1 /* Target macros for the FRV port of GCC.
2 Copyright (C) 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
3 Contributed by Red Hat Inc.
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify it
8 under the terms of the GNU General Public License as published
9 by the Free Software Foundation; either version 2, or (at your
10 option) any later version.
12 GCC is distributed in the hope that it will be useful, but WITHOUT
13 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
15 License for more details.
17 You should have received a copy of the GNU General Public License
18 along with GCC; see the file COPYING. If not, write to the Free
19 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
25 /* Set up System V.4 (aka ELF) defaults. */
29 /* Frv general purpose macros. */
30 /* Align an address. */
31 #define ADDR_ALIGN(addr,align) (((addr) + (align) - 1) & ~((align) - 1))
33 /* Return true if a value is inside a range. */
34 #define IN_RANGE_P(VALUE, LOW, HIGH) \
35 ( (((HOST_WIDE_INT)(VALUE)) >= (HOST_WIDE_INT)(LOW)) \
36 && (((HOST_WIDE_INT)(VALUE)) <= ((HOST_WIDE_INT)(HIGH))))
39 /* Driver configuration. */
41 /* A C expression which determines whether the option `-CHAR' takes arguments.
42 The value should be the number of arguments that option takes-zero, for many
45 By default, this macro is defined to handle the standard options properly.
46 You need not define it unless you wish to add additional options which take
50 #undef SWITCH_TAKES_ARG
51 #define SWITCH_TAKES_ARG(CHAR) \
52 (DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G')
54 /* A C expression which determines whether the option `-NAME' takes arguments.
55 The value should be the number of arguments that option takes-zero, for many
56 options. This macro rather than `SWITCH_TAKES_ARG' is used for
57 multi-character option names.
59 By default, this macro is defined as `DEFAULT_WORD_SWITCH_TAKES_ARG', which
60 handles the standard options properly. You need not define
61 `WORD_SWITCH_TAKES_ARG' unless you wish to add additional options which take
62 arguments. Any redefinition should call `DEFAULT_WORD_SWITCH_TAKES_ARG' and
63 then check for additional options.
66 #undef WORD_SWITCH_TAKES_ARG
68 /* A C string constant that tells the GNU CC driver program options to pass to
69 the assembler. It can also specify how to translate options you give to GNU
70 CC into options for GNU CC to pass to the assembler. See the file `sun3.h'
71 for an example of this.
73 Do not define this macro if it does not need to do anything.
78 %{G*} %{v} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*} \
83 %{msoft-float} %{mhard-float} \
84 %{mdword} %{mno-dword} \
85 %{mdouble} %{mno-double} \
86 %{mmedia} %{mno-media} \
87 %{mmuladd} %{mno-muladd} \
88 %{mpack} %{mno-pack} \
89 %{fpic: -mpic} %{fPIC: -mPIC} %{mlibrary-pic}}"
91 /* Another C string constant used much like `LINK_SPEC'. The difference
92 between the two is that `STARTFILE_SPEC' is used at the very beginning of
93 the command given to the linker.
95 If this macro is not defined, a default is provided that loads the standard
96 C startup file from the usual place. See `gcc.c'.
100 #define STARTFILE_SPEC "crt0%O%s frvbegin%O%s"
102 /* Another C string constant used much like `LINK_SPEC'. The difference
103 between the two is that `ENDFILE_SPEC' is used at the very end of the
104 command given to the linker.
106 Do not define this macro if it does not need to do anything.
108 Defined in svr4.h. */
110 #define ENDFILE_SPEC "frvend%O%s"
112 /* A C string constant that tells the GNU CC driver program options to pass to
113 CPP. It can also specify how to translate options you give to GNU CC into
114 options for GNU CC to pass to the CPP.
116 Do not define this macro if it does not need to do anything. */
118 /* The idea here is to use the -mcpu option to define macros based on the
119 processor's features, using the features of the default processor if
120 no -mcpu option is given. These macros can then be overridden by
123 %{mcpu=frv: %(cpp_frv)} \
124 %{mcpu=fr500: %(cpp_fr500)} \
125 %{mcpu=fr400: %(cpp_fr400)} \
126 %{mcpu=fr300: %(cpp_simple)} \
127 %{mcpu=tomcat: %(cpp_fr500)} \
128 %{mcpu=simple: %(cpp_simple)} \
129 %{!mcpu*: %(cpp_cpu_default)} \
130 %{mno-media: -D__FRV_ACC__=0 %{msoft-float: -D__FRV_FPR__=0}} \
131 %{mhard-float: -D__FRV_HARD_FLOAT__} \
132 %{msoft-float: -U__FRV_HARD_FLOAT__} \
133 %{mgpr-32: -U__FRV_GPR__ -D__FRV_GPR__=32} \
134 %{mgpr-64: -U__FRV_GPR__ -D__FRV_GPR__=64} \
135 %{mfpr-32: -U__FRV_FPR__ -D__FRV_FPR__=32} \
136 %{mfpr-64: -U__FRV_FPR__ -D__FRV_FPR__=64} \
137 %{macc-4: -U__FRV_ACC__ -D__FRV_ACC__=4} \
138 %{macc-8: -U__FRV_ACC__ -D__FRV_ACC__=8} \
139 %{mdword: -D__FRV_DWORD__} \
140 %{mno-dword: -U__FRV_DWORD__} \
141 %{mno-pack: -U__FRV_VLIW__} \
142 %{fleading-underscore: -D__FRV_UNDERSCORE__}"
144 /* CPU defaults. Each CPU has its own CPP spec that defines the default
145 macros for that CPU. Each CPU also has its own default target mask.
147 CPU GPRs FPRs ACCs FPU MulAdd ldd/std Issue rate
148 --- ---- ---- ---- --- ------ ------- ----------
149 FRV 64 64 8 double yes yes 4
150 FR500 64 64 8 single no yes 4
151 FR400 32 32 4 none no yes 2
152 Simple 32 0 0 none no no 1 */
155 #define CPP_FRV_SPEC "\
159 -D__FRV_HARD_FLOAT__ \
163 #define CPP_FR500_SPEC "\
167 -D__FRV_HARD_FLOAT__ \
171 #define CPP_FR400_SPEC "\
178 #define CPP_SIMPLE_SPEC "\
182 %{mmedia: -D__FRV_ACC__=8} \
183 %{mhard-float|mmedia: -D__FRV_FPR__=64}"
185 #define MASK_DEFAULT_FRV \
192 #define MASK_DEFAULT_FR500 \
193 (MASK_MEDIA | MASK_DWORD | MASK_PACK)
195 #define MASK_DEFAULT_FR400 \
204 #define MASK_DEFAULT_SIMPLE \
205 (MASK_GPR_32 | MASK_SOFT_FLOAT)
207 /* A C string constant that tells the GNU CC driver program options to pass to
208 `cc1'. It can also specify how to translate options you give to GNU CC into
209 options for GNU CC to pass to the `cc1'.
211 Do not define this macro if it does not need to do anything. */
212 /* For ABI compliance, we need to put bss data into the normal data section. */
213 #define CC1_SPEC "%{G*}"
215 /* A C string constant that tells the GNU CC driver program options to pass to
216 the linker. It can also specify how to translate options you give to GNU CC
217 into options for GNU CC to pass to the linker.
219 Do not define this macro if it does not need to do anything.
221 Defined in svr4.h. */
222 /* Override the svr4.h version with one that dispenses without the svr4
223 shared library options, notably -G. */
228 %{static:-dn -Bstatic} \
229 %{shared:-Bdynamic} \
230 %{symbolic:-Bsymbolic} \
235 /* Another C string constant used much like `LINK_SPEC'. The difference
236 between the two is that `LIB_SPEC' is used at the end of the command given
239 If this macro is not defined, a default is provided that loads the standard
240 C library from the usual place. See `gcc.c'.
242 Defined in svr4.h. */
245 #define LIB_SPEC "--start-group -lc -lsim --end-group"
247 /* This macro defines names of additional specifications to put in the specs
248 that can be used in various specifications like CC1_SPEC. Its definition
249 is an initializer with a subgrouping for each command option.
251 Each subgrouping contains a string constant, that defines the
252 specification name, and a string constant that used by the GNU CC driver
255 Do not define this macro if it does not need to do anything. */
257 #ifndef SUBTARGET_EXTRA_SPECS
258 #define SUBTARGET_EXTRA_SPECS
261 #define EXTRA_SPECS \
262 { "cpp_frv", CPP_FRV_SPEC }, \
263 { "cpp_fr500", CPP_FR500_SPEC }, \
264 { "cpp_fr400", CPP_FR400_SPEC }, \
265 { "cpp_simple", CPP_SIMPLE_SPEC }, \
266 { "cpp_cpu_default", CPP_CPU_DEFAULT_SPEC }, \
267 SUBTARGET_EXTRA_SPECS
269 #ifndef CPP_CPU_DEFAULT_SPEC
270 #define CPP_CPU_DEFAULT_SPEC CPP_FR500_SPEC
271 #define CPU_TYPE FRV_CPU_FR500
274 /* Allow us to easily change the default for -malloc-cc. */
275 #ifndef DEFAULT_NO_ALLOC_CC
276 #define MASK_DEFAULT_ALLOC_CC MASK_ALLOC_CC
278 #define MASK_DEFAULT_ALLOC_CC 0
281 /* Run-time target specifications */
283 #define TARGET_CPU_CPP_BUILTINS() \
286 builtin_define ("__frv__"); \
287 builtin_assert ("machine=frv"); \
292 /* This declaration should be present. */
293 extern int target_flags;
295 /* This series of macros is to allow compiler command arguments to enable or
296 disable the use of optional features of the target machine. For example,
297 one machine description serves both the 68000 and the 68020; a command
298 argument tells the compiler whether it should use 68020-only instructions or
299 not. This command argument works by means of a macro `TARGET_68020' that
300 tests a bit in `target_flags'.
302 Define a macro `TARGET_FEATURENAME' for each such option. Its definition
303 should test a bit in `target_flags'; for example:
305 #define TARGET_68020 (target_flags & 1)
307 One place where these macros are used is in the condition-expressions of
308 instruction patterns. Note how `TARGET_68020' appears frequently in the
309 68000 machine description file, `m68k.md'. Another place they are used is
310 in the definitions of the other macros in the `MACHINE.h' file. */
312 #define MASK_GPR_32 0x00000001 /* Limit gprs to 32 registers */
313 #define MASK_FPR_32 0x00000002 /* Limit fprs to 32 registers */
314 #define MASK_SOFT_FLOAT 0x00000004 /* Use software floating point */
315 #define MASK_ALLOC_CC 0x00000008 /* Dynamically allocate icc/fcc's */
316 #define MASK_DWORD 0x00000010 /* Change ABi to allow dbl word insns*/
317 #define MASK_DOUBLE 0x00000020 /* Use double precision instructions */
318 #define MASK_MEDIA 0x00000040 /* Use media instructions */
319 #define MASK_MULADD 0x00000080 /* Use multiply add/subtract insns */
320 #define MASK_LIBPIC 0x00000100 /* -fpic that can be linked w/o pic */
321 #define MASK_ACC_4 0x00000200 /* Only use four media accumulators */
322 #define MASK_PACK 0x00000400 /* Set to enable packed output */
324 /* put debug masks up high */
325 #define MASK_DEBUG_ARG 0x40000000 /* debug argument handling */
326 #define MASK_DEBUG_ADDR 0x20000000 /* debug go_if_legitimate_address */
327 #define MASK_DEBUG_STACK 0x10000000 /* debug stack frame */
328 #define MASK_DEBUG 0x08000000 /* general debugging switch */
329 #define MASK_DEBUG_LOC 0x04000000 /* optimize line # table */
330 #define MASK_DEBUG_COND_EXEC 0x02000000 /* debug cond exec code */
331 #define MASK_NO_COND_MOVE 0x01000000 /* disable conditional moves */
332 #define MASK_NO_SCC 0x00800000 /* disable set conditional codes */
333 #define MASK_NO_COND_EXEC 0x00400000 /* disable conditional execution */
334 #define MASK_NO_VLIW_BRANCH 0x00200000 /* disable repacking branches */
335 #define MASK_NO_MULTI_CE 0x00100000 /* disable multi-level cond exec */
336 #define MASK_NO_NESTED_CE 0x00080000 /* disable nested cond exec */
338 #define MASK_DEFAULT MASK_DEFAULT_ALLOC_CC
340 #define TARGET_GPR_32 ((target_flags & MASK_GPR_32) != 0)
341 #define TARGET_FPR_32 ((target_flags & MASK_FPR_32) != 0)
342 #define TARGET_SOFT_FLOAT ((target_flags & MASK_SOFT_FLOAT) != 0)
343 #define TARGET_ALLOC_CC ((target_flags & MASK_ALLOC_CC) != 0)
344 #define TARGET_DWORD ((target_flags & MASK_DWORD) != 0)
345 #define TARGET_DOUBLE ((target_flags & MASK_DOUBLE) != 0)
346 #define TARGET_MEDIA ((target_flags & MASK_MEDIA) != 0)
347 #define TARGET_MULADD ((target_flags & MASK_MULADD) != 0)
348 #define TARGET_LIBPIC ((target_flags & MASK_LIBPIC) != 0)
349 #define TARGET_ACC_4 ((target_flags & MASK_ACC_4) != 0)
350 #define TARGET_DEBUG_ARG ((target_flags & MASK_DEBUG_ARG) != 0)
351 #define TARGET_DEBUG_ADDR ((target_flags & MASK_DEBUG_ADDR) != 0)
352 #define TARGET_DEBUG_STACK ((target_flags & MASK_DEBUG_STACK) != 0)
353 #define TARGET_DEBUG ((target_flags & MASK_DEBUG) != 0)
354 #define TARGET_DEBUG_LOC ((target_flags & MASK_DEBUG_LOC) != 0)
355 #define TARGET_DEBUG_COND_EXEC ((target_flags & MASK_DEBUG_COND_EXEC) != 0)
356 #define TARGET_NO_COND_MOVE ((target_flags & MASK_NO_COND_MOVE) != 0)
357 #define TARGET_NO_SCC ((target_flags & MASK_NO_SCC) != 0)
358 #define TARGET_NO_COND_EXEC ((target_flags & MASK_NO_COND_EXEC) != 0)
359 #define TARGET_NO_VLIW_BRANCH ((target_flags & MASK_NO_VLIW_BRANCH) != 0)
360 #define TARGET_NO_MULTI_CE ((target_flags & MASK_NO_MULTI_CE) != 0)
361 #define TARGET_NO_NESTED_CE ((target_flags & MASK_NO_NESTED_CE) != 0)
362 #define TARGET_PACK ((target_flags & MASK_PACK) != 0)
364 #define TARGET_GPR_64 (! TARGET_GPR_32)
365 #define TARGET_FPR_64 (! TARGET_FPR_32)
366 #define TARGET_HARD_FLOAT (! TARGET_SOFT_FLOAT)
367 #define TARGET_FIXED_CC (! TARGET_ALLOC_CC)
368 #define TARGET_COND_MOVE (! TARGET_NO_COND_MOVE)
369 #define TARGET_SCC (! TARGET_NO_SCC)
370 #define TARGET_COND_EXEC (! TARGET_NO_COND_EXEC)
371 #define TARGET_VLIW_BRANCH (! TARGET_NO_VLIW_BRANCH)
372 #define TARGET_MULTI_CE (! TARGET_NO_MULTI_CE)
373 #define TARGET_NESTED_CE (! TARGET_NO_NESTED_CE)
374 #define TARGET_ACC_8 (! TARGET_ACC_4)
376 #define TARGET_HAS_FPRS (TARGET_HARD_FLOAT || TARGET_MEDIA)
378 #define NUM_GPRS (TARGET_GPR_32? 32 : 64)
379 #define NUM_FPRS (!TARGET_HAS_FPRS? 0 : TARGET_FPR_32? 32 : 64)
380 #define NUM_ACCS (!TARGET_MEDIA? 0 : TARGET_ACC_4? 4 : 8)
382 /* Macros to identify the blend of media instructions available. Revision 1
383 is the one found on the FR500. Revision 2 includes the changes made for
386 Treat the generic processor as a revision 1 machine for now, for
387 compatibility with earlier releases. */
389 #define TARGET_MEDIA_REV1 \
391 && (frv_cpu_type == FRV_CPU_GENERIC \
392 || frv_cpu_type == FRV_CPU_FR500))
394 #define TARGET_MEDIA_REV2 \
395 (TARGET_MEDIA && frv_cpu_type == FRV_CPU_FR400)
397 /* This macro defines names of command options to set and clear bits in
398 `target_flags'. Its definition is an initializer with a subgrouping for
401 Each subgrouping contains a string constant, that defines the option name,
402 a number, which contains the bits to set in `target_flags', and an optional
403 second string which is the textual description that will be displayed when
404 the user passes --help on the command line. If the number entry is negative
405 then the specified bits will be cleared instead of being set. If the second
406 string entry is present but empty, then no help information will be displayed
407 for that option, but it will not count as an undocumented option. The actual
408 option name, asseen on the command line is made by appending `-m' to the
411 One of the subgroupings should have a null string. The number in this
412 grouping is the default value for `target_flags'. Any target options act
413 starting with that value.
415 Here is an example which defines `-m68000' and `-m68020' with opposite
416 meanings, and picks the latter as the default:
418 #define TARGET_SWITCHES \
419 { { "68020", 1, ""}, \
420 { "68000", -1, "Compile for the m68000"}, \
423 This declaration must be present. */
425 #define TARGET_SWITCHES \
426 {{ "gpr-32", MASK_GPR_32, "Only use 32 gprs"}, \
427 { "gpr-64", -MASK_GPR_32, "Use 64 gprs"}, \
428 { "fpr-32", MASK_FPR_32, "Only use 32 fprs"}, \
429 { "fpr-64", -MASK_FPR_32, "Use 64 fprs"}, \
430 { "hard-float", -MASK_SOFT_FLOAT, "Use hardware floating point" },\
431 { "soft-float", MASK_SOFT_FLOAT, "Use software floating point" },\
432 { "alloc-cc", MASK_ALLOC_CC, "Dynamically allocate cc's" }, \
433 { "fixed-cc", -MASK_ALLOC_CC, "Just use icc0/fcc0" }, \
434 { "dword", MASK_DWORD, "Change ABI to allow double word insns" }, \
435 { "no-dword", -MASK_DWORD, "Do not use double word insns" }, \
436 { "double", MASK_DOUBLE, "Use fp double instructions" }, \
437 { "no-double", -MASK_DOUBLE, "Do not use fp double insns" }, \
438 { "media", MASK_MEDIA, "Use media instructions" }, \
439 { "no-media", -MASK_MEDIA, "Do not use media insns" }, \
440 { "muladd", MASK_MULADD, "Use multiply add/subtract instructions" }, \
441 { "no-muladd", -MASK_MULADD, "Do not use multiply add/subtract insns" }, \
442 { "library-pic", MASK_LIBPIC, "PIC support for building libraries" }, \
443 { "acc-4", MASK_ACC_4, "Use 4 media accumulators" }, \
444 { "acc-8", -MASK_ACC_4, "Use 8 media accumulators" }, \
445 { "pack", MASK_PACK, "Pack VLIW instructions" }, \
446 { "no-pack", -MASK_PACK, "Do not pack VLIW instructions" }, \
447 { "no-eflags", 0, "Do not mark ABI switches in e_flags" }, \
448 { "debug-arg", MASK_DEBUG_ARG, "Internal debug switch" }, \
449 { "debug-addr", MASK_DEBUG_ADDR, "Internal debug switch" }, \
450 { "debug-stack", MASK_DEBUG_STACK, "Internal debug switch" }, \
451 { "debug", MASK_DEBUG, "Internal debug switch" }, \
452 { "debug-cond-exec", MASK_DEBUG_COND_EXEC, "Internal debug switch" }, \
453 { "debug-loc", MASK_DEBUG_LOC, "Internal debug switch" }, \
454 { "cond-move", -MASK_NO_COND_MOVE, "Enable conditional moves" }, \
455 { "no-cond-move", MASK_NO_COND_MOVE, "Disable conditional moves" }, \
456 { "scc", -MASK_NO_SCC, "Enable setting gprs to the result of comparisons" }, \
457 { "no-scc", MASK_NO_SCC, "Disable setting gprs to the result of comparisons" }, \
458 { "cond-exec", -MASK_NO_COND_EXEC, "Enable conditional execution other than moves/scc" }, \
459 { "no-cond-exec", MASK_NO_COND_EXEC, "Disable conditional execution other than moves/scc" }, \
460 { "vliw-branch", -MASK_NO_VLIW_BRANCH, "Run pass to pack branches into VLIW insns" }, \
461 { "no-vliw-branch", MASK_NO_VLIW_BRANCH, "Do not run pass to pack branches into VLIW insns" }, \
462 { "multi-cond-exec", -MASK_NO_MULTI_CE, "Disable optimizing &&/|| in conditional execution" }, \
463 { "no-multi-cond-exec", MASK_NO_MULTI_CE, "Enable optimizing &&/|| in conditional execution" }, \
464 { "nested-cond-exec", -MASK_NO_NESTED_CE, "Enable nested conditional execution optimizations" }, \
465 { "no-nested-cond-exec" ,MASK_NO_NESTED_CE, "Disable nested conditional execution optimizations" }, \
466 { "tomcat-stats", 0, "Cause gas to print tomcat statistics" }, \
467 { "", MASK_DEFAULT, "" }} \
469 /* This macro is similar to `TARGET_SWITCHES' but defines names of command
470 options that have values. Its definition is an initializer with a
471 subgrouping for each command option.
