1 2007-01-12 Richard Sandiford <richard@codesourcery.com>
3 * cse.c (cse_insn): Move HAVE_CC0 code after declarations.
5 2007-01-12 Richard Sandiford <richard@codesourcery.com>
7 * doc/install.texi: Fix m68k-*-* anchor and add m68k-*-* to the
10 2007-01-12 Nathan Sidwell <nathan@codesourcery.com>
11 Richard Sandiford <richard@codesourcery.com>
13 * doc/invoke.texi: Document -mno-bitfield, -mno-rtd and -mno-short.
14 * config/m68k/m68k.opt: Resort options.
15 (mbitfield, mrtd, mshort): Remove RejectNegative properties.
17 2007-01-12 Nathan Sidwell <nathan@codesourcery.com>
18 Richard Sandiford <richard@codesourcery.com>
20 * doc/invoke.texi: Document the macros that are defined by
21 m68k's -mtune and -mhard-float options.
22 * config/m68k/m68k-protos.h (m68k_cpp_cpu_ident) Declare.
23 (m68k_cpp_cpu_family): Likewise.
24 * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Add a full set
25 of __ucfv*__ macros. Define __mcffpu__ if generating code for
26 ColdFire FPUs. Define __mcf_cpu_* and __mcf_family_* macros.
27 * config/m68k/m68k.c (m68k_cpp_cpu_ident): New function.
28 (m68k_cpp_cpu_family): Likewise.
30 2007-01-12 Richard Sandiford <richard@codesourcery.com>
32 * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Treat all mc68*
33 macros besides mc68000 as tuning macros. Use a switch statement
34 to set them and mcpu32.
36 2007-01-12 Julian Brown <julian@codesourcery.com>
38 * config/m68k/m68k.h: Use TARGET_68040 instead of TARGET_68040_ONLY.
39 (TARGET_68040_ONLY): Rename to...
40 (TARGET_68040): ...this.
41 * config/m68k/m68k.c: Use TARGET_68040 instead of TARGET_68040_ONLY.
42 * config/m68k/m68k.md: Likewise.
44 2007-01-12 Julian Brown <julian@codesourcery.com>
45 Nathan Sidwell <nathan@codesourcery.com>
46 Richard Sandiford <richard@codesourcery.com>
48 * config.gcc (m680[012]0-*-*, m68k*-*-*): Set m68k_cpu_ident to
49 the -mcpu= argument associated with the --with-cpu setting.
50 Define M68K_DEFAULT_TUNE to the default -mtune= option,
51 if different from the one implied by the -mcpu setting.
52 Accept --with-cpu=FOO if FOO is listed in m68k-devices.def,
53 using mcpu=FOO as the default CPU option. Set target_cpu_default2.
54 * doc/invoke.texi: Mention ColdFire in the introduction to the
55 m68k options. Document the new -march, -mcpu, -mtune, -mdiv,
56 -mno-div and -mhard-float options. Make -m68881 a synonym for
57 -mhard-float. Document the previously-undocumented -m5206e,
58 -m528x, -m5307 and -m5407 options. Tweak the existing option
59 documentation for consistency.
60 * doc/install.texi: Mention new --with-cpu arguments.
61 * config/m68k/m68k.h (OPTION_DEFAULT_SPECS): Only use the
62 default CPU if neither -mcpu nor -march are specified.
63 (ASM_CPU_SPEC): Pass down -mcpu and -march options.
64 (TARGET_CPU_CPP_BUILTINS): Set __mcfisa*__ macros from
65 TARGET_ISA*. Set the legacy __mcf*__ cpu macros in the same way,
66 using m68k_tune to decide between families that implement the
67 same ISA. Use m68k_tune to set __mcfv4e__.
68 (FL_BITFIELD, FL_68881, FL_COLDFIRE, FL_CF_HWDIV, FL_CF_MAC)
69 (FL_CF_EMAC, FL_CF_EMAC_B, FL_CF_USP, FL_CF_FPU, FL_ISA_68000)
70 (FL_ISA_68010, FL_ISA_68020, FL_ISA_68040, FL_ISA_A, FL_ISA_B)
71 (FL_ISA_C, FL_ISA_MMU): New macros.
72 (MASK_COLDFIRE): Delete.
73 (TARGET_68010, TARGET_68020, TARGET_68040_ONLY, TARGET_COLDFIRE)
74 (TARGET_ISAB): Redefine in terms of m68k_cpu_flags.
