1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1996-2009, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING3. If not, go to --
19 -- http://www.gnu.org/licenses for a complete copy of the license. --
21 -- GNAT was originally developed by the GNAT team at New York University. --
22 -- Extensive contributions were provided by Ada Core Technologies Inc. --
24 ------------------------------------------------------------------------------
26 -- This package contains, for each of the command of the GNAT driver, one
27 -- constant array; each component of this array is a string that defines,
28 -- in coded form as explained below, the conversion of a VMS qualifier of the
29 -- command to the corresponding switch of the GNAT tool corresponding to the
32 -- This package is used by the GNAT driver to invokes the GNAT tools with the
33 -- switches corresponding to the VMS qualifier and by the Project Manager to
34 -- convert VMS qualifiers in project files to their corresponding switch
37 -- This package is also an input to the tool that generates the VMS GNAT
38 -- help information automatically.
40 -- NOTE: the format of this package must follow the following rules, so that
41 -- the VMS GNAT help tool works properly:
43 -- - Each command zone (where the eventual qualifiers are declared) must
44 -- begin with a boxed comment of the form:
46 -- ---------------------------------
47 -- -- Switches for GNAT <COMMAND> --
48 -- ---------------------------------
50 -- where <COMMAND> is the name of a GNAT command in capital letters, for
51 -- example BIND, COMPILE, XREF, ...
53 -- - each qualifier declaration must be followed either by
54 -- - a comment starting with "-- NODOC", to indicate that there is
55 -- no documentation for this qualifier, or
56 -- - a contiguous sequence of comments that constitute the
57 -- documentation of the qualifier.
59 -- - each command zone ends with the declaration of the constant array
60 -- for the command, of the form:
62 -- <Command>__Switches : aliased constant Switches :=
70 -- The syntax of a qualifier declaration is as follows:
72 -- SWITCH_STRING ::= "/ command-qualifier-name TRANSLATION"
76 -- | DIRECTORIES_TRANSLATION
78 -- | NO_SPACE_FILE_TRANSL
79 -- | NUMERIC_TRANSLATION
80 -- | STRING_TRANSLATION
81 -- | OPTIONS_TRANSLATION
82 -- | COMMANDS_TRANSLATION
83 -- | ALPHANUMPLUS_TRANSLATION
84 -- | OTHER_TRANSLATION
86 -- DIRECT_TRANSLATION ::= space UNIX_SWITCHES
87 -- DIRECTORIES_TRANSLATION ::= =* UNIX_SWITCH *
88 -- DIRECTORY_TRANSLATION ::= =% UNIX_SWITCH %
89 -- FILE_TRANSLATION ::= =@ UNIX_SWITCH @
90 -- NO_SPACE_FILE_TRANSL ::= =< UNIX_SWITCH >
91 -- NUMERIC_TRANSLATION ::= =# UNIX_SWITCH # | # number #
92 -- STRING_TRANSLATION ::= =" UNIX_SWITCH "
93 -- OPTIONS_TRANSLATION ::= =OPTION {space OPTION}
94 -- COMMANDS_TRANSLATION ::= =? ARGS space command-name
95 -- ALPHANUMPLUS_TRANSLATION ::= =| UNIX_SWITCH |
97 -- UNIX_SWITCHES ::= UNIX_SWITCH {, UNIX_SWITCH}
99 -- UNIX_SWITCH ::= unix-switch-string | !unix-switch-string | `string'
101 -- OPTION ::= option-name space UNIX_SWITCHES
103 -- ARGS ::= -cargs | -bargs | -largs
105 -- Here command-qual is the name of the switch recognized by the GNATCmd.
106 -- This is always given in upper case in the templates, although in the
107 -- actual commands, either upper or lower case is allowed.
109 -- The unix-switch-string always starts with a minus, and has no commas
110 -- or spaces in it. Case is significant in the unix switch string. If a
111 -- unix switch string is preceded by the not sign (!) it means that the
112 -- effect of the corresponding command qualifier is to remove any previous
113 -- occurrence of the given switch in the command line.
115 -- The DIRECTORIES_TRANSLATION format is used where a list of directories
116 -- is given. This possible corresponding formats recognized by GNATCmd are
117 -- as shown by the following example for the case of PATH
120 -- PATH=(direc,direc,direc,direc)
122 -- When more than one directory is present for the DIRECTORIES case, then
123 -- multiple instances of the corresponding unix switch are generated,
124 -- with the file name being substituted for the occurrence of *.
126 -- The FILE_TRANSLATION format is similar except that only a single
127 -- file is allowed, not a list of files, and only one unix switch is
128 -- generated as a result.
130 -- the NO_SPACE_FILE_TRANSL is similar to FILE_TRANSLATION, except that
131 -- no space is inserted between the switch and the file name.
133 -- The NUMERIC_TRANSLATION format is similar to the FILE_TRANSLATION case
134 -- except that the parameter is a decimal integer in the range 0 to 999999.
136 -- For the OPTIONS_TRANSLATION case, GNATCmd similarly permits one or
137 -- more options to appear (although only in some cases does the use of
138 -- multiple options make logical sense). For example, taking the
139 -- case of ERRORS for GCC, the following are all allowed:
142 -- /ERRORS=(FULL,VERBOSE)
143 -- /ERRORS=(BRIEF IMMEDIATE)
145 -- If no option is provided (e.g. just /ERRORS is written), then the
146 -- first option in the list is the default option. For /ERRORS this
147 -- is NORMAL, so /ERRORS with no option is equivalent to /ERRORS=NORMAL.
149 -- The COMMANDS_TRANSLATION case is only used for gnatmake, to correspond
150 -- to the use of -cargs, -bargs and -largs (the ARGS string as indicated
151 -- is one of these three possibilities). The name given by COMMAND is the
152 -- corresponding command name to be used to interpret the switches to be
153 -- passed on. Switches of this type set modes, e.g. /COMPILER_QUALIFIERS
154 -- sets the mode so that all subsequent switches, up to another switch
155 -- with COMMANDS_TRANSLATION apply to the corresponding commands issued
156 -- by the make utility. For example
158 -- /COMPILER_QUALIFIERS /LIST /BINDER_QUALIFIERS /MAIN
159 -- /COMPILER_QUALIFIERS /NOLIST /COMPILE_CHECKS=SYNTAX
161 -- Clearly these switches must come at the end of the list of switches
162 -- since all subsequent switches apply to an issued command.
164 -- For the DIRECT_TRANSLATION case, an implicit additional qualifier
165 -- declaration is created by prepending NO to the name of the qualifier,
166 -- and then inverting the sense of the UNIX_SWITCHES string. For example,
167 -- given the qualifier definition:
171 -- An implicit qualifier definition is created:
175 -- In the case where, a ! is already present, inverting the sense of the
176 -- switch means removing it.
179 -- A synonym to shorten the table
181 type String_Ptr is access constant String;
182 -- String pointer type used throughout
184 type Switches is array (Natural range <>) of String_Ptr;
185 -- Type used for array of switches
187 type Switches_Ptr is access constant Switches;
189 ----------------------------
190 -- Switches for GNAT BIND --
191 ----------------------------
193 S_Bind_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
195 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
197 -- Add directories to the project search path.
199 S_Bind_Bind : aliased constant S := "/BIND_FILE=" &
204 -- /BIND_FILE[=bind-file-option]
206 -- Specifies the language of the binder generated file.
208 -- ADA (D) Binder file is Ada.
210 -- C Binder file is 'C'.
212 S_Bind_Build : aliased constant S := "/BUILD_LIBRARY=|" &
214 -- /BUILD_LIBRARY=xxx
216 -- Binds the units for library building. In this case the adainit and
217 -- adafinal procedures are rename to xxxinit and xxxfinal. Implies
220 S_Bind_Current : aliased constant S := "/CURRENT_DIRECTORY " &
222 -- /CURRENT_DIRECTORY (D)
223 -- /NOCURRENT_DIRECTORY
225 -- Look for source, library or object files in the default directory.
227 S_Bind_Debug : aliased constant S := "/DEBUG=" &
242 -- /DEBUG[=debug-level]
245 -- Specify level of debugging information generated for the elaboration
246 -- routine. See corresponding qualifier for GNAT COMPILE.
248 S_Bind_DebugX : aliased constant S := "/NODEBUG " &
250 -- NODOC (see /DEBUG)
252 S_Bind_Elab : aliased constant S := "/ELABORATION_DEPENDENCIES " &
254 -- /ELABORATION_DEPENDENCIES
255 -- /NOELABORATION_DEPENDENCIES (D)
257 -- Output complete list of elaboration-order dependencies, showing the
258 -- reason for each dependency. This output can be rather extensive but may
259 -- be useful in diagnosing problems with elaboration order. The output is
260 -- written to SYS$OUTPUT.
262 S_Bind_Error : aliased constant S := "/ERROR_LIMIT=#" &
266 -- Limit number of detected errors to nnn (1-999999).
268 S_Bind_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
270 -- /EXTERNAL_REFERENCE="name=val"
272 -- Specifies an external reference to the project manager. Useful only if
273 -- /PROJECT_FILE is used.
276 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
278 S_Bind_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
280 -- /NOFOLLOW_LINKS_FOR_FILES (D)
281 -- /FOLLOW_LINKS_FOR_FILES
283 -- Follow links when parsing project files
285 S_Bind_Force : aliased constant S := "/FORCE_ELAB_FLAGS " &
287 -- /NOFORCE_ELAB_FLAGS (D)
290 -- Force checking of elaboration Flags
292 S_Bind_Help : aliased constant S := "/HELP " &
296 -- Output usage information.
298 S_Bind_Init : aliased constant S := "/INITIALIZE_SCALARS=" &
305 -- /INITIALIZE_SCALARS[=scalar-option]
307 -- Indicate how uninitialized scalar values for which a pragma
308 -- Initialize_Scalars applies should be initialized.
309 -- scalar-option may be one of the following:
311 -- INVALID (D) Initialize with an invalid value.
312 -- LOW Initialize with the lowest valid value of the subtype.
313 -- HIGH Initialize with the highest valid value of the subtype.
315 S_Bind_Leap : aliased constant S := "/ENABLE_LEAP_SECONDS " &
317 -- /ENABLE_LEAP_SECONDS
318 -- /NOENABLE_LEAP_SECONDS (D)
320 -- Enable leap seconds support in Ada.Calendar and its children.
322 S_Bind_Library : aliased constant S := "/LIBRARY_SEARCH=*" &
324 -- /LIBRARY_SEARCH=(direc[,...])
326 -- When looking for library and object files look also in directories
329 S_Bind_Linker : aliased constant S := "/LINKER_OPTION_LIST " &
331 -- /NOLINKER_OPTION_LIST (D)
332 -- /LINKER_OPTION_LIST
334 -- Output linker options to SYS$OUTPUT. Includes library search
335 -- paths, contents of pragmas Ident and Linker_Options, and
336 -- libraries added by GNAT BIND.
338 S_Bind_Main : aliased constant S := "/MAIN " &
342 -- The main program is in Ada.
346 -- The main program is not in Ada.
348 S_Bind_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
355 -- /MESSAGES_PROJECT_FILE[=messages-option]
357 -- Specifies the "verbosity" of the parsing of project files.
358 -- messages-option may be one of the following:
360 -- DEFAULT (D) No messages are output if there is no error or warning.
362 -- MEDIUM A small number of messages are output.
364 -- HIGH A great number of messages are output, most of them not
365 -- being useful for the user.
367 S_Bind_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
371 -- Do not look for sources the in the system default directory.
373 S_Bind_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
377 -- Do not look for library files in the system default directory.
379 S_Bind_No_Time : aliased constant S := "/NO_TIME_STAMP_CHECK " &
381 -- NODOC (see /TIME_STAMP_CHECK)
383 S_Bind_Object : aliased constant S := "/OBJECT_LIST " &
385 -- /NOOBJECT_LIST (D)
388 -- Output full names of all the object files that must be linker to
389 -- provide the Ada component of the program. The output is written to
392 S_Bind_Order : aliased constant S := "/ORDER_OF_ELABORATION " &
394 -- /NOORDER_OF_ELABORATION (D)
395 -- /ORDER_OF_ELABORATION
397 -- Output chosen elaboration order. The output is written to SYS$OUTPUT.
399 S_Bind_Output : aliased constant S := "/OUTPUT=@" &
403 -- File name to use for the program containing the elaboration code.
405 S_Bind_OutputX : aliased constant S := "/NOOUTPUT " &
409 -- Check only. Do not generate the binder output file.
411 -- In this mode the binder performs all error checks but does not generate
414 S_Bind_Pess : aliased constant S := "/PESSIMISTIC_ELABORATION " &
416 -- /PESSIMISTIC_ELABORATION
418 -- Causes the binder to choose a "pessimistic" elaboration order, i.e. one
419 -- which is most likely to cause elaboration order problems. This can be
420 -- useful in testing portable code to make sure that there are no missing
421 -- elaborate pragmas.
423 S_Bind_Project : aliased constant S := "/PROJECT_FILE=<" &
425 -- /PROJECT_FILE=filename
427 -- Specifies the main project file to be used. The project files rooted
428 -- at the main project file will be parsed before the invocation of the
429 -- binder. The source and object directories to be searched will be
430 -- communicated to the binder through logical names ADA_PRJ_INCLUDE_FILE
431 -- and ADA_PRJ_OBJECTS_FILE.
433 S_Bind_Read : aliased constant S := "/READ_SOURCES=" &
440 -- /READ_SOURCES[=(keyword[,...])]
443 -- The following keyword are accepted:
445 -- ALL (D) Require source files to be present. In this mode, the
446 -- binder insists on being able to locate all source files
447 -- that are referenced and checks their consistency. In
448 -- normal mode, if a source file cannot be located it is
449 -- simply ignored. If you specify the ALL keyword, a
450 -- missing source file is an error.
452 -- NONE Exclude source files. In this mode, the binder only
453 -- checks that ALI files are consistent with one another.
454 -- source files are not accessed. The binder runs faster
455 -- in this mode, and there is still a guarantee that the
456 -- resulting program is self-consistent.
458 -- If a source file has been edited since it was last
459 -- compiled and you specify the NONE keyword, the binder
460 -- will not detect that the object file is out of date
461 -- with the source file.
463 -- This is the same as specifying /NOREAD_SOURCES.
465 -- AVAILABLE Check that object files are consistent with one
466 -- another and are consistent with any source files that
469 S_Bind_ReadX : aliased constant S := "/NOREAD_SOURCES " &
471 -- NODOC (see /READ_SOURCES)
473 S_Bind_Rename : aliased constant S := "/RENAME_MAIN=<" &
477 -- Renames the generated main program from main to xxx.
478 -- This is useful in the case of some cross-building environments, where
479 -- the actual main program is separate from the one generated
482 S_Bind_Report : aliased constant S := "/REPORT_ERRORS=" &
489 -- /REPORT_ERRORS[=(keyword[,...])]
495 -- With the DEFAULT keyword (which is not the default when the binder is
496 -- run from GNAT BIND) or the /NOREPORT_ERRORS qualifier, brief error
497 -- messages are generated to SYS$ERROR. If the VERBOSE keyword is
498 -- present, a header is written to SYS$OUTPUT and any error messages are
499 -- directed to SYS$OUTPUT All that is written to SYS$ERROR is a brief
502 -- If the BRIEF keyword is specified, the binder will generate brief error
503 -- messages to SYS$ERROR even if verbose mode is specified. This is
504 -- relevant only when used together with the VERBOSE keyword or /VERBOSE
507 S_Bind_ReportX : aliased constant S := "/NOREPORT_ERRORS " &
509 -- NODOC (see /REPORT_ERRORS)
511 S_Bind_Restr : aliased constant S := "/RESTRICTION_LIST " &
513 -- /NORESTRICTION_LIST (D)
516 -- Generate list of pragma Restrictions that could be applied to the
517 -- current unit. This is useful for code audit purposes, and also may be
518 -- used to improve code generation in some cases.
520 S_Bind_Return : aliased constant S := "/RETURN_CODES=" &
525 -- /RETURN_CODES=POSIX (D)
528 -- Specifies the style of default exit code returned. Must be used in
529 -- conjunction with and match the Link qualifier with same name.
531 -- POSIX (D) Return Posix success (0) by default.
533 -- VMS Return VMS success (1) by default.
535 S_Bind_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
537 -- /RUNTIME_SYSTEM=xxx
539 -- Binds against an alternate runtime system named xxx or RTS-xxx.
541 S_Bind_Search : aliased constant S := "/SEARCH=*" &
543 -- /SEARCH=(directory[,...])
545 -- When looking for source or object files also look in directories
548 -- This is the same as specifying both /LIBRARY_SEARCH and /SOURCE_SEARCH
551 S_Bind_Shared : aliased constant S := "/SHARED " &
556 -- Link against a shared GNAT run time when available.
558 S_Bind_Slice : aliased constant S := "/TIME_SLICE=#" &
562 -- Set the time slice value to nnn milliseconds. A value of zero means no
563 -- time slicing and also indicates to the tasking run time to match as
564 -- close as possible to the annex D requirements of the RM.
566 S_Bind_Source : aliased constant S := "/SOURCE_SEARCH=*" &
568 -- /SOURCE_SEARCH=(directory[,...])
570 -- When looking for source files also look in directories specified.
572 S_Bind_Static : aliased constant S := "/STATIC " &
577 -- Link against a static GNAT run time.
579 S_Bind_Store : aliased constant S := "/STORE_TRACEBACKS " &
581 -- /STORE_TRACEBACKS (D)
582 -- /NOSTORE_TRACEBACKS
584 -- Store tracebacks in exception occurrences.
585 -- This is the default on VMS, with the zero-cost exception mechanism.
586 -- This qualifier has no impact, except when using the setjmp/longjmp
587 -- exception mechanism, with the GNAT COMPILE qualifier /LONGJMP_SETJMP.
589 S_Bind_Subdirs : aliased constant S := "/SUBDIRS=<" &
593 -- The actual directories (object, exec, library, ...) are subdirectories
594 -- of the directory specified in the project file. If the subdirectory
595 -- does not exist, it is created automatically.
597 S_Bind_Time : aliased constant S := "/TIME_STAMP_CHECK " &
599 -- /TIME_STAMP_CHECK (D)
601 -- Time stamp errors will be treated as errors.
603 -- /NOTIME_STAMP_CHECK
605 -- Ignore time stamp errors. Any time stamp error messages are treated as
606 -- warning messages. This switch essentially disconnects the normal
607 -- consistency checking, and the resulting program may have undefined
608 -- semantics if inconsistent units are present.
610 -- This means that /NOTIME_STAMP_CHECK should be used only in unusual
611 -- situations, with extreme care.
613 S_Bind_Verbose : aliased constant S := "/VERBOSE " &
618 -- Equivalent to /REPORT_ERRORS=VERBOSE.
620 S_Bind_Warn : aliased constant S := "/WARNINGS=" &
627 -- /WARNINGS[=(keyword[,...])]
630 -- The following keywords are supported:
632 -- NORMAL (D) Print warning messages and treat them as warning.
633 -- SUPPRESS Suppress all warning messages (same as /NOWARNINGS).
634 -- ERROR Treat any warning messages as fatal errors
636 S_Bind_WarnX : aliased constant S := "/NOWARNINGS " &
638 -- NODOC (see /WARNINGS)
640 S_Bind_Wide : aliased constant S := "/WIDE_CHARACTER_ENCODING=" &
653 -- /NOWIDE_CHARACTER_ENCODING (D)
654 -- /WIDE_CHARACTER_ENCODING[=encode-type]
656 -- Specifies the mechanism used to encode wide characters, overriding
657 -- the default as set by the /WIDE_CHARACTER_ENCODING option for the
658 -- compilation of the main program.
660 S_Bind_Zero : aliased constant S := "/ZERO_MAIN " &
665 -- Normally the binder checks that the unit name given on the command line
666 -- corresponds to a suitable main subprogram. When /ZERO_MAIN is used,
667 -- a list of ALI files can be given, and the execution of the program
668 -- consists of elaboration of these units in an appropriate order.
670 Bind_Switches : aliased constant Switches :=
673 S_Bind_Build 'Access,
674 S_Bind_Current 'Access,
675 S_Bind_Debug 'Access,
676 S_Bind_DebugX 'Access,
678 S_Bind_Error 'Access,
680 S_Bind_Follow 'Access,
681 S_Bind_Force 'Access,
685 S_Bind_Library 'Access,
686 S_Bind_Linker 'Access,
689 S_Bind_Nostinc 'Access,
690 S_Bind_Nostlib 'Access,
691 S_Bind_No_Time 'Access,
692 S_Bind_Object 'Access,
693 S_Bind_Order 'Access,
694 S_Bind_Output 'Access,
695 S_Bind_OutputX 'Access,
697 S_Bind_Project 'Access,
699 S_Bind_ReadX 'Access,
700 S_Bind_Rename 'Access,
701 S_Bind_Report 'Access,
702 S_Bind_ReportX 'Access,
703 S_Bind_Restr 'Access,
704 S_Bind_Return 'Access,
706 S_Bind_Search 'Access,
707 S_Bind_Shared 'Access,
708 S_Bind_Slice 'Access,
709 S_Bind_Source 'Access,
710 S_Bind_Static 'Access,
711 S_Bind_Store 'Access,
712 S_Bind_Subdirs 'Access,
714 S_Bind_Verbose 'Access,
716 S_Bind_WarnX 'Access,
718 S_Bind_Zero 'Access);
720 -----------------------------
721 -- Switches for GNAT CHECK --
722 -----------------------------
724 S_Check_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
726 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
728 -- Add directories to the project search path.
730 S_Check_All : aliased constant S := "/ALL " &
735 -- Also check the components of the GNAT run time and process the needed
736 -- components of the GNAT RTL when building and analyzing the global
737 -- structure for checking the global rules.
739 S_Check_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
741 -- /EXTERNAL_REFERENCE="name=val"
743 -- Specifies an external reference to the project manager. Useful only if
744 -- /PROJECT_FILE is used.
747 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
749 S_Check_Files : aliased constant S := "/FILES=@" &
753 -- Take as arguments the files that are listed in the specified
756 S_Check_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
758 -- /NOFOLLOW_LINKS_FOR_FILES (D)
759 -- /FOLLOW_LINKS_FOR_FILES
761 -- Follow links when parsing project files
763 S_Check_Help : aliased constant S := "/HELP " &
768 -- Print information about currently implemented checks.
770 S_Check_Locs : aliased constant S := "/LOCS " &
775 -- Use full source locations references in the report file.
777 S_Diagnosis : aliased constant S := "/DIAGNOSTIC_LIMIT=#" &
779 -- /DIAGNOSTIC_LIMIT=500 (D)
780 -- /DIAGNOSTIC_LIMIT=nnn
782 -- NNN is a decimal integer in the range of 1 to 1000 and limits the
783 -- number of diagnostic messages to be generated into Stdout to that
784 -- number. Once that number has been reached, gnatcheck stops
785 -- to print out diagnoses into Stderr. If NNN is equal to 0, this means
786 -- that there is no limit on the number of diagnoses in Stdout.
788 S_Check_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
795 -- /MESSAGES_PROJECT_FILE[=messages-option]
797 -- Specifies the "verbosity" of the parsing of project files.
798 -- messages-option may be one of the following:
800 -- DEFAULT (D) No messages are output if there is no error or warning.
802 -- MEDIUM A small number of messages are output.
804 -- HIGH A great number of messages are output, most of them not
805 -- being useful for the user.
807 S_Check_Project : aliased constant S := "/PROJECT_FILE=<" &
809 -- /PROJECT_FILE=filename
811 -- Specifies the main project file to be used. The project files rooted
812 -- at the main project file will be parsed before the invocation of the
813 -- gnatcheck. The source directories to be searched will be communicated
814 -- to gnatcheck through logical name ADA_PRJ_INCLUDE_FILE.
816 S_Check_Quiet : aliased constant S := "/QUIET " &
821 -- Work quietly, only output warnings and errors.
823 S_Check_Sections : aliased constant S := "/SECTIONS=" &
830 "BY_FILES_BY_RULES " &
832 -- /SECTIONS[=section-option, section-option, ...]
834 -- Specify what sections should be included into the report file.
835 -- By default, all three section (diagnoses in the format corresponding
836 -- to compiler error and warning messages, diagnoses grouped by rules and
837 -- then - by files, diagnoses grouped by files and then - by rules) are
838 -- included in the report file.
840 -- section-option may be one of the following:
842 -- COMPILER_STYLE Include diagnostics in compile-style format
843 -- (diagnoses are grouped by files, for each file
844 -- they are ordered according to the references
846 -- BY_RULES Include diagnostics grouped first by rules and
848 -- BY_FILES_BY_RULES Include diagnostics grouped first by files and
851 -- If one of these options is specified, then the report file contains
852 -- only sections set by these options
854 S_Check_Short : aliased constant S := "/SHORT " &
859 -- Generate a short form of the report file.
861 S_Check_Subdirs : aliased constant S := "/SUBDIRS=<" &
865 -- The actual directories (object, exec, library, ...) are subdirectories
866 -- of the directory specified in the project file. If the subdirectory
867 -- does not exist, it is created automatically.
869 S_Check_Verb : aliased constant S := "/VERBOSE " &
874 -- The version number and copyright notice are output, as well as exact
875 -- copies of the gnat1 commands spawned to obtain the chop control
878 S_Check_Out : aliased constant S := "/OUTPUT=@" &
882 -- Specify the name of the output file.
884 Check_Switches : aliased constant Switches :=
885 (S_Check_Add 'Access,
889 S_Check_Files 'Access,
890 S_Check_Follow 'Access,
891 S_Check_Help 'Access,
892 S_Check_Locs 'Access,
893 S_Check_Mess 'Access,
894 S_Check_Project 'Access,
895 S_Check_Quiet 'Access,
896 S_Check_Sections 'Access,
897 S_Check_Short 'Access,
898 S_Check_Subdirs 'Access,
899 S_Check_Verb 'Access,
900 S_Check_Out 'Access);
902 ----------------------------
903 -- Switches for GNAT CHOP --
904 ----------------------------
906 S_Chop_Comp : aliased constant S := "/COMPILATION " &
908 -- /NOCOMPILATION (D)
911 -- Compilation mode, handle configuration pragmas strictly according to
914 S_Chop_File : aliased constant S := "/FILE_NAME_MAX_LENGTH=#" &
916 -- /FILE_NAME_MAX_LENGTH[=nnn]
918 -- Limit generated file names to NNN (default of 8) characters. This is
919 -- useful if the resulting set of files is required to be interoperable
920 -- with systems like MS-DOS which limit the length of file names.
922 S_Chop_Help : aliased constant S := "/HELP " &
927 -- Print usage information.
929 S_Chop_Over : aliased constant S := "/OVERWRITE " &
934 -- Overwrite existing file names. Normally GNAT CHOP regards it as a
935 -- fatal error situation if there is already a file with the same name as
936 -- a file it would otherwise output. The /OVERWRITE qualifier bypasses
937 -- this check, and any such existing files will be silently overwritten.
