1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2008, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 2, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING. If not, write --
19 -- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, --
20 -- Boston, MA 02110-1301, USA. --
22 -- As a special exception, if other files instantiate generics from this --
23 -- unit, or you link this unit with other files to produce an executable, --
24 -- this unit does not by itself cause the resulting executable to be --
25 -- covered by the GNU General Public License. This exception does not --
26 -- however invalidate any other reasons why the executable file might be --
27 -- covered by the GNU Public License. --
29 -- GNAT was originally developed by the GNAT team at New York University. --
30 -- Extensive contributions were provided by Ada Core Technologies Inc. --
32 ------------------------------------------------------------------------------
34 -- This package defines the structure of the abstract syntax tree. The Tree
35 -- package provides a basic tree structure. Sinfo describes how this structure
36 -- is used to represent the syntax of an Ada program.
38 -- The grammar in the RM is followed very closely in the tree
39 -- design, and is repeated as part of this source file.
41 -- The tree contains not only the full syntactic representation of the
42 -- program, but also the results of semantic analysis. In particular, the
43 -- nodes for defining identifiers, defining character literals and defining
44 -- operator symbols, collectively referred to as entities, represent what
45 -- would normally be regarded as the symbol table information. In addition a
46 -- number of the tree nodes contain semantic information.
48 -- WARNING: Several files are automatically generated from this package.
49 -- See below for details.
51 with Namet; use Namet;
52 with Types; use Types;
53 with Uintp; use Uintp;
54 with Urealp; use Urealp;
58 ---------------------------------
59 -- Making Changes to This File --
60 ---------------------------------
62 -- If changes are made to this file, a number of related steps must be
63 -- carried out to ensure consistency. First, if a field access function is
64 -- added, it appears in seven places:
66 -- The documentation associated with the node
67 -- The spec of the access function in sinfo.ads
68 -- The body of the access function in sinfo.adb
69 -- The pragma Inline at the end of sinfo.ads for the access function
70 -- The spec of the set procedure in sinfo.ads
71 -- The body of the set procedure in sinfo.adb
72 -- The pragma Inline at the end of sinfo.ads for the set procedure
74 -- The field chosen must be consistent in all places, and, for a node that
75 -- is a subexpression, must not overlap any of the standard expression
78 -- In addition, if any of the standard expression fields is changed, then
79 -- the utility program which creates the Treeprs spec (in file treeprs.ads)
80 -- must be updated appropriately, since it special cases expression fields.
82 -- If a new tree node is added, then the following changes are made
84 -- Add it to the documentation in the appropriate place
85 -- Add its fields to this documentation section
86 -- Define it in the appropriate classification in Node_Kind
87 -- In the body (sinfo), add entries to the access functions for all
88 -- its fields (except standard expression fields) to include the new
89 -- node in the checks.
90 -- Add an appropriate section to the case statement in sprint.adb
91 -- Add an appropriate section to the case statement in sem.adb
92 -- Add an appropriate section to the case statement in exp_util.adb
93 -- (Insert_Actions procedure)
94 -- For a subexpression, add an appropriate section to the case
95 -- statement in sem_eval.adb
96 -- For a subexpression, add an appropriate section to the case
97 -- statement in sem_res.adb
99 -- Finally, four utility programs must be run:
101 -- Run CSinfo to check that you have made the changes consistently. It
102 -- checks most of the rules given above, with clear error messages. This
103 -- utility reads sinfo.ads and sinfo.adb and generates a report to
106 -- Run XSinfo to create sinfo.h, the corresponding C header. This
107 -- utility reads sinfo.ads and generates sinfo.h. Note that it does
108 -- not need to read sinfo.adb, since the contents of the body are
109 -- algorithmically determinable from the spec.
111 -- Run XTreeprs to create treeprs.ads, an updated version of the module
112 -- that is used to drive the tree print routine. This utility reads (but
113 -- does not modify) treeprs.adt, the template that provides the basic
114 -- structure of the file, and then fills in the data from the comments
117 -- Run XNmake to create nmake.ads and nmake.adb, the package body and
118 -- spec of the Nmake package which contains functions for constructing
121 -- All of the above steps except CSinfo are done automatically by the
122 -- build scripts when you do a full bootstrap.
124 -- Note: sometime we could write a utility that actually generated the body
125 -- of sinfo from the spec instead of simply checking it, since, as noted
126 -- above, the contents of the body can be determined from the spec.
128 --------------------------------
129 -- Implicit Nodes in the Tree --
130 --------------------------------
132 -- Generally the structure of the tree very closely follows the grammar as
133 -- defined in the RM. However, certain nodes are omitted to save space and
134 -- simplify semantic processing. Two general classes of such omitted nodes
137 -- If the only possibilities for a non-terminal are one or more other
138 -- non-terminals (i.e. the rule is a "skinny" rule), then usually the
139 -- corresponding node is omitted from the tree, and the target construct
140 -- appears directly. For example, a real type definition is either
141 -- floating point definition or a fixed point definition. No explicit node
142 -- appears for real type definition. Instead either the floating point
143 -- definition or fixed point definition appears directly.
145 -- If a non-terminal corresponds to a list of some other non-terminal
146 -- (possibly with separating punctuation), then usually it is omitted from
147 -- the tree, and a list of components appears instead. For example,
148 -- sequence of statements does not appear explicitly in the tree. Instead
149 -- a list of statements appears directly.
151 -- Some additional cases of omitted nodes occur and are documented
152 -- individually. In particular, many nodes are omitted in the tree
153 -- generated for an expression.
155 -------------------------------------------
156 -- Handling of Defining Identifier Lists --
157 -------------------------------------------
159 -- In several declarative forms in the syntax, lists of defining
160 -- identifiers appear (object declarations, component declarations, number
161 -- declarations etc.)
163 -- The semantics of such statements are equivalent to a series of identical
164 -- declarations of single defining identifiers (except that conformance
165 -- checks require the same grouping of identifiers in the parameter case).
167 -- To simplify semantic processing, the parser breaks down such multiple
168 -- declaration cases into sequences of single declarations, duplicating
169 -- type and initialization information as required. The flags More_Ids and
170 -- Prev_Ids are used to record the original form of the source in the case
171 -- where the original source used a list of names, More_Ids being set on
172 -- all but the last name and Prev_Ids being set on all but the first name.
173 -- These flags are used to reconstruct the original source (e.g. in the
174 -- Sprint package), and also are included in the conformance checks, but
175 -- otherwise have no semantic significance.
177 -- Note: the reason that we use More_Ids and Prev_Ids rather than
178 -- First_Name and Last_Name flags is so that the flags are off in the
179 -- normal one identifier case, which minimizes tree print output.
181 -----------------------
182 -- Use of Node Lists --
183 -----------------------
185 -- With a few exceptions, if a construction of the form {non-terminal}
186 -- appears in the tree, lists are used in the corresponding tree node (see
187 -- package Nlists for handling of node lists). In this case a field of the
188 -- parent node points to a list of nodes for the non-terminal. The field
189 -- name for such fields has a plural name which always ends in "s". For
190 -- example, a case statement has a field Alternatives pointing to list of
191 -- case statement alternative nodes.
193 -- Only fields pointing to lists have names ending in "s", so generally the
194 -- structure is strongly typed, fields not ending in s point to single
195 -- nodes, and fields ending in s point to lists.
197 -- The following example shows how a traversal of a list is written. We
198 -- suppose here that Stmt points to a N_Case_Statement node which has a
199 -- list field called Alternatives:
201 -- Alt := First (Alternatives (Stmt));
202 -- while Present (Alt) loop
204 -- -- processing for case statement alternative Alt
206 -- Alt := Next (Alt);
209 -- The Present function tests for Empty, which in this case signals the end
210 -- of the list. First returns Empty immediately if the list is empty.
211 -- Present is defined in Atree, First and Next are defined in Nlists.
213 -- The exceptions to this rule occur with {DEFINING_IDENTIFIERS} in all
214 -- contexts, which is handled as described in the previous section, and
215 -- with {,library_unit_NAME} in the N_With_Clause mode, which is handled
216 -- using the First_Name and Last_Name flags, as further detailed in the
217 -- description of the N_With_Clause node.
223 -- Pragmas can appear in many different context, but are not included in
224 -- the grammar. Still they must appear in the tree, so they can be properly
227 -- Two approaches are used. In some cases, an extra field is defined in an
228 -- appropriate node that contains a list of pragmas appearing in the
229 -- expected context. For example pragmas can appear before an
230 -- Accept_Alternative in a Selective_Accept_Statement, and these pragmas
231 -- appear in the Pragmas_Before field of the N_Accept_Alternative node.
233 -- The other approach is to simply allow pragmas to appear in syntactic
234 -- lists where the grammar (of course) does not include the possibility.
235 -- For example, the Variants field of an N_Variant_Part node points to a
236 -- list that can contain both N_Pragma and N_Variant nodes.
238 -- To make processing easier in the latter case, the Nlists package
239 -- provides a set of routines (First_Non_Pragma, Last_Non_Pragma,
240 -- Next_Non_Pragma, Prev_Non_Pragma) that allow such lists to be handled
241 -- ignoring all pragmas.
243 -- In the case of the variants list, we can either write:
245 -- Variant := First (Variants (N));
246 -- while Present (Variant) loop
248 -- Variant := Next (Variant);
253 -- Variant := First_Non_Pragma (Variants (N));
254 -- while Present (Variant) loop
256 -- Variant := Next_Non_Pragma (Variant);
259 -- In the first form of the loop, Variant can either be an N_Pragma or an
260 -- N_Variant node. In the second form, Variant can only be N_Variant since
261 -- all pragmas are skipped.
263 ---------------------
264 -- Optional Fields --
265 ---------------------
267 -- Fields which correspond to a section of the syntax enclosed in square
268 -- brackets are generally omitted (and the corresponding field set to Empty
269 -- for a node, or No_List for a list). The documentation of such fields
270 -- notes these cases. One exception to this rule occurs in the case of
271 -- possibly empty statement sequences (such as the sequence of statements
272 -- in an entry call alternative). Such cases appear in the syntax rules as
273 -- [SEQUENCE_OF_STATEMENTS] and the fields corresponding to such optional
274 -- statement sequences always contain an empty list (not No_List) if no
275 -- statements are present.
277 -- Note: the utility program that constructs the body and spec of the Nmake
278 -- package relies on the format of the comments to determine if a field
279 -- should have a default value in the corresponding make routine. The rule
280 -- is that if the first line of the description of the field contains the
281 -- string "(set to xxx if", then a default value of xxx is provided for
282 -- this field in the corresponding Make_yyy routine.
284 -----------------------------------
285 -- Note on Body/Spec Terminology --
286 -----------------------------------
288 -- In informal discussions about Ada, it is customary to refer to package
289 -- and subprogram specs and bodies. However, this is not technically
290 -- correct, what is normally referred to as a spec or specification is in
291 -- fact a package declaration or subprogram declaration. We are careful in
292 -- GNAT to use the correct terminology and in particular, the full word
293 -- specification is never used as an incorrect substitute for declaration.
294 -- The structure and terminology used in the tree also reflects the grammar
295 -- and thus uses declaration and specification in the technically correct
298 -- However, there are contexts in which the informal terminology is useful.
299 -- We have the word "body" to refer to the Interp_Etype declared by the
300 -- declaration of a unit body, and in some contexts we need similar term to
301 -- refer to the entity declared by the package or subprogram declaration,
302 -- and simply using declaration can be confusing since the body also has a
305 -- An example of such a context is the link between the package body and
306 -- its declaration. With_Declaration is confusing, since the package body
307 -- itself is a declaration.
309 -- To deal with this problem, we reserve the informal term Spec, i.e. the
310 -- popular abbreviation used in this context, to refer to the entity
311 -- declared by the package or subprogram declaration. So in the above
312 -- example case, the field in the body is called With_Spec.
314 -- Another important context for the use of the word Spec is in error
315 -- messages, where a hyper-correct use of declaration would be confusing to
316 -- a typical Ada programmer, and even for an expert programmer can cause
317 -- confusion since the body has a declaration as well.
321 -- Declaration always refers to the syntactic entity that is called
322 -- a declaration. In particular, subprogram declaration
323 -- and package declaration are used to describe the
324 -- syntactic entity that includes the semicolon.
326 -- Specification always refers to the syntactic entity that is called
327 -- a specification. In particular, the terms procedure
328 -- specification, function specification, package
329 -- specification, subprogram specification always refer
330 -- to the syntactic entity that has no semicolon.
332 -- Spec is an informal term, used to refer to the entity
333 -- that is declared by a task declaration, protected
334 -- declaration, generic declaration, subprogram
335 -- declaration or package declaration.
337 -- This convention is followed throughout the GNAT documentation
338 -- both internal and external, and in all error message text.
340 ------------------------
341 -- Internal Use Nodes --
342 ------------------------
344 -- These are Node_Kind settings used in the internal implementation which
345 -- are not logically part of the specification.
348 -- Completely unused entry at the start of the enumeration type. This
349 -- is inserted so that no legitimate value is zero, which helps to get
350 -- better debugging behavior, since zero is a likely uninitialized value).
353 -- Completely unused entry at the end of the enumeration type. This is
354 -- handy so that arrays with Node_Kind as the index type have an extra
355 -- entry at the end (see for example the use of the Pchar_Pos_Array in
356 -- Treepr, where the extra entry provides the limit value when dealing with
357 -- the last used entry in the array).
359 -----------------------------------------
360 -- Note on the settings of Sloc fields --
361 -----------------------------------------
363 -- The Sloc field of nodes that come from the source is set by the parser.
364 -- For internal nodes, and nodes generated during expansion the Sloc is
365 -- usually set in the call to the constructor for the node. In general the
366 -- Sloc value chosen for an internal node is the Sloc of the source node
367 -- whose processing is responsible for the expansion. For example, the Sloc
368 -- of an inherited primitive operation is the Sloc of the corresponding
369 -- derived type declaration.
371 -- For the nodes of a generic instantiation, the Sloc value is encoded to
372 -- represent both the original Sloc in the generic unit, and the Sloc of
373 -- the instantiation itself. See Sinput.ads for details.
375 -- Subprogram instances create two callable entities: one is the visible
376 -- subprogram instance, and the other is an anonymous subprogram nested
377 -- within a wrapper package that contains the renamings for the actuals.
378 -- Both of these entities have the Sloc of the defining entity in the
379 -- instantiation node. This simplifies some ASIS queries.
381 -----------------------
382 -- Field Definitions --
383 -----------------------
385 -- In the following node definitions, all fields, both syntactic and
386 -- semantic, are documented. The one exception is in the case of entities
387 -- (defining identifiers, character literals and operator symbols), where
388 -- the usage of the fields depends on the entity kind. Entity fields are
389 -- fully documented in the separate package Einfo.
391 -- In the node definitions, three common sets of fields are abbreviated to
392 -- save both space in the documentation, and also space in the string
393 -- (defined in Tree_Print_Strings) used to print trees. The following
394 -- abbreviations are used:
396 -- Note: the utility program that creates the Treeprs spec (in the file
397 -- xtreeprs.adb) knows about the special fields here, so it must be
398 -- modified if any change is made to these fields.
400 -- "plus fields for binary operator"
401 -- Chars (Name1) Name_Id for the operator
402 -- Left_Opnd (Node2) left operand expression
403 -- Right_Opnd (Node3) right operand expression
404 -- Entity (Node4-Sem) defining entity for operator
405 -- Associated_Node (Node4-Sem) for generic processing
406 -- Do_Overflow_Check (Flag17-Sem) set if overflow check needed
407 -- Has_Private_View (Flag11-Sem) set in generic units.
409 -- "plus fields for unary operator"
410 -- Chars (Name1) Name_Id for the operator
411 -- Right_Opnd (Node3) right operand expression
412 -- Entity (Node4-Sem) defining entity for operator
413 -- Associated_Node (Node4-Sem) for generic processing
414 -- Do_Overflow_Check (Flag17-Sem) set if overflow check needed
415 -- Has_Private_View (Flag11-Sem) set in generic units.
417 -- "plus fields for expression"
418 -- Paren_Count number of parentheses levels
419 -- Etype (Node5-Sem) type of the expression
420 -- Is_Overloaded (Flag5-Sem) >1 type interpretation exists
421 -- Is_Static_Expression (Flag6-Sem) set for static expression
422 -- Raises_Constraint_Error (Flag7-Sem) evaluation raises CE
423 -- Must_Not_Freeze (Flag8-Sem) set if must not freeze
424 -- Do_Range_Check (Flag9-Sem) set if a range check needed
425 -- Assignment_OK (Flag15-Sem) set if modification is OK
426 -- Is_Controlling_Actual (Flag16-Sem) set for controlling argument
428 -- Note: see under (EXPRESSION) for further details on the use of
429 -- the Paren_Count field to record the number of parentheses levels.
431 -- Node_Kind is the type used in the Nkind field to indicate the node kind.
432 -- The actual definition of this type is given later (the reason for this
433 -- is that we want the descriptions ordered by logical chapter in the RM,
434 -- but the type definition is reordered to facilitate the definition of
435 -- some subtype ranges. The individual descriptions of the nodes show how
436 -- the various fields are used in each node kind, as well as providing
437 -- logical names for the fields. Functions and procedures are provided for
438 -- accessing and setting these fields using these logical names.
440 -----------------------
441 -- Gigi Restrictions --
442 -----------------------
444 -- The tree passed to Gigi is more restricted than the general tree form.
445 -- For example, as a result of expansion, most of the tasking nodes can
446 -- never appear. For each node to which either a complete or partial
447 -- restriction applies, a note entitled "Gigi restriction" appears which
448 -- documents the restriction.
450 -- Note that most of these restrictions apply only to trees generated when
451 -- code is being generated, since they involved expander actions that
454 ------------------------
455 -- Common Flag Fields --
456 ------------------------
458 -- The following flag fields appear in all nodes
461 -- This flag is used to indicate that a node (and all its children have
462 -- been analyzed. It is used to avoid reanalysis of a node that has
463 -- already been analyzed, both for efficiency and functional correctness
466 -- Comes_From_Source (Flag2)
467 -- This flag is on for any nodes built by the scanner or parser from the
468 -- source program, and off for any nodes built by the analyzer or
469 -- expander. It indicates that a node comes from the original source.
470 -- This flag is defined in Atree.
472 -- Error_Posted (Flag3)
473 -- This flag is used to avoid multiple error messages being posted on or
474 -- referring to the same node. This flag is set if an error message
475 -- refers to a node or is posted on its source location, and has the
476 -- effect of inhibiting further messages involving this same node.
478 -- Has_Dynamic_Length_Check (Flag10-Sem)
479 -- This flag is present on all nodes. It is set to indicate that one of
480 -- the routines in unit Checks has generated a length check action which
481 -- has been inserted at the flagged node. This is used to avoid the
482 -- generation of duplicate checks.
484 -- Has_Dynamic_Range_Check (Flag12-Sem)
485 -- This flag is present on all nodes. It is set to indicate that one of
486 -- the routines in unit Checks has generated a range check action which
487 -- has been inserted at the flagged node. This is used to avoid the
488 -- generation of duplicate checks.
490 -- Has_Local_Raise (Flag8-Sem)
491 -- Present in exception handler nodes. Set if the handler can be entered
492 -- via a local raise that gets transformed to a goto statement. This will
493 -- always be set if Local_Raise_Statements is non-empty, but can also be
494 -- set as a result of generation of N_Raise_xxx nodes, or flags set in
495 -- nodes requiring generation of back end checks.
497 ------------------------------------
498 -- Description of Semantic Fields --
499 ------------------------------------
501 -- The meaning of the syntactic fields is generally clear from their names
502 -- without any further description, since the names are chosen to
503 -- correspond very closely to the syntax in the reference manual. This
504 -- section describes the usage of the semantic fields, which are used to
505 -- contain additional information determined during semantic analysis.
507 -- ABE_Is_Certain (Flag18-Sem)
508 -- This flag is set in an instantiation node or a call node is determined
509 -- to be sure to raise an ABE. This is used to trigger special handling
510 -- of such cases, particularly in the instantiation case where we avoid
511 -- instantiating the body if this flag is set. This flag is also present
512 -- in an N_Formal_Package_Declaration_Node since formal package
513 -- declarations are treated like instantiations, but it is always set to
514 -- False in this context.
516 -- Accept_Handler_Records (List5-Sem)
517 -- This field is present only in an N_Accept_Alternative node. It is used
518 -- to temporarily hold the exception handler records from an accept
519 -- statement in a selective accept. These exception handlers will
520 -- eventually be placed in the Handler_Records list of the procedure
521 -- built for this accept (see Expand_N_Selective_Accept procedure in
522 -- Exp_Ch9 for further details).
524 -- Access_Types_To_Process (Elist2-Sem)
525 -- Present in N_Freeze_Entity nodes for Incomplete or private types.
526 -- Contains the list of access types which may require specific treatment
527 -- when the nature of the type completion is completely known. An example
528 -- of such treatment is the generation of the associated_final_chain.
530 -- Actions (List1-Sem)
531 -- This field contains a sequence of actions that are associated with the
532 -- node holding the field. See the individual node types for details of
533 -- how this field is used, as well as the description of the specific use
534 -- for a particular node type.
536 -- Activation_Chain_Entity (Node3-Sem)
537 -- This is used in tree nodes representing task activators (blocks,
538 -- subprogram bodies, package declarations, and task bodies). It is
539 -- initially Empty, and then gets set to point to the entity for the
540 -- declared Activation_Chain variable when the first task is declared.
541 -- When tasks are declared in the corresponding declarative region this
542 -- entity is located by name (its name is always _Chain) and the declared
543 -- tasks are added to the chain. Note that N_Extended_Return_Statement
544 -- does not have this attribute, although it does have an activation
545 -- chain. This chain is used to store the tasks temporarily, and is not
546 -- used for activating them. On successful completion of the return
547 -- statement, the tasks are moved to the caller's chain, and the caller
550 -- Acts_As_Spec (Flag4-Sem)
551 -- A flag set in the N_Subprogram_Body node for a subprogram body which
552 -- is acting as its own spec, except in the case of a library level
553 -- subprogram, in which case the flag is set on the parent compilation
554 -- unit node instead (see further description in spec of Lib package).
555 -- ??? Above note about Lib is dubious since lib.ads does not mention
556 -- Acts_As_Spec at all.
558 -- Actual_Designated_Subtype (Node4-Sem)
559 -- Present in N_Free_Statement and N_Explicit_Dereference nodes. If gigi
560 -- needs to known the dynamic constrained subtype of the designated
561 -- object, this attribute is set to that type. This is done for
562 -- N_Free_Statements for access-to-classwide types and access to
563 -- unconstrained packed array types, and for N_Explicit_Dereference when
564 -- the designated type is an unconstrained packed array and the
565 -- dereference is the prefix of a 'Size attribute reference.
567 -- Address_Warning_Posted (Flag18-Sem)
568 -- Present in N_Attribute_Definition nodes. Set to indicate that we have
569 -- posted a warning for the address clause regarding size or alignment
570 -- issues. Used to inhibit multiple redundant messages.
572 -- Aggregate_Bounds (Node3-Sem)
573 -- Present in array N_Aggregate nodes. If the aggregate contains
574 -- component associations this field points to an N_Range node whose
575 -- bounds give the lowest and highest discrete choice values. If the
576 -- named aggregate contains a dynamic or null choice this field is empty.
577 -- If the aggregate contains positional elements this field points to an
578 -- N_Integer_Literal node giving the number of positional elements. Note
579 -- that if the aggregate contains positional elements and an other choice
580 -- the N_Integer_Literal only accounts for the number of positional
583 -- All_Others (Flag11-Sem)
584 -- Present in an N_Others_Choice node. This flag is set for an others
585 -- exception where all exceptions are to be caught, even those that are
586 -- not normally handled (in particular the tasking abort signal). This
587 -- is used for translation of the at end handler into a normal exception
590 -- Assignment_OK (Flag15-Sem)
591 -- This flag is set in a subexpression node for an object, indicating
592 -- that the associated object can be modified, even if this would not
593 -- normally be permissible (either by direct assignment, or by being
594 -- passed as an out or in-out parameter). This is used by the expander
595 -- for a number of purposes, including initialization of constants and
596 -- limited type objects (such as tasks), setting discriminant fields,
597 -- setting tag values, etc. N_Object_Declaration nodes also have this
598 -- flag defined. Here it is used to indicate that an initialization
599 -- expression is valid, even where it would normally not be allowed
600 -- (e.g. where the type involved is limited).
602 -- Associated_Node (Node4-Sem)
603 -- Present in nodes that can denote an entity: identifiers, character
604 -- literals, operator symbols, expanded names, operator nodes, and
605 -- attribute reference nodes (all these nodes have an Entity field).
606 -- This field is also present in N_Aggregate, N_Selected_Component, and
607 -- N_Extension_Aggregate nodes. This field is used in generic processing
608 -- to create links between the generic template and the generic copy.
609 -- See Sem_Ch12.Get_Associated_Node for full details. Note that this
610 -- field overlaps Entity, which is fine, since, as explained in Sem_Ch12,
611 -- the normal function of Entity is not required at the point where the
612 -- Associated_Node is set. Note also, that in generic templates, this
613 -- means that the Entity field does not necessarily point to an Entity.
614 -- Since the back end is expected to ignore generic templates, this is
617 -- At_End_Proc (Node1)
618 -- This field is present in an N_Handled_Sequence_Of_Statements node.
619 -- It contains an identifier reference for the cleanup procedure to be
620 -- called. See description of this node for further details.
622 -- Backwards_OK (Flag6-Sem)
623 -- A flag present in the N_Assignment_Statement node. It is used only
624 -- if the type being assigned is an array type, and is set if analysis
625 -- determines that it is definitely safe to do the copy backwards, i.e.
626 -- starting at the highest addressed element. Note that if neither of the
627 -- flags Forwards_OK or Backwards_OK is set, it means that the front end
628 -- could not determine that either direction is definitely safe, and a
629 -- runtime check may be required if the backend cannot figure it out.
631 -- Body_To_Inline (Node3-Sem)
632 -- present in subprogram declarations. Denotes analyzed but unexpanded
633 -- body of subprogram, to be used when inlining calls. Present when the
634 -- subprogram has an Inline pragma and inlining is enabled. If the
635 -- declaration is completed by a renaming_as_body, and the renamed en-
636 -- tity is a subprogram, the Body_To_Inline is the name of that entity,
637 -- which is used directly in later calls to the original subprogram.
639 -- Body_Required (Flag13-Sem)
640 -- A flag that appears in the N_Compilation_Unit node indicating that
641 -- the corresponding unit requires a body. For the package case, this
642 -- indicates that a completion is required. In Ada 95, if the flag is not
643 -- set for the package case, then a body may not be present. In Ada 83,
644 -- if the flag is not set for the package case, then body is optional.
645 -- For a subprogram declaration, the flag is set except in the case where
646 -- a pragma Import or Interface applies, in which case no body is
647 -- permitted (in Ada 83 or Ada 95).
649 -- By_Ref (Flag5-Sem)
650 -- Present in N_Simple_Return_Statement and N_Extended_Return_Statement,
651 -- this flag is set when the returned expression is already allocated on
652 -- the secondary stack and thus the result is passed by reference rather
653 -- than copied another time.
655 -- Check_Address_Alignment (Flag11-Sem)
656 -- A flag present in N_Attribute_Definition clause for a 'Address
657 -- attribute definition. This flag is set if a dynamic check should be
658 -- generated at the freeze point for the entity to which this address
659 -- clause applies. The reason that we need this flag is that we want to
660 -- check for range checks being suppressed at the point where the
661 -- attribute definition clause is given, rather than testing this at the
664 -- Coextensions (Elist4-Sem)
665 -- Present in allocators nodes. Points to list of allocators for the
666 -- access discriminants of the allocated object.
668 -- Comes_From_Extended_Return_Statement (Flag18-Sem)
669 -- Present in N_Simple_Return_Statement nodes. True if this node was
670 -- constructed as part of the N_Extended_Return_Statement expansion.
673 -- Compile_Time_Known_Aggregate (Flag18-Sem)
674 -- Present in N_Aggregate nodes. Set for aggregates which can be fully
675 -- evaluated at compile time without raising constraint error. Such
676 -- aggregates can be passed as is to Gigi without any expansion. See
677 -- Sem_Aggr for the specific conditions under which an aggregate has this
678 -- flag set. See also the flag Static_Processing_OK.
680 -- Condition_Actions (List3-Sem)
681 -- This field appears in else-if nodes and in the iteration scheme node
682 -- for while loops. This field is only used during semantic processing to
683 -- temporarily hold actions inserted into the tree. In the tree passed
684 -- to gigi, the condition actions field is always set to No_List. For
685 -- details on how this field is used, see the routine Insert_Actions in
686 -- package Exp_Util, and also the expansion routines for the relevant
689 -- Controlling_Argument (Node1-Sem)
690 -- This field is set in procedure and function call nodes if the call
691 -- is a dispatching call (it is Empty for a non-dispatching call). It
692 -- indicates the source of the call's controlling tag. For procedure
693 -- calls, the Controlling_Argument is one of the actuals. For function
694 -- that has a dispatching result, it is an entity in the context of the
695 -- call that can provide a tag, or else it is the tag of the root type
696 -- of the class. It can also specify a tag directly rather than being a
697 -- tagged object. The latter is needed by the implementations of AI-239
700 -- Conversion_OK (Flag14-Sem)
701 -- A flag set on type conversion nodes to indicate that the conversion
702 -- is to be considered as being valid, even though it is the case that
703 -- the conversion is not valid Ada. This is used for attributes Enum_Rep,
704 -- Fixed_Value and Integer_Value, for internal conversions done for
705 -- fixed-point operations, and for certain conversions for calls to
706 -- initialization procedures. If Conversion_OK is set, then Etype must be
707 -- set (the analyzer assumes that Etype has been set). For the case of
708 -- fixed-point operands, it also indicates that the conversion is to be
709 -- direct conversion of the underlying integer result, with no regard to
710 -- the small operand.
712 -- Corresponding_Body (Node5-Sem)
713 -- This field is set in subprogram declarations, package declarations,
714 -- entry declarations of protected types, and in generic units. It
715 -- points to the defining entity for the corresponding body (NOT the
716 -- node for the body itself).
718 -- Corresponding_Formal_Spec (Node3-Sem)
719 -- This field is set in subprogram renaming declarations, where it points
720 -- to the defining entity for a formal subprogram in the case where the
721 -- renaming corresponds to a generic formal subprogram association in an
722 -- instantiation. The field is Empty if the renaming does not correspond
723 -- to such a formal association.
725 -- Corresponding_Generic_Association (Node5-Sem)
726 -- This field is defined for object declarations and object renaming
727 -- declarations. It is set for the declarations within an instance that
728 -- map generic formals to their actuals. If set, the field points to
729 -- a generic_association which is the original parent of the expression
730 -- or name appearing in the declaration. This simplifies ASIS queries.
732 -- Corresponding_Integer_Value (Uint4-Sem)
733 -- This field is set in real literals of fixed-point types (it is not
734 -- used for floating-point types). It contains the integer value used
735 -- to represent the fixed-point value. It is also set on the universal
736 -- real literals used to represent bounds of fixed-point base types
737 -- and their first named subtypes.
739 -- Corresponding_Spec (Node5-Sem)
740 -- This field is set in subprogram, package, task, and protected body
741 -- nodes, where it points to the defining entity in the corresponding
742 -- spec. The attribute is also set in N_With_Clause nodes where it points
743 -- to the defining entity for the with'ed spec, and in a subprogram
744 -- renaming declaration when it is a Renaming_As_Body. The field is Empty
745 -- if there is no corresponding spec, as in the case of a subprogram body
746 -- that serves as its own spec.
748 -- Corresponding_Stub (Node3-Sem)
749 -- This field is present in an N_Subunit node. It holds the node in
750 -- the parent unit that is the stub declaration for the subunit. It is
751 -- set when analysis of the stub forces loading of the proper body. If
752 -- expansion of the proper body creates new declarative nodes, they are
753 -- inserted at the point of the corresponding_stub.
755 -- Dcheck_Function (Node5-Sem)
756 -- This field is present in an N_Variant node, It references the entity
757 -- for the discriminant checking function for the variant.
759 -- Debug_Statement (Node3)
760 -- This field is present in an N_Pragma node. It is used only for a Debug
761 -- pragma. The parameter is of the form of an expression, as required by
762 -- the pragma syntax, but is actually a procedure call. To simplify
763 -- semantic processing, the parser creates a copy of the argument
764 -- rearranged into a procedure call statement and places it in the
765 -- Debug_Statement field. Note that this field is considered syntactic
766 -- field, since it is created by the parser.
768 -- Default_Expression (Node5-Sem)
769 -- This field is Empty if there is no default expression. If there is a
770 -- simple default expression (one with no side effects), then this field
771 -- simply contains a copy of the Expression field (both point to the tree
772 -- for the default expression). Default_Expression is used for
773 -- conformance checking.
775 -- Discr_Check_Funcs_Built (Flag11-Sem)
776 -- This flag is present in N_Full_Type_Declaration nodes. It is set when
777 -- discriminant checking functions are constructed. The purpose is to
778 -- avoid attempting to set these functions more than once.
780 -- Do_Accessibility_Check (Flag13-Sem)
781 -- This flag is set on N_Parameter_Specification nodes to indicate
782 -- that an accessibility check is required for the parameter. It is
783 -- not yet decided who takes care of this check (TBD ???).
785 -- Do_Discriminant_Check (Flag13-Sem)
786 -- This flag is set on N_Selected_Component nodes to indicate that a
787 -- discriminant check is required using the discriminant check routine
788 -- associated with the selector. The actual check is generated by the
789 -- expander when processing selected components.
791 -- Do_Division_Check (Flag13-Sem)
792 -- This flag is set on a division operator (/ mod rem) to indicate
793 -- that a zero divide check is required. The actual check is dealt
794 -- with by the backend (all the front end does is to set the flag).
796 -- Do_Length_Check (Flag4-Sem)
797 -- This flag is set in an N_Assignment_Statement, N_Op_And, N_Op_Or,
798 -- N_Op_Xor, or N_Type_Conversion node to indicate that a length check
799 -- is required. It is not determined who deals with this flag (???).
801 -- Do_Overflow_Check (Flag17-Sem)
802 -- This flag is set on an operator where an overflow check is required on
803 -- the operation. The actual check is dealt with by the backend (all the
804 -- front end does is to set the flag). The other cases where this flag is
805 -- used is on a Type_Conversion node and for attribute reference nodes.
806 -- For a type conversion, it means that the conversion is from one base
807 -- type to another, and the value may not fit in the target base type.
808 -- See also the description of Do_Range_Check for this case. The only
809 -- attribute references which use this flag are Pred and Succ, where it
810 -- means that the result should be checked for going outside the base
813 -- Do_Range_Check (Flag9-Sem)
814 -- This flag is set on an expression which appears in a context where a
815 -- range check is required. The target type is clear from the context.
816 -- The contexts in which this flag can appear are the following:
818 -- Right side of an assignment. In this case the target type is
819 -- taken from the left side of the assignment, which is referenced
820 -- by the Name of the N_Assignment_Statement node.
822 -- Subscript expressions in an indexed component. In this case the
823 -- target type is determined from the type of the array, which is
824 -- referenced by the Prefix of the N_Indexed_Component node.
826 -- Argument expression for a parameter, appearing either directly in
827 -- the Parameter_Associations list of a call or as the Expression of an
828 -- N_Parameter_Association node that appears in this list. In either
829 -- case, the check is against the type of the formal. Note that the
830 -- flag is relevant only in IN and IN OUT parameters, and will be
831 -- ignored for OUT parameters, where no check is required in the call,
832 -- and if a check is required on the return, it is generated explicitly
833 -- with a type conversion.
835 -- Initialization expression for the initial value in an object
836 -- declaration. In this case the Do_Range_Check flag is set on
837 -- the initialization expression, and the check is against the
838 -- range of the type of the object being declared.
840 -- The expression of a type conversion. In this case the range check is
841 -- against the target type of the conversion. See also the use of
842 -- Do_Overflow_Check on a type conversion. The distinction is that the
843 -- overflow check protects against a value that is outside the range of
844 -- the target base type, whereas a range check checks that the
845 -- resulting value (which is a value of the base type of the target
846 -- type), satisfies the range constraint of the target type.
848 -- Note: when a range check is required in contexts other than those
849 -- listed above (e.g. in a return statement), an additional type
850 -- conversion node is introduced to represent the required check.
852 -- Do_Storage_Check (Flag17-Sem)
853 -- This flag is set in an N_Allocator node to indicate that a storage
854 -- check is required for the allocation, or in an N_Subprogram_Body node
855 -- to indicate that a stack check is required in the subprogram prolog.
856 -- The N_Allocator case is handled by the routine that expands the call
857 -- to the runtime routine. The N_Subprogram_Body case is handled by the
858 -- backend, and all the semantics does is set the flag.
860 -- Do_Tag_Check (Flag13-Sem)
861 -- This flag is set on an N_Assignment_Statement, N_Function_Call,
862 -- N_Procedure_Call_Statement, N_Type_Conversion,
863 -- N_Simple_Return_Statement, or N_Extended_Return_Statement
864 -- node to indicate that the tag check can be suppressed. It is not
865 -- yet decided how this flag is used (TBD ???).
867 -- Elaborate_Present (Flag4-Sem)
868 -- This flag is set in the N_With_Clause node to indicate that pragma
869 -- Elaborate pragma appears for the with'ed units.
871 -- Elaborate_All_Desirable (Flag9-Sem)
872 -- This flag is set in the N_With_Clause mode to indicate that the static
873 -- elaboration processing has determined that an Elaborate_All pragma is
874 -- desirable for correct elaboration for this unit.
876 -- Elaborate_All_Present (Flag14-Sem)
877 -- This flag is set in the N_With_Clause node to indicate that a
878 -- pragma Elaborate_All pragma appears for the with'ed units.
880 -- Elaborate_Desirable (Flag11-Sem)
881 -- This flag is set in the N_With_Clause mode to indicate that the static
882 -- elaboration processing has determined that an Elaborate pragma is
883 -- desirable for correct elaboration for this unit.
885 -- Elaboration_Boolean (Node2-Sem)
886 -- This field is present in function and procedure specification nodes.
887 -- If set, it points to the entity for a Boolean flag that must be tested
888 -- for certain calls to check for access before elaboration. See body of
889 -- Sem_Elab for further details. This field is Empty if no elaboration
890 -- boolean is required.
892 -- Else_Actions (List3-Sem)
893 -- This field is present in conditional expression nodes. During code
894 -- expansion we use the Insert_Actions procedure (in Exp_Util) to insert
895 -- actions at an appropriate place in the tree to get elaborated at the
896 -- right time. For conditional expressions, we have to be sure that the
897 -- actions for the Else branch are only elaborated if the condition is
898 -- False. The Else_Actions field is used as a temporary parking place for
899 -- these actions. The final tree is always rewritten to eliminate the
900 -- need for this field, so in the tree passed to Gigi, this field is
901 -- always set to No_List.
903 -- Enclosing_Variant (Node2-Sem)
904 -- This field is present in the N_Variant node and identifies the Node_Id
905 -- corresponding to the immediately enclosing variant when the variant is
906 -- nested, and N_Empty otherwise. Set during semantic processing of the
907 -- variant part of a record type.
909 -- Entity (Node4-Sem)
910 -- Appears in all direct names (identifiers, character literals, and
911 -- operator symbols), as well as expanded names, and attributes that
912 -- denote entities, such as 'Class. Points to entity for corresponding
913 -- defining occurrence. Set after name resolution. For identifiers in a
914 -- WITH list, the corresponding defining occurrence is in a separately
915 -- compiled file, and Entity must be set by the library Load procedure.
917 -- Note: During name resolution, the value in Entity may be temporarily
918 -- incorrect (e.g. during overload resolution, Entity is initially set to
919 -- the first possible correct interpretation, and then later modified if
920 -- necessary to contain the correct value after resolution).
922 -- Note: This field overlaps Associated_Node, which is used during
923 -- generic processing (see Sem_Ch12 for details). Note also that in
924 -- generic templates, this means that the Entity field does not always
925 -- point to an Entity. Since the back end is expected to ignore generic
926 -- templates, this is harmless.
928 -- Note: This field also appears in N_Attribute_Definition_Clause nodes.
929 -- It is used only for stream attributes definition clauses. In this
930 -- case, it denotes a (possibly dummy) subprogram entity that is declared
931 -- conceptually at the point of the clause. Thus the visibility of the
932 -- attribute definition clause (in the sense of 8.3(23) as amended by
933 -- AI-195) can be checked by testing the visibility of that subprogram.
935 -- Note: Normally the Entity field of an identifier points to the entity
936 -- for the corresponding defining identifier, and hence the Chars field
937 -- of an identifier will match the Chars field of the entity. However,
938 -- there is no requirement that these match, and there are obscure cases
939 -- of generated code where they do not match.
941 -- Entity_Or_Associated_Node (Node4-Sem)
942 -- A synonym for both Entity and Associated_Node. Used by convention in
943 -- the code when referencing this field in cases where it is not known
944 -- whether the field contains an Entity or an Associated_Node.
947 -- Appears in all expression nodes, all direct names, and all entities.
948 -- Points to the entity for the related type. Set after type resolution.
949 -- Normally this is the actual subtype of the expression. However, in
950 -- certain contexts such as the right side of an assignment, subscripts,
951 -- arguments to calls, returned value in a function, initial value etc.
952 -- it is the desired target type. In the event that this is different
953 -- from the actual type, the Do_Range_Check flag will be set if a range
954 -- check is required. Note: if the Is_Overloaded flag is set, then Etype
955 -- points to an essentially arbitrary choice from the possible set of
958 -- Exception_Junk (Flag8-Sem)
959 -- This flag is set in a various nodes appearing in a statement sequence
960 -- to indicate that the corresponding node is an artifact of the
961 -- generated code for exception handling, and should be ignored when
962 -- analyzing the control flow of the relevant sequence of statements
963 -- (e.g. to check that it does not end with a bad return statement).
965 -- Exception_Label (Node5-Sem)
966 -- Appears in N_Push_xxx_Label nodes. Points to the entity of the label
967 -- to be used for transforming the corresponding exception into a goto,
968 -- or contains Empty, if this exception is not to be transformed. Also
969 -- appears in N_Exception_Handler nodes, where, if set, it indicates
970 -- that there may be a local raise for the handler, so that expansion
971 -- to allow a goto is required (and this field contains the label for
972 -- this goto). See Exp_Ch11.Expand_Local_Exception_Handlers for details.
974 -- Expansion_Delayed (Flag11-Sem)
975 -- Set on aggregates and extension aggregates that need a top-down rather
976 -- than bottom up expansion. Typically aggregate expansion happens bottom
977 -- up. For nested aggregates the expansion is delayed until the enclosing
978 -- aggregate itself is expanded, e.g. in the context of a declaration. To
979 -- delay it we set this flag. This is done to avoid creating a temporary
980 -- for each level of a nested aggregates, and also to prevent the
981 -- premature generation of constraint checks. This is also a requirement
982 -- if we want to generate the proper attachment to the internal
983 -- finalization lists (for record with controlled components). Top down
984 -- expansion of aggregates is also used for in-place array aggregate
985 -- assignment or initialization. When the full context is known, the
986 -- target of the assignment or initialization is used to generate the
987 -- left-hand side of individual assignment to each sub-component.
989 -- First_Inlined_Subprogram (Node3-Sem)
990 -- Present in the N_Compilation_Unit node for the main program. Points
991 -- to a chain of entities for subprograms that are to be inlined. The
992 -- Next_Inlined_Subprogram field of these entities is used as a link
993 -- pointer with Empty marking the end of the list. This field is Empty
994 -- if there are no inlined subprograms or inlining is not active.
996 -- First_Named_Actual (Node4-Sem)
997 -- Present in procedure call statement and function call nodes, and also
998 -- in Intrinsic nodes. Set during semantic analysis to point to the first
999 -- named parameter where parameters are ordered by declaration order (as
1000 -- opposed to the actual order in the call which may be different due to
1001 -- named associations). Note: this field points to the explicit actual
1002 -- parameter itself, not the N_Parameter_Association node (its parent).
1004 -- First_Real_Statement (Node2-Sem)
1005 -- Present in N_Handled_Sequence_Of_Statements node. Normally set to
1006 -- Empty. Used only when declarations are moved into the statement part
1007 -- of a construct as a result of wrapping an AT END handler that is
1008 -- required to cover the declarations. In this case, this field is used
1009 -- to remember the location in the statements list of the first real
1010 -- statement, i.e. the statement that used to be first in the statement
1011 -- list before the declarations were prepended.
1013 -- First_Subtype_Link (Node5-Sem)
1014 -- Present in N_Freeze_Entity node for an anonymous base type that is
1015 -- implicitly created by the declaration of a first subtype. It points
1016 -- to the entity for the first subtype.
1018 -- Float_Truncate (Flag11-Sem)
1019 -- A flag present in type conversion nodes. This is used for float to
1020 -- integer conversions where truncation is required rather than rounding.
1021 -- Note that Gigi does not handle type conversions from real to integer
1022 -- with rounding (see Expand_N_Type_Conversion).
1024 -- Forwards_OK (Flag5-Sem)
1025 -- A flag present in the N_Assignment_Statement node. It is used only
1026 -- if the type being assigned is an array type, and is set if analysis
1027 -- determines that it is definitely safe to do the copy forwards, i.e.
1028 -- starting at the lowest addressed element. Note that if neither of the
1029 -- flags Forwards_OK or Backwards_OK is set, it means that the front end
1030 -- could not determine that either direction is definitely safe, and a
1031 -- runtime check is required.
1033 -- From_At_End (Flag4-Sem)
1034 -- This flag is set on an N_Raise_Statement node if it corresponds to
1035 -- the reraise statement generated as the last statement of an AT END
1036 -- handler when SJLJ exception handling is active. It is used to stop
1037 -- a bogus violation of restriction (No_Exception_Propagation), bogus
1038 -- because if the restriction is set, the reraise is not generated.
1040 -- From_At_Mod (Flag4-Sem)
1041 -- This flag is set on the attribute definition clause node that is
1042 -- generated by a transformation of an at mod phrase in a record
1043 -- representation clause. This is used to give slightly different (Ada 83
1044 -- compatible) semantics to such a clause, namely it is used to specify a
1045 -- minimum acceptable alignment for the base type and all subtypes. In
1046 -- Ada 95 terms, the actual alignment of the base type and all subtypes
1047 -- must be a multiple of the given value, and the representation clause
1048 -- is considered to be type specific instead of subtype specific.
1050 -- From_Default (Flag6-Sem)
1051 -- This flag is set on the subprogram renaming declaration created in an
1052 -- instance for a formal subprogram, when the formal is declared with a
1053 -- box, and there is no explicit actual. If the flag is present, the
1054 -- declaration is treated as an implicit reference to the formal in the
1057 -- Generic_Parent (Node5-Sem)
1058 -- Generic_Parent is defined on declaration nodes that are instances. The
1059 -- value of Generic_Parent is the generic entity from which the instance
1060 -- is obtained. Generic_Parent is also defined for the renaming
1061 -- declarations and object declarations created for the actuals in an
1062 -- instantiation. The generic parent of such a declaration is the
1063 -- corresponding generic association in the Instantiation node.
1065 -- Generic_Parent_Type (Node4-Sem)
1066 -- Generic_Parent_Type is defined on Subtype_Declaration nodes for the
1067 -- actuals of formal private and derived types. Within the instance, the
1068 -- operations on the actual are those inherited from the parent. For a
1069 -- formal private type, the parent type is the generic type itself. The
1070 -- Generic_Parent_Type is also used in an instance to determine whether a
1071 -- private operation overrides an inherited one.
1073 -- Handler_List_Entry (Node2-Sem)
1074 -- This field is present in N_Object_Declaration nodes. It is set only
1075 -- for the Handler_Record entry generated for an exception in zero cost
1076 -- exception handling mode. It references the corresponding item in the
1077 -- handler list, and is used to delete this entry if the corresponding
1078 -- handler is deleted during optimization. For further details on why
1079 -- this is required, see Exp_Ch11.Remove_Handler_Entries.
1081 -- Has_No_Elaboration_Code (Flag17-Sem)
1082 -- A flag that appears in the N_Compilation_Unit node to indicate whether
1083 -- or not elaboration code is present for this unit. It is initially set
1084 -- true for subprogram specs and bodies and for all generic units and
1085 -- false for non-generic package specs and bodies. Gigi may set the flag
1086 -- in the non-generic package case if it determines that no elaboration
1087 -- code is generated. Note that this flag is not related to the
1088 -- Is_Preelaborated status, there can be preelaborated packages that
1089 -- generate elaboration code, and non-preelaborated packages which do
1090 -- not generate elaboration code.
1092 -- Has_Priority_Pragma (Flag6-Sem)
1093 -- A flag present in N_Subprogram_Body, N_Task_Definition and
1094 -- N_Protected_Definition nodes to flag the presence of either a Priority
1095 -- or Interrupt_Priority pragma in the declaration sequence (public or
1096 -- private in the task and protected cases)
1098 -- Has_Private_View (Flag11-Sem)
1099 -- A flag present in generic nodes that have an entity, to indicate that
1100 -- the node has a private type. Used to exchange private and full
1101 -- declarations if the visibility at instantiation is different from the
1102 -- visibility at generic definition.
1104 -- Has_Relative_Deadline_Pragma (Flag9-Sem)
1105 -- A flag present in N_Subprogram_Body and N_Task_Definition nodes to
1106 -- flag the presence of a pragma Relative_Deadline.
1108 -- Has_Self_Reference (Flag13-Sem)
1109 -- Present in N_Aggregate and N_Extension_Aggregate. Indicates that one
1110 -- of the expressions contains an access attribute reference to the
1111 -- enclosing type. Such a self-reference can only appear in default-
1112 -- initialized aggregate for a record type.
1114 -- Has_Storage_Size_Pragma (Flag5-Sem)
1115 -- A flag present in an N_Task_Definition node to flag the presence of a
1116 -- Storage_Size pragma.
1118 -- Has_Task_Info_Pragma (Flag7-Sem)
1119 -- A flag present in an N_Task_Definition node to flag the presence of a
1120 -- Task_Info pragma. Used to detect duplicate pragmas.
1122 -- Has_Task_Name_Pragma (Flag8-Sem)
1123 -- A flag present in N_Task_Definition nodes to flag the presence of a
1124 -- Task_Name pragma in the declaration sequence for the task.
1126 -- Has_Wide_Character (Flag11-Sem)
1127 -- Present in string literals, set if any wide character (i.e. character
1128 -- code outside the Character range) appears in the string.
1130 -- Hidden_By_Use_Clause (Elist4-Sem)
1131 -- An entity list present in use clauses that appear within
1132 -- instantiations. For the resolution of local entities, entities
1133 -- introduced by these use clauses have priority over global ones, and
1134 -- outer entities must be explicitly hidden/restored on exit.
1136 -- Implicit_With (Flag16-Sem)
1137 -- This flag is set in the N_With_Clause node that is implicitly
1138 -- generated for runtime units that are loaded by the expander, and also
1139 -- for package System, if it is loaded implicitly by a use of the
1140 -- 'Address or 'Tag attribute.
1142 -- Includes_Infinities (Flag11-Sem)
1143 -- This flag is present in N_Range nodes. It is set for the range of
1144 -- unconstrained float types defined in Standard, which include not only
1145 -- the given range of values, but also legitimately can include infinite
1146 -- values. This flag is false for any float type for which an explicit
1147 -- range is given by the programmer, even if that range is identical to
1148 -- the range for Float.
1150 -- Instance_Spec (Node5-Sem)
1151 -- This field is present in generic instantiation nodes, and also in
1152 -- formal package declaration nodes (formal package declarations are
1153 -- treated in a manner very similar to package instantiations). It points
1154 -- to the node for the spec of the instance, inserted as part of the
1155 -- semantic processing for instantiations in Sem_Ch12.
1157 -- Is_Asynchronous_Call_Block (Flag7-Sem)
1158 -- A flag set in a Block_Statement node to indicate that it is the
1159 -- expansion of an asynchronous entry call. Such a block needs cleanup
1160 -- handler to assure that the call is cancelled.
1162 -- Is_Component_Left_Opnd (Flag13-Sem)
1163 -- Is_Component_Right_Opnd (Flag14-Sem)
1164 -- Present in concatenation nodes, to indicate that the corresponding
1165 -- operand is of the component type of the result. Used in resolving
1166 -- concatenation nodes in instances.
1168 -- Is_Controlling_Actual (Flag16-Sem)
1169 -- This flag is set on in an expression that is a controlling argument in
1170 -- a dispatching call. It is off in all other cases. See Sem_Disp for
1171 -- details of its use.
1173 -- Is_Dynamic_Coextension (Flag18-Sem)
1174 -- Present in allocator nodes, to indicate that this is an allocator
1175 -- for an access discriminant of a dynamically allocated object. The
1176 -- coextension must be deallocated and finalized at the same time as
1177 -- the enclosing object.
1179 -- Is_Entry_Barrier_Function (Flag8-Sem)
1180 -- This flag is set in an N_Subprogram_Body node which is the expansion
1181 -- of an entry barrier from a protected entry body. It is used for the
1182 -- circuitry checking for incorrect use of Current_Task.
1184 -- Is_Expanded_Build_In_Place_Call (Flag11-Sem)
1185 -- This flag is set in an N_Function_Call node to indicate that the extra
1186 -- actuals to support a build-in-place style of call have been added to
1189 -- Is_In_Discriminant_Check (Flag11-Sem)
1190 -- This flag is present in a selected component, and is used to indicate
1191 -- that the reference occurs within a discriminant check. The
1192 -- significance is that optimizations based on assuming that the
1193 -- discriminant check has a correct value cannot be performed in this
1194 -- case (or the discriminant check may be optimized away!)
1196 -- Is_Machine_Number (Flag11-Sem)
1197 -- This flag is set in an N_Real_Literal node to indicate that the value
1198 -- is a machine number. This avoids some unnecessary cases of converting
1199 -- real literals to machine numbers.
1201 -- Is_Null_Loop (Flag16-Sem)
1202 -- This flag is set in an N_Loop_Statement node if the corresponding loop
1203 -- can be determined to be null at compile time. This is used to suppress
1204 -- any warnings that would otherwise be issued inside the loop since they
1205 -- are probably not useful.
1207 -- Is_Overloaded (Flag5-Sem)
1208 -- A flag present in all expression nodes. Used temporarily during
1209 -- overloading determination. The setting of this flag is not relevant
1210 -- once overloading analysis is complete.
1212 -- Is_Power_Of_2_For_Shift (Flag13-Sem)
1213 -- A flag present only in N_Op_Expon nodes. It is set when the
1214 -- exponentiation is of the form 2 ** N, where the type of N is an
1215 -- unsigned integral subtype whose size does not exceed the size of
1216 -- Standard_Integer (i.e. a type that can be safely converted to
1217 -- Natural), and the exponentiation appears as the right operand of an
1218 -- integer multiplication or an integer division where the dividend is
1219 -- unsigned. It is also required that overflow checking is off for both
1220 -- the exponentiation and the multiply/divide node. If this set of
1221 -- conditions holds, and the flag is set, then the division or
1222 -- multiplication can be (and is) converted to a shift.
1224 -- Is_Protected_Subprogram_Body (Flag7-Sem)
1225 -- A flag set in a Subprogram_Body block to indicate that it is the
1226 -- implementation of a protected subprogram. Such a body needs cleanup
1227 -- handler to make sure that the associated protected object is unlocked
1228 -- when the subprogram completes.
