1 # Makefile for GNU Compiler Collection
2 # Run 'configure' to generate Makefile from Makefile.in
4 # Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
5 # 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
7 #This file is part of GCC.
9 #GCC is free software; you can redistribute it and/or modify
10 #it under the terms of the GNU General Public License as published by
11 #the Free Software Foundation; either version 2, or (at your option)
14 #GCC is distributed in the hope that it will be useful,
15 #but WITHOUT ANY WARRANTY; without even the implied warranty of
16 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 #GNU General Public License for more details.
19 #You should have received a copy of the GNU General Public License
20 #along with GCC; see the file COPYING. If not, write to
21 #the Free Software Foundation, 59 Temple Place - Suite 330,
22 #Boston MA 02111-1307, USA.
24 # The targets for external use include:
25 # all, doc, proto, install, install-cross, install-cross-rest,
26 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
27 # stage1, stage2, stage3, stage4.
29 # This is the default target.
30 # Set by autoconf to "all.internal" for a native build, or
31 # "all.cross" to build a cross compiler.
34 # Depend on this to specify a phony target portably.
37 # This tells GNU make version 3 not to export the variables
38 # defined in this file into the environment (and thus recursive makes).
40 # And this tells it not to automatically pass command-line variables
44 # Suppress smart makes who think they know how to automake yacc and flex file
48 # The only suffixes we want for implicit rules are .c and .o, so clear
49 # the list and add them. This speeds up GNU Make, and allows -r to work.
50 # For i18n support, we also need .gmo, .po, .pox.
51 # This must come before the language makefile fragments to allow them to
52 # add suffixes and rules of their own.
54 .SUFFIXES: .c .o .po .pox .gmo
56 # -------------------------------
57 # Standard autoconf-set variables
58 # -------------------------------
63 target_noncanonical:=@target_noncanonical@
65 # Sed command to transform gcc to installed name.
66 program_transform_name := @program_transform_name@
68 # -----------------------------
69 # Directories used during build
70 # -----------------------------
72 # Directory where sources are, from where we are.
74 docdir = $(srcdir)/doc
76 # Top build directory, relative to here.
78 # objdir is set by configure.
79 # It's normally the absolute path to the current directory.
86 # Directory where sources are, from where we are.
89 # We define a vpath for the sources of the .texi files here because they
90 # are split between multiple directories and we would rather use one implicit
91 # pattern rule for everything.
92 # This vpath could be extended within the Make-lang fragments.
94 vpath %.texi $(docdir):$(docdir)/include
97 # Default values for variables overridden in Makefile fragments.
98 # These need to be quite early in the Makefile so as to avoid
99 # trouble induced by changes in fragment ordering.
102 # For ada/Make-lang.in; overridden in, for example, config/pa/x-ada.
112 # Variables that exist for you to override.
113 # See below for how to change them for certain systems.
115 # List of language subdirectories.
118 # Selection of languages to be made.
119 CONFIG_LANGUAGES = @all_languages@
120 LANGUAGES = c gcov$(exeext) gcov-dump$(exeext) $(CONFIG_LANGUAGES)
122 # Selection of languages to be made during stage1 build.
123 BOOT_LANGUAGES = c @all_boot_languages@
125 # Various ways of specifying flags for compilations:
126 # CFLAGS is for the user to override to, e.g., do a cross build with -O2.
127 # For recursive bootstrap builds CFLAGS is used to pass in STAGE1_CFLAGS
129 # STAGE1_CFLAGS is set by configure on some targets or passed from toplevel
130 # and sets the CFLAGS passed to stage1 of a bootstrap compilation.
131 # BOOT_CFLAGS is the value of CFLAGS to pass to the stage2, stage3 and stage4
132 # bootstrap compilations.
133 # XCFLAGS is used for most compilations but not when using the GCC just built.
134 # TCFLAGS is used for compilations with the GCC just built.
138 STAGE1_CFLAGS = -g @stage1_cflags@
141 # Flags to determine code coverage. When coverage is disabled, this will
142 # contain the optimization flags, as you normally want code coverage
143 # without optimization.
144 COVERAGE_FLAGS = @coverage_flags@
145 coverageexts = .{gcda,gcno}
147 # The warning flags are separate from BOOT_CFLAGS because people tend to
148 # override optimization flags and we'd like them to still have warnings
149 # turned on. These flags are also used to pass other stage dependent
150 # flags from configure. The user is free to explicitly turn these flags
152 # LOOSE_WARN are the warning flags to use when compiling something
153 # which is only compiled with gcc, such as libgcc and the frontends
155 # STRICT_WARN and STRICT2_WARN are the additional warning flags to
156 # apply to the back end and the C front end, which may be compiled
157 # with other compilers. This is partially controlled by configure in
158 # stage1, as not all versions of gcc understand -Wno-long-long.
159 LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
160 STRICT_WARN = @strict1_warn@
161 STRICT2_WARN = -pedantic -Wno-long-long -Wold-style-definition @WERROR@
163 # This is set by --enable-checking. The idea is to catch forgotten
164 # "extern" tags in header files.
165 NOCOMMON_FLAG = @nocommon_flag@
167 # This is set by --disable-maintainer-mode (default) to "#"
170 # These are set by --enable-checking=valgrind.
171 RUN_GEN = @valgrind_command@
172 VALGRIND_DRIVER_DEFINES = @valgrind_path_defines@
174 # This is how we control whether or not the additional warnings are applied.
175 .-warn = $(STRICT_WARN)
176 GCC_WARN_CFLAGS = $(LOOSE_WARN) $($(@D)-warn) $(NOCOMMON_FLAG) $($@-warn)
178 # These files are to have -Werror bypassed in stage2:
179 # These are very hard to completely clean due to target complexities.
180 gcc.o-warn = -Wno-error
181 insn-conditions.o-warn = -Wno-error
182 # Bison-1.75 output often yields (harmless) -Wtraditional warnings
183 gengtype-yacc.o-warn = -Wno-error
184 c-parse.o-warn = -Wno-error
185 # flex output may yield harmless "no previous prototype" warnings
186 gengtype-lex.o-warn = -Wno-error
187 # SYSCALLS.c misses prototypes
188 SYSCALLS.c.X-warn = -Wno-strict-prototypes -Wno-error
190 # All warnings have to be shut off in stage1 if the compiler used then
191 # isn't gcc; configure determines that. WARN_CFLAGS will be either
192 # $(GCC_WARN_CFLAGS), or nothing.
193 WARN_CFLAGS = @warn_cflags@
195 CPPFLAGS = @CPPFLAGS@
197 # These exists to be overridden by the x-* and t-* files, respectively.
214 # -------------------------------------------
215 # Programs which operate on the build machine
216 # -------------------------------------------
219 # pwd command to use. Allow user to override default by setting PWDCMD in
220 # the environment to account for automounters. The make variable must not
221 # be called PWDCMD, otherwise the value set here is passed to make
222 # subprocesses and overrides the setting from the user's environment.
223 # Don't use PWD since it is a common shell environment variable and we
224 # don't want to corrupt it.
225 PWD_COMMAND = $${PWDCMD-pwd}
226 # on sysV, define this as cp.
228 # Some systems may be missing symbolic links, regular links, or both.
229 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
232 # These permit overriding just for certain files.
233 INSTALL_PROGRAM = @INSTALL_PROGRAM@
234 INSTALL_DATA = @INSTALL_DATA@
235 INSTALL_SCRIPT = @INSTALL@
236 MAKEINFO = @MAKEINFO@
237 MAKEINFOFLAGS = --no-split
239 TEXI2POD = perl $(srcdir)/../contrib/texi2pod.pl
240 POD2MAN = pod2man --center="GNU" --release="gcc-$(version)"
241 # Some versions of `touch' (such as the version on Solaris 2.8)
242 # do not correctly set the timestamp due to buggy versions of `utime'
243 # in the kernel. So, we use `echo' instead.
244 STAMP = echo timestamp >
246 # Make sure the $(MAKE) variable is defined.
248 REMAKEFLAGS=LANGUAGES="$(LANGUAGES)" BOOT_CFLAGS="$(BOOT_CFLAGS)"
254 # Some compilers can't handle cc -c blah.c -o foo/blah.o.
255 # In stage2 and beyond, we force this to "-o $@" since we know we're using gcc.
256 OUTPUT_OPTION = @OUTPUT_OPTION@
258 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
259 # -I../zlib, unless we were configured with --with-system-zlib, in which
260 # case both are empty.
264 # Substitution type for target's getgroups 2nd arg.
265 TARGET_GETGROUPS_T = @TARGET_GETGROUPS_T@
267 # Target to use when installing include directory. Either
268 # install-headers-tar, install-headers-cpio or install-headers-cp.
269 INSTALL_HEADERS_DIR = @build_install_headers_dir@
271 # Header files that are made available under the same name
272 # to programs compiled with GCC.
273 USER_H = $(srcdir)/ginclude/float.h \
274 $(srcdir)/ginclude/iso646.h \
275 $(srcdir)/ginclude/stdarg.h \
276 $(srcdir)/ginclude/stdbool.h \
277 $(srcdir)/ginclude/stddef.h \
278 $(srcdir)/ginclude/varargs.h \
282 # The GCC to use for compiling libgcc.a and crt*.o.
283 # Usually the one we just built.
284 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
285 GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include -L$(objdir)/../ld
287 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
288 # It omits XCFLAGS, and specifies -B./.
289 # It also specifies -isystem ./include to find, e.g., stddef.h.
290 GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -Wold-style-definition $($@-warn) -isystem ./include $(TCFLAGS)
292 # ---------------------------------------------------
293 # Programs which produce files for the target machine
294 # ---------------------------------------------------
297 if [ -f $(objdir)/../binutils/ar ] ; then \
298 echo $(objdir)/../binutils/ar ; \
300 if [ "$(host)" = "$(target)" ] ; then \
303 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
306 AR_FLAGS_FOR_TARGET =
307 AR_CREATE_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) rc
308 AR_EXTRACT_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) x
309 RANLIB_FOR_TARGET = ` \
310 if [ -f $(objdir)/../binutils/ranlib ] ; then \
311 echo $(objdir)/../binutils/ranlib ; \
313 if [ "$(host)" = "$(target)" ] ; then \
316 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
320 if [ -f ./nm ] ; then \
322 elif [ -f $(objdir)/../binutils/nm-new ] ; then \
323 echo $(objdir)/../binutils/nm-new ; \
325 if [ "$(host)" = "$(target)" ] ; then \
328 t='$(program_transform_name)'; echo nm | sed -e $$t ; \
336 # Where to find some libiberty headers.
337 HASHTAB_H = $(srcdir)/../include/hashtab.h
338 OBSTACK_H = $(srcdir)/../include/obstack.h
339 SPLAY_TREE_H= $(srcdir)/../include/splay-tree.h
340 FIBHEAP_H = $(srcdir)/../include/fibheap.h
341 PARTITION_H = $(srcdir)/../include/partition.h
342 MD5_H = $(srcdir)/../include/md5.h
344 # Default native SYSTEM_HEADER_DIR, to be overridden by targets.
345 NATIVE_SYSTEM_HEADER_DIR = /usr/include
346 # Default cross SYSTEM_HEADER_DIR, to be overridden by targets.
347 CROSS_SYSTEM_HEADER_DIR = @CROSS_SYSTEM_HEADER_DIR@
349 # autoconf sets SYSTEM_HEADER_DIR to one of the above.
350 SYSTEM_HEADER_DIR = @SYSTEM_HEADER_DIR@
352 # Control whether to run fixproto and fixincludes.
353 STMP_FIXPROTO = @STMP_FIXPROTO@
354 STMP_FIXINC = @STMP_FIXINC@
356 # Test to see whether <limits.h> exists in the system header files.
357 LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]
359 # Directory for prefix to system directories, for
360 # each of $(system_prefix)/usr/include, $(system_prefix)/usr/lib, etc.
361 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
363 xmake_file=@xmake_file@
364 tmake_file=@tmake_file@
365 out_file=$(srcdir)/config/@out_file@
366 out_object_file=@out_object_file@
367 md_file=$(srcdir)/config/@md_file@
368 tm_file_list=@tm_file_list@
369 tm_include_list=@tm_include_list@
370 tm_defines=@tm_defines@
371 tm_p_file_list=@tm_p_file_list@
372 tm_p_include_list=@tm_p_include_list@
373 build_xm_file_list=@build_xm_file_list@
374 build_xm_include_list=@build_xm_include_list@
375 build_xm_defines=@build_xm_defines@
376 host_xm_file_list=@host_xm_file_list@
377 host_xm_include_list=@host_xm_include_list@
378 host_xm_defines=@host_xm_defines@
379 xm_file_list=@xm_file_list@
380 xm_include_list=@xm_include_list@
381 xm_defines=@xm_defines@
382 lang_checks=check-gcc
383 lang_opt_files=@lang_opt_files@ $(srcdir)/c.opt $(srcdir)/common.opt
384 lang_specs_files=@lang_specs_files@
385 lang_tree_files=@lang_tree_files@
386 target_cpu_default=@target_cpu_default@
387 GCC_THREAD_FILE=@thread_file@
388 OBJC_BOEHM_GC=@objc_boehm_gc@
389 GTHREAD_FLAGS=@gthread_flags@
390 extra_modes_file=@extra_modes_file@
391 host_hook_obj=@out_host_hook_obj@
392 # Be prepared for gcc2 merges.
393 gcc_version=@gcc_version@
394 gcc_version_trigger=@gcc_version_trigger@
395 version=$(gcc_version)
396 mainversion=`grep version_string $(srcdir)/version.c | sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/'`
398 # ------------------------
399 # Installation directories
400 # ------------------------
402 # Common prefix for installation directories.
403 # NOTE: This directory must exist when you start installation.
405 # Directory in which to put localized header files. On the systems with
406 # gcc as the native cc, `local_prefix' may not be `prefix' which is
408 # NOTE: local_prefix *should not* default from prefix.
409 local_prefix = @local_prefix@
410 # Directory in which to put host dependent programs and libraries
411 exec_prefix = @exec_prefix@
412 # Directory in which to put the executable for the command `gcc'
414 # Directory in which to put the directories used by the compiler.
416 # Directory in which GCC puts its executables.
417 libexecdir = @libexecdir@
423 # Directory in which the compiler finds libraries etc.
424 libsubdir = $(libdir)/gcc/$(target_noncanonical)/$(version)
425 # Directory in which the compiler finds executables
426 libexecsubdir = $(libexecdir)/gcc/$(target_noncanonical)/$(version)
427 # Used to produce a relative $(gcc_tooldir) in gcc.o
428 unlibsubdir = ../../..
429 # Directory in which to find other cross-compilation tools and headers.
431 # Used in install-cross.
432 gcc_tooldir = @gcc_tooldir@
433 # Used to install the shared libgcc.
435 # Since gcc_tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
436 build_tooldir = $(exec_prefix)/$(target_noncanonical)
437 # Directory in which the compiler finds target-independent g++ includes.
438 gcc_gxx_include_dir = @gcc_gxx_include_dir@
439 # Directory to search for site-specific includes.
440 local_includedir = $(local_prefix)/include
441 includedir = $(prefix)/include
442 # where the info files go
444 # Where cpp should go besides $prefix/bin if necessary
445 cpp_install_dir = @cpp_install_dir@
446 # where the locale files go
448 localedir = $(datadir)/locale
449 # Extension (if any) to put in installed man-page filename.
453 exeext = @host_exeext@
454 build_exeext = @build_exeext@
456 # Directory in which to put man pages.
458 man1dir = $(mandir)/man1
459 man7dir = $(mandir)/man7
460 # Dir for temp files.
463 # Whether we were configured with NLS.
466 # Internationalization library.
468 LIBINTL_DEP = @LIBINTL_DEP@
470 # Character encoding conversion library.
471 LIBICONV = @LIBICONV@
472 LIBICONV_DEP = @LIBICONV_DEP@
474 # The GC method to be used on this system.
477 # If a supplementary library is being used for the GC.
480 # libgcc.a may be built directly or via stmp-multilib,
481 # and installed likewise. Overridden by t-fragment.
483 INSTALL_LIBGCC = install-libgcc
485 # Options to use when compiling libgcc2.a.
487 LIBGCC2_DEBUG_CFLAGS = -g
488 LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
490 # Additional options to use when compiling libgcc2.a.
491 # Some targets override this to -isystem include
494 # Additional target-dependent options for compiling libgcc2.a.
495 TARGET_LIBGCC2_CFLAGS =
497 # Options to use when compiling crtbegin/end.
498 CRTSTUFF_CFLAGS = -O2 $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
499 -finhibit-size-directive -fno-inline-functions -fno-exceptions \
500 -fno-zero-initialized-in-bss -fno-unit-at-a-time
502 # Additional sources to handle exceptions; overridden by targets as needed.
503 LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde.c \
504 $(srcdir)/unwind-sjlj.c $(srcdir)/gthr-gnat.c $(srcdir)/unwind-c.c
505 LIB2ADDEHDEP = unwind.inc unwind-dw2-fde.h
507 # nm flags to list global symbols in libgcc object files.
510 # List of extra executables that should be compiled for this target machine
511 # that are used for compiling from source code to object code.
512 # The rules for compiling them should be in the t-* file for the machine.
513 EXTRA_PASSES =@extra_passes@
515 # Like EXTRA_PASSES, but these are used when linking.
516 EXTRA_PROGRAMS = @extra_programs@
518 # List of extra object files that should be compiled for this target machine.
519 # The rules for compiling them should be in the t-* file for the machine.
520 EXTRA_PARTS = @extra_parts@
522 # List of extra object files that should be compiled and linked with
523 # compiler proper (cc1, cc1obj, cc1plus).
524 EXTRA_OBJS = @extra_objs@
526 # List of extra object files that should be compiled and linked with
528 EXTRA_GCC_OBJS =@host_extra_gcc_objs@
530 # List of additional header files to install.
531 EXTRA_HEADERS =@extra_headers_list@
533 # It is convenient for configure to add the assignment at the beginning,
534 # so don't override it here.
535 USE_COLLECT2 = collect2$(exeext)
537 # List of extra C and assembler files to add to static and shared libgcc2.
538 # Assembler files should have names ending in `.asm'.
541 # List of extra C and assembler files to add to static libgcc2.
542 # Assembler files should have names ending in `.asm'.
543 LIB2FUNCS_STATIC_EXTRA =
545 # Program to convert libraries.
548 # Control whether header files are installed.
549 INSTALL_HEADERS=install-headers install-mkheaders
551 # Control whether Info documentation is built and installed.
552 BUILD_INFO = @BUILD_INFO@
554 # Control whether manpages generated by texi2pod.pl can be rebuilt.
555 GENERATED_MANPAGES = @GENERATED_MANPAGES@
557 # Additional directories of header files to run fixincludes on.
558 # These should be directories searched automatically by default
559 # just as /usr/include is.
560 # *Do not* use this for directories that happen to contain
561 # header files, but are not searched automatically by default.
562 # On most systems, this is empty.
563 OTHER_FIXINCLUDES_DIRS=
565 # A list of all the language-specific executables.
566 COMPILERS = cc1$(exeext) @all_compilers@
568 # List of things which should already be built whenever we try to use xgcc
569 # to compile anything (without linking).
570 GCC_PASSES=xgcc$(exeext) cc1$(exeext) specs $(EXTRA_PASSES)
572 # List of things which should already be built whenever we try to use xgcc
574 GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS)
576 # Directory to link to, when using the target `maketest'.
579 # Flags to use when cross-building GCC.
580 # Prefix to apply to names of object files when using them
581 # to run on the machine we are compiling on.
582 BUILD_PREFIX = @BUILD_PREFIX@
583 # Prefix to apply to names of object files when compiling them
584 # to run on the machine we are compiling on.
585 # The default for this variable is chosen to keep these rules
586 # out of the way of the other rules for compiling the same source files.
587 BUILD_PREFIX_1 = @BUILD_PREFIX_1@
588 # Native compiler for the build machine and its switches.
589 CC_FOR_BUILD = @CC_FOR_BUILD@
590 BUILD_CFLAGS= @BUILD_CFLAGS@ -DGENERATOR_FILE
592 # Native linker and preprocessor flags. For x-fragment overrides.
593 BUILD_LDFLAGS=$(LDFLAGS)
594 BUILD_CPPFLAGS=$(ALL_CPPFLAGS)
596 # Actual name to use when installing a native compiler.
597 GCC_INSTALL_NAME := $(shell echo gcc|sed '$(program_transform_name)')
598 GCC_TARGET_INSTALL_NAME := $(target_noncanonical)-$(shell echo gcc|sed '$(program_transform_name)')
599 CPP_INSTALL_NAME := $(shell echo cpp|sed '$(program_transform_name)')
600 PROTOIZE_INSTALL_NAME := $(shell echo protoize|sed '$(program_transform_name)')
601 UNPROTOIZE_INSTALL_NAME := $(shell echo unprotoize|sed '$(program_transform_name)')
602 GCOV_INSTALL_NAME := $(shell echo gcov|sed '$(program_transform_name)')
603 GCCBUG_INSTALL_NAME := $(shell echo gccbug|sed '$(program_transform_name)')
605 # Setup the testing framework, if you have one
606 EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \
607 echo $${rootme}/../expect/expect ; \
608 else echo expect ; fi`
610 RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
611 echo $${srcdir}/../dejagnu/runtest ; \
612 else echo runtest; fi`
615 # Extra symbols for fixproto to define when parsing headers.