75 (TARGET_68881, TARGET_COLDFIRE_FPU): Redefine in terms of m68k_fpu.
76 (TARGET_HARD_FLOAT): Do not define here.
77 (TARGET_ISAAPLUS, TARGET_ISAC): New macros.
78 (TUNE_68000): New macro.
79 (TUNE_68000_10): Redefine in terms of TUNE_68000 and TUNE_68010.
80 (TUNE_68010, TUNE_68030, TUNE_68040, TUNE_68060, TUNE_CPU32)
81 (TUNE_CFV2): Redefine in terms of m68k_tune.
82 (uarch_type, target_device, fpu_type): New enums.
83 (m68k_cpu, m68k_tune, m68k_fpu, m68k_cpu_flags): Declare.
84 * config/m68k/m68k.c (TARGET_DEFAULT): Remove MASK_68881.
85 (FL_FOR_isa_00, FL_FOR_isa_10, FL_FOR_isa_20, FL_FOR_isa_40)
86 (FL_FOR_isa_cpu32, FL_FOR_isa_a, FL_FOR_isa_aplus, FL_FOR_isa_b)
87 (FL_FOR_isa_c): New macros.
89 (m68k_target_selection): New structure.
90 (all_devices, all_isas, all_microarchs): New tables.
91 (m68k_cpu_entry, m68k_arch_entry, m68k_tune_entry, m68k_cpu)
92 (m68k_tune, m68k_fpu, m68k_cpu_flags): New variables.
93 (MASK_ALL_CPU_BITS): Delete.
94 (m68k_find_selection): New function.
95 (m68k_handle_option): Handle -mcpu=, -march= and -mtune=.
96 Map the legacy target options to a combination of the new ones.
97 (override_options): Set m68k_cpu, m68k_tune, m68k_fpu and
98 m68k_cpu_flags. Handle M68K_DEFAULT_TUNE. Use m68k_cpu_flags
99 to derive default MASK_BITFIELD, MASK_CF_HWDIV and MASK_HARD_FLOAT
101 * config/m68k/m68k.opt (m5200, m5206e, m528x, m5307, m5407, mcfv4e)
102 (m68010, m68020, m68020-40, m68020-60, m68030, m68040): Remove Mask
104 (m68881, msoft-float): Change mask from 68881 to HARD_FLOAT.
105 (march=, mcpu=, mdiv, mhard-float, mtune=): New options.
106 * config/m68k/m68k-devices.def: New file.
108 2007-01-12 Richard Sandiford <richard@codesourcery.com>
109 Nathan Sidwell <nathan@codesourcery.com>
111 * config/m68k/m68k.h (ASM_CPU_SPEC, ASM_SPEC, EXTRA_SPECS)
112 (SUBTARGET_EXTRA_SPECS): New macros.
113 * config/m68k/linux.h (ASM_SPEC): Remove CPU flags;
114 use %(asm_cpu_spec) instead.
115 * config/m68k/m68k-none.h (ASM_SPEC): Likewise.
116 * config/m68k/openbsd.h (ASM_SPEC): Likewise.
117 * config/m68k/netbsd-elf.h (ASM_SPEC): Likewise.
118 (EXTRA_SPECS): Rename to...
119 (SUBTARGET_EXTRA_SPECS): ...this.
121 2007-01-12 Nathan Sidwell <nathan@codesourcery.com>
122 Richard Sandiford <richard@codesourcery.com>
123 Julian Brown <julian@codesourcery.com>
125 * config.gcc (m68k-*-aout*, m68k-*-coff*, m68020-*-elf*, m68k-*-elf*)
126 (m68k-*-uclinux*, m68k-*-linux*, m68k-*-rtems*): Set default_m68k_cpu
127 to the configuration's default CPU.
128 (m68010-*-netbsdelf*, m68k*-*-netbsdelf*, m68k*-*-openbsd*): Likewise.
129 Remove default masks.
130 (m680[012]0-*-*): Set the default with_cpu to the first part of
132 (m68k*-*-*): Set the default with_cpu to m$default_m68k_cpu.
133 (m68k*-*-linux): Extend the --with-cpu handling to...
134 (m680[012]0-*-*, m68k*-*-*): ...these configurations. Allow m68000
135 and m68010. Don't set target_cpu_default2.
136 * doc/install.texi: Document --with-cpu for m68k.
137 * config/m68k/m68k.h (OPTION_DEFAULT_SPECS): Define.
