ("\t.set\t.", (FILE)); \
1925 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1926 fputs (",.", (FILE)); \
1927 RS6000_OUTPUT_BASENAME ((FILE), (VAL)); \
1928 fputc ('\n', (FILE)); \
1935 #if HAVE_GAS_WEAKREF
1936 #define ASM_OUTPUT_WEAKREF(FILE, DECL, NAME, VALUE) \
1939 fputs ("\t.weakref\t", (FILE)); \
1940 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1941 fputs (", ", (FILE)); \
1942 RS6000_OUTPUT_BASENAME ((FILE), (VALUE)); \
1943 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
1944 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
1946 fputs ("\n\t.weakref\t.", (FILE)); \
1947 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1948 fputs (", .", (FILE)); \
1949 RS6000_OUTPUT_BASENAME ((FILE), (VALUE)); \
1951 fputc ('\n', (FILE)); \
1955 /* This implements the `alias' attribute. */
1956 #undef ASM_OUTPUT_DEF_FROM_DECLS
1957 #define ASM_OUTPUT_DEF_FROM_DECLS(FILE, DECL, TARGET) \
1960 const char *alias = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \
1961 const char *name = IDENTIFIER_POINTER (TARGET); \
1962 if (TREE_CODE (DECL) == FUNCTION_DECL \
1963 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
1965 if (TREE_PUBLIC (DECL)) \
1967 if (!RS6000_WEAK || !DECL_WEAK (DECL)) \
1969 fputs ("\t.globl\t.", FILE); \
1970 RS6000_OUTPUT_BASENAME (FILE, alias); \
1971 putc ('\n', FILE); \
1974 else if (TARGET_XCOFF) \
1976 fputs ("\t.lglobl\t.", FILE); \
1977 RS6000_OUTPUT_BASENAME (FILE, alias); \
1978 putc ('\n', FILE); \
1980 fputs ("\t.set\t.", FILE); \
1981 RS6000_OUTPUT_BASENAME (FILE, alias); \
1982 fputs (",.", FILE); \
1983 RS6000_OUTPUT_BASENAME (FILE, name); \
1984 fputc ('\n', FILE); \
1986 ASM_OUTPUT_DEF (FILE, alias, name); \
1990 #define TARGET_ASM_FILE_START rs6000_file_start
1992 /* Output to assembler file text saying following lines
1993 may contain character constants, extra white space, comments, etc. */
1995 #define ASM_APP_ON ""
1997 /* Output to assembler file text saying following lines
1998 no longer contain unusual constructs. */
2000 #define ASM_APP_OFF ""
2002 /* How to refer to registers in assembler output.
2003 This sequence is indexed by compiler's hard-register-number (see above). */
2005 extern char rs6000_reg_names[][8]; /* register names (0 vs. %r0). */
2007 #define REGISTER_NAMES \
2009 &rs6000_reg_names[ 0][0], /* r0 */ \
2010 &rs6000_reg_names[ 1][0], /* r1 */ \
2011 &rs6000_reg_names[ 2][0], /* r2 */ \
2012 &rs6000_reg_names[ 3][0], /* r3 */ \
2013 &rs6000_reg_names[ 4][0], /* r4 */ \
2014 &rs6000_reg_names[ 5][0], /* r5 */ \
2015 &rs6000_reg_names[ 6][0], /* r6 */ \
2016 &rs6000_reg_names[ 7][0], /* r7 */ \
2017 &rs6000_reg_names[ 8][0], /* r8 */ \
2018 &rs6000_reg_names[ 9][0], /* r9 */ \
2019 &rs6000_reg_names[10][0], /* r10 */ \
2020 &rs6000_reg_names[11][0], /* r11 */ \
2021 &rs6000_reg_names[12][0], /* r12 */ \
2022 &rs6000_reg_names[13][0], /* r13 */ \
2023 &rs6000_reg_names[14][0], /* r14 */ \
2024 &rs6000_reg_names[15][0], /* r15 */ \
2025 &rs6000_reg_names[16][0], /* r16 */ \
2026 &rs6000_reg_names[17][0], /* r17 */ \
2027 &rs6000_reg_names[18][0], /* r18 */ \
2028 &rs6000_reg_names[19][0], /* r19 */ \
2029 &rs6000_reg_names[20][0], /* r20 */ \
2030 &rs6000_reg_names[21][0], /* r21 */ \
2031 &rs6000_reg_names[22][0], /* r22 */ \
2032 &rs6000_reg_names[23][0], /* r23 */ \
2033 &rs6000_reg_names[24][0], /* r24 */ \
2034 &rs6000_reg_names[25][0], /* r25 */ \
2035 &rs6000_reg_names[26][0], /* r26 */ \
2036 &rs6000_reg_names[27][0], /* r27 */ \
2037 &rs6000_reg_names[28][0], /* r28 */ \
2038 &rs6000_reg_names[29][0], /* r29 */ \
2039 &rs6000_reg_names[30][0], /* r30 */ \
2040 &rs6000_reg_names[31][0], /* r31 */ \
2042 &rs6000_reg_names[32][0], /* fr0 */ \
2043 &rs6000_reg_names[33][0], /* fr1 */ \
2044 &rs6000_reg_names[34][0], /* fr2 */ \
2045 &rs6000_reg_names[35][0], /* fr3 */ \
2046 &rs6000_reg_names[36][0], /* fr4 */ \
2047 &rs6000_reg_names[37][0], /* fr5 */ \
2048 &rs6000_reg_names[38][0], /* fr6 */ \
2049 &rs6000_reg_names[39][0], /* fr7 */ \
2050 &rs6000_reg_names[40][0], /* fr8 */ \
2051 &rs6000_reg_names[41][0], /* fr9 */ \
2052 &rs6000_reg_names[42][0], /* fr10 */ \
2053 &rs6000_reg_names[43][0], /* fr11 */ \
2054 &rs6000_reg_names[44][0], /* fr12 */ \
2055 &rs6000_reg_names[45][0], /* fr13 */ \
2056 &rs6000_reg_names[46][0], /* fr14 */ \
2057 &rs6000_reg_names[47][0], /* fr15 */ \
2058 &rs6000_reg_names[48][0], /* fr16 */ \
2059 &rs6000_reg_names[49][0], /* fr17 */ \
2060 &rs6000_reg_names[50][0], /* fr18 */ \
2061 &rs6000_reg_names[51][0], /* fr19 */ \
2062 &rs6000_reg_names[52][0], /* fr20 */ \
2063 &rs6000_reg_names[53][0], /* fr21 */ \
2064 &rs6000_reg_names[54][0], /* fr22 */ \
2065 &rs6000_reg_names[55][0], /* fr23 */ \
2066 &rs6000_reg_names[56][0], /* fr24 */ \
2067 &rs6000_reg_names[57][0], /* fr25 */ \
2068 &rs6000_reg_names[58][0], /* fr26 */ \
2069 &rs6000_reg_names[59][0], /* fr27 */ \
2070 &rs6000_reg_names[60][0], /* fr28 */ \
2071 &rs6000_reg_names[61][0], /* fr29 */ \
2072 &rs6000_reg_names[62][0], /* fr30 */ \
2073 &rs6000_reg_names[63][0], /* fr31 */ \
2075 &rs6000_reg_names[64][0], /* mq */ \
2076 &rs6000_reg_names[65][0], /* lr */ \
2077 &rs6000_reg_names[66][0], /* ctr */ \
2078 &rs6000_reg_names[67][0], /* ap */ \