939 S_Chop_Pres : aliased constant S := "/PRESERVE " &
944 -- Causes the file modification time stamp of the input file to be
945 -- preserved and used for the time stamp of the output file(s). This may
946 -- be useful for preserving coherency of time stamps in an environment
947 -- where gnatchop is used as part of a standard build process.
949 S_Chop_Quiet : aliased constant S := "/QUIET " &
954 -- Work quietly, only output warnings and errors.
956 S_Chop_Ref : aliased constant S := "/REFERENCE " &
961 -- Generate "Source_Reference" pragmas. Use this qualifier if the output
962 -- files are regarded as temporary and development is to be done in terms
963 -- of the original unchopped file. The /REFERENCE qualifier causes
964 -- "Source_Reference" pragmas to be inserted into each of the generated
965 -- files to refers back to the original file name and line number. The
966 -- result is that all error messages refer back to the original unchopped
969 -- In addition, the debugging information placed into the object file
970 -- (when the /DEBUG qualifier of GNAT COMPILE or GNAT MAKE is specified)
971 -- also refers back to this original file so that tools like profilers
972 -- and debuggers will give information in terms of the original unchopped
975 S_Chop_Verb : aliased constant S := "/VERBOSE " &
980 -- The version number and copyright notice are output, as well as exact
981 -- copies of the gnat1 commands spawned to obtain the chop control
984 Chop_Switches : aliased constant Switches :=
985 (S_Chop_Comp 'Access,
990 S_Chop_Quiet 'Access,
992 S_Chop_Verb 'Access);
994 -----------------------------
995 -- Switches for GNAT CLEAN --
996 -----------------------------
998 S_Clean_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
1000 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
1002 -- Add directories to the project search path.
1004 S_Clean_Compil : aliased constant S := "/COMPILER_FILES_ONLY " &
1006 -- /NOCOMPILER_FILES_ONLY (D)
1007 -- /COMPILER_FILES_ONLY
1009 -- Only attempt to delete the files produced by the compiler, not those
1010 -- produced by the binder or the linker. The files that are not to be
1011 -- deleted are library files, interface copy files, binder generated files
1012 -- and executable files.
1014 S_Clean_Current : aliased constant S := "/CURRENT_DIRECTORY " &
1016 -- /CURRENT_DIRECTORY (D)
1018 -- Look for ALI or object files in the directory where GNAT CLEAN was
1021 -- /NOCURRENT_DIRECTORY
1023 -- Do not look for ALI or object files in the directory where GNAT CLEAN
1026 S_Clean_Delete : aliased constant S := "/DELETE " &
1030 -- Delete the files that are not read-only.
1034 -- Informative-only mode. Do not delete any files. Output the list of the
1035 -- files that would have been deleted if this switch was not specified.
1037 S_Clean_Dirobj : aliased constant S := "/DIRECTORY_OBJECTS=@" &
1039 -- /DIRECTORY_OBJECTS=<file>
1041 -- Find the object files and .ALI files in <file>.
1042 -- This qualifier is not compatible with /PROJECT_FILE.
1044 S_Clean_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
1046 -- /EXTERNAL_REFERENCE="name=val"
1048 -- Specifies an external reference to the project manager. Useful only if
1049 -- /PROJECT_FILE is used.
1052 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
1054 S_Clean_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
1056 -- /NOFOLLOW_LINKS_FOR_FILES (D)
1057 -- /FOLLOW_LINKS_FOR_FILES
1059 -- Follow links when parsing project files
1061 S_Clean_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " &
1063 -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D)
1064 -- /FULL_PATH_IN_BRIEF_MESSAGES
1066 -- When using project files, if some errors or warnings are detected
1067 -- during parsing and verbose mode is not in effect (no use of qualifier
1068 -- /VERBOSE), then error lines start with the full path name of the
1069 -- project file, rather than its simple file name.
1071 S_Clean_Help : aliased constant S := "/HELP " &
1076 -- Output a message explaining the usage of gnatclean.
1078 S_Clean_Index : aliased constant S := "/SOURCE_INDEX=#" &
1080 -- /SOURCE_INDEX=nnn
1082 -- Specifies the index of the units in the source file
1083 -- By default, source files are mono-unit and there is no index
1085 S_Clean_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
1092 -- /MESSAGES_PROJECT_FILE[=messages-option]
1094 -- Specifies the "verbosity" of the parsing of project files.
1095 -- messages-option may be one of the following:
1097 -- DEFAULT (D) No messages are output if there is no error or warning.
1099 -- MEDIUM A small number of messages are output.
1101 -- HIGH A great number of messages are output, most of them not
1102 -- being useful for the user.
1104 S_Clean_Object : aliased constant S := "/OBJECT_SEARCH=*" &
1106 -- /OBJECT_SEARCH=(directory,...)
1108 -- When searching for library and object files, look in the specified
1109 -- directories. The order in which library files are searched is the same
1112 S_Clean_Project : aliased constant S := "/PROJECT_FILE=<" &
1114 -- /PROJECT_FILE=filename
1116 -- Specifies the main project file to be used. The project files rooted
1117 -- at the main project file will be parsed before the invocation of the
1118 -- compiler. The source and object directories to be searched will be
1119 -- communicated to gnatclean through logical names ADA_PRJ_INCLUDE_FILE
1120 -- and ADA_PRJ_OBJECTS_FILE.
1122 S_Clean_Quiet : aliased constant S := "/QUIET " &
1127 -- Quiet output. If there are no error, do not output anything, except in
1128 -- verbose mode (qualifier /VERBOSE) or in informative-only mode
1129 -- (qualifier /NODELETE).
1131 S_Clean_Recurs : aliased constant S := "/RECURSIVE " &
1136 -- When a project file is specified (using switch -P), clean all imported
1137 -- and extended project files, recursively. If this qualifier is not
1138 -- specified, only the files related to the main project file are to be
1139 -- deleted. This qualifier has no effect if no project file is specified.
1141 S_Clean_Search : aliased constant S := "/SEARCH=*" &
1143 -- /SEARCH=(directory,...)
1145 -- Equivalent to /OBJECT_SEARCH=(directory,...).
1147 S_Clean_Subdirs : aliased constant S := "/SUBDIRS=<" &
1151 -- The actual directories (object, exec, library, ...) are subdirectories
1152 -- of the directory specified in the project file. If the subdirectory
1153 -- does not exist, it is created automatically.
1155 S_Clean_Verbose : aliased constant S := "/VERBOSE " &
1162 Clean_Switches : aliased constant Switches :=
1163 (S_Clean_Add 'Access,
1164 S_Clean_Compil 'Access,
1165 S_Clean_Current'Access,
1166 S_Clean_Delete 'Access,
1167 S_Clean_Dirobj 'Access,
1168 S_Clean_Ext 'Access,
1169 S_Clean_Follow 'Access,
1170 S_Clean_Full 'Access,
1171 S_Clean_Help 'Access,
1172 S_Clean_Index 'Access,
1173 S_Clean_Mess 'Access,
1174 S_Clean_Object 'Access,
1175 S_Clean_Project'Access,
1176 S_Clean_Quiet 'Access,
1177 S_Clean_Recurs 'Access,
1178 S_Clean_Search 'Access,
1179 S_Clean_Subdirs'Access,
1180 S_Clean_Verbose'Access);
1182 -------------------------------
1183 -- Switches for GNAT COMPILE --
1184 -------------------------------
1186 S_GCC_Ada_83 : aliased constant S := "/83 " &
1191 -- Although GNAT is primarily an Ada 95 compiler, it accepts this
1192 -- qualifier to specify that an Ada 83 mode program is being compiled. If
1193 -- you specify this qualifier, GNAT rejects Ada 95 extensions and applies
1194 -- Ada 83 semantics. It is not possible to guarantee this qualifier does
1195 -- a perfect job; for example, some subtle tests of pathological cases,
1196 -- such as are found in ACVC tests that have been removed from the ACVC
1197 -- suite for Ada 95, may not compile correctly. However for practical
1198 -- purposes, using this qualifier should ensure that programs that
1199 -- compile correctly under the /83 qualifier can be ported reasonably
1200 -- easily to an Ada 83 compiler. This is the main use of this qualifier.
1202 -- With few exceptions (most notably the need to use "<>" on
1203 -- unconstrained generic formal parameters), it is not necessary to use
1204 -- this qualifier switch when compiling Ada 83 programs, because, with
1205 -- rare and obscure exceptions, Ada 95 is upwardly compatible with Ada
1206 -- 83. This means that a correct Ada 83 program is usually also a correct
1209 S_GCC_Ada_95 : aliased constant S := "/95 " &
1213 -- Allows GNAT to recognize the full range of Ada 95 constructs.
1214 -- This is the normal default for GNAT Pro.
1216 S_GCC_Ada_05 : aliased constant S := "/05 " &
1220 -- Allows GNAT to recognize all implemented proposed Ada 2005
1221 -- extensions. See features file for list of implemented features.
1223 S_GCC_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
1225 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
1227 -- Add directories to the project search path.
1229 S_GCC_Asm : aliased constant S := "/ASM " &
1234 -- Use to cause the assembler source file to be generated, using S as the
1235 -- filetype, instead of the object file. This may be useful if you need
1236 -- to examine the generated assembly code.
1238 S_GCC_AValid : aliased constant S := "/ASSUME_VALID " &
1240 -- /NO_ASSUME_VALID (D)
1243 -- Use to tell the compiler to assume that all objects have valid values
1244 -- except those occurring as prefixes to 'Valid attributes. In the default
1245 -- mode, the compiler assumes that values may be invalid unless it can
1246 -- be sure that they are valid, and code is generated to allow for this
1247 -- possibility. The use of /ASSUME_VALID will improve the code.
1249 S_GCC_Checks : aliased constant S := "/CHECKS=" &
1251 "-gnato,!-gnatE,!-gnatp " &
1259 "!-gnato,!-gnatp " &
1265 -- /CHECKS[=(keyword[,...])]
1267 -- If you compile with the default options, GNAT will insert many runtime
1268 -- checks into the compiled code, including code that performs range
1269 -- checking against constraints, but not arithmetic overflow checking for
1270 -- integer operations (including division by zero) or checks for access
1271 -- before elaboration on subprogram calls. All other runtime checks, as
1272 -- required by the Ada 95 Reference Manual, are generated by default.
1274 -- You may specify one or more of the following keywords to the /CHECKS
1275 -- qualifier to modify this behavior:
1277 -- DEFAULT The behavior described above. This is the default
1278 -- if the /CHECKS qualifier is not present on the
1279 -- command line. Same as /NOCHECKS.
1281 -- OVERFLOW Enables overflow checking for integer operations and
1282 -- checks for access before elaboration on subprogram
1283 -- calls. This causes GNAT to generate slower and larger
1284 -- executable programs by adding code to check for both
1285 -- overflow and division by zero (resulting in raising
1286 -- "Constraint_Error" as required by Ada semantics).
1287 -- Similarly, GNAT does not generate elaboration check
1288 -- by default, and you must specify this keyword to
1291 -- Note that this keyword does not affect the code
1292 -- generated for any floating-point operations; it
1293 -- applies only to integer operations. For floating-point,
1294 -- GNAT has the "Machine_Overflows" attribute set to
1295 -- "False" and the normal mode of operation is to generate
1296 -- IEEE NaN and infinite values on overflow or invalid
1297 -- operations (such as dividing 0.0 by 0.0).
1299 -- ELABORATION Enables dynamic checks for access-before-elaboration
1300 -- on subprogram calls and generic instantiations.
1302 -- ASSERTIONS The pragmas "Assert" and "Debug" normally have no
1303 -- effect and are ignored. This keyword causes "Assert"
1304 -- and "Debug" pragmas to be activated, as well as
1305 -- "Check", "Precondition" and "Postcondition" pragmas.
1307 -- SUPPRESS_ALL Suppress all runtime checks as though you have "pragma
1308 -- Suppress (all_checks)" in your source. Use this switch
1309 -- to improve the performance of the code at the expense
1310 -- of safety in the presence of invalid data or program
1313 -- DEFAULT Suppress the effect of any option OVERFLOW or
1316 -- FULL (D) Similar to OVERFLOW, but suppress the effect of any
1317 -- option ELABORATION or SUPPRESS_ALL.
1319 -- These keywords only control the default setting of the checks. You
1320 -- may modify them using either "Suppress" (to remove checks) or
1321 -- "Unsuppress" (to add back suppressed checks) pragmas in your program
1324 S_GCC_ChecksX : aliased constant S := "/NOCHECKS " &
1325 "-gnatp,!-gnato,!-gnatE";
1326 -- NODOC (see /CHECKS)
1328 S_GCC_Compres : aliased constant S := "/COMPRESS_NAMES " &
1330 -- /NOCOMPRESS_NAMES (D)
1333 -- Compress debug information and external symbol name table entries.
1334 -- In the generated debugging information, and also in the case of long
1335 -- external names, the compiler uses a compression mechanism if the name
1336 -- is very long. This compression method uses a checksum, and avoids
1337 -- trouble on some operating systems which have difficulty with very long
1340 S_GCC_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" &
1342 -- /CONFIGURATION_PRAGMAS_FILE=file
1344 -- Specify a configuration pragmas file that need to be taken into account
1346 S_GCC_Current : aliased constant S := "/CURRENT_DIRECTORY " &
1348 -- /CURRENT_DIRECTORY (D)
1349 -- /NOCURRENT_DIRECTORY
1351 -- Look for source files in the default directory.
1353 S_GCC_Data : aliased constant S := "/DATA_PREPROCESSING=<" &
1355 -- /DATA_PREPROCESSING=file_name
1357 -- This qualifier indicates to the compiler the file name (without
1358 -- directory information) of the preprocessor data file to use.
1359 -- The preprocessor data file should be found in the source directories.
1361 -- A preprocessing data file is a text file with significant lines
1362 -- indicating how should be preprocessed either a specific source or all
1363 -- sources not mentioned in other lines. A significant line is a non
1364 -- empty, non comment line. Comments are similar to Ada comments.
1366 -- Each significant line starts with either a literal string or the
1367 -- character '*'. A literal string is the file name (without directory
1368 -- information) of the source to preprocess. A character '*' indicates the
1369 -- preprocessing for all the sources that are not specified explicitly on
1370 -- other lines. It is an error to have two lines with the same file name
1371 -- or two lines starting with the character '*'.
1373 -- After the file name or the character '*', another optional literal
1374 -- string indicating the file name of the definition file to be used for
1375 -- preprocessing. (see 15.3 Form of Definitions File. The definition files
1376 -- are found by the compiler in one of the source directories. In some
1377 -- cases, when compiling a source in a directory other than the current
1378 -- directory, if the definition file is in the current directory, it may
1379 -- be necessary to add the current directory as a source directory through
1380 -- qualifier "/SEARCH=[]", otherwise the compiler would not find the
1383 -- Then, optionally, switches similar to those of gnatprep may be found.
1384 -- Those switches are:
1386 -- -b Causes both preprocessor lines and the lines deleted by
1387 -- preprocessing to be replaced by blank lines, preserving
1388 -- the line number. This switch is always implied;
1389 -- however, if specified after `-c' it cancels the effect
1392 -- -c Causes both preprocessor lines and the lines deleted by
1393 -- preprocessing to be retained as comments marked with
1394 -- the special string "--! ".
1396 -- -Dsymbol=value Define or redefine a symbol, associated with value.
1397 -- A symbol is an Ada identifier, or an Ada reserved word,
1398 -- with the exception of "if", "else", "elsif", "end",
1399 -- "and", "or" and "then". value is either a literal
1400 -- string, an Ada identifier or any Ada reserved word.
1401 -- A symbol declared with this switch replaces a symbol
1402 -- with the same name defined in a definition file.
1404 -- -s Causes a sorted list of symbol names and values to be
1405 -- listed on the standard output file.
1407 -- -u Causes undefined symbols to be treated as having the
1408 -- value FALSE in the context of a preprocessor test.
1409 -- In the absence of this option, an undefined symbol
1410 -- in a #if or #elsif test will be treated as an error.
1412 -- Examples of valid lines in a preprocessor data file:
1414 -- "toto.adb" "prep.def" -u
1415 -- -- preprocess "toto.adb", using definition file "prep.def",
1416 -- -- undefined symbol are False.
1418 -- * -c -DVERSION=V101
1419 -- -- preprocess all other sources without a definition file;
1420 -- -- suppressed lined are commented; symbol VERSION has the value
1423 -- "titi.adb" "prep2.def" -s
1424 -- -- preprocess "titi.adb", using definition file "prep2.def";
1425 -- -- list all symbols with their values.
1427 S_GCC_Debug : aliased constant S := "/DEBUG=" &
1440 -- /DEBUG[=debug-level]
1443 -- Specifies how much debugging information is to be included in
1444 -- the resulting object fie.
1446 -- 'debug-level' is one of the following:
1448 -- SYMBOLS (D) Include both debugger symbol records and traceback
1449 -- in the object file.
1451 -- ALL Include debugger symbol records, traceback plus
1452 -- extra debug information in the object file.
1454 -- NONE Excludes both debugger symbol records and traceback
1455 -- from the object file. Same as /NODEBUG.
1457 -- TRACEBACK Includes only traceback records in the object
1458 -- file. This is the default when /DEBUG is not used.
1460 S_GCC_DebugX : aliased constant S := "/NODEBUG " &
1462 -- NODOC (see /Debug)
1464 S_GCC_Dist : aliased constant S := "/DISTRIBUTION_STUBS=" &
1469 -- /NODISTRIBUTION_STUBS (D)
1470 -- /DISTRIBUTION_STUBS[=dist-opt]
1472 -- 'dist-opt' is either RECEIVER (the default) or SENDER and indicates
1473 -- that stubs for use in distributed programs (see the Distributed
1474 -- Systems Annex of the Ada RM) should be generated.
1476 S_GCC_DistX : aliased constant S := "/NODISTRIBUTION_STUBS " &
1477 "!-gnatzr,!-gnatzc";
1478 -- NODOC (see /DISTRIBUTION_STUBS)
1480 S_GCC_Error : aliased constant S := "/ERROR_LIMIT=#" &
1482 -- /NOERROR_LIMIT (D)
1485 -- NNN is a decimal integer in the range of 1 to 999999 and limits the
1486 -- number of error messages to be generated to that number. Once that
1487 -- number has been reached, the compilation is abandoned.
1488 -- Specifying 999999 is equivalent to /NOERROR_LIMIT.
1490 S_GCC_ErrorX : aliased constant S := "/NOERROR_LIMIT " &
1492 -- NODOC (see /ERROR_LIMIT)
1494 S_GCC_Expand : aliased constant S := "/EXPAND_SOURCE " &
1496 -- /NOEXPAND_SOURCE (D)
1499 -- Produces a listing of the expanded code in Ada source form. For
1500 -- example, all tasking constructs are reduced to appropriate run-time
1501 -- library calls. The maximum line length for the listing 72.
1503 S_GCC_Lexpand : aliased constant S := "/LEXPAND_SOURCE=#" &
1505 -- /LEXPAND_SOURCE=nnn
1507 -- Produces a listing of the expanded code in Ada source form. For
1508 -- example, all tasking constructs are reduced to appropriate run-time
1509 -- library calls. The parameter is the maximum line length for the
1512 S_GCC_Extend : aliased constant S := "/EXTENSIONS_ALLOWED " &
1514 -- /NOEXTENSIONS_ALLOWED (D)
1515 -- /EXTENSIONS_ALLOWED
1517 -- GNAT specific language extensions allowed.
1519 S_GCC_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
1521 -- /EXTERNAL_REFERENCE="name=val"
1523 -- Specifies an external reference to the project manager. Useful only if
1524 -- /PROJECT_FILE is used.
1527 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
1529 S_GCC_File : aliased constant S := "/FILE_NAME_MAX_LENGTH=#" &
1531 -- /FILE_NAME_MAX_LENGTH=nnn
1533 -- Activates file name "krunching". NNN, a decimal integer in the range
1534 -- 1-999, indicates the maximum allowable length of a file name (not
1535 -- including the ADS or ADB filetype. The default is not to enable file
1538 S_GCC_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
1540 -- /NOFOLLOW_LINKS_FOR_FILES (D)
1541 -- /FOLLOW_LINKS_FOR_FILES
1543 -- Follow links when parsing project files
1545 S_GCC_Force : aliased constant S := "/FORCE_ALI " &
1550 -- In normal operation mode, the .ALI file is not generated if any
1551 -- illegalities are detected in the program. The use of this qualifier
1552 -- forces generation of the .ALI file. This file is marked as being
1553 -- in error, so it cannot be used for binding purposes, but it does
1554 -- contain reasonably complete cross-reference information, and thus may
1555 -- be useful for use by tools (e.g. semantic browsing tools or integrated
1556 -- development environments) that are driven from the .ALI file.
1558 S_GCC_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " &
1560 -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D)
1561 -- /FULL_PATH_IN_BRIEF_MESSAGES
1563 -- When using project files, if some errors or warnings are detected
1564 -- during parsing and verbose mode is not in effect (no use of qualifier
1565 -- /VERBOSE), then error lines start with the full path name of the
1566 -- project file, rather than its simple file name.
1568 S_GCC_Generate : aliased constant S := "/GENERATE_PROCESSED_SOURCE " &
1570 -- /NOGENERATE_PROCESSED_SOURCE (D)
1571 -- /GENERATE_PROCESSED_SOURCE
1573 -- Generate a file <source>_prep if the integrated preprocessing
1574 -- is modifying the source text.
1576 S_GCC_GNAT : aliased constant S := "/GNAT_INTERNAL " &
1578 -- /NOGNAT_INTERNAL (D)
1581 -- Internal GNAT implementation mode. This should not be used for
1582 -- applications programs, it is intended only for use by the compiler
1583 -- and its run-time library. For documentation, see the GNAT sources.
1584 -- Note that it implies /WARNINGS=ALL,ERRORS and /STYLE_CHECKS=GNAT
1585 -- so that all standard warnings and all standard style options are
1586 -- turned on. All warnings and style error messages are treated as
1589 S_GCC_Help : aliased constant S := "/HELP " &
1594 -- Output usage information.
1596 S_GCC_Ident : aliased constant S := "/IDENTIFIER_CHARACTER_SET=" &
1619 -- /NOIDENTIFIER_CHARACTER_SET (D)
1620 -- /IDENTIFIER_CHARACTER_SET=char-set
1622 -- Normally GNAT recognizes the Latin-1 character set in source program
1623 -- identifiers, as described in the reference manual. This qualifier
1624 -- causes GNAT to recognize alternate character sets in identifiers.
1625 -- 'char-set' is one of the following strings indicating the character
1628 -- DEFAULT (D) Equivalent to 1, below. Also equivalent to
1629 -- /NOIDENTIFIER_CHARACTER_SET.
1631 -- 1 The basic character set is Latin-1. This character
1632 -- set is defined by ISO standard 8859, part 1. The lower
1633 -- half (character codes 16#00# ... 16#7F#) is identical
1634 -- to standard ASCII coding, but the upper half is used
1635 -- to represent additional characters. This includes
1636 -- extended letters used by European languages, such as
1637 -- the umlaut used in German.
1639 -- You may use any of these extended characters freely
1640 -- in character or string literals. In addition, the
1641 -- extended characters that represent letters can be
1642 -- used in identifiers.
1644 -- 2 Latin-2 letters allowed in identifiers, with uppercase
1645 -- and lowercase equivalence.
1647 -- 3 Latin-3 letters allowed in identifiers, with uppercase
1648 -- and lower case equivalence.
1650 -- 4 Latin-4 letters allowed in identifiers, with uppercase
1651 -- and lower case equivalence.
1653 -- PC IBM PC code page 437. This code page is the normal
1654 -- default for PCs in the U.S. It corresponds to the
1655 -- original IBM PC character set. This set has some, but
1656 -- not all, of the extended Latin-1 letters, but these
1657 -- letters do not have the same encoding as Latin-1. In
1658 -- this mode, these letters are allowed in identifiers
1659 -- with uppercase and lowercase equivalence.
1661 -- PC850 This code page (850) is a modification of 437 extended
1662 -- to include all the Latin-1 letters, but still not with
1663 -- the usual Latin-1 encoding. In this mode, all these
1664 -- letters are allowed in identifiers with uppercase and
1665 -- lower case equivalence.
1667 -- FULL_UPPER Any character in the range 80-FF allowed in
1668 -- identifiers, and all are considered distinct. In
1669 -- other words, there are no uppercase and lower case
1670 -- equivalences in this range.
1672 -- NO_UPPER No upper-half characters in the range 80-FF are
1673 -- allowed in identifiers. This gives Ada 95
1674 -- compatibility for identifier names.
1676 -- WIDE GNAT allows wide character codes to appear in
1677 -- character and string literals, and also optionally
1678 -- in identifiers. See the /WIDE_CHARACTER_ENCODING
1679 -- qualifier for information on encoding formats.
1681 S_GCC_IdentX : aliased constant S := "/NOIDENTIFIER_CHARACTER_SET " &
1683 -- NODOC (see /IDENTIFIER_CHARACTER_SET)
1685 S_GCC_Ignore : aliased constant S := "/IGNORE_REP_CLAUSES " &
1687 -- /IGNORE_REP_CLAUSES
1689 -- Causes all representation clauses to be ignored and treated as
1690 -- comments. Useful when compiling foreign code (for example when ASIS
1691 -- is used to analyze such code).
1693 S_GCC_Immed : aliased constant S := "/IMMEDIATE_ERRORS " &
1695 -- /NOIMMEDIATE_ERRORS (D)
1696 -- /IMMEDIATE_ERRORS
1698 -- Causes errors to be displayed as soon as they are encountered, rather
1699 -- than after compilation is terminated. If GNAT terminates prematurely
1700 -- or goes into an infinite loop, the last error message displayed may
1701 -- help to pinpoint the culprit.
1703 S_GCC_Inline : aliased constant S := "/INLINE=" &
1711 -- /INLINE[=keyword]
1713 -- Selects the level of inlining for your program. In the absence of this
1714 -- qualifier, GNAT does not attempt inlining across units and does not
1715 -- need to access the bodies of subprograms for which "pragma Inline" is
1716 -- specified if they are not in the current unit.
1718 -- The supported keywords are as follows:
1720 -- PRAGMA (D) Recognize and process "Inline" pragmas. However,
1721 -- for the inlining to actually occur, optimization
1722 -- must be enabled. This enables inlining across unit
1723 -- boundaries, that is, inlining a call in one unit of
1724 -- a subprogram declared in a with'ed unit. The compiler
1725 -- will access these bodies, creating an extra source
1726 -- dependency for the resulting object file, and where
1727 -- possible, the call will be inlined.
1729 -- This qualifier also turns on full optimization and
1730 -- requests GNAT to try to attempt automatic inlining
1731 -- of small subprograms within a unit.