138 * config/m68k/m68k-none.h (TARGET_CPU_DEFAULT, M68K_CPU_m68k)
139 (M68K_CPU_m68000, M68K_CPU_m68010, M68K_CPU_m68020, M68K_CPU_m68030)
140 (M68K_CPU_m68040, M68K_CPU_m68302, M68K_CPU_m68332, TARGET_DEFAULT)
141 (ASM_CPU_DEFAULT_SPEC, CC1_CPU_DEFAULT_SPEC): Delete.
142 (ASM_SPEC): Remove use of %(asm_cpu_default).
143 (EXTRA_SPECS, SUBTARGET_EXTRA_SPECS, MULTILIB_DEFAULTS): Delete.
144 * config/m68k/linux.h (TARGET_DEFAULT): Delete.
145 (CPP_SPEC): Merge definitions. Do not handle __HAVE_68881__ here.
146 * config/m68k/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Define
147 __HAVE_FPU__ if TARGET_HARD_FLOAT.
148 (TARGET_DEFAULT): Delete.
149 (EXTRA_SPECS): Delete cpp_cpu_default_spec, cpp_cpu_spec,
150 cpp_fpu_spec, asm_default_spec and netbsd_cpp_spec.
151 (CPP_CPU_SPEC): Delete.
152 (TARGET_VERSION): Merge definitions, using TARGET_68010 to pick
153 the appropriate string.
154 (CPP_CPU_DEFAULT_SPEC, ASM_DEFAULT_SPEC, CPP_FPU_SPEC): Delete.
155 (CPP_SPEC): Define to NETBSD_CPP_SPEC.
156 (ASM_SPEC): Don't use %(asm_default_spec).
157 * config/m68k/m68k.c (TARGET_DEFAULT_TARGET_FLAGS): Remove
158 TARGET_DEFAULT and add MASK_68881.
159 * config/m68k/m68k.md: Remove mention of TARGET_DEFAULT from comments.
161 2007-01-12 Richard Sandiford <richard@codesourcery.com>
163 * config.gcc (m68010-*-netbsdelf*): Add MASK_68010.
164 (m68k*-*-netbsdelf*, m68k*-*-openbsd*, m68k*-linux*): Add
165 MASK_68010 alongside MASK_68020.
166 * doc/invoke.texi: Document -m68010.
167 * config/m68k/m68k.opt (m68010): New.
168 * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Define mc68010
170 (TUNE_68010): New macro.
171 * config/m68k/m68k-none.h (M68K_CPU_m68k, M68K_CPU_m68010)
172 (M68K_CPU_m68020, M68K_CPU_m68030, M68K_CPU_m68040)
173 (M68K_CPU_m68332): Add MASK_68010.
174 * config/m68k/linux.h (TARGET_DEFAULT): Add MASK_68010 to
176 * config/m68k/netbsd-elf.h (CPP_CPU_SPEC): Remove now-redundant
178 * config/m68k/m68k.c (MASK_ALL_CPU_BITS): Add MASK_68010.
179 (m68k_handle_option): Handle OPT_m68010. Add MASK_68010
180 to all entries that use MASK_68020.
181 (output_move_simode_const, output_move_himode, output_move_qimode)
182 (output_move_stricthi, output_move_strictqi): Use TARGET_68010
183 instead of TARGET_68020 to select clr behavior. Remove comment
184 about there being no TARGET_68010.
185 * config/m68k/m68k.md: Likewise throughout.
187 2007-01-12 Julian Brown <julian@codesourcery.com>
189 * config/m68k/m68k.h (TARGET_ISAB): New macro.
190 * config/m68k/m68k.c: Use TARGET_ISAB rather than TARGET_CFV4.
191 * config/m68k/m68k.md: Likewise.
193 2007-01-12 Julian Brown <julian@codesourcery.com>
195 * config/m68k/m68k.h (LEGITIMATE_INDEX_P, LEGITIMIZE_ADDRESS): Use
196 TARGET_COLDFIRE_FPU instead of TARGET_CFV4E.
198 2007-01-12 Julian Brown <julian@codesourcery.com>
200 * config/m68k/m68k.h (TUNE_68040_60): New macro.
201 * config/m68k/m68k.c (standard_68881_constant_p): Use it.
202 * config/m68k/m68k.md: Likewise.