2080 &rs6000_reg_names[68][0], /* cr0 */ \
2081 &rs6000_reg_names[69][0], /* cr1 */ \
2082 &rs6000_reg_names[70][0], /* cr2 */ \
2083 &rs6000_reg_names[71][0], /* cr3 */ \
2084 &rs6000_reg_names[72][0], /* cr4 */ \
2085 &rs6000_reg_names[73][0], /* cr5 */ \
2086 &rs6000_reg_names[74][0], /* cr6 */ \
2087 &rs6000_reg_names[75][0], /* cr7 */ \
2089 &rs6000_reg_names[76][0], /* xer */ \
2091 &rs6000_reg_names[77][0], /* v0 */ \
2092 &rs6000_reg_names[78][0], /* v1 */ \
2093 &rs6000_reg_names[79][0], /* v2 */ \
2094 &rs6000_reg_names[80][0], /* v3 */ \
2095 &rs6000_reg_names[81][0], /* v4 */ \
2096 &rs6000_reg_names[82][0], /* v5 */ \
2097 &rs6000_reg_names[83][0], /* v6 */ \
2098 &rs6000_reg_names[84][0], /* v7 */ \
2099 &rs6000_reg_names[85][0], /* v8 */ \
2100 &rs6000_reg_names[86][0], /* v9 */ \
2101 &rs6000_reg_names[87][0], /* v10 */ \
2102 &rs6000_reg_names[88][0], /* v11 */ \
2103 &rs6000_reg_names[89][0], /* v12 */ \
2104 &rs6000_reg_names[90][0], /* v13 */ \
2105 &rs6000_reg_names[91][0], /* v14 */ \
2106 &rs6000_reg_names[92][0], /* v15 */ \
2107 &rs6000_reg_names[93][0], /* v16 */ \
2108 &rs6000_reg_names[94][0], /* v17 */ \
2109 &rs6000_reg_names[95][0], /* v18 */ \
2110 &rs6000_reg_names[96][0], /* v19 */ \
2111 &rs6000_reg_names[97][0], /* v20 */ \
2112 &rs6000_reg_names[98][0], /* v21 */ \
2113 &rs6000_reg_names[99][0], /* v22 */ \
2114 &rs6000_reg_names[100][0], /* v23 */ \
2115 &rs6000_reg_names[101][0], /* v24 */ \
2116 &rs6000_reg_names[102][0], /* v25 */ \
2117 &rs6000_reg_names[103][0], /* v26 */ \
2118 &rs6000_reg_names[104][0], /* v27 */ \
2119 &rs6000_reg_names[105][0], /* v28 */ \
2120 &rs6000_reg_names[106][0], /* v29 */ \
2121 &rs6000_reg_names[107][0], /* v30 */ \
2122 &rs6000_reg_names[108][0], /* v31 */ \
2123 &rs6000_reg_names[109][0], /* vrsave */ \
2124 &rs6000_reg_names[110][0], /* vscr */ \
2125 &rs6000_reg_names[111][0], /* spe_acc */ \
2126 &rs6000_reg_names[112][0], /* spefscr */ \
2127 &rs6000_reg_names[113][0], /* sfp */ \
2130 /* Table of additional register names to use in user input. */
2132 #define ADDITIONAL_REGISTER_NAMES \
2133 {{"r0", 0}, {"r1", 1}, {"r2", 2}, {"r3", 3}, \
2134 {"r4", 4}, {"r5", 5}, {"r6", 6}, {"r7", 7}, \
2135 {"r8", 8}, {"r9", 9}, {"r10", 10}, {"r11", 11}, \
2136 {"r12", 12}, {"r13", 13}, {"r14", 14}, {"r15", 15}, \
2137 {"r16", 16}, {"r17", 17}, {"r18", 18}, {"r19", 19}, \
2138 {"r20", 20}, {"r21", 21}, {"r22", 22}, {"r23", 23}, \
2139 {"r24", 24}, {"r25", 25}, {"r26", 26}, {"r27", 27}, \
2140 {"r28", 28}, {"r29", 29}, {"r30", 30}, {"r31", 31}, \
2141 {"fr0", 32}, {"fr1", 33}, {"fr2", 34}, {"fr3", 35}, \
2142 {"fr4", 36}, {"fr5", 37}, {"fr6", 38}, {"fr7", 39}, \
2143 {"fr8", 40}, {"fr9", 41}, {"fr10", 42}, {"fr11", 43}, \
2144 {"fr12", 44}, {"fr13", 45}, {"fr14", 46}, {"fr15", 47}, \
2145 {"fr16", 48}, {"fr17", 49}, {"fr18", 50}, {"fr19", 51}, \
2146 {"fr20", 52}, {"fr21", 53}, {"fr22", 54}, {"fr23", 55}, \
2147 {"fr24", 56}, {"fr25", 57}, {"fr26", 58}, {"fr27", 59}, \
2148 {"fr28", 60}, {"fr29", 61}, {"fr30", 62}, {"fr31", 63}, \
2149 {"v0", 77}, {"v1", 78}, {"v2", 79}, {"v3", 80}, \
2150 {"v4", 81}, {"v5", 82}, {"v6", 83}, {"v7", 84}, \
2151 {"v8", 85}, {"v9", 86}, {"v10", 87}, {"v11", 88}, \
2152 {"v12", 89}, {"v13", 90}, {"v14", 91}, {"v15", 92}, \
2153 {"v16", 93}, {"v17", 94}, {"v18", 95}, {"v19", 96}, \
2154 {"v20", 97}, {"v21", 98}, {"v22", 99}, {"v23", 100}, \
2155 {"v24", 101},{"v25", 102},{"v26", 103},{"v27", 104}, \
2156 {"v28", 105},{"v29", 106},{"v30", 107},{"v31", 108}, \
2157 {"vrsave", 109}, {"vscr", 110}, \
2158 {"spe_acc", 111}, {"spefscr", 112}, \
2159 /* no additional names for: mq, lr, ctr, ap */ \
2160 {"cr0", 68}, {"cr1", 69}, {"cr2", 70}, {"cr3", 71}, \
2161 {"cr4", 72}, {"cr5", 73}, {"cr6", 74}, {"cr7", 75}, \
2162 {"cc", 68}, {"sp", 1}, {"toc", 2} }
2164 /* Text to write out after a CALL that may be replaced by glue code by
2165 the loader. This depends on the AIX version. */
2166 #define RS6000_CALL_GLUE "cror 31,31,31"
2168 /* This is how to output an element of a case-vector that is relative. */
2170 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
2171 do { char buf[100]; \
2172 fputs ("\t.long ", FILE); \
2173 ASM_GENERATE_INTERNAL_LABEL (buf, "L", VALUE); \
2174 assemble_name (FILE, buf); \
2176 ASM_GENERATE_INTERNAL_LABEL (buf, "L", REL); \
2177 assemble_name (FILE, buf); \
2178 putc ('\n', FILE); \
2181 /* This is how to output an assembler line
2182 that says to advance the location counter
2183 to a multiple of 2**LOG bytes. */
2185 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
2187 fprintf (FILE, "\t.align %d\n", (LOG))
2189 /* Pick up the return address upon entry to a procedure. Used for
2190 dwarf2 unwind information. This also enables the table driven
2193 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LINK_REGISTER_REGNUM)
2194 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LINK_REGISTER_REGNUM)
2196 /* Describe how we implement __builtin_eh_return. */
2197 #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + 3 : INVALID_REGNUM)
2198 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 10)
2200 /* Print operand X (an rtx) in assembler syntax to file FILE.