1230 -- Is_Static_Coextension (Flag14-Sem)
1231 -- Present in N_Allocator nodes. Set if the allocator is a coextension
1232 -- of an object allocated on the stack rather than the heap.
1234 -- Is_Static_Expression (Flag6-Sem)
1235 -- Indicates that an expression is a static expression (RM 4.9). See spec
1236 -- of package Sem_Eval for full details on the use of this flag.
1238 -- Is_Subprogram_Descriptor (Flag16-Sem)
1239 -- Present in N_Object_Declaration, and set only for the object
1240 -- declaration generated for a subprogram descriptor in fast exception
1241 -- mode. See Exp_Ch11 for details of use.
1243 -- Is_Task_Allocation_Block (Flag6-Sem)
1244 -- A flag set in a Block_Statement node to indicate that it is the
1245 -- expansion of a task allocator, or the allocator of an object
1246 -- containing tasks. Such a block requires a cleanup handler to call
1247 -- Expunge_Unactivated_Tasks to complete any tasks that have been
1248 -- allocated but not activated when the allocator completes abnormally.
1250 -- Is_Task_Master (Flag5-Sem)
1251 -- A flag set in a Subprogram_Body, Block_Statement or Task_Body node to
1252 -- indicate that the construct is a task master (i.e. has declared tasks
1253 -- or declares an access to a task type).
1255 -- Itype (Node1-Sem)
1256 -- Used in N_Itype_Reference node to reference an itype for which it is
1257 -- important to ensure that it is defined. See description of this node
1258 -- for further details.
1260 -- Kill_Range_Check (Flag11-Sem)
1261 -- Used in an N_Unchecked_Type_Conversion node to indicate that the
1262 -- result should not be subjected to range checks. This is used for the
1263 -- implementation of Normalize_Scalars.
1265 -- Label_Construct (Node2-Sem)
1266 -- Used in an N_Implicit_Label_Declaration node. Refers to an N_Label,
1267 -- N_Block_Statement or N_Loop_Statement node to which the label
1268 -- declaration applies. This is not currently used in the compiler
1269 -- itself, but it is useful in the implementation of ASIS queries.
1270 -- This field is left empty for the special labels generated as part
1271 -- of expanding raise statements with a local exception handler.
1273 -- Library_Unit (Node4-Sem)
1274 -- In a stub node, Library_Unit points to the compilation unit node of
1275 -- the corresponding subunit.
1277 -- In a with clause node, Library_Unit points to the spec of the with'ed
1280 -- In a compilation unit node, the usage depends on the unit type:
1282 -- For a subprogram body, Library_Unit points to the compilation unit
1283 -- node of the corresponding spec, unless Acts_As_Spec is set, in which
1284 -- case it points to itself.
1286 -- For a package body, Library_Unit points to the compilation unit of
1287 -- the corresponding package spec.
1289 -- For a subprogram spec to which pragma Inline applies, Library_Unit
1290 -- points to the compilation unit node of the corresponding body, if
1291 -- inlining is active.
1293 -- For a generic declaration, Library_Unit points to the compilation
1294 -- unit node of the corresponding generic body.
1296 -- For a subunit, Library_Unit points to the compilation unit node of
1299 -- Note that this field is not used to hold the parent pointer for child
1300 -- unit (which might in any case need to use it for some other purpose as
1301 -- described above). Instead for a child unit, implicit with's are
1302 -- generated for all parents.
1304 -- Local_Raise_Statements (Elist1)
1305 -- This field is present in exception handler nodes. It is set to
1306 -- No_Elist in the normal case. If there is at least one raise statement
1307 -- which can potentially be handled as a local raise, then this field
1308 -- points to a list of raise nodes, which are calls to a routine to raise
1309 -- an exception. These are raise nodes which can be optimized into gotos
1310 -- if the handler turns out to meet the conditions which permit this
1311 -- transformation. Note that this does NOT include instances of the
1312 -- N_Raise_xxx_Error nodes since the transformation of these nodes is
1313 -- handled by the back end (using the N_Push/N_Pop mechanism).
1315 -- Loop_Actions (List2-Sem)
1316 -- A list present in Component_Association nodes in array aggregates.
1317 -- Used to collect actions that must be executed within the loop because
1318 -- they may need to be evaluated anew each time through.
1320 -- Limited_View_Installed (Flag18-Sem)
1321 -- Present in With_Clauses and in package specifications. If set on
1322 -- with_clause, it indicates that this clause has created the current
1323 -- limited view of the designated package. On a package specification, it
1324 -- indicates that the limited view has already been created because the
1325 -- package is mentioned in a limited_with_clause in the closure of the
1326 -- unit being compiled.
1328 -- Local_Raise_Not_OK (Flag7-Sem)
1329 -- Present in N_Exception_Handler nodes. Set if the handler contains
1330 -- a construct (reraise statement, or call to subprogram in package
1331 -- GNAT.Current_Exception) that makes the handler unsuitable as a target
1332 -- for a local raise (one that could otherwise be converted to a goto).
1334 -- Must_Be_Byte_Aligned (Flag14-Sem)
1335 -- This flag is present in N_Attribute_Reference nodes. It can be set
1336 -- only for the Address and Unrestricted_Access attributes. If set it
1337 -- means that the object for which the address/access is given must be on
1338 -- a byte (more accurately a storage unit) boundary. If necessary, a copy
1339 -- of the object is to be made before taking the address (this copy is in
1340 -- the current scope on the stack frame). This is used for certain cases
1341 -- of code generated by the expander that passes parameters by address.
1343 -- The reason the copy is not made by the front end is that the back end
1344 -- has more information about type layout and may be able to (but is not
1345 -- guaranteed to) prevent making unnecessary copies.
1347 -- Must_Not_Freeze (Flag8-Sem)
1348 -- A flag present in all expression nodes. Normally expressions cause
1349 -- freezing as described in the RM. If this flag is set, then this is
1350 -- inhibited. This is used by the analyzer and expander to label nodes
1351 -- that are created by semantic analysis or expansion and which must not
1352 -- cause freezing even though they normally would. This flag is also
1353 -- present in an N_Subtype_Indication node, since we also use these in
1354 -- calls to Freeze_Expression.
1356 -- Next_Entity (Node2-Sem)
1357 -- Present in defining identifiers, defining character literals and
1358 -- defining operator symbols (i.e. in all entities). The entities of a
1359 -- scope are chained, and this field is used as the forward pointer for
1360 -- this list. See Einfo for further details.
1362 -- Next_Named_Actual (Node4-Sem)
1363 -- Present in parameter association node. Set during semantic analysis to
1364 -- point to the next named parameter, where parameters are ordered by
1365 -- declaration order (as opposed to the actual order in the call, which
1366 -- may be different due to named associations). Not that this field
1367 -- points to the explicit actual parameter itself, not to the
1368 -- N_Parameter_Association node (its parent).
1370 -- Next_Pragma (Node1-Sem)
1371 -- Present in N_Pragma nodes. Used to create a linked list of pragma
1372 -- nodes. Currently used for two purposes:
1374 -- Create a list of linked Check_Policy pragmas. The head of this list
1375 -- is stored in Opt.Check_Policy_List (which has further details).
1377 -- Used by processing for Pre/Postcondition pragmas to store a list of
1378 -- pragmas associated with the spec of a subprogram (see Sem_Prag for
1381 -- Next_Rep_Item (Node5-Sem)
1382 -- Present in pragma nodes and attribute definition nodes. Used to link
1383 -- representation items that apply to an entity. See description of
1384 -- First_Rep_Item field in Einfo for full details.
1386 -- Next_Use_Clause (Node3-Sem)
1387 -- While use clauses are active during semantic processing, they are
1388 -- chained from the scope stack entry, using Next_Use_Clause as a link
1389 -- pointer, with Empty marking the end of the list. The head pointer is
1390 -- in the scope stack entry (First_Use_Clause). At the end of semantic
1391 -- processing (i.e. when Gigi sees the tree, the contents of this field
1392 -- is undefined and should not be read).
1394 -- No_Ctrl_Actions (Flag7-Sem)
1395 -- Present in N_Assignment_Statement to indicate that no finalize nor nor
1396 -- adjust should take place on this assignment even though the rhs is
1397 -- controlled. This is used in init procs and aggregate expansions where
1398 -- the generated assignments are more initialisations than real
1401 -- No_Elaboration_Check (Flag14-Sem)
1402 -- Present in N_Function_Call and N_Procedure_Call_Statement. Indicates
1403 -- that no elaboration check is needed on the call, because it appears in
1404 -- the context of a local Suppress pragma. This is used on calls within
1405 -- task bodies, where the actual elaboration checks are applied after
1406 -- analysis, when the local scope stack is not present.
1408 -- No_Entities_Ref_In_Spec (Flag8-Sem)
1409 -- Present in N_With_Clause nodes. Set if the with clause is on the
1410 -- package or subprogram spec where the main unit is the corresponding
1411 -- body, and no entities of the with'ed unit are referenced by the spec
1412 -- (an entity may still be referenced in the body, so this flag is used
1413 -- to generate the proper message (see Sem_Util.Check_Unused_Withs for
1416 -- No_Initialization (Flag13-Sem)
1417 -- Present in N_Object_Declaration & N_Allocator to indicate that the
1418 -- object must not be initialized (by Initialize or call to an init
1419 -- proc). This is needed for controlled aggregates. When the Object
1420 -- declaration has an expression, this flag means that this expression
1421 -- should not be taken into account (needed for in place initialization
1424 -- No_Truncation (Flag17-Sem)
1425 -- Present in N_Unchecked_Type_Conversion node. This flag has an effect
1426 -- only if the RM_Size of the source is greater than the RM_Size of the
1427 -- target for scalar operands. Normally in such a case we truncate some
1428 -- higher order bits of the source, and then sign/zero extend the result
1429 -- to form the output value. But if this flag is set, then we do not do
1430 -- any truncation, so for example, if an 8 bit input is converted to 5
1431 -- bit result which is in fact stored in 8 bits, then the high order
1432 -- three bits of the target result will be copied from the source. This
1433 -- is used for properly setting out of range values for use by pragmas
1434 -- Initialize_Scalars and Normalize_Scalars.
1436 -- Original_Discriminant (Node2-Sem)
1437 -- Present in identifiers. Used in references to discriminants that
1438 -- appear in generic units. Because the names of the discriminants may be
1439 -- different in an instance, we use this field to recover the position of
1440 -- the discriminant in the original type, and replace it with the
1441 -- discriminant at the same position in the instantiated type.
1443 -- Original_Entity (Node2-Sem)
1444 -- Present in numeric literals. Used to denote the named number that has
1445 -- been constant-folded into the given literal. If literal is from
1446 -- source, or the result of some other constant-folding operation, then
1447 -- Original_Entity is empty. This field is needed to handle properly
1448 -- named numbers in generic units, where the Associated_Node field
1449 -- interferes with the Entity field, making it impossible to preserve the
1450 -- original entity at the point of instantiation (ASIS problem).
1452 -- Others_Discrete_Choices (List1-Sem)
1453 -- When a case statement or variant is analyzed, the semantic checks
1454 -- determine the actual list of choices that correspond to an others
1455 -- choice. This list is materialized for later use by the expander and
1456 -- the Others_Discrete_Choices field of an N_Others_Choice node points to
1457 -- this materialized list of choices, which is in standard format for a
1458 -- list of discrete choices, except that of course it cannot contain an
1459 -- N_Others_Choice entry.
1461 -- Parameter_List_Truncated (Flag17-Sem)
1462 -- Present in N_Function_Call and N_Procedure_Call_Statement nodes. Set
1463 -- (for OpenVMS ports of GNAT only) if the parameter list is truncated as
1464 -- a result of a First_Optional_Parameter specification in an
1465 -- Import_Function, Import_Procedure, or Import_Valued_Procedure pragma.
1466 -- The truncation is done by the expander by removing trailing parameters
1467 -- from the argument list, in accordance with the set of rules allowing
1468 -- such parameter removal. In particular, parameters can be removed
1469 -- working from the end of the parameter list backwards up to and
1470 -- including the entry designated by First_Optional_Parameter in the
1471 -- Import pragma. Parameters can be removed if they are implicit and the
1472 -- default value is a known-at-compile-time value, including the use of
1473 -- the Null_Parameter attribute, or if explicit parameter values are
1474 -- present that match the corresponding defaults.
1476 -- Parent_Spec (Node4-Sem)
1477 -- For a library unit that is a child unit spec (package or subprogram
1478 -- declaration, generic declaration or instantiation, or library level
1479 -- rename, this field points to the compilation unit node for the parent
1480 -- package specification. This field is Empty for library bodies (the
1481 -- parent spec in this case can be found from the corresponding spec).
1483 -- PPC_Enabled (Flag5-Sem)
1484 -- Present in N_Pragma nodes. This flag is relevant only for precondition
1485 -- and postcondition nodes. It is true if the check corresponding to the
1486 -- pragma type is enabled at the point where the pragma appears.
1488 -- Present_Expr (Uint3-Sem)
1489 -- Present in an N_Variant node. This has a meaningful value only after
1490 -- Gigi has back annotated the tree with representation information. At
1491 -- this point, it contains a reference to a gcc expression that depends
1492 -- on the values of one or more discriminants. Give a set of discriminant
1493 -- values, this expression evaluates to False (zero) if variant is not
1494 -- present, and True (non-zero) if it is present. See unit Repinfo for
1495 -- further details on gigi back annotation. This field is used during
1496 -- ASIS processing (data decomposition annex) to determine if a field is
1499 -- Print_In_Hex (Flag13-Sem)
1500 -- Set on an N_Integer_Literal node to indicate that the value should be
1501 -- printed in hexadecimal in the sprint listing. Has no effect on
1502 -- legality or semantics of program, only on the displayed output. This
1503 -- is used to clarify output from the packed array cases.
1505 -- Procedure_To_Call (Node2-Sem)
1506 -- Present in N_Allocator, N_Free_Statement, N_Simple_Return_Statement,
1507 -- and N_Extended_Return_Statement nodes. References the entity for the
1508 -- declaration of the procedure to be called to accomplish the required
1509 -- operation (i.e. for the Allocate procedure in the case of N_Allocator
1510 -- and N_Simple_Return_Statement and N_Extended_Return_Statement (for
1511 -- allocating the return value), and for the Deallocate procedure in the
1512 -- case of N_Free_Statement.
1514 -- Raises_Constraint_Error (Flag7-Sem)
1515 -- Set on an expression whose evaluation will definitely fail constraint
1516 -- error check. In the case of static expressions, this flag must be set
1517 -- accurately (and if it is set, the expression is typically illegal
1518 -- unless it appears as a non-elaborated branch of a short-circuit form).
1519 -- For a non-static expression, this flag may be set whenever an
1520 -- expression (e.g. an aggregate) is known to raise constraint error. If
1521 -- set, the expression definitely will raise CE if elaborated at runtime.
1522 -- If not set, the expression may or may not raise CE. In other words, on
1523 -- static expressions, the flag is set accurately, on non-static
1524 -- expressions it is set conservatively.
1526 -- Redundant_Use (Flag13-Sem)
1527 -- Present in nodes that can appear as an operand in a use clause or use
1528 -- type clause (identifiers, expanded names, attribute references). Set
1529 -- to indicate that a use is redundant (and therefore need not be undone
1532 -- Renaming_Exception (Node2-Sem)
1533 -- Present in N_Exception_Declaration node. Used to point back to the
1534 -- exception renaming for an exception declared within a subprogram.
1535 -- What happens is that an exception declared in a subprogram is moved
1536 -- to the library level with a unique name, and the original exception
1537 -- becomes a renaming. This link from the library level exception to the
1538 -- renaming declaration allows registering of the proper exception name.
1540 -- Return_Statement_Entity (Node5-Sem)
1541 -- Present in N_Simple_Return_Statement and N_Extended_Return_Statement.
1542 -- Points to an E_Return_Statement representing the return statement.
1544 -- Return_Object_Declarations (List3)
1545 -- Present in N_Extended_Return_Statement.
1546 -- Points to a list initially containing a single
1547 -- N_Object_Declaration representing the return object.
1548 -- We use a list (instead of just a pointer to the object decl)
1549 -- because Analyze wants to insert extra actions on this list.
1551 -- Rounded_Result (Flag18-Sem)
1552 -- Present in N_Type_Conversion, N_Op_Divide and N_Op_Multiply nodes.
1553 -- Used in the fixed-point cases to indicate that the result must be
1554 -- rounded as a result of the use of the 'Round attribute. Also used for
1555 -- integer N_Op_Divide nodes to indicate that the result should be
1556 -- rounded to the nearest integer (breaking ties away from zero), rather
1557 -- than truncated towards zero as usual. These rounded integer operations
1558 -- are the result of expansion of rounded fixed-point divide, conversion
1559 -- and multiplication operations.
1561 -- Scope (Node3-Sem)
1562 -- Present in defining identifiers, defining character literals and
1563 -- defining operator symbols (i.e. in all entities). The entities of a
1564 -- scope all use this field to reference the corresponding scope entity.
1565 -- See Einfo for further details.
1567 -- Shift_Count_OK (Flag4-Sem)
1568 -- A flag present in shift nodes to indicate that the shift count is
1569 -- known to be in range, i.e. is in the range from zero to word length
1570 -- minus one. If this flag is not set, then the shift count may be
1571 -- outside this range, i.e. larger than the word length, and the code
1572 -- must ensure that such shift counts give the appropriate result.
1574 -- Source_Type (Node1-Sem)
1575 -- Used in an N_Validate_Unchecked_Conversion node to point to the
1576 -- source type entity for the unchecked conversion instantiation
1577 -- which gigi must do size validation for.
1579 -- Static_Processing_OK (Flag4-Sem)
1580 -- Present in N_Aggregate nodes. When the Compile_Time_Known_Aggregate
1581 -- flag is set, the full value of the aggregate can be determined at
1582 -- compile time and the aggregate can be passed as is to the back-end.
1583 -- In this event it is irrelevant whether this flag is set or not.
1584 -- However, if the flag Compile_Time_Known_Aggregate is not set but
1585 -- Static_Processing_OK is set, the aggregate can (but need not) be
1586 -- converted into a compile time known aggregate by the expander. See
1587 -- Sem_Aggr for the specific conditions under which an aggregate has its
1588 -- Static_Processing_OK flag set.
1590 -- Storage_Pool (Node1-Sem)
1591 -- Present in N_Allocator, N_Free_Statement, N_Simple_Return_Statement,
1592 -- and N_Extended_Return_Statement nodes. References the entity for the
1593 -- storage pool to be used for the allocate or free call or for the
1594 -- allocation of the returned value from function. Empty indicates that
1595 -- the global default default pool is to be used. Note that in the case
1596 -- of a return statement, this field is set only if the function returns
1597 -- value of a type whose size is not known at compile time on the
1600 -- Target_Type (Node2-Sem)
1601 -- Used in an N_Validate_Unchecked_Conversion node to point to the target
1602 -- type entity for the unchecked conversion instantiation which gigi must
1603 -- do size validation for.
1605 -- Then_Actions (List3-Sem)
1606 -- This field is present in conditional expression nodes. During code
1607 -- expansion we use the Insert_Actions procedure (in Exp_Util) to insert
1608 -- actions at an appropriate place in the tree to get elaborated at the
1609 -- right time. For conditional expressions, we have to be sure that the
1610 -- actions for the Then branch are only elaborated if the condition is
1611 -- True. The Then_Actions field is used as a temporary parking place for
1612 -- these actions. The final tree is always rewritten to eliminate the
1613 -- need for this field, so in the tree passed to Gigi, this field is
1614 -- always set to No_List.
1616 -- Treat_Fixed_As_Integer (Flag14-Sem)
1617 -- This flag appears in operator nodes for divide, multiply, mod and rem
1618 -- on fixed-point operands. It indicates that the operands are to be
1619 -- treated as integer values, ignoring small values. This flag is only
1620 -- set as a result of expansion of fixed-point operations. Typically a
1621 -- fixed-point multiplication in the source generates subsidiary
1622 -- multiplication and division operations that work with the underlying
1623 -- integer values and have this flag set. Note that this flag is not
1624 -- needed on other arithmetic operations (add, neg, subtract etc.) since
1625 -- in these cases it is always the case that fixed is treated as integer.
1626 -- The Etype field MUST be set if this flag is set. The analyzer knows to
1627 -- leave such nodes alone, and whoever makes them must set the correct
1630 -- TSS_Elist (Elist3-Sem)
1631 -- Present in N_Freeze_Entity nodes. Holds an element list containing
1632 -- entries for each TSS (type support subprogram) associated with the
1633 -- frozen type. The elements of the list are the entities for the
1634 -- subprograms (see package Exp_TSS for further details). Set to No_Elist
1635 -- if there are no type support subprograms for the type or if the freeze
1636 -- node is not for a type.
1638 -- Unreferenced_In_Spec (Flag7-Sem)
1639 -- Present in N_With_Clause nodes. Set if the with clause is on the
1640 -- package or subprogram spec where the main unit is the corresponding
1641 -- body, and is not referenced by the spec (it may still be referenced by
1642 -- the body, so this flag is used to generate the proper message (see
1643 -- Sem_Util.Check_Unused_Withs for details)
1645 -- Was_Originally_Stub (Flag13-Sem)
1646 -- This flag is set in the node for a proper body that replaces stub.
1647 -- During the analysis procedure, stubs in some situations get rewritten
1648 -- by the corresponding bodies, and we set this flag to remember that
1649 -- this happened. Note that it is not good enough to rely on the use of
1650 -- Original_Node here because of the case of nested instantiations where
1651 -- the substituted node can be copied.
1653 -- Zero_Cost_Handling (Flag5-Sem)
1654 -- This flag is set in all handled sequence of statement and exception
1655 -- handler nodes if exceptions are to be handled using the zero-cost
1656 -- mechanism (see Ada.Exceptions and System.Exceptions in files
1657 -- a-except.ads/adb and s-except.ads for full details). What gigi needs
1658 -- to do for such a handler is simply to put the code in the handler
1659 -- somewhere. The front end has generated all necessary labels.
1661 --------------------------------------------------
1662 -- Note on Use of End_Label and End_Span Fields --
1663 --------------------------------------------------
1665 -- Several constructs have end lines:
1667 -- Loop Statement end loop [loop_IDENTIFIER];
1668 -- Package Specification end [[PARENT_UNIT_NAME .] IDENTIFIER]
1669 -- Task Definition end [task_IDENTIFIER]
1670 -- Protected Definition end [protected_IDENTIFIER]
1671 -- Protected Body end [protected_IDENTIFIER]
1673 -- Block Statement end [block_IDENTIFIER];
1674 -- Subprogram Body end [DESIGNATOR];
1675 -- Package Body end [[PARENT_UNIT_NAME .] IDENTIFIER];
1676 -- Task Body end [task_IDENTIFIER];
1677 -- Accept Statement end [entry_IDENTIFIER]];
1678 -- Entry Body end [entry_IDENTIFIER];
1680 -- If Statement end if;
1681 -- Case Statement end case;
1683 -- Record Definition end record;
1684 -- Enumeration Definition );
1686 -- The End_Label and End_Span fields are used to mark the locations of
1687 -- these lines, and also keep track of the label in the case where a label
1690 -- For the first group above, the End_Label field of the corresponding node
1691 -- is used to point to the label identifier. In the case where there is no
1692 -- label in the source, the parser supplies a dummy identifier (with
1693 -- Comes_From_Source set to False), and the Sloc of this dummy identifier
1694 -- marks the location of the token following the END token.
1696 -- For the second group, the use of End_Label is similar, but the End_Label
1697 -- is found in the N_Handled_Sequence_Of_Statements node. This is done
1698 -- simply because in some cases there is no room in the parent node.
1700 -- For the third group, there is never any label, and instead of using
1701 -- End_Label, we use the End_Span field which gives the location of the
1702 -- token following END, relative to the starting Sloc of the construct,
1703 -- i.e. add Sloc (Node) + End_Span (Node) to get the Sloc of the IF or CASE
1704 -- following the End_Label.
1706 -- The record definition case is handled specially, we treat it as though
1707 -- it required an optional label which is never present, and so the parser
1708 -- always builds a dummy identifier with Comes From Source set False. The
1709 -- reason we do this, rather than using End_Span in this case, is that we
1710 -- want to generate a cross-ref entry for the end of a record, since it
1711 -- represents a scope for name declaration purposes.
1713 -- The enumeration definition case is handled in an exactly similar manner,
1714 -- building a dummy identifier to get a cross-reference.
1716 -- Note: the reason we store the difference as a Uint, instead of storing
1717 -- the Source_Ptr value directly, is that Source_Ptr values cannot be
1718 -- distinguished from other types of values, and we count on all general
1719 -- use fields being self describing. To make things easier for clients,
1720 -- note that we provide function End_Location, and procedure
1721 -- Set_End_Location to allow access to the logical value (which is the
1722 -- Source_Ptr value for the end token).
1724 ---------------------
1725 -- Syntactic Nodes --
1726 ---------------------
1728 ---------------------
1729 -- 2.3 Identifier --
1730 ---------------------
1732 -- IDENTIFIER ::= IDENTIFIER_LETTER {[UNDERLINE] LETTER_OR_DIGIT}
1733 -- LETTER_OR_DIGIT ::= IDENTIFIER_LETTER | DIGIT
1735 -- An IDENTIFIER shall not be a reserved word
1737 -- In the Ada grammar identifiers are the bottom level tokens which have
1738 -- very few semantics. Actual program identifiers are direct names. If
1739 -- we were being 100% honest with the grammar, then we would have a node
1740 -- called N_Direct_Name which would point to an identifier. However,
1741 -- that's too many extra nodes, so we just use the N_Identifier node
1742 -- directly as a direct name, and it contains the expression fields and
1743 -- Entity field that correspond to its use as a direct name. In those
1744 -- few cases where identifiers appear in contexts where they are not
1745 -- direct names (pragmas, pragma argument associations, attribute
1746 -- references and attribute definition clauses), the Chars field of the
1747 -- node contains the Name_Id for the identifier name.
1749 -- Note: in GNAT, a reserved word can be treated as an identifier in two
1750 -- cases. First, an incorrect use of a reserved word as an identifier is
1751 -- diagnosed and then treated as a normal identifier. Second, an
1752 -- attribute designator of the form of a reserved word (access, delta,
1753 -- digits, range) is treated as an identifier.
1755 -- Note: The set of letters that is permitted in an identifier depends
1756 -- on the character set in use. See package Csets for full details.
1759 -- Sloc points to identifier
1760 -- Chars (Name1) contains the Name_Id for the identifier
1761 -- Entity (Node4-Sem)
1762 -- Associated_Node (Node4-Sem)
1763 -- Original_Discriminant (Node2-Sem)
1764 -- Redundant_Use (Flag13-Sem)
1765 -- Has_Private_View (Flag11-Sem) (set in generic units)
1766 -- plus fields for expression
1768 --------------------------
1769 -- 2.4 Numeric Literal --
1770 --------------------------
1772 -- NUMERIC_LITERAL ::= DECIMAL_LITERAL | BASED_LITERAL
1774 ----------------------------
1775 -- 2.4.1 Decimal Literal --
1776 ----------------------------
1778 -- DECIMAL_LITERAL ::= NUMERAL [.NUMERAL] [EXPONENT]
1780 -- NUMERAL ::= DIGIT {[UNDERLINE] DIGIT}
1782 -- EXPONENT ::= E [+] NUMERAL | E - NUMERAL
1784 -- Decimal literals appear in the tree as either integer literal nodes
1785 -- or real literal nodes, depending on whether a period is present.
1787 -- Note: literal nodes appear as a result of direct use of literals
1788 -- in the source program, and also as the result of evaluating
1789 -- expressions at compile time. In the latter case, it is possible
1790 -- to construct real literals that have no syntactic representation
1791 -- using the standard literal format. Such literals are listed by
1792 -- Sprint using the notation [numerator / denominator].
1794 -- Note: the value of an integer literal node created by the front end
1795 -- is never outside the range of values of the base type. However, it
1796 -- can be the case that the value is outside the range of the
1797 -- particular subtype. This happens in the case of integer overflows
1798 -- with checks suppressed.
1800 -- N_Integer_Literal
1801 -- Sloc points to literal
1802 -- Original_Entity (Node2-Sem) If not Empty, holds Named_Number that
1803 -- has been constant-folded into its literal value.
1804 -- Intval (Uint3) contains integer value of literal
1805 -- plus fields for expression
1806 -- Print_In_Hex (Flag13-Sem)
1809 -- Sloc points to literal
1810 -- Original_Entity (Node2-Sem) If not Empty, holds Named_Number that
1811 -- has been constant-folded into its literal value.
1812 -- Realval (Ureal3) contains real value of literal
1813 -- Corresponding_Integer_Value (Uint4-Sem)
1814 -- Is_Machine_Number (Flag11-Sem)
1815 -- plus fields for expression
1817 --------------------------
1818 -- 2.4.2 Based Literal --
1819 --------------------------
1821 -- BASED_LITERAL ::=
1822 -- BASE # BASED_NUMERAL [.BASED_NUMERAL] # [EXPONENT]
1826 -- BASED_NUMERAL ::=
1827 -- EXTENDED_DIGIT {[UNDERLINE] EXTENDED_DIGIT}
1829 -- EXTENDED_DIGIT ::= DIGIT | A | B | C | D | E | F
1831 -- Based literals appear in the tree as either integer literal nodes
1832 -- or real literal nodes, depending on whether a period is present.
1834 ----------------------------
1835 -- 2.5 Character Literal --
1836 ----------------------------
1838 -- CHARACTER_LITERAL ::= ' GRAPHIC_CHARACTER '
1840 -- N_Character_Literal
1841 -- Sloc points to literal
1842 -- Chars (Name1) contains the Name_Id for the identifier
1843 -- Char_Literal_Value (Uint2) contains the literal value
1844 -- Entity (Node4-Sem)
1845 -- Associated_Node (Node4-Sem)
1846 -- Has_Private_View (Flag11-Sem) set in generic units.
1847 -- plus fields for expression
1849 -- Note: the Entity field will be missing (set to Empty) for character
1850 -- literals whose type is Standard.Wide_Character or Standard.Character
1851 -- or a type derived from one of these two. In this case the character
1852 -- literal stands for its own coding. The reason we take this irregular
1853 -- short cut is to avoid the need to build lots of junk defining
1854 -- character literal nodes.
1856 -------------------------
1857 -- 2.6 String Literal --
1858 -------------------------
1860 -- STRING LITERAL ::= "{STRING_ELEMENT}"
1862 -- A STRING_ELEMENT is either a pair of quotation marks ("), or a
1863 -- single GRAPHIC_CHARACTER other than a quotation mark.
1865 -- Is_Folded_In_Parser is True if the parser created this literal by
1866 -- folding a sequence of "&" operators. For example, if the source code
1867 -- says "aaa" & "bbb" & "ccc", and this produces "aaabbbccc", the flag
1868 -- is set. This flag is needed because the parser doesn't know about
1869 -- visibility, so the folded result might be wrong, and semantic
1870 -- analysis needs to check for that.
1873 -- Sloc points to literal
1874 -- Strval (Str3) contains Id of string value
1875 -- Has_Wide_Character (Flag11-Sem)
1876 -- Is_Folded_In_Parser (Flag4)
1877 -- plus fields for expression
1883 -- A COMMENT starts with two adjacent hyphens and extends up to the
1884 -- end of the line. A COMMENT may appear on any line of a program.
1886 -- Comments are skipped by the scanner and do not appear in the tree.
1887 -- It is possible to reconstruct the position of comments with respect
1888 -- to the elements of the tree by using the source position (Sloc)
1889 -- pointers that appear in every tree node.
1895 -- PRAGMA ::= pragma IDENTIFIER
1896 -- [(PRAGMA_ARGUMENT_ASSOCIATION {, PRAGMA_ARGUMENT_ASSOCIATION})];
1898 -- Note that a pragma may appear in the tree anywhere a declaration
1899 -- or a statement may appear, as well as in some other situations
1900 -- which are explicitly documented.
1903 -- Sloc points to pragma identifier
1904 -- Next_Pragma (Node1-Sem)
1905 -- Pragma_Argument_Associations (List2) (set to No_List if none)
1906 -- Debug_Statement (Node3) (set to Empty if not Debug, Assert)
1907 -- Pragma_Identifier (Node4)
1908 -- Next_Rep_Item (Node5-Sem)
1909 -- PPC_Enabled (Flag5-Sem)
1911 -- Note: we should have a section on what pragmas are passed on to
1912 -- the back end to be processed. This section should note that pragma
1913 -- Psect_Object is always converted to Common_Object, but there are
1914 -- undoubtedly many other similar notes required ???
1916 -- Note: a utility function Pragma_Name may be applied to pragma nodes
1917 -- to conveniently obtain the Chars field of the Pragma_Identifier.
1919 --------------------------------------
1920 -- 2.8 Pragma Argument Association --
1921 --------------------------------------
1923 -- PRAGMA_ARGUMENT_ASSOCIATION ::=
1924 -- [pragma_argument_IDENTIFIER =>] NAME
1925 -- | [pragma_argument_IDENTIFIER =>] EXPRESSION
1927 -- N_Pragma_Argument_Association
1928 -- Sloc points to first token in association
1929 -- Chars (Name1) (set to No_Name if no pragma argument identifier)
1930 -- Expression (Node3)
1932 ------------------------
1933 -- 2.9 Reserved Word --
1934 ------------------------
1936 -- Reserved words are parsed by the scanner, and returned as the
1937 -- corresponding token types (e.g. PACKAGE is returned as Tok_Package)
1939 ----------------------------
1940 -- 3.1 Basic Declaration --
1941 ----------------------------
1943 -- BASIC_DECLARATION ::=
1944 -- TYPE_DECLARATION | SUBTYPE_DECLARATION
1945 -- | OBJECT_DECLARATION | NUMBER_DECLARATION
1946 -- | SUBPROGRAM_DECLARATION | ABSTRACT_SUBPROGRAM_DECLARATION
1947 -- | PACKAGE_DECLARATION | RENAMING_DECLARATION
1948 -- | EXCEPTION_DECLARATION | GENERIC_DECLARATION
1949 -- | GENERIC_INSTANTIATION
1951 -- Basic declaration also includes IMPLICIT_LABEL_DECLARATION
1952 -- see further description in section on semantic nodes.
1954 -- Also, in the tree that is constructed, a pragma may appear
1955 -- anywhere that a declaration may appear.
1957 ------------------------------
1958 -- 3.1 Defining Identifier --
1959 ------------------------------
1961 -- DEFINING_IDENTIFIER ::= IDENTIFIER
1963 -- A defining identifier is an entity, which has additional fields
1964 -- depending on the setting of the Ekind field. These additional
1965 -- fields are defined (and access subprograms declared) in package
1968 -- Note: N_Defining_Identifier is an extended node whose fields are
1969 -- deliberate layed out to match the layout of fields in an ordinary
1970 -- N_Identifier node allowing for easy alteration of an identifier
1971 -- node into a defining identifier node. For details, see procedure
1972 -- Sinfo.CN.Change_Identifier_To_Defining_Identifier.
1974 -- N_Defining_Identifier
1975 -- Sloc points to identifier
1976 -- Chars (Name1) contains the Name_Id for the identifier
1977 -- Next_Entity (Node2-Sem)
1978 -- Scope (Node3-Sem)
1979 -- Etype (Node5-Sem)
1981 -----------------------------
1982 -- 3.2.1 Type Declaration --
1983 -----------------------------
1985 -- TYPE_DECLARATION ::=
1986 -- FULL_TYPE_DECLARATION
1987 -- | INCOMPLETE_TYPE_DECLARATION
1988 -- | PRIVATE_TYPE_DECLARATION
1989 -- | PRIVATE_EXTENSION_DECLARATION
1991 ----------------------------------
1992 -- 3.2.1 Full Type Declaration --
1993 ----------------------------------
1995 -- FULL_TYPE_DECLARATION ::=
1996 -- type DEFINING_IDENTIFIER [KNOWN_DISCRIMINANT_PART]
1997 -- is TYPE_DEFINITION;
1998 -- | TASK_TYPE_DECLARATION
1999 -- | PROTECTED_TYPE_DECLARATION
2001 -- The full type declaration node is used only for the first case. The
2002 -- second case (concurrent type declaration), is represented directly
2003 -- by a task type declaration or a protected type declaration.
2005 -- N_Full_Type_Declaration
2006 -- Sloc points to TYPE
2007 -- Defining_Identifier (Node1)
2008 -- Discriminant_Specifications (List4) (set to No_List if none)
2009 -- Type_Definition (Node3)
2010 -- Discr_Check_Funcs_Built (Flag11-Sem)
2012 ----------------------------
2013 -- 3.2.1 Type Definition --
2014 ----------------------------
2016 -- TYPE_DEFINITION ::=
2017 -- ENUMERATION_TYPE_DEFINITION | INTEGER_TYPE_DEFINITION
2018 -- | REAL_TYPE_DEFINITION | ARRAY_TYPE_DEFINITION
2019 -- | RECORD_TYPE_DEFINITION | ACCESS_TYPE_DEFINITION
2020 -- | DERIVED_TYPE_DEFINITION | INTERFACE_TYPE_DEFINITION
2022 --------------------------------
2023 -- 3.2.2 Subtype Declaration --
2024 --------------------------------
2026 -- SUBTYPE_DECLARATION ::=
2027 -- subtype DEFINING_IDENTIFIER is [NULL_EXCLUSION] SUBTYPE_INDICATION;
2029 -- The subtype indication field is set to Empty for subtypes
2030 -- declared in package Standard (Positive, Natural).
2032 -- N_Subtype_Declaration
2033 -- Sloc points to SUBTYPE
2034 -- Defining_Identifier (Node1)
2035 -- Null_Exclusion_Present (Flag11)
2036 -- Subtype_Indication (Node5)
2037 -- Generic_Parent_Type (Node4-Sem) (set for an actual derived type).
2038 -- Exception_Junk (Flag8-Sem)
2040 -------------------------------
2041 -- 3.2.2 Subtype Indication --
2042 -------------------------------
2044 -- SUBTYPE_INDICATION ::= SUBTYPE_MARK [CONSTRAINT]
2046 -- Note: if no constraint is present, the subtype indication appears
2047 -- directly in the tree as a subtype mark. The N_Subtype_Indication
2048 -- node is used only if a constraint is present.
2050 -- Note: [For Ada 2005 (AI-231)]: Because Ada 2005 extends this rule
2051 -- with the null-exclusion part (see AI-231), we had to introduce a new
2052 -- attribute in all the parents of subtype_indication nodes to indicate
2053 -- if the null-exclusion is present.
2055 -- Note: the reason that this node has expression fields is that a
2056 -- subtype indication can appear as an operand of a membership test.
2058 -- N_Subtype_Indication
2059 -- Sloc points to first token of subtype mark
2060 -- Subtype_Mark (Node4)
2061 -- Constraint (Node3)
2062 -- Etype (Node5-Sem)
2063 -- Must_Not_Freeze (Flag8-Sem)
2065 -- Note: Etype is a copy of the Etype field of the Subtype_Mark. The
2066 -- reason for this redundancy is so that in a list of array index types,
2067 -- the Etype can be uniformly accessed to determine the subscript type.
2068 -- This means that no Itype is constructed for the actual subtype that
2069 -- is created by the subtype indication. If such an Itype is required,
2070 -- it is constructed in the context in which the indication appears.
2072 -------------------------
2073 -- 3.2.2 Subtype Mark --
2074 -------------------------
2076 -- SUBTYPE_MARK ::= subtype_NAME
2078 -----------------------
2079 -- 3.2.2 Constraint --
2080 -----------------------
2082 -- CONSTRAINT ::= SCALAR_CONSTRAINT | COMPOSITE_CONSTRAINT
2084 ------------------------------
2085 -- 3.2.2 Scalar Constraint --
2086 ------------------------------
2088 -- SCALAR_CONSTRAINT ::=
2089 -- RANGE_CONSTRAINT | DIGITS_CONSTRAINT | DELTA_CONSTRAINT
2091 ---------------------------------
2092 -- 3.2.2 Composite Constraint --
2093 ---------------------------------
2095 -- COMPOSITE_CONSTRAINT ::=
2096 -- INDEX_CONSTRAINT | DISCRIMINANT_CONSTRAINT
2098 -------------------------------
2099 -- 3.3.1 Object Declaration --
2100 -------------------------------
2102 -- OBJECT_DECLARATION ::=
2103 -- DEFINING_IDENTIFIER_LIST : [aliased] [constant]
2104 -- [NULL_EXCLUSION] SUBTYPE_INDICATION [:= EXPRESSION];
2105 -- | DEFINING_IDENTIFIER_LIST : [aliased] [constant]
2106 -- ACCESS_DEFINITION [:= EXPRESSION];
2107 -- | DEFINING_IDENTIFIER_LIST : [aliased] [constant]
2108 -- ARRAY_TYPE_DEFINITION [:= EXPRESSION];
2109 -- | SINGLE_TASK_DECLARATION
2110 -- | SINGLE_PROTECTED_DECLARATION
2112 -- Note: aliased is not permitted in Ada 83 mode
2114 -- The N_Object_Declaration node is only for the first two cases.
2115 -- Single task declaration is handled by P_Task (9.1)
2116 -- Single protected declaration is handled by P_protected (9.5)
2118 -- Although the syntax allows multiple identifiers in the list, the
2119 -- semantics is as though successive declarations were given with
2120 -- identical type definition and expression components. To simplify
2121 -- semantic processing, the parser represents a multiple declaration
2122 -- case as a sequence of single declarations, using the More_Ids and
2123 -- Prev_Ids flags to preserve the original source form as described
2124 -- in the section on "Handling of Defining Identifier Lists".
2126 -- The flag Has_Init_Expression is set if an initializing expression
2127 -- is present. Normally it is set if and only if Expression contains
2128 -- a non-empty value, but there is an exception to this. When the
2129 -- initializing expression is an aggregate which requires explicit
2130 -- assignments, the Expression field gets set to Empty, but this flag
2131 -- is still set, so we don't forget we had an initializing expression.
2133 -- Note: if a range check is required for the initialization
2134 -- expression then the Do_Range_Check flag is set in the Expression,
2135 -- with the check being done against the type given by the object
2136 -- definition, which is also the Etype of the defining identifier.
2138 -- Note: the contents of the Expression field must be ignored (i.e.
2139 -- treated as though it were Empty) if No_Initialization is set True.
2141 -- Note: the back end places some restrictions on the form of the
2142 -- Expression field. If the object being declared is Atomic, then
2143 -- the Expression may not have the form of an aggregate (since this
2144 -- might cause the back end to generate separate assignments). It
2145 -- also cannot be a reference to an object marked as a true constant
2146 -- (Is_True_Constant flag set), where the object is itself initialized
2147 -- with an aggregate. If necessary the front end must generate an
2148 -- extra temporary (with Is_True_Constant set False), and initialize
2149 -- this temporary as required (the temporary itself is not atomic).
2151 -- Note: there is not node kind for object definition. Instead, the
2152 -- corresponding field holds a subtype indication, an array type
2153 -- definition, or (Ada 2005, AI-406) an access definition.
2155 -- N_Object_Declaration
2156 -- Sloc points to first identifier
2157 -- Defining_Identifier (Node1)
2158 -- Aliased_Present (Flag4) set if ALIASED appears
2159 -- Constant_Present (Flag17) set if CONSTANT appears
2160 -- Null_Exclusion_Present (Flag11)
2161 -- Object_Definition (Node4) subtype indic./array type def./ access def.
2162 -- Expression (Node3) (set to Empty if not present)
2163 -- Handler_List_Entry (Node2-Sem)
2164 -- Corresponding_Generic_Association (Node5-Sem)
2165 -- More_Ids (Flag5) (set to False if no more identifiers in list)
2166 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
2167 -- No_Initialization (Flag13-Sem)
2168 -- Assignment_OK (Flag15-Sem)
2169 -- Exception_Junk (Flag8-Sem)
2170 -- Is_Subprogram_Descriptor (Flag16-Sem)
2171 -- Has_Init_Expression (Flag14)
2173 -------------------------------------
2174 -- 3.3.1 Defining Identifier List --
2175 -------------------------------------
2177 -- DEFINING_IDENTIFIER_LIST ::=
2178 -- DEFINING_IDENTIFIER {, DEFINING_IDENTIFIER}
2180 -------------------------------
2181 -- 3.3.2 Number Declaration --
2182 -------------------------------
2184 -- NUMBER_DECLARATION ::=
2185 -- DEFINING_IDENTIFIER_LIST : constant := static_EXPRESSION;
2187 -- Although the syntax allows multiple identifiers in the list, the
2188 -- semantics is as though successive declarations were given with
2189 -- identical expressions. To simplify semantic processing, the parser
2190 -- represents a multiple declaration case as a sequence of single
2191 -- declarations, using the More_Ids and Prev_Ids flags to preserve
2192 -- the original source form as described in the section on "Handling
2193 -- of Defining Identifier Lists".
2195 -- N_Number_Declaration
2196 -- Sloc points to first identifier
2197 -- Defining_Identifier (Node1)
2198 -- Expression (Node3)
2199 -- More_Ids (Flag5) (set to False if no more identifiers in list)
2200 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
2202 ----------------------------------
2203 -- 3.4 Derived Type Definition --
2204 ----------------------------------
2206 -- DERIVED_TYPE_DEFINITION ::=
2207 -- [abstract] [limited] new [NULL_EXCLUSION] parent_SUBTYPE_INDICATION
2208 -- [[and INTERFACE_LIST] RECORD_EXTENSION_PART]
2210 -- Note: ABSTRACT, LIMITED and record extension part are not permitted
2213 -- Note: a record extension part is required if ABSTRACT is present
2215 -- N_Derived_Type_Definition
2216 -- Sloc points to NEW
2217 -- Abstract_Present (Flag4)
2218 -- Null_Exclusion_Present (Flag11) (set to False if not present)
2219 -- Subtype_Indication (Node5)
2220 -- Record_Extension_Part (Node3) (set to Empty if not present)
2221 -- Limited_Present (Flag17)
2222 -- Task_Present (Flag5) set in task interfaces
2223 -- Protected_Present (Flag6) set in protected interfaces
2224 -- Synchronized_Present (Flag7) set in interfaces
2225 -- Interface_List (List2) (set to No_List if none)
2226 -- Interface_Present (Flag16) set in abstract interfaces
2228 -- Note: Task_Present, Protected_Present, Synchronized_Present,
2229 -- Interface_List, and Interface_Present are used for abstract
2230 -- interfaces (see comments for INTERFACE_TYPE_DEFINITION).
2232 ---------------------------
2233 -- 3.5 Range Constraint --
2234 ---------------------------
2236 -- RANGE_CONSTRAINT ::= range RANGE
2238 -- N_Range_Constraint
2239 -- Sloc points to RANGE
2240 -- Range_Expression (Node4)
2247 -- RANGE_ATTRIBUTE_REFERENCE
2248 -- | SIMPLE_EXPRESSION .. SIMPLE_EXPRESSION
2250 -- Note: the case of a range given as a range attribute reference
2251 -- appears directly in the tree as an attribute reference.
2253 -- Note: the field name for a reference to a range is Range_Expression
2254 -- rather than Range, because range is a reserved keyword in Ada!
2256 -- Note: the reason that this node has expression fields is that a
2257 -- range can appear as an operand of a membership test. The Etype
2258 -- field is the type of the range (we do NOT construct an implicit
2259 -- subtype to represent the range exactly).
2262 -- Sloc points to ..
2263 -- Low_Bound (Node1)
2264 -- High_Bound (Node2)
2265 -- Includes_Infinities (Flag11)
2266 -- plus fields for expression
2268 -- Note: if the range appears in a context, such as a subtype
2269 -- declaration, where range checks are required on one or both of
2270 -- the expression fields, then type conversion nodes are inserted
2271 -- to represent the required checks.
2273 ----------------------------------------
2274 -- 3.5.1 Enumeration Type Definition --
2275 ----------------------------------------
2277 -- ENUMERATION_TYPE_DEFINITION ::=
2278 -- (ENUMERATION_LITERAL_SPECIFICATION
2279 -- {, ENUMERATION_LITERAL_SPECIFICATION})
2281 -- Note: the Literals field in the node described below is null for
2282 -- the case of the standard types CHARACTER and WIDE_CHARACTER, for
2283 -- which special processing handles these types as special cases.
2285 -- N_Enumeration_Type_Definition
2286 -- Sloc points to left parenthesis
2287 -- Literals (List1) (Empty for CHARACTER or WIDE_CHARACTER)
2288 -- End_Label (Node4) (set to Empty if internally generated record)
2290 ----------------------------------------------
2291 -- 3.5.1 Enumeration Literal Specification --
2292 ----------------------------------------------
2294 -- ENUMERATION_LITERAL_SPECIFICATION ::=
2295 -- DEFINING_IDENTIFIER | DEFINING_CHARACTER_LITERAL
2297 ---------------------------------------
2298 -- 3.5.1 Defining Character Literal --
2299 ---------------------------------------
2301 -- DEFINING_CHARACTER_LITERAL ::= CHARACTER_LITERAL
2303 -- A defining character literal is an entity, which has additional
2304 -- fields depending on the setting of the Ekind field. These
2305 -- additional fields are defined (and access subprograms declared)
2306 -- in package Einfo.
2308 -- Note: N_Defining_Character_Literal is an extended node whose fields
2309 -- are deliberate layed out to match the layout of fields in an ordinary
2310 -- N_Character_Literal node allowing for easy alteration of a character
2311 -- literal node into a defining character literal node. For details, see
2312 -- Sinfo.CN.Change_Character_Literal_To_Defining_Character_Literal.
2314 -- N_Defining_Character_Literal
2315 -- Sloc points to literal
2316 -- Chars (Name1) contains the Name_Id for the identifier
2317 -- Next_Entity (Node2-Sem)
2318 -- Scope (Node3-Sem)
2319 -- Etype (Node5-Sem)
2321 ------------------------------------
2322 -- 3.5.4 Integer Type Definition --
2323 ------------------------------------
2325 -- Note: there is an error in this rule in the latest version of the
2326 -- grammar, so we have retained the old rule pending clarification.
2328 -- INTEGER_TYPE_DEFINITION ::=
2329 -- SIGNED_INTEGER_TYPE_DEFINITION
2330 -- | MODULAR_TYPE_DEFINITION
2332 -------------------------------------------
2333 -- 3.5.4 Signed Integer Type Definition --
2334 -------------------------------------------
2336 -- SIGNED_INTEGER_TYPE_DEFINITION ::=
2337 -- range static_SIMPLE_EXPRESSION .. static_SIMPLE_EXPRESSION
2339 -- Note: the Low_Bound and High_Bound fields are set to Empty
2340 -- for integer types defined in package Standard.
2342 -- N_Signed_Integer_Type_Definition
2343 -- Sloc points to RANGE
2344 -- Low_Bound (Node1)
2345 -- High_Bound (Node2)
2347 ------------------------------------
2348 -- 3.5.4 Modular Type Definition --
2349 ------------------------------------
2351 -- MODULAR_TYPE_DEFINITION ::= mod static_EXPRESSION
2353 -- N_Modular_Type_Definition
2354 -- Sloc points to MOD
2355 -- Expression (Node3)
2357 ---------------------------------
2358 -- 3.5.6 Real Type Definition --
2359 ---------------------------------
2361 -- REAL_TYPE_DEFINITION ::=
2362 -- FLOATING_POINT_DEFINITION | FIXED_POINT_DEFINITION
2364 --------------------------------------
2365 -- 3.5.7 Floating Point Definition --
2366 --------------------------------------
2368 -- FLOATING_POINT_DEFINITION ::=
2369 -- digits static_SIMPLE_EXPRESSION [REAL_RANGE_SPECIFICATION]
2371 -- Note: The Digits_Expression and Real_Range_Specifications fields
2372 -- are set to Empty for floating-point types declared in Standard.
2374 -- N_Floating_Point_Definition
2375 -- Sloc points to DIGITS
2376 -- Digits_Expression (Node2)
2377 -- Real_Range_Specification (Node4) (set to Empty if not present)
2379 -------------------------------------
2380 -- 3.5.7 Real Range Specification --
2381 -------------------------------------
2383 -- REAL_RANGE_SPECIFICATION ::=
2384 -- range static_SIMPLE_EXPRESSION .. static_SIMPLE_EXPRESSION
2386 -- N_Real_Range_Specification
2387 -- Sloc points to RANGE
2388 -- Low_Bound (Node1)
2389 -- High_Bound (Node2)
2391 -----------------------------------
2392 -- 3.5.9 Fixed Point Definition --
2393 -----------------------------------
2395 -- FIXED_POINT_DEFINITION ::=
2396 -- ORDINARY_FIXED_POINT_DEFINITION | DECIMAL_FIXED_POINT_DEFINITION
2398 --------------------------------------------
2399 -- 3.5.9 Ordinary Fixed Point Definition --
2400 --------------------------------------------
2402 -- ORDINARY_FIXED_POINT_DEFINITION ::=
2403 -- delta static_EXPRESSION REAL_RANGE_SPECIFICATION
2405 -- Note: In Ada 83, the EXPRESSION must be a SIMPLE_EXPRESSION
2407 -- N_Ordinary_Fixed_Point_Definition
2408 -- Sloc points to DELTA
2409 -- Delta_Expression (Node3)
2410 -- Real_Range_Specification (Node4)
2412 -------------------------------------------
2413 -- 3.5.9 Decimal Fixed Point Definition --
2414 -------------------------------------------
2416 -- DECIMAL_FIXED_POINT_DEFINITION ::=
2417 -- delta static_EXPRESSION
2418 -- digits static_EXPRESSION [REAL_RANGE_SPECIFICATION]
2420 -- Note: decimal types are not permitted in Ada 83 mode
2422 -- N_Decimal_Fixed_Point_Definition
2423 -- Sloc points to DELTA
2424 -- Delta_Expression (Node3)
2425 -- Digits_Expression (Node2)
2426 -- Real_Range_Specification (Node4) (set to Empty if not present)
2428 ------------------------------
2429 -- 3.5.9 Digits Constraint --
2430 ------------------------------
2432 -- DIGITS_CONSTRAINT ::=
2433 -- digits static_EXPRESSION [RANGE_CONSTRAINT]
2435 -- Note: in Ada 83, the EXPRESSION must be a SIMPLE_EXPRESSION
2436 -- Note: in Ada 95, reduced accuracy subtypes are obsolescent
2438 -- N_Digits_Constraint
2439 -- Sloc points to DIGITS
2440 -- Digits_Expression (Node2)
2441 -- Range_Constraint (Node4) (set to Empty if not present)
2443 --------------------------------
2444 -- 3.6 Array Type Definition --
2445 --------------------------------
2447 -- ARRAY_TYPE_DEFINITION ::=
2448 -- UNCONSTRAINED_ARRAY_DEFINITION | CONSTRAINED_ARRAY_DEFINITION
2450 -----------------------------------------
2451 -- 3.6 Unconstrained Array Definition --
2452 -----------------------------------------
2454 -- UNCONSTRAINED_ARRAY_DEFINITION ::=
2455 -- array (INDEX_SUBTYPE_DEFINITION {, INDEX_SUBTYPE_DEFINITION}) of
2456 -- COMPONENT_DEFINITION
2458 -- Note: dimensionality of array is indicated by number of entries in
2459 -- the Subtype_Marks list, which has one entry for each dimension.