204 2007-01-12 Julian Brown <julian@codesourcery.com>
205 Richard Sandiford <richard@codesourcery.com>
207 * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Use TUNE_68030
208 instead of TARGET_68030, TUNE_68040 instead of TARGET_68040,
209 TUNE_68060 instead of TARGET_68060 and TUNE_CPU32 instead of
211 (TARGET_CPU32): Rename to...
212 (TUNE_CPU32): ...this.
213 (TUNE_68000_10, TUNE_68030, TUNE_68040, TUNE_68060)
214 (TUNE_CFV2): New macros.
215 * config/m68k/netbsd-elf.h (LONG_DOUBLE_TYPE_SIZE): Simplify;
216 remove conditions that are implied by TARGET_68020.
217 * config/m68k/m68k.c (m68k_output_function_prologue): Use TUNE_68040
218 instead of TARGET_68040 and TUNE_CPU32 instead of TARGET_CPU32.
219 (m68k_output_function_epilogue): Likewise.
220 (m68k_rtx_costs): Likewise. Use TUNE_68060 instead of TARGET_68060
221 and TUNE_CFV2 instead of TARGET_5200. Use TUNE_68000_10 instead of
222 "!TARGET_68020 && !TARGET_COLDFIRE" to choose between 68000 and
223 non-68000 timings. Refactor multiplication and division costs.
224 (output_addsi3): Use TUNE_68040 instead of TARGET_68040 and
225 TUNE_CPU32 instead of TARGET_CPU32.
226 (standard_68881_constant_p): Use TUNE_68040 instead of TARGET_68040
227 and TUNE_68060 instead of TARGET_68060.
228 * config/m68k/m68k.md: Use TUNE_68040 instead of TARGET_68040,
229 TUNE_68060 instead of TARGET_68060, and TUNE_CPU32 instead of
231 (movsi_const0): Use TUNE_68000_10 rather than "!TARGET_68020
232 && !TARGET_COLDFIRE" to choose between moveq and clr.
233 Likewise in the unnamed movsf pattern.
234 (ashlsi_17_24, lshrsi_17_24): Guard with TUNE_68000_10 rather than
235 "!TARGET_68020 && !TARGET_COLDFIRE". Likewise the unnamed
238 2007-01-12 Richard Sandiford <richard@codesourcery.com>
240 * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Increase amount
241 of tabbing before backslashes.
243 2007-01-11 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
245 * pa-linux.h (ASM_OUTPUT_INTERNAL_LABEL): Undefine.
246 * pa.h (ASM_OUTPUT_LABEL): Output colon when using GAS.
247 (ASM_OUTPUT_INTERNAL_LABEL): Define.
249 2007-01-11 Zdenek Dvorak <dvorakz@suse.cz>
251 * tree-ssa-loop-ivopts.c (extract_cond_operands): Split from
252 find_interesting_uses_cond.
253 (find_interesting_uses_cond): Use extract_cond_operands.
254 (rewrite_use_compare): Use extract_cond_operands and
255 force_gimple_operand_bsi. Do not call update_stmt.
256 (determine_use_iv_cost_condition): Use extract_cond_operands.
257 Return cheaper of using original bound and changing the exit bound.
259 2007-01-11 Zdenek Dvorak <dvorakz@suse.cz>
261 PR tree-optimization/29516
262 * tree-ssa-address.c (tree_mem_ref_addr, add_to_parts,
263 most_expensive_mult_to_index, addr_to_parts,
264 create_mem_ref, maybe_fold_tmr): Make the type of
265 fields of TARGET_MEM_REF sizetype.
266 (move_fixed_address_to_symbol, move_pointer_to_base):
268 * tree.def (TARGET_MEM_REF): Add comment on types of
271 2007-01-11 Joseph Myers <joseph@codesourcery.com>
273 * c-common.c (vector_types_convertible_p): Treat opaque types as
274 always convertible if they have the same size, but not otherwise.
276 2007-01-11 Steven Bosscher <steven@gcc.gnu.org>
278 * ifcvt.c (struct noce_if_info): Add comments to the fields.
279 Remove the b_unconditional field.
280 (noce_try_sign_mask): Do not look at b_unconditional.
281 (noce_process_if_block): Do not use merge_if_blocks. Update
282 the CFG here. Do not set b_unconditional.
283 (cond_move_process_if_block): Likewise.
284 (find_cond_trap): Likewise.
285 (check_cond_move_block): Require simple jump insns at the end
288 2007-01-11 Jan Hubicka <jh@suse.cz>
290 PR tree-optimization/1046
291 * tree-tailcall.c (suitable_for_tail_call_opt_p): Use TREE_ADDRESSABLE
292 when alias info is not ready.
