1 /* Definitions of target machine for GCC for IA-32.
2 Copyright (C) 1988, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
3 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation,
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
13 GCC is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING. If not, write to
20 the Free Software Foundation, 51 Franklin Street, Fifth Floor,
21 Boston, MA 02110-1301, USA. */
23 /* Algorithm to expand string function with. */
35 #define NAX_STRINGOP_ALGS 4
36 /* Specify what algorithm to use for stringops on known size.
37 When size is unknown, the UNKNOWN_SIZE alg is used. When size is
38 known at compile time or estimated via feedback, the SIZE array
39 is walked in order until MAX is greater then the estimate (or -1
40 means infinity). Corresponding ALG is used then.
41 For example initializer:
42 {{256, loop}, {-1, rep_prefix_4_byte}}
43 will use loop for blocks smaller or equal to 256 bytes, rep prefix will
48 const enum stringop_alg unknown_size;
49 const struct stringop_strategy {
51 const enum stringop_alg alg;
52 } size [NAX_STRINGOP_ALGS];
55 /* The purpose of this file is to define the characteristics of the i386,
56 independent of assembler syntax or operating system.
58 Three other files build on this one to describe a specific assembler syntax:
59 bsd386.h, att386.h, and sun386.h.
61 The actual tm.h file for a particular system should include
62 this file, and then the file for the appropriate assembler syntax.
64 Many macros that specify assembler syntax are omitted entirely from
65 this file because they really belong in the files for particular
66 assemblers. These include RP, IP, LPREFIX, PUT_OP_SIZE, USE_STAR,
67 ADDR_BEG, ADDR_END, PRINT_IREG, PRINT_SCALE, PRINT_B_I_S, and many
68 that start with ASM_ or end in ASM_OP. */
70 /* Define the specific costs for a given cpu */
72 struct processor_costs {
73 const int add; /* cost of an add instruction */
74 const int lea; /* cost of a lea instruction */
75 const int shift_var; /* variable shift costs */
76 const int shift_const; /* constant shift costs */
77 const int mult_init[5]; /* cost of starting a multiply
78 in QImode, HImode, SImode, DImode, TImode*/
79 const int mult_bit; /* cost of multiply per each bit set */
80 const int divide[5]; /* cost of a divide/mod
81 in QImode, HImode, SImode, DImode, TImode*/
82 int movsx; /* The cost of movsx operation. */
83 int movzx; /* The cost of movzx operation. */
84 const int large_insn; /* insns larger than this cost more */
85 const int move_ratio; /* The threshold of number of scalar
86 memory-to-memory move insns. */
87 const int movzbl_load; /* cost of loading using movzbl */
88 const int int_load[3]; /* cost of loading integer registers
89 in QImode, HImode and SImode relative
90 to reg-reg move (2). */
91 const int int_store[3]; /* cost of storing integer register
92 in QImode, HImode and SImode */
93 const int fp_move; /* cost of reg,reg fld/fst */
94 const int fp_load[3]; /* cost of loading FP register
95 in SFmode, DFmode and XFmode */
96 const int fp_store[3]; /* cost of storing FP register
97 in SFmode, DFmode and XFmode */
98 const int mmx_move; /* cost of moving MMX register. */
99 const int mmx_load[2]; /* cost of loading MMX register
100 in SImode and DImode */
101 const int mmx_store[2]; /* cost of storing MMX register
102 in SImode and DImode */
103 const int sse_move; /* cost of moving SSE register. */
104 const int sse_load[3]; /* cost of loading SSE register
105 in SImode, DImode and TImode*/
106 const int sse_store[3]; /* cost of storing SSE register
107 in SImode, DImode and TImode*/
108 const int mmxsse_to_integer; /* cost of moving mmxsse register to
109 integer and vice versa. */
110 const int prefetch_block; /* bytes moved to cache for prefetch. */
111 const int simultaneous_prefetches; /* number of parallel prefetch
113 const int branch_cost; /* Default value for BRANCH_COST. */
114 const int fadd; /* cost of FADD and FSUB instructions. */
115 const int fmul; /* cost of FMUL instruction. */
116 const int fdiv; /* cost of FDIV instruction. */
117 const int fabs; /* cost of FABS instruction. */
118 const int fchs; /* cost of FCHS instruction. */
119 const int fsqrt; /* cost of FSQRT instruction. */
120 /* Specify what algorithm
121 to use for stringops on unknown size. */
122 struct stringop_algs memcpy[2], memset[2];
125 extern const struct processor_costs *ix86_cost;
127 /* Macros used in the machine description to test the flags. */
129 /* configure can arrange to make this 2, to force a 486. */
131 #ifndef TARGET_CPU_DEFAULT
132 #define TARGET_CPU_DEFAULT TARGET_CPU_DEFAULT_generic
135 #ifndef TARGET_FPMATH_DEFAULT
136 #define TARGET_FPMATH_DEFAULT \
137 (TARGET_64BIT && TARGET_SSE ? FPMATH_SSE : FPMATH_387)
140 #define TARGET_FLOAT_RETURNS_IN_80387 TARGET_FLOAT_RETURNS
142 /* 64bit Sledgehammer mode. For libgcc2 we make sure this is a
143 compile-time constant. */
147 #define TARGET_64BIT 1
149 #define TARGET_64BIT 0
152 #ifndef TARGET_BI_ARCH
154 #if TARGET_64BIT_DEFAULT
155 #define TARGET_64BIT 1
157 #define TARGET_64BIT 0
162 #define HAS_LONG_COND_BRANCH 1
163 #define HAS_LONG_UNCOND_BRANCH 1
165 #define TARGET_386 (ix86_tune == PROCESSOR_I386)
166 #define TARGET_486 (ix86_tune == PROCESSOR_I486)
167 #define TARGET_PENTIUM (ix86_tune == PROCESSOR_PENTIUM)
168 #define TARGET_PENTIUMPRO (ix86_tune == PROCESSOR_PENTIUMPRO)
169 #define TARGET_GEODE (ix86_tune == PROCESSOR_GEODE)
170 #define TARGET_K6 (ix86_tune == PROCESSOR_K6)
171 #define TARGET_ATHLON (ix86_tune == PROCESSOR_ATHLON)
172 #define TARGET_PENTIUM4 (ix86_tune == PROCESSOR_PENTIUM4)
173 #define TARGET_K8 (ix86_tune == PROCESSOR_K8)
174 #define TARGET_ATHLON_K8 (TARGET_K8 || TARGET_ATHLON)
175 #define TARGET_NOCONA (ix86_tune == PROCESSOR_NOCONA)
176 #define TARGET_CORE2 (ix86_tune == PROCESSOR_CORE2)
177 #define TARGET_GENERIC32 (ix86_tune == PROCESSOR_GENERIC32)
178 #define TARGET_GENERIC64 (ix86_tune == PROCESSOR_GENERIC64)
179 #define TARGET_GENERIC (TARGET_GENERIC32 || TARGET_GENERIC64)
180 #define TARGET_AMDFAM10 (ix86_tune == PROCESSOR_AMDFAM10)
182 /* Feature tests against the various tunings. */
183 enum ix86_tune_indices {
185 X86_TUNE_PUSH_MEMORY,
186 X86_TUNE_ZERO_EXTEND_WITH_AND,
187 X86_TUNE_USE_BIT_TEST,
188 X86_TUNE_UNROLL_STRLEN,
189 X86_TUNE_DEEP_BRANCH_PREDICTION,
190 X86_TUNE_BRANCH_PREDICTION_HINTS,
191 X86_TUNE_DOUBLE_WITH_ADD,
192 X86_TUNE_USE_SAHF, /* && !TARGET_64BIT */
194 X86_TUNE_PARTIAL_REG_STALL,
195 X86_TUNE_PARTIAL_FLAG_REG_STALL,
196 X86_TUNE_USE_HIMODE_FIOP,
197 X86_TUNE_USE_SIMODE_FIOP,
201 X86_TUNE_SPLIT_LONG_MOVES,
202 X86_TUNE_READ_MODIFY_WRITE,
203 X86_TUNE_READ_MODIFY,
204 X86_TUNE_PROMOTE_QIMODE,
205 X86_TUNE_FAST_PREFIX,
206 X86_TUNE_SINGLE_STRINGOP,
207 X86_TUNE_QIMODE_MATH,
208 X86_TUNE_HIMODE_MATH,
209 X86_TUNE_PROMOTE_QI_REGS,
210 X86_TUNE_PROMOTE_HI_REGS,
215 X86_TUNE_INTEGER_DFMODE_MOVES,
216 X86_TUNE_PARTIAL_REG_DEPENDENCY,
217 X86_TUNE_SSE_PARTIAL_REG_DEPENDENCY,
218 X86_TUNE_SSE_UNALIGNED_MOVE_OPTIMAL,
219 X86_TUNE_SSE_SPLIT_REGS,
220 X86_TUNE_SSE_TYPELESS_STORES,
221 X86_TUNE_SSE_LOAD0_BY_PXOR,
222 X86_TUNE_MEMORY_MISMATCH_STALL,
223 X86_TUNE_PROLOGUE_USING_MOVE,
224 X86_TUNE_EPILOGUE_USING_MOVE,
227 X86_TUNE_INTER_UNIT_MOVES,
228 X86_TUNE_FOUR_JUMP_LIMIT,
232 X86_TUNE_PAD_RETURNS,
233 X86_TUNE_EXT_80387_CONSTANTS,
238 extern unsigned int ix86_tune_features[X86_TUNE_LAST];
240 #define TARGET_USE_LEAVE ix86_tune_features[X86_TUNE_USE_LEAVE]
241 #define TARGET_PUSH_MEMORY ix86_tune_features[X86_TUNE_PUSH_MEMORY]
242 #define TARGET_ZERO_EXTEND_WITH_AND \
243 ix86_tune_features[X86_TUNE_ZERO_EXTEND_WITH_AND]
244 #define TARGET_USE_BIT_TEST ix86_tune_features[X86_TUNE_USE_BIT_TEST]
245 #define TARGET_UNROLL_STRLEN ix86_tune_features[X86_TUNE_UNROLL_STRLEN]
246 #define TARGET_DEEP_BRANCH_PREDICTION \
247 ix86_tune_features[X86_TUNE_DEEP_BRANCH_PREDICTION]
248 #define TARGET_BRANCH_PREDICTION_HINTS \
249 ix86_tune_features[X86_TUNE_BRANCH_PREDICTION_HINTS]
250 #define TARGET_DOUBLE_WITH_ADD ix86_tune_features[X86_TUNE_DOUBLE_WITH_ADD]
251 #define TARGET_USE_SAHF ix86_tune_features[X86_TUNE_USE_SAHF]
252 #define TARGET_MOVX ix86_tune_features[X86_TUNE_MOVX]
253 #define TARGET_PARTIAL_REG_STALL ix86_tune_features[X86_TUNE_PARTIAL_REG_STALL]
254 #define TARGET_PARTIAL_FLAG_REG_STALL \
255 ix86_tune_features[X86_TUNE_PARTIAL_FLAG_REG_STALL]
256 #define TARGET_USE_HIMODE_FIOP ix86_tune_features[X86_TUNE_USE_HIMODE_FIOP]
257 #define TARGET_USE_SIMODE_FIOP ix86_tune_features[X86_TUNE_USE_SIMODE_FIOP]
258 #define TARGET_USE_MOV0 ix86_tune_features[X86_TUNE_USE_MOV0]
259 #define TARGET_USE_CLTD ix86_tune_features[X86_TUNE_USE_CLTD]
260 #define TARGET_USE_XCHGB ix86_tune_features[X86_TUNE_USE_XCHGB]
261 #define TARGET_SPLIT_LONG_MOVES ix86_tune_features[X86_TUNE_SPLIT_LONG_MOVES]
262 #define TARGET_READ_MODIFY_WRITE ix86_tune_features[X86_TUNE_READ_MODIFY_WRITE]
263 #define TARGET_READ_MODIFY ix86_tune_features[X86_TUNE_READ_MODIFY]
264 #define TARGET_PROMOTE_QImode ix86_tune_features[X86_TUNE_PROMOTE_QIMODE]
265 #define TARGET_FAST_PREFIX ix86_tune_features[X86_TUNE_FAST_PREFIX]
266 #define TARGET_SINGLE_STRINGOP ix86_tune_features[X86_TUNE_SINGLE_STRINGOP]
267 #define TARGET_QIMODE_MATH ix86_tune_features[X86_TUNE_QIMODE_MATH]
268 #define TARGET_HIMODE_MATH ix86_tune_features[X86_TUNE_HIMODE_MATH]
269 #define TARGET_PROMOTE_QI_REGS ix86_tune_features[X86_TUNE_PROMOTE_QI_REGS]
270 #define TARGET_PROMOTE_HI_REGS ix86_tune_features[X86_TUNE_PROMOTE_HI_REGS]
271 #define TARGET_ADD_ESP_4 ix86_tune_features[X86_TUNE_ADD_ESP_4]
272 #define TARGET_ADD_ESP_8 ix86_tune_features[X86_TUNE_ADD_ESP_8]
273 #define TARGET_SUB_ESP_4 ix86_tune_features[X86_TUNE_SUB_ESP_4]
274 #define TARGET_SUB_ESP_8 ix86_tune_features[X86_TUNE_SUB_ESP_8]
275 #define TARGET_INTEGER_DFMODE_MOVES \
276 ix86_tune_features[X86_TUNE_INTEGER_DFMODE_MOVES]
277 #define TARGET_PARTIAL_REG_DEPENDENCY \
278 ix86_tune_features[X86_TUNE_PARTIAL_REG_DEPENDENCY]
279 #define TARGET_SSE_PARTIAL_REG_DEPENDENCY \
280 ix86_tune_features[X86_TUNE_SSE_PARTIAL_REG_DEPENDENCY]
281 #define TARGET_SSE_UNALIGNED_MOVE_OPTIMAL \
282 ix86_tune_features[X86_TUNE_SSE_UNALIGNED_MOVE_OPTIMAL]
283 #define TARGET_SSE_SPLIT_REGS ix86_tune_features[X86_TUNE_SSE_SPLIT_REGS]
284 #define TARGET_SSE_TYPELESS_STORES \
285 ix86_tune_features[X86_TUNE_SSE_TYPELESS_STORES]
286 #define TARGET_SSE_LOAD0_BY_PXOR ix86_tune_features[X86_TUNE_SSE_LOAD0_BY_PXOR]
287 #define TARGET_MEMORY_MISMATCH_STALL \
288 ix86_tune_features[X86_TUNE_MEMORY_MISMATCH_STALL]
289 #define TARGET_PROLOGUE_USING_MOVE \
290 ix86_tune_features[X86_TUNE_PROLOGUE_USING_MOVE]
291 #define TARGET_EPILOGUE_USING_MOVE \
292 ix86_tune_features[X86_TUNE_EPILOGUE_USING_MOVE]
293 #define TARGET_SHIFT1 ix86_tune_features[X86_TUNE_SHIFT1]