473 Each subgrouping contains a string constant, that defines the fixed part of
474 the option name, the address of a variable, and an optional description string.
475 The variable, of type `char *', is set to the text following the fixed part of
476 the option as it is specified on the command line. The actual option name is
477 made by appending `-m' to the specified name.
479 Here is an example which defines `-mshort-data-NUMBER'. If the given option
480 is `-mshort-data-512', the variable `m88k_short_data' will be set to the
483 extern char *m88k_short_data;
484 #define TARGET_OPTIONS \
485 { { "short-data-", & m88k_short_data, \
486 "Specify the size of the short data section" } }
488 This declaration is optional. */
489 #define TARGET_OPTIONS \
491 { "cpu=", &frv_cpu_string, "Set cpu type" }, \
492 { "branch-cost=", &frv_branch_cost_string, "Internal debug switch" }, \
493 { "cond-exec-insns=", &frv_condexec_insns_str, "Internal debug switch" }, \
494 { "cond-exec-temps=", &frv_condexec_temps_str, "Internal debug switch" }, \
495 { "sched-lookahead=", &frv_sched_lookahead_str,"Internal debug switch" }, \
498 /* This macro is a C statement to print on `stderr' a string describing the
499 particular machine description choice. Every machine description should
500 define `TARGET_VERSION'. For example:
503 #define TARGET_VERSION \
504 fprintf (stderr, " (68k, Motorola syntax)");
506 #define TARGET_VERSION \
507 fprintf (stderr, " (68k, MIT syntax)");
509 #define TARGET_VERSION fprintf (stderr, _(" (frv)"))
511 /* Sometimes certain combinations of command options do not make sense on a
512 particular target machine. You can define a macro `OVERRIDE_OPTIONS' to
513 take account of this. This macro, if defined, is executed once just after
514 all the command options have been parsed.
516 Don't use this macro to turn on various extra optimizations for `-O'. That
517 is what `OPTIMIZATION_OPTIONS' is for. */
519 #define OVERRIDE_OPTIONS frv_override_options ()
521 /* Some machines may desire to change what optimizations are performed for
522 various optimization levels. This macro, if defined, is executed once just
523 after the optimization level is determined and before the remainder of the
524 command options have been parsed. Values set in this macro are used as the
525 default values for the other command line options.
527 LEVEL is the optimization level specified; 2 if `-O2' is specified, 1 if
528 `-O' is specified, and 0 if neither is specified.
530 SIZE is nonzero if `-Os' is specified, 0 otherwise.
532 You should not use this macro to change options that are not
533 machine-specific. These should uniformly selected by the same optimization
534 level on all supported machines. Use this macro to enable machbine-specific
537 *Do not examine `write_symbols' in this macro!* The debugging options are
538 *not supposed to alter the generated code. */
539 #define OPTIMIZATION_OPTIONS(LEVEL,SIZE) frv_optimization_options (LEVEL, SIZE)
542 /* Define this macro if debugging can be performed even without a frame
543 pointer. If this macro is defined, GNU CC will turn on the
544 `-fomit-frame-pointer' option whenever `-O' is specified. */
545 /* Frv needs a specific frame layout that includes the frame pointer */
547 #define CAN_DEBUG_WITHOUT_FP
550 /* Small Data Area Support. */
551 /* Maximum size of variables that go in .sdata/.sbss.
552 The -msdata=foo switch also controls how small variables are handled. */
553 #ifndef SDATA_DEFAULT_SIZE
554 #define SDATA_DEFAULT_SIZE 8
557 extern int g_switch_value; /* value of the -G xx switch */
558 extern int g_switch_set; /* whether -G xx was passed. */
563 /* Define this macro to have the value 1 if the most significant bit in a byte
564 has the lowest number; otherwise define it to have the value zero. This
565 means that bit-field instructions count from the most significant bit. If
566 the machine has no bit-field instructions, then this must still be defined,
567 but it doesn't matter which value it is defined to. This macro need not be
570 This macro does not affect the way structure fields are packed into bytes or
571 words; that is controlled by `BYTES_BIG_ENDIAN'. */
572 #define BITS_BIG_ENDIAN 1
574 /* Define this macro to have the value 1 if the most significant byte in a word
575 has the lowest number. This macro need not be a constant. */
576 #define BYTES_BIG_ENDIAN 1
578 /* Define this macro to have the value 1 if, in a multiword object, the most
579 significant word has the lowest number. This applies to both memory
580 locations and registers; GNU CC fundamentally assumes that the order of
581 words in memory is the same as the order in registers. This macro need not
583 #define WORDS_BIG_ENDIAN 1
585 /* Number of storage units in a word; normally 4. */
586 #define UNITS_PER_WORD 4
588 /* A macro to update MODE and UNSIGNEDP when an object whose type is TYPE and
589 which has the specified mode and signedness is to be stored in a register.
590 This macro is only called when TYPE is a scalar type.
592 On most RISC machines, which only have operations that operate on a full
593 register, define this macro to set M to `word_mode' if M is an integer mode
594 narrower than `BITS_PER_WORD'. In most cases, only integer modes should be
595 widened because wider-precision floating-point operations are usually more
596 expensive than their narrower counterparts.
598 For most machines, the macro definition does not change UNSIGNEDP. However,
599 some machines, have instructions that preferentially handle either signed or
600 unsigned quantities of certain modes. For example, on the DEC Alpha, 32-bit
601 loads from memory and 32-bit add instructions sign-extend the result to 64
602 bits. On such machines, set UNSIGNEDP according to which kind of extension
605 Do not define this macro if it would never modify MODE. */
606 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
609 if (GET_MODE_CLASS (MODE) == MODE_INT \
610 && GET_MODE_SIZE (MODE) < 4) \
615 /* Normal alignment required for function parameters on the stack, in bits.
616 All stack parameters receive at least this much alignment regardless of data
617 type. On most machines, this is the same as the size of an integer. */
618 #define PARM_BOUNDARY 32
620 /* Define this macro if you wish to preserve a certain alignment for the stack
621 pointer. The definition is a C expression for the desired alignment
624 If `PUSH_ROUNDING' is not defined, the stack will always be aligned to the
625 specified boundary. If `PUSH_ROUNDING' is defined and specifies a less
626 strict alignment than `STACK_BOUNDARY', the stack may be momentarily
627 unaligned while pushing arguments. */
628 #define STACK_BOUNDARY 64
630 /* Alignment required for a function entry point, in bits. */
631 #define FUNCTION_BOUNDARY 128
633 /* Biggest alignment that any data type can require on this machine,
635 #define BIGGEST_ALIGNMENT 64
637 /* @@@ A hack, needed because libobjc wants to use ADJUST_FIELD_ALIGN for
639 #ifdef IN_TARGET_LIBS
640 #define BIGGEST_FIELD_ALIGNMENT 64
642 /* An expression for the alignment of a structure field FIELD if the
643 alignment computed in the usual way is COMPUTED. GNU CC uses this
644 value instead of the value in `BIGGEST_ALIGNMENT' or
645 `BIGGEST_FIELD_ALIGNMENT', if defined, for structure fields only. */
646 #define ADJUST_FIELD_ALIGN(FIELD, COMPUTED) \
647 frv_adjust_field_align (FIELD, COMPUTED)
650 /* If defined, a C expression to compute the alignment for a static variable.
651 TYPE is the data type, and ALIGN is the alignment that the object
652 would ordinarily have. The value of this macro is used instead of that
653 alignment to align the object.
655 If this macro is not defined, then ALIGN is used.
657 One use of this macro is to increase alignment of medium-size data to make
658 it all fit in fewer cache lines. Another is to cause character arrays to be
659 word-aligned so that `strcpy' calls that copy constants to character arrays
660 can be done inline. */
661 #define DATA_ALIGNMENT(TYPE, ALIGN) \
662 (TREE_CODE (TYPE) == ARRAY_TYPE \
663 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
664 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
666 /* If defined, a C expression to compute the alignment given to a constant that
667 is being placed in memory. CONSTANT is the constant and ALIGN is the
668 alignment that the object would ordinarily have. The value of this macro is
669 used instead of that alignment to align the object.
671 If this macro is not defined, then ALIGN is used.
673 The typical use of this macro is to increase alignment for string constants
674 to be word aligned so that `strcpy' calls that copy constants can be done
676 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
677 (TREE_CODE (EXP) == STRING_CST \
678 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
680 /* Define this macro to be the value 1 if instructions will fail to work if
681 given data not on the nominal alignment. If instructions will merely go
682 slower in that case, define this macro as 0. */
683 #define STRICT_ALIGNMENT 1
685 /* Define this if you wish to imitate the way many other C compilers handle
686 alignment of bitfields and the structures that contain them.
688 The behavior is that the type written for a bit-field (`int', `short', or
689 other integer type) imposes an alignment for the entire structure, as if the
690 structure really did contain an ordinary field of that type. In addition,
691 the bit-field is placed within the structure so that it would fit within such
692 a field, not crossing a boundary for it.
694 Thus, on most machines, a bit-field whose type is written as `int' would not
695 cross a four-byte boundary, and would force four-byte alignment for the
696 whole structure. (The alignment used may not be four bytes; it is
697 controlled by the other alignment parameters.)
699 If the macro is defined, its definition should be a C expression; a nonzero
700 value for the expression enables this behavior.
702 Note that if this macro is not defined, or its value is zero, some bitfields
703 may cross more than one alignment boundary. The compiler can support such
704 references if there are `insv', `extv', and `extzv' insns that can directly
707 The other known way of making bitfields work is to define
708 `STRUCTURE_SIZE_BOUNDARY' as large as `BIGGEST_ALIGNMENT'. Then every
709 structure can be accessed with fullwords.
711 Unless the machine has bit-field instructions or you define
712 `STRUCTURE_SIZE_BOUNDARY' that way, you must define
713 `PCC_BITFIELD_TYPE_MATTERS' to have a nonzero value.
715 If your aim is to make GNU CC use the same conventions for laying out
716 bitfields as are used by another compiler, here is how to investigate what
717 the other compiler does. Compile and run this program:
735 printf ("Size of foo1 is %d\n",
736 sizeof (struct foo1));
737 printf ("Size of foo2 is %d\n",
738 sizeof (struct foo2));
742 If this prints 2 and 5, then the compiler's behavior is what you would get
743 from `PCC_BITFIELD_TYPE_MATTERS'.
745 Defined in svr4.h. */
746 #define PCC_BITFIELD_TYPE_MATTERS 1
749 /* Layout of Source Language Data Types. */
751 #define CHAR_TYPE_SIZE 8
752 #define SHORT_TYPE_SIZE 16
753 #define INT_TYPE_SIZE 32
754 #define LONG_TYPE_SIZE 32
755 #define LONG_LONG_TYPE_SIZE 64
756 #define FLOAT_TYPE_SIZE 32
757 #define DOUBLE_TYPE_SIZE 64
758 #define LONG_DOUBLE_TYPE_SIZE 64
760 /* An expression whose value is 1 or 0, according to whether the type `char'
761 should be signed or unsigned by default. The user can always override this
762 default with the options `-fsigned-char' and `-funsigned-char'. */
763 #define DEFAULT_SIGNED_CHAR 1
766 /* General purpose registers. */
767 #define GPR_FIRST 0 /* First gpr */
768 #define GPR_LAST (GPR_FIRST + 63) /* Last gpr */
769 #define GPR_R0 GPR_FIRST /* R0, constant 0 */
770 #define GPR_FP (GPR_FIRST + 2) /* Frame pointer */
771 #define GPR_SP (GPR_FIRST + 1) /* Stack pointer */
772 /* small data register */
773 #define SDA_BASE_REG ((unsigned)(flag_pic ? PIC_REGNO : (GPR_FIRST+16)))
774 #define PIC_REGNO (GPR_FIRST + 17) /* PIC register */
776 #define FPR_FIRST 64 /* First FP reg */
777 #define FPR_LAST 127 /* Last FP reg */
779 #define DEFAULT_CONDEXEC_TEMPS 4 /* reserve 4 regs by default */
780 #define GPR_TEMP_NUM frv_condexec_temps /* # gprs to reserve for temps */
782 /* We reserve the last CR and CCR in each category to be used as a reload
783 register to reload the CR/CCR registers. This is a kludge. */
784 #define CC_FIRST 128 /* First ICC/FCC reg */
785 #define CC_LAST 135 /* Last ICC/FCC reg */
786 #define ICC_FIRST (CC_FIRST + 4) /* First ICC reg */
787 #define ICC_LAST (CC_FIRST + 7) /* Last ICC reg */
788 #define ICC_TEMP (CC_FIRST + 7) /* Temporary ICC reg */
789 #define FCC_FIRST (CC_FIRST) /* First FCC reg */
790 #define FCC_LAST (CC_FIRST + 3) /* Last FCC reg */
792 /* Amount to shift a value to locate a ICC or FCC register in the CCR
793 register and shift it to the bottom 4 bits. */
794 #define CC_SHIFT_RIGHT(REGNO) (((REGNO) - CC_FIRST) << 2)
796 /* Mask to isolate a single ICC/FCC value. */
799 /* Masks to isolate the various bits in an ICC field. */
800 #define ICC_MASK_N 0x8 /* negative */
801 #define ICC_MASK_Z 0x4 /* zero */
802 #define ICC_MASK_V 0x2 /* overflow */
803 #define ICC_MASK_C 0x1 /* carry */
805 /* Mask to isolate the N/Z flags in an ICC. */
806 #define ICC_MASK_NZ (ICC_MASK_N | ICC_MASK_Z)
808 /* Mask to isolate the Z/C flags in an ICC. */
809 #define ICC_MASK_ZC (ICC_MASK_Z | ICC_MASK_C)
811 /* Masks to isolate the various bits in a FCC field. */
812 #define FCC_MASK_E 0x8 /* equal */
813 #define FCC_MASK_L 0x4 /* less than */
814 #define FCC_MASK_G 0x2 /* greater than */
815 #define FCC_MASK_U 0x1 /* unordered */
817 /* For CCR registers, the machine wants CR4..CR7 to be used for integer
818 code and CR0..CR3 to be used for floating point. */
819 #define CR_FIRST 136 /* First CCR */
820 #define CR_LAST 143 /* Last CCR */
821 #define CR_NUM (CR_LAST-CR_FIRST+1) /* # of CCRs (8) */
822 #define ICR_FIRST (CR_FIRST + 4) /* First integer CCR */
823 #define ICR_LAST (CR_FIRST + 7) /* Last integer CCR */
824 #define ICR_TEMP ICR_LAST /* Temp integer CCR */
825 #define FCR_FIRST (CR_FIRST + 0) /* First float CCR */
826 #define FCR_LAST (CR_FIRST + 3) /* Last float CCR */
828 /* Amount to shift a value to locate a CR register in the CCCR special purpose
829 register and shift it to the bottom 2 bits. */
830 #define CR_SHIFT_RIGHT(REGNO) (((REGNO) - CR_FIRST) << 1)
832 /* Mask to isolate a single CR value. */
835 #define ACC_FIRST 144 /* First acc register */
836 #define ACC_LAST 151 /* Last acc register */
838 #define ACCG_FIRST 152 /* First accg register */
839 #define ACCG_LAST 159 /* Last accg register */
841 #define AP_FIRST 160 /* fake argument pointer */
843 #define SPR_FIRST 161
845 #define LR_REGNO (SPR_FIRST)
846 #define LCR_REGNO (SPR_FIRST + 1)
848 #define GPR_P(R) IN_RANGE_P (R, GPR_FIRST, GPR_LAST)
849 #define GPR_OR_AP_P(R) (GPR_P (R) || (R) == ARG_POINTER_REGNUM)
850 #define FPR_P(R) IN_RANGE_P (R, FPR_FIRST, FPR_LAST)
851 #define CC_P(R) IN_RANGE_P (R, CC_FIRST, CC_LAST)
852 #define ICC_P(R) IN_RANGE_P (R, ICC_FIRST, ICC_LAST)
853 #define FCC_P(R) IN_RANGE_P (R, FCC_FIRST, FCC_LAST)
854 #define CR_P(R) IN_RANGE_P (R, CR_FIRST, CR_LAST)
855 #define ICR_P(R) IN_RANGE_P (R, ICR_FIRST, ICR_LAST)
856 #define FCR_P(R) IN_RANGE_P (R, FCR_FIRST, FCR_LAST)
857 #define ACC_P(R) IN_RANGE_P (R, ACC_FIRST, ACC_LAST)
858 #define ACCG_P(R) IN_RANGE_P (R, ACCG_FIRST, ACCG_LAST)
859 #define SPR_P(R) IN_RANGE_P (R, SPR_FIRST, SPR_LAST)
861 #define GPR_OR_PSEUDO_P(R) (GPR_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
862 #define FPR_OR_PSEUDO_P(R) (FPR_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
863 #define GPR_AP_OR_PSEUDO_P(R) (GPR_OR_AP_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
864 #define CC_OR_PSEUDO_P(R) (CC_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
865 #define ICC_OR_PSEUDO_P(R) (ICC_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
866 #define FCC_OR_PSEUDO_P(R) (FCC_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
867 #define CR_OR_PSEUDO_P(R) (CR_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
868 #define ICR_OR_PSEUDO_P(R) (ICR_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
869 #define FCR_OR_PSEUDO_P(R) (FCR_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
870 #define ACC_OR_PSEUDO_P(R) (ACC_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
871 #define ACCG_OR_PSEUDO_P(R) (ACCG_P (R) || (R) >= FIRST_PSEUDO_REGISTER)
873 #define MAX_STACK_IMMEDIATE_OFFSET 2047
876 /* Register Basics. */
878 /* Number of hardware registers known to the compiler. They receive numbers 0
879 through `FIRST_PSEUDO_REGISTER-1'; thus, the first pseudo register's number
880 really is assigned the number `FIRST_PSEUDO_REGISTER'. */
881 #define FIRST_PSEUDO_REGISTER (SPR_LAST + 1)
883 /* The first/last register that can contain the arguments to a function. */
884 #define FIRST_ARG_REGNUM (GPR_FIRST + 8)
885 #define LAST_ARG_REGNUM (FIRST_ARG_REGNUM + FRV_NUM_ARG_REGS - 1)
887 /* Registers used by the exception handling functions. These should be
888 registers that are not otherwised used by the calling sequence. */
889 #define FIRST_EH_REGNUM 14
890 #define LAST_EH_REGNUM 15
892 /* Scratch registers used in the prologue, epilogue and thunks.
893 OFFSET_REGNO is for loading constant addends that are too big for a
894 single instruction. TEMP_REGNO is used for transferring SPRs to and from
895 the stack, and various other activities. */
896 #define OFFSET_REGNO 4
899 /* Registers used in the prologue. OLD_SP_REGNO is the old stack pointer,
900 which is sometimes used to set up the frame pointer. */
901 #define OLD_SP_REGNO 6
903 /* Registers used in the epilogue. STACKADJ_REGNO stores the exception
904 handler's stack adjustment. */
905 #define STACKADJ_REGNO 6
907 /* Registers used in thunks. JMP_REGNO is used for loading the target
911 #define EH_RETURN_DATA_REGNO(N) ((N) <= (LAST_EH_REGNUM - FIRST_EH_REGNUM)? \
912 (N) + FIRST_EH_REGNUM : INVALID_REGNUM)
913 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (SImode, STACKADJ_REGNO)
914 #define EH_RETURN_HANDLER_RTX RETURN_ADDR_RTX (0, frame_pointer_rtx)
916 /* An initializer that says which registers are used for fixed purposes all
917 throughout the compiled code and are therefore not available for general
918 allocation. These would include the stack pointer, the frame pointer
919 (except on machines where that can be used as a general register when no
920 frame pointer is needed), the program counter on machines where that is
921 considered one of the addressable registers, and any other numbered register
924 This information is expressed as a sequence of numbers, separated by commas
925 and surrounded by braces. The Nth number is 1 if register N is fixed, 0
928 The table initialized from this macro, and the table initialized by the
929 following one, may be overridden at run time either automatically, by the
930 actions of the macro `CONDITIONAL_REGISTER_USAGE', or by the user with the
931 command options `-ffixed-REG', `-fcall-used-REG' and `-fcall-saved-REG'. */
936 gr3 -- Hidden Parameter
937 gr16 -- Small Data reserved
943 cr3 -- reserved to reload FCC registers.
