1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1998-2006, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 2, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING. If not, write --
19 -- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, --
20 -- Boston, MA 02110-1301, USA. --
22 -- GNAT was originally developed by the GNAT team at New York University. --
23 -- Extensive contributions were provided by Ada Core Technologies Inc. --
25 ------------------------------------------------------------------------------
27 -- This package contains for collecting and outputting cross-reference
30 with Einfo; use Einfo;
34 -------------------------------------------------------
35 -- Format of Cross-Reference Information in ALI File --
36 -------------------------------------------------------
38 -- Cross-reference sections follow the dependency section (D lines) in
39 -- an ALI file, so that they need not be read by gnatbind, gnatmake etc.
41 -- A cross reference section has a header of the form
43 -- X dependency-number filename
45 -- This header precedes xref information (entities/references from
46 -- the unit, identified by dependency number and file name. The
47 -- dependency number is the index into the generated D lines and
48 -- is ones origin (i.e. 2 = reference to second generated D line).
50 -- Note that the filename here will reflect the original name if
51 -- a Source_Reference pragma was encountered (since all line number
52 -- references will be with respect to the original file).
54 -- The lines following the header look like
56 -- line type col level entity renameref instref typeref overref ref ref
58 -- line is the line number of the referenced entity. The name of
59 -- the entity starts in column col. Columns are numbered from one,
60 -- and if horizontal tab characters are present, the column number
61 -- is computed assuming standard 1,9,17,.. tab stops. For example,
62 -- if the entity is the first token on the line, and is preceded
63 -- by space-HT-space, then the column would be column 10.
65 -- type is a single letter identifying the type of the entity.
66 -- See next section (Cross-Reference Entity Identifiers) for a
67 -- full list of the characters used).
69 -- col is the column number of the referenced entity
71 -- level is a single character that separates the col and
72 -- entity fields. It is an asterisk for a top level library
73 -- entity that is publicly visible, as well for an entity declared
74 -- in the visible part of a generic package, and space otherwise.
76 -- entity is the name of the referenced entity, with casing in
77 -- the canical casing for the source file where it is defined.
79 -- renameref provides information on renaming. If the entity is
80 -- a package, object or overloadable entity which is declared by
81 -- a renaming declaration, and the renaming refers to an entity
82 -- with a simple identifier or expanded name, then renameref has
87 -- Here line:col give the reference to the identifier that
88 -- appears in the renaming declaration. Note that we never need
89 -- a file entry, since this identifier is always in the current
90 -- file in which the entity is declared. Currently, renameref
91 -- appears only for the simple renaming case. If the renaming
92 -- reference is a complex expressions, then renameref is omitted.
93 -- Here line/col give line/column as defined above.
95 -- instref is only present for package and subprogram instances.
96 -- The information in instref is the location of the point of
97 -- declaration of the generic parent unit. This part has the form:
101 -- without column information, on the reasonable assumption that
102 -- there is only one unit per line (the same assumption is made
103 -- in references to entities that are declared within instances,
106 -- typeref is the reference for a related type. This part is
107 -- optional. It is present for the following cases:
109 -- derived types (points to the parent type) LR=<>
110 -- access types (points to designated type) LR=()
111 -- array types (points to component type) LR=()
112 -- subtypes (points to ancestor type) LR={}
113 -- functions (points to result type) LR={}
114 -- enumeration literals (points to enum type) LR={}
115 -- objects and components (points to type) LR={}
117 -- For a type that implements multiple interfaces, there is an
118 -- entry of the form LR=<> for each of the interfaces appearing
119 -- in the type declaration.
121 -- In the above list LR shows the brackets used in the output,
122 -- which has one of the two following forms:
124 -- L file | line type col R user entity
125 -- L name-in-lower-case R standard entity
127 -- For the form for a user entity, file is the dependency number
128 -- of the file containing the declaration of the related type.
129 -- This number and the following vertical bar are omitted if the
130 -- relevant type is defined in the same file as the current entity.
131 -- The line, type, col are defined as previously described, and
132 -- specify the location of the relevant type declaration in the
133 -- referenced file. For the standard entity form, the name between
134 -- the brackets is the normal name of the entity in lower case.
136 -- overref is present for overriding operations (procedures and
137 -- functions), and provides information on the operation that it
138 -- overrides. This information has the format:
140 -- '<' file | line 'o' col '>'
142 -- file is the dependency number of the file containing the
143 -- declaration of the overridden operation. It and the following
144 -- vertical bar are omitted if the file is the same as that of
145 -- the overriding operation.