293 (pass_tail_recursion): Do not require aliasing.
294 * tree-ssa-copyrename.c (pass_rename_ssa_cop): Likewise.
295 * tree-ssa-ccp.c (pass_ccp, pass_fold_builtins): Likewise.
296 * tree-ssa-copy.c (pass_copy_prop): Likewise.
297 * tree-ssa-forwprop.c (pass_forwprop): Likewise.
298 * tree-ssa-dce.c (pass_dce, pass_dce_loop, pass_cd_dce): Likewise.
299 * passes.c (init_optimization_passes): Execute rename_ssa_copies,
300 ccp, forwprop, copy_prop, merge_phi, copy_prop, dce and tail recursion
302 * tree-ssa-operands.c (add_virtual_operand, get_indirect_ref_operand):
303 When aliasing is not build, mark statement as volatile.
305 2007-01-11 Tom Tromey <tromey@redhat.com>
307 PR preprocessor/15185, PR preprocessor/20989:
308 * doc/cppopts.texi <-MT>: Update description of algorithm for
309 computing default target.
310 <-M, -MD>: Reword "basename" text.
312 2007-01-11 Roger Sayle <roger@eyesopen.com>
314 * builtins.c (expand_builtin_pow, expand_builtin_powi,
315 fold_builtin_cabs, fold_builtin_sqrt, fold_builtin_trunc,
316 fold_builtin_floor, fold_builtin_ceil, fold_builtin_round,
317 fold_builtin_int_int_roundingfn, fold_builtin_bitop,
318 fold_builtin_bswap, real_constp, fold_builtin_pow,
319 fold_builtin_powi, fold_builtin_signbit, fold_builtin_copysign,
320 do_mpfr_arg1, do_mpfr_arg2, do_mpfr_arg3, do_mpfr_sincos): Replace
321 uses of the macro TREE_CONSTANT_OVERFLOW with TREE_OVERFLOW.
322 * convert.c (convert_to_pointer): Likewise.
323 * expr.c (highest_pow2_factor, expand_expr_real_1): Likewise.
324 * fold-const.c (force_fit_type, fold_negate_expr, int_const_binop,
325 const_binop, fold_convert_const_int_from_int,
326 fold_convert_const_int_from_real,
327 fold_convert_const_real_from_real, sign_bit_p,
328 optimize_minmax_comparison, extract_muldiv_1, fold_div_compare,
329 fold_sign_changed_comparison, fold_unary, fold_comparison,
330 fold_binary, multiple_of_p, tree_Expr_non_zero_p,
331 fold_negate_const, fold_abs_const, fold_not_const): Likewise.
332 * print-tree.c (print_node_brief, print_node): Likewise.
333 * stor-layout.c (place_field, layout_type): Likewise.
334 * tree-chrec.c (keep_cast): Likewise.
335 * tree.c (build_vector, build_real, build_real_from_int_cst,
336 build_complex): Likewise.
338 2007-01-11 Roger Sayle <roger@eyesopen.com>
340 * tree.h (TREE_CONSTANT_OVERFLOW): Obsolete. For the time being,
341 treat TREE_CONSTANT_OVERFLOW as a synonym of TREE_OVERFLOW.
343 2007-01-11 Paolo Bonzini <bonzini@gnu.org>
345 * configure.ac (strict1_warn): Rename to strict_warn.
346 (WERROR, --enable-werror, symlink hacks, stage1_cflags,
347 cc_set_by_configure, quoted_cc_set_by_configure,
348 stage_prefix_set_by_configure, quoted_stage_prefix_set_by_configure,
349 all_boot_languages, all_stagestuff): Remove.
350 (target_list): Remove bootstrap targets.
351 * Makefile.in (quickstrap): Unconditionally make a synonym of all.