944 cr7 -- reserved to reload ICC registers. */
945 #define FIXED_REGISTERS \
946 { /* Integer Registers */ \
947 1, 1, 1, 1, 0, 0, 0, 0, /* 000-007, gr0 - gr7 */ \
948 0, 0, 0, 0, 0, 0, 0, 0, /* 008-015, gr8 - gr15 */ \
949 1, 1, 0, 0, 0, 0, 0, 0, /* 016-023, gr16 - gr23 */ \
950 0, 0, 0, 0, 1, 1, 1, 1, /* 024-031, gr24 - gr31 */ \
951 0, 0, 0, 0, 0, 0, 0, 0, /* 032-039, gr32 - gr39 */ \
952 0, 0, 0, 0, 0, 0, 0, 0, /* 040-040, gr48 - gr47 */ \
953 0, 0, 0, 0, 0, 0, 0, 0, /* 048-055, gr48 - gr55 */ \
954 0, 0, 0, 0, 0, 0, 0, 0, /* 056-063, gr56 - gr63 */ \
955 /* Float Registers */ \
956 0, 0, 0, 0, 0, 0, 0, 0, /* 064-071, fr0 - fr7 */ \
957 0, 0, 0, 0, 0, 0, 0, 0, /* 072-079, fr8 - fr15 */ \
958 0, 0, 0, 0, 0, 0, 0, 0, /* 080-087, fr16 - fr23 */ \
959 0, 0, 0, 0, 0, 0, 0, 0, /* 088-095, fr24 - fr31 */ \
960 0, 0, 0, 0, 0, 0, 0, 0, /* 096-103, fr32 - fr39 */ \
961 0, 0, 0, 0, 0, 0, 0, 0, /* 104-111, fr48 - fr47 */ \
962 0, 0, 0, 0, 0, 0, 0, 0, /* 112-119, fr48 - fr55 */ \
963 0, 0, 0, 0, 0, 0, 0, 0, /* 120-127, fr56 - fr63 */ \
964 /* Condition Code Registers */ \
965 0, 0, 0, 0, /* 128-131, fcc0 - fcc3 */ \
966 0, 0, 0, 1, /* 132-135, icc0 - icc3 */ \
967 /* Conditional execution Registers (CCR) */ \
968 0, 0, 0, 0, 0, 0, 0, 1, /* 136-143, cr0 - cr7 */ \
970 1, 1, 1, 1, 1, 1, 1, 1, /* 144-151, acc0 - acc7 */ \
971 1, 1, 1, 1, 1, 1, 1, 1, /* 152-159, accg0 - accg7 */ \
972 /* Other registers */ \
973 1, /* 160, AP - fake arg ptr */ \
974 0, /* 161, LR - Link register*/ \
975 0, /* 162, LCR - Loop count reg*/ \
978 /* Like `FIXED_REGISTERS' but has 1 for each register that is clobbered (in
979 general) by function calls as well as for fixed registers. This macro
980 therefore identifies the registers that are not available for general
981 allocation of values that must live across function calls.
983 If a register has 0 in `CALL_USED_REGISTERS', the compiler automatically
984 saves it on function entry and restores it on function exit, if the register
985 is used within the function. */
986 #define CALL_USED_REGISTERS \
987 { /* Integer Registers */ \
988 1, 1, 1, 1, 1, 1, 1, 1, /* 000-007, gr0 - gr7 */ \
989 1, 1, 1, 1, 1, 1, 1, 1, /* 008-015, gr8 - gr15 */ \
990 1, 1, 0, 0, 0, 0, 0, 0, /* 016-023, gr16 - gr23 */ \
991 0, 0, 0, 0, 1, 1, 1, 1, /* 024-031, gr24 - gr31 */ \
992 1, 1, 1, 1, 1, 1, 1, 1, /* 032-039, gr32 - gr39 */ \
993 1, 1, 1, 1, 1, 1, 1, 1, /* 040-040, gr48 - gr47 */ \
994 0, 0, 0, 0, 0, 0, 0, 0, /* 048-055, gr48 - gr55 */ \
995 0, 0, 0, 0, 0, 0, 0, 0, /* 056-063, gr56 - gr63 */ \
996 /* Float Registers */ \
997 1, 1, 1, 1, 1, 1, 1, 1, /* 064-071, fr0 - fr7 */ \
998 1, 1, 1, 1, 1, 1, 1, 1, /* 072-079, fr8 - fr15 */ \
999 0, 0, 0, 0, 0, 0, 0, 0, /* 080-087, fr16 - fr23 */ \
1000 0, 0, 0, 0, 0, 0, 0, 0, /* 088-095, fr24 - fr31 */ \
1001 1, 1, 1, 1, 1, 1, 1, 1, /* 096-103, fr32 - fr39 */ \
1002 1, 1, 1, 1, 1, 1, 1, 1, /* 104-111, fr48 - fr47 */ \
1003 0, 0, 0, 0, 0, 0, 0, 0, /* 112-119, fr48 - fr55 */ \
1004 0, 0, 0, 0, 0, 0, 0, 0, /* 120-127, fr56 - fr63 */ \
1005 /* Condition Code Registers */ \
1006 1, 1, 1, 1, /* 128-131, fcc0 - fcc3 */ \
1007 1, 1, 1, 1, /* 132-135, icc0 - icc3 */ \
1008 /* Conditional execution Registers (CCR) */ \
1009 1, 1, 1, 1, 1, 1, 1, 1, /* 136-143, cr0 - cr7 */ \
1010 /* Accumulators */ \
1011 1, 1, 1, 1, 1, 1, 1, 1, /* 144-151, acc0 - acc7 */ \
1012 1, 1, 1, 1, 1, 1, 1, 1, /* 152-159, accg0 - accg7 */ \
1013 /* Other registers */ \
1014 1, /* 160, AP - fake arg ptr */ \
1015 1, /* 161, LR - Link register*/ \
1016 1, /* 162, LCR - Loop count reg */ \
1019 /* Zero or more C statements that may conditionally modify two variables
1020 `fixed_regs' and `call_used_regs' (both of type `char []') after they have
1021 been initialized from the two preceding macros.
1023 This is necessary in case the fixed or call-clobbered registers depend on
1026 You need not define this macro if it has no work to do.
1028 If the usage of an entire class of registers depends on the target flags,
1029 you may indicate this to GCC by using this macro to modify `fixed_regs' and
1030 `call_used_regs' to 1 for each of the registers in the classes which should
1031 not be used by GCC. Also define the macro `REG_CLASS_FROM_LETTER' to return
1032 `NO_REGS' if it is called with a letter for a class that shouldn't be used.
1034 (However, if this class is not included in `GENERAL_REGS' and all of the
1035 insn patterns whose constraints permit this class are controlled by target
1036 switches, then GCC will automatically avoid using these registers when the
1037 target switches are opposed to them.) */
1039 #define CONDITIONAL_REGISTER_USAGE frv_conditional_register_usage ()
1042 /* Order of allocation of registers. */
1044 /* If defined, an initializer for a vector of integers, containing the numbers
1045 of hard registers in the order in which GNU CC should prefer to use them
1046 (from most preferred to least).
1048 If this macro is not defined, registers are used lowest numbered first (all
1051 One use of this macro is on machines where the highest numbered registers
1052 must always be saved and the save-multiple-registers instruction supports
1053 only sequences of consecutive registers. On such machines, define
1054 `REG_ALLOC_ORDER' to be an initializer that lists the highest numbered
1055 allocatable register first. */
1057 /* On the FRV, allocate GR16 and GR17 after other saved registers so that we
1058 have a better chance of allocating 2 registers at a time and can use the
1059 double word load/store instructions in the prologue. */
1060 #define REG_ALLOC_ORDER \
1062 /* volatile registers */ \
1063 GPR_FIRST + 4, GPR_FIRST + 5, GPR_FIRST + 6, GPR_FIRST + 7, \
1064 GPR_FIRST + 8, GPR_FIRST + 9, GPR_FIRST + 10, GPR_FIRST + 11, \
1065 GPR_FIRST + 12, GPR_FIRST + 13, GPR_FIRST + 14, GPR_FIRST + 15, \
1066 GPR_FIRST + 32, GPR_FIRST + 33, GPR_FIRST + 34, GPR_FIRST + 35, \
1067 GPR_FIRST + 36, GPR_FIRST + 37, GPR_FIRST + 38, GPR_FIRST + 39, \
1068 GPR_FIRST + 40, GPR_FIRST + 41, GPR_FIRST + 42, GPR_FIRST + 43, \
1069 GPR_FIRST + 44, GPR_FIRST + 45, GPR_FIRST + 46, GPR_FIRST + 47, \
1071 FPR_FIRST + 0, FPR_FIRST + 1, FPR_FIRST + 2, FPR_FIRST + 3, \
1072 FPR_FIRST + 4, FPR_FIRST + 5, FPR_FIRST + 6, FPR_FIRST + 7, \
1073 FPR_FIRST + 8, FPR_FIRST + 9, FPR_FIRST + 10, FPR_FIRST + 11, \
1074 FPR_FIRST + 12, FPR_FIRST + 13, FPR_FIRST + 14, FPR_FIRST + 15, \
1075 FPR_FIRST + 32, FPR_FIRST + 33, FPR_FIRST + 34, FPR_FIRST + 35, \
1076 FPR_FIRST + 36, FPR_FIRST + 37, FPR_FIRST + 38, FPR_FIRST + 39, \
1077 FPR_FIRST + 40, FPR_FIRST + 41, FPR_FIRST + 42, FPR_FIRST + 43, \
1078 FPR_FIRST + 44, FPR_FIRST + 45, FPR_FIRST + 46, FPR_FIRST + 47, \
1080 ICC_FIRST + 0, ICC_FIRST + 1, ICC_FIRST + 2, ICC_FIRST + 3, \
1081 FCC_FIRST + 0, FCC_FIRST + 1, FCC_FIRST + 2, FCC_FIRST + 3, \
1082 CR_FIRST + 0, CR_FIRST + 1, CR_FIRST + 2, CR_FIRST + 3, \
1083 CR_FIRST + 4, CR_FIRST + 5, CR_FIRST + 6, CR_FIRST + 7, \
1085 /* saved registers */ \
1086 GPR_FIRST + 18, GPR_FIRST + 19, \
1087 GPR_FIRST + 20, GPR_FIRST + 21, GPR_FIRST + 22, GPR_FIRST + 23, \
1088 GPR_FIRST + 24, GPR_FIRST + 25, GPR_FIRST + 26, GPR_FIRST + 27, \
1089 GPR_FIRST + 48, GPR_FIRST + 49, GPR_FIRST + 50, GPR_FIRST + 51, \
1090 GPR_FIRST + 52, GPR_FIRST + 53, GPR_FIRST + 54, GPR_FIRST + 55, \
1091 GPR_FIRST + 56, GPR_FIRST + 57, GPR_FIRST + 58, GPR_FIRST + 59, \
1092 GPR_FIRST + 60, GPR_FIRST + 61, GPR_FIRST + 62, GPR_FIRST + 63, \
1093 GPR_FIRST + 16, GPR_FIRST + 17, \
1095 FPR_FIRST + 16, FPR_FIRST + 17, FPR_FIRST + 18, FPR_FIRST + 19, \
1096 FPR_FIRST + 20, FPR_FIRST + 21, FPR_FIRST + 22, FPR_FIRST + 23, \
1097 FPR_FIRST + 24, FPR_FIRST + 25, FPR_FIRST + 26, FPR_FIRST + 27, \
1098 FPR_FIRST + 28, FPR_FIRST + 29, FPR_FIRST + 30, FPR_FIRST + 31, \
1099 FPR_FIRST + 48, FPR_FIRST + 49, FPR_FIRST + 50, FPR_FIRST + 51, \
1100 FPR_FIRST + 52, FPR_FIRST + 53, FPR_FIRST + 54, FPR_FIRST + 55, \
1101 FPR_FIRST + 56, FPR_FIRST + 57, FPR_FIRST + 58, FPR_FIRST + 59, \
1102 FPR_FIRST + 60, FPR_FIRST + 61, FPR_FIRST + 62, FPR_FIRST + 63, \
1104 /* special or fixed registers */ \
1105 GPR_FIRST + 0, GPR_FIRST + 1, GPR_FIRST + 2, GPR_FIRST + 3, \
1106 GPR_FIRST + 28, GPR_FIRST + 29, GPR_FIRST + 30, GPR_FIRST + 31, \
1107 ACC_FIRST + 0, ACC_FIRST + 1, ACC_FIRST + 2, ACC_FIRST + 3, \
1108 ACC_FIRST + 4, ACC_FIRST + 5, ACC_FIRST + 6, ACC_FIRST + 7, \
1109 ACCG_FIRST + 0, ACCG_FIRST + 1, ACCG_FIRST + 2, ACCG_FIRST + 3, \
1110 ACCG_FIRST + 4, ACCG_FIRST + 5, ACCG_FIRST + 6, ACCG_FIRST + 7, \
1111 AP_FIRST, LR_REGNO, LCR_REGNO \
1115 /* How Values Fit in Registers. */
1117 /* A C expression for the number of consecutive hard registers, starting at
1118 register number REGNO, required to hold a value of mode MODE.
1120 On a machine where all registers are exactly one word, a suitable definition
1123 #define HARD_REGNO_NREGS(REGNO, MODE) \
1124 ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \
1125 / UNITS_PER_WORD)) */
1127 /* On the FRV, make the CC modes take 3 words in the integer registers, so that
1128 we can build the appropriate instructions to properly reload the values. */
1129 #define HARD_REGNO_NREGS(REGNO, MODE) frv_hard_regno_nregs (REGNO, MODE)
1131 /* A C expression that is nonzero if it is permissible to store a value of mode
1132 MODE in hard register number REGNO (or in several registers starting with
1133 that one). For a machine where all registers are equivalent, a suitable
1136 #define HARD_REGNO_MODE_OK(REGNO, MODE) 1
1138 It is not necessary for this macro to check for the numbers of fixed
1139 registers, because the allocation mechanism considers them to be always
1142 On some machines, double-precision values must be kept in even/odd register
1143 pairs. The way to implement that is to define this macro to reject odd
1144 register numbers for such modes.
1146 The minimum requirement for a mode to be OK in a register is that the
1147 `movMODE' instruction pattern support moves between the register and any
1148 other hard register for which the mode is OK; and that moving a value into
1149 the register and back out not alter it.
1151 Since the same instruction used to move `SImode' will work for all narrower
1152 integer modes, it is not necessary on any machine for `HARD_REGNO_MODE_OK'
1153 to distinguish between these modes, provided you define patterns `movhi',
1154 etc., to take advantage of this. This is useful because of the interaction
1155 between `HARD_REGNO_MODE_OK' and `MODES_TIEABLE_P'; it is very desirable for
1156 all integer modes to be tieable.
1158 Many machines have special registers for floating point arithmetic. Often
1159 people assume that floating point machine modes are allowed only in floating
1160 point registers. This is not true. Any registers that can hold integers
1161 can safely *hold* a floating point machine mode, whether or not floating
1162 arithmetic can be done on it in those registers. Integer move instructions
1163 can be used to move the values.
1165 On some machines, though, the converse is true: fixed-point machine modes
1166 may not go in floating registers. This is true if the floating registers
1167 normalize any value stored in them, because storing a non-floating value
1168 there would garble it. In this case, `HARD_REGNO_MODE_OK' should reject
1169 fixed-point machine modes in floating registers. But if the floating
1170 registers do not automatically normalize, if you can store any bit pattern
1171 in one and retrieve it unchanged without a trap, then any machine mode may
1172 go in a floating register, so you can define this macro to say so.
1174 The primary significance of special floating registers is rather that they
1175 are the registers acceptable in floating point arithmetic instructions.
1176 However, this is of no concern to `HARD_REGNO_MODE_OK'. You handle it by
1177 writing the proper constraints for those instructions.
1179 On some machines, the floating registers are especially slow to access, so
1180 that it is better to store a value in a stack frame than in such a register
1181 if floating point arithmetic is not being done. As long as the floating
1182 registers are not in class `GENERAL_REGS', they will not be used unless some
1183 pattern's constraint asks for one. */
1184 #define HARD_REGNO_MODE_OK(REGNO, MODE) frv_hard_regno_mode_ok (REGNO, MODE)
1186 /* A C expression that is nonzero if it is desirable to choose register
1187 allocation so as to avoid move instructions between a value of mode MODE1
1188 and a value of mode MODE2.
1190 If `HARD_REGNO_MODE_OK (R, MODE1)' and `HARD_REGNO_MODE_OK (R, MODE2)' are
1191 ever different for any R, then `MODES_TIEABLE_P (MODE1, MODE2)' must be
1193 #define MODES_TIEABLE_P(MODE1, MODE2) (MODE1 == MODE2)
1195 /* Define this macro if the compiler should avoid copies to/from CCmode
1196 registers. You should only define this macro if support fo copying to/from
1197 CCmode is incomplete. */
1198 #define AVOID_CCMODE_COPIES
1201 /* Register Classes. */
1203 /* An enumeral type that must be defined with all the register class names as
1204 enumeral values. `NO_REGS' must be first. `ALL_REGS' must be the last
1205 register class, followed by one more enumeral value, `LIM_REG_CLASSES',
1206 which is not a register class but rather tells how many classes there are.
1208 Each register class has a number, which is the value of casting the class
1209 name to type `int'. The number serves as an index in many of the tables
1237 #define GENERAL_REGS GPR_REGS
1239 /* The number of distinct register classes, defined as follows:
1241 #define N_REG_CLASSES (int) LIM_REG_CLASSES */
1242 #define N_REG_CLASSES ((int) LIM_REG_CLASSES)
1244 /* An initializer containing the names of the register classes as C string
1245 constants. These names are used in writing some of the debugging dumps. */
1246 #define REG_CLASS_NAMES { \
1270 /* An initializer containing the contents of the register classes, as integers
1271 which are bit masks. The Nth integer specifies the contents of class N.
1272 The way the integer MASK is interpreted is that register R is in the class
1273 if `MASK & (1 << R)' is 1.