294 #define TARGET_USE_FFREEP ix86_tune_features[X86_TUNE_USE_FFREEP]
295 #define TARGET_INTER_UNIT_MOVES ix86_tune_features[X86_TUNE_INTER_UNIT_MOVES]
296 #define TARGET_FOUR_JUMP_LIMIT ix86_tune_features[X86_TUNE_FOUR_JUMP_LIMIT]
297 #define TARGET_SCHEDULE ix86_tune_features[X86_TUNE_SCHEDULE]
298 #define TARGET_USE_BT ix86_tune_features[X86_TUNE_USE_BT]
299 #define TARGET_USE_INCDEC ix86_tune_features[X86_TUNE_USE_INCDEC]
300 #define TARGET_PAD_RETURNS ix86_tune_features[X86_TUNE_PAD_RETURNS]
301 #define TARGET_EXT_80387_CONSTANTS \
302 ix86_tune_features[X86_TUNE_EXT_80387_CONSTANTS]
304 /* Feature tests against the various architecture variations. */
305 enum ix86_arch_indices {
306 X86_ARCH_CMOVE, /* || TARGET_SSE */
315 extern unsigned int ix86_arch_features[X86_ARCH_LAST];
317 #define TARGET_CMOVE ix86_arch_features[X86_ARCH_CMOVE]
318 #define TARGET_CMPXCHG ix86_arch_features[X86_ARCH_CMPXCHG]
319 #define TARGET_CMPXCHG8B ix86_arch_features[X86_ARCH_CMPXCHG8B]
320 #define TARGET_XADD ix86_arch_features[X86_ARCH_XADD]
321 #define TARGET_BSWAP ix86_arch_features[X86_ARCH_BSWAP]
323 #define TARGET_FISTTP (TARGET_SSE3 && TARGET_80387)
325 extern int x86_prefetch_sse;
326 #define TARGET_PREFETCH_SSE x86_prefetch_sse
328 extern int x86_cmpxchg16b;
329 #define TARGET_CMPXCHG16B x86_cmpxchg16b
331 #define ASSEMBLER_DIALECT (ix86_asm_dialect)
333 #define TARGET_SSE_MATH ((ix86_fpmath & FPMATH_SSE) != 0)
334 #define TARGET_MIX_SSE_I387 \
335 ((ix86_fpmath & (FPMATH_SSE | FPMATH_387)) == (FPMATH_SSE | FPMATH_387))
337 #define TARGET_GNU_TLS (ix86_tls_dialect == TLS_DIALECT_GNU)
338 #define TARGET_GNU2_TLS (ix86_tls_dialect == TLS_DIALECT_GNU2)
339 #define TARGET_ANY_GNU_TLS (TARGET_GNU_TLS || TARGET_GNU2_TLS)
340 #define TARGET_SUN_TLS (ix86_tls_dialect == TLS_DIALECT_SUN)
342 #ifndef TARGET_64BIT_DEFAULT
343 #define TARGET_64BIT_DEFAULT 0
345 #ifndef TARGET_TLS_DIRECT_SEG_REFS_DEFAULT
346 #define TARGET_TLS_DIRECT_SEG_REFS_DEFAULT 0
349 /* Once GDB has been enhanced to deal with functions without frame
350 pointers, we can change this to allow for elimination of
351 the frame pointer in leaf functions. */
352 #define TARGET_DEFAULT 0
354 /* This is not really a target flag, but is done this way so that
355 it's analogous to similar code for Mach-O on PowerPC. darwin.h
356 redefines this to 1. */
357 #define TARGET_MACHO 0
359 /* Subtargets may reset this to 1 in order to enable 96-bit long double
360 with the rounding mode forced to 53 bits. */
361 #define TARGET_96_ROUND_53_LONG_DOUBLE 0
363 /* Sometimes certain combinations of command options do not make
364 sense on a particular target machine. You can define a macro
365 `OVERRIDE_OPTIONS' to take account of this. This macro, if
366 defined, is executed once just after all the command options have
369 Don't use this macro to turn on various extra optimizations for
370 `-O'. That is what `OPTIMIZATION_OPTIONS' is for. */
372 #define OVERRIDE_OPTIONS override_options ()
374 /* Define this to change the optimizations performed by default. */
375 #define OPTIMIZATION_OPTIONS(LEVEL, SIZE) \
376 optimization_options ((LEVEL), (SIZE))
378 /* -march=native handling only makes sense with compiler running on
379 an x86 or x86_64 chip. If changing this condition, also change
380 the condition in driver-i386.c. */
381 #if defined(__i386__) || defined(__x86_64__)
382 /* In driver-i386.c. */
383 extern const char *host_detect_local_cpu (int argc, const char **argv);
384 #define EXTRA_SPEC_FUNCTIONS \
385 { "local_cpu_detect", host_detect_local_cpu },
386 #define HAVE_LOCAL_CPU_DETECT
389 /* Support for configure-time defaults of some command line options.
390 The order here is important so that -march doesn't squash the
391 tune or cpu values. */
392 #define OPTION_DEFAULT_SPECS \
393 {"tune", "%{!mtune=*:%{!mcpu=*:%{!march=*:-mtune=%(VALUE)}}}" }, \
394 {"cpu", "%{!mtune=*:%{!mcpu=*:%{!march=*:-mtune=%(VALUE)}}}" }, \
395 {"arch", "%{!march=*:-march=%(VALUE)}"}
397 /* Specs for the compiler proper */
400 #define CC1_CPU_SPEC_1 "\
403 %n`-m386' is deprecated. Use `-march=i386' or `-mtune=i386' instead.\n} \
405 %n`-m486' is deprecated. Use `-march=i486' or `-mtune=i486' instead.\n} \
406 %{mpentium:-mtune=pentium \
407 %n`-mpentium' is deprecated. Use `-march=pentium' or `-mtune=pentium' instead.\n} \
408 %{mpentiumpro:-mtune=pentiumpro \
409 %n`-mpentiumpro' is deprecated. Use `-march=pentiumpro' or `-mtune=pentiumpro' instead.\n} \
411 %n`-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.\n}} \
413 %{mintel-syntax:-masm=intel \
414 %n`-mintel-syntax' is deprecated. Use `-masm=intel' instead.\n} \
415 %{mno-intel-syntax:-masm=att \
416 %n`-mno-intel-syntax' is deprecated. Use `-masm=att' instead.\n}"
418 #ifndef HAVE_LOCAL_CPU_DETECT
419 #define CC1_CPU_SPEC CC1_CPU_SPEC_1
421 #define CC1_CPU_SPEC CC1_CPU_SPEC_1 \
422 "%{march=native:%<march=native %:local_cpu_detect(arch) \
423 %{!mtune=*:%<mtune=native %:local_cpu_detect(tune)}} \
424 %{mtune=native:%<mtune=native %:local_cpu_detect(tune)}"
428 /* Target CPU builtins. */
429 #define TARGET_CPU_CPP_BUILTINS() \
432 size_t arch_len = strlen (ix86_arch_string); \
433 size_t tune_len = strlen (ix86_tune_string); \
434 int last_arch_char = ix86_arch_string[arch_len - 1]; \
435 int last_tune_char = ix86_tune_string[tune_len - 1]; \
439 builtin_assert ("cpu=x86_64"); \
440 builtin_assert ("machine=x86_64"); \
441 builtin_define ("__amd64"); \
442 builtin_define ("__amd64__"); \
443 builtin_define ("__x86_64"); \
444 builtin_define ("__x86_64__"); \
448 builtin_assert ("cpu=i386"); \
449 builtin_assert ("machine=i386"); \
450 builtin_define_std ("i386"); \
453 /* Built-ins based on -mtune= (or -march= if no \
456 builtin_define ("__tune_i386__"); \
457 else if (TARGET_486) \
458 builtin_define ("__tune_i486__"); \
459 else if (TARGET_PENTIUM) \
461 builtin_define ("__tune_i586__"); \
462 builtin_define ("__tune_pentium__"); \
463 if (last_tune_char == 'x') \
464 builtin_define ("__tune_pentium_mmx__"); \
466 else if (TARGET_PENTIUMPRO) \
468 builtin_define ("__tune_i686__"); \
469 builtin_define ("__tune_pentiumpro__"); \
470 switch (last_tune_char) \
473 builtin_define ("__tune_pentium3__"); \
476 builtin_define ("__tune_pentium2__"); \
480 else if (TARGET_GEODE) \
482 builtin_define ("__tune_geode__"); \
484 else if (TARGET_K6) \
486 builtin_define ("__tune_k6__"); \
487 if (last_tune_char == '2') \
488 builtin_define ("__tune_k6_2__"); \
489 else if (last_tune_char == '3') \
490 builtin_define ("__tune_k6_3__"); \
492 else if (TARGET_ATHLON) \
494 builtin_define ("__tune_athlon__"); \
495 /* Only plain "athlon" lacks SSE. */ \
496 if (last_tune_char != 'n') \
497 builtin_define ("__tune_athlon_sse__"); \
499 else if (TARGET_K8) \
500 builtin_define ("__tune_k8__"); \
501 else if (TARGET_AMDFAM10) \
502 builtin_define ("__tune_amdfam10__"); \
503 else if (TARGET_PENTIUM4) \
504 builtin_define ("__tune_pentium4__"); \
505 else if (TARGET_NOCONA) \
506 builtin_define ("__tune_nocona__"); \
507 else if (TARGET_CORE2) \
508 builtin_define ("__tune_core2__"); \
511 builtin_define ("__MMX__"); \
513 builtin_define ("__3dNOW__"); \
514 if (TARGET_3DNOW_A) \
515 builtin_define ("__3dNOW_A__"); \
517 builtin_define ("__SSE__"); \
519 builtin_define ("__SSE2__"); \
521 builtin_define ("__SSE3__"); \
523 builtin_define ("__SSSE3__"); \
525 builtin_define ("__SSE4A__"); \
526 if (TARGET_SSE_MATH && TARGET_SSE) \
527 builtin_define ("__SSE_MATH__"); \
528 if (TARGET_SSE_MATH && TARGET_SSE2) \
529 builtin_define ("__SSE2_MATH__"); \
531 /* Built-ins based on -march=. */ \
532 if (ix86_arch == PROCESSOR_I486) \
534 builtin_define ("__i486"); \
535 builtin_define ("__i486__"); \
537 else if (ix86_arch == PROCESSOR_PENTIUM) \
539 builtin_define ("__i586"); \
540 builtin_define ("__i586__"); \
541 builtin_define ("__pentium"); \
542 builtin_define ("__pentium__"); \
543 if (last_arch_char == 'x') \
544 builtin_define ("__pentium_mmx__"); \
546 else if (ix86_arch == PROCESSOR_PENTIUMPRO) \
548 builtin_define ("__i686"); \
549 builtin_define ("__i686__"); \
550 builtin_define ("__pentiumpro"); \
551 builtin_define ("__pentiumpro__"); \
553 else if (ix86_arch == PROCESSOR_GEODE) \
555 builtin_define ("__geode"); \
556 builtin_define ("__geode__"); \
558 else if (ix86_arch == PROCESSOR_K6) \
561 builtin_define ("__k6"); \
562 builtin_define ("__k6__"); \
563 if (last_arch_char == '2') \
564 builtin_define ("__k6_2__"); \
565 else if (last_arch_char == '3') \
566 builtin_define ("__k6_3__"); \
568 else if (ix86_arch == PROCESSOR_ATHLON) \
570 builtin_define ("__athlon"); \
571 builtin_define ("__athlon__"); \
572 /* Only plain "athlon" lacks SSE. */ \
573 if (last_arch_char != 'n') \
574 builtin_define ("__athlon_sse__"); \
576 else if (ix86_arch == PROCESSOR_K8) \
578 builtin_define ("__k8"); \
579 builtin_define ("__k8__"); \
581 else if (ix86_arch == PROCESSOR_AMDFAM10) \
583 builtin_define ("__amdfam10"); \
584 builtin_define ("__amdfam10__"); \
586 else if (ix86_arch == PROCESSOR_PENTIUM4) \
588 builtin_define ("__pentium4"); \
589 builtin_define ("__pentium4__"); \
591 else if (ix86_arch == PROCESSOR_NOCONA) \
593 builtin_define ("__nocona"); \
594 builtin_define ("__nocona__"); \
596 else if (ix86_arch == PROCESSOR_CORE2) \
598 builtin_define ("__core2"); \
599 builtin_define ("__core2__"); \
604 #define TARGET_CPU_DEFAULT_i386 0
605 #define TARGET_CPU_DEFAULT_i486 1
606 #define TARGET_CPU_DEFAULT_pentium 2
607 #define TARGET_CPU_DEFAULT_pentium_mmx 3
608 #define TARGET_CPU_DEFAULT_pentiumpro 4
609 #define TARGET_CPU_DEFAULT_pentium2 5
610 #define TARGET_CPU_DEFAULT_pentium3 6
611 #define TARGET_CPU_DEFAULT_pentium4 7
612 #define TARGET_CPU_DEFAULT_geode 8
613 #define TARGET_CPU_DEFAULT_k6 9
614 #define TARGET_CPU_DEFAULT_k6_2 10
615 #define TARGET_CPU_DEFAULT_k6_3 11
616 #define TARGET_CPU_DEFAULT_athlon 12
617 #define TARGET_CPU_DEFAULT_athlon_sse 13
618 #define TARGET_CPU_DEFAULT_k8 14
619 #define TARGET_CPU_DEFAULT_pentium_m 15
620 #define TARGET_CPU_DEFAULT_prescott 16
621 #define TARGET_CPU_DEFAULT_nocona 17
622 #define TARGET_CPU_DEFAULT_core2 18
623 #define TARGET_CPU_DEFAULT_generic 19
624 #define TARGET_CPU_DEFAULT_amdfam10 20
626 #define TARGET_CPU_DEFAULT_NAMES {"i386", "i486", "pentium", "pentium-mmx",\
627 "pentiumpro", "pentium2", "pentium3", \
628 "pentium4", "geode", "k6", "k6-2", "k6-3", \
629 "athlon", "athlon-4", "k8", \
630 "pentium-m", "prescott", "nocona", \
631 "core2", "generic", "amdfam10"}
634 #define CC1_SPEC "%(cc1_cpu) "
637 /* This macro defines names of additional specifications to put in the
638 specs that can be used in various specifications like CC1_SPEC. Its
639 definition is an initializer with a subgrouping for each command option.