2461 -- N_Unconstrained_Array_Definition
2462 -- Sloc points to ARRAY
2463 -- Subtype_Marks (List2)
2464 -- Component_Definition (Node4)
2466 -----------------------------------
2467 -- 3.6 Index Subtype Definition --
2468 -----------------------------------
2470 -- INDEX_SUBTYPE_DEFINITION ::= SUBTYPE_MARK range <>
2472 -- There is no explicit node in the tree for an index subtype
2473 -- definition since the N_Unconstrained_Array_Definition node
2474 -- incorporates the type marks which appear in this context.
2476 ---------------------------------------
2477 -- 3.6 Constrained Array Definition --
2478 ---------------------------------------
2480 -- CONSTRAINED_ARRAY_DEFINITION ::=
2481 -- array (DISCRETE_SUBTYPE_DEFINITION
2482 -- {, DISCRETE_SUBTYPE_DEFINITION})
2483 -- of COMPONENT_DEFINITION
2485 -- Note: dimensionality of array is indicated by number of entries
2486 -- in the Discrete_Subtype_Definitions list, which has one entry
2487 -- for each dimension.
2489 -- N_Constrained_Array_Definition
2490 -- Sloc points to ARRAY
2491 -- Discrete_Subtype_Definitions (List2)
2492 -- Component_Definition (Node4)
2494 --------------------------------------
2495 -- 3.6 Discrete Subtype Definition --
2496 --------------------------------------
2498 -- DISCRETE_SUBTYPE_DEFINITION ::=
2499 -- discrete_SUBTYPE_INDICATION | RANGE
2501 -------------------------------
2502 -- 3.6 Component Definition --
2503 -------------------------------
2505 -- COMPONENT_DEFINITION ::=
2506 -- [aliased] [NULL_EXCLUSION] SUBTYPE_INDICATION | ACCESS_DEFINITION
2508 -- Note: although the syntax does not permit a component definition to
2509 -- be an anonymous array (and the parser will diagnose such an attempt
2510 -- with an appropriate message), it is possible for anonymous arrays
2511 -- to appear as component definitions. The semantics and back end handle
2512 -- this case properly, and the expander in fact generates such cases.
2513 -- Access_Definition is an optional field that gives support to
2514 -- Ada 2005 (AI-230). The parser generates nodes that have either the
2515 -- Subtype_Indication field or else the Access_Definition field.
2517 -- N_Component_Definition
2518 -- Sloc points to ALIASED, ACCESS or to first token of subtype mark
2519 -- Aliased_Present (Flag4)
2520 -- Null_Exclusion_Present (Flag11)
2521 -- Subtype_Indication (Node5) (set to Empty if not present)
2522 -- Access_Definition (Node3) (set to Empty if not present)
2524 -----------------------------
2525 -- 3.6.1 Index Constraint --
2526 -----------------------------
2528 -- INDEX_CONSTRAINT ::= (DISCRETE_RANGE {, DISCRETE_RANGE})
2530 -- It is not in general possible to distinguish between discriminant
2531 -- constraints and index constraints at parse time, since a simple
2532 -- name could be either the subtype mark of a discrete range, or an
2533 -- expression in a discriminant association with no name. Either
2534 -- entry appears simply as the name, and the semantic parse must
2535 -- distinguish between the two cases. Thus we use a common tree
2536 -- node format for both of these constraint types.
2538 -- See Discriminant_Constraint for format of node
2540 ---------------------------
2541 -- 3.6.1 Discrete Range --
2542 ---------------------------
2544 -- DISCRETE_RANGE ::= discrete_SUBTYPE_INDICATION | RANGE
2546 ----------------------------
2547 -- 3.7 Discriminant Part --
2548 ----------------------------
2550 -- DISCRIMINANT_PART ::=
2551 -- UNKNOWN_DISCRIMINANT_PART | KNOWN_DISCRIMINANT_PART
2553 ------------------------------------
2554 -- 3.7 Unknown Discriminant Part --
2555 ------------------------------------
2557 -- UNKNOWN_DISCRIMINANT_PART ::= (<>)
2559 -- Note: unknown discriminant parts are not permitted in Ada 83 mode
2561 -- There is no explicit node in the tree for an unknown discriminant
2562 -- part. Instead the Unknown_Discriminants_Present flag is set in the
2565 ----------------------------------
2566 -- 3.7 Known Discriminant Part --
2567 ----------------------------------
2569 -- KNOWN_DISCRIMINANT_PART ::=
2570 -- (DISCRIMINANT_SPECIFICATION {; DISCRIMINANT_SPECIFICATION})
2572 -------------------------------------
2573 -- 3.7 Discriminant Specification --
2574 -------------------------------------
2576 -- DISCRIMINANT_SPECIFICATION ::=
2577 -- DEFINING_IDENTIFIER_LIST : [NULL_EXCLUSION] SUBTYPE_MARK
2578 -- [:= DEFAULT_EXPRESSION]
2579 -- | DEFINING_IDENTIFIER_LIST : ACCESS_DEFINITION
2580 -- [:= DEFAULT_EXPRESSION]
2582 -- Although the syntax allows multiple identifiers in the list, the
2583 -- semantics is as though successive specifications were given with
2584 -- identical type definition and expression components. To simplify
2585 -- semantic processing, the parser represents a multiple declaration
2586 -- case as a sequence of single specifications, using the More_Ids and
2587 -- Prev_Ids flags to preserve the original source form as described
2588 -- in the section on "Handling of Defining Identifier Lists".
2590 -- N_Discriminant_Specification
2591 -- Sloc points to first identifier
2592 -- Defining_Identifier (Node1)
2593 -- Null_Exclusion_Present (Flag11)
2594 -- Discriminant_Type (Node5) subtype mark or access parameter definition
2595 -- Expression (Node3) (set to Empty if no default expression)
2596 -- More_Ids (Flag5) (set to False if no more identifiers in list)
2597 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
2599 -----------------------------
2600 -- 3.7 Default Expression --
2601 -----------------------------
2603 -- DEFAULT_EXPRESSION ::= EXPRESSION
2605 ------------------------------------
2606 -- 3.7.1 Discriminant Constraint --
2607 ------------------------------------
2609 -- DISCRIMINANT_CONSTRAINT ::=
2610 -- (DISCRIMINANT_ASSOCIATION {, DISCRIMINANT_ASSOCIATION})
2612 -- It is not in general possible to distinguish between discriminant
2613 -- constraints and index constraints at parse time, since a simple
2614 -- name could be either the subtype mark of a discrete range, or an
2615 -- expression in a discriminant association with no name. Either
2616 -- entry appears simply as the name, and the semantic parse must
2617 -- distinguish between the two cases. Thus we use a common tree
2618 -- node format for both of these constraint types.
2620 -- N_Index_Or_Discriminant_Constraint
2621 -- Sloc points to left paren
2622 -- Constraints (List1) points to list of discrete ranges or
2623 -- discriminant associations
2625 -------------------------------------
2626 -- 3.7.1 Discriminant Association --
2627 -------------------------------------
2629 -- DISCRIMINANT_ASSOCIATION ::=
2630 -- [discriminant_SELECTOR_NAME
2631 -- {| discriminant_SELECTOR_NAME} =>] EXPRESSION
2633 -- Note: a discriminant association that has no selector name list
2634 -- appears directly as an expression in the tree.
2636 -- N_Discriminant_Association
2637 -- Sloc points to first token of discriminant association
2638 -- Selector_Names (List1) (always non-empty, since if no selector
2639 -- names are present, this node is not used, see comment above)
2640 -- Expression (Node3)
2642 ---------------------------------
2643 -- 3.8 Record Type Definition --
2644 ---------------------------------
2646 -- RECORD_TYPE_DEFINITION ::=
2647 -- [[abstract] tagged] [limited] RECORD_DEFINITION
2649 -- Note: ABSTRACT, TAGGED, LIMITED are not permitted in Ada 83 mode
2651 -- There is no explicit node in the tree for a record type definition.
2652 -- Instead the flags for Tagged_Present and Limited_Present appear in
2653 -- the N_Record_Definition node for a record definition appearing in
2654 -- the context of a record type definition.
2656 ----------------------------
2657 -- 3.8 Record Definition --
2658 ----------------------------
2660 -- RECORD_DEFINITION ::=
2666 -- Note: the Abstract_Present, Tagged_Present and Limited_Present
2667 -- flags appear only for a record definition appearing in a record
2670 -- Note: the NULL RECORD case is not permitted in Ada 83
2672 -- N_Record_Definition
2673 -- Sloc points to RECORD or NULL
2674 -- End_Label (Node4) (set to Empty if internally generated record)
2675 -- Abstract_Present (Flag4)
2676 -- Tagged_Present (Flag15)
2677 -- Limited_Present (Flag17)
2678 -- Component_List (Node1) empty in null record case
2679 -- Null_Present (Flag13) set in null record case
2680 -- Task_Present (Flag5) set in task interfaces
2681 -- Protected_Present (Flag6) set in protected interfaces
2682 -- Synchronized_Present (Flag7) set in interfaces
2683 -- Interface_Present (Flag16) set in abstract interfaces
2684 -- Interface_List (List2) (set to No_List if none)
2686 -- Note: Task_Present, Protected_Present, Synchronized _Present,
2687 -- Interface_List and Interface_Present are used for abstract
2688 -- interfaces (see comments for INTERFACE_TYPE_DEFINITION).
2690 -------------------------
2691 -- 3.8 Component List --
2692 -------------------------
2694 -- COMPONENT_LIST ::=
2695 -- COMPONENT_ITEM {COMPONENT_ITEM}
2696 -- | {COMPONENT_ITEM} VARIANT_PART
2700 -- Sloc points to first token of component list
2701 -- Component_Items (List3)
2702 -- Variant_Part (Node4) (set to Empty if no variant part)
2703 -- Null_Present (Flag13)
2705 -------------------------
2706 -- 3.8 Component Item --
2707 -------------------------
2709 -- COMPONENT_ITEM ::= COMPONENT_DECLARATION | REPRESENTATION_CLAUSE
2711 -- Note: A component item can also be a pragma, and in the tree
2712 -- that is obtained after semantic processing, a component item
2713 -- can be an N_Null node resulting from a non-recognized pragma.
2715 --------------------------------
2716 -- 3.8 Component Declaration --
2717 --------------------------------
2719 -- COMPONENT_DECLARATION ::=
2720 -- DEFINING_IDENTIFIER_LIST : COMPONENT_DEFINITION
2721 -- [:= DEFAULT_EXPRESSION]
2723 -- Note: although the syntax does not permit a component definition to
2724 -- be an anonymous array (and the parser will diagnose such an attempt
2725 -- with an appropriate message), it is possible for anonymous arrays
2726 -- to appear as component definitions. The semantics and back end handle
2727 -- this case properly, and the expander in fact generates such cases.
2729 -- Although the syntax allows multiple identifiers in the list, the
2730 -- semantics is as though successive declarations were given with the
2731 -- same component definition and expression components. To simplify
2732 -- semantic processing, the parser represents a multiple declaration
2733 -- case as a sequence of single declarations, using the More_Ids and
2734 -- Prev_Ids flags to preserve the original source form as described
2735 -- in the section on "Handling of Defining Identifier Lists".
2737 -- N_Component_Declaration
2738 -- Sloc points to first identifier
2739 -- Defining_Identifier (Node1)
2740 -- Component_Definition (Node4)
2741 -- Expression (Node3) (set to Empty if no default expression)
2742 -- More_Ids (Flag5) (set to False if no more identifiers in list)
2743 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
2745 -------------------------
2746 -- 3.8.1 Variant Part --
2747 -------------------------
2750 -- case discriminant_DIRECT_NAME is
2755 -- Note: the variants list can contain pragmas as well as variants.
2756 -- In a properly formed program there is at least one variant.
2759 -- Sloc points to CASE
2763 --------------------
2765 --------------------
2768 -- when DISCRETE_CHOICE_LIST =>
2772 -- Sloc points to WHEN
2773 -- Discrete_Choices (List4)
2774 -- Component_List (Node1)
2775 -- Enclosing_Variant (Node2-Sem)
2776 -- Present_Expr (Uint3-Sem)
2777 -- Dcheck_Function (Node5-Sem)
2779 ---------------------------------
2780 -- 3.8.1 Discrete Choice List --
2781 ---------------------------------
2783 -- DISCRETE_CHOICE_LIST ::= DISCRETE_CHOICE {| DISCRETE_CHOICE}
2785 ----------------------------
2786 -- 3.8.1 Discrete Choice --
2787 ----------------------------
2789 -- DISCRETE_CHOICE ::= EXPRESSION | DISCRETE_RANGE | others
2791 -- Note: in Ada 83 mode, the expression must be a simple expression
2793 -- The only choice that appears explicitly is the OTHERS choice, as
2794 -- defined here. Other cases of discrete choice (expression and
2795 -- discrete range) appear directly. This production is also used
2796 -- for the OTHERS possibility of an exception choice.
2798 -- Note: in accordance with the syntax, the parser does not check that
2799 -- OTHERS appears at the end on its own in a choice list context. This
2800 -- is a semantic check.
2803 -- Sloc points to OTHERS
2804 -- Others_Discrete_Choices (List1-Sem)
2805 -- All_Others (Flag11-Sem)
2807 ----------------------------------
2808 -- 3.9.1 Record Extension Part --
2809 ----------------------------------
2811 -- RECORD_EXTENSION_PART ::= with RECORD_DEFINITION
2813 -- Note: record extension parts are not permitted in Ada 83 mode
2815 --------------------------------------
2816 -- 3.9.4 Interface Type Definition --
2817 --------------------------------------
2819 -- INTERFACE_TYPE_DEFINITION ::=
2820 -- [limited | task | protected | synchronized]
2821 -- interface [interface_list]
2823 -- Note: Interfaces are implemented with N_Record_Definition and
2824 -- N_Derived_Type_Definition nodes because most of the support
2825 -- for the analysis of abstract types has been reused to
2826 -- analyze abstract interfaces.
2828 ----------------------------------
2829 -- 3.10 Access Type Definition --
2830 ----------------------------------
2832 -- ACCESS_TYPE_DEFINITION ::=
2833 -- ACCESS_TO_OBJECT_DEFINITION
2834 -- | ACCESS_TO_SUBPROGRAM_DEFINITION
2836 --------------------------
2837 -- 3.10 Null Exclusion --
2838 --------------------------
2840 -- NULL_EXCLUSION ::= not null
2842 ---------------------------------------
2843 -- 3.10 Access To Object Definition --
2844 ---------------------------------------
2846 -- ACCESS_TO_OBJECT_DEFINITION ::=
2847 -- [NULL_EXCLUSION] access [GENERAL_ACCESS_MODIFIER]
2848 -- SUBTYPE_INDICATION
2850 -- N_Access_To_Object_Definition
2851 -- Sloc points to ACCESS
2852 -- All_Present (Flag15)
2853 -- Null_Exclusion_Present (Flag11)
2854 -- Subtype_Indication (Node5)
2855 -- Constant_Present (Flag17)
2857 -----------------------------------
2858 -- 3.10 General Access Modifier --
2859 -----------------------------------
2861 -- GENERAL_ACCESS_MODIFIER ::= all | constant
2863 -- Note: general access modifiers are not permitted in Ada 83 mode
2865 -- There is no explicit node in the tree for general access modifier.
2866 -- Instead the All_Present or Constant_Present flags are set in the
2869 -------------------------------------------
2870 -- 3.10 Access To Subprogram Definition --
2871 -------------------------------------------
2873 -- ACCESS_TO_SUBPROGRAM_DEFINITION
2874 -- [NULL_EXCLUSION] access [protected] procedure PARAMETER_PROFILE
2875 -- | [NULL_EXCLUSION] access [protected] function
2876 -- PARAMETER_AND_RESULT_PROFILE
2878 -- Note: access to subprograms are not permitted in Ada 83 mode
2880 -- N_Access_Function_Definition
2881 -- Sloc points to ACCESS
2882 -- Null_Exclusion_Present (Flag11)
2883 -- Protected_Present (Flag6)
2884 -- Parameter_Specifications (List3) (set to No_List if no formal part)
2885 -- Result_Definition (Node4) result subtype (subtype mark or access def)
2887 -- N_Access_Procedure_Definition
2888 -- Sloc points to ACCESS
2889 -- Null_Exclusion_Present (Flag11)
2890 -- Protected_Present (Flag6)
2891 -- Parameter_Specifications (List3) (set to No_List if no formal part)
2893 -----------------------------
2894 -- 3.10 Access Definition --
2895 -----------------------------
2897 -- ACCESS_DEFINITION ::=
2898 -- [NULL_EXCLUSION] access [GENERAL_ACCESS_MODIFIER] SUBTYPE_MARK
2899 -- | ACCESS_TO_SUBPROGRAM_DEFINITION
2901 -- Note: access to subprograms are an Ada 2005 (AI-254) extension
2903 -- N_Access_Definition
2904 -- Sloc points to ACCESS
2905 -- Null_Exclusion_Present (Flag11)
2906 -- All_Present (Flag15)
2907 -- Constant_Present (Flag17)
2908 -- Subtype_Mark (Node4)
2909 -- Access_To_Subprogram_Definition (Node3) (set to Empty if not present)
2911 -----------------------------------------
2912 -- 3.10.1 Incomplete Type Declaration --
2913 -----------------------------------------
2915 -- INCOMPLETE_TYPE_DECLARATION ::=
2916 -- type DEFINING_IDENTIFIER [DISCRIMINANT_PART] [IS TAGGED];
2918 -- N_Incomplete_Type_Declaration
2919 -- Sloc points to TYPE
2920 -- Defining_Identifier (Node1)
2921 -- Discriminant_Specifications (List4) (set to No_List if no
2922 -- discriminant part, or if the discriminant part is an
2923 -- unknown discriminant part)
2924 -- Unknown_Discriminants_Present (Flag13) set if (<>) discriminant
2925 -- Tagged_Present (Flag15)
2927 ----------------------------
2928 -- 3.11 Declarative Part --
2929 ----------------------------
2931 -- DECLARATIVE_PART ::= {DECLARATIVE_ITEM}
2933 -- Note: although the parser enforces the syntactic requirement that
2934 -- a declarative part can contain only declarations, the semantic
2935 -- processing may add statements to the list of actions in a
2936 -- declarative part, so the code generator should be prepared
2937 -- to accept a statement in this position.
2939 ----------------------------
2940 -- 3.11 Declarative Item --
2941 ----------------------------
2943 -- DECLARATIVE_ITEM ::= BASIC_DECLARATIVE_ITEM | BODY
2945 ----------------------------------
2946 -- 3.11 Basic Declarative Item --
2947 ----------------------------------
2949 -- BASIC_DECLARATIVE_ITEM ::=
2950 -- BASIC_DECLARATION | REPRESENTATION_CLAUSE | USE_CLAUSE
2956 -- BODY ::= PROPER_BODY | BODY_STUB
2958 -----------------------
2959 -- 3.11 Proper Body --
2960 -----------------------
2963 -- SUBPROGRAM_BODY | PACKAGE_BODY | TASK_BODY | PROTECTED_BODY
2970 -- DIRECT_NAME | EXPLICIT_DEREFERENCE
2971 -- | INDEXED_COMPONENT | SLICE
2972 -- | SELECTED_COMPONENT | ATTRIBUTE_REFERENCE
2973 -- | TYPE_CONVERSION | FUNCTION_CALL
2974 -- | CHARACTER_LITERAL
2976 ----------------------
2977 -- 4.1 Direct Name --
2978 ----------------------
2980 -- DIRECT_NAME ::= IDENTIFIER | OPERATOR_SYMBOL
2986 -- PREFIX ::= NAME | IMPLICIT_DEREFERENCE
2988 -------------------------------
2989 -- 4.1 Explicit Dereference --
2990 -------------------------------
2992 -- EXPLICIT_DEREFERENCE ::= NAME . all
2994 -- N_Explicit_Dereference
2995 -- Sloc points to ALL
2997 -- Actual_Designated_Subtype (Node4-Sem)
2998 -- plus fields for expression
3000 -------------------------------
3001 -- 4.1 Implicit Dereference --
3002 -------------------------------
3004 -- IMPLICIT_DEREFERENCE ::= NAME
3006 ------------------------------
3007 -- 4.1.1 Indexed Component --
3008 ------------------------------
3010 -- INDEXED_COMPONENT ::= PREFIX (EXPRESSION {, EXPRESSION})
3012 -- Note: the parser may generate this node in some situations where it
3013 -- should be a function call. The semantic pass must correct this
3014 -- misidentification (which is inevitable at the parser level).
3016 -- N_Indexed_Component
3017 -- Sloc contains a copy of the Sloc value of the Prefix
3019 -- Expressions (List1)
3020 -- plus fields for expression
3022 -- Note: if any of the subscripts requires a range check, then the
3023 -- Do_Range_Check flag is set on the corresponding expression, with
3024 -- the index type being determined from the type of the Prefix, which
3025 -- references the array being indexed.
3027 -- Note: in a fully analyzed and expanded indexed component node, and
3028 -- hence in any such node that gigi sees, if the prefix is an access
3029 -- type, then an explicit dereference operation has been inserted.
3035 -- SLICE ::= PREFIX (DISCRETE_RANGE)
3037 -- Note: an implicit subtype is created to describe the resulting
3038 -- type, so that the bounds of this type are the bounds of the slice.
3041 -- Sloc points to first token of prefix
3043 -- Discrete_Range (Node4)
3044 -- plus fields for expression
3046 -------------------------------
3047 -- 4.1.3 Selected Component --
3048 -------------------------------
3050 -- SELECTED_COMPONENT ::= PREFIX . SELECTOR_NAME
3052 -- Note: selected components that are semantically expanded names get
3053 -- changed during semantic processing into the separate N_Expanded_Name
3054 -- node. See description of this node in the section on semantic nodes.
3056 -- N_Selected_Component
3057 -- Sloc points to period
3059 -- Selector_Name (Node2)
3060 -- Associated_Node (Node4-Sem)
3061 -- Do_Discriminant_Check (Flag13-Sem)
3062 -- Is_In_Discriminant_Check (Flag11-Sem)
3063 -- plus fields for expression
3065 --------------------------
3066 -- 4.1.3 Selector Name --
3067 --------------------------
3069 -- SELECTOR_NAME ::= IDENTIFIER | CHARACTER_LITERAL | OPERATOR_SYMBOL
3071 --------------------------------
3072 -- 4.1.4 Attribute Reference --
3073 --------------------------------
3075 -- ATTRIBUTE_REFERENCE ::= PREFIX ' ATTRIBUTE_DESIGNATOR
3077 -- Note: the syntax is quite ambiguous at this point. Consider:
3079 -- A'Length (X) X is part of the attribute designator
3080 -- A'Pos (X) X is an explicit actual parameter of function A'Pos
3081 -- A'Class (X) X is the expression of a type conversion
3083 -- It would be possible for the parser to distinguish these cases
3084 -- by looking at the attribute identifier. However, that would mean
3085 -- more work in introducing new implementation defined attributes,
3086 -- and also it would mean that special processing for attributes
3087 -- would be scattered around, instead of being centralized in the
3088 -- semantic routine that handles an N_Attribute_Reference node.
3089 -- Consequently, the parser in all the above cases stores the
3090 -- expression (X in these examples) as a single element list in
3091 -- in the Expressions field of the N_Attribute_Reference node.
3093 -- Similarly, for attributes like Max which take two arguments,
3094 -- we store the two arguments as a two element list in the
3095 -- Expressions field. Of course it is clear at parse time that
3096 -- this case is really a function call with an attribute as the
3097 -- prefix, but it turns out to be convenient to handle the two
3098 -- argument case in a similar manner to the one argument case,
3099 -- and indeed in general the parser will accept any number of
3100 -- expressions in this position and store them as a list in the
3101 -- attribute reference node. This allows for future addition of
3102 -- attributes that take more than two arguments.
3104 -- Note: named associates are not permitted in function calls where
3105 -- the function is an attribute (see RM 6.4(3)) so it is legitimate
3106 -- to skip the normal subprogram argument processing.
3108 -- Note: for the attributes whose designators are technically keywords,
3109 -- i.e. digits, access, delta, range, the Attribute_Name field contains
3110 -- the corresponding name, even though no identifier is involved.
3112 -- Note: the generated code may contain stream attributes applied to
3113 -- limited types for which no stream routines exist officially. In such
3114 -- case, the result is to use the stream attribute for the underlying
3115 -- full type, or in the case of a protected type, the components
3116 -- (including any discriminants) are merely streamed in order.
3118 -- See Exp_Attr for a complete description of which attributes are
3119 -- passed onto Gigi, and which are handled entirely by the front end.
3121 -- Gigi restriction: For the Pos attribute, the prefix cannot be
3122 -- a non-standard enumeration type or a nonzero/zero semantics
3123 -- boolean type, so the value is simply the stored representation.
3125 -- Gigi requirement: For the Mechanism_Code attribute, if the prefix
3126 -- references a subprogram that is a renaming, then the front end must
3127 -- rewrite the attribute to refer directly to the renamed entity.
3129 -- Note: In generated code, the Address and Unrestricted_Access
3130 -- attributes can be applied to any expression, and the meaning is
3131 -- to create an object containing the value (the object is in the
3132 -- current stack frame), and pass the address of this value. If the
3133 -- Must_Be_Byte_Aligned flag is set, then the object whose address
3134 -- is taken must be on a byte (storage unit) boundary, and if it is
3135 -- not (or may not be), then the generated code must create a copy
3136 -- that is byte aligned, and pass the address of this copy.
3138 -- N_Attribute_Reference
3139 -- Sloc points to apostrophe
3141 -- Attribute_Name (Name2) identifier name from attribute designator
3142 -- Expressions (List1) (set to No_List if no associated expressions)
3143 -- Entity (Node4-Sem) used if the attribute yields a type
3144 -- Associated_Node (Node4-Sem)
3145 -- Do_Overflow_Check (Flag17-Sem)
3146 -- Redundant_Use (Flag13-Sem)
3147 -- Must_Be_Byte_Aligned (Flag14)
3148 -- plus fields for expression
3150 ---------------------------------
3151 -- 4.1.4 Attribute Designator --
3152 ---------------------------------
3154 -- ATTRIBUTE_DESIGNATOR ::=
3155 -- IDENTIFIER [(static_EXPRESSION)]
3156 -- | access | delta | digits
3158 -- There is no explicit node in the tree for an attribute designator.
3159 -- Instead the Attribute_Name and Expressions fields of the parent
3160 -- node (N_Attribute_Reference node) hold the information.
3162 -- Note: if ACCESS, DELTA or DIGITS appears in an attribute
3163 -- designator, then they are treated as identifiers internally
3164 -- rather than the keywords of the same name.
3166 --------------------------------------
3167 -- 4.1.4 Range Attribute Reference --
3168 --------------------------------------
3170 -- RANGE_ATTRIBUTE_REFERENCE ::= PREFIX ' RANGE_ATTRIBUTE_DESIGNATOR
3172 -- A range attribute reference is represented in the tree using the
3173 -- normal N_Attribute_Reference node.
3175 ---------------------------------------
3176 -- 4.1.4 Range Attribute Designator --
3177 ---------------------------------------
3179 -- RANGE_ATTRIBUTE_DESIGNATOR ::= Range [(static_EXPRESSION)]
3181 -- A range attribute designator is represented in the tree using the
3182 -- normal N_Attribute_Reference node.
3184 --------------------
3186 --------------------
3189 -- RECORD_AGGREGATE | EXTENSION_AGGREGATE | ARRAY_AGGREGATE
3191 -----------------------------
3192 -- 4.3.1 Record Aggregate --
3193 -----------------------------
3195 -- RECORD_AGGREGATE ::= (RECORD_COMPONENT_ASSOCIATION_LIST)
3198 -- Sloc points to left parenthesis
3199 -- Expressions (List1) (set to No_List if none or null record case)
3200 -- Component_Associations (List2) (set to No_List if none)
3201 -- Null_Record_Present (Flag17)
3202 -- Aggregate_Bounds (Node3-Sem)
3203 -- Associated_Node (Node4-Sem)
3204 -- Static_Processing_OK (Flag4-Sem)
3205 -- Compile_Time_Known_Aggregate (Flag18-Sem)
3206 -- Expansion_Delayed (Flag11-Sem)
3207 -- Has_Self_Reference (Flag13-Sem)
3208 -- plus fields for expression
3210 -- Note: this structure is used for both record and array aggregates
3211 -- since the two cases are not separable by the parser. The parser
3212 -- makes no attempt to enforce consistency here, so it is up to the
3213 -- semantic phase to make sure that the aggregate is consistent (i.e.
3214 -- that it is not a "half-and-half" case that mixes record and array
3215 -- syntax. In particular, for a record aggregate, the expressions
3216 -- field will be set if there are positional associations.
3218 -- Note: N_Aggregate is not used for all aggregates; in particular,
3219 -- there is a separate node kind for extension aggregates.
3221 -- Note: gigi/gcc can handle array aggregates correctly providing that
3222 -- they are entirely positional, and the array subtype involved has a
3223 -- known at compile time length and is not bit packed, or a convention
3224 -- Fortran array with more than one dimension. If these conditions
3225 -- are not met, then the front end must translate the aggregate into
3226 -- an appropriate set of assignments into a temporary.
3228 -- Note: for the record aggregate case, gigi/gcc can handle all cases
3229 -- of record aggregates, including those for packed, and rep-claused
3230 -- records, and also variant records, providing that there are no
3231 -- variable length fields whose size is not known at runtime, and
3232 -- providing that the aggregate is presented in fully named form.
3234 ----------------------------------------------
3235 -- 4.3.1 Record Component Association List --
3236 ----------------------------------------------
3238 -- RECORD_COMPONENT_ASSOCIATION_LIST ::=
3239 -- RECORD_COMPONENT_ASSOCIATION {, RECORD_COMPONENT_ASSOCIATION}
3242 -- There is no explicit node in the tree for a record component
3243 -- association list. Instead the Null_Record_Present flag is set in
3244 -- the parent node for the NULL RECORD case.
3246 ------------------------------------------------------
3247 -- 4.3.1 Record Component Association (also 4.3.3) --
3248 ------------------------------------------------------
3250 -- RECORD_COMPONENT_ASSOCIATION ::=
3251 -- [COMPONENT_CHOICE_LIST =>] EXPRESSION
3253 -- N_Component_Association
3254 -- Sloc points to first selector name
3256 -- Loop_Actions (List2-Sem)
3257 -- Expression (Node3)
3258 -- Box_Present (Flag15)
3260 -- Note: this structure is used for both record component associations
3261 -- and array component associations, since the two cases aren't always
3262 -- separable by the parser. The choices list may represent either a
3263 -- list of selector names in the record aggregate case, or a list of
3264 -- discrete choices in the array aggregate case or an N_Others_Choice
3265 -- node (which appears as a singleton list). Box_Present gives support
3266 -- to Ada 2005 (AI-287).
3268 ----------------------------------
3269 -- 4.3.1 Cmmponent Choice List --
3270 ----------------------------------
3272 -- COMPONENT_CHOICE_LIST ::=
3273 -- component_SELECTOR_NAME {| component_SELECTOR_NAME}
3276 -- The entries of a component choice list appear in the Choices list of
3277 -- the associated N_Component_Association, as either selector names, or
3278 -- as an N_Others_Choice node.
3280 --------------------------------
3281 -- 4.3.2 Extension Aggregate --
3282 --------------------------------
3284 -- EXTENSION_AGGREGATE ::=
3285 -- (ANCESTOR_PART with RECORD_COMPONENT_ASSOCIATION_LIST)
3287 -- Note: extension aggregates are not permitted in Ada 83 mode
3289 -- N_Extension_Aggregate
3290 -- Sloc points to left parenthesis
3291 -- Ancestor_Part (Node3)
3292 -- Associated_Node (Node4-Sem)
3293 -- Expressions (List1) (set to No_List if none or null record case)
3294 -- Component_Associations (List2) (set to No_List if none)
3295 -- Null_Record_Present (Flag17)
3296 -- Expansion_Delayed (Flag11-Sem)
3297 -- Has_Self_Reference (Flag13-Sem)
3298 -- plus fields for expression
3300 --------------------------
3301 -- 4.3.2 Ancestor Part --
3302 --------------------------
3304 -- ANCESTOR_PART ::= EXPRESSION | SUBTYPE_MARK
3306 ----------------------------
3307 -- 4.3.3 Array Aggregate --
3308 ----------------------------
3310 -- ARRAY_AGGREGATE ::=
3311 -- POSITIONAL_ARRAY_AGGREGATE | NAMED_ARRAY_AGGREGATE
3313 ---------------------------------------
3314 -- 4.3.3 Positional Array Aggregate --
3315 ---------------------------------------
3317 -- POSITIONAL_ARRAY_AGGREGATE ::=
3318 -- (EXPRESSION, EXPRESSION {, EXPRESSION})
3319 -- | (EXPRESSION {, EXPRESSION}, others => EXPRESSION)
3321 -- See Record_Aggregate (4.3.1) for node structure
3323 ----------------------------------
3324 -- 4.3.3 Named Array Aggregate --
3325 ----------------------------------
3327 -- NAMED_ARRAY_AGGREGATE ::=
3328 -- | (ARRAY_COMPONENT_ASSOCIATION {, ARRAY_COMPONENT_ASSOCIATION})
3330 -- See Record_Aggregate (4.3.1) for node structure
3332 ----------------------------------------
3333 -- 4.3.3 Array Component Association --
3334 ----------------------------------------
3336 -- ARRAY_COMPONENT_ASSOCIATION ::=
3337 -- DISCRETE_CHOICE_LIST => EXPRESSION
3339 -- See Record_Component_Association (4.3.1) for node structure
3341 --------------------------------------------------
3342 -- 4.4 Expression/Relation/Term/Factor/Primary --
3343 --------------------------------------------------
3346 -- RELATION {and RELATION} | RELATION {and then RELATION}
3347 -- | RELATION {or RELATION} | RELATION {or else RELATION}
3348 -- | RELATION {xor RELATION}
3351 -- SIMPLE_EXPRESSION [RELATIONAL_OPERATOR SIMPLE_EXPRESSION]
3352 -- | SIMPLE_EXPRESSION [not] in RANGE
3353 -- | SIMPLE_EXPRESSION [not] in SUBTYPE_MARK
3355 -- SIMPLE_EXPRESSION ::=
3356 -- [UNARY_ADDING_OPERATOR] TERM {BINARY_ADDING_OPERATOR TERM}
3358 -- TERM ::= FACTOR {MULTIPLYING_OPERATOR FACTOR}
3360 -- FACTOR ::= PRIMARY [** PRIMARY] | abs PRIMARY | not PRIMARY
3362 -- No nodes are generated for any of these constructs. Instead, the
3363 -- node for the operator appears directly. When we refer to an
3364 -- expression in this description, we mean any of the possible
3365 -- constituent components of an expression (e.g. identifier is
3366 -- an example of an expression).
3373 -- NUMERIC_LITERAL | null
3374 -- | STRING_LITERAL | AGGREGATE
3375 -- | NAME | QUALIFIED_EXPRESSION
3376 -- | ALLOCATOR | (EXPRESSION)
3378 -- Usually there is no explicit node in the tree for primary. Instead
3379 -- the constituent (e.g. AGGREGATE) appears directly. There are two
3380 -- exceptions. First, there is an explicit node for a null primary.
3383 -- Sloc points to NULL
3384 -- plus fields for expression
3386 -- Second, the case of (EXPRESSION) is handled specially. Ada requires
3387 -- that the parser keep track of which subexpressions are enclosed
3388 -- in parentheses, and how many levels of parentheses are used. This
3389 -- information is required for optimization purposes, and also for
3390 -- some semantic checks (e.g. (((1))) in a procedure spec does not
3391 -- conform with ((((1)))) in the body).
3393 -- The parentheses are recorded by keeping a Paren_Count field in every
3394 -- subexpression node (it is actually present in all nodes, but only
3395 -- used in subexpression nodes). This count records the number of
3396 -- levels of parentheses. If the number of levels in the source exceeds
3397 -- the maximum accommodated by this count, then the count is simply left
3398 -- at the maximum value. This means that there are some pathological
3399 -- cases of failure to detect conformance failures (e.g. an expression
3400 -- with 500 levels of parens will conform with one with 501 levels),
3401 -- but we do not need to lose sleep over this.
3403 -- Historical note: in versions of GNAT prior to 1.75, there was a node
3404 -- type N_Parenthesized_Expression used to accurately record unlimited
3405 -- numbers of levels of parentheses. However, it turned out to be a
3406 -- real nuisance to have to take into account the possible presence of
3407 -- this node during semantic analysis, since basically parentheses have
3408 -- zero relevance to semantic analysis.
3410 -- Note: the level of parentheses always present in things like
3411 -- aggregates does not count, only the parentheses in the primary
3412 -- (EXPRESSION) affect the setting of the Paren_Count field.
3414 -- 2nd Note: the contents of the Expression field must be ignored (i.e.
3415 -- treated as though it were Empty) if No_Initialization is set True.
3417 --------------------------------------
3418 -- 4.5 Short Circuit Control Forms --
3419 --------------------------------------
3422 -- RELATION {and then RELATION} | RELATION {or else RELATION}
3424 -- Gigi restriction: For both these control forms, the operand and
3425 -- result types are always Standard.Boolean. The expander inserts the
3426 -- required conversion operations where needed to ensure this is the
3430 -- Sloc points to AND of AND THEN
3431 -- Left_Opnd (Node2)
3432 -- Right_Opnd (Node3)
3433 -- Actions (List1-Sem)
3434 -- plus fields for expression
3437 -- Sloc points to OR of OR ELSE
3438 -- Left_Opnd (Node2)
3439 -- Right_Opnd (Node3)
3440 -- Actions (List1-Sem)
3441 -- plus fields for expression
3443 -- Note: The Actions field is used to hold actions associated with
3444 -- the right hand operand. These have to be treated specially since
3445 -- they are not unconditionally executed. See Insert_Actions for a
3446 -- more detailed description of how these actions are handled.
3448 ---------------------------
3449 -- 4.5 Membership Tests --
3450 ---------------------------
3453 -- SIMPLE_EXPRESSION [not] in RANGE
3454 -- | SIMPLE_EXPRESSION [not] in SUBTYPE_MARK
3456 -- Note: although the grammar above allows only a range or a
3457 -- subtype mark, the parser in fact will accept any simple
3458 -- expression in place of a subtype mark. This means that the
3459 -- semantic analyzer must be prepared to deal with, and diagnose
3460 -- a simple expression other than a name for the right operand.
3461 -- This simplifies error recovery in the parser.
3464 -- Sloc points to IN
3465 -- Left_Opnd (Node2)
3466 -- Right_Opnd (Node3)
3467 -- plus fields for expression
3470 -- Sloc points to NOT of NOT IN
3471 -- Left_Opnd (Node2)
3472 -- Right_Opnd (Node3)
3473 -- plus fields for expression
3475 --------------------
3477 --------------------
3479 -- LOGICAL_OPERATOR ::= and | or | xor
3481 -- RELATIONAL_OPERATOR ::= = | /= | < | <= | > | >=
3483 -- BINARY_ADDING_OPERATOR ::= + | - | &
3485 -- UNARY_ADDING_OPERATOR ::= + | -
3487 -- MULTIPLYING_OPERATOR ::= * | / | mod | rem
3489 -- HIGHEST_PRECEDENCE_OPERATOR ::= ** | abs | not
3491 -- Sprint syntax if Treat_Fixed_As_Integer is set:
3498 -- Gigi restriction: For * / mod rem with fixed-point operands, Gigi
3499 -- will only be given nodes with the Treat_Fixed_As_Integer flag set.
3500 -- All handling of smalls for multiplication and division is handled
3501 -- by the front end (mod and rem result only from expansion). Gigi
3502 -- thus never needs to worry about small values (for other operators
3503 -- operating on fixed-point, e.g. addition, the small value does not
3504 -- have any semantic effect anyway, these are always integer operations.
3506 -- Gigi restriction: For all operators taking Boolean operands, the
3507 -- type is always Standard.Boolean. The expander inserts the required
3508 -- conversion operations where needed to ensure this is the case.
3511 -- Sloc points to AND
3512 -- Do_Length_Check (Flag4-Sem)
3513 -- plus fields for binary operator
3514 -- plus fields for expression
3517 -- Sloc points to OR
3518 -- Do_Length_Check (Flag4-Sem)
3519 -- plus fields for binary operator
3520 -- plus fields for expression
3523 -- Sloc points to XOR
3524 -- Do_Length_Check (Flag4-Sem)
3525 -- plus fields for binary operator
3526 -- plus fields for expression
3530 -- plus fields for binary operator
3531 -- plus fields for expression
3534 -- Sloc points to /=
3535 -- plus fields for binary operator
3536 -- plus fields for expression
3540 -- plus fields for binary operator
3541 -- plus fields for expression
3544 -- Sloc points to <=
3545 -- plus fields for binary operator
3546 -- plus fields for expression
3550 -- plus fields for binary operator
3551 -- plus fields for expression
3554 -- Sloc points to >=
3555 -- plus fields for binary operator
3556 -- plus fields for expression
3559 -- Sloc points to + (binary)
3560 -- plus fields for binary operator
3561 -- plus fields for expression
3564 -- Sloc points to - (binary)
3565 -- plus fields for binary operator
3566 -- plus fields for expression
3570 -- Is_Component_Left_Opnd (Flag13-Sem)
3571 -- Is_Component_Right_Opnd (Flag14-Sem)
3572 -- plus fields for binary operator
3573 -- plus fields for expression
3577 -- Treat_Fixed_As_Integer (Flag14-Sem)
3578 -- Rounded_Result (Flag18-Sem)
3579 -- plus fields for binary operator
3580 -- plus fields for expression
3584 -- Treat_Fixed_As_Integer (Flag14-Sem)
3585 -- Do_Division_Check (Flag13-Sem)
3586 -- Rounded_Result (Flag18-Sem)
3587 -- plus fields for binary operator
3588 -- plus fields for expression
3591 -- Sloc points to MOD
3592 -- Treat_Fixed_As_Integer (Flag14-Sem)
3593 -- Do_Division_Check (Flag13-Sem)
3594 -- plus fields for binary operator
3595 -- plus fields for expression
3598 -- Sloc points to REM
3599 -- Treat_Fixed_As_Integer (Flag14-Sem)
3600 -- Do_Division_Check (Flag13-Sem)
3601 -- plus fields for binary operator
3602 -- plus fields for expression
3605 -- Is_Power_Of_2_For_Shift (Flag13-Sem)
3606 -- Sloc points to **
3607 -- plus fields for binary operator
3608 -- plus fields for expression
3611 -- Sloc points to + (unary)
3612 -- plus fields for unary operator
3613 -- plus fields for expression
3616 -- Sloc points to - (unary)
3617 -- plus fields for unary operator
3618 -- plus fields for expression
3621 -- Sloc points to ABS
3622 -- plus fields for unary operator
3623 -- plus fields for expression
3626 -- Sloc points to NOT
3627 -- plus fields for unary operator
3628 -- plus fields for expression
3630 -- See also shift operators in section B.2
3632 -- Note on fixed-point operations passed to Gigi: For adding operators,
3633 -- the semantics is to treat these simply as integer operations, with
3634 -- the small values being ignored (the bounds are already stored in
3635 -- units of small, so that constraint checking works as usual). For the
3636 -- case of multiply/divide/rem/mod operations, Gigi will only see fixed
3637 -- point operands if the Treat_Fixed_As_Integer flag is set and will
3638 -- thus treat these nodes in identical manner, ignoring small values.
3640 --------------------------
3641 -- 4.6 Type Conversion --
3642 --------------------------
3644 -- TYPE_CONVERSION ::=
3645 -- SUBTYPE_MARK (EXPRESSION) | SUBTYPE_MARK (NAME)
3647 -- In the (NAME) case, the name is stored as the expression
3649 -- Note: the parser never generates a type conversion node, since it
3650 -- looks like an indexed component which is generated by preference.
3651 -- The semantic pass must correct this misidentification.
3653 -- Gigi handles conversions that involve no change in the root type,
3654 -- and also all conversions from integer to floating-point types.
3655 -- Conversions from floating-point to integer are only handled in
3656 -- the case where Float_Truncate flag set. Other conversions from
3657 -- floating-point to integer (involving rounding) and all conversions
3658 -- involving fixed-point types are handled by the expander.
3660 -- Sprint syntax if Float_Truncate set: X^(Y)
3661 -- Sprint syntax if Conversion_OK set X?(Y)
3662 -- Sprint syntax if both flags set X?^(Y)
3664 -- Note: If either the operand or result type is fixed-point, Gigi will
3665 -- only see a type conversion node with Conversion_OK set. The front end
3666 -- takes care of all handling of small's for fixed-point conversions.
3668 -- N_Type_Conversion
3669 -- Sloc points to first token of subtype mark
3670 -- Subtype_Mark (Node4)
3671 -- Expression (Node3)
3672 -- Do_Tag_Check (Flag13-Sem)
3673 -- Do_Length_Check (Flag4-Sem)
3674 -- Do_Overflow_Check (Flag17-Sem)
3675 -- Float_Truncate (Flag11-Sem)
3676 -- Rounded_Result (Flag18-Sem)
3677 -- Conversion_OK (Flag14-Sem)
3678 -- plus fields for expression
3680 -- Note: if a range check is required, then the Do_Range_Check flag
3681 -- is set in the Expression with the check being done against the
3682 -- target type range (after the base type conversion, if any).
3684 -------------------------------
3685 -- 4.7 Qualified Expression --
3686 -------------------------------
3688 -- QUALIFIED_EXPRESSION ::=
3689 -- SUBTYPE_MARK ' (EXPRESSION) | SUBTYPE_MARK ' AGGREGATE
3691 -- Note: the parentheses in the (EXPRESSION) case are deemed to enclose
3692 -- the expression, so the Expression field of this node always points
3693 -- to a parenthesized expression in this case (i.e. Paren_Count will
3694 -- always be non-zero for the referenced expression if it is not an
3697 -- N_Qualified_Expression
3698 -- Sloc points to apostrophe
3699 -- Subtype_Mark (Node4)
3700 -- Expression (Node3) expression or aggregate
3701 -- plus fields for expression
3703 --------------------
3705 --------------------
3708 -- new [NULL_EXCLUSION] SUBTYPE_INDICATION | new QUALIFIED_EXPRESSION
3710 -- Sprint syntax (when storage pool present)
3711 -- new xxx (storage_pool = pool)
3714 -- Sloc points to NEW
3715 -- Expression (Node3) subtype indication or qualified expression
3716 -- Storage_Pool (Node1-Sem)
3717 -- Procedure_To_Call (Node2-Sem)
3718 -- Coextensions (Elist4-Sem)
3719 -- Null_Exclusion_Present (Flag11)
3720 -- No_Initialization (Flag13-Sem)
3721 -- Is_Static_Coextension (Flag14-Sem)
3722 -- Do_Storage_Check (Flag17-Sem)
3723 -- Is_Dynamic_Coextension (Flag18-Sem)
3724 -- plus fields for expression
3726 ---------------------------------
3727 -- 5.1 Sequence Of Statements --
3728 ---------------------------------
3730 -- SEQUENCE_OF_STATEMENTS ::= STATEMENT {STATEMENT}
3732 -- Note: Although the parser will not accept a declaration as a
3733 -- statement, the semantic analyzer may insert declarations (e.g.
3734 -- declarations of implicit types needed for execution of other
3735 -- statements) into a sequence of statements, so the code generator
3736 -- should be prepared to accept a declaration where a statement is
3737 -- expected. Note also that pragmas can appear as statements.
3739 --------------------
3741 --------------------
3744 -- {LABEL} SIMPLE_STATEMENT | {LABEL} COMPOUND_STATEMENT
3746 -- There is no explicit node in the tree for a statement. Instead, the
3747 -- individual statement appears directly. Labels are treated as a
3748 -- kind of statement, i.e. they are linked into a statement list at
3749 -- the point they appear, so the labeled statement appears following
3750 -- the label or labels in the statement list.
3752 ---------------------------
3753 -- 5.1 Simple Statement --
3754 ---------------------------
3756 -- SIMPLE_STATEMENT ::= NULL_STATEMENT
3757 -- | ASSIGNMENT_STATEMENT | EXIT_STATEMENT
3758 -- | GOTO_STATEMENT | PROCEDURE_CALL_STATEMENT
3759 -- | SIMPLE_RETURN_STATEMENT | ENTRY_CALL_STATEMENT
3760 -- | REQUEUE_STATEMENT | DELAY_STATEMENT
3761 -- | ABORT_STATEMENT | RAISE_STATEMENT
3764 -----------------------------
3765 -- 5.1 Compound Statement --
3766 -----------------------------
3768 -- COMPOUND_STATEMENT ::=
3769 -- IF_STATEMENT | CASE_STATEMENT
3770 -- | LOOP_STATEMENT | BLOCK_STATEMENT
3771 -- | EXTENDED_RETURN_STATEMENT
3772 -- | ACCEPT_STATEMENT | SELECT_STATEMENT
3774 -------------------------
3775 -- 5.1 Null Statement --
3776 -------------------------
3778 -- NULL_STATEMENT ::= null;
3781 -- Sloc points to NULL
3787 -- LABEL ::= <<label_STATEMENT_IDENTIFIER>>
3789 -- Note that the occurrence of a label is not a defining identifier,
3790 -- but rather a referencing occurrence. The defining occurrence is
3791 -- in the implicit label declaration which occurs in the innermost
3795 -- Sloc points to <<
3796 -- Identifier (Node1) direct name of statement identifier
3797 -- Exception_Junk (Flag8-Sem)
3799 -------------------------------
3800 -- 5.1 Statement Identifier --
3801 -------------------------------
3803 -- STATEMENT_IDENTIFIER ::= DIRECT_NAME
3805 -- The IDENTIFIER of a STATEMENT_IDENTIFIER shall be an identifier
3806 -- (not an OPERATOR_SYMBOL)
3808 -------------------------------
3809 -- 5.2 Assignment Statement --
3810 -------------------------------
3812 -- ASSIGNMENT_STATEMENT ::=
3813 -- variable_NAME := EXPRESSION;
3815 -- N_Assignment_Statement
3816 -- Sloc points to :=
3818 -- Expression (Node3)
3819 -- Do_Tag_Check (Flag13-Sem)
3820 -- Do_Length_Check (Flag4-Sem)
3821 -- Forwards_OK (Flag5-Sem)
3822 -- Backwards_OK (Flag6-Sem)
3823 -- No_Ctrl_Actions (Flag7-Sem)
3825 -- Note: if a range check is required, then the Do_Range_Check flag
3826 -- is set in the Expression (right hand side), with the check being
3827 -- done against the type of the Name (left hand side).
3829 -- Note: the back end places some restrictions on the form of the
3830 -- Expression field. If the object being assigned to is Atomic, then
3831 -- the Expression may not have the form of an aggregate (since this
3832 -- might cause the back end to generate separate assignments). It
3833 -- also cannot be a reference to an object marked as a true constant
3834 -- (Is_True_Constant flag set), where the object is itself initialized
3835 -- with an aggregate. If necessary the front end must generate an
3836 -- extra temporary (with Is_True_Constant set False), and initialize
3837 -- this temporary as required (the temporary itself is not atomic).
3839 -----------------------
3840 -- 5.3 If Statement --
3841 -----------------------
3844 -- if CONDITION then
3845 -- SEQUENCE_OF_STATEMENTS
3846 -- {elsif CONDITION then
3847 -- SEQUENCE_OF_STATEMENTS}
3849 -- SEQUENCE_OF_STATEMENTS]
3852 -- Gigi restriction: This expander ensures that the type of the
3853 -- Condition fields is always Standard.Boolean, even if the type
3854 -- in the source is some non-standard boolean type.
3857 -- Sloc points to IF
3858 -- Condition (Node1)
3859 -- Then_Statements (List2)
3860 -- Elsif_Parts (List3) (set to No_List if none present)
3861 -- Else_Statements (List4) (set to No_List if no else part present)
3862 -- End_Span (Uint5) (set to No_Uint if expander generated)
3865 -- Sloc points to ELSIF
3866 -- Condition (Node1)
3867 -- Then_Statements (List2)
3868 -- Condition_Actions (List3-Sem)
3870 --------------------
3872 --------------------
3874 -- CONDITION ::= boolean_EXPRESSION
3876 -------------------------
3877 -- 5.4 Case Statement --
3878 -------------------------
3880 -- CASE_STATEMENT ::=
3881 -- case EXPRESSION is
3882 -- CASE_STATEMENT_ALTERNATIVE
3883 -- {CASE_STATEMENT_ALTERNATIVE}
3886 -- Note: the Alternatives can contain pragmas. These only occur at
3887 -- the start of the list, since any pragmas occurring after the first
3888 -- alternative are absorbed into the corresponding statement sequence.
3891 -- Sloc points to CASE
3892 -- Expression (Node3)
3893 -- Alternatives (List4)
3894 -- End_Span (Uint5) (set to No_Uint if expander generated)
3896 -------------------------------------
3897 -- 5.4 Case Statement Alternative --
3898 -------------------------------------
3900 -- CASE_STATEMENT_ALTERNATIVE ::=
3901 -- when DISCRETE_CHOICE_LIST =>
3902 -- SEQUENCE_OF_STATEMENTS
3904 -- N_Case_Statement_Alternative
3905 -- Sloc points to WHEN
3906 -- Discrete_Choices (List4)
3907 -- Statements (List3)
3909 -------------------------
3910 -- 5.5 Loop Statement --
3911 -------------------------
3913 -- LOOP_STATEMENT ::=
3914 -- [loop_STATEMENT_IDENTIFIER :]
3915 -- [ITERATION_SCHEME] loop
3916 -- SEQUENCE_OF_STATEMENTS
3917 -- end loop [loop_IDENTIFIER];
3919 -- Note: The occurrence of a loop label is not a defining identifier
3920 -- but rather a referencing occurrence. The defining occurrence is in
3921 -- the implicit label declaration which occurs in the innermost
3924 -- Note: there is always a loop statement identifier present in
3925 -- the tree, even if none was given in the source. In the case where
3926 -- no loop identifier is given in the source, the parser creates
3927 -- a name of the form _Loop_n, where n is a decimal integer (the
3928 -- two underlines ensure that the loop names created in this manner
3929 -- do not conflict with any user defined identifiers), and the flag
3930 -- Has_Created_Identifier is set to True. The only exception to the
3931 -- rule that all loop statement nodes have identifiers occurs for
3932 -- loops constructed by the expander, and the semantic analyzer will
3933 -- create and supply dummy loop identifiers in these cases.
3936 -- Sloc points to LOOP
3937 -- Identifier (Node1) loop identifier (set to Empty if no identifier)
3938 -- Iteration_Scheme (Node2) (set to Empty if no iteration scheme)
3939 -- Statements (List3)
3940 -- End_Label (Node4)
3941 -- Has_Created_Identifier (Flag15)
3942 -- Is_Null_Loop (Flag16)
3944 --------------------------
3945 -- 5.5 Iteration Scheme --
3946 --------------------------
3948 -- ITERATION_SCHEME ::=
3949 -- while CONDITION | for LOOP_PARAMETER_SPECIFICATION
3951 -- Gigi restriction: This expander ensures that the type of the
3952 -- Condition field is always Standard.Boolean, even if the type
3953 -- in the source is some non-standard boolean type.