2201 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2202 For `%' followed by punctuation, CODE is the punctuation and X is null. */
2204 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
2206 /* Define which CODE values are valid. */
2208 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
2209 ((CODE) == '.' || (CODE) == '&')
2211 /* Print a memory address as an operand to reference that memory location. */
2213 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)
2215 /* uncomment for disabling the corresponding default options */
2216 /* #define MACHINE_no_sched_interblock */
2217 /* #define MACHINE_no_sched_speculative */
2218 /* #define MACHINE_no_sched_speculative_load */
2220 /* General flags. */
2221 extern int flag_pic;
2222 extern int optimize;
2223 extern int flag_expensive_optimizations;
2224 extern int frame_pointer_needed;
2226 enum rs6000_builtins
2228 /* AltiVec builtins. */
2229 ALTIVEC_BUILTIN_ST_INTERNAL_4si,
2230 ALTIVEC_BUILTIN_LD_INTERNAL_4si,
2231 ALTIVEC_BUILTIN_ST_INTERNAL_8hi,
2232 ALTIVEC_BUILTIN_LD_INTERNAL_8hi,
2233 ALTIVEC_BUILTIN_ST_INTERNAL_16qi,
2234 ALTIVEC_BUILTIN_LD_INTERNAL_16qi,
2235 ALTIVEC_BUILTIN_ST_INTERNAL_4sf,
2236 ALTIVEC_BUILTIN_LD_INTERNAL_4sf,
2237 ALTIVEC_BUILTIN_VADDUBM,
2238 ALTIVEC_BUILTIN_VADDUHM,
2239 ALTIVEC_BUILTIN_VADDUWM,
2240 ALTIVEC_BUILTIN_VADDFP,
2241 ALTIVEC_BUILTIN_VADDCUW,
2242 ALTIVEC_BUILTIN_VADDUBS,
2243 ALTIVEC_BUILTIN_VADDSBS,
2244 ALTIVEC_BUILTIN_VADDUHS,
2245 ALTIVEC_BUILTIN_VADDSHS,
2246 ALTIVEC_BUILTIN_VADDUWS,
2247 ALTIVEC_BUILTIN_VADDSWS,
2248 ALTIVEC_BUILTIN_VAND,
2249 ALTIVEC_BUILTIN_VANDC,
2250 ALTIVEC_BUILTIN_VAVGUB,
2251 ALTIVEC_BUILTIN_VAVGSB,
2252 ALTIVEC_BUILTIN_VAVGUH,
2253 ALTIVEC_BUILTIN_VAVGSH,
2254 ALTIVEC_BUILTIN_VAVGUW,
2255 ALTIVEC_BUILTIN_VAVGSW,
2256 ALTIVEC_BUILTIN_VCFUX,
2257 ALTIVEC_BUILTIN_VCFSX,
2258 ALTIVEC_BUILTIN_VCTSXS,
2259 ALTIVEC_BUILTIN_VCTUXS,
2260 ALTIVEC_BUILTIN_VCMPBFP,
2261 ALTIVEC_BUILTIN_VCMPEQUB,
2262 ALTIVEC_BUILTIN_VCMPEQUH,
2263 ALTIVEC_BUILTIN_VCMPEQUW,
2264 ALTIVEC_BUILTIN_VCMPEQFP,
2265 ALTIVEC_BUILTIN_VCMPGEFP,
2266 ALTIVEC_BUILTIN_VCMPGTUB,
2267 ALTIVEC_BUILTIN_VCMPGTSB,
2268 ALTIVEC_BUILTIN_VCMPGTUH,
2269 ALTIVEC_BUILTIN_VCMPGTSH,
2270 ALTIVEC_BUILTIN_VCMPGTUW,
2271 ALTIVEC_BUILTIN_VCMPGTSW,
2272 ALTIVEC_BUILTIN_VCMPGTFP,
2273 ALTIVEC_BUILTIN_VEXPTEFP,
2274 ALTIVEC_BUILTIN_VLOGEFP,
2275 ALTIVEC_BUILTIN_VMADDFP,
2276 ALTIVEC_BUILTIN_VMAXUB,
2277 ALTIVEC_BUILTIN_VMAXSB,
2278 ALTIVEC_BUILTIN_VMAXUH,
2279 ALTIVEC_BUILTIN_VMAXSH,
2280 ALTIVEC_BUILTIN_VMAXUW,
2281 ALTIVEC_BUILTIN_VMAXSW,
2282 ALTIVEC_BUILTIN_VMAXFP,
2283 ALTIVEC_BUILTIN_VMHADDSHS,
2284 ALTIVEC_BUILTIN_VMHRADDSHS,
2285 ALTIVEC_BUILTIN_VMLADDUHM,
2286 ALTIVEC_BUILTIN_VMRGHB,
2287 ALTIVEC_BUILTIN_VMRGHH,
2288 ALTIVEC_BUILTIN_VMRGHW,
2289 ALTIVEC_BUILTIN_VMRGLB,
2290 ALTIVEC_BUILTIN_VMRGLH,
2291 ALTIVEC_BUILTIN_VMRGLW,
2292 ALTIVEC_BUILTIN_VMSUMUBM,
2293 ALTIVEC_BUILTIN_VMSUMMBM,
2294 ALTIVEC_BUILTIN_VMSUMUHM,
2295 ALTIVEC_BUILTIN_VMSUMSHM,
2296 ALTIVEC_BUILTIN_VMSUMUHS,
2297 ALTIVEC_BUILTIN_VMSUMSHS,
2298 ALTIVEC_BUILTIN_VMINUB,
2299 ALTIVEC_BUILTIN_VMINSB,
2300 ALTIVEC_BUILTIN_VMINUH,
2301 ALTIVEC_BUILTIN_VMINSH,
2302 ALTIVEC_BUILTIN_VMINUW,
2303 ALTIVEC_BUILTIN_VMINSW,
2304 ALTIVEC_BUILTIN_VMINFP,
2305 ALTIVEC_BUILTIN_VMULEUB,
2306 ALTIVEC_BUILTIN_VMULESB,
2307 ALTIVEC_BUILTIN_VMULEUH,
2308 ALTIVEC_BUILTIN_VMULESH,
2309 ALTIVEC_BUILTIN_VMULOUB,
2310 ALTIVEC_BUILTIN_VMULOSB,
2311 ALTIVEC_BUILTIN_VMULOUH,
2312 ALTIVEC_BUILTIN_VMULOSH,
2313 ALTIVEC_BUILTIN_VNMSUBFP,
2314 ALTIVEC_BUILTIN_VNOR,
2315 ALTIVEC_BUILTIN_VOR,
2316 ALTIVEC_BUILTIN_VSEL_4SI,
2317 ALTIVEC_BUILTIN_VSEL_4SF,
2318 ALTIVEC_BUILTIN_VSEL_8HI,
2319 ALTIVEC_BUILTIN_VSEL_16QI,
2320 ALTIVEC_BUILTIN_VPERM_4SI,
2321 ALTIVEC_BUILTIN_VPERM_4SF,
2322 ALTIVEC_BUILTIN_VPERM_8HI,
2323 ALTIVEC_BUILTIN_VPERM_16QI,
2324 ALTIVEC_BUILTIN_VPKUHUM,
2325 ALTIVEC_BUILTIN_VPKUWUM,
2326 ALTIVEC_BUILTIN_VPKPX,
2327 ALTIVEC_BUILTIN_VPKUHSS,
2328 ALTIVEC_BUILTIN_VPKSHSS,
2329 ALTIVEC_BUILTIN_VPKUWSS,