1733 -- Specifying /OPTIMIZE=NONE will disable the main effect
1734 -- of this qualifier, but you may specify other
1735 -- optimization options, to get either lower
1736 -- (/OPTIMIZE=SOME) or higher (/OPTIMIZE=UNROLL_LOOPS)
1737 -- levels of optimization.
1739 -- FULL Front end inlining. The front end inlining activated
1740 -- by this switch is generally more extensive, and quite
1741 -- often more effective than the standard PRAGMA inlining
1742 -- mode. It will also generate additional dependencies.
1744 -- SUPPRESS Suppresses all inlining, even if other optimization
1745 -- or inlining switches are set.
1747 S_GCC_InlineX : aliased constant S := "/NOINLINE " &
1749 -- NODOC (see /INLINE)
1751 S_GCC_Intsrc : aliased constant S := "/INTERSPERSE_SOURCE " &
1754 -- /NO_INTERSPERSE_SOURCE (D)
1755 -- /INTERSPERSE_SOURCE
1757 -- Causes output from /XDEBUG or /EXPAND_SOURCE to be interspersed with
1758 -- lines from the original source file, output as comment lines with the
1759 -- associated line number.
1761 S_GCC_Just : aliased constant S := "/JUSTIFY_MESSAGES=#" &
1764 -- /NO_JUSTIFY_MESSAGES (D)
1765 -- /JUSTIFY_MESSAGES=nnn
1767 -- Causes error messages to be reformatted so that a message and all its
1768 -- continuation lines count as one warning or error in the statistics on
1769 -- total errors, and the message is broken down into lines (justified) so
1770 -- that no line is longer than nnn characters. The default message
1771 -- behavior (each message counted separately and not reformatted to fit
1772 -- a particular line length) can be obtained using /NO_JUSTIFY_MESSAGES.
1774 S_GCC_JustX : aliased constant S := "/NO_JUSTIFY_MESSAGES " &
1777 -- NODOC (see /JUSTIFY_MESSAGES)
1779 S_GCC_Length : aliased constant S := "/MAX_LINE_LENGTH=#" &
1781 -- /MAX_LINE_LENGTH=nnn
1783 -- Set maximum line length.
1784 -- The length of lines must not exceed the given value nnn.
1786 S_GCC_List : aliased constant S := "/LIST " &
1791 -- Cause a full listing of the file to be generated. In the case where
1792 -- a body is compiled, the corresponding spec is also listed, along
1793 -- with any subunits.
1795 S_GCC_Machine : aliased constant S := "/MACHINE_CODE_LISTING " &
1797 -- /NOMACHINE_CODE_LISTING (D)
1798 -- /MACHINE_CODE_LISTING
1800 -- Cause a full machine code listing of the file to be generated to
1801 -- <filename>.lis. Interspersed source is included if the /DEBUG
1802 -- qualifier is also present.
1804 S_GCC_Mapping : aliased constant S := "/MAPPING_FILE=<" &
1806 -- /MAPPING_FILE=file_name
1808 -- Use mapping file file_name
1810 -- A mapping file is a way to communicate to the compiler two mappings:
1811 -- from unit names to file names (without any directory information) and
1812 -- from file names to path names (with full directory information).
1813 -- These mappings are used by the compiler to short-circuit the path
1816 -- The use of mapping files is not required for correct operation of the
1817 -- compiler, but mapping files can improve efficiency, particularly when
1818 -- sources are read over a slow network connection. In normal operation,
1819 -- you need not be concerned with the format or use of mapping files,
1820 -- and /MAPPING_FILE is not a qualifier that you would use explicitly.
1821 -- It is intended only for use by automatic tools such as GNAT MAKE
1822 -- running under the project file facility. The description here of the
1823 -- format of mapping files is provided for completeness and for possible
1824 -- use by other tools.
1826 -- A mapping file is a sequence of sets of three lines. In each set, the
1827 -- first line is the unit name, in lower case, with "%s" appended for
1828 -- specifications and "%b" appended for bodies; the second line is the
1829 -- file name; and the third line is the path name.
1835 -- /gnat/project1/sources/main.2_ada
1837 -- When qualifier ?MAPPING_FILE is specified, the compiler will create in
1838 -- memory the two mappings from the specified file. If there is any
1839 -- problem (non existent file, truncated file or duplicate entries),
1840 -- no mapping will be created.
1842 -- Several /MAPPING_FILE qualifiers may be specified; however, only the
1843 -- last one on the command line will be taken into account.
1845 -- When using a project file, GNAT MAKE creates a temporary mapping file
1846 -- and communicates it to the compiler using this switch.
1848 S_GCC_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
1855 -- /MESSAGES_PROJECT_FILE[=messages-option]
1857 -- Specifies the "verbosity" of the parsing of project files.
1858 -- messages-option may be one of the following:
1860 -- DEFAULT (D) No messages are output if there is no error or warning.
1862 -- MEDIUM A small number of messages are output.
1864 -- HIGH A great number of messages are output, most of them not
1865 -- being useful for the user.
1867 S_GCC_Nesting : aliased constant S := "/MAX_NESTING=#" &
1871 -- Set maximum level of nesting of constructs (including subprograms,
1872 -- loops, blocks, packages, and conditionals).
1873 -- The level of nesting must not exceed the given value nnn.
1874 -- A value of zero disable this style check (not enabled by default).
1876 S_GCC_Noadc : aliased constant S := "/NO_GNAT_ADC " &
1880 -- Cause the compiler to ignore any configuration pragmas file GNAT.ADC
1881 -- in the default directory. Implied by qualifier /PROJECT_FILE.
1882 -- Often used in conjunction with qualifier /CONFIGURATION_PRAGMAS_FILE.
1884 S_GCC_Noload : aliased constant S := "/NOLOAD " &
1888 -- Cause the compiler to operate in semantic check mode with full
1889 -- checking for all illegalities specified in the reference manual, but
1890 -- without generation of any source code (no object or ALI file
1893 -- Since dependent files must be accessed, you must follow the GNAT
1894 -- semantic restrictions on file structuring to operate in this mode:
1896 -- o The needed source files must be accessible.
1897 -- o Each file must contain only one compilation unit.
1898 -- o The file name and unit name must match.
1900 -- The output consists of error messages as appropriate. No object file
1901 -- or ALI file is generated. The checking corresponds exactly to the
1902 -- notion of legality in the Ada reference manual.
1904 -- Any unit can be compiled in semantics-checking-only mode, including
1905 -- units that would not normally be compiled (generic library units,
1906 -- subunits, and specifications where a separate body is present).
1908 S_GCC_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
1912 -- Do not look in the default directory for source files of the runtime.
1914 S_GCC_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
1918 -- Do not look for library files in the system default directory.
1920 S_GCC_Opt : aliased constant S := "/OPTIMIZE=" &
1922 "-O2,!-O0,!-O1,!-O3 " &
1924 "-O0,!-O1,!-O2,!-O3 " &
1926 "-O1,!-O0,!-O2,!-O3 " &
1928 "-Os,!-O0,!-O1,!-O2,!-O3 " &
1930 "-O1,!-O0,!-O2,!-O3 " &
1933 "NO_STRICT_ALIASING " &
1934 "-fno-strict-aliasing " &
1936 "-O3,!-O0,!-O1,!-O2";
1938 -- /OPTIMIZE[=(keyword[,...])]
1940 -- Selects the level of optimization for your program. The supported
1941 -- keywords are as follows:
1943 -- ALL (D) Perform most optimizations, including those that
1944 -- may be expensive.
1946 -- NONE Do not do any optimizations. Same as /NOOPTIMIZE.
1948 -- SOME Perform some optimizations, but omit ones that
1949 -- are costly in compilation time.
1951 -- SPACE Optimize space usage
1953 -- DEVELOPMENT Same as SOME.
1955 -- INLINING Full optimization, and also attempt automatic inlining
1956 -- of small subprograms within a unit
1958 -- UNROLL_LOOPS Try to unroll loops. This keyword may be specified
1959 -- with any keyword above other than NONE. Loop
1960 -- unrolling usually, but not always, improves the
1961 -- performance of programs.
1963 -- NO_STRICT_ALIASING
1964 -- Suppress aliasing analysis. When optimization is
1965 -- enabled (ALL or SOME above), the compiler assumes
1966 -- that pointers do in fact point to legitimate values
1967 -- of the pointer type (allocated from the proper pool).
1968 -- If this assumption is violated, e.g. by the use of
1969 -- unchecked conversion, then it may be necessary to
1970 -- suppress this assumption using this keyword (which
1971 -- may be specified only in conjunction with any
1972 -- keyword above, other than NONE).
1974 S_GCC_OptX : aliased constant S := "/NOOPTIMIZE " &
1975 "-O0,!-O1,!-O2,!-O3";
1976 -- NODOC (see /OPTIMIZE)
1978 S_GCC_Output : aliased constant S := "/OUTPUT_FILE=<" &
1980 -- /OUTPUT_FILE=fname
1982 -- This has the same effect as /LIST except that the output is written
1983 -- to a file instead of to standard output. If the given fname
1984 -- does not start with a period, then it is the full name of the file
1985 -- to be written. If fname starts with a period, the name of the file
1986 -- is the concatenation of to the name of the file being compiled with
1987 -- fname where the period is replace by an underline. For example, if
1988 -- file xyz.adb is compiled with -gnatl=.lst, then the output is written
1989 -- to file xyz.adb_lst.
1991 S_GCC_Pointer : aliased constant S := "/POINTER_SIZE=" &
2000 -- /POINTER_SIZE=64 (D)
2001 -- /POINTER_SIZE[=(keyword[,...])]
2003 -- Change how pointers and descriptors are allocated. The following
2004 -- keywords are supported:
2006 -- 64 (D) Allocate heap pointers in 64bit space except as
2007 -- constrained by a 32bit size clause or by
2008 -- Convention_C and generate 64bit descriptors for
2009 -- Descriptor mechanisms for calling imported
2010 -- subprograms and accept both 64bit and 32bit
2011 -- descriptors for calls to exported subprograms.
2013 -- LONG Equivalent to option 64.
2015 -- 32 Allocate all heap pointers in 32bit space and
2016 -- generate 32bit descriptors for Descriptor
2017 -- mechanisms for calling imported subprograms.
2019 -- SHORT Equivalent to option 32.
2021 S_GCC_Polling : aliased constant S := "/POLLING " &
2026 -- Enable polling. See the description of pragma Polling in the GNAT
2027 -- Reference Manual for full details.
2029 S_GCC_Project : aliased constant S := "/PROJECT_FILE=<" &
2031 -- /PROJECT_FILE=filename
2033 -- Specifies the main project file to be used. The project files rooted
2034 -- at the main project file will be parsed before the invocation of the
2035 -- compiler. The source and object directories to be searched will be
2036 -- communicated to the compiler through logical names
2037 -- ADA_PRJ_INCLUDE_FILE and ADA_PRJ_OBJECTS_FILE.
2039 S_GCC_Psta : aliased constant S := "/PRINT_STANDARD " &
2043 -- cause the compiler to output a representation of package Standard
2044 -- in a form very close to standard Ada. It is not quite possible to
2045 -- do this and remain entirely Standard (since new numeric base types
2046 -- cannot be created in standard Ada), but the output is easily
2047 -- readable to any Ada programmer, and is useful to determine the
2048 -- characteristics of target dependent types in package Standard.
2050 S_GCC_Reswarn : aliased constant S := "/TREAT_RESTRICTIONS_AS_WARNINGS " &
2053 -- /NO_TREAT_RESTRICTIONS_AS_WARNINGS (D)
2054 -- /TREAT_RESTRICTIONS_AS_WARNINGS
2056 -- Causes all restrictions to be treated as warnings (pragma Restriction
2057 -- treated as Restriction_Warnings, pragma Profile as Profile_Warnings,
2058 -- and pragma Ravenscar sets restriction warnings instead of restrictions)
2060 S_GCC_Report : aliased constant S := "/REPORT_ERRORS=" &
2071 -- /NOREPORT_ERRORS (D)
2072 -- /REPORT_ERRORS[=(keyword[,...])]
2074 -- Change the way errors are reported. The following keywords are
2077 -- VERBOSE (D) Verbose mode. Full error output with source lines
2080 -- BRIEF Generate the brief format error messages to
2081 -- SYS$OUTPUT as well as the verbose format message or
2084 -- FULL Normally, the compiler suppresses error messages that
2085 -- are likely to be redundant. This keyword causes all
2086 -- error messages to be generated. One particular effect
2087 -- is for the case of references to undefined variables.
2088 -- If a given variable is referenced several times, the
2089 -- normal format of messages produces one error. With
2090 -- FULL, each undefined reference produces a separate
2093 -- IMMEDIATE Normally, the compiler saves up error messages and
2094 -- generates them at the end of compilation in proper
2095 -- sequence. This keyword causes error messages to be
2096 -- generated as soon as they are detected. The use of
2097 -- IMMEDIATE usually causes error messages to be
2098 -- generated out of sequence. Use it when the compiler
2099 -- blows up due to an internal error. In this case, the
2100 -- error messages may be lost. Sometimes blowups are
2101 -- the result of mishandled error messages, so you may
2102 -- want to run with this keyword to determine whether
2103 -- any error messages were generated.
2105 -- DEFAULT Turn off VERBOSE and BRIEF. Same as /NOREPORT_ERRORS.
2107 S_GCC_ReportX : aliased constant S := "/NOREPORT_ERRORS " &
2109 -- NODOC (see /REPORT_ERRORS)
2111 S_GCC_Repinfo : aliased constant S := "/REPRESENTATION_INFO=" &
2128 -- /NOREPRESENTATION_INFO (D)
2129 -- /REPRESENTATION_INFO[=(keyword[,...])]
2131 -- This qualifier controls output from the compiler of a listing showing
2132 -- representation information for declared types and objects.
2134 -- ARRAYS (D) Size and alignment information is listed for
2135 -- declared array and record types.
2137 -- ARRAYS_FILE Similar to ARRAYS, but the output is to a file
2138 -- with the name 'file_rep' where 'file' is the name
2139 -- of the corresponding source file.
2141 -- NONE no information is output (equivalent to omitting
2142 -- the /REPRESENTATION_INFO qualifiers).
2144 -- OBJECTS Size and alignment information is listed for all
2145 -- declared types and objects.
2147 -- OBJECTS_FILE Similar to OBJECTS, but the output is to a file
2148 -- with the name 'file_rep' where 'file' is the name
2149 -- of the corresponding source file.
2151 -- SYMBOLIC Symbolic expression information for values that
2152 -- are computed at run time for variant records.
2154 -- SYMBOLIC_FILE Similar to SYMBOLIC, but the output is to a file
2155 -- with the name 'file_rep' where 'file' is the name
2156 -- of the corresponding source file.
2158 -- DEFAULT Equivalent to ARRAYS.
2160 S_GCC_RepinfX : aliased constant S := "/NOREPRESENTATION_INFO " &
2162 -- NODOC (see /REPRESENTATION_INFO)
2164 S_GCC_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
2166 -- /RUNTIME_SYSTEM=xxx
2168 -- Build against an alternate runtime system named xxx or RTS-xxx.
2170 S_GCC_Search : aliased constant S := "/SEARCH=*" &
2172 -- /SEARCH=(directory[,...])
2174 -- When looking for source files also look in directories specified.
2176 S_GCC_Style : aliased constant S := "/STYLE_CHECKS=" &
2205 "NOARRAY_INDEXES " &
2215 "DOS_LINE_ENDINGS " &
2217 "NODOS_LINE_ENDINGS " &
2255 "STANDARD_CASING " &
2257 "NOSTANDARD_CASING " &
2259 "ORDERED_SUBPROGRAMS " &
2261 "NOORDERED_SUBPROGRAMS " &
2263 "OVERRIDING_INDICATORS " &
2265 "NOOVERRIDING_INDICATORS " &
2279 "STATEMENTS_AFTER_THEN_ELSE " &
2281 "NOSTATEMENTS_AFTER_THEN_ELSE " &
2287 "UNNECESSARY_BLANK_LINES " &
2289 "NOUNNECESSARY_BLANK_LINES " &
2295 -- /NOSTYLE_CHECKS (D)
2296 -- /STYLE_CHECKS[=(keyword,[...])]
2298 -- Normally, GNAT permits any code layout consistent with the reference
2299 -- manual requirements. This qualifier imposes style checking on the
2300 -- input source code. The following keywords are supported:
2302 -- ALL_BUILTIN (D) Equivalent to the following list of options:
2303 -- 3, ATTRIBUTE, BLANKS, COMMENTS, END, VTABS,
2304 -- HTABS, IF_THEN, KEYWORD, LAYOUT, LINE_LENGTH,
2305 -- PRAGMA, REFERENCES, SPECS, TOKEN.
2307 -- 1 .. 9 Specify indentation level from 1 to 9.
2308 -- The general style of required indentation is as
2309 -- specified by the examples in the Ada Reference
2310 -- Manual. Full line comments must be aligned with
2311 -- the -- starting on a column that is a multiple
2312 -- of the alignment level.
2314 -- ATTRIBUTE Check attribute casing.
2315 -- Attribute names, including the case of keywords
2316 -- such as digits used as attributes names,
2317 -- must be written in mixed case, that is,
2318 -- the initial letter and any letter following an
2319 -- underscore must be uppercase.
2320 -- All other letters must be lowercase.
2322 -- ARRAY_INDEXES Check indexes of array attributes.
2323 -- For array attributes First, Last, Range,
2324 -- or Length, the index number must be omitted
2325 -- for one-dimensional arrays and is required
2326 -- for multi-dimensional arrays.
2328 -- BLANKS Blanks not allowed at statement end.
2329 -- Trailing blanks are not allowed at the end of
2330 -- statements. The purpose of this rule, together
2331 -- with option HTABS (no horizontal tabs), is to
2332 -- enforce a canonical format for the use of
2333 -- blanks to separate source tokens.
2335 -- COMMENTS Check comments.
2336 -- Comments must meet the following set of rules:
2338 -- * The "--" that starts the column must either
2339 -- start in column one, or else at least one
2340 -- blank must precede this sequence.
2342 -- * Comments that follow other tokens on a line
2343 -- must have at least one blank following the
2344 -- "--" at the start of the comment.
2346 -- * Full line comments must have two blanks
2347 -- following the "--" that starts the comment,
2348 -- with the following exceptions.
2350 -- * A line consisting only of the "--"
2351 -- characters, possibly preceded by blanks is
2354 -- * A comment starting with "--x" where x is
2355 -- a special character is permitted. This
2356 -- allows proper processing of the output
2357 -- generated by specialized tools including
2358 -- gnatprep (where --! is used) and the SPARK
2359 -- annotation language (where --# is used).
2360 -- For the purposes of this rule, a special
2361 -- character is defined as being in one of the
2362 -- ASCII ranges 16#21#..16#2F# or
2365 -- * A line consisting entirely of minus signs,
2366 -- possibly preceded by blanks, is permitted.
2367 -- This allows the construction of box
2368 -- comments where lines of minus signs are
2369 -- used to form the top and bottom of the box.
2371 -- * If a comment starts and ends with "--" is
2372 -- permitted as long as at least one blank
2373 -- follows the initial "--". Together with
2374 -- the preceding rule, this allows the
2375 -- construction of box comments, as shown in
2376 -- the following example:
2378 -- ---------------------------
2379 -- -- This is a box comment --
2380 -- ---------------------------
2382 -- DOS_LINE_ENDINGS Check that no DOS line terminators are present
2383 -- All lines must be terminated by a single
2384 -- ASCII.LF character. In particular the DOS line
2385 -- terminator sequence CR / LF is not allowed).
2387 -- END Check end/exit labels.
2388 -- Optional labels on end statements ending
2389 -- subprograms and on exit statements exiting
2390 -- named loops, are required to be present.
2392 -- GNAT Enforces a set of style conventions that
2393 -- match the style used in the GNAT source code.
2394 -- This maybe useful when developing code that
2395 -- is eventually intended to be incorporated into
2396 -- GNAT. For further details, see GNAT sources.
2398 -- HTABS No horizontal tabs.
2399 -- Horizontal tab characters are not permitted in
2400 -- the source text. Together with the BLANKS
2401 -- (no blanks at end of line) option, this
2402 -- enforces a canonical form for the use of blanks
2403 -- to separate source tokens.
2405 -- IF_THEN Check if-then layout.
2406 -- The keyword then must appear either on the
2407 -- same line as the corresponding if, or on a line
2408 -- on its own, lined up under the if with at least
2409 -- one non-blank line in between containing all or
2410 -- part of the condition to be tested.
2412 -- KEYWORD Check keyword casing.
2413 -- All keywords must be in lower case (with the
2414 -- exception of keywords such as digits used as
2415 -- attribute names to which this check does not
2418 -- LAYOUT Check layout.
2419 -- Layout of statement and declaration constructs
2420 -- must follow the recommendations in the Ada
2421 -- Reference Manual, as indicated by the form of
2422 -- the syntax rules. For example an else keyword
2423 -- must be lined up with the corresponding if
2426 -- There are two respects in which the style rule
2427 -- enforced by this check option are more liberal
2428 -- than those in the Ada Reference Manual.
2429 -- First in the case of record declarations,
2430 -- it is permissible to put the record keyword on
2431 -- the same line as the type keyword, and then
2432 -- the end in end record must line up under type.
2433 -- For example, either of the following two
2434 -- layouts is acceptable:
2447 -- Second, in the case of a block statement,
2448 -- a permitted alternative is to put the block
2449 -- label on the same line as the declare or begin
2450 -- keyword, and then line the end keyword up under
2451 -- the block label. For example both the following
2457 -- A : Integer := 3;
2464 -- A : Integer := 3;
2469 -- The same alternative format is allowed for
2470 -- loops. For example, both of the following are
2475 -- Clear : while J < 10 loop
2480 -- while J < 10 loop
2486 -- LINE_LENGTH Check maximum line length.
2487 -- The length of source lines must not exceed 79
2488 -- characters, including any trailing blanks
2489 -- The value of 79 allows convenient display on
2490 -- an 80 character wide device or window, allowing
2491 -- for possible special treatment of 80 character
2494 -- NONE Clear any previously set style checks.
2496 -- ORDERED_SUBPROGRAMS Check order of subprogram bodies.
2497 -- All subprogram bodies in a given scope (e.g.
2498 -- a package body) must be in alphabetical order.
2499 -- The ordering rule uses normal Ada rules for
2500 -- comparing strings, ignoring casing of letters,
2501 -- except that if there is a trailing numeric
2502 -- suffix, then the value of this suffix is used
2503 -- in the ordering (e.g. Junk2 comes before
2506 -- OVERRIDING_INDICATORS Check that overriding subprograms are
2507 -- explicitly marked as such. The declaration of
2508 -- a primitive operation of a type extension that
2509 -- overrides an inherited operation must carry
2510 -- an overriding indicator.
2512 -- PRAGMA Check pragma casing.
2513 -- Pragma names must be written in mixed case,
2514 -- that is, the initial letter and any letter
2515 -- following an underscore must be uppercase.
2516 -- All other letters must be lowercase.
2518 -- REFERENCES Check references.
2519 -- All identifier references must be cased in the
2520 -- same way as the corresponding declaration.
2521 -- No specific casing style is imposed on
2522 -- identifiers. The only requirement is for
2523 -- consistency of references with declarations.
2525 -- SPECS Check separate specs.
2526 -- Separate declarations ("specs") are required
2527 -- for subprograms (a body is not allowed to serve
2528 -- as its own declaration). The only exception is
2529 -- that parameterless library level procedures are
2530 -- not required to have a separate declaration.
2531 -- This exception covers the most frequent form of
2532 -- main program procedures.
2534 -- STANDARD_CASING Check casing of entities in Standard.
2535 -- Any identifier from Standard must be cased to
2536 -- match the presentation in the Ada Reference
2537 -- Manual (for example, Integer and ASCII.NUL).
2539 -- TOKEN Check token spacing.
2540 -- The following token spacing rules are enforced:
2542 -- * The keywords abs and not must be followed
2545 -- * The token => must be surrounded by spaces.
2547 -- * The token <> must be preceded by a space or
2548 -- a left parenthesis.
2550 -- * Binary operators other than ** must be
2551 -- surrounded by spaces. There is no
2552 -- restriction on the layout of the ** binary
2555 -- * Colon must be surrounded by spaces.
2557 -- * Colon-equal (assignment) must be surrounded
2560 -- * Comma must be the first non-blank character
2561 -- on the line, or be immediately preceded by
2562 -- a non-blank character, and must be followed
2565 -- * If the token preceding a left paren ends
2566 -- with a letter or digit, then a space must
2567 -- separate the two tokens.
2569 -- * A right parenthesis must either be the
2570 -- first non-blank character on a line, or it
2571 -- must be preceded by a non-blank character.
2573 -- * A semicolon must not be preceded by
2574 -- a space, and must not be followed by
2575 -- a non-blank character.
2577 -- * A unary plus or minus may not be followed
2580 -- * A vertical bar must be surrounded by
2583 -- In the above rules, appearing in column one is
2584 -- always permitted, that is, counts as meeting
2585 -- either a requirement for a required preceding
2586 -- space, or as meeting a requirement for no
2589 -- Appearing at the end of a line is also always
2590 -- permitted, that is, counts as meeting either
2591 -- a requirement for a following space,
2592 -- or as meeting a requirement for no following
2595 -- UNNECESSARY_BLANK_LINES
2596 -- Check for unnecessary blank lines.
2597 -- A blank line is considered unnecessary if it
2598 -- appears at the end of the file, or if more
2599 -- than one blank line occurs in sequence.
2601 -- VTABS No form feeds or vertical tabs.
2602 -- Form feeds or vertical tab characters are not
2603 -- permitted in the source text.
2605 -- XTRA_PARENS Check for the use of an unnecessary extra
2606 -- level of parentheses (C - style) around
2607 -- conditions in if statements, while statements
2608 -- and exit statements.
2610 S_GCC_StyleX : aliased constant S := "/NOSTYLE_CHECKS " &
2612 -- NODOC (see /STYLE_CHECKS)
2614 S_GCC_Subdirs : aliased constant S := "/SUBDIRS=<" &
2618 -- The actual directories (object, exec, library, ...) are subdirectories
2619 -- of the directory specified in the project file. If the subdirectory
2620 -- does not exist, it is created automatically.
2622 S_GCC_Symbol : aliased constant S := "/SYMBOL_PREPROCESSING=" & '"' &
2624 -- /SYMBOL_PREPROCESSING="symbol=value"
2626 -- Define or redefine a preprocessing symbol, associated with value.
2627 -- If "=value" is not specified, then the value of the symbol is True.
2628 -- A symbol is an identifier, following normal Ada (case-insensitive)
2629 -- rules for its syntax, and value is any sequence (including an empty
2630 -- sequence) of characters from the set (letters, digits, period,
2631 -- underline). Ada reserved words may be used as symbols, with the
2632 -- exceptions of "if", "else", "elsif", "end", "and", "or" and "then".
2634 -- A symbol declared with this qualifier on the command line replaces
2635 -- a symbol with the same name either in a definition file or specified
2636 -- with a switch -D in the preprocessor data file.