1275 When the machine has more than 32 registers, an integer does not suffice.
1276 Then the integers are replaced by sub-initializers, braced groupings
1277 containing several integers. Each sub-initializer must be suitable as an
1278 initializer for the type `HARD_REG_SET' which is defined in
1279 `hard-reg-set.h'. */
1280 #define REG_CLASS_CONTENTS \
1281 { /* gr0-gr31 gr32-gr63 fr0-fr31 fr32-fr-63 cc/ccr/acc ap/spr */ \
1282 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0}, /* NO_REGS */\
1283 { 0x00000000,0x00000000,0x00000000,0x00000000,0x000000f0,0x0}, /* ICC_REGS */\
1284 { 0x00000000,0x00000000,0x00000000,0x00000000,0x0000000f,0x0}, /* FCC_REGS */\
1285 { 0x00000000,0x00000000,0x00000000,0x00000000,0x000000ff,0x0}, /* CC_REGS */\
1286 { 0x00000000,0x00000000,0x00000000,0x00000000,0x0000f000,0x0}, /* ICR_REGS */\
1287 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00000f00,0x0}, /* FCR_REGS */\
1288 { 0x00000000,0x00000000,0x00000000,0x00000000,0x0000ff00,0x0}, /* CR_REGS */\
1289 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x4}, /* LCR_REGS */\
1290 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x2}, /* LR_REGS */\
1291 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x6}, /* SPR_REGS */\
1292 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00ff0000,0x0}, /* QUAD_ACC */\
1293 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00ff0000,0x0}, /* EVEN_ACC */\
1294 { 0x00000000,0x00000000,0x00000000,0x00000000,0x00ff0000,0x0}, /* ACC_REGS */\
1295 { 0x00000000,0x00000000,0x00000000,0x00000000,0xff000000,0x0}, /* ACCG_REGS*/\
1296 { 0x00000000,0x00000000,0xffffffff,0xffffffff,0x00000000,0x0}, /* QUAD_FPR */\
1297 { 0x00000000,0x00000000,0xffffffff,0xffffffff,0x00000000,0x0}, /* FEVEN_REG*/\
1298 { 0x00000000,0x00000000,0xffffffff,0xffffffff,0x00000000,0x0}, /* FPR_REGS */\
1299 { 0x0ffffffc,0xffffffff,0x00000000,0x00000000,0x00000000,0x0}, /* QUAD_REGS*/\
1300 { 0xfffffffc,0xffffffff,0x00000000,0x00000000,0x00000000,0x0}, /* EVEN_REGS*/\
1301 { 0xffffffff,0xffffffff,0x00000000,0x00000000,0x00000000,0x1}, /* GPR_REGS */\
1302 { 0xffffffff,0xffffffff,0xffffffff,0xffffffff,0xffffffff,0x7}, /* ALL_REGS */\
1305 /* A C expression whose value is a register class containing hard register
1306 REGNO. In general there is more than one such class; choose a class which
1307 is "minimal", meaning that no smaller class also contains the register. */
1309 extern enum reg_class regno_reg_class[];
1310 #define REGNO_REG_CLASS(REGNO) regno_reg_class [REGNO]
1312 /* A macro whose definition is the name of the class to which a valid base
1313 register must belong. A base register is one used in an address which is
1314 the register value plus a displacement. */
1315 #define BASE_REG_CLASS GPR_REGS
1317 /* A macro whose definition is the name of the class to which a valid index
1318 register must belong. An index register is one used in an address where its
1319 value is either multiplied by a scale factor or added to another register
1320 (as well as added to a displacement). */
1321 #define INDEX_REG_CLASS GPR_REGS
1323 /* A C expression which defines the machine-dependent operand constraint
1324 letters for register classes. If CHAR is such a letter, the value should be
1325 the register class corresponding to it. Otherwise, the value should be
1326 `NO_REGS'. The register letter `r', corresponding to class `GENERAL_REGS',
1327 will not be passed to this macro; you do not need to handle it.
1329 The following letters are unavailable, due to being used as
1334 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P'
1335 'Q', 'R', 'S', 'T', 'U'
1337 'g', 'i', 'm', 'n', 'o', 'p', 'r', 's' */
1339 extern enum reg_class reg_class_from_letter[];
1340 #define REG_CLASS_FROM_LETTER(CHAR) reg_class_from_letter [(unsigned char)(CHAR)]
1342 /* A C expression which is nonzero if register number NUM is suitable for use
1343 as a base register in operand addresses. It may be either a suitable hard
1344 register or a pseudo register that has been allocated such a hard register. */
1345 #define REGNO_OK_FOR_BASE_P(NUM) \
1346 ((NUM) < FIRST_PSEUDO_REGISTER \
1348 : (reg_renumber [NUM] >= 0 && GPR_P (reg_renumber [NUM])))
1350 /* A C expression which is nonzero if register number NUM is suitable for use
1351 as an index register in operand addresses. It may be either a suitable hard
1352 register or a pseudo register that has been allocated such a hard register.
1354 The difference between an index register and a base register is that the
1355 index register may be scaled. If an address involves the sum of two
1356 registers, neither one of them scaled, then either one may be labeled the
1357 "base" and the other the "index"; but whichever labeling is used must fit
1358 the machine's constraints of which registers may serve in each capacity.
1359 The compiler will try both labelings, looking for one that is valid, and
1360 will reload one or both registers only if neither labeling works. */
1361 #define REGNO_OK_FOR_INDEX_P(NUM) \
1362 ((NUM) < FIRST_PSEUDO_REGISTER \
1364 : (reg_renumber [NUM] >= 0 && GPR_P (reg_renumber [NUM])))
1366 /* A C expression that places additional restrictions on the register class to
1367 use when it is necessary to copy value X into a register in class CLASS.
1368 The value is a register class; perhaps CLASS, or perhaps another, smaller
1369 class. On many machines, the following definition is safe:
1371 #define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS
1373 Sometimes returning a more restrictive class makes better code. For
1374 example, on the 68000, when X is an integer constant that is in range for a
1375 `moveq' instruction, the value of this macro is always `DATA_REGS' as long
1376 as CLASS includes the data registers. Requiring a data register guarantees
1377 that a `moveq' will be used.
1379 If X is a `const_double', by returning `NO_REGS' you can force X into a
1380 memory constant. This is useful on certain machines where immediate
1381 floating values cannot be loaded into certain kinds of registers.
1383 This declaration must be present. */
1384 #define PREFERRED_RELOAD_CLASS(X, CLASS) CLASS
1386 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
1387 frv_secondary_reload_class (CLASS, MODE, X, TRUE)
1389 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
1390 frv_secondary_reload_class (CLASS, MODE, X, FALSE)
1392 /* A C expression whose value is nonzero if pseudos that have been assigned to
1393 registers of class CLASS would likely be spilled because registers of CLASS
1394 are needed for spill registers.
1396 The default value of this macro returns 1 if CLASS has exactly one register
1397 and zero otherwise. On most machines, this default should be used. Only
1398 define this macro to some other expression if pseudo allocated by
1399 `local-alloc.c' end up in memory because their hard registers were needed
1400 for spill registers. If this macro returns nonzero for those classes, those
1401 pseudos will only be allocated by `global.c', which knows how to reallocate
1402 the pseudo to another register. If there would not be another register
1403 available for reallocation, you should not change the definition of this
1404 macro since the only effect of such a definition would be to slow down
1405 register allocation. */
1406 #define CLASS_LIKELY_SPILLED_P(CLASS) frv_class_likely_spilled_p (CLASS)
1408 /* A C expression for the maximum number of consecutive registers of
1409 class CLASS needed to hold a value of mode MODE.
1411 This is closely related to the macro `HARD_REGNO_NREGS'. In fact, the value
1412 of the macro `CLASS_MAX_NREGS (CLASS, MODE)' should be the maximum value of
1413 `HARD_REGNO_NREGS (REGNO, MODE)' for all REGNO values in the class CLASS.
1415 This macro helps control the handling of multiple-word values in
1418 This declaration is required. */
1419 #define CLASS_MAX_NREGS(CLASS, MODE) frv_class_max_nregs (CLASS, MODE)
1421 #define ZERO_P(x) (x == CONST0_RTX (GET_MODE (x)))
1423 /* 6 bit signed immediate. */
1424 #define CONST_OK_FOR_I(VALUE) IN_RANGE_P(VALUE, -32, 31)
1425 /* 10 bit signed immediate. */
1426 #define CONST_OK_FOR_J(VALUE) IN_RANGE_P(VALUE, -512, 511)
1428 #define CONST_OK_FOR_K(VALUE) 0
1429 /* 16 bit signed immediate. */
1430 #define CONST_OK_FOR_L(VALUE) IN_RANGE_P(VALUE, -32768, 32767)
1431 /* 16 bit unsigned immediate. */
1432 #define CONST_OK_FOR_M(VALUE) IN_RANGE_P (VALUE, 0, 65535)
1433 /* 12 bit signed immediate that is negative. */
1434 #define CONST_OK_FOR_N(VALUE) IN_RANGE_P(VALUE, -2048, -1)
1436 #define CONST_OK_FOR_O(VALUE) ((VALUE) == 0)
1437 /* 12 bit signed immediate that is negative. */
1438 #define CONST_OK_FOR_P(VALUE) IN_RANGE_P(VALUE, 1, 2047)
1440 /* A C expression that defines the machine-dependent operand constraint letters
1441 (`I', `J', `K', .. 'P') that specify particular ranges of integer values.
1442 If C is one of those letters, the expression should check that VALUE, an
1443 integer, is in the appropriate range and return 1 if so, 0 otherwise. If C
1444 is not one of those letters, the value should be 0 regardless of VALUE. */
1445 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
1446 ( (C) == 'I' ? CONST_OK_FOR_I (VALUE) \
1447 : (C) == 'J' ? CONST_OK_FOR_J (VALUE) \
1448 : (C) == 'K' ? CONST_OK_FOR_K (VALUE) \
1449 : (C) == 'L' ? CONST_OK_FOR_L (VALUE) \
1450 : (C) == 'M' ? CONST_OK_FOR_M (VALUE) \
1451 : (C) == 'N' ? CONST_OK_FOR_N (VALUE) \
1452 : (C) == 'O' ? CONST_OK_FOR_O (VALUE) \
1453 : (C) == 'P' ? CONST_OK_FOR_P (VALUE) \
1457 /* A C expression that defines the machine-dependent operand constraint letters
1458 (`G', `H') that specify particular ranges of `const_double' values.
1460 If C is one of those letters, the expression should check that VALUE, an RTX
1461 of code `const_double', is in the appropriate range and return 1 if so, 0
1462 otherwise. If C is not one of those letters, the value should be 0
1463 regardless of VALUE.
1465 `const_double' is used for all floating-point constants and for `DImode'
1466 fixed-point constants. A given letter can accept either or both kinds of
1467 values. It can use `GET_MODE' to distinguish between these kinds. */
1469 #define CONST_DOUBLE_OK_FOR_G(VALUE) \
1470 ((GET_MODE (VALUE) == VOIDmode \
1471 && CONST_DOUBLE_LOW (VALUE) == 0 \
1472 && CONST_DOUBLE_HIGH (VALUE) == 0) \
1473 || ((GET_MODE (VALUE) == SFmode \
1474 || GET_MODE (VALUE) == DFmode) \
1475 && (VALUE) == CONST0_RTX (GET_MODE (VALUE))))
1477 #define CONST_DOUBLE_OK_FOR_H(VALUE) 0
1479 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
1480 ( (C) == 'G' ? CONST_DOUBLE_OK_FOR_G (VALUE) \
1481 : (C) == 'H' ? CONST_DOUBLE_OK_FOR_H (VALUE) \
1484 /* A C expression that defines the optional machine-dependent constraint
1485 letters (`Q', `R', `S', `T', `U') that can be used to segregate specific
1486 types of operands, usually memory references, for the target machine.
1487 Normally this macro will not be defined. If it is required for a particular
1488 target machine, it should return 1 if VALUE corresponds to the operand type
1489 represented by the constraint letter C. If C is not defined as an extra
1490 constraint, the value returned should be 0 regardless of VALUE.
1492 For example, on the ROMP, load instructions cannot have their output in r0
1493 if the memory reference contains a symbolic address. Constraint letter `Q'
1494 is defined as representing a memory address that does *not* contain a
1495 symbolic address. An alternative is specified with a `Q' constraint on the
1496 input and `r' on the output. The next alternative specifies `m' on the
1497 input and a register class that does not include r0 on the output. */
1499 /* Small data references */
1500 #define EXTRA_CONSTRAINT_FOR_Q(VALUE) \
1501 (small_data_symbolic_operand (VALUE, GET_MODE (VALUE)))
1503 /* Double word memory ops that take one instruction. */
1504 #define EXTRA_CONSTRAINT_FOR_R(VALUE) \
1505 (dbl_memory_one_insn_operand (VALUE, GET_MODE (VALUE)))
1508 #define EXTRA_CONSTRAINT_FOR_S(VALUE) (GET_CODE (VALUE) == SYMBOL_REF)
1510 /* Double word memory ops that take two instructions. */
1511 #define EXTRA_CONSTRAINT_FOR_T(VALUE) \
1512 (dbl_memory_two_insn_operand (VALUE, GET_MODE (VALUE)))
1514 /* Memory operand for conditional execution. */
1515 #define EXTRA_CONSTRAINT_FOR_U(VALUE) \
1516 (condexec_memory_operand (VALUE, GET_MODE (VALUE)))
1518 #define EXTRA_CONSTRAINT(VALUE, C) \
1519 ( (C) == 'Q' ? EXTRA_CONSTRAINT_FOR_Q (VALUE) \
1520 : (C) == 'R' ? EXTRA_CONSTRAINT_FOR_R (VALUE) \
1521 : (C) == 'S' ? EXTRA_CONSTRAINT_FOR_S (VALUE) \
1522 : (C) == 'T' ? EXTRA_CONSTRAINT_FOR_T (VALUE) \
1523 : (C) == 'U' ? EXTRA_CONSTRAINT_FOR_U (VALUE) \
1527 /* Basic Stack Layout. */
1529 /* Structure to describe information about a saved range of registers */
1531 typedef struct frv_stack_regs {
1532 const char * name; /* name of the register ranges */
1533 int first; /* first register in the range */
1534 int last; /* last register in the range */
1535 int size_1word; /* # of bytes to be stored via 1 word stores */
1536 int size_2words; /* # of bytes to be stored via 2 word stores */
1537 unsigned char field_p; /* true if the registers are a single SPR */
1538 unsigned char dword_p; /* true if we can do dword stores */
1539 unsigned char special_p; /* true if the regs have a fixed save loc. */
1542 /* Register ranges to look into saving. */
1543 #define STACK_REGS_GPR 0 /* Gprs (normally gr16..gr31, gr48..gr63) */
1544 #define STACK_REGS_FPR 1 /* Fprs (normally fr16..fr31, fr48..fr63) */
1545 #define STACK_REGS_LR 2 /* LR register */
1546 #define STACK_REGS_CC 3 /* CCrs (normally not saved) */
1547 #define STACK_REGS_LCR 5 /* lcr register */
1548 #define STACK_REGS_STDARG 6 /* stdarg registers */
1549 #define STACK_REGS_STRUCT 7 /* structure return (gr3) */
1550 #define STACK_REGS_FP 8 /* FP register */
1551 #define STACK_REGS_MAX 9 /* # of register ranges */
1553 /* Values for save_p field. */
1554 #define REG_SAVE_NO_SAVE 0 /* register not saved */
1555 #define REG_SAVE_1WORD 1 /* save the register */
1556 #define REG_SAVE_2WORDS 2 /* save register and register+1 */
1558 /* Structure used to define the frv stack. */
1560 typedef struct frv_stack {
1561 int total_size; /* total bytes allocated for stack */
1562 int vars_size; /* variable save area size */
1563 int parameter_size; /* outgoing parameter size */
1564 int stdarg_size; /* size of regs needed to be saved for stdarg */
1565 int regs_size; /* size of the saved registers */
1566 int regs_size_1word; /* # of bytes to be stored via 1 word stores */
1567 int regs_size_2words; /* # of bytes to be stored via 2 word stores */
1568 int header_size; /* size of the old FP, struct ret., LR save */
1569 int pretend_size; /* size of pretend args */
1570 int vars_offset; /* offset to save local variables from new SP*/
1571 int regs_offset; /* offset to save registers from new SP */
1572 /* register range information */
1573 frv_stack_regs_t regs[STACK_REGS_MAX];
1574 /* offset to store each register */
1575 int reg_offset[FIRST_PSEUDO_REGISTER];
1576 /* whether to save register (& reg+1) */
1577 unsigned char save_p[FIRST_PSEUDO_REGISTER];
1580 /* Define this macro if pushing a word onto the stack moves the stack pointer
1581 to a smaller address. */
1582 #define STACK_GROWS_DOWNWARD 1
1584 /* Define this macro if the addresses of local variable slots are at negative
1585 offsets from the frame pointer. */
1586 #define FRAME_GROWS_DOWNWARD
1588 /* Offset from the frame pointer to the first local variable slot to be
1591 If `FRAME_GROWS_DOWNWARD', find the next slot's offset by subtracting the
1592 first slot's length from `STARTING_FRAME_OFFSET'. Otherwise, it is found by
1593 adding the length of the first slot to the value `STARTING_FRAME_OFFSET'. */
1594 #define STARTING_FRAME_OFFSET 0
1596 /* Offset from the stack pointer register to the first location at which
1597 outgoing arguments are placed. If not specified, the default value of zero
1598 is used. This is the proper value for most machines.
1600 If `ARGS_GROW_DOWNWARD', this is the offset to the location above the first
1601 location at which outgoing arguments are placed. */
1602 #define STACK_POINTER_OFFSET 0
1604 /* Offset from the argument pointer register to the first argument's address.
1605 On some machines it may depend on the data type of the function.
1607 If `ARGS_GROW_DOWNWARD', this is the offset to the location above the first
1608 argument's address. */
1609 #define FIRST_PARM_OFFSET(FUNDECL) 0
1611 /* A C expression whose value is RTL representing the address in a stack frame
1612 where the pointer to the caller's frame is stored. Assume that FRAMEADDR is
1613 an RTL expression for the address of the stack frame itself.
1615 If you don't define this macro, the default is to return the value of
1616 FRAMEADDR--that is, the stack frame address is also the address of the stack
1617 word that points to the previous frame. */
1618 #define DYNAMIC_CHAIN_ADDRESS(FRAMEADDR) frv_dynamic_chain_address (FRAMEADDR)
1620 /* A C expression whose value is RTL representing the value of the return
1621 address for the frame COUNT steps up from the current frame, after the
1622 prologue. FRAMEADDR is the frame pointer of the COUNT frame, or the frame
1623 pointer of the COUNT - 1 frame if `RETURN_ADDR_IN_PREVIOUS_FRAME' is
1626 The value of the expression must always be the correct address when COUNT is
1627 zero, but may be `NULL_RTX' if there is not way to determine the return
1628 address of other frames. */
1629 #define RETURN_ADDR_RTX(COUNT, FRAMEADDR) frv_return_addr_rtx (COUNT, FRAMEADDR)
1631 /* This function contains machine specific function data. */
1632 struct machine_function GTY(())
1634 /* True if we have created an rtx that relies on the stack frame. */
1638 #define RETURN_POINTER_REGNUM LR_REGNO
1640 /* A C expression whose value is RTL representing the location of the incoming
1641 return address at the beginning of any function, before the prologue. This
1642 RTL is either a `REG', indicating that the return value is saved in `REG',
1643 or a `MEM' representing a location in the stack.
1645 You only need to define this macro if you want to support call frame
1646 debugging information like that provided by DWARF 2. */
1647 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (SImode, RETURN_POINTER_REGNUM)
1650 /* Register That Address the Stack Frame. */
1652 /* The register number of the stack pointer register, which must also be a
1653 fixed register according to `FIXED_REGISTERS'. On most machines, the
1654 hardware determines which register this is. */
1655 #define STACK_POINTER_REGNUM (GPR_FIRST + 1)
1657 /* The register number of the frame pointer register, which is used to access
1658 automatic variables in the stack frame. On some machines, the hardware
1659 determines which register this is. On other machines, you can choose any
1660 register you wish for this purpose. */
1661 #define FRAME_POINTER_REGNUM (GPR_FIRST + 2)
1663 /* The register number of the arg pointer register, which is used to access the
1664 function's argument list. On some machines, this is the same as the frame
1665 pointer register. On some machines, the hardware determines which register
1666 this is. On other machines, you can choose any register you wish for this
1667 purpose. If this is not the same register as the frame pointer register,
1668 then you must mark it as a fixed register according to `FIXED_REGISTERS', or
1669 arrange to be able to eliminate it. */
1671 /* On frv this is a fake register that is eliminated in
1672 terms of either the frame pointer or stack pointer. */
1673 #define ARG_POINTER_REGNUM AP_FIRST
1675 /* Register numbers used for passing a function's static chain pointer. If
1676 register windows are used, the register number as seen by the called
1677 function is `STATIC_CHAIN_INCOMING_REGNUM', while the register number as
1678 seen by the calling function is `STATIC_CHAIN_REGNUM'. If these registers
1679 are the same, `STATIC_CHAIN_INCOMING_REGNUM' need not be defined.
1681 The static chain register need not be a fixed register.
1683 If the static chain is passed in memory, these macros should not be defined;
1684 instead, the next two macros should be defined. */
1685 #define STATIC_CHAIN_REGNUM (GPR_FIRST + 7)
1686 #define STATIC_CHAIN_INCOMING_REGNUM (GPR_FIRST + 7)
1689 /* Eliminating the Frame Pointer and the Arg Pointer. */
1691 /* A C expression which is nonzero if a function must have and use a frame
1692 pointer. This expression is evaluated in the reload pass. If its value is
1693 nonzero the function will have a frame pointer.
