1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2004 Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 2, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING. If not, write --
19 -- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
20 -- MA 02111-1307, USA. --
22 -- GNAT was originally developed by the GNAT team at New York University. --
23 -- Extensive contributions were provided by Ada Core Technologies Inc. --
25 ------------------------------------------------------------------------------
27 -- This package contains the routines for writing the library information
31 -----------------------------------
32 -- Format of Library Information --
33 -----------------------------------
35 -- This section describes the format of the library information that is
36 -- associated with object files. The exact method of this association is
37 -- potentially implementation dependent and is described and implemented
38 -- in package ali. From the point of view of the description here, all we
39 -- need to know is that the information is represented as a string of
40 -- characters that is somehow associated with an object file, and can be
41 -- retrieved. If no library information exists for a given object file,
42 -- then we take this as equivalent to the non-existence of the object
43 -- file, as if source file has not been previously compiled.
45 -- The library information is written as a series of lines of the form:
47 -- Key_Character parameter parameter ...
49 -- The following sections describe the format of these lines in detail
51 --------------------------------------
52 -- Making Changes to the ALI Format --
53 --------------------------------------
55 -- A number of tools use ali.adb to parse ali files. This means
56 -- that changes to this format can cause old versions of these tools
57 -- to be incompatible with new versions of the compiler. Any changes
58 -- to ali file formats must be carefully evaluated to understand any
59 -- such possible conflicts, and in particular, it is very undesirable
60 -- to create conflicts between older versions of GPS and newer versions
63 -- If the following guidelines are respected, downward compatibility
64 -- problems (old tools reading new ali files) should be minimized:
66 -- The basic key character format must be kept.
68 -- The V line must be the first line, this is checked by ali.adb
69 -- even in Ignore_Errors mode, and is used to verify that the file
70 -- at hand is indeed likely intended to be an ali file.
72 -- The P line must be present, though may be modified in contents
73 -- according to remaining guidelines. Again, ali.adb assumes the
74 -- P line is present even in Ignore_Errors mode.
76 -- New modifiers can generally be added (in particular adding new
77 -- two letter modifiers to the P or U lines is always safe)
79 -- Adding entirely new lines (with a new key letter) to the ali
80 -- file is always safe, at any point (other than before the V
81 -- line), since suchy lines will be ignored.
83 -- Following the guidelines in this section should ensure that this
84 -- problem is minimized and that old tools will be able to deal
85 -- successfully with new ali formats. Note that this does not apply
86 -- to the compiler itself, which always requires consistency between
87 -- the ali files and the binder. That is because one of the main
88 -- functions of the binder is to ensure consistency of the partition,
89 -- and this can be compromised if the ali files are inconsistent.
95 -- The initial header lines in the file give information about the
96 -- compilation environment, and identify other special information
97 -- such as main program parameters.
103 -- V "xxxxxxxxxxxxxxxx"
105 -- This line indicates the library output version, as defined in
106 -- Gnatvsn. It ensures that separate object modules of a program are
107 -- consistent. It has to be changed if anything changes which would
108 -- affect successful binding of separately compiled modules.
109 -- Examples of such changes are modifications in the format of the
110 -- library info described in this package, or modifications to
111 -- calling sequences, or to the way that data is represented.
113 -- Note: the V line absolutely must be the first line, and no change
114 -- to the ALI format should change this, since even in Ignore_Errors
115 -- mode, Scan_ALI insists on finding a V line.
117 -- ---------------------
118 -- -- M Main Program --
119 -- ---------------------
121 -- M type [priority] [T=time-slice] W=?
123 -- This line appears only if the main unit for this file is
124 -- suitable for use as a main program. The parameters are:
128 -- P for a parameterless procedure
129 -- F for a function returning a value of integral type
130 -- (used for writing a main program returning an exit status)
134 -- Present only if there was a valid pragma Priority in the
135 -- corresponding unit to set the main task priority. It is
136 -- an unsigned decimal integer.
140 -- Present only if there was a valid pragma Time_Slice in the
141 -- corresponding unit. It is an unsigned decimal integer in
142 -- the range 0 .. 10**9 giving the time slice value in units
143 -- of milliseconds. The actual significance of this parameter
144 -- is target dependent.
148 -- This parameter indicates the wide character encoding
149 -- method used when compiling the main program file. The ?
150 -- character is the single character used in the -gnatW?
151 -- switch. This is used to provide the default wide-character
152 -- encoding for Wide_Text_IO files.