2638 -- This qualifier is similar to qualifier /ASSOCIATE of
2639 -- GNAT PREPROCESSING.
2641 S_GCC_Syntax : aliased constant S := "/SYNTAX_ONLY " &
2643 -- /NOSYNTAX_ONLY (D)
2646 -- Run GNAT in syntax checking only mode. You can check a series of
2647 -- files in a single command, and can use wild cards to specify such a
2650 -- You may use other qualifiers in conjunction with this qualifier. In
2651 -- particular, /LIST and /REPORT_ERRORS=VERBOSE are useful to control the
2652 -- format of any generated error messages.
2654 -- The output is simply the error messages, if any. No object file or ALI
2655 -- file is generated by a syntax-only compilation. Also, no units other
2656 -- than the one specified are accessed. For example, if a unit "X" with's
2657 -- a unit "Y", compiling unit "X" in syntax check only mode does not
2658 -- access the source file containing unit "Y".
2660 -- Normally, GNAT allows only a single unit in a source file. However,
2661 -- this restriction does not apply in syntax-check-only mode, and it is
2662 -- possible to check a file containing multiple compilation units
2663 -- concatenated together. This is primarily used by the GNAT CHOP
2666 S_GCC_Table : aliased constant S := "/TABLE_MULTIPLIER=#" &
2668 -- /TABLE_MULTIPLIER=nnn
2670 -- All compiler tables start at nnn times usual starting size.
2672 S_GCC_Trace : aliased constant S := "/TRACE_UNITS " &
2677 -- This switch that does for the frontend what /VERBOSE does for the
2678 -- backend. The system prints the name of each unit, either a compilation
2679 -- unit or nested unit, as it is being analyzed.
2681 S_GCC_Tree : aliased constant S := "/TREE_OUTPUT " &
2686 -- Cause GNAT to write the internal tree for a unit to a file (with the
2687 -- filetype ATB for a body or ATS for a spec). This is not normally
2688 -- required, but is used by separate analysis tools. Typically these
2689 -- tools do the necessary compilations automatically, so you should never
2690 -- have to specify this switch in normal operation.
2692 S_GCC_Trys : aliased constant S := "/TRY_SEMANTICS " &
2697 -- In normal operation mode the compiler first parses the program and
2698 -- determines if there are any syntax errors. If there are, appropriate
2699 -- error messages are generated and compilation is immediately
2700 -- terminated. This qualifier tells GNAT to continue with semantic
2701 -- analysis even if syntax errors have been found. This may enable the
2702 -- detection of more errors in a single run. On the other hand, the
2703 -- semantic analyzer is more likely to encounter some internal fatal
2704 -- error when given a syntactically invalid tree.
2706 S_GCC_Units : aliased constant S := "/UNITS_LIST " &
2708 -- /NOUNITS_LIST (D)
2711 -- Print a list of units required by this compilation on SYS$OUTPUT. The
2712 -- listing includes all units on which the unit being compiled depends
2713 -- either directly or indirectly.
2715 S_GCC_Unique : aliased constant S := "/UNIQUE_ERROR_TAG " &
2717 -- /NOUNIQUE_ERROR_TAG (D)
2718 -- /UNIQUE_ERROR_TAG
2720 -- Tag compiler error messages with the string "error: ".
2722 S_GCC_Upcase : aliased constant S := "/UPPERCASE_EXTERNALS " &
2724 -- /NOUPPERCASE_EXTERNALS (D)
2725 -- /UPPERCASE_EXTERNALS
2727 -- Fold default and explicit external names in pragmas Import and Export
2728 -- to uppercase for compatibility with the default behavior of DEC C.
2730 S_GCC_Valid : aliased constant S := "/VALIDITY_CHECKING=" &
2779 -- /VALIDITY_CHECKING[=(keyword,[...])]
2781 -- Control level of validity checking.
2783 -- DEFAULT (D) In this mode checks are made to prevent
2784 -- erroneous behavior in accordance with the RM.
2785 -- Notably extra checks may be needed for case
2786 -- statements and subscripted array assignments.
2788 -- NONE No special checks for invalid values are
2789 -- performed. This means that references to
2790 -- uninitialized variables can cause erroneous
2791 -- behavior from constructs like case statements
2792 -- and subscripted array assignments. In this
2793 -- mode, invalid values can lead to erroneous
2796 -- FULL Every assignment is checked for validity, so
2797 -- that it is impossible to assign invalid values.
2798 -- The RM specifically allows such assignments,
2799 -- but in this mode, invalid values can never be
2800 -- assigned, and an attempt to perform such an
2801 -- assignment immediately raises Constraint_Error.
2802 -- This behavior is allowed (but not required) by
2803 -- the RM. This mode is intended as a debugging aid,
2804 -- and may be useful in helping to track down
2805 -- uninitialized variables. It may be useful to
2806 -- use this in conjunction with the Normalize_Scalars
2807 -- pragma which attempts to initialize with invalid
2808 -- values where possible.
2810 S_GCC_Verbose : aliased constant S := "/VERBOSE " &
2815 -- Show commands generated by the GCC driver. Normally used only for
2816 -- debugging purposes or if you need to be sure what version of the
2817 -- compiler you are executing.
2819 S_GCC_Verb_Asm : aliased constant S := "/VERBOSE_ASM " &
2820 "-S,-verbose_asm,!-c";
2824 -- Use to cause the assembler source file to be generated, using S as the
2825 -- filetype, instead of the object file. This may be useful if you need
2826 -- to examine the generated assembly code.
2828 S_GCC_Warn : aliased constant S := "/WARNINGS=" &
2830 "!-gnatws,!-gnatwe " &
2843 "FAILING_ASSERTIONS " &
2845 "NO_FAILING_ASSERTIONS " &
2847 "BAD_FIXED_VALUES " &
2849 "NO_BAD_FIXED_VALUES " &
2851 "BIASED_REPRESENTATION " &
2853 "NO_BIASED_REPRESENTATION " &
2859 "MISSING_COMPONENT_CLAUSES " &
2861 "NOMISSING_COMPONENT_CLAUSES " &
2863 "IMPLICIT_DEREFERENCE " &
2865 "NO_IMPLICIT_DEREFERENCE " &
2869 "UNREFERENCED_FORMALS " &
2871 "NOUNREFERENCED_FORMALS " &
2873 "UNRECOGNIZED_PRAGMAS " &
2875 "NOUNRECOGNIZED_PRAGMAS " &
2883 "NOIMPLEMENTATION " &
2889 "CONSTANT_VARIABLES " &
2891 "NOCONSTANT_VARIABLES " &
2899 "NOMODIFIED_UNREF " &
2907 "OUT_PARAM_UNREF " &
2909 "NOOUT_PARAM_UNREF " &
2911 "INEFFECTIVE_INLINE " &
2913 "NOINEFFECTIVE_INLINE " &
2917 "PARAMETER_ORDER " &
2919 "NOPARAMETER_ORDER " &
2921 "NOMISSING_PARENS " &
2929 "NOOBJECT_RENAMES " &
2938 "-Wuninitialized " &
2943 "VARIABLES_UNINITIALIZED " &
2945 "NOVARIABLES_UNINITIALIZED " &
2947 "LOWBOUND_ASSUMED " &
2949 "NOLOWBOUND_ASSUMED " &
2951 "WARNINGS_OFF_PRAGMAS " &
2953 "NO_WARNINGS_OFF_PRAGMAS " &
2955 "IMPORT_EXPORT_PRAGMAS " &
2957 "NOIMPORT_EXPORT_PRAGMAS " &
2959 "LOCAL_RAISE_HANDLING " &
2961 "NOLOCAL_RAISE_HANDLING " &
2963 "ADA_2005_COMPATIBILITY " &
2965 "NOADA_2005_COMPATIBILITY " &
2967 "UNCHECKED_CONVERSIONS " &
2969 "NOUNCHECKED_CONVERSIONS " &
2973 -- Suppress the output of all warning messages from the GNAT front end.
2974 -- Note that it does not suppress warnings from the gcc back end.
2976 -- /WARNINGS[=(keyword[,...])]
2978 -- In addition to error messages, corresponding to illegalities as
2979 -- defined in the reference manual, the compiler detects two kinds of
2980 -- warning situations. First, the compiler considers some constructs
2981 -- suspicious and generates a warning message to alert you to a possible
2982 -- error. Second, if the compiler detects a situation that is sure to
2983 -- raise an exception at runtime, it generates a warning message.
2985 -- You may specify the following keywords to change this behavior:
2987 -- DEFAULT (D) The default behavior above.
2989 -- ALL Activate all optional warnings.
2990 -- Activates most optional warning messages,
2991 -- see remaining list in this section for
2992 -- details on optional warning messages that
2993 -- can be individually controlled.
2994 -- The warnings that are not turned on by
2995 -- this option are BIASED_ROUNDING,
2996 -- IMPLICIT_DEREFERENCE, HIDING and
2997 -- ELABORATION. All other optional Ada
2998 -- warnings are turned on.
3000 -- EVERY Activate every optional warning.
3001 -- Activates all optional warnings, including
3002 -- those listed above as exceptions for ALL.
3004 -- NOALL Suppress all optional errors.
3005 -- Suppresses all optional warning messages
3006 -- that can be activated by option ALL.
3008 -- ALL_GCC Request additional messages from the GCC
3009 -- backend. Most of these are not relevant
3012 -- CONDITIONALS Activate warnings for conditional
3013 -- Expressions used in tests that are known
3014 -- to be True or False at compile time. The
3015 -- default is that such warnings are not
3018 -- NOCONDITIONALS Suppress warnings for conditional
3019 -- expressions used in tests that are known
3020 -- to be True or False at compile time.
3022 -- IMPLICIT_DEREFERENCE Activate warnings on implicit dereferencing.
3023 -- The use of a prefix of an access type in an
3024 -- indexed component, slice, or selected component
3025 -- without an explicit .all will generate
3026 -- a warning. With this warning enabled, access
3027 -- checks occur only at points where an explicit
3028 -- .all appears in the source code (assuming no
3029 -- warnings are generated as a result of this
3030 -- option). The default is that such warnings are
3031 -- not generated. Note that /WARNINGS=ALL does not
3032 -- affect the setting of this warning option.
3034 -- NOIMPLICIT_DEREFERENCE Suppress warnings on implicit dereferencing.
3035 -- in indexed components, slices, and selected
3038 -- ELABORATION Activate warnings on missing pragma
3039 -- Elaborate_All statements. The default is
3040 -- that such warnings are not generated.
3042 -- NOELABORATION Suppress warnings on missing pragma
3043 -- Elaborate_All statements.
3045 -- ERRORS Warning messages are to be treated as errors.
3046 -- The warning string still appears, but the
3047 -- warning messages are counted as errors, and
3048 -- prevent the generation of an object file.
3050 -- HIDING Activate warnings on hiding declarations.
3051 -- A declaration is considered hiding if it is
3052 -- for a non-overloadable entity, and it declares
3053 -- an entity with the same name as some other
3054 -- entity that is directly or use-visible. The
3055 -- default is that such warnings are not
3058 -- NOHIDING Suppress warnings on hiding declarations.
3060 -- IMPLEMENTATION Activate warnings for a with of an internal
3061 -- GNAT implementation unit, defined as any unit
3062 -- from the Ada, Interfaces, GNAT, DEC or
3063 -- System hierarchies that is not documented in
3064 -- either the Ada Reference Manual or the GNAT
3065 -- Programmer's Reference Manual. Such units are
3066 -- intended only for internal implementation
3067 -- purposes and should not be with'ed by user
3068 -- programs. The default is that such warnings
3071 -- NOIMPLEMENTATION Disables warnings for a with of an internal
3072 -- GNAT implementation unit.
3074 -- INEFFECTIVE_INLINE Activate warnings on ineffective pragma Inlines
3075 -- Activates warnings for failure of front end
3076 -- inlining (activated by /INLINE=FULL) to inline
3077 -- a particular call. There are many reasons for
3078 -- not being able to inline a call, including most
3079 -- commonly that the call is too complex to
3080 -- inline. This warning can also be turned on
3081 -- using /INLINE=FULL.
3083 -- NOINEFFECTIVE_INLINE Suppress warnings on ineffective pragma Inlines
3084 -- Suppresses warnings on ineffective pragma
3085 -- Inlines. If the inlining mechanism cannot
3086 -- inline a call, it will simply ignore the
3087 -- request silently.
3089 -- MISSING_COMPONENT_CLAUSES
3090 -- Activate warnings for cases when there are
3091 -- component clauses for a record type, but not
3092 -- for every component of the record.
3094 -- NOMISSING_COMPONENT_CLAUSES
3095 -- Suppress warnings for cases when there are
3096 -- missing component clauses for a record type.
3099 -- Activate warnings for cases where parentheses
3100 -- are not used and the result is potential
3101 -- ambiguity from a reader's point of view.
3102 -- For example (not a > b) when a and b are
3103 -- modular means (not (a) > b) and very likely
3104 -- the programmer intended (not (a > b)).
3107 -- Suppress warnings for cases where parentheses
3108 -- are not used and the result is potential
3109 -- ambiguity from a reader's point of view.
3111 -- MODIFIED_UNREF Activates warnings for variables that are
3112 -- assigned (using an initialization value or with
3113 -- one or more assignment statements) but whose
3114 -- value is never read. The warning is suppressed
3115 -- for volatile variables and also for variables
3116 -- that are renamings of other variables or for
3117 -- which an address clause is given. This warning
3118 -- can also be turned on using /WARNINGS/OPTIONAL.
3120 -- NOMODIFIED_UNREF Disables warnings for variables that are
3121 -- assigned or initialized, but never read.
3123 -- NORMAL Sets normal warning mode, in which enabled
3124 -- warnings are issued and treated as warnings
3125 -- rather than errors. This is the default mode.
3126 -- It can be used to cancel the effect of an
3127 -- explicit /WARNINGS=SUPPRESS or
3128 -- /WARNINGS=ERRORS. It also cancels the effect
3129 -- of the implicit /WARNINGS=ERRORS that is
3130 -- activated by the use of /STYLE=GNAT.
3132 -- OBSOLESCENT Activates warnings for calls to subprograms
3133 -- marked with pragma Obsolescent and for use of
3134 -- features in Annex J of the Ada Reference
3135 -- Manual. In the case of Annex J, not all
3136 -- features are flagged. In particular use of the
3137 -- renamed packages (like Text_IO), use of package
3138 -- ASCII and use of the attribute 'Constrained are
3139 -- not flagged, since these are very common and
3140 -- would generate many annoying positive warnings.
3141 -- The default is that such warnings are not
3144 -- NOOBSOLESCENT Disables warnings on use of obsolescent
3147 -- OBJECT_RENAME Activate warnings for non limited objects
3148 -- renaming parameterless functions.
3150 -- NOOBJECT_RENAME Suppress warnings for non limited objects
3151 -- renaming parameterless functions.
3153 -- OPTIONAL Equivalent to ALL.
3155 -- NOOPTIONAL Equivalent to NOALL.
3157 -- OVERLAYS Activate warnings for possibly unintended
3158 -- initialization effects of defining address
3159 -- clauses that cause one variable to overlap
3160 -- another. The default is that such warnings
3163 -- NOOVERLAYS Suppress warnings on possibly unintended
3164 -- initialization effects of defining address
3165 -- clauses that cause one variable to overlap
3168 -- REDUNDANT Activate warnings for redundant constructs.
3169 -- In particular assignments of a variable to
3170 -- itself, and a type conversion that converts
3171 -- an object to its own type. The default
3172 -- is that such warnings are not generated.
3174 -- NOREDUNDANT Suppress warnings for redundant constructs.
3176 -- SUPPRESS Completely suppress the output of all warning
3177 -- messages. Same as /NOWARNINGS.
3179 -- UNCHECKED_CONVERSIONS Activates warnings on unchecked conversions.
3180 -- Causes warnings to be generated for
3181 -- unchecked conversions when the two types are
3182 -- known at compile time to have different sizes.
3183 -- The default is that such warnings are
3186 -- NOUNCHECKED_CONVERSIONS Suppress warnings for unchecked conversions.
3188 -- UNINITIALIZED Generate warnings for uninitialized variables.
3189 -- This is a GCC option, not an Ada option.
3190 -- You must also specify the /OPTIMIZE qualifier
3191 -- with a value other than NONE (in other words,
3192 -- this keyword works only if optimization is
3195 -- UNREFERENCED_FORMALS Activate warnings on unreferenced formals.
3196 -- Causes a warning to be generated if a formal
3197 -- parameter is not referenced in the body of
3198 -- the subprogram. This warning can also be turned
3199 -- on using option ALL or UNUSED.
3201 -- NOUNREFERENCED_FORMALS Suppress warnings on unreferenced formals.
3202 -- Suppresses warnings for unreferenced formal
3203 -- parameters. Note that the combination UNUSED
3204 -- followed by NOUNREFERENCED_FORMALS has the
3205 -- effect of warning on unreferenced entities
3206 -- other than subprogram formals.
3208 -- UNUSED Activates warnings to be generated for entities
3209 -- that are defined but not referenced, and for
3210 -- units that are with'ed and not referenced. In
3211 -- the case of packages, a warning is also
3212 -- generated if no entities in the package are
3213 -- referenced. This means that if the package
3214 -- is referenced but the only references are in
3215 -- use clauses or renames declarations, a warning
3216 -- is still generated. A warning is also generated
3217 -- for a generic package that is with'ed but never
3218 -- instantiated. In the case where a package or
3219 -- subprogram body is compiled, and there is a
3220 -- with on the corresponding spec that is only
3221 -- referenced in the body, a warning is also
3222 -- generated, noting that the with can be moved
3223 -- to the body. The default is that such warnings
3224 -- are not generated.
3226 -- NOUNUSED Suppress warnings for unused entities and
3229 -- VARIABLES_UNINITIALIZED Activates warnings on unassigned variables.
3230 -- Causes warnings to be generated when a variable
3231 -- is accessed which may not be properly
3233 -- The default is that such warnings are
3236 -- NOVARIABLES_UNINITIALIZED Suppress warnings for uninitialized
3239 S_GCC_WarnX : aliased constant S := "/NOWARNINGS " &
3241 -- NODOC (see /WARNINGS)
3243 S_GCC_No_Back : aliased constant S := "/NO_BACK_END_WARNINGS " &
3245 -- /NO_BACK_END_WARNINGS
3247 -- Inhibit all warning messages of the GCC back-end.
3249 S_GCC_All_Back : aliased constant S := "/ALL_BACK_END_WARNINGS " &
3251 -- /ALL_BACK_END_WARNINGS
3253 -- Activate all warning messages of the GCC back-end.
3255 S_GCC_Wide : aliased constant S := "/WIDE_CHARACTER_ENCODING=" &
3268 -- /NOWIDE_CHARACTER_ENCODING (D)
3269 -- /WIDE_CHARACTER_ENCODING[=encode-type]
3271 -- Specifies the mechanism used to encode wide characters. 'encode-type'
3272 -- is one of the following:
3274 -- BRACKETS (D) A wide character is encoded as ["xxxx"] where XXXX
3275 -- are four hexadecimal digits representing the coding
3276 -- ('Pos value) of the character in type
3277 -- Wide_Character. The hexadecimal digits may use upper
3278 -- or lower case letters.
3280 -- This notation can also be used for upper half
3281 -- Character values using the format ["xx"] where XX is
3282 -- two hexadecimal digits representing the coding ('Pos
3283 -- value) of the character in type Character (or
3284 -- Wide_Character). The hexadecimal digits may use upper
3287 -- NONE No wide characters are allowed. Same
3288 -- as /NOWIDE_CHARACTER_ENCODING.
3290 -- HEX In this encoding, a wide character is represented by
3291 -- the following five character sequence: ESC a b c d
3292 -- Where 'a', 'b', 'c', and 'd' are the four hexadecimal
3293 -- characters (using uppercase letters) of the wide
3294 -- character code. For example, ESC A345 is used to
3295 -- represent the wide character with code 16#A345#. This
3296 -- scheme is compatible with use of the full
3297 -- Wide_Character set.
3299 -- UPPER The wide character with encoding 16#abcd# where the
3300 -- upper bit is on (in other words, "a" is in the range
3301 -- 8-F) is represented as two bytes, 16#ab# and 16#cd#.
3302 -- The second byte may never be a format control
3303 -- character, but is not required to be in the upper
3304 -- half. This method can be also used for shift-JIS or
3305 -- EUC, where the internal coding matches the external
3308 -- SHIFT_JIS A wide character is represented by a two-character
3309 -- sequence, 16#ab# and 16#cd#, with the restrictions
3310 -- described for upper-half encoding as described above.
3311 -- The internal character code is the corresponding JIS
3312 -- character according to the standard algorithm for
3313 -- Shift-JIS conversion. Only characters defined in the
3314 -- JIS code set table can be used with this encoding
3317 -- UTF8 A wide character is represented using
3318 -- UCS Transformation Format 8 (UTF-8) as defined in Annex
3319 -- R of ISO 10646-1/Am.2. Depending on the character
3320 -- value, the representation is a one, two, or three byte
3323 -- 16#0000#-16#007f#: 2#0xxxxxxx#
3324 -- 16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx#
3325 -- 16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#
3327 -- where the xxx bits correspond to the left-padded bits
3328 -- of the 16-bit character value. Note that all lower
3329 -- half ASCII characters are represented as ASCII bytes
3330 -- and all upper half characters and other wide characters
3331 -- are represented as sequences of upper-half (The full
3332 -- UTF-8 scheme allows for encoding 31-bit characters as
3333 -- 6-byte sequences, but in this implementation, all UTF-8
3334 -- sequences of four or more bytes length will be treated
3337 -- EUC A wide character is represented by a two-character
3338 -- sequence 16#ab# and 16#cd#, with both characters being
3339 -- in the upper half. The internal character code is the
3340 -- corresponding JIS character according to the EUC
3341 -- encoding algorithm. Only characters defined in the JIS
3342 -- code set table can be used with this encoding method.
3344 S_GCC_WideX : aliased constant S := "/NOWIDE_CHARACTER_ENCODING " &
3346 -- NODOC (see /WIDE_CHARACTER_ENCODING)
3348 S_GCC_Xdebug : aliased constant S := "/XDEBUG " &
3353 -- Output expanded source files for source level debugging.
3354 -- The expanded source (see /EXPAND_SOURCE) is written to files
3355 -- with names formed by appending "_DG" to the input file name,
3356 -- The debugging information generated by the /DEBUG qualifier will then
3357 -- refer to the generated file. This allows source level debugging using
3358 -- the generated code which is sometimes useful for complex code, for
3359 -- example to find out exactly which part of a complex construction
3360 -- raised an exception. The maximum line length for the output is 72.
3362 S_GCC_Lxdebug : aliased constant S := "/LXDEBUG=#" &
3366 -- Output expanded source files for source level debugging.
3367 -- The expanded source (see /EXPAND_SOURCE) is written to files
3368 -- with names formed by appending "_DG" to the input file name,
3369 -- The debugging information generated by the /DEBUG qualifier will then
3370 -- refer to the generated file. This allows source level debugging using
3371 -- the generated code which is sometimes useful for complex code, for
3372 -- example to find out exactly which part of a complex construction
3373 -- raised an exception. The parameter is the maximum line length for
3376 S_GCC_Xref : aliased constant S := "/XREF=" &
3383 -- Normally the compiler generates full cross-referencing information in
3384 -- the .ALI file. This information is used by a number of tools,
3385 -- including GNAT FIND and GNAT XREF.
3387 -- GENERATE (D) Generate cross-referencing information.
3389 -- SUPPRESS Suppress cross-referencing information.
3390 -- This saves some space and may slightly
3391 -- speed up compilation, but means that some
3392 -- tools cannot be used.
3394 GCC_Switches : aliased constant Switches :=
3395 (S_GCC_Ada_83 'Access,
3396 S_GCC_Ada_95 'Access,
3397 S_GCC_Ada_05 'Access,
3400 S_GCC_AValid 'Access,
3401 S_GCC_Checks 'Access,
3402 S_GCC_ChecksX 'Access,
3403 S_GCC_Compres 'Access,
3404 S_GCC_Config 'Access,
3405 S_GCC_Current 'Access,
3406 S_GCC_Debug 'Access,
3407 S_GCC_DebugX 'Access,
3410 S_GCC_DistX 'Access,
3411 S_GCC_Error 'Access,
3412 S_GCC_ErrorX 'Access,
3413 S_GCC_Expand 'Access,
3414 S_GCC_Lexpand 'Access,
3415 S_GCC_Extend 'Access,
3418 S_GCC_Follow 'Access,
3419 S_GCC_Force 'Access,
3421 S_GCC_Generate'Access,
3424 S_GCC_Ident 'Access,
3425 S_GCC_IdentX 'Access,
3426 S_GCC_Ignore 'Access,
3427 S_GCC_Immed 'Access,
3428 S_GCC_Inline 'Access,
3429 S_GCC_InlineX 'Access,
3430 S_GCC_Intsrc 'Access,
3432 S_GCC_JustX 'Access,
3433 S_GCC_Length 'Access,
3435 S_GCC_Output 'Access,
3436 S_GCC_Machine 'Access,
3437 S_GCC_Mapping 'Access,
3439 S_GCC_Nesting 'Access,
3440 S_GCC_Noadc 'Access,
3441 S_GCC_Noload 'Access,
3442 S_GCC_Nostinc 'Access,
3443 S_GCC_Nostlib 'Access,
3446 S_GCC_Pointer 'Access,
3447 S_GCC_Polling 'Access,
3448 S_GCC_Project 'Access,
3450 S_GCC_Report 'Access,
3451 S_GCC_ReportX 'Access,
3452 S_GCC_Repinfo 'Access,
3453 S_GCC_RepinfX 'Access,
3455 S_GCC_Search 'Access,
3456 S_GCC_Style 'Access,
3457 S_GCC_StyleX 'Access,
3458 S_GCC_Subdirs 'Access,
3459 S_GCC_Symbol 'Access,
3460 S_GCC_Syntax 'Access,
3461 S_GCC_Table 'Access,
3462 S_GCC_Trace 'Access,
3465 S_GCC_Units 'Access,
3466 S_GCC_Unique 'Access,
3467 S_GCC_Upcase 'Access,
3468 S_GCC_Valid 'Access,
3469 S_GCC_Verbose 'Access,
3470 S_GCC_Verb_Asm'Access,
3472 S_GCC_WarnX 'Access,
3474 S_GCC_WideX 'Access,
3475 S_GCC_No_Back 'Access,
3476 S_GCC_All_Back'Access,
3477 S_GCC_Xdebug 'Access,
3478 S_GCC_Lxdebug 'Access,
3479 S_GCC_Xref 'Access);
3481 ----------------------------
3482 -- Switches for GNAT ELIM --
3483 ----------------------------
3485 S_Elim_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
3487 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
3489 -- Add directories to the project search path.