1695 The expression can in principle examine the current function and decide
1696 according to the facts, but on most machines the constant 0 or the constant
1697 1 suffices. Use 0 when the machine allows code to be generated with no
1698 frame pointer, and doing so saves some time or space. Use 1 when there is
1699 no possible advantage to avoiding a frame pointer.
1701 In certain cases, the compiler does not know how to produce valid code
1702 without a frame pointer. The compiler recognizes those cases and
1703 automatically gives the function a frame pointer regardless of what
1704 `FRAME_POINTER_REQUIRED' says. You don't need to worry about them.
1706 In a function that does not require a frame pointer, the frame pointer
1707 register can be allocated for ordinary usage, unless you mark it as a fixed
1708 register. See `FIXED_REGISTERS' for more information. */
1709 #define FRAME_POINTER_REQUIRED frv_frame_pointer_required ()
1711 /* If defined, this macro specifies a table of register pairs used to eliminate
1712 unneeded registers that point into the stack frame. If it is not defined,
1713 the only elimination attempted by the compiler is to replace references to
1714 the frame pointer with references to the stack pointer.
1716 The definition of this macro is a list of structure initializations, each of
1717 which specifies an original and replacement register.
1719 On some machines, the position of the argument pointer is not known until
1720 the compilation is completed. In such a case, a separate hard register must
1721 be used for the argument pointer. This register can be eliminated by
1722 replacing it with either the frame pointer or the argument pointer,
1723 depending on whether or not the frame pointer has been eliminated.
1725 In this case, you might specify:
1726 #define ELIMINABLE_REGS \
1727 {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1728 {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
1729 {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
1731 Note that the elimination of the argument pointer with the stack pointer is
1732 specified first since that is the preferred elimination. */
1734 #define ELIMINABLE_REGS \
1736 {ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1737 {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
1738 {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM} \
1741 /* A C expression that returns nonzero if the compiler is allowed to try to
1742 replace register number FROM with register number TO. This macro need only
1743 be defined if `ELIMINABLE_REGS' is defined, and will usually be the constant
1744 1, since most of the cases preventing register elimination are things that
1745 the compiler already knows about. */
1747 #define CAN_ELIMINATE(FROM, TO) \
1748 ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM \
1749 ? ! frame_pointer_needed \
1752 /* This macro is similar to `INITIAL_FRAME_POINTER_OFFSET'. It specifies the
1753 initial difference between the specified pair of registers. This macro must
1754 be defined if `ELIMINABLE_REGS' is defined. */
1756 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1757 (OFFSET) = frv_initial_elimination_offset (FROM, TO)
1760 /* Passing Function Arguments on the Stack. */
1762 /* If defined, the maximum amount of space required for outgoing arguments will
1763 be computed and placed into the variable
1764 `current_function_outgoing_args_size'. No space will be pushed onto the
1765 stack for each call; instead, the function prologue should increase the
1766 stack frame size by this amount.
1768 Defining both `PUSH_ROUNDING' and `ACCUMULATE_OUTGOING_ARGS' is not
1770 #define ACCUMULATE_OUTGOING_ARGS 1
1772 /* A C expression that should indicate the number of bytes of its own arguments
1773 that a function pops on returning, or 0 if the function pops no arguments
1774 and the caller must therefore pop them all after the function returns.
1776 FUNDECL is a C variable whose value is a tree node that describes the
1777 function in question. Normally it is a node of type `FUNCTION_DECL' that
1778 describes the declaration of the function. From this it is possible to
1779 obtain the DECL_ATTRIBUTES of the function.
1781 FUNTYPE is a C variable whose value is a tree node that describes the
1782 function in question. Normally it is a node of type `FUNCTION_TYPE' that
1783 describes the data type of the function. From this it is possible to obtain
1784 the data types of the value and arguments (if known).
1786 When a call to a library function is being considered, FUNTYPE will contain
1787 an identifier node for the library function. Thus, if you need to
1788 distinguish among various library functions, you can do so by their names.
1789 Note that "library function" in this context means a function used to
1790 perform arithmetic, whose name is known specially in the compiler and was
1791 not mentioned in the C code being compiled.
1793 STACK-SIZE is the number of bytes of arguments passed on the stack. If a
1794 variable number of bytes is passed, it is zero, and argument popping will
1795 always be the responsibility of the calling function.
1797 On the VAX, all functions always pop their arguments, so the definition of
1798 this macro is STACK-SIZE. On the 68000, using the standard calling
1799 convention, no functions pop their arguments, so the value of the macro is
1800 always 0 in this case. But an alternative calling convention is available
1801 in which functions that take a fixed number of arguments pop them but other
1802 functions (such as `printf') pop nothing (the caller pops all). When this
1803 convention is in use, FUNTYPE is examined to determine whether a function
1804 takes a fixed number of arguments. */
1805 #define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACK_SIZE) 0
1808 /* Function Arguments in Registers. */
1810 /* Nonzero if we do not know how to pass TYPE solely in registers.
1811 We cannot do so in the following cases:
1813 - if the type has variable size
1814 - if the type is marked as addressable (it is required to be constructed
1816 - if the type is a structure or union. */
1818 #define MUST_PASS_IN_STACK(MODE,TYPE) \
1819 (((MODE) == BLKmode) \
1821 && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
1822 || TREE_CODE (TYPE) == RECORD_TYPE \
1823 || TREE_CODE (TYPE) == UNION_TYPE \
1824 || TREE_CODE (TYPE) == QUAL_UNION_TYPE \
1825 || TREE_ADDRESSABLE (TYPE))))
1827 /* The number of register assigned to holding function arguments. */
1829 #define FRV_NUM_ARG_REGS 6
1831 /* A C expression that controls whether a function argument is passed in a
1832 register, and which register.
1834 The arguments are CUM, of type CUMULATIVE_ARGS, which summarizes (in a way
1835 defined by INIT_CUMULATIVE_ARGS and FUNCTION_ARG_ADVANCE) all of the previous
1836 arguments so far passed in registers; MODE, the machine mode of the argument;
1837 TYPE, the data type of the argument as a tree node or 0 if that is not known
1838 (which happens for C support library functions); and NAMED, which is 1 for an
1839 ordinary argument and 0 for nameless arguments that correspond to `...' in the
1840 called function's prototype.
1842 The value of the expression should either be a `reg' RTX for the hard
1843 register in which to pass the argument, or zero to pass the argument on the
1846 For machines like the VAX and 68000, where normally all arguments are
1847 pushed, zero suffices as a definition.
1849 The usual way to make the ANSI library `stdarg.h' work on a machine where
1850 some arguments are usually passed in registers, is to cause nameless
1851 arguments to be passed on the stack instead. This is done by making
1852 `FUNCTION_ARG' return 0 whenever NAMED is 0.
1854 You may use the macro `MUST_PASS_IN_STACK (MODE, TYPE)' in the definition of
1855 this macro to determine if this argument is of a type that must be passed in
1856 the stack. If `REG_PARM_STACK_SPACE' is not defined and `FUNCTION_ARG'
1857 returns nonzero for such an argument, the compiler will abort. If
1858 `REG_PARM_STACK_SPACE' is defined, the argument will be computed in the
1859 stack and then loaded into a register. */
1860 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1861 frv_function_arg (&CUM, MODE, TYPE, NAMED, FALSE)
1863 /* Define this macro if the target machine has "register windows", so that the
1864 register in which a function sees an arguments is not necessarily the same
1865 as the one in which the caller passed the argument.
1867 For such machines, `FUNCTION_ARG' computes the register in which the caller
1868 passes the value, and `FUNCTION_INCOMING_ARG' should be defined in a similar
1869 fashion to tell the function being called where the arguments will arrive.
1871 If `FUNCTION_INCOMING_ARG' is not defined, `FUNCTION_ARG' serves both
1874 #define FUNCTION_INCOMING_ARG(CUM, MODE, TYPE, NAMED) \
1875 frv_function_arg (&CUM, MODE, TYPE, NAMED, TRUE)
1877 /* A C expression for the number of words, at the beginning of an argument,
1878 must be put in registers. The value must be zero for arguments that are
1879 passed entirely in registers or that are entirely pushed on the stack.
1881 On some machines, certain arguments must be passed partially in registers
1882 and partially in memory. On these machines, typically the first N words of
1883 arguments are passed in registers, and the rest on the stack. If a
1884 multi-word argument (a `double' or a structure) crosses that boundary, its
1885 first few words must be passed in registers and the rest must be pushed.
1886 This macro tells the compiler when this occurs, and how many of the words
1887 should go in registers.
1889 `FUNCTION_ARG' for these arguments should return the first register to be
1890 used by the caller for this argument; likewise `FUNCTION_INCOMING_ARG', for
1891 the called function. */
1892 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
1893 frv_function_arg_partial_nregs (&CUM, MODE, TYPE, NAMED)
1895 /* extern int frv_function_arg_partial_nregs PARAMS ((CUMULATIVE_ARGS, int, Tree, int)); */
1897 /* A C expression that indicates when an argument must be passed by reference.
1898 If nonzero for an argument, a copy of that argument is made in memory and a
1899 pointer to the argument is passed instead of the argument itself. The
1900 pointer is passed in whatever way is appropriate for passing a pointer to
1903 On machines where `REG_PARM_STACK_SPACE' is not defined, a suitable
1904 definition of this macro might be
1905 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
1906 MUST_PASS_IN_STACK (MODE, TYPE) */
1907 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
1908 frv_function_arg_pass_by_reference (&CUM, MODE, TYPE, NAMED)
1910 /* If defined, a C expression that indicates when it is the called function's
1911 responsibility to make a copy of arguments passed by invisible reference.
1912 Normally, the caller makes a copy and passes the address of the copy to the
1913 routine being called. When FUNCTION_ARG_CALLEE_COPIES is defined and is
1914 nonzero, the caller does not make a copy. Instead, it passes a pointer to
1915 the "live" value. The called function must not modify this value. If it
1916 can be determined that the value won't be modified, it need not make a copy;
1917 otherwise a copy must be made. */
1918 #define FUNCTION_ARG_CALLEE_COPIES(CUM, MODE, TYPE, NAMED) \
1919 frv_function_arg_callee_copies (&CUM, MODE, TYPE, NAMED)
1921 /* If defined, a C expression that indicates when it is more desirable to keep
1922 an argument passed by invisible reference as a reference, rather than
1923 copying it to a pseudo register. */
1924 #define FUNCTION_ARG_KEEP_AS_REFERENCE(CUM, MODE, TYPE, NAMED) \
1925 frv_function_arg_keep_as_reference (&CUM, MODE, TYPE, NAMED)
1927 /* A C type for declaring a variable that is used as the first argument of
1928 `FUNCTION_ARG' and other related values. For some target machines, the type
1929 `int' suffices and can hold the number of bytes of argument so far.
1931 There is no need to record in `CUMULATIVE_ARGS' anything about the arguments
1932 that have been passed on the stack. The compiler has other variables to
1933 keep track of that. For target machines on which all arguments are passed
1934 on the stack, there is no need to store anything in `CUMULATIVE_ARGS';
1935 however, the data structure must exist and should not be empty, so use
1937 #define CUMULATIVE_ARGS int
1939 /* A C statement (sans semicolon) for initializing the variable CUM for the
1940 state at the beginning of the argument list. The variable has type
1941 `CUMULATIVE_ARGS'. The value of FNTYPE is the tree node for the data type
1942 of the function which will receive the args, or 0 if the args are to a
1943 compiler support library function. The value of INDIRECT is nonzero when
1944 processing an indirect call, for example a call through a function pointer.
1945 The value of INDIRECT is zero for a call to an explicitly named function, a
1946 library function call, or when `INIT_CUMULATIVE_ARGS' is used to find
1947 arguments for the function being compiled.
1949 When processing a call to a compiler support library function, LIBNAME
1950 identifies which one. It is a `symbol_ref' rtx which contains the name of
1951 the function, as a string. LIBNAME is 0 when an ordinary C function call is
1952 being processed. Thus, each time this macro is called, either LIBNAME or
1953 FNTYPE is nonzero, but never both of them at once. */
1955 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL) \
1956 frv_init_cumulative_args (&CUM, FNTYPE, LIBNAME, FNDECL, FALSE)
1958 /* Like `INIT_CUMULATIVE_ARGS' but overrides it for the purposes of finding the
1959 arguments for the function being compiled. If this macro is undefined,
1960 `INIT_CUMULATIVE_ARGS' is used instead.
1962 The value passed for LIBNAME is always 0, since library routines with
1963 special calling conventions are never compiled with GNU CC. The argument
1964 LIBNAME exists for symmetry with `INIT_CUMULATIVE_ARGS'. */
1966 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM, FNTYPE, LIBNAME) \
1967 frv_init_cumulative_args (&CUM, FNTYPE, LIBNAME, NULL, TRUE)
1969 /* A C statement (sans semicolon) to update the summarizer variable CUM to
1970 advance past an argument in the argument list. The values MODE, TYPE and
1971 NAMED describe that argument. Once this is done, the variable CUM is
1972 suitable for analyzing the *following* argument with `FUNCTION_ARG', etc.
1974 This macro need not do anything if the argument in question was passed on
1975 the stack. The compiler knows how to track the amount of stack space used
1976 for arguments without any special help. */
1977 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1978 frv_function_arg_advance (&CUM, MODE, TYPE, NAMED)
1980 /* If defined, a C expression that gives the alignment boundary, in bits, of an
1981 argument with the specified mode and type. If it is not defined,
1982 `PARM_BOUNDARY' is used for all arguments. */
1984 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
1985 frv_function_arg_boundary (MODE, TYPE)
1987 /* A C expression that is nonzero if REGNO is the number of a hard register in
1988 which function arguments are sometimes passed. This does *not* include
1989 implicit arguments such as the static chain and the structure-value address.
1990 On many machines, no registers can be used for this purpose since all
1991 function arguments are pushed on the stack. */
1992 #define FUNCTION_ARG_REGNO_P(REGNO) \
1993 ((REGNO) >= FIRST_ARG_REGNUM && ((REGNO) <= LAST_ARG_REGNUM))
1996 /* How Scalar Function Values are Returned. */
1998 /* The number of the hard register that is used to return a scalar value from a
2000 #define RETURN_VALUE_REGNUM (GPR_FIRST + 8)
2002 /* A C expression to create an RTX representing the place where a function
2003 returns a value of data type VALTYPE. VALTYPE is a tree node representing a
2004 data type. Write `TYPE_MODE (VALTYPE)' to get the machine mode used to
2005 represent that type. On many machines, only the mode is relevant.
2006 (Actually, on most machines, scalar values are returned in the same place
2007 regardless of mode).
2009 If `PROMOTE_FUNCTION_RETURN' is defined, you must apply the same promotion
2010 rules specified in `PROMOTE_MODE' if VALTYPE is a scalar type.
2012 If the precise function being called is known, FUNC is a tree node
2013 (`FUNCTION_DECL') for it; otherwise, FUNC is a null pointer. This makes it
2014 possible to use a different value-returning convention for specific
2015 functions when all their calls are known.
2017 `FUNCTION_VALUE' is not used for return vales with aggregate data types,
2018 because these are returned in another way. See `STRUCT_VALUE_REGNUM' and
2019 related macros, below. */
2020 #define FUNCTION_VALUE(VALTYPE, FUNC) \
2021 gen_rtx (REG, TYPE_MODE (VALTYPE), RETURN_VALUE_REGNUM)
2023 /* A C expression to create an RTX representing the place where a library
2024 function returns a value of mode MODE.
2026 Note that "library function" in this context means a compiler support
2027 routine, used to perform arithmetic, whose name is known specially by the
2028 compiler and was not mentioned in the C code being compiled.
2030 The definition of `LIBRARY_VALUE' need not be concerned aggregate data
2031 types, because none of the library functions returns such types. */
2032 #define LIBCALL_VALUE(MODE) gen_rtx (REG, MODE, RETURN_VALUE_REGNUM)
2034 /* A C expression that is nonzero if REGNO is the number of a hard register in
2035 which the values of called function may come back.
2037 A register whose use for returning values is limited to serving as the
2038 second of a pair (for a value of type `double', say) need not be recognized
2039 by this macro. So for most machines, this definition suffices:
2041 #define FUNCTION_VALUE_REGNO_P(N) ((N) == RETURN)
2043 If the machine has register windows, so that the caller and the called
2044 function use different registers for the return value, this macro should
2045 recognize only the caller's register numbers. */
2046 #define FUNCTION_VALUE_REGNO_P(REGNO) ((REGNO) == RETURN_VALUE_REGNUM)
2049 /* How Large Values are Returned. */
2051 /* If the structure value address is passed in a register, then
2052 `STRUCT_VALUE_REGNUM' should be the number of that register. */
2053 #define STRUCT_VALUE_REGNUM (GPR_FIRST + 3)
2056 /* Function Entry and Exit. */
2058 /* Define this macro as a C expression that is nonzero if the return
2059 instruction or the function epilogue ignores the value of the stack pointer;
2060 in other words, if it is safe to delete an instruction to adjust the stack
2061 pointer before a return from the function.
2063 Note that this macro's value is relevant only for functions for which frame
2064 pointers are maintained. It is never safe to delete a final stack
2065 adjustment in a function that has no frame pointer, and the compiler knows
2066 this regardless of `EXIT_IGNORE_STACK'. */
2067 #define EXIT_IGNORE_STACK 1
2069 /* Generating Code for Profiling. */
2071 /* A C statement or compound statement to output to FILE some assembler code to
2072 call the profiling subroutine `mcount'. Before calling, the assembler code
2073 must load the address of a counter variable into a register where `mcount'
2074 expects to find the address. The name of this variable is `LP' followed by
2075 the number LABELNO, so you would generate the name using `LP%d' in a
2078 The details of how the address should be passed to `mcount' are determined
2079 by your operating system environment, not by GNU CC. To figure them out,
2080 compile a small program for profiling using the system's installed C
2081 compiler and look at the assembler code that results.
2083 This declaration must be present, but it can be an abort if profiling is
2086 #define FUNCTION_PROFILER(FILE, LABELNO) abort ()
2089 /* Implementing the Varargs Macros. */
2091 /* If defined, is a C expression that produces the machine-specific code for a
2092 call to `__builtin_saveregs'. This code will be moved to the very beginning
2093 of the function, before any parameter access are made. The return value of
2094 this function should be an RTX that contains the value to use as the return
2095 of `__builtin_saveregs'.
2097 If this macro is not defined, the compiler will output an ordinary call to
2098 the library function `__builtin_saveregs'. */
2100 #define EXPAND_BUILTIN_SAVEREGS() frv_expand_builtin_saveregs ()
2102 /* This macro offers an alternative to using `__builtin_saveregs' and defining
2103 the macro `EXPAND_BUILTIN_SAVEREGS'. Use it to store the anonymous register
2104 arguments into the stack so that all the arguments appear to have been
2105 passed consecutively on the stack. Once this is done, you can use the
2106 standard implementation of varargs that works for machines that pass all
2107 their arguments on the stack.
2109 The argument ARGS_SO_FAR is the `CUMULATIVE_ARGS' data structure, containing
2110 the values that obtain after processing of the named arguments. The
2111 arguments MODE and TYPE describe the last named argument--its machine mode
2112 and its data type as a tree node.
2114 The macro implementation should do two things: first, push onto the stack
2115 all the argument registers *not* used for the named arguments, and second,
2116 store the size of the data thus pushed into the `int'-valued variable whose
2117 name is supplied as the argument PRETEND_ARGS_SIZE. The value that you
2118 store here will serve as additional offset for setting up the stack frame.
2120 Because you must generate code to push the anonymous arguments at compile
2121 time without knowing their data types, `SETUP_INCOMING_VARARGS' is only
2122 useful on machines that have just a single category of argument register and
2123 use it uniformly for all data types.
2125 If the argument SECOND_TIME is nonzero, it means that the arguments of the
2126 function are being analyzed for the second time. This happens for an inline
2127 function, which is not actually compiled until the end of the source file.