352 (BOOT_LANGUAGES, STAGE1_CFLAGS, STAGE1_CHECKING,
353 REMAKEFLAGS, FLAGS_TO_PASS, PREPEND_DOTDOT_TO_RELATIVE_PATHS,
354 SUBDIR_FLAGS_TO_PASS, WERROR_FLAGS, STRICT2_WARN, LANG_STAGESTUFF,
355 VOL_FILES, POSTSTAGE1_FLAGS_TO_PASS, STAGE2_FLAGS_TO_PASS,
356 STAGEPROFILE_FLAGS_TO_PASS, STAGEFEEDBACK_FLAGS_TO_PASS, stage1_build,
357 stage1_copy, stage2_build, stage2_copy, stageprofile_build,
358 stageprofile_copy, stage3_build, stage3_copy, stagefeedback_build,
359 stagefeedback_copy, stage4_build, clean_s1, clean_sw, bootstrap,
360 bootstrap-lean, bootstrap2, bootstrap2-lean, bootstrap3,
361 bootstrap3-lean, bootstrap4, bootstrap4-lean, unstage1, unstage2,
362 unstage3, unstage4, unstageprofile, unstagefeedback, restage, restage2,
363 restage3, restage4, restageprofile, restagefeedback, bubbleestrap,
364 cleanstrap, unstrap, restrap, *compare, *compare3, *compare4,
365 *compare-lean, *compare3-lean, *compare4-lean, stage1-start, stage1,
366 stage2-start, stage2, stage3-start, stage3, stage4-start, stage4,
367 stageprofile-start, stageprofile, stagefeedback-start, stagefeedback,
368 risky-stage1, risky-stage2, risky-stage3, risky-stage4): Remove.
369 (ORDINARY_FLAGS_TO_PASS): Rename to FLAGS_TO_PASS.
370 (STAGECOPYSTUFF, STAGEMOVESTUFF): Consolidate into MOSTLYCLEANFILES.
371 (mostlyclean): Adjust.
372 (clean, distclean): Don't mention bootstrap stuff.
373 * configure: Regenerate.
374 * ada/config-lang.in, cp/config-lang.in, forttran/config-lang.in,
375 java/config-lang.in, objc/config-lang.in, objcp/config-lang.in,
376 treelang/config-lang.in (stagestuff): Remove.
377 * doc/sourcebuild.texi (stage1, stage2, stage3, stage4,
378 stageprofile, stagefeedback, stagestuff): Remove mention.
380 2007-01-11 Nick Clifton <nickc@redhat.com>
382 * config/mcore/predicates.md (mcore_general_movesrc_operand):
384 (mcore_general_movdst_operand): Do not accept CONST_INTs.
385 (mcore_arith_K_S_operand): Run the test for the S constraint not
386 the test for the M constraint.
387 (mcore_addsub_operand): Do not accept integer values that are
389 * config/mcore/mcore.md: Remove unused constraints from split.
390 (andsi3): Use HOST_WIDE_INT instead of int to hold an INTVAL.
392 (allocate_stack): Likewise.
393 * config/mcore/mcore.c (mcore_print_operand): Restrict output of P
395 (mcore_const_costs): Use HOST_WIDE_INT instead of int to hold an
397 (mcore_and_cost, mcore_modify_comparison, const_ok_for_mcore,
398 mcore_const_ok_for_inline, mcore_const_trick_uses_not,
399 try_constant_tricks, mcore_num_ones, mcore_num_zeros,
400 mcore_output_bclri, mcore_output_andn, output_inline_const,
401 mcore_output_move, mcore_output_movedouble): Likewise.
402 (mcore_output_cmov): Use CONST_OK_FOR_M and CONST_OK_FOR_N.
403 (output_inline_const): Likewise.
404 (output_inline_const): Fix format strings used in sprintf
406 * config/mcore/mcore-protos.h: Update prototypes for changed
407 functions in mcore.c.
408 * config/mcore/mcore.h (CONST_OK_FOR_I): Cast values to
409 HOST_WIDE_INT and not int.
410 (CONST_OK_FOR_J, CONST_OK_FOR_K, CONST_OK_FOR_L, CONST_OK_FOR_M,
411 CONST_OK_FOR_N): Likewise.
412 (LEGITIMATE_CONSTANT_P): Also check CONSTANT_P.
413 (GO_IF_LEGITIMATE_INDEX): Use HOST_WIDE_INT instead of int to hold
416 2007-01-10 Jan Hubicka <jh@suse.cz>
418 * tree-vrp.c (remove_range_assertions): Release defs.
419 * tree-ssa-loop-ivopts.c (rmeove_statement): Likewise.
420 * tree-ssa-dom.c (remove_stmt_or_phi): Likewise.
422 2007-01-10 Paul Brook <paul@codesourcery.com>
424 * config/arm/arm.c (arm_rtx_costs_1): Handle mutiply-subtract.
425 * config/arm/arm.md (mulsi3subsi): New insn.
427 2007-01-10 Zdenek Dvorak <dvorakz@suse.cz>
429 * tree-ssa-loop-manip.c (tree_unroll_loop): Make it a wrapper over ...
