1 /* Definitions of target machine for GNU compiler. MIPS version.
2 Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
3 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
4 Contributed by A. Lichnewsky (lich@inria.inria.fr).
5 Changed by Michael Meissner (meissner@osf.org).
6 64 bit r4000 support by Ian Lance Taylor (ian@cygnus.com) and
7 Brendan Eich (brendan@microunity.com).
9 This file is part of GCC.
11 GCC is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2, or (at your option)
16 GCC is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with GCC; see the file COPYING. If not, write to
23 the Free Software Foundation, 59 Temple Place - Suite 330,
24 Boston, MA 02111-1307, USA. */
27 /* Standard GCC variables that we reference. */
29 extern int target_flags;
31 /* MIPS external variables defined in mips.c. */
35 CMP_SI, /* compare four byte integers */
36 CMP_DI, /* compare eight byte integers */
37 CMP_SF, /* compare single precision floats */
38 CMP_DF, /* compare double precision floats */
39 CMP_MAX /* max comparison type */
42 /* Which processor to schedule for. Since there is no difference between
43 a R2000 and R3000 in terms of the scheduler, we collapse them into
44 just an R3000. The elements of the enumeration must match exactly
45 the cpu attribute in the mips.md machine description. */
73 /* Which ABI to use. ABI_32 (original 32, or o32), ABI_N32 (n32),
74 ABI_64 (n64) are all defined by SGI. ABI_O64 is o32 extended
75 to work on a 64 bit machine. */
83 /* Information about one recognized processor. Defined here for the
84 benefit of TARGET_CPU_CPP_BUILTINS. */
85 struct mips_cpu_info {
86 /* The 'canonical' name of the processor as far as GCC is concerned.
87 It's typically a manufacturer's prefix followed by a numerical
88 designation. It should be lower case. */
91 /* The internal processor number that most closely matches this
92 entry. Several processors can have the same value, if there's no
93 difference between them from GCC's point of view. */
94 enum processor_type cpu;
96 /* The ISA level that the processor implements. */
100 extern char mips_reg_names[][8]; /* register names (a0 vs. $4). */
101 extern char mips_print_operand_punct[256]; /* print_operand punctuation chars */
102 extern const char *current_function_file; /* filename current function is in */
103 extern int num_source_filenames; /* current .file # */
104 extern int mips_section_threshold; /* # bytes of data/sdata cutoff */
105 extern int sym_lineno; /* sgi next label # for each stmt */
106 extern int set_noreorder; /* # of nested .set noreorder's */
107 extern int set_nomacro; /* # of nested .set nomacro's */
108 extern int set_noat; /* # of nested .set noat's */
109 extern int set_volatile; /* # of nested .set volatile's */
110 extern int mips_branch_likely; /* emit 'l' after br (branch likely) */
111 extern int mips_dbx_regno[]; /* Map register # to debug register # */
112 extern GTY(()) rtx branch_cmp[2]; /* operands for compare */
113 extern enum cmp_type branch_type; /* what type of branch to use */
114 extern enum processor_type mips_arch; /* which cpu to codegen for */
115 extern enum processor_type mips_tune; /* which cpu to schedule for */
116 extern int mips_isa; /* architectural level */
117 extern int mips_abi; /* which ABI to use */
118 extern int mips16_hard_float; /* mips16 without -msoft-float */
119 extern int mips_entry; /* generate entry/exit for mips16 */
120 extern const char *mips_arch_string; /* for -march=<xxx> */
121 extern const char *mips_tune_string; /* for -mtune=<xxx> */
122 extern const char *mips_isa_string; /* for -mips{1,2,3,4} */
123 extern const char *mips_abi_string; /* for -mabi={32,n32,64} */
124 extern const char *mips_cache_flush_func;/* for -mflush-func= and -mno-flush-func */
125 extern int mips_string_length; /* length of strings for mips16 */
126 extern const struct mips_cpu_info mips_cpu_info_table[];
127 extern const struct mips_cpu_info *mips_arch_info;
128 extern const struct mips_cpu_info *mips_tune_info;
130 /* Macros to silence warnings about numbers being signed in traditional
131 C and unsigned in ISO C when compiled on 32-bit hosts. */
133 #define BITMASK_HIGH (((unsigned long)1) << 31) /* 0x80000000 */
134 #define BITMASK_UPPER16 ((unsigned long)0xffff << 16) /* 0xffff0000 */
135 #define BITMASK_LOWER16 ((unsigned long)0xffff) /* 0x0000ffff */
138 /* Run-time compilation parameters selecting different hardware subsets. */
140 /* Macros used in the machine description to test the flags. */
142 /* Bits for real switches */
143 #define MASK_INT64 0x00000001 /* ints are 64 bits */
144 #define MASK_LONG64 0x00000002 /* longs are 64 bits */
145 #define MASK_SPLIT_ADDR 0x00000004 /* Address splitting is enabled. */
146 #define MASK_NO_FUSED_MADD 0x00000008 /* Don't generate floating point
147 multiply-add operations. */
148 #define MASK_GAS 0x00000010 /* Gas used instead of MIPS as */
149 #define MASK_NAME_REGS 0x00000020 /* Use MIPS s/w reg name convention */
150 #define MASK_EXPLICIT_RELOCS 0x00000040 /* Use relocation operators. */
151 #define MASK_MEMCPY 0x00000080 /* call memcpy instead of inline code*/
152 #define MASK_SOFT_FLOAT 0x00000100 /* software floating point */
153 #define MASK_FLOAT64 0x00000200 /* fp registers are 64 bits */
154 #define MASK_ABICALLS 0x00000400 /* emit .abicalls/.cprestore/.cpload */
155 #define MASK_XGOT 0x00000800 /* emit big-got PIC */
156 #define MASK_LONG_CALLS 0x00001000 /* Always call through a register */
157 #define MASK_64BIT 0x00002000 /* Use 64 bit GP registers and insns */
158 #define MASK_EMBEDDED_PIC 0x00004000 /* Generate embedded PIC code */
159 #define MASK_EMBEDDED_DATA 0x00008000 /* Reduce RAM usage, not fast code */
160 #define MASK_BIG_ENDIAN 0x00010000 /* Generate big endian code */
161 #define MASK_SINGLE_FLOAT 0x00020000 /* Only single precision FPU. */
162 #define MASK_MAD 0x00040000 /* Generate mad/madu as on 4650. */
163 #define MASK_4300_MUL_FIX 0x00080000 /* Work-around early Vr4300 CPU bug */
164 #define MASK_MIPS16 0x00100000 /* Generate mips16 code */
165 #define MASK_NO_CHECK_ZERO_DIV \
166 0x00200000 /* divide by zero checking */
167 #define MASK_BRANCHLIKELY 0x00400000 /* Generate Branch Likely
169 #define MASK_UNINIT_CONST_IN_RODATA \
170 0x00800000 /* Store uninitialized
172 #define MASK_FIX_SB1 0x01000000 /* Work around SB-1 errata. */
174 /* Debug switches, not documented */
175 #define MASK_DEBUG 0 /* unused */
176 #define MASK_DEBUG_A 0 /* don't allow <label>($reg) addrs */
177 #define MASK_DEBUG_B 0 /* GO_IF_LEGITIMATE_ADDRESS debug */
178 #define MASK_DEBUG_C 0 /* don't expand seq, etc. */
179 #define MASK_DEBUG_D 0 /* don't do define_split's */
180 #define MASK_DEBUG_E 0 /* function_arg debug */
181 #define MASK_DEBUG_F 0 /* ??? */
182 #define MASK_DEBUG_G 0 /* don't support 64 bit arithmetic */
183 #define MASK_DEBUG_I 0 /* unused */
185 /* Dummy switches used only in specs */
186 #define MASK_MIPS_TFILE 0 /* flag for mips-tfile usage */
188 /* r4000 64 bit sizes */
189 #define TARGET_INT64 (target_flags & MASK_INT64)
190 #define TARGET_LONG64 (target_flags & MASK_LONG64)
191 #define TARGET_FLOAT64 (target_flags & MASK_FLOAT64)
192 #define TARGET_64BIT (target_flags & MASK_64BIT)
194 /* Mips vs. GNU linker */
195 #define TARGET_SPLIT_ADDRESSES (target_flags & MASK_SPLIT_ADDR)
197 /* Mips vs. GNU assembler */
198 #define TARGET_GAS (target_flags & MASK_GAS)
199 #define TARGET_MIPS_AS (!TARGET_GAS)
202 #define TARGET_DEBUG_MODE (target_flags & MASK_DEBUG)
203 #define TARGET_DEBUG_A_MODE (target_flags & MASK_DEBUG_A)
204 #define TARGET_DEBUG_B_MODE (target_flags & MASK_DEBUG_B)
205 #define TARGET_DEBUG_C_MODE (target_flags & MASK_DEBUG_C)
206 #define TARGET_DEBUG_D_MODE (target_flags & MASK_DEBUG_D)
207 #define TARGET_DEBUG_E_MODE (target_flags & MASK_DEBUG_E)
208 #define TARGET_DEBUG_F_MODE (target_flags & MASK_DEBUG_F)
209 #define TARGET_DEBUG_G_MODE (target_flags & MASK_DEBUG_G)
210 #define TARGET_DEBUG_I_MODE (target_flags & MASK_DEBUG_I)
212 /* Reg. Naming in .s ($21 vs. $a0) */
213 #define TARGET_NAME_REGS (target_flags & MASK_NAME_REGS)
215 /* call memcpy instead of inline code */
216 #define TARGET_MEMCPY (target_flags & MASK_MEMCPY)
218 /* .abicalls, etc from Pyramid V.4 */
219 #define TARGET_ABICALLS (target_flags & MASK_ABICALLS)
220 #define TARGET_XGOT (target_flags & MASK_XGOT)
222 /* software floating point */
223 #define TARGET_SOFT_FLOAT (target_flags & MASK_SOFT_FLOAT)
224 #define TARGET_HARD_FLOAT (! TARGET_SOFT_FLOAT)
226 /* always call through a register */
227 #define TARGET_LONG_CALLS (target_flags & MASK_LONG_CALLS)
229 /* generate embedded PIC code;
231 #define TARGET_EMBEDDED_PIC (target_flags & MASK_EMBEDDED_PIC)
233 /* for embedded systems, optimize for
234 reduced RAM space instead of for
236 #define TARGET_EMBEDDED_DATA (target_flags & MASK_EMBEDDED_DATA)
238 /* always store uninitialized const
239 variables in rodata, requires
240 TARGET_EMBEDDED_DATA. */
241 #define TARGET_UNINIT_CONST_IN_RODATA (target_flags & MASK_UNINIT_CONST_IN_RODATA)
243 /* generate big endian code. */
244 #define TARGET_BIG_ENDIAN (target_flags & MASK_BIG_ENDIAN)
246 #define TARGET_SINGLE_FLOAT (target_flags & MASK_SINGLE_FLOAT)
247 #define TARGET_DOUBLE_FLOAT (! TARGET_SINGLE_FLOAT)
249 #define TARGET_MAD (target_flags & MASK_MAD)
251 #define TARGET_FUSED_MADD (! (target_flags & MASK_NO_FUSED_MADD))
253 #define TARGET_4300_MUL_FIX (target_flags & MASK_4300_MUL_FIX)
255 #define TARGET_CHECK_ZERO_DIV (!(target_flags & MASK_NO_CHECK_ZERO_DIV))
257 #define TARGET_BRANCHLIKELY (target_flags & MASK_BRANCHLIKELY)
259 #define TARGET_FIX_SB1 (target_flags & MASK_FIX_SB1)
261 /* True if we should use NewABI-style relocation operators for
262 symbolic addresses. This is never true for mips16 code,
263 which has its own conventions. */
265 #define TARGET_EXPLICIT_RELOCS (target_flags & MASK_EXPLICIT_RELOCS)
268 /* True if the call patterns should be split into a jalr followed by
269 an instruction to restore $gp. This is only ever true for SVR4 PIC,
270 in which $gp is call-clobbered. It is only safe to split the load
271 from the call when every use of $gp is explicit. */
273 #define TARGET_SPLIT_CALLS \
274 (TARGET_EXPLICIT_RELOCS && TARGET_ABICALLS && !TARGET_NEWABI)
276 /* True if we can optimize sibling calls. For simplicity, we only
277 handle cases in which call_insn_operand will reject invalid
278 sibcall addresses. There are two cases in which this isn't true:
280 - TARGET_MIPS16. call_insn_operand accepts constant addresses
281 but there is no direct jump instruction. It isn't worth
282 using sibling calls in this case anyway; they would usually
283 be longer than normal calls.
285 - TARGET_ABICALLS && !TARGET_EXPLICIT_RELOCS. call_insn_operand
286 accepts global constants, but "jr $25" is the only allowed
289 #define TARGET_SIBCALLS \
290 (!TARGET_MIPS16 && (!TARGET_ABICALLS || TARGET_EXPLICIT_RELOCS))
292 /* True if .gpword or .gpdword should be used for switch tables.
293 Not all SGI assemblers support this. */
295 #define TARGET_GPWORD (TARGET_ABICALLS && (!TARGET_NEWABI || TARGET_GAS))
297 /* Generate mips16 code */
298 #define TARGET_MIPS16 (target_flags & MASK_MIPS16)
300 /* Generic ISA defines. */
301 #define ISA_MIPS1 (mips_isa == 1)
302 #define ISA_MIPS2 (mips_isa == 2)
303 #define ISA_MIPS3 (mips_isa == 3)
304 #define ISA_MIPS4 (mips_isa == 4)
305 #define ISA_MIPS32 (mips_isa == 32)
306 #define ISA_MIPS32R2 (mips_isa == 33)
307 #define ISA_MIPS64 (mips_isa == 64)
309 /* Architecture target defines. */
310 #define TARGET_MIPS3900 (mips_arch == PROCESSOR_R3900)
311 #define TARGET_MIPS4000 (mips_arch == PROCESSOR_R4000)
312 #define TARGET_MIPS4100 (mips_arch == PROCESSOR_R4100)
313 #define TARGET_MIPS4120 (mips_arch == PROCESSOR_R4120)
314 #define TARGET_MIPS4300 (mips_arch == PROCESSOR_R4300)
315 #define TARGET_MIPS4KC (mips_arch == PROCESSOR_4KC)
316 #define TARGET_MIPS5KC (mips_arch == PROCESSOR_5KC)
317 #define TARGET_MIPS5400 (mips_arch == PROCESSOR_R5400)
318 #define TARGET_MIPS5500 (mips_arch == PROCESSOR_R5500)
319 #define TARGET_MIPS7000 (mips_arch == PROCESSOR_R7000)
320 #define TARGET_MIPS9000 (mips_arch == PROCESSOR_R9000)
321 #define TARGET_SB1 (mips_arch == PROCESSOR_SB1)
322 #define TARGET_SR71K (mips_arch == PROCESSOR_SR71000)
324 /* Scheduling target defines. */
325 #define TUNE_MIPS3000 (mips_tune == PROCESSOR_R3000)
326 #define TUNE_MIPS3900 (mips_tune == PROCESSOR_R3900)
327 #define TUNE_MIPS4000 (mips_tune == PROCESSOR_R4000)
328 #define TUNE_MIPS5000 (mips_tune == PROCESSOR_R5000)
329 #define TUNE_MIPS5400 (mips_tune == PROCESSOR_R5400)
330 #define TUNE_MIPS5500 (mips_tune == PROCESSOR_R5500)
331 #define TUNE_MIPS6000 (mips_tune == PROCESSOR_R6000)
332 #define TUNE_MIPS7000 (mips_tune == PROCESSOR_R7000)
333 #define TUNE_MIPS9000 (mips_tune == PROCESSOR_R9000)
334 #define TUNE_SB1 (mips_tune == PROCESSOR_SB1)
335 #define TUNE_SR71K (mips_tune == PROCESSOR_SR71000)
337 #define TARGET_NEWABI (mips_abi == ABI_N32 || mips_abi == ABI_64)
339 /* Define preprocessor macros for the -march and -mtune options.
340 PREFIX is either _MIPS_ARCH or _MIPS_TUNE, INFO is the selected
341 processor. If INFO's canonical name is "foo", define PREFIX to
342 be "foo", and define an additional macro PREFIX_FOO. */
343 #define MIPS_CPP_SET_PROCESSOR(PREFIX, INFO) \
348 macro = concat ((PREFIX), "_", (INFO)->name, NULL); \
349 for (p = macro; *p != 0; p++) \
352 builtin_define (macro); \
353 builtin_define_with_value ((PREFIX), (INFO)->name, 1); \
358 /* Target CPU builtins. */
359 #define TARGET_CPU_CPP_BUILTINS() \
362 builtin_assert ("cpu=mips"); \
363 builtin_define ("__mips__"); \
364 builtin_define ("_mips"); \
366 /* We do this here because __mips is defined below \
367 and so we can't use builtin_define_std. */ \
369 builtin_define ("mips"); \
371 /* Treat _R3000 and _R4000 like register-size defines, \
372 which is how they've historically been used. */ \
375 builtin_define ("__mips64"); \
376 builtin_define_std ("R4000"); \
377 builtin_define ("_R4000"); \
381 builtin_define_std ("R3000"); \
382 builtin_define ("_R3000"); \
384 if (TARGET_FLOAT64) \
385 builtin_define ("__mips_fpr=64"); \
387 builtin_define ("__mips_fpr=32"); \
390 builtin_define ("__mips16"); \
392 MIPS_CPP_SET_PROCESSOR ("_MIPS_ARCH", mips_arch_info); \
393 MIPS_CPP_SET_PROCESSOR ("_MIPS_TUNE", mips_tune_info); \
397 builtin_define ("__mips=1"); \
398 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS1"); \
400 else if (ISA_MIPS2) \
402 builtin_define ("__mips=2"); \
403 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS2"); \
405 else if (ISA_MIPS3) \
407 builtin_define ("__mips=3"); \
408 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS3"); \
410 else if (ISA_MIPS4) \
412 builtin_define ("__mips=4"); \
413 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS4"); \
415 else if (ISA_MIPS32) \
417 builtin_define ("__mips=32"); \
418 builtin_define ("__mips_isa_rev=1"); \
419 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
421 else if (ISA_MIPS32R2) \
423 builtin_define ("__mips=32"); \
424 builtin_define ("__mips_isa_rev=2"); \
425 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
427 else if (ISA_MIPS64) \
429 builtin_define ("__mips=64"); \
430 builtin_define ("__mips_isa_rev=1"); \
431 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
434 if (TARGET_HARD_FLOAT) \
435 builtin_define ("__mips_hard_float"); \
436 else if (TARGET_SOFT_FLOAT) \
437 builtin_define ("__mips_soft_float"); \
439 if (TARGET_SINGLE_FLOAT) \
440 builtin_define ("__mips_single_float"); \
442 if (TARGET_BIG_ENDIAN) \
444 builtin_define_std ("MIPSEB"); \
445 builtin_define ("_MIPSEB"); \
449 builtin_define_std ("MIPSEL"); \
450 builtin_define ("_MIPSEL"); \
453 /* Macros dependent on the C dialect. */ \
454 if (preprocessing_asm_p ()) \
456 builtin_define_std ("LANGUAGE_ASSEMBLY"); \
457 builtin_define ("_LANGUAGE_ASSEMBLY"); \
459 else if (c_dialect_cxx ()) \
461 builtin_define ("_LANGUAGE_C_PLUS_PLUS"); \
462 builtin_define ("__LANGUAGE_C_PLUS_PLUS"); \
463 builtin_define ("__LANGUAGE_C_PLUS_PLUS__"); \
467 builtin_define_std ("LANGUAGE_C"); \
468 builtin_define ("_LANGUAGE_C"); \
470 if (c_dialect_objc ()) \
472 builtin_define ("_LANGUAGE_OBJECTIVE_C"); \
473 builtin_define ("__LANGUAGE_OBJECTIVE_C"); \
474 /* Bizzare, but needed at least for Irix. */ \
475 builtin_define_std ("LANGUAGE_C"); \
476 builtin_define ("_LANGUAGE_C"); \
479 if (mips_abi == ABI_EABI) \
480 builtin_define ("__mips_eabi"); \
486 /* Macro to define tables used to set the flags.