618 # Extra flags to use when compiling crt{begin,end}.o.
621 # Extra flags to use when compiling [m]crt0.o.
624 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
627 # Should T contain a `=', libgcc.mk will make T_TARGET, setting
628 # $(T_TARGET) to the name of the actual target filename.
630 T_TARGET : $(T_TARGET)
632 # This should name the specs file that we're going to install. Target
633 # Makefiles may override it and name another file to be generated from
634 # the built-in specs and installed as the default spec, as long as
635 # they also introduce a rule to generate a file name specs, to be used
639 # End of variables for you to override.
641 # GTM_H lists the config files that the generator files depend on,
642 # while TM_H lists the ones ordinary gcc files depend on, which
643 # includes several files generated by those generators.
644 BCONFIG_H = bconfig.h $(build_xm_file_list)
645 CONFIG_H = config.h $(host_xm_file_list)
646 TCONFIG_H = tconfig.h $(xm_file_list)
647 TM_P_H = tm_p.h $(tm_p_file_list)
648 GTM_H = tm.h $(tm_file_list)
649 TM_H = $(GTM_H) insn-constants.h insn-flags.h
651 TARGET_H = $(TM_H) target.h
653 LANGHOOKS_DEF_H = langhooks-def.h $(HOOKS_H)
654 TARGET_DEF_H = target-def.h $(HOOKS_H)
655 MACHMODE_H = machmode.h mode-classes.def insn-modes.h
656 RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
657 RTL_H = $(RTL_BASE_H) genrtl.h input.h
658 PARAMS_H = params.h params.def
659 TREE_H = tree.h tree.def $(MACHMODE_H) tree-check.h version.h builtins.def \
661 BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h $(PARTITION_H) \
662 hard-reg-set.h cfghooks.h
663 COVERAGE_H = coverage.h gcov-io.h gcov-iov.h
664 DEMANGLE_H = $(srcdir)/../include/demangle.h
667 OPTABS_H = optabs.h insn-codes.h
668 REGS_H = regs.h varray.h $(MACHMODE_H)
669 INTEGRATE_H = integrate.h varray.h
670 LOOP_H = loop.h varray.h bitmap.h
671 GCC_H = gcc.h version.h
672 GGC_H = ggc.h gtype-desc.h
673 TIMEVAR_H = timevar.h timevar.def
674 INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h
675 C_COMMON_H = c-common.h $(SPLAY_TREE_H) $(CPPLIB_H)
676 C_TREE_H = c-tree.h $(C_COMMON_H)
677 SYSTEM_H = system.h hwint.h $(srcdir)/../include/libiberty.h
678 PREDICT_H = predict.h predict.def
679 CPPLIB_H = cpplib.h line-map.h
680 PRETTY_PRINT_H = pretty-print.h input.h $(OBSTACK_H)
681 DIAGNOSTIC_H = diagnostic.h diagnostic.def $(PRETTY_PRINT_H)
682 C_PRETTY_PRINT_H = $(PRETTY_PRINT_H) $(C_COMMON_H) $(TREE_H)
685 ifneq ($(tmake_file),)
686 include $(tmake_file)
690 ifneq ($(xmake_file),)
691 include $(xmake_file)
695 # Now figure out from those variables how to compile and link.
697 # IN_GCC distinguishes between code compiled into GCC itself and other
698 # programs built during a bootstrap.
699 # autoconf inserts -DCROSS_COMPILE if we are building a cross compiler.
700 INTERNAL_CFLAGS = -DIN_GCC @CROSS@
702 # This is the variable actually used when we compile. If you change this,
703 # you probably want to update BUILD_CFLAGS in configure.ac
704 ALL_CFLAGS = $(X_CFLAGS) $(T_CFLAGS) \
705 $(CFLAGS) $(INTERNAL_CFLAGS) $(COVERAGE_FLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@
708 ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
710 # Build and host support libraries. FORBUILD is either
711 # .. or ../$(build_alias) depending on whether host != build.
712 LIBIBERTY = ../libiberty/libiberty.a
713 BUILD_LIBIBERTY = @FORBUILD@/libiberty/libiberty.a
715 # Dependencies on the intl and portability libraries.
716 LIBDEPS= $(LIBIBERTY) $(LIBINTL_DEP) $(LIBICONV_DEP) libcpp.a
718 # Likewise, for use in the tools that must run on this machine
719 # even if we are cross-building GCC.
720 BUILD_LIBDEPS= $(BUILD_LIBIBERTY)
722 # How to link with both our special library facilities
723 # and the system's installed libraries.
724 LIBS = @LIBS@ libcpp.a $(LIBIBERTY) $(LIBINTL) $(LIBICONV)
726 # Any system libraries needed just for GNAT.
727 SYSLIBS = @GNAT_LIBEXC@
729 # Libs needed (at present) just for jcf-dump.
730 LDEXP_LIB = @LDEXP_LIB@
732 # Likewise, for use in the tools that must run on this machine
733 # even if we are cross-building GCC.
734 BUILD_LIBS = $(BUILD_LIBIBERTY)
736 BUILD_RTL = $(BUILD_PREFIX)rtl.o read-rtl.o $(BUILD_PREFIX)bitmap.o \
737 $(BUILD_PREFIX)ggc-none.o min-insn-modes.o
738 BUILD_SUPPORT = gensupport.o insn-conditions.o
739 BUILD_EARLY_SUPPORT = gensupport.o dummy-conditions.o
741 BUILD_PRINT = print-rtl1.o
742 BUILD_ERRORS = $(BUILD_PREFIX)errors.o
743 BUILD_VARRAY = $(BUILD_PREFIX)varray.o
745 # Specify the directories to be searched for header files.
746 # Both . and srcdir are used, in that order,
747 # so that *config.h will be found in the compilation
748 # subdirectory rather than in the source directory.
749 # -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file
750 # currently being compiled, in both source trees, to be examined as well.
751 # libintl.h will be found in ../intl if we are using the included libintl.
752 INCLUDES = -I. -I$(@D) -I$(srcdir) -I$(srcdir)/$(@D) \
753 -I$(srcdir)/../include @INCINTL@
756 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
759 # Support for additional languages (other than C).
760 # C can be supported this way too (leave for later).
762 LANG_MAKEFRAGS = @all_lang_makefrags@
763 LANG_MAKEFILES = @all_lang_makefiles@
764 LANG_STAGESTUFF = @all_stagestuff@
766 # Flags to pass to recursive makes.
767 # CC is set by configure. Hosts without symlinks need special handling
768 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
770 # ??? The choices here will need some experimenting with.
773 export AR_CREATE_FOR_TARGET
774 export AR_FLAGS_FOR_TARGET
775 export AR_EXTRACT_FOR_TARGET
778 export BUILD_PREFIX_1
780 export GCC_FOR_TARGET
784 export LIBGCC2_CFLAGS
787 export RANLIB_FOR_TARGET
791 ORDINARY_FLAGS_TO_PASS = \
793 "BISONFLAGS=$(BISONFLAGS)" \
794 "CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
795 "LDFLAGS=$(LDFLAGS)" \
797 "FLEXFLAGS=$(FLEXFLAGS)" \
800 "MAKEINFO=$(MAKEINFO)" \
801 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
805 "build_exeext=$(build_exeext)" \
807 "exec_prefix=$(exec_prefix)" \
809 "local_prefix=$(local_prefix)" \
810 "gxx_include_dir=$(gcc_gxx_include_dir)" \
811 "build_tooldir=$(build_tooldir)" \
812 "gcc_tooldir=$(gcc_tooldir)" \
814 "libexecsubdir=$(libsubdir)" \
815 "datadir=$(datadir)" \
816 "localedir=$(localedir)"
817 FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) "CC=@cc_set_by_configure@" \
818 "STAGE_PREFIX=@stage_prefix_set_by_configure@"
819 PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \
820 -e 's|^ *[^ /][^ /]*/|%&|' \
822 -e 's|% *[^- /]|%&|g' \
825 SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \
826 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`" \
827 "STAGE_PREFIX=`echo @quoted_stage_prefix_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
829 # Lists of files for various purposes.
831 # Target specific, C specific object file
832 C_TARGET_OBJS=@c_target_objs@
834 # Target specific, C++ specific object file
835 CXX_TARGET_OBJS=@cxx_target_objs@
837 # Language-specific object files for C and Objective C.
838 C_AND_OBJC_OBJS = attribs.o c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
839 c-convert.o c-aux-info.o c-common.o c-opts.o c-format.o c-semantics.o \
840 c-incpath.o cppdefault.o c-ppoutput.o c-cppbuiltin.o prefix.o \
841 c-objc-common.o c-dump.o c-pch.o $(C_TARGET_OBJS)
843 # Language-specific object files for C.
844 C_OBJS = c-parse.o c-lang.o c-pretty-print.o stub-objc.o $(C_AND_OBJC_OBJS)
846 # Language-independent object files.
849 alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
850 cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfglayout.o cfgloop.o \
851 cfgloopanal.o cfgloopmanip.o loop-init.o loop-unswitch.o loop-unroll.o \
852 cfgrtl.o combine.o conflict.o convert.o coverage.o cse.o cselib.o \
853 dbxout.o debug.o df.o diagnostic.o dojump.o doloop.o dominance.o \
854 dwarf2asm.o dwarf2out.o emit-rtl.o except.o explow.o \
855 expmed.o expr.o final.o flow.o fold-const.o function.o gcse.o \
856 genrtl.o ggc-common.o global.o graph.o gtype-desc.o \
857 haifa-sched.o hooks.o ifcvt.o insn-attrtab.o insn-emit.o insn-modes.o \
858 insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \
859 integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
860 loop.o optabs.o options.o opts.o params.o postreload.o predict.o \
861 print-rtl.o print-tree.o value-prof.o \
862 profile.o ra.o ra-build.o ra-colorize.o ra-debug.o ra-rewrite.o \
863 real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \
864 reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o rtl-error.o \
865 sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \
866 sibcall.o simplify-rtx.o sreal.o stmt.o stor-layout.o stringpool.o \
867 targhooks.o timevar.o toplev.o tracer.o tree.o tree-dump.o unroll.o \
868 varasm.o varray.o version.o vmsdbgout.o xcoffout.o alloc-pool.o \
869 et-forest.o cfghooks.o bt-load.o pretty-print.o $(GGC) web.o
871 OBJS-md = $(out_object_file)
872 OBJS-archive = $(EXTRA_OBJS) $(host_hook_obj) hashtable.o tree-inline.o \
873 tree-optimize.o cgraph.o cgraphunit.o
875 OBJS = $(OBJS-common) $(out_object_file) $(OBJS-archive)
877 OBJS-onestep = libbackend.o $(OBJS-archive)
879 BACKEND = main.o libbackend.a
881 # Files to be copied away after each stage in building.
882 STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
883 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
884 insn-attr.h insn-attrtab.c insn-opinit.c insn-constants.h tm-preds.h \
885 tree-check.h insn-conditions.c min-insn-modes.c insn-modes.c insn-modes.h \
886 s-flags s-config s-codes s-mlib s-genrtl s-modes s-gtype gtyp-gen.h \
887 s-output s-recog s-emit s-extract s-peep s-check s-conditions \
888 s-attr s-attrtab s-opinit s-preds s-constants s-crt0 \
889 genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
890 genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
891 genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
892 genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
893 gencheck$(build_exeext) genpreds$(build_exeext) genconstants$(build_exeext) \
894 gengtype$(build_exeext) genconditions$(build_exeext) genmodes$(build_exeext) \
895 genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c \
896 xgcc$(exeext) cpp$(exeext) cc1$(exeext) $(EXTRA_PASSES) \
897 $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
898 protoize$(exeext) unprotoize$(exeext) \
899 $(SPECS) collect2$(exeext) $(USE_COLLECT2) \
900 gcov-iov$(build_exeext) gcov$(exeext) gcov-dump$(exeext) \
901 *.[0-9][0-9].* *.[si] libcpp.a libbackend.a libgcc.mk \
904 # Defined in libgcc2.c, included only in the static library.
905 LIB2FUNCS_ST = _eprintf __gcc_bcmp
907 # Defined in libgcov.c, included only in gcov library
908 LIBGCOV = _gcov _gcov_merge_add _gcov_merge_single _gcov_merge_delta
910 FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
911 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
912 _lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
913 _sf_to_df _sf_to_tf _thenan_sf _sf_to_usi _usi_to_sf
915 DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
916 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
917 _lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
918 _df_to_sf _df_to_tf _thenan_df _df_to_usi _usi_to_df
920 TPBIT_FUNCS = _pack_tf _unpack_tf _addsub_tf _mul_tf _div_tf \
921 _fpcmp_parts_tf _compare_tf _eq_tf _ne_tf _gt_tf _ge_tf \
922 _lt_tf _le_tf _unord_tf _si_to_tf _tf_to_si _negate_tf _make_tf \
923 _tf_to_df _tf_to_sf _thenan_tf _tf_to_usi _usi_to_tf
925 # These might cause a divide overflow trap and so are compiled with
927 LIB2_DIVMOD_FUNCS = _divdi3 _moddi3 _udivdi3 _umoddi3 _udiv_w_sdiv _udivmoddi4
930 # Language makefile fragments.
932 # The following targets define the interface between us and the languages.
934 # all.cross, start.encap, rest.encap,
935 # install-normal, install-common, install-info, install-man,
937 # mostlyclean, clean, distclean, maintainer-clean,
938 # stage1, stage2, stage3, stage4
940 # Each language is linked in with a series of hooks. The name of each
941 # hooked is "lang.${target_name}" (eg: lang.info). Configure computes
942 # and adds these here. We use double-colon rules for some of the hooks;
943 # double-colon rules should be preferred for any new hooks.
945 # language hooks, generated by configure
948 # per-language makefile fragments
949 ifneq ($(LANG_MAKEFRAGS),)
950 include $(LANG_MAKEFRAGS)
955 # -----------------------------
956 # Rebuilding this configuration
957 # -----------------------------
959 Makefile: config.status $(srcdir)/Makefile.in $(srcdir)/version.c $(LANG_MAKEFRAGS)
960 LANGUAGES="$(CONFIG_LANGUAGES)" \
962 CONFIG_SHELL="$(SHELL)" \
963 CONFIG_FILES=$@ $(SHELL) config.status
965 config.h: cs-config.h ; @true
966 bconfig.h: cs-bconfig.h ; @true
967 tconfig.h: cs-tconfig.h ; @true
968 tm.h: cs-tm.h ; @true
969 tm_p.h: cs-tm_p.h ; @true
971 cs-config.h: Makefile
972 TARGET_CPU_DEFAULT="" \
973 HEADERS="$(host_xm_include_list)" DEFINES="$(host_xm_defines)" \
974 $(SHELL) $(srcdir)/mkconfig.sh config.h
976 cs-bconfig.h: Makefile
977 TARGET_CPU_DEFAULT="" \
978 HEADERS="$(build_xm_include_list)" DEFINES="$(build_xm_defines)" \
979 $(SHELL) $(srcdir)/mkconfig.sh bconfig.h
981 cs-tconfig.h: Makefile
982 TARGET_CPU_DEFAULT="" \
983 HEADERS="$(xm_include_list)" DEFINES="$(xm_defines)" \
984 $(SHELL) $(srcdir)/mkconfig.sh tconfig.h
987 TARGET_CPU_DEFAULT="$(target_cpu_default)" \
988 HEADERS="$(tm_include_list)" DEFINES="$(tm_defines)" \
989 $(SHELL) $(srcdir)/mkconfig.sh tm.h
992 TARGET_CPU_DEFAULT="" \
993 HEADERS="$(tm_p_include_list)" DEFINES="" \
994 $(SHELL) $(srcdir)/mkconfig.sh tm_p.h
996 # Don't automatically run autoconf, since configure.ac might be accidentally
997 # newer than configure. Also, this writes into the source directory which
998 # might be on a read-only file system. If configured for maintainer mode
999 # then do allow autoconf to be run.
1001 $(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac
1002 (cd $(srcdir) && autoconf)
1004 gccbug: $(srcdir)/gccbug.in
1005 CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status
1007 mklibgcc: $(srcdir)/mklibgcc.in
1008 CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status
1010 mkheaders: $(srcdir)/mkheaders.in
1011 CONFIG_FILES=mkheaders CONFIG_HEADERS= ./config.status
1013 # cstamp-h.in controls rebuilding of config.in.
1014 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
1015 # delete it. A stamp file is needed as autoheader won't update the file if
1016 # nothing has changed.
1017 # It remains in the source directory and is part of the distribution.
1018 # This follows what is done in shellutils, fileutils, etc.
1019 # "echo timestamp" is used instead of touch to be consistent with other
1020 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
1021 # ??? Newer versions have a maintainer mode that may be useful here.
1023 # Don't run autoheader automatically either.
1024 # Only run it if maintainer mode is enabled.
1025 @MAINT@ $(srcdir)/config.in: $(srcdir)/cstamp-h.in
1026 @MAINT@ $(srcdir)/cstamp-h.in: $(srcdir)/configure.ac
1027 @MAINT@ (cd $(srcdir) && autoheader)
1028 @MAINT@ @rm -f $(srcdir)/cstamp-h.in
1029 @MAINT@ echo timestamp > $(srcdir)/cstamp-h.in
1030 auto-host.h: cstamp-h ; @true
1031 cstamp-h: config.in config.status
1032 CONFIG_HEADERS=auto-host.h:config.in \
1034 LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status
1036 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
1037 # a target to build even if it is up-to-date. So we must verify that
1038 # config.status does not exist before failing.
1039 config.status: $(srcdir)/configure $(srcdir)/config.gcc version.c
1040 @if [ ! -f config.status ] ; then \
1041 echo You must configure gcc. Look at http://gcc.gnu.org/install/ for details.; \
1044 LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status --recheck; \
1051 all.internal: start.encap rest.encap doc
1052 # This is what to compile if making a cross-compiler.
1053 all.cross: native gcc-cross cpp$(exeext) specs \
1054 $(LIBGCC) $(EXTRA_PARTS) lang.all.cross doc
1055 # This is what must be made before installing GCC and converting libraries.
1056 start.encap: native xgcc$(exeext) cpp$(exeext) specs \
1057 xlimits.h lang.start.encap @GENINSRC@ srcextra lang.srcextra
1058 # These can't be made until after GCC can run.
1059 rest.encap: $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
1060 # This is what is made with the host's compiler
1061 # whether making a cross compiler or not.
1062 native: config.status auto-host.h build-@POSUB@ $(LANGUAGES) \
1063 $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
1065 # Define the names for selecting languages in LANGUAGES.
1069 # Tell GNU make these are phony targets.
1070 .PHONY: C c PROTO proto
1072 # On the target machine, finish building a cross compiler.
1073 # This does the things that can't be done on the host machine.
1074 rest.cross: $(LIBGCC) specs
1076 # Recompile all the language-independent object files.
1077 # This is used only if the user explicitly asks for it.
1078 compilations: $(BACKEND)
1080 # Like libcpp.a, this archive is strictly for the host.
1081 libbackend.a: $(OBJS@onestep@)
1082 -rm -rf libbackend.a
1083 $(AR) $(AR_FLAGS) libbackend.a $(OBJS@onestep@)
1084 -$(RANLIB) libbackend.a
1086 # We call this executable `xgcc' rather than `gcc'
1087 # to avoid confusion if the current directory is in the path
1088 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
1089 xgcc$(exeext): gcc.o gccspec.o version.o intl.o prefix.o \
1090 version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
1091 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o gccspec.o intl.o \
1092 prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
1094 # cpp is to cpp0 as gcc is to cc1.
1095 # The only difference from xgcc is that it's linked with cppspec.o
1096 # instead of gccspec.o.
1097 cpp$(exeext): gcc.o cppspec.o version.o intl.o prefix.o \
1098 version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
1099 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o cppspec.o intl.o \
1100 prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
1102 # Dump a specs file to make -B./ read these specs over installed ones.
1103 $(SPECS): xgcc$(exeext)
1104 $(GCC_FOR_TARGET) -dumpspecs > tmp-specs
1105 mv tmp-specs $(SPECS)
1107 # We do want to create an executable named `xgcc', so we can use it to
1108 # compile libgcc2.a.
1109 # Also create gcc-cross, so that install-common will install properly.
1110 gcc-cross: xgcc$(exeext)
1111 cp xgcc$(exeext) gcc-cross$(exeext)
1113 cc1$(exeext): $(C_OBJS) $(BACKEND) $(LIBDEPS)
1114 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1$(exeext) \
1115 $(C_OBJS) $(BACKEND) $(LIBS)
1117 # Build the version of limits.h that we will install.