641 Each subgrouping contains a string constant, that defines the
642 specification name, and a string constant that used by the GCC driver
645 Do not define this macro if it does not need to do anything. */
647 #ifndef SUBTARGET_EXTRA_SPECS
648 #define SUBTARGET_EXTRA_SPECS
651 #define EXTRA_SPECS \
652 { "cc1_cpu", CC1_CPU_SPEC }, \
653 SUBTARGET_EXTRA_SPECS
655 /* target machine storage layout */
657 #define LONG_DOUBLE_TYPE_SIZE 80
659 /* Set the value of FLT_EVAL_METHOD in float.h. When using only the
660 FPU, assume that the fpcw is set to extended precision; when using
661 only SSE, rounding is correct; when using both SSE and the FPU,
662 the rounding precision is indeterminate, since either may be chosen
663 apparently at random. */
664 #define TARGET_FLT_EVAL_METHOD \
665 (TARGET_MIX_SSE_I387 ? -1 : TARGET_SSE_MATH ? 0 : 2)
667 #define SHORT_TYPE_SIZE 16
668 #define INT_TYPE_SIZE 32
669 #define FLOAT_TYPE_SIZE 32
670 #define LONG_TYPE_SIZE BITS_PER_WORD
671 #define DOUBLE_TYPE_SIZE 64
672 #define LONG_LONG_TYPE_SIZE 64
674 #if defined (TARGET_BI_ARCH) || TARGET_64BIT_DEFAULT
675 #define MAX_BITS_PER_WORD 64
677 #define MAX_BITS_PER_WORD 32
680 /* Define this if most significant byte of a word is the lowest numbered. */
681 /* That is true on the 80386. */
683 #define BITS_BIG_ENDIAN 0
685 /* Define this if most significant byte of a word is the lowest numbered. */
686 /* That is not true on the 80386. */
687 #define BYTES_BIG_ENDIAN 0
689 /* Define this if most significant word of a multiword number is the lowest
691 /* Not true for 80386 */
692 #define WORDS_BIG_ENDIAN 0
694 /* Width of a word, in units (bytes). */
695 #define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
697 #define MIN_UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
699 #define MIN_UNITS_PER_WORD 4
702 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
703 #define PARM_BOUNDARY BITS_PER_WORD
705 /* Boundary (in *bits*) on which stack pointer should be aligned. */
706 #define STACK_BOUNDARY BITS_PER_WORD
708 /* Boundary (in *bits*) on which the stack pointer prefers to be
709 aligned; the compiler cannot rely on having this alignment. */
710 #define PREFERRED_STACK_BOUNDARY ix86_preferred_stack_boundary
712 /* As of July 2001, many runtimes do not align the stack properly when
713 entering main. This causes expand_main_function to forcibly align
714 the stack, which results in aligned frames for functions called from
715 main, though it does nothing for the alignment of main itself. */
716 #define FORCE_PREFERRED_STACK_BOUNDARY_IN_MAIN \
717 (ix86_preferred_stack_boundary > STACK_BOUNDARY && !TARGET_64BIT)
719 /* Target OS keeps a vector-aligned (128-bit, 16-byte) stack. This is
720 mandatory for the 64-bit ABI, and may or may not be true for other
721 operating systems. */
722 #define TARGET_KEEPS_VECTOR_ALIGNED_STACK TARGET_64BIT
724 /* Minimum allocation boundary for the code of a function. */
725 #define FUNCTION_BOUNDARY 8
727 /* C++ stores the virtual bit in the lowest bit of function pointers. */
728 #define TARGET_PTRMEMFUNC_VBIT_LOCATION ptrmemfunc_vbit_in_pfn
730 /* Alignment of field after `int : 0' in a structure. */
732 #define EMPTY_FIELD_BOUNDARY BITS_PER_WORD
734 /* Minimum size in bits of the largest boundary to which any
735 and all fundamental data types supported by the hardware
736 might need to be aligned. No data type wants to be aligned
739 Pentium+ prefers DFmode values to be aligned to 64 bit boundary
740 and Pentium Pro XFmode values at 128 bit boundaries. */
742 #define BIGGEST_ALIGNMENT 128
744 /* Decide whether a variable of mode MODE should be 128 bit aligned. */
745 #define ALIGN_MODE_128(MODE) \
746 ((MODE) == XFmode || SSE_REG_MODE_P (MODE))
748 /* The published ABIs say that doubles should be aligned on word
749 boundaries, so lower the alignment for structure fields unless
750 -malign-double is set. */
752 /* ??? Blah -- this macro is used directly by libobjc. Since it
753 supports no vector modes, cut out the complexity and fall back
754 on BIGGEST_FIELD_ALIGNMENT. */
755 #ifdef IN_TARGET_LIBS
757 #define BIGGEST_FIELD_ALIGNMENT 128
759 #define BIGGEST_FIELD_ALIGNMENT 32
762 #define ADJUST_FIELD_ALIGN(FIELD, COMPUTED) \
763 x86_field_alignment (FIELD, COMPUTED)
766 /* If defined, a C expression to compute the alignment given to a
767 constant that is being placed in memory. EXP is the constant
768 and ALIGN is the alignment that the object would ordinarily have.
769 The value of this macro is used instead of that alignment to align
772 If this macro is not defined, then ALIGN is used.
774 The typical use of this macro is to increase alignment for string
775 constants to be word aligned so that `strcpy' calls that copy
776 constants can be done inline. */
778 #define CONSTANT_ALIGNMENT(EXP, ALIGN) ix86_constant_alignment ((EXP), (ALIGN))
780 /* If defined, a C expression to compute the alignment for a static
781 variable. TYPE is the data type, and ALIGN is the alignment that
782 the object would ordinarily have. The value of this macro is used
783 instead of that alignment to align the object.
785 If this macro is not defined, then ALIGN is used.
787 One use of this macro is to increase alignment of medium-size
788 data to make it all fit in fewer cache lines. Another is to
789 cause character arrays to be word-aligned so that `strcpy' calls
790 that copy constants to character arrays can be done inline. */
792 #define DATA_ALIGNMENT(TYPE, ALIGN) ix86_data_alignment ((TYPE), (ALIGN))
794 /* If defined, a C expression to compute the alignment for a local
795 variable. TYPE is the data type, and ALIGN is the alignment that
796 the object would ordinarily have. The value of this macro is used
797 instead of that alignment to align the object.
799 If this macro is not defined, then ALIGN is used.
801 One use of this macro is to increase alignment of medium-size
802 data to make it all fit in fewer cache lines. */
804 #define LOCAL_ALIGNMENT(TYPE, ALIGN) ix86_local_alignment ((TYPE), (ALIGN))
806 /* If defined, a C expression that gives the alignment boundary, in
807 bits, of an argument with the specified mode and type. If it is
808 not defined, `PARM_BOUNDARY' is used for all arguments. */
810 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
811 ix86_function_arg_boundary ((MODE), (TYPE))
813 /* Set this nonzero if move instructions will actually fail to work
814 when given unaligned data. */
815 #define STRICT_ALIGNMENT 0
817 /* If bit field type is int, don't let it cross an int,
818 and give entire struct the alignment of an int. */
819 /* Required on the 386 since it doesn't have bit-field insns. */
820 #define PCC_BITFIELD_TYPE_MATTERS 1
822 /* Standard register usage. */
824 /* This processor has special stack-like registers. See reg-stack.c
828 #define IS_STACK_MODE(MODE) \
829 (((MODE) == SFmode && (!TARGET_SSE || !TARGET_SSE_MATH)) \
830 || ((MODE) == DFmode && (!TARGET_SSE2 || !TARGET_SSE_MATH)) \
833 /* Number of actual hardware registers.
834 The hardware registers are assigned numbers for the compiler
835 from 0 to just below FIRST_PSEUDO_REGISTER.
836 All registers that the compiler knows about must be given numbers,
837 even those that are not normally considered general registers.
839 In the 80386 we give the 8 general purpose registers the numbers 0-7.
840 We number the floating point registers 8-15.
841 Note that registers 0-7 can be accessed as a short or int,
842 while only 0-3 may be used with byte `mov' instructions.
844 Reg 16 does not correspond to any hardware register, but instead
845 appears in the RTL as an argument pointer prior to reload, and is
846 eliminated during reloading in favor of either the stack or frame
849 #define FIRST_PSEUDO_REGISTER 53
851 /* Number of hardware registers that go into the DWARF-2 unwind info.
852 If not defined, equals FIRST_PSEUDO_REGISTER. */
854 #define DWARF_FRAME_REGISTERS 17
856 /* 1 for registers that have pervasive standard uses
857 and are not available for the register allocator.
858 On the 80386, the stack pointer is such, as is the arg pointer.
860 The value is zero if the register is not fixed on either 32 or
861 64 bit targets, one if the register if fixed on both 32 and 64
862 bit targets, two if it is only fixed on 32bit targets and three
863 if its only fixed on 64bit targets.
864 Proper values are computed in the CONDITIONAL_REGISTER_USAGE.
866 #define FIXED_REGISTERS \
867 /*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7*/ \
868 { 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, \
869 /*arg,flags,fpsr,fpcr,frame*/ \
871 /*xmm0,xmm1,xmm2,xmm3,xmm4,xmm5,xmm6,xmm7*/ \
872 0, 0, 0, 0, 0, 0, 0, 0, \
873 /*mmx0,mmx1,mmx2,mmx3,mmx4,mmx5,mmx6,mmx7*/ \
874 0, 0, 0, 0, 0, 0, 0, 0, \
875 /* r8, r9, r10, r11, r12, r13, r14, r15*/ \
876 2, 2, 2, 2, 2, 2, 2, 2, \
877 /*xmm8,xmm9,xmm10,xmm11,xmm12,xmm13,xmm14,xmm15*/ \
878 2, 2, 2, 2, 2, 2, 2, 2}
881 /* 1 for registers not available across function calls.