487 This is a list in braces of pairs in braces,
488 each pair being { "NAME", VALUE }
489 where VALUE is the bits to set or minus the bits to clear.
490 An empty string NAME is used to identify the default VALUE. */
492 #define TARGET_SWITCHES \
494 SUBTARGET_TARGET_SWITCHES \
495 {"int64", MASK_INT64 | MASK_LONG64, \
496 N_("Use 64-bit int type")}, \
497 {"long64", MASK_LONG64, \
498 N_("Use 64-bit long type")}, \
499 {"long32", -(MASK_LONG64 | MASK_INT64), \
500 N_("Use 32-bit long type")}, \
501 {"split-addresses", MASK_SPLIT_ADDR, \
502 N_("Optimize lui/addiu address loads")}, \
503 {"no-split-addresses", -MASK_SPLIT_ADDR, \
504 N_("Don't optimize lui/addiu address loads")}, \
505 {"mips-as", -MASK_GAS, \
506 N_("Use MIPS as")}, \
509 {"rnames", MASK_NAME_REGS, \
510 N_("Use symbolic register names")}, \
511 {"no-rnames", -MASK_NAME_REGS, \
512 N_("Don't use symbolic register names")}, \
514 N_("Use GP relative sdata/sbss sections (now ignored)")}, \
516 N_("Use GP relative sdata/sbss sections (now ignored)")}, \
518 N_("Don't use GP relative sdata/sbss sections (now ignored)")}, \
520 N_("Don't use GP relative sdata/sbss sections (now ignored)")}, \
522 N_("Output compiler statistics (now ignored)")}, \
524 N_("Don't output compiler statistics")}, \
525 {"memcpy", MASK_MEMCPY, \
526 N_("Don't optimize block moves")}, \
527 {"no-memcpy", -MASK_MEMCPY, \
528 N_("Optimize block moves")}, \
529 {"mips-tfile", MASK_MIPS_TFILE, \
530 N_("Use mips-tfile asm postpass")}, \
531 {"no-mips-tfile", -MASK_MIPS_TFILE, \
532 N_("Don't use mips-tfile asm postpass")}, \
533 {"soft-float", MASK_SOFT_FLOAT, \
534 N_("Use software floating point")}, \
535 {"hard-float", -MASK_SOFT_FLOAT, \
536 N_("Use hardware floating point")}, \
537 {"fp64", MASK_FLOAT64, \
538 N_("Use 64-bit FP registers")}, \
539 {"fp32", -MASK_FLOAT64, \
540 N_("Use 32-bit FP registers")}, \
541 {"gp64", MASK_64BIT, \
542 N_("Use 64-bit general registers")}, \
543 {"gp32", -MASK_64BIT, \
544 N_("Use 32-bit general registers")}, \
545 {"abicalls", MASK_ABICALLS, \
546 N_("Use Irix PIC")}, \
547 {"no-abicalls", -MASK_ABICALLS, \
548 N_("Don't use Irix PIC")}, \
549 {"long-calls", MASK_LONG_CALLS, \
550 N_("Use indirect calls")}, \
551 {"no-long-calls", -MASK_LONG_CALLS, \
552 N_("Don't use indirect calls")}, \
553 {"embedded-pic", MASK_EMBEDDED_PIC, \
554 N_("Use embedded PIC")}, \
555 {"no-embedded-pic", -MASK_EMBEDDED_PIC, \
556 N_("Don't use embedded PIC")}, \
557 {"embedded-data", MASK_EMBEDDED_DATA, \
558 N_("Use ROM instead of RAM")}, \
559 {"no-embedded-data", -MASK_EMBEDDED_DATA, \
560 N_("Don't use ROM instead of RAM")}, \
561 {"uninit-const-in-rodata", MASK_UNINIT_CONST_IN_RODATA, \
562 N_("Put uninitialized constants in ROM (needs -membedded-data)")}, \
563 {"no-uninit-const-in-rodata", -MASK_UNINIT_CONST_IN_RODATA, \
564 N_("Don't put uninitialized constants in ROM")}, \
565 {"eb", MASK_BIG_ENDIAN, \
566 N_("Use big-endian byte order")}, \
567 {"el", -MASK_BIG_ENDIAN, \
568 N_("Use little-endian byte order")}, \
569 {"single-float", MASK_SINGLE_FLOAT, \
570 N_("Use single (32-bit) FP only")}, \
571 {"double-float", -MASK_SINGLE_FLOAT, \
572 N_("Don't use single (32-bit) FP only")}, \
574 N_("Use multiply accumulate")}, \
575 {"no-mad", -MASK_MAD, \
576 N_("Don't use multiply accumulate")}, \
577 {"no-fused-madd", MASK_NO_FUSED_MADD, \
578 N_("Don't generate fused multiply/add instructions")}, \
579 {"fused-madd", -MASK_NO_FUSED_MADD, \
580 N_("Generate fused multiply/add instructions")}, \
581 {"fix4300", MASK_4300_MUL_FIX, \
582 N_("Work around early 4300 hardware bug")}, \
583 {"no-fix4300", -MASK_4300_MUL_FIX, \
584 N_("Don't work around early 4300 hardware bug")}, \
585 {"fix-sb1", MASK_FIX_SB1, \
586 N_("Work around errata for early SB-1 revision 2 cores")}, \
587 {"no-fix-sb1", -MASK_FIX_SB1, \
588 N_("Don't work around errata for early SB-1 revision 2 cores")}, \
589 {"check-zero-division",-MASK_NO_CHECK_ZERO_DIV, \
590 N_("Trap on integer divide by zero")}, \
591 {"no-check-zero-division", MASK_NO_CHECK_ZERO_DIV, \
592 N_("Don't trap on integer divide by zero")}, \
593 { "branch-likely", MASK_BRANCHLIKELY, \
594 N_("Use Branch Likely instructions, overriding default for arch")}, \
595 { "no-branch-likely", -MASK_BRANCHLIKELY, \
596 N_("Don't use Branch Likely instructions, overriding default for arch")}, \
597 {"explicit-relocs", MASK_EXPLICIT_RELOCS, \
598 N_("Use NewABI-style %reloc() assembly operators")}, \
599 {"no-explicit-relocs", -MASK_EXPLICIT_RELOCS, \
600 N_("Use assembler macros instead of relocation operators")}, \
601 {"ips16", MASK_MIPS16, \
602 N_("Generate mips16 code") }, \
603 {"no-mips16", -MASK_MIPS16, \
604 N_("Generate normal-mode code") }, \
605 {"xgot", MASK_XGOT, \
606 N_("Lift restrictions on GOT size") }, \
607 {"no-xgot", -MASK_XGOT, \
608 N_("Do not lift restrictions on GOT size") }, \
609 {"debug", MASK_DEBUG, \
611 {"debuga", MASK_DEBUG_A, \
613 {"debugb", MASK_DEBUG_B, \
615 {"debugc", MASK_DEBUG_C, \
617 {"debugd", MASK_DEBUG_D, \
619 {"debuge", MASK_DEBUG_E, \
621 {"debugf", MASK_DEBUG_F, \
623 {"debugg", MASK_DEBUG_G, \
625 {"debugi", MASK_DEBUG_I, \
627 {"", (TARGET_DEFAULT \
628 | TARGET_CPU_DEFAULT \
629 | TARGET_ENDIAN_DEFAULT), \
633 /* Default target_flags if no switches are specified */
635 #ifndef TARGET_DEFAULT
636 #define TARGET_DEFAULT 0
639 #ifndef TARGET_CPU_DEFAULT
640 #define TARGET_CPU_DEFAULT 0
643 #ifndef TARGET_ENDIAN_DEFAULT
644 #define TARGET_ENDIAN_DEFAULT MASK_BIG_ENDIAN
647 /* 'from-abi' makes a good default: you get whatever the ABI requires. */
648 #ifndef MIPS_ISA_DEFAULT
649 #ifndef MIPS_CPU_STRING_DEFAULT
650 #define MIPS_CPU_STRING_DEFAULT "from-abi"
656 /* Make this compile time constant for libgcc2 */
658 #define TARGET_64BIT 1
660 #define TARGET_64BIT 0
662 #endif /* IN_LIBGCC2 */
664 #ifndef MULTILIB_ENDIAN_DEFAULT
665 #if TARGET_ENDIAN_DEFAULT == 0
666 #define MULTILIB_ENDIAN_DEFAULT "EL"
668 #define MULTILIB_ENDIAN_DEFAULT "EB"
672 #ifndef MULTILIB_ISA_DEFAULT
673 # if MIPS_ISA_DEFAULT == 1
674 # define MULTILIB_ISA_DEFAULT "mips1"
676 # if MIPS_ISA_DEFAULT == 2
677 # define MULTILIB_ISA_DEFAULT "mips2"
679 # if MIPS_ISA_DEFAULT == 3
680 # define MULTILIB_ISA_DEFAULT "mips3"
682 # if MIPS_ISA_DEFAULT == 4
683 # define MULTILIB_ISA_DEFAULT "mips4"
685 # if MIPS_ISA_DEFAULT == 32
686 # define MULTILIB_ISA_DEFAULT "mips32"
688 # if MIPS_ISA_DEFAULT == 33
689 # define MULTILIB_ISA_DEFAULT "mips32r2"
691 # if MIPS_ISA_DEFAULT == 64
692 # define MULTILIB_ISA_DEFAULT "mips64"
694 # define MULTILIB_ISA_DEFAULT "mips1"
704 #ifndef MULTILIB_DEFAULTS
705 #define MULTILIB_DEFAULTS \
706 { MULTILIB_ENDIAN_DEFAULT, MULTILIB_ISA_DEFAULT, MULTILIB_ABI_DEFAULT }
709 /* We must pass -EL to the linker by default for little endian embedded
710 targets using linker scripts with a OUTPUT_FORMAT line. Otherwise, the
711 linker will default to using big-endian output files. The OUTPUT_FORMAT
712 line must be in the linker script, otherwise -EB/-EL will not work. */
715 #if TARGET_ENDIAN_DEFAULT == 0
716 #define ENDIAN_SPEC "%{!EB:%{!meb:-EL}} %{EB|meb:-EB}"
718 #define ENDIAN_SPEC "%{!EL:%{!mel:-EB}} %{EL|mel:-EL}"
722 #define TARGET_OPTIONS \
724 SUBTARGET_TARGET_OPTIONS \
725 { "tune=", &mips_tune_string, \
726 N_("Specify CPU for scheduling purposes"), 0}, \
727 { "arch=", &mips_arch_string, \
728 N_("Specify CPU for code generation purposes"), 0}, \
729 { "abi=", &mips_abi_string, \
730 N_("Specify an ABI"), 0}, \
731 { "ips", &mips_isa_string, \
732 N_("Specify a Standard MIPS ISA"), 0}, \
733 { "no-flush-func", &mips_cache_flush_func, \
734 N_("Don't call any cache flush functions"), 0}, \
735 { "flush-func=", &mips_cache_flush_func, \
736 N_("Specify cache flush function"), 0}, \
739 /* This is meant to be redefined in the host dependent files. */
740 #define SUBTARGET_TARGET_OPTIONS
742 /* Support for a compile-time default CPU, et cetera. The rules are:
743 --with-arch is ignored if -march is specified or a -mips is specified
744 (other than -mips16).
745 --with-tune is ignored if -mtune is specified.
746 --with-abi is ignored if -mabi is specified.
747 --with-float is ignored if -mhard-float or -msoft-float are
749 #define OPTION_DEFAULT_SPECS \
750 {"arch", "%{!march=*:%{mips16:-march=%(VALUE)}%{!mips*:-march=%(VALUE)}}" }, \
751 {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \
752 {"abi", "%{!mabi=*:-mabi=%(VALUE)}" }, \
753 {"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }
756 #define GENERATE_BRANCHLIKELY (TARGET_BRANCHLIKELY \
760 /* Generate three-operand multiply instructions for SImode. */
761 #define GENERATE_MULT3_SI ((TARGET_MIPS3900 \
771 /* Generate three-operand multiply instructions for DImode. */
772 #define GENERATE_MULT3_DI ((TARGET_MIPS3900) \
775 /* Macros to decide whether certain features are available or not,
776 depending on the instruction set architecture level. */
778 #define HAVE_SQRT_P() (!ISA_MIPS1)
780 /* True if the ABI can only work with 64-bit integer registers. We
781 generally allow ad-hoc variations for TARGET_SINGLE_FLOAT, but
782 otherwise floating-point registers must also be 64-bit. */
783 #define ABI_NEEDS_64BIT_REGS (mips_abi == ABI_64 \
784 || mips_abi == ABI_O64 \
785 || mips_abi == ABI_N32)
787 /* Likewise for 32-bit regs. */
788 #define ABI_NEEDS_32BIT_REGS (mips_abi == ABI_32)
790 /* True if symbols are 64 bits wide. At present, n64 is the only
791 ABI for which this is true. */
792 #define ABI_HAS_64BIT_SYMBOLS (mips_abi == ABI_64)
794 /* ISA has instructions for managing 64 bit fp and gp regs (eg. mips3). */
795 #define ISA_HAS_64BIT_REGS (ISA_MIPS3 \
799 /* ISA has branch likely instructions (eg. mips2). */
800 /* Disable branchlikely for tx39 until compare rewrite. They haven't
801 been generated up to this point. */
802 #define ISA_HAS_BRANCHLIKELY (!ISA_MIPS1 \
805 /* ISA has the conditional move instructions introduced in mips4. */
806 #define ISA_HAS_CONDMOVE ((ISA_MIPS4 \
810 && !TARGET_MIPS5500 \
813 /* ISA has just the integer condition move instructions (movn,movz) */
814 #define ISA_HAS_INT_CONDMOVE 0
816 /* ISA has the mips4 FP condition code instructions: FP-compare to CC,
817 branch on CC, and move (both FP and non-FP) on CC. */
818 #define ISA_HAS_8CC (ISA_MIPS4 \
823 /* This is a catch all for other mips4 instructions: indexed load, the
824 FP madd and msub instructions, and the FP recip and recip sqrt
826 #define ISA_HAS_FP4 ((ISA_MIPS4 \
830 /* ISA has conditional trap instructions. */
831 #define ISA_HAS_COND_TRAP (!ISA_MIPS1 \
834 /* ISA has integer multiply-accumulate instructions, madd and msub. */
835 #define ISA_HAS_MADD_MSUB ((ISA_MIPS32 \
840 /* ISA has floating-point nmadd and nmsub instructions. */
841 #define ISA_HAS_NMADD_NMSUB ((ISA_MIPS4 \
843 && (!TARGET_MIPS5400 || TARGET_MAD) \
846 /* ISA has count leading zeroes/ones instruction (not implemented). */
847 #define ISA_HAS_CLZ_CLO ((ISA_MIPS32 \
852 /* ISA has double-word count leading zeroes/ones instruction (not
854 #define ISA_HAS_DCLZ_DCLO (ISA_MIPS64 \
857 /* ISA has three operand multiply instructions that put
858 the high part in an accumulator: mulhi or mulhiu. */
859 #define ISA_HAS_MULHI (TARGET_MIPS5400 \
864 /* ISA has three operand multiply instructions that
865 negates the result and puts the result in an accumulator. */
866 #define ISA_HAS_MULS (TARGET_MIPS5400 \
871 /* ISA has three operand multiply instructions that subtracts the
872 result from a 4th operand and puts the result in an accumulator. */
873 #define ISA_HAS_MSAC (TARGET_MIPS5400 \
877 /* ISA has three operand multiply instructions that the result
878 from a 4th operand and puts the result in an accumulator. */
879 #define ISA_HAS_MACC ((TARGET_MIPS4120 && !TARGET_MIPS16) \
885 /* ISA has 32-bit rotate right instruction. */
886 #define ISA_HAS_ROTR_SI (!TARGET_MIPS16 \
893 /* ISA has 64-bit rotate right instruction. */
894 #define ISA_HAS_ROTR_DI (TARGET_64BIT \
896 && (TARGET_MIPS5400 \
901 /* ISA has data prefetch instructions. This controls use of 'pref'. */
902 #define ISA_HAS_PREFETCH ((ISA_MIPS4 \
908 /* ISA has data indexed prefetch instructions. This controls use of
909 'prefx', along with TARGET_HARD_FLOAT and TARGET_DOUBLE_FLOAT.
910 (prefx is a cop1x instruction, so can only be used if FP is
912 #define ISA_HAS_PREFETCHX ((ISA_MIPS4 \
916 /* True if trunc.w.s and trunc.w.d are real (not synthetic)
917 instructions. Both require TARGET_HARD_FLOAT, and trunc.w.d
918 also requires TARGET_DOUBLE_FLOAT. */
919 #define ISA_HAS_TRUNC_W (!ISA_MIPS1)
921 /* ISA includes the MIPS32r2 seb and seh instructions. */
922 #define ISA_HAS_SEB_SEH (!TARGET_MIPS16 \
926 /* True if the result of a load is not available to the next instruction.