3491 S_Elim_All : aliased constant S := "/ALL " &
3496 -- Also look for subprograms from the GNAT run time that can be
3497 -- eliminated. Note that when 'gnat.adc' is produced using this switch,
3498 -- the entire program must be recompiled with qualifier /ALL_FILES of
3501 S_Elim_Bind : aliased constant S := "/BIND_FILE=<" &
3503 -- /BIND_FILE=file_name
3505 -- Specifies file_name as the bind file to process. If this qualifier is
3506 -- not used, the name of the bind file is computed from the full expanded
3507 -- Ada name of a main subprogram.
3509 S_Elim_Comp : aliased constant S := "/COMPILER=@" &
3511 -- /COMPILER=path_name
3513 -- Instructs GNAT ELIM to use a specific gcc compiler instead of one
3514 -- available on the path.
3516 S_Elim_Config : aliased constant S := "/CONFIGURATION_PRAGMAS=<" &
3518 -- /CONFIGURATION_PRAGMAS=path_name
3520 -- Specifies a file that contains configuration pragmas.
3521 -- The file must be specified with absolute path.
3523 S_Elim_Current : aliased constant S := "/CURRENT_DIRECTORY " &
3525 -- /CURRENT_DIRECTORY (D)
3526 -- /NOCURRENT_DIRECTORY
3528 -- Look for source files in the default directory.
3530 S_Elim_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
3532 -- /EXTERNAL_REFERENCE="name=val"
3534 -- Specifies an external reference to the project manager. Useful only if
3535 -- /PROJECT_FILE is used.
3538 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
3540 S_Elim_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
3542 -- /NOFOLLOW_LINKS_FOR_FILES (D)
3543 -- /FOLLOW_LINKS_FOR_FILES
3545 -- Follow links when parsing project files
3547 S_Elim_GNATMAKE : aliased constant S := "/GNATMAKE=@" &
3549 -- /GNATMAKE=path_name
3551 -- Instructs GNAT MAKE to use a specific gnatmake instead of one available
3554 S_Elim_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
3561 -- /MESSAGES_PROJECT_FILE[=messages-option]
3563 -- Specifies the "verbosity" of the parsing of project files.
3564 -- messages-option may be one of the following:
3566 -- DEFAULT (D) No messages are output if there is no error or warning.
3568 -- MEDIUM A small number of messages are output.
3570 -- HIGH A great number of messages are output, most of them not
3571 -- being useful for the user.
3573 S_Elim_Project : aliased constant S := "/PROJECT_FILE=<" &
3575 -- /PROJECT_FILE=filename
3577 -- Specifies the main project file to be used. The project files rooted
3578 -- at the main project file will be parsed before the invocation of the
3579 -- gnatelim. The source directories to be searched will be communicated
3580 -- to gnatelim through logical name ADA_PRJ_INCLUDE_FILE.
3582 S_Elim_Quiet : aliased constant S := "/QUIET " &
3587 -- Quiet mode: by default GNAT ELIM outputs to the standard error stream
3588 -- the number of program units left to be processed. This option turns
3591 S_Elim_Search : aliased constant S := "/SEARCH=*" &
3593 -- /SEARCH=(directory, ...)
3595 -- When looking for source files also look in the specified directories.
3597 S_Elim_Subdirs : aliased constant S := "/SUBDIRS=<" &
3601 -- The actual directories (object, exec, library, ...) are subdirectories
3602 -- of the directory specified in the project file. If the subdirectory
3603 -- does not exist, it is created automatically.
3605 S_Elim_Verb : aliased constant S := "/VERBOSE " &
3610 -- Verbose mode: GNAT ELIM version information is output as Ada comments
3611 -- to the standard output stream. Also, in addition to the number of
3612 -- program units left, GNAT ELIM will output the name of the current unit
3615 Elim_Switches : aliased constant Switches :=
3616 (S_Elim_Add 'Access,
3618 S_Elim_Bind 'Access,
3619 S_Elim_Comp 'Access,
3620 S_Elim_Config 'Access,
3621 S_Elim_Current 'Access,
3623 S_Elim_Follow 'Access,
3624 S_Elim_GNATMAKE'Access,
3625 S_Elim_Mess 'Access,
3626 S_Elim_Project 'Access,
3627 S_Elim_Quiet 'Access,
3628 S_Elim_Search 'Access,
3629 S_Elim_Subdirs 'Access,
3630 S_Elim_Verb 'Access);
3632 ----------------------------
3633 -- Switches for GNAT FIND --
3634 ----------------------------
3636 S_Find_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
3638 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
3640 -- Add directories to the project search path.
3642 S_Find_All : aliased constant S := "/ALL_FILES " &
3647 -- If this switch is present, FIND and XREF will parse the read-only
3648 -- files found in the library search path. Otherwise, these files will
3649 -- be ignored. This option can be used to protect Gnat sources or your
3650 -- own libraries from being parsed, thus making FIND and XREF much
3651 -- faster, and their output much smaller.
3653 S_Find_Deriv : aliased constant S := "/DERIVED_TYPE_INFORMATION " &
3655 -- /NODERIVED_TYPE_INFORMATION (D)
3656 -- /DERIVED_TYPE_INFORMATION
3658 -- Output the parent type reference for each matching derived types.
3660 S_Find_Expr : aliased constant S := "/EXPRESSIONS " &
3662 -- /NOEXPRESSIONS (D)
3665 -- By default, FIND accepts the simple regular expression set for pattern.
3666 -- If this switch is set, then the pattern will be considered as a full
3667 -- Unix-style regular expression.
3669 S_Find_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
3671 -- /EXTERNAL_REFERENCE="name=val"
3673 -- Specifies an external reference to the project manager. Useful only if
3674 -- /PROJECT_FILE is used.
3677 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
3679 S_Find_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
3681 -- /NOFOLLOW_LINKS_FOR_FILES (D)
3682 -- /FOLLOW_LINKS_FOR_FILES
3684 -- Follow links when parsing project files
3686 S_Find_Full : aliased constant S := "/FULL_PATHNAME " &
3688 -- /NOFULL_PATHNAME (D)
3691 -- If this switch is set, the output file names will be preceded by their
3692 -- directory (if the file was found in the search path). If this switch
3693 -- is not set, the directory will not be printed.
3695 S_Find_Ignore : aliased constant S := "/IGNORE_LOCALS " &
3697 -- /NOIGNORE_LOCALS (D)
3700 -- If this switch is set, information is output only for library-level
3701 -- entities, ignoring local entities. The use of this switch may
3702 -- accelerate FIND and XREF.
3704 S_Find_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
3711 -- /MESSAGES_PROJECT_FILE[=messages-option]
3713 -- Specifies the "verbosity" of the parsing of project files.
3714 -- messages-option may be one of the following:
3716 -- DEFAULT (D) No messages are output if there is no error or warning.
3718 -- MEDIUM A small number of messages are output.
3720 -- HIGH A great number of messages are output, most of them not
3721 -- being useful for the user.
3723 S_Find_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
3727 -- Do not look for sources in the system default directory.
3729 S_Find_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
3733 -- Do not look for library files in the system default directory.
3735 S_Find_Object : aliased constant S := "/OBJECT_SEARCH=*" &
3737 -- /OBJECT_SEARCH=(directory,...)
3739 -- When searching for library and object files, look in the specified
3740 -- directories. The order in which library files are searched is the same
3743 S_Find_Print : aliased constant S := "/PRINT_LINES " &
3745 -- /NOPRINT_LINES (D)
3748 -- Output the content of the Ada source file lines were the entity was
3751 S_Find_Project : aliased constant S := "/PROJECT=@" &
3755 -- Specify a project file to use. By default, FIND and XREF will try to
3756 -- locate a project file in the current directory.
3758 -- If a project file is either specified or found by the tools, then the
3759 -- content of the source directory and object directory lines are added
3760 -- as if they had been specified respectively by /SOURCE_SEARCH and
3763 -- This qualifier is not compatible with /PROJECT_FILE
3765 S_Find_Prj : aliased constant S := "/PROJECT_FILE=<" &
3767 -- /PROJECT_FILE=filename
3769 -- Specifies the main project file to be used. The project files rooted
3770 -- at the main project file will be parsed before looking for sources.
3771 -- The source and object directories to be searched will be communicated
3772 -- to gnatfind through logical names ADA_PRJ_INCLUDE_FILE and
3773 -- ADA_PRJ_OBJECTS_FILE.
3775 S_Find_Ref : aliased constant S := "/REFERENCES " &
3777 -- /NOREFERENCES (D)
3780 -- By default, FIND will output only the information about the
3781 -- declaration, body or type completion of the entities. If this switch
3782 -- is set, the FIND will locate every reference to the entities in the
3783 -- files specified on the command line (or in every file in the search
3784 -- path if no file is given on the command line).
3786 S_Find_Search : aliased constant S := "/SEARCH=*" &
3788 -- /SEARCH=(directory,...)
3791 -- /OBJECT_SEARCH=(directory,...) /SOURCE_SEARCH=(directory,...)
3793 S_Find_Source : aliased constant S := "/SOURCE_SEARCH=*" &
3795 -- /SOURCE_SEARCH=(directory,...)
3797 -- When looking for source files also look in the specified directories.
3798 -- The order in which source file search is undertaken is the same as for
3801 S_Find_Subdirs : aliased constant S := "/SUBDIRS=<" &
3805 -- The actual directories (object, exec, library, ...) are subdirectories
3806 -- of the directory specified in the project file. If the subdirectory
3807 -- does not exist, it is created automatically.
3809 S_Find_Types : aliased constant S := "/TYPE_HIERARCHY " &
3811 -- /NOTYPE_HIERARCHY (D)
3814 -- Output the type hierarchy for the specified type. It acts like the
3815 -- /DERIVED_TYPE_INFORMATION qualifier, but recursively from parent type
3816 -- to parent type. When this qualifier is specified it is not possible to
3817 -- specify more than one file.
3819 Find_Switches : aliased constant Switches :=
3820 (S_Find_Add 'Access,
3822 S_Find_Deriv 'Access,
3823 S_Find_Expr 'Access,
3825 S_Find_Follow 'Access,
3826 S_Find_Full 'Access,
3827 S_Find_Ignore 'Access,
3828 S_Find_Mess 'Access,
3829 S_Find_Nostinc 'Access,
3830 S_Find_Nostlib 'Access,
3831 S_Find_Object 'Access,
3832 S_Find_Print 'Access,
3833 S_Find_Project 'Access,
3836 S_Find_Search 'Access,
3837 S_Find_Source 'Access,
3838 S_Find_Subdirs 'Access,
3839 S_Find_Types 'Access);
3841 ------------------------------
3842 -- Switches for GNAT KRUNCH --
3843 ------------------------------
3845 S_Krunch_Count : aliased constant S := "/COUNT=#" &
3850 -- Limit file names to nnn characters (where nnn is a decimal
3851 -- integer). The maximum file name length is 39, but if you want to
3852 -- generate a set of files that would be usable if ported to a system
3853 -- with some different maximum file length, then a different value can
3856 Krunch_Switches : aliased constant Switches :=
3857 (1 .. 1 => S_Krunch_Count 'Access);
3859 ----------------------------
3860 -- Switches for GNAT LINK --
3861 ----------------------------
3863 S_Link_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
3865 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
3867 -- Add directories to the project search path.
3869 S_Link_Bind : aliased constant S := "/BIND_FILE=" &
3874 -- /BIND_FILE=[bind-file-option]
3876 -- Specifies the language of the binder generated file.
3878 -- ADA (D) Binder file is Ada.
3880 -- C Binder file is 'C'.
3882 S_Link_Debug : aliased constant S := "/DEBUG=" &
3892 -- /DEBUG[=debug-option]
3894 -- Specifies the amount of debugging information included. 'debug-option'
3895 -- is one of the following:
3897 -- ALL (D) Include full debugging information.
3899 -- NONE Provide no debugging information. Same as /NODEBUG.
3901 -- TRACEBACK Provide sufficient debug information for a traceback.
3903 -- NOTRACEBACK Same as NONE.
3905 S_Link_Nodebug : aliased constant S := "/NODEBUG " &
3907 -- NODOC (see /DEBUG)
3909 S_Link_Execut : aliased constant S := "/EXECUTABLE=@" &
3911 -- /EXECUTABLE=exec-name
3913 -- 'exec-name' specifies an alternative name for the generated executable
3914 -- program. If this qualifier switch is omitted, the executable is called
3915 -- the name of the main unit. So "$ GNAT LINK TRY.ALI" creates an
3916 -- executable called TRY.EXE.
3918 S_Link_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
3920 -- /EXTERNAL_REFERENCE="name=val"
3922 -- Specifies an external reference to the project manager. Useful only if
3923 -- /PROJECT_FILE is used.
3926 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
3928 S_Link_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
3930 -- /NOFOLLOW_LINKS_FOR_FILES (D)
3931 -- /FOLLOW_LINKS_FOR_FILES
3933 -- Follow links when parsing project files
3935 S_Link_Forlink : aliased constant S := "/FOR_LINKER=" & '"' &
3936 "--for-linker=" & '"';
3937 -- /FOR_LINKER=<string>
3939 -- Transmit the option <string> to the underlying linker.
3941 S_Link_Force : aliased constant S := "/FORCE_OBJECT_FILE_LIST " &
3943 -- /NOFORCE_OBJECT_FILE_LIST (D)
3944 -- /FORCE_OBJECT_FILE_LIST
3946 -- Forces the generation of a file that contains commands for the linker.
3947 -- This is useful in some cases to deal with special situations where the
3948 -- command line length is exceeded.
3950 S_Link_Ident : aliased constant S := "/IDENTIFICATION=" & '"' &
3951 "--for-linker=IDENT=" &
3953 -- /IDENTIFICATION="<string>"
3955 -- "<string>" specifies the string to be stored in the image file ident-
3956 -- ification field in the image header. It overrides any pragma Ident
3957 -- specified string.
3959 S_Link_Libdir : aliased constant S := "/LIBDIR=*" &
3961 -- /LIBDIR=(directory, ...)
3963 -- Look for libraries in the specified directories.
3965 S_Link_Library : aliased constant S := "/LIBRARY=|" &
3969 -- Link with library named "xyz".
3971 S_Link_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
3978 -- /MESSAGES_PROJECT_FILE[=messages-option]
3980 -- Specifies the "verbosity" of the parsing of project files.
3981 -- messages-option may be one of the following:
3983 -- DEFAULT (D) No messages are output if there is no error or warning.
3985 -- MEDIUM A small number of messages are output.
3987 -- HIGH A great number of messages are output, most of them not
3988 -- being useful for the user.
3990 S_Link_Nocomp : aliased constant S := "/NOCOMPILE " &
3994 -- Do not compile the file generated by the binder.
3995 -- This may be used when a link is rerun with different options,
3996 -- but there is no need to recompile the binder generated file.
3998 S_Link_Noinhib : aliased constant S := "/NOINHIBIT-EXEC " &
3999 "--for-linker=--noinhibit-exec";
4002 -- Delete executable if there are errors or warnings.
4004 S_Link_Nofiles : aliased constant S := "/NOSTART_FILES " &
4008 -- Link in default image initialization and startup functions.
4010 S_Link_Project : aliased constant S := "/PROJECT_FILE=<" &
4012 -- /PROJECT_FILE=filename
4014 -- Specifies the main project file to be used. The project files rooted
4015 -- at the main project file will be parsed before the invocation of the
4017 -- The source and object directories to be searched will be communicated
4018 -- to the linker through logical names ADA_PRJ_INCLUDE_FILE and
4019 -- ADA_PRJ_OBJECTS_FILE.
4021 S_Link_Return : aliased constant S := "/RETURN_CODES=" &
4023 "!-mvms-return-codes " &
4025 "-mvms-return-codes";
4026 -- /RETURN_CODES=POSIX (D)
4027 -- /RETURN_CODES=VMS
4029 -- Specifies the style of codes returned by
4030 -- Ada.Command_Line.Set_Exit_Status. Must be used in conjunction with
4031 -- and match the Bind qualifier with the same name.
4033 -- POSIX (D) Return Posix compatible exit codes.
4035 -- VMS Return VMS compatible exit codes. The value returned
4036 -- is identically equal to the Set_Exit_Status parameter.
4038 S_Link_Static : aliased constant S := "/STATIC " &
4039 "--for-linker=-static";
4043 -- Indicate to the linker that the link is static.
4045 S_Link_Subdirs : aliased constant S := "/SUBDIRS=<" &
4049 -- The actual directories (object, exec, library, ...) are subdirectories
4050 -- of the directory specified in the project file. If the subdirectory
4051 -- does not exist, it is created automatically.
4053 S_Link_Verb : aliased constant S := "/VERBOSE " &
4058 -- Causes additional information to be output, including a full list of
4059 -- the included object files. This switch option is most useful when you
4060 -- want to see what set of object files are being used in the link step.
4062 S_Link_ZZZZZ : aliased constant S := "/<other> " &
4066 -- Any other switch that will be transmitted to the underlying linker.
4068 Link_Switches : aliased constant Switches :=
4069 (S_Link_Add 'Access,
4070 S_Link_Bind 'Access,
4071 S_Link_Debug 'Access,
4072 S_Link_Nodebug 'Access,
4073 S_Link_Execut 'Access,
4075 S_Link_Follow 'Access,
4076 S_Link_Forlink 'Access,
4077 S_Link_Force 'Access,
4078 S_Link_Ident 'Access,
4079 S_Link_Libdir 'Access,
4080 S_Link_Library 'Access,
4081 S_Link_Mess 'Access,
4082 S_Link_Nocomp 'Access,
4083 S_Link_Nofiles 'Access,
4084 S_Link_Noinhib 'Access,
4085 S_Link_Project 'Access,
4086 S_Link_Return 'Access,
4087 S_Link_Static 'Access,
4088 S_Link_Subdirs 'Access,
4089 S_Link_Verb 'Access,
4090 S_Link_ZZZZZ 'Access);
4092 ----------------------------
4093 -- Switches for GNAT LIST --
4094 ----------------------------
4096 S_List_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
4098 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
4100 -- Add directories to the project search path.
4102 S_List_All : aliased constant S := "/ALL_UNITS " &
4107 -- Consider all units, including those of the predefined Ada library.
4108 -- Especially useful with /DEPENDENCIES.
4110 S_List_Allproj : aliased constant S := "/ALL_PROJECTS " &
4112 -- /NOALL_PROJECTS (D)
4115 -- When used with a project file and no file specified, indicate
4116 -- that gnatls should be called for all sources of all projects in
4117 -- the project tree.
4119 S_List_Current : aliased constant S := "/CURRENT_DIRECTORY " &
4121 -- /CURRENT_DIRECTORY (D)
4122 -- /NOCURRENT_DIRECTORY
4124 -- Look for source, library or object files in the default directory.
4126 S_List_Depend : aliased constant S := "/DEPENDENCIES " &
4128 -- /NODEPENDENCIES (D)
4131 S_List_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
4133 -- /EXTERNAL_REFERENCE="name=val"
4135 -- Specifies an external reference to the project manager. Useful only if
4136 -- /PROJECT_FILE is used.
4139 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
4141 S_List_Files : aliased constant S := "/FILES=@" &
4145 -- Take as arguments the files that are listed in the specified
4148 S_List_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
4150 -- /NOFOLLOW_LINKS_FOR_FILES (D)
4151 -- /FOLLOW_LINKS_FOR_FILES
4153 -- Follow links when parsing project files
4155 S_List_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
4162 -- /MESSAGES_PROJECT_FILE[=messages-option]
4164 -- Specifies the "verbosity" of the parsing of project files.
4165 -- messages-option may be one of the following:
4167 -- DEFAULT (D) No messages are output if there is no error or warning.
4169 -- MEDIUM A small number of messages are output.
4171 -- HIGH A great number of messages are output, most of them not
4172 -- being useful for the user.
4174 S_List_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
4178 -- Do not look for sources of the run time in the standard directory.
4180 S_List_Object : aliased constant S := "/OBJECT_SEARCH=*" &
4182 -- /OBJECT_SEARCH=(directory,...)
4184 -- When looking for library and object files look also in the specified
4187 S_List_Output : aliased constant S := "/OUTPUT=" &
4200 -- /OUTPUT=(option,option,...)
4202 -- SOURCES (D) Only output information about source files.
4204 -- DEPEND List sources from which specified units depend on.
4206 -- OBJECTS Only output information about object files.
4208 -- UNITS Only output information about compilation units.
4210 -- OPTIONS Output the list of options.
4212 -- VERBOSE Output the complete source and object paths.
4213 -- Do not use the default column layout but instead
4214 -- use long format giving as much as information
4215 -- possible on each requested units, including
4216 -- special characteristics.
4218 S_List_Project : aliased constant S := "/PROJECT_FILE=<" &
4220 -- /PROJECT_FILE=filename
4222 -- Specifies the main project file to be used. The project files rooted
4223 -- at the main project file will be parsed before doing any listing.
4224 -- The source and object directories to be searched will be communicated
4225 -- to gnatlist through logical names ADA_PRJ_INCLUDE_FILE and
4226 -- ADA_PRJ_OBJECTS_FILE.
4228 S_List_Search : aliased constant S := "/SEARCH=*" &
4230 -- /SEARCH=(directory,...)
4232 -- Search the specified directories for both source and object files.
4234 S_List_Source : aliased constant S := "/SOURCE_SEARCH=*" &
4236 -- /SOURCE_SEARCH=(directory,...)
4238 -- When looking for source files also look in the specified directories.
4240 S_List_Subdirs : aliased constant S := "/SUBDIRS=<" &
4244 -- The actual directories (object, exec, library, ...) are subdirectories
4245 -- of the directory specified in the project file. If the subdirectory
4246 -- does not exist, it is created automatically.
4248 List_Switches : aliased constant Switches :=
4249 (S_List_Add 'Access,
4251 S_List_Allproj 'Access,
4252 S_List_Current 'Access,
4253 S_List_Depend 'Access,
4255 S_List_Files 'Access,
4256 S_List_Follow 'Access,
4257 S_List_Mess 'Access,
4258 S_List_Nostinc 'Access,
4259 S_List_Object 'Access,
4260 S_List_Output 'Access,
4261 S_List_Project 'Access,
4262 S_List_Search 'Access,
4263 S_List_Source 'Access,
4264 S_List_Subdirs 'Access);
4266 ----------------------------
4267 -- Switches for GNAT MAKE --
4268 ----------------------------
4270 S_Make_Actions : aliased constant S := "/ACTIONS=" &
4277 -- /ACTIONS=(keyword[,...])
4279 -- GNAT MAKE default behavior is to check if the sources are up to date,
4280 -- compile those sources that are not up to date, bind the main source,
4281 -- then link the executable.
4283 -- With the /ACTIONS qualifier, GNAT MAKE may be restricted to one or
4284 -- two of these three steps:
4291 -- You may specify one or more of the following keywords to the /ACTIONS
4294 -- BIND Bind only. Can be combined with /ACTIONS=COMPILE
4295 -- to do compilation and binding, but no linking.
4296 -- Can be combined with /ACTIONS=LINK to do binding and
4297 -- linking. When not combined with /ACTIONS=COMPILE,
4298 -- all the units in the closure of the main program must
4299 -- have been previously compiled and must be up to date.
4301 -- COMPILE Compile only. Do not perform binding, except when
4302 -- /ACTIONS=BIND is also specified. Do not perform
4303 -- linking, except if both /ACTIONS=BIND and /ACTIONS=LINK
4304 -- are also specified.
4306 -- LINK Link only. Can be combined with /ACTIONS=BIND to do
4307 -- binding and linking. Linking will not be performed
4308 -- if combined with /ACTIONS=COMPILE but not with
4309 -- /ACTIONS=BIND\. When not combined with /ACTIONS=BIND
4310 -- all the units in the closure of the main program must
4311 -- have been previously compiled and must be up to date,
4312 -- and the main program need to have been bound.
4314 S_Make_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
4316 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
4318 -- Add directories to the project search path.
4320 S_Make_All : aliased constant S := "/ALL_FILES " &
4325 -- Consider all files in the make process, even the GNAT internal system
4326 -- files (for example, the predefined Ada library files). By default,
4327 -- GNAT MAKE does not check these files (however, if there is an
4328 -- installation problem, it will be caught when GNAT MAKE binds your
4329 -- program). You may have to specify this qualifier if you are working on
4330 -- GNAT itself. The vast majority of GNAT MAKE users never need to
4331 -- specify this switch. All GNAT internal files with will be compiled
4332 -- with /STYLE_CHECK=GNAT.
4334 S_Make_Allproj : aliased constant S := "/ALL_PROJECTS " &
4336 -- /NOALL_PROJECTS (D)
4340 -- When used without project files, it is equivalent to /UNIQUE.
4341 -- When used with a project file with no main (neither on the command
4342 -- line nor in the attribute Main) check every source of every project,
4343 -- recompile all sources that are not up to date and rebuild libraries
4346 S_Make_Bind : aliased constant S := "/BINDER_QUALIFIERS=?" &
4348 -- /BINDER_QUALIFIERS
4350 -- Any qualifiers specified after this qualifier other than
4351 -- /COMPILER_QUALIFIERS, /LINKER_QUALIFIERS and /MAKE_QUALIFIERS will be
4352 -- passed to any GNAT BIND commands generated by GNAT MAKE.
4354 S_Make_Bindprj : aliased constant S := "/BND_LNK_FULL_PROJECT " &
4356 -- /BND_LNK_FULL_PROJECT
4358 -- Bind and link all sources of a project, without any consideration
4359 -- to attribute Main, if there is one. This qualifier need to be
4360 -- used in conjunction with the /PROJECT_FILE= qualifier and cannot
4361 -- be used with a main subprogram on the command line or for
4362 -- a library project file. As the binder is invoked with the option
4363 -- meaning "No Ada main subprogram", the user must ensure that the
4364 -- proper options are specified to the linker. This qualifier is
4365 -- normally used when the main subprogram is in a foreign language
4368 S_Make_Comp : aliased constant S := "/COMPILER_QUALIFIERS=?" &
4370 -- /COMPILER_QUALIFIERS
4372 -- Any qualifiers specified after this qualifier other than
4373 -- /BINDER_QUALIFIERS, /LINKER_QUALIFIERS and /MAKE_QUALIFIERS will be
4374 -- passed to any GNAT COMPILE commands generated by GNAT MAKE.
4376 S_Make_Cond : aliased constant S := "/CONDITIONAL_SOURCE_SEARCH=*" &
4378 -- /CONDITIONAL_SOURCE_SEARCH=dir
4380 -- Equivalent to "/SOURCE_SEARCH=dir /SKIP_MISSING=dir".
4382 S_Make_Cont : aliased constant S := "/CONTINUE_ON_ERROR " &
4384 -- /NOCONTINUE_ON_ERROR (D)
4385 -- /CONTINUE_ON_ERROR
4387 -- Keep going. Continue as much as possible after a compilation error.
4388 -- To ease the programmer's task in case of compilation errors, the list
4389 -- of sources for which the compile fails is given when GNAT MAKE
4392 S_Make_Current : aliased constant S := "/CURRENT_DIRECTORY " &
4394 -- /CURRENT_DIRECTORY (D)
4395 -- /NOCURRENT_DIRECTORY
4397 -- Look for source, library or object files in the default directory.