1118 xlimits.h: glimits.h limitx.h limity.h
1119 if $(LIMITS_H_TEST) ; then \
1120 cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
1122 cat $(srcdir)/glimits.h > tmp-xlimits.h; \
1124 mv tmp-xlimits.h xlimits.h
1128 LIB2ADD = $(LIB2FUNCS_EXTRA)
1129 LIB2ADD_ST = $(LIB2FUNCS_STATIC_EXTRA)
1131 libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) $(LIB2ADD_ST) xgcc$(exeext) specs
1132 objext='$(objext)' \
1133 LIB1ASMFUNCS='$(LIB1ASMFUNCS)' \
1134 LIB2FUNCS_ST='$(LIB2FUNCS_ST)' \
1135 LIBGCOV='$(LIBGCOV)' \
1136 LIB2ADD='$(LIB2ADD)' \
1137 LIB2ADD_ST='$(LIB2ADD_ST)' \
1138 LIB2ADDEH='$(LIB2ADDEH)' \
1139 LIB2ADDEHDEP='$(LIB2ADDEHDEP)' \
1141 FPBIT_FUNCS='$(FPBIT_FUNCS)' \
1142 LIB2_DIVMOD_FUNCS='$(LIB2_DIVMOD_FUNCS)' \
1144 DPBIT_FUNCS='$(DPBIT_FUNCS)' \
1146 TPBIT_FUNCS='$(TPBIT_FUNCS)' \
1147 MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \
1148 EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \
1149 SHLIB_LINK='$(SHLIB_LINK)' \
1150 SHLIB_INSTALL='$(SHLIB_INSTALL)' \
1151 SHLIB_EXT='$(SHLIB_EXT)' \
1152 SHLIB_MULTILIB='$(SHLIB_MULTILIB)' \
1153 SHLIB_MKMAP='$(SHLIB_MKMAP)' \
1154 SHLIB_MKMAP_OPTS='$(SHLIB_MKMAP_OPTS)' \
1155 SHLIB_MAPFILES='$(SHLIB_MAPFILES)' \
1156 SHLIB_NM_FLAGS='$(SHLIB_NM_FLAGS)' \
1157 MULTILIB_OSDIRNAMES='$(MULTILIB_OSDIRNAMES)' \
1158 mkinstalldirs='$(SHELL) $(srcdir)/mkinstalldirs' \
1159 $(SHELL) mklibgcc > tmp-libgcc.mk
1160 mv tmp-libgcc.mk libgcc.mk
1162 # All the things that might cause us to want to recompile bits of libgcc.
1163 LIBGCC_DEPS = $(GCC_PASSES) $(LANGUAGES) stmp-int-hdrs $(STMP_FIXPROTO) \
1164 libgcc.mk $(srcdir)/libgcc2.c $(srcdir)/libgcov.c $(TCONFIG_H) \
1165 $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs \
1166 tsystem.h $(FPBIT) $(DPBIT) $(TPBIT) $(LIB2ADD) \
1167 $(LIB2ADD_ST) $(LIB2ADDEH) $(LIB2ADDEHDEP) $(EXTRA_PARTS) \
1168 $(srcdir)/config/$(LIB1ASMSRC) \
1169 $(srcdir)/gcov-io.h $(srcdir)/gcov-io.c gcov-iov.h
1171 libgcov.a: libgcc.a; @true
1173 libgcc.a: $(LIBGCC_DEPS)
1175 CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
1176 CONFIG_H="$(TCONFIG_H)" TM_H="$(TM_H)" \
1180 # Use the genmultilib shell script to generate the information the gcc
1181 # driver program needs to select the library directory based on the
1183 multilib.h: s-mlib; @true
1184 s-mlib: $(srcdir)/genmultilib Makefile
1185 if test @enable_multilib@ = yes \
1186 || test -n "$(MULTILIB_OSDIRNAMES)"; then \
1187 $(SHELL) $(srcdir)/genmultilib \
1188 "$(MULTILIB_OPTIONS)" \
1189 "$(MULTILIB_DIRNAMES)" \
1190 "$(MULTILIB_MATCHES)" \
1191 "$(MULTILIB_EXCEPTIONS)" \
1192 "$(MULTILIB_EXTRA_OPTS)" \
1193 "$(MULTILIB_EXCLUSIONS)" \
1194 "$(MULTILIB_OSDIRNAMES)" \
1195 "@enable_multilib@" \
1198 $(SHELL) $(srcdir)/genmultilib '' '' '' '' '' '' '' no \
1201 $(SHELL) $(srcdir)/move-if-change tmp-mlib.h multilib.h
1204 # Build multiple copies of libgcc.a, one for each target switch.
1205 stmp-multilib: $(LIBGCC_DEPS)
1207 CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
1208 CONFIG_H="$(CONFIG_H)" \
1211 $(STAMP) stmp-multilib
1213 # Compile two additional files that are linked with every program
1214 # linked using GCC on systems using COFF or ELF, for the sake of C++
1216 $(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
1217 gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H)
1218 $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) \
1219 @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_BEGIN \
1220 -o $(T)crtbegin$(objext)
1222 $(T)crtend.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
1223 gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H)
1224 $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) \
1225 @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_END \
1226 -o $(T)crtend$(objext)
1228 # These are versions of crtbegin and crtend for shared libraries.
1229 $(T)crtbeginS.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
1230 gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H)
1231 $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS_S) \
1232 @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_BEGIN -DCRTSTUFFS_O \
1233 -o $(T)crtbeginS$(objext)
1235 $(T)crtendS.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
1236 gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H)
1237 $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS_S) \
1238 @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_END -DCRTSTUFFS_O \
1239 -o $(T)crtendS$(objext)
1241 # This is a version of crtbegin for -static links.
1242 $(T)crtbeginT.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
1243 gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H)
1244 $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) \
1245 @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_BEGIN -DCRTSTUFFT_O \
1246 -o $(T)crtbeginT$(objext)
1248 # Compile the start modules crt0.o and mcrt0.o that are linked with
1250 crt0.o: s-crt0 ; @true
1251 mcrt0.o: s-crt0; @true
1253 s-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H)
1254 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
1255 -o crt0.o -c $(CRT0_S)
1256 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
1257 -o mcrt0.o -c $(MCRT0_S)
1260 # Compiling object files from source files.
1262 # Note that dependencies on obstack.h are not written
1263 # because that file is not part of GCC.
1265 # C language specific files.
1267 c-errors.o: c-errors.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1268 $(C_TREE_H) flags.h $(DIAGNOSTIC_H) $(TM_P_H)
1269 c-parse.o : c-parse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1270 $(GGC_H) intl.h $(C_TREE_H) input.h flags.h toplev.h output.h $(CPPLIB_H) \
1271 varray.h gt-c-parse.h
1273 srcextra: c-parse.y c-parse.c gengtype-lex.c gengtype-yacc.c gengtype-yacc.h
1276 c-parse.c: c-parse.y
1277 -$(BISON) $(BISONFLAGS) -o $@ $<
1279 c-parse.y: c-parse.in
1280 echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1281 sed -e "/^@@ifobjc.*/,/^@@end_ifobjc.*/d" \
1282 -e "/^@@ifc.*/d" -e "/^@@end_ifc.*/d" $< >>tmp-c-parse.y
1283 $(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $@
1285 c-incpath.o: c-incpath.c c-incpath.h $(CONFIG_H) $(SYSTEM_H) $(CPPLIB_H) \
1286 intl.h prefix.h coretypes.h $(TM_H) cppdefault.h
1288 c-decl.o : c-decl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1289 $(RTL_H) $(C_TREE_H) $(GGC_H) $(TARGET_H) flags.h function.h output.h \
1290 $(EXPR_H) debug.h toplev.h intl.h $(TM_P_H) tree-inline.h $(TIMEVAR_H) \
1291 opts.h c-pragma.h gt-c-decl.h cgraph.h $(HASHTAB_H) libfuncs.h except.h \
1293 c-typeck.o : c-typeck.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(C_TREE_H) \
1294 $(TARGET_H) flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h $(TM_P_H)
1295 c-lang.o : c-lang.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1296 $(C_TREE_H) $(C_PRETTY_PRINT_H) $(DIAGNOSTIC_H) \
1297 $(GGC_H) langhooks.h $(LANGHOOKS_DEF_H) $(C_COMMON_H) gtype-c.h
1298 stub-objc.o : stub-objc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TREE_H) \
1299 $(GGC_H) $(C_COMMON_H)
1300 c-lex.o : c-lex.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1301 $(RTL_H) debug.h $(C_TREE_H) $(C_COMMON_H) real.h c-incpath.h cppdefault.h \
1302 c-pragma.h input.h intl.h flags.h toplev.h output.h \
1303 $(CPPLIB_H) $(EXPR_H) $(TM_P_H)
1304 c-ppoutput.o : c-ppoutput.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1305 $(C_COMMON_H) $(TREE_H) $(CPPLIB_H) cpphash.h $(TM_P_H) c-pragma.h
1306 c-objc-common.o : c-objc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1307 $(C_TREE_H) $(RTL_H) insn-config.h $(INTEGRATE_H) $(EXPR_H) $(C_TREE_H) \
1308 flags.h toplev.h tree-inline.h $(DIAGNOSTIC_H) $(VARRAY_H) \
1309 langhooks.h $(GGC_H) $(TARGET_H) cgraph.h
1310 c-aux-info.o : c-aux-info.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1311 $(C_TREE_H) flags.h toplev.h
1312 c-convert.o : c-convert.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1313 flags.h toplev.h $(C_COMMON_H) real.h
1314 c-pragma.o: c-pragma.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1315 function.h c-pragma.h toplev.h output.h $(GGC_H) $(TM_P_H) $(C_COMMON_H) gt-c-pragma.h
1316 graph.o: graph.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h flags.h output.h \
1317 $(RTL_H) function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
1318 sbitmap.o: sbitmap.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1319 hard-reg-set.h $(BASIC_BLOCK_H)
1321 COLLECT2_OBJS = collect2.o tlink.o intl.o version.o
1322 COLLECT2_LIBS = @COLLECT2_LIBS@
1323 collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
1324 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1325 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o T$@ \
1326 $(COLLECT2_OBJS) $(LIBS) $(COLLECT2_LIBS)
1329 collect2.o : collect2.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) gstab.h intl.h \
1330 $(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h
1331 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1332 -DTARGET_MACHINE=\"$(target_noncanonical)\" \
1333 -c $(srcdir)/collect2.c $(OUTPUT_OPTION)
1335 tlink.o: tlink.c $(DEMANGLE_H) $(HASHTAB_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1336 $(OBSTACK_H) collect2.h intl.h
1338 # A file used by all variants of C.
1340 c-common.o : c-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1341 $(OBSTACK_H) $(C_COMMON_H) flags.h toplev.h output.h c-pragma.h intl.h \
1342 $(GGC_H) $(EXPR_H) $(TM_P_H) builtin-types.def builtin-attrs.def \
1343 $(DIAGNOSTIC_H) gt-c-common.h langhooks.h varray.h $(RTL_H) \
1344 $(TARGET_H) $(C_TREE_H)
1345 c-pretty-print.o : c-pretty-print.c $(C_PRETTY_PRINT_H) \
1346 $(C_COMMON_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) real.h
1348 c-opts.o : c-opts.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1349 c-pragma.h flags.h toplev.h langhooks.h tree-inline.h $(DIAGNOSTIC_H) \
1350 intl.h debug.h $(C_COMMON_H) opts.h options.h $(PARAMS_H)
1351 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1352 $< $(OUTPUT_OPTION) @TARGET_SYSTEM_ROOT_DEFINE@
1354 c-cppbuiltin.o : c-cppbuiltin.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1355 $(TREE_H) $(C_COMMON_H) c-pragma.h flags.h toplev.h langhooks.h \
1356 output.h except.h real.h $(TM_P_H)
1358 # A file used by all variants of C and some other languages.
1360 attribs.o : attribs.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) flags.h \
1361 toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) $(EXPR_H) $(TM_P_H) \
1362 builtin-types.def $(TARGET_H) langhooks.h
1364 c-format.o : c-format.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) langhooks.h \
1365 $(C_COMMON_H) flags.h toplev.h intl.h $(DIAGNOSTIC_H)
1367 c-semantics.o : c-semantics.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1368 $(C_TREE_H) flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
1369 $(EXPR_H) $(PREDICT_H) tree-inline.h
1371 c-dump.o : c-dump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1372 $(C_TREE_H) tree-dump.h
1374 c-pch.o : c-pch.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(CPPLIB_H) $(TREE_H) \
1375 $(C_COMMON_H) output.h toplev.h c-pragma.h $(GGC_H) debug.h \
1376 langhooks.h flags.h hosthooks.h version.h $(TARGET_H)
1377 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1378 -DHOST_MACHINE=\"$(host)\" -DTARGET_MACHINE=\"$(target)\" \
1381 # Language-independent files.
1384 -DSTANDARD_STARTFILE_PREFIX=\"$(unlibsubdir)/\" \
1385 -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc/\" \
1386 -DSTANDARD_LIBEXEC_PREFIX=\"$(libexecdir)/gcc/\" \
1387 -DDEFAULT_TARGET_VERSION=\"$(version)\" \
1388 -DDEFAULT_TARGET_MACHINE=\"$(target_noncanonical)\" \
1389 -DSTANDARD_BINDIR_PREFIX=\"$(bindir)/\" \
1390 -DTOOLDIR_BASE_PREFIX=\"$(unlibsubdir)/../\" \
1391 @TARGET_SYSTEM_ROOT_DEFINE@ \
1392 $(VALGRIND_DRIVER_DEFINES) \
1393 `test "X$${SHLIB_LINK}" = "X" || test "@enable_shared@" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` \
1394 `test "X$${SHLIB_MULTILIB}" = "X" || echo "-DNO_SHARED_LIBGCC_MULTILIB"`
1396 gcc.o: gcc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) intl.h multilib.h \
1397 Makefile $(lang_specs_files) specs.h prefix.h $(GCC_H)
1398 (SHLIB_LINK='$(SHLIB_LINK)' \
1399 SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
1400 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1402 -c $(srcdir)/gcc.c $(OUTPUT_OPTION))
1404 gccspec.o: gccspec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GCC_H)
1405 (SHLIB_LINK='$(SHLIB_LINK)' \
1406 SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
1407 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1409 -c $(srcdir)/gccspec.c $(OUTPUT_OPTION))
1411 cppspec.o: cppspec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GCC_H)
1413 tree-check.h: s-check ; @true
1414 s-check : gencheck$(build_exeext) $(srcdir)/move-if-change
1415 $(RUN_GEN) ./gencheck$(build_exeext) > tmp-check.h
1416 $(SHELL) $(srcdir)/move-if-change tmp-check.h tree-check.h
1419 gencheck$(build_exeext) : gencheck.o $(BUILD_LIBDEPS)
1420 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
1421 gencheck.o $(BUILD_LIBS)
1423 gencheck.o : gencheck.c gencheck.h tree.def $(BCONFIG_H) $(SYSTEM_H) \
1424 coretypes.h $(GTM_H) $(lang_tree_files)
1426 gencheck.h : s-gencheck ; @true
1427 s-gencheck : Makefile
1428 ltf="$(lang_tree_files)"; for f in $$ltf; do \
1429 echo "#include \"$$f\""; \
1430 done | sed 's|$(srcdir)/||' > tmp-gencheck.h
1431 $(SHELL) $(srcdir)/move-if-change tmp-gencheck.h gencheck.h
1434 specs.h : s-specs ; @true
1436 lsf="$(lang_specs_files)"; for f in $$lsf; do \
1437 echo "#include \"$$f\""; \
1438 done | sed 's|$(srcdir)/||' > tmp-specs.h
1439 $(SHELL) $(srcdir)/move-if-change tmp-specs.h specs.h
1442 options.c: $(lang_opt_files) $(srcdir)/opts.sh options.h intl.h
1444 options.h: $(lang_opt_files) $(srcdir)/opts.sh Makefile
1445 AWK=$(AWK) $(SHELL) $(srcdir)/opts.sh \
1446 '$(SHELL) $(srcdir)/move-if-change' \
1447 options.c options.h $(lang_opt_files)
1449 dumpvers: dumpvers.c
1451 version.o: version.c version.h
1453 gtype-desc.o: gtype-desc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) varray.h \
1454 $(HASHTAB_H) $(TREE_H) $(RTL_H) function.h insn-config.h $(EXPR_H) $(OPTABS_H) \
1455 libfuncs.h debug.h $(GGC_H) bitmap.h $(BASIC_BLOCK_H) hard-reg-set.h \
1456 cselib.h insn-addr.h
1458 ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GGC_H) \
1459 $(HASHTAB_H) toplev.h $(PARAMS_H) hosthooks.h
1461 ggc-page.o: ggc-page.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1462 flags.h toplev.h $(GGC_H) $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H)
1464 ggc-zone.o: ggc-zone.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1465 flags.h toplev.h $(GGC_H) $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H)
1467 stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1468 $(TREE_H) $(GGC_H) gt-stringpool.h
1470 ggc-none.o: ggc-none.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(GGC_H)
1471 $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
1473 prefix.o: prefix.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) Makefile prefix.h
1474 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1475 -DPREFIX=\"$(prefix)\" \
1476 -c $(srcdir)/prefix.c $(OUTPUT_OPTION)
1478 convert.o: convert.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) flags.h \
1479 convert.h toplev.h langhooks.h
1481 langhooks.o : langhooks.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) toplev.h \
1482 tree-inline.h $(RTL_H) insn-config.h $(INTEGRATE_H) langhooks.h \
1483 $(LANGHOOKS_DEF_H) flags.h $(GGC_H) gt-langhooks.h diagnostic.h
1484 tree.o : tree.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) flags.h function.h \
1485 toplev.h $(GGC_H) $(HASHTAB_H) $(TARGET_H) output.h $(TM_P_H) langhooks.h \
1487 tree-dump.o: tree-dump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1488 $(C_TREE_H) flags.h langhooks.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
1489 $(EXPR_H) $(SPLAY_TREE_H) tree-dump.h
1490 tree-inline.o : tree-inline.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1491 $(TREE_H) $(RTL_H) $(EXPR_H) flags.h $(PARAMS_H) input.h insn-config.h \
1492 $(INTEGRATE_H) $(VARRAY_H) $(HASHTAB_H) $(SPLAY_TREE_H) toplev.h \
1493 langhooks.h $(C_COMMON_H) tree-inline.h cgraph.h intl.h
1494 tree-optimize.o : tree-optimize.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1495 $(TREE_H) toplev.h langhooks.h cgraph.h $(TIMEVAR_H) function.h $(GGC_H)
1497 print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1498 $(GGC_H) langhooks.h real.h
1499 stor-layout.o : stor-layout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1500 flags.h function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H) $(TM_P_H) $(TARGET_H) \
1502 fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1503 $(TREE_H) flags.h real.h toplev.h $(HASHTAB_H) $(EXPR_H) $(RTL_H) $(GGC_H) \
1504 $(TM_P_H) langhooks.h $(MD5_H)
1505 diagnostic.o : diagnostic.c $(DIAGNOSTIC_H) real.h \
1506 $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(TM_P_H) flags.h $(GGC_H) \
1507 input.h toplev.h intl.h langhooks.h $(LANGHOOKS_DEF_H)
1508 opts.o : opts.c opts.h options.h toplev.h $(CONFIG_H) $(SYSTEM_H) \
1509 coretypes.h $(TREE_H) $(TM_H) langhooks.h $(GGC_H) $(RTL_H) \
1510 output.h $(DIAGNOSTIC_H) $(TM_P_H) $(INSN_ATTR_H) intl.h
1511 targhooks.o : targhooks.c targhooks.h $(CONFIG_H) $(SYSTEM_H) \
1512 coretypes.h $(TREE_H) $(TM_H) $(RTL_H) $(TM_P_H) function.h \
1515 toplev.o : toplev.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
1516 function.h flags.h xcoffout.h input.h $(INSN_ATTR_H) output.h $(DIAGNOSTIC_H) \
1517 debug.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h \
1518 dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
1519 graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) value-prof.h \
1520 $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) \
1521 langhooks.h insn-flags.h cfglayout.h real.h cfgloop.h \
1522 hosthooks.h $(LANGHOOKS_DEF_H) cgraph.h $(COVERAGE_H)
1523 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1524 -DTARGET_NAME=\"$(target_noncanonical)\" \
1525 -c $(srcdir)/toplev.c $(OUTPUT_OPTION)
1526 main.o : main.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h
1528 host-default.o : host-default.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
1529 hosthooks.h hosthooks-def.h
1531 rtl-error.o: rtl-error.c $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(INSN_ATTR_H) \
1532 insn-config.h input.h toplev.h intl.h $(DIAGNOSTIC_H) $(CONFIG_H)
1534 rtl.o : rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) real.h \
1536 $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
1538 print-rtl.o : print-rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1539 $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H) real.h $(TM_P_H)
1540 rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h \
1541 $(RTL_H) hard-reg-set.h $(TM_P_H) insn-config.h $(RECOG_H) real.h flags.h \
1544 errors.o : errors.c $(CONFIG_H) $(SYSTEM_H) errors.h
1545 $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
1547 varasm.o : varasm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
1548 flags.h function.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
1549 output.h c-pragma.h toplev.h xcoffout.h debug.h $(GGC_H) $(TM_P_H) \
1550 $(HASHTAB_H) $(TARGET_H) langhooks.h gt-varasm.h real.h
1551 function.o : function.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1552 flags.h function.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(REGS_H) hard-reg-set.h \
1553 insn-config.h $(RECOG_H) output.h toplev.h except.h $(HASHTAB_H) $(GGC_H) \
1554 $(TM_P_H) langhooks.h gt-function.h $(TARGET_H)
1555 stmt.o : stmt.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \
1556 function.h insn-config.h hard-reg-set.h $(EXPR_H) libfuncs.h except.h \
1557 $(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H) $(TM_P_H) \
1558 langhooks.h $(PREDICT_H) gt-stmt.h $(OPTABS_H) $(TARGET_H)
1559 except.o : except.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1560 $(TREE_H) flags.h except.h function.h $(EXPR_H) libfuncs.h $(INTEGRATE_H) \
1561 langhooks.h insn-config.h hard-reg-set.h $(BASIC_BLOCK_H) output.h \
1562 dwarf2asm.h dwarf2out.h toplev.h $(HASHTAB_H) intl.h $(GGC_H) \
1563 gt-except.h cgraph.h
1564 expr.o : expr.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \
1565 function.h $(REGS_H) $(EXPR_H) $(OPTABS_H) libfuncs.h $(INSN_ATTR_H) insn-config.h \
1566 $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