160 -- One of these lines appears for each of the arguments present
161 -- in the call to the gnat1 program. This can be used if it is
162 -- necessary to reconstruct this call (e.g. for fix and continue)
164 -- -------------------
165 -- -- P Parameters --
166 -- -------------------
170 -- Indicates various information that applies to the compilation
171 -- of the corresponding source unit. Parameters is a sequence of
172 -- zero or more two letter codes that indicate configuration
173 -- pragmas and other parameters that apply:
175 -- The arguments are as follows:
177 -- CE Compilation errors. If this is present it means that the
178 -- ali file resulted from a compilation with the -gnatQ
179 -- switch set, and illegalities were detected. The ali
180 -- file contents may not be completely reliable, but the
181 -- format will be correct and complete. Note that NO is
182 -- always present if CE is present.
184 -- FD Configuration pragmas apply to all the units in this
185 -- file specifying a possibly non-standard floating point
186 -- format (VAX float with Long_Float using D_Float)
188 -- FG Configuration pragmas apply to all the units in this
189 -- file specifying a possibly non-standard floating point
190 -- format (VAX float with Long_Float using G_Float)
192 -- FI Configuration pragmas apply to all the units in this
193 -- file specifying a possibly non-standard floating point
194 -- format (IEEE Float)
196 -- Lx A valid Locking_Policy pragma applies to all the units
197 -- in this file, where x is the first character (upper case)
198 -- of the policy name (e.g. 'C' for Ceiling_Locking)
200 -- NO No object. This flag indicates that the units in this
201 -- file were not compiled to produce an object. This can
202 -- occur as a result of the use of -gnatc, or if no object
203 -- can be produced (e.g. when a package spec is compiled
204 -- instead of the body, or a subunit on its own).
206 -- NR No_Run_Time. Indicates that a pragma No_Run_Time applies
207 -- to all units in the file.
209 -- NS Normalize_Scalars pragma in effect for all units in
212 -- Qx A valid Queueing_Policy pragma applies to all the units
213 -- in this file, where x is the first character (upper case)
214 -- of the policy name (e.g. 'P' for Priority_Queueing).
216 -- SL Indicates that the unit is an Interface to a Standalone
217 -- Library. Note that this indication is never given by the
218 -- compiler, but is added by the Project Manager in gnatmake
219 -- when an Interface ALI file is copied to the library
222 -- SS This unit references System.Secondary_Stack (that is,
223 -- the unit makes use of the secondary stack facilities).
225 -- Tx A valid Task_Dispatching_Policy pragma applies to all
226 -- the units in this file, where x is the first character
227 -- (upper case) of the corresponding policy name (e.g. 'F'
228 -- for FIFO_Within_Priorities).
230 -- UA Unreserve_All_Interrupts pragma was processed in one or
231 -- more units in this file
233 -- UX Generated code contains unit exception table pointer
234 -- (i.e. it uses zero-cost exceptions, and there is at
235 -- least one subprogram present).
237 -- ZX Units in this file use zero-cost exceptions and have
238 -- generated exception tables. If ZX is not present, the
239 -- longjmp/setjmp exception scheme is in use.
241 -- Note that language defined units never output policy (Lx,Tx,Qx)
242 -- parameters. Language defined units must correctly handle all
243 -- possible cases. These values are checked for consistency by the
244 -- binder and then copied to the generated binder output file.
246 -- Note: The P line must be present. Even in Ignore_Errors mode,
247 -- Scan_ALI insists on finding a P line. So if changes are made to
248 -- the ALI format, they should not include removing the P line!
250 -- ---------------------
251 -- -- R Restrictions --
252 -- ---------------------
254 -- The R line records the status of restrictions generated by pragma
255 -- Restrictions encountered, as well as information on what the compiler
256 -- has been able to determine with respect to restrictions violations.
259 -- R <<restriction-characters>> space <<restriction-param-id-entries>>
261 -- The first parameter is a string of characters that records
262 -- information regarding restrictions that do not take parameter
263 -- not take parameter values. It is a string of characters, one
264 -- character for each value (in order) in All_Boolean_Restrictions.
265 -- There are three possible settings for each restriction:
267 -- r Restricted. Unit was compiled under control of a pragma
268 -- Restrictions for the corresponding restriction. In
269 -- this case the unit certainly does not violate the
270 -- Restriction, since this would have been detected by
273 -- n Not used. The unit was not compiled under control of a
274 -- pragma Restrictions for the corresponding restriction,
275 -- and does not make any use of the referenced feature.
277 -- v Violated. The unit was not compiled under control of a
278 -- pragma Restrictions for the corresponding restriction,
279 -- and it does indeed use the referenced feature.
281 -- This information is used in the binder to check consistency,
282 -- i.e. to detect cases where one unit has "r" and another unit
283 -- has "v", which is not permitted, since these restrictions
284 -- are partition-wide.