2330 ALTIVEC_BUILTIN_VPKSWSS,
2331 ALTIVEC_BUILTIN_VPKUHUS,
2332 ALTIVEC_BUILTIN_VPKSHUS,
2333 ALTIVEC_BUILTIN_VPKUWUS,
2334 ALTIVEC_BUILTIN_VPKSWUS,
2335 ALTIVEC_BUILTIN_VREFP,
2336 ALTIVEC_BUILTIN_VRFIM,
2337 ALTIVEC_BUILTIN_VRFIN,
2338 ALTIVEC_BUILTIN_VRFIP,
2339 ALTIVEC_BUILTIN_VRFIZ,
2340 ALTIVEC_BUILTIN_VRLB,
2341 ALTIVEC_BUILTIN_VRLH,
2342 ALTIVEC_BUILTIN_VRLW,
2343 ALTIVEC_BUILTIN_VRSQRTEFP,
2344 ALTIVEC_BUILTIN_VSLB,
2345 ALTIVEC_BUILTIN_VSLH,
2346 ALTIVEC_BUILTIN_VSLW,
2347 ALTIVEC_BUILTIN_VSL,
2348 ALTIVEC_BUILTIN_VSLO,
2349 ALTIVEC_BUILTIN_VSPLTB,
2350 ALTIVEC_BUILTIN_VSPLTH,
2351 ALTIVEC_BUILTIN_VSPLTW,
2352 ALTIVEC_BUILTIN_VSPLTISB,
2353 ALTIVEC_BUILTIN_VSPLTISH,
2354 ALTIVEC_BUILTIN_VSPLTISW,
2355 ALTIVEC_BUILTIN_VSRB,
2356 ALTIVEC_BUILTIN_VSRH,
2357 ALTIVEC_BUILTIN_VSRW,
2358 ALTIVEC_BUILTIN_VSRAB,
2359 ALTIVEC_BUILTIN_VSRAH,
2360 ALTIVEC_BUILTIN_VSRAW,
2361 ALTIVEC_BUILTIN_VSR,
2362 ALTIVEC_BUILTIN_VSRO,
2363 ALTIVEC_BUILTIN_VSUBUBM,
2364 ALTIVEC_BUILTIN_VSUBUHM,
2365 ALTIVEC_BUILTIN_VSUBUWM,
2366 ALTIVEC_BUILTIN_VSUBFP,
2367 ALTIVEC_BUILTIN_VSUBCUW,
2368 ALTIVEC_BUILTIN_VSUBUBS,
2369 ALTIVEC_BUILTIN_VSUBSBS,
2370 ALTIVEC_BUILTIN_VSUBUHS,
2371 ALTIVEC_BUILTIN_VSUBSHS,
2372 ALTIVEC_BUILTIN_VSUBUWS,
2373 ALTIVEC_BUILTIN_VSUBSWS,
2374 ALTIVEC_BUILTIN_VSUM4UBS,
2375 ALTIVEC_BUILTIN_VSUM4SBS,
2376 ALTIVEC_BUILTIN_VSUM4SHS,
2377 ALTIVEC_BUILTIN_VSUM2SWS,
2378 ALTIVEC_BUILTIN_VSUMSWS,
2379 ALTIVEC_BUILTIN_VXOR,
2380 ALTIVEC_BUILTIN_VSLDOI_16QI,
2381 ALTIVEC_BUILTIN_VSLDOI_8HI,
2382 ALTIVEC_BUILTIN_VSLDOI_4SI,
2383 ALTIVEC_BUILTIN_VSLDOI_4SF,
2384 ALTIVEC_BUILTIN_VUPKHSB,
2385 ALTIVEC_BUILTIN_VUPKHPX,
2386 ALTIVEC_BUILTIN_VUPKHSH,
2387 ALTIVEC_BUILTIN_VUPKLSB,
2388 ALTIVEC_BUILTIN_VUPKLPX,
2389 ALTIVEC_BUILTIN_VUPKLSH,
2390 ALTIVEC_BUILTIN_MTVSCR,
2391 ALTIVEC_BUILTIN_MFVSCR,
2392 ALTIVEC_BUILTIN_DSSALL,
2393 ALTIVEC_BUILTIN_DSS,
2394 ALTIVEC_BUILTIN_LVSL,
2395 ALTIVEC_BUILTIN_LVSR,
2396 ALTIVEC_BUILTIN_DSTT,
2397 ALTIVEC_BUILTIN_DSTST,
2398 ALTIVEC_BUILTIN_DSTSTT,
2399 ALTIVEC_BUILTIN_DST,
2400 ALTIVEC_BUILTIN_LVEBX,
2401 ALTIVEC_BUILTIN_LVEHX,
2402 ALTIVEC_BUILTIN_LVEWX,
2403 ALTIVEC_BUILTIN_LVXL,
2404 ALTIVEC_BUILTIN_LVX,
2405 ALTIVEC_BUILTIN_STVX,
2406 ALTIVEC_BUILTIN_STVEBX,
2407 ALTIVEC_BUILTIN_STVEHX,
2408 ALTIVEC_BUILTIN_STVEWX,
2409 ALTIVEC_BUILTIN_STVXL,
2410 ALTIVEC_BUILTIN_VCMPBFP_P,
2411 ALTIVEC_BUILTIN_VCMPEQFP_P,
2412 ALTIVEC_BUILTIN_VCMPEQUB_P,
2413 ALTIVEC_BUILTIN_VCMPEQUH_P,
2414 ALTIVEC_BUILTIN_VCMPEQUW_P,
2415 ALTIVEC_BUILTIN_VCMPGEFP_P,
2416 ALTIVEC_BUILTIN_VCMPGTFP_P,
2417 ALTIVEC_BUILTIN_VCMPGTSB_P,
2418 ALTIVEC_BUILTIN_VCMPGTSH_P,
2419 ALTIVEC_BUILTIN_VCMPGTSW_P,
2420 ALTIVEC_BUILTIN_VCMPGTUB_P,
2421 ALTIVEC_BUILTIN_VCMPGTUH_P,
2422 ALTIVEC_BUILTIN_VCMPGTUW_P,
2423 ALTIVEC_BUILTIN_ABSS_V4SI,
2424 ALTIVEC_BUILTIN_ABSS_V8HI,
2425 ALTIVEC_BUILTIN_ABSS_V16QI,
2426 ALTIVEC_BUILTIN_ABS_V4SI,
2427 ALTIVEC_BUILTIN_ABS_V4SF,
2428 ALTIVEC_BUILTIN_ABS_V8HI,
2429 ALTIVEC_BUILTIN_ABS_V16QI,
2430 ALTIVEC_BUILTIN_MASK_FOR_LOAD,
2431 ALTIVEC_BUILTIN_MASK_FOR_STORE,
2432 ALTIVEC_BUILTIN_VEC_INIT_V4SI,
2433 ALTIVEC_BUILTIN_VEC_INIT_V8HI,
2434 ALTIVEC_BUILTIN_VEC_INIT_V16QI,
2435 ALTIVEC_BUILTIN_VEC_INIT_V4SF,
2436 ALTIVEC_BUILTIN_VEC_SET_V4SI,
2437 ALTIVEC_BUILTIN_VEC_SET_V8HI,
2438 ALTIVEC_BUILTIN_VEC_SET_V16QI,
2439 ALTIVEC_BUILTIN_VEC_SET_V4SF,
2440 ALTIVEC_BUILTIN_VEC_EXT_V4SI,
2441 ALTIVEC_BUILTIN_VEC_EXT_V8HI,
2442 ALTIVEC_BUILTIN_VEC_EXT_V16QI,
2443 ALTIVEC_BUILTIN_VEC_EXT_V4SF,
2445 /* Altivec overloaded builtins. */
2446 ALTIVEC_BUILTIN_VCMPEQ_P,
2447 ALTIVEC_BUILTIN_OVERLOADED_FIRST = ALTIVEC_BUILTIN_VCMPEQ_P,
2448 ALTIVEC_BUILTIN_VCMPGT_P,
2449 ALTIVEC_BUILTIN_VCMPGE_P,
2450 ALTIVEC_BUILTIN_VEC_ABS,
2451 ALTIVEC_BUILTIN_VEC_ABSS,
2452 ALTIVEC_BUILTIN_VEC_ADD,
2453 ALTIVEC_BUILTIN_VEC_ADDC,
2454 ALTIVEC_BUILTIN_VEC_ADDS,
2455 ALTIVEC_BUILTIN_VEC_AND,
2456 ALTIVEC_BUILTIN_VEC_ANDC,
2457 ALTIVEC_BUILTIN_VEC_AVG,
2458 ALTIVEC_BUILTIN_VEC_CEIL,
2459 ALTIVEC_BUILTIN_VEC_CMPB,
2460 ALTIVEC_BUILTIN_VEC_CMPEQ,