1567 except.h reload.h $(GGC_H) langhooks.h intl.h $(TM_P_H) real.h $(TARGET_H)
1568 dojump.o : dojump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1569 flags.h function.h $(EXPR_H) $(OPTABS_H) $(INSN_ATTR_H) insn-config.h \
1571 builtins.o : builtins.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H)\
1572 flags.h $(TARGET_H) function.h $(REGS_H) $(EXPR_H) $(OPTABS_H) insn-config.h \
1573 $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
1574 except.h $(TM_P_H) $(PREDICT_H) libfuncs.h real.h langhooks.h
1575 calls.o : calls.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \
1576 $(EXPR_H) $(OPTABS_H) langhooks.h $(TARGET_H) \
1577 libfuncs.h $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H) $(TM_P_H) cgraph.h except.h
1578 expmed.o : expmed.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1579 flags.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) real.h \
1580 toplev.h $(TM_P_H) langhooks.h
1581 explow.o : explow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1582 flags.h hard-reg-set.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) \
1583 toplev.h function.h $(GGC_H) $(TM_P_H) langhooks.h gt-explow.h
1584 optabs.o : optabs.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1585 flags.h insn-config.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(RECOG_H) reload.h \
1586 toplev.h $(GGC_H) real.h $(TM_P_H) except.h gt-optabs.h $(BASIC_BLOCK_H) \
1588 dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
1589 flags.h $(REGS_H) debug.h $(TM_P_H) $(TARGET_H) function.h langhooks.h \
1590 insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h \
1591 $(GGC_H) gt-dbxout.h
1592 debug.o : debug.c debug.h $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H)
1593 sdbout.o : sdbout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
1594 flags.h function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) real.h \
1595 insn-config.h xcoffout.h c-pragma.h $(GGC_H) $(TARGET_H) \
1596 sdbout.h toplev.h $(TM_P_H) except.h debug.h langhooks.h gt-sdbout.h
1597 dwarf2out.o : dwarf2out.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1598 $(TREE_H) $(RTL_H) dwarf2.h debug.h flags.h insn-config.h reload.h \
1599 output.h $(DIAGNOSTIC_H) real.h hard-reg-set.h $(REGS_H) $(EXPR_H) \
1600 libfuncs.h toplev.h dwarf2out.h varray.h $(GGC_H) except.h dwarf2asm.h \
1601 $(TM_P_H) langhooks.h $(HASHTAB_H) gt-dwarf2out.h $(TARGET_H) cgraph.h \
1603 dwarf2asm.o : dwarf2asm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) flags.h $(RTL_H) \
1604 $(TREE_H) output.h dwarf2asm.h $(TM_P_H) $(GGC_H) gt-dwarf2asm.h
1605 vmsdbgout.o : vmsdbgout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1606 $(RTL_H) flags.h output.h vmsdbg.h debug.h langhooks.h function.h $(TARGET_H)
1607 xcoffout.o : xcoffout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
1608 xcoffout.h flags.h toplev.h output.h dbxout.h $(GGC_H) $(TARGET_H)
1609 emit-rtl.o : emit-rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1610 flags.h function.h $(REGS_H) insn-config.h $(RECOG_H) real.h $(GGC_H) \
1611 $(EXPR_H) $(OBSTACK_H) hard-reg-set.h bitmap.h toplev.h \
1612 $(HASHTAB_H) $(TM_P_H) debug.h langhooks.h gt-emit-rtl.h
1613 real.o : real.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) toplev.h $(TM_P_H)
1614 integrate.o : integrate.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1615 flags.h debug.h $(INTEGRATE_H) insn-config.h $(EXPR_H) real.h $(REGS_H) \
1616 intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H) \
1617 $(PARAMS_H) $(TM_P_H) $(TARGET_H) langhooks.h gt-integrate.h
1618 jump.o : jump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1619 hard-reg-set.h $(REGS_H) insn-config.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
1620 toplev.h $(INSN_ATTR_H) $(TM_P_H) reload.h $(PREDICT_H) $(TIMEVAR_H) \
1623 simplify-rtx.o : simplify-rtx.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1624 $(REGS_H) hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
1625 output.h function.h $(GGC_H) $(OBSTACK_H) $(TM_P_H) $(TREE_H) $(TARGET_H)
1626 cgraph.o : cgraph.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1627 langhooks.h toplev.h flags.h $(GGC_H) $(TARGET_H) cgraph.h gt-cgraph.h \
1629 cgraphunit.o : cgraphunit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
1630 langhooks.h tree-inline.h toplev.h flags.h $(GGC_H) $(TARGET_H) cgraph.h intl.h
1631 coverage.o : coverage.c gcov-io.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
1632 $(TM_H) $(RTL_H) $(TREE_H) flags.h output.h $(REGS_H) $(EXPR_H) function.h \
1633 toplev.h $(GGC_H) $(TARGET_H) langhooks.h $(COVERAGE_H) libfuncs.h \
1634 gt-coverage.h $(HASHTAB_H)
1635 cselib.o : cselib.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
1636 hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
1637 output.h function.h cselib.h $(GGC_H) $(TM_P_H) gt-cselib.h $(PARAMS_H) \
1639 cse.o : cse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
1640 hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
1641 output.h function.h $(BASIC_BLOCK_H) $(GGC_H) $(TM_P_H) $(TIMEVAR_H) \
1642 except.h $(TARGET_H) $(PARAMS_H)
1643 web.o : web.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
1644 hard-reg-set.h flags.h $(BASIC_BLOCK_H) function.h output.h toplev.h df.h
1645 gcse.o : gcse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
1646 hard-reg-set.h flags.h real.h insn-config.h $(GGC_H) $(RECOG_H) $(EXPR_H) \
1647 $(BASIC_BLOCK_H) function.h output.h toplev.h $(TM_P_H) $(PARAMS_H) \
1648 except.h gt-gcse.h $(TREE_H) cselib.h
1649 sibcall.o : sibcall.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
1650 function.h hard-reg-set.h flags.h insn-config.h $(RECOG_H) $(BASIC_BLOCK_H)
1651 resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h $(SYSTEM_H) coretypes.h \
1652 $(TM_H) $(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h \
1653 $(INSN_ATTR_H) except.h $(PARAMS_H) $(TM_P_H)
1654 lcm.o : lcm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
1655 hard-reg-set.h flags.h real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) \
1656 $(BASIC_BLOCK_H) $(TM_P_H) df.h function.h
1657 df.o : df.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1658 insn-config.h $(RECOG_H) function.h $(REGS_H) alloc-pool.h hard-reg-set.h \
1659 $(BASIC_BLOCK_H) df.h $(FIBHEAP_H)
1660 conflict.o : conflict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(OBSTACK_H) \
1661 $(HASHTAB_H) $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H)
1662 profile.o : profile.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1663 $(TREE_H) flags.h output.h $(REGS_H) $(EXPR_H) function.h \
1664 toplev.h $(BASIC_BLOCK_H) $(COVERAGE_H) $(TREE_H) value-prof.h
1665 value-prof.o : value-prof.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1666 $(BASIC_BLOCK_H) hard-reg-set.h value-prof.h $(EXPR_H) output.h flags.h \
1667 $(RECOG_H) insn-config.h $(OPTABS_H) $(REGS_H)
1668 loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h $(LOOP_H) \
1669 insn-config.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) \
1670 real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h cfgloop.h \
1671 toplev.h varray.h except.h cselib.h $(OPTABS_H) $(TM_P_H) $(GGC_H)
1672 doloop.o : doloop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1673 $(LOOP_H) $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) toplev.h \
1675 unroll.o : unroll.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) insn-config.h \
1676 function.h $(INTEGRATE_H) $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) $(LOOP_H) toplev.h \
1677 hard-reg-set.h varray.h $(BASIC_BLOCK_H) $(TM_P_H) $(PREDICT_H) $(PARAMS_H) \
1679 alloc-pool.o : alloc-pool.c $(CONFIG_H) $(SYSTEM_H) alloc-pool.h
1680 flow.o : flow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1681 flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
1682 $(RECOG_H) function.h except.h $(EXPR_H) $(GGC_H) $(TM_P_H)
1683 cfg.o : cfg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h insn-config.h \
1684 $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
1685 function.h except.h $(GGC_H) $(TM_P_H) alloc-pool.h
1686 cfghooks.o: cfghooks.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1687 $(BASIC_BLOCK_H) cfglayout.h
1688 cfgrtl.o : cfgrtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1689 insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
1690 function.h except.h $(GGC_H) $(TM_P_H) insn-config.h $(EXPR_H)
1691 cfganal.o : cfganal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1692 $(BASIC_BLOCK_H) hard-reg-set.h insn-config.h $(RECOG_H) $(GGC_H) $(TM_P_H)
1693 cfgbuild.o : cfgbuild.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1694 insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
1695 function.h except.h $(GGC_H)
1696 cfgcleanup.o : cfgcleanup.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1697 $(RTL_H) $(TIMEVAR_H) $(BASIC_BLOCK_H) hard-reg-set.h output.h flags.h \
1698 $(RECOG_H) toplev.h $(GGC_H) insn-config.h cselib.h $(TARGET_H) $(TM_P_H) \
1700 cfgloop.o : cfgloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) coretypes.h $(TM_H) \
1701 $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h flags.h
1702 cfgloopanal.o : cfgloopanal.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
1703 $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h $(EXPR_H) coretypes.h $(TM_H)
1704 cfgloopmanip.o : cfgloopmanip.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
1705 $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h output.h coretypes.h $(TM_H)
1706 loop-init.o : loop-init.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
1707 $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h \
1709 loop-unswitch.o : loop-unswitch.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TM_H) \
1710 $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h $(PARAMS_H) \
1711 output.h $(EXPR_H) coretypes.h $(TM_H)
1712 loop-unroll.o: loop-unroll.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TM_H) \
1713 $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h $(PARAMS_H) \
1714 output.h $(EXPR_H) coretypes.h $(TM_H)
1715 dominance.o : dominance.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1716 hard-reg-set.h $(BASIC_BLOCK_H) et-forest.h
1717 et-forest.o : et-forest.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) et-forest.h alloc-pool.h
1718 combine.o : combine.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1719 function.h insn-config.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
1720 $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h $(TM_P_H) $(TREE_H) $(TARGET_H)
1721 regclass.o : regclass.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1722 hard-reg-set.h flags.h $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h \
1723 real.h toplev.h function.h output.h $(GGC_H) $(TM_P_H) $(EXPR_H) $(TIMEVAR_H)
1724 local-alloc.o : local-alloc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1725 flags.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
1726 output.h function.h $(INSN_ATTR_H) toplev.h except.h $(TM_P_H)
1727 bitmap.o : bitmap.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) flags.h \
1728 $(BASIC_BLOCK_H) $(REGS_H) $(GGC_H)
1729 $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
1730 global.o : global.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1731 reload.h function.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h \
1733 varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) varray.h $(GGC_H) errors.h \
1735 ra.o : ra.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TM_P_H) insn-config.h \
1736 $(RECOG_H) $(INTEGRATE_H) function.h $(REGS_H) $(OBSTACK_H) hard-reg-set.h \
1737 $(BASIC_BLOCK_H) df.h $(EXPR_H) output.h toplev.h flags.h reload.h ra.h
1738 ra-build.o : ra-build.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TM_P_H) \
1739 insn-config.h $(RECOG_H) function.h $(REGS_H) hard-reg-set.h \
1740 $(BASIC_BLOCK_H) df.h output.h $(GGC_H) ra.h gt-ra-build.h reload.h
1741 ra-colorize.o : ra-colorize.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1742 $(TM_P_H) function.h $(REGS_H) hard-reg-set.h $(BASIC_BLOCK_H) df.h output.h ra.h
1743 ra-debug.o : ra-debug.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1744 insn-config.h $(RECOG_H) function.h hard-reg-set.h $(BASIC_BLOCK_H) df.h output.h \
1746 ra-rewrite.o : ra-rewrite.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1747 $(TM_P_H) function.h $(REGS_H) hard-reg-set.h $(BASIC_BLOCK_H) df.h $(EXPR_H) \
1748 output.h except.h ra.h reload.h insn-config.h
1749 reload.o : reload.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h output.h \
1750 $(EXPR_H) $(OPTABS_H) reload.h $(RECOG_H) hard-reg-set.h insn-config.h \
1751 $(REGS_H) function.h real.h toplev.h $(TM_P_H) $(PARAMS_H)
1752 reload1.o : reload1.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) real.h flags.h \
1753 $(EXPR_H) $(OPTABS_H) reload.h $(REGS_H) hard-reg-set.h insn-config.h \
1754 $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h $(TM_P_H) \
1756 postreload.o : postreload.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) real.h flags.h \
1757 $(EXPR_H) $(OPTABS_H) reload.h $(REGS_H) hard-reg-set.h insn-config.h \
1758 $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h cselib.h $(TM_P_H) \
1760 caller-save.o : caller-save.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1761 flags.h $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
1762 $(RECOG_H) reload.h $(EXPR_H) toplev.h $(TM_P_H)
1763 bt-load.o : bt-load.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1764 $(BASIC_BLOCK_H) $(RTL_H) hard-reg-set.h $(REGS_H) $(OBSTACK_H) $(TM_P_H) \
1765 $(FIBHEAP_H) output.h $(TARGET_H) $(EXPR_H) flags.h $(INSN_ATTR_H)
1766 reorg.o : reorg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) conditions.h \
1767 hard-reg-set.h $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) except.h \
1768 $(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h $(PARAMS_H) $(TM_P_H)
1769 alias.o : alias.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
1770 hard-reg-set.h $(BASIC_BLOCK_H) $(REGS_H) toplev.h output.h $(EXPR_H) \
1771 $(GGC_H) function.h cselib.h $(TREE_H) $(TM_P_H) langhooks.h $(TARGET_H) \
1772 gt-alias.h $(TIMEVAR_H) cgraph.h
1773 regmove.o : regmove.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) insn-config.h \
1774 $(RECOG_H) output.h $(REGS_H) hard-reg-set.h flags.h function.h \
1775 $(EXPR_H) $(BASIC_BLOCK_H) toplev.h $(TM_P_H) except.h reload.h
1776 haifa-sched.o : haifa-sched.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1777 sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
1778 $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(TARGET_H)
1779 sched-deps.o : sched-deps.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1780 sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
1781 $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h cselib.h $(PARAMS_H) $(TM_P_H)
1782 sched-rgn.o : sched-rgn.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1783 sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
1784 $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(TARGET_H)
1785 sched-ebb.o : sched-ebb.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1786 sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
1787 $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(PARAMS_H)
1788 sched-vis.o : sched-vis.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1789 sched-int.h hard-reg-set.h $(BASIC_BLOCK_H) $(INSN_ATTR_H) $(REGS_H) $(TM_P_H) \
1791 final.o : final.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1792 flags.h intl.h $(REGS_H) $(RECOG_H) conditions.h insn-config.h $(INSN_ATTR_H) \
1793 function.h real.h output.h hard-reg-set.h except.h debug.h xcoffout.h \
1794 toplev.h reload.h dwarf2out.h $(BASIC_BLOCK_H) $(TM_P_H) $(TARGET_H) \
1796 recog.o : recog.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) function.h \
1797 $(BASIC_BLOCK_H) $(REGS_H) $(RECOG_H) $(EXPR_H) hard-reg-set.h flags.h insn-config.h \
1798 $(INSN_ATTR_H) real.h toplev.h output.h reload.h $(TM_P_H)
1799 reg-stack.o : reg-stack.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1800 $(RECOG_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h toplev.h reload.h \
1801 varray.h function.h $(TM_P_H) $(GGC_H) gt-reg-stack.h
1802 sreal.o: sreal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) sreal.h
1803 predict.o: predict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1804 flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
1805 $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H) $(PREDICT_H) sreal.h \
1806 $(PARAMS_H) $(TARGET_H) cfgloop.h $(COVERAGE_H)
1807 lists.o: lists.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h $(RTL_H) $(GGC_H)
1808 bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1809 $(RTL_H) $(BASIC_BLOCK_H) flags.h timevar.h output.h cfglayout.h $(FIBHEAP_H) \
1811 tracer.o : tracer.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
1812 $(BASIC_BLOCK_H) hard-reg-set.h output.h cfglayout.h flags.h timevar.h \
1813 $(PARAMS_H) $(COVERAGE_H)
1814 cfglayout.o : cfglayout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1815 $(RTL_H) $(TREE_H) insn-config.h $(BASIC_BLOCK_H) hard-reg-set.h output.h \
1816 function.h cfglayout.h cfgloop.h $(TARGET_H) gt-cfglayout.h $(GGC_H)
1817 timevar.o : timevar.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TIMEVAR_H) flags.h \
1819 regrename.o : regrename.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1820 insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \
1821 resource.h $(OBSTACK_H) flags.h $(TM_P_H)
1822 ifcvt.o : ifcvt.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
1823 $(REGS_H) toplev.h flags.h insn-config.h function.h $(RECOG_H) $(TARGET_H) \
1824 $(BASIC_BLOCK_H) $(EXPR_H) output.h except.h $(TM_P_H) real.h $(OPTABS_H) \
1826 params.o : params.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(PARAMS_H) toplev.h
1827 hooks.o: hooks.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(HOOKS_H)
1828 pretty-print.o: $(CONFIG_H) $(SYSTEM_H) pretty-print.c $(PRETTY_PRINT_H)
1830 $(out_object_file): $(out_file) $(CONFIG_H) coretypes.h $(TM_H) $(TREE_H) $(GGC_H) \
1831 $(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
1832 output.h $(INSN_ATTR_H) $(SYSTEM_H) toplev.h $(TARGET_H) libfuncs.h \
1833 $(TARGET_DEF_H) function.h sched-int.h $(TM_P_H) $(EXPR_H) $(OPTABS_H) \
1835 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1836 $(out_file) $(OUTPUT_OPTION)
1838 # Build auxiliary files that support ecoff format.
1839 mips-tfile: mips-tfile.o version.o $(LIBDEPS)
1840 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
1842 mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) coretypes.h $(TM_H) version.h
1844 mips-tdump: mips-tdump.o version.o $(LIBDEPS)
1845 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
1847 mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) coretypes.h $(TM_H) version.h
1849 # FIXME: writing proper dependencies for this is a *LOT* of work.
1850 libbackend.o : $(OBJS-common:.o=.c) $(out_file) \
1851 insn-config.h insn-flags.h insn-codes.h insn-constants.h \
1853 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1854 -DTARGET_NAME=\"$(target_noncanonical)\" \
1855 -DLOCALEDIR=\"$(localedir)\" \
1856 -c $(filter %.c,$^) -o $@
1859 # Generate header and source files from the machine description,
1862 .PRECIOUS: insn-config.h insn-flags.h insn-codes.h insn-constants.h \
1863 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1864 insn-attr.h insn-attrtab.c
1866 # The following pair of rules has this effect:
1867 # genconfig is run only if the md has changed since genconfig was last run;
1868 # but the file insn-config.h is touched only when its contents actually change.
1870 # Each of the other insn-* files is handled by a similar pair of rules.
1872 # This causes an anomaly in the results of make -n
1873 # because insn-* is older than s-*
1874 # and thus make -n thinks that insn-* will be updated
1875 # and force recompilation of things that depend on it.
1876 # We use move-if-change precisely to avoid such recompilation.
1877 # But there is no way to teach make -n that it will be avoided.
1879 # Each of the insn-*.[ch] rules has a semicolon at the end,
1880 # for otherwise the system Make on SunOS 4.1 never tries
1881 # to recompile insn-*.o. To avoid problems and extra noise from
1882 # versions of make which don't like empty commands (nothing after the
1883 # trailing `;'), we call true for each.