3955 -- N_Iteration_Scheme
3956 -- Sloc points to WHILE or FOR
3957 -- Condition (Node1) (set to Empty if FOR case)
3958 -- Condition_Actions (List3-Sem)
3959 -- Loop_Parameter_Specification (Node4) (set to Empty if WHILE case)
3961 ---------------------------------------
3962 -- 5.5 Loop parameter specification --
3963 ---------------------------------------
3965 -- LOOP_PARAMETER_SPECIFICATION ::=
3966 -- DEFINING_IDENTIFIER in [reverse] DISCRETE_SUBTYPE_DEFINITION
3968 -- N_Loop_Parameter_Specification
3969 -- Sloc points to first identifier
3970 -- Defining_Identifier (Node1)
3971 -- Reverse_Present (Flag15)
3972 -- Discrete_Subtype_Definition (Node4)
3974 --------------------------
3975 -- 5.6 Block Statement --
3976 --------------------------
3978 -- BLOCK_STATEMENT ::=
3979 -- [block_STATEMENT_IDENTIFIER:]
3981 -- DECLARATIVE_PART]
3983 -- HANDLED_SEQUENCE_OF_STATEMENTS
3984 -- end [block_IDENTIFIER];
3986 -- Note that the occurrence of a block identifier is not a defining
3987 -- identifier, but rather a referencing occurrence. The defining
3988 -- occurrence is an E_Block entity declared by the implicit label
3989 -- declaration which occurs in the innermost enclosing block statement
3990 -- or body; the block identifier denotes that E_Block.
3992 -- For block statements that come from source code, there is always a
3993 -- block statement identifier present in the tree, denoting an
3994 -- E_Block. In the case where no block identifier is given in the
3995 -- source, the parser creates a name of the form B_n, where n is a
3996 -- decimal integer, and the flag Has_Created_Identifier is set to
3997 -- True. Blocks constructed by the expander usually have no identifier,
3998 -- and no corresponding entity.
4000 -- Note: the block statement created for an extended return statement
4001 -- has an entity, and this entity is an E_Return_Statement, rather than
4002 -- the usual E_Block.
4004 -- Note: Exception_Junk is set for the wrapping blocks created during
4005 -- local raise optimization (Exp_Ch11.Expand_Local_Exception_Handlers).
4007 -- N_Block_Statement
4008 -- Sloc points to DECLARE or BEGIN
4009 -- Identifier (Node1) block direct name (set to Empty if not present)
4010 -- Declarations (List2) (set to No_List if no DECLARE part)
4011 -- Handled_Statement_Sequence (Node4)
4012 -- Is_Task_Master (Flag5-Sem)
4013 -- Activation_Chain_Entity (Node3-Sem)
4014 -- Has_Created_Identifier (Flag15)
4015 -- Is_Task_Allocation_Block (Flag6)
4016 -- Is_Asynchronous_Call_Block (Flag7)
4017 -- Exception_Junk (Flag8-Sem)
4019 -------------------------
4020 -- 5.7 Exit Statement --
4021 -------------------------
4023 -- EXIT_STATEMENT ::= exit [loop_NAME] [when CONDITION];
4025 -- Gigi restriction: This expander ensures that the type of the
4026 -- Condition field is always Standard.Boolean, even if the type
4027 -- in the source is some non-standard boolean type.
4030 -- Sloc points to EXIT
4031 -- Name (Node2) (set to Empty if no loop name present)
4032 -- Condition (Node1) (set to Empty if no when part present)
4034 -------------------------
4035 -- 5.9 Goto Statement --
4036 -------------------------
4038 -- GOTO_STATEMENT ::= goto label_NAME;
4041 -- Sloc points to GOTO
4043 -- Exception_Junk (Flag8-Sem)
4045 ---------------------------------
4046 -- 6.1 Subprogram Declaration --
4047 ---------------------------------
4049 -- SUBPROGRAM_DECLARATION ::= SUBPROGRAM_SPECIFICATION;
4051 -- N_Subprogram_Declaration
4052 -- Sloc points to FUNCTION or PROCEDURE
4053 -- Specification (Node1)
4054 -- Body_To_Inline (Node3-Sem)
4055 -- Corresponding_Body (Node5-Sem)
4056 -- Parent_Spec (Node4-Sem)
4058 ------------------------------------------
4059 -- 6.1 Abstract Subprogram Declaration --
4060 ------------------------------------------
4062 -- ABSTRACT_SUBPROGRAM_DECLARATION ::=
4063 -- SUBPROGRAM_SPECIFICATION is abstract;
4065 -- N_Abstract_Subprogram_Declaration
4066 -- Sloc points to ABSTRACT
4067 -- Specification (Node1)
4069 -----------------------------------
4070 -- 6.1 Subprogram Specification --
4071 -----------------------------------
4073 -- SUBPROGRAM_SPECIFICATION ::=
4074 -- [[not] overriding]
4075 -- procedure DEFINING_PROGRAM_UNIT_NAME PARAMETER_PROFILE
4076 -- | [[not] overriding]
4077 -- function DEFINING_DESIGNATOR PARAMETER_AND_RESULT_PROFILE
4079 -- Note: there are no separate nodes for the profiles, instead the
4080 -- information appears directly in the following nodes.
4082 -- N_Function_Specification
4083 -- Sloc points to FUNCTION
4084 -- Defining_Unit_Name (Node1) (the designator)
4085 -- Elaboration_Boolean (Node2-Sem)
4086 -- Parameter_Specifications (List3) (set to No_List if no formal part)
4087 -- Null_Exclusion_Present (Flag11)
4088 -- Result_Definition (Node4) for result subtype
4089 -- Generic_Parent (Node5-Sem)
4090 -- Must_Override (Flag14) set if overriding indicator present
4091 -- Must_Not_Override (Flag15) set if not_overriding indicator present
4093 -- N_Procedure_Specification
4094 -- Sloc points to PROCEDURE
4095 -- Defining_Unit_Name (Node1)
4096 -- Elaboration_Boolean (Node2-Sem)
4097 -- Parameter_Specifications (List3) (set to No_List if no formal part)
4098 -- Generic_Parent (Node5-Sem)
4099 -- Null_Present (Flag13) set for null procedure case (Ada 2005 feature)
4100 -- Must_Override (Flag14) set if overriding indicator present
4101 -- Must_Not_Override (Flag15) set if not_overriding indicator present
4103 -- Note: overriding indicator is an Ada 2005 feature
4105 ---------------------
4106 -- 6.1 Designator --
4107 ---------------------
4110 -- [PARENT_UNIT_NAME .] IDENTIFIER | OPERATOR_SYMBOL
4112 -- Designators that are simply identifiers or operator symbols appear
4113 -- directly in the tree in this form. The following node is used only
4114 -- in the case where the designator has a parent unit name component.
4117 -- Sloc points to period
4118 -- Name (Node2) holds the parent unit name. Note that this is always
4119 -- non-Empty, since this node is only used for the case where a
4120 -- parent library unit package name is present.
4121 -- Identifier (Node1)
4123 -- Note that the identifier can also be an operator symbol here
4125 ------------------------------
4126 -- 6.1 Defining Designator --
4127 ------------------------------
4129 -- DEFINING_DESIGNATOR ::=
4130 -- DEFINING_PROGRAM_UNIT_NAME | DEFINING_OPERATOR_SYMBOL
4132 -------------------------------------
4133 -- 6.1 Defining Program Unit Name --
4134 -------------------------------------
4136 -- DEFINING_PROGRAM_UNIT_NAME ::=
4137 -- [PARENT_UNIT_NAME .] DEFINING_IDENTIFIER
4139 -- The parent unit name is present only in the case of a child unit
4140 -- name (permissible only for Ada 95 for a library level unit, i.e.
4141 -- a unit at scope level one). If no such name is present, the defining
4142 -- program unit name is represented simply as the defining identifier.
4143 -- In the child unit case, the following node is used to represent the
4146 -- N_Defining_Program_Unit_Name
4147 -- Sloc points to period
4148 -- Name (Node2) holds the parent unit name. Note that this is always
4149 -- non-Empty, since this node is only used for the case where a
4150 -- parent unit name is present.
4151 -- Defining_Identifier (Node1)
4153 --------------------------
4154 -- 6.1 Operator Symbol --
4155 --------------------------
4157 -- OPERATOR_SYMBOL ::= STRING_LITERAL
4159 -- Note: the fields of the N_Operator_Symbol node are laid out to
4160 -- match the corresponding fields of an N_Character_Literal node. This
4161 -- allows easy conversion of the operator symbol node into a character
4162 -- literal node in the case where a string constant of the form of an
4163 -- operator symbol is scanned out as such, but turns out semantically
4164 -- to be a string literal that is not an operator. For details see
4165 -- Sinfo.CN.Change_Operator_Symbol_To_String_Literal.
4167 -- N_Operator_Symbol
4168 -- Sloc points to literal
4169 -- Chars (Name1) contains the Name_Id for the operator symbol
4170 -- Strval (Str3) Id of string value. This is used if the operator
4171 -- symbol turns out to be a normal string after all.
4172 -- Entity (Node4-Sem)
4173 -- Associated_Node (Node4-Sem)
4174 -- Has_Private_View (Flag11-Sem) set in generic units.
4175 -- Etype (Node5-Sem)
4177 -- Note: the Strval field may be set to No_String for generated
4178 -- operator symbols that are known not to be string literals
4181 -----------------------------------
4182 -- 6.1 Defining Operator Symbol --
4183 -----------------------------------
4185 -- DEFINING_OPERATOR_SYMBOL ::= OPERATOR_SYMBOL
4187 -- A defining operator symbol is an entity, which has additional
4188 -- fields depending on the setting of the Ekind field. These
4189 -- additional fields are defined (and access subprograms declared)
4190 -- in package Einfo.
4192 -- Note: N_Defining_Operator_Symbol is an extended node whose fields
4193 -- are deliberately layed out to match the layout of fields in an
4194 -- ordinary N_Operator_Symbol node allowing for easy alteration of
4195 -- an operator symbol node into a defining operator symbol node.
4196 -- See Sinfo.CN.Change_Operator_Symbol_To_Defining_Operator_Symbol
4197 -- for further details.
4199 -- N_Defining_Operator_Symbol
4200 -- Sloc points to literal
4201 -- Chars (Name1) contains the Name_Id for the operator symbol
4202 -- Next_Entity (Node2-Sem)
4203 -- Scope (Node3-Sem)
4204 -- Etype (Node5-Sem)
4206 ----------------------------
4207 -- 6.1 Parameter Profile --
4208 ----------------------------
4210 -- PARAMETER_PROFILE ::= [FORMAL_PART]
4212 ---------------------------------------
4213 -- 6.1 Parameter and Result Profile --
4214 ---------------------------------------
4216 -- PARAMETER_AND_RESULT_PROFILE ::=
4217 -- [FORMAL_PART] return [NULL_EXCLUSION] SUBTYPE_MARK
4218 -- | [FORMAL_PART] return ACCESS_DEFINITION
4220 -- There is no explicit node in the tree for a parameter and result
4221 -- profile. Instead the information appears directly in the parent.
4223 ----------------------
4224 -- 6.1 Formal part --
4225 ----------------------
4228 -- (PARAMETER_SPECIFICATION {; PARAMETER_SPECIFICATION})
4230 ----------------------------------
4231 -- 6.1 Parameter specification --
4232 ----------------------------------
4234 -- PARAMETER_SPECIFICATION ::=
4235 -- DEFINING_IDENTIFIER_LIST : MODE [NULL_EXCLUSION] SUBTYPE_MARK
4236 -- [:= DEFAULT_EXPRESSION]
4237 -- | DEFINING_IDENTIFIER_LIST : ACCESS_DEFINITION
4238 -- [:= DEFAULT_EXPRESSION]
4240 -- Although the syntax allows multiple identifiers in the list, the
4241 -- semantics is as though successive specifications were given with
4242 -- identical type definition and expression components. To simplify
4243 -- semantic processing, the parser represents a multiple declaration
4244 -- case as a sequence of single Specifications, using the More_Ids and
4245 -- Prev_Ids flags to preserve the original source form as described
4246 -- in the section on "Handling of Defining Identifier Lists".
4248 -- N_Parameter_Specification
4249 -- Sloc points to first identifier
4250 -- Defining_Identifier (Node1)
4251 -- In_Present (Flag15)
4252 -- Out_Present (Flag17)
4253 -- Null_Exclusion_Present (Flag11)
4254 -- Parameter_Type (Node2) subtype mark or access definition
4255 -- Expression (Node3) (set to Empty if no default expression present)
4256 -- Do_Accessibility_Check (Flag13-Sem)
4257 -- More_Ids (Flag5) (set to False if no more identifiers in list)
4258 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
4259 -- Default_Expression (Node5-Sem)
4265 -- MODE ::= [in] | in out | out
4267 -- There is no explicit node in the tree for the Mode. Instead the
4268 -- In_Present and Out_Present flags are set in the parent node to
4269 -- record the presence of keywords specifying the mode.
4271 --------------------------
4272 -- 6.3 Subprogram Body --
4273 --------------------------
4275 -- SUBPROGRAM_BODY ::=
4276 -- SUBPROGRAM_SPECIFICATION is
4279 -- HANDLED_SEQUENCE_OF_STATEMENTS
4280 -- end [DESIGNATOR];
4282 -- N_Subprogram_Body
4283 -- Sloc points to FUNCTION or PROCEDURE
4284 -- Specification (Node1)
4285 -- Declarations (List2)
4286 -- Handled_Statement_Sequence (Node4)
4287 -- Activation_Chain_Entity (Node3-Sem)
4288 -- Corresponding_Spec (Node5-Sem)
4289 -- Acts_As_Spec (Flag4-Sem)
4290 -- Bad_Is_Detected (Flag15) used only by parser
4291 -- Do_Storage_Check (Flag17-Sem)
4292 -- Has_Priority_Pragma (Flag6-Sem)
4293 -- Is_Protected_Subprogram_Body (Flag7-Sem)
4294 -- Is_Entry_Barrier_Function (Flag8-Sem)
4295 -- Is_Task_Master (Flag5-Sem)
4296 -- Was_Originally_Stub (Flag13-Sem)
4297 -- Has_Relative_Deadline_Pragma (Flag9-Sem)
4299 -----------------------------------
4300 -- 6.4 Procedure Call Statement --
4301 -----------------------------------
4303 -- PROCEDURE_CALL_STATEMENT ::=
4304 -- procedure_NAME; | procedure_PREFIX ACTUAL_PARAMETER_PART;
4306 -- Note: the reason that a procedure call has expression fields is
4307 -- that it semantically resembles an expression, e.g. overloading is
4308 -- allowed and a type is concocted for semantic processing purposes.
4309 -- Certain of these fields, such as Parens are not relevant, but it
4310 -- is easier to just supply all of them together!
4312 -- N_Procedure_Call_Statement
4313 -- Sloc points to first token of name or prefix
4314 -- Name (Node2) stores name or prefix
4315 -- Parameter_Associations (List3) (set to No_List if no
4316 -- actual parameter part)
4317 -- First_Named_Actual (Node4-Sem)
4318 -- Controlling_Argument (Node1-Sem) (set to Empty if not dispatching)
4319 -- Do_Tag_Check (Flag13-Sem)
4320 -- No_Elaboration_Check (Flag14-Sem)
4321 -- Parameter_List_Truncated (Flag17-Sem)
4322 -- ABE_Is_Certain (Flag18-Sem)
4323 -- plus fields for expression
4325 -- If any IN parameter requires a range check, then the corresponding
4326 -- argument expression has the Do_Range_Check flag set, and the range
4327 -- check is done against the formal type. Note that this argument
4328 -- expression may appear directly in the Parameter_Associations list,
4329 -- or may be a descendent of an N_Parameter_Association node that
4330 -- appears in this list.
4332 ------------------------
4333 -- 6.4 Function Call --
4334 ------------------------
4336 -- FUNCTION_CALL ::=
4337 -- function_NAME | function_PREFIX ACTUAL_PARAMETER_PART
4339 -- Note: the parser may generate an indexed component node or simply
4340 -- a name node instead of a function call node. The semantic pass must
4341 -- correct this misidentification.
4344 -- Sloc points to first token of name or prefix
4345 -- Name (Node2) stores name or prefix
4346 -- Parameter_Associations (List3) (set to No_List if no
4347 -- actual parameter part)
4348 -- First_Named_Actual (Node4-Sem)
4349 -- Controlling_Argument (Node1-Sem) (set to Empty if not dispatching)
4350 -- Is_Expanded_Build_In_Place_Call (Flag11-Sem)
4351 -- Do_Tag_Check (Flag13-Sem)
4352 -- No_Elaboration_Check (Flag14-Sem)
4353 -- Parameter_List_Truncated (Flag17-Sem)
4354 -- ABE_Is_Certain (Flag18-Sem)
4355 -- plus fields for expression
4357 --------------------------------
4358 -- 6.4 Actual Parameter Part --
4359 --------------------------------
4361 -- ACTUAL_PARAMETER_PART ::=
4362 -- (PARAMETER_ASSOCIATION {,PARAMETER_ASSOCIATION})
4364 --------------------------------
4365 -- 6.4 Parameter Association --
4366 --------------------------------
4368 -- PARAMETER_ASSOCIATION ::=
4369 -- [formal_parameter_SELECTOR_NAME =>] EXPLICIT_ACTUAL_PARAMETER
4371 -- Note: the N_Parameter_Association node is built only if a formal
4372 -- parameter selector name is present, otherwise the parameter
4373 -- association appears in the tree simply as the node for the
4374 -- explicit actual parameter.
4376 -- N_Parameter_Association
4377 -- Sloc points to formal parameter
4378 -- Selector_Name (Node2) (always non-Empty)
4379 -- Explicit_Actual_Parameter (Node3)
4380 -- Next_Named_Actual (Node4-Sem)
4382 ---------------------------
4383 -- 6.4 Actual Parameter --
4384 ---------------------------
4386 -- EXPLICIT_ACTUAL_PARAMETER ::= EXPRESSION | variable_NAME
4388 ---------------------------
4389 -- 6.5 Return Statement --
4390 ---------------------------
4392 -- RETURN_STATEMENT ::= return [EXPRESSION]; -- Ada 95
4394 -- In Ada 2005, we have:
4396 -- SIMPLE_RETURN_STATEMENT ::= return [EXPRESSION];
4398 -- EXTENDED_RETURN_STATEMENT ::=
4399 -- return DEFINING_IDENTIFIER : [aliased] RETURN_SUBTYPE_INDICATION
4400 -- [:= EXPRESSION] [do
4401 -- HANDLED_SEQUENCE_OF_STATEMENTS
4404 -- RETURN_SUBTYPE_INDICATION ::= SUBTYPE_INDICATION | ACCESS_DEFINITION
4406 -- So in Ada 2005, RETURN_STATEMENT is no longer a nonterminal, but
4407 -- "return statement" is defined in 6.5 to mean a
4408 -- SIMPLE_RETURN_STATEMENT or an EXTENDED_RETURN_STATEMENT.
4410 -- N_Return_Statement
4411 -- Sloc points to RETURN
4412 -- Return_Statement_Entity (Node5-Sem)
4413 -- Expression (Node3) (set to Empty if no expression present)
4414 -- Storage_Pool (Node1-Sem)
4415 -- Procedure_To_Call (Node2-Sem)
4416 -- Do_Tag_Check (Flag13-Sem)
4417 -- By_Ref (Flag5-Sem)
4418 -- Comes_From_Extended_Return_Statement (Flag18-Sem)
4420 -- N_Return_Statement represents a simple_return_statement, and is
4421 -- renamed to be N_Simple_Return_Statement below. Clients should refer
4422 -- to N_Simple_Return_Statement. We retain N_Return_Statement because
4423 -- that's how gigi knows it. See also renaming of Make_Return_Statement
4424 -- as Make_Simple_Return_Statement in Sem_Util.
4426 -- Note: Return_Statement_Entity points to an E_Return_Statement
4428 -- If a range check is required, then Do_Range_Check is set on the
4429 -- Expression. The check is against the return subtype of the function.
4431 -- N_Extended_Return_Statement
4432 -- Sloc points to RETURN
4433 -- Return_Statement_Entity (Node5-Sem)
4434 -- Return_Object_Declarations (List3)
4435 -- Handled_Statement_Sequence (Node4) (set to Empty if not present)
4436 -- Storage_Pool (Node1-Sem)
4437 -- Procedure_To_Call (Node2-Sem)
4438 -- Do_Tag_Check (Flag13-Sem)
4439 -- By_Ref (Flag5-Sem)
4441 -- Note: Return_Statement_Entity points to an E_Return_Statement.
4442 -- Note that Return_Object_Declarations is a list containing the
4443 -- N_Object_Declaration -- see comment on this field above.
4444 -- The declared object will have Is_Return_Object = True.
4445 -- There is no such syntactic category as return_object_declaration
4446 -- in the RM. Return_Object_Declarations represents this portion of
4447 -- the syntax for EXTENDED_RETURN_STATEMENT:
4448 -- DEFINING_IDENTIFIER : [aliased] RETURN_SUBTYPE_INDICATION
4451 -- There are two entities associated with an extended_return_statement:
4452 -- the Return_Statement_Entity represents the statement itself, and the
4453 -- Defining_Identifier of the Object_Declaration in
4454 -- Return_Object_Declarations represents the object being
4455 -- returned. N_Simple_Return_Statement has only the former.
4457 ------------------------------
4458 -- 7.1 Package Declaration --
4459 ------------------------------
4461 -- PACKAGE_DECLARATION ::= PACKAGE_SPECIFICATION;
4463 -- Note: the activation chain entity for a package spec is used for
4464 -- all tasks declared in the package spec, or in the package body.
4466 -- N_Package_Declaration
4467 -- Sloc points to PACKAGE
4468 -- Specification (Node1)
4469 -- Corresponding_Body (Node5-Sem)
4470 -- Parent_Spec (Node4-Sem)
4471 -- Activation_Chain_Entity (Node3-Sem)
4473 --------------------------------
4474 -- 7.1 Package Specification --
4475 --------------------------------
4477 -- PACKAGE_SPECIFICATION ::=
4478 -- package DEFINING_PROGRAM_UNIT_NAME is
4479 -- {BASIC_DECLARATIVE_ITEM}
4481 -- {BASIC_DECLARATIVE_ITEM}]
4482 -- end [[PARENT_UNIT_NAME .] IDENTIFIER]
4484 -- N_Package_Specification
4485 -- Sloc points to PACKAGE
4486 -- Defining_Unit_Name (Node1)
4487 -- Visible_Declarations (List2)
4488 -- Private_Declarations (List3) (set to No_List if no private
4490 -- End_Label (Node4)
4491 -- Generic_Parent (Node5-Sem)
4492 -- Limited_View_Installed (Flag18-Sem)
4494 -----------------------
4495 -- 7.1 Package Body --
4496 -----------------------
4499 -- package body DEFINING_PROGRAM_UNIT_NAME is
4502 -- HANDLED_SEQUENCE_OF_STATEMENTS]
4503 -- end [[PARENT_UNIT_NAME .] IDENTIFIER];
4506 -- Sloc points to PACKAGE
4507 -- Defining_Unit_Name (Node1)
4508 -- Declarations (List2)
4509 -- Handled_Statement_Sequence (Node4) (set to Empty if no HSS present)
4510 -- Corresponding_Spec (Node5-Sem)
4511 -- Was_Originally_Stub (Flag13-Sem)
4513 -- Note: if a source level package does not contain a handled sequence
4514 -- of statements, then the parser supplies a dummy one with a null
4515 -- sequence of statements. Comes_From_Source will be False in this
4516 -- constructed sequence. The reason we need this is for the End_Label
4517 -- field in the HSS.
4519 -----------------------------------
4520 -- 7.4 Private Type Declaration --
4521 -----------------------------------
4523 -- PRIVATE_TYPE_DECLARATION ::=
4524 -- type DEFINING_IDENTIFIER [DISCRIMINANT_PART]
4525 -- is [[abstract] tagged] [limited] private;
4527 -- Note: TAGGED is not permitted in Ada 83 mode
4529 -- N_Private_Type_Declaration
4530 -- Sloc points to TYPE
4531 -- Defining_Identifier (Node1)
4532 -- Discriminant_Specifications (List4) (set to No_List if no
4533 -- discriminant part)
4534 -- Unknown_Discriminants_Present (Flag13) set if (<>) discriminant
4535 -- Abstract_Present (Flag4)
4536 -- Tagged_Present (Flag15)
4537 -- Limited_Present (Flag17)
4539 ----------------------------------------
4540 -- 7.4 Private Extension Declaration --
4541 ----------------------------------------
4543 -- PRIVATE_EXTENSION_DECLARATION ::=
4544 -- type DEFINING_IDENTIFIER [DISCRIMINANT_PART] is
4545 -- [abstract] [limited | synchronized]
4546 -- new ancestor_SUBTYPE_INDICATION [and INTERFACE_LIST]
4549 -- Note: LIMITED, and private extension declarations are not allowed
4552 -- N_Private_Extension_Declaration
4553 -- Sloc points to TYPE
4554 -- Defining_Identifier (Node1)
4555 -- Discriminant_Specifications (List4) (set to No_List if no
4556 -- discriminant part)
4557 -- Unknown_Discriminants_Present (Flag13) set if (<>) discriminant
4558 -- Abstract_Present (Flag4)
4559 -- Limited_Present (Flag17)
4560 -- Synchronized_Present (Flag7)
4561 -- Subtype_Indication (Node5)
4562 -- Interface_List (List2) (set to No_List if none)
4564 ---------------------
4565 -- 8.4 Use Clause --
4566 ---------------------
4568 -- USE_CLAUSE ::= USE_PACKAGE_CLAUSE | USE_TYPE_CLAUSE
4570 -----------------------------
4571 -- 8.4 Use Package Clause --
4572 -----------------------------
4574 -- USE_PACKAGE_CLAUSE ::= use package_NAME {, package_NAME};
4576 -- N_Use_Package_Clause
4577 -- Sloc points to USE
4579 -- Next_Use_Clause (Node3-Sem)
4580 -- Hidden_By_Use_Clause (Elist4-Sem)
4582 --------------------------
4583 -- 8.4 Use Type Clause --
4584 --------------------------
4586 -- USE_TYPE_CLAUSE ::= use type SUBTYPE_MARK {, SUBTYPE_MARK};
4588 -- Note: use type clause is not permitted in Ada 83 mode
4590 -- N_Use_Type_Clause
4591 -- Sloc points to USE
4592 -- Subtype_Marks (List2)
4593 -- Next_Use_Clause (Node3-Sem)
4594 -- Hidden_By_Use_Clause (Elist4-Sem)
4596 -------------------------------
4597 -- 8.5 Renaming Declaration --
4598 -------------------------------
4600 -- RENAMING_DECLARATION ::=
4601 -- OBJECT_RENAMING_DECLARATION
4602 -- | EXCEPTION_RENAMING_DECLARATION
4603 -- | PACKAGE_RENAMING_DECLARATION
4604 -- | SUBPROGRAM_RENAMING_DECLARATION
4605 -- | GENERIC_RENAMING_DECLARATION
4607 --------------------------------------
4608 -- 8.5 Object Renaming Declaration --
4609 --------------------------------------
4611 -- OBJECT_RENAMING_DECLARATION ::=
4612 -- DEFINING_IDENTIFIER :
4613 -- [NULL_EXCLUSION] SUBTYPE_MARK renames object_NAME;
4614 -- | DEFINING_IDENTIFIER :
4615 -- ACCESS_DEFINITION renames object_NAME;
4617 -- Note: Access_Definition is an optional field that gives support to
4618 -- Ada 2005 (AI-230). The parser generates nodes that have either the
4619 -- Subtype_Indication field or else the Access_Definition field.
4621 -- N_Object_Renaming_Declaration
4622 -- Sloc points to first identifier
4623 -- Defining_Identifier (Node1)
4624 -- Null_Exclusion_Present (Flag11) (set to False if not present)
4625 -- Subtype_Mark (Node4) (set to Empty if not present)
4626 -- Access_Definition (Node3) (set to Empty if not present)
4628 -- Corresponding_Generic_Association (Node5-Sem)
4630 -----------------------------------------
4631 -- 8.5 Exception Renaming Declaration --
4632 -----------------------------------------
4634 -- EXCEPTION_RENAMING_DECLARATION ::=
4635 -- DEFINING_IDENTIFIER : exception renames exception_NAME;
4637 -- N_Exception_Renaming_Declaration
4638 -- Sloc points to first identifier
4639 -- Defining_Identifier (Node1)
4642 ---------------------------------------
4643 -- 8.5 Package Renaming Declaration --
4644 ---------------------------------------
4646 -- PACKAGE_RENAMING_DECLARATION ::=
4647 -- package DEFINING_PROGRAM_UNIT_NAME renames package_NAME;
4649 -- N_Package_Renaming_Declaration
4650 -- Sloc points to PACKAGE
4651 -- Defining_Unit_Name (Node1)
4653 -- Parent_Spec (Node4-Sem)
4655 ------------------------------------------
4656 -- 8.5 Subprogram Renaming Declaration --
4657 ------------------------------------------
4659 -- SUBPROGRAM_RENAMING_DECLARATION ::=
4660 -- SUBPROGRAM_SPECIFICATION renames callable_entity_NAME;
4662 -- N_Subprogram_Renaming_Declaration
4663 -- Sloc points to RENAMES
4664 -- Specification (Node1)
4666 -- Parent_Spec (Node4-Sem)
4667 -- Corresponding_Spec (Node5-Sem)
4668 -- Corresponding_Formal_Spec (Node3-Sem)
4669 -- From_Default (Flag6-Sem)
4671 -----------------------------------------
4672 -- 8.5.5 Generic Renaming Declaration --
4673 -----------------------------------------
4675 -- GENERIC_RENAMING_DECLARATION ::=
4676 -- generic package DEFINING_PROGRAM_UNIT_NAME
4677 -- renames generic_package_NAME
4678 -- | generic procedure DEFINING_PROGRAM_UNIT_NAME
4679 -- renames generic_procedure_NAME
4680 -- | generic function DEFINING_PROGRAM_UNIT_NAME
4681 -- renames generic_function_NAME
4683 -- N_Generic_Package_Renaming_Declaration
4684 -- Sloc points to GENERIC
4685 -- Defining_Unit_Name (Node1)
4687 -- Parent_Spec (Node4-Sem)
4689 -- N_Generic_Procedure_Renaming_Declaration
4690 -- Sloc points to GENERIC
4691 -- Defining_Unit_Name (Node1)
4693 -- Parent_Spec (Node4-Sem)
4695 -- N_Generic_Function_Renaming_Declaration
4696 -- Sloc points to GENERIC
4697 -- Defining_Unit_Name (Node1)
4699 -- Parent_Spec (Node4-Sem)
4701 --------------------------------
4702 -- 9.1 Task Type Declaration --
4703 --------------------------------
4705 -- TASK_TYPE_DECLARATION ::=
4706 -- task type DEFINING_IDENTIFIER [KNOWN_DISCRIMINANT_PART]
4707 -- [is [new INTERFACE_LIST with] TASK_DEFINITION];
4709 -- N_Task_Type_Declaration
4710 -- Sloc points to TASK
4711 -- Defining_Identifier (Node1)
4712 -- Discriminant_Specifications (List4) (set to No_List if no
4713 -- discriminant part)
4714 -- Interface_List (List2) (set to No_List if none)
4715 -- Task_Definition (Node3) (set to Empty if not present)
4716 -- Corresponding_Body (Node5-Sem)
4718 ----------------------------------
4719 -- 9.1 Single Task Declaration --
4720 ----------------------------------
4722 -- SINGLE_TASK_DECLARATION ::=
4723 -- task DEFINING_IDENTIFIER
4724 -- [is [new INTERFACE_LIST with] TASK_DEFINITION];
4726 -- N_Single_Task_Declaration
4727 -- Sloc points to TASK
4728 -- Defining_Identifier (Node1)
4729 -- Interface_List (List2) (set to No_List if none)
4730 -- Task_Definition (Node3) (set to Empty if not present)
4732 --------------------------
4733 -- 9.1 Task Definition --
4734 --------------------------
4736 -- TASK_DEFINITION ::=
4740 -- end [task_IDENTIFIER]
4742 -- Note: as a result of semantic analysis, the list of task items can
4743 -- include implicit type declarations resulting from entry families.
4745 -- N_Task_Definition
4746 -- Sloc points to first token of task definition
4747 -- Visible_Declarations (List2)
4748 -- Private_Declarations (List3) (set to No_List if no private part)
4749 -- End_Label (Node4)
4750 -- Has_Priority_Pragma (Flag6-Sem)
4751 -- Has_Storage_Size_Pragma (Flag5-Sem)
4752 -- Has_Task_Info_Pragma (Flag7-Sem)
4753 -- Has_Task_Name_Pragma (Flag8-Sem)
4754 -- Has_Relative_Deadline_Pragma (Flag9-Sem)
4756 --------------------
4758 --------------------
4760 -- TASK_ITEM ::= ENTRY_DECLARATION | REPRESENTATION_CLAUSE
4762 --------------------
4764 --------------------
4767 -- task body task_DEFINING_IDENTIFIER is
4770 -- HANDLED_SEQUENCE_OF_STATEMENTS
4771 -- end [task_IDENTIFIER];
4773 -- Gigi restriction: This node never appears
4776 -- Sloc points to TASK
4777 -- Defining_Identifier (Node1)
4778 -- Declarations (List2)
4779 -- Handled_Statement_Sequence (Node4)
4780 -- Is_Task_Master (Flag5-Sem)
4781 -- Activation_Chain_Entity (Node3-Sem)
4782 -- Corresponding_Spec (Node5-Sem)
4783 -- Was_Originally_Stub (Flag13-Sem)
4785 -------------------------------------
4786 -- 9.4 Protected Type Declaration --
4787 -------------------------------------
4789 -- PROTECTED_TYPE_DECLARATION ::=
4790 -- protected type DEFINING_IDENTIFIER [KNOWN_DISCRIMINANT_PART]
4791 -- is [new INTERFACE_LIST with] PROTECTED_DEFINITION;
4793 -- Note: protected type declarations are not permitted in Ada 83 mode
4795 -- N_Protected_Type_Declaration
4796 -- Sloc points to PROTECTED
4797 -- Defining_Identifier (Node1)
4798 -- Discriminant_Specifications (List4) (set to No_List if no
4799 -- discriminant part)
4800 -- Interface_List (List2) (set to No_List if none)
4801 -- Protected_Definition (Node3)
4802 -- Corresponding_Body (Node5-Sem)
4804 ---------------------------------------
4805 -- 9.4 Single Protected Declaration --
4806 ---------------------------------------
4808 -- SINGLE_PROTECTED_DECLARATION ::=
4809 -- protected DEFINING_IDENTIFIER
4810 -- is [new INTERFACE_LIST with] PROTECTED_DEFINITION;
4812 -- Note: single protected declarations are not allowed in Ada 83 mode
4814 -- N_Single_Protected_Declaration
4815 -- Sloc points to PROTECTED
4816 -- Defining_Identifier (Node1)
4817 -- Interface_List (List2) (set to No_List if none)
4818 -- Protected_Definition (Node3)
4820 -------------------------------
4821 -- 9.4 Protected Definition --
4822 -------------------------------
4824 -- PROTECTED_DEFINITION ::=
4825 -- {PROTECTED_OPERATION_DECLARATION}
4827 -- {PROTECTED_ELEMENT_DECLARATION}]
4828 -- end [protected_IDENTIFIER]
4830 -- N_Protected_Definition
4831 -- Sloc points to first token of protected definition
4832 -- Visible_Declarations (List2)
4833 -- Private_Declarations (List3) (set to No_List if no private part)
4834 -- End_Label (Node4)
4835 -- Has_Priority_Pragma (Flag6-Sem)
4837 ------------------------------------------
4838 -- 9.4 Protected Operation Declaration --
4839 ------------------------------------------
4841 -- PROTECTED_OPERATION_DECLARATION ::=
4842 -- SUBPROGRAM_DECLARATION
4843 -- | ENTRY_DECLARATION
4844 -- | REPRESENTATION_CLAUSE
4846 ----------------------------------------
4847 -- 9.4 Protected Element Declaration --
4848 ----------------------------------------
4850 -- PROTECTED_ELEMENT_DECLARATION ::=
4851 -- PROTECTED_OPERATION_DECLARATION | COMPONENT_DECLARATION
4853 -------------------------
4854 -- 9.4 Protected Body --
4855 -------------------------
4857 -- PROTECTED_BODY ::=
4858 -- protected body DEFINING_IDENTIFIER is
4859 -- {PROTECTED_OPERATION_ITEM}
4860 -- end [protected_IDENTIFIER];
4862 -- Note: protected bodies are not allowed in Ada 83 mode
4864 -- Gigi restriction: This node never appears
4867 -- Sloc points to PROTECTED
4868 -- Defining_Identifier (Node1)
4869 -- Declarations (List2) protected operation items (and pragmas)
4870 -- End_Label (Node4)
4871 -- Corresponding_Spec (Node5-Sem)
4872 -- Was_Originally_Stub (Flag13-Sem)
4874 -----------------------------------
4875 -- 9.4 Protected Operation Item --
4876 -----------------------------------
4878 -- PROTECTED_OPERATION_ITEM ::=
4879 -- SUBPROGRAM_DECLARATION
4880 -- | SUBPROGRAM_BODY
4882 -- | REPRESENTATION_CLAUSE
4884 ------------------------------
4885 -- 9.5.2 Entry Declaration --
4886 ------------------------------
4888 -- ENTRY_DECLARATION ::=
4889 -- [[not] overriding]
4890 -- entry DEFINING_IDENTIFIER
4891 -- [(DISCRETE_SUBTYPE_DEFINITION)] PARAMETER_PROFILE;
4893 -- N_Entry_Declaration
4894 -- Sloc points to ENTRY
4895 -- Defining_Identifier (Node1)
4896 -- Discrete_Subtype_Definition (Node4) (set to Empty if not present)
4897 -- Parameter_Specifications (List3) (set to No_List if no formal part)
4898 -- Corresponding_Body (Node5-Sem)
4899 -- Must_Override (Flag14) set if overriding indicator present
4900 -- Must_Not_Override (Flag15) set if not_overriding indicator present
4902 -- Note: overriding indicator is an Ada 2005 feature
4904 -----------------------------
4905 -- 9.5.2 Accept statement --
4906 -----------------------------
4908 -- ACCEPT_STATEMENT ::=
4909 -- accept entry_DIRECT_NAME
4910 -- [(ENTRY_INDEX)] PARAMETER_PROFILE [do
4911 -- HANDLED_SEQUENCE_OF_STATEMENTS
4912 -- end [entry_IDENTIFIER]];
4914 -- Gigi restriction: This node never appears
4916 -- Note: there are no explicit declarations allowed in an accept
4917 -- statement. However, the implicit declarations for any statement
4918 -- identifiers (labels and block/loop identifiers) are declarations
4919 -- that belong logically to the accept statement, and that is why
4920 -- there is a Declarations field in this node.
4922 -- N_Accept_Statement
4923 -- Sloc points to ACCEPT
4924 -- Entry_Direct_Name (Node1)
4925 -- Entry_Index (Node5) (set to Empty if not present)
4926 -- Parameter_Specifications (List3) (set to No_List if no formal part)
4927 -- Handled_Statement_Sequence (Node4)
4928 -- Declarations (List2) (set to No_List if no declarations)
4930 ------------------------
4931 -- 9.5.2 Entry Index --
4932 ------------------------
4934 -- ENTRY_INDEX ::= EXPRESSION
4936 -----------------------
4937 -- 9.5.2 Entry Body --
4938 -----------------------
4941 -- entry DEFINING_IDENTIFIER ENTRY_BODY_FORMAL_PART ENTRY_BARRIER is
4944 -- HANDLED_SEQUENCE_OF_STATEMENTS
4945 -- end [entry_IDENTIFIER];
4947 -- ENTRY_BARRIER ::= when CONDITION
4949 -- Note: we store the CONDITION of the ENTRY_BARRIER in the node for
4950 -- the ENTRY_BODY_FORMAL_PART to avoid the N_Entry_Body node getting
4951 -- too full (it would otherwise have too many fields)
4953 -- Gigi restriction: This node never appears
4956 -- Sloc points to ENTRY
4957 -- Defining_Identifier (Node1)
4958 -- Entry_Body_Formal_Part (Node5)
4959 -- Declarations (List2)
4960 -- Handled_Statement_Sequence (Node4)
4961 -- Activation_Chain_Entity (Node3-Sem)
4963 -----------------------------------
4964 -- 9.5.2 Entry Body Formal Part --
4965 -----------------------------------
4967 -- ENTRY_BODY_FORMAL_PART ::=
4968 -- [(ENTRY_INDEX_SPECIFICATION)] PARAMETER_PROFILE
4970 -- Note that an entry body formal part node is present even if it is
4971 -- empty. This reflects the grammar, in which it is the components of
4972 -- the entry body formal part that are optional, not the entry body
4973 -- formal part itself. Also this means that the barrier condition
4974 -- always has somewhere to be stored.
4976 -- Gigi restriction: This node never appears
4978 -- N_Entry_Body_Formal_Part
4979 -- Sloc points to first token
4980 -- Entry_Index_Specification (Node4) (set to Empty if not present)
4981 -- Parameter_Specifications (List3) (set to No_List if no formal part)
4982 -- Condition (Node1) from entry barrier of entry body
4984 --------------------------
4985 -- 9.5.2 Entry Barrier --
4986 --------------------------
4988 -- ENTRY_BARRIER ::= when CONDITION
4990 --------------------------------------
4991 -- 9.5.2 Entry Index Specification --
4992 --------------------------------------
4994 -- ENTRY_INDEX_SPECIFICATION ::=
4995 -- for DEFINING_IDENTIFIER in DISCRETE_SUBTYPE_DEFINITION
4997 -- Gigi restriction: This node never appears
4999 -- N_Entry_Index_Specification
5000 -- Sloc points to FOR
5001 -- Defining_Identifier (Node1)
5002 -- Discrete_Subtype_Definition (Node4)
5004 ---------------------------------
5005 -- 9.5.3 Entry Call Statement --
5006 ---------------------------------
5008 -- ENTRY_CALL_STATEMENT ::= entry_NAME [ACTUAL_PARAMETER_PART];
5010 -- The parser may generate a procedure call for this construct. The
5011 -- semantic pass must correct this misidentification where needed.
5013 -- Gigi restriction: This node never appears
5015 -- N_Entry_Call_Statement
5016 -- Sloc points to first token of name
5018 -- Parameter_Associations (List3) (set to No_List if no
5019 -- actual parameter part)
5020 -- First_Named_Actual (Node4-Sem)
5022 ------------------------------
5023 -- 9.5.4 Requeue Statement --
5024 ------------------------------
5026 -- REQUEUE_STATEMENT ::= requeue entry_NAME [with abort];
5028 -- Note: requeue statements are not permitted in Ada 83 mode
5030 -- Gigi restriction: This node never appears
5032 -- N_Requeue_Statement
5033 -- Sloc points to REQUEUE
5035 -- Abort_Present (Flag15)
5037 --------------------------
5038 -- 9.6 Delay Statement --
5039 --------------------------
5041 -- DELAY_STATEMENT ::=
5042 -- DELAY_UNTIL_STATEMENT
5043 -- | DELAY_RELATIVE_STATEMENT
5045 --------------------------------
5046 -- 9.6 Delay Until Statement --
5047 --------------------------------
5049 -- DELAY_UNTIL_STATEMENT ::= delay until delay_EXPRESSION;
5051 -- Note: delay until statements are not permitted in Ada 83 mode
5053 -- Gigi restriction: This node never appears
5055 -- N_Delay_Until_Statement
5056 -- Sloc points to DELAY
5057 -- Expression (Node3)
5059 -----------------------------------
5060 -- 9.6 Delay Relative Statement --
5061 -----------------------------------
5063 -- DELAY_RELATIVE_STATEMENT ::= delay delay_EXPRESSION;
5065 -- Gigi restriction: This node never appears
5067 -- N_Delay_Relative_Statement
5068 -- Sloc points to DELAY
5069 -- Expression (Node3)
5071 ---------------------------
5072 -- 9.7 Select Statement --
5073 ---------------------------
5075 -- SELECT_STATEMENT ::=
5077 -- | TIMED_ENTRY_CALL
5078 -- | CONDITIONAL_ENTRY_CALL
5079 -- | ASYNCHRONOUS_SELECT
5081 -----------------------------
5082 -- 9.7.1 Selective Accept --
5083 -----------------------------
5085 -- SELECTIVE_ACCEPT ::=
5088 -- SELECT_ALTERNATIVE
5091 -- SELECT_ALTERNATIVE}
5093 -- SEQUENCE_OF_STATEMENTS]
5096 -- Gigi restriction: This node never appears
5098 -- Note: the guard expression, if present, appears in the node for
5099 -- the select alternative.
5101 -- N_Selective_Accept
5102 -- Sloc points to SELECT
5103 -- Select_Alternatives (List1)
5104 -- Else_Statements (List4) (set to No_List if no else part)
5110 -- GUARD ::= when CONDITION =>
5112 -- As noted above, the CONDITION that is part of a GUARD is included
5113 -- in the node for the select alternative for convenience.
5115 -------------------------------
5116 -- 9.7.1 Select Alternative --
5117 -------------------------------
5119 -- SELECT_ALTERNATIVE ::=
5120 -- ACCEPT_ALTERNATIVE
5121 -- | DELAY_ALTERNATIVE
5122 -- | TERMINATE_ALTERNATIVE
5124 -------------------------------
5125 -- 9.7.1 Accept Alternative --
5126 -------------------------------
5128 -- ACCEPT_ALTERNATIVE ::=
5129 -- ACCEPT_STATEMENT [SEQUENCE_OF_STATEMENTS]
5131 -- Gigi restriction: This node never appears
5133 -- N_Accept_Alternative
5134 -- Sloc points to ACCEPT
5135 -- Accept_Statement (Node2)
5136 -- Condition (Node1) from the guard (set to Empty if no guard present)
5137 -- Statements (List3) (set to Empty_List if no statements)
5138 -- Pragmas_Before (List4) pragmas before alt (set to No_List if none)
5139 -- Accept_Handler_Records (List5-Sem)
5141 ------------------------------
5142 -- 9.7.1 Delay Alternative --
5143 ------------------------------
5145 -- DELAY_ALTERNATIVE ::=
5146 -- DELAY_STATEMENT [SEQUENCE_OF_STATEMENTS]
5148 -- Gigi restriction: This node never appears
5150 -- N_Delay_Alternative
5151 -- Sloc points to DELAY
5152 -- Delay_Statement (Node2)
5153 -- Condition (Node1) from the guard (set to Empty if no guard present)
5154 -- Statements (List3) (set to Empty_List if no statements)
5155 -- Pragmas_Before (List4) pragmas before alt (set to No_List if none)
5157 ----------------------------------
5158 -- 9.7.1 Terminate Alternative --
5159 ----------------------------------
5161 -- TERMINATE_ALTERNATIVE ::= terminate;
5163 -- Gigi restriction: This node never appears
5165 -- N_Terminate_Alternative
5166 -- Sloc points to TERMINATE
5167 -- Condition (Node1) from the guard (set to Empty if no guard present)
5168 -- Pragmas_Before (List4) pragmas before alt (set to No_List if none)
5169 -- Pragmas_After (List5) pragmas after alt (set to No_List if none)
5171 -----------------------------
5172 -- 9.7.2 Timed Entry Call --
5173 -----------------------------
5175 -- TIMED_ENTRY_CALL ::=
5177 -- ENTRY_CALL_ALTERNATIVE
5179 -- DELAY_ALTERNATIVE
5182 -- Gigi restriction: This node never appears
5184 -- N_Timed_Entry_Call
5185 -- Sloc points to SELECT
5186 -- Entry_Call_Alternative (Node1)
5187 -- Delay_Alternative (Node4)
5189 -----------------------------------
5190 -- 9.7.2 Entry Call Alternative --
5191 -----------------------------------
5193 -- ENTRY_CALL_ALTERNATIVE ::=
5194 -- PROCEDURE_OR_ENTRY_CALL [SEQUENCE_OF_STATEMENTS]
5196 -- PROCEDURE_OR_ENTRY_CALL ::=
5197 -- PROCEDURE_CALL_STATEMENT | ENTRY_CALL_STATEMENT
5199 -- Gigi restriction: This node never appears
5201 -- N_Entry_Call_Alternative
5202 -- Sloc points to first token of entry call statement
5203 -- Entry_Call_Statement (Node1)
5204 -- Statements (List3) (set to Empty_List if no statements)
5205 -- Pragmas_Before (List4) pragmas before alt (set to No_List if none)
5207 -----------------------------------
5208 -- 9.7.3 Conditional Entry Call --
5209 -----------------------------------
5211 -- CONDITIONAL_ENTRY_CALL ::=
5213 -- ENTRY_CALL_ALTERNATIVE
5215 -- SEQUENCE_OF_STATEMENTS
5218 -- Gigi restriction: This node never appears
5220 -- N_Conditional_Entry_Call
5221 -- Sloc points to SELECT
5222 -- Entry_Call_Alternative (Node1)
5223 -- Else_Statements (List4)
5225 --------------------------------
5226 -- 9.7.4 Asynchronous Select --
5227 --------------------------------
5229 -- ASYNCHRONOUS_SELECT ::=
5231 -- TRIGGERING_ALTERNATIVE
5236 -- Note: asynchronous select is not permitted in Ada 83 mode
5238 -- Gigi restriction: This node never appears
5240 -- N_Asynchronous_Select
5241 -- Sloc points to SELECT
5242 -- Triggering_Alternative (Node1)
5243 -- Abortable_Part (Node2)
5245 -----------------------------------
5246 -- 9.7.4 Triggering Alternative --
5247 -----------------------------------
5249 -- TRIGGERING_ALTERNATIVE ::=
5250 -- TRIGGERING_STATEMENT [SEQUENCE_OF_STATEMENTS]
5252 -- Gigi restriction: This node never appears
5254 -- N_Triggering_Alternative
5255 -- Sloc points to first token of triggering statement
5256 -- Triggering_Statement (Node1)
5257 -- Statements (List3) (set to Empty_List if no statements)
5258 -- Pragmas_Before (List4) pragmas before alt (set to No_List if none)
5260 ---------------------------------
5261 -- 9.7.4 Triggering Statement --
5262 ---------------------------------
5264 -- TRIGGERING_STATEMENT ::= PROCEDURE_OR_ENTRY_CALL | DELAY_STATEMENT
5266 ---------------------------
5267 -- 9.7.4 Abortable Part --
5268 ---------------------------
5270 -- ABORTABLE_PART ::= SEQUENCE_OF_STATEMENTS
5272 -- Gigi restriction: This node never appears
5275 -- Sloc points to ABORT
5276 -- Statements (List3)
5278 --------------------------
5279 -- 9.8 Abort Statement --
5280 --------------------------
5282 -- ABORT_STATEMENT ::= abort task_NAME {, task_NAME};
5284 -- Gigi restriction: This node never appears
5286 -- N_Abort_Statement
5287 -- Sloc points to ABORT
5290 -------------------------
5291 -- 10.1.1 Compilation --
5292 -------------------------
5294 -- COMPILATION ::= {COMPILATION_UNIT}
5296 -- There is no explicit node in the tree for a compilation, since in
5297 -- general the compiler is processing only a single compilation unit
5298 -- at a time. It is possible to parse multiple units in syntax check
5299 -- only mode, but they the trees are discarded in any case.
5301 ------------------------------
5302 -- 10.1.1 Compilation Unit --
5303 ------------------------------
5305 -- COMPILATION_UNIT ::=
5306 -- CONTEXT_CLAUSE LIBRARY_ITEM
5307 -- | CONTEXT_CLAUSE SUBUNIT
5309 -- The N_Compilation_Unit node itself represents the above syntax.
5310 -- However, there are two additional items not reflected in the above
5311 -- syntax. First we have the global declarations that are added by the
5312 -- code generator. These are outer level declarations (so they cannot
5313 -- be represented as being inside the units). An example is the wrapper
5314 -- subprograms that are created to do ABE checking. As always a list of
5315 -- declarations can contain actions as well (i.e. statements), and such
5316 -- statements are executed as part of the elaboration of the unit. Note
5317 -- that all such declarations are elaborated before the library unit.
5319 -- Similarly, certain actions need to be elaborated at the completion
5320 -- of elaboration of the library unit (notably the statement that sets
5321 -- the Boolean flag indicating that elaboration is complete).
5323 -- The third item not reflected in the syntax is pragmas that appear
5324 -- after the compilation unit. As always pragmas are a problem since
5325 -- they are not part of the formal syntax, but can be stuck into the
5326 -- source following a set of ad hoc rules, and we have to find an ad
5327 -- hoc way of sticking them into the tree. For pragmas that appear
5328 -- before the library unit, we just consider them to be part of the
5329 -- context clause, and pragmas can appear in the Context_Items list
5330 -- of the compilation unit. However, pragmas can also appear after
5331 -- the library item.
5333 -- To deal with all these problems, we create an auxiliary node for
5334 -- a compilation unit, referenced from the N_Compilation_Unit node
5335 -- that contains these three items.
5337 -- N_Compilation_Unit
5338 -- Sloc points to first token of defining unit name
5339 -- Library_Unit (Node4-Sem) corresponding/parent spec/body
5340 -- Context_Items (List1) context items and pragmas preceding unit
5341 -- Private_Present (Flag15) set if library unit has private keyword
5342 -- Unit (Node2) library item or subunit
5343 -- Aux_Decls_Node (Node5) points to the N_Compilation_Unit_Aux node
5344 -- Has_No_Elaboration_Code (Flag17-Sem)
5345 -- Body_Required (Flag13-Sem) set for spec if body is required
5346 -- Acts_As_Spec (Flag4-Sem) flag for subprogram body with no spec
5347 -- First_Inlined_Subprogram (Node3-Sem)
5349 -- N_Compilation_Unit_Aux
5350 -- Sloc is a copy of the Sloc from the N_Compilation_Unit node
5351 -- Declarations (List2) (set to No_List if no global declarations)
5352 -- Actions (List1) (set to No_List if no actions)
5353 -- Pragmas_After (List5) pragmas after unit (set to No_List if none)
5354 -- Config_Pragmas (List4) config pragmas (set to Empty_List if none)
5356 --------------------------
5357 -- 10.1.1 Library Item --
5358 --------------------------
5361 -- [private] LIBRARY_UNIT_DECLARATION
5362 -- | LIBRARY_UNIT_BODY
5363 -- | [private] LIBRARY_UNIT_RENAMING_DECLARATION
5365 -- Note: PRIVATE is not allowed in Ada 83 mode
5367 -- There is no explicit node in the tree for library item, instead
5368 -- the declaration or body, and the flag for private if present,
5369 -- appear in the N_Compilation_Unit clause.