2461 ALTIVEC_BUILTIN_VEC_CMPEQUB,
2462 ALTIVEC_BUILTIN_VEC_CMPEQUH,
2463 ALTIVEC_BUILTIN_VEC_CMPEQUW,
2464 ALTIVEC_BUILTIN_VEC_CMPGE,
2465 ALTIVEC_BUILTIN_VEC_CMPGT,
2466 ALTIVEC_BUILTIN_VEC_CMPLE,
2467 ALTIVEC_BUILTIN_VEC_CMPLT,
2468 ALTIVEC_BUILTIN_VEC_CTF,
2469 ALTIVEC_BUILTIN_VEC_CTS,
2470 ALTIVEC_BUILTIN_VEC_CTU,
2471 ALTIVEC_BUILTIN_VEC_DST,
2472 ALTIVEC_BUILTIN_VEC_DSTST,
2473 ALTIVEC_BUILTIN_VEC_DSTSTT,
2474 ALTIVEC_BUILTIN_VEC_DSTT,
2475 ALTIVEC_BUILTIN_VEC_EXPTE,
2476 ALTIVEC_BUILTIN_VEC_FLOOR,
2477 ALTIVEC_BUILTIN_VEC_LD,
2478 ALTIVEC_BUILTIN_VEC_LDE,
2479 ALTIVEC_BUILTIN_VEC_LDL,
2480 ALTIVEC_BUILTIN_VEC_LOGE,
2481 ALTIVEC_BUILTIN_VEC_LVEBX,
2482 ALTIVEC_BUILTIN_VEC_LVEHX,
2483 ALTIVEC_BUILTIN_VEC_LVEWX,
2484 ALTIVEC_BUILTIN_VEC_LVSL,
2485 ALTIVEC_BUILTIN_VEC_LVSR,
2486 ALTIVEC_BUILTIN_VEC_MADD,
2487 ALTIVEC_BUILTIN_VEC_MADDS,
2488 ALTIVEC_BUILTIN_VEC_MAX,
2489 ALTIVEC_BUILTIN_VEC_MERGEH,
2490 ALTIVEC_BUILTIN_VEC_MERGEL,
2491 ALTIVEC_BUILTIN_VEC_MIN,
2492 ALTIVEC_BUILTIN_VEC_MLADD,
2493 ALTIVEC_BUILTIN_VEC_MPERM,
2494 ALTIVEC_BUILTIN_VEC_MRADDS,
2495 ALTIVEC_BUILTIN_VEC_MRGHB,
2496 ALTIVEC_BUILTIN_VEC_MRGHH,
2497 ALTIVEC_BUILTIN_VEC_MRGHW,
2498 ALTIVEC_BUILTIN_VEC_MRGLB,
2499 ALTIVEC_BUILTIN_VEC_MRGLH,
2500 ALTIVEC_BUILTIN_VEC_MRGLW,
2501 ALTIVEC_BUILTIN_VEC_MSUM,
2502 ALTIVEC_BUILTIN_VEC_MSUMS,
2503 ALTIVEC_BUILTIN_VEC_MTVSCR,
2504 ALTIVEC_BUILTIN_VEC_MULE,
2505 ALTIVEC_BUILTIN_VEC_MULO,
2506 ALTIVEC_BUILTIN_VEC_NMSUB,
2507 ALTIVEC_BUILTIN_VEC_NOR,
2508 ALTIVEC_BUILTIN_VEC_OR,
2509 ALTIVEC_BUILTIN_VEC_PACK,
2510 ALTIVEC_BUILTIN_VEC_PACKPX,
2511 ALTIVEC_BUILTIN_VEC_PACKS,
2512 ALTIVEC_BUILTIN_VEC_PACKSU,
2513 ALTIVEC_BUILTIN_VEC_PERM,
2514 ALTIVEC_BUILTIN_VEC_RE,
2515 ALTIVEC_BUILTIN_VEC_RL,
2516 ALTIVEC_BUILTIN_VEC_ROUND,
2517 ALTIVEC_BUILTIN_VEC_RSQRTE,
2518 ALTIVEC_BUILTIN_VEC_SEL,
2519 ALTIVEC_BUILTIN_VEC_SL,
2520 ALTIVEC_BUILTIN_VEC_SLD,
2521 ALTIVEC_BUILTIN_VEC_SLL,
2522 ALTIVEC_BUILTIN_VEC_SLO,
2523 ALTIVEC_BUILTIN_VEC_SPLAT,
2524 ALTIVEC_BUILTIN_VEC_SPLAT_S16,
2525 ALTIVEC_BUILTIN_VEC_SPLAT_S32,
2526 ALTIVEC_BUILTIN_VEC_SPLAT_S8,
2527 ALTIVEC_BUILTIN_VEC_SPLAT_U16,
2528 ALTIVEC_BUILTIN_VEC_SPLAT_U32,
2529 ALTIVEC_BUILTIN_VEC_SPLAT_U8,
2530 ALTIVEC_BUILTIN_VEC_SPLTB,
2531 ALTIVEC_BUILTIN_VEC_SPLTH,
2532 ALTIVEC_BUILTIN_VEC_SPLTW,
2533 ALTIVEC_BUILTIN_VEC_SR,
2534 ALTIVEC_BUILTIN_VEC_SRA,
2535 ALTIVEC_BUILTIN_VEC_SRL,
2536 ALTIVEC_BUILTIN_VEC_SRO,
2537 ALTIVEC_BUILTIN_VEC_ST,
2538 ALTIVEC_BUILTIN_VEC_STE,
2539 ALTIVEC_BUILTIN_VEC_STL,
2540 ALTIVEC_BUILTIN_VEC_STVEBX,
2541 ALTIVEC_BUILTIN_VEC_STVEHX,
2542 ALTIVEC_BUILTIN_VEC_STVEWX,
2543 ALTIVEC_BUILTIN_VEC_SUB,
2544 ALTIVEC_BUILTIN_VEC_SUBC,
2545 ALTIVEC_BUILTIN_VEC_SUBS,
2546 ALTIVEC_BUILTIN_VEC_SUM2S,
2547 ALTIVEC_BUILTIN_VEC_SUM4S,
2548 ALTIVEC_BUILTIN_VEC_SUMS,
2549 ALTIVEC_BUILTIN_VEC_TRUNC,
2550 ALTIVEC_BUILTIN_VEC_UNPACKH,
2551 ALTIVEC_BUILTIN_VEC_UNPACKL,
2552 ALTIVEC_BUILTIN_VEC_VADDFP,
2553 ALTIVEC_BUILTIN_VEC_VADDSBS,
2554 ALTIVEC_BUILTIN_VEC_VADDSHS,
2555 ALTIVEC_BUILTIN_VEC_VADDSWS,
2556 ALTIVEC_BUILTIN_VEC_VADDUBM,
2557 ALTIVEC_BUILTIN_VEC_VADDUBS,
2558 ALTIVEC_BUILTIN_VEC_VADDUHM,
2559 ALTIVEC_BUILTIN_VEC_VADDUHS,
2560 ALTIVEC_BUILTIN_VEC_VADDUWM,
2561 ALTIVEC_BUILTIN_VEC_VADDUWS,
2562 ALTIVEC_BUILTIN_VEC_VAVGSB,
2563 ALTIVEC_BUILTIN_VEC_VAVGSH,
2564 ALTIVEC_BUILTIN_VEC_VAVGSW,
2565 ALTIVEC_BUILTIN_VEC_VAVGUB,
2566 ALTIVEC_BUILTIN_VEC_VAVGUH,
2567 ALTIVEC_BUILTIN_VEC_VAVGUW,
2568 ALTIVEC_BUILTIN_VEC_VCFSX,
2569 ALTIVEC_BUILTIN_VEC_VCFUX,
2570 ALTIVEC_BUILTIN_VEC_VCMPEQFP,
2571 ALTIVEC_BUILTIN_VEC_VCMPEQUB,
2572 ALTIVEC_BUILTIN_VEC_VCMPEQUH,
2573 ALTIVEC_BUILTIN_VEC_VCMPEQUW,
2574 ALTIVEC_BUILTIN_VEC_VCMPGTFP,
2575 ALTIVEC_BUILTIN_VEC_VCMPGTSB,
2576 ALTIVEC_BUILTIN_VEC_VCMPGTSH,
2577 ALTIVEC_BUILTIN_VEC_VCMPGTSW,
2578 ALTIVEC_BUILTIN_VEC_VCMPGTUB,
2579 ALTIVEC_BUILTIN_VEC_VCMPGTUH,
2580 ALTIVEC_BUILTIN_VEC_VCMPGTUW,
2581 ALTIVEC_BUILTIN_VEC_VMAXFP,
2582 ALTIVEC_BUILTIN_VEC_VMAXSB,
2583 ALTIVEC_BUILTIN_VEC_VMAXSH,
2584 ALTIVEC_BUILTIN_VEC_VMAXSW,