882 These must include the FIXED_REGISTERS and also any
883 registers that can be used without being saved.
884 The latter must include the registers where values are returned
885 and the register where structure-value addresses are passed.
886 Aside from that, you can include as many other registers as you like.
888 The value is zero if the register is not call used on either 32 or
889 64 bit targets, one if the register if call used on both 32 and 64
890 bit targets, two if it is only call used on 32bit targets and three
891 if its only call used on 64bit targets.
892 Proper values are computed in the CONDITIONAL_REGISTER_USAGE.
894 #define CALL_USED_REGISTERS \
895 /*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7*/ \
896 { 1, 1, 1, 0, 3, 3, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
897 /*arg,flags,fpsr,fpcr,frame*/ \
899 /*xmm0,xmm1,xmm2,xmm3,xmm4,xmm5,xmm6,xmm7*/ \
900 1, 1, 1, 1, 1, 1, 1, 1, \
901 /*mmx0,mmx1,mmx2,mmx3,mmx4,mmx5,mmx6,mmx7*/ \
902 1, 1, 1, 1, 1, 1, 1, 1, \
903 /* r8, r9, r10, r11, r12, r13, r14, r15*/ \
904 1, 1, 1, 1, 2, 2, 2, 2, \
905 /*xmm8,xmm9,xmm10,xmm11,xmm12,xmm13,xmm14,xmm15*/ \
906 1, 1, 1, 1, 1, 1, 1, 1} \
908 /* Order in which to allocate registers. Each register must be
909 listed once, even those in FIXED_REGISTERS. List frame pointer
910 late and fixed registers last. Note that, in general, we prefer
911 registers listed in CALL_USED_REGISTERS, keeping the others
912 available for storage of persistent values.
914 The ORDER_REGS_FOR_LOCAL_ALLOC actually overwrite the order,
915 so this is just empty initializer for array. */
917 #define REG_ALLOC_ORDER \
918 { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\
919 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, \
920 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
923 /* ORDER_REGS_FOR_LOCAL_ALLOC is a macro which permits reg_alloc_order
924 to be rearranged based on a particular function. When using sse math,
925 we want to allocate SSE before x87 registers and vice versa. */
927 #define ORDER_REGS_FOR_LOCAL_ALLOC x86_order_regs_for_local_alloc ()
930 /* Macro to conditionally modify fixed_regs/call_used_regs. */
931 #define CONDITIONAL_REGISTER_USAGE \
935 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) \
937 if (fixed_regs[i] > 1) \
938 fixed_regs[i] = (fixed_regs[i] == (TARGET_64BIT ? 3 : 2)); \
939 if (call_used_regs[i] > 1) \
940 call_used_regs[i] = (call_used_regs[i] \
941 == (TARGET_64BIT ? 3 : 2)); \
943 j = PIC_OFFSET_TABLE_REGNUM; \
944 if (j != INVALID_REGNUM) \
947 call_used_regs[j] = 1; \
952 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) \
953 if (TEST_HARD_REG_BIT (reg_class_contents[(int)MMX_REGS], i)) \
954 fixed_regs[i] = call_used_regs[i] = 1, reg_names[i] = ""; \
959 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) \
960 if (TEST_HARD_REG_BIT (reg_class_contents[(int)SSE_REGS], i)) \
961 fixed_regs[i] = call_used_regs[i] = 1, reg_names[i] = ""; \
963 if (! TARGET_80387 && ! TARGET_FLOAT_RETURNS_IN_80387) \
967 COPY_HARD_REG_SET (x, reg_class_contents[(int)FLOAT_REGS]); \
968 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) \
969 if (TEST_HARD_REG_BIT (x, i)) \
970 fixed_regs[i] = call_used_regs[i] = 1, reg_names[i] = ""; \
972 if (! TARGET_64BIT) \
975 for (i = FIRST_REX_INT_REG; i <= LAST_REX_INT_REG; i++) \
977 for (i = FIRST_REX_SSE_REG; i <= LAST_REX_SSE_REG; i++) \
982 /* Return number of consecutive hard regs needed starting at reg REGNO
983 to hold something of mode MODE.
984 This is ordinarily the length in words of a value of mode MODE
985 but can be less for certain modes in special long registers.
987 Actually there are no two word move instructions for consecutive
988 registers. And only registers 0-3 may have mov byte instructions
992 #define HARD_REGNO_NREGS(REGNO, MODE) \
993 (FP_REGNO_P (REGNO) || SSE_REGNO_P (REGNO) || MMX_REGNO_P (REGNO) \
994 ? (COMPLEX_MODE_P (MODE) ? 2 : 1) \
995 : ((MODE) == XFmode \
996 ? (TARGET_64BIT ? 2 : 3) \
998 ? (TARGET_64BIT ? 4 : 6) \
999 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)))
1001 #define HARD_REGNO_NREGS_HAS_PADDING(REGNO, MODE) \
1002 ((TARGET_128BIT_LONG_DOUBLE && !TARGET_64BIT) \
1003 ? (FP_REGNO_P (REGNO) || SSE_REGNO_P (REGNO) || MMX_REGNO_P (REGNO) \
1005 : ((MODE) == XFmode || (MODE) == XCmode)) \
1008 #define HARD_REGNO_NREGS_WITH_PADDING(REGNO, MODE) ((MODE) == XFmode ? 4 : 8)
1010 #define VALID_SSE2_REG_MODE(MODE) \
1011 ((MODE) == V16QImode || (MODE) == V8HImode || (MODE) == V2DFmode \
1012 || (MODE) == V2DImode || (MODE) == DFmode)
1014 #define VALID_SSE_REG_MODE(MODE) \
1015 ((MODE) == TImode || (MODE) == V4SFmode || (MODE) == V4SImode \
1016 || (MODE) == SFmode || (MODE) == TFmode)
1018 #define VALID_MMX_REG_MODE_3DNOW(MODE) \
1019 ((MODE) == V2SFmode || (MODE) == SFmode)
1021 #define VALID_MMX_REG_MODE(MODE) \
1022 ((MODE) == DImode || (MODE) == V8QImode || (MODE) == V4HImode \
1023 || (MODE) == V2SImode || (MODE) == SImode)
1025 /* ??? No autovectorization into MMX or 3DNOW until we can reliably
1026 place emms and femms instructions. */
1027 #define UNITS_PER_SIMD_WORD (TARGET_SSE ? 16 : UNITS_PER_WORD)
1029 #define VALID_FP_MODE_P(MODE) \
1030 ((MODE) == SFmode || (MODE) == DFmode || (MODE) == XFmode \
1031 || (MODE) == SCmode || (MODE) == DCmode || (MODE) == XCmode) \
1033 #define VALID_INT_MODE_P(MODE) \
1034 ((MODE) == QImode || (MODE) == HImode || (MODE) == SImode \
1035 || (MODE) == DImode \
1036 || (MODE) == CQImode || (MODE) == CHImode || (MODE) == CSImode \
1037 || (MODE) == CDImode \
1038 || (TARGET_64BIT && ((MODE) == TImode || (MODE) == CTImode \
1039 || (MODE) == TFmode || (MODE) == TCmode)))
1041 /* Return true for modes passed in SSE registers. */
1042 #define SSE_REG_MODE_P(MODE) \
1043 ((MODE) == TImode || (MODE) == V16QImode || (MODE) == TFmode \
1044 || (MODE) == V8HImode || (MODE) == V2DFmode || (MODE) == V2DImode \
1045 || (MODE) == V4SFmode || (MODE) == V4SImode)
1047 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. */
1049 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
1050 ix86_hard_regno_mode_ok ((REGNO), (MODE))
1052 /* Value is 1 if it is a good idea to tie two pseudo registers
1053 when one has mode MODE1 and one has mode MODE2.
1054 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
1055 for any hard reg, then this must be 0 for correct output. */
1057 #define MODES_TIEABLE_P(MODE1, MODE2) ix86_modes_tieable_p (MODE1, MODE2)
1059 /* It is possible to write patterns to move flags; but until someone
1061 #define AVOID_CCMODE_COPIES
1063 /* Specify the modes required to caller save a given hard regno.
1064 We do this on i386 to prevent flags from being saved at all.
1066 Kill any attempts to combine saving of modes. */
1068 #define HARD_REGNO_CALLER_SAVE_MODE(REGNO, NREGS, MODE) \
1069 (CC_REGNO_P (REGNO) ? VOIDmode \
1070 : (MODE) == VOIDmode && (NREGS) != 1 ? VOIDmode \
1071 : (MODE) == VOIDmode ? choose_hard_reg_mode ((REGNO), (NREGS), false)\
1072 : (MODE) == HImode && !TARGET_PARTIAL_REG_STALL ? SImode \
1073 : (MODE) == QImode && (REGNO) >= 4 && !TARGET_64BIT ? SImode \
1075 /* Specify the registers used for certain standard purposes.
1076 The values of these macros are register numbers. */
1078 /* on the 386 the pc register is %eip, and is not usable as a general
1079 register. The ordinary mov instructions won't work */
1080 /* #define PC_REGNUM */
1082 /* Register to use for pushing function arguments. */
1083 #define STACK_POINTER_REGNUM 7
1085 /* Base register for access to local variables of the function. */
1086 #define HARD_FRAME_POINTER_REGNUM 6
1088 /* Base register for access to local variables of the function. */
1089 #define FRAME_POINTER_REGNUM 20
1091 /* First floating point reg */
1092 #define FIRST_FLOAT_REG 8
1094 /* First & last stack-like regs */
1095 #define FIRST_STACK_REG FIRST_FLOAT_REG
1096 #define LAST_STACK_REG (FIRST_FLOAT_REG + 7)
1098 #define FIRST_SSE_REG (FRAME_POINTER_REGNUM + 1)
1099 #define LAST_SSE_REG (FIRST_SSE_REG + 7)
1101 #define FIRST_MMX_REG (LAST_SSE_REG + 1)
1102 #define LAST_MMX_REG (FIRST_MMX_REG + 7)
1104 #define FIRST_REX_INT_REG (LAST_MMX_REG + 1)
1105 #define LAST_REX_INT_REG (FIRST_REX_INT_REG + 7)
1107 #define FIRST_REX_SSE_REG (LAST_REX_INT_REG + 1)
1108 #define LAST_REX_SSE_REG (FIRST_REX_SSE_REG + 7)
1110 /* Value should be nonzero if functions must have frame pointers.
1111 Zero means the frame pointer need not be set up (and parms
1112 may be accessed via the stack pointer) in functions that seem suitable.
1113 This is computed in `reload', in reload1.c. */
1114 #define FRAME_POINTER_REQUIRED ix86_frame_pointer_required ()
1116 /* Override this in other tm.h files to cope with various OS lossage
1117 requiring a frame pointer. */
1118 #ifndef SUBTARGET_FRAME_POINTER_REQUIRED
1119 #define SUBTARGET_FRAME_POINTER_REQUIRED 0
1122 /* Make sure we can access arbitrary call frames. */
1123 #define SETUP_FRAME_ADDRESSES() ix86_setup_frame_addresses ()
1125 /* Base register for access to arguments of the function. */
1126 #define ARG_POINTER_REGNUM 16
1128 /* Register in which static-chain is passed to a function.
1129 We do use ECX as static chain register for 32 bit ABI. On the
1130 64bit ABI, ECX is an argument register, so we use R10 instead. */
1131 #define STATIC_CHAIN_REGNUM (TARGET_64BIT ? FIRST_REX_INT_REG + 10 - 8 : 2)
1133 /* Register to hold the addressing base for position independent
1134 code access to data items. We don't use PIC pointer for 64bit
1135 mode. Define the regnum to dummy value to prevent gcc from
1136 pessimizing code dealing with EBX.
1138 To avoid clobbering a call-saved register unnecessarily, we renumber
1139 the pic register when possible. The change is visible after the
1140 prologue has been emitted. */
1142 #define REAL_PIC_OFFSET_TABLE_REGNUM 3
1144 #define PIC_OFFSET_TABLE_REGNUM \
1145 ((TARGET_64BIT && ix86_cmodel == CM_SMALL_PIC) \
1146 || !flag_pic ? INVALID_REGNUM \
1147 : reload_completed ? REGNO (pic_offset_table_rtx) \
1148 : REAL_PIC_OFFSET_TABLE_REGNUM)
1150 #define GOT_SYMBOL_NAME "_GLOBAL_OFFSET_TABLE_"
1152 /* A C expression which can inhibit the returning of certain function
1153 values in registers, based on the type of value. A nonzero value
1154 says to return the function value in memory, just as large
1155 structures are always returned. Here TYPE will be a C expression
1156 of type `tree', representing the data type of the value.