286 -- Following a space, the second parameter refers to restriction
287 -- identifiers for which a parameter is given.
289 -- The parameter is a string of entries, one for each value in
290 -- Restrict.All_Parameter_Restrictions. Each entry has two
291 -- components in sequence, the first indicating whether or not
292 -- there is a restriction, and the second indicating whether
293 -- or not the compiler detected violations. In the boolean case
294 -- it is not necessary to separate these, since if a restriction
295 -- is set, and violated, that is an error. But in the parameter
296 -- case, this is not true. For example, we can have a unit with
297 -- a pragma Restrictions (Max_Tasks => 4), where the compiler
298 -- can detect that there are exactly three tasks declared. Both
299 -- of these pieces of information must be passed to the binder.
300 -- The parameter of 4 is important in case the total number of
301 -- tasks in the partition is greater than 4. The parameter of
302 -- 3 is important in case some other unit has a restrictions
303 -- pragma with Max_Tasks=>2.
305 -- The component for the presence of restriction has one of two
308 -- n No pragma for this restriction is present in the
309 -- set of units for this ali file.
311 -- rN At least one pragma for this restriction is present
312 -- in the set of units for this ali file. The value N
313 -- is the minimum parameter value encountered in any
314 -- such pragma. N is in the range of Integer (a value
315 -- larger than N'Last causes the pragma to be ignored).
317 -- The component for the violation detection has one of three
320 -- n No violations were detected by the compiler
322 -- vN A violation was detected. N is either the maximum or total
323 -- count of violations (depending on the checking type) in
324 -- all the units represented by the ali file). Note that
325 -- this setting is only allowed for restrictions that are
326 -- in Checked_[Max|Sum]_Parameter_Restrictions. The value
327 -- here is known to be exact by the compiler and is in the
330 -- vN+ A violation was detected. The compiler cannot determine
331 -- the exact count of violations, but it is at least N.
333 -- There are no spaces within the parameter string, so the entry
334 -- described above in the header of this section for Max_Tasks would
335 -- appear as the string r4v3.
337 -- Note: The restrictions line is required to be present. Even in
338 -- Ignore_Errors mode, Scan_ALI expects to find an R line and will
339 -- signal a fatal error if it is missing. This means that future
340 -- changes to the ALI file format must retain the R line.
342 -- ------------------------
343 -- -- I Interrupt States --
344 -- ------------------------
346 -- I interrupt-number interrupt-state line-number
348 -- This line records information from an Interrupt_State pragma.
349 -- There is one line for each separate pragma, and if no such
350 -- pragmas are used, then no I lines are present.
352 -- The interrupt-number is an unsigned positive integer giving
353 -- the value of the interrupt as defined in Ada.Interrupts.Names.
355 -- The interrupt-state is one of r/s/u for Runtime/System/User
357 -- The line number is an unsigned decimal integer giving the
358 -- line number of the corresponding Interrupt_State pragma.
359 -- This is used in consistency messages.
361 ----------------------------
362 -- Compilation Unit Lines --
363 ----------------------------
365 -- Following these header lines, a set of information lines appears for
366 -- each compilation unit that appears in the corresponding object file.
367 -- In particular, when a package body or subprogram body is compiled,
368 -- there will be two sets of information, one for the spec and one for
369 -- the body. with the entry for the body appearing first. This is the
370 -- only case in which a single ALI file contains more than one unit (in
371 -- particular note that subunits do *not* count as compilation units for
372 -- this purpose, and generate no library information, since they are
375 -- --------------------
376 -- -- U Unit Header --
377 -- --------------------
379 -- The lines for each compilation unit have the following form.
381 -- U unit-name source-name version <<attributes>>
383 -- This line identifies the unit to which this section of the
384 -- library information file applies. The first three parameters are
385 -- the unit name in internal format, as described in package Uname,
386 -- and the name of the source file containing the unit.
388 -- Version is the version given as eight hexadecimal characters
389 -- with upper case letters. This value is the exclusive or of the
390 -- source checksums of the unit and all its semantically dependent
393 -- The <<attributes>> are a series of two letter codes indicating
394 -- information about the unit:
396 -- DE Dynamic Elaboration. This unit was compiled with the
397 -- dynamic elaboration model, as set by either the -gnatE
398 -- switch or pragma Elaboration_Checks (Dynamic).
400 -- EB Unit has pragma Elaborate_Body
402 -- EE Elaboration entity is present which must be set true when
403 -- the unit is elaborated. The name of the elaboration entity
404 -- is formed from the unit name in the usual way. If EE is
405 -- present, then this boolean must be set True as part of the
406 -- elaboration processing routine generated by the binder.