147 -- There may be zero or more ref entries on each line
149 -- file | line type col [...]
151 -- file is the dependency number of the file with the reference.
152 -- It and the following vertical bar are omitted if the file is
153 -- the same as the previous ref, and the refs for the current
154 -- file are first (and do not need a bar).
156 -- line is the line number of the reference
158 -- col is the column number of the reference, as defined above
162 -- c = completion of private or incomplete type
163 -- d = discriminant of type
166 -- i = implicit reference
167 -- k = implicit reference to parent unit in child unit
168 -- l = label on END line
170 -- p = primitive operation
171 -- P = overriding primitive operation
175 -- x = type extension
176 -- z = generic formal parameter
177 -- > = subprogram IN parameter
178 -- = = subprogram IN OUT parameter
179 -- < = subprogram OUT parameter
180 -- > = subprogram ACCESS parameter
182 -- b is used for spec entities that are repeated in a body,
183 -- including the unit (subprogram, package, task, protected
184 -- body, protected entry) name itself, and in the case of a
185 -- subprogram, the formals. This letter is also used for the
186 -- occurrence of entry names in accept statements. Such entities
187 -- are not considered to be definitions for cross-referencing
188 -- purposes, but rather are considered to be references to the
189 -- corresponding spec entities, marked with this special type.
191 -- c is similar to b but is used to mark the completion of a
192 -- private or incomplete type. As with b, the completion is not
193 -- regarded as a separate definition, but rather a reference to
194 -- the initial declaration, marked with this special type.
196 -- d is used to identify a discriminant of a type. If this is
197 -- an incomplete or private type with discriminants, the entry
198 -- denotes the occurrence of the discriminant in the partial view
199 -- which is also the point of definition of the discriminant.
200 -- The occurrence of the same discriminant in the full view is
201 -- a regular reference to it.
203 -- e is used to identify the end of a construct in the following
206 -- Block Statement end [block_IDENTIFIER];
207 -- Loop Statement end loop [loop_IDENTIFIER];
208 -- Package Specification end [[PARENT_UNIT_NAME .] IDENTIFIER];
209 -- Task Definition end [task_IDENTIFIER];
210 -- Protected Definition end [protected_IDENTIFIER];
211 -- Record Definition end record;
212 -- Enumeration Definition );
214 -- Note that 'e' entries are special in that they appear even
215 -- in referencing units (normally xref entries appear only
216 -- for references in the extended main source unit (see Lib) to
217 -- which the ali applies. But 'e' entries are really structural
218 -- and simply indicate where packages end. This information can
219 -- be used to reconstruct scope information for any entities
220 -- referenced from within the package. The line/column values
221 -- for these entries point to the semicolon ending the construct.
223 -- i is used to identify a reference to the entity in a generic
224 -- actual or in a default in a call. The node that denotes the
225 -- entity does not come from source, but it has the Sloc of the
226 -- source node that generates the implicit reference, and it is
227 -- useful to record this one.
229 -- k is used to denote a reference to the parent unit, in the
230 -- cross-reference line for a child unit.
232 -- l is used to identify the occurrence in the source of the
233 -- name on an end line. This is just a syntactic reference
234 -- which can be ignored for semantic purposes (such as call
235 -- graph construction). Again, in the case of an accept there
236 -- can be multiple l lines.
238 -- p is used to mark a primitive operation of the given entity.
239 -- For example, if we have a type Tx, and a primitive operation
240 -- Pq of this type, then an entry in the list of references to
241 -- Tx will point to the declaration of Pq. Note that this entry
242 -- type is unusual because it an implicit rather than explicit,
243 -- and the name of the refrerence does not match the name of the
244 -- entity for which a reference is generated. These entries are
245 -- generated only for entities declared in the extended main
246 -- source unit (main unit itself, its separate spec (if any).
247 -- and all subunits (considered recursively).
249 -- If the primitive operation overrides an inherited primitive
250 -- operation of the parent type, the letter 'P' is used in the
251 -- corresponding entry.
253 -- t is similar to e. It identifies the end of a corresponding
254 -- body (such a reference always links up with a b reference)
256 -- Subprogram Body end [DESIGNATOR];
257 -- Package Body end [[PARENT_UNIT_NAME .] IDENTIFIER];
258 -- Task Body end [task_IDENTIFIER];
259 -- Entry Body end [entry_IDENTIFIER];
260 -- Protected Body end [protected_IDENTIFIER]
261 -- Accept Statement end [entry_IDENTIFIER]];
263 -- Note that in the case of accept statements, there can
264 -- be multiple b and t entries for the same entity.