1158 Note that values of mode `BLKmode' must be explicitly handled by
1159 this macro. Also, the option `-fpcc-struct-return' takes effect
1160 regardless of this macro. On most systems, it is possible to
1161 leave the macro undefined; this causes a default definition to be
1162 used, whose value is the constant 1 for `BLKmode' values, and 0
1165 Do not use this macro to indicate that structures and unions
1166 should always be returned in memory. You should instead use
1167 `DEFAULT_PCC_STRUCT_RETURN' to indicate this. */
1169 #define RETURN_IN_MEMORY(TYPE) \
1170 ix86_return_in_memory (TYPE)
1172 /* This is overridden by <cygwin.h>. */
1173 #define MS_AGGREGATE_RETURN 0
1175 /* This is overridden by <netware.h>. */
1176 #define KEEP_AGGREGATE_RETURN_POINTER 0
1178 /* Define the classes of registers for register constraints in the
1179 machine description. Also define ranges of constants.
1181 One of the classes must always be named ALL_REGS and include all hard regs.
1182 If there is more than one class, another class must be named NO_REGS
1183 and contain no registers.
1185 The name GENERAL_REGS must be the name of a class (or an alias for
1186 another name such as ALL_REGS). This is the class of registers
1187 that is allowed by "g" or "r" in a register constraint.
1188 Also, registers outside this class are allocated only when
1189 instructions express preferences for them.
1191 The classes must be numbered in nondecreasing order; that is,
1192 a larger-numbered class must never be contained completely
1193 in a smaller-numbered class.
1195 For any two classes, it is very desirable that there be another
1196 class that represents their union.
1198 It might seem that class BREG is unnecessary, since no useful 386
1199 opcode needs reg %ebx. But some systems pass args to the OS in ebx,
1200 and the "b" register constraint is useful in asms for syscalls.
1202 The flags, fpsr and fpcr registers are in no class. */
1207 AREG, DREG, CREG, BREG, SIREG, DIREG,
1208 AD_REGS, /* %eax/%edx for DImode */
1209 Q_REGS, /* %eax %ebx %ecx %edx */
1210 NON_Q_REGS, /* %esi %edi %ebp %esp */
1211 INDEX_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp */
1212 LEGACY_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp %esp */
1213 GENERAL_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp %esp %r8 - %r15*/
1214 FP_TOP_REG, FP_SECOND_REG, /* %st(0) %st(1) */
1224 ALL_REGS, LIM_REG_CLASSES
1227 #define N_REG_CLASSES ((int) LIM_REG_CLASSES)
1229 #define INTEGER_CLASS_P(CLASS) \
1230 reg_class_subset_p ((CLASS), GENERAL_REGS)
1231 #define FLOAT_CLASS_P(CLASS) \
1232 reg_class_subset_p ((CLASS), FLOAT_REGS)
1233 #define SSE_CLASS_P(CLASS) \
1234 ((CLASS) == SSE_REGS)
1235 #define MMX_CLASS_P(CLASS) \
1236 ((CLASS) == MMX_REGS)
1237 #define MAYBE_INTEGER_CLASS_P(CLASS) \
1238 reg_classes_intersect_p ((CLASS), GENERAL_REGS)
1239 #define MAYBE_FLOAT_CLASS_P(CLASS) \
1240 reg_classes_intersect_p ((CLASS), FLOAT_REGS)
1241 #define MAYBE_SSE_CLASS_P(CLASS) \
1242 reg_classes_intersect_p (SSE_REGS, (CLASS))
1243 #define MAYBE_MMX_CLASS_P(CLASS) \
1244 reg_classes_intersect_p (MMX_REGS, (CLASS))
1246 #define Q_CLASS_P(CLASS) \
1247 reg_class_subset_p ((CLASS), Q_REGS)
1249 /* Give names of register classes as strings for dump file. */
1251 #define REG_CLASS_NAMES \
1253 "AREG", "DREG", "CREG", "BREG", \
1256 "Q_REGS", "NON_Q_REGS", \
1260 "FP_TOP_REG", "FP_SECOND_REG", \
1264 "FP_TOP_SSE_REGS", \
1265 "FP_SECOND_SSE_REGS", \
1269 "FLOAT_INT_SSE_REGS", \
1272 /* Define which registers fit in which classes.
1273 This is an initializer for a vector of HARD_REG_SET
1274 of length N_REG_CLASSES. */
1276 #define REG_CLASS_CONTENTS \
1278 { 0x01, 0x0 }, { 0x02, 0x0 }, /* AREG, DREG */ \
1279 { 0x04, 0x0 }, { 0x08, 0x0 }, /* CREG, BREG */ \
1280 { 0x10, 0x0 }, { 0x20, 0x0 }, /* SIREG, DIREG */ \
1281 { 0x03, 0x0 }, /* AD_REGS */ \
1282 { 0x0f, 0x0 }, /* Q_REGS */ \
1283 { 0x1100f0, 0x1fe0 }, /* NON_Q_REGS */ \
1284 { 0x7f, 0x1fe0 }, /* INDEX_REGS */ \
1285 { 0x1100ff, 0x0 }, /* LEGACY_REGS */ \
1286 { 0x1100ff, 0x1fe0 }, /* GENERAL_REGS */ \
1287 { 0x100, 0x0 }, { 0x0200, 0x0 },/* FP_TOP_REG, FP_SECOND_REG */\
1288 { 0xff00, 0x0 }, /* FLOAT_REGS */ \
1289 { 0x1fe00000,0x1fe000 }, /* SSE_REGS */ \
1290 { 0xe0000000, 0x1f }, /* MMX_REGS */ \
1291 { 0x1fe00100,0x1fe000 }, /* FP_TOP_SSE_REG */ \
1292 { 0x1fe00200,0x1fe000 }, /* FP_SECOND_SSE_REG */ \
1293 { 0x1fe0ff00,0x3fe000 }, /* FLOAT_SSE_REGS */ \
1294 { 0x1ffff, 0x1fe0 }, /* FLOAT_INT_REGS */ \
1295 { 0x1fe100ff,0x1fffe0 }, /* INT_SSE_REGS */ \
1296 { 0x1fe1ffff,0x1fffe0 }, /* FLOAT_INT_SSE_REGS */ \
1297 { 0xffffffff,0x1fffff } \
1300 /* The same information, inverted:
1301 Return the class number of the smallest class containing
1302 reg number REGNO. This could be a conditional expression
1303 or could index an array. */
1305 #define REGNO_REG_CLASS(REGNO) (regclass_map[REGNO])
1307 /* When defined, the compiler allows registers explicitly used in the
1308 rtl to be used as spill registers but prevents the compiler from
1309 extending the lifetime of these registers. */
1311 #define SMALL_REGISTER_CLASSES 1
1313 #define QI_REG_P(X) (REG_P (X) && REGNO (X) < 4)
1315 #define GENERAL_REGNO_P(N) \
1316 ((N) <= STACK_POINTER_REGNUM || REX_INT_REGNO_P (N))
1318 #define GENERAL_REG_P(X) \
1319 (REG_P (X) && GENERAL_REGNO_P (REGNO (X)))
1321 #define ANY_QI_REG_P(X) (TARGET_64BIT ? GENERAL_REG_P(X) : QI_REG_P (X))
1323 #define REX_INT_REGNO_P(N) \
1324 IN_RANGE ((N), FIRST_REX_INT_REG, LAST_REX_INT_REG)
1325 #define REX_INT_REG_P(X) (REG_P (X) && REX_INT_REGNO_P (REGNO (X)))
1327 #define FP_REG_P(X) (REG_P (X) && FP_REGNO_P (REGNO (X)))
1328 #define FP_REGNO_P(N) IN_RANGE ((N), FIRST_STACK_REG, LAST_STACK_REG)
1329 #define ANY_FP_REG_P(X) (REG_P (X) && ANY_FP_REGNO_P (REGNO (X)))
1330 #define ANY_FP_REGNO_P(N) (FP_REGNO_P (N) || SSE_REGNO_P (N))
1332 #define SSE_REG_P(N) (REG_P (N) && SSE_REGNO_P (REGNO (N)))
1333 #define SSE_REGNO_P(N) \
1334 (IN_RANGE ((N), FIRST_SSE_REG, LAST_SSE_REG) \
1335 || REX_SSE_REGNO_P (N))
1337 #define REX_SSE_REGNO_P(N) \
1338 IN_RANGE ((N), FIRST_REX_SSE_REG, LAST_REX_SSE_REG)
1340 #define SSE_REGNO(N) \
1341 ((N) < 8 ? FIRST_SSE_REG + (N) : FIRST_REX_SSE_REG + (N) - 8)
1343 #define SSE_FLOAT_MODE_P(MODE) \
1344 ((TARGET_SSE && (MODE) == SFmode) || (TARGET_SSE2 && (MODE) == DFmode))
1346 #define MMX_REG_P(XOP) (REG_P (XOP) && MMX_REGNO_P (REGNO (XOP)))
1347 #define MMX_REGNO_P(N) IN_RANGE ((N), FIRST_MMX_REG, LAST_MMX_REG)
1349 #define STACK_REG_P(XOP) (REG_P (XOP) && STACK_REGNO_P (REGNO (XOP)))
1350 #define STACK_REGNO_P(N) IN_RANGE ((N), FIRST_STACK_REG, LAST_STACK_REG)
1352 #define STACK_TOP_P(XOP) (REG_P (XOP) && REGNO (XOP) == FIRST_STACK_REG)
1354 #define CC_REG_P(X) (REG_P (X) && CC_REGNO_P (REGNO (X)))
1355 #define CC_REGNO_P(X) ((X) == FLAGS_REG || (X) == FPSR_REG)
1357 /* The class value for index registers, and the one for base regs. */
1359 #define INDEX_REG_CLASS INDEX_REGS
1360 #define BASE_REG_CLASS GENERAL_REGS
1362 /* Place additional restrictions on the register class to use when it
1363 is necessary to be able to hold a value of mode MODE in a reload
1364 register for which class CLASS would ordinarily be used. */
1366 #define LIMIT_RELOAD_CLASS(MODE, CLASS) \
1367 ((MODE) == QImode && !TARGET_64BIT \
1368 && ((CLASS) == ALL_REGS || (CLASS) == GENERAL_REGS \
1369 || (CLASS) == LEGACY_REGS || (CLASS) == INDEX_REGS) \
1372 /* Given an rtx X being reloaded into a reg required to be
1373 in class CLASS, return the class of reg to actually use.
1374 In general this is just CLASS; but on some machines
1375 in some cases it is preferable to use a more restrictive class.
1376 On the 80386 series, we prevent floating constants from being
1377 reloaded into floating registers (since no move-insn can do that)
1378 and we ensure that QImodes aren't reloaded into the esi or edi reg. */
1380 /* Put float CONST_DOUBLE in the constant pool instead of fp regs.
1381 QImode must go into class Q_REGS.
1382 Narrow ALL_REGS to GENERAL_REGS. This supports allowing movsf and
1383 movdf to do mem-to-mem moves through integer regs. */
1385 #define PREFERRED_RELOAD_CLASS(X, CLASS) \
1386 ix86_preferred_reload_class ((X), (CLASS))
1388 /* Discourage putting floating-point values in SSE registers unless
1389 SSE math is being used, and likewise for the 387 registers. */
1391 #define PREFERRED_OUTPUT_RELOAD_CLASS(X, CLASS) \
1392 ix86_preferred_output_reload_class ((X), (CLASS))
1394 /* If we are copying between general and FP registers, we need a memory
1395 location. The same is true for SSE and MMX registers. */
1396 #define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
1397 ix86_secondary_memory_needed ((CLASS1), (CLASS2), (MODE), 1)
1399 /* QImode spills from non-QI registers need a scratch. This does not
1400 happen often -- the only example so far requires an uninitialized
1403 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, OUT) \
1404 (((CLASS) == GENERAL_REGS || (CLASS) == LEGACY_REGS \
1405 || (CLASS) == INDEX_REGS) && !TARGET_64BIT && (MODE) == QImode \
1408 /* Return the maximum number of consecutive registers
1409 needed to represent mode MODE in a register of class CLASS. */
1410 /* On the 80386, this is the size of MODE in words,
1411 except in the FP regs, where a single reg is always enough. */
1412 #define CLASS_MAX_NREGS(CLASS, MODE) \
1413 (!MAYBE_INTEGER_CLASS_P (CLASS) \
1414 ? (COMPLEX_MODE_P (MODE) ? 2 : 1) \
1415 : (((((MODE) == XFmode ? 12 : GET_MODE_SIZE (MODE))) \
1416 + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
1418 /* A C expression whose value is nonzero if pseudos that have been
1419 assigned to registers of class CLASS would likely be spilled
1420 because registers of CLASS are needed for spill registers.