1885 insn-config.h: s-config ; @true
1886 s-config : $(md_file) genconfig$(build_exeext) $(srcdir)/move-if-change
1887 $(RUN_GEN) ./genconfig$(build_exeext) $(md_file) > tmp-config.h
1888 $(SHELL) $(srcdir)/move-if-change tmp-config.h insn-config.h
1891 insn-conditions.c: s-conditions ; @true
1892 s-conditions : $(md_file) genconditions$(build_exeext) $(srcdir)/move-if-change
1893 $(RUN_GEN) ./genconditions$(build_exeext) $(md_file) > tmp-conditions.c
1894 $(SHELL) $(srcdir)/move-if-change tmp-conditions.c insn-conditions.c
1895 $(STAMP) s-conditions
1897 insn-conditions.o : insn-conditions.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
1898 $(GTM_H) $(RTL_H) $(TM_P_H) $(REGS_H) function.h $(RECOG_H) real.h output.h \
1899 flags.h hard-reg-set.h resource.h toplev.h reload.h gensupport.h \
1901 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) insn-conditions.c
1903 dummy-conditions.o : dummy-conditions.c $(BCONFIG_H) $(SYSTEM_H) \
1904 coretypes.h $(GTM_H) gensupport.h
1906 insn-flags.h: s-flags ; @true
1907 s-flags : $(md_file) genflags$(build_exeext) $(srcdir)/move-if-change
1908 $(RUN_GEN) ./genflags$(build_exeext) $(md_file) > tmp-flags.h
1909 $(SHELL) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1912 insn-codes.h: s-codes ; @true
1913 s-codes : $(md_file) gencodes$(build_exeext) $(srcdir)/move-if-change
1914 $(RUN_GEN) ./gencodes$(build_exeext) $(md_file) > tmp-codes.h
1915 $(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1918 insn-constants.h: s-constants ; @true
1919 s-constants : $(md_file) genconstants$(build_exeext) $(srcdir)/move-if-change
1920 $(RUN_GEN) ./genconstants$(build_exeext) $(md_file) > tmp-constants.h
1921 $(SHELL) $(srcdir)/move-if-change tmp-constants.h insn-constants.h
1922 $(STAMP) s-constants
1924 insn-emit.o : insn-emit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1925 $(RTL_H) $(EXPR_H) real.h output.h insn-config.h $(OPTABS_H) reload.h \
1926 $(RECOG_H) toplev.h function.h flags.h hard-reg-set.h resource.h $(TM_P_H)
1927 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c \
1930 insn-emit.c: s-emit ; @true
1931 s-emit : $(md_file) genemit$(build_exeext) $(srcdir)/move-if-change
1932 $(RUN_GEN) ./genemit$(build_exeext) $(md_file) > tmp-emit.c
1933 $(SHELL) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1936 insn-recog.o : insn-recog.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1937 $(RTL_H) insn-config.h $(RECOG_H) real.h output.h flags.h function.h \
1938 hard-reg-set.h resource.h $(TM_P_H) toplev.h reload.h
1939 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c \
1942 insn-recog.c: s-recog ; @true
1943 s-recog : $(md_file) genrecog$(build_exeext) $(srcdir)/move-if-change
1944 $(RUN_GEN) ./genrecog$(build_exeext) $(md_file) > tmp-recog.c
1945 $(SHELL) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1948 insn-opinit.o : insn-opinit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1949 $(RTL_H) insn-config.h flags.h $(RECOG_H) $(EXPR_H) $(OPTABS_H) reload.h
1950 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c \
1953 insn-opinit.c: s-opinit ; @true
1954 s-opinit : $(md_file) genopinit$(build_exeext) $(srcdir)/move-if-change
1955 $(RUN_GEN) ./genopinit$(build_exeext) $(md_file) > tmp-opinit.c
1956 $(SHELL) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1959 insn-extract.o : insn-extract.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1960 $(RTL_H) toplev.h insn-config.h $(RECOG_H)
1961 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c \
1964 insn-extract.c: s-extract ; @true
1965 s-extract : $(md_file) genextract$(build_exeext) $(srcdir)/move-if-change
1966 $(RUN_GEN) ./genextract$(build_exeext) $(md_file) > tmp-extract.c
1967 $(SHELL) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1970 insn-peep.o : insn-peep.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1971 $(RTL_H) $(REGS_H) output.h real.h insn-config.h $(RECOG_H) except.h \
1972 function.h $(TM_P_H)
1973 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c \
1976 insn-peep.c: s-peep ; @true
1977 s-peep : $(md_file) genpeep$(build_exeext) $(srcdir)/move-if-change
1978 $(RUN_GEN) ./genpeep$(build_exeext) $(md_file) > tmp-peep.c
1979 $(SHELL) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1982 insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
1983 $(RTL_H) $(REGS_H) real.h output.h $(INSN_ATTR_H) insn-config.h toplev.h \
1984 $(RECOG_H) $(TM_P_H) flags.h
1985 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c \
1988 insn-attr.h: s-attr ; @true
1989 s-attr : $(md_file) genattr$(build_exeext) $(srcdir)/move-if-change
1990 $(RUN_GEN) ./genattr$(build_exeext) $(md_file) > tmp-attr.h
1991 $(SHELL) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1994 insn-attrtab.c: s-attrtab ; @true
1995 s-attrtab : $(md_file) genattrtab$(build_exeext) $(srcdir)/move-if-change
1996 $(RUN_GEN) ./genattrtab$(build_exeext) $(md_file) > tmp-attrtab.c
1997 $(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
2000 insn-output.o : insn-output.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
2001 $(RTL_H) $(GGC_H) $(REGS_H) real.h conditions.h hard-reg-set.h \
2002 insn-config.h $(INSN_ATTR_H) $(EXPR_H) output.h $(RECOG_H) function.h \
2003 toplev.h flags.h insn-codes.h $(TM_P_H) $(TARGET_H)
2004 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c \
2007 insn-output.c: s-output ; @true
2008 s-output : $(md_file) genoutput$(build_exeext) $(srcdir)/move-if-change
2009 $(RUN_GEN) ./genoutput$(build_exeext) $(md_file) > tmp-output.c
2010 $(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c
2013 genrtl.o : genrtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
2015 genrtl.c genrtl.h : s-genrtl
2016 @true # force gnu make to recheck modification times.
2018 s-genrtl: gengenrtl$(build_exeext) $(srcdir)/move-if-change
2019 $(RUN_GEN) ./gengenrtl$(build_exeext) -h > tmp-genrtl.h
2020 $(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
2021 $(RUN_GEN) ./gengenrtl$(build_exeext) > tmp-genrtl.c
2022 $(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
2025 insn-modes.o : insn-modes.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
2026 $(MACHMODE_H) real.h
2027 min-insn-modes.c insn-modes.c insn-modes.h : s-modes ; @true
2029 s-modes: genmodes$(build_exeext) $(srcdir)/move-if-change
2030 $(RUN_GEN) ./genmodes$(build_exeext) -h > tmp-modes.h
2031 $(SHELL) $(srcdir)/move-if-change tmp-modes.h insn-modes.h
2032 $(RUN_GEN) ./genmodes$(build_exeext) -m > tmp-min-modes.c
2033 $(SHELL) $(srcdir)/move-if-change tmp-min-modes.c min-insn-modes.c
2034 $(RUN_GEN) ./genmodes$(build_exeext) > tmp-modes.c
2035 $(SHELL) $(srcdir)/move-if-change tmp-modes.c insn-modes.c
2038 tm-preds.h: s-preds; @true
2040 s-preds: genpreds$(build_exeext) $(srcdir)/move-if-change
2041 $(RUN_GEN) ./genpreds$(build_exeext) > tmp-preds.h
2042 $(SHELL) $(srcdir)/move-if-change tmp-preds.h tm-preds.h
2045 GTFILES = $(srcdir)/input.h $(srcdir)/coretypes.h $(srcdir)/cpplib.h \
2046 $(host_xm_file_list) $(tm_file_list) $(HASHTAB_H) $(SPLAY_TREE_H) \
2047 $(srcdir)/bitmap.h $(srcdir)/coverage.c $(srcdir)/function.h $(srcdir)/rtl.h \
2048 $(srcdir)/optabs.h $(srcdir)/tree.h $(srcdir)/libfuncs.h $(srcdir)/hashtable.h \
2049 $(srcdir)/real.h $(srcdir)/varray.h $(srcdir)/insn-addr.h \
2050 $(srcdir)/cselib.h $(srcdir)/basic-block.h $(srcdir)/cgraph.h \
2051 $(srcdir)/c-common.h $(srcdir)/c-tree.h \
2052 $(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c $(srcdir)/cgraph.c \
2053 $(srcdir)/dbxout.c $(srcdir)/dwarf2out.c $(srcdir)/dwarf2asm.c \
2054 $(srcdir)/emit-rtl.c $(srcdir)/except.c $(srcdir)/explow.c $(srcdir)/expr.c \
2055 $(srcdir)/fold-const.c $(srcdir)/function.c \
2056 $(srcdir)/gcse.c $(srcdir)/integrate.c $(srcdir)/lists.c $(srcdir)/optabs.c \
2057 $(srcdir)/profile.c $(srcdir)/ra-build.c $(srcdir)/regclass.c \
2058 $(srcdir)/reg-stack.c $(srcdir)/cfglayout.c $(srcdir)/langhooks.c \
2059 $(srcdir)/sdbout.c $(srcdir)/stmt.c $(srcdir)/stor-layout.c \
2060 $(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
2064 GTFILES_FILES_LANGS = @all_gtfiles_files_langs@
2065 GTFILES_FILES_FILES = @all_gtfiles_files_files@
2066 GTFILES_LANG_DIR_NAMES = @subdirs@
2067 GTFILES_SRCDIR = @srcdir@
2069 gt-cgraph.h gt-coverage.h gtype-desc.h gtype-desc.c gt-except.h \
2070 gt-function.h gt-integrate.h gt-stmt.h gt-tree.h gt-varasm.h \
2071 gt-emit-rtl.h gt-explow.h gt-stor-layout.h gt-regclass.h \
2072 gt-lists.h gt-alias.h gt-cselib.h gt-fold-const.h gt-gcse.h \
2073 gt-expr.h gt-sdbout.h gt-optabs.h gt-bitmap.h \
2074 gt-dwarf2out.h gt-ra-build.h gt-reg-stack.h gt-dwarf2asm.h \
2075 gt-dbxout.h gt-c-common.h gt-c-decl.h gt-c-parse.h \
2076 gt-c-pragma.h gtype-c.h gt-input.h gt-cfglayout.h \
2077 gt-stringpool.h gt-langhooks.h : s-gtype ; @true
2079 gtyp-gen.h: Makefile
2080 echo "/* This file is machine generated. Do not edit. */" > tmp-gtyp.h
2081 echo "static const char *const srcdir = " >> tmp-gtyp.h
2082 echo "\"$(GTFILES_SRCDIR)\"" >> tmp-gtyp.h
2083 echo ";" >> tmp-gtyp.h
2084 echo "static const char *const lang_files[] = {" >> tmp-gtyp.h
2085 ll="$(GTFILES_FILES_FILES)"; \
2087 echo "\"$$f\", "; done >> tmp-gtyp.h
2088 echo "NULL};" >> tmp-gtyp.h
2089 echo "static const char *const langs_for_lang_files[] = {" >> tmp-gtyp.h
2090 ff="$(GTFILES_FILES_LANGS)"; \
2092 echo "\"$$f\", " ; done >> tmp-gtyp.h
2093 echo "NULL};" >> tmp-gtyp.h
2094 echo "static const char *const all_files[] = {" >> tmp-gtyp.h
2097 echo "\"$$f\", "; done >> tmp-gtyp.h
2098 echo " NULL};" >> tmp-gtyp.h
2099 echo "static const char *const lang_dir_names[] = { \"c\", " >> tmp-gtyp.h
2100 gf="$(GTFILES_LANG_DIR_NAMES)"; \
2102 echo "\"$$l\", "; done >> tmp-gtyp.h
2103 echo "NULL};" >> tmp-gtyp.h
2104 $(SHELL) $(srcdir)/move-if-change tmp-gtyp.h gtyp-gen.h
2106 s-gtype: gengtype$(build_exeext) $(GTFILES)
2107 $(RUN_GEN) ./gengtype
2111 # Compile the programs that generate insn-* from the machine description.
2112 # They are compiled with $(CC_FOR_BUILD), and associated libraries,
2113 # since they need to run on this machine
2114 # even if GCC is being compiled to run on some other machine.
2116 # $(CONFIG_H) is omitted from the deps of the gen*.o
2117 # because these programs don't really depend on anything
2118 # about the target machine. They do depend on config.h itself,
2119 # since that describes the host machine.
2121 # The names of programs that run on the "build" machine.
2122 genprognames=genconfig genflags gencodes genemit genopinit genrecog \
2123 genextract genpeep genattr genoutput
2125 # The names of the executable files for those programs.
2126 genprogs=$(genprognames:%=%$(build_exeext))
2128 # Object files used in those programs.
2129 genobjs=$(genprognames:%=%.o) read-rtl.o gensupport.o genattrtab.o \
2130 genautomata.o gengenrtl.o genmodes.o genpreds.o gengtype.o \
2131 genconstants.o gen-protos.o scan.o fix-header.o scan-decls.o \
2132 gencheck.o dummy-conditions.o genconditions.o
2134 $(genprogs): %$(build_exeext): %.o $(BUILD_RTL) $(BUILD_SUPPORT) \
2135 $(BUILD_PRINT) $(BUILD_ERRORS) \
2137 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2138 $< $(BUILD_RTL) $(BUILD_SUPPORT) $(BUILD_PRINT) \
2139 $(BUILD_ERRORS) $(BUILD_LIBS)
2141 $(genobjs): %.o : %.c
2142 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
2144 read-rtl.o: read-rtl.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) \
2145 $(OBSTACK_H) $(HASHTAB_H)
2147 gensupport.o: gensupport.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) \
2148 $(OBSTACK_H) errors.h $(HASHTAB_H) gensupport.h
2150 genconfig.o : genconfig.c $(RTL_H) $(BCONFIG_H) \
2151 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
2153 genflags.o : genflags.c $(RTL_H) $(OBSTACK_H) $(BCONFIG_H) \
2154 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
2156 gencodes.o : gencodes.c $(RTL_H) $(BCONFIG_H) \
2157 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
2159 genconstants$(build_exeext) : genconstants.o $(BUILD_RTL) $(BUILD_EARLY_SUPPORT) \
2160 $(BUILD_ERRORS) $(BUILD_LIBDEPS)
2161 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2162 genconstants.o $(BUILD_EARLY_SUPPORT) $(BUILD_RTL) \
2163 $(BUILD_ERRORS) $(BUILD_LIBS)
2165 genconstants.o : genconstants.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \
2168 genemit.o : genemit.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \
2169 errors.h gensupport.h
2171 genopinit.o : genopinit.c $(RTL_H) $(BCONFIG_H) \
2172 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
2174 genrecog.o : genrecog.c $(RTL_H) $(BCONFIG_H) \
2175 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
2177 genextract.o : genextract.c $(RTL_H) $(BCONFIG_H) \
2178 $(SYSTEM_H) coretypes.h $(GTM_H) insn-config.h errors.h gensupport.h
2180 genpeep.o : genpeep.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \
2181 errors.h gensupport.h
2183 genattr.o : genattr.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) errors.h \
2186 genattrtab$(build_exeext) : genattrtab.o genautomata.o \
2187 $(BUILD_RTL) $(BUILD_SUPPORT) $(BUILD_PRINT) $(BUILD_ERRORS) $(BUILD_VARRAY) \
2189 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2190 genattrtab.o genautomata.o \
2191 $(BUILD_RTL) $(BUILD_SUPPORT) $(BUILD_PRINT) $(BUILD_ERRORS) \
2192 $(BUILD_VARRAY) $(BUILD_LIBS) -lm
2194 genattrtab.o : genattrtab.c $(RTL_H) $(OBSTACK_H) $(BCONFIG_H) \
2195 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h $(GGC_H) gensupport.h genattrtab.h
2197 genautomata.o : genautomata.c $(RTL_H) $(OBSTACK_H) $(BCONFIG_H) \
2198 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h varray.h genattrtab.h $(HASHTAB_H)
2200 genoutput.o : genoutput.c $(RTL_H) $(BCONFIG_H) \
2201 $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
2203 gengenrtl$(build_exeext) : gengenrtl.o $(BUILD_LIBDEPS)
2204 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2205 gengenrtl.o $(BUILD_LIBS)
2207 gengenrtl.o : gengenrtl.c $(BCONFIG_H) $(SYSTEM_H) rtl.def
2209 genmodes$(build_exeext) : genmodes.o $(BUILD_ERRORS) $(BUILD_LIBDEPS)
2210 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2211 genmodes.o $(BUILD_ERRORS) $(BUILD_LIBS)
2213 genmodes.o : genmodes.c $(BCONFIG_H) $(SYSTEM_H) errors.h $(HASHTAB_H) \
2214 machmode.def $(extra_modes_file)
2216 genpreds$(build_exeext) : genpreds.o $(BUILD_LIBDEPS)
2217 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2218 genpreds.o $(BUILD_LIBS)
2220 genpreds.o : genpreds.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H)
2222 gengtype$(build_exeext) : gengtype.o gengtype-lex.o gengtype-yacc.o \
2224 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2225 gengtype.o gengtype-lex.o gengtype-yacc.o $(BUILD_LIBS)
2227 gengtype.o : gengtype.c gengtype.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \
2228 real.h $(RTL_BASE_H) gtyp-gen.h
2230 gengtype-lex.o : gengtype-lex.c gengtype.h gengtype-yacc.h \
2231 $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H)
2232 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
2235 gengtype-yacc.o : gengtype-yacc.c gengtype.h $(BCONFIG_H) $(SYSTEM_H) \
2236 coretypes.h $(GTM_H)
2237 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
2240 gengtype-lex.c : gengtype-lex.l
2241 -$(FLEX) $(FLEXFLAGS) -o$@ $<
2243 gengtype-yacc.c gengtype-yacc.h: gengtype-yacc.y
2244 -$(BISON) $(BISONFLAGS) -d -o gengtype-yacc.c $<
2246 genconditions$(build_exeext) : genconditions.o $(BUILD_EARLY_SUPPORT) \
2247 $(BUILD_RTL) $(BUILD_ERRORS) $(BUILD_LIBDEPS)
2248 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2249 genconditions.o $(BUILD_EARLY_SUPPORT) $(BUILD_RTL) \
2250 $(BUILD_ERRORS) $(BUILD_LIBS)
2252 genconditions.o : genconditions.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
2256 # Compile the libraries to be used by gen*.
2257 # If we are not cross-building, gen* use the same .o's that cc1 will use,
2258 # and BUILD_PREFIX_1 is `loser-', just to ensure these rules don't conflict
2259 # with the rules for rtl.o, etc.
2260 $(BUILD_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) $(RTL_H) \
2261 real.h $(GGC_H) errors.h
2262 rm -f $(BUILD_PREFIX)rtl.c
2263 sed -e 's/config[.]h/bconfig.h/' $(srcdir)/rtl.c > $(BUILD_PREFIX)rtl.c
2264 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)rtl.c $(OUTPUT_OPTION)
2266 print-rtl1.o: $(srcdir)/print-rtl.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
2267 $(GTM_H) $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H)
2269 sed -e 's/config[.]h/bconfig.h/' $(srcdir)/print-rtl.c > print-rtl1.c
2270 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) print-rtl1.c $(OUTPUT_OPTION)
2272 $(BUILD_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) \
2273 $(RTL_H) flags.h $(BASIC_BLOCK_H) $(REGS_H) $(GGC_H)
2274 rm -f $(BUILD_PREFIX)bitmap.c
2275 sed -e 's/config[.]h/bconfig.h/' $(srcdir)/bitmap.c > $(BUILD_PREFIX)bitmap.c
2276 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)bitmap.c $(OUTPUT_OPTION)
2278 $(BUILD_PREFIX_1)errors.o: errors.c $(BCONFIG_H) $(SYSTEM_H) errors.h
2279 rm -f $(BUILD_PREFIX)errors.c
2280 sed -e 's/config[.]h/bconfig.h/' $(srcdir)/errors.c > $(BUILD_PREFIX)errors.c
2281 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)errors.c $(OUTPUT_OPTION)
2283 $(BUILD_PREFIX_1)varray.o: varray.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) varray.h \
2284 $(RTL_H) $(GGC_H) $(TREE_H) bitmap.h errors.h
2285 rm -f $(BUILD_PREFIX)varray.c
2286 sed -e 's/config[.]h/bconfig.h/' $(srcdir)/varray.c > \
2287 $(BUILD_PREFIX)varray.c
2288 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
2289 $(BUILD_PREFIX)varray.c $(OUTPUT_OPTION)
2291 $(BUILD_PREFIX_1)ggc-none.o: ggc-none.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) $(GGC_H)
2292 rm -f $(BUILD_PREFIX)ggc-none.c
2293 sed -e 's/config[.]h/bconfig.h/' $(srcdir)/ggc-none.c > $(BUILD_PREFIX)ggc-none.c
2294 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)ggc-none.c $(OUTPUT_OPTION)
2296 min-insn-modes.o: insn-modes.c $(BCONFIG_H) $(SYSTEM_H) $(MACHMODE_H)
2297 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
2298 min-insn-modes.c $(OUTPUT_OPTION)
2301 # Remake internationalization support.
2302 intl.o: intl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) intl.h Makefile
2303 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
2304 -DLOCALEDIR=\"$(localedir)\" \
2305 -c $(srcdir)/intl.c $(OUTPUT_OPTION)
2307 # Make-lang.in should add dependencies of po-generated on any generated
2308 # files which need to be scanned by gettext (usually Yacc-generated parsers).