2585 ALTIVEC_BUILTIN_VEC_VMAXUB,
2586 ALTIVEC_BUILTIN_VEC_VMAXUH,
2587 ALTIVEC_BUILTIN_VEC_VMAXUW,
2588 ALTIVEC_BUILTIN_VEC_VMINFP,
2589 ALTIVEC_BUILTIN_VEC_VMINSB,
2590 ALTIVEC_BUILTIN_VEC_VMINSH,
2591 ALTIVEC_BUILTIN_VEC_VMINSW,
2592 ALTIVEC_BUILTIN_VEC_VMINUB,
2593 ALTIVEC_BUILTIN_VEC_VMINUH,
2594 ALTIVEC_BUILTIN_VEC_VMINUW,
2595 ALTIVEC_BUILTIN_VEC_VMRGHB,
2596 ALTIVEC_BUILTIN_VEC_VMRGHH,
2597 ALTIVEC_BUILTIN_VEC_VMRGHW,
2598 ALTIVEC_BUILTIN_VEC_VMRGLB,
2599 ALTIVEC_BUILTIN_VEC_VMRGLH,
2600 ALTIVEC_BUILTIN_VEC_VMRGLW,
2601 ALTIVEC_BUILTIN_VEC_VMSUMMBM,
2602 ALTIVEC_BUILTIN_VEC_VMSUMSHM,
2603 ALTIVEC_BUILTIN_VEC_VMSUMSHS,
2604 ALTIVEC_BUILTIN_VEC_VMSUMUBM,
2605 ALTIVEC_BUILTIN_VEC_VMSUMUHM,
2606 ALTIVEC_BUILTIN_VEC_VMSUMUHS,
2607 ALTIVEC_BUILTIN_VEC_VMULESB,
2608 ALTIVEC_BUILTIN_VEC_VMULESH,
2609 ALTIVEC_BUILTIN_VEC_VMULEUB,
2610 ALTIVEC_BUILTIN_VEC_VMULEUH,
2611 ALTIVEC_BUILTIN_VEC_VMULOSB,
2612 ALTIVEC_BUILTIN_VEC_VMULOSH,
2613 ALTIVEC_BUILTIN_VEC_VMULOUB,
2614 ALTIVEC_BUILTIN_VEC_VMULOUH,
2615 ALTIVEC_BUILTIN_VEC_VPKSHSS,
2616 ALTIVEC_BUILTIN_VEC_VPKSHUS,
2617 ALTIVEC_BUILTIN_VEC_VPKSWSS,
2618 ALTIVEC_BUILTIN_VEC_VPKSWUS,
2619 ALTIVEC_BUILTIN_VEC_VPKUHUM,
2620 ALTIVEC_BUILTIN_VEC_VPKUHUS,
2621 ALTIVEC_BUILTIN_VEC_VPKUWUM,
2622 ALTIVEC_BUILTIN_VEC_VPKUWUS,
2623 ALTIVEC_BUILTIN_VEC_VRLB,
2624 ALTIVEC_BUILTIN_VEC_VRLH,
2625 ALTIVEC_BUILTIN_VEC_VRLW,
2626 ALTIVEC_BUILTIN_VEC_VSLB,
2627 ALTIVEC_BUILTIN_VEC_VSLH,
2628 ALTIVEC_BUILTIN_VEC_VSLW,
2629 ALTIVEC_BUILTIN_VEC_VSPLTB,
2630 ALTIVEC_BUILTIN_VEC_VSPLTH,
2631 ALTIVEC_BUILTIN_VEC_VSPLTW,
2632 ALTIVEC_BUILTIN_VEC_VSRAB,
2633 ALTIVEC_BUILTIN_VEC_VSRAH,
2634 ALTIVEC_BUILTIN_VEC_VSRAW,
2635 ALTIVEC_BUILTIN_VEC_VSRB,
2636 ALTIVEC_BUILTIN_VEC_VSRH,
2637 ALTIVEC_BUILTIN_VEC_VSRW,
2638 ALTIVEC_BUILTIN_VEC_VSUBFP,
2639 ALTIVEC_BUILTIN_VEC_VSUBSBS,
2640 ALTIVEC_BUILTIN_VEC_VSUBSHS,
2641 ALTIVEC_BUILTIN_VEC_VSUBSWS,
2642 ALTIVEC_BUILTIN_VEC_VSUBUBM,
2643 ALTIVEC_BUILTIN_VEC_VSUBUBS,
2644 ALTIVEC_BUILTIN_VEC_VSUBUHM,
2645 ALTIVEC_BUILTIN_VEC_VSUBUHS,
2646 ALTIVEC_BUILTIN_VEC_VSUBUWM,
2647 ALTIVEC_BUILTIN_VEC_VSUBUWS,
2648 ALTIVEC_BUILTIN_VEC_VSUM4SBS,
2649 ALTIVEC_BUILTIN_VEC_VSUM4SHS,
2650 ALTIVEC_BUILTIN_VEC_VSUM4UBS,
2651 ALTIVEC_BUILTIN_VEC_VUPKHPX,
2652 ALTIVEC_BUILTIN_VEC_VUPKHSB,
2653 ALTIVEC_BUILTIN_VEC_VUPKHSH,
2654 ALTIVEC_BUILTIN_VEC_VUPKLPX,
2655 ALTIVEC_BUILTIN_VEC_VUPKLSB,
2656 ALTIVEC_BUILTIN_VEC_VUPKLSH,
2657 ALTIVEC_BUILTIN_VEC_XOR,
2658 ALTIVEC_BUILTIN_VEC_STEP,
2659 ALTIVEC_BUILTIN_OVERLOADED_LAST = ALTIVEC_BUILTIN_VEC_STEP,
2665 SPE_BUILTIN_EVDIVWS,
2666 SPE_BUILTIN_EVDIVWU,
2668 SPE_BUILTIN_EVFSADD,
2669 SPE_BUILTIN_EVFSDIV,
2670 SPE_BUILTIN_EVFSMUL,
2671 SPE_BUILTIN_EVFSSUB,
2675 SPE_BUILTIN_EVLHHESPLATX,
2676 SPE_BUILTIN_EVLHHOSSPLATX,
2677 SPE_BUILTIN_EVLHHOUSPLATX,
2678 SPE_BUILTIN_EVLWHEX,
2679 SPE_BUILTIN_EVLWHOSX,
2680 SPE_BUILTIN_EVLWHOUX,
2681 SPE_BUILTIN_EVLWHSPLATX,
2682 SPE_BUILTIN_EVLWWSPLATX,
2683 SPE_BUILTIN_EVMERGEHI,
2684 SPE_BUILTIN_EVMERGEHILO,
2685 SPE_BUILTIN_EVMERGELO,
2686 SPE_BUILTIN_EVMERGELOHI,
2687 SPE_BUILTIN_EVMHEGSMFAA,
2688 SPE_BUILTIN_EVMHEGSMFAN,
2689 SPE_BUILTIN_EVMHEGSMIAA,
2690 SPE_BUILTIN_EVMHEGSMIAN,
2691 SPE_BUILTIN_EVMHEGUMIAA,
2692 SPE_BUILTIN_EVMHEGUMIAN,
2693 SPE_BUILTIN_EVMHESMF,
2694 SPE_BUILTIN_EVMHESMFA,
2695 SPE_BUILTIN_EVMHESMFAAW,
2696 SPE_BUILTIN_EVMHESMFANW,
2697 SPE_BUILTIN_EVMHESMI,
2698 SPE_BUILTIN_EVMHESMIA,
2699 SPE_BUILTIN_EVMHESMIAAW,
2700 SPE_BUILTIN_EVMHESMIANW,
2701 SPE_BUILTIN_EVMHESSF,
2702 SPE_BUILTIN_EVMHESSFA,
2703 SPE_BUILTIN_EVMHESSFAAW,
2704 SPE_BUILTIN_EVMHESSFANW,
2705 SPE_BUILTIN_EVMHESSIAAW,
2706 SPE_BUILTIN_EVMHESSIANW,
2707 SPE_BUILTIN_EVMHEUMI,
2708 SPE_BUILTIN_EVMHEUMIA,
2709 SPE_BUILTIN_EVMHEUMIAAW,
2710 SPE_BUILTIN_EVMHEUMIANW,
2711 SPE_BUILTIN_EVMHEUSIAAW,
2712 SPE_BUILTIN_EVMHEUSIANW,
2713 SPE_BUILTIN_EVMHOGSMFAA,
2714 SPE_BUILTIN_EVMHOGSMFAN,
2715 SPE_BUILTIN_EVMHOGSMIAA,
2716 SPE_BUILTIN_EVMHOGSMIAN,
2717 SPE_BUILTIN_EVMHOGUMIAA,
2718 SPE_BUILTIN_EVMHOGUMIAN,
2719 SPE_BUILTIN_EVMHOSMF,