927 A nop will then be needed between instructions like "lw $4,..."
928 and "addiu $4,$4,1". */
929 #define ISA_HAS_LOAD_DELAY (mips_isa == 1 \
930 && !TARGET_MIPS3900 \
933 /* Likewise mtc1 and mfc1. */
934 #define ISA_HAS_XFER_DELAY (mips_isa <= 3)
936 /* Likewise floating-point comparisons. */
937 #define ISA_HAS_FCMP_DELAY (mips_isa <= 3)
939 /* True if mflo and mfhi can be immediately followed by instructions
940 which write to the HI and LO registers. Most targets require a
941 two-instruction gap. */
942 #define ISA_HAS_HILO_INTERLOCKS (TARGET_MIPS5500 || TARGET_SB1)
944 /* Add -G xx support. */
946 #undef SWITCH_TAKES_ARG
947 #define SWITCH_TAKES_ARG(CHAR) \
948 (DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G')
950 #define OVERRIDE_OPTIONS override_options ()
952 #define CONDITIONAL_REGISTER_USAGE mips_conditional_register_usage ()
954 /* Show we can debug even without a frame pointer. */
955 #define CAN_DEBUG_WITHOUT_FP
957 /* Tell collect what flags to pass to nm. */
959 #define NM_FLAGS "-Bn"
963 /* Assembler specs. */
965 /* MIPS_AS_ASM_SPEC is passed when using the MIPS assembler rather
968 #define MIPS_AS_ASM_SPEC "\
969 %{!.s:-nocpp} %{.s: %{cpp} %{nocpp}} \
970 %{pipe: %e-pipe is not supported} \
971 %{K} %(subtarget_mips_as_asm_spec)"
973 /* SUBTARGET_MIPS_AS_ASM_SPEC is passed when using the MIPS assembler
974 rather than gas. It may be overridden by subtargets. */
976 #ifndef SUBTARGET_MIPS_AS_ASM_SPEC
977 #define SUBTARGET_MIPS_AS_ASM_SPEC "%{v}"
980 /* GAS_ASM_SPEC is passed when using gas, rather than the MIPS
983 #define GAS_ASM_SPEC "%{mtune=*} %{v}"
985 #define SUBTARGET_TARGET_SWITCHES
987 #ifndef MIPS_ABI_DEFAULT
988 #define MIPS_ABI_DEFAULT ABI_32
991 /* Use the most portable ABI flag for the ASM specs. */
993 #if MIPS_ABI_DEFAULT == ABI_32
994 #define MULTILIB_ABI_DEFAULT "mabi=32"
995 #define ASM_ABI_DEFAULT_SPEC "-32"
998 #if MIPS_ABI_DEFAULT == ABI_O64
999 #define MULTILIB_ABI_DEFAULT "mabi=o64"
1000 #define ASM_ABI_DEFAULT_SPEC "-mabi=o64"
1003 #if MIPS_ABI_DEFAULT == ABI_N32
1004 #define MULTILIB_ABI_DEFAULT "mabi=n32"
1005 #define ASM_ABI_DEFAULT_SPEC "-n32"
1008 #if MIPS_ABI_DEFAULT == ABI_64
1009 #define MULTILIB_ABI_DEFAULT "mabi=64"
1010 #define ASM_ABI_DEFAULT_SPEC "-64"
1013 #if MIPS_ABI_DEFAULT == ABI_EABI
1014 #define MULTILIB_ABI_DEFAULT "mabi=eabi"
1015 #define ASM_ABI_DEFAULT_SPEC "-mabi=eabi"
1018 /* Only ELF targets can switch the ABI. */
1019 #ifndef OBJECT_FORMAT_ELF
1020 #undef ASM_ABI_DEFAULT_SPEC
1021 #define ASM_ABI_DEFAULT_SPEC ""
1024 /* TARGET_ASM_SPEC is used to select either MIPS_AS_ASM_SPEC or
1025 GAS_ASM_SPEC as the default, depending upon the value of
1028 #if ((TARGET_CPU_DEFAULT | TARGET_DEFAULT) & MASK_GAS) != 0
1031 #define TARGET_ASM_SPEC "\
1032 %{mmips-as: %(mips_as_asm_spec)} \
1033 %{!mmips-as: %(gas_asm_spec)}"
1037 #define TARGET_ASM_SPEC "\
1038 %{!mgas: %(mips_as_asm_spec)} \
1039 %{mgas: %(gas_asm_spec)}"
1041 #endif /* not GAS */
1043 /* SUBTARGET_ASM_OPTIMIZING_SPEC handles passing optimization options
1044 to the assembler. It may be overridden by subtargets. */
1045 #ifndef SUBTARGET_ASM_OPTIMIZING_SPEC
1046 #define SUBTARGET_ASM_OPTIMIZING_SPEC "\
1048 %{!noasmopt:%{O:-O2} %{O1:-O2} %{O2:-O2} %{O3:-O3}}"
1051 /* SUBTARGET_ASM_DEBUGGING_SPEC handles passing debugging options to
1052 the assembler. It may be overridden by subtargets. */
1053 #ifndef SUBTARGET_ASM_DEBUGGING_SPEC
1054 #define SUBTARGET_ASM_DEBUGGING_SPEC "\
1055 %{g} %{g0} %{g1} %{g2} %{g3} \
1056 %{ggdb:-g} %{ggdb0:-g0} %{ggdb1:-g1} %{ggdb2:-g2} %{ggdb3:-g3} \
1057 %{gstabs:-g} %{gstabs0:-g0} %{gstabs1:-g1} %{gstabs2:-g2} %{gstabs3:-g3} \
1058 %{gstabs+:-g} %{gstabs+0:-g0} %{gstabs+1:-g1} %{gstabs+2:-g2} %{gstabs+3:-g3} \
1059 %{gcoff:-g} %{gcoff0:-g0} %{gcoff1:-g1} %{gcoff2:-g2} %{gcoff3:-g3} \
1063 /* Beginning with gas 2.13, -mdebug must be passed to correctly handle COFF
1064 and stabs debugging info. */
1065 #if ((TARGET_CPU_DEFAULT | TARGET_DEFAULT) & MASK_GAS) != 0
1067 #define MDEBUG_ASM_SPEC "%{!gdwarf*:-mdebug} %{gdwarf*:-no-mdebug}"
1069 #define MDEBUG_ASM_SPEC ""
1070 #endif /* not GAS */
1072 /* SUBTARGET_ASM_SPEC is always passed to the assembler. It may be
1073 overridden by subtargets. */
1075 #ifndef SUBTARGET_ASM_SPEC
1076 #define SUBTARGET_ASM_SPEC ""
1079 /* ASM_SPEC is the set of arguments to pass to the assembler. Note: we
1080 pass -mgp32, -mgp64, -march, -mabi=eabi and -meabi=o64 regardless of
1081 whether we're using GAS. These options can only be used properly
1082 with GAS, and it is better to get an error from a non-GAS assembler
1083 than to silently generate bad code. */
1087 %{G*} %(endian_spec) %{mips1} %{mips2} %{mips3} %{mips4} \
1088 %{mips32} %{mips32r2} %{mips64} \
1089 %{mips16:%{!mno-mips16:-mips16}} %{mno-mips16:-no-mips16} \
1090 %(subtarget_asm_optimizing_spec) \
1091 %(subtarget_asm_debugging_spec) \
1093 %{mabi=32:-32}%{mabi=n32:-n32}%{mabi=64:-64}%{mabi=n64:-64} \
1094 %{mabi=eabi} %{mabi=o64} %{!mabi*: %(asm_abi_default_spec)} \
1095 %{mgp32} %{mgp64} %{march=*} %{mxgot:-xgot} \
1096 %(target_asm_spec) \
1097 %(subtarget_asm_spec)"
1099 /* Extra switches sometimes passed to the linker. */
1100 /* ??? The bestGnum will never be passed to the linker, because the gcc driver
1101 will interpret it as a -b option. */
1104 #define LINK_SPEC "\
1106 %{G*} %{mips1} %{mips2} %{mips3} %{mips4} %{mips32} %{mips32r2} %{mips64} \
1107 %{bestGnum} %{shared} %{non_shared}"
1108 #endif /* LINK_SPEC defined */
1111 /* Specs for the compiler proper */
1113 /* SUBTARGET_CC1_SPEC is passed to the compiler proper. It may be
1114 overridden by subtargets. */
1115 #ifndef SUBTARGET_CC1_SPEC
1116 #define SUBTARGET_CC1_SPEC ""
1119 /* CC1_SPEC is the set of arguments to pass to the compiler proper. */
1123 %{gline:%{!g:%{!g0:%{!g1:%{!g2: -g1}}}}} \
1124 %{G*} %{EB:-meb} %{EL:-mel} %{EB:%{EL:%emay not use both -EB and -EL}} \
1126 %(subtarget_cc1_spec)"
1129 /* Preprocessor specs. */
1131 /* SUBTARGET_CPP_SPEC is passed to the preprocessor. It may be
1132 overridden by subtargets. */
1133 #ifndef SUBTARGET_CPP_SPEC
1134 #define SUBTARGET_CPP_SPEC ""
1137 #define CPP_SPEC "%(subtarget_cpp_spec)"
1139 /* This macro defines names of additional specifications to put in the specs
1140 that can be used in various specifications like CC1_SPEC. Its definition
1141 is an initializer with a subgrouping for each command option.
1143 Each subgrouping contains a string constant, that defines the
1144 specification name, and a string constant that used by the GCC driver
1147 Do not define this macro if it does not need to do anything. */
1149 #define EXTRA_SPECS \
1150 { "subtarget_cc1_spec", SUBTARGET_CC1_SPEC }, \
1151 { "subtarget_cpp_spec", SUBTARGET_CPP_SPEC }, \
1152 { "mips_as_asm_spec", MIPS_AS_ASM_SPEC }, \
1153 { "gas_asm_spec", GAS_ASM_SPEC }, \
1154 { "target_asm_spec", TARGET_ASM_SPEC }, \
1155 { "subtarget_mips_as_asm_spec", SUBTARGET_MIPS_AS_ASM_SPEC }, \
1156 { "subtarget_asm_optimizing_spec", SUBTARGET_ASM_OPTIMIZING_SPEC }, \
1157 { "subtarget_asm_debugging_spec", SUBTARGET_ASM_DEBUGGING_SPEC }, \
1158 { "mdebug_asm_spec", MDEBUG_ASM_SPEC }, \
1159 { "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \
1160 { "asm_abi_default_spec", ASM_ABI_DEFAULT_SPEC }, \
1161 { "endian_spec", ENDIAN_SPEC }, \
1162 SUBTARGET_EXTRA_SPECS
1164 #ifndef SUBTARGET_EXTRA_SPECS
1165 #define SUBTARGET_EXTRA_SPECS
1168 /* If defined, this macro is an additional prefix to try after
1169 `STANDARD_EXEC_PREFIX'. */
1171 #ifndef MD_EXEC_PREFIX
1172 #define MD_EXEC_PREFIX "/usr/lib/cmplrs/cc/"
1175 #ifndef MD_STARTFILE_PREFIX
1176 #define MD_STARTFILE_PREFIX "/usr/lib/cmplrs/cc/"
1180 #define DBX_DEBUGGING_INFO 1 /* generate stabs (OSF/rose) */
1181 #define MIPS_DEBUGGING_INFO 1 /* MIPS specific debugging info */
1183 /* By default, turn on GDB extensions. */
1184 #define DEFAULT_GDB_EXTENSIONS 1
1186 /* If we are passing smuggling stabs through the MIPS ECOFF object
1187 format, put a comment in front of the .stab<x> operation so
1188 that the MIPS assembler does not choke. The mips-tfile program
1189 will correctly put the stab into the object file. */
1191 #define ASM_STABS_OP ((TARGET_GAS) ? "\t.stabs\t" : " #.stabs\t")
1192 #define ASM_STABN_OP ((TARGET_GAS) ? "\t.stabn\t" : " #.stabn\t")
1193 #define ASM_STABD_OP ((TARGET_GAS) ? "\t.stabd\t" : " #.stabd\t")
1195 /* Local compiler-generated symbols must have a prefix that the assembler
1196 understands. By default, this is $, although some targets (e.g.,
1197 NetBSD-ELF) need to override this. */
1199 #ifndef LOCAL_LABEL_PREFIX
1200 #define LOCAL_LABEL_PREFIX "$"
1203 /* By default on the mips, external symbols do not have an underscore
1204 prepended, but some targets (e.g., NetBSD) require this. */
1206 #ifndef USER_LABEL_PREFIX
1207 #define USER_LABEL_PREFIX ""
1210 /* On Sun 4, this limit is 2048. We use 1500 to be safe,
1211 since the length can run past this up to a continuation point. */
1212 #undef DBX_CONTIN_LENGTH
1213 #define DBX_CONTIN_LENGTH 1500
1215 /* How to renumber registers for dbx and gdb. */
1216 #define DBX_REGISTER_NUMBER(REGNO) mips_dbx_regno[ (REGNO) ]
1218 /* The mapping from gcc register number to DWARF 2 CFA column number. */
1219 #define DWARF_FRAME_REGNUM(REG) \
1220 (REG == GP_REG_FIRST + 31 ? DWARF_FRAME_RETURN_COLUMN : REG)
1222 /* The DWARF 2 CFA column which tracks the return address. */
1223 #define DWARF_FRAME_RETURN_COLUMN (FP_REG_LAST + 1)
1225 /* Before the prologue, RA lives in r31. */
1226 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (VOIDmode, GP_REG_FIRST + 31)
1228 /* Describe how we implement __builtin_eh_return. */
1229 #define EH_RETURN_DATA_REGNO(N) \
1230 ((N) < (TARGET_MIPS16 ? 2 : 4) ? (N) + GP_ARG_FIRST : INVALID_REGNUM)
1232 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, GP_REG_FIRST + 3)
1234 /* Offsets recorded in opcodes are a multiple of this alignment factor.
1235 The default for this in 64-bit mode is 8, which causes problems with
1236 SFmode register saves. */
1237 #define DWARF_CIE_DATA_ALIGNMENT 4
1239 #define FIND_BASE_TERM(X) mips_delegitimize_address (X)
1241 /* Correct the offset of automatic variables and arguments. Note that
1242 the MIPS debug format wants all automatic variables and arguments
1243 to be in terms of the virtual frame pointer (stack pointer before
1244 any adjustment in the function), while the MIPS 3.0 linker wants
1245 the frame pointer to be the stack pointer after the initial
1248 #define DEBUGGER_AUTO_OFFSET(X) \
1249 mips_debugger_offset (X, (HOST_WIDE_INT) 0)
1250 #define DEBUGGER_ARG_OFFSET(OFFSET, X) \
1251 mips_debugger_offset (X, (HOST_WIDE_INT) OFFSET)
1253 /* Target machine storage layout */
1255 #define BITS_BIG_ENDIAN 0
1256 #define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
1257 #define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
1259 /* Define this to set the endianness to use in libgcc2.c, which can
1260 not depend on target_flags. */
1261 #if !defined(MIPSEL) && !defined(__MIPSEL__)
1262 #define LIBGCC2_WORDS_BIG_ENDIAN 1
1264 #define LIBGCC2_WORDS_BIG_ENDIAN 0
1267 #define MAX_BITS_PER_WORD 64
1269 /* Width of a word, in units (bytes). */
1270 #define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
1271 #define MIN_UNITS_PER_WORD 4
1273 /* For MIPS, width of a floating point register. */
1274 #define UNITS_PER_FPREG (TARGET_FLOAT64 ? 8 : 4)
1276 /* If register $f0 holds a floating-point value, $f(0 + FP_INC) is
1277 the next available register. */
1278 #define FP_INC (TARGET_FLOAT64 || TARGET_SINGLE_FLOAT ? 1 : 2)
1280 /* The largest size of value that can be held in floating-point
1281 registers and moved with a single instruction. */
1282 #define UNITS_PER_HWFPVALUE (TARGET_SOFT_FLOAT ? 0 : FP_INC * UNITS_PER_FPREG)
1284 /* The largest size of value that can be held in floating-point
1286 #define UNITS_PER_FPVALUE \
1287 (TARGET_SOFT_FLOAT ? 0 : (LONG_DOUBLE_TYPE_SIZE / BITS_PER_UNIT))
1289 /* The number of bytes in a double. */
1290 #define UNITS_PER_DOUBLE (TYPE_PRECISION (double_type_node) / BITS_PER_UNIT)
1292 /* Tell the preprocessor the maximum size of wchar_t. */
1293 #ifndef MAX_WCHAR_TYPE_SIZE
1294 #ifndef WCHAR_TYPE_SIZE
1295 #define MAX_WCHAR_TYPE_SIZE 64
1299 /* Set the sizes of the core types. */
1300 #define SHORT_TYPE_SIZE 16
1301 #define INT_TYPE_SIZE (TARGET_INT64 ? 64 : 32)
1302 #define LONG_TYPE_SIZE (TARGET_LONG64 ? 64 : 32)
1303 #define LONG_LONG_TYPE_SIZE 64
1305 #define MAX_LONG_TYPE_SIZE 64
1307 #define FLOAT_TYPE_SIZE 32
1308 #define DOUBLE_TYPE_SIZE 64
1309 #define LONG_DOUBLE_TYPE_SIZE \
1310 (mips_abi == ABI_N32 || mips_abi == ABI_64 ? 128 : 64)
1312 /* long double is not a fixed mode, but the idea is that, if we
1313 support long double, we also want a 128-bit integer type. */
1314 #define MAX_FIXED_MODE_SIZE LONG_DOUBLE_TYPE_SIZE
1317 #if (defined _ABIN32 && _MIPS_SIM == _ABIN32) \
1318 || (defined _ABI64 && _MIPS_SIM == _ABI64)
1319 # define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128
1321 # define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
1325 /* Width in bits of a pointer. */
1326 #ifndef POINTER_SIZE
1327 #define POINTER_SIZE ((TARGET_LONG64 && TARGET_64BIT) ? 64 : 32)
1330 #define POINTERS_EXTEND_UNSIGNED 0
1332 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
1333 #define PARM_BOUNDARY ((mips_abi == ABI_O64 || mips_abi == ABI_N32 \
1334 || mips_abi == ABI_64 \
1335 || (mips_abi == ABI_EABI && TARGET_64BIT)) ? 64 : 32)
1338 /* Allocation boundary (in *bits*) for the code of a function. */
1339 #define FUNCTION_BOUNDARY 32
1341 /* Alignment of field after `int : 0' in a structure. */
1342 #define EMPTY_FIELD_BOUNDARY 32
1344 /* Every structure's size must be a multiple of this. */
1345 /* 8 is observed right on a DECstation and on riscos 4.02. */
1346 #define STRUCTURE_SIZE_BOUNDARY 8
1348 /* There is no point aligning anything to a rounder boundary than this. */
1349 #define BIGGEST_ALIGNMENT LONG_DOUBLE_TYPE_SIZE
1351 /* All accesses must be aligned. */
1352 #define STRICT_ALIGNMENT 1
1354 /* Define this if you wish to imitate the way many other C compilers
1355 handle alignment of bitfields and the structures that contain
1358 The behavior is that the type written for a bit-field (`int',
1359 `short', or other integer type) imposes an alignment for the
1360 entire structure, as if the structure really did contain an
1361 ordinary field of that type. In addition, the bit-field is placed
1362 within the structure so that it would fit within such a field,
1363 not crossing a boundary for it.