4399 S_Make_Dep : aliased constant S := "/DEPENDENCIES_LIST " &
4401 -- /NODEPENDENCIES_LIST (D)
4402 -- /DEPENDENCIES_LIST
4404 -- Check if all objects are up to date. If they are, output the object
4405 -- dependences to SYS$OUTPUT in a form that can be directly exploited in
4406 -- a Unix-style Makefile. By default, each source file is prefixed with
4407 -- its (relative or absolute) directory name. This name is whatever you
4408 -- specified in the various /SOURCE_SEARCH and /SEARCH qualifiers. If
4409 -- you also specify the /QUIET qualifier, only the source file names,
4410 -- without relative paths, are output. If you just specify the
4411 -- /DEPENDENCY_LIST qualifier, dependencies of the GNAT internal system
4412 -- files are omitted. This is typically what you want. If you also
4413 -- specify the /ALL_FILES qualifier, dependencies of the GNAT internal
4414 -- files are also listed. Note that dependencies of the objects in
4415 -- external Ada libraries (see the /SKIP_MISSING qualifier) are never
4418 S_Make_Dirobj : aliased constant S := "/DIRECTORY_OBJECTS=@" &
4420 -- /DIRECTORY_OBJECTS=<file>
4422 -- Put all object files and .ALI files in <file>.
4423 -- This qualifier is not compatible with /PROJECT_FILE.
4425 S_Make_Disprog : aliased constant S := "/DISPLAY_PROGRESS " &
4427 -- /NOPLAY_PROGRESS (D)
4428 -- /DISPLAY_PROGRESS
4430 -- Display progress for each source, up to date or not, as a single line
4431 -- completed x out of y (zz%)
4432 -- If the file needs to be compiled this is displayed after the
4433 -- invocation of the compiler. These lines are displayed even in quiet
4434 -- output mode (/QUIET).
4436 S_Make_Doobj : aliased constant S := "/DO_OBJECT_CHECK " &
4438 -- /NODO_OBJECT_CHECK (D)
4441 -- Don't compile, bind, or link. Output a single command that will
4442 -- recompile an out of date unit, if any. Repeated use of this option,
4443 -- followed by carrying out the indicated compilation, will eventually
4444 -- result in recompiling all required units.
4446 -- If any ALI is missing during the process, GNAT MAKE halts and
4447 -- displays an error message.
4449 S_Make_Execut : aliased constant S := "/EXECUTABLE=@" &
4451 -- /EXECUTABLE=exec-name
4453 -- The name of the final executable program will be 'exec_name'. If this
4454 -- qualifier is omitted the default name for the executable will be the
4455 -- name of the input file with an EXE filetype. You may prefix
4456 -- 'exec_name' with a relative or absolute directory path.
4458 S_Make_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
4460 -- /EXTERNAL_REFERENCE="name=val"
4462 -- Specifies an external reference to the project manager. Useful only if
4463 -- /PROJECT_FILE is used.
4466 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
4468 S_Make_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
4470 -- /NOFOLLOW_LINKS_FOR_FILES (D)
4471 -- /FOLLOW_LINKS_FOR_FILES
4473 -- Follow links when parsing project files
4475 S_Make_Force : aliased constant S := "/FORCE_COMPILE " &
4477 -- /NOFORCE_COMPILE (D)
4480 -- Force recompilations. Recompile all sources, even though some object
4481 -- files may be up to date, but don't recompile predefined or GNAT
4482 -- internal files unless the /ALL_FILES qualifier is also specified.
4484 S_Make_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " &
4486 -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D)
4487 -- /FULL_PATH_IN_BRIEF_MESSAGES
4489 -- When using project files, if some errors or warnings are detected
4490 -- during parsing and verbose mode is not in effect (no use of qualifier
4491 -- /VERBOSE), then error lines start with the full path name of the
4492 -- project file, rather than its simple file name.
4494 S_Make_Hi_Verb : aliased constant S := "/HIGH_VERBOSITY " &
4496 -- /NOHIGH_VERBOSITY (D)
4499 -- Displays the reason for all recompilations GNAT MAKE decides are
4500 -- necessary, in high verbosity. Equivalent to /VERBOSE.
4502 S_Make_Inplace : aliased constant S := "/IN_PLACE " &
4507 -- In normal mode, GNAT MAKE compiles all object files and ALI files
4508 -- into the current directory. If the /IN_PLACE switch is used,
4509 -- then instead object files and ALI files that already exist are over-
4510 -- written in place. This means that once a large project is organized
4511 -- into separate directories in the desired manner, then GNAT MAKE will
4512 -- automatically maintain and update this organization. If no ALI files
4513 -- are found on the Ada object path, the new object and ALI files are
4514 -- created in the directory containing the source being compiled.
4516 S_Make_Index : aliased constant S := "/SOURCE_INDEX=#" &
4518 -- /SOURCE_INDEX=nnn
4520 -- Specifies the index of the units in the source file
4521 -- By default, source files are mono-unit and there is no index
4522 -- When /SOURCE_INDEX=nnn is specified, only one main may be specified
4523 -- on the command line.
4525 S_Make_Library : aliased constant S := "/LIBRARY_SEARCH=*" &
4527 -- /LIBRARY_SEARCH=(directory[,...])
4529 -- Add the specified directories to the list of directories in which the
4530 -- linker will search for libraries.
4532 S_Make_Link : aliased constant S := "/LINKER_QUALIFIERS=?" &
4534 -- /LINKER_QUALIFIERS
4536 -- Any qualifiers specified after this qualifier other than
4537 -- /COMPILER_QUALIFIERS, /BINDER_QUALIFIERS and /MAKE_QUALIFIERS will be
4538 -- passed to any GNAT LINK commands generated by GNAT LINK.
4540 S_Make_Low_Verb : aliased constant S := "/LOW_VERBOSITY " &
4542 -- /NOLOW_VERBOSITY (D)
4545 -- Displays the reason for all recompilations GNAT MAKE decides are
4546 -- necessary, in low verbosity, that is with less output than
4547 -- /MEDIUM_VERBOSITY, /HIGH_VERBOSITY or /VERBOSE.
4549 S_Make_Make : aliased constant S := "/MAKE_QUALIFIERS=?" &
4553 -- Any qualifiers specified after this qualifier other than
4554 -- /COMPILER_QUALIFIERS, /BINDER_QUALIFIERS and /LINKER_QUALIFIERS
4555 -- are for the benefit of GNAT MAKE itself.
4557 S_Make_Mapping : aliased constant S := "/MAPPING " &
4562 -- Use a mapping file. A mapping file is a way to communicate to the
4563 -- compiler two mappings: from unit names to file names (without any
4564 -- directory information) and from file names to path names (with full
4565 -- directory information). These mappings are used by the compiler to
4566 -- short-circuit the path search. When GNAT MAKE is invoked with this
4567 -- qualifier, it will create a mapping file, initially populated by the
4568 -- project manager, if /PROJECT_File= is used, otherwise initially empty.
4569 -- Each invocation of the compiler will add the newly accessed sources to
4570 -- the mapping file. This will improve the source search during the next
4571 -- invocations of the compiler
4573 S_Make_Med_Verb : aliased constant S := "/MEDIUM_VERBOSITY " &
4575 -- /NOMEDIUM_VERBOSITY (D)
4576 -- /MEDIUM_VERBOSITY
4578 -- Displays the reason for all recompilations GNAT MAKE decides are
4579 -- necessary, in medium verbosity, that is with potentially less output
4580 -- than /HIGH_VERBOSITY or /VERBOSE.
4582 S_Make_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
4589 -- /MESSAGES_PROJECT_FILE[=messages-option]
4591 -- Specifies the "verbosity" of the parsing of project files.
4592 -- messages-option may be one of the following:
4594 -- DEFAULT (D) No messages are output if there is no error or warning.
4596 -- MEDIUM A small number of messages are output.
4598 -- HIGH A great number of messages are output, most of them not
4599 -- being useful for the user.
4601 S_Make_Minimal : aliased constant S := "/MINIMAL_RECOMPILATION " &
4603 -- /NOMINIMAL_RECOMPILATION (D)
4604 -- /MINIMAL_RECOMPILATION
4606 -- Specifies that the minimum necessary amount of recompilation
4607 -- be performed. In this mode GNAT MAKE ignores time stamp differences
4608 -- when the only modifications to a source file consist in
4609 -- adding/removing comments, empty lines, spaces or tabs.
4611 S_Make_Missing : aliased constant S := "/CREATE_MISSING_DIRS " &
4613 -- /NOCREATE_MISSING_DIRS (D)
4614 -- /CREATE_MISSING_DIRS
4616 -- When an object directory, a library directory or an exec directory
4617 -- in missing, attempt to create the directory.
4619 S_Make_Nolink : aliased constant S := "/NOLINK " &
4623 -- Compile only. Do not perform binding and linking. If the root unit is
4624 -- not a main unit, this is the default. Otherwise GNAT MAKE will
4625 -- attempt binding and linking unless all objects are up to date and the
4626 -- executable is more recent than the objects.
4627 -- This is equivalent to /ACTIONS=COMPILE
4629 S_Make_Nomain : aliased constant S := "/NOMAIN " &
4633 -- No main subprogram. Bind and link the program even if the unit name
4634 -- given on the command line is a package name. The resulting executable
4635 -- will execute the elaboration routines of the package and its closure,
4636 -- then the finalization routines.
4638 S_Make_Nonpro : aliased constant S := "/NON_PROJECT_UNIT_COMPILATION " &
4640 -- /NON_PROJECT_UNIT_COMPILATION
4642 -- Normally, when using project files, a unit that is not part of any
4643 -- project file, cannot be compile. These units may be compile, when
4644 -- needed, if this qualifier is specified.
4646 S_Make_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
4650 -- Do not look for sources the in the system default directory.
4652 S_Make_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
4656 -- Do not look for library files in the system default directory.
4658 S_Make_Object : aliased constant S := "/OBJECT_SEARCH=*" &
4660 -- /OBJECT_SEARCH=(directory[,...])
4662 -- When looking for library and object files look also in the specified
4665 S_Make_Proc : aliased constant S := "/PROCESSES=#" &
4670 -- Use NNN processes to carry out the (re)compilations. If you have a
4671 -- multiprocessor machine, compilations will occur in parallel. In the
4672 -- event of compilation errors, messages from various compilations might
4673 -- get interspersed (but GNAT MAKE will give you the full ordered list of
4674 -- failing compiles at the end). This can at times be annoying. To get a
4675 -- clean list of error messages don't use this qualifier.
4677 S_Make_Nojobs : aliased constant S := "/NOPROCESSES " &
4679 -- NODOC (see /PROCESS)
4681 S_Make_Project : aliased constant S := "/PROJECT_FILE=<" &
4683 -- /PROJECT_FILE=filename
4685 -- Specifies the main project file to be used. The project files rooted
4686 -- at the main project file will be parsed before any other processing to
4687 -- set the building environment.
4689 S_Make_Quiet : aliased constant S := "/QUIET " &
4694 -- When this qualifiers is specified, the commands carried out by GNAT
4695 -- MAKE are not displayed.
4697 S_Make_Reason : aliased constant S := "/REASONS " &
4702 -- Displays the reason for all recompilations GNAT MAKE decides are
4705 S_Make_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
4707 -- /RUNTIME_SYSTEM=xxx
4709 -- Build against an alternate runtime system named xxx or RTS-xxx.
4711 S_Make_Search : aliased constant S := "/SEARCH=*" &
4713 -- /SEARCH=(directory[,...])
4715 -- Search the specified directories for both source and object files.
4717 S_Make_Skip : aliased constant S := "/SKIP_MISSING=*" &
4719 -- /SKIP_MISSING=(directory[,...])
4721 -- Skip missing library sources if ALI in 'directory'.
4723 S_Make_Source : aliased constant S := "/SOURCE_SEARCH=*" &
4725 -- /SOURCE_SEARCH=(directory[,...])
4727 -- When looking for source files also look in the specified directories.
4729 S_Make_Stand : aliased constant S := "/STANDARD_OUTPUT_FOR_COMMANDS " &
4731 -- /NOSTANDARD_OUTPUT_FOR_COMMANDS (D)
4732 -- /STANDARD_OUTPUT_FOR_COMMANDS
4734 -- Output the commands for the compiler, the binder and the linker
4735 -- on SYS$OUTPUT, instead of SYS$ERROR.
4737 S_Make_Subdirs : aliased constant S := "/SUBDIRS=<" &
4741 -- The actual directories (object, exec, library, ...) are subdirectories
4742 -- of the directory specified in the project file. If the subdirectory
4743 -- does not exist, it is created automatically.
4745 S_Make_Switch : aliased constant S := "/SWITCH_CHECK " &
4747 -- /NOSWITCH_CHECK (D)
4750 -- Recompile if compiler switches have changed since last compilation.
4751 -- All compiler switches but -I and -o are taken into account in the
4752 -- following way: orders between different "first letter" switches are
4753 -- ignored, but orders between same switches are taken into account.
4754 -- For example, -O -O2 is different than -O2 -O, but -g -O is equivalent
4757 S_Make_Unique : aliased constant S := "/UNIQUE " &
4762 -- Recompile at most the main file. It implies /ACTIONS=COMPILE.
4763 -- Combined with /FORCE_COMPILE, it is equivalent to calling the compiler
4766 S_Make_Use_Map : aliased constant S := "/USE_MAPPING_File=@" &
4768 -- /USE_MAPPING_FILE=file_name
4770 -- Use a specific mapping file. The file 'file_name', specified as a path
4771 -- name (absolute or relative) by this qualifier, should already exist,
4772 -- otherwise the qualifier is ineffective. The specified mapping file
4773 -- will be communicated to the compiler. This switch is not compatible
4774 -- with a project file (/PROJECT_FILE=) or with multiple compiling
4775 -- processes (/PROCESSES=nnn, when nnn is greater than 1).
4777 S_Make_Verbose : aliased constant S := "/VERBOSE " &
4782 -- Displays the reason for all recompilations GNAT MAKE decides are
4785 Make_Switches : aliased constant Switches :=
4786 (S_Make_Add 'Access,
4787 S_Make_Actions 'Access,
4789 S_Make_Allproj 'Access,
4790 S_Make_Bind 'Access,
4791 S_Make_Comp 'Access,
4792 S_Make_Cond 'Access,
4793 S_Make_Cont 'Access,
4794 S_Make_Current 'Access,
4796 S_Make_Dirobj 'Access,
4797 S_Make_Disprog 'Access,
4798 S_Make_Doobj 'Access,
4799 S_Make_Execut 'Access,
4801 S_Make_Follow 'Access,
4802 S_Make_Force 'Access,
4803 S_Make_Full 'Access,
4804 S_Make_Hi_Verb 'Access,
4805 S_Make_Inplace 'Access,
4806 S_Make_Index 'Access,
4807 S_Make_Library 'Access,
4808 S_Make_Link 'Access,
4809 S_Make_Low_Verb'Access,
4810 S_Make_Make 'Access,
4811 S_Make_Mapping 'Access,
4812 S_Make_Med_Verb'Access,
4813 S_Make_Mess 'Access,
4814 S_Make_Minimal 'Access,
4815 S_Make_Missing 'Access,
4816 S_Make_Nolink 'Access,
4817 S_Make_Nomain 'Access,
4818 S_Make_Nonpro 'Access,
4819 S_Make_Nostinc 'Access,
4820 S_Make_Nostlib 'Access,
4821 S_Make_Object 'Access,
4822 S_Make_Proc 'Access,
4823 S_Make_Nojobs 'Access,
4824 S_Make_Project 'Access,
4825 S_Make_Quiet 'Access,
4826 S_Make_Reason 'Access,
4828 S_Make_Search 'Access,
4829 S_Make_Skip 'Access,
4830 S_Make_Source 'Access,
4831 S_Make_Stand 'Access,
4832 S_Make_Subdirs 'Access,
4833 S_Make_Switch 'Access,
4834 S_Make_Unique 'Access,
4835 S_Make_Use_Map 'Access,
4836 S_Make_Verbose 'Access);
4838 ------------------------------
4839 -- Switches for GNAT METRIC --
4840 ------------------------------
4842 S_Metric_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
4844 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
4846 -- Add directories to the project search path.
4848 S_Metric_All_Prjs : aliased constant S := "/ALL_PROJECTS " &
4850 -- /NOALL_PROJECTS (D)
4852 -- When GNAT METRIC is used with a Project File and no source is
4853 -- specified, the underlying tool gnatmetric is called for all the
4854 -- sources of all the Project Files in the project tree.
4856 S_Metric_Debug : aliased constant S := "/DEBUG_OUTPUT " &
4860 -- Generate the debug information
4862 S_Metric_Direct : aliased constant S := "/DIRECTORY=@" &
4864 -- /DIRECTORY=pathname
4866 -- Put the files with detailed metric information into the specified
4869 S_Metric_Element : aliased constant S := "/ELEMENT_METRICS=" &
4871 "!-ed,!-es,!-enl,!-eps," &
4872 "!-eas,!-ept,!-eat,!-enu," &
4874 "DECLARATION_TOTAL " &
4876 "STATEMENT_TOTAL " &
4878 "LOOP_NESTING_MAX " &
4880 "INT_SUBPROGRAMS " &
4882 "SUBPROGRAMS_ALL " &
4888 "PROGRAM_NESTING_MAX " &
4890 "CONSTRUCT_NESTING_MAX " &
4892 -- NODOC (see /SYNTAX_METRICS)
4894 S_Metric_Syntax : aliased constant S := "/SYNTAX_METRICS=" &
4898 "--no-syntax-all " &
4899 "DECLARATIONS_ON " &
4901 "DECLARATIONS_OFF " &
4902 "--no-declarations " &
4906 "--no-statements " &
4907 "PUBLIC_SUBPROGRAMS_ON " &
4908 "--public-subprograms " &
4909 "PUBLIC_SUBPROGRAMS_OFF " &
4910 "--no-public-subprograms " &
4911 "ALL_SUBPROGRAMS_ON " &
4912 "--all-subprograms " &
4913 "ALL_SUBPROGRAMS_OFF " &
4914 "--no-all-subprograms " &
4915 "PUBLIC_TYPES_ON " &
4917 "PUBLIC_TYPES_OFF " &
4918 "--no-public-types " &
4923 "UNIT_NESTING_ON " &
4925 "UNIT_NESTING_OFF " &
4926 "--no-unit-nesting " &
4927 "CONSTRUCT_NESTING_ON " &
4928 "--construct-nesting " &
4929 "CONSTRUCT_NESTING_OFF " &
4930 "--no-construct-nesting";
4931 -- /SYNTAX_METRICS(option, option ...)
4933 -- Specifies the syntax element metrics to be computed (if at least one
4934 -- positive syntax element metric, line metric, complexity or coupling
4935 -- metric is specified then only explicitly specified syntax element
4936 -- metrics are computed and reported)
4938 -- option may be one of the following:
4940 -- ALL_ON (D) All the syntax element metrics are computed
4941 -- ALL_OFF None of syntax element metrics is computed
4942 -- DECLARATIONS_ON Compute the total number of declarations
4943 -- DECLARATIONS_OFF Do not compute the total number of
4945 -- STATEMENTS_ON Compute the total number of statements
4946 -- STATEMENTS_OFF Do not compute the total number of
4948 -- PUBLIC_SUBPROGRAMS_ON Compute the number of public subprograms
4949 -- PUBLIC_SUBPROGRAMS_OFF Do not compute the number of public
4951 -- ALL_SUBPROGRAMS_ON Compute the number of all the subprograms
4952 -- ALL_SUBPROGRAMS_OFF Do not compute the number of all the
4954 -- PUBLIC_TYPES_ON Compute the number of public types
4955 -- PUBLIC_TYPES_OFF Do not compute the number of public types
4956 -- ALL_TYPES_ON Compute the number of all the types
4957 -- ALL_TYPES_OFF Do not compute the number of all the types
4958 -- UNIT_NESTING_ON Compute the maximal program unit nesting
4960 -- UNIT_NESTING_OFF Do not compute the maximal program unit
4962 -- CONSTRUCT_NESTING_ON Compute the maximal construct nesting level
4963 -- CONSTRUCT_NESTING_OFF Do not compute the maximal construct nesting
4966 -- All combinations of syntax element metrics options are allowed.
4968 S_Metric_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
4970 -- /EXTERNAL_REFERENCE="name=val"
4972 -- Specifies an external reference to the project manager. Useful only if
4973 -- /PROJECT_FILE is used.
4976 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
4978 S_Metric_Files : aliased constant S := "/FILES=@" &
4982 -- Take as arguments the files that are listed in the specified
4985 S_Metric_Format : aliased constant S := "/FORMAT_OUTPUT=" &
4992 "SHORT_SOURCE_FILE_NAME " &
4994 -- /FORMAT_OUTPUT=(option, option ...)
4996 -- Specifies the details of the tool output
4998 -- option may be one of the following:
5000 -- DEFAULT (D) Generate the text output only, use full
5001 -- argument source names in global information
5002 -- XML Generate the output in XML format
5003 -- NO_TEXT Do not generate the text output (implies XML)
5004 -- SHORT_SOURCE_FILE_NAME Use short argument source names in output
5006 S_Metric_Globout : aliased constant S := "/GLOBAL_OUTPUT=@" &
5008 -- /GLOBAL_OUTPUT=filename
5010 -- Put the textual global metric information into the specified file
5012 S_Metric_Line : aliased constant S := "/LINE_METRICS=" &
5014 "!-la,!-lcode,!-lcomm," &
5022 "MIXED_CODE_COMMENTS " &
5024 "COMMENT_PERCENTAGE " &
5028 "AVERAGE_LINES_IN_BODIES " &
5030 -- NODOC (see /LINE_COUNT_METRICS)
5032 S_Metric_Lines : aliased constant S := "/LINE_COUNT_METRICS=" &
5044 "--no-lines-code " &
5045 "COMMENT_LINES_ON " &
5046 "--lines-comment " &
5047 "COMMENT_LINES_OFF " &
5048 "--no-lines-comment " &
5049 "CODE_COMMENT_LINES_ON " &
5050 "--lines-eol-comment " &
5051 "CODE_COMMENT_LINES_OFF " &
5052 "--no-lines-eol-comment " &
5053 "COMMENT_PERCENTAGE_ON " &
5055 "COMMENT_PERCENTAGE_OFF " &
5056 "--no-lines-ratio " &
5059 "BLANK_LINES_OFF " &
5060 "--no-lines-blank " &
5061 "AVERAGE_BODY_LINES_ON " &
5062 "--lines-average " &
5063 "AVERAGE_BODY_LINES_OFF " &
5064 "--no-lines-average";
5065 -- /LINE_COUNT_METRICS=(option, option ...)
5067 -- Specifies the line metrics to be computed (if at least one positive
5068 -- syntax element metric, line metric, complexity or coupling metric is
5069 -- specified then only explicitly specified line metrics are computed
5072 -- option may be one of the following:
5074 -- ALL_ON (D) All the line metrics are computed
5075 -- ALL_OFF None of line metrics is computed
5076 -- ALL_LINES_ON All lines are computed
5077 -- ALL_LINES_OFF All lines are not computed
5078 -- CODE_LINES_ON Lines with Ada code are computed
5079 -- CODE_LINES_OFF Lines with Ada code are not computed
5080 -- COMMENT_LINES_ON Comment lines are computed
5081 -- COMMENT_LINES_OFF Comment lines are not computed
5082 -- COMMENT_PERCENTAGE_ON Ratio between comment lines and all the
5083 -- lines containing comments and program code
5085 -- COMMENT_PERCENTAGE_OFF Ratio between comment lines and all the
5086 -- lines containing comments and program code
5088 -- BLANK_LINES_ON Blank lines are computed
5089 -- BLANK_LINES_OFF Blank lines are not computed
5090 -- AVERAGE_BODY_LINES_ON Average number of code lines in subprogram,
5091 -- task and entry bodies and statement
5092 -- sequences of package bodies is computed
5093 -- AVERAGE_BODY_LINES_OFF Average number of code lines in subprogram,
5094 -- task and entry bodies and statement
5095 -- sequences of package bodies is not computed
5097 -- All combinations of line metrics options are allowed.
5099 S_Metric_Complexity : aliased constant S := "/COMPLEXITY_METRICS=" &
5101 "--complexity-all " &
5103 "--no-complexity-all " &
5105 "--complexity-cyclomatic " &
5107 "--no-complexity-cyclomatic "&
5109 "--complexity-essential " &
5111 "--no-complexity-essential " &
5112 "LOOP_NESTING_ON " &
5114 "LOOP_NESTING_OFF " &
5115 "--no-loop-nesting " &
5116 "AVERAGE_COMPLEXITY_ON " &
5117 "--complexity-average " &
5118 "AVERAGE_COMPLEXITY_OFF " &
5119 "--no-complexity-average " &
5120 "EXTRA_EXIT_POINTS_ON " &
5121 "--extra-exit-points " &
5122 "EXTRA_EXIT_POINTS_OFF " &
5123 "--no-extra-exit-points";
5124 -- /COMPLEXITY_METRICS=(option, option ...)
5126 -- Specifies the complexity metrics to be computed (if at least one
5127 -- positive syntax element metric, line metric, complexity or coupling
5128 -- metric is specified then only explicitly specified complexity metrics
5129 -- are computed and reported)
5131 -- option may be one of the following:
5133 -- ALL_ON (D) All the complexity metrics are computed
5134 -- ALL_OFF None of complexity metrics is computed
5135 -- CYCLOMATIC_ON Compute the McCabe Cyclomatic Complexity
5136 -- CYCLOMATIC_OFF Do not compute the McCabe Cyclomatic
5138 -- ESSENTIAL_ON Compute the Essential Complexity
5139 -- ESSENTIAL_OFF Do not compute the Essential Complexity
5140 -- LOOP_NESTIMG_ON Compute the maximal loop nesting
5141 -- LOOP_NESTIMG_OFF Do not compute the maximal loop nesting
5142 -- AVERAGE_COMPLEXITY_ON Compute the average complexity for
5143 -- executable bodies
5144 -- AVERAGE_COMPLEXITY_OFF Do not compute the average complexity for
5145 -- executable bodies
5146 -- EXTRA_EXIT_POINTS_ON Compute extra exit points metric
5147 -- EXTRA_EXIT_POINTS_OFF Do not compute extra exit points metric
5149 -- All combinations of line metrics options are allowed.