2720 SPE_BUILTIN_EVMHOSMFA,
2721 SPE_BUILTIN_EVMHOSMFAAW,
2722 SPE_BUILTIN_EVMHOSMFANW,
2723 SPE_BUILTIN_EVMHOSMI,
2724 SPE_BUILTIN_EVMHOSMIA,
2725 SPE_BUILTIN_EVMHOSMIAAW,
2726 SPE_BUILTIN_EVMHOSMIANW,
2727 SPE_BUILTIN_EVMHOSSF,
2728 SPE_BUILTIN_EVMHOSSFA,
2729 SPE_BUILTIN_EVMHOSSFAAW,
2730 SPE_BUILTIN_EVMHOSSFANW,
2731 SPE_BUILTIN_EVMHOSSIAAW,
2732 SPE_BUILTIN_EVMHOSSIANW,
2733 SPE_BUILTIN_EVMHOUMI,
2734 SPE_BUILTIN_EVMHOUMIA,
2735 SPE_BUILTIN_EVMHOUMIAAW,
2736 SPE_BUILTIN_EVMHOUMIANW,
2737 SPE_BUILTIN_EVMHOUSIAAW,
2738 SPE_BUILTIN_EVMHOUSIANW,
2739 SPE_BUILTIN_EVMWHSMF,
2740 SPE_BUILTIN_EVMWHSMFA,
2741 SPE_BUILTIN_EVMWHSMI,
2742 SPE_BUILTIN_EVMWHSMIA,
2743 SPE_BUILTIN_EVMWHSSF,
2744 SPE_BUILTIN_EVMWHSSFA,
2745 SPE_BUILTIN_EVMWHUMI,
2746 SPE_BUILTIN_EVMWHUMIA,
2747 SPE_BUILTIN_EVMWLSMIAAW,
2748 SPE_BUILTIN_EVMWLSMIANW,
2749 SPE_BUILTIN_EVMWLSSIAAW,
2750 SPE_BUILTIN_EVMWLSSIANW,
2751 SPE_BUILTIN_EVMWLUMI,
2752 SPE_BUILTIN_EVMWLUMIA,
2753 SPE_BUILTIN_EVMWLUMIAAW,
2754 SPE_BUILTIN_EVMWLUMIANW,
2755 SPE_BUILTIN_EVMWLUSIAAW,
2756 SPE_BUILTIN_EVMWLUSIANW,
2757 SPE_BUILTIN_EVMWSMF,
2758 SPE_BUILTIN_EVMWSMFA,
2759 SPE_BUILTIN_EVMWSMFAA,
2760 SPE_BUILTIN_EVMWSMFAN,
2761 SPE_BUILTIN_EVMWSMI,
2762 SPE_BUILTIN_EVMWSMIA,
2763 SPE_BUILTIN_EVMWSMIAA,
2764 SPE_BUILTIN_EVMWSMIAN,
2765 SPE_BUILTIN_EVMWHSSFAA,
2766 SPE_BUILTIN_EVMWSSF,
2767 SPE_BUILTIN_EVMWSSFA,
2768 SPE_BUILTIN_EVMWSSFAA,
2769 SPE_BUILTIN_EVMWSSFAN,
2770 SPE_BUILTIN_EVMWUMI,
2771 SPE_BUILTIN_EVMWUMIA,
2772 SPE_BUILTIN_EVMWUMIAA,
2773 SPE_BUILTIN_EVMWUMIAN,
2782 SPE_BUILTIN_EVSTDDX,
2783 SPE_BUILTIN_EVSTDHX,
2784 SPE_BUILTIN_EVSTDWX,
2785 SPE_BUILTIN_EVSTWHEX,
2786 SPE_BUILTIN_EVSTWHOX,
2787 SPE_BUILTIN_EVSTWWEX,
2788 SPE_BUILTIN_EVSTWWOX,
2789 SPE_BUILTIN_EVSUBFW,
2792 SPE_BUILTIN_EVADDSMIAAW,
2793 SPE_BUILTIN_EVADDSSIAAW,
2794 SPE_BUILTIN_EVADDUMIAAW,
2795 SPE_BUILTIN_EVADDUSIAAW,
2796 SPE_BUILTIN_EVCNTLSW,
2797 SPE_BUILTIN_EVCNTLZW,
2798 SPE_BUILTIN_EVEXTSB,
2799 SPE_BUILTIN_EVEXTSH,
2800 SPE_BUILTIN_EVFSABS,
2801 SPE_BUILTIN_EVFSCFSF,
2802 SPE_BUILTIN_EVFSCFSI,
2803 SPE_BUILTIN_EVFSCFUF,
2804 SPE_BUILTIN_EVFSCFUI,
2805 SPE_BUILTIN_EVFSCTSF,
2806 SPE_BUILTIN_EVFSCTSI,
2807 SPE_BUILTIN_EVFSCTSIZ,
2808 SPE_BUILTIN_EVFSCTUF,
2809 SPE_BUILTIN_EVFSCTUI,
2810 SPE_BUILTIN_EVFSCTUIZ,
2811 SPE_BUILTIN_EVFSNABS,
2812 SPE_BUILTIN_EVFSNEG,
2816 SPE_BUILTIN_EVSUBFSMIAAW,
2817 SPE_BUILTIN_EVSUBFSSIAAW,
2818 SPE_BUILTIN_EVSUBFUMIAAW,
2819 SPE_BUILTIN_EVSUBFUSIAAW,
2820 SPE_BUILTIN_EVADDIW,
2824 SPE_BUILTIN_EVLHHESPLAT,
2825 SPE_BUILTIN_EVLHHOSSPLAT,
2826 SPE_BUILTIN_EVLHHOUSPLAT,
2828 SPE_BUILTIN_EVLWHOS,
2829 SPE_BUILTIN_EVLWHOU,
2830 SPE_BUILTIN_EVLWHSPLAT,
2831 SPE_BUILTIN_EVLWWSPLAT,
2834 SPE_BUILTIN_EVSRWIS,
2835 SPE_BUILTIN_EVSRWIU,
2839 SPE_BUILTIN_EVSTWHE,
2840 SPE_BUILTIN_EVSTWHO,
2841 SPE_BUILTIN_EVSTWWE,
2842 SPE_BUILTIN_EVSTWWO,
2843 SPE_BUILTIN_EVSUBIFW,
2846 SPE_BUILTIN_EVCMPEQ,
2847 SPE_BUILTIN_EVCMPGTS,
2848 SPE_BUILTIN_EVCMPGTU,
2849 SPE_BUILTIN_EVCMPLTS,
2850 SPE_BUILTIN_EVCMPLTU,
2851 SPE_BUILTIN_EVFSCMPEQ,
2852 SPE_BUILTIN_EVFSCMPGT,
2853 SPE_BUILTIN_EVFSCMPLT,
2854 SPE_BUILTIN_EVFSTSTEQ,
2855 SPE_BUILTIN_EVFSTSTGT,
2856 SPE_BUILTIN_EVFSTSTLT,
2858 /* EVSEL compares. */
2859 SPE_BUILTIN_EVSEL_CMPEQ,
2860 SPE_BUILTIN_EVSEL_CMPGTS,
2861 SPE_BUILTIN_EVSEL_CMPGTU,
2862 SPE_BUILTIN_EVSEL_CMPLTS,
2863 SPE_BUILTIN_EVSEL_CMPLTU,
2864 SPE_BUILTIN_EVSEL_FSCMPEQ,
2865 SPE_BUILTIN_EVSEL_FSCMPGT,
2866 SPE_BUILTIN_EVSEL_FSCMPLT,
2867 SPE_BUILTIN_EVSEL_FSTSTEQ,
2868 SPE_BUILTIN_EVSEL_FSTSTGT,
2869 SPE_BUILTIN_EVSEL_FSTSTLT,
2871 SPE_BUILTIN_EVSPLATFI,
2872 SPE_BUILTIN_EVSPLATI,
2873 SPE_BUILTIN_EVMWHSSMAA,
2874 SPE_BUILTIN_EVMWHSMFAA,
2875 SPE_BUILTIN_EVMWHSMIAA,
2876 SPE_BUILTIN_EVMWHUSIAA,
2877 SPE_BUILTIN_EVMWHUMIAA,
2878 SPE_BUILTIN_EVMWHSSFAN,
2879 SPE_BUILTIN_EVMWHSSIAN,
2880 SPE_BUILTIN_EVMWHSMFAN,
2881 SPE_BUILTIN_EVMWHSMIAN,
2882 SPE_BUILTIN_EVMWHUSIAN,
2883 SPE_BUILTIN_EVMWHUMIAN,
2884 SPE_BUILTIN_EVMWHGSSFAA,
2885 SPE_BUILTIN_EVMWHGSMFAA,
2886 SPE_BUILTIN_EVMWHGSMIAA,