2309 po-generated: c-parse.c options.c
2312 # Remake cpp and protoize.
2314 PREPROCESSOR_DEFINES = \
2315 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
2316 -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
2317 -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_noncanonical)\" \
2318 -DGPLUSPLUS_BACKWARD_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/backward\" \
2319 -DLOCAL_INCLUDE_DIR=\"$(local_includedir)\" \
2320 -DCROSS_INCLUDE_DIR=\"$(CROSS_SYSTEM_HEADER_DIR)\" \
2321 -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \
2322 @TARGET_SYSTEM_ROOT_DEFINE@
2324 LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o cpptrad.o \
2325 cpphash.o cpperror.o cppinit.o cppcharset.o \
2326 hashtable.o line-map.o mkdeps.o cpppch.o
2328 LIBCPP_DEPS = $(CPPLIB_H) cpphash.h line-map.h hashtable.h intl.h \
2329 $(OBSTACK_H) $(CONFIG_H) $(SYSTEM_H)
2331 # Most of the other archives built/used by this makefile are for
2332 # targets. This one is strictly for the host.
2333 libcpp.a: $(LIBCPP_OBJS)
2335 $(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS)
2338 cppcharset.o: cppcharset.c $(LIBCPP_DEPS) cppucnid.h
2339 cpperror.o: cpperror.c $(LIBCPP_DEPS)
2340 cppexp.o: cppexp.c $(LIBCPP_DEPS)
2341 cpplex.o: cpplex.c $(LIBCPP_DEPS)
2342 cppmacro.o: cppmacro.c $(LIBCPP_DEPS)
2343 cpplib.o: cpplib.c $(LIBCPP_DEPS)
2344 cpphash.o: cpphash.c $(LIBCPP_DEPS)
2345 cpptrad.o: cpptrad.c $(LIBCPP_DEPS)
2346 cppfiles.o: cppfiles.c $(LIBCPP_DEPS) $(HASHTAB_H) $(MD5_H) mkdeps.h
2347 cppinit.o: cppinit.c $(LIBCPP_DEPS) mkdeps.h
2348 cpppch.o: cpppch.c $(LIBCPP_DEPS) mkdeps.h
2350 cppdefault.o: cppdefault.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
2351 cppdefault.h Makefile
2352 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
2353 $(PREPROCESSOR_DEFINES) \
2354 -c $(srcdir)/cppdefault.c $(OUTPUT_OPTION)
2356 mkdeps.o: mkdeps.c $(CONFIG_H) $(SYSTEM_H) mkdeps.h
2357 hashtable.o: hashtable.c hashtable.h $(CONFIG_H) $(SYSTEM_H) $(OBSTACK_H)
2358 line-map.o: line-map.c line-map.h intl.h $(CONFIG_H) $(SYSTEM_H)
2360 # Note for the stamp targets, we run the program `true' instead of
2361 # having an empty command (nothing following the semicolon).
2363 proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X
2365 PROTO_OBJS = intl.o version.o cppdefault.o
2367 protoize$(exeext): protoize.o $(PROTO_OBJS) $(LIBDEPS)
2368 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ protoize.o $(PROTO_OBJS) $(LIBS)
2370 unprotoize$(exeext): unprotoize.o $(PROTO_OBJS) $(LIBDEPS)
2371 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ unprotoize.o $(PROTO_OBJS) $(LIBS)
2373 protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) $(SYSTEM_H) \
2374 coretypes.h $(TM_H) Makefile version.h
2375 (SHLIB_LINK='$(SHLIB_LINK)' \
2376 SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
2377 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
2379 $(srcdir)/protoize.c $(OUTPUT_OPTION))
2381 unprotoize.o: protoize.c $(srcdir)/../include/getopt.h \
2382 $(CONFIG_H) $(SYSTEM_H) Makefile version.h
2383 (SHLIB_LINK='$(SHLIB_LINK)' \
2384 SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
2385 $(CC) -c -DUNPROTOIZE $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
2387 $(srcdir)/protoize.c $(OUTPUT_OPTION))
2389 # This info describes the target machine, so compile with GCC just built.
2390 SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
2392 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2393 sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
2394 $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
2395 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
2396 -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c
2397 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2400 test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES)
2401 -rm -f tmp-proto.[cso]
2402 cp $(srcdir)/protoize.c tmp-proto.c
2403 chmod u+w tmp-proto.c
2404 ./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \
2405 $(GCC_CFLAGS) $(INCLUDES) \
2406 -DGCC_INCLUDE_DIR=0 \
2407 -DGPLUSPLUS_INCLUDE_DIR=0 \
2408 -DCROSS_INCLUDE_DIR=0 \
2409 -DTOOL_INCLUDE_DIR=0 \
2410 -DSTANDARD_EXEC_PREFIX=0 \
2411 -DDEFAULT_TARGET_MACHINE=0 \
2412 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2413 @echo '**********' Expect 400 lines of differences.
2414 -diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff
2415 -wc -l tmp-proto.diff
2416 ./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \
2417 $(GCC_CFLAGS) $(INCLUDES) \
2418 -DGCC_INCLUDE_DIR=0 \
2419 -DGPLUSPLUS_INCLUDE_DIR=0 \
2420 -DCROSS_INCLUDE_DIR=0 \
2421 -DTOOL_INCLUDE_DIR=0 \
2422 -DSTANDARD_EXEC_PREFIX=0 \
2423 -DDEFAULT_TARGET_MACHINE=0 \
2424 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2425 @echo Expect zero differences.
2426 diff $(srcdir)/protoize.c tmp-proto.c | cat
2427 -rm -f tmp-proto.[cs] tmp-proto$(objext)
2429 # gcov-iov.c is run on the build machine to generate gcov-iov.h from version.c
2430 gcov-iov.o: gcov-iov.c version.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) coretypes.h $(TM_H)
2431 $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(srcdir)/gcov-iov.c $(OUTPUT_OPTION)
2432 gcov-iov$(build_exeext): gcov-iov.o
2433 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) gcov-iov.o -o $@
2435 s-iov: gcov-iov$(build_exeext) $(srcdir)/move-if-change
2436 ./gcov-iov$(build_exeext) > tmp-gcov-iov.h
2437 $(SHELL) $(srcdir)/move-if-change tmp-gcov-iov.h gcov-iov.h
2440 gcov.o: gcov.c gcov-io.h gcov-io.c gcov-iov.h intl.h $(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H)
2441 gcov-dump.o: gcov-dump.c gcov-io.h gcov-io.c gcov-iov.h $(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H)
2443 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2444 # upon whether $(exeext) is empty or not.
2445 GCOV_OBJS = gcov.o intl.o version.o
2446 gcov$(exeext): $(GCOV_OBJS) $(LIBDEPS)
2447 $(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_OBJS) $(LIBS) -o $@
2448 GCOV_DUMP_OBJS = gcov-dump.o version.o
2449 gcov-dump$(exeext): $(GCOV_DUMP_OBJS) $(LIBDEPS)
2450 $(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_DUMP_OBJS) $(LIBS) -o $@
2452 # Build the include directory. The stamp files are stmp-* rather than
2453 # s-* so that mostlyclean does not force the include directory to
2456 # Build the include directory
2457 stmp-int-hdrs: $(STMP_FIXINC) $(USER_H) xlimits.h
2458 # Copy in the headers provided with gcc.
2459 # The sed command gets just the last file name component;
2460 # this is necessary because VPATH could add a dirname.
2461 # Using basename would be simpler, but some systems don't have it.
2462 # The touch command is here to workaround an AIX/Linux NFS bug.
2463 -if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi
2464 for file in .. $(USER_H); do \
2465 if [ X$$file != X.. ]; then \
2466 realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2467 $(STAMP) include/$$realfile; \
2468 rm -f include/$$realfile; \
2469 cp $$file include; \
2470 chmod a+r include/$$realfile; \
2473 rm -f include/limits.h
2474 cp xlimits.h include/limits.h
2475 chmod a+r include/limits.h
2476 # Install the README
2477 rm -f include/README
2478 cp $(srcdir)/README-fixinc include/README
2479 chmod a+r include/README
2482 # fixinc.sh depends on this, not on specs directly.
2483 # The idea is to make sure specs gets built, but not rerun fixinc.sh
2484 # after each stage just because specs' mtime has changed.
2486 -if [ -f specs.ready ] ; then \
2489 $(STAMP) specs.ready; \
2492 # Until someone fixes this recursive make nightmare (please note where
2493 # BUILD_CFLAGS and WARN_CFLAGS are first expanded below versus which
2494 # later make invocation has the fine-grain -warn markings for fixinc):
2495 fixinc.sh-warn = -Wno-error
2497 FIXINCSRCDIR=$(srcdir)/fixinc
2498 fixinc.sh: $(FIXINCSRCDIR)/mkfixinc.sh $(FIXINCSRCDIR)/fixincl.c \
2499 $(FIXINCSRCDIR)/procopen.c $(FIXINCSRCDIR)/server.c \
2500 $(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def specs.ready
2501 (MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc && ${PWD_COMMAND}` ; \
2502 CC="$(CC_FOR_BUILD)"; CFLAGS="$(BUILD_CFLAGS)"; LDFLAGS="$(BUILD_LDFLAGS)"; \
2503 WARN_CFLAGS="$(WARN_CFLAGS)"; LIBERTY=`${PWD_COMMAND}`/"$(BUILD_LIBIBERTY)"; \
2504 export MAKE srcdir CC CFLAGS LDFLAGS WARN_CFLAGS LIBERTY; \
2506 $(SHELL) $${srcdir}/mkfixinc.sh $(build) $(target))
2508 .PHONY: install-gcc-tooldir
2509 install-gcc-tooldir:
2510 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(gcc_tooldir)
2512 # Build fixed copies of system files.
2513 stmp-fixinc: fixinc.sh gsyslimits.h
2514 @if test ! -d ${SYSTEM_HEADER_DIR}; then \
2515 echo The directory that should contain system headers does not exist: >&2 ; \
2516 echo " ${SYSTEM_HEADER_DIR}" >&2 ; \
2517 if test "x${SYSTEM_HEADER_DIR}" = "x${gcc_tooldir}/sys-include"; \
2518 then sleep 1; else exit 1; fi; \
2520 rm -rf include; mkdir include
2522 (TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \
2524 export TARGET_MACHINE srcdir SHELL ; \
2525 $(SHELL) ./fixinc.sh `${PWD_COMMAND}`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); \
2526 rm -f include/syslimits.h; \
2527 if [ -f include/limits.h ]; then \
2528 mv include/limits.h include/syslimits.h; \
2530 cp $(srcdir)/gsyslimits.h include/syslimits.h; \
2532 chmod a+r include/syslimits.h)
2533 $(STAMP) stmp-fixinc
2535 # Files related to the fixproto script.
2536 # gen-protos and fix-header are compiled with CC_FOR_BUILD, but they are only
2537 # used in native and host-x-target builds, so it's safe to link them with
2540 deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
2541 if [ -d "$(SYSTEM_HEADER_DIR)" ]; \
2543 CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -isystem include -isystem ${SYSTEM_HEADER_DIR}"; \
2545 $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \
2546 mv tmp-deduced.h deduced.h; \
2548 $(STAMP) deduced.h; \
2551 GEN_PROTOS_OBJS = gen-protos.o scan.o
2552 gen-protos$(build_exeext): $(GEN_PROTOS_OBJS)
2553 ${CC_FOR_BUILD} $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \
2554 $(GEN_PROTOS_OBJS) $(BUILD_LIBS)
2556 gen-protos.o: gen-protos.c scan.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H)
2558 scan.o: scan.c scan.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H)
2560 xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos$(build_exeext) Makefile
2561 sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
2562 deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
2563 mv tmp-fixtmp.c fixtmp.c
2564 $(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
2565 | sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
2566 | $(RUN_GEN) ./gen-protos >xsys-protos.hT
2567 mv xsys-protos.hT xsys-protos.h
2570 # This is nominally a 'build' program, but it's run only when host==build,
2571 # so we can (indeed, must) use $(LIBDEPS) and $(LIBS).
2572 fix-header$(build_exeext): fix-header.o scan-decls.o scan.o xsys-protos.h \
2573 c-incpath.o cppdefault.o prefix.o $(LIBDEPS) libcpp.a
2574 $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ fix-header.o \
2575 c-incpath.o cppdefault.o scan-decls.o prefix.o scan.o $(LIBS)
2577 fix-header.o: fix-header.c $(OBSTACK_H) scan.h \
2578 xsys-protos.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(CPPLIB_H)
2580 scan-decls.o: scan-decls.c scan.h $(CPPLIB_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H)
2582 # stmp-fixproto depends on this, not on fix-header directly.
2583 # The idea is to make sure fix-header gets built,
2584 # but not rerun fixproto after each stage
2585 # just because fix-header's mtime has changed.
2586 fixhdr.ready: fix-header$(build_exeext)
2587 -if [ -f fixhdr.ready ] ; then \
2590 $(STAMP) fixhdr.ready; \
2593 # stmp-int-headers is to make sure fixincludes has already finished.
2594 # The if statement is so that we don't run fixproto a second time
2595 # if it has already been run on the files in `include'.
2596 stmp-fixproto: fixhdr.ready fixproto stmp-int-hdrs
2597 if [ -f include/fixed ] ; then true; \
2599 : This line works around a 'make' bug in BSDI 1.1.; \
2600 FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
2601 mkinstalldirs="$(SHELL) $(srcdir)/mkinstalldirs"; \
2602 export mkinstalldirs; \
2603 if [ -d "$(SYSTEM_HEADER_DIR)" ]; then \
2604 $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
2605 if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
2607 $(STAMP) include/fixed; \
2609 $(STAMP) stmp-fixproto
2611 # Remake the info files.
2613 doc: $(BUILD_INFO) $(GENERATED_MANPAGES) gccbug
2615 INFOFILES = doc/cpp.info doc/gcc.info doc/gccint.info \
2616 doc/gccinstall.info doc/cppinternals.info
2618 info: $(INFOFILES) lang.info @GENINSRC@ srcinfo lang.srcinfo
2620 srcinfo: $(INFOFILES)
2621 -cp -p $^ $(srcdir)/doc
2623 TEXI_CPP_FILES = cpp.texi fdl.texi cppenv.texi cppopts.texi
2625 TEXI_GCC_FILES = gcc.texi gcc-common.texi frontends.texi standards.texi \
2626 invoke.texi extend.texi md.texi objc.texi gcov.texi trouble.texi \
2627 bugreport.texi service.texi contribute.texi compat.texi funding.texi \
2628 gnu.texi gpl.texi fdl.texi contrib.texi cppenv.texi cppopts.texi
2630 TEXI_GCCINT_FILES = gccint.texi gcc-common.texi contribute.texi makefile.texi \
2631 configterms.texi portability.texi interface.texi passes.texi \
2632 c-tree.texi rtl.texi md.texi tm.texi hostconfig.texi fragments.texi \
2633 configfiles.texi collect2.texi headerdirs.texi funding.texi gnu.texi \
2634 gpl.texi fdl.texi contrib.texi languages.texi sourcebuild.texi \
2635 gty.texi libgcc.texi
2637 TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi
2639 TEXI_CPPINT_FILES = cppinternals.texi
2641 # The *.1, *.7, *.info, and *.dvi files are being generated from implicit
2642 # patterns. To use them, put each of the specific target with with their
2643 # specific dependencies but no build commands.
2645 doc/cpp.info: $(TEXI_CPP_FILES)
2646 doc/gcc.info: $(TEXI_GCC_FILES)
2647 doc/gccint.info: $(TEXI_GCCINT_FILES)
2648 doc/cppinternals.info: $(TEXI_CPPINT_FILES)
2651 if [ x$(BUILD_INFO) = xinfo ]; then \
2652 $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \
2653 -I $(docdir)/include -o $@ $<; \
2656 # Duplicate entry to handle renaming of gccinstall.info
2657 doc/gccinstall.info: $(TEXI_GCCINSTALL_FILES)
2658 if [ x$(BUILD_INFO) = xinfo ]; then \
2659 $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \
2660 -I $(docdir)/include -o $@ $<; \
2663 doc/cpp.dvi: $(TEXI_CPP_FILES)
2664 doc/gcc.dvi: $(TEXI_GCC_FILES)
2665 doc/gccint.dvi: $(TEXI_GCCINT_FILES)
2666 doc/cppinternals.dvi: $(TEXI_CPPINT_FILES)
2668 dvi:: doc/gcc.dvi doc/gccint.dvi doc/gccinstall.dvi doc/cpp.dvi \
2669 doc/cppinternals.dvi
2672 $(TEXI2DVI) -I $(docdir) -I $(docdir)/include -o $@ $<
2674 # Duplicate entry to handle renaming of gccinstall.dvi
2675 doc/gccinstall.dvi: $(TEXI_GCCINSTALL_FILES)
2676 $(TEXI2DVI) -I $(docdir) -I $(docdir)/include -o $@ $<
2678 MANFILES = doc/gcov.1 doc/cpp.1 doc/gcc.1 doc/gfdl.7 doc/gpl.7 doc/fsf-funding.7
2680 generated-manpages: $(MANFILES) lang.man @GENINSRC@ srcman lang.srcman
2683 -cp -p $^ $(srcdir)/doc
2687 -($(POD2MAN) --section=1 $< > $(@).T$$$$ && \
2688 mv -f $(@).T$$$$ $@) || \
2689 (rm -f $(@).T$$$$ && exit 1)
2693 -($(POD2MAN) --section=7 $< > $(@).T$$$$ && \
2694 mv -f $(@).T$$$$ $@) || \
2695 (rm -f $(@).T$$$$ && exit 1)
2699 -$(TEXI2POD) $< > $@
2701 .INTERMEDIATE: cpp.pod gcc.pod gfdl.pod fsf-funding.pod
2702 cpp.pod: cpp.texi cppenv.texi cppopts.texi
2704 # These next rules exist because the output name is not the same as
2705 # the input name, so our implict %.pod rule will not work.
2707 gcc.pod: invoke.texi cppenv.texi cppopts.texi
2709 -$(TEXI2POD) $< > $@
2712 -$(TEXI2POD) $< > $@
2713 fsf-funding.pod: funding.texi
2715 -$(TEXI2POD) $< > $@
2718 # Deletion of files made during compilation.
2719 # There are four levels of this:
2720 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2721 # `mostlyclean' is useful while working on a particular type of machine.
2722 # It deletes most, but not all, of the files made by compilation.
2723 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2724 # `clean' deletes everything made by running `make all'.
2725 # `distclean' also deletes the files made by config.
2726 # `maintainer-clean' also deletes everything that could be regenerated
2727 # automatically, except for `configure'.
2728 # We remove as much from the language subdirectories as we can
2729 # (less duplicated code).
2731 mostlyclean: lang.mostlyclean
2732 -rm -f $(STAGESTUFF)
2733 -rm -f *$(coverageexts)
2735 # Delete the temporary source copies for cross compilation.
2736 -rm -f $(BUILD_PREFIX_1)rtl.c $(BUILD_PREFIX_1)print-rtl.c
2737 -rm -f $(BUILD_PREFIX_1)bitmap.c $(BUILD_PREFIX_1)errors.c
2738 -rm -f $(BUILD_PREFIX_1)ggc-none.c print-rtl1.c
2739 # Delete the temp files made in the course of building libgcc.a.
2741 # Delete other built files.
2742 -rm -f xsys-protos.hT
2743 -rm -f specs.h gencheck.h options.c options.h
2744 # Delete the stamp and temporary files.
2745 -rm -f s-* tmp-* stamp-* stmp-*
2746 -rm -f */stamp-* */tmp-*
2747 # Delete debugging dump files.
2748 -rm -f *.[0-9][0-9].* */*.[0-9][0-9].*
2749 # Delete some files made during installation.
2750 -rm -f specs $(SPECS) SYSCALLS.c.X SYSCALLS.c
2751 -rm -f collect collect2 mips-tfile mips-tdump
2752 # Delete files generated for fixproto
2753 -rm -rf fix-header$(build_exeext) xsys-protos.h deduced.h tmp-deduced.h \
2754 gen-protos$(build_exeext) fixproto.list fixtmp.* fixhdr.ready
2755 # Delete files generated for fixincl
2756 -rm -rf fixincl fixinc.sh specs.ready
2757 (cd fixinc && $(MAKE) clean)
2758 # Delete unwanted output files from TeX.
2759 -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
2760 -rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
2761 # Delete sorted indices we don't actually use.
2762 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2763 # Delete core dumps.
2765 # Delete file generated for gengtype.c
2767 # Delete files generated by gengtype.c
2771 # Delete all files made by compilation
2772 # that don't exist in the distribution.
2773 clean: mostlyclean lang.clean
2774 -rm -f libgcc.a libgcc_eh.a libgcov.a
2775 -rm -f libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).1
2776 -rm -f config.h tconfig.h bconfig.h tm_p.h tm.h
2780 # Delete the include directory.
2782 # Delete files used by the "multilib" facility (including libgcc subdirs).