5151 S_Metric_Coupling : aliased constant S := "/COUPLING_METRICS=" &
5155 "--no-coupling-all " &
5156 "PACKAGE_EFFERENT_ON " &
5157 "--package-efferent-coupling " &
5158 "PACKAGE_EFFERENT_OFF " &
5159 "--no-package-efferent-coupling " &
5160 "PACKAGE_AFFERENT_ON " &
5161 "--package-afferent-coupling " &
5162 "PACKAGE_AFFERENT_OFF " &
5163 "--no-package-afferent-coupling " &
5164 "CATEGORY_EFFERENT_ON " &
5165 "--category-efferent-coupling " &
5166 "CATEGORY_EFFERENT_OFF " &
5167 "--no-category-efferent-coupling " &
5168 "CATEGORY_AFFERENT_ON " &
5169 "--category-afferent-coupling " &
5170 "CATEGORY_AFFERENT_OFF " &
5171 "--no-category-afferent-coupling";
5173 -- /COUPLING_METRICS=(option, option ...)
5175 -- Specifies the coupling metrics to be computed.
5177 -- option may be one of the following:
5179 -- ALL_ON All the coupling metrics are computed
5180 -- ALL_OFF (D) None of coupling metrics is computed
5181 -- PACKAGE_EFFERENT_ON Compute package efferent coupling
5182 -- PACKAGE_EFFERENT_OFF Do not compute package efferent coupling
5183 -- PACKAGE_AFFERENT_ON Compute package afferent coupling
5184 -- PACKAGE_AFFERENT_OFF Do not compute package afferent coupling
5185 -- CATEGORY_EFFERENT_ON Compute category efferent coupling
5186 -- CATEGORY_EFFERENT_OFF Do not compute category efferent coupling
5187 -- CATEGORY_AFFERENT_ON Compute category afferent coupling
5188 -- CATEGORY_AFFERENT_OFF Do not compute category afferent coupling
5190 -- All combinations of coupling metrics options are allowed.
5192 S_Metric_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
5194 -- /NOFOLLOW_LINKS_FOR_FILES (D)
5195 -- /FOLLOW_LINKS_FOR_FILES
5197 -- Follow links when parsing project files
5199 S_Metric_No_Local : aliased constant S := "/NO_LOCAL_DETAILS " &
5201 -- /LOCAL_DETAILS (D)
5202 -- /NO_LOCAL_DETAILS
5204 -- Do not compute the detailed metrics for local program units.
5206 S_Metric_No_Exits_As_Gotos : aliased constant S := "/NO_EXITS_AS_GOTOS " &
5208 -- /EXITS_AS_GOTOS (D)
5209 -- /NO_EXITS_AS_GOTOS
5211 -- Do not count EXIT statements as GOTOs when computing the Essential
5214 S_Metric_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
5221 -- /MESSAGES_PROJECT_FILE[=messages-option]
5223 -- Specifies the "verbosity" of the parsing of project files.
5224 -- messages-option may be one of the following:
5226 -- DEFAULT (D) No messages are output if there is no error or warning.
5228 -- MEDIUM A small number of messages are output.
5230 -- HIGH A great number of messages are output, most of them not
5231 -- being useful for the user.
5233 S_Metric_Project : aliased constant S := "/PROJECT_FILE=<" &
5235 -- /PROJECT_FILE=filename
5237 -- Specifies the main project file to be used. The project files rooted
5238 -- at the main project file will be parsed before the invocation of the
5241 S_Metric_Quiet : aliased constant S := "/QUIET " &
5246 -- Quiet mode: by default GNAT METRIC outputs to the standard error stream
5247 -- the number of program units left to be processed. This option turns
5250 S_Metric_Subdirs : aliased constant S := "/SUBDIRS=<" &
5254 -- The actual directories (object, exec, library, ...) are subdirectories
5255 -- of the directory specified in the project file. If the subdirectory
5256 -- does not exist, it is created automatically.
5258 S_Metric_Suffix : aliased constant S := "/SUFFIX_DETAILS=" & '"' &
5260 -- /SUFFIX_DETAILS=suffix
5262 -- Use the given suffix as the suffix for the name of the file to place
5263 -- the detailed metrics into.
5265 S_Metric_Suppress : aliased constant S := "/SUPPRESS=" &
5267 "!-nocc,!-noec,!-nonl," &
5269 "CYCLOMATIC_COMPLEXITY " &
5271 "ESSENTIAL_COMPLEXITY " &
5273 "MAXIMAL_LOOP_NESTING " &
5279 -- NODOC (see /COMPLEXITY_METRICS /NO_LOCAL_DETAILS /NO_EXITS_AS_GOTOS)
5281 S_Metric_Verbose : aliased constant S := "/VERBOSE " &
5288 S_Metric_XMLout : aliased constant S := "/XML_OUTPUT=@" &
5290 -- /XML_OUTPUT=filename
5292 -- Place the XML output into the specified file
5294 Metric_Switches : aliased constant Switches :=
5295 (S_Metric_Add 'Access,
5296 S_Metric_All_Prjs 'Access,
5297 S_Metric_Complexity 'Access,
5298 S_Metric_Coupling 'Access,
5299 S_Metric_Debug 'Access,
5300 S_Metric_Direct 'Access,
5301 S_Metric_Element 'Access,
5302 S_Metric_Ext 'Access,
5303 S_Metric_Files 'Access,
5304 S_Metric_Follow 'Access,
5305 S_Metric_Format 'Access,
5306 S_Metric_Globout 'Access,
5307 S_Metric_Line 'Access,
5308 S_Metric_Lines 'Access,
5309 S_Metric_Mess 'Access,
5310 S_Metric_No_Exits_As_Gotos'Access,
5311 S_Metric_No_Local 'Access,
5312 S_Metric_Project 'Access,
5313 S_Metric_Quiet 'Access,
5314 S_Metric_Suffix 'Access,
5315 S_Metric_Subdirs 'Access,
5316 S_Metric_Syntax 'Access,
5317 S_Metric_Suppress 'Access,
5318 S_Metric_Verbose 'Access,
5319 S_Metric_XMLout 'Access);
5321 ----------------------------
5322 -- Switches for GNAT NAME --
5323 ----------------------------
5325 S_Name_Conf : aliased constant S := "/CONFIG_FILE=<" &
5327 -- /CONFIG_FILE=path_name
5329 -- Create a configuration pragmas file 'path_name' (instead of the default
5330 -- 'gnat.adc'). 'path_name' may include directory information. 'path_name'
5331 -- must be writable. There may be only one qualifier /CONFIG_FILE.
5332 -- This qualifier is not compatible with qualifier /PROJECT_FILE.
5334 S_Name_Dirs : aliased constant S := "/SOURCE_DIRS=*" &
5336 -- /SOURCE_DIRS=(directory, ...)
5338 -- Look for source files in the specified directories. When this qualifier
5339 -- is specified, the current working directory will not be searched for
5340 -- source files, unless it is explicitly specified with a qualifier
5341 -- /SOURCE_DIRS or /DIRS_FILE. Several qualifiers /SOURCE_DIRS may be
5342 -- specified. If a directory is specified as a relative path, it is
5343 -- relative to the directory of the configuration pragmas file specified
5344 -- with qualifier /CONFIG_FILE, or to the directory of the project file
5345 -- specified with qualifier /PROJECT_FILE or, if neither qualifier
5346 -- /CONFIG_FILE nor qualifier /PROJECT_FILE are specified, it is relative
5347 -- to the current working directory. The directories specified with
5348 -- qualifiers /SOURCE_DIRS must exist and be readable.
5350 S_Name_Dfile : aliased constant S := "/DIRS_FILE=<" &
5352 -- /DIRS_FILE=file_name
5354 -- Look for source files in all directories listed in text file
5355 -- 'file_name'. 'file_name' must be an existing, readable text file.
5356 -- Each non empty line in the specified file must be a directory.
5357 -- Specifying qualifier /DIRS_FILE is equivalent to specifying as many
5358 -- qualifiers /SOURCE_DIRS as there are non empty lines in the specified
5361 S_Name_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
5363 -- /NOFOLLOW_LINKS_FOR_FILES (D)
5364 -- /FOLLOW_LINKS_FOR_FILES
5366 -- Follow links when parsing project files
5368 S_Name_Frng : aliased constant S := "/FOREIGN_PATTERN=" & '"' &
5370 -- /FOREIGN_PATTERN=<string>
5372 -- Specify a foreign pattern.
5373 -- Using this qualifier, it is possible to add sources of languages other
5374 -- than Ada to the list of sources of a project file. It is only useful
5375 -- if a qualifier /PROJECT_FILE is used. For example,
5377 -- GNAT NAME /PROJECT_FILE=PRJ /FOREIGN_PATTERN="*.C" "*.ADA"
5379 -- will look for Ada units in all files with the '.ADA' extension, and
5380 -- will add to the list of file for project PRJ.GPR the C files with
5383 S_Name_Help : aliased constant S := "/HELP " &
5388 -- Output usage information to the standard output stream.
5390 S_Name_Proj : aliased constant S := "/PROJECT_FILE=<" &
5392 -- /PROJECT_FILE=file_name
5394 -- Create or update a project file. 'file_name' may include directory
5395 -- information. The specified file must be writable. There may be only
5396 -- one qualifier /PROJECT_FILE. When a qualifier /PROJECT_FILE is
5397 -- specified, no qualifier /CONFIG_FILE may be specified.
5399 S_Name_Subdirs : aliased constant S := "/SUBDIRS=<" &
5403 -- The actual directories (object, exec, library, ...) are subdirectories
5404 -- of the directory specified in the project file. If the subdirectory
5405 -- does not exist, it is created automatically.
5407 S_Name_Verbose : aliased constant S := "/VERBOSE " &
5412 -- Verbose mode. Output detailed explanation of behavior to the standard
5413 -- output stream. This includes name of the file written, the name of the
5414 -- directories to search and, for each file in those directories whose
5415 -- name matches at least one of the Naming Patterns, an indication of
5416 -- whether the file contains a unit, and if so the name of the unit.
5418 S_Name_Excl : aliased constant S := "/EXCLUDED_PATTERN=" & '"' &
5420 -- /EXCLUDED_PATTERN=<string>
5422 -- Specify an excluded pattern.
5423 -- Using this qualifier, it is possible to exclude some files that would
5424 -- match the Naming patterns. For example,
5426 -- GNAT NAME /EXCLUDED_PATTERN="*_NT.ADA" "*.ADA"
5428 -- will look for Ada units in all files with the '.ADA' extension, except
5429 -- those whose names end with '_NT.ADA'.
5431 Name_Switches : aliased constant Switches :=
5432 (S_Name_Conf 'Access,
5433 S_Name_Dirs 'Access,
5434 S_Name_Dfile 'Access,
5435 S_Name_Follow 'Access,
5436 S_Name_Frng 'Access,
5437 S_Name_Help 'Access,
5438 S_Name_Proj 'Access,
5439 S_Name_Subdirs 'Access,
5440 S_Name_Verbose 'Access,
5441 S_Name_Excl 'Access);
5443 ----------------------------------
5444 -- Switches for GNAT PREPROCESS --
5445 ----------------------------------
5447 S_Prep_Assoc : aliased constant S := "/ASSOCIATE=" & '"' &
5449 -- /ASSOCIATE="name=val"
5451 -- Defines a new symbol, associated with value. If no value is given
5452 -- on the command line, then symbol is considered to be True.
5453 -- This qualifier can be used in place of a definition file.
5455 S_Prep_Blank : aliased constant S := "/BLANK_LINES " &
5457 -- /NOBLANK_LINES (D)
5460 -- Causes both preprocessor lines and the lines deleted by preprocessing
5461 -- to be replaced by blank lines in the output source file, thus
5462 -- preserving line numbers in the output file.
5464 S_Prep_Com : aliased constant S := "/COMMENTS " &
5469 -- /COMMENTS causes both preprocessor lines and the lines deleted
5470 -- by preprocessing to be retained in the output source as comments marked
5471 -- with the special string "--! ". This option will result in line numbers
5472 -- being preserved in the output file.
5474 -- /NOCOMMENTS causes both preprocessor lines and the lines deleted by
5475 -- preprocessing to be replaced by blank lines in the output source file,
5476 -- thus preserving line numbers in the output file.
5478 S_Prep_Ref : aliased constant S := "/REFERENCE " &
5483 -- Causes a "Source_Reference" pragma to be generated that references the
5484 -- original input file, so that error messages will use the file name of
5485 -- this original file. Also implies /BLANK_LINES if /COMMENTS is not
5488 S_Prep_Remove : aliased constant S := "/REMOVE " &
5493 -- Preprocessor lines and deleted lines are completely removed from the
5496 S_Prep_Replace : aliased constant S := "/REPLACE_IN_COMMENTS " &
5498 -- /NOREPLACE_IN_COMMENTS (D)
5499 -- /REPLACE_IN_COMMENTS
5501 -- Causes preprocessor to scan comments and perform replacements on
5502 -- any $symbol occurrences within the comment text.
5504 S_Prep_Symbols : aliased constant S := "/SYMBOLS " &
5509 -- Causes a sorted list of symbol names and values to be listed on
5512 S_Prep_Undef : aliased constant S := "/UNDEFINED " &
5517 Prep_Switches : aliased constant Switches :=
5518 (S_Prep_Assoc 'Access,
5519 S_Prep_Blank 'Access,
5522 S_Prep_Remove 'Access,
5523 S_Prep_Replace 'Access,
5524 S_Prep_Symbols 'Access,
5525 S_Prep_Undef 'Access);
5527 ------------------------------
5528 -- Switches for GNAT PRETTY --
5529 ------------------------------
5531 S_Pretty_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
5533 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
5535 -- Add directories to the project search path.
5537 S_Pretty_Align : aliased constant S := "/ALIGN=" &
5550 "COMPONENT_CLAUSES " &
5552 -- /ALIGN[=align-option, align-option, ...]
5554 -- Set alignments. By default, all alignments (colons in declarations,
5555 -- initialisations in declarations, assignments and arrow delimiters) are
5558 -- align-option may be one of the following:
5560 -- OFF (D) Set all alignments to OFF
5561 -- COLONS Set alignments of colons in declarations to ON
5562 -- DECLARATIONS Set alignments of initialisations in declarations
5564 -- STATEMENTS Set alignments of assignments statements to ON
5565 -- ARROWS Set alignments of arrow delimiters to ON.
5566 -- COMPONENT_CLAUSES Set alignments of AT keywords in component
5569 -- Specifying one of the ON options without first specifying the OFF
5570 -- option has no effect, because by default all alignments are set to ON.
5572 S_Pretty_All_Prjs : aliased constant S := "/ALL_PROJECTS " &
5574 -- /NOALL_PROJECTS (D)
5576 -- When GNAT PRETTY is used with a Project File and no source is
5577 -- specified, the underlying tool gnatpp is called for all the
5578 -- sources of all the Project Files in the project tree.
5580 S_Pretty_Attrib : aliased constant S := "/ATTRIBUTE_CASING=" &
5587 -- /ATTRIBUTE_CASING[=casing-option]
5589 -- Set the case of the attributes. By default the attributes are in mixed
5591 -- casing-option may be one of the following:
5597 S_Pretty_Comments : aliased constant S := "/COMMENTS_LAYOUT=" &
5602 "STANDARD_INDENT " &
5610 -- /COMMENTS_LAYOUT[=layout-option, layout-option, ...]
5612 -- Set the comment layout. By default, comments use the GNAT style
5613 -- comment line indentation.
5615 -- layout-option may be one of the following:
5617 -- UNTOUCHED All the comments remain unchanged
5618 -- DEFAULT (D) GNAT style comment line indentation
5619 -- STANDARD_INDENT Standard comment line indentation
5620 -- GNAT_BEGINNING GNAT style comment beginning
5621 -- REFORMAT Reformat comment blocks
5622 -- KEEP_SPECIAL Keep unchanged special form comments
5624 -- All combinations of layout options are allowed, except for DEFAULT
5625 -- and STANDARD_INDENT which are mutually exclusive, and also if
5626 -- UNTOUCHED is specified, this must be the only option.
5628 -- The difference between "GNAT style comment line indentation" and
5629 -- "standard comment line indentation" is the following: for standard
5630 -- comment indentation, any comment line is indented as if it were
5631 -- a declaration or statement at the same place.
5632 -- For GNAT style comment indentation, comment lines which are
5633 -- immediately followed by if or case statement alternative, record
5634 -- variant or 'begin' keyword are indented as the keyword that follows
5637 -- Standard indentation:
5646 -- GNAT style indentation:
5655 -- Option "GNAT style comment beginning" means that for each comment
5656 -- which is not considered as non-formattable separator (that is, the
5657 -- comment line contains only dashes, or a comment line ends with two
5658 -- dashes), there will be at least two spaces between starting "--" and
5659 -- the first non-blank character of the comment.
5661 S_Pretty_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" &
5663 -- /CONFIGURATION_PRAGMAS_FILE=file
5665 -- Specify a configuration pragmas file that need to be passed to the
5668 S_Pretty_Constr : aliased constant S := "/CONSTRUCT_LAYOUT=" &
5675 -- /CONSTRUCT_LAYOUT[=construct-option]
5677 -- Set construct layout. Default is GNAT style layout.
5678 -- construct-option may be one of the following:
5684 -- The difference between GNAT style and Compact layout on one hand
5685 -- and Uncompact layout on the other hand can be illustrated by the
5686 -- following examples:
5688 -- GNAT style and Uncompact layout
5691 -- type q is record type q is
5692 -- a : integer; record
5693 -- b : integer; a : integer;
5694 -- end record; b : integer;
5698 -- Block : declare Block :
5699 -- A : Integer := 3; declare
5700 -- begin A : Integer := 3;
5701 -- Proc (A, A); begin
5702 -- end Block; Proc (A, A);
5705 -- Clear : for J in 1 .. 10 loop Clear :
5706 -- A (J) := 0; for J in 1 .. 10 loop
5707 -- end loop Clear; A (J) := 0;
5711 -- A further difference between GNAT style layout and compact layout is
5712 -- that in GNAT style layout compound statements, return statements and
5713 -- bodies are always separated by empty lines.
5715 S_Pretty_Comind : aliased constant S := "/CONTINUATION_INDENT=#" &
5717 -- /CONTINUATION_INDENT=nnn
5719 -- Indentation level for continuation lines, nnn from 1 .. 9.
5720 -- The default value is one less then the (normal) indentation level,
5721 -- unless the indentation is set to 1: in that case the default value for
5722 -- continuation line indentation is also 1.
5724 S_Pretty_Compact_Is : aliased constant S := "/NO_SEPARATE_IS " &
5728 -- Do not place the IS keyword on a separate line in a subprogram body in
5729 -- case if the specification occupies more then one line.
5731 S_Pretty_Sep_Loop_Then : aliased constant S := "/SEPARATE_LOOP_THEN " &
5732 "--separate-loop-then";
5733 -- /SEPARATE_LOOP_THEN
5735 -- Place the THEN keyword in IF statement and the LOOP keyword in for-
5736 -- and while-loops on a separate line.
5738 S_Pretty_N_Sep_Loop_Then : aliased constant S := "/NO_SEPARATE_LOOP_THEN " &
5739 "--no-separate-loop-then";
5740 -- /NO_SEPARATE_LOOP_THEN
5742 -- Do not place the THEN keyword in IF statement and the LOOP keyword in
5743 -- for- and while-loops on a separate line.
5745 S_Pretty_Use_On_New_Line : aliased constant S := "/USE_ON_NEW_LINE " &
5746 "--use-on-new-line";
5749 -- Start any USE clause that is a part of a context clause from a
5752 S_Pretty_Stnm_On_Nw_Line : aliased constant S := "/STMT_NAME_ON_NEW_LINE " &
5753 "--separate-stmt-name";
5754 -- /STMT_NAME_ON_NEW_LINE
5756 -- For named block and loop statements use a separate line for the
5757 -- statement name, but do not use an extra indentation level for the
5758 -- statement itself.
5760 S_Pretty_Eol : aliased constant S := "/END_OF_LINE=" &
5769 -- /END_OF_LINE=[option]
5771 -- Specifies the form of the line terminators in the produced source.
5772 -- By default, the form of the line terminator depends on the platforms.
5773 -- On Unix and VMS, it is a Line Feed (LF) character. On Windows (DOS),
5774 -- It is a Carriage Return (CR) followed by a Line Feed.
5775 -- The Options DOS and CRLF are equivalent. The options UNIX and LF are
5778 S_Pretty_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
5780 -- /EXTERNAL_REFERENCE="name=val"
5782 -- Specifies an external reference to the project manager. Useful only if
5783 -- /PROJECT_FILE is used.
5786 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
5788 S_Pretty_Current : aliased constant S := "/CURRENT_DIRECTORY " &
5790 -- /CURRENT_DIRECTORY (D)
5792 -- Look for source files in the current working directory.
5794 -- /NOCURRENT_DIRECTORY
5795 -- Do not look for source files in the current working directory.
5797 S_Pretty_Dico : aliased constant S := "/DICTIONARY=*" &
5799 -- /DICTIONARY=(file_name, ...)
5801 -- Use each specified file as a dictionary file that defines the casing
5802 -- for a set of specified names, thereby overriding the effect on these
5803 -- names by any explicit or implicit /NAME_CASING qualifier.
5805 -- GNAT PRETTY implicitly uses a default dictionary file to define the
5806 -- casing for the Ada predefined names and the names declared in the GNAT
5809 -- The structure of a dictionary file, and details on the conventions
5810 -- used in the default dictionary file, are defined in the GNAT User's
5813 S_Pretty_Encoding : aliased constant S := "/RESULT_ENCODING=" &
5826 -- /RESULT_ENCODING[=encoding-type]
5828 -- Specify the wide character encoding method used when writing the
5829 -- reformatted code in the result file. 'encoding-type' is one of the
5832 -- BRACKETS (D) Brackets encoding.
5834 -- HEX Hex ESC encoding.
5836 -- UPPER Upper half encoding.
5838 -- SHIFT_JIS Shift-JIS encoding.
5840 -- EUC EUC Encoding.
5842 -- UTF8 UTF-8 encoding.
5844 -- See 'HELP GNAT COMPILE /WIDE_CHARACTER_ENCODING' for an explanation
5845 -- about the different character encoding methods.
5847 S_Pretty_Files : aliased constant S := "/FILES=@" &
5851 -- Take as arguments the files that are listed in the specified
5854 S_Pretty_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
5856 -- /NOFOLLOW_LINKS_FOR_FILES (D)
5857 -- /FOLLOW_LINKS_FOR_FILES
5859 -- Follow links when parsing project files
5861 S_Pretty_Forced : aliased constant S := "/FORCED_OUTPUT=@" &
5863 -- /FORCED_OUTPUT=file
5865 -- Write the output into the specified file, overriding any possibly
5868 S_Pretty_Formfeed : aliased constant S := "/FORM_FEED_AFTER_PRAGMA_PAGE " &
5870 -- /FORM_FEED_AFTER_PRAGMA_PAGE
5872 -- When there is a pragma Page in the source, insert a Form Feed
5873 -- character immediately after the semicolon that follows the pragma
5876 S_Pretty_Indent : aliased constant S := "/INDENTATION_LEVEL=#" &
5878 -- /INDENTATION_LEVEL=nnn
5880 -- Specify the number of spaces to add for each indentation level.
5881 -- nnn must be between 1 and 9. The default is 3.
5883 S_Pretty_Keyword : aliased constant S := "/KEYWORD_CASING=" &
5888 -- /KEYWORD_CASING[=keyword-option]
5890 -- Specify the case of Ada keywords. The default is keywords in lower
5893 -- keyword-option may be one of the following:
5898 S_Pretty_Maxlen : aliased constant S := "/LINE_LENGTH_MAX=#" &
5900 -- /LINE_LENGTH_MAX=nnn
5902 -- Set the maximum line length, nnn from 32 ..256. The default is 79.
5904 S_Pretty_Maxind : aliased constant S := "/MAX_INDENT=#" &
5908 -- Do not use an additional indentation level for case alternatives
5909 -- and variants if their number is nnn or more. The default is 10.
5910 -- If nnn is zero, an additional indentation level is used for any
5911 -- number of case alternatives and variants.
5913 S_Pretty_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
5920 -- /MESSAGES_PROJECT_FILE[=messages-option]
5922 -- Specifies the "verbosity" of the parsing of project files.
5923 -- messages-option may be one of the following:
5925 -- DEFAULT (D) No messages are output if there is no error or warning.
5927 -- MEDIUM A small number of messages are output.
5929 -- HIGH A great number of messages are output, most of them not
5930 -- being useful for the user.
5932 S_Pretty_Names : aliased constant S := "/NAME_CASING=" &
5941 -- /NAME_CASING[=name-option]
5943 -- Specify the casing of names.
5944 -- 'name-option' may be one of:
5946 -- AS_DECLARED (D) Name casing for defining occurrences are as they
5947 -- appear in the source file.
5949 -- LOWER_CASE Names are in lower case.
5951 -- UPPER_CASE Names are in upper case.
5953 -- MIXED_CASE Names are in mixed case.
5955 S_Pretty_Replace_No_Backup : aliased constant S := "/REPLACE_NO_BACKUP " &
5957 -- /REPLACE_NO_BACKUP
5959 -- Replace the argument source with the pretty-printed source without
5960 -- creating any backup copy of the argument source.
5962 S_Pretty_No_Labels : aliased constant S := "/NO_MISSED_LABELS " &
5964 -- /NO_MISSED_LABELS
5966 -- Do not insert missing end/exit labels. The end label is the name of
5967 -- a construct that may optionally appear at the end of the construct.
5968 -- This includes the names of packages and subprograms.
5969 -- Similarly, the exit label is the name of a loop that may appear as the
5970 -- argument of an exit statement within the loop. By default, GNAT PRETTY
5971 -- inserts these end/exit labels when they are absent in the original
5972 -- source. This qualifier /NO_MISSED_LABELS suppresses this insertion,
5973 -- so that the formatted source reflects the original.
5975 S_Pretty_Notabs : aliased constant S := "/NOTABS " &
5979 -- Replace all tabulations in comments with spaces.
5981 S_Pretty_Output : aliased constant S := "/OUTPUT=@" &
5985 -- Write the output to the specified file. If the file already exists,
5986 -- an error is reported.
5988 S_Pretty_Override : aliased constant S := "/OVERRIDING_REPLACE " &
5990 -- /NOOVERRIDING_REPLACE (D)
5991 -- /OVERRIDING_REPLACE
5993 -- Replace the argument source with the pretty-printed source and copy the
5994 -- argument source into filename.NPP, overriding any existing file if
5997 S_Pretty_Pragma : aliased constant S := "/PRAGMA_CASING=" &
6004 -- /PRAGMA_CASING[=pragma-option]
6006 -- Set the case of pragma identifiers. The default is Mixed case.
6007 -- pragma-option may be one of the following:
6013 S_Pretty_Project : aliased constant S := "/PROJECT_FILE=<" &
6015 -- /PROJECT_FILE=filename
6017 -- Specifies the main project file to be used. The project files rooted
6018 -- at the main project file will be parsed before any other processing to
6019 -- set the building environment.
6021 S_Pretty_Replace : aliased constant S := "/REPLACE " &
6026 -- Replace the argument source with the pretty-printed source and copy the
6027 -- argument source into filename.NPP. If filename.NPP already exists,
6028 -- report an error and exit.