1365 Thus, on most machines, a bit-field whose type is written as `int'
1366 would not cross a four-byte boundary, and would force four-byte
1367 alignment for the whole structure. (The alignment used may not
1368 be four bytes; it is controlled by the other alignment
1371 If the macro is defined, its definition should be a C expression;
1372 a nonzero value for the expression enables this behavior. */
1374 #define PCC_BITFIELD_TYPE_MATTERS 1
1376 /* If defined, a C expression to compute the alignment given to a
1377 constant that is being placed in memory. CONSTANT is the constant
1378 and ALIGN is the alignment that the object would ordinarily have.
1379 The value of this macro is used instead of that alignment to align
1382 If this macro is not defined, then ALIGN is used.
1384 The typical use of this macro is to increase alignment for string
1385 constants to be word aligned so that `strcpy' calls that copy
1386 constants can be done inline. */
1388 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
1389 ((TREE_CODE (EXP) == STRING_CST || TREE_CODE (EXP) == CONSTRUCTOR) \
1390 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
1392 /* If defined, a C expression to compute the alignment for a static
1393 variable. TYPE is the data type, and ALIGN is the alignment that
1394 the object would ordinarily have. The value of this macro is used
1395 instead of that alignment to align the object.
1397 If this macro is not defined, then ALIGN is used.
1399 One use of this macro is to increase alignment of medium-size
1400 data to make it all fit in fewer cache lines. Another is to
1401 cause character arrays to be word-aligned so that `strcpy' calls
1402 that copy constants to character arrays can be done inline. */
1404 #undef DATA_ALIGNMENT
1405 #define DATA_ALIGNMENT(TYPE, ALIGN) \
1406 ((((ALIGN) < BITS_PER_WORD) \
1407 && (TREE_CODE (TYPE) == ARRAY_TYPE \
1408 || TREE_CODE (TYPE) == UNION_TYPE \
1409 || TREE_CODE (TYPE) == RECORD_TYPE)) ? BITS_PER_WORD : (ALIGN))
1412 #define PAD_VARARGS_DOWN \
1413 (FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
1415 /* Arguments declared as 'char' or 'short' in a prototype should be
1416 passed as 'int's. */
1417 #define PROMOTE_PROTOTYPES 1
1419 /* Define if operations between registers always perform the operation
1420 on the full register even if a narrower mode is specified. */
1421 #define WORD_REGISTER_OPERATIONS
1423 /* When in 64 bit mode, move insns will sign extend SImode and CCmode
1424 moves. All other references are zero extended. */
1425 #define LOAD_EXTEND_OP(MODE) \
1426 (TARGET_64BIT && ((MODE) == SImode || (MODE) == CCmode) \
1427 ? SIGN_EXTEND : ZERO_EXTEND)
1429 /* Define this macro if it is advisable to hold scalars in registers
1430 in a wider mode than that declared by the program. In such cases,
1431 the value is constrained to be within the bounds of the declared
1432 type, but kept valid in the wider mode. The signedness of the
1433 extension may differ from that of the type. */
1435 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
1436 if (GET_MODE_CLASS (MODE) == MODE_INT \
1437 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
1439 if ((MODE) == SImode) \
1444 /* Define if loading short immediate values into registers sign extends. */
1445 #define SHORT_IMMEDIATES_SIGN_EXTEND
1448 /* Define this if function arguments should also be promoted using the above
1450 #define PROMOTE_FUNCTION_ARGS
1452 /* Likewise, if the function return value is promoted. */
1453 #define PROMOTE_FUNCTION_RETURN
1456 /* Standard register usage. */
1458 /* Number of hardware registers. We have:
1460 - 32 integer registers
1461 - 32 floating point registers
1462 - 8 condition code registers
1463 - 2 accumulator registers (hi and lo)
1464 - 32 registers each for coprocessors 0, 2 and 3
1465 - 6 dummy entries that were used at various times in the past. */
1467 #define FIRST_PSEUDO_REGISTER 176
1469 /* By default, fix the kernel registers ($26 and $27), the global
1470 pointer ($28) and the stack pointer ($29). This can change
1471 depending on the command-line options.
1473 Regarding coprocessor registers: without evidence to the contrary,
1474 it's best to assume that each coprocessor register has a unique
1475 use. This can be overridden, in, e.g., override_options() or
1476 CONDITIONAL_REGISTER_USAGE should the assumption be inappropriate
1477 for a particular target. */
1479 #define FIXED_REGISTERS \
1481 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1482 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, \
1483 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1484 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1485 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, \
1486 /* COP0 registers */ \
1487 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1488 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1489 /* COP2 registers */ \
1490 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1491 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1492 /* COP3 registers */ \
1493 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1494 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 \
1498 /* Set up this array for o32 by default.
1500 Note that we don't mark $31 as a call-clobbered register. The idea is
1501 that it's really the call instructions themselves which clobber $31.
1502 We don't care what the called function does with it afterwards.
1504 This approach makes it easier to implement sibcalls. Unlike normal
1505 calls, sibcalls don't clobber $31, so the register reaches the
1506 called function in tact. EPILOGUE_USES says that $31 is useful
1507 to the called function. */
1509 #define CALL_USED_REGISTERS \
1511 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1512 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, \
1513 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1514 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1515 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1516 /* COP0 registers */ \
1517 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1518 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1519 /* COP2 registers */ \
1520 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1521 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1522 /* COP3 registers */ \
1523 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1524 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 \
1528 /* Define this since $28, though fixed, is call-saved in many ABIs. */
1530 #define CALL_REALLY_USED_REGISTERS \
1531 { /* General registers. */ \
1532 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1533 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, \
1534 /* Floating-point registers. */ \
1535 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1536 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1538 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1539 /* COP0 registers */ \
1540 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1541 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1542 /* COP2 registers */ \
1543 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1544 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1545 /* COP3 registers */ \
1546 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1547 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 \
1550 /* Internal macros to classify a register number as to whether it's a
1551 general purpose register, a floating point register, a
1552 multiply/divide register, or a status register. */
1554 #define GP_REG_FIRST 0
1555 #define GP_REG_LAST 31
1556 #define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1)
1557 #define GP_DBX_FIRST 0
1559 #define FP_REG_FIRST 32
1560 #define FP_REG_LAST 63
1561 #define FP_REG_NUM (FP_REG_LAST - FP_REG_FIRST + 1)
1562 #define FP_DBX_FIRST ((write_symbols == DBX_DEBUG) ? 38 : 32)
1564 #define MD_REG_FIRST 64
1565 #define MD_REG_LAST 65
1566 #define MD_REG_NUM (MD_REG_LAST - MD_REG_FIRST + 1)
1567 #define MD_DBX_FIRST (FP_DBX_FIRST + FP_REG_NUM)
1569 #define ST_REG_FIRST 67
1570 #define ST_REG_LAST 74
1571 #define ST_REG_NUM (ST_REG_LAST - ST_REG_FIRST + 1)
1574 /* FIXME: renumber. */
1575 #define COP0_REG_FIRST 80
1576 #define COP0_REG_LAST 111
1577 #define COP0_REG_NUM (COP0_REG_LAST - COP0_REG_FIRST + 1)
1579 #define COP2_REG_FIRST 112
1580 #define COP2_REG_LAST 143
1581 #define COP2_REG_NUM (COP2_REG_LAST - COP2_REG_FIRST + 1)
1583 #define COP3_REG_FIRST 144
1584 #define COP3_REG_LAST 175
1585 #define COP3_REG_NUM (COP3_REG_LAST - COP3_REG_FIRST + 1)
1586 /* ALL_COP_REG_NUM assumes that COP0,2,and 3 are numbered consecutively. */
1587 #define ALL_COP_REG_NUM (COP3_REG_LAST - COP0_REG_FIRST + 1)
1589 #define AT_REGNUM (GP_REG_FIRST + 1)
1590 #define HI_REGNUM (MD_REG_FIRST + 0)
1591 #define LO_REGNUM (MD_REG_FIRST + 1)
1593 /* FPSW_REGNUM is the single condition code used if !ISA_HAS_8CC.
1594 If ISA_HAS_8CC, it should not be used, and an arbitrary ST_REG
1595 should be used instead. */
1596 #define FPSW_REGNUM ST_REG_FIRST
1598 #define GP_REG_P(REGNO) \
1599 ((unsigned int) ((int) (REGNO) - GP_REG_FIRST) < GP_REG_NUM)
1600 #define M16_REG_P(REGNO) \
1601 (((REGNO) >= 2 && (REGNO) <= 7) || (REGNO) == 16 || (REGNO) == 17)
1602 #define FP_REG_P(REGNO) \
1603 ((unsigned int) ((int) (REGNO) - FP_REG_FIRST) < FP_REG_NUM)
1604 #define MD_REG_P(REGNO) \
1605 ((unsigned int) ((int) (REGNO) - MD_REG_FIRST) < MD_REG_NUM)
1606 #define ST_REG_P(REGNO) \
1607 ((unsigned int) ((int) (REGNO) - ST_REG_FIRST) < ST_REG_NUM)
1608 #define COP0_REG_P(REGNO) \
1609 ((unsigned int) ((int) (REGNO) - COP0_REG_FIRST) < COP0_REG_NUM)
1610 #define COP2_REG_P(REGNO) \
1611 ((unsigned int) ((int) (REGNO) - COP2_REG_FIRST) < COP2_REG_NUM)
1612 #define COP3_REG_P(REGNO) \
1613 ((unsigned int) ((int) (REGNO) - COP3_REG_FIRST) < COP3_REG_NUM)
1614 #define ALL_COP_REG_P(REGNO) \
1615 ((unsigned int) ((int) (REGNO) - COP0_REG_FIRST) < ALL_COP_REG_NUM)
1617 #define FP_REG_RTX_P(X) (GET_CODE (X) == REG && FP_REG_P (REGNO (X)))
1619 /* Return coprocessor number from register number. */
1621 #define COPNUM_AS_CHAR_FROM_REGNUM(REGNO) \
1622 (COP0_REG_P (REGNO) ? '0' : COP2_REG_P (REGNO) ? '2' \
1623 : COP3_REG_P (REGNO) ? '3' : '?')
1626 #define HARD_REGNO_NREGS(REGNO, MODE) mips_hard_regno_nregs (REGNO, MODE)
1628 /* To make the code simpler, HARD_REGNO_MODE_OK just references an
1629 array built in override_options. Because machmodes.h is not yet
1630 included before this file is processed, the MODE bound can't be
1633 extern char mips_hard_regno_mode_ok[][FIRST_PSEUDO_REGISTER];
1635 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
1636 mips_hard_regno_mode_ok[ (int)(MODE) ][ (REGNO) ]
1638 /* Value is 1 if it is a good idea to tie two pseudo registers
1639 when one has mode MODE1 and one has mode MODE2.
1640 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
1641 for any hard reg, then this must be 0 for correct output. */
1642 #define MODES_TIEABLE_P(MODE1, MODE2) \
1643 ((GET_MODE_CLASS (MODE1) == MODE_FLOAT || \
1644 GET_MODE_CLASS (MODE1) == MODE_COMPLEX_FLOAT) \
1645 == (GET_MODE_CLASS (MODE2) == MODE_FLOAT || \
1646 GET_MODE_CLASS (MODE2) == MODE_COMPLEX_FLOAT))
1648 /* Register to use for pushing function arguments. */
1649 #define STACK_POINTER_REGNUM (GP_REG_FIRST + 29)
1651 /* Base register for access to local variables of the function. We
1652 pretend that the frame pointer is $1, and then eliminate it to
1653 HARD_FRAME_POINTER_REGNUM. We can get away with this because $1 is
1654 a fixed register, and will not be used for anything else. */
1655 #define FRAME_POINTER_REGNUM (GP_REG_FIRST + 1)
1657 /* $30 is not available on the mips16, so we use $17 as the frame
1659 #define HARD_FRAME_POINTER_REGNUM \
1660 (TARGET_MIPS16 ? GP_REG_FIRST + 17 : GP_REG_FIRST + 30)
1662 /* Value should be nonzero if functions must have frame pointers.
1663 Zero means the frame pointer need not be set up (and parms
1664 may be accessed via the stack pointer) in functions that seem suitable.
1665 This is computed in `reload', in reload1.c. */
1666 #define FRAME_POINTER_REQUIRED (current_function_calls_alloca)
1668 /* Base register for access to arguments of the function. */
1669 #define ARG_POINTER_REGNUM GP_REG_FIRST
1671 /* Register in which static-chain is passed to a function. */
1672 #define STATIC_CHAIN_REGNUM (GP_REG_FIRST + 2)
1674 /* Pass structure addresses as an "invisible" first argument. */
1675 #define STRUCT_VALUE 0
1677 /* Registers used as temporaries in prologue/epilogue code. If we're
1678 generating mips16 code, these registers must come from the core set
1679 of 8. The prologue register mustn't conflict with any incoming
1680 arguments, the static chain pointer, or the frame pointer. The
1681 epilogue temporary mustn't conflict with the return registers, the
1682 frame pointer, the EH stack adjustment, or the EH data registers. */
1684 #define MIPS_PROLOGUE_TEMP_REGNUM (GP_REG_FIRST + 3)
1685 #define MIPS_EPILOGUE_TEMP_REGNUM (GP_REG_FIRST + (TARGET_MIPS16 ? 6 : 8))
1687 #define MIPS_PROLOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_PROLOGUE_TEMP_REGNUM)
1688 #define MIPS_EPILOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_EPILOGUE_TEMP_REGNUM)
1690 /* Define this macro if it is as good or better to call a constant
1691 function address than to call an address kept in a register. */
1692 #define NO_FUNCTION_CSE 1
1694 /* Define this macro if it is as good or better for a function to
1695 call itself with an explicit address than to call an address
1696 kept in a register. */
1697 #define NO_RECURSIVE_FUNCTION_CSE 1
1699 /* The ABI-defined global pointer. Sometimes we use a different
1700 register in leaf functions: see PIC_OFFSET_TABLE_REGNUM. */
1701 #define GLOBAL_POINTER_REGNUM (GP_REG_FIRST + 28)
1703 /* We normally use $28 as the global pointer. However, when generating
1704 n32/64 PIC, it is better for leaf functions to use a call-clobbered
1705 register instead. They can then avoid saving and restoring $28
1706 and perhaps avoid using a frame at all.
1708 When a leaf function uses something other than $28, mips_expand_prologue
1709 will modify pic_offset_table_rtx in place. Take the register number
1710 from there after reload. */
1711 #define PIC_OFFSET_TABLE_REGNUM \
1712 (reload_completed ? REGNO (pic_offset_table_rtx) : GLOBAL_POINTER_REGNUM)
1714 #define PIC_FUNCTION_ADDR_REGNUM (GP_REG_FIRST + 25)
1716 /* Define the classes of registers for register constraints in the
1717 machine description. Also define ranges of constants.
1719 One of the classes must always be named ALL_REGS and include all hard regs.
1720 If there is more than one class, another class must be named NO_REGS
1721 and contain no registers.
1723 The name GENERAL_REGS must be the name of a class (or an alias for
1724 another name such as ALL_REGS). This is the class of registers
1725 that is allowed by "g" or "r" in a register constraint.
1726 Also, registers outside this class are allocated only when
1727 instructions express preferences for them.
1729 The classes must be numbered in nondecreasing order; that is,
1730 a larger-numbered class must never be contained completely
1731 in a smaller-numbered class.
1733 For any two classes, it is very desirable that there be another
1734 class that represents their union. */
1738 NO_REGS, /* no registers in set */
1739 M16_NA_REGS, /* mips16 regs not used to pass args */
1740 M16_REGS, /* mips16 directly accessible registers */
1741 T_REG, /* mips16 T register ($24) */
1742 M16_T_REGS, /* mips16 registers plus T register */
1743 PIC_FN_ADDR_REG, /* SVR4 PIC function address register */
1744 LEA_REGS, /* Every GPR except $25 */
1745 GR_REGS, /* integer registers */
1746 FP_REGS, /* floating point registers */
1747 HI_REG, /* hi register */
1748 LO_REG, /* lo register */
1749 MD_REGS, /* multiply/divide registers (hi/lo) */
1750 COP0_REGS, /* generic coprocessor classes */
1753 HI_AND_GR_REGS, /* union classes */
1760 ALL_COP_AND_GR_REGS,
1761 ST_REGS, /* status registers (fp status) */
1762 ALL_REGS, /* all registers */
1763 LIM_REG_CLASSES /* max value + 1 */
1766 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1768 #define GENERAL_REGS GR_REGS
1770 /* An initializer containing the names of the register classes as C
1771 string constants. These names are used in writing some of the
1774 #define REG_CLASS_NAMES \
1781 "PIC_FN_ADDR_REG", \
1788 /* coprocessor registers */ \
1795 "COP0_AND_GR_REGS", \
1796 "COP2_AND_GR_REGS", \
1797 "COP3_AND_GR_REGS", \
1799 "ALL_COP_AND_GR_REGS", \
1804 /* An initializer containing the contents of the register classes,
1805 as integers which are bit masks. The Nth integer specifies the
1806 contents of class N. The way the integer MASK is interpreted is
1807 that register R is in the class if `MASK & (1 << R)' is 1.