430 (tree_transform_and_unroll_loop): New.
431 * tree-flow.h (transform_callback, tree_transform_and_unroll_loop):
434 2007-01-10 Robert Kennedy <jimbob@google.com>
436 * fold-const.c (fold_comparison): Fold comparisons like (x *
437 1000 < 0) to (x < 0).
439 2007-01-10 Ian Lance Taylor <iant@google.com>
441 * tree-pretty-print.c (dump_generic_node): Print parentheses when
442 operands have the same priority.
444 2007-01-10 Tom Tromey <tromey@redhat.com>
446 * fold-const.c (fold_truthop): Don't check can_use_bit_fields_p.
447 (fold_binary): Likewise.
448 * langhooks.c (lhd_can_use_bit_fields_p): Removed.
449 * langhooks-def.h (lhd_can_use_bit_fields_p): Removed.
450 (LANG_HOOKS_CAN_USE_BIT_FIELDS_P): Removed.
451 (LANG_HOOKS_INITIALIZER): Remove LANG_HOOKS_CAN_USE_BIT_FIELDS_P.
452 * langhooks.h (struct lang_hooks): Removed field
453 'can_use_bit_fields_p'.
455 2007-01-10 Ralf Corsépius <ralf.corsepius@rtems.org>
457 * config/bfin/t-bfin, config/bfin/t-bfin-elf: Remove GCC_CFLAGS.
459 2007-01-10 Razya Ladelsky <razya@il.ibm.com>
461 * function.c (get_last_funcdef_no): New function.
462 * function.h (get_last_funcdef_no): Declare.
463 * tree-inline.c (initialize_cfun): Add initialization.
464 (tree_function_versioning): Cleanup.
466 2007-01-10 Jan Hubicka <jh@suse.cz>
468 * tree-inline.c (setup_one_parameter): Do not propagate into abnormal
471 2007-01-10 Sa Liu <saliu@de.ibm.com>
472 Ben Elliston <bje@au.ibm.com>
474 * spu.h (STACK_SAVE_AREA): Use VOIDmode for SAVE_FUNCTION, SImode
475 for SAVE_NONLOCAL and Pmode for any other save level.
476 * spu-protos.h (spu_restore_stack_block): Declare.
477 * spu.md (save_stack_block): Remove.
478 (restore_stack_block): Call spu_restore_stack_block.
479 * spu.c (spu_restore_stack_block): New function.
480 (spu_expand_epilogue): Remove old comment.
482 2007-01-09 Zdenek Dvorak <dvorakz@suse.cz>
484 PR tree-optimization/30322
485 * tree-ssa-loop-ivopts.c (fold_affine_expr, iv_value): Removed.
486 (cand_value_at): Return the value as aff_tree.
487 (may_eliminate_iv): Convert the bound from aff_tree to tree.
488 * tree-affine.c (aff_combination_add_cst, aff_combination_add_product,
489 aff_combination_mult): New functions.
490 (aff_combination_add): Use aff_combination_add_cst.
491 (aff_combination_convert): Allow conversions to a wider type.
492 (tree_to_aff_combination): Handle BIT_NOT_EXPR.
493 * tree-affine.h (aff_combination_mult): Declare.
495 2007-01-09 Carlos O'Donell <carlos@codesourcery.com>
497 * doc/tm.texi: Update documentation to reflect reality of exec
498 and start file search behaviours. Update copyright year.
499 * doc/invoke.texi: Explain how GCC_EXEC_PREFIX is used to find
500 header file directories.
502 2007-01-09 Uros Bizjak <ubizjak@gmail.com>
504 * config/i386/i386.md (*sinxf2): Rename to *sinxf2_i387.
505 (*cosxf2): Rename to cosxf2_i387.
507 (*sindf2, *sinsf2): Extend operand 1 to XFmode. Macroize patterns
508 using X87MODEF12 mode macro. Rename patterns to
509 *sin_extend<mode>xf2_i387. Use SSE_FLOAT_MODE_P to disable patterns
511 (*cosdf2, *cossf2): Ditto.
512 (sincosdf3, sincossf3): Ditto. Rewrite corresponding splitters
513 to match extended input operands.
515 (sincos<mode>3): New expander.
517 (*sinextendsfdf2, *cosextendsfdf2, *sincosextendsfdf3): Remove
518 insn patterns and corresponding splitters.