407 -- Note that EE can be set even if NE is set. This happens
408 -- when the boolean is needed solely for checking for the
409 -- case of access before elaboration.
411 -- GE Unit is a generic declaration, or corresponding body
413 -- IL Unit source uses a style with identifiers in all lower
414 -- IU case (IL) or all upper case (IU). If the standard mixed-
415 -- case usage is detected, or the compiler cannot determine
416 -- the style, then no I parameter will appear.
418 -- IS Initialize_Scalars pragma applies to this unit
420 -- KM Unit source uses a style with keywords in mixed case
421 -- KU (KM) or all upper case (KU). If the standard lower-case
422 -- usage is detected, or the compiler cannot determine the
423 -- style, then no K parameter will appear.
425 -- NE Unit has no elaboration routine. All subprogram bodies
426 -- and specs are in this category. Package bodies and specs
427 -- may or may not have NE set, depending on whether or not
428 -- elaboration code is required. Set if N_Compilation_Unit
429 -- node has flag Has_No_Elaboration_Code set.
431 -- PK Unit is package, rather than a subprogram
433 -- PU Unit has pragma Pure
435 -- PR Unit has pragma Preelaborate
437 -- RA Unit declares a Remote Access to Class-Wide (RACW) type
439 -- RC Unit has pragma Remote_Call_Interface
441 -- RT Unit has pragma Remote_Types
443 -- SP Unit has pragma Shared_Passive.
445 -- SU Unit is a subprogram, rather than a package
447 -- The attributes may appear in any order, separated by spaces.
449 -- ---------------------
450 -- -- W Withed Units --
451 -- ---------------------
453 -- Following each U line, is a series of lines of the form
455 -- W unit-name [source-name lib-name] [E] [EA] [ED]
457 -- One of these lines is present for each unit that is mentioned in
458 -- an explicit with clause by the current unit. The first parameter
459 -- is the unit name in internal format. The second parameter is the
460 -- file name of the file that must be compiled to compile this unit.
461 -- It is usually the file for the body, except for packages
462 -- which have no body; for units that need a body, if the source file
463 -- for the body cannot be found, the file name of the spec is used
464 -- instead. The third parameter is the file name of the library
465 -- information file that contains the results of compiling this unit.
466 -- The optional modifiers are used as follows:
468 -- E pragma Elaborate applies to this unit
470 -- EA pragma Elaborate_All applies to this unit
472 -- ED Elaborate_All_Desirable set for this unit, which means
473 -- that there is no Elaborate_All, but the analysis suggests
474 -- that Program_Error may be raised if the Elaborate_All
475 -- conditions cannot be satisfied. The binder will attempt
476 -- to treat ED as EA if it can.
478 -- The parameter source-name and lib-name are omitted for the case
479 -- of a generic unit compiled with earlier versions of GNAT which
480 -- did not generate object or ali files for generics.
482 -- -----------------------
483 -- -- L Linker_Options --
484 -- -----------------------
486 -- Following the W lines (if any, or the U line if not), are an
487 -- optional series of lines that indicates the usage of the pragma
488 -- Linker_Options in the associated unit. For each appearence of a
489 -- pragma Linker_Options (or Link_With) in the unit, a line is
490 -- present with the form:
494 -- where string is the string from the unit line enclosed in quotes.
495 -- Within the quotes the following can occur:
497 -- c graphic characters in range 20-7E other than " or {
498 -- "" indicating a single " character
499 -- {hh} indicating a character whose code is hex hh (0-9,A-F)
500 -- {00} [ASCII.NUL] is used as a separator character
501 -- to separate multiple arguments of a single
502 -- Linker_Options pragma.
504 -- For further details, see Stringt.Write_String_Table_Entry. Note
505 -- that wide characters in the form {hhhh} cannot be produced, since
506 -- pragma Linker_Option accepts only String, not Wide_String.
508 -- The L lines are required to appear in the same order as the
509 -- corresponding Linker_Options (or Link_With) pragmas appear in
510 -- the source file, so that this order is preserved by the binder
511 -- in constructing the set of linker arguments.
513 ---------------------
514 -- Reference Lines --
515 ---------------------
517 -- The reference lines contain information about references from
518 -- any of the units in the compilation (including, body version
519 -- and version attributes, linker options pragmas and source
522 -- ------------------------------------
523 -- -- E External Version References --
524 -- ------------------------------------
526 -- One of these lines is present for each use of 'Body_Version or
527 -- 'Version in any of the units of the compilation. These are used
528 -- by the linker to determine which version symbols must be output.