266 -- x is used to identify the reference as the entity from which
267 -- a tagged type is extended. This allows immediate access to
268 -- the parent of a tagged type.
270 -- z is used on the cross-reference line for a generic unit, to
271 -- mark the definition of a generic formal of the unit.
272 -- This entry type is similar to 'k' and 'p' in that it is an
273 -- implicit reference for an entity with a different name.
275 -- The characters >, <. =, and ^ are used on the cross-reference
276 -- line for a subprogram, to denote formal parameters and their
277 -- modes. As with the 'z' and 'p' entries, each such entry is
278 -- an implicit reference to an entity with a different name.
280 -- [..] is used for generic instantiation references. These
281 -- references are present only if the entity in question is
282 -- a generic entity, and in that case the [..] contains the
283 -- reference for the instantiation. In the case of nested
284 -- instantiations, this can be nested [...[...[...]]] etc.
285 -- The reference is of the form [file|line] no column is
286 -- present since it is assumed that only one instantiation
287 -- appears on a single source line. Note that the appearence
288 -- of file numbers in such references follows the normal
289 -- rules (present only if needed, and resets the current
290 -- file for subsequent references).
294 -- 44B5*Flag_Type{boolean} 5r23 6m45 3|9r35 11r56
296 -- This line gives references for the publicly visible Boolean
297 -- type Flag_Type declared on line 44, column 5. There are four
300 -- a reference on line 5, column 23 of the current file
302 -- a modification on line 6, column 45 of the current file
304 -- a reference on line 9, column 35 of unit number 3
306 -- a reference on line 11, column 56 of unit number 3
308 -- 2U13 p3=2:35 5b13 8r4 12r13 12t15
310 -- This line gives references for the non-publicly visible
311 -- procedure p3 declared on line 2, column 13. This procedure
312 -- renames the procedure whose identifier reference is at
313 -- line 2 column 35. There are four references:
315 -- the corresponding body entity at line 5, column 13,
316 -- of the current file.
318 -- a reference (e.g. a call) at line 8 column 4 of the
319 -- of the current file.
321 -- the END line of the body has an explict reference to
322 -- the name of the procedure at line 12, column 13.
324 -- the body ends at line 12, column 15, just past this label
326 -- 16I9*My_Type<2|4I9> 18r8
328 -- This line gives references for the publicly visible Integer
329 -- derived type My_Type declared on line 16, column 9. It also
330 -- gives references to the parent type declared in the unit
331 -- number 2 on line 4, column 9. There is one reference:
333 -- a reference (e.g. a variable declaration) at line 18 column
334 -- 4 of the current file.
336 -- 10I3*Genv{integer} 3|4I10[6|12]
338 -- This line gives a reference for the entity Genv in a generic
339 -- package. The reference in file 3, line 4, col 10, refers to
340 -- an instance of the generic where the instantiation can be
341 -- found in file 6 at line 12.
343 -- Continuation lines are used if the reference list gets too long,
344 -- a continuation line starts with a period, and then has references
345 -- continuing from the previous line. The references are sorted first
346 -- by unit, then by position in the source.
348 -- Note on handling of generic entities. The cross-reference is oriented
349 -- towards source references, so the entities in a generic instantiation
350 -- are not considered distinct from the entities in the template. All
351 -- definitions and references from generic instantiations are suppressed,
352 -- since they will be generated from the template. Any references to
353 -- entities in a generic instantiation from outside the instantiation
354 -- are considered to be references to the original template entity.
356 ----------------------------------------
357 -- Cross-Reference Entity Identifiers --
358 ----------------------------------------
360 -- In the cross-reference section of the ali file, entity types are
361 -- identified by a single letter, indicating the entity type. The
362 -- following table indicates the letter. A space for an entry is
363 -- used for entities that do not appear in the cross-reference table.
365 -- For objects, the character * appears in this table. In the xref
366 -- listing, this character is replaced by the lower case letter that
367 -- corresponds to the type of the object. For example, if a variable
368 -- is of a Float type, then, since the type is represented by an
369 -- upper case F, the object would be represented by a lower case f.
371 -- A special exception is the case of booleans, whose entities are
372 -- normal E_Enumeration_Type or E_Enumeration_Subtype entities, but
373 -- which appear as B/b in the xref lines, rather than E/e.