2128 The macro `SETUP_INCOMING_VARARGS' should not generate any instructions in
2130 #define SETUP_INCOMING_VARARGS(ARGS_SO_FAR, MODE, TYPE, PRETEND_ARGS_SIZE, SECOND_TIME) \
2131 frv_setup_incoming_varargs (& ARGS_SO_FAR, (int) MODE, TYPE, \
2132 & PRETEND_ARGS_SIZE, SECOND_TIME)
2134 /* Implement the stdarg/varargs va_start macro. STDARG_P is nonzero if this
2135 is stdarg.h instead of varargs.h. VALIST is the tree of the va_list
2136 variable to initialize. NEXTARG is the machine independent notion of the
2137 'next' argument after the variable arguments. If not defined, a standard
2138 implementation will be defined that works for arguments passed on the stack. */
2140 #define EXPAND_BUILTIN_VA_START(VALIST, NEXTARG) \
2141 (frv_expand_builtin_va_start(VALIST, NEXTARG))
2143 /* Implement the stdarg/varargs va_arg macro. VALIST is the variable of type
2144 va_list as a tree, TYPE is the type passed to va_arg. */
2146 #define EXPAND_BUILTIN_VA_ARG(VALIST, TYPE) \
2147 (frv_expand_builtin_va_arg (VALIST, TYPE))
2150 /* Trampolines for Nested Functions. */
2152 /* A C expression for the size in bytes of the trampoline, as an integer. */
2153 #define TRAMPOLINE_SIZE frv_trampoline_size ()
2155 /* Alignment required for trampolines, in bits.
2157 If you don't define this macro, the value of `BIGGEST_ALIGNMENT' is used for
2158 aligning trampolines. */
2159 #define TRAMPOLINE_ALIGNMENT 32
2161 /* A C statement to initialize the variable parts of a trampoline. ADDR is an
2162 RTX for the address of the trampoline; FNADDR is an RTX for the address of
2163 the nested function; STATIC_CHAIN is an RTX for the static chain value that
2164 should be passed to the function when it is called. */
2165 #define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, STATIC_CHAIN) \
2166 frv_initialize_trampoline (ADDR, FNADDR, STATIC_CHAIN)
2168 /* Define this macro if trampolines need a special subroutine to do their work.
2169 The macro should expand to a series of `asm' statements which will be
2170 compiled with GNU CC. They go in a library function named
2171 `__transfer_from_trampoline'.
2173 If you need to avoid executing the ordinary prologue code of a compiled C
2174 function when you jump to the subroutine, you can do so by placing a special
2175 label of your own in the assembler code. Use one `asm' statement to
2176 generate an assembler label, and another to make the label global. Then
2177 trampolines can use that label to jump directly to your special assembler
2180 #ifdef __FRV_UNDERSCORE__
2181 #define TRAMPOLINE_TEMPLATE_NAME "___trampoline_template"
2183 #define TRAMPOLINE_TEMPLATE_NAME "__trampoline_template"
2186 #define TRANSFER_FROM_TRAMPOLINE \
2187 extern int _write (int, const void *, unsigned); \
2190 __trampoline_setup (addr, size, fnaddr, sc) \
2196 extern short __trampoline_template[]; \
2197 short * to = addr; \
2198 short * from = &__trampoline_template[0]; \
2203 _write (2, "__trampoline_setup bad size\n", \
2204 sizeof ("__trampoline_setup bad size\n") - 1); \
2209 to[1] = (short)(fnaddr); \
2211 to[3] = (short)(sc); \
2213 to[5] = (short)(fnaddr >> 16); \
2215 to[7] = (short)(sc >> 16); \
2219 for (i = 0; i < 20; i++) \
2220 __asm__ volatile ("dcf @(%0,%1)\n\tici @(%0,%1)" :: "r" (to), "r" (i)); \
2224 "\t.globl " TRAMPOLINE_TEMPLATE_NAME "\n" \
2226 TRAMPOLINE_TEMPLATE_NAME ":\n" \
2227 "\tsetlos #0, gr6\n" /* jump register */ \
2228 "\tsetlos #0, gr7\n" /* static chain */ \
2229 "\tsethi #0, gr6\n" \
2230 "\tsethi #0, gr7\n" \
2231 "\tjmpl @(gr0,gr6)\n");
2234 /* Implicit Calls to Library Routines. */
2236 /* A C string constant giving the name of the function to call for the
2237 remainder in division of one signed full-word by another. If you do not
2238 define this macro, the default name is used, which is `__modsi3', a function
2239 defined in `libgcc.a'. */
2240 #define MODSI3_LIBCALL "__modi"
2242 /* A C string constant giving the name of the function to call for the
2243 remainder in division of one unsigned full-word by another. If you do not
2244 define this macro, the default name is used, which is `__umodsi3', a
2245 function defined in `libgcc.a'. */
2246 #define UMODSI3_LIBCALL "__umodi"
2248 /* A C string constant giving the name of the function to call for
2249 multiplication of one signed double-word by another. If you do not define
2250 this macro, the default name is used, which is `__muldi3', a function
2251 defined in `libgcc.a'. */
2252 #define MULDI3_LIBCALL "__mulll"
2254 /* A C string constant giving the name of the function to call for division of
2255 one signed double-word by another. If you do not define this macro, the
2256 default name is used, which is `__divdi3', a function defined in `libgcc.a'. */
2257 #define DIVDI3_LIBCALL "__divll"
2259 /* A C string constant giving the name of the function to call for division of
2260 one unsigned full-word by another. If you do not define this macro, the
2261 default name is used, which is `__udivdi3', a function defined in
2263 #define UDIVDI3_LIBCALL "__udivll"
2265 /* A C string constant giving the name of the function to call for the
2266 remainder in division of one signed double-word by another. If you do not
2267 define this macro, the default name is used, which is `__moddi3', a function
2268 defined in `libgcc.a'. */
2269 #define MODDI3_LIBCALL "__modll"
2271 /* A C string constant giving the name of the function to call for the
2272 remainder in division of one unsigned full-word by another. If you do not
2273 define this macro, the default name is used, which is `__umoddi3', a
2274 function defined in `libgcc.a'. */
2275 #define UMODDI3_LIBCALL "__umodll"
2277 /* Define this macro as a C statement that declares additional library routines
2278 renames existing ones. `init_optabs' calls this macro after initializing all
2279 the normal library routines. */
2280 #define INIT_TARGET_OPTABS \
2283 add_optab->handlers [(int) DImode].libfunc \
2284 = init_one_libfunc ("__addll"); \
2285 sub_optab->handlers [(int) DImode].libfunc \
2286 = init_one_libfunc ("__subll"); \
2287 and_optab->handlers [(int) DImode].libfunc \
2288 = init_one_libfunc ("__andll"); \
2289 ior_optab->handlers [(int) DImode].libfunc \
2290 = init_one_libfunc ("__orll"); \
2291 xor_optab->handlers [(int) DImode].libfunc \
2292 = init_one_libfunc ("__xorll"); \
2293 one_cmpl_optab->handlers [(int) DImode].libfunc \
2294 = init_one_libfunc ("__notll"); \
2295 add_optab->handlers [(int) SFmode].libfunc \
2296 = init_one_libfunc ("__addf"); \
2297 sub_optab->handlers [(int) SFmode].libfunc \
2298 = init_one_libfunc ("__subf"); \
2299 smul_optab->handlers [(int) SFmode].libfunc \
2300 = init_one_libfunc ("__mulf"); \
2301 sdiv_optab->handlers [(int) SFmode].libfunc \
2302 = init_one_libfunc ("__divf"); \
2303 add_optab->handlers [(int) DFmode].libfunc \
2304 = init_one_libfunc ("__addd"); \
2305 sub_optab->handlers [(int) DFmode].libfunc \
2306 = init_one_libfunc ("__subd"); \
2307 smul_optab->handlers [(int) DFmode].libfunc \
2308 = init_one_libfunc ("__muld"); \
2309 sdiv_optab->handlers [(int) DFmode].libfunc \
2310 = init_one_libfunc ("__divd"); \
2311 fixsfsi_libfunc = init_one_libfunc ("__ftoi"); \
2312 fixunssfsi_libfunc = init_one_libfunc ("__ftoui"); \
2313 fixsfdi_libfunc = init_one_libfunc ("__ftoll"); \
2314 fixunssfdi_libfunc = init_one_libfunc ("__ftoull"); \
2315 fixdfsi_libfunc = init_one_libfunc ("__dtoi"); \
2316 fixunsdfsi_libfunc = init_one_libfunc ("__dtoui"); \
2317 fixdfdi_libfunc = init_one_libfunc ("__dtoll"); \
2318 fixunsdfdi_libfunc = init_one_libfunc ("__dtoull"); \
2319 floatsisf_libfunc = init_one_libfunc ("__itof"); \
2320 floatdisf_libfunc = init_one_libfunc ("__lltof"); \
2321 floatsidf_libfunc = init_one_libfunc ("__itod"); \
2322 floatdidf_libfunc = init_one_libfunc ("__lltod"); \
2323 extendsfdf2_libfunc = init_one_libfunc ("__ftod"); \
2324 truncdfsf2_libfunc = init_one_libfunc ("__dtof"); \
2329 /* Addressing Modes. */
2331 /* A C expression that is 1 if the RTX X is a constant which is a valid
2332 address. On most machines, this can be defined as `CONSTANT_P (X)', but a
2333 few machines are more restrictive in which constant addresses are supported.
2335 `CONSTANT_P' accepts integer-values expressions whose values are not
2336 explicitly known, such as `symbol_ref', `label_ref', and `high' expressions
2337 and `const' arithmetic expressions, in addition to `const_int' and
2338 `const_double' expressions. */
2339 #define CONSTANT_ADDRESS_P(X) CONSTANT_P (X)
2341 /* A number, the maximum number of registers that can appear in a valid memory
2342 address. Note that it is up to you to specify a value equal to the maximum
2343 number that `GO_IF_LEGITIMATE_ADDRESS' would ever accept. */
2344 #define MAX_REGS_PER_ADDRESS 2
2346 /* A C compound statement with a conditional `goto LABEL;' executed if X (an
2347 RTX) is a legitimate memory address on the target machine for a memory
2348 operand of mode MODE.
2350 It usually pays to define several simpler macros to serve as subroutines for
2351 this one. Otherwise it may be too complicated to understand.
2353 This macro must exist in two variants: a strict variant and a non-strict
2354 one. The strict variant is used in the reload pass. It must be defined so
2355 that any pseudo-register that has not been allocated a hard register is
2356 considered a memory reference. In contexts where some kind of register is
2357 required, a pseudo-register with no hard register must be rejected.
2359 The non-strict variant is used in other passes. It must be defined to
2360 accept all pseudo-registers in every context where some kind of register is
2363 Compiler source files that want to use the strict variant of this macro
2364 define the macro `REG_OK_STRICT'. You should use an `#ifdef REG_OK_STRICT'
2365 conditional to define the strict variant in that case and the non-strict
2368 Subroutines to check for acceptable registers for various purposes (one for
2369 base registers, one for index registers, and so on) are typically among the
2370 subroutines used to define `GO_IF_LEGITIMATE_ADDRESS'. Then only these
2371 subroutine macros need have two variants; the higher levels of macros may be
2372 the same whether strict or not.
2374 Normally, constant addresses which are the sum of a `symbol_ref' and an
2375 integer are stored inside a `const' RTX to mark them as constant.
2376 Therefore, there is no need to recognize such sums specifically as
2377 legitimate addresses. Normally you would simply recognize any `const' as
2380 Usually `PRINT_OPERAND_ADDRESS' is not prepared to handle constant sums that
2381 are not marked with `const'. It assumes that a naked `plus' indicates
2382 indexing. If so, then you *must* reject such naked constant sums as
2383 illegitimate addresses, so that none of them will be given to
2384 `PRINT_OPERAND_ADDRESS'.
2386 On some machines, whether a symbolic address is legitimate depends on the
2387 section that the address refers to. On these machines, define the macro
2388 `ENCODE_SECTION_INFO' to store the information into the `symbol_ref', and
2389 then check for it here. When you see a `const', you will have to look
2390 inside it to find the `symbol_ref' in order to determine the section.
2392 The best way to modify the name string is by adding text to the beginning,
2393 with suitable punctuation to prevent any ambiguity. Allocate the new name
2394 in `saveable_obstack'. You will have to modify `ASM_OUTPUT_LABELREF' to
2395 remove and decode the added text and output the name accordingly, and define
2396 `(* targetm.strip_name_encoding)' to access the original name string.
2398 You can check the information stored here into the `symbol_ref' in the
2399 definitions of the macros `GO_IF_LEGITIMATE_ADDRESS' and
2400 `PRINT_OPERAND_ADDRESS'. */
2402 #ifdef REG_OK_STRICT
2403 #define REG_OK_STRICT_P 1
2405 #define REG_OK_STRICT_P 0
2408 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL) \
2411 if (frv_legitimate_address_p (MODE, X, REG_OK_STRICT_P, FALSE)) \
2416 /* A C expression that is nonzero if X (assumed to be a `reg' RTX) is valid for
2417 use as a base register. For hard registers, it should always accept those
2418 which the hardware permits and reject the others. Whether the macro accepts
2419 or rejects pseudo registers must be controlled by `REG_OK_STRICT' as
2420 described above. This usually requires two variant definitions, of which
2421 `REG_OK_STRICT' controls the one actually used. */
2422 #ifdef REG_OK_STRICT
2423 #define REG_OK_FOR_BASE_P(X) GPR_P (REGNO (X))
2425 #define REG_OK_FOR_BASE_P(X) GPR_AP_OR_PSEUDO_P (REGNO (X))
2428 /* A C expression that is nonzero if X (assumed to be a `reg' RTX) is valid for
2429 use as an index register.
2431 The difference between an index register and a base register is that the
2432 index register may be scaled. If an address involves the sum of two
2433 registers, neither one of them scaled, then either one may be labeled the
2434 "base" and the other the "index"; but whichever labeling is used must fit
2435 the machine's constraints of which registers may serve in each capacity.
2436 The compiler will try both labelings, looking for one that is valid, and
2437 will reload one or both registers only if neither labeling works. */
2438 #define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_BASE_P (X)
2440 /* A C compound statement that attempts to replace X with a valid memory
2441 address for an operand of mode MODE. WIN will be a C statement label
2442 elsewhere in the code; the macro definition may use
2444 GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN);
2446 to avoid further processing if the address has become legitimate.
2448 X will always be the result of a call to `break_out_memory_refs', and OLDX
2449 will be the operand that was given to that function to produce X.
2451 The code generated by this macro should not alter the substructure of X. If
2452 it transforms X into a more legitimate form, it should assign X (which will
2453 always be a C variable) a new value.
2455 It is not necessary for this macro to come up with a legitimate address.
2456 The compiler has standard ways of doing so in all cases. In fact, it is
2457 safe for this macro to do nothing. But often a machine-dependent strategy
2458 can generate better code. */
2460 /* On the FRV, we use it to convert small data and pic references into using
2461 the appropriate pointer in the address. */
2462 #define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
2465 rtx newx = frv_legitimize_address (X, OLDX, MODE); \
2475 /* A C statement or compound statement with a conditional `goto LABEL;'
2476 executed if memory address X (an RTX) can have different meanings depending
2477 on the machine mode of the memory reference it is used for or if the address
2478 is valid for some modes but not others.
2480 Autoincrement and autodecrement addresses typically have mode-dependent
2481 effects because the amount of the increment or decrement is the size of the
2482 operand being addressed. Some machines have other mode-dependent addresses.
2483 Many RISC machines have no mode-dependent addresses.
2485 You may assume that ADDR is a valid address for the machine. */
2486 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL)
2488 /* A C expression that is nonzero if X is a legitimate constant for an
2489 immediate operand on the target machine. You can assume that X satisfies
2490 `CONSTANT_P', so you need not check this. In fact, `1' is a suitable
2491 definition for this macro on machines where anything `CONSTANT_P' is valid. */
2492 #define LEGITIMATE_CONSTANT_P(X) frv_legitimate_constant_p (X)
2494 /* The load-and-update commands allow pre-modification in addresses.
2495 The index has to be in a register. */
2496 #define HAVE_PRE_MODIFY_REG 1
2499 /* Returns a mode from class `MODE_CC' to be used when comparison operation
2500 code OP is applied to rtx X and Y. For example, on the SPARC,
2501 `SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a
2502 description of the reason for this definition)
2504 #define SELECT_CC_MODE(OP,X,Y) \
2505 (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \
2506 ? ((OP == EQ || OP == NE) ? CCFPmode : CCFPEmode) \
2507 : ((GET_CODE (X) == PLUS || GET_CODE (X) == MINUS \
2508 || GET_CODE (X) == NEG) \
2509 ? CC_NOOVmode : CCmode))
2511 You need not define this macro if `EXTRA_CC_MODES' is not defined. */
2512 #define SELECT_CC_MODE(OP, X, Y) \
2513 (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \
2515 : (((OP) == LEU || (OP) == GTU || (OP) == LTU || (OP) == GEU) \
2519 /* A C expression whose value is one if it is always safe to reverse a
2520 comparison whose mode is MODE. If `SELECT_CC_MODE' can ever return MODE for
2521 a floating-point inequality comparison, then `REVERSIBLE_CC_MODE (MODE)'
2524 You need not define this macro if it would always returns zero or if the
2525 floating-point format is anything other than `IEEE_FLOAT_FORMAT'. For
2526 example, here is the definition used on the SPARC, where floating-point
2527 inequality comparisons are always given `CCFPEmode':
2529 #define REVERSIBLE_CC_MODE(MODE) ((MODE) != CCFPEmode) */
2531 /* On frv, don't consider floating point comparisons to be reversible. In
2532 theory, fp equality comparisons can be reversible */
2533 #define REVERSIBLE_CC_MODE(MODE) ((MODE) == CCmode || (MODE) == CC_UNSmode)
2535 /* Frv CCR_MODE's are not reversible. */
2536 #define REVERSE_CONDEXEC_PREDICATES_P(x,y) 0
2539 /* Describing Relative Costs of Operations. */
2541 /* A C expression for the cost of moving data from a register in class FROM to
2542 one in class TO. The classes are expressed using the enumeration values
2543 such as `GENERAL_REGS'. A value of 4 is the default; other values are
2544 interpreted relative to that.
2546 It is not required that the cost always equal 2 when FROM is the same as TO;
2547 on some machines it is expensive to move between registers if they are not
2550 If reload sees an insn consisting of a single `set' between two hard
2551 registers, and if `REGISTER_MOVE_COST' applied to their classes returns a
2552 value of 2, reload does not check to ensure that the constraints of the insn
2553 are met. Setting a cost of other than 2 will allow reload to verify that
2554 the constraints are met. You should do this if the `movM' pattern's
2555 constraints do not allow such copying. */
2556 #define REGISTER_MOVE_COST(MODE, FROM, TO) frv_register_move_cost (FROM, TO)
2558 /* A C expression for the cost of moving data of mode M between a register and
2559 memory. A value of 2 is the default; this cost is relative to those in
2560 `REGISTER_MOVE_COST'.
2562 If moving between registers and memory is more expensive than between two
2563 registers, you should define this macro to express the relative cost. */
2564 #define MEMORY_MOVE_COST(M,C,I) 4
2566 /* A C expression for the cost of a branch instruction. A value of 1 is the
2567 default; other values are interpreted relative to that. */
2569 /* Here are additional macros which do not specify precise relative costs, but
2570 only that certain actions are more expensive than GNU CC would ordinarily
2573 /* We used to default the branch cost to 2, but I changed it to 1, to avoid
2574 generating SCC instructions and or/and-ing them together, and then doing the
2575 branch on the result, which collectively generate much worse code. */
2576 #ifndef DEFAULT_BRANCH_COST
2577 #define DEFAULT_BRANCH_COST 1
2580 #define BRANCH_COST frv_branch_cost_int
2582 /* Define this macro as a C expression which is nonzero if accessing less than
2583 a word of memory (i.e. a `char' or a `short') is no faster than accessing a
2584 word of memory, i.e., if such access require more than one instruction or if
2585 there is no difference in cost between byte and (aligned) word loads.