6030 S_Pretty_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
6032 -- /RUNTIME_SYSTEM=xxx
6034 -- Compile against an alternate runtime system named xxx or RTS-xxx.
6036 S_Pretty_Search : aliased constant S := "/SEARCH=*" &
6038 -- /SEARCH=(directory[,...])
6040 -- When looking for source files also look in directories specified.
6042 S_Pretty_Specific : aliased constant S := "/SPECIFIC_CASING " &
6046 -- Do not use the default dictionary file; instead, use the casing
6047 -- defined by a qualifier /NAME_CASING and/or any explicit dictionary
6048 -- file specified by a qualifier /DICTIONARY.
6050 S_Pretty_Standard : aliased constant S := "/STANDARD_OUTPUT " &
6052 -- /NOSTANDARD_OUTPUT (D)
6055 -- Redirect the output to the standard output.
6057 S_Pretty_Subdirs : aliased constant S := "/SUBDIRS=<" &
6061 -- The actual directories (object, exec, library, ...) are subdirectories
6062 -- of the directory specified in the project file. If the subdirectory
6063 -- does not exist, it is created automatically.
6065 S_Pretty_Verbose : aliased constant S := "/VERBOSE " &
6070 -- Verbose mode; GNAT PRETTY generates version information and then a
6071 -- trace of the actions it takes to produce or obtain the ASIS tree.
6073 S_Pretty_Warnings : aliased constant S := "/WARNINGS " &
6078 -- Issue a warning to the standard error stream if it is not possible
6079 -- to provide the required layout in the result source.
6080 -- By default such warnings are not activated.
6082 Pretty_Switches : aliased constant Switches :=
6083 (S_Pretty_Add 'Access,
6084 S_Pretty_Align 'Access,
6085 S_Pretty_All_Prjs 'Access,
6086 S_Pretty_Attrib 'Access,
6087 S_Pretty_Comments 'Access,
6088 S_Pretty_Compact_Is 'Access,
6089 S_Pretty_Config 'Access,
6090 S_Pretty_Constr 'Access,
6091 S_Pretty_Comind 'Access,
6092 S_Pretty_Current 'Access,
6093 S_Pretty_Dico 'Access,
6094 S_Pretty_Eol 'Access,
6095 S_Pretty_Ext 'Access,
6096 S_Pretty_Encoding 'Access,
6097 S_Pretty_Files 'Access,
6098 S_Pretty_Follow 'Access,
6099 S_Pretty_Forced 'Access,
6100 S_Pretty_Formfeed 'Access,
6101 S_Pretty_Indent 'Access,
6102 S_Pretty_Keyword 'Access,
6103 S_Pretty_Maxlen 'Access,
6104 S_Pretty_Maxind 'Access,
6105 S_Pretty_Mess 'Access,
6106 S_Pretty_Names 'Access,
6107 S_Pretty_No_Labels 'Access,
6108 S_Pretty_Notabs 'Access,
6109 S_Pretty_Output 'Access,
6110 S_Pretty_Override 'Access,
6111 S_Pretty_Pragma 'Access,
6112 S_Pretty_Replace 'Access,
6113 S_Pretty_Replace_No_Backup'Access,
6114 S_Pretty_Project 'Access,
6115 S_Pretty_RTS 'Access,
6116 S_Pretty_Search 'Access,
6117 S_Pretty_Sep_Loop_Then 'Access,
6118 S_Pretty_N_Sep_Loop_Then 'Access,
6119 S_Pretty_Subdirs 'Access,
6120 S_Pretty_Use_On_New_Line 'Access,
6121 S_Pretty_Stnm_On_Nw_Line 'Access,
6122 S_Pretty_Specific 'Access,
6123 S_Pretty_Standard 'Access,
6124 S_Pretty_Verbose 'Access,
6125 S_Pretty_Warnings 'Access);
6127 ------------------------------
6128 -- Switches for GNAT SHARED --
6129 ------------------------------
6131 S_Shared_Debug : aliased constant S := "/DEBUG=" &
6140 -- /DEBUG[=debug-option]
6143 -- Specifies the amount of debugging information included. 'debug-option'
6144 -- is one of the following:
6146 -- ALL (D) Include full debugging information.
6148 -- NONE Provide no debugging information. Same as /NODEBUG.
6150 -- TRACEBACK Provide sufficient debug information for a traceback.
6152 -- NOTRACEBACK Same as NONE.
6154 S_Shared_Image : aliased constant S := "/IMAGE=@" &
6156 -- /IMAGE=image-name
6158 -- 'image-name' specifies the name for the generated shared library.
6160 S_Shared_Ident : aliased constant S := "/IDENTIFICATION=" & '"' &
6161 "--for-linker=IDENT=" &
6163 -- /IDENTIFICATION="<string>"
6165 -- "<string>" specifies the string to be stored in the image file ident-
6166 -- ification field in the image header. It overrides any pragma Ident
6167 -- specified string.
6169 S_Shared_Nofiles : aliased constant S := "/NOSTART_FILES " &
6173 -- Link in default image initialization and startup functions.
6175 S_Shared_Noinhib : aliased constant S := "/NOINHIBIT-IMAGE " &
6176 "--for-linker=--noinhibit-exec";
6179 -- Delete image if there are errors or warnings.
6181 S_Shared_Verb : aliased constant S := "/VERBOSE " &
6186 -- Causes additional information to be output, including a full list of
6187 -- the included object files. This switch option is most useful when you
6188 -- want to see what set of object files are being used in the link step.
6190 S_Shared_ZZZZZ : aliased constant S := "/<other> " &
6194 -- Any other switch transmitted to the underlying linker.
6196 Shared_Switches : aliased constant Switches :=
6197 (S_Shared_Debug 'Access,
6198 S_Shared_Image 'Access,
6199 S_Shared_Ident 'Access,
6200 S_Shared_Nofiles 'Access,
6201 S_Shared_Noinhib 'Access,
6202 S_Shared_Verb 'Access,
6203 S_Shared_ZZZZZ 'Access);
6205 -----------------------------
6206 -- Switches for GNAT STACK --
6207 -----------------------------
6209 S_Stack_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6211 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6213 -- Add directories to the project search path.
6215 S_Stack_All : aliased constant S := "/ALL_SUBPROGRAMS " &
6217 -- /NOALL_SUBPROGRAMS (D)
6220 -- Consider all subprograms as entry points.
6222 S_Stack_All_Cycles : aliased constant S := "/ALL_CYCLES " &
6224 -- /NOALL_CYCLES (D)
6227 -- Extract all possible cycles in the call graph.
6229 S_Stack_All_Prjs : aliased constant S := "/ALL_PROJECTS " &
6231 -- /NOALL_PROJECTS (D)
6234 -- When GNAT STACK is used with a Project File and no source is
6235 -- specified, the underlying tool gnatstack is called for all the
6236 -- units of all the Project Files in the project tree.
6238 S_Stack_Debug : aliased constant S := "/DEBUG " &
6243 -- Generate internal debug information.
6245 S_Stack_Directory : aliased constant S := "/DIRECTORY=*" &
6247 -- /DIRECTORY=(direc[,...])
6249 -- When looking for .ci files look also in directories specified.
6251 S_Stack_Entries : aliased constant S := "/ENTRIES=*" &
6254 -- /ENTRY=(entry_point[,...])
6256 -- Name of symbol to be used as entry point for the analysis.
6258 S_Stack_Files : aliased constant S := "/FILES=@" &
6262 -- Take as arguments the files that are listed in the specified
6265 S_Stack_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6267 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6268 -- /FOLLOW_LINKS_FOR_FILES
6270 -- Follow links when parsing project files
6272 S_Stack_Help : aliased constant S := "/HELP " &
6277 -- Output a message explaining the usage of gnatstack.
6279 S_Stack_List : aliased constant S := "/LIST=#" &
6283 -- Print the nnn subprograms requiring the biggest local stack usage. By
6284 -- default none will be displayed.
6286 S_Stack_Order : aliased constant S := "/ORDER=" &
6291 -- /ORDER[=order-option]
6293 -- Specifies the order for displaying the different call graphs.
6294 -- order-option may be one of the following:
6296 -- STACK (D) Select stack usage order
6298 -- ALPHABETICAL Select alphabetical order
6300 S_Stack_Path : aliased constant S := "/PATH " &
6305 -- Print all the subprograms that make up the worst-case path for every
6308 S_Stack_Project : aliased constant S := "/PROJECT_FILE=<" &
6310 -- /PROJECT_FILE=filename
6312 -- Specifies the main project file to be used. The project files rooted
6313 -- at the main project file will be parsed before the invocation of
6316 S_Stack_Output : aliased constant S := "/OUTPUT=@" &
6320 -- Name of the file containing the generated graph (VCG format).
6322 S_Stack_Regexp : aliased constant S := "/EXPRESSION=|" &
6325 -- /EXPRESSION=regular-expression
6327 -- Any symbol matching the regular expression will be considered as a
6328 -- potential entry point for the analysis.
6330 S_Stack_Subdirs : aliased constant S := "/SUBDIRS=<" &
6334 -- The actual directories (object, exec, library, ...) are subdirectories
6335 -- of the directory specified in the project file. If the subdirectory
6336 -- does not exist, it is created automatically.
6338 S_Stack_Unbounded : aliased constant S := "/UNBOUNDED=#" &
6342 -- Default stack size to be used for unbounded (dynamic) frames.
6344 S_Stack_Unknown : aliased constant S := "/UNKNOWN=#" &
6348 -- Default stack size to be used for unknown (external) calls.
6350 S_Stack_Verbose : aliased constant S := "/VERBOSE " &
6355 -- Specifies the amount of information to be displayed about the
6356 -- different subprograms. In verbose mode the full location of the
6357 -- subprogram will be part of the output, as well as detailed information
6358 -- about inaccurate data.
6360 S_Stack_Warnings : aliased constant S := "/WARNINGS=" &
6371 -- /WARNINGS[=(keyword[,...])]
6373 -- The following keywords are supported:
6375 -- ALL Turn on all optional warnings
6377 -- CYCLES Turn on warnings for cycles
6379 -- UNBOUNDED Turn on warnings for unbounded frames
6381 -- EXTERNAL Turn on warnings for external calls
6383 -- INDIRECT Turn on warnings for indirect calls
6385 Stack_Switches : aliased constant Switches :=
6386 (S_Stack_Add 'Access,
6387 S_Stack_All 'Access,
6388 S_Stack_All_Cycles 'Access,
6389 S_Stack_All_Prjs 'Access,
6390 S_Stack_Debug 'Access,
6391 S_Stack_Directory 'Access,
6392 S_Stack_Entries 'Access,
6393 S_Stack_Files 'Access,
6394 S_Stack_Follow 'Access,
6395 S_Stack_Help 'Access,
6396 S_Stack_List 'Access,
6397 S_Stack_Order 'Access,
6398 S_Stack_Path 'Access,
6399 S_Stack_Project 'Access,
6400 S_Stack_Output 'Access,
6401 S_Stack_Regexp 'Access,
6402 S_Stack_Subdirs 'Access,
6403 S_Stack_Unbounded 'Access,
6404 S_Stack_Unknown 'Access,
6405 S_Stack_Verbose 'Access,
6406 S_Stack_Warnings 'Access);
6408 ----------------------------
6409 -- Switches for GNAT STUB --
6410 ----------------------------
6412 S_Stub_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6414 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6416 -- Add directories to the project search path.
6418 S_Stub_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" &
6420 -- /CONFIGURATION_PRAGMAS_FILE=filespec
6422 -- Specifies a configuration pragmas file that must be taken into account
6425 S_Stub_Current : aliased constant S := "/CURRENT_DIRECTORY " &
6427 -- /CURRENT_DIRECTORY (D)
6428 -- /NOCURRENT_DIRECTORY
6430 -- Look for source, library or object files in the default directory.
6432 S_Stub_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
6434 -- /EXTERNAL_REFERENCE="name=val"
6436 -- Specifies an external reference to the project manager. Useful only if
6437 -- /PROJECT_FILE is used.
6440 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
6442 S_Stub_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6444 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6445 -- /FOLLOW_LINKS_FOR_FILES
6447 -- Follow links when parsing project files
6449 S_Stub_Full : aliased constant S := "/FULL " &
6454 -- If the destination directory already contains a file with the name of
6455 -- the body file for the argument file spec, replace it with the generated
6456 -- body stub. If /FULL is not used and there is already a body file, this
6457 -- existing body file is not replaced.
6459 S_Stub_Header : aliased constant S := "/HEADER=" &
6464 -- /HEADER[=header-option]
6466 -- Specifies the form of the comment header above the generated body stub.
6467 -- If no /HEADER qualifier is specified, there is no comment header.
6468 -- header-option is one of the following:
6471 -- GENERAL (D) Put a sample comment header into the body stub.
6473 -- SPEC Put the comment header (i.e., all the comments
6474 -- preceding the compilation unit) from the source of the
6475 -- library unit declaration into the body stub.
6477 S_Stub_Header_File : aliased constant S := "/FROM_HEADER_FILE=<" &
6480 -- /FROM_HEADER_FILE==filename
6482 -- Use the content of the file as the comment header for a generated body
6485 S_Stub_Indent : aliased constant S := "/INDENTATION=#" &
6489 -- (nnn is a non-negative integer). Set the indentation level in the
6490 -- generated body stub to nnn. nnn=0 means "no indentation".
6491 -- Default indentation is 3.
6493 S_Stub_Keep : aliased constant S := "/KEEP " &
6498 -- Do not delete the tree file (i.e., the snapshot of the compiler
6499 -- internal structures used by gnatstub) after creating the body stub.
6501 S_Stub_Length : aliased constant S := "/LINE_LENGTH=#" &
6505 -- (n is a non-negative integer). Set the maximum line length in the body
6506 -- stub to nnn. Default is 78.
6508 S_Stub_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
6515 -- /MESSAGES_PROJECT_FILE[=messages-option]
6517 -- Specifies the "verbosity" of the parsing of project files.
6518 -- messages-option may be one of the following:
6520 -- DEFAULT (D) No messages are output if there is no error or warning.
6522 -- MEDIUM A small number of messages are output.
6524 -- HIGH A great number of messages are output, most of them not
6525 -- being useful for the user.
6527 S_Stub_No_Exc : aliased constant S := "/NO_EXCEPTION " &
6529 -- /NONO_EXCEPTION (D)
6532 -- Avoid raising PROGRAM_ERROR in the generated program unit stubs.
6534 S_Stub_Output : aliased constant S := "/OUTPUT=@" &
6538 -- Body file name. This should be set if the argument file name does not
6539 -- follow the GNAT file naming conventions. If this switch is omitted,
6540 -- the default name for the body will be obtained from the argument file
6541 -- name according to the GNAT file naming conventions.
6543 S_Stub_Project : aliased constant S := "/PROJECT_FILE=<" &
6545 -- /PROJECT_FILE=filename
6547 -- Specifies the main project file to be used. The project files rooted
6548 -- at the main project file will be parsed before any other processing.
6549 -- The source and object directories to be searched will be communicated
6550 -- to gnatstub through logical names ADA_PRJ_INCLUDE_FILE and
6551 -- ADA_PRJ_OBJECTS_FILE.
6553 S_Stub_Quiet : aliased constant S := "/QUIET " &
6558 -- Quiet mode: do not generate a confirmation when a body is successfully
6559 -- created, and do not generate a message when a body is not required for
6560 -- an argument unit.
6562 S_Stub_Search : aliased constant S := "/SEARCH=*" &
6564 -- /SEARCH=(directory[,...])
6566 -- When looking for source files also look in directories specified.
6568 S_Stub_Subdirs : aliased constant S := "/SUBDIRS=<" &
6572 -- The actual directories (object, exec, library, ...) are subdirectories
6573 -- of the directory specified in the project file. If the subdirectory
6574 -- does not exist, it is created automatically.
6576 S_Stub_Tree : aliased constant S := "/TREE_FILE=" &
6583 -- /TREE_FILE[=treefile-option]
6585 -- Specify what to do with the tree file.
6586 -- treefile-option is one of the following:
6588 -- OVERWRITE (D) Overwrite the existing tree file. If the current
6589 -- directory already contains the file which, according
6590 -- to the GNAT file naming rules should be considered
6591 -- as a tree file for the argument source file,
6592 -- gnatstub will refuse to create the tree file needed
6593 -- to create a sample body unless this option is chosen.
6595 -- SAVE Do not remove the tree file (i.e., the snapshot
6596 -- of the compiler internal structures used by gnatstub)
6597 -- after creating the body stub.
6599 -- REUSE Reuse the tree file (if it exists) instead of
6601 -- Instead of creating the tree file for the library
6602 -- unit declaration, gnatstub tries to find it in the
6603 -- current directory and use it for creating a body.
6604 -- If the tree file is not found, no body is created.
6605 -- This option also implies `SAVE', whether or not the
6606 -- latter is set explicitly.
6608 S_Stub_Verbose : aliased constant S := "/VERBOSE " &
6613 -- Verbose mode: generate version information.
6615 Stub_Switches : aliased constant Switches :=
6616 (S_Stub_Add 'Access,
6617 S_Stub_Config 'Access,
6618 S_Stub_Current 'Access,
6620 S_Stub_Follow 'Access,
6621 S_Stub_Full 'Access,
6622 S_Stub_Header 'Access,
6623 S_Stub_Header_File'Access,
6624 S_Stub_Indent 'Access,
6625 S_Stub_Keep 'Access,
6626 S_Stub_Length 'Access,
6627 S_Stub_Mess 'Access,
6628 S_Stub_Output 'Access,
6629 S_Stub_Project 'Access,
6630 S_Stub_No_Exc 'Access,
6631 S_Stub_Quiet 'Access,
6632 S_Stub_Search 'Access,
6633 S_Stub_Subdirs 'Access,
6634 S_Stub_Tree 'Access,
6635 S_Stub_Verbose 'Access);
6637 ----------------------------
6638 -- Switches for GNAT SYNC --
6639 ----------------------------
6641 S_Sync_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6643 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6645 -- Add directories to the project search path.
6647 S_Sync_All : aliased constant S := "/ALL " &
6652 -- Also check the components of the GNAT run time and process the needed
6653 -- components of the GNAT RTL when building and analyzing the global
6654 -- structure for checking the global rules.
6656 S_Sync_Allproj : aliased constant S := "/ALL_PROJECTS " &
6658 -- /NOALL_PROJECTS (D)
6661 -- When GNAT SYNC is used with a Project File and no source is
6662 -- specified, the underlying tool gnatsync is called for all the
6663 -- sources of all the Project Files in the project tree.
6665 S_Sync_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
6667 -- /EXTERNAL_REFERENCE="name=val"
6669 -- Specifies an external reference to the project manager. Useful only if
6670 -- /PROJECT_FILE is used.
6673 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
6675 S_Sync_Files : aliased constant S := "/FILES=@" &
6679 -- Take as arguments the files that are listed in the specified
6682 S_Sync_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6684 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6685 -- /FOLLOW_LINKS_FOR_FILES
6687 -- Follow links when parsing project files
6689 S_Sync_Main : aliased constant S := "/MAIN_SUBPROGRAM=@" &
6691 -- /MAIN_SUBPROGRAM=filename
6693 -- Specify the name of the file containing the main subprogram
6695 S_Sync_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
6702 -- /MESSAGES_PROJECT_FILE[=messages-option]
6704 -- Specifies the "verbosity" of the parsing of project files.
6705 -- messages-option may be one of the following:
6707 -- DEFAULT (D) No messages are output if there is no error or warning.
6709 -- MEDIUM A small number of messages are output.
6711 -- HIGH A great number of messages are output, most of them not
6712 -- being useful for the user.
6714 S_Sync_Project : aliased constant S := "/PROJECT_FILE=<" &
6716 -- /PROJECT_FILE=filename
6718 -- Specifies the main project file to be used. The project files rooted
6719 -- at the main project file will be parsed before the invocation of the
6720 -- gnatcheck. The source directories to be searched will be communicated
6721 -- to gnatcheck through logical name ADA_PRJ_INCLUDE_FILE.
6723 S_Sync_Quiet : aliased constant S := "/QUIET " &
6728 -- Work quietly, only output warnings and errors.
6730 S_Sync_Subdirs : aliased constant S := "/SUBDIRS=<" &
6734 -- The actual directories (object, exec, library, ...) are subdirectories
6735 -- of the directory specified in the project file. If the subdirectory
6736 -- does not exist, it is created automatically.
6738 S_Sync_Verb : aliased constant S := "/VERBOSE " &
6743 -- The version number and copyright notice are output, as well as exact
6744 -- copies of the gnat1 commands spawned to obtain the chop control
6747 S_Sync_Exec : aliased constant S := "/EXECUTION_TIME " &
6749 -- /NOEXECUTION_TIME (D)
6752 -- Output the execution time
6754 S_Sync_Details : aliased constant S := "/DETAILS=" &
6761 -- /DETAILS[=options]
6763 -- Specifies the details of the output.
6764 -- Options may be one of the following:
6770 S_Sync_Warnoff : aliased constant S := "/WARNINGS_OFF " &
6775 -- Turn warnings off
6777 S_Sync_Output : aliased constant S := "/OUTPUT_FILE=<" &
6780 -- /OUTPUT_FILE=filename
6782 -- Redirect output to a text file
6784 Sync_Switches : aliased constant Switches :=
6785 (S_Sync_Add 'Access,
6787 S_Sync_Allproj 'Access,
6789 S_Sync_Follow 'Access,
6790 S_Sync_Files 'Access,
6791 S_Sync_Main 'Access,
6792 S_Sync_Mess 'Access,
6793 S_Sync_Project 'Access,
6794 S_Sync_Quiet 'Access,
6795 S_Sync_Subdirs 'Access,
6796 S_Sync_Verb 'Access,
6797 S_Sync_Exec 'Access,
6798 S_Sync_Details 'Access,
6799 S_Sync_Warnoff 'Access,
6800 S_Sync_Output 'Access);
6802 ----------------------------
6803 -- Switches for GNAT XREF --
6804 ----------------------------
6806 S_Xref_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6808 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6810 -- Add directories to the project search path.
6812 S_Xref_All : aliased constant S := "/ALL_FILES " &
6817 -- If this switch is present, FIND and XREF will parse the read-only
6818 -- files found in the library search path. Otherwise, these files will
6819 -- be ignored. This option can be used to protect Gnat sources or your
6820 -- own libraries from being parsed, thus making FIND and XREF much
6821 -- faster, and their output much smaller.
6823 S_Xref_Deriv : aliased constant S := "/DERIVED_TYPES " &
6825 -- /NODERIVED_TYPES (D)
6828 -- Output the parent type reference for each matching derived types.
6830 S_Xref_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
6832 -- /EXTERNAL_REFERENCE="name=val"
6834 -- Specifies an external reference to the project manager. Useful only if
6835 -- /PROJECT_FILE is used.
6838 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
6840 S_Xref_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6842 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6843 -- /FOLLOW_LINKS_FOR_FILES
6845 -- Follow links when parsing project files
6847 S_Xref_Full : aliased constant S := "/FULL_PATHNAME " &
6849 -- /NOFULL_PATHNAME (D)
6852 -- If this switch is set, the output file names will be preceded by their
6853 -- directory (if the file was found in the search path). If this switch
6854 -- is not set, the directory will not be printed.
6856 S_Xref_Global : aliased constant S := "/IGNORE_LOCALS " &
6858 -- /NOIGNORE_LOCALS (D)
6861 -- If this switch is set, information is output only for library-level
6862 -- entities, ignoring local entities. The use of this switch may
6863 -- accelerate FIND and XREF.
6865 S_Xref_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
6872 -- /MESSAGES_PROJECT_FILE[=messages-option]
6874 -- Specifies the "verbosity" of the parsing of project files.
6875 -- messages-option may be one of the following:
6877 -- DEFAULT (D) No messages are output if there is no error or warning.
6879 -- MEDIUM A small number of messages are output.
6881 -- HIGH A great number of messages are output, most of them not
6882 -- being useful for the user.
6884 S_Xref_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
6888 -- Do not look for sources in the system default directory.
6890 S_Xref_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
6894 -- Do not look for library files in the system default directory.
6896 S_Xref_Object : aliased constant S := "/OBJECT_SEARCH=*" &
6898 -- /OBJECT_SEARCH=(directory,...)
6900 -- When searching for library and object files, look in the specified
6901 -- directories. The order in which library files are searched is the same
6904 S_Xref_Project : aliased constant S := "/PROJECT=@" &
6908 -- Specify a project file to use. By default, FIND and XREF will try to
6909 -- locate a project file in the current directory.
6911 -- If a project file is either specified or found by the tools, then the
6912 -- content of the source directory and object directory lines are added
6913 -- as if they had been specified respectively by /SOURCE_SEARCH and
6916 S_Xref_Prj : aliased constant S := "/PROJECT_FILE=<" &
6918 -- /PROJECT_FILE=filename
6920 -- Specifies the main project file to be used. The project files rooted
6921 -- at the main project file will be parsed before doing any processing.
6922 -- The source and object directories to be searched will be communicated
6923 -- to gnatxref through logical names ADA_PRJ_INCLUDE_FILE and
6924 -- ADA_PRJ_OBJECTS_FILE.
6926 S_Xref_Search : aliased constant S := "/SEARCH=*" &
6928 -- /SEARCH=(directory,...)
6931 -- /OBJECT_SEARCH=(directory,...) /SOURCE_SEARCH=(directory,...)
6933 S_Xref_Source : aliased constant S := "/SOURCE_SEARCH=*" &
6935 -- /SOURCE_SEARCH=(directory,...)
6937 -- When looking for source files also look in the specified directories.
6938 -- The order in which source file search is undertaken is the same as for
6941 S_Xref_Subdirs : aliased constant S := "/SUBDIRS=<" &
6945 -- The actual directories (object, exec, library, ...) are subdirectories
6946 -- of the directory specified in the project file. If the subdirectory
6947 -- does not exist, it is created automatically.
6949 S_Xref_Output : aliased constant S := "/UNUSED " &
6951 -- /SOURCE_SEARCH=(directory,...)
6953 -- When looking for source files also look in the specified directories.
6954 -- The order in which source file search is undertaken is the same as for
6957 S_Xref_Tags : aliased constant S := "/TAGS " &
6962 -- Print a 'tags' file for vi.
6964 Xref_Switches : aliased constant Switches :=
6965 (S_Xref_Add 'Access,
6967 S_Xref_Deriv 'Access,
6969 S_Xref_Follow 'Access,
6970 S_Xref_Full 'Access,
6971 S_Xref_Global 'Access,
6972 S_Xref_Mess 'Access,
6973 S_Xref_Nostinc 'Access,
6974 S_Xref_Nostlib 'Access,
6975 S_Xref_Object 'Access,
6976 S_Xref_Project 'Access,
6978 S_Xref_Search 'Access,
6979 S_Xref_Source 'Access,
6980 S_Xref_Subdirs 'Access,
6981 S_Xref_Output 'Access,
6982 S_Xref_Tags 'Access);