375 -- For private types, the character + appears in the table. In this
376 -- case the kind of the underlying type is used, if available, to
377 -- determine the character to use in the xref listing. The listing
378 -- will still include a '+' for a generic private type, for example,
379 -- but will retain the '*' for an object or formal parameter of such
382 -- For subprograms, the characters 'U' and 'V' appear in the table,
383 -- indicating procedures and functions. If the operation is abstract,
384 -- these letters are replaced in the xref by 'x' and 'y' respectively.
386 Xref_Entity_Letters : array (Entity_Kind) of Character :=
391 E_Discriminant => '*',
393 E_Loop_Parameter => '*',
394 E_In_Parameter => '*',
395 E_Out_Parameter => '*',
396 E_In_Out_Parameter => '*',
397 E_Generic_In_Out_Parameter => '*',
399 E_Generic_In_Parameter => '*',
400 E_Named_Integer => 'N',
402 E_Enumeration_Type => 'E', -- B for boolean
403 E_Enumeration_Subtype => 'E', -- B for boolean
405 E_Signed_Integer_Type => 'I',
406 E_Signed_Integer_Subtype => 'I',
407 E_Modular_Integer_Type => 'M',
408 E_Modular_Integer_Subtype => 'M',
409 E_Ordinary_Fixed_Point_Type => 'O',
411 E_Ordinary_Fixed_Point_Subtype => 'O',
412 E_Decimal_Fixed_Point_Type => 'D',
413 E_Decimal_Fixed_Point_Subtype => 'D',
414 E_Floating_Point_Type => 'F',
415 E_Floating_Point_Subtype => 'F',
417 E_Access_Type => 'P',
418 E_Access_Subtype => 'P',
419 E_Access_Attribute_Type => 'P',
420 E_Allocator_Type => ' ',
421 E_General_Access_Type => 'P',
423 E_Access_Subprogram_Type => 'P',
424 E_Access_Protected_Subprogram_Type => 'P',
425 E_Anonymous_Access_Subprogram_Type => ' ',
426 E_Anonymous_Access_Protected_Subprogram_Type => ' ',
427 E_Anonymous_Access_Type => ' ',
430 E_Array_Subtype => 'A',
431 E_String_Type => 'S',
432 E_String_Subtype => 'S',
433 E_String_Literal_Subtype => ' ',
435 E_Class_Wide_Type => 'C',
436 E_Class_Wide_Subtype => 'C',
437 E_Record_Type => 'R',
438 E_Record_Subtype => 'R',
439 E_Record_Type_With_Private => 'R',
441 E_Record_Subtype_With_Private => 'R',
442 E_Private_Type => '+',
443 E_Private_Subtype => '+',
444 E_Limited_Private_Type => '+',
445 E_Limited_Private_Subtype => '+',
447 E_Incomplete_Type => '+',
448 E_Incomplete_Subtype => '+',
450 E_Task_Subtype => 'T',
451 E_Protected_Type => 'W',
453 E_Protected_Subtype => 'W',
454 E_Exception_Type => ' ',
455 E_Subprogram_Type => ' ',
456 E_Enumeration_Literal => 'n',
462 E_Entry_Family => 'Y',
465 E_Entry_Index_Parameter => '*',
467 E_Generic_Function => 'v',
468 E_Generic_Package => 'k',
469 E_Generic_Procedure => 'u',
473 E_Return_Statement => ' ',
476 -- The following entities are not ones to which we gather
477 -- cross-references, since it does not make sense to do so
478 -- (e.g. references to a package are to the spec, not the body)
479 -- Indeed the occurrence of the body entity is considered to
480 -- be a reference to the spec entity.
482 E_Package_Body => ' ',
483 E_Protected_Object => ' ',
484 E_Protected_Body => ' ',
486 E_Subprogram_Body => ' ');
488 -- The following table is for information purposes. It shows the
489 -- use of each character appearing as an entity type.