1422 The default value of this macro returns 1 if CLASS has exactly one
1423 register and zero otherwise. On most machines, this default
1424 should be used. Only define this macro to some other expression
1425 if pseudo allocated by `local-alloc.c' end up in memory because
1426 their hard registers were needed for spill registers. If this
1427 macro returns nonzero for those classes, those pseudos will only
1428 be allocated by `global.c', which knows how to reallocate the
1429 pseudo to another register. If there would not be another
1430 register available for reallocation, you should not change the
1431 definition of this macro since the only effect of such a
1432 definition would be to slow down register allocation. */
1434 #define CLASS_LIKELY_SPILLED_P(CLASS) \
1435 (((CLASS) == AREG) \
1436 || ((CLASS) == DREG) \
1437 || ((CLASS) == CREG) \
1438 || ((CLASS) == BREG) \
1439 || ((CLASS) == AD_REGS) \
1440 || ((CLASS) == SIREG) \
1441 || ((CLASS) == DIREG) \
1442 || ((CLASS) == FP_TOP_REG) \
1443 || ((CLASS) == FP_SECOND_REG))
1445 /* Return a class of registers that cannot change FROM mode to TO mode. */
1447 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
1448 ix86_cannot_change_mode_class (FROM, TO, CLASS)
1450 /* Stack layout; function entry, exit and calling. */
1452 /* Define this if pushing a word on the stack
1453 makes the stack pointer a smaller address. */
1454 #define STACK_GROWS_DOWNWARD
1456 /* Define this to nonzero if the nominal address of the stack frame
1457 is at the high-address end of the local variables;
1458 that is, each additional local variable allocated
1459 goes at a more negative offset in the frame. */
1460 #define FRAME_GROWS_DOWNWARD 1
1462 /* Offset within stack frame to start allocating local variables at.
1463 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
1464 first local allocated. Otherwise, it is the offset to the BEGINNING
1465 of the first local allocated. */
1466 #define STARTING_FRAME_OFFSET 0
1468 /* If we generate an insn to push BYTES bytes,
1469 this says how many the stack pointer really advances by.
1470 On 386, we have pushw instruction that decrements by exactly 2 no
1471 matter what the position was, there is no pushb.
1472 But as CIE data alignment factor on this arch is -4, we need to make
1473 sure all stack pointer adjustments are in multiple of 4.
1475 For 64bit ABI we round up to 8 bytes.
1478 #define PUSH_ROUNDING(BYTES) \
1480 ? (((BYTES) + 7) & (-8)) \
1481 : (((BYTES) + 3) & (-4)))
1483 /* If defined, the maximum amount of space required for outgoing arguments will
1484 be computed and placed into the variable
1485 `current_function_outgoing_args_size'. No space will be pushed onto the
1486 stack for each call; instead, the function prologue should increase the stack
1487 frame size by this amount. */
1489 #define ACCUMULATE_OUTGOING_ARGS TARGET_ACCUMULATE_OUTGOING_ARGS
1491 /* If defined, a C expression whose value is nonzero when we want to use PUSH
1492 instructions to pass outgoing arguments. */
1494 #define PUSH_ARGS (TARGET_PUSH_ARGS && !ACCUMULATE_OUTGOING_ARGS)
1496 /* We want the stack and args grow in opposite directions, even if
1498 #define PUSH_ARGS_REVERSED 1
1500 /* Offset of first parameter from the argument pointer register value. */
1501 #define FIRST_PARM_OFFSET(FNDECL) 0
1503 /* Define this macro if functions should assume that stack space has been
1504 allocated for arguments even when their values are passed in registers.
1506 The value of this macro is the size, in bytes, of the area reserved for
1507 arguments passed in registers for the function represented by FNDECL.
1509 This space can be allocated by the caller, or be a part of the
1510 machine-dependent stack frame: `OUTGOING_REG_PARM_STACK_SPACE' says
1512 #define REG_PARM_STACK_SPACE(FNDECL) 0
1514 /* Value is the number of bytes of arguments automatically
1515 popped when returning from a subroutine call.
1516 FUNDECL is the declaration node of the function (as a tree),
1517 FUNTYPE is the data type of the function (as a tree),
1518 or for a library call it is an identifier node for the subroutine name.
1519 SIZE is the number of bytes of arguments passed on the stack.
1521 On the 80386, the RTD insn may be used to pop them if the number
1522 of args is fixed, but if the number is variable then the caller
1523 must pop them all. RTD can't be used for library calls now
1524 because the library is compiled with the Unix compiler.
1525 Use of RTD is a selectable option, since it is incompatible with
1526 standard Unix calling sequences. If the option is not selected,
1527 the caller must always pop the args.
1529 The attribute stdcall is equivalent to RTD on a per module basis. */
1531 #define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, SIZE) \
1532 ix86_return_pops_args ((FUNDECL), (FUNTYPE), (SIZE))
1534 #define FUNCTION_VALUE_REGNO_P(N) \
1535 ix86_function_value_regno_p (N)
1537 /* Define how to find the value returned by a library function
1538 assuming the value has mode MODE. */
1540 #define LIBCALL_VALUE(MODE) \
1541 ix86_libcall_value (MODE)
1543 /* Define the size of the result block used for communication between
1544 untyped_call and untyped_return. The block contains a DImode value
1545 followed by the block used by fnsave and frstor. */
1547 #define APPLY_RESULT_SIZE (8+108)
1549 /* 1 if N is a possible register number for function argument passing. */
1550 #define FUNCTION_ARG_REGNO_P(N) ix86_function_arg_regno_p (N)
1552 /* Define a data type for recording info about an argument list
1553 during the scan of that argument list. This data type should
1554 hold all necessary information about the function itself
1555 and about the args processed so far, enough to enable macros
1556 such as FUNCTION_ARG to determine where the next arg should go. */
1558 typedef struct ix86_args {
1559 int words; /* # words passed so far */
1560 int nregs; /* # registers available for passing */
1561 int regno; /* next available register number */
1562 int fastcall; /* fastcall calling convention is used */
1563 int sse_words; /* # sse words passed so far */
1564 int sse_nregs; /* # sse registers available for passing */
1565 int warn_sse; /* True when we want to warn about SSE ABI. */
1566 int warn_mmx; /* True when we want to warn about MMX ABI. */
1567 int sse_regno; /* next available sse register number */
1568 int mmx_words; /* # mmx words passed so far */
1569 int mmx_nregs; /* # mmx registers available for passing */
1570 int mmx_regno; /* next available mmx register number */
1571 int maybe_vaarg; /* true for calls to possibly vardic fncts. */
1572 int float_in_sse; /* 1 if in 32-bit mode SFmode (2 for DFmode) should
1573 be passed in SSE registers. Otherwise 0. */
1576 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1577 for a call to a function whose data type is FNTYPE.
1578 For a library call, FNTYPE is 0. */
1580 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
1581 init_cumulative_args (&(CUM), (FNTYPE), (LIBNAME), (FNDECL))
1583 /* Update the data in CUM to advance over an argument
1584 of mode MODE and data type TYPE.
1585 (TYPE is null for libcalls where that information may not be available.) */
1587 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1588 function_arg_advance (&(CUM), (MODE), (TYPE), (NAMED))
1590 /* Define where to put the arguments to a function.
1591 Value is zero to push the argument on the stack,
1592 or a hard register in which to store the argument.
1594 MODE is the argument's machine mode.
1595 TYPE is the data type of the argument (as a tree).
1596 This is null for libcalls where that information may
1598 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1599 the preceding args and about the function being called.
1600 NAMED is nonzero if this argument is a named parameter
1601 (otherwise it is an extra parameter matching an ellipsis). */
1603 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1604 function_arg (&(CUM), (MODE), (TYPE), (NAMED))
1606 /* Implement `va_start' for varargs and stdarg. */
1607 #define EXPAND_BUILTIN_VA_START(VALIST, NEXTARG) \
1608 ix86_va_start (VALIST, NEXTARG)
1610 #define TARGET_ASM_FILE_END ix86_file_end
1611 #define NEED_INDICATE_EXEC_STACK 0
1613 /* Output assembler code to FILE to increment profiler label # LABELNO
1614 for profiling a function entry. */
1616 #define FUNCTION_PROFILER(FILE, LABELNO) x86_function_profiler (FILE, LABELNO)
1618 #define MCOUNT_NAME "_mcount"
1620 #define PROFILE_COUNT_REGISTER "edx"
1622 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1623 the stack pointer does not matter. The value is tested only in
1624 functions that have frame pointers.
1625 No definition is equivalent to always zero. */
1626 /* Note on the 386 it might be more efficient not to define this since
1627 we have to restore it ourselves from the frame pointer, in order to
1630 #define EXIT_IGNORE_STACK 1
1632 /* Output assembler code for a block containing the constant parts
1633 of a trampoline, leaving space for the variable parts. */
1635 /* On the 386, the trampoline contains two instructions:
1638 The trampoline is generated entirely at runtime. The operand of JMP
1639 is the address of FUNCTION relative to the instruction following the
1640 JMP (which is 5 bytes long). */
1642 /* Length in units of the trampoline for entering a nested function. */
1644 #define TRAMPOLINE_SIZE (TARGET_64BIT ? 23 : 10)
1646 /* Emit RTL insns to initialize the variable parts of a trampoline.
1647 FNADDR is an RTX for the address of the function's pure code.
1648 CXT is an RTX for the static chain value for the function. */
1650 #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
1651 x86_initialize_trampoline ((TRAMP), (FNADDR), (CXT))
1653 /* Definitions for register eliminations.
1655 This is an array of structures. Each structure initializes one pair
1656 of eliminable registers. The "from" register number is given first,
1657 followed by "to". Eliminations of the same "from" register are listed
1658 in order of preference.
1660 There are two registers that can always be eliminated on the i386.
1661 The frame pointer and the arg pointer can be replaced by either the
1662 hard frame pointer or to the stack pointer, depending upon the
1663 circumstances. The hard frame pointer is not used before reload and
1664 so it is not eligible for elimination. */
1666 #define ELIMINABLE_REGS \
1667 {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1668 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
1669 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1670 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}} \
1672 /* Given FROM and TO register numbers, say whether this elimination is
1673 allowed. Frame pointer elimination is automatically handled.
1675 All other eliminations are valid. */
1677 #define CAN_ELIMINATE(FROM, TO) \
1678 ((TO) == STACK_POINTER_REGNUM ? ! frame_pointer_needed : 1)
1680 /* Define the offset between two registers, one to be eliminated, and the other
1681 its replacement, at the start of a routine. */
1683 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1684 ((OFFSET) = ix86_initial_elimination_offset ((FROM), (TO)))
1686 /* Addressing modes, and classification of registers for them. */
1688 /* Macros to check register numbers against specific register classes. */
1690 /* These assume that REGNO is a hard or pseudo reg number.
1691 They give nonzero only if REGNO is a hard reg of the suitable class
1692 or a pseudo reg currently allocated to a suitable hard reg.
1693 Since they use reg_renumber, they are safe only once reg_renumber
1694 has been allocated, which happens in local-alloc.c. */
1696 #define REGNO_OK_FOR_INDEX_P(REGNO) \
1697 ((REGNO) < STACK_POINTER_REGNUM \
1698 || REX_INT_REGNO_P (REGNO) \
1699 || (unsigned) reg_renumber[(REGNO)] < STACK_POINTER_REGNUM \
1700 || REX_INT_REGNO_P ((unsigned) reg_renumber[(REGNO)]))
1702 #define REGNO_OK_FOR_BASE_P(REGNO) \
1703 (GENERAL_REGNO_P (REGNO) \
1704 || (REGNO) == ARG_POINTER_REGNUM \
1705 || (REGNO) == FRAME_POINTER_REGNUM \
1706 || GENERAL_REGNO_P ((unsigned) reg_renumber[(REGNO)]))
1708 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
1709 and check its validity for a certain class.
1710 We have two alternate definitions for each of them.
1711 The usual definition accepts all pseudo regs; the other rejects
1712 them unless they have been allocated suitable hard regs.
1713 The symbol REG_OK_STRICT causes the latter definition to be used.
1715 Most source files want to accept pseudo regs in the hope that
1716 they will get allocated to the class that the insn wants them to be in.
1717 Source files for reload pass need to be strict.
1718 After reload, it makes no difference, since pseudo regs have
1719 been eliminated by then. */
1722 /* Non strict versions, pseudos are ok. */
1723 #define REG_OK_FOR_INDEX_NONSTRICT_P(X) \
1724 (REGNO (X) < STACK_POINTER_REGNUM \
1725 || REX_INT_REGNO_P (REGNO (X)) \
1726 || REGNO (X) >= FIRST_PSEUDO_REGISTER)
1728 #define REG_OK_FOR_BASE_NONSTRICT_P(X) \
1729 (GENERAL_REGNO_P (REGNO (X)) \
1730 || REGNO (X) == ARG_POINTER_REGNUM \
1731 || REGNO (X) == FRAME_POINTER_REGNUM \
1732 || REGNO (X) >= FIRST_PSEUDO_REGISTER)
1734 /* Strict versions, hard registers only */
1735 #define REG_OK_FOR_INDEX_STRICT_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
1736 #define REG_OK_FOR_BASE_STRICT_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
1738 #ifndef REG_OK_STRICT
1739 #define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_INDEX_NONSTRICT_P (X)
1740 #define REG_OK_FOR_BASE_P(X) REG_OK_FOR_BASE_NONSTRICT_P (X)
1743 #define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_INDEX_STRICT_P (X)
1744 #define REG_OK_FOR_BASE_P(X) REG_OK_FOR_BASE_STRICT_P (X)
1747 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
1748 that is a valid memory address for an instruction.