5371 --------------------------------------
5372 -- 10.1.1 Library Unit Declaration --
5373 --------------------------------------
5375 -- LIBRARY_UNIT_DECLARATION ::=
5376 -- SUBPROGRAM_DECLARATION | PACKAGE_DECLARATION
5377 -- | GENERIC_DECLARATION | GENERIC_INSTANTIATION
5379 -----------------------------------------------
5380 -- 10.1.1 Library Unit Renaming Declaration --
5381 -----------------------------------------------
5383 -- LIBRARY_UNIT_RENAMING_DECLARATION ::=
5384 -- PACKAGE_RENAMING_DECLARATION
5385 -- | GENERIC_RENAMING_DECLARATION
5386 -- | SUBPROGRAM_RENAMING_DECLARATION
5388 -------------------------------
5389 -- 10.1.1 Library unit body --
5390 -------------------------------
5392 -- LIBRARY_UNIT_BODY ::= SUBPROGRAM_BODY | PACKAGE_BODY
5394 ------------------------------
5395 -- 10.1.1 Parent Unit Name --
5396 ------------------------------
5398 -- PARENT_UNIT_NAME ::= NAME
5400 ----------------------------
5401 -- 10.1.2 Context clause --
5402 ----------------------------
5404 -- CONTEXT_CLAUSE ::= {CONTEXT_ITEM}
5406 -- The context clause can include pragmas, and any pragmas that appear
5407 -- before the context clause proper (i.e. all configuration pragmas,
5408 -- also appear at the front of this list).
5410 --------------------------
5411 -- 10.1.2 Context_Item --
5412 --------------------------
5414 -- CONTEXT_ITEM ::= WITH_CLAUSE | USE_CLAUSE | WITH_TYPE_CLAUSE
5416 -------------------------
5417 -- 10.1.2 With clause --
5418 -------------------------
5421 -- with library_unit_NAME {,library_unit_NAME};
5423 -- A separate With clause is built for each name, so that we have
5424 -- a Corresponding_Spec field for each with'ed spec. The flags
5425 -- First_Name and Last_Name are used to reconstruct the exact
5426 -- source form. When a list of names appears in one with clause,
5427 -- the first name in the list has First_Name set, and the last
5428 -- has Last_Name set. If the with clause has only one name, then
5429 -- both of the flags First_Name and Last_Name are set in this name.
5431 -- Note: in the case of implicit with's that are installed by the
5432 -- Rtsfind routine, Implicit_With is set, and the Sloc is typically
5433 -- set to Standard_Location, but it is incorrect to test the Sloc
5434 -- to find out if a with clause is implicit, test the flag instead.
5437 -- Sloc points to first token of library unit name
5439 -- Library_Unit (Node4-Sem)
5440 -- Corresponding_Spec (Node5-Sem)
5441 -- First_Name (Flag5) (set to True if first name or only one name)
5442 -- Last_Name (Flag6) (set to True if last name or only one name)
5443 -- Context_Installed (Flag13-Sem)
5444 -- Elaborate_Present (Flag4-Sem)
5445 -- Elaborate_All_Present (Flag14-Sem)
5446 -- Elaborate_All_Desirable (Flag9-Sem)
5447 -- Elaborate_Desirable (Flag11-Sem)
5448 -- Private_Present (Flag15) set if with_clause has private keyword
5449 -- Implicit_With (Flag16-Sem)
5450 -- Limited_Present (Flag17) set if LIMITED is present
5451 -- Limited_View_Installed (Flag18-Sem)
5452 -- Unreferenced_In_Spec (Flag7-Sem)
5453 -- No_Entities_Ref_In_Spec (Flag8-Sem)
5455 -- Note: Limited_Present and Limited_View_Installed give support to
5456 -- Ada 2005 (AI-50217).
5457 -- Similarly, Private_Present gives support to AI-50262.
5459 ----------------------
5460 -- With_Type clause --
5461 ----------------------
5463 -- This is a GNAT extension, used to implement mutually recursive
5464 -- types declared in different packages.
5465 -- Note: this is now obsolete. The functionality of this construct
5466 -- is now implemented by the Ada 2005 Limited_with_Clause.
5468 ---------------------
5469 -- 10.2 Body stub --
5470 ---------------------
5473 -- SUBPROGRAM_BODY_STUB
5474 -- | PACKAGE_BODY_STUB
5476 -- | PROTECTED_BODY_STUB
5478 ----------------------------------
5479 -- 10.1.3 Subprogram Body Stub --
5480 ----------------------------------
5482 -- SUBPROGRAM_BODY_STUB ::=
5483 -- SUBPROGRAM_SPECIFICATION is separate;
5485 -- N_Subprogram_Body_Stub
5486 -- Sloc points to FUNCTION or PROCEDURE
5487 -- Specification (Node1)
5488 -- Library_Unit (Node4-Sem) points to the subunit
5489 -- Corresponding_Body (Node5-Sem)
5491 -------------------------------
5492 -- 10.1.3 Package Body Stub --
5493 -------------------------------
5495 -- PACKAGE_BODY_STUB ::=
5496 -- package body DEFINING_IDENTIFIER is separate;
5498 -- N_Package_Body_Stub
5499 -- Sloc points to PACKAGE
5500 -- Defining_Identifier (Node1)
5501 -- Library_Unit (Node4-Sem) points to the subunit
5502 -- Corresponding_Body (Node5-Sem)
5504 ----------------------------
5505 -- 10.1.3 Task Body Stub --
5506 ----------------------------
5508 -- TASK_BODY_STUB ::=
5509 -- task body DEFINING_IDENTIFIER is separate;
5512 -- Sloc points to TASK
5513 -- Defining_Identifier (Node1)
5514 -- Library_Unit (Node4-Sem) points to the subunit
5515 -- Corresponding_Body (Node5-Sem)
5517 ---------------------------------
5518 -- 10.1.3 Protected Body Stub --
5519 ---------------------------------
5521 -- PROTECTED_BODY_STUB ::=
5522 -- protected body DEFINING_IDENTIFIER is separate;
5524 -- Note: protected body stubs are not allowed in Ada 83 mode
5526 -- N_Protected_Body_Stub
5527 -- Sloc points to PROTECTED
5528 -- Defining_Identifier (Node1)
5529 -- Library_Unit (Node4-Sem) points to the subunit
5530 -- Corresponding_Body (Node5-Sem)
5532 ---------------------
5533 -- 10.1.3 Subunit --
5534 ---------------------
5536 -- SUBUNIT ::= separate (PARENT_UNIT_NAME) PROPER_BODY
5539 -- Sloc points to SEPARATE
5540 -- Name (Node2) is the name of the parent unit
5541 -- Proper_Body (Node1) is the subunit body
5542 -- Corresponding_Stub (Node3-Sem) is the stub declaration for the unit.
5544 ---------------------------------
5545 -- 11.1 Exception Declaration --
5546 ---------------------------------
5548 -- EXCEPTION_DECLARATION ::= DEFINING_IDENTIFIER_LIST : exception;
5550 -- For consistency with object declarations etc., the parser converts
5551 -- the case of multiple identifiers being declared to a series of
5552 -- declarations in which the expression is copied, using the More_Ids
5553 -- and Prev_Ids flags to remember the source form as described in the
5554 -- section on "Handling of Defining Identifier Lists".
5556 -- N_Exception_Declaration
5557 -- Sloc points to EXCEPTION
5558 -- Defining_Identifier (Node1)
5559 -- Expression (Node3-Sem)
5560 -- Renaming_Exception (Node2-Sem)
5561 -- More_Ids (Flag5) (set to False if no more identifiers in list)
5562 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
5564 ------------------------------------------
5565 -- 11.2 Handled Sequence Of Statements --
5566 ------------------------------------------
5568 -- HANDLED_SEQUENCE_OF_STATEMENTS ::=
5569 -- SEQUENCE_OF_STATEMENTS
5571 -- EXCEPTION_HANDLER
5572 -- {EXCEPTION_HANDLER}]
5574 -- cleanup_procedure_call (param, param, param, ...);]
5576 -- The AT END phrase is a GNAT extension to provide for cleanups. It is
5577 -- used only internally currently, but is considered to be syntactic.
5578 -- At the moment, the only cleanup action allowed is a single call to
5579 -- a parameterless procedure, and the Identifier field of the node is
5580 -- the procedure to be called. Also there is a current restriction
5581 -- that exception handles and a cleanup cannot be present in the same
5582 -- frame, so at least one of Exception_Handlers or the Identifier must
5585 -- Actually, more accurately, this restriction applies to the original
5586 -- source program. In the expanded tree, if the At_End_Proc field is
5587 -- present, then there will also be an exception handler of the form:
5589 -- when all others =>
5593 -- where cleanup is the procedure to be generated. The reason we do
5594 -- this is so that the front end can handle the necessary entries in
5595 -- the exception tables, and other exception handler actions required
5596 -- as part of the normal handling for exception handlers.
5598 -- The AT END cleanup handler protects only the sequence of statements
5599 -- (not the associated declarations of the parent), just like exception
5600 -- handlers. The big difference is that the cleanup procedure is called
5601 -- on either a normal or an abnormal exit from the statement sequence.
5603 -- Note: the list of Exception_Handlers can contain pragmas as well
5604 -- as actual handlers. In practice these pragmas can only occur at
5605 -- the start of the list, since any pragmas occurring later on will
5606 -- be included in the statement list of the corresponding handler.
5608 -- Note: although in the Ada syntax, the sequence of statements in
5609 -- a handled sequence of statements can only contain statements, we
5610 -- allow free mixing of declarations and statements in the resulting
5611 -- expanded tree. This is for example used to deal with the case of
5612 -- a cleanup procedure that must handle declarations as well as the
5613 -- statements of a block.
5615 -- N_Handled_Sequence_Of_Statements
5616 -- Sloc points to first token of first statement
5617 -- Statements (List3)
5618 -- End_Label (Node4) (set to Empty if expander generated)
5619 -- Exception_Handlers (List5) (set to No_List if none present)
5620 -- At_End_Proc (Node1) (set to Empty if no clean up procedure)
5621 -- First_Real_Statement (Node2-Sem)
5622 -- Zero_Cost_Handling (Flag5-Sem)
5624 -- Note: the parent always contains a Declarations field which contains
5625 -- declarations associated with the handled sequence of statements. This
5626 -- is true even in the case of an accept statement (see description of
5627 -- the N_Accept_Statement node).
5629 -- End_Label refers to the containing construct
5631 -----------------------------
5632 -- 11.2 Exception Handler --
5633 -----------------------------
5635 -- EXCEPTION_HANDLER ::=
5636 -- when [CHOICE_PARAMETER_SPECIFICATION :]
5637 -- EXCEPTION_CHOICE {| EXCEPTION_CHOICE} =>
5638 -- SEQUENCE_OF_STATEMENTS
5640 -- Note: choice parameter specification is not allowed in Ada 83 mode
5642 -- N_Exception_Handler
5643 -- Sloc points to WHEN
5644 -- Choice_Parameter (Node2) (set to Empty if not present)
5645 -- Exception_Choices (List4)
5646 -- Statements (List3)
5647 -- Exception_Label (Node5-Sem) (set to Empty of not present)
5648 -- Zero_Cost_Handling (Flag5-Sem)
5649 -- Local_Raise_Statements (Elist1-Sem) (set to No_Elist if not present)
5650 -- Local_Raise_Not_OK (Flag7-Sem)
5651 -- Has_Local_Raise (Flag8-Sem)
5653 ------------------------------------------
5654 -- 11.2 Choice parameter specification --
5655 ------------------------------------------
5657 -- CHOICE_PARAMETER_SPECIFICATION ::= DEFINING_IDENTIFIER
5659 ----------------------------
5660 -- 11.2 Exception Choice --
5661 ----------------------------
5663 -- EXCEPTION_CHOICE ::= exception_NAME | others
5665 -- Except in the case of OTHERS, no explicit node appears in the tree
5666 -- for exception choice. Instead the exception name appears directly.
5667 -- An OTHERS choice is represented by a N_Others_Choice node (see
5670 -- Note: for the exception choice created for an at end handler, the
5671 -- exception choice is an N_Others_Choice node with All_Others set.
5673 ---------------------------
5674 -- 11.3 Raise Statement --
5675 ---------------------------
5677 -- RAISE_STATEMENT ::= raise [exception_NAME];
5679 -- In Ada 2005, we have
5681 -- RAISE_STATEMENT ::= raise; | raise exception_NAME [with EXPRESSION];
5683 -- N_Raise_Statement
5684 -- Sloc points to RAISE
5685 -- Name (Node2) (set to Empty if no exception name present)
5686 -- Expression (Node3) (set to Empty if no expression present)
5687 -- From_At_End (Flag4-Sem)
5689 -------------------------------
5690 -- 12.1 Generic Declaration --
5691 -------------------------------
5693 -- GENERIC_DECLARATION ::=
5694 -- GENERIC_SUBPROGRAM_DECLARATION | GENERIC_PACKAGE_DECLARATION
5696 ------------------------------------------
5697 -- 12.1 Generic Subprogram Declaration --
5698 ------------------------------------------
5700 -- GENERIC_SUBPROGRAM_DECLARATION ::=
5701 -- GENERIC_FORMAL_PART SUBPROGRAM_SPECIFICATION;
5703 -- Note: Generic_Formal_Declarations can include pragmas
5705 -- N_Generic_Subprogram_Declaration
5706 -- Sloc points to GENERIC
5707 -- Specification (Node1) subprogram specification
5708 -- Corresponding_Body (Node5-Sem)
5709 -- Generic_Formal_Declarations (List2) from generic formal part
5710 -- Parent_Spec (Node4-Sem)
5712 ---------------------------------------
5713 -- 12.1 Generic Package Declaration --
5714 ---------------------------------------
5716 -- GENERIC_PACKAGE_DECLARATION ::=
5717 -- GENERIC_FORMAL_PART PACKAGE_SPECIFICATION;
5719 -- Note: when we do generics right, the Activation_Chain_Entity entry
5720 -- for this node can be removed (since the expander won't see generic
5721 -- units any more)???.
5723 -- Note: Generic_Formal_Declarations can include pragmas
5725 -- N_Generic_Package_Declaration
5726 -- Sloc points to GENERIC
5727 -- Specification (Node1) package specification
5728 -- Corresponding_Body (Node5-Sem)
5729 -- Generic_Formal_Declarations (List2) from generic formal part
5730 -- Parent_Spec (Node4-Sem)
5731 -- Activation_Chain_Entity (Node3-Sem)
5733 -------------------------------
5734 -- 12.1 Generic Formal Part --
5735 -------------------------------
5737 -- GENERIC_FORMAL_PART ::=
5738 -- generic {GENERIC_FORMAL_PARAMETER_DECLARATION | USE_CLAUSE}
5740 ------------------------------------------------
5741 -- 12.1 Generic Formal Parameter Declaration --
5742 ------------------------------------------------
5744 -- GENERIC_FORMAL_PARAMETER_DECLARATION ::=
5745 -- FORMAL_OBJECT_DECLARATION
5746 -- | FORMAL_TYPE_DECLARATION
5747 -- | FORMAL_SUBPROGRAM_DECLARATION
5748 -- | FORMAL_PACKAGE_DECLARATION
5750 ---------------------------------
5751 -- 12.3 Generic Instantiation --
5752 ---------------------------------
5754 -- GENERIC_INSTANTIATION ::=
5755 -- package DEFINING_PROGRAM_UNIT_NAME is
5756 -- new generic_package_NAME [GENERIC_ACTUAL_PART];
5757 -- | [[not] overriding]
5758 -- procedure DEFINING_PROGRAM_UNIT_NAME is
5759 -- new generic_procedure_NAME [GENERIC_ACTUAL_PART];
5760 -- | [[not] overriding]
5761 -- function DEFINING_DESIGNATOR is
5762 -- new generic_function_NAME [GENERIC_ACTUAL_PART];
5764 -- N_Package_Instantiation
5765 -- Sloc points to PACKAGE
5766 -- Defining_Unit_Name (Node1)
5768 -- Generic_Associations (List3) (set to No_List if no
5769 -- generic actual part)
5770 -- Parent_Spec (Node4-Sem)
5771 -- Instance_Spec (Node5-Sem)
5772 -- ABE_Is_Certain (Flag18-Sem)
5774 -- N_Procedure_Instantiation
5775 -- Sloc points to PROCEDURE
5776 -- Defining_Unit_Name (Node1)
5778 -- Parent_Spec (Node4-Sem)
5779 -- Generic_Associations (List3) (set to No_List if no
5780 -- generic actual part)
5781 -- Instance_Spec (Node5-Sem)
5782 -- Must_Override (Flag14) set if overriding indicator present
5783 -- Must_Not_Override (Flag15) set if not_overriding indicator present
5784 -- ABE_Is_Certain (Flag18-Sem)
5786 -- N_Function_Instantiation
5787 -- Sloc points to FUNCTION
5788 -- Defining_Unit_Name (Node1)
5790 -- Generic_Associations (List3) (set to No_List if no
5791 -- generic actual part)
5792 -- Parent_Spec (Node4-Sem)
5793 -- Instance_Spec (Node5-Sem)
5794 -- Must_Override (Flag14) set if overriding indicator present
5795 -- Must_Not_Override (Flag15) set if not_overriding indicator present
5796 -- ABE_Is_Certain (Flag18-Sem)
5798 -- Note: overriding indicator is an Ada 2005 feature
5800 -------------------------------
5801 -- 12.3 Generic Actual Part --
5802 -------------------------------
5804 -- GENERIC_ACTUAL_PART ::=
5805 -- (GENERIC_ASSOCIATION {, GENERIC_ASSOCIATION})
5807 -------------------------------
5808 -- 12.3 Generic Association --
5809 -------------------------------
5811 -- GENERIC_ASSOCIATION ::=
5812 -- [generic_formal_parameter_SELECTOR_NAME =>]
5814 -- Note: unlike the procedure call case, a generic association node
5815 -- is generated for every association, even if no formal parameter
5816 -- selector name is present. In this case the parser will leave the
5817 -- Selector_Name field set to Empty, to be filled in later by the
5820 -- In Ada 2005, a formal may be associated with a box, if the
5821 -- association is part of the list of actuals for a formal package.
5822 -- If the association is given by OTHERS => <>, the association is
5823 -- an N_Others_Choice.
5825 -- N_Generic_Association
5826 -- Sloc points to first token of generic association
5827 -- Selector_Name (Node2) (set to Empty if no formal
5828 -- parameter selector name)
5829 -- Explicit_Generic_Actual_Parameter (Node1) (Empty if box present)
5830 -- Box_Present (Flag15) (for formal_package associations with a box)
5832 ---------------------------------------------
5833 -- 12.3 Explicit Generic Actual Parameter --
5834 ---------------------------------------------
5836 -- EXPLICIT_GENERIC_ACTUAL_PARAMETER ::=
5837 -- EXPRESSION | variable_NAME | subprogram_NAME
5838 -- | entry_NAME | SUBTYPE_MARK | package_instance_NAME
5840 -------------------------------------
5841 -- 12.4 Formal Object Declaration --
5842 -------------------------------------
5844 -- FORMAL_OBJECT_DECLARATION ::=
5845 -- DEFINING_IDENTIFIER_LIST :
5846 -- MODE [NULL_EXCLUSION] SUBTYPE_MARK [:= DEFAULT_EXPRESSION];
5847 -- | DEFINING_IDENTIFIER_LIST :
5848 -- MODE ACCESS_DEFINITION [:= DEFAULT_EXPRESSION];
5850 -- Although the syntax allows multiple identifiers in the list, the
5851 -- semantics is as though successive declarations were given with
5852 -- identical type definition and expression components. To simplify
5853 -- semantic processing, the parser represents a multiple declaration
5854 -- case as a sequence of single declarations, using the More_Ids and
5855 -- Prev_Ids flags to preserve the original source form as described
5856 -- in the section on "Handling of Defining Identifier Lists".
5858 -- N_Formal_Object_Declaration
5859 -- Sloc points to first identifier
5860 -- Defining_Identifier (Node1)
5861 -- In_Present (Flag15)
5862 -- Out_Present (Flag17)
5863 -- Null_Exclusion_Present (Flag11) (set to False if not present)
5864 -- Subtype_Mark (Node4) (set to Empty if not present)
5865 -- Access_Definition (Node3) (set to Empty if not present)
5866 -- Default_Expression (Node5) (set to Empty if no default expression)
5867 -- More_Ids (Flag5) (set to False if no more identifiers in list)
5868 -- Prev_Ids (Flag6) (set to False if no previous identifiers in list)
5870 -----------------------------------
5871 -- 12.5 Formal Type Declaration --
5872 -----------------------------------
5874 -- FORMAL_TYPE_DECLARATION ::=
5875 -- type DEFINING_IDENTIFIER [DISCRIMINANT_PART]
5876 -- is FORMAL_TYPE_DEFINITION;
5878 -- N_Formal_Type_Declaration
5879 -- Sloc points to TYPE
5880 -- Defining_Identifier (Node1)
5881 -- Formal_Type_Definition (Node3)
5882 -- Discriminant_Specifications (List4) (set to No_List if no
5883 -- discriminant part)
5884 -- Unknown_Discriminants_Present (Flag13) set if (<>) discriminant
5886 ----------------------------------
5887 -- 12.5 Formal type definition --
5888 ----------------------------------
5890 -- FORMAL_TYPE_DEFINITION ::=
5891 -- FORMAL_PRIVATE_TYPE_DEFINITION
5892 -- | FORMAL_DERIVED_TYPE_DEFINITION
5893 -- | FORMAL_DISCRETE_TYPE_DEFINITION
5894 -- | FORMAL_SIGNED_INTEGER_TYPE_DEFINITION
5895 -- | FORMAL_MODULAR_TYPE_DEFINITION
5896 -- | FORMAL_FLOATING_POINT_DEFINITION
5897 -- | FORMAL_ORDINARY_FIXED_POINT_DEFINITION
5898 -- | FORMAL_DECIMAL_FIXED_POINT_DEFINITION
5899 -- | FORMAL_ARRAY_TYPE_DEFINITION
5900 -- | FORMAL_ACCESS_TYPE_DEFINITION
5901 -- | FORMAL_INTERFACE_TYPE_DEFINITION
5903 ---------------------------------------------
5904 -- 12.5.1 Formal Private Type Definition --
5905 ---------------------------------------------
5907 -- FORMAL_PRIVATE_TYPE_DEFINITION ::=
5908 -- [[abstract] tagged] [limited] private
5910 -- Note: TAGGED is not allowed in Ada 83 mode
5912 -- N_Formal_Private_Type_Definition
5913 -- Sloc points to PRIVATE
5914 -- Abstract_Present (Flag4)
5915 -- Tagged_Present (Flag15)
5916 -- Limited_Present (Flag17)
5918 --------------------------------------------
5919 -- 12.5.1 Formal Derived Type Definition --
5920 --------------------------------------------
5922 -- FORMAL_DERIVED_TYPE_DEFINITION ::=
5923 -- [abstract] [limited | synchronized]
5924 -- new SUBTYPE_MARK [[and INTERFACE_LIST] with private]
5925 -- Note: this construct is not allowed in Ada 83 mode
5927 -- N_Formal_Derived_Type_Definition
5928 -- Sloc points to NEW
5929 -- Subtype_Mark (Node4)
5930 -- Private_Present (Flag15)
5931 -- Abstract_Present (Flag4)
5932 -- Limited_Present (Flag17)
5933 -- Synchronized_Present (Flag7)
5934 -- Interface_List (List2) (set to No_List if none)
5936 ---------------------------------------------
5937 -- 12.5.2 Formal Discrete Type Definition --
5938 ---------------------------------------------
5940 -- FORMAL_DISCRETE_TYPE_DEFINITION ::= (<>)
5942 -- N_Formal_Discrete_Type_Definition
5945 ---------------------------------------------------
5946 -- 12.5.2 Formal Signed Integer Type Definition --
5947 ---------------------------------------------------
5949 -- FORMAL_SIGNED_INTEGER_TYPE_DEFINITION ::= range <>
5951 -- N_Formal_Signed_Integer_Type_Definition
5952 -- Sloc points to RANGE
5954 --------------------------------------------
5955 -- 12.5.2 Formal Modular Type Definition --
5956 --------------------------------------------
5958 -- FORMAL_MODULAR_TYPE_DEFINITION ::= mod <>
5960 -- N_Formal_Modular_Type_Definition
5961 -- Sloc points to MOD
5963 ----------------------------------------------
5964 -- 12.5.2 Formal Floating Point Definition --
5965 ----------------------------------------------
5967 -- FORMAL_FLOATING_POINT_DEFINITION ::= digits <>
5969 -- N_Formal_Floating_Point_Definition
5970 -- Sloc points to DIGITS
5972 ----------------------------------------------------
5973 -- 12.5.2 Formal Ordinary Fixed Point Definition --
5974 ----------------------------------------------------
5976 -- FORMAL_ORDINARY_FIXED_POINT_DEFINITION ::= delta <>
5978 -- N_Formal_Ordinary_Fixed_Point_Definition
5979 -- Sloc points to DELTA
5981 ---------------------------------------------------
5982 -- 12.5.2 Formal Decimal Fixed Point Definition --
5983 ---------------------------------------------------
5985 -- FORMAL_DECIMAL_FIXED_POINT_DEFINITION ::= delta <> digits <>
5987 -- Note: formal decimal fixed point definition not allowed in Ada 83
5989 -- N_Formal_Decimal_Fixed_Point_Definition
5990 -- Sloc points to DELTA
5992 ------------------------------------------
5993 -- 12.5.3 Formal Array Type Definition --
5994 ------------------------------------------
5996 -- FORMAL_ARRAY_TYPE_DEFINITION ::= ARRAY_TYPE_DEFINITION
5998 -------------------------------------------
5999 -- 12.5.4 Formal Access Type Definition --
6000 -------------------------------------------
6002 -- FORMAL_ACCESS_TYPE_DEFINITION ::= ACCESS_TYPE_DEFINITION
6004 ----------------------------------------------
6005 -- 12.5.5 Formal Interface Type Definition --
6006 ----------------------------------------------
6008 -- FORMAL_INTERFACE_TYPE_DEFINITION ::= INTERFACE_TYPE_DEFINITION
6010 -----------------------------------------
6011 -- 12.6 Formal Subprogram Declaration --
6012 -----------------------------------------
6014 -- FORMAL_SUBPROGRAM_DECLARATION ::=
6015 -- FORMAL_CONCRETE_SUBPROGRAM_DECLARATION
6016 -- | FORMAL_ABSTRACT_SUBPROGRAM_DECLARATION
6018 --------------------------------------------------
6019 -- 12.6 Formal Concrete Subprogram Declaration --
6020 --------------------------------------------------
6022 -- FORMAL_CONCRETE_SUBPROGRAM_DECLARATION ::=
6023 -- with SUBPROGRAM_SPECIFICATION [is SUBPROGRAM_DEFAULT];
6025 -- N_Formal_Concrete_Subprogram_Declaration
6026 -- Sloc points to WITH
6027 -- Specification (Node1)
6028 -- Default_Name (Node2) (set to Empty if no subprogram default)
6029 -- Box_Present (Flag15)
6031 -- Note: if no subprogram default is present, then Name is set
6032 -- to Empty, and Box_Present is False.
6034 --------------------------------------------------
6035 -- 12.6 Formal Abstract Subprogram Declaration --
6036 --------------------------------------------------
6038 -- FORMAL_ABSTRACT_SUBPROGRAM_DECLARATION ::=
6039 -- with SUBPROGRAM_SPECIFICATION is abstract [SUBPROGRAM_DEFAULT];
6041 -- N_Formal_Abstract_Subprogram_Declaration
6042 -- Sloc points to WITH
6043 -- Specification (Node1)
6044 -- Default_Name (Node2) (set to Empty if no subprogram default)
6045 -- Box_Present (Flag15)
6047 -- Note: if no subprogram default is present, then Name is set
6048 -- to Empty, and Box_Present is False.
6050 ------------------------------
6051 -- 12.6 Subprogram Default --
6052 ------------------------------
6054 -- SUBPROGRAM_DEFAULT ::= DEFAULT_NAME | <>
6056 -- There is no separate node in the tree for a subprogram default.
6057 -- Instead the parent (N_Formal_Concrete_Subprogram_Declaration
6058 -- or N_Formal_Abstract_Subprogram_Declaration) node contains the
6059 -- default name or box indication, as needed.
6061 ------------------------
6062 -- 12.6 Default Name --
6063 ------------------------
6065 -- DEFAULT_NAME ::= NAME
6067 --------------------------------------
6068 -- 12.7 Formal Package Declaration --
6069 --------------------------------------
6071 -- FORMAL_PACKAGE_DECLARATION ::=
6072 -- with package DEFINING_IDENTIFIER
6073 -- is new generic_package_NAME FORMAL_PACKAGE_ACTUAL_PART;
6075 -- Note: formal package declarations not allowed in Ada 83 mode
6077 -- N_Formal_Package_Declaration
6078 -- Sloc points to WITH
6079 -- Defining_Identifier (Node1)
6081 -- Generic_Associations (List3) (set to No_List if (<>) case or
6082 -- empty generic actual part)
6083 -- Box_Present (Flag15)
6084 -- Instance_Spec (Node5-Sem)
6085 -- ABE_Is_Certain (Flag18-Sem)
6087 --------------------------------------
6088 -- 12.7 Formal Package Actual Part --
6089 --------------------------------------
6091 -- FORMAL_PACKAGE_ACTUAL_PART ::=
6093 -- | [GENERIC_ACTUAL_PART]
6094 -- (FORMAL_PACKAGE_ASSOCIATION {. FORMAL_PACKAGE_ASSOCIATION}
6096 -- FORMAL_PACKAGE_ASSOCIATION ::=
6097 -- GENERIC_ASSOCIATION
6098 -- | GENERIC_FORMAL_PARAMETER_SELECTOR_NAME => <>
6100 -- There is no explicit node in the tree for a formal package actual
6101 -- part. Instead the information appears in the parent node (i.e. the
6102 -- formal package declaration node itself).
6104 -- There is no explicit node for a formal package association. All of
6105 -- them are represented either by a generic association, possibly with
6106 -- Box_Present, or by an N_Others_Choice.
6108 ---------------------------------
6109 -- 13.1 Representation clause --
6110 ---------------------------------
6112 -- REPRESENTATION_CLAUSE ::=
6113 -- ATTRIBUTE_DEFINITION_CLAUSE
6114 -- | ENUMERATION_REPRESENTATION_CLAUSE
6115 -- | RECORD_REPRESENTATION_CLAUSE
6118 ----------------------
6119 -- 13.1 Local Name --
6120 ----------------------
6124 -- | DIRECT_NAME'ATTRIBUTE_DESIGNATOR
6125 -- | library_unit_NAME
6127 -- The construct DIRECT_NAME'ATTRIBUTE_DESIGNATOR appears in the tree
6128 -- as an attribute reference, which has essentially the same form.
6130 ---------------------------------------
6131 -- 13.3 Attribute definition clause --
6132 ---------------------------------------
6134 -- ATTRIBUTE_DEFINITION_CLAUSE ::=
6135 -- for LOCAL_NAME'ATTRIBUTE_DESIGNATOR use EXPRESSION;
6136 -- | for LOCAL_NAME'ATTRIBUTE_DESIGNATOR use NAME;
6138 -- In Ada 83, the expression must be a simple expression and the
6139 -- local name must be a direct name.
6141 -- Note: the only attribute definition clause that is processed by
6142 -- gigi is an address clause. For all other cases, the information
6143 -- is extracted by the front end and either results in setting entity
6144 -- information, e.g. Esize for the Size clause, or in appropriate
6145 -- expansion actions (e.g. in the case of Storage_Size).
6147 -- For an address clause, Gigi constructs the appropriate addressing
6148 -- code. It also ensures that no aliasing optimizations are made
6149 -- for the object for which the address clause appears.
6151 -- Note: for an address clause used to achieve an overlay:
6155 -- for B'Address use A'Address;
6157 -- the above rule means that Gigi will ensure that no optimizations
6158 -- will be made for B that would violate the implementation advice
6159 -- of RM 13.3(19). However, this advice applies only to B and not
6160 -- to A, which seems unfortunate. The GNAT front end will mark the
6161 -- object A as volatile to also prevent unwanted optimization
6162 -- assumptions based on no aliasing being made for B.
6164 -- N_Attribute_Definition_Clause
6165 -- Sloc points to FOR
6166 -- Name (Node2) the local name
6167 -- Chars (Name1) the identifier name from the attribute designator
6168 -- Expression (Node3) the expression or name
6169 -- Entity (Node4-Sem)
6170 -- Next_Rep_Item (Node5-Sem)
6171 -- From_At_Mod (Flag4-Sem)
6172 -- Check_Address_Alignment (Flag11-Sem)
6173 -- Address_Warning_Posted (Flag18-Sem)
6175 ---------------------------------------------
6176 -- 13.4 Enumeration representation clause --
6177 ---------------------------------------------
6179 -- ENUMERATION_REPRESENTATION_CLAUSE ::=
6180 -- for first_subtype_LOCAL_NAME use ENUMERATION_AGGREGATE;
6182 -- In Ada 83, the name must be a direct name
6184 -- N_Enumeration_Representation_Clause
6185 -- Sloc points to FOR
6186 -- Identifier (Node1) direct name
6187 -- Array_Aggregate (Node3)
6188 -- Next_Rep_Item (Node5-Sem)
6190 ---------------------------------
6191 -- 13.4 Enumeration aggregate --
6192 ---------------------------------
6194 -- ENUMERATION_AGGREGATE ::= ARRAY_AGGREGATE
6196 ------------------------------------------
6197 -- 13.5.1 Record representation clause --
6198 ------------------------------------------
6200 -- RECORD_REPRESENTATION_CLAUSE ::=
6201 -- for first_subtype_LOCAL_NAME use
6202 -- record [MOD_CLAUSE]
6203 -- {COMPONENT_CLAUSE}
6206 -- Gigi restriction: Mod_Clause is always Empty (if present it is
6207 -- replaced by a corresponding Alignment attribute definition clause).
6209 -- Note: Component_Clauses can include pragmas
6211 -- N_Record_Representation_Clause
6212 -- Sloc points to FOR
6213 -- Identifier (Node1) direct name
6214 -- Mod_Clause (Node2) (set to Empty if no mod clause present)
6215 -- Component_Clauses (List3)
6216 -- Next_Rep_Item (Node5-Sem)
6218 ------------------------------
6219 -- 13.5.1 Component clause --
6220 ------------------------------
6222 -- COMPONENT_CLAUSE ::=
6223 -- component_LOCAL_NAME at POSITION
6224 -- range FIRST_BIT .. LAST_BIT;
6226 -- N_Component_Clause
6227 -- Sloc points to AT
6228 -- Component_Name (Node1) points to Name or Attribute_Reference
6230 -- First_Bit (Node3)
6233 ----------------------
6234 -- 13.5.1 Position --
6235 ----------------------
6237 -- POSITION ::= static_EXPRESSION
6239 -----------------------
6240 -- 13.5.1 First_Bit --
6241 -----------------------
6243 -- FIRST_BIT ::= static_SIMPLE_EXPRESSION
6245 ----------------------
6246 -- 13.5.1 Last_Bit --
6247 ----------------------
6249 -- LAST_BIT ::= static_SIMPLE_EXPRESSION
6251 --------------------------
6252 -- 13.8 Code statement --
6253 --------------------------
6255 -- CODE_STATEMENT ::= QUALIFIED_EXPRESSION;
6257 -- Note: in GNAT, the qualified expression has the form
6259 -- Asm_Insn'(Asm (...));
6261 -- See package System.Machine_Code in file s-maccod.ads for details on
6262 -- the allowed parameters to Asm. There are two ways this node can
6263 -- arise, as a code statement, in which case the expression is the
6264 -- qualified expression, or as a result of the expansion of an intrinsic
6265 -- call to the Asm or Asm_Input procedure.
6268 -- Sloc points to first token of the expression
6269 -- Expression (Node3)
6271 -- Note: package Exp_Code contains an abstract functional interface
6272 -- for use by Gigi in accessing the data from N_Code_Statement nodes.
6274 ------------------------
6275 -- 13.12 Restriction --
6276 ------------------------
6279 -- restriction_IDENTIFIER
6280 -- | restriction_parameter_IDENTIFIER => EXPRESSION
6282 -- There is no explicit node for restrictions. Instead the restriction
6283 -- appears in normal pragma syntax as a pragma argument association,
6284 -- which has the same syntactic form.
6286 --------------------------
6287 -- B.2 Shift Operators --
6288 --------------------------
6290 -- Calls to the intrinsic shift functions are converted to one of
6291 -- the following shift nodes, which have the form of normal binary
6292 -- operator names. Note that for a given shift operation, one node
6293 -- covers all possible types, as for normal operators.
6295 -- Note: it is perfectly permissible for the expander to generate
6296 -- shift operation nodes directly, in which case they will be analyzed
6297 -- and parsed in the usual manner.
6299 -- Sprint syntax: shift-function-name!(expr, count)
6301 -- Note: the Left_Opnd field holds the first argument (the value to
6302 -- be shifted). The Right_Opnd field holds the second argument (the
6303 -- shift count). The Chars field is the name of the intrinsic function.
6306 -- Sloc points to the function name
6307 -- plus fields for binary operator
6308 -- plus fields for expression
6309 -- Shift_Count_OK (Flag4-Sem)
6311 -- N_Op_Rotate_Right
6312 -- Sloc points to the function name
6313 -- plus fields for binary operator
6314 -- plus fields for expression
6315 -- Shift_Count_OK (Flag4-Sem)
6318 -- Sloc points to the function name
6319 -- plus fields for binary operator
6320 -- plus fields for expression
6321 -- Shift_Count_OK (Flag4-Sem)
6323 -- N_Op_Shift_Right_Arithmetic
6324 -- Sloc points to the function name
6325 -- plus fields for binary operator
6326 -- plus fields for expression
6327 -- Shift_Count_OK (Flag4-Sem)
6330 -- Sloc points to the function name
6331 -- plus fields for binary operator
6332 -- plus fields for expression
6333 -- Shift_Count_OK (Flag4-Sem)
6335 --------------------------
6336 -- Obsolescent Features --
6337 --------------------------
6339 -- The syntax descriptions and tree nodes for obsolescent features are
6340 -- grouped together, corresponding to their location in appendix I in
6341 -- the RM. However, parsing and semantic analysis for these constructs
6342 -- is located in an appropriate chapter (see individual notes).
6344 ---------------------------
6345 -- J.3 Delta Constraint --
6346 ---------------------------
6348 -- Note: the parse routine for this construct is located in section
6349 -- 3.5.9 of Par-Ch3, and semantic analysis is in Sem_Ch3, which is
6350 -- where delta constraint logically belongs.
6352 -- DELTA_CONSTRAINT ::= DELTA static_EXPRESSION [RANGE_CONSTRAINT]
6354 -- N_Delta_Constraint
6355 -- Sloc points to DELTA
6356 -- Delta_Expression (Node3)
6357 -- Range_Constraint (Node4) (set to Empty if not present)
6359 --------------------
6361 --------------------
6363 -- AT_CLAUSE ::= for DIRECT_NAME use at EXPRESSION;
6365 -- Note: the parse routine for this construct is located in Par-Ch13,
6366 -- and the semantic analysis is in Sem_Ch13, where at clause logically
6367 -- belongs if it were not obsolescent.
6369 -- Note: in Ada 83 the expression must be a simple expression
6371 -- Gigi restriction: This node never appears, it is rewritten as an
6372 -- address attribute definition clause.
6375 -- Sloc points to FOR
6376 -- Identifier (Node1)
6377 -- Expression (Node3)
6379 ---------------------
6380 -- J.8 Mod clause --
6381 ---------------------
6383 -- MOD_CLAUSE ::= at mod static_EXPRESSION;
6385 -- Note: the parse routine for this construct is located in Par-Ch13,
6386 -- and the semantic analysis is in Sem_Ch13, where mod clause logically
6387 -- belongs if it were not obsolescent.
6389 -- Note: in Ada 83, the expression must be a simple expression
6391 -- Gigi restriction: this node never appears. It is replaced
6392 -- by a corresponding Alignment attribute definition clause.
6394 -- Note: pragmas can appear before and after the MOD_CLAUSE since
6395 -- its name has "clause" in it. This is rather strange, but is quite
6396 -- definitely specified. The pragmas before are collected in the
6397 -- Pragmas_Before field of the mod clause node itself, and pragmas
6398 -- after are simply swallowed up in the list of component clauses.
6401 -- Sloc points to AT
6402 -- Expression (Node3)
6403 -- Pragmas_Before (List4) Pragmas before mod clause (No_List if none)
6405 --------------------
6406 -- Semantic Nodes --
6407 --------------------
6409 -- These semantic nodes are used to hold additional semantic information.
6410 -- They are inserted into the tree as a result of semantic processing.
6411 -- Although there are no legitimate source syntax constructions that
6412 -- correspond directly to these nodes, we need a source syntax for the
6413 -- reconstructed tree printed by Sprint, and the node descriptions here
6414 -- show this syntax.
6416 ----------------------------
6417 -- Conditional Expression --
6418 ----------------------------
6420 -- This node is used to represent an expression corresponding to the
6421 -- C construct (condition ? then-expression : else_expression), where
6422 -- Expressions is a three element list, whose first expression is the
6423 -- condition, and whose second and third expressions are the then and
6424 -- else expressions respectively.
6426 -- Note: the Then_Actions and Else_Actions fields are always set to
6427 -- No_List in the tree passed to Gigi. These fields are used only
6428 -- for temporary processing purposes in the expander.
6430 -- Sprint syntax: (if expr then expr else expr)
6432 -- N_Conditional_Expression
6433 -- Sloc points to related node
6434 -- Expressions (List1)
6435 -- Then_Actions (List2-Sem)
6436 -- Else_Actions (List3-Sem)
6437 -- plus fields for expression
6439 -- Note: in the case where a debug source file is generated, the Sloc
6440 -- for this node points to the IF keyword in the Sprint file output.
6446 -- The N_Expanded_Name node is used to represent a selected component
6447 -- name that has been resolved to an expanded name. The semantic phase
6448 -- replaces N_Selected_Component nodes that represent names by the use
6449 -- of this node, leaving the N_Selected_Component node used only when
6450 -- the prefix is a record or protected type.
6452 -- The fields of the N_Expanded_Name node are layed out identically
6453 -- to those of the N_Selected_Component node, allowing conversion of
6454 -- an expanded name node to a selected component node to be done
6455 -- easily, see Sinfo.CN.Change_Selected_Component_To_Expanded_Name.
6457 -- There is no special sprint syntax for an expanded name
6460 -- Sloc points to the period
6461 -- Chars (Name1) copy of Chars field of selector name
6463 -- Selector_Name (Node2)
6464 -- Entity (Node4-Sem)
6465 -- Associated_Node (Node4-Sem)
6466 -- Redundant_Use (Flag13-Sem)
6467 -- Has_Private_View (Flag11-Sem) set in generic units.
6468 -- plus fields for expression
6470 --------------------
6471 -- Free Statement --
6472 --------------------
6474 -- The N_Free_Statement node is generated as a result of a call to an
6475 -- instantiation of Unchecked_Deallocation. The instantiation of this
6476 -- generic is handled specially and generates this node directly.
6478 -- Sprint syntax: free expression
6481 -- Sloc is copied from the unchecked deallocation call
6482 -- Expression (Node3) argument to unchecked deallocation call
6483 -- Storage_Pool (Node1-Sem)
6484 -- Procedure_To_Call (Node2-Sem)
6485 -- Actual_Designated_Subtype (Node4-Sem)
6487 -- Note: in the case where a debug source file is generated, the Sloc
6488 -- for this node points to the FREE keyword in the Sprint file output.
6494 -- This node marks the point in a declarative part at which an entity
6495 -- declared therein becomes frozen. The expander places initialization
6496 -- procedures for types at those points. Gigi uses the freezing point
6497 -- to elaborate entities that may depend on previous private types.
6499 -- See the section in Einfo "Delayed Freezing and Elaboration" for
6500 -- a full description of the use of this node.
6502 -- The Entity field points back to the entity for the type (whose
6503 -- Freeze_Node field points back to this freeze node).
6505 -- The Actions field contains a list of declarations and statements
6506 -- generated by the expander which are associated with the freeze
6507 -- node, and are elaborated as though the freeze node were replaced
6508 -- by this sequence of actions.
6510 -- Note: the Sloc field in the freeze node references a construct
6511 -- associated with the freezing point. This is used for posting
6512 -- messages in some error/warning situations, e.g. the case where
6513 -- a primitive operation of a tagged type is declared too late.
6515 -- Sprint syntax: freeze entity-name [
6520 -- Sloc points near freeze point (see above special note)
6521 -- Entity (Node4-Sem)
6522 -- Access_Types_To_Process (Elist2-Sem) (set to No_Elist if none)
6523 -- TSS_Elist (Elist3-Sem) (set to No_Elist if no associated TSS's)
6524 -- Actions (List1) (set to No_List if no freeze actions)
6525 -- First_Subtype_Link (Node5-Sem) (set to Empty if no link)
6527 -- The Actions field holds actions associated with the freeze. These
6528 -- actions are elaborated at the point where the type is frozen.
6530 -- Note: in the case where a debug source file is generated, the Sloc
6531 -- for this node points to the FREEZE keyword in the Sprint file output.
6533 --------------------------------
6534 -- Implicit Label Declaration --
6535 --------------------------------
6537 -- An implicit label declaration is created for every occurrence of a
6538 -- label on a statement or a label on a block or loop. It is chained
6539 -- in the declarations of the innermost enclosing block as specified
6540 -- in RM section 5.1 (3).
6542 -- The Defining_Identifier is the actual identifier for the
6543 -- statement identifier. Note that the occurrence of the label
6544 -- is a reference, NOT the defining occurrence. The defining
6545 -- occurrence occurs at the head of the innermost enclosing
6546 -- block, and is represented by this node.
6548 -- Note: from the grammar, this might better be called an implicit
6549 -- statement identifier declaration, but the term we choose seems
6550 -- friendlier, since at least informally statement identifiers are
6551 -- called labels in both cases (i.e. when used in labels, and when
6552 -- used as the identifiers of blocks and loops).
6554 -- Note: although this is logically a semantic node, since it does
6555 -- not correspond directly to a source syntax construction, these
6556 -- nodes are actually created by the parser in a post pass done just
6557 -- after parsing is complete, before semantic analysis is started (see
6558 -- the Par.Labl subunit in file par-labl.adb).
6560 -- Sprint syntax: labelname : label;
6562 -- N_Implicit_Label_Declaration
6563 -- Sloc points to the << of the label
6564 -- Defining_Identifier (Node1)
6565 -- Label_Construct (Node2-Sem)
6567 -- Note: in the case where a debug source file is generated, the Sloc
6568 -- for this node points to the label name in the generated declaration.
6570 ---------------------
6571 -- Itype_Reference --
6572 ---------------------
6574 -- This node is used to create a reference to an Itype. The only
6575 -- purpose is to make sure that the Itype is defined if this is the
6578 -- A typical use of this node is when an Itype is to be referenced in
6579 -- two branches of an if statement. In this case it is important that
6580 -- the first use of the Itype not be inside the conditional, since
6581 -- then it might not be defined if the wrong branch of the if is
6582 -- taken in the case where the definition generates elaboration code.
6584 -- The Itype field points to the referenced Itype
6586 -- sprint syntax: reference itype-name
6588 -- N_Itype_Reference
6589 -- Sloc points to the node generating the reference
6590 -- Itype (Node1-Sem)
6592 -- Note: in the case where a debug source file is generated, the Sloc
6593 -- for this node points to the REFERENCE keyword in the file output.
6595 ---------------------
6596 -- Raise_xxx_Error --
6597 ---------------------
6599 -- One of these nodes is created during semantic analysis to replace
6600 -- a node for an expression that is determined to definitely raise
6601 -- the corresponding exception.
6603 -- The N_Raise_xxx_Error node may also stand alone in place
6604 -- of a declaration or statement, in which case it simply causes
6605 -- the exception to be raised (i.e. it is equivalent to a raise
6606 -- statement that raises the corresponding exception). This use
6607 -- is distinguished by the fact that the Etype in this case is
6608 -- Standard_Void_Type, In the subexpression case, the Etype is the
6609 -- same as the type of the subexpression which it replaces.
6611 -- If Condition is empty, then the raise is unconditional. If the
6612 -- Condition field is non-empty, it is a boolean expression which
6613 -- is first evaluated, and the exception is raised only if the
6614 -- value of the expression is True. In the unconditional case, the
6615 -- creation of this node is usually accompanied by a warning message
6616 -- error. The creation of this node will usually be accompanied by a
6617 -- message (unless it appears within the right operand of a short
6618 -- circuit form whose left argument is static and decisively
6619 -- eliminates elaboration of the raise operation. The condition field
6620 -- can ONLY be present when the node is used as a statement form, it
6621 -- may NOT be present in the case where the node appears within an
6624 -- The exception is generated with a message that contains the
6625 -- file name and line number, and then appended text. The Reason
6626 -- code shows the text to be added. The Reason code is an element
6627 -- of the type Types.RT_Exception_Code, and indicates both the
6628 -- message to be added, and the exception to be raised (which must
6629 -- match the node type). The value is stored by storing a Uint which
6630 -- is the Pos value of the enumeration element in this type.
6632 -- Gigi restriction: This expander ensures that the type of the
6633 -- Condition field is always Standard.Boolean, even if the type
6634 -- in the source is some non-standard boolean type.
6636 -- Sprint syntax: [xxx_error "msg"]
6637 -- or: [xxx_error when condition "msg"]
6639 -- N_Raise_Constraint_Error
6640 -- Sloc references related construct
6641 -- Condition (Node1) (set to Empty if no condition)
6643 -- plus fields for expression
6645 -- N_Raise_Program_Error
6646 -- Sloc references related construct
6647 -- Condition (Node1) (set to Empty if no condition)
6649 -- plus fields for expression
6651 -- N_Raise_Storage_Error
6652 -- Sloc references related construct
6653 -- Condition (Node1) (set to Empty if no condition)
6655 -- plus fields for expression
6657 -- Note: Sloc is copied from the expression generating the exception.
6658 -- In the case where a debug source file is generated, the Sloc for
6659 -- this node points to the left bracket in the Sprint file output.
6661 -- Note: the back end may be required to translate these nodes into
6662 -- appropriate goto statements. See description of N_Push/Pop_xxx_Label.
6664 ---------------------------------------------
6665 -- Optimization of Exception Raise to Goto --
6666 ---------------------------------------------
6668 -- In some cases, the front end will determine that any exception raised
6669 -- by the back end for a certain exception should be transformed into a
6672 -- There are three kinds of exceptions raised by the back end (note that
6673 -- for this purpose we consider gigi to be part of the back end in the
6676 -- 1. Exceptions resulting from N_Raise_xxx_Error nodes
6677 -- 2. Exceptions from checks triggered by Do_xxx_Check flags
6678 -- 3. Other cases not specifically marked by the front end
6680 -- Normally all such exceptions are translated into calls to the proper
6681 -- Rcheck_xx procedure, where xx encodes both the exception to be raised
6682 -- and the exception message.
6684 -- The front end may determine that for a particular sequence of code,
6685 -- exceptions in any of these three categories for a particular builtin
6686 -- exception should result in a goto, rather than a call to Rcheck_xx.
6687 -- The exact sequence to be generated is:
6689 -- Local_Raise (exception'Identity);
6692 -- The front end marks such a sequence of code by bracketing it with
6693 -- push and pop nodes:
6695 -- N_Push_xxx_Label (referencing the label)
6697 -- (code where transformation is expected for exception xxx)
6701 -- The use of push/pop reflects the fact that such regions can properly
6702 -- nest, and one special case is a subregion in which no transformation
6703 -- is allowed. Such a region is marked by a N_Push_xxx_Label node whose
6704 -- Exception_Label field is Empty.
6706 -- N_Push_Constraint_Error_Label
6707 -- Sloc references first statement in region covered
6708 -- Exception_Label (Node5-Sem)
6710 -- N_Push_Program_Error_Label
6711 -- Sloc references first statement in region covered
6712 -- Exception_Label (Node5-Sem)
6714 -- N_Push_Storage_Error_Label
6715 -- Sloc references first statement in region covered
6716 -- Exception_Label (Node5-Sem)
6718 -- N_Pop_Constraint_Error_Label
6719 -- Sloc references last statement in region covered
6721 -- N_Pop_Program_Error_Label
6722 -- Sloc references last statement in region covered
6724 -- N_Pop_Storage_Error_Label
6725 -- Sloc references last statement in region covered
6731 -- For a number of purposes, we need to construct references to objects.
6732 -- These references are subsequently treated as normal access values.
6733 -- An example is the construction of the parameter block passed to a
6734 -- task entry. The N_Reference node is provided for this purpose. It is
6735 -- similar in effect to the use of the Unrestricted_Access attribute,
6736 -- and like Unrestricted_Access can be applied to objects which would
6737 -- not be valid prefixes for the Unchecked_Access attribute (e.g.
6738 -- objects which are not aliased, and slices). In addition it can be
6739 -- applied to composite type values as well as objects, including string
6740 -- values and aggregates.
6742 -- Note: we use the Prefix field for this expression so that the
6743 -- resulting node can be treated using common code with the attribute
6744 -- nodes for the 'Access and related attributes. Logically it would make
6745 -- more sense to call it an Expression field, but then we would have to
6746 -- special case the treatment of the N_Reference node.
6748 -- Sprint syntax: prefix'reference
6751 -- Sloc is copied from the expression
6753 -- plus fields for expression
6755 -- Note: in the case where a debug source file is generated, the Sloc
6756 -- for this node points to the quote in the Sprint file output.
6758 ---------------------
6759 -- Subprogram_Info --
6760 ---------------------
6762 -- This node generates the appropriate Subprogram_Info value for a
6763 -- given procedure. See Ada.Exceptions for further details
6765 -- Sprint syntax: subprog'subprogram_info
6767 -- N_Subprogram_Info
6768 -- Sloc points to the entity for the procedure
6769 -- Identifier (Node1) identifier referencing the procedure
6770 -- Etype (Node5-Sem) type (always set to Ada.Exceptions.Code_Loc
6772 -- Note: in the case where a debug source file is generated, the Sloc
6773 -- for this node points to the quote in the Sprint file output.
6775 --------------------------
6776 -- Unchecked Expression --
6777 --------------------------
6779 -- An unchecked expression is one that must be analyzed and resolved
6780 -- with all checks off, regardless of the current setting of scope
6783 -- Sprint syntax: `(expression)
6785 -- Note: this node is always removed from the tree (and replaced by
6786 -- its constituent expression) on completion of analysis, so it only
6787 -- appears in intermediate trees, and will never be seen by Gigi.
6789 -- N_Unchecked_Expression
6790 -- Sloc is a copy of the Sloc of the expression
6791 -- Expression (Node3)
6792 -- plus fields for expression
6794 -- Note: in the case where a debug source file is generated, the Sloc
6795 -- for this node points to the back quote in the Sprint file output.
6797 -------------------------------
6798 -- Unchecked Type Conversion --
6799 -------------------------------
6801 -- An unchecked type conversion node represents the semantic action
6802 -- corresponding to a call to an instantiation of Unchecked_Conversion.
6803 -- It is generated as a result of actual use of Unchecked_Conversion
6804 -- and also the expander generates unchecked type conversion nodes
6805 -- directly for expansion of complex semantic actions.
6807 -- Note: an unchecked type conversion is a variable as far as the
6808 -- semantics are concerned, which is convenient for the expander.
6809 -- This does not change what Ada source programs are legal, since
6810 -- clearly a function call to an instantiation of Unchecked_Conversion
6811 -- is not a variable in any case.
6813 -- Sprint syntax: subtype-mark!(expression)
6815 -- N_Unchecked_Type_Conversion
6816 -- Sloc points to related node in source
6817 -- Subtype_Mark (Node4)
6818 -- Expression (Node3)
6819 -- Kill_Range_Check (Flag11-Sem)
6820 -- No_Truncation (Flag17-Sem)
6821 -- plus fields for expression
6823 -- Note: in the case where a debug source file is generated, the Sloc
6824 -- for this node points to the exclamation in the Sprint file output.