1809 When the machine has more than 32 registers, an integer does not
1810 suffice. Then the integers are replaced by sub-initializers,
1811 braced groupings containing several integers. Each
1812 sub-initializer must be suitable as an initializer for the type
1813 `HARD_REG_SET' which is defined in `hard-reg-set.h'. */
1815 #define REG_CLASS_CONTENTS \
1817 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* no registers */ \
1818 { 0x0003000c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 nonarg regs */\
1819 { 0x000300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 registers */ \
1820 { 0x01000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 T register */ \
1821 { 0x010300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* mips16 and T regs */ \
1822 { 0x02000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* SVR4 PIC function address register */ \
1823 { 0xfdffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* Every other GPR */ \
1824 { 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* integer registers */ \
1825 { 0x00000000, 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* floating registers*/ \
1826 { 0x00000000, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* hi register */ \
1827 { 0x00000000, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, /* lo register */ \
1828 { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000 }, /* mul/div registers */ \
1829 { 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000, 0x00000000 }, /* cop0 registers */ \
1830 { 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000 }, /* cop2 registers */ \
1831 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff }, /* cop3 registers */ \
1832 { 0xffffffff, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* union classes */ \
1833 { 0xffffffff, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, \
1834 { 0x00000000, 0xffffffff, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, \
1835 { 0xffffffff, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000, 0x00000000 }, \
1836 { 0xffffffff, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000 }, \
1837 { 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff }, \
1838 { 0x00000000, 0x00000000, 0xffff0000, 0xffffffff, 0xffffffff, 0x0000ffff }, \
1839 { 0xffffffff, 0x00000000, 0xffff0000, 0xffffffff, 0xffffffff, 0x0000ffff }, \
1840 { 0x00000000, 0x00000000, 0x000007f8, 0x00000000, 0x00000000, 0x00000000 }, /* status registers */ \
1841 { 0xffffffff, 0xffffffff, 0xffff07ff, 0xffffffff, 0xffffffff, 0x0000ffff } /* all registers */ \
1845 /* A C expression whose value is a register class containing hard
1846 register REGNO. In general there is more that one such class;
1847 choose a class which is "minimal", meaning that no smaller class
1848 also contains the register. */
1850 extern const enum reg_class mips_regno_to_class[];
1852 #define REGNO_REG_CLASS(REGNO) mips_regno_to_class[ (REGNO) ]
1854 /* A macro whose definition is the name of the class to which a
1855 valid base register must belong. A base register is one used in
1856 an address which is the register value plus a displacement. */
1858 #define BASE_REG_CLASS (TARGET_MIPS16 ? M16_REGS : GR_REGS)
1860 /* A macro whose definition is the name of the class to which a
1861 valid index register must belong. An index register is one used
1862 in an address where its value is either multiplied by a scale
1863 factor or added to another register (as well as added to a
1866 #define INDEX_REG_CLASS NO_REGS
1868 /* When SMALL_REGISTER_CLASSES is nonzero, the compiler allows
1869 registers explicitly used in the rtl to be used as spill registers
1870 but prevents the compiler from extending the lifetime of these
1873 #define SMALL_REGISTER_CLASSES (TARGET_MIPS16)
1875 /* This macro is used later on in the file. */
1876 #define GR_REG_CLASS_P(CLASS) \
1877 ((CLASS) == GR_REGS || (CLASS) == M16_REGS || (CLASS) == T_REG \
1878 || (CLASS) == M16_T_REGS || (CLASS) == M16_NA_REGS \
1879 || (CLASS) == PIC_FN_ADDR_REG || (CLASS) == LEA_REGS)
1881 /* This macro is also used later on in the file. */
1882 #define COP_REG_CLASS_P(CLASS) \
1883 ((CLASS) == COP0_REGS || (CLASS) == COP2_REGS || (CLASS) == COP3_REGS)
1885 /* REG_ALLOC_ORDER is to order in which to allocate registers. This
1886 is the default value (allocate the registers in numeric order). We
1887 define it just so that we can override it for the mips16 target in
1888 ORDER_REGS_FOR_LOCAL_ALLOC. */
1890 #define REG_ALLOC_ORDER \
1891 { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
1892 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
1893 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
1894 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, \
1895 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
1896 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, \
1897 96, 97, 98, 99, 100,101,102,103,104,105,106,107,108,109,110,111, \
1898 112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127, \
1899 128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143, \
1900 144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159, \
1901 160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175 \
1904 /* ORDER_REGS_FOR_LOCAL_ALLOC is a macro which permits reg_alloc_order
1905 to be rearranged based on a particular function. On the mips16, we
1906 want to allocate $24 (T_REG) before other registers for
1907 instructions for which it is possible. */
1909 #define ORDER_REGS_FOR_LOCAL_ALLOC mips_order_regs_for_local_alloc ()
1911 /* REGISTER AND CONSTANT CLASSES */
1913 /* Get reg_class from a letter such as appears in the machine
1916 DEFINED REGISTER CLASSES:
1918 'd' General (aka integer) registers
1919 Normally this is GR_REGS, but in mips16 mode this is M16_REGS
1920 'y' General registers (in both mips16 and non mips16 mode)
1921 'e' mips16 non argument registers (M16_NA_REGS)
1922 't' mips16 temporary register ($24)
1923 'f' Floating point registers
1926 'x' Multiply/divide registers
1927 'z' FP Status register
1931 'b' All registers */
1933 extern enum reg_class mips_char_to_class[256];
1935 #define REG_CLASS_FROM_LETTER(C) mips_char_to_class[(unsigned char)(C)]
1937 /* True if VALUE is a signed 16-bit number. */
1939 #define SMALL_OPERAND(VALUE) \
1940 ((unsigned HOST_WIDE_INT) (VALUE) + 0x8000 < 0x10000)
1942 /* True if VALUE is an unsigned 16-bit number. */
1944 #define SMALL_OPERAND_UNSIGNED(VALUE) \
1945 (((VALUE) & ~(unsigned HOST_WIDE_INT) 0xffff) == 0)
1947 /* True if VALUE can be loaded into a register using LUI. */
1949 #define LUI_OPERAND(VALUE) \
1950 (((VALUE) | 0x7fff0000) == 0x7fff0000 \
1951 || ((VALUE) | 0x7fff0000) + 0x10000 == 0)
1953 /* Return a value X with the low 16 bits clear, and such that
1954 VALUE - X is a signed 16-bit value. */
1956 #define CONST_HIGH_PART(VALUE) \
1957 (((VALUE) + 0x8000) & ~(unsigned HOST_WIDE_INT) 0xffff)
1959 #define CONST_LOW_PART(VALUE) \
1960 ((VALUE) - CONST_HIGH_PART (VALUE))
1962 #define SMALL_INT(X) SMALL_OPERAND (INTVAL (X))
1963 #define SMALL_INT_UNSIGNED(X) SMALL_OPERAND_UNSIGNED (INTVAL (X))
1964 #define LUI_INT(X) LUI_OPERAND (INTVAL (X))
1966 /* The letters I, J, K, L, M, N, O, and P in a register constraint
1967 string can be used to stand for particular ranges of immediate
1968 operands. This macro defines what the ranges are. C is the
1969 letter, and VALUE is a constant value. Return 1 if VALUE is
1970 in the range specified by C. */
1974 `I' is used for the range of constants an arithmetic insn can
1975 actually contain (16 bits signed integers).
1977 `J' is used for the range which is just zero (ie, $r0).
1979 `K' is used for the range of constants a logical insn can actually
1980 contain (16 bit zero-extended integers).
1982 `L' is used for the range of constants that be loaded with lui
1983 (ie, the bottom 16 bits are zero).
1985 `M' is used for the range of constants that take two words to load
1986 (ie, not matched by `I', `K', and `L').
1988 `N' is used for negative 16 bit constants other than -65536.
1990 `O' is a 15 bit signed integer.
1992 `P' is used for positive 16 bit constants. */
1994 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
1995 ((C) == 'I' ? SMALL_OPERAND (VALUE) \
1996 : (C) == 'J' ? ((VALUE) == 0) \
1997 : (C) == 'K' ? SMALL_OPERAND_UNSIGNED (VALUE) \
1998 : (C) == 'L' ? LUI_OPERAND (VALUE) \
1999 : (C) == 'M' ? (!SMALL_OPERAND (VALUE) \
2000 && !SMALL_OPERAND_UNSIGNED (VALUE) \
2001 && !LUI_OPERAND (VALUE)) \
2002 : (C) == 'N' ? ((unsigned HOST_WIDE_INT) ((VALUE) + 0xffff) < 0xffff) \
2003 : (C) == 'O' ? ((unsigned HOST_WIDE_INT) ((VALUE) + 0x4000) < 0x8000) \
2004 : (C) == 'P' ? ((VALUE) != 0 && (((VALUE) & ~0x0000ffff) == 0)) \
2007 /* Similar, but for floating constants, and defining letters G and H.
2008 Here VALUE is the CONST_DOUBLE rtx itself. */
2012 'G' : Floating point 0 */
2014 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
2016 && (VALUE) == CONST0_RTX (GET_MODE (VALUE)))
2018 /* True if OP is a constant that should not be moved into $25.
2019 We need this because many versions of gas treat 'la $25,foo' as
2020 part of a call sequence and allow a global 'foo' to be lazily bound. */
2022 #define DANGEROUS_FOR_LA25_P(OP) \
2024 && !TARGET_EXPLICIT_RELOCS \
2025 && mips_global_pic_constant_p (OP))
2027 /* Letters in the range `Q' through `U' may be defined in a
2028 machine-dependent fashion to stand for arbitrary operand types.
2029 The machine description macro `EXTRA_CONSTRAINT' is passed the
2030 operand as its first argument and the constraint letter as its
2033 `Q' is for signed 16-bit constants.
2034 `R' is for single-instruction memory references. Note that this
2035 constraint has often been used in linux and glibc code.
2036 `S' is for legitimate constant call addresses.
2037 `T' is for constant move_operands that cannot be safely loaded into $25.
2038 `U' is for constant move_operands that can be safely loaded into $25.
2039 `W' is for memory references that are based on a member of BASE_REG_CLASS.
2040 This is true for all non-mips16 references (although it can somtimes
2041 be indirect if !TARGET_EXPLICIT_RELOCS). For mips16, it excludes
2042 stack and constant-pool references. */
2044 #define EXTRA_CONSTRAINT(OP,CODE) \
2045 (((CODE) == 'Q') ? const_arith_operand (OP, VOIDmode) \
2046 : ((CODE) == 'R') ? (GET_CODE (OP) == MEM \
2047 && mips_fetch_insns (OP) == 1) \
2048 : ((CODE) == 'S') ? (CONSTANT_P (OP) \
2049 && call_insn_operand (OP, VOIDmode)) \
2050 : ((CODE) == 'T') ? (CONSTANT_P (OP) \
2051 && move_operand (OP, VOIDmode) \
2052 && DANGEROUS_FOR_LA25_P (OP)) \
2053 : ((CODE) == 'U') ? (CONSTANT_P (OP) \
2054 && move_operand (OP, VOIDmode) \
2055 && !DANGEROUS_FOR_LA25_P (OP)) \
2056 : ((CODE) == 'W') ? (GET_CODE (OP) == MEM \
2057 && memory_operand (OP, VOIDmode) \
2058 && (!TARGET_MIPS16 \
2059 || (!stack_operand (OP, VOIDmode) \
2060 && !CONSTANT_P (XEXP (OP, 0))))) \
2063 /* Say which of the above are memory constraints. */
2064 #define EXTRA_MEMORY_CONSTRAINT(C, STR) ((C) == 'R' || (C) == 'W')
2066 /* Given an rtx X being reloaded into a reg required to be
2067 in class CLASS, return the class of reg to actually use.
2068 In general this is just CLASS; but on some machines
2069 in some cases it is preferable to use a more restrictive class. */
2071 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
2072 ((CLASS) != ALL_REGS \
2073 ? (! TARGET_MIPS16 \
2075 : ((CLASS) != GR_REGS \
2078 : ((GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \
2079 || GET_MODE_CLASS (GET_MODE (X)) == MODE_COMPLEX_FLOAT) \
2080 ? (TARGET_SOFT_FLOAT \
2081 ? (TARGET_MIPS16 ? M16_REGS : GR_REGS) \
2083 : ((GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \
2084 || GET_MODE (X) == VOIDmode) \
2085 ? (TARGET_MIPS16 ? M16_REGS : GR_REGS) \
2088 /* Certain machines have the property that some registers cannot be
2089 copied to some other registers without using memory. Define this
2090 macro on those machines to be a C expression that is nonzero if
2091 objects of mode MODE in registers of CLASS1 can only be copied to
2092 registers of class CLASS2 by storing a register of CLASS1 into
2093 memory and loading that memory location into a register of CLASS2.
2095 Do not define this macro if its value would always be zero. */
2097 #define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
2098 ((!TARGET_DEBUG_H_MODE \
2099 && GET_MODE_CLASS (MODE) == MODE_INT \
2100 && ((CLASS1 == FP_REGS && GR_REG_CLASS_P (CLASS2)) \
2101 || (GR_REG_CLASS_P (CLASS1) && CLASS2 == FP_REGS))) \
2102 || (TARGET_FLOAT64 && !TARGET_64BIT && (MODE) == DFmode \
2103 && ((GR_REG_CLASS_P (CLASS1) && CLASS2 == FP_REGS) \
2104 || (GR_REG_CLASS_P (CLASS2) && CLASS1 == FP_REGS))))
2106 /* The HI and LO registers can only be reloaded via the general
2107 registers. Condition code registers can only be loaded to the
2108 general registers, and from the floating point registers. */
2110 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
2111 mips_secondary_reload_class (CLASS, MODE, X, 1)
2112 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
2113 mips_secondary_reload_class (CLASS, MODE, X, 0)
2115 /* Return the maximum number of consecutive registers
2116 needed to represent mode MODE in a register of class CLASS. */
2118 #define CLASS_MAX_NREGS(CLASS, MODE) mips_class_max_nregs (CLASS, MODE)
2120 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
2121 mips_cannot_change_mode_class (FROM, TO, CLASS)
2123 /* Stack layout; function entry, exit and calling. */
2125 #define STACK_GROWS_DOWNWARD
2127 /* The offset of the first local variable from the beginning of the frame.
2128 See compute_frame_size for details about the frame layout. */
2129 #define STARTING_FRAME_OFFSET \
2130 (current_function_outgoing_args_size \
2131 + (TARGET_ABICALLS && !TARGET_NEWABI \
2132 ? MIPS_STACK_ALIGN (UNITS_PER_WORD) : 0))
2134 #define RETURN_ADDR_RTX mips_return_addr
2136 /* Since the mips16 ISA mode is encoded in the least-significant bit
2137 of the address, mask it off return addresses for purposes of
2138 finding exception handling regions. */
2140 #define MASK_RETURN_ADDR GEN_INT (-2)
2143 /* Similarly, don't use the least-significant bit to tell pointers to
2144 code from vtable index. */
2146 #define TARGET_PTRMEMFUNC_VBIT_LOCATION ptrmemfunc_vbit_in_delta
2148 /* The eliminations to $17 are only used for mips16 code. See the
2149 definition of HARD_FRAME_POINTER_REGNUM. */
2151 #define ELIMINABLE_REGS \
2152 {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
2153 { ARG_POINTER_REGNUM, GP_REG_FIRST + 30}, \
2154 { ARG_POINTER_REGNUM, GP_REG_FIRST + 17}, \
2155 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
2156 { FRAME_POINTER_REGNUM, GP_REG_FIRST + 30}, \
2157 { FRAME_POINTER_REGNUM, GP_REG_FIRST + 17}}
2159 /* We can always eliminate to the hard frame pointer. We can eliminate
2160 to the stack pointer unless a frame pointer is needed.
2162 In mips16 mode, we need a frame pointer for a large frame; otherwise,
2163 reload may be unable to compute the address of a local variable,
2164 since there is no way to add a large constant to the stack pointer
2165 without using a temporary register. */
2166 #define CAN_ELIMINATE(FROM, TO) \
2167 ((TO) == HARD_FRAME_POINTER_REGNUM \
2168 || ((TO) == STACK_POINTER_REGNUM && !frame_pointer_needed \
2169 && (!TARGET_MIPS16 \
2170 || compute_frame_size (get_frame_size ()) < 32768)))
2172 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
2173 (OFFSET) = mips_initial_elimination_offset ((FROM), (TO))
2175 /* Allocate stack space for arguments at the beginning of each function. */
2176 #define ACCUMULATE_OUTGOING_ARGS 1
2178 /* The argument pointer always points to the first argument. */
2179 #define FIRST_PARM_OFFSET(FNDECL) 0
2181 /* o32 and o64 reserve stack space for all argument registers. */
2182 #define REG_PARM_STACK_SPACE(FNDECL) \
2183 ((mips_abi == ABI_32 || mips_abi == ABI_O64) \
2184 ? (MAX_ARGS_IN_REGISTERS * UNITS_PER_WORD) \
2187 /* Define this if it is the responsibility of the caller to
2188 allocate the area reserved for arguments passed in registers.
2189 If `ACCUMULATE_OUTGOING_ARGS' is also defined, the only effect
2190 of this macro is to determine whether the space is included in
2191 `current_function_outgoing_args_size'. */
2192 #define OUTGOING_REG_PARM_STACK_SPACE
2194 #define STACK_BOUNDARY \
2195 ((mips_abi == ABI_32 || mips_abi == ABI_O64 || mips_abi == ABI_EABI) \
2199 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
2201 /* Symbolic macros for the registers used to return integer and floating
2204 #define GP_RETURN (GP_REG_FIRST + 2)
2205 #define FP_RETURN ((TARGET_SOFT_FLOAT) ? GP_RETURN : (FP_REG_FIRST + 0))
2207 #define MAX_ARGS_IN_REGISTERS \
2208 ((mips_abi == ABI_32 || mips_abi == ABI_O64) ? 4 : 8)
2210 /* Largest possible value of MAX_ARGS_IN_REGISTERS. */
2212 #define BIGGEST_MAX_ARGS_IN_REGISTERS 8
2214 /* Symbolic macros for the first/last argument registers. */
2216 #define GP_ARG_FIRST (GP_REG_FIRST + 4)
2217 #define GP_ARG_LAST (GP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
2218 #define FP_ARG_FIRST (FP_REG_FIRST + 12)
2219 #define FP_ARG_LAST (FP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
2221 #define LIBCALL_VALUE(MODE) \
2222 mips_function_value (NULL_TREE, NULL, (MODE))
2224 #define FUNCTION_VALUE(VALTYPE, FUNC) \
2225 mips_function_value ((VALTYPE), (FUNC), VOIDmode)
2227 /* 1 if N is a possible register number for a function value.
2228 On the MIPS, R2 R3 and F0 F2 are the only register thus used.
2229 Currently, R2 and F0 are only implemented here (C has no complex type) */
2231 #define FUNCTION_VALUE_REGNO_P(N) ((N) == GP_RETURN || (N) == FP_RETURN \
2232 || (LONG_DOUBLE_TYPE_SIZE == 128 && FP_RETURN != GP_RETURN \
2233 && (N) == FP_RETURN + 2))
2235 /* 1 if N is a possible register number for function argument passing.