2587 When this macro is not defined, the compiler will access a field by finding
2588 the smallest containing object; when it is defined, a fullword load will be
2589 used if alignment permits. Unless bytes accesses are faster than word
2590 accesses, using word accesses is preferable since it may eliminate
2591 subsequent memory access if subsequent accesses occur to other fields in the
2592 same word of the structure, but to different bytes. */
2593 #define SLOW_BYTE_ACCESS 1
2595 /* Define this macro if it is as good or better to call a constant function
2596 address than to call an address kept in a register. */
2597 #define NO_FUNCTION_CSE
2599 /* Define this macro if it is as good or better for a function to call itself
2600 with an explicit address than to call an address kept in a register. */
2601 #define NO_RECURSIVE_FUNCTION_CSE
2604 /* Dividing the output into sections. */
2606 /* A C expression whose value is a string containing the assembler operation
2607 that should precede instructions and read-only data. Normally `".text"' is
2609 #define TEXT_SECTION_ASM_OP "\t.text"
2611 /* A C expression whose value is a string containing the assembler operation to
2612 identify the following data as writable initialized data. Normally
2613 `".data"' is right. */
2614 #define DATA_SECTION_ASM_OP "\t.data"
2616 /* If defined, a C expression whose value is a string containing the
2617 assembler operation to identify the following data as
2618 uninitialized global data. If not defined, and neither
2619 `ASM_OUTPUT_BSS' nor `ASM_OUTPUT_ALIGNED_BSS' are defined,
2620 uninitialized global data will be output in the data section if
2621 `-fno-common' is passed, otherwise `ASM_OUTPUT_COMMON' will be
2623 #define BSS_SECTION_ASM_OP "\t.section .bss,\"aw\""
2625 /* Short Data Support */
2626 #define SDATA_SECTION_ASM_OP "\t.section .sdata,\"aw\""
2627 #define SBSS_SECTION_ASM_OP "\t.section .sbss,\"aw\""
2629 /* On svr4, we *do* have support for the .init and .fini sections, and we
2630 can put stuff in there to be executed before and after `main'. We let
2631 crtstuff.c and other files know this by defining the following symbols.
2632 The definitions say how to change sections to the .init and .fini
2633 sections. This is the same for all known svr4 assemblers.
2635 The standard System V.4 macros will work, but they look ugly in the
2636 assembly output, so redefine them. */
2638 #undef INIT_SECTION_ASM_OP
2639 #undef FINI_SECTION_ASM_OP
2640 #define INIT_SECTION_ASM_OP "\t.section .init,\"ax\""
2641 #define FINI_SECTION_ASM_OP "\t.section .fini,\"ax\""
2643 #undef CTORS_SECTION_ASM_OP
2644 #undef DTORS_SECTION_ASM_OP
2645 #define CTORS_SECTION_ASM_OP "\t.section\t.ctors,\"a\""
2646 #define DTORS_SECTION_ASM_OP "\t.section\t.dtors,\"a\""
2648 /* A C expression whose value is a string containing the assembler operation to
2649 switch to the fixup section that records all initialized pointers in a -fpic
2650 program so they can be changed program startup time if the program is loaded
2651 at a different address than linked for. */
2652 #define FIXUP_SECTION_ASM_OP "\t.section .rofixup,\"a\""
2654 /* A list of names for sections other than the standard two, which are
2655 `in_text' and `in_data'. You need not define this macro
2656 on a system with no other sections (that GCC needs to use). */
2657 #undef EXTRA_SECTIONS
2658 #define EXTRA_SECTIONS in_sdata, in_sbss, in_const, in_fixup
2660 /* One or more functions to be defined in "varasm.c". These
2661 functions should do jobs analogous to those of `text_section' and
2662 `data_section', for your additional sections. Do not define this
2663 macro if you do not define `EXTRA_SECTIONS'. */
2664 #undef EXTRA_SECTION_FUNCTIONS
2665 #define EXTRA_SECTION_FUNCTIONS \
2666 SDATA_SECTION_FUNCTION \
2667 SBSS_SECTION_FUNCTION \
2668 FIXUP_SECTION_FUNCTION
2670 #define SDATA_SECTION_FUNCTION \
2674 if (in_section != in_sdata) \
2676 fprintf (asm_out_file, "%s\n", SDATA_SECTION_ASM_OP); \
2677 in_section = in_sdata; \
2681 #define SBSS_SECTION_FUNCTION \
2685 if (in_section != in_sbss) \
2687 fprintf (asm_out_file, "%s\n", SBSS_SECTION_ASM_OP); \
2688 in_section = in_sbss; \
2692 #define FIXUP_SECTION_FUNCTION \
2696 if (in_section != in_fixup) \
2698 fprintf (asm_out_file, "%s\n", FIXUP_SECTION_ASM_OP); \
2699 in_section = in_fixup; \
2703 /* Position Independent Code. */
2705 /* A C expression that is nonzero if X is a legitimate immediate operand on the
2706 target machine when generating position independent code. You can assume
2707 that X satisfies `CONSTANT_P', so you need not check this. You can also
2708 assume FLAG_PIC is true, so you need not check it either. You need not
2709 define this macro if all constants (including `SYMBOL_REF') can be immediate
2710 operands when generating position independent code. */
2711 #define LEGITIMATE_PIC_OPERAND_P(X) \
2712 ( GET_CODE (X) == CONST_INT \
2713 || GET_CODE (X) == CONST_DOUBLE \
2714 || (GET_CODE (X) == HIGH && GET_CODE (XEXP (X, 0)) == CONST_INT) \
2715 || GET_CODE (X) == CONSTANT_P_RTX)
2718 /* The Overall Framework of an Assembler File. */
2720 /* A C string constant describing how to begin a comment in the target
2721 assembler language. The compiler assumes that the comment will end at the
2723 #define ASM_COMMENT_START ";"
2725 /* A C string constant for text to be output before each `asm' statement or
2726 group of consecutive ones. Normally this is `"#APP"', which is a comment
2727 that has no effect on most assemblers but tells the GNU assembler that it
2728 must check the lines that follow for all valid assembler constructs. */
2729 #define ASM_APP_ON "#APP\n"
2731 /* A C string constant for text to be output after each `asm' statement or
2732 group of consecutive ones. Normally this is `"#NO_APP"', which tells the
2733 GNU assembler to resume making the time-saving assumptions that are valid
2734 for ordinary compiler output. */
2735 #define ASM_APP_OFF "#NO_APP\n"
2738 /* Output of Data. */
2740 /* This is how to output a label to dwarf/dwarf2. */
2741 #define ASM_OUTPUT_DWARF_ADDR(STREAM, LABEL) \
2743 fprintf (STREAM, "\t.picptr\t"); \
2744 assemble_name (STREAM, LABEL); \
2747 /* Whether to emit the gas specific dwarf2 line number support. */
2748 #define DWARF2_ASM_LINE_DEBUG_INFO (TARGET_DEBUG_LOC)
2750 /* Output of Uninitialized Variables. */
2752 /* A C statement (sans semicolon) to output to the stdio stream STREAM the
2753 assembler definition of a local-common-label named NAME whose size is SIZE
2754 bytes. The variable ROUNDED is the size rounded up to whatever alignment
2757 Use the expression `assemble_name (STREAM, NAME)' to output the name itself;
2758 before and after that, output the additional assembler syntax for defining
2759 the name, and a newline.
2761 This macro controls how the assembler definitions of uninitialized static
2762 variables are output. */
2763 #undef ASM_OUTPUT_LOCAL
2765 /* Like `ASM_OUTPUT_LOCAL' except takes the required alignment as a separate,
2766 explicit argument. If you define this macro, it is used in place of
2767 `ASM_OUTPUT_LOCAL', and gives you more flexibility in handling the required
2768 alignment of the variable. The alignment is specified as the number of
2771 Defined in svr4.h. */
2772 #undef ASM_OUTPUT_ALIGNED_LOCAL
2774 /* This is for final.c, because it is used by ASM_DECLARE_OBJECT_NAME. */
2775 extern int size_directive_output;
2777 /* Like `ASM_OUTPUT_ALIGNED_LOCAL' except that it takes an additional
2778 parameter - the DECL of variable to be output, if there is one.
2779 This macro can be called with DECL == NULL_TREE. If you define
2780 this macro, it is used in place of `ASM_OUTPUT_LOCAL' and
2781 `ASM_OUTPUT_ALIGNED_LOCAL', and gives you more flexibility in
2782 handling the destination of the variable. */
2783 #undef ASM_OUTPUT_ALIGNED_DECL_LOCAL
2784 #define ASM_OUTPUT_ALIGNED_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGN) \
2786 if ((SIZE) > 0 && (SIZE) <= g_switch_value) \
2790 ASM_OUTPUT_ALIGN (STREAM, floor_log2 ((ALIGN) / BITS_PER_UNIT)); \
2791 ASM_DECLARE_OBJECT_NAME (STREAM, NAME, DECL); \
2792 ASM_OUTPUT_SKIP (STREAM, (SIZE) ? (SIZE) : 1); \
2796 /* Output and Generation of Labels. */
2798 /* A C statement (sans semicolon) to output to the stdio stream STREAM the
2799 assembler definition of a label named NAME. Use the expression
2800 `assemble_name (STREAM, NAME)' to output the name itself; before and after
2801 that, output the additional assembler syntax for defining the name, and a
2803 #define ASM_OUTPUT_LABEL(STREAM, NAME) \
2805 assemble_name (STREAM, NAME); \
2806 fputs (":\n", STREAM); \
2809 /* Globalizing directive for a label. */
2810 #define GLOBAL_ASM_OP "\t.globl "
2812 /* A C statement to store into the string STRING a label whose name is made
2813 from the string PREFIX and the number NUM.
2815 This string, when output subsequently by `assemble_name', should produce the
2816 output that `(*targetm.asm_out.internal_label)' would produce with the same PREFIX
2819 If the string begins with `*', then `assemble_name' will output the rest of
2820 the string unchanged. It is often convenient for
2821 `ASM_GENERATE_INTERNAL_LABEL' to use `*' in this way. If the string doesn't
2822 start with `*', then `ASM_OUTPUT_LABELREF' gets to output the string, and
2823 may change it. (Of course, `ASM_OUTPUT_LABELREF' is also part of your
2824 machine description, so you should know what it does on your machine.)
2826 Defined in svr4.h. */
2827 #undef ASM_GENERATE_INTERNAL_LABEL
2828 #define ASM_GENERATE_INTERNAL_LABEL(LABEL, PREFIX, NUM) \
2830 sprintf (LABEL, "*.%s%ld", PREFIX, (long)NUM); \
2834 /* Macros Controlling Initialization Routines. */
2836 /* If defined, a C string constant for the assembler operation to identify the
2837 following data as initialization code. If not defined, GNU CC will assume
2838 such a section does not exist. When you are using special sections for
2839 initialization and termination functions, this macro also controls how
2840 `crtstuff.c' and `libgcc2.c' arrange to run the initialization functions.
2842 Defined in svr4.h. */
2843 #undef INIT_SECTION_ASM_OP
2845 /* If defined, `main' will call `__main' despite the presence of
2846 `INIT_SECTION_ASM_OP'. This macro should be defined for systems where the
2847 init section is not actually run automatically, but is still useful for
2848 collecting the lists of constructors and destructors. */
2849 #define INVOKE__main
2851 /* Output of Assembler Instructions. */
2853 /* A C initializer containing the assembler's names for the machine registers,
2854 each one as a C string constant. This is what translates register numbers
2855 in the compiler into assembler language. */
2856 #define REGISTER_NAMES \
2858 "gr0", "sp", "fp", "gr3", "gr4", "gr5", "gr6", "gr7", \
2859 "gr8", "gr9", "gr10", "gr11", "gr12", "gr13", "gr14", "gr15", \
2860 "gr16", "gr17", "gr18", "gr19", "gr20", "gr21", "gr22", "gr23", \
2861 "gr24", "gr25", "gr26", "gr27", "gr28", "gr29", "gr30", "gr31", \
2862 "gr32", "gr33", "gr34", "gr35", "gr36", "gr37", "gr38", "gr39", \
2863 "gr40", "gr41", "gr42", "gr43", "gr44", "gr45", "gr46", "gr47", \
2864 "gr48", "gr49", "gr50", "gr51", "gr52", "gr53", "gr54", "gr55", \
2865 "gr56", "gr57", "gr58", "gr59", "gr60", "gr61", "gr62", "gr63", \
2867 "fr0", "fr1", "fr2", "fr3", "fr4", "fr5", "fr6", "fr7", \
2868 "fr8", "fr9", "fr10", "fr11", "fr12", "fr13", "fr14", "fr15", \
2869 "fr16", "fr17", "fr18", "fr19", "fr20", "fr21", "fr22", "fr23", \
2870 "fr24", "fr25", "fr26", "fr27", "fr28", "fr29", "fr30", "fr31", \
2871 "fr32", "fr33", "fr34", "fr35", "fr36", "fr37", "fr38", "fr39", \
2872 "fr40", "fr41", "fr42", "fr43", "fr44", "fr45", "fr46", "fr47", \
2873 "fr48", "fr49", "fr50", "fr51", "fr52", "fr53", "fr54", "fr55", \
2874 "fr56", "fr57", "fr58", "fr59", "fr60", "fr61", "fr62", "fr63", \
2876 "fcc0", "fcc1", "fcc2", "fcc3", "icc0", "icc1", "icc2", "icc3", \
2877 "cc0", "cc1", "cc2", "cc3", "cc4", "cc5", "cc6", "cc7", \
2878 "acc0", "acc1", "acc2", "acc3", "acc4", "acc5", "acc6", "acc7", \
2879 "accg0","accg1","accg2","accg3","accg4","accg5","accg6","accg7", \
2883 /* Define this macro if you are using an unusual assembler that
2884 requires different names for the machine instructions.
2886 The definition is a C statement or statements which output an
2887 assembler instruction opcode to the stdio stream STREAM. The
2888 macro-operand PTR is a variable of type `char *' which points to
2889 the opcode name in its "internal" form--the form that is written
2890 in the machine description. The definition should output the
2891 opcode name to STREAM, performing any translation you desire, and
2892 increment the variable PTR to point at the end of the opcode so
2893 that it will not be output twice.
2895 In fact, your macro definition may process less than the entire
2896 opcode name, or more than the opcode name; but if you want to
2897 process text that includes `%'-sequences to substitute operands,
2898 you must take care of the substitution yourself. Just be sure to
2899 increment PTR over whatever text should not be output normally.
2901 If you need to look at the operand values, they can be found as the
2902 elements of `recog_operand'.
2904 If the macro definition does nothing, the instruction is output in
2907 #define ASM_OUTPUT_OPCODE(STREAM, PTR)\
2908 (PTR) = frv_asm_output_opcode (STREAM, PTR)
2910 /* If defined, a C statement to be executed just prior to the output
2911 of assembler code for INSN, to modify the extracted operands so
2912 they will be output differently.
2914 Here the argument OPVEC is the vector containing the operands
2915 extracted from INSN, and NOPERANDS is the number of elements of
2916 the vector which contain meaningful data for this insn. The
2917 contents of this vector are what will be used to convert the insn
2918 template into assembler code, so you can change the assembler
2919 output by changing the contents of the vector.
2921 This macro is useful when various assembler syntaxes share a single
2922 file of instruction patterns; by defining this macro differently,
2923 you can cause a large class of instructions to be output
2924 differently (such as with rearranged operands). Naturally,
2925 variations in assembler syntax affecting individual insn patterns
2926 ought to be handled by writing conditional output routines in
2929 If this macro is not defined, it is equivalent to a null statement. */
2931 #define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS)\
2932 frv_final_prescan_insn (INSN, OPVEC, NOPERANDS)
2935 /* A C compound statement to output to stdio stream STREAM the assembler syntax
2936 for an instruction operand X. X is an RTL expression.
2938 CODE is a value that can be used to specify one of several ways of printing
2939 the operand. It is used when identical operands must be printed differently
2940 depending on the context. CODE comes from the `%' specification that was
2941 used to request printing of the operand. If the specification was just
2942 `%DIGIT' then CODE is 0; if the specification was `%LTR DIGIT' then CODE is
2943 the ASCII code for LTR.
2945 If X is a register, this macro should print the register's name. The names
2946 can be found in an array `reg_names' whose type is `char *[]'. `reg_names'
2947 is initialized from `REGISTER_NAMES'.
2949 When the machine description has a specification `%PUNCT' (a `%' followed by
2950 a punctuation character), this macro is called with a null pointer for X and
2951 the punctuation character for CODE. */
2952 #define PRINT_OPERAND(STREAM, X, CODE) frv_print_operand (STREAM, X, CODE)
2954 /* A C expression which evaluates to true if CODE is a valid punctuation
2955 character for use in the `PRINT_OPERAND' macro. If
2956 `PRINT_OPERAND_PUNCT_VALID_P' is not defined, it means that no punctuation
2957 characters (except for the standard one, `%') are used in this way. */
2959 # == hint operand -- always zero for now
2960 @ == small data base register (gr16)
2961 ~ == pic register (gr17)
2962 * == temporary integer CCR register (cr3)
2963 & == temporary integer ICC register (icc3) */
2964 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
2965 ((CODE) == '.' || (CODE) == '#' || (CODE) == '@' || (CODE) == '~' \
2966 || (CODE) == '*' || (CODE) == '&')
2968 /* A C compound statement to output to stdio stream STREAM the assembler syntax
2969 for an instruction operand that is a memory reference whose address is X. X
2970 is an RTL expression.
2972 On some machines, the syntax for a symbolic address depends on the section
2973 that the address refers to. On these machines, define the macro
2974 `ENCODE_SECTION_INFO' to store the information into the `symbol_ref', and
2975 then check for it here.
2977 This declaration must be present. */
2978 #define PRINT_OPERAND_ADDRESS(STREAM, X) frv_print_operand_address (STREAM, X)
2980 /* If defined, C string expressions to be used for the `%R', `%L', `%U', and
2981 `%I' options of `asm_fprintf' (see `final.c'). These are useful when a
2982 single `md' file must support multiple assembler formats. In that case, the
2983 various `tm.h' files can define these macros differently.
2985 USER_LABEL_PREFIX is defined in svr4.h. */
2986 #undef USER_LABEL_PREFIX
2987 #define USER_LABEL_PREFIX ""
2988 #define REGISTER_PREFIX ""
2989 #define LOCAL_LABEL_PREFIX "."
2990 #define IMMEDIATE_PREFIX "#"
2993 /* Output of dispatch tables. */
2995 /* This macro should be provided on machines where the addresses in a dispatch
2996 table are relative to the table's own address.
2998 The definition should be a C statement to output to the stdio stream STREAM
2999 an assembler pseudo-instruction to generate a difference between two labels.
3000 VALUE and REL are the numbers of two internal labels. The definitions of
3001 these labels are output using `(*targetm.asm_out.internal_label)', and they must be
3002 printed in the same way here. For example,
3004 fprintf (STREAM, "\t.word L%d-L%d\n", VALUE, REL) */
3005 #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
3006 fprintf (STREAM, "\t.word .L%d-.L%d\n", VALUE, REL)
3008 /* This macro should be provided on machines where the addresses in a dispatch
3011 The definition should be a C statement to output to the stdio stream STREAM
3012 an assembler pseudo-instruction to generate a reference to a label. VALUE
3013 is the number of an internal label whose definition is output using
3014 `(*targetm.asm_out.internal_label)'. For example,
3016 fprintf (STREAM, "\t.word L%d\n", VALUE) */
3017 #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
3018 fprintf (STREAM, "\t.word .L%d\n", VALUE)
3020 /* Define this if the label before a jump-table needs to be output specially.
3021 The first three arguments are the same as for `(*targetm.asm_out.internal_label)';
3022 the fourth argument is the jump-table which follows (a `jump_insn'
3023 containing an `addr_vec' or `addr_diff_vec').
3025 This feature is used on system V to output a `swbeg' statement for the
3028 If this macro is not defined, these labels are output with
3029 `(*targetm.asm_out.internal_label)'.
3031 Defined in svr4.h. */
3032 /* When generating embedded PIC or mips16 code we want to put the jump
3033 table in the .text section. In all other cases, we want to put the
3034 jump table in the .rdata section. Unfortunately, we can't use
3035 JUMP_TABLES_IN_TEXT_SECTION, because it is not conditional.
3036 Instead, we use ASM_OUTPUT_CASE_LABEL to switch back to the .text
3037 section if appropriate. */
3039 #undef ASM_OUTPUT_CASE_LABEL
3040 #define ASM_OUTPUT_CASE_LABEL(STREAM, PREFIX, NUM, TABLE) \
3043 function_section (current_function_decl); \
3044 (*targetm.asm_out.internal_label) (STREAM, PREFIX, NUM); \
3047 /* Define this to determine whether case statement labels are relative to
3048 the start of the case statement or not. */
3050 #define CASE_VECTOR_PC_RELATIVE (flag_pic)
3053 /* Assembler Commands for Exception Regions. */
3055 /* Define this macro to 0 if your target supports DWARF 2 frame unwind
3056 information, but it does not yet work with exception handling. Otherwise,
3057 if your target supports this information (if it defines
3058 `INCOMING_RETURN_ADDR_RTX' and either `UNALIGNED_INT_ASM_OP' or
3059 `OBJECT_FORMAT_ELF'), GCC will provide a default definition of 1.