1749 The MODE argument is the machine mode for the MEM expression
1750 that wants to use this address.
1752 The other macros defined here are used only in GO_IF_LEGITIMATE_ADDRESS,
1753 except for CONSTANT_ADDRESS_P which is usually machine-independent.
1755 See legitimize_pic_address in i386.c for details as to what
1756 constitutes a legitimate address when -fpic is used. */
1758 #define MAX_REGS_PER_ADDRESS 2
1760 #define CONSTANT_ADDRESS_P(X) constant_address_p (X)
1762 /* Nonzero if the constant value X is a legitimate general operand.
1763 It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE. */
1765 #define LEGITIMATE_CONSTANT_P(X) legitimate_constant_p (X)
1767 #ifdef REG_OK_STRICT
1768 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
1770 if (legitimate_address_p ((MODE), (X), 1)) \
1775 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
1777 if (legitimate_address_p ((MODE), (X), 0)) \
1783 /* If defined, a C expression to determine the base term of address X.
1784 This macro is used in only one place: `find_base_term' in alias.c.
1786 It is always safe for this macro to not be defined. It exists so
1787 that alias analysis can understand machine-dependent addresses.
1789 The typical use of this macro is to handle addresses containing
1790 a label_ref or symbol_ref within an UNSPEC. */
1792 #define FIND_BASE_TERM(X) ix86_find_base_term (X)
1794 /* Try machine-dependent ways of modifying an illegitimate address
1795 to be legitimate. If we find one, return the new, valid address.
1796 This macro is used in only one place: `memory_address' in explow.c.
1798 OLDX is the address as it was before break_out_memory_refs was called.
1799 In some cases it is useful to look at this to decide what needs to be done.
1801 MODE and WIN are passed so that this macro can use
1802 GO_IF_LEGITIMATE_ADDRESS.
1804 It is always safe for this macro to do nothing. It exists to recognize
1805 opportunities to optimize the output.
1807 For the 80386, we handle X+REG by loading X into a register R and
1808 using R+REG. R will go in a general reg and indexing will be used.
1809 However, if REG is a broken-out memory address or multiplication,
1810 nothing needs to be done because REG can certainly go in a general reg.
1812 When -fpic is used, special handling is needed for symbolic references.
1813 See comments by legitimize_pic_address in i386.c for details. */
1815 #define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
1817 (X) = legitimize_address ((X), (OLDX), (MODE)); \
1818 if (memory_address_p ((MODE), (X))) \
1822 /* Nonzero if the constant value X is a legitimate general operand
1823 when generating PIC code. It is given that flag_pic is on and
1824 that X satisfies CONSTANT_P or is a CONST_DOUBLE. */
1826 #define LEGITIMATE_PIC_OPERAND_P(X) legitimate_pic_operand_p (X)
1828 #define SYMBOLIC_CONST(X) \
1829 (GET_CODE (X) == SYMBOL_REF \
1830 || GET_CODE (X) == LABEL_REF \
1831 || (GET_CODE (X) == CONST && symbolic_reference_mentioned_p (X)))
1833 /* Go to LABEL if ADDR (a legitimate address expression)
1834 has an effect that depends on the machine mode it is used for.
1835 On the 80386, only postdecrement and postincrement address depend thus
1836 (the amount of decrement or increment being the length of the operand).
1837 These are now caught in recog.c. */
1838 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL)
1840 /* Max number of args passed in registers. If this is more than 3, we will
1841 have problems with ebx (register #4), since it is a caller save register and
1842 is also used as the pic register in ELF. So for now, don't allow more than
1843 3 registers to be passed in registers. */
1845 #define REGPARM_MAX (TARGET_64BIT ? 6 : 3)
1847 #define SSE_REGPARM_MAX (TARGET_64BIT ? 8 : (TARGET_SSE ? 3 : 0))
1849 #define MMX_REGPARM_MAX (TARGET_64BIT ? 0 : (TARGET_MMX ? 3 : 0))
1852 /* Specify the machine mode that this machine uses
1853 for the index in the tablejump instruction. */
1854 #define CASE_VECTOR_MODE \
1855 (!TARGET_64BIT || (flag_pic && ix86_cmodel != CM_LARGE_PIC) ? SImode : DImode)
1857 /* Define this as 1 if `char' should by default be signed; else as 0. */
1858 #define DEFAULT_SIGNED_CHAR 1
1860 /* Max number of bytes we can move from memory to memory
1861 in one reasonably fast instruction. */
1864 /* MOVE_MAX_PIECES is the number of bytes at a time which we can
1865 move efficiently, as opposed to MOVE_MAX which is the maximum
1866 number of bytes we can move with a single instruction. */
1867 #define MOVE_MAX_PIECES (TARGET_64BIT ? 8 : 4)
1869 /* If a memory-to-memory move would take MOVE_RATIO or more simple
1870 move-instruction pairs, we will do a movmem or libcall instead.
1871 Increasing the value will always make code faster, but eventually
1872 incurs high cost in increased code size.
1874 If you don't define this, a reasonable default is used. */
1876 #define MOVE_RATIO (optimize_size ? 3 : ix86_cost->move_ratio)
1878 /* If a clear memory operation would take CLEAR_RATIO or more simple
1879 move-instruction sequences, we will do a clrmem or libcall instead. */
1881 #define CLEAR_RATIO (optimize_size ? 2 \
1882 : ix86_cost->move_ratio > 6 ? 6 : ix86_cost->move_ratio)
1884 /* Define if shifts truncate the shift count
1885 which implies one can omit a sign-extension or zero-extension
1886 of a shift count. */
1887 /* On i386, shifts do truncate the count. But bit opcodes don't. */
1889 /* #define SHIFT_COUNT_TRUNCATED */
1891 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
1892 is done just by pretending it is already truncated. */
1893 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
1895 /* A macro to update M and UNSIGNEDP when an object whose type is
1896 TYPE and which has the specified mode and signedness is to be
1897 stored in a register. This macro is only called when TYPE is a
1900 On i386 it is sometimes useful to promote HImode and QImode
1901 quantities to SImode. The choice depends on target type. */
1903 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
1905 if (((MODE) == HImode && TARGET_PROMOTE_HI_REGS) \
1906 || ((MODE) == QImode && TARGET_PROMOTE_QI_REGS)) \
1910 /* Specify the machine mode that pointers have.
1911 After generation of rtl, the compiler makes no further distinction
1912 between pointers and any other objects of this machine mode. */
1913 #define Pmode (TARGET_64BIT ? DImode : SImode)
1915 /* A function address in a call instruction
1916 is a byte address (for indexing purposes)
1917 so give the MEM rtx a byte's mode. */
1918 #define FUNCTION_MODE QImode
1920 /* A C expression for the cost of moving data from a register in class FROM to
1921 one in class TO. The classes are expressed using the enumeration values
1922 such as `GENERAL_REGS'. A value of 2 is the default; other values are
1923 interpreted relative to that.
1925 It is not required that the cost always equal 2 when FROM is the same as TO;
1926 on some machines it is expensive to move between registers if they are not
1927 general registers. */
1929 #define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2) \
1930 ix86_register_move_cost ((MODE), (CLASS1), (CLASS2))
1932 /* A C expression for the cost of moving data of mode M between a
1933 register and memory. A value of 2 is the default; this cost is
1934 relative to those in `REGISTER_MOVE_COST'.
1936 If moving between registers and memory is more expensive than
1937 between two registers, you should define this macro to express the
1940 #define MEMORY_MOVE_COST(MODE, CLASS, IN) \
1941 ix86_memory_move_cost ((MODE), (CLASS), (IN))
1943 /* A C expression for the cost of a branch instruction. A value of 1
1944 is the default; other values are interpreted relative to that. */
1946 #define BRANCH_COST ix86_branch_cost
1948 /* Define this macro as a C expression which is nonzero if accessing
1949 less than a word of memory (i.e. a `char' or a `short') is no
1950 faster than accessing a word of memory, i.e., if such access
1951 require more than one instruction or if there is no difference in
1952 cost between byte and (aligned) word loads.
1954 When this macro is not defined, the compiler will access a field by
1955 finding the smallest containing object; when it is defined, a
1956 fullword load will be used if alignment permits. Unless bytes
1957 accesses are faster than word accesses, using word accesses is
1958 preferable since it may eliminate subsequent memory access if
1959 subsequent accesses occur to other fields in the same word of the
1960 structure, but to different bytes. */
1962 #define SLOW_BYTE_ACCESS 0
1964 /* Nonzero if access to memory by shorts is slow and undesirable. */
1965 #define SLOW_SHORT_ACCESS 0
1967 /* Define this macro to be the value 1 if unaligned accesses have a
1968 cost many times greater than aligned accesses, for example if they
1969 are emulated in a trap handler.
1971 When this macro is nonzero, the compiler will act as if
1972 `STRICT_ALIGNMENT' were nonzero when generating code for block
1973 moves. This can cause significantly more instructions to be
1974 produced. Therefore, do not set this macro nonzero if unaligned
1975 accesses only add a cycle or two to the time for a memory access.
1977 If the value of this macro is always zero, it need not be defined. */
1979 /* #define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) 0 */
1981 /* Define this macro if it is as good or better to call a constant
1982 function address than to call an address kept in a register.
1984 Desirable on the 386 because a CALL with a constant address is
1985 faster than one with a register address. */
1987 #define NO_FUNCTION_CSE
1989 /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE,
1990 return the mode to be used for the comparison.
1992 For floating-point equality comparisons, CCFPEQmode should be used.
1993 VOIDmode should be used in all other cases.
1995 For integer comparisons against zero, reduce to CCNOmode or CCZmode if
1996 possible, to allow for more combinations. */
1998 #define SELECT_CC_MODE(OP, X, Y) ix86_cc_mode ((OP), (X), (Y))
2000 /* Return nonzero if MODE implies a floating point inequality can be
2003 #define REVERSIBLE_CC_MODE(MODE) 1
2005 /* A C expression whose value is reversed condition code of the CODE for
2006 comparison done in CC_MODE mode. */
2007 #define REVERSE_CONDITION(CODE, MODE) ix86_reverse_condition ((CODE), (MODE))
2010 /* Control the assembler format that we output, to the extent
2011 this does not vary between assemblers. */
2013 /* How to refer to registers in assembler output.
2014 This sequence is indexed by compiler's hard-register-number (see above). */
2016 /* In order to refer to the first 8 regs as 32-bit regs, prefix an "e".
2017 For non floating point regs, the following are the HImode names.
2019 For float regs, the stack top is sometimes referred to as "%st(0)"
2020 instead of just "%st". PRINT_OPERAND handles this with the "y" code. */
2022 #define HI_REGISTER_NAMES \
2023 {"ax","dx","cx","bx","si","di","bp","sp", \
2024 "st","st(1)","st(2)","st(3)","st(4)","st(5)","st(6)","st(7)", \
2025 "argp", "flags", "fpsr", "fpcr", "frame", \
2026 "xmm0","xmm1","xmm2","xmm3","xmm4","xmm5","xmm6","xmm7", \
2027 "mm0", "mm1", "mm2", "mm3", "mm4", "mm5", "mm6", "mm7", \
2028 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
2029 "xmm8", "xmm9", "xmm10", "xmm11", "xmm12", "xmm13", "xmm14", "xmm15"}
2031 #define REGISTER_NAMES HI_REGISTER_NAMES
2033 /* Table of additional register names to use in user input. */
2035 #define ADDITIONAL_REGISTER_NAMES \
2036 { { "eax", 0 }, { "edx", 1 }, { "ecx", 2 }, { "ebx", 3 }, \
2037 { "esi", 4 }, { "edi", 5 }, { "ebp", 6 }, { "esp", 7 }, \
2038 { "rax", 0 }, { "rdx", 1 }, { "rcx", 2 }, { "rbx", 3 }, \
2039 { "rsi", 4 }, { "rdi", 5 }, { "rbp", 6 }, { "rsp", 7 }, \
2040 { "al", 0 }, { "dl", 1 }, { "cl", 2 }, { "bl", 3 }, \
2041 { "ah", 0 }, { "dh", 1 }, { "ch", 2 }, { "bh", 3 } }
2043 /* Note we are omitting these since currently I don't know how
2044 to get gcc to use these, since they want the same but different
2045 number as al, and ax.