491 -- letter lower case usage UPPER CASE USAGE
493 -- a array object (except string) array type (except string)
494 -- b Boolean object Boolean type
495 -- c class-wide object class-wide type
496 -- d decimal fixed-point object decimal fixed-point type
497 -- e non-Boolean enumeration object non_Boolean enumeration type
498 -- f floating-point object floating-point type
499 -- g (unused) (unused)
500 -- h Interface (Ada 2005) Abstract type
501 -- i signed integer object signed integer type
502 -- j (unused) (unused)
503 -- k generic package package
504 -- l label on loop label on statement
505 -- m modular integer object modular integer type
506 -- n enumeration literal named number
507 -- o ordinary fixed-point object ordinary fixed-point type
508 -- p access object access type
509 -- q label on block (unused)
510 -- r record object record type
511 -- s string object string type
512 -- t task object task type
513 -- u generic procedure procedure
514 -- v generic function or operator function or operator
515 -- w protected object protected type
516 -- x abstract procedure exception
517 -- y abstract function entry or entry family
518 -- z generic formal parameter (unused)
520 --------------------------------------
521 -- Handling of Imported Subprograms --
522 --------------------------------------
524 -- If a pragma Import or Interface applies to a subprogram, the
525 -- pragma is the completion of the subprogram. This is noted in
526 -- the ALI file by making the occurrence of the subprogram in the
527 -- pragma into a body reference ('b') and by including the external
528 -- name of the subprogram and its language, bracketed by '<' and '>'
529 -- in that reference. For example:
531 -- 3U13*elsewhere 4b<c,there>21
533 -- indicates that procedure elsewhere, declared at line 3, has a
534 -- pragma Import at line 4, that its body is in C, and that the link
535 -- name as given in the pragma is "there".
541 procedure Generate_Definition (E : Entity_Id);
542 -- Records the definition of an entity
544 procedure Generate_Operator_Reference
547 -- Node N is an operator node, whose entity has been set. If this entity
548 -- is a user defined operator (i.e. an operator not defined in package
549 -- Standard), then a reference to the operator is recorded at node N.
550 -- T is the operand type of of the operator. A reference to the operator
551 -- is an implicit reference to the type, and that needs to be recorded
552 -- to avoid spurious warnings on unused entities, when the operator is
553 -- a renaming of a predefined operator.
555 procedure Generate_Reference
558 Typ : Character := 'r';
559 Set_Ref : Boolean := True;
560 Force : Boolean := False);
561 -- This procedure is called to record a reference. N is the location
562 -- of the reference and E is the referenced entity. Typ is one of:
565 -- 'c' completion of incomplete or private type (see below)
566 -- 'e' end of construct
567 -- 'i' implicit reference
568 -- 'l' label on end line
570 -- 'p' primitive operation
571 -- 'r' standard reference
573 -- 'x' type extension
574 -- ' ' dummy reference (see below)
576 -- Note: all references to incomplete or private types are to the
577 -- original (incomplete or private type) declaration. The full
578 -- declaration is treated as a reference with type 'c'.
580 -- Note: all references to packages or subprograms are to the entity
581 -- for the spec. The entity in the body is treated as a reference
582 -- with type 'b'. Similar handling for references to subprogram formals.
584 -- The call has no effect if N is not in the extended main source unit
585 -- This check is omitted for type 'e' references (where it is useful to
586 -- have structural scoping information for other than the main source),
587 -- and for 'p' (since we want to pick up inherited primitive operations
588 -- that are defined in other packages).
590 -- The call also has no effect if any of the following conditions hold:
592 -- cross-reference collection is disabled
593 -- entity does not come from source (and Force is False)
594 -- reference does not come from source (and Force is False)
595 -- the entity is not one for which xrefs are appropriate
596 -- the type letter is blank
597 -- the node N is not an identifier, defining identifier, or expanded name
598 -- the type is 'p' and the entity is not in the extended main source
600 -- If all these conditions are met, then the Is_Referenced flag of E
601 -- is set (unless Set_Ref is False) and a cross-reference entry is
602 -- recorded for later output when Output_References is called.
604 -- Note: the dummy space entry is for the convenience of some callers,
605 -- who find it easier to pass a space to suppress the entry than to do
606 -- a specific test. The call has no effect if the type is a space.
608 -- The parameter Set_Ref is normally True, and indicates that in
609 -- addition to generating a cross-reference, the Referenced flag
610 -- of the specified entity should be set. If this parameter is
611 -- False, then setting of the Referenced flag is inhibited.
613 -- The parameter Force is set to True to force a reference to be
614 -- generated even if Comes_From_Source is false. This is used for
615 -- certain implicit references, and also for end label references.
617 procedure Generate_Reference_To_Formals (E : Entity_Id);
618 -- Add a reference to the definition of each formal on the line for
621 procedure Generate_Reference_To_Generic_Formals (E : Entity_Id);
622 -- Add a reference to the definition of each generic formal on the line
623 -- for a generic unit.
625 procedure Output_References;
626 -- Output references to the current ali file
628 procedure Initialize;
629 -- Initialize internal tables