6826 -----------------------------------
6827 -- Validate_Unchecked_Conversion --
6828 -----------------------------------
6830 -- The front end does most of the validation of unchecked conversion,
6831 -- including checking sizes (this is done after the back end is called
6832 -- to take advantage of back-annotation of calculated sizes).
6834 -- The front end also deals with specific cases that are not allowed
6835 -- e.g. involving unconstrained array types.
6837 -- For the case of the standard gigi backend, this means that all
6838 -- checks are done in the front-end.
6840 -- However, in the case of specialized back-ends, notably the JVM
6841 -- backend for JGNAT, additional requirements and restrictions apply
6842 -- to unchecked conversion, and these are most conveniently performed
6843 -- in the specialized back-end.
6845 -- To accommodate this requirement, for such back ends, the following
6846 -- special node is generated recording an unchecked conversion that
6847 -- needs to be validated. The back end should post an appropriate
6848 -- error message if the unchecked conversion is invalid or warrants
6849 -- a special warning message.
6851 -- Source_Type and Target_Type point to the entities for the two
6852 -- types involved in the unchecked conversion instantiation that
6853 -- is to be validated.
6855 -- Sprint syntax: validate Unchecked_Conversion (source, target);
6857 -- N_Validate_Unchecked_Conversion
6858 -- Sloc points to instantiation (location for warning message)
6859 -- Source_Type (Node1-Sem)
6860 -- Target_Type (Node2-Sem)
6862 -- Note: in the case where a debug source file is generated, the Sloc
6863 -- for this node points to the VALIDATE keyword in the file output.
6869 -- Used as the contents of the Nkind field of the dummy Empty node
6870 -- and in some other situations to indicate an uninitialized value.
6873 -- Chars (Name1) is set to No_Name
6879 -- Used as the contents of the Nkind field of the dummy Error node.
6880 -- Has an Etype field, which gets set to Any_Type later on, to help
6881 -- error recovery (Error_Posted is also set in the Error node).
6884 -- Chars (Name1) is set to Error_Name
6885 -- Etype (Node5-Sem)
6887 --------------------------
6888 -- Node Type Definition --
6889 --------------------------
6891 -- The following is the definition of the Node_Kind type. As previously
6892 -- discussed, this is separated off to allow rearrangement of the order
6893 -- to facilitate definition of subtype ranges. The comments show the
6894 -- subtype classes which apply to each set of node kinds. The first
6895 -- entry in the comment characterizes the following list of nodes.
6900 -- N_Representation_Clause
6904 N_Enumeration_Representation_Clause,
6906 N_Record_Representation_Clause,
6908 -- N_Representation_Clause, N_Has_Chars
6910 N_Attribute_Definition_Clause,
6915 N_Pragma_Argument_Association,
6921 -- N_Entity, N_Has_Etype, N_Has_Chars
6923 N_Defining_Character_Literal,
6924 N_Defining_Identifier,
6925 N_Defining_Operator_Symbol,
6927 -- N_Subexpr, N_Has_Etype, N_Has_Chars, N_Has_Entity
6931 -- N_Direct_Name, N_Subexpr, N_Has_Etype,
6932 -- N_Has_Chars, N_Has_Entity
6937 -- N_Direct_Name, N_Subexpr, N_Has_Etype,
6938 -- N_Has_Chars, N_Has_Entity
6940 N_Character_Literal,
6942 -- N_Binary_Op, N_Op, N_Subexpr,
6943 -- N_Has_Etype, N_Has_Chars, N_Has_Entity
6950 -- N_Binary_Op, N_Op, N_Subexpr, N_Has_Treat_Fixed_As_Integer
6951 -- N_Has_Etype, N_Has_Chars, N_Has_Entity, N_Multiplying_Operator
6958 -- N_Binary_Op, N_Op, N_Subexpr, N_Has_Etype
6959 -- N_Has_Entity, N_Has_Chars, N_Op_Boolean
6963 -- N_Binary_Op, N_Op, N_Subexpr, N_Has_Etype
6964 -- N_Has_Entity, N_Has_Chars, N_Op_Boolean, N_Op_Compare
6973 -- N_Binary_Op, N_Op, N_Subexpr, N_Has_Etype
6974 -- N_Has_Entity, N_Has_Chars, N_Op_Boolean
6979 -- N_Binary_Op, N_Op, N_Subexpr, N_Has_Etype,
6980 -- N_Op_Shift, N_Has_Chars, N_Has_Entity
6986 N_Op_Shift_Right_Arithmetic,
6988 -- N_Unary_Op, N_Op, N_Subexpr, N_Has_Etype,
6989 -- N_Has_Chars, N_Has_Entity
6996 -- N_Subexpr, N_Has_Etype, N_Has_Entity
6998 N_Attribute_Reference,
7000 -- N_Subexpr, N_Has_Etype, N_Membership_Test
7005 -- N_Subexpr, N_Has_Etype
7008 N_Conditional_Expression,
7009 N_Explicit_Dereference,
7011 N_Indexed_Component,
7015 N_Procedure_Call_Statement,
7016 N_Qualified_Expression,
7018 -- N_Raise_xxx_Error, N_Subexpr, N_Has_Etype
7020 N_Raise_Constraint_Error,
7021 N_Raise_Program_Error,
7022 N_Raise_Storage_Error,
7024 -- N_Subexpr, N_Has_Etype
7028 N_Extension_Aggregate,
7032 N_Selected_Component,
7037 N_Unchecked_Expression,
7038 N_Unchecked_Type_Conversion,
7042 N_Subtype_Indication,
7046 N_Component_Declaration,
7047 N_Entry_Declaration,
7048 N_Formal_Object_Declaration,
7049 N_Formal_Type_Declaration,
7050 N_Full_Type_Declaration,
7051 N_Incomplete_Type_Declaration,
7052 N_Loop_Parameter_Specification,
7053 N_Object_Declaration,
7054 N_Protected_Type_Declaration,
7055 N_Private_Extension_Declaration,
7056 N_Private_Type_Declaration,
7057 N_Subtype_Declaration,
7059 -- N_Subprogram_Specification, N_Declaration
7061 N_Function_Specification,
7062 N_Procedure_Specification,
7064 -- N_Access_To_Subprogram_Definition
7066 N_Access_Function_Definition,
7067 N_Access_Procedure_Definition,
7069 -- N_Later_Decl_Item
7071 N_Task_Type_Declaration,
7073 -- N_Body_Stub, N_Later_Decl_Item
7075 N_Package_Body_Stub,
7076 N_Protected_Body_Stub,
7077 N_Subprogram_Body_Stub,
7080 -- N_Generic_Instantiation, N_Later_Decl_Item
7081 -- N_Subprogram_Instantiation
7083 N_Function_Instantiation,
7084 N_Procedure_Instantiation,
7086 -- N_Generic_Instantiation, N_Later_Decl_Item
7088 N_Package_Instantiation,
7090 -- N_Unit_Body, N_Later_Decl_Item, N_Proper_Body
7095 -- N_Later_Decl_Item, N_Proper_Body
7100 -- N_Later_Decl_Item
7102 N_Implicit_Label_Declaration,
7103 N_Package_Declaration,
7104 N_Single_Task_Declaration,
7105 N_Subprogram_Declaration,
7106 N_Use_Package_Clause,
7108 -- N_Generic_Declaration, N_Later_Decl_Item
7110 N_Generic_Package_Declaration,
7111 N_Generic_Subprogram_Declaration,
7113 -- N_Array_Type_Definition
7115 N_Constrained_Array_Definition,
7116 N_Unconstrained_Array_Definition,
7118 -- N_Renaming_Declaration
7120 N_Exception_Renaming_Declaration,
7121 N_Object_Renaming_Declaration,
7122 N_Package_Renaming_Declaration,
7123 N_Subprogram_Renaming_Declaration,
7125 -- N_Generic_Renaming_Declaration, N_Renaming_Declaration
7127 N_Generic_Function_Renaming_Declaration,
7128 N_Generic_Package_Renaming_Declaration,
7129 N_Generic_Procedure_Renaming_Declaration,
7131 -- N_Statement_Other_Than_Procedure_Call
7135 N_Assignment_Statement,
7136 N_Asynchronous_Select,
7140 N_Conditional_Entry_Call,
7142 -- N_Statement_Other_Than_Procedure_Call. N_Delay_Statement
7144 N_Delay_Relative_Statement,
7145 N_Delay_Until_Statement,
7147 -- N_Statement_Other_Than_Procedure_Call
7149 N_Entry_Call_Statement,
7155 N_Requeue_Statement,
7156 N_Return_Statement, -- renamed as N_Simple_Return_Statement below
7157 N_Extended_Return_Statement,
7161 -- N_Statement_Other_Than_Procedure_Call, N_Has_Condition
7168 N_Accept_Alternative,
7169 N_Delay_Alternative,
7171 N_Entry_Body_Formal_Part,
7173 N_Terminate_Alternative,
7175 -- N_Formal_Subprogram_Declaration
7177 N_Formal_Abstract_Subprogram_Declaration,
7178 N_Formal_Concrete_Subprogram_Declaration,
7180 -- N_Push_xxx_Label, N_Push_Pop_xxx_Label
7182 N_Push_Constraint_Error_Label,
7183 N_Push_Program_Error_Label,
7184 N_Push_Storage_Error_Label,
7186 -- N_Pop_xxx_Label, N_Push_Pop_xxx_Label
7188 N_Pop_Constraint_Error_Label,
7189 N_Pop_Program_Error_Label,
7190 N_Pop_Storage_Error_Label,
7192 -- Other nodes (not part of any subtype class)
7195 N_Abstract_Subprogram_Declaration,
7196 N_Access_Definition,
7197 N_Access_To_Object_Definition,
7198 N_Case_Statement_Alternative,
7200 N_Compilation_Unit_Aux,
7201 N_Component_Association,
7202 N_Component_Definition,
7204 N_Derived_Type_Definition,
7205 N_Decimal_Fixed_Point_Definition,
7206 N_Defining_Program_Unit_Name,
7209 N_Digits_Constraint,
7210 N_Discriminant_Association,
7211 N_Discriminant_Specification,
7212 N_Enumeration_Type_Definition,
7214 N_Entry_Call_Alternative,
7215 N_Entry_Index_Specification,
7216 N_Exception_Declaration,
7217 N_Exception_Handler,
7218 N_Floating_Point_Definition,
7219 N_Formal_Decimal_Fixed_Point_Definition,
7220 N_Formal_Derived_Type_Definition,
7221 N_Formal_Discrete_Type_Definition,
7222 N_Formal_Floating_Point_Definition,
7223 N_Formal_Modular_Type_Definition,
7224 N_Formal_Ordinary_Fixed_Point_Definition,
7225 N_Formal_Package_Declaration,
7226 N_Formal_Private_Type_Definition,
7227 N_Formal_Signed_Integer_Type_Definition,
7229 N_Generic_Association,
7230 N_Handled_Sequence_Of_Statements,
7231 N_Index_Or_Discriminant_Constraint,
7234 N_Modular_Type_Definition,
7235 N_Number_Declaration,
7236 N_Ordinary_Fixed_Point_Definition,
7238 N_Package_Specification,
7239 N_Parameter_Association,
7240 N_Parameter_Specification,
7242 N_Protected_Definition,
7244 N_Real_Range_Specification,
7245 N_Record_Definition,
7246 N_Signed_Integer_Type_Definition,
7247 N_Single_Protected_Declaration,
7250 N_Triggering_Alternative,
7252 N_Validate_Unchecked_Conversion,
7258 for Node_Kind'Size use 8;
7259 -- The data structures in Atree assume this!
7261 ----------------------------
7262 -- Node Class Definitions --
7263 ----------------------------
7265 subtype N_Access_To_Subprogram_Definition is Node_Kind range
7266 N_Access_Function_Definition ..
7267 N_Access_Procedure_Definition;
7269 subtype N_Array_Type_Definition is Node_Kind range
7270 N_Constrained_Array_Definition ..
7271 N_Unconstrained_Array_Definition;
7273 subtype N_Binary_Op is Node_Kind range
7275 N_Op_Shift_Right_Arithmetic;
7277 subtype N_Body_Stub is Node_Kind range
7278 N_Package_Body_Stub ..
7281 subtype N_Declaration is Node_Kind range
7282 N_Component_Declaration ..
7283 N_Procedure_Specification;
7284 -- Note: this includes all constructs normally thought of as declarations
7285 -- except those which are separately grouped as later declarations.
7287 subtype N_Delay_Statement is Node_Kind range
7288 N_Delay_Relative_Statement ..
7289 N_Delay_Until_Statement;
7291 subtype N_Direct_Name is Node_Kind range
7293 N_Character_Literal;
7295 subtype N_Entity is Node_Kind range
7296 N_Defining_Character_Literal ..
7297 N_Defining_Operator_Symbol;
7299 subtype N_Formal_Subprogram_Declaration is Node_Kind range
7300 N_Formal_Abstract_Subprogram_Declaration ..
7301 N_Formal_Concrete_Subprogram_Declaration;
7303 subtype N_Generic_Declaration is Node_Kind range
7304 N_Generic_Package_Declaration ..
7305 N_Generic_Subprogram_Declaration;
7307 subtype N_Generic_Instantiation is Node_Kind range
7308 N_Function_Instantiation ..
7309 N_Package_Instantiation;
7311 subtype N_Generic_Renaming_Declaration is Node_Kind range
7312 N_Generic_Function_Renaming_Declaration ..
7313 N_Generic_Procedure_Renaming_Declaration;
7315 subtype N_Has_Chars is Node_Kind range
7316 N_Attribute_Definition_Clause ..
7319 subtype N_Has_Entity is Node_Kind range
7321 N_Attribute_Reference;
7322 -- Nodes that have Entity fields
7323 -- Warning: DOES NOT INCLUDE N_Freeze_Entity!
7325 subtype N_Has_Etype is Node_Kind range
7327 N_Subtype_Indication;
7329 subtype N_Has_Treat_Fixed_As_Integer is Node_Kind range
7333 subtype N_Multiplying_Operator is Node_Kind range
7337 subtype N_Later_Decl_Item is Node_Kind range
7338 N_Task_Type_Declaration ..
7339 N_Generic_Subprogram_Declaration;
7340 -- Note: this is Ada 83 relevant only (see Ada 83 RM 3.9 (2)) and
7341 -- includes only those items which can appear as later declarative
7342 -- items. This also includes N_Implicit_Label_Declaration which is
7343 -- not specifically in the grammar but may appear as a valid later
7344 -- declarative items. It does NOT include N_Pragma which can also
7345 -- appear among later declarative items. It does however include
7346 -- N_Protected_Body, which is a bit peculiar, but harmless since
7347 -- this cannot appear in Ada 83 mode anyway.
7349 subtype N_Membership_Test is Node_Kind range
7353 subtype N_Op is Node_Kind range
7357 subtype N_Op_Boolean is Node_Kind range
7360 -- Binary operators which take operands of a boolean type, and yield
7361 -- a result of a boolean type.
7363 subtype N_Op_Compare is Node_Kind range
7367 subtype N_Op_Shift is Node_Kind range
7369 N_Op_Shift_Right_Arithmetic;
7371 subtype N_Proper_Body is Node_Kind range
7375 subtype N_Push_xxx_Label is Node_Kind range
7376 N_Push_Constraint_Error_Label ..
7377 N_Push_Storage_Error_Label;
7379 subtype N_Pop_xxx_Label is Node_Kind range
7380 N_Pop_Constraint_Error_Label ..
7381 N_Pop_Storage_Error_Label;
7383 subtype N_Push_Pop_xxx_Label is Node_Kind range
7384 N_Push_Constraint_Error_Label ..
7385 N_Pop_Storage_Error_Label;
7387 subtype N_Raise_xxx_Error is Node_Kind range
7388 N_Raise_Constraint_Error ..
7389 N_Raise_Storage_Error;
7391 subtype N_Renaming_Declaration is Node_Kind range
7392 N_Exception_Renaming_Declaration ..
7393 N_Generic_Procedure_Renaming_Declaration;
7395 subtype N_Representation_Clause is Node_Kind range
7397 N_Attribute_Definition_Clause;
7399 subtype N_Statement_Other_Than_Procedure_Call is Node_Kind range
7400 N_Abort_Statement ..
7402 -- Note that this includes all statement types except for the cases of the
7403 -- N_Procedure_Call_Statement which is considered to be a subexpression
7404 -- (since overloading is possible, so it needs to go through the normal
7405 -- overloading resolution for expressions).
7407 subtype N_Subprogram_Instantiation is Node_Kind range
7408 N_Function_Instantiation ..
7409 N_Procedure_Instantiation;
7411 subtype N_Has_Condition is Node_Kind range
7413 N_Terminate_Alternative;
7414 -- Nodes with condition fields (does not include N_Raise_xxx_Error)
7416 subtype N_Subexpr is Node_Kind range
7418 N_Unchecked_Type_Conversion;
7419 -- Nodes with expression fields
7421 subtype N_Subprogram_Specification is Node_Kind range
7422 N_Function_Specification ..
7423 N_Procedure_Specification;
7425 subtype N_Unary_Op is Node_Kind range
7429 subtype N_Unit_Body is Node_Kind range
7433 ---------------------------
7434 -- Node Access Functions --
7435 ---------------------------
7437 -- The following functions return the contents of the indicated field of
7438 -- the node referenced by the argument, which is a Node_Id. They provide
7439 -- logical access to fields in the node which could be accessed using the
7440 -- Atree.Unchecked_Access package, but the idea is always to use these
7441 -- higher level routines which preserve strong typing. In debug mode,
7442 -- these routines check that they are being applied to an appropriate
7443 -- node, as well as checking that the node is in range.
7445 function ABE_Is_Certain
7446 (N : Node_Id) return Boolean; -- Flag18
7448 function Abort_Present
7449 (N : Node_Id) return Boolean; -- Flag15
7451 function Abortable_Part
7452 (N : Node_Id) return Node_Id; -- Node2
7454 function Abstract_Present
7455 (N : Node_Id) return Boolean; -- Flag4
7457 function Accept_Handler_Records
7458 (N : Node_Id) return List_Id; -- List5
7460 function Accept_Statement
7461 (N : Node_Id) return Node_Id; -- Node2
7463 function Access_Definition
7464 (N : Node_Id) return Node_Id; -- Node3
7466 function Access_To_Subprogram_Definition
7467 (N : Node_Id) return Node_Id; -- Node3
7469 function Access_Types_To_Process
7470 (N : Node_Id) return Elist_Id; -- Elist2
7473 (N : Node_Id) return List_Id; -- List1
7475 function Activation_Chain_Entity
7476 (N : Node_Id) return Node_Id; -- Node3
7478 function Acts_As_Spec
7479 (N : Node_Id) return Boolean; -- Flag4
7481 function Actual_Designated_Subtype
7482 (N : Node_Id) return Node_Id; -- Node4
7484 function Address_Warning_Posted
7485 (N : Node_Id) return Boolean; -- Flag18
7487 function Aggregate_Bounds
7488 (N : Node_Id) return Node_Id; -- Node3
7490 function Aliased_Present
7491 (N : Node_Id) return Boolean; -- Flag4
7494 (N : Node_Id) return Boolean; -- Flag11
7496 function All_Present
7497 (N : Node_Id) return Boolean; -- Flag15
7499 function Alternatives
7500 (N : Node_Id) return List_Id; -- List4
7502 function Ancestor_Part
7503 (N : Node_Id) return Node_Id; -- Node3
7505 function Array_Aggregate
7506 (N : Node_Id) return Node_Id; -- Node3
7508 function Assignment_OK
7509 (N : Node_Id) return Boolean; -- Flag15
7511 function Associated_Node
7512 (N : Node_Id) return Node_Id; -- Node4
7514 function At_End_Proc
7515 (N : Node_Id) return Node_Id; -- Node1
7517 function Attribute_Name
7518 (N : Node_Id) return Name_Id; -- Name2
7520 function Aux_Decls_Node
7521 (N : Node_Id) return Node_Id; -- Node5
7523 function Backwards_OK
7524 (N : Node_Id) return Boolean; -- Flag6
7526 function Bad_Is_Detected
7527 (N : Node_Id) return Boolean; -- Flag15
7530 (N : Node_Id) return Boolean; -- Flag5
7532 function Body_Required
7533 (N : Node_Id) return Boolean; -- Flag13
7535 function Body_To_Inline
7536 (N : Node_Id) return Node_Id; -- Node3
7538 function Box_Present
7539 (N : Node_Id) return Boolean; -- Flag15
7541 function Char_Literal_Value
7542 (N : Node_Id) return Uint; -- Uint2
7545 (N : Node_Id) return Name_Id; -- Name1
7547 function Check_Address_Alignment
7548 (N : Node_Id) return Boolean; -- Flag11
7550 function Choice_Parameter
7551 (N : Node_Id) return Node_Id; -- Node2
7554 (N : Node_Id) return List_Id; -- List1
7556 function Coextensions
7557 (N : Node_Id) return Elist_Id; -- Elist4
7559 function Comes_From_Extended_Return_Statement
7560 (N : Node_Id) return Boolean; -- Flag18
7562 function Compile_Time_Known_Aggregate
7563 (N : Node_Id) return Boolean; -- Flag18
7565 function Component_Associations
7566 (N : Node_Id) return List_Id; -- List2
7568 function Component_Clauses
7569 (N : Node_Id) return List_Id; -- List3
7571 function Component_Definition
7572 (N : Node_Id) return Node_Id; -- Node4
7574 function Component_Items
7575 (N : Node_Id) return List_Id; -- List3
7577 function Component_List
7578 (N : Node_Id) return Node_Id; -- Node1
7580 function Component_Name
7581 (N : Node_Id) return Node_Id; -- Node1
7584 (N : Node_Id) return Node_Id; -- Node1
7586 function Condition_Actions
7587 (N : Node_Id) return List_Id; -- List3
7589 function Config_Pragmas
7590 (N : Node_Id) return List_Id; -- List4
7592 function Constant_Present
7593 (N : Node_Id) return Boolean; -- Flag17
7596 (N : Node_Id) return Node_Id; -- Node3
7598 function Constraints
7599 (N : Node_Id) return List_Id; -- List1
7601 function Context_Installed
7602 (N : Node_Id) return Boolean; -- Flag13
7604 function Context_Items
7605 (N : Node_Id) return List_Id; -- List1
7607 function Controlling_Argument
7608 (N : Node_Id) return Node_Id; -- Node1
7610 function Conversion_OK
7611 (N : Node_Id) return Boolean; -- Flag14
7613 function Corresponding_Body
7614 (N : Node_Id) return Node_Id; -- Node5
7616 function Corresponding_Formal_Spec
7617 (N : Node_Id) return Node_Id; -- Node3
7619 function Corresponding_Generic_Association
7620 (N : Node_Id) return Node_Id; -- Node5
7622 function Corresponding_Integer_Value
7623 (N : Node_Id) return Uint; -- Uint4
7625 function Corresponding_Spec
7626 (N : Node_Id) return Node_Id; -- Node5
7628 function Corresponding_Stub
7629 (N : Node_Id) return Node_Id; -- Node3
7631 function Dcheck_Function
7632 (N : Node_Id) return Entity_Id; -- Node5
7634 function Debug_Statement
7635 (N : Node_Id) return Node_Id; -- Node3
7637 function Declarations
7638 (N : Node_Id) return List_Id; -- List2
7640 function Default_Expression
7641 (N : Node_Id) return Node_Id; -- Node5
7643 function Default_Name
7644 (N : Node_Id) return Node_Id; -- Node2
7646 function Defining_Identifier
7647 (N : Node_Id) return Entity_Id; -- Node1
7649 function Defining_Unit_Name
7650 (N : Node_Id) return Node_Id; -- Node1
7652 function Delay_Alternative
7653 (N : Node_Id) return Node_Id; -- Node4
7655 function Delay_Statement
7656 (N : Node_Id) return Node_Id; -- Node2
7658 function Delta_Expression
7659 (N : Node_Id) return Node_Id; -- Node3
7661 function Digits_Expression
7662 (N : Node_Id) return Node_Id; -- Node2
7664 function Discr_Check_Funcs_Built
7665 (N : Node_Id) return Boolean; -- Flag11
7667 function Discrete_Choices
7668 (N : Node_Id) return List_Id; -- List4
7670 function Discrete_Range
7671 (N : Node_Id) return Node_Id; -- Node4
7673 function Discrete_Subtype_Definition
7674 (N : Node_Id) return Node_Id; -- Node4
7676 function Discrete_Subtype_Definitions
7677 (N : Node_Id) return List_Id; -- List2
7679 function Discriminant_Specifications
7680 (N : Node_Id) return List_Id; -- List4
7682 function Discriminant_Type
7683 (N : Node_Id) return Node_Id; -- Node5
7685 function Do_Accessibility_Check
7686 (N : Node_Id) return Boolean; -- Flag13
7688 function Do_Discriminant_Check
7689 (N : Node_Id) return Boolean; -- Flag13
7691 function Do_Division_Check
7692 (N : Node_Id) return Boolean; -- Flag13
7694 function Do_Length_Check
7695 (N : Node_Id) return Boolean; -- Flag4
7697 function Do_Overflow_Check
7698 (N : Node_Id) return Boolean; -- Flag17
7700 function Do_Range_Check
7701 (N : Node_Id) return Boolean; -- Flag9
7703 function Do_Storage_Check
7704 (N : Node_Id) return Boolean; -- Flag17
7706 function Do_Tag_Check
7707 (N : Node_Id) return Boolean; -- Flag13
7709 function Elaborate_All_Desirable
7710 (N : Node_Id) return Boolean; -- Flag9
7712 function Elaborate_All_Present
7713 (N : Node_Id) return Boolean; -- Flag14
7715 function Elaborate_Desirable
7716 (N : Node_Id) return Boolean; -- Flag11
7718 function Elaborate_Present
7719 (N : Node_Id) return Boolean; -- Flag4
7721 function Elaboration_Boolean
7722 (N : Node_Id) return Node_Id; -- Node2
7724 function Else_Actions
7725 (N : Node_Id) return List_Id; -- List3
7727 function Else_Statements
7728 (N : Node_Id) return List_Id; -- List4
7730 function Elsif_Parts
7731 (N : Node_Id) return List_Id; -- List3
7733 function Enclosing_Variant
7734 (N : Node_Id) return Node_Id; -- Node2
7737 (N : Node_Id) return Node_Id; -- Node4
7740 (N : Node_Id) return Uint; -- Uint5
7743 (N : Node_Id) return Node_Id; -- Node4
7745 function Entity_Or_Associated_Node
7746 (N : Node_Id) return Node_Id; -- Node4
7748 function Entry_Body_Formal_Part
7749 (N : Node_Id) return Node_Id; -- Node5
7751 function Entry_Call_Alternative
7752 (N : Node_Id) return Node_Id; -- Node1
7754 function Entry_Call_Statement
7755 (N : Node_Id) return Node_Id; -- Node1
7757 function Entry_Direct_Name
7758 (N : Node_Id) return Node_Id; -- Node1
7760 function Entry_Index
7761 (N : Node_Id) return Node_Id; -- Node5
7763 function Entry_Index_Specification
7764 (N : Node_Id) return Node_Id; -- Node4
7767 (N : Node_Id) return Node_Id; -- Node5
7769 function Exception_Choices
7770 (N : Node_Id) return List_Id; -- List4
7772 function Exception_Handlers
7773 (N : Node_Id) return List_Id; -- List5
7775 function Exception_Junk
7776 (N : Node_Id) return Boolean; -- Flag8
7778 function Exception_Label
7779 (N : Node_Id) return Node_Id; -- Node5
7781 function Explicit_Actual_Parameter
7782 (N : Node_Id) return Node_Id; -- Node3
7784 function Expansion_Delayed
7785 (N : Node_Id) return Boolean; -- Flag11
7787 function Explicit_Generic_Actual_Parameter
7788 (N : Node_Id) return Node_Id; -- Node1
7791 (N : Node_Id) return Node_Id; -- Node3
7793 function Expressions
7794 (N : Node_Id) return List_Id; -- List1
7797 (N : Node_Id) return Node_Id; -- Node3
7799 function First_Inlined_Subprogram
7800 (N : Node_Id) return Entity_Id; -- Node3
7803 (N : Node_Id) return Boolean; -- Flag5
7805 function First_Named_Actual
7806 (N : Node_Id) return Node_Id; -- Node4
7808 function First_Real_Statement
7809 (N : Node_Id) return Node_Id; -- Node2
7811 function First_Subtype_Link
7812 (N : Node_Id) return Entity_Id; -- Node5
7814 function Float_Truncate
7815 (N : Node_Id) return Boolean; -- Flag11
7817 function Formal_Type_Definition
7818 (N : Node_Id) return Node_Id; -- Node3
7820 function Forwards_OK
7821 (N : Node_Id) return Boolean; -- Flag5
7823 function From_At_End
7824 (N : Node_Id) return Boolean; -- Flag4
7826 function From_At_Mod
7827 (N : Node_Id) return Boolean; -- Flag4
7829 function From_Default
7830 (N : Node_Id) return Boolean; -- Flag6
7832 function Generic_Associations
7833 (N : Node_Id) return List_Id; -- List3
7835 function Generic_Formal_Declarations
7836 (N : Node_Id) return List_Id; -- List2
7838 function Generic_Parent
7839 (N : Node_Id) return Node_Id; -- Node5
7841 function Generic_Parent_Type
7842 (N : Node_Id) return Node_Id; -- Node4
7844 function Handled_Statement_Sequence
7845 (N : Node_Id) return Node_Id; -- Node4
7847 function Handler_List_Entry
7848 (N : Node_Id) return Node_Id; -- Node2
7850 function Has_Created_Identifier
7851 (N : Node_Id) return Boolean; -- Flag15
7853 function Has_Dynamic_Length_Check
7854 (N : Node_Id) return Boolean; -- Flag10
7856 function Has_Dynamic_Range_Check
7857 (N : Node_Id) return Boolean; -- Flag12
7859 function Has_Init_Expression
7860 (N : Node_Id) return Boolean; -- Flag14
7862 function Has_Local_Raise
7863 (N : Node_Id) return Boolean; -- Flag8
7865 function Has_No_Elaboration_Code
7866 (N : Node_Id) return Boolean; -- Flag17
7868 function Has_Priority_Pragma
7869 (N : Node_Id) return Boolean; -- Flag6
7871 function Has_Private_View
7872 (N : Node_Id) return Boolean; -- Flag11
7874 function Has_Relative_Deadline_Pragma
7875 (N : Node_Id) return Boolean; -- Flag9
7877 function Has_Self_Reference
7878 (N : Node_Id) return Boolean; -- Flag13
7880 function Has_Storage_Size_Pragma
7881 (N : Node_Id) return Boolean; -- Flag5
7883 function Has_Task_Info_Pragma
7884 (N : Node_Id) return Boolean; -- Flag7
7886 function Has_Task_Name_Pragma
7887 (N : Node_Id) return Boolean; -- Flag8
7889 function Has_Wide_Character
7890 (N : Node_Id) return Boolean; -- Flag11
7892 function Hidden_By_Use_Clause
7893 (N : Node_Id) return Elist_Id; -- Elist4
7896 (N : Node_Id) return Node_Id; -- Node2
7899 (N : Node_Id) return Node_Id; -- Node1
7901 function Interface_List
7902 (N : Node_Id) return List_Id; -- List2
7904 function Interface_Present
7905 (N : Node_Id) return Boolean; -- Flag16
7907 function Implicit_With
7908 (N : Node_Id) return Boolean; -- Flag16
7911 (N : Node_Id) return Boolean; -- Flag15
7913 function Includes_Infinities
7914 (N : Node_Id) return Boolean; -- Flag11
7916 function Instance_Spec
7917 (N : Node_Id) return Node_Id; -- Node5
7920 (N : Node_Id) return Uint; -- Uint3
7922 function Is_Asynchronous_Call_Block
7923 (N : Node_Id) return Boolean; -- Flag7
7925 function Is_Component_Left_Opnd
7926 (N : Node_Id) return Boolean; -- Flag13
7928 function Is_Component_Right_Opnd
7929 (N : Node_Id) return Boolean; -- Flag14
7931 function Is_Controlling_Actual
7932 (N : Node_Id) return Boolean; -- Flag16
7934 function Is_Dynamic_Coextension
7935 (N : Node_Id) return Boolean; -- Flag18
7937 function Is_Entry_Barrier_Function
7938 (N : Node_Id) return Boolean; -- Flag8
7940 function Is_Expanded_Build_In_Place_Call
7941 (N : Node_Id) return Boolean; -- Flag11
7943 function Is_Folded_In_Parser
7944 (N : Node_Id) return Boolean; -- Flag4
7946 function Is_In_Discriminant_Check
7947 (N : Node_Id) return Boolean; -- Flag11
7949 function Is_Machine_Number
7950 (N : Node_Id) return Boolean; -- Flag11
7952 function Is_Null_Loop
7953 (N : Node_Id) return Boolean; -- Flag16
7955 function Is_Overloaded
7956 (N : Node_Id) return Boolean; -- Flag5
7958 function Is_Power_Of_2_For_Shift
7959 (N : Node_Id) return Boolean; -- Flag13
7961 function Is_Protected_Subprogram_Body
7962 (N : Node_Id) return Boolean; -- Flag7
7964 function Is_Static_Coextension
7965 (N : Node_Id) return Boolean; -- Flag14
7967 function Is_Static_Expression
7968 (N : Node_Id) return Boolean; -- Flag6
7970 function Is_Subprogram_Descriptor
7971 (N : Node_Id) return Boolean; -- Flag16
7973 function Is_Task_Allocation_Block
7974 (N : Node_Id) return Boolean; -- Flag6
7976 function Is_Task_Master
7977 (N : Node_Id) return Boolean; -- Flag5
7979 function Iteration_Scheme
7980 (N : Node_Id) return Node_Id; -- Node2
7983 (N : Node_Id) return Entity_Id; -- Node1
7985 function Kill_Range_Check
7986 (N : Node_Id) return Boolean; -- Flag11
7988 function Label_Construct
7989 (N : Node_Id) return Node_Id; -- Node2
7992 (N : Node_Id) return Node_Id; -- Node2
7995 (N : Node_Id) return Node_Id; -- Node4
7998 (N : Node_Id) return Boolean; -- Flag6
8000 function Library_Unit
8001 (N : Node_Id) return Node_Id; -- Node4
8003 function Limited_View_Installed
8004 (N : Node_Id) return Boolean; -- Flag18
8006 function Limited_Present
8007 (N : Node_Id) return Boolean; -- Flag17
8010 (N : Node_Id) return List_Id; -- List1
8012 function Local_Raise_Not_OK
8013 (N : Node_Id) return Boolean; -- Flag7
8015 function Local_Raise_Statements
8016 (N : Node_Id) return Elist_Id; -- Elist1
8018 function Loop_Actions
8019 (N : Node_Id) return List_Id; -- List2
8021 function Loop_Parameter_Specification
8022 (N : Node_Id) return Node_Id; -- Node4
8025 (N : Node_Id) return Node_Id; -- Node1
8028 (N : Node_Id) return Node_Id; -- Node2
8031 (N : Node_Id) return Boolean; -- Flag5
8033 function Must_Be_Byte_Aligned
8034 (N : Node_Id) return Boolean; -- Flag14
8036 function Must_Not_Freeze
8037 (N : Node_Id) return Boolean; -- Flag8
8039 function Must_Not_Override
8040 (N : Node_Id) return Boolean; -- Flag15
8042 function Must_Override
8043 (N : Node_Id) return Boolean; -- Flag14
8046 (N : Node_Id) return Node_Id; -- Node2
8049 (N : Node_Id) return List_Id; -- List2
8051 function Next_Entity
8052 (N : Node_Id) return Node_Id; -- Node2
8054 function Next_Named_Actual
8055 (N : Node_Id) return Node_Id; -- Node4
8057 function Next_Pragma
8058 (N : Node_Id) return Node_Id; -- Node1
8060 function Next_Rep_Item
8061 (N : Node_Id) return Node_Id; -- Node5
8063 function Next_Use_Clause
8064 (N : Node_Id) return Node_Id; -- Node3
8066 function No_Ctrl_Actions
8067 (N : Node_Id) return Boolean; -- Flag7
8069 function No_Elaboration_Check
8070 (N : Node_Id) return Boolean; -- Flag14
8072 function No_Entities_Ref_In_Spec
8073 (N : Node_Id) return Boolean; -- Flag8
8075 function No_Initialization
8076 (N : Node_Id) return Boolean; -- Flag13
8078 function No_Truncation
8079 (N : Node_Id) return Boolean; -- Flag17
8081 function Null_Present
8082 (N : Node_Id) return Boolean; -- Flag13
8084 function Null_Exclusion_Present
8085 (N : Node_Id) return Boolean; -- Flag11
8087 function Null_Record_Present
8088 (N : Node_Id) return Boolean; -- Flag17
8090 function Object_Definition
8091 (N : Node_Id) return Node_Id; -- Node4
8093 function Original_Discriminant
8094 (N : Node_Id) return Node_Id; -- Node2
8096 function Original_Entity
8097 (N : Node_Id) return Entity_Id; -- Node2
8099 function Others_Discrete_Choices
8100 (N : Node_Id) return List_Id; -- List1
8102 function Out_Present
8103 (N : Node_Id) return Boolean; -- Flag17
8105 function Parameter_Associations
8106 (N : Node_Id) return List_Id; -- List3
8108 function Parameter_List_Truncated
8109 (N : Node_Id) return Boolean; -- Flag17
8111 function Parameter_Specifications
8112 (N : Node_Id) return List_Id; -- List3
8114 function Parameter_Type
8115 (N : Node_Id) return Node_Id; -- Node2
8117 function Parent_Spec
8118 (N : Node_Id) return Node_Id; -- Node4
8120 function PPC_Enabled
8121 (N : Node_Id) return Boolean; -- Flag5
8124 (N : Node_Id) return Node_Id; -- Node2
8126 function Pragma_Argument_Associations
8127 (N : Node_Id) return List_Id; -- List2
8129 function Pragma_Identifier
8130 (N : Node_Id) return Node_Id; -- Node4
8132 function Pragmas_After
8133 (N : Node_Id) return List_Id; -- List5
8135 function Pragmas_Before
8136 (N : Node_Id) return List_Id; -- List4
8139 (N : Node_Id) return Node_Id; -- Node3
8141 function Present_Expr
8142 (N : Node_Id) return Uint; -- Uint3
8145 (N : Node_Id) return Boolean; -- Flag6
8147 function Print_In_Hex
8148 (N : Node_Id) return Boolean; -- Flag13
8150 function Private_Declarations
8151 (N : Node_Id) return List_Id; -- List3
8153 function Private_Present
8154 (N : Node_Id) return Boolean; -- Flag15
8156 function Procedure_To_Call
8157 (N : Node_Id) return Node_Id; -- Node2
8159 function Proper_Body
8160 (N : Node_Id) return Node_Id; -- Node1
8162 function Protected_Definition
8163 (N : Node_Id) return Node_Id; -- Node3
8165 function Protected_Present
8166 (N : Node_Id) return Boolean; -- Flag6
8168 function Raises_Constraint_Error
8169 (N : Node_Id) return Boolean; -- Flag7
8171 function Range_Constraint
8172 (N : Node_Id) return Node_Id; -- Node4
8174 function Range_Expression
8175 (N : Node_Id) return Node_Id; -- Node4
8177 function Real_Range_Specification
8178 (N : Node_Id) return Node_Id; -- Node4
8181 (N : Node_Id) return Ureal; -- Ureal3
8184 (N : Node_Id) return Uint; -- Uint3
8186 function Record_Extension_Part
8187 (N : Node_Id) return Node_Id; -- Node3
8189 function Redundant_Use
8190 (N : Node_Id) return Boolean; -- Flag13
8192 function Renaming_Exception
8193 (N : Node_Id) return Node_Id; -- Node2
8195 function Result_Definition
8196 (N : Node_Id) return Node_Id; -- Node4
8198 function Return_Object_Declarations
8199 (N : Node_Id) return List_Id; -- List3
8201 function Return_Statement_Entity
8202 (N : Node_Id) return Node_Id; -- Node5
8204 function Reverse_Present
8205 (N : Node_Id) return Boolean; -- Flag15
8208 (N : Node_Id) return Node_Id; -- Node3
8210 function Rounded_Result
8211 (N : Node_Id) return Boolean; -- Flag18
8214 (N : Node_Id) return Node_Id; -- Node3
8216 function Select_Alternatives
8217 (N : Node_Id) return List_Id; -- List1
8219 function Selector_Name
8220 (N : Node_Id) return Node_Id; -- Node2
8222 function Selector_Names
8223 (N : Node_Id) return List_Id; -- List1
8225 function Shift_Count_OK
8226 (N : Node_Id) return Boolean; -- Flag4
8228 function Source_Type
8229 (N : Node_Id) return Entity_Id; -- Node1
8231 function Specification
8232 (N : Node_Id) return Node_Id; -- Node1
8235 (N : Node_Id) return List_Id; -- List3
8237 function Static_Processing_OK
8238 (N : Node_Id) return Boolean; -- Flag4
8240 function Storage_Pool
8241 (N : Node_Id) return Node_Id; -- Node1
8244 (N : Node_Id) return String_Id; -- Str3
8246 function Subtype_Indication
8247 (N : Node_Id) return Node_Id; -- Node5
8249 function Subtype_Mark
8250 (N : Node_Id) return Node_Id; -- Node4
8252 function Subtype_Marks
8253 (N : Node_Id) return List_Id; -- List2
8255 function Synchronized_Present
8256 (N : Node_Id) return Boolean; -- Flag7
8258 function Tagged_Present
8259 (N : Node_Id) return Boolean; -- Flag15
8261 function Target_Type
8262 (N : Node_Id) return Entity_Id; -- Node2
8264 function Task_Definition
8265 (N : Node_Id) return Node_Id; -- Node3
8267 function Task_Present
8268 (N : Node_Id) return Boolean; -- Flag5
8270 function Then_Actions
8271 (N : Node_Id) return List_Id; -- List2
8273 function Then_Statements
8274 (N : Node_Id) return List_Id; -- List2
8276 function Treat_Fixed_As_Integer
8277 (N : Node_Id) return Boolean; -- Flag14
8279 function Triggering_Alternative
8280 (N : Node_Id) return Node_Id; -- Node1
8282 function Triggering_Statement
8283 (N : Node_Id) return Node_Id; -- Node1
8286 (N : Node_Id) return Elist_Id; -- Elist3
8288 function Type_Definition
8289 (N : Node_Id) return Node_Id; -- Node3
8292 (N : Node_Id) return Node_Id; -- Node2
8294 function Unknown_Discriminants_Present
8295 (N : Node_Id) return Boolean; -- Flag13
8297 function Unreferenced_In_Spec
8298 (N : Node_Id) return Boolean; -- Flag7
8300 function Variant_Part
8301 (N : Node_Id) return Node_Id; -- Node4
8304 (N : Node_Id) return List_Id; -- List1
8306 function Visible_Declarations
8307 (N : Node_Id) return List_Id; -- List2
8309 function Was_Originally_Stub
8310 (N : Node_Id) return Boolean; -- Flag13
8312 function Zero_Cost_Handling
8313 (N : Node_Id) return Boolean; -- Flag5
8315 -- End functions (note used by xsinfo utility program to end processing)
8317 ----------------------------
8318 -- Node Update Procedures --
8319 ----------------------------
8321 -- These are the corresponding node update routines, which again provide
8322 -- a high level logical access with type checking. In addition to setting
8323 -- the indicated field of the node N to the given Val, in the case of
8324 -- tree pointers (List1-4), the parent pointer of the Val node is set to
8325 -- point back to node N. This automates the setting of the parent pointer.