2048 #define QI_REGISTER_NAMES \
2049 {"al", "dl", "cl", "bl", "sil", "dil", "bpl", "spl",}
2051 /* These parallel the array above, and can be used to access bits 8:15
2052 of regs 0 through 3. */
2054 #define QI_HIGH_REGISTER_NAMES \
2055 {"ah", "dh", "ch", "bh", }
2057 /* How to renumber registers for dbx and gdb. */
2059 #define DBX_REGISTER_NUMBER(N) \
2060 (TARGET_64BIT ? dbx64_register_map[(N)] : dbx_register_map[(N)])
2062 extern int const dbx_register_map[FIRST_PSEUDO_REGISTER];
2063 extern int const dbx64_register_map[FIRST_PSEUDO_REGISTER];
2064 extern int const svr4_dbx_register_map[FIRST_PSEUDO_REGISTER];
2066 /* Before the prologue, RA is at 0(%esp). */
2067 #define INCOMING_RETURN_ADDR_RTX \
2068 gen_rtx_MEM (VOIDmode, gen_rtx_REG (VOIDmode, STACK_POINTER_REGNUM))
2070 /* After the prologue, RA is at -4(AP) in the current frame. */
2071 #define RETURN_ADDR_RTX(COUNT, FRAME) \
2073 ? gen_rtx_MEM (Pmode, plus_constant (arg_pointer_rtx, -UNITS_PER_WORD)) \
2074 : gen_rtx_MEM (Pmode, plus_constant (FRAME, UNITS_PER_WORD)))
2076 /* PC is dbx register 8; let's use that column for RA. */
2077 #define DWARF_FRAME_RETURN_COLUMN (TARGET_64BIT ? 16 : 8)
2079 /* Before the prologue, the top of the frame is at 4(%esp). */
2080 #define INCOMING_FRAME_SP_OFFSET UNITS_PER_WORD
2082 /* Describe how we implement __builtin_eh_return. */
2083 #define EH_RETURN_DATA_REGNO(N) ((N) < 2 ? (N) : INVALID_REGNUM)
2084 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 2)
2087 /* Select a format to encode pointers in exception handling data. CODE
2088 is 0 for data, 1 for code labels, 2 for function pointers. GLOBAL is
2089 true if the symbol may be affected by dynamic relocations.
2091 ??? All x86 object file formats are capable of representing this.
2092 After all, the relocation needed is the same as for the call insn.
2093 Whether or not a particular assembler allows us to enter such, I
2094 guess we'll have to see. */
2095 #define ASM_PREFERRED_EH_DATA_FORMAT(CODE, GLOBAL) \
2096 asm_preferred_eh_data_format ((CODE), (GLOBAL))
2098 /* This is how to output an insn to push a register on the stack.
2099 It need not be very fast code. */
2101 #define ASM_OUTPUT_REG_PUSH(FILE, REGNO) \
2104 asm_fprintf ((FILE), "\tpush{q}\t%%r%s\n", \
2105 reg_names[(REGNO)] + (REX_INT_REGNO_P (REGNO) != 0)); \
2107 asm_fprintf ((FILE), "\tpush{l}\t%%e%s\n", reg_names[(REGNO)]); \
2110 /* This is how to output an insn to pop a register from the stack.
2111 It need not be very fast code. */
2113 #define ASM_OUTPUT_REG_POP(FILE, REGNO) \
2116 asm_fprintf ((FILE), "\tpop{q}\t%%r%s\n", \
2117 reg_names[(REGNO)] + (REX_INT_REGNO_P (REGNO) != 0)); \
2119 asm_fprintf ((FILE), "\tpop{l}\t%%e%s\n", reg_names[(REGNO)]); \
2122 /* This is how to output an element of a case-vector that is absolute. */
2124 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
2125 ix86_output_addr_vec_elt ((FILE), (VALUE))
2127 /* This is how to output an element of a case-vector that is relative. */
2129 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
2130 ix86_output_addr_diff_elt ((FILE), (VALUE), (REL))
2132 /* Under some conditions we need jump tables in the text section,
2133 because the assembler cannot handle label differences between
2134 sections. This is the case for x86_64 on Mach-O for example. */
2136 #define JUMP_TABLES_IN_TEXT_SECTION \
2137 (flag_pic && ((TARGET_MACHO && TARGET_64BIT) \
2138 || (!TARGET_64BIT && !HAVE_AS_GOTOFF_IN_DATA)))
2140 /* Switch to init or fini section via SECTION_OP, emit a call to FUNC,
2141 and switch back. For x86 we do this only to save a few bytes that
2142 would otherwise be unused in the text section. */
2143 #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
2144 asm (SECTION_OP "\n\t" \
2145 "call " USER_LABEL_PREFIX #FUNC "\n" \
2146 TEXT_SECTION_ASM_OP);
2148 /* Print operand X (an rtx) in assembler syntax to file FILE.
2149 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2150 Effect of various CODE letters is described in i386.c near
2151 print_operand function. */
2153 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
2154 ((CODE) == '*' || (CODE) == '+' || (CODE) == '&')
2156 #define PRINT_OPERAND(FILE, X, CODE) \
2157 print_operand ((FILE), (X), (CODE))
2159 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
2160 print_operand_address ((FILE), (ADDR))
2162 #define OUTPUT_ADDR_CONST_EXTRA(FILE, X, FAIL) \
2164 if (! output_addr_const_extra (FILE, (X))) \
2168 /* Which processor to schedule for. The cpu attribute defines a list that
2169 mirrors this list, so changes to i386.md must be made at the same time. */
2173 PROCESSOR_I386, /* 80386 */
2174 PROCESSOR_I486, /* 80486DX, 80486SX, 80486DX[24] */
2176 PROCESSOR_PENTIUMPRO,
2184 PROCESSOR_GENERIC32,
2185 PROCESSOR_GENERIC64,
2190 extern enum processor_type ix86_tune;
2191 extern enum processor_type ix86_arch;
2199 extern enum fpmath_unit ix86_fpmath;
2208 extern enum tls_dialect ix86_tls_dialect;
2211 CM_32, /* The traditional 32-bit ABI. */
2212 CM_SMALL, /* Assumes all code and data fits in the low 31 bits. */
2213 CM_KERNEL, /* Assumes all code and data fits in the high 31 bits. */
2214 CM_MEDIUM, /* Assumes code fits in the low 31 bits; data unlimited. */
2215 CM_LARGE, /* No assumptions. */
2216 CM_SMALL_PIC, /* Assumes code+data+got/plt fits in a 31 bit region. */
2217 CM_MEDIUM_PIC,/* Assumes code+got/plt fits in a 31 bit region. */
2218 CM_LARGE_PIC /* No assumptions. */
2221 extern enum cmodel ix86_cmodel;
2223 /* Size of the RED_ZONE area. */
2224 #define RED_ZONE_SIZE 128
2225 /* Reserved area of the red zone for temporaries. */
2226 #define RED_ZONE_RESERVE 8
2233 extern enum asm_dialect ix86_asm_dialect;
2234 extern unsigned int ix86_preferred_stack_boundary;
2235 extern int ix86_branch_cost, ix86_section_threshold;
2237 /* Smallest class containing REGNO. */
2238 extern enum reg_class const regclass_map[FIRST_PSEUDO_REGISTER];
2240 extern rtx ix86_compare_op0; /* operand 0 for comparisons */
2241 extern rtx ix86_compare_op1; /* operand 1 for comparisons */
2242 extern rtx ix86_compare_emitted;
2244 /* To properly truncate FP values into integers, we need to set i387 control
2245 word. We can't emit proper mode switching code before reload, as spills
2246 generated by reload may truncate values incorrectly, but we still can avoid
2247 redundant computation of new control word by the mode switching pass.
2248 The fldcw instructions are still emitted redundantly, but this is probably
2249 not going to be noticeable problem, as most CPUs do have fast path for
2252 The machinery is to emit simple truncation instructions and split them
2253 before reload to instructions having USEs of two memory locations that
2254 are filled by this code to old and new control word.
2256 Post-reload pass may be later used to eliminate the redundant fildcw if
2268 enum ix86_stack_slot
2276 MAX_386_STACK_LOCALS
2279 /* Define this macro if the port needs extra instructions inserted
2280 for mode switching in an optimizing compilation. */
2282 #define OPTIMIZE_MODE_SWITCHING(ENTITY) \
2283 ix86_optimize_mode_switching[(ENTITY)]
2285 /* If you define `OPTIMIZE_MODE_SWITCHING', you have to define this as
2286 initializer for an array of integers. Each initializer element N
2287 refers to an entity that needs mode switching, and specifies the
2288 number of different modes that might need to be set for this
2289 entity. The position of the initializer in the initializer -
2290 starting counting at zero - determines the integer that is used to
2291 refer to the mode-switched entity in question. */
2293 #define NUM_MODES_FOR_MODE_SWITCHING \
2294 { I387_CW_ANY, I387_CW_ANY, I387_CW_ANY, I387_CW_ANY }
2296 /* ENTITY is an integer specifying a mode-switched entity. If
2297 `OPTIMIZE_MODE_SWITCHING' is defined, you must define this macro to
2298 return an integer value not larger than the corresponding element
2299 in `NUM_MODES_FOR_MODE_SWITCHING', to denote the mode that ENTITY
2300 must be switched into prior to the execution of INSN. */
2302 #define MODE_NEEDED(ENTITY, I) ix86_mode_needed ((ENTITY), (I))
2304 /* This macro specifies the order in which modes for ENTITY are
2305 processed. 0 is the highest priority. */
2307 #define MODE_PRIORITY_TO_MODE(ENTITY, N) (N)
2309 /* Generate one or more insns to set ENTITY to MODE. HARD_REG_LIVE
2310 is the set of hard registers live at the point where the insn(s)
2311 are to be inserted. */
2313 #define EMIT_MODE_SET(ENTITY, MODE, HARD_REGS_LIVE) \
2314 ((MODE) != I387_CW_ANY && (MODE) != I387_CW_UNINITIALIZED \
2315 ? emit_i387_cw_initialization (MODE), 0 \
2319 /* Avoid renaming of stack registers, as doing so in combination with
2320 scheduling just increases amount of live registers at time and in
2321 the turn amount of fxch instructions needed.
2323 ??? Maybe Pentium chips benefits from renaming, someone can try.... */
2325 #define HARD_REGNO_RENAME_OK(SRC, TARGET) \
2326 (! IN_RANGE ((SRC), FIRST_STACK_REG, LAST_STACK_REG))
2329 #define DLL_IMPORT_EXPORT_PREFIX '#'
2331 #define FASTCALL_PREFIX '@'
2333 struct machine_function GTY(())
2335 struct stack_local_entry *stack_locals;
2336 const char *some_ld_name;
2337 rtx force_align_arg_pointer;
2338 int save_varrargs_registers;
2339 int accesses_prev_frame;
2340 int optimize_mode_switching[MAX_386_ENTITIES];
2341 /* Set by ix86_compute_frame_layout and used by prologue/epilogue expander to
2342 determine the style used. */
2343 int use_fast_prologue_epilogue;
2344 /* Number of saved registers USE_FAST_PROLOGUE_EPILOGUE has been computed
2346 int use_fast_prologue_epilogue_nregs;
2347 /* If true, the current function needs the default PIC register, not
2348 an alternate register (on x86) and must not use the red zone (on
2349 x86_64), even if it's a leaf function. We don't want the
2350 function to be regarded as non-leaf because TLS calls need not
2351 affect register allocation. This flag is set when a TLS call
2352 instruction is expanded within a function, and never reset, even
2353 if all such instructions are optimized away. Use the
2354 ix86_current_function_calls_tls_descriptor macro for a better
2356 int tls_descriptor_call_expanded_p;
2359 #define ix86_stack_locals (cfun->machine->stack_locals)
2360 #define ix86_save_varrargs_registers (cfun->machine->save_varrargs_registers)
2361 #define ix86_optimize_mode_switching (cfun->machine->optimize_mode_switching)
2362 #define ix86_tls_descriptor_calls_expanded_in_cfun \
2363 (cfun->machine->tls_descriptor_call_expanded_p)
2364 /* Since tls_descriptor_call_expanded is not cleared, even if all TLS
2365 calls are optimized away, we try to detect cases in which it was
2366 optimized away. Since such instructions (use (reg REG_SP)), we can
2367 verify whether there's any such instruction live by testing that
2369 #define ix86_current_function_calls_tls_descriptor \
2370 (ix86_tls_descriptor_calls_expanded_in_cfun && regs_ever_live[SP_REG])
2372 /* Control behavior of x86_file_start. */
2373 #define X86_FILE_START_VERSION_DIRECTIVE false
2374 #define X86_FILE_START_FLTUSED false
2376 /* Flag to mark data that is in the large address area. */
2377 #define SYMBOL_FLAG_FAR_ADDR (SYMBOL_FLAG_MACH_DEP << 0)
2378 #define SYMBOL_REF_FAR_ADDR_P(X) \
2379 ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_FAR_ADDR) != 0)
OSDN Git Service