2783 -rm -f multilib.h tmpmultilib*
2784 -if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
2785 rm -rf $(MULTILIB_DIRNAMES); \
2786 else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
2787 rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2789 -rm -fr stage1 stage2 stage3 stage4 stageprofile stagefeedback
2790 # Delete stamps of bootstrap stages
2795 # Delete all files that users would normally create
2796 # while building and installing GCC.
2797 distclean: clean lang.distclean
2798 -rm -f auto-host.h auto-build.h
2800 -rm -f config.status config.run config.cache config.bak
2801 -rm -f Make-lang Make-hooks Make-host Make-target
2802 -rm -f Makefile *.oaux
2803 -rm -f gthr-default.h
2804 -rm -f */stage1 */stage2 */stage3 */stage4 */include */stageprofile */stagefeedback
2805 -rm -f c-parse.y c-parse.c c-parse.output TAGS */TAGS
2807 -rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
2808 -rm -f testsuite/*.log testsuite/*.sum
2809 -cd testsuite && rm -f x *.x *.x? *.exe *.rpo *.o *.s *.S *.c
2810 -cd testsuite && rm -f *.out *.gcov *$(coverageexts)
2811 -rm -rf ${QMTEST_DIR} stamp-qmtest
2813 -rm -f mklibgcc mkheaders gccbug .gdbinit configargs.h
2815 -rm -f fixinc/Makefile
2816 # Delete po/*.gmo only if we are not building in the source directory.
2817 -if [ ! -f po/exgettext ]; then rm -f po/*.gmo; fi
2818 -rmdir ada cp f java objc fixinc intl po testsuite 2>/dev/null
2820 # Get rid of every file that's generated from some other file, except for `configure'.
2821 # Most of these files ARE PRESENT in the GCC distribution.
2823 @echo 'This command is intended for maintainers to use; it'
2824 @echo 'deletes files that may need special tools to rebuild.'
2825 $(MAKE) lang.maintainer-clean distclean
2826 -rm -f $(srcdir)/c-parse.y $(srcdir)/c-parse.c
2827 -rm -f cpp.??s cpp.*aux
2828 -rm -f gcc.??s gcc.*aux
2829 -rm -f $(docdir)/*.info $(docdir)/*.1 $(docdir)/*.7 $(docdir)/*.dvi
2831 # Entry points `install' and `uninstall'.
2832 # Also use `install-collect2' to install collect2 when the config files don't.
2834 # Copy the compiler files into directories where they will be run.
2835 # Install the driver last so that the window when things are
2837 install: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
2838 install-cpp install-man install-info install-@POSUB@ \
2839 lang.install-normal install-driver
2841 # Handle cpp installation.
2842 install-cpp: cpp$(exeext)
2843 -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
2844 -$(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
2845 -if [ x$(cpp_install_dir) != x ]; then \
2846 rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
2847 $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
2850 # Create the installation directories.
2851 # $(libdir)/gcc/include isn't currently searched by cpp.
2853 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(libsubdir)
2854 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(libexecsubdir)
2855 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(bindir)
2856 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(includedir)
2857 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(infodir)
2858 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(slibdir)
2859 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(man1dir)
2860 $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(man7dir)
2862 # Install the compiler executables built during cross compilation.
2863 install-common: native $(EXTRA_PARTS) lang.install-common installdirs
2864 for file in $(COMPILERS); do \
2865 if [ -f $$file ] ; then \
2866 rm -f $(DESTDIR)$(libexecsubdir)/$$file; \
2867 $(INSTALL_PROGRAM) $$file $(DESTDIR)$(libexecsubdir)/$$file; \
2871 for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
2872 if [ x"$$file" != x.. ]; then \
2873 rm -f $(DESTDIR)$(libexecsubdir)/$$file; \
2874 $(INSTALL_PROGRAM) $$file $(DESTDIR)$(libexecsubdir)/$$file; \
2877 for file in $(EXTRA_PARTS) ..; do \
2878 if [ x"$$file" != x.. ]; then \
2879 rm -f $(DESTDIR)$(libsubdir)/$$file; \
2880 $(INSTALL_DATA) $$file $(DESTDIR)$(libsubdir)/$$file; \
2881 chmod a-x $(DESTDIR)$(libsubdir)/$$file; \
2884 # Don't mess with specs if it doesn't exist yet.
2885 -if [ -f specs ] ; then \
2886 rm -f $(DESTDIR)$(libsubdir)/specs; \
2887 $(INSTALL_DATA) $(SPECS) $(DESTDIR)$(libsubdir)/specs; \
2888 chmod a-x $(DESTDIR)$(libsubdir)/specs; \
2890 # Install protoize if it was compiled.
2891 -if [ -f protoize$(exeext) ]; then \
2892 rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
2893 $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
2894 rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
2895 $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
2896 rm -f $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
2897 $(INSTALL_DATA) SYSCALLS.c.X $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
2898 chmod a-x $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
2900 # Install gcov if it was compiled.
2901 -if [ -f gcov$(exeext) ]; \
2903 rm -f $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
2904 $(INSTALL_PROGRAM) gcov$(exeext) $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
2906 $(INSTALL_SCRIPT) gccbug $(DESTDIR)$(bindir)/$(GCCBUG_INSTALL_NAME)
2908 # Install the driver program as $(target_noncanonical)-gcc,
2909 # $(target_noncanonical)-gcc-$(version)
2910 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2911 install-driver: installdirs xgcc$(exeext)
2912 -rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
2913 -$(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
2914 -rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-$(version)
2915 -( cd $(DESTDIR)$(bindir) && \
2916 $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-$(version) )
2917 -if [ -f gcc-cross$(exeext) ] ; then \
2918 if [ -d $(DESTDIR)$(gcc_tooldir)/bin/. ] ; then \
2919 rm -f $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \
2920 $(INSTALL_PROGRAM) gcc-cross$(exeext) $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \
2923 rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-tmp$(exeext); \
2924 ( cd $(DESTDIR)$(bindir) && \
2925 $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-tmp$(exeext) && \
2926 mv -f $(target_noncanonical)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \
2929 # Install the info files.
2930 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2931 # to do the install.
2932 install-info:: doc installdirs \
2933 $(DESTDIR)$(infodir)/cpp.info \
2934 $(DESTDIR)$(infodir)/gcc.info \
2935 $(DESTDIR)$(infodir)/cppinternals.info \
2936 $(DESTDIR)$(infodir)/gccinstall.info \
2937 $(DESTDIR)$(infodir)/gccint.info
2939 $(DESTDIR)$(infodir)/%.info: doc/%.info installdirs
2941 if [ -f $< ]; then \
2942 for f in $(<)*; do \
2943 realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2944 $(INSTALL_DATA) $$f $(DESTDIR)$(infodir)/$$realfile; \
2945 chmod a-x $(DESTDIR)$(infodir)/$$realfile; \
2948 -if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
2949 if [ -f $(DESTDIR)$(infodir)/dir ] ; then \
2950 if [ -f $@ ]; then \
2951 install-info --dir-file=$(DESTDIR)$(infodir)/dir $@; \
2956 # Install the man pages.
2957 install-man: installdirs lang.install-man \
2958 $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext) \
2959 $(DESTDIR)$(man1dir)/cpp$(man1ext) \
2960 $(DESTDIR)$(man1dir)/gcov$(man1ext) \
2961 $(DESTDIR)$(man7dir)/fsf-funding$(man7ext) \
2962 $(DESTDIR)$(man7dir)/gfdl$(man7ext) \
2963 $(DESTDIR)$(man7dir)/gpl$(man7ext)
2965 $(DESTDIR)$(man1dir)/%$(man1ext): doc/%.1
2967 -$(INSTALL_DATA) $< $@
2970 $(DESTDIR)$(man7dir)/%$(man7ext): doc/%.7
2972 -$(INSTALL_DATA) $< $@
2975 $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext): doc/gcc.1
2977 -$(INSTALL_DATA) $< $@
2980 # Install the library.
2981 install-libgcc: libgcc.mk libgcc.a libgcov.a installdirs
2983 CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
2984 CONFIG_H="$(TCONFIG_H)" \
2986 -f libgcc.mk install
2988 # Install multiple versions of libgcc.a, libgcov.a.
2989 install-multilib: stmp-multilib installdirs
2991 CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
2992 CONFIG_H="$(CONFIG_H)" \
2994 -f libgcc.mk install
2996 # Install all the header files built in the include subdirectory.
2997 install-headers: $(INSTALL_HEADERS_DIR)
2998 # Fix symlinks to absolute paths in the installed include directory to
2999 # point to the installed directory, not the build directory.
3000 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
3001 -files=`cd $(DESTDIR)$(libsubdir)/include; find . -type l -print 2>/dev/null`; \
3002 if [ $$? -eq 0 ]; then \
3003 dir=`cd include; ${PWD_COMMAND}`; \
3004 for i in $$files; do \
3005 dest=`ls -ld $(DESTDIR)$(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
3006 if expr "$$dest" : "$$dir.*" > /dev/null; then \
3007 rm -f $(DESTDIR)$(libsubdir)/include/$$i; \
3008 ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(DESTDIR)$(libsubdir)/include/$$i; \
3013 # Create or recreate the gcc private include file directory.
3014 install-include-dir: installdirs
3015 -rm -rf $(DESTDIR)$(libsubdir)/include
3016 mkdir $(DESTDIR)$(libsubdir)/include
3017 -chmod a+rx $(DESTDIR)$(libsubdir)/include
3019 # Install the include directory using tar.
3020 install-headers-tar: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
3021 # We use `pwd`/include instead of just include to problems with CDPATH
3022 # Unless a full pathname is provided, some shells would print the new CWD,
3023 # found in CDPATH, corrupting the output. We could just redirect the
3024 # output of `cd', but some shells lose on redirection within `()'s
3025 (cd `${PWD_COMMAND}`/include ; \
3026 tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include; tar xpf - )
3027 # /bin/sh on some systems returns the status of the first tar,
3028 # and that can lose with GNU tar which always writes a full block.
3029 # So use `exit 0' to ignore its exit status.
3031 # Install the include directory using cpio.
3032 install-headers-cpio: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
3033 # See discussion about the use of `pwd` above
3034 cd `${PWD_COMMAND}`/include ; \
3035 find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include
3037 # Install the include directory using cp.
3038 install-headers-cp: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
3039 cp -p -r include $(DESTDIR)$(libsubdir)
3041 itoolsdir = $(libexecsubdir)/install-tools
3042 itoolsdatadir = $(libsubdir)/install-tools
3043 # Don't install the headers. Instead, install appropriate scripts
3044 # and supporting files for fixincludes to be run later.
3045 install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir \
3047 -rm -rf $(DESTDIR)$(itoolsdir) $(DESTDIR)$(itoolsdatadir)
3048 $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(itoolsdatadir)/include
3049 $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(itoolsdir)
3050 for file in $(USER_H); do \
3051 realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
3052 $(INSTALL_DATA) $$file \
3053 $(DESTDIR)$(itoolsdatadir)/include/$$realfile ; \
3055 $(INSTALL_DATA) xlimits.h $(DESTDIR)$(itoolsdatadir)/include/limits.h
3056 if [ x$(STMP_FIXINC) != x ] ; then \
3057 $(INSTALL_DATA) $(srcdir)/README-fixinc \
3058 $(DESTDIR)$(itoolsdatadir)/include/README ; \
3059 $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh ; \
3060 $(INSTALL_PROGRAM) fixinc/fixincl $(DESTDIR)$(itoolsdir)/fixincl ; \
3061 $(INSTALL_DATA) $(srcdir)/gsyslimits.h \
3062 $(DESTDIR)$(itoolsdatadir)/gsyslimits.h ; \
3064 if [ x$(STMP_FIXPROTO) != x ] ; then \
3065 $(INSTALL_SCRIPT) $(srcdir)/mkinstalldirs \
3066 $(DESTDIR)$(itoolsdir)/mkinstalldirs ; \
3067 $(INSTALL_SCRIPT) $(srcdir)/fixproto $(DESTDIR)$(itoolsdir)/fixproto ; \
3068 $(INSTALL_PROGRAM) fix-header$(build_exeext) \
3069 $(DESTDIR)$(itoolsdir)/fix-header$(build_exeext) ; \
3071 $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders
3072 echo 'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \
3073 > $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
3074 echo 'OTHER_FIXINCLUDES_DIRS="$(OTHER_FIXINCLUDES_DIRS)"' \
3075 >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
3076 echo 'FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"' \
3077 >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
3078 echo 'STMP_FIXPROTO="$(STMP_FIXPROTO)"' \
3079 >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
3080 echo 'STMP_FIXINC="$(STMP_FIXINC)"' \
3081 >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
3083 # Use this target to install the program `collect2' under the name `collect2'.
3084 install-collect2: collect2 installdirs
3085 $(INSTALL_PROGRAM) collect2$(exeext) $(DESTDIR)$(libexecsubdir)/collect2$(exeext)
3086 # Install the driver program as $(libsubdir)/gcc for collect2.
3087 $(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(libexecsubdir)/gcc$(exeext)
3089 # Cancel installation by deleting the installed files.
3090 uninstall: lang.uninstall
3091 -rm -rf $(DESTDIR)$(libsubdir)
3092 -rm -rf $(DESTDIR)$(libexecsubdir)
3093 -rm -rf $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
3094 -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
3095 -if [ x$(cpp_install_dir) != x ]; then \
3096 rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
3098 -rm -rf $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext)
3099 -rm -rf $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext)
3100 -rm -rf $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
3101 -rm -rf $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
3102 -rm -rf $(DESTDIR)$(man1dir)/cpp$(man1ext)
3103 -rm -rf $(DESTDIR)$(man1dir)/protoize$(man1ext)
3104 -rm -rf $(DESTDIR)$(man1dir)/unprotoize$(man1ext)
3105 -rm -f $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info*
3106 -rm -f $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info*
3108 # These targets are for the dejagnu testsuites. The file site.exp
3109 # contains global variables that all the testsuites will use.
3111 target_subdir = @target_subdir@
3113 site.exp: ./config.status Makefile
3114 @echo "Making a new config file..."
3117 -@mv site.exp site.bak
3118 @echo "## these variables are automatically generated by make ##" > ./tmp0
3119 @echo "# Do not edit here. If you wish to override these values" >> ./tmp0
3120 @echo "# add them to the last section" >> ./tmp0
3121 @echo "set rootme \"`${PWD_COMMAND}`\"" >> ./tmp0
3122 @echo "set srcdir \"`cd ${srcdir}; ${PWD_COMMAND}`\"" >> ./tmp0
3123 @echo "set host_triplet $(host)" >> ./tmp0
3124 @echo "set build_triplet $(build)" >> ./tmp0
3125 @echo "set target_triplet $(target)" >> ./tmp0
3126 @echo "set target_alias $(target_noncanonical)" >> ./tmp0
3127 # CFLAGS is set even though it's empty to show we reserve the right to set it.
3128 @echo "set CFLAGS \"\"" >> ./tmp0
3129 @echo "set CXXFLAGS \"\"" >> ./tmp0
3130 @echo "set TESTING_IN_BUILD_TREE 1" >> ./tmp0
3131 @echo "set HAVE_LIBSTDCXX_V3 1" >> ./tmp0
3132 # If newlib has been configured, we need to pass -B to gcc so it can find
3133 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
3134 # message if it doesn't, but the testsuite is supposed to ignore the message -
3135 # it's too difficult to tell when to and when not to pass -B (not all targets
3136 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
3137 # seems like too selective a test.
3138 # ??? Another way to solve this might be to rely on linker scripts. Then
3139 # theoretically the -B won't be needed.
3140 # We also need to pass -L ../ld so that the linker can find ldscripts.
3141 @if [ -d $(objdir)/../$(target_subdir)/newlib ] \
3142 && [ "${host}" != "${target}" ]; then \
3143 echo "set newlib_cflags \"-I$(objdir)/../$(target_subdir)/newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> ./tmp0; \
3144 echo "set newlib_ldflags \"-B$(objdir)/../$(target_subdir)/newlib/\"" >> ./tmp0; \
3145 echo "append CFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \
3146 echo "append CXXFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \
3147 echo "append LDFLAGS \" \$$newlib_ldflags\"" >> ./tmp0; \
3150 @if [ -d $(objdir)/../ld ] ; then \
3151 echo "append LDFLAGS \" -L$(objdir)/../ld\"" >> ./tmp0; \
3154 echo "set tmpdir $(objdir)/testsuite" >> ./tmp0
3155 @echo "set srcdir \"\$${srcdir}/testsuite\"" >> ./tmp0
3156 @if [ "X$(ALT_CC_UNDER_TEST)" != "X" ] ; then \
3157 echo "set ALT_CC_UNDER_TEST \"$(ALT_CC_UNDER_TEST)\"" >> ./tmp0; \
3160 @if [ "X$(ALT_CXX_UNDER_TEST)" != "X" ] ; then \
3161 echo "set ALT_CXX_UNDER_TEST \"$(ALT_CXX_UNDER_TEST)\"" >> ./tmp0; \
3164 @if [ "X$(COMPAT_OPTIONS)" != "X" ] ; then \
3165 echo "set COMPAT_OPTIONS \"$(COMPAT_OPTIONS)\"" >> ./tmp0; \
3168 @echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0
3169 @cat ./tmp0 > site.exp
3170 @cat site.bak | sed \
3171 -e '1,/^## All variables above are.*##/ d' >> site.exp
3174 CHECK_TARGETS = check-gcc @check_languages@
3176 check: $(CHECK_TARGETS)
3178 # The idea is to parallelize testing of multilibs, for example:
3179 # make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
3180 # will run 3 concurrent sessions of check-gcc, eventually testing
3181 # all 10 combinations. GNU make is required, as is a shell that expands
3182 # alternations within braces.
3183 lang_checks_parallel = $(lang_checks:=//%)
3184 $(lang_checks_parallel): site.exp
3185 target=`echo "$@" | sed 's,//.*,,'`; \
3186 variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
3187 vardots=`echo "$$variant" | sed 's,/,.,g'`; \
3188 $(MAKE) TESTSUITEDIR="testsuite.$$vardots" \
3189 RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
3192 TESTSUITEDIR = testsuite
3194 $(TESTSUITEDIR)/site.exp: site.exp
3195 test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR)
3197 sed '/set tmpdir/ s|testsuite|$(TESTSUITEDIR)|' < site.exp > $@
3199 $(lang_checks): check-% : $(TESTSUITEDIR)/site.exp
3200 -(rootme=`${PWD_COMMAND}`; export rootme; \
3201 srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
3202 cd $(TESTSUITEDIR); \
3203 EXPECT=${EXPECT} ; export EXPECT ; \
3204 if [ -f $${rootme}/../expect/expect ] ; then \
3205 TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
3206 export TCL_LIBRARY ; fi ; \
3207 $(RUNTEST) --tool $* $(RUNTESTFLAGS))
3209 check-consistency: testsuite/site.exp
3210 -rootme=`${PWD_COMMAND}`; export rootme; \
3211 srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
3213 EXPECT=${EXPECT} ; export EXPECT ; \
3214 if [ -f $${rootme}/../expect/expect ] ; then \
3215 TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
3216 export TCL_LIBRARY ; fi ; \
3217 $(RUNTEST) --tool consistency $(RUNTESTFLAGS)
3221 # The path to qmtest.
3224 # The flags to pass to qmtest.
3227 # The flags to pass to "qmtest run".
3228 QMTESTRUNFLAGS=-f none --result-stream dejagnu_stream.DejaGNUStream
3230 # The command to use to invoke qmtest.
3231 QMTEST=${QMTEST_PATH} ${QMTESTFLAGS}
3233 # The tests (or suites) to run.
3234 QMTEST_GPP_TESTS=g++
3236 # The subdirectory of the OBJDIR that will be used to store the QMTest
3237 # test database configuration and that will be used for temporary
3238 # scratch space during QMTest's execution.
3239 QMTEST_DIR=qmtestsuite
3241 # Create the QMTest database configuration.
3242 ${QMTEST_DIR} stamp-qmtest:
3243 ${QMTEST} -D ${QMTEST_DIR} create-tdb \
3244 -c gcc_database.GCCDatabase \
3245 -a srcdir=`cd ${srcdir}/testsuite && ${PWD_COMMAND}` && \
3246 $(STAMP) stamp-qmtest
3248 # Create the QMTest context file.
3249 ${QMTEST_DIR}/context: stamp-qmtest
3251 echo "CompilerTable.languages=c cplusplus" >> $@
3252 echo "CompilerTable.c_kind=GCC" >> $@
3253 echo "CompilerTable.c_path=${objdir}/xgcc" >> $@
3254 echo "CompilerTable.c_options=-B${objdir}/" >> $@
3255 echo "CompilerTable.cplusplus_kind=GCC" >> $@
3256 echo "CompilerTable.cplusplus_path=${objdir}/g++" >> $@
3257 echo "CompilerTable.cplusplus_options=-B${objdir}/" >> $@
3258 echo "DejaGNUTest.target=${target_noncanonical}" >> $@
3260 # Run the G++ testsuite using QMTest.
3261 qmtest-g++: ${QMTEST_DIR}/context
3262 cd ${QMTEST_DIR} && ${QMTEST} run ${QMTESTRUNFLAGS} -C context \
3263 -o g++.qmr ${QMTEST_GPP_TESTS}
3265 # Use the QMTest GUI.