8327 procedure Set_ABE_Is_Certain
8328 (N : Node_Id; Val : Boolean := True); -- Flag18
8330 procedure Set_Abort_Present
8331 (N : Node_Id; Val : Boolean := True); -- Flag15
8333 procedure Set_Abortable_Part
8334 (N : Node_Id; Val : Node_Id); -- Node2
8336 procedure Set_Abstract_Present
8337 (N : Node_Id; Val : Boolean := True); -- Flag4
8339 procedure Set_Accept_Handler_Records
8340 (N : Node_Id; Val : List_Id); -- List5
8342 procedure Set_Accept_Statement
8343 (N : Node_Id; Val : Node_Id); -- Node2
8345 procedure Set_Access_Definition
8346 (N : Node_Id; Val : Node_Id); -- Node3
8348 procedure Set_Access_To_Subprogram_Definition
8349 (N : Node_Id; Val : Node_Id); -- Node3
8351 procedure Set_Access_Types_To_Process
8352 (N : Node_Id; Val : Elist_Id); -- Elist2
8354 procedure Set_Actions
8355 (N : Node_Id; Val : List_Id); -- List1
8357 procedure Set_Activation_Chain_Entity
8358 (N : Node_Id; Val : Node_Id); -- Node3
8360 procedure Set_Acts_As_Spec
8361 (N : Node_Id; Val : Boolean := True); -- Flag4
8363 procedure Set_Actual_Designated_Subtype
8364 (N : Node_Id; Val : Node_Id); -- Node4
8366 procedure Set_Address_Warning_Posted
8367 (N : Node_Id; Val : Boolean := True); -- Flag18
8369 procedure Set_Aggregate_Bounds
8370 (N : Node_Id; Val : Node_Id); -- Node3
8372 procedure Set_Aliased_Present
8373 (N : Node_Id; Val : Boolean := True); -- Flag4
8375 procedure Set_All_Others
8376 (N : Node_Id; Val : Boolean := True); -- Flag11
8378 procedure Set_All_Present
8379 (N : Node_Id; Val : Boolean := True); -- Flag15
8381 procedure Set_Alternatives
8382 (N : Node_Id; Val : List_Id); -- List4
8384 procedure Set_Ancestor_Part
8385 (N : Node_Id; Val : Node_Id); -- Node3
8387 procedure Set_Array_Aggregate
8388 (N : Node_Id; Val : Node_Id); -- Node3
8390 procedure Set_Assignment_OK
8391 (N : Node_Id; Val : Boolean := True); -- Flag15
8393 procedure Set_Associated_Node
8394 (N : Node_Id; Val : Node_Id); -- Node4
8396 procedure Set_Attribute_Name
8397 (N : Node_Id; Val : Name_Id); -- Name2
8399 procedure Set_At_End_Proc
8400 (N : Node_Id; Val : Node_Id); -- Node1
8402 procedure Set_Aux_Decls_Node
8403 (N : Node_Id; Val : Node_Id); -- Node5
8405 procedure Set_Backwards_OK
8406 (N : Node_Id; Val : Boolean := True); -- Flag6
8408 procedure Set_Bad_Is_Detected
8409 (N : Node_Id; Val : Boolean := True); -- Flag15
8411 procedure Set_Body_Required
8412 (N : Node_Id; Val : Boolean := True); -- Flag13
8414 procedure Set_Body_To_Inline
8415 (N : Node_Id; Val : Node_Id); -- Node3
8417 procedure Set_Box_Present
8418 (N : Node_Id; Val : Boolean := True); -- Flag15
8420 procedure Set_By_Ref
8421 (N : Node_Id; Val : Boolean := True); -- Flag5
8423 procedure Set_Char_Literal_Value
8424 (N : Node_Id; Val : Uint); -- Uint2
8427 (N : Node_Id; Val : Name_Id); -- Name1
8429 procedure Set_Check_Address_Alignment
8430 (N : Node_Id; Val : Boolean := True); -- Flag11
8432 procedure Set_Choice_Parameter
8433 (N : Node_Id; Val : Node_Id); -- Node2
8435 procedure Set_Coextensions
8436 (N : Node_Id; Val : Elist_Id); -- Elist4
8438 procedure Set_Choices
8439 (N : Node_Id; Val : List_Id); -- List1
8441 procedure Set_Comes_From_Extended_Return_Statement
8442 (N : Node_Id; Val : Boolean := True); -- Flag18
8444 procedure Set_Compile_Time_Known_Aggregate
8445 (N : Node_Id; Val : Boolean := True); -- Flag18
8447 procedure Set_Component_Associations
8448 (N : Node_Id; Val : List_Id); -- List2
8450 procedure Set_Component_Clauses
8451 (N : Node_Id; Val : List_Id); -- List3
8453 procedure Set_Component_Definition
8454 (N : Node_Id; Val : Node_Id); -- Node4
8456 procedure Set_Component_Items
8457 (N : Node_Id; Val : List_Id); -- List3
8459 procedure Set_Component_List
8460 (N : Node_Id; Val : Node_Id); -- Node1
8462 procedure Set_Component_Name
8463 (N : Node_Id; Val : Node_Id); -- Node1
8465 procedure Set_Condition
8466 (N : Node_Id; Val : Node_Id); -- Node1
8468 procedure Set_Condition_Actions
8469 (N : Node_Id; Val : List_Id); -- List3
8471 procedure Set_Config_Pragmas
8472 (N : Node_Id; Val : List_Id); -- List4
8474 procedure Set_Constant_Present
8475 (N : Node_Id; Val : Boolean := True); -- Flag17
8477 procedure Set_Constraint
8478 (N : Node_Id; Val : Node_Id); -- Node3
8480 procedure Set_Constraints
8481 (N : Node_Id; Val : List_Id); -- List1
8483 procedure Set_Context_Installed
8484 (N : Node_Id; Val : Boolean := True); -- Flag13
8486 procedure Set_Context_Items
8487 (N : Node_Id; Val : List_Id); -- List1
8489 procedure Set_Controlling_Argument
8490 (N : Node_Id; Val : Node_Id); -- Node1
8492 procedure Set_Conversion_OK
8493 (N : Node_Id; Val : Boolean := True); -- Flag14
8495 procedure Set_Corresponding_Body
8496 (N : Node_Id; Val : Node_Id); -- Node5
8498 procedure Set_Corresponding_Formal_Spec
8499 (N : Node_Id; Val : Node_Id); -- Node3
8501 procedure Set_Corresponding_Generic_Association
8502 (N : Node_Id; Val : Node_Id); -- Node5
8504 procedure Set_Corresponding_Integer_Value
8505 (N : Node_Id; Val : Uint); -- Uint4
8507 procedure Set_Corresponding_Spec
8508 (N : Node_Id; Val : Node_Id); -- Node5
8510 procedure Set_Corresponding_Stub
8511 (N : Node_Id; Val : Node_Id); -- Node3
8513 procedure Set_Dcheck_Function
8514 (N : Node_Id; Val : Entity_Id); -- Node5
8516 procedure Set_Debug_Statement
8517 (N : Node_Id; Val : Node_Id); -- Node3
8519 procedure Set_Declarations
8520 (N : Node_Id; Val : List_Id); -- List2
8522 procedure Set_Default_Expression
8523 (N : Node_Id; Val : Node_Id); -- Node5
8525 procedure Set_Default_Name
8526 (N : Node_Id; Val : Node_Id); -- Node2
8528 procedure Set_Defining_Identifier
8529 (N : Node_Id; Val : Entity_Id); -- Node1
8531 procedure Set_Defining_Unit_Name
8532 (N : Node_Id; Val : Node_Id); -- Node1
8534 procedure Set_Delay_Alternative
8535 (N : Node_Id; Val : Node_Id); -- Node4
8537 procedure Set_Delay_Statement
8538 (N : Node_Id; Val : Node_Id); -- Node2
8540 procedure Set_Delta_Expression
8541 (N : Node_Id; Val : Node_Id); -- Node3
8543 procedure Set_Digits_Expression
8544 (N : Node_Id; Val : Node_Id); -- Node2
8546 procedure Set_Discr_Check_Funcs_Built
8547 (N : Node_Id; Val : Boolean := True); -- Flag11
8549 procedure Set_Discrete_Choices
8550 (N : Node_Id; Val : List_Id); -- List4
8552 procedure Set_Discrete_Range
8553 (N : Node_Id; Val : Node_Id); -- Node4
8555 procedure Set_Discrete_Subtype_Definition
8556 (N : Node_Id; Val : Node_Id); -- Node4
8558 procedure Set_Discrete_Subtype_Definitions
8559 (N : Node_Id; Val : List_Id); -- List2
8561 procedure Set_Discriminant_Specifications
8562 (N : Node_Id; Val : List_Id); -- List4
8564 procedure Set_Discriminant_Type
8565 (N : Node_Id; Val : Node_Id); -- Node5
8567 procedure Set_Do_Accessibility_Check
8568 (N : Node_Id; Val : Boolean := True); -- Flag13
8570 procedure Set_Do_Discriminant_Check
8571 (N : Node_Id; Val : Boolean := True); -- Flag13
8573 procedure Set_Do_Division_Check
8574 (N : Node_Id; Val : Boolean := True); -- Flag13
8576 procedure Set_Do_Length_Check
8577 (N : Node_Id; Val : Boolean := True); -- Flag4
8579 procedure Set_Do_Overflow_Check
8580 (N : Node_Id; Val : Boolean := True); -- Flag17
8582 procedure Set_Do_Range_Check
8583 (N : Node_Id; Val : Boolean := True); -- Flag9
8585 procedure Set_Do_Storage_Check
8586 (N : Node_Id; Val : Boolean := True); -- Flag17
8588 procedure Set_Do_Tag_Check
8589 (N : Node_Id; Val : Boolean := True); -- Flag13
8591 procedure Set_Elaborate_All_Desirable
8592 (N : Node_Id; Val : Boolean := True); -- Flag9
8594 procedure Set_Elaborate_All_Present
8595 (N : Node_Id; Val : Boolean := True); -- Flag14
8597 procedure Set_Elaborate_Desirable
8598 (N : Node_Id; Val : Boolean := True); -- Flag11
8600 procedure Set_Elaborate_Present
8601 (N : Node_Id; Val : Boolean := True); -- Flag4
8603 procedure Set_Elaboration_Boolean
8604 (N : Node_Id; Val : Node_Id); -- Node2
8606 procedure Set_Else_Actions
8607 (N : Node_Id; Val : List_Id); -- List3
8609 procedure Set_Else_Statements
8610 (N : Node_Id; Val : List_Id); -- List4
8612 procedure Set_Elsif_Parts
8613 (N : Node_Id; Val : List_Id); -- List3
8615 procedure Set_Enclosing_Variant
8616 (N : Node_Id; Val : Node_Id); -- Node2
8618 procedure Set_End_Label
8619 (N : Node_Id; Val : Node_Id); -- Node4
8621 procedure Set_End_Span
8622 (N : Node_Id; Val : Uint); -- Uint5
8624 procedure Set_Entity
8625 (N : Node_Id; Val : Node_Id); -- Node4
8627 procedure Set_Entry_Body_Formal_Part
8628 (N : Node_Id; Val : Node_Id); -- Node5
8630 procedure Set_Entry_Call_Alternative
8631 (N : Node_Id; Val : Node_Id); -- Node1
8633 procedure Set_Entry_Call_Statement
8634 (N : Node_Id; Val : Node_Id); -- Node1
8636 procedure Set_Entry_Direct_Name
8637 (N : Node_Id; Val : Node_Id); -- Node1
8639 procedure Set_Entry_Index
8640 (N : Node_Id; Val : Node_Id); -- Node5
8642 procedure Set_Entry_Index_Specification
8643 (N : Node_Id; Val : Node_Id); -- Node4
8646 (N : Node_Id; Val : Node_Id); -- Node5
8648 procedure Set_Exception_Choices
8649 (N : Node_Id; Val : List_Id); -- List4
8651 procedure Set_Exception_Handlers
8652 (N : Node_Id; Val : List_Id); -- List5
8654 procedure Set_Exception_Junk
8655 (N : Node_Id; Val : Boolean := True); -- Flag8
8657 procedure Set_Exception_Label
8658 (N : Node_Id; Val : Node_Id); -- Node5
8660 procedure Set_Expansion_Delayed
8661 (N : Node_Id; Val : Boolean := True); -- Flag11
8663 procedure Set_Explicit_Actual_Parameter
8664 (N : Node_Id; Val : Node_Id); -- Node3
8666 procedure Set_Explicit_Generic_Actual_Parameter
8667 (N : Node_Id; Val : Node_Id); -- Node1
8669 procedure Set_Expression
8670 (N : Node_Id; Val : Node_Id); -- Node3
8672 procedure Set_Expressions
8673 (N : Node_Id; Val : List_Id); -- List1
8675 procedure Set_First_Bit
8676 (N : Node_Id; Val : Node_Id); -- Node3
8678 procedure Set_First_Inlined_Subprogram
8679 (N : Node_Id; Val : Entity_Id); -- Node3
8681 procedure Set_First_Name
8682 (N : Node_Id; Val : Boolean := True); -- Flag5
8684 procedure Set_First_Named_Actual
8685 (N : Node_Id; Val : Node_Id); -- Node4
8687 procedure Set_First_Real_Statement
8688 (N : Node_Id; Val : Node_Id); -- Node2
8690 procedure Set_First_Subtype_Link
8691 (N : Node_Id; Val : Entity_Id); -- Node5
8693 procedure Set_Float_Truncate
8694 (N : Node_Id; Val : Boolean := True); -- Flag11
8696 procedure Set_Formal_Type_Definition
8697 (N : Node_Id; Val : Node_Id); -- Node3
8699 procedure Set_Forwards_OK
8700 (N : Node_Id; Val : Boolean := True); -- Flag5
8702 procedure Set_From_At_Mod
8703 (N : Node_Id; Val : Boolean := True); -- Flag4
8705 procedure Set_From_At_End
8706 (N : Node_Id; Val : Boolean := True); -- Flag4
8708 procedure Set_From_Default
8709 (N : Node_Id; Val : Boolean := True); -- Flag6
8711 procedure Set_Generic_Associations
8712 (N : Node_Id; Val : List_Id); -- List3
8714 procedure Set_Generic_Formal_Declarations
8715 (N : Node_Id; Val : List_Id); -- List2
8717 procedure Set_Generic_Parent
8718 (N : Node_Id; Val : Node_Id); -- Node5
8720 procedure Set_Generic_Parent_Type
8721 (N : Node_Id; Val : Node_Id); -- Node4
8723 procedure Set_Handled_Statement_Sequence
8724 (N : Node_Id; Val : Node_Id); -- Node4
8726 procedure Set_Handler_List_Entry
8727 (N : Node_Id; Val : Node_Id); -- Node2
8729 procedure Set_Has_Created_Identifier
8730 (N : Node_Id; Val : Boolean := True); -- Flag15
8732 procedure Set_Has_Dynamic_Length_Check
8733 (N : Node_Id; Val : Boolean := True); -- Flag10
8735 procedure Set_Has_Dynamic_Range_Check
8736 (N : Node_Id; Val : Boolean := True); -- Flag12
8738 procedure Set_Has_Init_Expression
8739 (N : Node_Id; Val : Boolean := True); -- Flag14
8741 procedure Set_Has_Local_Raise
8742 (N : Node_Id; Val : Boolean := True); -- Flag8
8744 procedure Set_Has_No_Elaboration_Code
8745 (N : Node_Id; Val : Boolean := True); -- Flag17
8747 procedure Set_Has_Priority_Pragma
8748 (N : Node_Id; Val : Boolean := True); -- Flag6
8750 procedure Set_Has_Private_View
8751 (N : Node_Id; Val : Boolean := True); -- Flag11
8753 procedure Set_Has_Relative_Deadline_Pragma
8754 (N : Node_Id; Val : Boolean := True); -- Flag9
8756 procedure Set_Has_Self_Reference
8757 (N : Node_Id; Val : Boolean := True); -- Flag13
8759 procedure Set_Has_Storage_Size_Pragma
8760 (N : Node_Id; Val : Boolean := True); -- Flag5
8762 procedure Set_Has_Task_Info_Pragma
8763 (N : Node_Id; Val : Boolean := True); -- Flag7
8765 procedure Set_Has_Task_Name_Pragma
8766 (N : Node_Id; Val : Boolean := True); -- Flag8
8768 procedure Set_Has_Wide_Character
8769 (N : Node_Id; Val : Boolean := True); -- Flag11
8771 procedure Set_Hidden_By_Use_Clause
8772 (N : Node_Id; Val : Elist_Id); -- Elist4
8774 procedure Set_High_Bound
8775 (N : Node_Id; Val : Node_Id); -- Node2
8777 procedure Set_Identifier
8778 (N : Node_Id; Val : Node_Id); -- Node1
8780 procedure Set_Interface_List
8781 (N : Node_Id; Val : List_Id); -- List2
8783 procedure Set_Interface_Present
8784 (N : Node_Id; Val : Boolean := True); -- Flag16
8786 procedure Set_Implicit_With
8787 (N : Node_Id; Val : Boolean := True); -- Flag16
8789 procedure Set_In_Present
8790 (N : Node_Id; Val : Boolean := True); -- Flag15
8792 procedure Set_Includes_Infinities
8793 (N : Node_Id; Val : Boolean := True); -- Flag11
8795 procedure Set_Instance_Spec
8796 (N : Node_Id; Val : Node_Id); -- Node5
8798 procedure Set_Intval
8799 (N : Node_Id; Val : Uint); -- Uint3
8801 procedure Set_Is_Asynchronous_Call_Block
8802 (N : Node_Id; Val : Boolean := True); -- Flag7
8804 procedure Set_Is_Component_Left_Opnd
8805 (N : Node_Id; Val : Boolean := True); -- Flag13
8807 procedure Set_Is_Component_Right_Opnd
8808 (N : Node_Id; Val : Boolean := True); -- Flag14
8810 procedure Set_Is_Controlling_Actual
8811 (N : Node_Id; Val : Boolean := True); -- Flag16
8813 procedure Set_Is_Dynamic_Coextension
8814 (N : Node_Id; Val : Boolean := True); -- Flag18
8816 procedure Set_Is_Entry_Barrier_Function
8817 (N : Node_Id; Val : Boolean := True); -- Flag8
8819 procedure Set_Is_Expanded_Build_In_Place_Call
8820 (N : Node_Id; Val : Boolean := True); -- Flag11
8822 procedure Set_Is_Folded_In_Parser
8823 (N : Node_Id; Val : Boolean := True); -- Flag4
8825 procedure Set_Is_In_Discriminant_Check
8826 (N : Node_Id; Val : Boolean := True); -- Flag11
8828 procedure Set_Is_Machine_Number
8829 (N : Node_Id; Val : Boolean := True); -- Flag11
8831 procedure Set_Is_Null_Loop
8832 (N : Node_Id; Val : Boolean := True); -- Flag16
8834 procedure Set_Is_Overloaded
8835 (N : Node_Id; Val : Boolean := True); -- Flag5
8837 procedure Set_Is_Power_Of_2_For_Shift
8838 (N : Node_Id; Val : Boolean := True); -- Flag13
8840 procedure Set_Is_Protected_Subprogram_Body
8841 (N : Node_Id; Val : Boolean := True); -- Flag7
8843 procedure Set_Is_Static_Coextension
8844 (N : Node_Id; Val : Boolean := True); -- Flag14
8846 procedure Set_Is_Static_Expression
8847 (N : Node_Id; Val : Boolean := True); -- Flag6
8849 procedure Set_Is_Subprogram_Descriptor
8850 (N : Node_Id; Val : Boolean := True); -- Flag16
8852 procedure Set_Is_Task_Allocation_Block
8853 (N : Node_Id; Val : Boolean := True); -- Flag6
8855 procedure Set_Is_Task_Master
8856 (N : Node_Id; Val : Boolean := True); -- Flag5
8858 procedure Set_Iteration_Scheme
8859 (N : Node_Id; Val : Node_Id); -- Node2
8862 (N : Node_Id; Val : Entity_Id); -- Node1
8864 procedure Set_Kill_Range_Check
8865 (N : Node_Id; Val : Boolean := True); -- Flag11
8867 procedure Set_Last_Bit
8868 (N : Node_Id; Val : Node_Id); -- Node4
8870 procedure Set_Last_Name
8871 (N : Node_Id; Val : Boolean := True); -- Flag6
8873 procedure Set_Library_Unit
8874 (N : Node_Id; Val : Node_Id); -- Node4
8876 procedure Set_Label_Construct
8877 (N : Node_Id; Val : Node_Id); -- Node2
8879 procedure Set_Left_Opnd
8880 (N : Node_Id; Val : Node_Id); -- Node2
8882 procedure Set_Limited_View_Installed
8883 (N : Node_Id; Val : Boolean := True); -- Flag18
8885 procedure Set_Limited_Present
8886 (N : Node_Id; Val : Boolean := True); -- Flag17
8888 procedure Set_Literals
8889 (N : Node_Id; Val : List_Id); -- List1
8891 procedure Set_Local_Raise_Not_OK
8892 (N : Node_Id; Val : Boolean := True); -- Flag7
8894 procedure Set_Local_Raise_Statements
8895 (N : Node_Id; Val : Elist_Id); -- Elist1
8897 procedure Set_Loop_Actions
8898 (N : Node_Id; Val : List_Id); -- List2
8900 procedure Set_Loop_Parameter_Specification
8901 (N : Node_Id; Val : Node_Id); -- Node4
8903 procedure Set_Low_Bound
8904 (N : Node_Id; Val : Node_Id); -- Node1
8906 procedure Set_Mod_Clause
8907 (N : Node_Id; Val : Node_Id); -- Node2
8909 procedure Set_More_Ids
8910 (N : Node_Id; Val : Boolean := True); -- Flag5
8912 procedure Set_Must_Be_Byte_Aligned
8913 (N : Node_Id; Val : Boolean := True); -- Flag14
8915 procedure Set_Must_Not_Freeze
8916 (N : Node_Id; Val : Boolean := True); -- Flag8
8918 procedure Set_Must_Not_Override
8919 (N : Node_Id; Val : Boolean := True); -- Flag15
8921 procedure Set_Must_Override
8922 (N : Node_Id; Val : Boolean := True); -- Flag14
8925 (N : Node_Id; Val : Node_Id); -- Node2
8928 (N : Node_Id; Val : List_Id); -- List2
8930 procedure Set_Next_Entity
8931 (N : Node_Id; Val : Node_Id); -- Node2
8933 procedure Set_Next_Named_Actual
8934 (N : Node_Id; Val : Node_Id); -- Node4
8936 procedure Set_Next_Pragma
8937 (N : Node_Id; Val : Node_Id); -- Node1
8939 procedure Set_Next_Rep_Item
8940 (N : Node_Id; Val : Node_Id); -- Node5
8942 procedure Set_Next_Use_Clause
8943 (N : Node_Id; Val : Node_Id); -- Node3
8945 procedure Set_No_Ctrl_Actions
8946 (N : Node_Id; Val : Boolean := True); -- Flag7
8948 procedure Set_No_Elaboration_Check
8949 (N : Node_Id; Val : Boolean := True); -- Flag14
8951 procedure Set_No_Entities_Ref_In_Spec
8952 (N : Node_Id; Val : Boolean := True); -- Flag8
8954 procedure Set_No_Initialization
8955 (N : Node_Id; Val : Boolean := True); -- Flag13
8957 procedure Set_No_Truncation
8958 (N : Node_Id; Val : Boolean := True); -- Flag17
8960 procedure Set_Null_Present
8961 (N : Node_Id; Val : Boolean := True); -- Flag13
8963 procedure Set_Null_Exclusion_Present
8964 (N : Node_Id; Val : Boolean := True); -- Flag11
8966 procedure Set_Null_Record_Present
8967 (N : Node_Id; Val : Boolean := True); -- Flag17
8969 procedure Set_Object_Definition
8970 (N : Node_Id; Val : Node_Id); -- Node4
8972 procedure Set_Original_Discriminant
8973 (N : Node_Id; Val : Node_Id); -- Node2
8975 procedure Set_Original_Entity
8976 (N : Node_Id; Val : Entity_Id); -- Node2
8978 procedure Set_Others_Discrete_Choices
8979 (N : Node_Id; Val : List_Id); -- List1
8981 procedure Set_Out_Present
8982 (N : Node_Id; Val : Boolean := True); -- Flag17
8984 procedure Set_Parameter_Associations
8985 (N : Node_Id; Val : List_Id); -- List3
8987 procedure Set_Parameter_List_Truncated
8988 (N : Node_Id; Val : Boolean := True); -- Flag17
8990 procedure Set_Parameter_Specifications
8991 (N : Node_Id; Val : List_Id); -- List3
8993 procedure Set_Parameter_Type
8994 (N : Node_Id; Val : Node_Id); -- Node2
8996 procedure Set_Parent_Spec
8997 (N : Node_Id; Val : Node_Id); -- Node4
8999 procedure Set_PPC_Enabled
9000 (N : Node_Id; Val : Boolean := True); -- Flag5
9002 procedure Set_Position
9003 (N : Node_Id; Val : Node_Id); -- Node2
9005 procedure Set_Pragma_Argument_Associations
9006 (N : Node_Id; Val : List_Id); -- List2
9008 procedure Set_Pragma_Identifier
9009 (N : Node_Id; Val : Node_Id); -- Node4
9011 procedure Set_Pragmas_After
9012 (N : Node_Id; Val : List_Id); -- List5
9014 procedure Set_Pragmas_Before
9015 (N : Node_Id; Val : List_Id); -- List4
9017 procedure Set_Prefix
9018 (N : Node_Id; Val : Node_Id); -- Node3
9020 procedure Set_Present_Expr
9021 (N : Node_Id; Val : Uint); -- Uint3
9023 procedure Set_Prev_Ids
9024 (N : Node_Id; Val : Boolean := True); -- Flag6
9026 procedure Set_Print_In_Hex
9027 (N : Node_Id; Val : Boolean := True); -- Flag13
9029 procedure Set_Private_Declarations
9030 (N : Node_Id; Val : List_Id); -- List3
9032 procedure Set_Private_Present
9033 (N : Node_Id; Val : Boolean := True); -- Flag15
9035 procedure Set_Procedure_To_Call
9036 (N : Node_Id; Val : Node_Id); -- Node2
9038 procedure Set_Proper_Body
9039 (N : Node_Id; Val : Node_Id); -- Node1
9041 procedure Set_Protected_Definition
9042 (N : Node_Id; Val : Node_Id); -- Node3
9044 procedure Set_Protected_Present
9045 (N : Node_Id; Val : Boolean := True); -- Flag6
9047 procedure Set_Raises_Constraint_Error
9048 (N : Node_Id; Val : Boolean := True); -- Flag7
9050 procedure Set_Range_Constraint
9051 (N : Node_Id; Val : Node_Id); -- Node4
9053 procedure Set_Range_Expression
9054 (N : Node_Id; Val : Node_Id); -- Node4
9056 procedure Set_Real_Range_Specification
9057 (N : Node_Id; Val : Node_Id); -- Node4
9059 procedure Set_Realval
9060 (N : Node_Id; Val : Ureal); -- Ureal3
9062 procedure Set_Reason
9063 (N : Node_Id; Val : Uint); -- Uint3
9065 procedure Set_Record_Extension_Part
9066 (N : Node_Id; Val : Node_Id); -- Node3
9068 procedure Set_Redundant_Use
9069 (N : Node_Id; Val : Boolean := True); -- Flag13
9071 procedure Set_Renaming_Exception
9072 (N : Node_Id; Val : Node_Id); -- Node2
9074 procedure Set_Result_Definition
9075 (N : Node_Id; Val : Node_Id); -- Node4
9077 procedure Set_Return_Object_Declarations
9078 (N : Node_Id; Val : List_Id); -- List3
9080 procedure Set_Return_Statement_Entity
9081 (N : Node_Id; Val : Node_Id); -- Node5
9083 procedure Set_Reverse_Present
9084 (N : Node_Id; Val : Boolean := True); -- Flag15
9086 procedure Set_Right_Opnd
9087 (N : Node_Id; Val : Node_Id); -- Node3
9089 procedure Set_Rounded_Result
9090 (N : Node_Id; Val : Boolean := True); -- Flag18
9093 (N : Node_Id; Val : Node_Id); -- Node3
9095 procedure Set_Select_Alternatives
9096 (N : Node_Id; Val : List_Id); -- List1
9098 procedure Set_Selector_Name
9099 (N : Node_Id; Val : Node_Id); -- Node2
9101 procedure Set_Selector_Names
9102 (N : Node_Id; Val : List_Id); -- List1
9104 procedure Set_Shift_Count_OK
9105 (N : Node_Id; Val : Boolean := True); -- Flag4
9107 procedure Set_Source_Type
9108 (N : Node_Id; Val : Entity_Id); -- Node1
9110 procedure Set_Specification
9111 (N : Node_Id; Val : Node_Id); -- Node1
9113 procedure Set_Statements
9114 (N : Node_Id; Val : List_Id); -- List3
9116 procedure Set_Static_Processing_OK
9117 (N : Node_Id; Val : Boolean); -- Flag4
9119 procedure Set_Storage_Pool
9120 (N : Node_Id; Val : Node_Id); -- Node1
9122 procedure Set_Strval
9123 (N : Node_Id; Val : String_Id); -- Str3
9125 procedure Set_Subtype_Indication
9126 (N : Node_Id; Val : Node_Id); -- Node5
9128 procedure Set_Subtype_Mark
9129 (N : Node_Id; Val : Node_Id); -- Node4
9131 procedure Set_Subtype_Marks
9132 (N : Node_Id; Val : List_Id); -- List2
9134 procedure Set_Synchronized_Present
9135 (N : Node_Id; Val : Boolean := True); -- Flag7
9137 procedure Set_Tagged_Present
9138 (N : Node_Id; Val : Boolean := True); -- Flag15
9140 procedure Set_Target_Type
9141 (N : Node_Id; Val : Entity_Id); -- Node2
9143 procedure Set_Task_Definition
9144 (N : Node_Id; Val : Node_Id); -- Node3
9146 procedure Set_Task_Present
9147 (N : Node_Id; Val : Boolean := True); -- Flag5
9149 procedure Set_Then_Actions
9150 (N : Node_Id; Val : List_Id); -- List2
9152 procedure Set_Then_Statements
9153 (N : Node_Id; Val : List_Id); -- List2
9155 procedure Set_Treat_Fixed_As_Integer
9156 (N : Node_Id; Val : Boolean := True); -- Flag14
9158 procedure Set_Triggering_Alternative
9159 (N : Node_Id; Val : Node_Id); -- Node1
9161 procedure Set_Triggering_Statement
9162 (N : Node_Id; Val : Node_Id); -- Node1
9164 procedure Set_TSS_Elist
9165 (N : Node_Id; Val : Elist_Id); -- Elist3
9167 procedure Set_Type_Definition
9168 (N : Node_Id; Val : Node_Id); -- Node3
9171 (N : Node_Id; Val : Node_Id); -- Node2
9173 procedure Set_Unknown_Discriminants_Present
9174 (N : Node_Id; Val : Boolean := True); -- Flag13
9176 procedure Set_Unreferenced_In_Spec
9177 (N : Node_Id; Val : Boolean := True); -- Flag7
9179 procedure Set_Variant_Part
9180 (N : Node_Id; Val : Node_Id); -- Node4
9182 procedure Set_Variants
9183 (N : Node_Id; Val : List_Id); -- List1
9185 procedure Set_Visible_Declarations
9186 (N : Node_Id; Val : List_Id); -- List2
9188 procedure Set_Was_Originally_Stub
9189 (N : Node_Id; Val : Boolean := True); -- Flag13
9191 procedure Set_Zero_Cost_Handling
9192 (N : Node_Id; Val : Boolean := True); -- Flag5
9194 -------------------------
9195 -- Iterator Procedures --
9196 -------------------------
9198 -- The call to Next_xxx (N) is equivalent to N := Next_xxx (N)
9200 procedure Next_Entity (N : in out Node_Id);
9201 procedure Next_Named_Actual (N : in out Node_Id);
9202 procedure Next_Rep_Item (N : in out Node_Id);
9203 procedure Next_Use_Clause (N : in out Node_Id);
9205 --------------------------------------
9206 -- Logical Access to End_Span Field --
9207 --------------------------------------
9209 function End_Location (N : Node_Id) return Source_Ptr;
9210 -- N is an N_If_Statement or N_Case_Statement node, and this
9211 -- function returns the location of the IF token in the END IF
9212 -- sequence by translating the value of the End_Span field.
9214 procedure Set_End_Location (N : Node_Id; S : Source_Ptr);
9215 -- N is an N_If_Statement or N_Case_Statement node. This procedure
9216 -- sets the End_Span field to correspond to the given value S. In
9217 -- other words, End_Span is set to the difference between S and
9218 -- Sloc (N), the starting location.
9220 --------------------------------
9221 -- Node_Kind Membership Tests --
9222 --------------------------------
9224 -- The following functions allow a convenient notation for testing whether
9225 -- a Node_Kind value matches any one of a list of possible values. In each
9226 -- case True is returned if the given T argument is equal to any of the V
9227 -- arguments. Note that there is a similar set of functions defined in
9228 -- Atree where the first argument is a Node_Id whose Nkind field is tested.
9233 V2 : Node_Kind) return Boolean;
9239 V3 : Node_Kind) return Boolean;
9246 V4 : Node_Kind) return Boolean;
9254 V5 : Node_Kind) return Boolean;
9263 V6 : Node_Kind) return Boolean;
9273 V7 : Node_Kind) return Boolean;
9284 V8 : Node_Kind) return Boolean;
9286 pragma Inline (Nkind_In);
9287 -- Inline all above functions
9289 -----------------------
9290 -- Utility Functions --
9291 -----------------------
9293 function Pragma_Name (N : Node_Id) return Name_Id;
9294 pragma Inline (Pragma_Name);
9295 -- Convenient function to obtain Chars field of Pragma_Identifier
9297 -----------------------------
9298 -- Syntactic Parent Tables --
9299 -----------------------------
9301 -- These tables show for each node, and for each of the five fields,
9302 -- whether the corresponding field is syntactic (True) or semantic (False).
9303 -- Unused entries are also set to False.
9305 subtype Field_Num is Natural range 1 .. 5;
9307 Is_Syntactic_Field : constant array (Node_Kind, Field_Num) of Boolean := (
9309 -- Following entries can be built automatically from the sinfo sources
9310 -- using the makeisf utility (currently this program is in spitbol).
9313 (1 => True, -- Chars (Name1)
9314 2 => False, -- Original_Discriminant (Node2-Sem)
9315 3 => False, -- unused
9316 4 => False, -- Entity (Node4-Sem)
9317 5 => False), -- Etype (Node5-Sem)
9319 N_Integer_Literal =>
9320 (1 => False, -- unused
9321 2 => False, -- Original_Entity (Node2-Sem)
9322 3 => True, -- Intval (Uint3)
9323 4 => False, -- unused
9324 5 => False), -- Etype (Node5-Sem)
9327 (1 => False, -- unused
9328 2 => False, -- Original_Entity (Node2-Sem)
9329 3 => True, -- Realval (Ureal3)
9330 4 => False, -- Corresponding_Integer_Value (Uint4-Sem)
9331 5 => False), -- Etype (Node5-Sem)
9333 N_Character_Literal =>
9334 (1 => True, -- Chars (Name1)
9335 2 => True, -- Char_Literal_Value (Uint2)
9336 3 => False, -- unused
9337 4 => False, -- Entity (Node4-Sem)
9338 5 => False), -- Etype (Node5-Sem)
9341 (1 => False, -- unused
9342 2 => False, -- unused
9343 3 => True, -- Strval (Str3)
9344 4 => False, -- unused
9345 5 => False), -- Etype (Node5-Sem)
9348 (1 => False, -- Next_Pragma (Node1-Sem)
9349 2 => True, -- Pragma_Argument_Associations (List2)
9350 3 => True, -- Debug_Statement (Node3)
9351 4 => True, -- Pragma_Identifier (Node4)
9352 5 => False), -- Next_Rep_Item (Node5-Sem)
9354 N_Pragma_Argument_Association =>
9355 (1 => True, -- Chars (Name1)
9356 2 => False, -- unused
9357 3 => True, -- Expression (Node3)
9358 4 => False, -- unused
9359 5 => False), -- unused
9361 N_Defining_Identifier =>
9362 (1 => True, -- Chars (Name1)
9363 2 => False, -- Next_Entity (Node2-Sem)
9364 3 => False, -- Scope (Node3-Sem)
9365 4 => False, -- unused
9366 5 => False), -- Etype (Node5-Sem)
9368 N_Full_Type_Declaration =>
9369 (1 => True, -- Defining_Identifier (Node1)
9370 2 => False, -- unused
9371 3 => True, -- Type_Definition (Node3)
9372 4 => True, -- Discriminant_Specifications (List4)
9373 5 => False), -- unused
9375 N_Subtype_Declaration =>
9376 (1 => True, -- Defining_Identifier (Node1)
9377 2 => False, -- unused
9378 3 => False, -- unused
9379 4 => False, -- Generic_Parent_Type (Node4-Sem)
9380 5 => True), -- Subtype_Indication (Node5)
9382 N_Subtype_Indication =>
9383 (1 => False, -- unused
9384 2 => False, -- unused
9385 3 => True, -- Constraint (Node3)
9386 4 => True, -- Subtype_Mark (Node4)
9387 5 => False), -- Etype (Node5-Sem)
9389 N_Object_Declaration =>
9390 (1 => True, -- Defining_Identifier (Node1)
9391 2 => False, -- Handler_List_Entry (Node2-Sem)
9392 3 => True, -- Expression (Node3)
9393 4 => True, -- Object_Definition (Node4)
9394 5 => False), -- Corresponding_Generic_Association (Node5-Sem)
9396 N_Number_Declaration =>
9397 (1 => True, -- Defining_Identifier (Node1)
9398 2 => False, -- unused
9399 3 => True, -- Expression (Node3)
9400 4 => False, -- unused
9401 5 => False), -- unused
9403 N_Derived_Type_Definition =>
9404 (1 => False, -- unused
9405 2 => True, -- Interface_List (List2)
9406 3 => True, -- Record_Extension_Part (Node3)
9407 4 => False, -- unused
9408 5 => True), -- Subtype_Indication (Node5)
9410 N_Range_Constraint =>
9411 (1 => False, -- unused
9412 2 => False, -- unused
9413 3 => False, -- unused
9414 4 => True, -- Range_Expression (Node4)
9415 5 => False), -- unused
9418 (1 => True, -- Low_Bound (Node1)
9419 2 => True, -- High_Bound (Node2)
9420 3 => False, -- unused
9421 4 => False, -- unused
9422 5 => False), -- Etype (Node5-Sem)
9424 N_Enumeration_Type_Definition =>
9425 (1 => True, -- Literals (List1)
9426 2 => False, -- unused
9427 3 => False, -- unused
9428 4 => True, -- End_Label (Node4)
9429 5 => False), -- unused
9431 N_Defining_Character_Literal =>
9432 (1 => True, -- Chars (Name1)
9433 2 => False, -- Next_Entity (Node2-Sem)
9434 3 => False, -- Scope (Node3-Sem)
9435 4 => False, -- unused
9436 5 => False), -- Etype (Node5-Sem)
9438 N_Signed_Integer_Type_Definition =>
9439 (1 => True, -- Low_Bound (Node1)
9440 2 => True, -- High_Bound (Node2)
9441 3 => False, -- unused
9442 4 => False, -- unused
9443 5 => False), -- unused
9445 N_Modular_Type_Definition =>
9446 (1 => False, -- unused
9447 2 => False, -- unused
9448 3 => True, -- Expression (Node3)
9449 4 => False, -- unused
9450 5 => False), -- unused
9452 N_Floating_Point_Definition =>
9453 (1 => False, -- unused
9454 2 => True, -- Digits_Expression (Node2)
9455 3 => False, -- unused
9456 4 => True, -- Real_Range_Specification (Node4)
9457 5 => False), -- unused
9459 N_Real_Range_Specification =>
9460 (1 => True, -- Low_Bound (Node1)
9461 2 => True, -- High_Bound (Node2)
9462 3 => False, -- unused
9463 4 => False, -- unused
9464 5 => False), -- unused
9466 N_Ordinary_Fixed_Point_Definition =>
9467 (1 => False, -- unused
9468 2 => False, -- unused
9469 3 => True, -- Delta_Expression (Node3)
9470 4 => True, -- Real_Range_Specification (Node4)
9471 5 => False), -- unused
9473 N_Decimal_Fixed_Point_Definition =>
9474 (1 => False, -- unused
9475 2 => True, -- Digits_Expression (Node2)
9476 3 => True, -- Delta_Expression (Node3)
9477 4 => True, -- Real_Range_Specification (Node4)
9478 5 => False), -- unused
9480 N_Digits_Constraint =>
9481 (1 => False, -- unused
9482 2 => True, -- Digits_Expression (Node2)
9483 3 => False, -- unused
9484 4 => True, -- Range_Constraint (Node4)
9485 5 => False), -- unused
9487 N_Unconstrained_Array_Definition =>
9488 (1 => False, -- unused
9489 2 => True, -- Subtype_Marks (List2)
9490 3 => False, -- unused
9491 4 => True, -- Component_Definition (Node4)
9492 5 => False), -- unused
9494 N_Constrained_Array_Definition =>
9495 (1 => False, -- unused
9496 2 => True, -- Discrete_Subtype_Definitions (List2)
9497 3 => False, -- unused
9498 4 => True, -- Component_Definition (Node4)
9499 5 => False), -- unused
9501 N_Component_Definition =>
9502 (1 => False, -- unused
9503 2 => False, -- unused
9504 3 => True, -- Access_Definition (Node3)
9505 4 => False, -- unused
9506 5 => True), -- Subtype_Indication (Node5)
9508 N_Discriminant_Specification =>
9509 (1 => True, -- Defining_Identifier (Node1)
9510 2 => False, -- unused
9511 3 => True, -- Expression (Node3)
9512 4 => False, -- unused
9513 5 => True), -- Discriminant_Type (Node5)
9515 N_Index_Or_Discriminant_Constraint =>
9516 (1 => True, -- Constraints (List1)
9517 2 => False, -- unused
9518 3 => False, -- unused
9519 4 => False, -- unused
9520 5 => False), -- unused
9522 N_Discriminant_Association =>
9523 (1 => True, -- Selector_Names (List1)
9524 2 => False, -- unused
9525 3 => True, -- Expression (Node3)
9526 4 => False, -- unused
9527 5 => False), -- unused
9529 N_Record_Definition =>
9530 (1 => True, -- Component_List (Node1)
9531 2 => True, -- Interface_List (List2)
9532 3 => False, -- unused
9533 4 => True, -- End_Label (Node4)
9534 5 => False), -- unused
9537 (1 => False, -- unused
9538 2 => False, -- unused
9539 3 => True, -- Component_Items (List3)
9540 4 => True, -- Variant_Part (Node4)
9541 5 => False), -- unused
9543 N_Component_Declaration =>
9544 (1 => True, -- Defining_Identifier (Node1)
9545 2 => False, -- unused
9546 3 => True, -- Expression (Node3)
9547 4 => True, -- Component_Definition (Node4)
9548 5 => False), -- unused
9551 (1 => True, -- Variants (List1)
9552 2 => True, -- Name (Node2)
9553 3 => False, -- unused
9554 4 => False, -- unused
9555 5 => False), -- unused
9558 (1 => True, -- Component_List (Node1)
9559 2 => False, -- Enclosing_Variant (Node2-Sem)
9560 3 => False, -- Present_Expr (Uint3-Sem)
9561 4 => True, -- Discrete_Choices (List4)
9562 5 => False), -- Dcheck_Function (Node5-Sem)
9565 (1 => False, -- Others_Discrete_Choices (List1-Sem)
9566 2 => False, -- unused
9567 3 => False, -- unused
9568 4 => False, -- unused
9569 5 => False), -- unused
9571 N_Access_To_Object_Definition =>
9572 (1 => False, -- unused
9573 2 => False, -- unused
9574 3 => False, -- unused
9575 4 => False, -- unused
9576 5 => True), -- Subtype_Indication (Node5)
9578 N_Access_Function_Definition =>
9579 (1 => False, -- unused
9580 2 => False, -- unused
9581 3 => True, -- Parameter_Specifications (List3)
9582 4 => True, -- Result_Definition (Node4)
9583 5 => False), -- unused
9585 N_Access_Procedure_Definition =>
9586 (1 => False, -- unused
9587 2 => False, -- unused
9588 3 => True, -- Parameter_Specifications (List3)
9589 4 => False, -- unused
9590 5 => False), -- unused
9592 N_Access_Definition =>
9593 (1 => False, -- unused
9594 2 => False, -- unused
9595 3 => True, -- Access_To_Subprogram_Definition (Node3)
9596 4 => True, -- Subtype_Mark (Node4)
9597 5 => False), -- unused
9599 N_Incomplete_Type_Declaration =>
9600 (1 => True, -- Defining_Identifier (Node1)
9601 2 => False, -- unused
9602 3 => False, -- unused
9603 4 => True, -- Discriminant_Specifications (List4)
9604 5 => False), -- unused
9606 N_Explicit_Dereference =>
9607 (1 => False, -- unused
9608 2 => False, -- unused
9609 3 => True, -- Prefix (Node3)
9610 4 => False, -- Actual_Designated_Subtype (Node4-Sem)
9611 5 => False), -- Etype (Node5-Sem)
9613 N_Indexed_Component =>
9614 (1 => True, -- Expressions (List1)
9615 2 => False, -- unused
9616 3 => True, -- Prefix (Node3)
9617 4 => False, -- unused
9618 5 => False), -- Etype (Node5-Sem)
9621 (1 => False, -- unused
9622 2 => False, -- unused
9623 3 => True, -- Prefix (Node3)
9624 4 => True, -- Discrete_Range (Node4)
9625 5 => False), -- Etype (Node5-Sem)
9627 N_Selected_Component =>
9628 (1 => False, -- unused
9629 2 => True, -- Selector_Name (Node2)
9630 3 => True, -- Prefix (Node3)
9631 4 => False, -- unused
9632 5 => False), -- Etype (Node5-Sem)
9634 N_Attribute_Reference =>
9635 (1 => True, -- Expressions (List1)
9636 2 => True, -- Attribute_Name (Name2)
9637 3 => True, -- Prefix (Node3)
9638 4 => False, -- Entity (Node4-Sem)
9639 5 => False), -- Etype (Node5-Sem)
9642 (1 => True, -- Expressions (List1)
9643 2 => True, -- Component_Associations (List2)
9644 3 => False, -- Aggregate_Bounds (Node3-Sem)
9645 4 => False, -- unused
9646 5 => False), -- Etype (Node5-Sem)
9648 N_Component_Association =>
9649 (1 => True, -- Choices (List1)
9650 2 => False, -- Loop_Actions (List2-Sem)
9651 3 => True, -- Expression (Node3)
9652 4 => False, -- unused
9653 5 => False), -- unused
9655 N_Extension_Aggregate =>
9656 (1 => True, -- Expressions (List1)
9657 2 => True, -- Component_Associations (List2)
9658 3 => True, -- Ancestor_Part (Node3)
9659 4 => False, -- unused
9660 5 => False), -- Etype (Node5-Sem)
9663 (1 => False, -- unused
9664 2 => False, -- unused
9665 3 => False, -- unused
9666 4 => False, -- unused
9667 5 => False), -- Etype (Node5-Sem)
9670 (1 => False, -- Actions (List1-Sem)
9671 2 => True, -- Left_Opnd (Node2)
9672 3 => True, -- Right_Opnd (Node3)
9673 4 => False, -- unused
9674 5 => False), -- Etype (Node5-Sem)
9677 (1 => False, -- Actions (List1-Sem)
9678 2 => True, -- Left_Opnd (Node2)
9679 3 => True, -- Right_Opnd (Node3)
9680 4 => False, -- unused
9681 5 => False), -- Etype (Node5-Sem)
9684 (1 => False, -- unused
9685 2 => True, -- Left_Opnd (Node2)
9686 3 => True, -- Right_Opnd (Node3)
9687 4 => False, -- unused
9688 5 => False), -- Etype (Node5-Sem)
9691 (1 => False, -- unused
9692 2 => True, -- Left_Opnd (Node2)
9693 3 => True, -- Right_Opnd (Node3)
9694 4 => False, -- unused
9695 5 => False), -- Etype (Node5-Sem)
9698 (1 => True, -- Chars (Name1)
9699 2 => True, -- Left_Opnd (Node2)
9700 3 => True, -- Right_Opnd (Node3)
9701 4 => False, -- Entity (Node4-Sem)
9702 5 => False), -- Etype (Node5-Sem)
9705 (1 => True, -- Chars (Name1)
9706 2 => True, -- Left_Opnd (Node2)
9707 3 => True, -- Right_Opnd (Node3)
9708 4 => False, -- Entity (Node4-Sem)
9709 5 => False), -- Etype (Node5-Sem)
9712 (1 => True, -- Chars (Name1)
9713 2 => True, -- Left_Opnd (Node2)
9714 3 => True, -- Right_Opnd (Node3)
9715 4 => False, -- Entity (Node4-Sem)
9716 5 => False), -- Etype (Node5-Sem)
9719 (1 => True, -- Chars (Name1)
9720 2 => True, -- Left_Opnd (Node2)
9721 3 => True, -- Right_Opnd (Node3)
9722 4 => False, -- Entity (Node4-Sem)
9723 5 => False), -- Etype (Node5-Sem)
9726 (1 => True, -- Chars (Name1)
9727 2 => True, -- Left_Opnd (Node2)
9728 3 => True, -- Right_Opnd (Node3)
9729 4 => False, -- Entity (Node4-Sem)
9730 5 => False), -- Etype (Node5-Sem)
9733 (1 => True, -- Chars (Name1)
9734 2 => True, -- Left_Opnd (Node2)
9735 3 => True, -- Right_Opnd (Node3)
9736 4 => False, -- Entity (Node4-Sem)
9737 5 => False), -- Etype (Node5-Sem)
9740 (1 => True, -- Chars (Name1)
9741 2 => True, -- Left_Opnd (Node2)
9742 3 => True, -- Right_Opnd (Node3)
9743 4 => False, -- Entity (Node4-Sem)
9744 5 => False), -- Etype (Node5-Sem)
9747 (1 => True, -- Chars (Name1)
9748 2 => True, -- Left_Opnd (Node2)
9749 3 => True, -- Right_Opnd (Node3)
9750 4 => False, -- Entity (Node4-Sem)
9751 5 => False), -- Etype (Node5-Sem)
9754 (1 => True, -- Chars (Name1)
9755 2 => True, -- Left_Opnd (Node2)
9756 3 => True, -- Right_Opnd (Node3)
9757 4 => False, -- Entity (Node4-Sem)
9758 5 => False), -- Etype (Node5-Sem)
9761 (1 => True, -- Chars (Name1)
9762 2 => True, -- Left_Opnd (Node2)
9763 3 => True, -- Right_Opnd (Node3)
9764 4 => False, -- Entity (Node4-Sem)
9765 5 => False), -- Etype (Node5-Sem)
9768 (1 => True, -- Chars (Name1)
9769 2 => True, -- Left_Opnd (Node2)
9770 3 => True, -- Right_Opnd (Node3)
9771 4 => False, -- Entity (Node4-Sem)
9772 5 => False), -- Etype (Node5-Sem)
9775 (1 => True, -- Chars (Name1)
9776 2 => True, -- Left_Opnd (Node2)
9777 3 => True, -- Right_Opnd (Node3)
9778 4 => False, -- Entity (Node4-Sem)
9779 5 => False), -- Etype (Node5-Sem)
9782 (1 => True, -- Chars (Name1)
9783 2 => True, -- Left_Opnd (Node2)
9784 3 => True, -- Right_Opnd (Node3)
9785 4 => False, -- Entity (Node4-Sem)
9786 5 => False), -- Etype (Node5-Sem)
9789 (1 => True, -- Chars (Name1)
9790 2 => True, -- Left_Opnd (Node2)
9791 3 => True, -- Right_Opnd (Node3)
9792 4 => False, -- Entity (Node4-Sem)
9793 5 => False), -- Etype (Node5-Sem)
9796 (1 => True, -- Chars (Name1)
9797 2 => True, -- Left_Opnd (Node2)
9798 3 => True, -- Right_Opnd (Node3)
9799 4 => False, -- Entity (Node4-Sem)
9800 5 => False), -- Etype (Node5-Sem)
9803 (1 => True, -- Chars (Name1)
9804 2 => True, -- Left_Opnd (Node2)
9805 3 => True, -- Right_Opnd (Node3)
9806 4 => False, -- Entity (Node4-Sem)
9807 5 => False), -- Etype (Node5-Sem)
9810 (1 => True, -- Chars (Name1)
9811 2 => True, -- Left_Opnd (Node2)
9812 3 => True, -- Right_Opnd (Node3)
9813 4 => False, -- Entity (Node4-Sem)
9814 5 => False), -- Etype (Node5-Sem)
9817 (1 => True, -- Chars (Name1)
9818 2 => False, -- unused
9819 3 => True, -- Right_Opnd (Node3)
9820 4 => False, -- Entity (Node4-Sem)
9821 5 => False), -- Etype (Node5-Sem)
9824 (1 => True, -- Chars (Name1)
9825 2 => False, -- unused
9826 3 => True, -- Right_Opnd (Node3)
9827 4 => False, -- Entity (Node4-Sem)
9828 5 => False), -- Etype (Node5-Sem)
9831 (1 => True, -- Chars (Name1)
9832 2 => False, -- unused
9833 3 => True, -- Right_Opnd (Node3)
9834 4 => False, -- Entity (Node4-Sem)
9835 5 => False), -- Etype (Node5-Sem)
9838 (1 => True, -- Chars (Name1)
9839 2 => False, -- unused
9840 3 => True, -- Right_Opnd (Node3)
9841 4 => False, -- Entity (Node4-Sem)
9842 5 => False), -- Etype (Node5-Sem)
9844 N_Type_Conversion =>
9845 (1 => False, -- unused
9846 2 => False, -- unused
9847 3 => True, -- Expression (Node3)
9848 4 => True, -- Subtype_Mark (Node4)
9849 5 => False), -- Etype (Node5-Sem)
9851 N_Qualified_Expression =>
9852 (1 => False, -- unused
9853 2 => False, -- unused
9854 3 => True, -- Expression (Node3)
9855 4 => True, -- Subtype_Mark (Node4)
9856 5 => False), -- Etype (Node5-Sem)
9859 (1 => False, -- Storage_Pool (Node1-Sem)
9860 2 => False, -- Procedure_To_Call (Node2-Sem)
9861 3 => True, -- Expression (Node3)
9862 4 => False, -- Coextensions (Elist4-Sem)
9863 5 => False), -- Etype (Node5-Sem)
9866 (1 => False, -- unused
9867 2 => False, -- unused
9868 3 => False, -- unused
9869 4 => False, -- unused
9870 5 => False), -- unused
9873 (1 => True, -- Identifier (Node1)
9874 2 => False, -- unused
9875 3 => False, -- unused
9876 4 => False, -- unused
9877 5 => False), -- unused
9879 N_Assignment_Statement =>
9880 (1 => False, -- unused
9881 2 => True, -- Name (Node2)
9882 3 => True, -- Expression (Node3)
9883 4 => False, -- unused
9884 5 => False), -- unused
9887 (1 => True, -- Condition (Node1)
9888 2 => True, -- Then_Statements (List2)
9889 3 => True, -- Elsif_Parts (List3)
9890 4 => True, -- Else_Statements (List4)
9891 5 => True), -- End_Span (Uint5)
9894 (1 => True, -- Condition (Node1)
9895 2 => True, -- Then_Statements (List2)
9896 3 => False, -- Condition_Actions (List3-Sem)
9897 4 => False, -- unused
9898 5 => False), -- unused
9901 (1 => False, -- unused
9902 2 => False, -- unused
9903 3 => True, -- Expression (Node3)
9904 4 => True, -- Alternatives (List4)
9905 5 => True), -- End_Span (Uint5)
9907 N_Case_Statement_Alternative =>
9908 (1 => False, -- unused
9909 2 => False, -- unused
9910 3 => True, -- Statements (List3)
9911 4 => True, -- Discrete_Choices (List4)
9912 5 => False), -- unused
9915 (1 => True, -- Identifier (Node1)
9916 2 => True, -- Iteration_Scheme (Node2)
9917 3 => True, -- Statements (List3)
9918 4 => True, -- End_Label (Node4)
9919 5 => False), -- unused
9921 N_Iteration_Scheme =>
9922 (1 => True, -- Condition (Node1)
9923 2 => False, -- unused
9924 3 => False, -- Condition_Actions (List3-Sem)
9925 4 => True, -- Loop_Parameter_Specification (Node4)
9926 5 => False), -- unused
9928 N_Loop_Parameter_Specification =>
9929 (1 => True, -- Defining_Identifier (Node1)
9930 2 => False, -- unused
9931 3 => False, -- unused
9932 4 => True, -- Discrete_Subtype_Definition (Node4)
9933 5 => False), -- unused
9935 N_Block_Statement =>
9936 (1 => True, -- Identifier (Node1)
9937 2 => True, -- Declarations (List2)
9938 3 => False, -- Activation_Chain_Entity (Node3-Sem)
9939 4 => True, -- Handled_Statement_Sequence (Node4)
9940 5 => False), -- unused
9943 (1 => True, -- Condition (Node1)
9944 2 => True, -- Name (Node2)
9945 3 => False, -- unused
9946 4 => False, -- unused
9947 5 => False), -- unused
9950 (1 => False, -- unused
9951 2 => True, -- Name (Node2)
9952 3 => False, -- unused
9953 4 => False, -- unused
9954 5 => False), -- unused
9956 N_Subprogram_Declaration =>
9957 (1 => True, -- Specification (Node1)
9958 2 => False, -- unused
9959 3 => False, -- Body_To_Inline (Node3-Sem)
9960 4 => False, -- Parent_Spec (Node4-Sem)
9961 5 => False), -- Corresponding_Body (Node5-Sem)
9963 N_Abstract_Subprogram_Declaration =>
9964 (1 => True, -- Specification (Node1)
9965 2 => False, -- unused
9966 3 => False, -- unused
9967 4 => False, -- unused
9968 5 => False), -- unused
9970 N_Function_Specification =>
9971 (1 => True, -- Defining_Unit_Name (Node1)
9972 2 => False, -- Elaboration_Boolean (Node2-Sem)
9973 3 => True, -- Parameter_Specifications (List3)
9974 4 => True, -- Result_Definition (Node4)
9975 5 => False), -- Generic_Parent (Node5-Sem)
9977 N_Procedure_Specification =>
9978 (1 => True, -- Defining_Unit_Name (Node1)
9979 2 => False, -- Elaboration_Boolean (Node2-Sem)
9980 3 => True, -- Parameter_Specifications (List3)
9981 4 => False, -- unused
9982 5 => False), -- Generic_Parent (Node5-Sem)
9985 (1 => True, -- Identifier (Node1)
9986 2 => True, -- Name (Node2)
9987 3 => False, -- unused
9988 4 => False, -- unused
9989 5 => False), -- unused
9991 N_Defining_Program_Unit_Name =>
9992 (1 => True, -- Defining_Identifier (Node1)
9993 2 => True, -- Name (Node2)
9994 3 => False, -- unused
9995 4 => False, -- unused
9996 5 => False), -- unused
9998 N_Operator_Symbol =>
9999 (1 => True, -- Chars (Name1)
10000 2 => False, -- unused
10001 3 => True, -- Strval (Str3)
10002 4 => False, -- Entity (Node4-Sem)
10003 5 => False), -- Etype (Node5-Sem)
10005 N_Defining_Operator_Symbol =>
10006 (1 => True, -- Chars (Name1)
10007 2 => False, -- Next_Entity (Node2-Sem)
10008 3 => False, -- Scope (Node3-Sem)
10009 4 => False, -- unused
10010 5 => False), -- Etype (Node5-Sem)
10012 N_Parameter_Specification =>
10013 (1 => True, -- Defining_Identifier (Node1)
10014 2 => True, -- Parameter_Type (Node2)
10015 3 => True, -- Expression (Node3)
10016 4 => False, -- unused
10017 5 => False), -- Default_Expression (Node5-Sem)
10019 N_Subprogram_Body =>
10020 (1 => True, -- Specification (Node1)
10021 2 => True, -- Declarations (List2)
10022 3 => False, -- Activation_Chain_Entity (Node3-Sem)
10023 4 => True, -- Handled_Statement_Sequence (Node4)
10024 5 => False), -- Corresponding_Spec (Node5-Sem)
10026 N_Procedure_Call_Statement =>
10027 (1 => False, -- Controlling_Argument (Node1-Sem)
10028 2 => True, -- Name (Node2)
10029 3 => True, -- Parameter_Associations (List3)
10030 4 => False, -- First_Named_Actual (Node4-Sem)
10031 5 => False), -- Etype (Node5-Sem)
10034 (1 => False, -- Controlling_Argument (Node1-Sem)
10035 2 => True, -- Name (Node2)
10036 3 => True, -- Parameter_Associations (List3)
10037 4 => False, -- First_Named_Actual (Node4-Sem)
10038 5 => False), -- Etype (Node5-Sem)
10040 N_Parameter_Association =>
10041 (1 => False, -- unused
10042 2 => True, -- Selector_Name (Node2)
10043 3 => True, -- Explicit_Actual_Parameter (Node3)
10044 4 => False, -- Next_Named_Actual (Node4-Sem)
10045 5 => False), -- unused
10047 N_Return_Statement =>
10048 (1 => False, -- Storage_Pool (Node1-Sem)
10049 2 => False, -- Procedure_To_Call (Node2-Sem)
10050 3 => True, -- Expression (Node3)
10051 4 => False, -- unused
10052 5 => False), -- Return_Statement_Entity (Node5-Sem)
10054 N_Extended_Return_Statement =>
10055 (1 => False, -- Storage_Pool (Node1-Sem)
10056 2 => False, -- Procedure_To_Call (Node2-Sem)
10057 3 => True, -- Return_Object_Declarations (List3)
10058 4 => True, -- Handled_Statement_Sequence (Node4)
10059 5 => False), -- Return_Statement_Entity (Node5-Sem)
10061 N_Package_Declaration =>
10062 (1 => True, -- Specification (Node1)
10063 2 => False, -- unused
10064 3 => False, -- Activation_Chain_Entity (Node3-Sem)
10065 4 => False, -- Parent_Spec (Node4-Sem)
10066 5 => False), -- Corresponding_Body (Node5-Sem)
10068 N_Package_Specification =>