2236 We have no FP argument registers when soft-float. When FP registers
2237 are 32 bits, we can't directly reference the odd numbered ones. */
2239 #define FUNCTION_ARG_REGNO_P(N) \
2240 ((IN_RANGE((N), GP_ARG_FIRST, GP_ARG_LAST) \
2241 || (IN_RANGE((N), FP_ARG_FIRST, FP_ARG_LAST) \
2242 && ((N) % FP_INC == 0) && mips_abi != ABI_O64)) \
2245 #define RETURN_IN_MEMORY(TYPE) mips_return_in_memory (TYPE)
2247 #define SETUP_INCOMING_VARARGS(CUM,MODE,TYPE,PRETEND_SIZE,NO_RTL) \
2248 (PRETEND_SIZE) = mips_setup_incoming_varargs (&(CUM), (MODE), \
2251 #define STRICT_ARGUMENT_NAMING (mips_abi != ABI_32 && mips_abi != ABI_O64)
2253 /* This structure has to cope with two different argument allocation
2254 schemes. Most MIPS ABIs view the arguments as a struct, of which the
2255 first N words go in registers and the rest go on the stack. If I < N,
2256 the Ith word might go in Ith integer argument register or the
2257 Ith floating-point one. For these ABIs, we only need to remember
2258 the number of words passed so far.
2260 The EABI instead allocates the integer and floating-point arguments
2261 separately. The first N words of FP arguments go in FP registers,
2262 the rest go on the stack. Likewise, the first N words of the other
2263 arguments go in integer registers, and the rest go on the stack. We
2264 need to maintain three counts: the number of integer registers used,
2265 the number of floating-point registers used, and the number of words
2266 passed on the stack.
2268 We could keep separate information for the two ABIs (a word count for
2269 the standard ABIs, and three separate counts for the EABI). But it
2270 seems simpler to view the standard ABIs as forms of EABI that do not
2271 allocate floating-point registers.
2273 So for the standard ABIs, the first N words are allocated to integer
2274 registers, and function_arg decides on an argument-by-argument basis
2275 whether that argument should really go in an integer register, or in
2276 a floating-point one. */
2278 typedef struct mips_args {
2279 /* Always true for varargs functions. Otherwise true if at least
2280 one argument has been passed in an integer register. */
2283 /* The number of arguments seen so far. */
2284 unsigned int arg_number;
2286 /* For EABI, the number of integer registers used so far. For other
2287 ABIs, the number of words passed in registers (whether integer
2288 or floating-point). */
2289 unsigned int num_gprs;
2291 /* For EABI, the number of floating-point registers used so far. */
2292 unsigned int num_fprs;
2294 /* The number of words passed on the stack. */
2295 unsigned int stack_words;
2297 /* On the mips16, we need to keep track of which floating point
2298 arguments were passed in general registers, but would have been
2299 passed in the FP regs if this were a 32 bit function, so that we
2300 can move them to the FP regs if we wind up calling a 32 bit
2301 function. We record this information in fp_code, encoded in base
2302 four. A zero digit means no floating point argument, a one digit
2303 means an SFmode argument, and a two digit means a DFmode argument,
2304 and a three digit is not used. The low order digit is the first
2305 argument. Thus 6 == 1 * 4 + 2 means a DFmode argument followed by
2306 an SFmode argument. ??? A more sophisticated approach will be
2307 needed if MIPS_ABI != ABI_32. */
2310 /* True if the function has a prototype. */
2314 /* Initialize a variable CUM of type CUMULATIVE_ARGS
2315 for a call to a function whose data type is FNTYPE.
2316 For a library call, FNTYPE is 0.
2320 #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT) \
2321 init_cumulative_args (&CUM, FNTYPE, LIBNAME) \
2323 /* Update the data in CUM to advance over an argument
2324 of mode MODE and data type TYPE.
2325 (TYPE is null for libcalls where that information may not be available.) */
2327 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
2328 function_arg_advance (&CUM, MODE, TYPE, NAMED)
2330 /* Determine where to put an argument to a function.
2331 Value is zero to push the argument on the stack,
2332 or a hard register in which to store the argument.
2334 MODE is the argument's machine mode.
2335 TYPE is the data type of the argument (as a tree).
2336 This is null for libcalls where that information may
2338 CUM is a variable of type CUMULATIVE_ARGS which gives info about
2339 the preceding args and about the function being called.
2340 NAMED is nonzero if this argument is a named parameter
2341 (otherwise it is an extra parameter matching an ellipsis). */
2343 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
2344 function_arg( &CUM, MODE, TYPE, NAMED)
2346 /* For an arg passed partly in registers and partly in memory,
2347 this is the number of registers used.
2348 For args passed entirely in registers or entirely in memory, zero. */
2350 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
2351 function_arg_partial_nregs (&CUM, MODE, TYPE, NAMED)
2353 /* If defined, a C expression that gives the alignment boundary, in
2354 bits, of an argument with the specified mode and type. If it is
2355 not defined, `PARM_BOUNDARY' is used for all arguments. */
2357 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
2359 ? ((TYPE_ALIGN(TYPE) <= PARM_BOUNDARY) \
2361 : TYPE_ALIGN(TYPE)) \
2362 : ((GET_MODE_ALIGNMENT(MODE) <= PARM_BOUNDARY) \
2364 : GET_MODE_ALIGNMENT(MODE)))
2366 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
2367 function_arg_pass_by_reference (&CUM, MODE, TYPE, NAMED)
2369 #define FUNCTION_ARG_PADDING(MODE, TYPE) \
2370 (mips_pad_arg_upward (MODE, TYPE) ? upward : downward)
2372 #define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
2373 (mips_pad_reg_upward (MODE, TYPE) ? upward : downward)
2375 #define FUNCTION_ARG_CALLEE_COPIES(CUM, MODE, TYPE, NAMED) \
2376 (mips_abi == ABI_EABI && (NAMED) \
2377 && FUNCTION_ARG_PASS_BY_REFERENCE (CUM, MODE, TYPE, NAMED))
2379 /* Modified version of the macro in expr.h. Only return true if
2380 the type has a variable size or if the front end requires it
2381 to be passed by reference. */
2382 #define MUST_PASS_IN_STACK(MODE,TYPE) \
2384 && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
2385 || TREE_ADDRESSABLE (TYPE)))
2387 /* True if using EABI and varargs can be passed in floating-point
2388 registers. Under these conditions, we need a more complex form
2389 of va_list, which tracks GPR, FPR and stack arguments separately. */
2390 #define EABI_FLOAT_VARARGS_P \
2391 (mips_abi == ABI_EABI && UNITS_PER_FPVALUE >= UNITS_PER_DOUBLE)
2394 /* Say that the epilogue uses the return address register. Note that
2395 in the case of sibcalls, the values "used by the epilogue" are
2396 considered live at the start of the called function. */
2397 #define EPILOGUE_USES(REGNO) ((REGNO) == 31)
2399 /* Treat LOC as a byte offset from the stack pointer and round it up
2400 to the next fully-aligned offset. */
2401 #define MIPS_STACK_ALIGN(LOC) \
2402 ((mips_abi == ABI_32 || mips_abi == ABI_O64 || mips_abi == ABI_EABI) \
2403 ? ((LOC) + 7) & ~7 \
2404 : ((LOC) + 15) & ~15)
2407 /* Define the `__builtin_va_list' type for the ABI. */
2408 #define BUILD_VA_LIST_TYPE(VALIST) \
2409 (VALIST) = mips_build_va_list ()
2411 /* Implement `va_start' for varargs and stdarg. */
2412 #define EXPAND_BUILTIN_VA_START(valist, nextarg) \
2413 mips_va_start (valist, nextarg)
2415 /* Implement `va_arg'. */
2416 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
2417 mips_va_arg (valist, type)
2419 /* Output assembler code to FILE to increment profiler label # LABELNO
2420 for profiling a function entry. */
2422 #define FUNCTION_PROFILER(FILE, LABELNO) \
2424 if (TARGET_MIPS16) \
2425 sorry ("mips16 function profiling"); \
2426 fprintf (FILE, "\t.set\tnoat\n"); \
2427 fprintf (FILE, "\tmove\t%s,%s\t\t# save current return address\n", \
2428 reg_names[GP_REG_FIRST + 1], reg_names[GP_REG_FIRST + 31]); \
2429 if (mips_abi != ABI_N32 && mips_abi != ABI_64) \
2432 "\t%s\t%s,%s,%d\t\t# _mcount pops 2 words from stack\n", \
2433 TARGET_64BIT ? "dsubu" : "subu", \
2434 reg_names[STACK_POINTER_REGNUM], \
2435 reg_names[STACK_POINTER_REGNUM], \
2436 Pmode == DImode ? 16 : 8); \
2438 fprintf (FILE, "\tjal\t_mcount\n"); \
2439 fprintf (FILE, "\t.set\tat\n"); \
2442 /* Define this macro if the code for function profiling should come
2443 before the function prologue. Normally, the profiling code comes
2446 /* #define PROFILE_BEFORE_PROLOGUE */
2448 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
2449 the stack pointer does not matter. The value is tested only in
2450 functions that have frame pointers.
2451 No definition is equivalent to always zero. */
2453 #define EXIT_IGNORE_STACK 1
2456 /* A C statement to output, on the stream FILE, assembler code for a
2457 block of data that contains the constant parts of a trampoline.
2458 This code should not include a label--the label is taken care of
2461 #define TRAMPOLINE_TEMPLATE(STREAM) \
2463 fprintf (STREAM, "\t.word\t0x03e00821\t\t# move $1,$31\n"); \
2464 fprintf (STREAM, "\t.word\t0x04110001\t\t# bgezal $0,.+8\n"); \
2465 fprintf (STREAM, "\t.word\t0x00000000\t\t# nop\n"); \
2466 if (ptr_mode == DImode) \
2468 fprintf (STREAM, "\t.word\t0xdfe30014\t\t# ld $3,20($31)\n"); \
2469 fprintf (STREAM, "\t.word\t0xdfe2001c\t\t# ld $2,28($31)\n"); \
2473 fprintf (STREAM, "\t.word\t0x8fe30014\t\t# lw $3,20($31)\n"); \
2474 fprintf (STREAM, "\t.word\t0x8fe20018\t\t# lw $2,24($31)\n"); \
2476 fprintf (STREAM, "\t.word\t0x0060c821\t\t# move $25,$3 (abicalls)\n"); \
2477 fprintf (STREAM, "\t.word\t0x00600008\t\t# jr $3\n"); \
2478 fprintf (STREAM, "\t.word\t0x0020f821\t\t# move $31,$1\n"); \
2479 if (ptr_mode == DImode) \
2481 fprintf (STREAM, "\t.dword\t0x00000000\t\t# <function address>\n"); \
2482 fprintf (STREAM, "\t.dword\t0x00000000\t\t# <static chain value>\n"); \
2486 fprintf (STREAM, "\t.word\t0x00000000\t\t# <function address>\n"); \
2487 fprintf (STREAM, "\t.word\t0x00000000\t\t# <static chain value>\n"); \
2491 /* A C expression for the size in bytes of the trampoline, as an
2494 #define TRAMPOLINE_SIZE (32 + GET_MODE_SIZE (ptr_mode) * 2)
2496 /* Alignment required for trampolines, in bits. */
2498 #define TRAMPOLINE_ALIGNMENT GET_MODE_BITSIZE (ptr_mode)
2500 /* INITIALIZE_TRAMPOLINE calls this library function to flush
2501 program and data caches. */
2503 #ifndef CACHE_FLUSH_FUNC
2504 #define CACHE_FLUSH_FUNC "_flush_cache"
2507 /* A C statement to initialize the variable parts of a trampoline.
2508 ADDR is an RTX for the address of the trampoline; FNADDR is an
2509 RTX for the address of the nested function; STATIC_CHAIN is an
2510 RTX for the static chain value that should be passed to the
2511 function when it is called. */
2513 #define INITIALIZE_TRAMPOLINE(ADDR, FUNC, CHAIN) \
2515 rtx func_addr, chain_addr; \
2517 func_addr = plus_constant (ADDR, 32); \
2518 chain_addr = plus_constant (func_addr, GET_MODE_SIZE (ptr_mode)); \
2519 emit_move_insn (gen_rtx_MEM (ptr_mode, func_addr), \
2520 gen_lowpart (ptr_mode, force_reg (Pmode, FUNC))); \
2521 emit_move_insn (gen_rtx_MEM (ptr_mode, chain_addr), \
2522 gen_lowpart (ptr_mode, force_reg (Pmode, CHAIN))); \
2524 /* Flush both caches. We need to flush the data cache in case \
2525 the system has a write-back cache. */ \
2526 /* ??? Should check the return value for errors. */ \
2527 if (mips_cache_flush_func && mips_cache_flush_func[0]) \
2528 emit_library_call (gen_rtx_SYMBOL_REF (Pmode, mips_cache_flush_func), \
2529 0, VOIDmode, 3, ADDR, Pmode, \
2530 GEN_INT (TRAMPOLINE_SIZE), TYPE_MODE (integer_type_node),\
2531 GEN_INT (3), TYPE_MODE (integer_type_node)); \
2534 /* Addressing modes, and classification of registers for them. */
2536 /* These assume that REGNO is a hard or pseudo reg number.
2537 They give nonzero only if REGNO is a hard reg of the suitable class
2538 or a pseudo reg currently allocated to a suitable hard reg.
2539 These definitions are NOT overridden anywhere. */
2541 #define BASE_REG_P(regno, mode) \
2543 ? (M16_REG_P (regno) \
2544 || (regno) == FRAME_POINTER_REGNUM \
2545 || (regno) == ARG_POINTER_REGNUM \
2546 || ((regno) == STACK_POINTER_REGNUM \
2547 && (GET_MODE_SIZE (mode) == 4 \
2548 || GET_MODE_SIZE (mode) == 8))) \
2551 #define GP_REG_OR_PSEUDO_STRICT_P(regno, mode) \
2552 BASE_REG_P((regno < FIRST_PSEUDO_REGISTER) ? (int) regno : reg_renumber[regno], \
2555 #define GP_REG_OR_PSEUDO_NONSTRICT_P(regno, mode) \
2556 (((regno) >= FIRST_PSEUDO_REGISTER) || (BASE_REG_P ((regno), (mode))))
2558 #define REGNO_OK_FOR_INDEX_P(regno) 0
2559 #define REGNO_MODE_OK_FOR_BASE_P(regno, mode) \
2560 GP_REG_OR_PSEUDO_STRICT_P ((regno), (mode))
2562 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
2563 and check its validity for a certain class.
2564 We have two alternate definitions for each of them.
2565 The usual definition accepts all pseudo regs; the other rejects them all.
2566 The symbol REG_OK_STRICT causes the latter definition to be used.
2568 Most source files want to accept pseudo regs in the hope that
2569 they will get allocated to the class that the insn wants them to be in.
2570 Some source files that are used after register allocation
2571 need to be strict. */
2573 #ifndef REG_OK_STRICT
2574 #define REG_MODE_OK_FOR_BASE_P(X, MODE) \
2575 mips_reg_mode_ok_for_base_p (X, MODE, 0)
2577 #define REG_MODE_OK_FOR_BASE_P(X, MODE) \
2578 mips_reg_mode_ok_for_base_p (X, MODE, 1)
2581 #define REG_OK_FOR_INDEX_P(X) 0
2584 /* Maximum number of registers that can appear in a valid memory address. */
2586 #define MAX_REGS_PER_ADDRESS 1
2588 /* A C compound statement with a conditional `goto LABEL;' executed
2589 if X (an RTX) is a legitimate memory address on the target
2590 machine for a memory operand of mode MODE. */
2593 #define GO_PRINTF(x) fprintf(stderr, (x))
2594 #define GO_PRINTF2(x,y) fprintf(stderr, (x), (y))
2595 #define GO_DEBUG_RTX(x) debug_rtx(x)
2598 #define GO_PRINTF(x)
2599 #define GO_PRINTF2(x,y)
2600 #define GO_DEBUG_RTX(x)
2603 #ifdef REG_OK_STRICT
2604 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
2606 if (mips_legitimate_address_p (MODE, X, 1)) \
2610 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
2612 if (mips_legitimate_address_p (MODE, X, 0)) \
2617 /* Check for constness inline but use mips_legitimate_address_p
2618 to check whether a constant really is an address. */
2620 #define CONSTANT_ADDRESS_P(X) \
2621 (CONSTANT_P (X) && mips_legitimate_address_p (SImode, X, 0))
2623 #define LEGITIMATE_CONSTANT_P(X) (mips_const_insns (X) > 0)
2625 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
2627 if (mips_legitimize_address (&(X), MODE)) \
2632 /* A C statement or compound statement with a conditional `goto
2633 LABEL;' executed if memory address X (an RTX) can have different
2634 meanings depending on the machine mode of the memory reference it
2637 Autoincrement and autodecrement addresses typically have
2638 mode-dependent effects because the amount of the increment or
2639 decrement is the size of the operand being addressed. Some
2640 machines have other mode-dependent addresses. Many RISC machines
2641 have no mode-dependent addresses.
2643 You may assume that ADDR is a valid address for the machine. */
2645 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) {}
2647 /* This handles the magic '..CURRENT_FUNCTION' symbol, which means
2648 'the start of the function that this code is output in'. */
2650 #define ASM_OUTPUT_LABELREF(FILE,NAME) \
2651 if (strcmp (NAME, "..CURRENT_FUNCTION") == 0) \
2652 asm_fprintf ((FILE), "%U%s", \
2653 XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0)); \
2655 asm_fprintf ((FILE), "%U%s", (NAME))
2657 /* The mips16 wants the constant pool to be after the function,
2658 because the PC relative load instructions use unsigned offsets. */
2660 #define CONSTANT_POOL_BEFORE_FUNCTION (! TARGET_MIPS16)
2662 #define ASM_OUTPUT_POOL_EPILOGUE(FILE, FNNAME, FNDECL, SIZE) \
2663 mips_string_length = 0;
2665 /* Specify the machine mode that this machine uses
2666 for the index in the tablejump instruction.
2667 ??? Using HImode in mips16 mode can cause overflow. */
2668 #define CASE_VECTOR_MODE \
2669 (TARGET_MIPS16 ? HImode : ptr_mode)
2671 /* Define as C expression which evaluates to nonzero if the tablejump
2672 instruction expects the table to contain offsets from the address of the
2674 Do not define this if the table should contain absolute addresses. */
2675 #define CASE_VECTOR_PC_RELATIVE (TARGET_MIPS16)
2677 /* Define this as 1 if `char' should by default be signed; else as 0. */
2678 #ifndef DEFAULT_SIGNED_CHAR
2679 #define DEFAULT_SIGNED_CHAR 1
2682 /* Max number of bytes we can move from memory to memory
2683 in one reasonably fast instruction. */
2684 #define MOVE_MAX (TARGET_64BIT ? 8 : 4)
2685 #define MAX_MOVE_MAX 8
2687 /* Define this macro as a C expression which is nonzero if
2688 accessing less than a word of memory (i.e. a `char' or a
2689 `short') is no faster than accessing a word of memory, i.e., if
2690 such access require more than one instruction or if there is no
2691 difference in cost between byte and (aligned) word loads.