2887 SPE_BUILTIN_EVMWHGUMIAA,
2888 SPE_BUILTIN_EVMWHGSSFAN,
2889 SPE_BUILTIN_EVMWHGSMFAN,
2890 SPE_BUILTIN_EVMWHGSMIAN,
2891 SPE_BUILTIN_EVMWHGUMIAN,
2892 SPE_BUILTIN_MTSPEFSCR,
2893 SPE_BUILTIN_MFSPEFSCR,
2896 RS6000_BUILTIN_COUNT
2899 enum rs6000_builtin_type_index
2901 RS6000_BTI_NOT_OPAQUE,
2902 RS6000_BTI_opaque_V2SI,
2903 RS6000_BTI_opaque_V2SF,
2904 RS6000_BTI_opaque_p_V2SI,
2905 RS6000_BTI_opaque_V4SI,
2913 RS6000_BTI_unsigned_V16QI,
2914 RS6000_BTI_unsigned_V8HI,
2915 RS6000_BTI_unsigned_V4SI,
2916 RS6000_BTI_bool_char, /* __bool char */
2917 RS6000_BTI_bool_short, /* __bool short */
2918 RS6000_BTI_bool_int, /* __bool int */
2919 RS6000_BTI_pixel, /* __pixel */
2920 RS6000_BTI_bool_V16QI, /* __vector __bool char */
2921 RS6000_BTI_bool_V8HI, /* __vector __bool short */
2922 RS6000_BTI_bool_V4SI, /* __vector __bool int */
2923 RS6000_BTI_pixel_V8HI, /* __vector __pixel */
2924 RS6000_BTI_long, /* long_integer_type_node */
2925 RS6000_BTI_unsigned_long, /* long_unsigned_type_node */
2926 RS6000_BTI_INTQI, /* intQI_type_node */
2927 RS6000_BTI_UINTQI, /* unsigned_intQI_type_node */
2928 RS6000_BTI_INTHI, /* intHI_type_node */
2929 RS6000_BTI_UINTHI, /* unsigned_intHI_type_node */
2930 RS6000_BTI_INTSI, /* intSI_type_node */
2931 RS6000_BTI_UINTSI, /* unsigned_intSI_type_node */
2932 RS6000_BTI_float, /* float_type_node */
2933 RS6000_BTI_void, /* void_type_node */
2938 #define opaque_V2SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V2SI])
2939 #define opaque_V2SF_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V2SF])
2940 #define opaque_p_V2SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_p_V2SI])
2941 #define opaque_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V4SI])
2942 #define V16QI_type_node (rs6000_builtin_types[RS6000_BTI_V16QI])
2943 #define V2SI_type_node (rs6000_builtin_types[RS6000_BTI_V2SI])
2944 #define V2SF_type_node (rs6000_builtin_types[RS6000_BTI_V2SF])
2945 #define V4HI_type_node (rs6000_builtin_types[RS6000_BTI_V4HI])
2946 #define V4SI_type_node (rs6000_builtin_types[RS6000_BTI_V4SI])
2947 #define V4SF_type_node (rs6000_builtin_types[RS6000_BTI_V4SF])
2948 #define V8HI_type_node (rs6000_builtin_types[RS6000_BTI_V8HI])
2949 #define unsigned_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V16QI])
2950 #define unsigned_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V8HI])
2951 #define unsigned_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V4SI])
2952 #define bool_char_type_node (rs6000_builtin_types[RS6000_BTI_bool_char])
2953 #define bool_short_type_node (rs6000_builtin_types[RS6000_BTI_bool_short])
2954 #define bool_int_type_node (rs6000_builtin_types[RS6000_BTI_bool_int])
2955 #define pixel_type_node (rs6000_builtin_types[RS6000_BTI_pixel])
2956 #define bool_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V16QI])
2957 #define bool_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V8HI])
2958 #define bool_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V4SI])
2959 #define pixel_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_pixel_V8HI])
2961 #define long_integer_type_internal_node (rs6000_builtin_types[RS6000_BTI_long])
2962 #define long_unsigned_type_internal_node (rs6000_builtin_types[RS6000_BTI_unsigned_long])
2963 #define intQI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTQI])
2964 #define uintQI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTQI])
2965 #define intHI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTHI])
2966 #define uintHI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTHI])
2967 #define intSI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTSI])
2968 #define uintSI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTSI])
2969 #define float_type_internal_node (rs6000_builtin_types[RS6000_BTI_float])
2970 #define void_type_internal_node (rs6000_builtin_types[RS6000_BTI_void])
2972 extern GTY(()) tree rs6000_builtin_types[RS6000_BTI_MAX];
2973 extern GTY(()) tree rs6000_builtin_decls[RS6000_BUILTIN_COUNT];