529 -- The format is simply:
533 -- where name is the external name, i.e. the unit name with either
534 -- a S or a B for spec or body version referenced (Body_Version
535 -- always references the body, Version references the Spec, except
536 -- in the case of a reference to a subprogram with no separate spec).
537 -- Upper half and wide character codes are encoded using the same
538 -- method as in Namet (Uhh for upper half, Whhhh for wide character,
539 -- where hh are hex digits).
541 -- ---------------------
542 -- -- D Dependencies --
543 -- ---------------------
545 -- The dependency lines indicate the source files on which the compiled
546 -- units depend. This is used by the binder for consistency checking.
547 -- These lines are also referenced by the cross-reference information.
549 -- D source-name time-stamp checksum [subunit-name] line:file-name
551 -- The time-stamp field contains the time stamp of the
552 -- corresponding source file. See types.ads for details on
553 -- time stamp representation.
555 -- The checksum is an 8-hex digit representation of the source
556 -- file checksum, with letters given in lower case.
558 -- The subunit name is present only if the dependency line is for
559 -- a subunit. It contains the fully qualified name of the subunit
560 -- in all lower case letters.
562 -- The line:file-name entry is present only if a Source_Reference
563 -- pragma appeared in the source file identified by source-name.
564 -- In this case, it gives the information from this pragma. Note
565 -- that this allows cross-reference information to be related back
566 -- to the original file. Note: the reason the line number comes
567 -- first is that a leading digit immediately identifies this as
568 -- a Source_Reference entry, rather than a subunit-name.
570 -- A line number of zero for line: in this entry indicates that
571 -- there is more than one source reference pragma. In this case,
572 -- the line numbers in the cross-reference are correct, and refer
573 -- to the original line number, but there is no information that
574 -- allows a reader of the ALI file to determine the exact mapping
575 -- of physical line numbers back to the original source.
577 -- Files with a zero checksum and a non-zero time stamp are in general
578 -- files on which the compilation depends but which are not Ada files
579 -- with further dependencies. This includes preprocessor data files
580 -- and preprocessor definition files.
582 -- Note: blank lines are ignored when the library information is
583 -- read, and separate sections of the file are separated by blank
584 -- lines to ease readability. Blanks between fields are also
587 -- For entries corresponding to files that were not present (and
588 -- thus resulted in error messages), or for files that are not
589 -- part of the dependency set, both the time stamp and checksum
590 -- are set to all zero characters. These dummy entries are ignored
591 -- by the binder in dependency checking, but must be present for
592 -- proper interpretation of the cross-reference data.
594 --------------------------
595 -- Cross-Reference Data --
596 --------------------------
598 -- The cross-reference data follows the dependency lines. See
599 -- the spec of Lib.Xref for details on the format of this data.
601 ----------------------
602 -- Global_Variables --
603 ----------------------
605 -- The table structure defined here stores one entry for each
606 -- Interrupt_State pragma encountered either in the main source or
607 -- in an ancillary with'ed source. Since interrupt state values
608 -- have to be consistent across all units in a partition, we may
609 -- as well detect inconsistencies at compile time when we can.
611 type Interrupt_State_Entry is record
612 Interrupt_Number : Pos;
613 -- Interrupt number value
615 Interrupt_State : Character;
616 -- Set to r/s/u for Runtime/System/User
618 Pragma_Loc : Source_Ptr;
619 -- Location of pragma setting this value in place
622 package Interrupt_States is new Table.Table (
623 Table_Component_Type => Interrupt_State_Entry,
624 Table_Index_Type => Nat,
625 Table_Low_Bound => 1,
627 Table_Increment => 200,
628 Table_Name => "Name_Interrupt_States");
634 procedure Ensure_System_Dependency;
635 -- This procedure ensures that a dependency is created on system.ads.
636 -- Even if there is no semantic dependency, Targparm has read the
637 -- file to acquire target parameters, so we need a source dependency.
639 procedure Write_ALI (Object : Boolean);
640 -- This procedure writes the library information for the current main unit
641 -- The Object parameter is true if an object file is created, and false
644 -- Note: in the case where we are not generating code (-gnatc mode), this
645 -- routine only writes an ALI file if it cannot find an existing up to
646 -- date ALI file. If it *can* find an existing up to date ALI file, then
647 -- it reads this file and sets the Lib.Compilation_Arguments table from
648 -- the A lines in this file.
650 procedure Add_Preprocessing_Dependency (S : Source_File_Index);
651 -- Indicate that there is a dependency to be added on a preprocessing
652 -- data file or on a preprocessing definition file.