2693 On RISC machines, it tends to generate better code to define
2694 this as 1, since it avoids making a QI or HI mode register. */
2695 #define SLOW_BYTE_ACCESS 1
2697 /* Define this to be nonzero if shift instructions ignore all but the low-order
2699 #define SHIFT_COUNT_TRUNCATED 1
2701 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
2702 is done just by pretending it is already truncated. */
2703 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) \
2704 (TARGET_64BIT ? ((INPREC) <= 32 || (OUTPREC) > 32) : 1)
2707 /* Specify the machine mode that pointers have.
2708 After generation of rtl, the compiler makes no further distinction
2709 between pointers and any other objects of this machine mode. */
2712 #define Pmode (TARGET_64BIT && TARGET_LONG64 ? DImode : SImode)
2715 /* Give call MEMs SImode since it is the "most permissive" mode
2716 for both 32-bit and 64-bit targets. */
2718 #define FUNCTION_MODE SImode
2721 /* The cost of loading values from the constant pool. It should be
2722 larger than the cost of any constant we want to synthesize in-line. */
2724 #define CONSTANT_POOL_COST COSTS_N_INSNS (8)
2726 /* A C expression for the cost of moving data from a register in
2727 class FROM to one in class TO. The classes are expressed using
2728 the enumeration values such as `GENERAL_REGS'. A value of 2 is
2729 the default; other values are interpreted relative to that.
2731 It is not required that the cost always equal 2 when FROM is the
2732 same as TO; on some machines it is expensive to move between
2733 registers if they are not general registers.
2735 If reload sees an insn consisting of a single `set' between two
2736 hard registers, and if `REGISTER_MOVE_COST' applied to their
2737 classes returns a value of 2, reload does not check to ensure
2738 that the constraints of the insn are met. Setting a cost of
2739 other than 2 will allow reload to verify that the constraints are
2740 met. You should do this if the `movM' pattern's constraints do
2741 not allow such copying. */
2743 #define REGISTER_MOVE_COST(MODE, FROM, TO) \
2744 mips_register_move_cost (MODE, FROM, TO)
2746 /* ??? Fix this to be right for the R8000. */
2747 #define MEMORY_MOVE_COST(MODE,CLASS,TO_P) \
2748 (((TUNE_MIPS4000 || TUNE_MIPS6000) ? 6 : 4) \
2749 + memory_move_secondary_cost ((MODE), (CLASS), (TO_P)))
2751 /* Define if copies to/from condition code registers should be avoided.
2753 This is needed for the MIPS because reload_outcc is not complete;
2754 it needs to handle cases where the source is a general or another
2755 condition code register. */
2756 #define AVOID_CCMODE_COPIES
2758 /* A C expression for the cost of a branch instruction. A value of
2759 1 is the default; other values are interpreted relative to that. */
2761 /* ??? Fix this to be right for the R8000. */
2762 #define BRANCH_COST \
2764 && (TUNE_MIPS4000 || TUNE_MIPS6000)) \
2767 /* If defined, modifies the length assigned to instruction INSN as a
2768 function of the context in which it is used. LENGTH is an lvalue
2769 that contains the initially computed length of the insn and should
2770 be updated with the correct length of the insn. */
2771 #define ADJUST_INSN_LENGTH(INSN, LENGTH) \
2772 ((LENGTH) = mips_adjust_insn_length ((INSN), (LENGTH)))
2775 /* Optionally define this if you have added predicates to
2776 `MACHINE.c'. This macro is called within an initializer of an
2777 array of structures. The first field in the structure is the
2778 name of a predicate and the second field is an array of rtl
2779 codes. For each predicate, list all rtl codes that can be in
2780 expressions matched by the predicate. The list should have a
2781 trailing comma. Here is an example of two entries in the list
2782 for a typical RISC machine:
2784 #define PREDICATE_CODES \
2785 {"gen_reg_rtx_operand", {SUBREG, REG}}, \
2786 {"reg_or_short_cint_operand", {SUBREG, REG, CONST_INT}},
2788 Defining this macro does not affect the generated code (however,
2789 incorrect definitions that omit an rtl code that may be matched
2790 by the predicate can cause the compiler to malfunction).
2791 Instead, it allows the table built by `genrecog' to be more
2792 compact and efficient, thus speeding up the compiler. The most
2793 important predicates to include in the list specified by this
2794 macro are thoses used in the most insn patterns. */
2796 #define PREDICATE_CODES \
2797 {"uns_arith_operand", { REG, CONST_INT, SUBREG, ADDRESSOF }}, \
2798 {"symbolic_operand", { CONST, SYMBOL_REF, LABEL_REF }}, \
2799 {"const_arith_operand", { CONST, CONST_INT }}, \
2800 {"arith_operand", { REG, CONST_INT, CONST, SUBREG, ADDRESSOF }}, \
2801 {"reg_or_0_operand", { REG, CONST_INT, CONST_DOUBLE, SUBREG, ADDRESSOF }}, \
2802 {"small_int", { CONST_INT }}, \
2803 {"mips_const_double_ok", { CONST_DOUBLE }}, \
2804 {"const_float_1_operand", { CONST_DOUBLE }}, \
2805 {"reg_or_const_float_1_operand", { CONST_DOUBLE, REG}}, \
2806 {"simple_memory_operand", { MEM, SUBREG }}, \
2807 {"equality_op", { EQ, NE }}, \
2808 {"cmp_op", { EQ, NE, GT, GE, GTU, GEU, LT, LE, \
2810 {"trap_cmp_op", { EQ, NE, GE, GEU, LT, LTU }}, \
2811 {"pc_or_label_operand", { PC, LABEL_REF }}, \
2812 {"call_insn_operand", { CONST, SYMBOL_REF, LABEL_REF, REG }}, \
2813 {"move_operand", { CONST_INT, CONST_DOUBLE, CONST, \
2814 SYMBOL_REF, LABEL_REF, SUBREG, \
2816 {"stack_operand", { MEM }}, \
2817 {"consttable_operand", { LABEL_REF, SYMBOL_REF, CONST_INT, \
2818 CONST_DOUBLE, CONST }}, \
2819 {"fcc_register_operand", { REG, SUBREG }}, \
2820 {"hilo_operand", { REG }}, \
2821 {"extend_operator", { ZERO_EXTEND, SIGN_EXTEND }},
2823 /* A list of predicates that do special things with modes, and so
2824 should not elicit warnings for VOIDmode match_operand. */
2826 #define SPECIAL_MODE_PREDICATES \
2827 "pc_or_label_operand",
2829 /* Control the assembler format that we output. */
2831 /* Output to assembler file text saying following lines
2832 may contain character constants, extra white space, comments, etc. */
2835 #define ASM_APP_ON " #APP\n"
2838 /* Output to assembler file text saying following lines
2839 no longer contain unusual constructs. */
2842 #define ASM_APP_OFF " #NO_APP\n"
2845 /* How to refer to registers in assembler output.
2846 This sequence is indexed by compiler's hard-register-number (see above).
2848 In order to support the two different conventions for register names,
2849 we use the name of a table set up in mips.c, which is overwritten
2850 if -mrnames is used. */
2852 #define REGISTER_NAMES \
2854 &mips_reg_names[ 0][0], \
2855 &mips_reg_names[ 1][0], \
2856 &mips_reg_names[ 2][0], \
2857 &mips_reg_names[ 3][0], \
2858 &mips_reg_names[ 4][0], \
2859 &mips_reg_names[ 5][0], \
2860 &mips_reg_names[ 6][0], \
2861 &mips_reg_names[ 7][0], \
2862 &mips_reg_names[ 8][0], \
2863 &mips_reg_names[ 9][0], \
2864 &mips_reg_names[10][0], \
2865 &mips_reg_names[11][0], \
2866 &mips_reg_names[12][0], \
2867 &mips_reg_names[13][0], \
2868 &mips_reg_names[14][0], \
2869 &mips_reg_names[15][0], \
2870 &mips_reg_names[16][0], \
2871 &mips_reg_names[17][0], \
2872 &mips_reg_names[18][0], \
2873 &mips_reg_names[19][0], \
2874 &mips_reg_names[20][0], \
2875 &mips_reg_names[21][0], \
2876 &mips_reg_names[22][0], \
2877 &mips_reg_names[23][0], \
2878 &mips_reg_names[24][0], \
2879 &mips_reg_names[25][0], \
2880 &mips_reg_names[26][0], \
2881 &mips_reg_names[27][0], \
2882 &mips_reg_names[28][0], \
2883 &mips_reg_names[29][0], \
2884 &mips_reg_names[30][0], \
2885 &mips_reg_names[31][0], \
2886 &mips_reg_names[32][0], \
2887 &mips_reg_names[33][0], \
2888 &mips_reg_names[34][0], \
2889 &mips_reg_names[35][0], \
2890 &mips_reg_names[36][0], \
2891 &mips_reg_names[37][0], \
2892 &mips_reg_names[38][0], \
2893 &mips_reg_names[39][0], \
2894 &mips_reg_names[40][0], \
2895 &mips_reg_names[41][0], \
2896 &mips_reg_names[42][0], \
2897 &mips_reg_names[43][0], \
2898 &mips_reg_names[44][0], \
2899 &mips_reg_names[45][0], \
2900 &mips_reg_names[46][0], \
2901 &mips_reg_names[47][0], \
2902 &mips_reg_names[48][0], \
2903 &mips_reg_names[49][0], \
2904 &mips_reg_names[50][0], \
2905 &mips_reg_names[51][0], \
2906 &mips_reg_names[52][0], \
2907 &mips_reg_names[53][0], \
2908 &mips_reg_names[54][0], \
2909 &mips_reg_names[55][0], \
2910 &mips_reg_names[56][0], \
2911 &mips_reg_names[57][0], \
2912 &mips_reg_names[58][0], \
2913 &mips_reg_names[59][0], \
2914 &mips_reg_names[60][0], \
2915 &mips_reg_names[61][0], \
2916 &mips_reg_names[62][0], \
2917 &mips_reg_names[63][0], \
2918 &mips_reg_names[64][0], \
2919 &mips_reg_names[65][0], \
2920 &mips_reg_names[66][0], \
2921 &mips_reg_names[67][0], \
2922 &mips_reg_names[68][0], \
2923 &mips_reg_names[69][0], \
2924 &mips_reg_names[70][0], \
2925 &mips_reg_names[71][0], \
2926 &mips_reg_names[72][0], \
2927 &mips_reg_names[73][0], \
2928 &mips_reg_names[74][0], \
2929 &mips_reg_names[75][0], \
2930 &mips_reg_names[76][0], \
2931 &mips_reg_names[77][0], \
2932 &mips_reg_names[78][0], \
2933 &mips_reg_names[79][0], \
2934 &mips_reg_names[80][0], \
2935 &mips_reg_names[81][0], \
2936 &mips_reg_names[82][0], \
2937 &mips_reg_names[83][0], \
2938 &mips_reg_names[84][0], \
2939 &mips_reg_names[85][0], \
2940 &mips_reg_names[86][0], \
2941 &mips_reg_names[87][0], \
2942 &mips_reg_names[88][0], \
2943 &mips_reg_names[89][0], \
2944 &mips_reg_names[90][0], \
2945 &mips_reg_names[91][0], \
2946 &mips_reg_names[92][0], \
2947 &mips_reg_names[93][0], \
2948 &mips_reg_names[94][0], \
2949 &mips_reg_names[95][0], \
2950 &mips_reg_names[96][0], \
2951 &mips_reg_names[97][0], \
2952 &mips_reg_names[98][0], \
2953 &mips_reg_names[99][0], \
2954 &mips_reg_names[100][0], \
2955 &mips_reg_names[101][0], \
2956 &mips_reg_names[102][0], \
2957 &mips_reg_names[103][0], \
2958 &mips_reg_names[104][0], \
2959 &mips_reg_names[105][0], \
2960 &mips_reg_names[106][0], \
2961 &mips_reg_names[107][0], \
2962 &mips_reg_names[108][0], \
2963 &mips_reg_names[109][0], \
2964 &mips_reg_names[110][0], \
2965 &mips_reg_names[111][0], \
2966 &mips_reg_names[112][0], \
2967 &mips_reg_names[113][0], \
2968 &mips_reg_names[114][0], \
2969 &mips_reg_names[115][0], \
2970 &mips_reg_names[116][0], \
2971 &mips_reg_names[117][0], \
2972 &mips_reg_names[118][0], \
2973 &mips_reg_names[119][0], \
2974 &mips_reg_names[120][0], \
2975 &mips_reg_names[121][0], \
2976 &mips_reg_names[122][0], \
2977 &mips_reg_names[123][0], \
2978 &mips_reg_names[124][0], \
2979 &mips_reg_names[125][0], \
2980 &mips_reg_names[126][0], \
2981 &mips_reg_names[127][0], \
2982 &mips_reg_names[128][0], \
2983 &mips_reg_names[129][0], \
2984 &mips_reg_names[130][0], \
2985 &mips_reg_names[131][0], \
2986 &mips_reg_names[132][0], \
2987 &mips_reg_names[133][0], \
2988 &mips_reg_names[134][0], \
2989 &mips_reg_names[135][0], \
2990 &mips_reg_names[136][0], \
2991 &mips_reg_names[137][0], \
2992 &mips_reg_names[138][0], \
2993 &mips_reg_names[139][0], \
2994 &mips_reg_names[140][0], \
2995 &mips_reg_names[141][0], \
2996 &mips_reg_names[142][0], \
2997 &mips_reg_names[143][0], \
2998 &mips_reg_names[144][0], \
2999 &mips_reg_names[145][0], \
3000 &mips_reg_names[146][0], \
3001 &mips_reg_names[147][0], \
3002 &mips_reg_names[148][0], \
3003 &mips_reg_names[149][0], \
3004 &mips_reg_names[150][0], \
3005 &mips_reg_names[151][0], \
3006 &mips_reg_names[152][0], \
3007 &mips_reg_names[153][0], \
3008 &mips_reg_names[154][0], \
3009 &mips_reg_names[155][0], \
3010 &mips_reg_names[156][0], \
3011 &mips_reg_names[157][0], \
3012 &mips_reg_names[158][0], \
3013 &mips_reg_names[159][0], \
3014 &mips_reg_names[160][0], \
3015 &mips_reg_names[161][0], \
3016 &mips_reg_names[162][0], \
3017 &mips_reg_names[163][0], \
3018 &mips_reg_names[164][0], \
3019 &mips_reg_names[165][0], \
3020 &mips_reg_names[166][0], \
3021 &mips_reg_names[167][0], \
3022 &mips_reg_names[168][0], \
3023 &mips_reg_names[169][0], \
3024 &mips_reg_names[170][0], \
3025 &mips_reg_names[171][0], \
3026 &mips_reg_names[172][0], \
3027 &mips_reg_names[173][0], \
3028 &mips_reg_names[174][0], \
3029 &mips_reg_names[175][0] \
3032 /* print-rtl.c can't use REGISTER_NAMES, since it depends on mips.c.