10069 (1 => True, -- Defining_Unit_Name (Node1)
10070 2 => True, -- Visible_Declarations (List2)
10071 3 => True, -- Private_Declarations (List3)
10072 4 => True, -- End_Label (Node4)
10073 5 => False), -- Generic_Parent (Node5-Sem)
10076 (1 => True, -- Defining_Unit_Name (Node1)
10077 2 => True, -- Declarations (List2)
10078 3 => False, -- unused
10079 4 => True, -- Handled_Statement_Sequence (Node4)
10080 5 => False), -- Corresponding_Spec (Node5-Sem)
10082 N_Private_Type_Declaration =>
10083 (1 => True, -- Defining_Identifier (Node1)
10084 2 => False, -- unused
10085 3 => False, -- unused
10086 4 => True, -- Discriminant_Specifications (List4)
10087 5 => False), -- unused
10089 N_Private_Extension_Declaration =>
10090 (1 => True, -- Defining_Identifier (Node1)
10091 2 => True, -- Interface_List (List2)
10092 3 => False, -- unused
10093 4 => True, -- Discriminant_Specifications (List4)
10094 5 => True), -- Subtype_Indication (Node5)
10096 N_Use_Package_Clause =>
10097 (1 => False, -- unused
10098 2 => True, -- Names (List2)
10099 3 => False, -- Next_Use_Clause (Node3-Sem)
10100 4 => False, -- Hidden_By_Use_Clause (Elist4-Sem)
10101 5 => False), -- unused
10103 N_Use_Type_Clause =>
10104 (1 => False, -- unused
10105 2 => True, -- Subtype_Marks (List2)
10106 3 => False, -- Next_Use_Clause (Node3-Sem)
10107 4 => False, -- Hidden_By_Use_Clause (Elist4-Sem)
10108 5 => False), -- unused
10110 N_Object_Renaming_Declaration =>
10111 (1 => True, -- Defining_Identifier (Node1)
10112 2 => True, -- Name (Node2)
10113 3 => True, -- Access_Definition (Node3)
10114 4 => True, -- Subtype_Mark (Node4)
10115 5 => False), -- Corresponding_Generic_Association (Node5-Sem)
10117 N_Exception_Renaming_Declaration =>
10118 (1 => True, -- Defining_Identifier (Node1)
10119 2 => True, -- Name (Node2)
10120 3 => False, -- unused
10121 4 => False, -- unused
10122 5 => False), -- unused
10124 N_Package_Renaming_Declaration =>
10125 (1 => True, -- Defining_Unit_Name (Node1)
10126 2 => True, -- Name (Node2)
10127 3 => False, -- unused
10128 4 => False, -- Parent_Spec (Node4-Sem)
10129 5 => False), -- unused
10131 N_Subprogram_Renaming_Declaration =>
10132 (1 => True, -- Specification (Node1)
10133 2 => True, -- Name (Node2)
10134 3 => False, -- Corresponding_Formal_Spec (Node3-Sem)
10135 4 => False, -- Parent_Spec (Node4-Sem)
10136 5 => False), -- Corresponding_Spec (Node5-Sem)
10138 N_Generic_Package_Renaming_Declaration =>
10139 (1 => True, -- Defining_Unit_Name (Node1)
10140 2 => True, -- Name (Node2)
10141 3 => False, -- unused
10142 4 => False, -- Parent_Spec (Node4-Sem)
10143 5 => False), -- unused
10145 N_Generic_Procedure_Renaming_Declaration =>
10146 (1 => True, -- Defining_Unit_Name (Node1)
10147 2 => True, -- Name (Node2)
10148 3 => False, -- unused
10149 4 => False, -- Parent_Spec (Node4-Sem)
10150 5 => False), -- unused
10152 N_Generic_Function_Renaming_Declaration =>
10153 (1 => True, -- Defining_Unit_Name (Node1)
10154 2 => True, -- Name (Node2)
10155 3 => False, -- unused
10156 4 => False, -- Parent_Spec (Node4-Sem)
10157 5 => False), -- unused
10159 N_Task_Type_Declaration =>
10160 (1 => True, -- Defining_Identifier (Node1)
10161 2 => True, -- Interface_List (List2)
10162 3 => True, -- Task_Definition (Node3)
10163 4 => True, -- Discriminant_Specifications (List4)
10164 5 => False), -- Corresponding_Body (Node5-Sem)
10166 N_Single_Task_Declaration =>
10167 (1 => True, -- Defining_Identifier (Node1)
10168 2 => True, -- Interface_List (List2)
10169 3 => True, -- Task_Definition (Node3)
10170 4 => False, -- unused
10171 5 => False), -- unused
10173 N_Task_Definition =>
10174 (1 => False, -- unused
10175 2 => True, -- Visible_Declarations (List2)
10176 3 => True, -- Private_Declarations (List3)
10177 4 => True, -- End_Label (Node4)
10178 5 => False), -- unused
10181 (1 => True, -- Defining_Identifier (Node1)
10182 2 => True, -- Declarations (List2)
10183 3 => False, -- Activation_Chain_Entity (Node3-Sem)
10184 4 => True, -- Handled_Statement_Sequence (Node4)
10185 5 => False), -- Corresponding_Spec (Node5-Sem)
10187 N_Protected_Type_Declaration =>
10188 (1 => True, -- Defining_Identifier (Node1)
10189 2 => True, -- Interface_List (List2)
10190 3 => True, -- Protected_Definition (Node3)
10191 4 => True, -- Discriminant_Specifications (List4)
10192 5 => False), -- Corresponding_Body (Node5-Sem)
10194 N_Single_Protected_Declaration =>
10195 (1 => True, -- Defining_Identifier (Node1)
10196 2 => True, -- Interface_List (List2)
10197 3 => True, -- Protected_Definition (Node3)
10198 4 => False, -- unused
10199 5 => False), -- unused
10201 N_Protected_Definition =>
10202 (1 => False, -- unused
10203 2 => True, -- Visible_Declarations (List2)
10204 3 => True, -- Private_Declarations (List3)
10205 4 => True, -- End_Label (Node4)
10206 5 => False), -- unused
10208 N_Protected_Body =>
10209 (1 => True, -- Defining_Identifier (Node1)
10210 2 => True, -- Declarations (List2)
10211 3 => False, -- unused
10212 4 => True, -- End_Label (Node4)
10213 5 => False), -- Corresponding_Spec (Node5-Sem)
10215 N_Entry_Declaration =>
10216 (1 => True, -- Defining_Identifier (Node1)
10217 2 => False, -- unused
10218 3 => True, -- Parameter_Specifications (List3)
10219 4 => True, -- Discrete_Subtype_Definition (Node4)
10220 5 => False), -- Corresponding_Body (Node5-Sem)
10222 N_Accept_Statement =>
10223 (1 => True, -- Entry_Direct_Name (Node1)
10224 2 => True, -- Declarations (List2)
10225 3 => True, -- Parameter_Specifications (List3)
10226 4 => True, -- Handled_Statement_Sequence (Node4)
10227 5 => True), -- Entry_Index (Node5)
10230 (1 => True, -- Defining_Identifier (Node1)
10231 2 => True, -- Declarations (List2)
10232 3 => False, -- Activation_Chain_Entity (Node3-Sem)
10233 4 => True, -- Handled_Statement_Sequence (Node4)
10234 5 => True), -- Entry_Body_Formal_Part (Node5)
10236 N_Entry_Body_Formal_Part =>
10237 (1 => True, -- Condition (Node1)
10238 2 => False, -- unused
10239 3 => True, -- Parameter_Specifications (List3)
10240 4 => True, -- Entry_Index_Specification (Node4)
10241 5 => False), -- unused
10243 N_Entry_Index_Specification =>
10244 (1 => True, -- Defining_Identifier (Node1)
10245 2 => False, -- unused
10246 3 => False, -- unused
10247 4 => True, -- Discrete_Subtype_Definition (Node4)
10248 5 => False), -- unused
10250 N_Entry_Call_Statement =>
10251 (1 => False, -- unused
10252 2 => True, -- Name (Node2)
10253 3 => True, -- Parameter_Associations (List3)
10254 4 => False, -- First_Named_Actual (Node4-Sem)
10255 5 => False), -- unused
10257 N_Requeue_Statement =>
10258 (1 => False, -- unused
10259 2 => True, -- Name (Node2)
10260 3 => False, -- unused
10261 4 => False, -- unused
10262 5 => False), -- unused
10264 N_Delay_Until_Statement =>
10265 (1 => False, -- unused
10266 2 => False, -- unused
10267 3 => True, -- Expression (Node3)
10268 4 => False, -- unused
10269 5 => False), -- unused
10271 N_Delay_Relative_Statement =>
10272 (1 => False, -- unused
10273 2 => False, -- unused
10274 3 => True, -- Expression (Node3)
10275 4 => False, -- unused
10276 5 => False), -- unused
10278 N_Selective_Accept =>
10279 (1 => True, -- Select_Alternatives (List1)
10280 2 => False, -- unused
10281 3 => False, -- unused
10282 4 => True, -- Else_Statements (List4)
10283 5 => False), -- unused
10285 N_Accept_Alternative =>
10286 (1 => True, -- Condition (Node1)
10287 2 => True, -- Accept_Statement (Node2)
10288 3 => True, -- Statements (List3)
10289 4 => True, -- Pragmas_Before (List4)
10290 5 => False), -- Accept_Handler_Records (List5-Sem)
10292 N_Delay_Alternative =>
10293 (1 => True, -- Condition (Node1)
10294 2 => True, -- Delay_Statement (Node2)
10295 3 => True, -- Statements (List3)
10296 4 => True, -- Pragmas_Before (List4)
10297 5 => False), -- unused
10299 N_Terminate_Alternative =>
10300 (1 => True, -- Condition (Node1)
10301 2 => False, -- unused
10302 3 => False, -- unused
10303 4 => True, -- Pragmas_Before (List4)
10304 5 => True), -- Pragmas_After (List5)
10306 N_Timed_Entry_Call =>
10307 (1 => True, -- Entry_Call_Alternative (Node1)
10308 2 => False, -- unused
10309 3 => False, -- unused
10310 4 => True, -- Delay_Alternative (Node4)
10311 5 => False), -- unused
10313 N_Entry_Call_Alternative =>
10314 (1 => True, -- Entry_Call_Statement (Node1)
10315 2 => False, -- unused
10316 3 => True, -- Statements (List3)
10317 4 => True, -- Pragmas_Before (List4)
10318 5 => False), -- unused
10320 N_Conditional_Entry_Call =>
10321 (1 => True, -- Entry_Call_Alternative (Node1)
10322 2 => False, -- unused
10323 3 => False, -- unused
10324 4 => True, -- Else_Statements (List4)
10325 5 => False), -- unused
10327 N_Asynchronous_Select =>
10328 (1 => True, -- Triggering_Alternative (Node1)
10329 2 => True, -- Abortable_Part (Node2)
10330 3 => False, -- unused
10331 4 => False, -- unused
10332 5 => False), -- unused
10334 N_Triggering_Alternative =>
10335 (1 => True, -- Triggering_Statement (Node1)
10336 2 => False, -- unused
10337 3 => True, -- Statements (List3)
10338 4 => True, -- Pragmas_Before (List4)
10339 5 => False), -- unused
10341 N_Abortable_Part =>
10342 (1 => False, -- unused
10343 2 => False, -- unused
10344 3 => True, -- Statements (List3)
10345 4 => False, -- unused
10346 5 => False), -- unused
10348 N_Abort_Statement =>
10349 (1 => False, -- unused
10350 2 => True, -- Names (List2)
10351 3 => False, -- unused
10352 4 => False, -- unused
10353 5 => False), -- unused
10355 N_Compilation_Unit =>
10356 (1 => True, -- Context_Items (List1)
10357 2 => True, -- Unit (Node2)
10358 3 => False, -- First_Inlined_Subprogram (Node3-Sem)
10359 4 => False, -- Library_Unit (Node4-Sem)
10360 5 => True), -- Aux_Decls_Node (Node5)
10362 N_Compilation_Unit_Aux =>
10363 (1 => True, -- Actions (List1)
10364 2 => True, -- Declarations (List2)
10365 3 => False, -- unused
10366 4 => True, -- Config_Pragmas (List4)
10367 5 => True), -- Pragmas_After (List5)
10370 (1 => False, -- unused
10371 2 => True, -- Name (Node2)
10372 3 => False, -- unused
10373 4 => False, -- Library_Unit (Node4-Sem)
10374 5 => False), -- Corresponding_Spec (Node5-Sem)
10376 N_Subprogram_Body_Stub =>
10377 (1 => True, -- Specification (Node1)
10378 2 => False, -- unused
10379 3 => False, -- unused
10380 4 => False, -- Library_Unit (Node4-Sem)
10381 5 => False), -- Corresponding_Body (Node5-Sem)
10383 N_Package_Body_Stub =>
10384 (1 => True, -- Defining_Identifier (Node1)
10385 2 => False, -- unused
10386 3 => False, -- unused
10387 4 => False, -- Library_Unit (Node4-Sem)
10388 5 => False), -- Corresponding_Body (Node5-Sem)
10390 N_Task_Body_Stub =>
10391 (1 => True, -- Defining_Identifier (Node1)
10392 2 => False, -- unused
10393 3 => False, -- unused
10394 4 => False, -- Library_Unit (Node4-Sem)
10395 5 => False), -- Corresponding_Body (Node5-Sem)
10397 N_Protected_Body_Stub =>
10398 (1 => True, -- Defining_Identifier (Node1)
10399 2 => False, -- unused
10400 3 => False, -- unused
10401 4 => False, -- Library_Unit (Node4-Sem)
10402 5 => False), -- Corresponding_Body (Node5-Sem)
10405 (1 => True, -- Proper_Body (Node1)
10406 2 => True, -- Name (Node2)
10407 3 => False, -- Corresponding_Stub (Node3-Sem)
10408 4 => False, -- unused
10409 5 => False), -- unused
10411 N_Exception_Declaration =>
10412 (1 => True, -- Defining_Identifier (Node1)
10413 2 => False, -- unused
10414 3 => False, -- Expression (Node3-Sem)
10415 4 => False, -- unused
10416 5 => False), -- unused
10418 N_Handled_Sequence_Of_Statements =>
10419 (1 => True, -- At_End_Proc (Node1)
10420 2 => False, -- First_Real_Statement (Node2-Sem)
10421 3 => True, -- Statements (List3)
10422 4 => True, -- End_Label (Node4)
10423 5 => True), -- Exception_Handlers (List5)
10425 N_Exception_Handler =>
10426 (1 => False, -- Local_Raise_Statements (Elist1)
10427 2 => True, -- Choice_Parameter (Node2)
10428 3 => True, -- Statements (List3)
10429 4 => True, -- Exception_Choices (List4)
10430 5 => False), -- Exception_Label (Node5)
10432 N_Raise_Statement =>
10433 (1 => False, -- unused
10434 2 => True, -- Name (Node2)
10435 3 => True, -- Expression (Node3)
10436 4 => False, -- unused
10437 5 => False), -- unused
10439 N_Generic_Subprogram_Declaration =>
10440 (1 => True, -- Specification (Node1)
10441 2 => True, -- Generic_Formal_Declarations (List2)
10442 3 => False, -- unused
10443 4 => False, -- Parent_Spec (Node4-Sem)
10444 5 => False), -- Corresponding_Body (Node5-Sem)
10446 N_Generic_Package_Declaration =>
10447 (1 => True, -- Specification (Node1)
10448 2 => True, -- Generic_Formal_Declarations (List2)
10449 3 => False, -- Activation_Chain_Entity (Node3-Sem)
10450 4 => False, -- Parent_Spec (Node4-Sem)
10451 5 => False), -- Corresponding_Body (Node5-Sem)
10453 N_Package_Instantiation =>
10454 (1 => True, -- Defining_Unit_Name (Node1)
10455 2 => True, -- Name (Node2)
10456 3 => True, -- Generic_Associations (List3)
10457 4 => False, -- Parent_Spec (Node4-Sem)
10458 5 => False), -- Instance_Spec (Node5-Sem)
10460 N_Procedure_Instantiation =>
10461 (1 => True, -- Defining_Unit_Name (Node1)
10462 2 => True, -- Name (Node2)
10463 3 => True, -- Generic_Associations (List3)
10464 4 => False, -- Parent_Spec (Node4-Sem)
10465 5 => False), -- Instance_Spec (Node5-Sem)
10467 N_Function_Instantiation =>
10468 (1 => True, -- Defining_Unit_Name (Node1)
10469 2 => True, -- Name (Node2)
10470 3 => True, -- Generic_Associations (List3)
10471 4 => False, -- Parent_Spec (Node4-Sem)
10472 5 => False), -- Instance_Spec (Node5-Sem)
10474 N_Generic_Association =>
10475 (1 => True, -- Explicit_Generic_Actual_Parameter (Node1)
10476 2 => True, -- Selector_Name (Node2)
10477 3 => False, -- unused
10478 4 => False, -- unused
10479 5 => False), -- unused
10481 N_Formal_Object_Declaration =>
10482 (1 => True, -- Defining_Identifier (Node1)
10483 2 => False, -- unused
10484 3 => True, -- Access_Definition (Node3)
10485 4 => True, -- Subtype_Mark (Node4)
10486 5 => True), -- Default_Expression (Node5)
10488 N_Formal_Type_Declaration =>
10489 (1 => True, -- Defining_Identifier (Node1)
10490 2 => False, -- unused
10491 3 => True, -- Formal_Type_Definition (Node3)
10492 4 => True, -- Discriminant_Specifications (List4)
10493 5 => False), -- unused
10495 N_Formal_Private_Type_Definition =>
10496 (1 => False, -- unused
10497 2 => False, -- unused
10498 3 => False, -- unused
10499 4 => False, -- unused
10500 5 => False), -- unused
10502 N_Formal_Derived_Type_Definition =>
10503 (1 => False, -- unused
10504 2 => True, -- Interface_List (List2)
10505 3 => False, -- unused
10506 4 => True, -- Subtype_Mark (Node4)
10507 5 => False), -- unused
10509 N_Formal_Discrete_Type_Definition =>
10510 (1 => False, -- unused
10511 2 => False, -- unused
10512 3 => False, -- unused
10513 4 => False, -- unused
10514 5 => False), -- unused
10516 N_Formal_Signed_Integer_Type_Definition =>
10517 (1 => False, -- unused
10518 2 => False, -- unused
10519 3 => False, -- unused
10520 4 => False, -- unused
10521 5 => False), -- unused
10523 N_Formal_Modular_Type_Definition =>
10524 (1 => False, -- unused
10525 2 => False, -- unused
10526 3 => False, -- unused
10527 4 => False, -- unused
10528 5 => False), -- unused
10530 N_Formal_Floating_Point_Definition =>
10531 (1 => False, -- unused
10532 2 => False, -- unused
10533 3 => False, -- unused
10534 4 => False, -- unused
10535 5 => False), -- unused
10537 N_Formal_Ordinary_Fixed_Point_Definition =>
10538 (1 => False, -- unused
10539 2 => False, -- unused
10540 3 => False, -- unused
10541 4 => False, -- unused
10542 5 => False), -- unused
10544 N_Formal_Decimal_Fixed_Point_Definition =>
10545 (1 => False, -- unused
10546 2 => False, -- unused
10547 3 => False, -- unused
10548 4 => False, -- unused
10549 5 => False), -- unused
10551 N_Formal_Concrete_Subprogram_Declaration =>
10552 (1 => True, -- Specification (Node1)
10553 2 => True, -- Default_Name (Node2)
10554 3 => False, -- unused
10555 4 => False, -- unused
10556 5 => False), -- unused
10558 N_Formal_Abstract_Subprogram_Declaration =>
10559 (1 => True, -- Specification (Node1)
10560 2 => True, -- Default_Name (Node2)
10561 3 => False, -- unused
10562 4 => False, -- unused
10563 5 => False), -- unused
10565 N_Formal_Package_Declaration =>
10566 (1 => True, -- Defining_Identifier (Node1)
10567 2 => True, -- Name (Node2)
10568 3 => True, -- Generic_Associations (List3)
10569 4 => False, -- unused
10570 5 => False), -- Instance_Spec (Node5-Sem)
10572 N_Attribute_Definition_Clause =>
10573 (1 => True, -- Chars (Name1)
10574 2 => True, -- Name (Node2)
10575 3 => True, -- Expression (Node3)
10576 4 => False, -- unused
10577 5 => False), -- Next_Rep_Item (Node5-Sem)
10579 N_Enumeration_Representation_Clause =>
10580 (1 => True, -- Identifier (Node1)
10581 2 => False, -- unused
10582 3 => True, -- Array_Aggregate (Node3)
10583 4 => False, -- unused
10584 5 => False), -- Next_Rep_Item (Node5-Sem)
10586 N_Record_Representation_Clause =>
10587 (1 => True, -- Identifier (Node1)
10588 2 => True, -- Mod_Clause (Node2)
10589 3 => True, -- Component_Clauses (List3)
10590 4 => False, -- unused
10591 5 => False), -- Next_Rep_Item (Node5-Sem)
10593 N_Component_Clause =>
10594 (1 => True, -- Component_Name (Node1)
10595 2 => True, -- Position (Node2)
10596 3 => True, -- First_Bit (Node3)
10597 4 => True, -- Last_Bit (Node4)
10598 5 => False), -- unused
10600 N_Code_Statement =>
10601 (1 => False, -- unused
10602 2 => False, -- unused
10603 3 => True, -- Expression (Node3)
10604 4 => False, -- unused
10605 5 => False), -- unused
10607 N_Op_Rotate_Left =>
10608 (1 => True, -- Chars (Name1)
10609 2 => True, -- Left_Opnd (Node2)
10610 3 => True, -- Right_Opnd (Node3)
10611 4 => False, -- Entity (Node4-Sem)
10612 5 => False), -- Etype (Node5-Sem)
10614 N_Op_Rotate_Right =>
10615 (1 => True, -- Chars (Name1)
10616 2 => True, -- Left_Opnd (Node2)
10617 3 => True, -- Right_Opnd (Node3)
10618 4 => False, -- Entity (Node4-Sem)
10619 5 => False), -- Etype (Node5-Sem)
10622 (1 => True, -- Chars (Name1)
10623 2 => True, -- Left_Opnd (Node2)
10624 3 => True, -- Right_Opnd (Node3)
10625 4 => False, -- Entity (Node4-Sem)
10626 5 => False), -- Etype (Node5-Sem)
10628 N_Op_Shift_Right_Arithmetic =>
10629 (1 => True, -- Chars (Name1)
10630 2 => True, -- Left_Opnd (Node2)
10631 3 => True, -- Right_Opnd (Node3)
10632 4 => False, -- Entity (Node4-Sem)
10633 5 => False), -- Etype (Node5-Sem)
10635 N_Op_Shift_Right =>
10636 (1 => True, -- Chars (Name1)
10637 2 => True, -- Left_Opnd (Node2)
10638 3 => True, -- Right_Opnd (Node3)
10639 4 => False, -- Entity (Node4-Sem)
10640 5 => False), -- Etype (Node5-Sem)
10642 N_Delta_Constraint =>
10643 (1 => False, -- unused
10644 2 => False, -- unused
10645 3 => True, -- Delta_Expression (Node3)
10646 4 => True, -- Range_Constraint (Node4)
10647 5 => False), -- unused
10650 (1 => True, -- Identifier (Node1)
10651 2 => False, -- unused
10652 3 => True, -- Expression (Node3)
10653 4 => False, -- unused
10654 5 => False), -- unused
10657 (1 => False, -- unused
10658 2 => False, -- unused
10659 3 => True, -- Expression (Node3)
10660 4 => True, -- Pragmas_Before (List4)
10661 5 => False), -- unused
10663 N_Conditional_Expression =>
10664 (1 => True, -- Expressions (List1)
10665 2 => False, -- Then_Actions (List2-Sem)
10666 3 => False, -- Else_Actions (List3-Sem)
10667 4 => False, -- unused
10668 5 => False), -- Etype (Node5-Sem)
10671 (1 => True, -- Chars (Name1)
10672 2 => True, -- Selector_Name (Node2)
10673 3 => True, -- Prefix (Node3)
10674 4 => False, -- Entity (Node4-Sem)
10675 5 => False), -- Etype (Node5-Sem)
10677 N_Free_Statement =>
10678 (1 => False, -- Storage_Pool (Node1-Sem)
10679 2 => False, -- Procedure_To_Call (Node2-Sem)
10680 3 => True, -- Expression (Node3)
10681 4 => False, -- Actual_Designated_Subtype (Node4-Sem)
10682 5 => False), -- unused
10685 (1 => True, -- Actions (List1)
10686 2 => False, -- Access_Types_To_Process (Elist2-Sem)
10687 3 => False, -- TSS_Elist (Elist3-Sem)
10688 4 => False, -- Entity (Node4-Sem)
10689 5 => False), -- First_Subtype_Link (Node5-Sem)
10691 N_Implicit_Label_Declaration =>
10692 (1 => True, -- Defining_Identifier (Node1)
10693 2 => False, -- Label_Construct (Node2-Sem)
10694 3 => False, -- unused
10695 4 => False, -- unused
10696 5 => False), -- unused
10698 N_Itype_Reference =>
10699 (1 => False, -- Itype (Node1-Sem)
10700 2 => False, -- unused
10701 3 => False, -- unused
10702 4 => False, -- unused
10703 5 => False), -- unused
10705 N_Raise_Constraint_Error =>
10706 (1 => True, -- Condition (Node1)
10707 2 => False, -- unused
10708 3 => True, -- Reason (Uint3)
10709 4 => False, -- unused
10710 5 => False), -- Etype (Node5-Sem)
10712 N_Raise_Program_Error =>
10713 (1 => True, -- Condition (Node1)
10714 2 => False, -- unused
10715 3 => True, -- Reason (Uint3)
10716 4 => False, -- unused
10717 5 => False), -- Etype (Node5-Sem)
10719 N_Raise_Storage_Error =>
10720 (1 => True, -- Condition (Node1)
10721 2 => False, -- unused
10722 3 => True, -- Reason (Uint3)
10723 4 => False, -- unused
10724 5 => False), -- Etype (Node5-Sem)
10726 N_Push_Constraint_Error_Label =>
10727 (1 => False, -- unused
10728 2 => False, -- unused
10729 3 => False, -- unused
10730 4 => False, -- unused
10731 5 => False), -- unused
10733 N_Push_Program_Error_Label =>
10734 (1 => False, -- Exception_Label
10735 2 => False, -- unused
10736 3 => False, -- unused
10737 4 => False, -- unused
10738 5 => False), -- Exception_Label
10740 N_Push_Storage_Error_Label =>
10741 (1 => False, -- Exception_Label
10742 2 => False, -- unused
10743 3 => False, -- unused
10744 4 => False, -- unused
10745 5 => False), -- Exception_Label
10747 N_Pop_Constraint_Error_Label =>
10748 (1 => False, -- unused
10749 2 => False, -- unused
10750 3 => False, -- unused
10751 4 => False, -- unused
10752 5 => False), -- unused
10754 N_Pop_Program_Error_Label =>
10755 (1 => False, -- unused
10756 2 => False, -- unused
10757 3 => False, -- unused
10758 4 => False, -- unused
10759 5 => False), -- unused
10761 N_Pop_Storage_Error_Label =>
10762 (1 => False, -- unused
10763 2 => False, -- unused
10764 3 => False, -- unused
10765 4 => False, -- unused
10766 5 => False), -- unused
10769 (1 => False, -- unused
10770 2 => False, -- unused
10771 3 => True, -- Prefix (Node3)
10772 4 => False, -- unused
10773 5 => False), -- Etype (Node5-Sem)
10775 N_Subprogram_Info =>
10776 (1 => True, -- Identifier (Node1)
10777 2 => False, -- unused
10778 3 => False, -- unused
10779 4 => False, -- unused
10780 5 => False), -- Etype (Node5-Sem)
10782 N_Unchecked_Expression =>
10783 (1 => False, -- unused
10784 2 => False, -- unused
10785 3 => True, -- Expression (Node3)
10786 4 => False, -- unused
10787 5 => False), -- Etype (Node5-Sem)
10789 N_Unchecked_Type_Conversion =>
10790 (1 => False, -- unused
10791 2 => False, -- unused
10792 3 => True, -- Expression (Node3)
10793 4 => True, -- Subtype_Mark (Node4)
10794 5 => False), -- Etype (Node5-Sem)
10796 N_Validate_Unchecked_Conversion =>
10797 (1 => False, -- Source_Type (Node1-Sem)
10798 2 => False, -- Target_Type (Node2-Sem)
10799 3 => False, -- unused
10800 4 => False, -- unused
10801 5 => False), -- unused
10803 -- End of inserted output from makeisf program
10805 -- Entries for Empty, Error and Unused. Even thought these have a Chars
10806 -- field for debugging purposes, they are not really syntactic fields, so
10807 -- we mark all fields as unused.
10810 (1 => False, -- unused
10811 2 => False, -- unused
10812 3 => False, -- unused
10813 4 => False, -- unused
10814 5 => False), -- unused
10817 (1 => False, -- unused
10818 2 => False, -- unused
10819 3 => False, -- unused
10820 4 => False, -- unused
10821 5 => False), -- unused
10823 N_Unused_At_Start =>
10824 (1 => False, -- unused
10825 2 => False, -- unused
10826 3 => False, -- unused
10827 4 => False, -- unused
10828 5 => False), -- unused
10831 (1 => False, -- unused
10832 2 => False, -- unused
10833 3 => False, -- unused
10834 4 => False, -- unused
10835 5 => False)); -- unused
10837 --------------------
10838 -- Inline Pragmas --
10839 --------------------
10841 pragma Inline (ABE_Is_Certain);
10842 pragma Inline (Abort_Present);
10843 pragma Inline (Abortable_Part);
10844 pragma Inline (Abstract_Present);
10845 pragma Inline (Accept_Handler_Records);
10846 pragma Inline (Accept_Statement);
10847 pragma Inline (Access_Definition);
10848 pragma Inline (Access_To_Subprogram_Definition);
10849 pragma Inline (Access_Types_To_Process);
10850 pragma Inline (Actions);
10851 pragma Inline (Activation_Chain_Entity);
10852 pragma Inline (Acts_As_Spec);
10853 pragma Inline (Actual_Designated_Subtype);
10854 pragma Inline (Address_Warning_Posted);
10855 pragma Inline (Aggregate_Bounds);
10856 pragma Inline (Aliased_Present);
10857 pragma Inline (All_Others);
10858 pragma Inline (All_Present);
10859 pragma Inline (Alternatives);
10860 pragma Inline (Ancestor_Part);
10861 pragma Inline (Array_Aggregate);
10862 pragma Inline (Assignment_OK);
10863 pragma Inline (Associated_Node);
10864 pragma Inline (At_End_Proc);
10865 pragma Inline (Attribute_Name);
10866 pragma Inline (Aux_Decls_Node);
10867 pragma Inline (Backwards_OK);
10868 pragma Inline (Bad_Is_Detected);
10869 pragma Inline (Body_To_Inline);
10870 pragma Inline (Body_Required);
10871 pragma Inline (By_Ref);
10872 pragma Inline (Box_Present);
10873 pragma Inline (Char_Literal_Value);
10874 pragma Inline (Chars);
10875 pragma Inline (Check_Address_Alignment);
10876 pragma Inline (Choice_Parameter);
10877 pragma Inline (Choices);
10878 pragma Inline (Coextensions);
10879 pragma Inline (Comes_From_Extended_Return_Statement);
10880 pragma Inline (Compile_Time_Known_Aggregate);
10881 pragma Inline (Component_Associations);
10882 pragma Inline (Component_Clauses);
10883 pragma Inline (Component_Definition);
10884 pragma Inline (Component_Items);
10885 pragma Inline (Component_List);
10886 pragma Inline (Component_Name);
10887 pragma Inline (Condition);
10888 pragma Inline (Condition_Actions);
10889 pragma Inline (Config_Pragmas);
10890 pragma Inline (Constant_Present);
10891 pragma Inline (Constraint);
10892 pragma Inline (Constraints);
10893 pragma Inline (Context_Installed);
10894 pragma Inline (Context_Items);
10895 pragma Inline (Controlling_Argument);
10896 pragma Inline (Conversion_OK);
10897 pragma Inline (Corresponding_Body);
10898 pragma Inline (Corresponding_Formal_Spec);
10899 pragma Inline (Corresponding_Generic_Association);
10900 pragma Inline (Corresponding_Integer_Value);
10901 pragma Inline (Corresponding_Spec);
10902 pragma Inline (Corresponding_Stub);
10903 pragma Inline (Dcheck_Function);
10904 pragma Inline (Debug_Statement);
10905 pragma Inline (Declarations);
10906 pragma Inline (Default_Expression);
10907 pragma Inline (Default_Name);
10908 pragma Inline (Defining_Identifier);
10909 pragma Inline (Defining_Unit_Name);
10910 pragma Inline (Delay_Alternative);
10911 pragma Inline (Delay_Statement);
10912 pragma Inline (Delta_Expression);
10913 pragma Inline (Digits_Expression);
10914 pragma Inline (Discr_Check_Funcs_Built);
10915 pragma Inline (Discrete_Choices);
10916 pragma Inline (Discrete_Range);
10917 pragma Inline (Discrete_Subtype_Definition);
10918 pragma Inline (Discrete_Subtype_Definitions);
10919 pragma Inline (Discriminant_Specifications);
10920 pragma Inline (Discriminant_Type);
10921 pragma Inline (Do_Accessibility_Check);
10922 pragma Inline (Do_Discriminant_Check);
10923 pragma Inline (Do_Length_Check);
10924 pragma Inline (Do_Division_Check);
10925 pragma Inline (Do_Overflow_Check);
10926 pragma Inline (Do_Range_Check);
10927 pragma Inline (Do_Storage_Check);
10928 pragma Inline (Do_Tag_Check);
10929 pragma Inline (Elaborate_Present);
10930 pragma Inline (Elaborate_All_Desirable);
10931 pragma Inline (Elaborate_All_Present);
10932 pragma Inline (Elaborate_Desirable);
10933 pragma Inline (Elaboration_Boolean);
10934 pragma Inline (Else_Actions);
10935 pragma Inline (Else_Statements);
10936 pragma Inline (Elsif_Parts);
10937 pragma Inline (Enclosing_Variant);
10938 pragma Inline (End_Label);
10939 pragma Inline (End_Span);
10940 pragma Inline (Entity);
10941 pragma Inline (Entity_Or_Associated_Node);
10942 pragma Inline (Entry_Body_Formal_Part);
10943 pragma Inline (Entry_Call_Alternative);
10944 pragma Inline (Entry_Call_Statement);
10945 pragma Inline (Entry_Direct_Name);
10946 pragma Inline (Entry_Index);
10947 pragma Inline (Entry_Index_Specification);
10948 pragma Inline (Etype);
10949 pragma Inline (Exception_Choices);
10950 pragma Inline (Exception_Handlers);
10951 pragma Inline (Exception_Junk);
10952 pragma Inline (Exception_Label);
10953 pragma Inline (Expansion_Delayed);
10954 pragma Inline (Explicit_Actual_Parameter);
10955 pragma Inline (Explicit_Generic_Actual_Parameter);
10956 pragma Inline (Expression);
10957 pragma Inline (Expressions);
10958 pragma Inline (First_Bit);
10959 pragma Inline (First_Inlined_Subprogram);
10960 pragma Inline (First_Name);
10961 pragma Inline (First_Named_Actual);
10962 pragma Inline (First_Real_Statement);
10963 pragma Inline (First_Subtype_Link);
10964 pragma Inline (Float_Truncate);
10965 pragma Inline (Formal_Type_Definition);
10966 pragma Inline (Forwards_OK);
10967 pragma Inline (From_At_End);
10968 pragma Inline (From_At_Mod);
10969 pragma Inline (From_Default);
10970 pragma Inline (Generic_Associations);
10971 pragma Inline (Generic_Formal_Declarations);
10972 pragma Inline (Generic_Parent);
10973 pragma Inline (Generic_Parent_Type);
10974 pragma Inline (Handled_Statement_Sequence);
10975 pragma Inline (Handler_List_Entry);
10976 pragma Inline (Has_Created_Identifier);
10977 pragma Inline (Has_Dynamic_Length_Check);
10978 pragma Inline (Has_Dynamic_Range_Check);
10979 pragma Inline (Has_Init_Expression);
10980 pragma Inline (Has_Local_Raise);
10981 pragma Inline (Has_Self_Reference);
10982 pragma Inline (Has_No_Elaboration_Code);
10983 pragma Inline (Has_Priority_Pragma);
10984 pragma Inline (Has_Private_View);
10985 pragma Inline (Has_Relative_Deadline_Pragma);
10986 pragma Inline (Has_Storage_Size_Pragma);
10987 pragma Inline (Has_Task_Info_Pragma);
10988 pragma Inline (Has_Task_Name_Pragma);
10989 pragma Inline (Has_Wide_Character);
10990 pragma Inline (Hidden_By_Use_Clause);
10991 pragma Inline (High_Bound);
10992 pragma Inline (Identifier);
10993 pragma Inline (Implicit_With);
10994 pragma Inline (Interface_List);
10995 pragma Inline (Interface_Present);
10996 pragma Inline (Includes_Infinities);
10997 pragma Inline (In_Present);
10998 pragma Inline (Instance_Spec);
10999 pragma Inline (Intval);
11000 pragma Inline (Is_Asynchronous_Call_Block);
11001 pragma Inline (Is_Component_Left_Opnd);
11002 pragma Inline (Is_Component_Right_Opnd);
11003 pragma Inline (Is_Controlling_Actual);
11004 pragma Inline (Is_Dynamic_Coextension);
11005 pragma Inline (Is_Entry_Barrier_Function);
11006 pragma Inline (Is_Expanded_Build_In_Place_Call);
11007 pragma Inline (Is_Folded_In_Parser);
11008 pragma Inline (Is_In_Discriminant_Check);
11009 pragma Inline (Is_Machine_Number);
11010 pragma Inline (Is_Null_Loop);
11011 pragma Inline (Is_Overloaded);
11012 pragma Inline (Is_Power_Of_2_For_Shift);
11013 pragma Inline (Is_Protected_Subprogram_Body);
11014 pragma Inline (Is_Static_Coextension);
11015 pragma Inline (Is_Static_Expression);
11016 pragma Inline (Is_Subprogram_Descriptor);
11017 pragma Inline (Is_Task_Allocation_Block);
11018 pragma Inline (Is_Task_Master);
11019 pragma Inline (Iteration_Scheme);
11020 pragma Inline (Itype);
11021 pragma Inline (Kill_Range_Check);
11022 pragma Inline (Last_Bit);
11023 pragma Inline (Last_Name);
11024 pragma Inline (Library_Unit);
11025 pragma Inline (Label_Construct);
11026 pragma Inline (Left_Opnd);
11027 pragma Inline (Limited_View_Installed);
11028 pragma Inline (Limited_Present);
11029 pragma Inline (Literals);
11030 pragma Inline (Local_Raise_Not_OK);
11031 pragma Inline (Local_Raise_Statements);
11032 pragma Inline (Loop_Actions);
11033 pragma Inline (Loop_Parameter_Specification);
11034 pragma Inline (Low_Bound);
11035 pragma Inline (Mod_Clause);
11036 pragma Inline (More_Ids);
11037 pragma Inline (Must_Be_Byte_Aligned);
11038 pragma Inline (Must_Not_Freeze);
11039 pragma Inline (Must_Not_Override);
11040 pragma Inline (Must_Override);
11041 pragma Inline (Name);
11042 pragma Inline (Names);
11043 pragma Inline (Next_Entity);
11044 pragma Inline (Next_Named_Actual);
11045 pragma Inline (Next_Pragma);
11046 pragma Inline (Next_Rep_Item);
11047 pragma Inline (Next_Use_Clause);
11048 pragma Inline (No_Ctrl_Actions);
11049 pragma Inline (No_Elaboration_Check);
11050 pragma Inline (No_Entities_Ref_In_Spec);
11051 pragma Inline (No_Initialization);
11052 pragma Inline (No_Truncation);
11053 pragma Inline (Null_Present);
11054 pragma Inline (Null_Exclusion_Present);
11055 pragma Inline (Null_Record_Present);
11056 pragma Inline (Object_Definition);
11057 pragma Inline (Original_Discriminant);
11058 pragma Inline (Original_Entity);
11059 pragma Inline (Others_Discrete_Choices);
11060 pragma Inline (Out_Present);
11061 pragma Inline (Parameter_Associations);
11062 pragma Inline (Parameter_Specifications);
11063 pragma Inline (Parameter_List_Truncated);
11064 pragma Inline (Parameter_Type);
11065 pragma Inline (Parent_Spec);
11066 pragma Inline (PPC_Enabled);
11067 pragma Inline (Position);
11068 pragma Inline (Pragma_Argument_Associations);
11069 pragma Inline (Pragma_Identifier);
11070 pragma Inline (Pragmas_After);
11071 pragma Inline (Pragmas_Before);
11072 pragma Inline (Prefix);
11073 pragma Inline (Present_Expr);
11074 pragma Inline (Prev_Ids);
11075 pragma Inline (Print_In_Hex);
11076 pragma Inline (Private_Declarations);
11077 pragma Inline (Private_Present);
11078 pragma Inline (Procedure_To_Call);
11079 pragma Inline (Proper_Body);
11080 pragma Inline (Protected_Definition);
11081 pragma Inline (Protected_Present);
11082 pragma Inline (Raises_Constraint_Error);
11083 pragma Inline (Range_Constraint);
11084 pragma Inline (Range_Expression);
11085 pragma Inline (Real_Range_Specification);
11086 pragma Inline (Realval);
11087 pragma Inline (Reason);
11088 pragma Inline (Record_Extension_Part);
11089 pragma Inline (Redundant_Use);
11090 pragma Inline (Renaming_Exception);
11091 pragma Inline (Result_Definition);
11092 pragma Inline (Return_Object_Declarations);
11093 pragma Inline (Return_Statement_Entity);
11094 pragma Inline (Reverse_Present);
11095 pragma Inline (Right_Opnd);
11096 pragma Inline (Rounded_Result);
11097 pragma Inline (Scope);
11098 pragma Inline (Select_Alternatives);
11099 pragma Inline (Selector_Name);
11100 pragma Inline (Selector_Names);
11101 pragma Inline (Shift_Count_OK);
11102 pragma Inline (Source_Type);
11103 pragma Inline (Specification);
11104 pragma Inline (Statements);
11105 pragma Inline (Static_Processing_OK);
11106 pragma Inline (Storage_Pool);
11107 pragma Inline (Strval);
11108 pragma Inline (Subtype_Indication);
11109 pragma Inline (Subtype_Mark);
11110 pragma Inline (Subtype_Marks);
11111 pragma Inline (Synchronized_Present);
11112 pragma Inline (Tagged_Present);
11113 pragma Inline (Target_Type);
11114 pragma Inline (Task_Definition);
11115 pragma Inline (Task_Present);
11116 pragma Inline (Then_Actions);
11117 pragma Inline (Then_Statements);
11118 pragma Inline (Triggering_Alternative);
11119 pragma Inline (Triggering_Statement);
11120 pragma Inline (Treat_Fixed_As_Integer);
11121 pragma Inline (TSS_Elist);
11122 pragma Inline (Type_Definition);
11123 pragma Inline (Unit);
11124 pragma Inline (Unknown_Discriminants_Present);
11125 pragma Inline (Unreferenced_In_Spec);
11126 pragma Inline (Variant_Part);
11127 pragma Inline (Variants);
11128 pragma Inline (Visible_Declarations);
11129 pragma Inline (Was_Originally_Stub);
11130 pragma Inline (Zero_Cost_Handling);
11132 pragma Inline (Set_ABE_Is_Certain);
11133 pragma Inline (Set_Abort_Present);
11134 pragma Inline (Set_Abortable_Part);
11135 pragma Inline (Set_Abstract_Present);
11136 pragma Inline (Set_Accept_Handler_Records);
11137 pragma Inline (Set_Accept_Statement);
11138 pragma Inline (Set_Access_Definition);
11139 pragma Inline (Set_Access_To_Subprogram_Definition);
11140 pragma Inline (Set_Access_Types_To_Process);
11141 pragma Inline (Set_Actions);
11142 pragma Inline (Set_Activation_Chain_Entity);
11143 pragma Inline (Set_Acts_As_Spec);
11144 pragma Inline (Set_Actual_Designated_Subtype);
11145 pragma Inline (Set_Address_Warning_Posted);
11146 pragma Inline (Set_Aggregate_Bounds);
11147 pragma Inline (Set_Aliased_Present);
11148 pragma Inline (Set_All_Others);
11149 pragma Inline (Set_All_Present);
11150 pragma Inline (Set_Alternatives);
11151 pragma Inline (Set_Ancestor_Part);
11152 pragma Inline (Set_Array_Aggregate);
11153 pragma Inline (Set_Assignment_OK);
11154 pragma Inline (Set_Associated_Node);
11155 pragma Inline (Set_At_End_Proc);
11156 pragma Inline (Set_Attribute_Name);
11157 pragma Inline (Set_Aux_Decls_Node);
11158 pragma Inline (Set_Backwards_OK);
11159 pragma Inline (Set_Bad_Is_Detected);
11160 pragma Inline (Set_Body_To_Inline);
11161 pragma Inline (Set_Body_Required);
11162 pragma Inline (Set_By_Ref);
11163 pragma Inline (Set_Box_Present);
11164 pragma Inline (Set_Char_Literal_Value);
11165 pragma Inline (Set_Chars);
11166 pragma Inline (Set_Check_Address_Alignment);
11167 pragma Inline (Set_Choice_Parameter);
11168 pragma Inline (Set_Choices);
11169 pragma Inline (Set_Coextensions);
11170 pragma Inline (Set_Comes_From_Extended_Return_Statement);
11171 pragma Inline (Set_Compile_Time_Known_Aggregate);
11172 pragma Inline (Set_Component_Associations);
11173 pragma Inline (Set_Component_Clauses);
11174 pragma Inline (Set_Component_Definition);
11175 pragma Inline (Set_Component_Items);
11176 pragma Inline (Set_Component_List);
11177 pragma Inline (Set_Component_Name);
11178 pragma Inline (Set_Condition);
11179 pragma Inline (Set_Condition_Actions);
11180 pragma Inline (Set_Config_Pragmas);
11181 pragma Inline (Set_Constant_Present);
11182 pragma Inline (Set_Constraint);
11183 pragma Inline (Set_Constraints);
11184 pragma Inline (Set_Context_Installed);
11185 pragma Inline (Set_Context_Items);
11186 pragma Inline (Set_Controlling_Argument);
11187 pragma Inline (Set_Conversion_OK);
11188 pragma Inline (Set_Corresponding_Body);
11189 pragma Inline (Set_Corresponding_Formal_Spec);
11190 pragma Inline (Set_Corresponding_Generic_Association);
11191 pragma Inline (Set_Corresponding_Integer_Value);
11192 pragma Inline (Set_Corresponding_Spec);
11193 pragma Inline (Set_Corresponding_Stub);
11194 pragma Inline (Set_Dcheck_Function);
11195 pragma Inline (Set_Debug_Statement);
11196 pragma Inline (Set_Declarations);
11197 pragma Inline (Set_Default_Expression);
11198 pragma Inline (Set_Default_Name);
11199 pragma Inline (Set_Defining_Identifier);
11200 pragma Inline (Set_Defining_Unit_Name);
11201 pragma Inline (Set_Delay_Alternative);
11202 pragma Inline (Set_Delay_Statement);
11203 pragma Inline (Set_Delta_Expression);
11204 pragma Inline (Set_Digits_Expression);
11205 pragma Inline (Set_Discr_Check_Funcs_Built);
11206 pragma Inline (Set_Discrete_Choices);
11207 pragma Inline (Set_Discrete_Range);
11208 pragma Inline (Set_Discrete_Subtype_Definition);
11209 pragma Inline (Set_Discrete_Subtype_Definitions);
11210 pragma Inline (Set_Discriminant_Specifications);
11211 pragma Inline (Set_Discriminant_Type);
11212 pragma Inline (Set_Do_Accessibility_Check);
11213 pragma Inline (Set_Do_Discriminant_Check);
11214 pragma Inline (Set_Do_Length_Check);
11215 pragma Inline (Set_Do_Division_Check);
11216 pragma Inline (Set_Do_Overflow_Check);
11217 pragma Inline (Set_Do_Range_Check);
11218 pragma Inline (Set_Do_Storage_Check);
11219 pragma Inline (Set_Do_Tag_Check);
11220 pragma Inline (Set_Elaborate_Present);
11221 pragma Inline (Set_Elaborate_All_Desirable);
11222 pragma Inline (Set_Elaborate_All_Present);
11223 pragma Inline (Set_Elaborate_Desirable);
11224 pragma Inline (Set_Elaboration_Boolean);
11225 pragma Inline (Set_Else_Actions);
11226 pragma Inline (Set_Else_Statements);
11227 pragma Inline (Set_Elsif_Parts);
11228 pragma Inline (Set_Enclosing_Variant);
11229 pragma Inline (Set_End_Label);
11230 pragma Inline (Set_End_Span);
11231 pragma Inline (Set_Entity);
11232 pragma Inline (Set_Entry_Body_Formal_Part);
11233 pragma Inline (Set_Entry_Call_Alternative);
11234 pragma Inline (Set_Entry_Call_Statement);
11235 pragma Inline (Set_Entry_Direct_Name);
11236 pragma Inline (Set_Entry_Index);
11237 pragma Inline (Set_Entry_Index_Specification);
11238 pragma Inline (Set_Etype);
11239 pragma Inline (Set_Exception_Choices);
11240 pragma Inline (Set_Exception_Handlers);
11241 pragma Inline (Set_Exception_Junk);
11242 pragma Inline (Set_Exception_Label);
11243 pragma Inline (Set_Expansion_Delayed);
11244 pragma Inline (Set_Explicit_Actual_Parameter);
11245 pragma Inline (Set_Explicit_Generic_Actual_Parameter);
11246 pragma Inline (Set_Expression);
11247 pragma Inline (Set_Expressions);
11248 pragma Inline (Set_First_Bit);
11249 pragma Inline (Set_First_Inlined_Subprogram);
11250 pragma Inline (Set_First_Name);
11251 pragma Inline (Set_First_Named_Actual);
11252 pragma Inline (Set_First_Real_Statement);
11253 pragma Inline (Set_First_Subtype_Link);
11254 pragma Inline (Set_Float_Truncate);
11255 pragma Inline (Set_Formal_Type_Definition);
11256 pragma Inline (Set_Forwards_OK);
11257 pragma Inline (Set_From_At_End);
11258 pragma Inline (Set_From_At_Mod);
11259 pragma Inline (Set_From_Default);
11260 pragma Inline (Set_Generic_Associations);
11261 pragma Inline (Set_Generic_Formal_Declarations);
11262 pragma Inline (Set_Generic_Parent);
11263 pragma Inline (Set_Generic_Parent_Type);
11264 pragma Inline (Set_Handled_Statement_Sequence);
11265 pragma Inline (Set_Handler_List_Entry);
11266 pragma Inline (Set_Has_Created_Identifier);
11267 pragma Inline (Set_Has_Dynamic_Length_Check);
11268 pragma Inline (Set_Has_Init_Expression);
11269 pragma Inline (Set_Has_Local_Raise);
11270 pragma Inline (Set_Has_Dynamic_Range_Check);
11271 pragma Inline (Set_Has_No_Elaboration_Code);
11272 pragma Inline (Set_Has_Priority_Pragma);
11273 pragma Inline (Set_Has_Private_View);
11274 pragma Inline (Set_Has_Relative_Deadline_Pragma);
11275 pragma Inline (Set_Has_Storage_Size_Pragma);
11276 pragma Inline (Set_Has_Task_Info_Pragma);
11277 pragma Inline (Set_Has_Task_Name_Pragma);
11278 pragma Inline (Set_Has_Wide_Character);
11279 pragma Inline (Set_Hidden_By_Use_Clause);
11280 pragma Inline (Set_High_Bound);
11281 pragma Inline (Set_Identifier);
11282 pragma Inline (Set_Implicit_With);
11283 pragma Inline (Set_Includes_Infinities);
11284 pragma Inline (Set_Interface_List);
11285 pragma Inline (Set_Interface_Present);
11286 pragma Inline (Set_In_Present);
11287 pragma Inline (Set_Instance_Spec);
11288 pragma Inline (Set_Intval);
11289 pragma Inline (Set_Is_Asynchronous_Call_Block);
11290 pragma Inline (Set_Is_Component_Left_Opnd);
11291 pragma Inline (Set_Is_Component_Right_Opnd);
11292 pragma Inline (Set_Is_Controlling_Actual);
11293 pragma Inline (Set_Is_Dynamic_Coextension);
11294 pragma Inline (Set_Is_Entry_Barrier_Function);
11295 pragma Inline (Set_Is_Expanded_Build_In_Place_Call);
11296 pragma Inline (Set_Is_Folded_In_Parser);
11297 pragma Inline (Set_Is_In_Discriminant_Check);
11298 pragma Inline (Set_Is_Machine_Number);
11299 pragma Inline (Set_Is_Null_Loop);
11300 pragma Inline (Set_Is_Overloaded);
11301 pragma Inline (Set_Is_Power_Of_2_For_Shift);
11302 pragma Inline (Set_Is_Protected_Subprogram_Body);
11303 pragma Inline (Set_Has_Self_Reference);
11304 pragma Inline (Set_Is_Static_Coextension);
11305 pragma Inline (Set_Is_Static_Expression);
11306 pragma Inline (Set_Is_Subprogram_Descriptor);
11307 pragma Inline (Set_Is_Task_Allocation_Block);
11308 pragma Inline (Set_Is_Task_Master);
11309 pragma Inline (Set_Iteration_Scheme);
11310 pragma Inline (Set_Itype);
11311 pragma Inline (Set_Kill_Range_Check);
11312 pragma Inline (Set_Last_Bit);
11313 pragma Inline (Set_Last_Name);
11314 pragma Inline (Set_Library_Unit);
11315 pragma Inline (Set_Label_Construct);
11316 pragma Inline (Set_Left_Opnd);
11317 pragma Inline (Set_Limited_View_Installed);
11318 pragma Inline (Set_Limited_Present);
11319 pragma Inline (Set_Literals);
11320 pragma Inline (Set_Local_Raise_Not_OK);
11321 pragma Inline (Set_Local_Raise_Statements);
11322 pragma Inline (Set_Loop_Actions);
11323 pragma Inline (Set_Loop_Parameter_Specification);
11324 pragma Inline (Set_Low_Bound);
11325 pragma Inline (Set_Mod_Clause);
11326 pragma Inline (Set_More_Ids);
11327 pragma Inline (Set_Must_Be_Byte_Aligned);
11328 pragma Inline (Set_Must_Not_Freeze);
11329 pragma Inline (Set_Must_Not_Override);
11330 pragma Inline (Set_Must_Override);
11331 pragma Inline (Set_Name);
11332 pragma Inline (Set_Names);
11333 pragma Inline (Set_Next_Entity);
11334 pragma Inline (Set_Next_Named_Actual);
11335 pragma Inline (Set_Next_Pragma);
11336 pragma Inline (Set_Next_Rep_Item);
11337 pragma Inline (Set_Next_Use_Clause);
11338 pragma Inline (Set_No_Ctrl_Actions);
11339 pragma Inline (Set_No_Elaboration_Check);
11340 pragma Inline (Set_No_Entities_Ref_In_Spec);
11341 pragma Inline (Set_No_Initialization);
11342 pragma Inline (Set_No_Truncation);
11343 pragma Inline (Set_Null_Present);
11344 pragma Inline (Set_Null_Exclusion_Present);
11345 pragma Inline (Set_Null_Record_Present);
11346 pragma Inline (Set_Object_Definition);
11347 pragma Inline (Set_Original_Discriminant);
11348 pragma Inline (Set_Original_Entity);
11349 pragma Inline (Set_Others_Discrete_Choices);
11350 pragma Inline (Set_Out_Present);
11351 pragma Inline (Set_Parameter_Associations);
11352 pragma Inline (Set_Parameter_Specifications);
11353 pragma Inline (Set_Parameter_List_Truncated);
11354 pragma Inline (Set_Parameter_Type);
11355 pragma Inline (Set_Parent_Spec);
11356 pragma Inline (Set_PPC_Enabled);
11357 pragma Inline (Set_Position);
11358 pragma Inline (Set_Pragma_Argument_Associations);
11359 pragma Inline (Set_Pragma_Identifier);
11360 pragma Inline (Set_Pragmas_After);
11361 pragma Inline (Set_Pragmas_Before);
11362 pragma Inline (Set_Prefix);
11363 pragma Inline (Set_Present_Expr);
11364 pragma Inline (Set_Prev_Ids);
11365 pragma Inline (Set_Print_In_Hex);
11366 pragma Inline (Set_Private_Declarations);
11367 pragma Inline (Set_Private_Present);
11368 pragma Inline (Set_Procedure_To_Call);
11369 pragma Inline (Set_Proper_Body);
11370 pragma Inline (Set_Protected_Definition);
11371 pragma Inline (Set_Protected_Present);
11372 pragma Inline (Set_Raises_Constraint_Error);
11373 pragma Inline (Set_Range_Constraint);
11374 pragma Inline (Set_Range_Expression);
11375 pragma Inline (Set_Real_Range_Specification);
11376 pragma Inline (Set_Realval);
11377 pragma Inline (Set_Reason);
11378 pragma Inline (Set_Record_Extension_Part);
11379 pragma Inline (Set_Redundant_Use);
11380 pragma Inline (Set_Renaming_Exception);
11381 pragma Inline (Set_Result_Definition);
11382 pragma Inline (Set_Return_Object_Declarations);
11383 pragma Inline (Set_Reverse_Present);
11384 pragma Inline (Set_Right_Opnd);
11385 pragma Inline (Set_Rounded_Result);
11386 pragma Inline (Set_Scope);
11387 pragma Inline (Set_Select_Alternatives);
11388 pragma Inline (Set_Selector_Name);
11389 pragma Inline (Set_Selector_Names);
11390 pragma Inline (Set_Shift_Count_OK);
11391 pragma Inline (Set_Source_Type);
11392 pragma Inline (Set_Specification);
11393 pragma Inline (Set_Statements);
11394 pragma Inline (Set_Static_Processing_OK);
11395 pragma Inline (Set_Storage_Pool);
11396 pragma Inline (Set_Strval);
11397 pragma Inline (Set_Subtype_Indication);
11398 pragma Inline (Set_Subtype_Mark);
11399 pragma Inline (Set_Subtype_Marks);
11400 pragma Inline (Set_Synchronized_Present);
11401 pragma Inline (Set_Tagged_Present);
11402 pragma Inline (Set_Target_Type);
11403 pragma Inline (Set_Task_Definition);
11404 pragma Inline (Set_Task_Present);
11405 pragma Inline (Set_Then_Actions);
11406 pragma Inline (Set_Then_Statements);
11407 pragma Inline (Set_Triggering_Alternative);
11408 pragma Inline (Set_Triggering_Statement);
11409 pragma Inline (Set_Treat_Fixed_As_Integer);
11410 pragma Inline (Set_TSS_Elist);
11411 pragma Inline (Set_Type_Definition);
11412 pragma Inline (Set_Unit);
11413 pragma Inline (Set_Unknown_Discriminants_Present);
11414 pragma Inline (Set_Unreferenced_In_Spec);
11415 pragma Inline (Set_Variant_Part);
11416 pragma Inline (Set_Variants);
11417 pragma Inline (Set_Visible_Declarations);
11418 pragma Inline (Set_Was_Originally_Stub);
11419 pragma Inline (Set_Zero_Cost_Handling);
11421 N_Simple_Return_Statement : constant Node_Kind := N_Return_Statement;
11422 -- Rename N_Return_Statement to be N_Simple_Return_Statement. Clients
11423 -- should refer to N_Simple_Return_Statement.
OSDN Git Service