3061 If this macro is defined to 1, the DWARF 2 unwinder will be the default
3062 exception handling mechanism; otherwise, setjmp/longjmp will be used by
3065 If this macro is defined to anything, the DWARF 2 unwinder will be used
3066 instead of inline unwinders and __unwind_function in the non-setjmp case. */
3067 #define DWARF2_UNWIND_INFO 1
3069 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LR_REGNO)
3071 /* Assembler Commands for Alignment. */
3073 /* A C statement to output to the stdio stream STREAM an assembler instruction
3074 to advance the location counter by NBYTES bytes. Those bytes should be zero
3075 when loaded. NBYTES will be a C expression of type `int'.
3077 Defined in svr4.h. */
3078 #undef ASM_OUTPUT_SKIP
3079 #define ASM_OUTPUT_SKIP(STREAM, NBYTES) \
3080 fprintf (STREAM, "\t.zero\t%u\n", (NBYTES))
3082 /* A C statement to output to the stdio stream STREAM an assembler command to
3083 advance the location counter to a multiple of 2 to the POWER bytes. POWER
3084 will be a C expression of type `int'. */
3085 #define ASM_OUTPUT_ALIGN(STREAM, POWER) \
3086 fprintf ((STREAM), "\t.p2align %d\n", (POWER))
3089 /* Macros Affecting all Debug Formats. */
3091 /* A C expression that returns the DBX register number for the compiler
3092 register number REGNO. In simple cases, the value of this expression may be
3093 REGNO itself. But sometimes there are some registers that the compiler
3094 knows about and DBX does not, or vice versa. In such cases, some register
3095 may need to have one number in the compiler and another for DBX.
3097 If two registers have consecutive numbers inside GNU CC, and they can be
3098 used as a pair to hold a multiword value, then they *must* have consecutive
3099 numbers after renumbering with `DBX_REGISTER_NUMBER'. Otherwise, debuggers
3100 will be unable to access such a pair, because they expect register pairs to
3101 be consecutive in their own numbering scheme.
3103 If you find yourself defining `DBX_REGISTER_NUMBER' in way that does not
3104 preserve register pairs, then what you must do instead is redefine the
3105 actual register numbering scheme.
3107 This declaration is required. */
3108 #define DBX_REGISTER_NUMBER(REGNO) (REGNO)
3110 /* A C expression that returns the type of debugging output GNU CC produces
3111 when the user specifies `-g' or `-ggdb'. Define this if you have arranged
3112 for GNU CC to support more than one format of debugging output. Currently,
3113 the allowable values are `DBX_DEBUG', `SDB_DEBUG', `DWARF_DEBUG',
3114 `DWARF2_DEBUG', and `XCOFF_DEBUG'.
3116 The value of this macro only affects the default debugging output; the user
3117 can always get a specific type of output by using `-gstabs', `-gcoff',
3118 `-gdwarf-1', `-gdwarf-2', or `-gxcoff'.
3120 Defined in svr4.h. */
3121 #undef PREFERRED_DEBUGGING_TYPE
3122 #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
3124 /* Miscellaneous Parameters. */
3126 /* Define this if you have defined special-purpose predicates in the file
3127 `MACHINE.c'. This macro is called within an initializer of an array of
3128 structures. The first field in the structure is the name of a predicate and
3129 the second field is an array of rtl codes. For each predicate, list all rtl
3130 codes that can be in expressions matched by the predicate. The list should
3131 have a trailing comma. Here is an example of two entries in the list for a
3132 typical RISC machine:
3134 #define PREDICATE_CODES \
3135 {"gen_reg_rtx_operand", {SUBREG, REG}}, \
3136 {"reg_or_short_cint_operand", {SUBREG, REG, CONST_INT}},
3138 Defining this macro does not affect the generated code (however, incorrect
3139 definitions that omit an rtl code that may be matched by the predicate can
3140 cause the compiler to malfunction). Instead, it allows the table built by
3141 `genrecog' to be more compact and efficient, thus speeding up the compiler.
3142 The most important predicates to include in the list specified by this macro
3143 are thoses used in the most insn patterns. */
3144 #define PREDICATE_CODES \
3145 { "integer_register_operand", { REG, SUBREG }}, \
3146 { "frv_load_operand", { REG, SUBREG, MEM }}, \
3147 { "gpr_no_subreg_operand", { REG }}, \
3148 { "gpr_or_fpr_operand", { REG, SUBREG }}, \
3149 { "gpr_or_int12_operand", { REG, SUBREG, CONST_INT }}, \
3150 { "gpr_fpr_or_int12_operand", { REG, SUBREG, CONST_INT }}, \
3151 { "gpr_or_int10_operand", { REG, SUBREG, CONST_INT }}, \
3152 { "gpr_or_int_operand", { REG, SUBREG, CONST_INT }}, \
3153 { "move_source_operand", { REG, SUBREG, CONST_INT, MEM, \
3154 CONST_DOUBLE, CONST, \
3155 SYMBOL_REF, LABEL_REF }}, \
3156 { "move_destination_operand", { REG, SUBREG, MEM }}, \
3157 { "condexec_source_operand", { REG, SUBREG, CONST_INT, MEM, \
3159 { "condexec_dest_operand", { REG, SUBREG, MEM }}, \
3160 { "reg_or_0_operand", { REG, SUBREG, CONST_INT }}, \
3161 { "lr_operand", { REG }}, \
3162 { "gpr_or_memory_operand", { REG, SUBREG, MEM }}, \
3163 { "fpr_or_memory_operand", { REG, SUBREG, MEM }}, \
3164 { "int12_operand", { CONST_INT }}, \
3165 { "int_2word_operand", { CONST_INT, CONST_DOUBLE, \
3166 SYMBOL_REF, LABEL_REF, CONST }}, \
3167 { "pic_register_operand", { REG }}, \
3168 { "pic_symbolic_operand", { SYMBOL_REF, LABEL_REF, CONST }}, \
3169 { "small_data_register_operand", { REG }}, \
3170 { "small_data_symbolic_operand", { SYMBOL_REF, CONST }}, \
3171 { "icc_operand", { REG }}, \
3172 { "fcc_operand", { REG }}, \
3173 { "cc_operand", { REG }}, \
3174 { "icr_operand", { REG }}, \
3175 { "fcr_operand", { REG }}, \
3176 { "cr_operand", { REG }}, \
3177 { "fpr_operand", { REG, SUBREG }}, \
3178 { "even_reg_operand", { REG, SUBREG }}, \
3179 { "odd_reg_operand", { REG, SUBREG }}, \
3180 { "even_gpr_operand", { REG, SUBREG }}, \
3181 { "odd_gpr_operand", { REG, SUBREG }}, \
3182 { "quad_fpr_operand", { REG, SUBREG }}, \
3183 { "even_fpr_operand", { REG, SUBREG }}, \
3184 { "odd_fpr_operand", { REG, SUBREG }}, \
3185 { "dbl_memory_one_insn_operand", { MEM }}, \
3186 { "dbl_memory_two_insn_operand", { MEM }}, \
3187 { "call_operand", { REG, SUBREG, PLUS, CONST_INT, \
3188 SYMBOL_REF, LABEL_REF, CONST }}, \
3189 { "upper_int16_operand", { CONST_INT }}, \
3190 { "uint16_operand", { CONST_INT }}, \
3191 { "relational_operator", { EQ, NE, LE, LT, GE, GT, \
3192 LEU, LTU, GEU, GTU }}, \
3193 { "signed_relational_operator", { EQ, NE, LE, LT, GE, GT }}, \
3194 { "unsigned_relational_operator", { LEU, LTU, GEU, GTU }}, \
3195 { "float_relational_operator", { EQ, NE, LE, LT, GE, GT }}, \
3196 { "ccr_eqne_operator", { EQ, NE }}, \
3197 { "minmax_operator", { SMIN, SMAX, UMIN, UMAX }}, \
3198 { "condexec_si_binary_operator", { PLUS, MINUS, AND, IOR, XOR, \
3199 ASHIFT, ASHIFTRT, LSHIFTRT }}, \
3200 { "condexec_si_divide_operator", { DIV, UDIV }}, \
3201 { "condexec_si_unary_operator", { NOT, NEG }}, \
3202 { "condexec_sf_binary_operator", { PLUS, MINUS, MULT, DIV }}, \
3203 { "condexec_sf_unary_operator", { ABS, NEG, SQRT }}, \
3204 { "intop_compare_operator", { PLUS, MINUS, AND, IOR, XOR, \
3205 ASHIFT, ASHIFTRT, LSHIFTRT }}, \
3206 { "condexec_intop_cmp_operator", { PLUS, MINUS, AND, IOR, XOR, \
3207 ASHIFT, ASHIFTRT, LSHIFTRT }}, \
3208 { "fpr_or_int6_operand", { REG, SUBREG, CONST_INT }}, \
3209 { "int6_operand", { CONST_INT }}, \
3210 { "int5_operand", { CONST_INT }}, \
3211 { "uint5_operand", { CONST_INT }}, \
3212 { "uint4_operand", { CONST_INT }}, \
3213 { "uint1_operand", { CONST_INT }}, \
3214 { "acc_operand", { REG, SUBREG }}, \
3215 { "even_acc_operand", { REG, SUBREG }}, \
3216 { "quad_acc_operand", { REG, SUBREG }}, \
3217 { "accg_operand", { REG, SUBREG }},
3219 /* An alias for a machine mode name. This is the machine mode that elements of
3220 a jump-table should have. */
3221 #define CASE_VECTOR_MODE SImode
3223 /* Define this macro if operations between registers with integral mode smaller
3224 than a word are always performed on the entire register. Most RISC machines
3225 have this property and most CISC machines do not. */
3226 #define WORD_REGISTER_OPERATIONS
3228 /* Define this macro to be a C expression indicating when insns that read
3229 memory in MODE, an integral mode narrower than a word, set the bits outside
3230 of MODE to be either the sign-extension or the zero-extension of the data
3231 read. Return `SIGN_EXTEND' for values of MODE for which the insn
3232 sign-extends, `ZERO_EXTEND' for which it zero-extends, and `NIL' for other
3235 This macro is not called with MODE non-integral or with a width greater than
3236 or equal to `BITS_PER_WORD', so you may return any value in this case. Do
3237 not define this macro if it would always return `NIL'. On machines where
3238 this macro is defined, you will normally define it as the constant
3239 `SIGN_EXTEND' or `ZERO_EXTEND'. */
3240 #define LOAD_EXTEND_OP(MODE) SIGN_EXTEND
3242 /* Define if loading short immediate values into registers sign extends. */
3243 #define SHORT_IMMEDIATES_SIGN_EXTEND
3245 /* The maximum number of bytes that a single instruction can move quickly from
3246 memory to memory. */
3249 /* A C expression which is nonzero if on this machine it is safe to "convert"
3250 an integer of INPREC bits to one of OUTPREC bits (where OUTPREC is smaller
3251 than INPREC) by merely operating on it as if it had only OUTPREC bits.
3253 On many machines, this expression can be 1.
3255 When `TRULY_NOOP_TRUNCATION' returns 1 for a pair of sizes for modes for
3256 which `MODES_TIEABLE_P' is 0, suboptimal code can result. If this is the
3257 case, making `TRULY_NOOP_TRUNCATION' return 0 in such cases may improve
3259 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
3261 /* An alias for the machine mode for pointers. On most machines, define this
3262 to be the integer mode corresponding to the width of a hardware pointer;
3263 `SImode' on 32-bit machine or `DImode' on 64-bit machines. On some machines
3264 you must define this to be one of the partial integer modes, such as
3267 The width of `Pmode' must be at least as large as the value of
3268 `POINTER_SIZE'. If it is not equal, you must define the macro
3269 `POINTERS_EXTEND_UNSIGNED' to specify how pointers are extended to `Pmode'. */
3270 #define Pmode SImode
3272 /* An alias for the machine mode used for memory references to functions being
3273 called, in `call' RTL expressions. On most machines this should be
3275 #define FUNCTION_MODE QImode
3277 /* Define this macro to handle System V style pragmas: #pragma pack and
3278 #pragma weak. Note, #pragma weak will only be supported if SUPPORT_WEAK is
3281 Defined in svr4.h. */
3282 #define HANDLE_SYSV_PRAGMA 1
3284 /* A C expression for the maximum number of instructions to execute via
3285 conditional execution instructions instead of a branch. A value of
3286 BRANCH_COST+1 is the default if the machine does not use
3287 cc0, and 1 if it does use cc0. */
3288 #define MAX_CONDITIONAL_EXECUTE frv_condexec_insns
3290 /* Default value of MAX_CONDITIONAL_EXECUTE if no -mcond-exec-insns= */
3291 #define DEFAULT_CONDEXEC_INSNS 8
3293 /* A C expression to modify the code described by the conditional if
3294 information CE_INFO, possibly updating the tests in TRUE_EXPR, and
3295 FALSE_EXPR for converting if-then and if-then-else code to conditional
3296 instructions. Set either TRUE_EXPR or FALSE_EXPR to a null pointer if the
3297 tests cannot be converted. */
3298 #define IFCVT_MODIFY_TESTS(CE_INFO, TRUE_EXPR, FALSE_EXPR) \
3299 frv_ifcvt_modify_tests (CE_INFO, &TRUE_EXPR, &FALSE_EXPR)
3301 /* A C expression to modify the code described by the conditional if
3302 information CE_INFO, for the basic block BB, possibly updating the tests in
3303 TRUE_EXPR, and FALSE_EXPR for converting the && and || parts of if-then or
3304 if-then-else code to conditional instructions. OLD_TRUE and OLD_FALSE are
3305 the previous tests. Set either TRUE_EXPR or FALSE_EXPR to a null pointer if
3306 the tests cannot be converted. */
3307 #define IFCVT_MODIFY_MULTIPLE_TESTS(CE_INFO, BB, TRUE_EXPR, FALSE_EXPR) \
3308 frv_ifcvt_modify_multiple_tests (CE_INFO, BB, &TRUE_EXPR, &FALSE_EXPR)
3310 /* A C expression to modify the code described by the conditional if
3311 information CE_INFO with the new PATTERN in INSN. If PATTERN is a null
3312 pointer after the IFCVT_MODIFY_INSN macro executes, it is assumed that that
3313 insn cannot be converted to be executed conditionally. */
3314 #define IFCVT_MODIFY_INSN(CE_INFO, PATTERN, INSN) \
3315 (PATTERN) = frv_ifcvt_modify_insn (CE_INFO, PATTERN, INSN)
3317 /* A C expression to perform any final machine dependent modifications in
3318 converting code to conditional execution in the code described by the
3319 conditional if information CE_INFO. */
3320 #define IFCVT_MODIFY_FINAL(CE_INFO) frv_ifcvt_modify_final (CE_INFO)
3322 /* A C expression to cancel any machine dependent modifications in converting
3323 code to conditional execution in the code described by the conditional if
3324 information CE_INFO. */
3325 #define IFCVT_MODIFY_CANCEL(CE_INFO) frv_ifcvt_modify_cancel (CE_INFO)
3327 /* Initialize the extra fields provided by IFCVT_EXTRA_FIELDS. */
3328 #define IFCVT_INIT_EXTRA_FIELDS(CE_INFO) frv_ifcvt_init_extra_fields (CE_INFO)
3330 /* Indicate how many instructions can be issued at the same time. */
3331 #define ISSUE_RATE \
3332 (! TARGET_PACK ? 1 \
3333 : (frv_cpu_type == FRV_CPU_GENERIC \
3334 || frv_cpu_type == FRV_CPU_FR500 \
3335 || frv_cpu_type == FRV_CPU_TOMCAT) ? 4 \
3336 : frv_cpu_type == FRV_CPU_FR400 ? 2 : 1)
3338 /* Set and clear whether this insn begins a VLIW insn. */
3339 #define CLEAR_VLIW_START(INSN) PUT_MODE (INSN, VOIDmode)
3340 #define SET_VLIW_START(INSN) PUT_MODE (INSN, TImode)
3342 /* The definition of the following macro results in that the 2nd jump
3343 optimization (after the 2nd insn scheduling) is minimal. It is
3344 necessary to define when start cycle marks of insns (TImode is used
3345 for this) is used for VLIW insn packing. Some jump optimizations
3346 make such marks invalid. These marks are corrected for some
3347 (minimal) optimizations. ??? Probably the macro is temporary.
3348 Final solution could making the 2nd jump optimizations before the
3349 2nd instruction scheduling or corrections of the marks for all jump
3350 optimizations. Although some jump optimizations are actually
3351 deoptimizations for VLIW (super-scalar) processors. */
3353 #define MINIMAL_SECOND_JUMP_OPTIMIZATION
3355 /* Return true if parallel operations are expected to be emitted via the
3357 #define PACKING_FLAG_USED_P() \
3358 (optimize && flag_schedule_insns_after_reload && ISSUE_RATE > 1)
3360 /* If the following macro is defined and nonzero and deterministic
3361 finite state automata are used for pipeline hazard recognition, the
3362 code making resource-constrained software pipelining is on. */
3363 #define RCSP_SOFTWARE_PIPELINING 1
3365 /* If the following macro is defined and nonzero and deterministic
3366 finite state automata are used for pipeline hazard recognition, we
3367 will try to exchange insns in queue ready to improve the schedule.
3368 The more macro value, the more tries will be made. */
3369 #define FIRST_CYCLE_MULTIPASS_SCHEDULING 1
3371 /* The following macro is used only when value of
3372 FIRST_CYCLE_MULTIPASS_SCHEDULING is nonzero. The more macro value,
3373 the more tries will be made to choose better schedule. If the
3374 macro value is zero or negative there will be no multi-pass
3376 #define FIRST_CYCLE_MULTIPASS_SCHEDULING_LOOKAHEAD frv_sched_lookahead
3387 FRV_BUILTIN_MADDHSS,
3388 FRV_BUILTIN_MADDHUS,
3389 FRV_BUILTIN_MSUBHSS,
3390 FRV_BUILTIN_MSUBHUS,
3392 FRV_BUILTIN_MQADDHSS,
3393 FRV_BUILTIN_MQADDHUS,
3394 FRV_BUILTIN_MQSUBHSS,
3395 FRV_BUILTIN_MQSUBHUS,
3396 FRV_BUILTIN_MUNPACKH,
3397 FRV_BUILTIN_MDPACKH,
3408 FRV_BUILTIN_MEXPDHW,
3409 FRV_BUILTIN_MEXPDHD,
3412 FRV_BUILTIN_MMULXHS,
3413 FRV_BUILTIN_MMULXHU,
3418 FRV_BUILTIN_MQMULHS,
3419 FRV_BUILTIN_MQMULHU,
3420 FRV_BUILTIN_MQMULXHU,
3421 FRV_BUILTIN_MQMULXHS,
3422 FRV_BUILTIN_MQMACHS,
3423 FRV_BUILTIN_MQMACHU,
3428 FRV_BUILTIN_MQCPXRS,
3429 FRV_BUILTIN_MQCPXRU,
3430 FRV_BUILTIN_MQCPXIS,
3431 FRV_BUILTIN_MQCPXIU,
3435 FRV_BUILTIN_MWTACCG,
3437 FRV_BUILTIN_MRDACCG,
3439 FRV_BUILTIN_MCLRACC,
3440 FRV_BUILTIN_MCLRACCA,
3441 FRV_BUILTIN_MDUNPACKH,
3443 FRV_BUILTIN_MQXMACHS,
3444 FRV_BUILTIN_MQXMACXHS,
3445 FRV_BUILTIN_MQMACXHS,
3446 FRV_BUILTIN_MADDACCS,
3447 FRV_BUILTIN_MSUBACCS,
3448 FRV_BUILTIN_MASACCS,
3449 FRV_BUILTIN_MDADDACCS,
3450 FRV_BUILTIN_MDSUBACCS,
3451 FRV_BUILTIN_MDASACCS,
3453 FRV_BUILTIN_MDROTLI,
3456 FRV_BUILTIN_MDCUTSSI,
3457 FRV_BUILTIN_MQSATHS,
3458 FRV_BUILTIN_MHSETLOS,
3459 FRV_BUILTIN_MHSETLOH,
3460 FRV_BUILTIN_MHSETHIS,
3461 FRV_BUILTIN_MHSETHIH,
3462 FRV_BUILTIN_MHDSETS,
3466 /* Enable prototypes on the call rtl functions. */
3467 #define MD_CALL_PROTOTYPES 1
3469 extern GTY(()) rtx frv_compare_op0; /* operand save for */
3470 extern GTY(()) rtx frv_compare_op1; /* comparison generation */
3472 #endif /* __FRV_H__ */
OSDN Git Service