3033 So define this for it. */
3034 #define DEBUG_REGISTER_NAMES \
3036 "$0", "at", "v0", "v1", "a0", "a1", "a2", "a3", \
3037 "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \
3038 "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \
3039 "t8", "t9", "k0", "k1", "gp", "sp", "$fp", "ra", \
3040 "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", \
3041 "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", \
3042 "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", \
3043 "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31", \
3044 "hi", "lo", "", "$fcc0","$fcc1","$fcc2","$fcc3","$fcc4", \
3045 "$fcc5","$fcc6","$fcc7","$rap", "", "", "", "", \
3046 "$c0r0", "$c0r1", "$c0r2", "$c0r3", "$c0r4", "$c0r5", "$c0r6", "$c0r7",\
3047 "$c0r8", "$c0r9", "$c0r10","$c0r11","$c0r12","$c0r13","$c0r14","$c0r15",\
3048 "$c0r16","$c0r17","$c0r18","$c0r19","$c0r20","$c0r21","$c0r22","$c0r23",\
3049 "$c0r24","$c0r25","$c0r26","$c0r27","$c0r28","$c0r29","$c0r30","$c0r31",\
3050 "$c2r0", "$c2r1", "$c2r2", "$c2r3", "$c2r4", "$c2r5", "$c2r6", "$c2r7",\
3051 "$c2r8", "$c2r9", "$c2r10","$c2r11","$c2r12","$c2r13","$c2r14","$c2r15",\
3052 "$c2r16","$c2r17","$c2r18","$c2r19","$c2r20","$c2r21","$c2r22","$c2r23",\
3053 "$c2r24","$c2r25","$c2r26","$c2r27","$c2r28","$c2r29","$c2r30","$c2r31",\
3054 "$c3r0", "$c3r1", "$c3r2", "$c3r3", "$c3r4", "$c3r5", "$c3r6", "$c3r7",\
3055 "$c3r8", "$c3r9", "$c3r10","$c3r11","$c3r12","$c3r13","$c3r14","$c3r15",\
3056 "$c3r16","$c3r17","$c3r18","$c3r19","$c3r20","$c3r21","$c3r22","$c3r23",\
3057 "$c3r24","$c3r25","$c3r26","$c3r27","$c3r28","$c3r29","$c3r30","$c3r31"\
3060 /* If defined, a C initializer for an array of structures
3061 containing a name and a register number. This macro defines
3062 additional names for hard registers, thus allowing the `asm'
3063 option in declarations to refer to registers using alternate
3066 We define both names for the integer registers here. */
3068 #define ADDITIONAL_REGISTER_NAMES \
3070 { "$0", 0 + GP_REG_FIRST }, \
3071 { "$1", 1 + GP_REG_FIRST }, \
3072 { "$2", 2 + GP_REG_FIRST }, \
3073 { "$3", 3 + GP_REG_FIRST }, \
3074 { "$4", 4 + GP_REG_FIRST }, \
3075 { "$5", 5 + GP_REG_FIRST }, \
3076 { "$6", 6 + GP_REG_FIRST }, \
3077 { "$7", 7 + GP_REG_FIRST }, \
3078 { "$8", 8 + GP_REG_FIRST }, \
3079 { "$9", 9 + GP_REG_FIRST }, \
3080 { "$10", 10 + GP_REG_FIRST }, \
3081 { "$11", 11 + GP_REG_FIRST }, \
3082 { "$12", 12 + GP_REG_FIRST }, \
3083 { "$13", 13 + GP_REG_FIRST }, \
3084 { "$14", 14 + GP_REG_FIRST }, \
3085 { "$15", 15 + GP_REG_FIRST }, \
3086 { "$16", 16 + GP_REG_FIRST }, \
3087 { "$17", 17 + GP_REG_FIRST }, \
3088 { "$18", 18 + GP_REG_FIRST }, \
3089 { "$19", 19 + GP_REG_FIRST }, \
3090 { "$20", 20 + GP_REG_FIRST }, \
3091 { "$21", 21 + GP_REG_FIRST }, \
3092 { "$22", 22 + GP_REG_FIRST }, \
3093 { "$23", 23 + GP_REG_FIRST }, \
3094 { "$24", 24 + GP_REG_FIRST }, \
3095 { "$25", 25 + GP_REG_FIRST }, \
3096 { "$26", 26 + GP_REG_FIRST }, \
3097 { "$27", 27 + GP_REG_FIRST }, \
3098 { "$28", 28 + GP_REG_FIRST }, \
3099 { "$29", 29 + GP_REG_FIRST }, \
3100 { "$30", 30 + GP_REG_FIRST }, \
3101 { "$31", 31 + GP_REG_FIRST }, \
3102 { "$sp", 29 + GP_REG_FIRST }, \
3103 { "$fp", 30 + GP_REG_FIRST }, \
3104 { "at", 1 + GP_REG_FIRST }, \
3105 { "v0", 2 + GP_REG_FIRST }, \
3106 { "v1", 3 + GP_REG_FIRST }, \
3107 { "a0", 4 + GP_REG_FIRST }, \
3108 { "a1", 5 + GP_REG_FIRST }, \
3109 { "a2", 6 + GP_REG_FIRST }, \
3110 { "a3", 7 + GP_REG_FIRST }, \
3111 { "t0", 8 + GP_REG_FIRST }, \
3112 { "t1", 9 + GP_REG_FIRST }, \
3113 { "t2", 10 + GP_REG_FIRST }, \
3114 { "t3", 11 + GP_REG_FIRST }, \
3115 { "t4", 12 + GP_REG_FIRST }, \
3116 { "t5", 13 + GP_REG_FIRST }, \
3117 { "t6", 14 + GP_REG_FIRST }, \
3118 { "t7", 15 + GP_REG_FIRST }, \
3119 { "s0", 16 + GP_REG_FIRST }, \
3120 { "s1", 17 + GP_REG_FIRST }, \
3121 { "s2", 18 + GP_REG_FIRST }, \
3122 { "s3", 19 + GP_REG_FIRST }, \
3123 { "s4", 20 + GP_REG_FIRST }, \
3124 { "s5", 21 + GP_REG_FIRST }, \
3125 { "s6", 22 + GP_REG_FIRST }, \
3126 { "s7", 23 + GP_REG_FIRST }, \
3127 { "t8", 24 + GP_REG_FIRST }, \
3128 { "t9", 25 + GP_REG_FIRST }, \
3129 { "k0", 26 + GP_REG_FIRST }, \
3130 { "k1", 27 + GP_REG_FIRST }, \
3131 { "gp", 28 + GP_REG_FIRST }, \
3132 { "sp", 29 + GP_REG_FIRST }, \
3133 { "fp", 30 + GP_REG_FIRST }, \
3134 { "ra", 31 + GP_REG_FIRST }, \
3135 { "$sp", 29 + GP_REG_FIRST }, \
3136 { "$fp", 30 + GP_REG_FIRST } \
3137 ALL_COP_ADDITIONAL_REGISTER_NAMES \
3140 /* This is meant to be redefined in the host dependent files. It is a
3141 set of alternative names and regnums for mips coprocessors. */
3143 #define ALL_COP_ADDITIONAL_REGISTER_NAMES
3145 /* A C compound statement to output to stdio stream STREAM the
3146 assembler syntax for an instruction operand X. X is an RTL
3149 CODE is a value that can be used to specify one of several ways
3150 of printing the operand. It is used when identical operands
3151 must be printed differently depending on the context. CODE
3152 comes from the `%' specification that was used to request
3153 printing of the operand. If the specification was just `%DIGIT'
3154 then CODE is 0; if the specification was `%LTR DIGIT' then CODE
3155 is the ASCII code for LTR.
3157 If X is a register, this macro should print the register's name.
3158 The names can be found in an array `reg_names' whose type is
3159 `char *[]'. `reg_names' is initialized from `REGISTER_NAMES'.
3161 When the machine description has a specification `%PUNCT' (a `%'
3162 followed by a punctuation character), this macro is called with
3163 a null pointer for X and the punctuation character for CODE.
3165 See mips.c for the MIPS specific codes. */
3167 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
3169 /* A C expression which evaluates to true if CODE is a valid
3170 punctuation character for use in the `PRINT_OPERAND' macro. If
3171 `PRINT_OPERAND_PUNCT_VALID_P' is not defined, it means that no
3172 punctuation characters (except for the standard one, `%') are
3173 used in this way. */
3175 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) mips_print_operand_punct[CODE]
3177 /* A C compound statement to output to stdio stream STREAM the
3178 assembler syntax for an instruction operand that is a memory
3179 reference whose address is ADDR. ADDR is an RTL expression. */
3181 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)
3184 /* A C statement, to be executed after all slot-filler instructions
3185 have been output. If necessary, call `dbr_sequence_length' to
3186 determine the number of slots filled in a sequence (zero if not
3187 currently outputting a sequence), to decide how many no-ops to
3188 output, or whatever.
3190 Don't define this macro if it has nothing to do, but it is
3191 helpful in reading assembly output if the extent of the delay
3192 sequence is made explicit (e.g. with white space).
3194 Note that output routines for instructions with delay slots must
3195 be prepared to deal with not being output as part of a sequence
3196 (i.e. when the scheduling pass is not run, or when no slot
3197 fillers could be found.) The variable `final_sequence' is null
3198 when not processing a sequence, otherwise it contains the
3199 `sequence' rtx being output. */
3201 #define DBR_OUTPUT_SEQEND(STREAM) \
3204 if (set_nomacro > 0 && --set_nomacro == 0) \
3205 fputs ("\t.set\tmacro\n", STREAM); \
3207 if (set_noreorder > 0 && --set_noreorder == 0) \
3208 fputs ("\t.set\treorder\n", STREAM); \
3210 fputs ("\n", STREAM); \
3215 /* How to tell the debugger about changes of source files. */
3217 #ifndef SET_FILE_NUMBER
3218 #define SET_FILE_NUMBER() ++num_source_filenames
3221 #define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \
3222 mips_output_filename (STREAM, NAME)
3224 /* This is defined so that it can be overridden in iris6.h. */
3225 #define ASM_OUTPUT_FILENAME(STREAM, NUM_SOURCE_FILENAMES, NAME) \
3228 fprintf (STREAM, "\t.file\t%d ", NUM_SOURCE_FILENAMES); \
3229 output_quoted_string (STREAM, NAME); \
3230 fputs ("\n", STREAM); \
3234 /* This is how to output a note the debugger telling it the line number
3235 to which the following sequence of instructions corresponds.
3236 Silicon graphics puts a label after each .loc. */
3238 #ifndef LABEL_AFTER_LOC
3239 #define LABEL_AFTER_LOC(STREAM)
3242 #ifndef ASM_OUTPUT_SOURCE_LINE
3243 #define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE, COUNTER) \
3244 mips_output_lineno (STREAM, LINE)
3247 /* The MIPS implementation uses some labels for its own purpose. The
3248 following lists what labels are created, and are all formed by the
3249 pattern $L[a-z].*. The machine independent portion of GCC creates
3250 labels matching: $L[A-Z][0-9]+ and $L[0-9]+.
3252 LM[0-9]+ Silicon Graphics/ECOFF stabs label before each stmt.
3253 $Lb[0-9]+ Begin blocks for MIPS debug support
3254 $Lc[0-9]+ Label for use in s<xx> operation.
3255 $Le[0-9]+ End blocks for MIPS debug support */
3257 #undef ASM_DECLARE_OBJECT_NAME
3258 #define ASM_DECLARE_OBJECT_NAME(STREAM, NAME, DECL) \
3259 mips_declare_object (STREAM, NAME, "", ":\n", 0)
3261 /* Globalizing directive for a label. */
3262 #define GLOBAL_ASM_OP "\t.globl\t"
3264 /* This says how to define a global common symbol. */
3266 #define ASM_OUTPUT_ALIGNED_DECL_COMMON(STREAM, DECL, NAME, SIZE, ALIGN) \
3268 /* If the target wants uninitialized const declarations in \
3269 .rdata then don't put them in .comm */ \
3270 if (TARGET_EMBEDDED_DATA && TARGET_UNINIT_CONST_IN_RODATA \
3271 && TREE_CODE (DECL) == VAR_DECL && TREE_READONLY (DECL) \
3272 && (DECL_INITIAL (DECL) == 0 \
3273 || DECL_INITIAL (DECL) == error_mark_node)) \
3275 if (TREE_PUBLIC (DECL) && DECL_NAME (DECL)) \
3276 (*targetm.asm_out.globalize_label) (STREAM, NAME); \
3278 readonly_data_section (); \
3279 ASM_OUTPUT_ALIGN (STREAM, floor_log2 (ALIGN / BITS_PER_UNIT)); \
3280 mips_declare_object (STREAM, NAME, "", ":\n\t.space\t%u\n", \
3284 mips_declare_object (STREAM, NAME, "\n\t.comm\t", ",%u\n", \
3289 /* This says how to define a local common symbol (ie, not visible to
3292 #define ASM_OUTPUT_LOCAL(STREAM, NAME, SIZE, ROUNDED) \
3293 mips_declare_object (STREAM, NAME, "\n\t.lcomm\t", ",%u\n", (int)(SIZE))
3296 /* This says how to output an external. It would be possible not to
3297 output anything and let undefined symbol become external. However
3298 the assembler uses length information on externals to allocate in
3299 data/sdata bss/sbss, thereby saving exec time. */
3301 #define ASM_OUTPUT_EXTERNAL(STREAM,DECL,NAME) \
3302 mips_output_external(STREAM,DECL,NAME)
3305 /* This is how to declare a function name. The actual work of
3306 emitting the label is moved to function_prologue, so that we can
3307 get the line number correctly emitted before the .ent directive,
3308 and after any .file directives. Define as empty so that the function
3309 is not declared before the .ent directive elsewhere. */
3311 #undef ASM_DECLARE_FUNCTION_NAME
3312 #define ASM_DECLARE_FUNCTION_NAME(STREAM,NAME,DECL)
3314 /* This is how to store into the string LABEL
3315 the symbol_ref name of an internal numbered label where
3316 PREFIX is the class of label and NUM is the number within the class.
3317 This is suitable for output with `assemble_name'. */
3319 #undef ASM_GENERATE_INTERNAL_LABEL
3320 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
3321 sprintf ((LABEL), "*%s%s%ld", (LOCAL_LABEL_PREFIX), (PREFIX), (long)(NUM))
3323 /* This is how to output an element of a case-vector that is absolute. */
3325 #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
3326 fprintf (STREAM, "\t%s\t%sL%d\n", \
3327 ptr_mode == DImode ? ".dword" : ".word", \
3328 LOCAL_LABEL_PREFIX, \
3331 /* This is how to output an element of a case-vector that is relative.
3332 This is used for pc-relative code (e.g. when TARGET_ABICALLS or
3333 TARGET_EMBEDDED_PIC). */
3335 #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
3337 if (TARGET_MIPS16) \
3338 fprintf (STREAM, "\t.half\t%sL%d-%sL%d\n", \
3339 LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
3340 else if (TARGET_EMBEDDED_PIC) \
3341 fprintf (STREAM, "\t%s\t%sL%d-%sLS%d\n", \
3342 ptr_mode == DImode ? ".dword" : ".word", \
3343 LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
3344 else if (TARGET_GPWORD) \
3345 fprintf (STREAM, "\t%s\t%sL%d\n", \
3346 ptr_mode == DImode ? ".gpdword" : ".gpword", \
3347 LOCAL_LABEL_PREFIX, VALUE); \
3349 fprintf (STREAM, "\t%s\t%sL%d\n", \
3350 ptr_mode == DImode ? ".dword" : ".word", \
3351 LOCAL_LABEL_PREFIX, VALUE); \
3354 /* When generating embedded PIC or mips16 code we want to put the jump
3355 table in the .text section. In all other cases, we want to put the
3356 jump table in the .rdata section. Unfortunately, we can't use
3357 JUMP_TABLES_IN_TEXT_SECTION, because it is not conditional.
3358 Instead, we use ASM_OUTPUT_CASE_LABEL to switch back to the .text
3359 section if appropriate. */
3360 #undef ASM_OUTPUT_CASE_LABEL
3361 #define ASM_OUTPUT_CASE_LABEL(FILE, PREFIX, NUM, INSN) \
3363 if (TARGET_EMBEDDED_PIC || TARGET_MIPS16) \
3364 function_section (current_function_decl); \
3365 (*targetm.asm_out.internal_label) (FILE, PREFIX, NUM); \
3368 /* This is how to output an assembler line
3369 that says to advance the location counter
3370 to a multiple of 2**LOG bytes. */
3372 #define ASM_OUTPUT_ALIGN(STREAM,LOG) \
3373 fprintf (STREAM, "\t.align\t%d\n", (LOG))
3375 /* This is how to output an assembler line to advance the location
3376 counter by SIZE bytes. */
3378 #undef ASM_OUTPUT_SKIP
3379 #define ASM_OUTPUT_SKIP(STREAM,SIZE) \
3380 fprintf (STREAM, "\t.space\t"HOST_WIDE_INT_PRINT_UNSIGNED"\n", (SIZE))
3382 /* This is how to output a string. */
3383 #undef ASM_OUTPUT_ASCII
3384 #define ASM_OUTPUT_ASCII(STREAM, STRING, LEN) \
3385 mips_output_ascii (STREAM, STRING, LEN)
3387 /* Output #ident as a in the read-only data section. */
3388 #undef ASM_OUTPUT_IDENT
3389 #define ASM_OUTPUT_IDENT(FILE, STRING) \
3391 const char *p = STRING; \
3392 int size = strlen (p) + 1; \
3393 readonly_data_section (); \
3394 assemble_string (p, size); \
3397 /* Default to -G 8 */
3398 #ifndef MIPS_DEFAULT_GVALUE
3399 #define MIPS_DEFAULT_GVALUE 8
3402 /* Define the strings to put out for each section in the object file. */
3403 #define TEXT_SECTION_ASM_OP "\t.text" /* instructions */
3404 #define DATA_SECTION_ASM_OP "\t.data" /* large data */
3405 #define SDATA_SECTION_ASM_OP "\t.sdata" /* small data */
3407 #undef READONLY_DATA_SECTION_ASM_OP
3408 #define READONLY_DATA_SECTION_ASM_OP "\t.rdata" /* read-only data */
3410 /* Given a decl node or constant node, choose the section to output it in
3411 and select that section. */
3413 #undef TARGET_ASM_SELECT_SECTION
3414 #define TARGET_ASM_SELECT_SECTION mips_select_section
3416 #define ASM_OUTPUT_REG_PUSH(STREAM,REGNO) \
3419 fprintf (STREAM, "\t%s\t%s,%s,8\n\t%s\t%s,0(%s)\n", \
3420 TARGET_64BIT ? "dsubu" : "subu", \
3421 reg_names[STACK_POINTER_REGNUM], \
3422 reg_names[STACK_POINTER_REGNUM], \
3423 TARGET_64BIT ? "sd" : "sw", \
3425 reg_names[STACK_POINTER_REGNUM]); \
3429 #define ASM_OUTPUT_REG_POP(STREAM,REGNO) \
3432 if (! set_noreorder) \
3433 fprintf (STREAM, "\t.set\tnoreorder\n"); \
3435 fprintf (STREAM, "\t%s\t%s,0(%s)\n\t%s\t%s,%s,8\n", \
3436 TARGET_64BIT ? "ld" : "lw", \
3438 reg_names[STACK_POINTER_REGNUM], \
3439 TARGET_64BIT ? "daddu" : "addu", \
3440 reg_names[STACK_POINTER_REGNUM], \
3441 reg_names[STACK_POINTER_REGNUM]); \
3443 if (! set_noreorder) \
3444 fprintf (STREAM, "\t.set\treorder\n"); \
3448 /* How to start an assembler comment.
3449 The leading space is important (the mips native assembler requires it). */
3450 #ifndef ASM_COMMENT_START
3451 #define ASM_COMMENT_START " #"
3454 /* Default definitions for size_t and ptrdiff_t. We must override the
3455 definitions from ../svr4.h on mips-*-linux-gnu. */
3458 #define SIZE_TYPE (POINTER_SIZE == 64 ? "long unsigned int" : "unsigned int")
3461 #define PTRDIFF_TYPE (POINTER_SIZE == 64 ? "long int" : "int")
3463 /* See mips_expand_prologue's use of loadgp for when this should be
3466 #define DONT_ACCESS_GBLS_AFTER_EPILOGUE (TARGET_ABICALLS \
3467 && mips_abi != ABI_32 \
3468 && mips_abi != ABI_O64)
3471 #define DFMODE_NAN \
3472 unsigned short DFbignan[4] = {0x7ff7, 0xffff, 0xffff, 0xffff}; \
3473 unsigned short DFlittlenan[4] = {0xffff, 0xffff, 0xffff, 0xfff7}
3474 #define SFMODE_NAN \
3475 unsigned short SFbignan[2] = {0x7fbf, 0xffff}; \
3476 unsigned short SFlittlenan[2] = {0xffff, 0xffbf}
3478 /* Generate calls to memcpy, etc., not bcopy, etc. */
3479 #define TARGET_MEM_FUNCTIONS
3482 /* Since the bits of the _init and _fini function is spread across
3483 many object files, each potentially with its own GP, we must assume
3484 we need to load our GP. We don't preserve $gp or $ra, since each
3485 init/fini chunk is supposed to initialize $gp, and crti/crtn
3486 already take care of preserving $ra and, when appropriate, $gp. */
3487 #if _MIPS_SIM == _MIPS_SIM_ABI32
3488 #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
3489 asm (SECTION_OP "\n\
3495 jal " USER_LABEL_PREFIX #FUNC "\n\
3496 " TEXT_SECTION_ASM_OP);
3497 #endif /* Switch to #elif when we're no longer limited by K&R C. */
3498 #if (defined _ABIN32 && _MIPS_SIM == _ABIN32) \
3499 || (defined _ABI64 && _MIPS_SIM == _ABI64)
3500 #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
3501 asm (SECTION_OP "\n\
3506 .cpsetup $31, $2, 1b\n\
3507 jal " USER_LABEL_PREFIX #FUNC "\n\
3508 " TEXT_SECTION_ASM_OP);
OSDN Git Service