3266 qmtest-gui: ${QMTEST_DIR}/context
3267 cd ${QMTEST_DIR} && ${QMTEST} gui -C context
3271 # Run Paranoia on real.c.
3273 paranoia.o: $(srcdir)/../contrib/paranoia.cc $(CONFIG_H) $(SYSTEM_H) \
3275 g++ -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
3277 paranoia: paranoia.o real.o $(LIBIBERTY)
3278 g++ -o $@ paranoia.o real.o $(LIBIBERTY)
3280 # These exist for maintenance purposes.
3282 # Update the tags table.
3286 list='$(SUBDIRS)'; for dir in $$list; do \
3287 if test -f $$dir/TAGS; then \
3288 incs="$$incs --include $$dir/TAGS.sub"; \
3292 mv -f c-parse.[ch] tmp-tags; \
3293 etags -o TAGS.sub *.y *.h *.c; \
3296 etags --include TAGS.sub $$incs)
3298 # ------------------------------------------------------
3299 # Bootstrap-related targets (not used during 'make all')
3300 # ------------------------------------------------------
3302 # A list of files to be destroyed during "lean" builds.
3303 VOL_FILES=`echo $(BACKEND) $(OBJS) $(C_OBJS) $(LIBCPP_OBJS) *.c *.h gen*`
3305 # Flags to pass to stage2 and later recursive makes. Note that the
3306 # WARN_CFLAGS setting can't be to the expansion of GCC_WARN_CFLAGS in
3307 # the context of the stage_x rule.
3309 POSTSTAGE1_FLAGS_TO_PASS = \
3310 ADAFLAGS="$(BOOT_ADAFLAGS)" \
3311 CFLAGS="$(BOOT_CFLAGS)" \
3312 LDFLAGS="$(BOOT_LDFLAGS)" \
3313 WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \
3314 STRICT_WARN="$(STRICT2_WARN)" \
3316 LANGUAGES="$(LANGUAGES)" \
3317 MAKEINFO="$(MAKEINFO)" \
3318 MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
3320 OUTPUT_OPTION="-o \$$@"
3322 STAGE2_FLAGS_TO_PASS = \
3323 CFLAGS="$(BOOT_CFLAGS)" \
3326 STAGEPROFILE_FLAGS_TO_PASS = \
3327 CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
3329 # Files never linked into the final executable produces warnings about missing
3331 STAGEFEEDBACK_FLAGS_TO_PASS = \
3332 CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
3334 # Only build the C compiler for stage1, because that is the only one that
3335 # we can guarantee will build with the native compiler, and also it is the
3336 # only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS),
3337 # MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
3338 # overrideable (for a bootstrap build stage1 also builds gcc.info).
3340 $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" \
3341 CFLAGS="$(STAGE1_CFLAGS)" MAKEINFO="$(MAKEINFO)" \
3342 MAKEINFOFLAGS="$(MAKEINFOFLAGS)" COVERAGE_FLAGS= \
3343 OBJS-onestep="$(OBJS)"
3344 $(STAMP) stage1_build
3345 echo stage1_build > stage_last
3347 stage1_copy: stage1_build
3349 $(STAMP) stage1_copy
3350 echo stage2_build > stage_last
3352 stage2_build: stage1_copy
3353 $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
3354 STAGE_PREFIX=stage1/ \
3355 $(POSTSTAGE1_FLAGS_TO_PASS) \
3356 $(STAGE2_FLAGS_TO_PASS)
3357 $(STAMP) stage2_build
3358 echo stage2_build > stage_last
3360 stage2_copy: stage2_build
3362 $(STAMP) stage2_copy
3363 echo stage3_build > stage_last
3365 stageprofile_build: stage1_copy
3366 $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
3367 STAGE_PREFIX=stage1/ \
3368 $(POSTSTAGE1_FLAGS_TO_PASS) \
3369 $(STAGEPROFILE_FLAGS_TO_PASS)
3370 $(STAMP) stageprofile_build
3371 echo stageprofile_build > stage_last
3373 stageprofile_copy: stageprofile_build
3374 $(MAKE) stageprofile
3375 $(STAMP) stageprofile_copy
3376 echo stagefeedback_build > stage_last
3378 stage3_build: stage2_copy
3379 $(MAKE) CC="$(STAGE_CC_WRAPPER) stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \
3380 STAGE_PREFIX=stage2/ \
3381 $(POSTSTAGE1_FLAGS_TO_PASS) \
3382 $(STAGE2_FLAGS_TO_PASS)
3383 $(STAMP) stage3_build
3384 echo stage3_build > stage_last
3386 stagefeedback_build: stageprofile_copy stage1_copy
3387 $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
3388 STAGE_PREFIX=stage1/ \
3389 $(POSTSTAGE1_FLAGS_TO_PASS) \
3390 $(STAGEFEEDBACK_FLAGS_TO_PASS)
3391 $(STAMP) stagefeedback_build
3392 echo stagefeedback_build > stage_last
3394 stagefeedback_copy: stagefeedback_build
3395 $(MAKE) stagefeedback
3396 $(STAMP) stagefeedback_copy
3397 echo stagefeedback2_build > stage_last
3400 stage3_copy: stage3_build
3402 $(STAMP) stage3_copy
3403 echo stage4_build > stage_last
3405 stage4_build: stage3_copy
3406 $(MAKE) CC="$(STAGE_CC_WRAPPER) stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" \
3407 STAGE_PREFIX=stage3/ \
3408 $(POSTSTAGE1_FLAGS_TO_PASS) \
3409 $(STAGE2_FLAGS_TO_PASS)
3410 $(STAMP) stage4_build
3411 echo stage4_build > stage_last
3413 # Additional steps for *-lean targets:
3414 clean_s1: stage1_copy
3415 -(cd stage1 && rm -f $(VOL_FILES))
3418 clean_s2: stage2_copy
3422 # The various entry points for bootstrapping.
3424 bootstrap: stage3_build
3426 @echo Bootstrap complete - make \"quickstrap\" to redo last build,
3427 @echo \"restage1\" through \"restage3\" to rebuild specific stages,
3428 @echo \"restrap\" to redo the bootstrap from stage1, or
3429 @echo \"cleanstrap\" to redo the bootstrap from scratch.
3431 bootstrap-lean : clean_s1 clean_s2 stage3_build
3433 @echo Bootstrap complete - make \"quickstrap\" to redo last build,
3434 @echo or \"cleanstrap\" to redo the bootstrap from scratch.
3436 bootstrap2: bootstrap
3438 bootstrap2-lean : bootstrap-lean
3440 bootstrap3 bootstrap3-lean: bootstrap
3442 bootstrap4 bootstrap4-lean: stage4_build
3444 unstage1 unstage2 unstage3 unstage4 unstageprofile unstagefeedback:
3445 -set -vx; stage=`echo $@ | sed -e 's/un//'`; \
3446 rm -f $$stage/as$(exeext); \
3447 rm -f $$stage/ld$(exeext); \
3448 rm -f $$stage/collect-ld$(exeext); \
3449 if test -d $$stage; then \
3450 mv $$stage/specs $(SPECS) 2>/dev/null || :; \
3451 mv $$stage/* . 2>/dev/null; \
3452 for i in `cd $$stage; echo *` ; do \
3453 if test -d $$stage/$$i; then \
3454 mv $$stage/$$i/* $$i/. 2>/dev/null; \
3460 rm -f $${stage}_build $${stage}_copy ;\
3461 echo $${stage}_build > stage_last
3464 $(MAKE) $(REMAKEFLAGS) stage1_build
3467 $(MAKE) $(REMAKEFLAGS) stage2_build
3470 $(MAKE) $(REMAKEFLAGS) stage3_build
3473 $(MAKE) $(REMAKEFLAGS) stage4_build
3475 restageprofile: unstageprofile
3476 $(MAKE) $(REMAKEFLAGS) stageprofile_build
3478 restagefeedback: unstagefeedback
3479 $(MAKE) $(REMAKEFLAGS) stagefeedback_build
3481 # Bubble up a bugfix through all the stages. Primarily useful for fixing
3482 # bugs that cause the compiler to crash while building stage 2.
3484 if test -f stage_last; then \
3485 LAST=`sed -e 's/_build//' < stage_last`; \
3486 if test "$$LAST" != "stage1"; then \
3487 $(MAKE) $(REMAKEFLAGS) $$LAST; \
3488 $(STAMP) $${LAST}_copy; \
3491 if test -f stage1_copy; then $(MAKE) unstage1; fi
3492 $(MAKE) $(REMAKEFLAGS) stage1_copy
3493 if test -f stage2_copy; then $(MAKE) unstage2; fi
3494 $(MAKE) $(REMAKEFLAGS) stage2_copy
3495 if test -f stage3_copy; then $(MAKE) unstage3; fi
3496 $(MAKE) $(REMAKEFLAGS) stage3_build
3497 if test -f stage4_copy; then \
3498 $(MAKE) $(REMAKEFLAGS) stage3_copy; $(MAKE) unstage4; \
3499 $(MAKE) $(REMAKEFLAGS) stage4_build || exit 1; \
3503 if test -f stage_last ; then \
3504 LAST=`cat stage_last`; rm $$LAST; $(MAKE) $(REMAKEFLAGS) $$LAST; \
3506 $(MAKE) $(REMAKEFLAGS) stage1_build; \
3511 $(MAKE) $(REMAKEFLAGS) bootstrap
3518 # Differs from cleanstrap in that it starts from the earlier stage1 build,
3522 $(MAKE) $(REMAKEFLAGS) bootstrap
3524 # These targets compare the object files in the current directory with
3525 # those in a stage directory. We need to skip the first N bytes of
3526 # each object file. The "slow" mechanism assumes nothing special
3527 # about cmp and uses the tail command to skip. ./ avoids a bug in
3528 # some versions of tail. The "gnu" targets use gnu cmp (diffutils
3529 # v2.4 or later), to avoid running tail and the overhead of twice
3530 # copying each object file. Likewise, the "fast" targets use the skip
3531 # parameter of cmp available on some systems to accomplish the same
3532 # thing. An exit status of 1 is precisely the result we're looking
3533 # for (other values mean other problems).
3534 slowcompare slowcompare3 slowcompare4 slowcompare-lean slowcompare3-lean slowcompare4-lean \
3535 fastcompare fastcompare3 fastcompare4 fastcompare-lean fastcompare3-lean fastcompare4-lean \
3536 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force
3538 case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
3539 for dir in . $(SUBDIRS); do \
3540 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
3541 for file in $$dir/*$(objext); do \
3544 tail +16c ./$$file > tmp-foo1; \
3545 tail +16c stage$$stage/$$file > tmp-foo2 \
3546 && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
3549 cmp $$file stage$$stage/$$file 16 16 > /dev/null 2>&1; \
3550 test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \
3553 cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1; \
3554 test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \
3561 case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
3562 if [ -f .bad_compare ]; then \
3563 echo "Bootstrap comparison failure!"; \
3568 *-lean ) rm -rf stage$$stage ;; \
3573 # Forwarding wrappers to the most appropriate version.
3574 compare: @make_compare_target@
3575 compare3: @make_compare_target@3
3576 compare4: @make_compare_target@4
3577 compare-lean: @make_compare_target@-lean
3578 compare3-lean: @make_compare_target@3-lean
3579 compare4-lean: @make_compare_target@4-lean
3581 # Copy the object files from a particular stage into a subdirectory.
3583 -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
3584 $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage1
3585 -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
3587 if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
3589 # If SPECS is overridden, make sure it is `installed' as specs.
3590 -mv $(SPECS) stage1/specs
3591 -mv $(STAGESTUFF) stage1
3592 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3593 # dir will work properly.
3594 -if [ -f as$(exeext) ] ; then (cd stage1 && $(LN_S) ../as$(exeext) .) ; else true ; fi
3595 -if [ -f ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
3596 -if [ -f collect-ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
3597 -rm -f stage1/libgcc.a stage1/libgcc_eh.a stage1/libgcov.a
3599 -$(RANLIB_FOR_TARGET) stage1/libgcc.a
3600 -cp libgcov.a stage1
3601 -$(RANLIB_FOR_TARGET) stage1/libgcov.a
3602 -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage1; \
3603 $(RANLIB_FOR_TARGET) stage1/libgcc_eh.a; \
3605 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
3606 cp stage1/$${f} . ; \
3609 stage1: force stage1-start lang.stage1
3610 -for dir in . $(SUBDIRS) ; \
3612 rm -f $$dir/*$(coverageexts) ; \
3616 -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
3617 $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage2
3618 -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
3620 if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
3622 # If SPECS is overridden, make sure it is `installed' as specs.
3623 -mv $(SPECS) stage2/specs
3624 -mv $(STAGESTUFF) stage2
3625 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3626 # dir will work properly.
3627 -if [ -f as$(exeext) ] ; then (cd stage2 && $(LN_S) ../as$(exeext) .) ; else true ; fi
3628 -if [ -f ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
3629 -if [ -f collect-ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
3630 -rm -f stage2/libgcc.a stage2/libgcov.a stage2/libgcc_eh.a
3632 -$(RANLIB_FOR_TARGET) stage2/libgcc.a
3633 -cp libgcov.a stage2
3634 -$(RANLIB_FOR_TARGET) stage2/libgcov.a
3635 -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage2; \
3636 $(RANLIB_FOR_TARGET) stage2/libgcc_eh.a; \
3638 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
3639 cp stage2/$${f} . ; \
3642 stage2: force stage2-start lang.stage2
3645 -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
3646 $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage3
3647 -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
3649 if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
3651 # If SPECS is overridden, make sure it is `installed' as specs.
3652 -mv $(SPECS) stage3/specs
3653 -mv $(STAGESTUFF) stage3
3654 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3655 # dir will work properly.
3656 -if [ -f as$(exeext) ] ; then (cd stage3 && $(LN_S) ../as$(exeext) .) ; else true ; fi
3657 -if [ -f ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
3658 -if [ -f collect-ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
3659 -rm -f stage3/libgcc.a stage3/libgcov.a stage3/libgcc_eh.a
3661 -$(RANLIB_FOR_TARGET) stage3/libgcc.a
3662 -cp libgcov.a stage3
3663 -$(RANLIB_FOR_TARGET) stage3/libgcov.a
3664 -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage3; \
3665 $(RANLIB_FOR_TARGET) stage3/libgcc_eh.a; \
3667 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
3668 cp stage3/$${f} . ; \
3671 stage3: force stage3-start lang.stage3
3674 -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
3675 $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage4
3676 -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
3678 if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
3680 # If SPECS is overridden, make sure it is `installed' as specs.
3681 -mv $(SPECS) stage4/specs
3682 -mv $(STAGESTUFF) stage4
3683 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3684 # dir will work properly.
3685 -if [ -f as$(exeext) ] ; then (cd stage4 && $(LN_S) ../as$(exeext) .) ; else true ; fi
3686 -if [ -f ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
3687 -if [ -f collect-ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
3688 -rm -f stage4/libgcc.a stage4/libgcov.a stage4/libgcc_eh.a
3690 -$(RANLIB_FOR_TARGET) stage4/libgcc.a
3691 -cp libgcov.a stage4
3692 -$(RANLIB_FOR_TARGET) stage4/libgcov.a
3693 -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage4; \
3694 $(RANLIB_FOR_TARGET) stage4/libgcc_eh.a; \
3696 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
3697 cp stage4/$${f} . ; \
3700 stage4: force stage4-start lang.stage4
3703 -if [ -d stageprofile ] ; then true ; else mkdir stageprofile ; fi
3704 $(MAKE) -f libgcc.mk libgcc-stage-start stage=stageprofile
3705 -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
3707 if [ -d stageprofile/$$dir ] ; then true ; else mkdir stageprofile/$$dir ; fi ; \
3709 -mv $(STAGESTUFF) stageprofile
3710 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3711 # dir will work properly.
3712 -if [ -f as$(exeext) ] ; then (cd stageprofile && $(LN_S) ../as$(exeext) .) ; else true ; fi
3713 -if [ -f ld$(exeext) ] ; then (cd stageprofile && $(LN_S) ../ld$(exeext) .) ; else true ; fi
3714 -if [ -f collect-ld$(exeext) ] ; then (cd stageprofile && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
3715 -rm -f stageprofile/libgcc.a stageprofile/libgcov.a stageprofile/libgcc_eh.a
3716 -cp libgcc.a stageprofile
3717 -$(RANLIB_FOR_TARGET) stageprofile/libgcc.a
3718 -cp libgcov.a stageprofile
3719 -$(RANLIB_FOR_TARGET) stageprofile/libgcov.a
3720 -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stageprofile; \
3721 $(RANLIB_FOR_TARGET) stageprofile/libgcc_eh.a; \
3723 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
3724 cp stageprofile/$${f} . ; \
3727 stageprofile: force stageprofile-start lang.stageprofile
3729 stagefeedback-start:
3730 -if [ -d stagefeedback ] ; then true ; else mkdir stagefeedback ; fi
3731 $(MAKE) -f libgcc.mk libgcc-stage-start stage=stagefeedback
3732 -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \
3734 if [ -d stagefeedback/$$dir ] ; then true ; else mkdir stagefeedback/$$dir ; fi ; \
3736 -mv $(STAGESTUFF) stagefeedback
3737 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3738 # dir will work properly.
3739 -if [ -f as$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../as$(exeext) .) ; else true ; fi
3740 -if [ -f ld$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../ld$(exeext) .) ; else true ; fi
3741 -if [ -f collect-ld$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
3742 -rm -f stagefeedback/libgcc.a stagefeedback/libgcov.a stagefeedback/libgcc_eh.a
3744 -for dir in fixinc po testsuite $(SUBDIRS); \
3746 rm -f $$dir/*.da ; \
3748 -cp libgcc.a stagefeedback
3749 -$(RANLIB_FOR_TARGET) stagefeedback/libgcc.a
3750 -cp libgcov.a stagefeedback
3751 -$(RANLIB_FOR_TARGET) stagefeedback/libgcov.a
3752 -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stagefeedback; \
3753 $(RANLIB_FOR_TARGET) stagefeedback/libgcc_eh.a; \
3755 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
3756 cp stagefeedback/$${f} . ; \
3759 stagefeedback: force stagefeedback-start lang.stagefeedback
3761 # Copy just the executable files from a particular stage into a subdirectory,
3762 # and delete the object files. Use this if you're just verifying a version
3763 # that is pretty sure to work, and you are short of disk space.
3764 risky-stage1: stage1
3767 risky-stage2: stage2
3770 risky-stage3: stage3
3773 risky-stage4: stage4
3776 #In GNU Make, ignore whether `stage*' exists.
3777 .PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap
3778 .PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3779 .PHONY: stagefeedback stageprofile
3781 # -----------------------------------------------------
3782 # Rules for generating translated message descriptions.
3783 # Disabled by autoconf if the tools are not available.
3784 # -----------------------------------------------------
3786 XGETTEXT = @XGETTEXT@
3791 CATALOGS = @CATALOGS@
3793 .PHONY: build- install- build-po install-po update-po
3795 # Dummy rules to deal with dependencies produced by use of
3796 # "build-@POSUB@" and "install-@POSUB@" above, when NLS is disabled.
3800 build-po: $(CATALOGS)
3802 # This notation should be acceptable to all Make implementations used
3803 # by people who are interested in updating .po files.
3804 update-po: $(CATALOGS:.gmo=.pox)
3806 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
3809 -test -d po || mkdir po
3810 $(GMSGFMT) --statistics -o $@ $<
3812 # The new .po has to be gone over by hand, so we deposit it into
3813 # build/po with a different extension.
3814 # If build/po/$(PACKAGE).pot exists, use it (it was just created),
3815 # else use the one in srcdir.
3817 -test -d po || mkdir po
3818 $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
3819 then echo po/$(PACKAGE).pot; \
3820 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
3822 # This rule has to look for .gmo modules in both srcdir and
3823 # the cwd, and has to check that we actually have a catalog
3824 # for each language, in case they weren't built or included
3825 # with the distribution.
3827 $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(datadir)
3828 cats="$(CATALOGS)"; for cat in $$cats; do \
3829 lang=`basename $$cat | sed 's/\.gmo$$//'`; \
3830 if [ -f $$cat ]; then :; \
3831 elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
3834 dir=$(localedir)/$$lang/LC_MESSAGES; \
3835 echo $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$$dir; \
3836 $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$$dir || exit 1; \
3837 echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
3838 $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
3841 # Rule for regenerating the message template (gcc.pot).
3842 # Instead of forcing everyone to edit POTFILES.in, which proved impractical,
3843 # this rule has no dependencies and always regenerates gcc.pot. This is
3844 # relatively harmless since the .po files do not directly depend on it.
3845 # Note that exgettext has an awk script embedded in it which requires a
3846 # fairly modern (POSIX-compliant) awk.
3847 # The .pot file is left in the build directory.
3848 $(PACKAGE).pot: po/$(PACKAGE).pot
3849 po/$(PACKAGE).pot: force
3850 -test -d po || mkdir po
3851 $(MAKE) po-generated
3852 AWK=$(AWK) $(SHELL) $(srcdir)/po/exgettext \
3853 $(XGETTEXT) $(PACKAGE) $(srcdir)