520 2007-01-09 Kaz Kojima <kkojima@gcc.gnu.org>
522 * config/sh/t-linux (TARGET_LIBGCC2_CFLAGS): Delete.
523 (SHLIB_MAPFILES, SHLIB_LINK, SHLIB_INSTALL): Likewise.
525 2007-01-09 Nicolas Pitre <nico@cam.org>
528 * arm/ieee754-df.S (Lad_s): Also test the low word of X for zero.
530 2007-01-08 Geoffrey Keating <geoffk@apple.com>
532 * target.h (struct gcc_target): New field library_rtti_comdat.
533 * target-def.h (TARGET_CXX_LIBRARY_RTTI_COMDAT): New.
534 (TARGET_CXX): Add TARGET_CXX_LIBRARY_RTTI_COMDAT.
535 * doc/tm.texi (C++ ABI): Document TARGET_CXX_LIBRARY_RTTI_COMDAT.
536 * config/darwin.h (TARGET_CXX_LIBRARY_RTTI_COMDAT): Define.
538 2007-01-08 Geoffrey Keating <geoffk@apple.com>
540 * doc/invoke.texi (Optimize Options): Correct description of -O0.
542 2007-01-08 Richard Guenther <rguenther@suse.de>
544 * tree.h (force_fit_type_double): Export.
545 (force_fit_type): Remove.
546 * fold-const.c (force_fit_type_double): New function.
547 (force_fit_type): Remove.
548 (int_const_binop): Use it.
549 (fold_convert_const_int_from_int): Likewise.
550 (fold_convert_const_int_from_real): Likewise.
551 (fold_div_compare): Likewise.
552 (fold_sign_changed_comparison): Likewise.
553 (fold_unary): Likewise.
554 (fold_negate_const): Likewise.
555 (fold_abs_const): Likewise.
556 (fold_not_const): Likewise.
557 * c-common.c (shorten_compare): Use force_fit_type_double.
558 * convert.c (convert_to_pointer): Likewise.
560 2007-01-08 Richard Guenther <rguenther@suse.de>
562 * tree.h (build_int_cst_wide_type): Export.
563 * tree.c (build_int_cst_wide_type): New function.
564 (build_int_cst_wide): Fix comment.
565 * builtins.c (fold_builtin_object_size): Use build_int_cst
566 to build -1 or 0 of the correct type. Use fit_double_type
567 to check for overflow.
568 * fold-const.c (optimize_bit_field_compare): Use build_int_cst_type
570 (decode_field_reference): Likewise.
571 (all_ones_mask_p): Likewise.
572 (native_interpret_int): Use build_int_cst_wide_type.
573 (fold_binary): Use build_int_cst_type to build an all-ones
575 * stor-layout.c (set_sizetype): Use build_int_cst_wide_type.
577 2007-01-08 Daniel Jacobowitz <dan@codesourcery.com>
579 * config/pa/t-pa64 (libgcc_stub.a): Use $(T).
581 2007-01-09 Ben Elliston <bje@au.ibm.com>
583 * genautomata.c (STATS_OPTION): New option.
584 (stats_flag): New flag.
585 (gen_automata_option): Handle it.
586 (initiate_automaton_gen): Ditto.
587 (write_automata): Output statistics only if stats_flag is
588 set. Likewise, output time statistics only if time_flag is set.
589 * doc/md.texi (Processor pipeline description): Document new flag.
591 2007-01-08 Richard Guenther <rguenther@suse.de>
593 * builtins.c (fold_builtin_int_roundingfn): Use fit_double_type.
594 * tree.c (build_int_cst_type): Likewise.
595 (size_in_bytes): Don't call force_fit_type on the result.
596 (int_fits_type_p): Use fit_double_type.
597 * fold-const.c (fit_double_type): New function.
598 (force_fit_type): Use it.
599 * tree.h (fit_double_type): Export.
601 2007-01-08 Jan Hubicka <jh@suse.cz>
603 * tree-vectorizer.c (gate_increase_alignment): Fix return type.
604 * ipa.c (function_and_variable_visibility): Fix return type.
606 2007-01-08 Richard Guenther <rguenther@suse.de>
608 * tree-ssa-ccp.c (maybe_fold_offset_to_array_ref): Use type
609 of offset to build the index.
610 * tree-pretty-print.c (dump_generic_node): Don't build negated
611 const just for printing.
612 * c-pretty-print.c (pp_c_integer_constant): Likewise.
613 * builtins.c (fold_builtin_int_roundingfn): Check if result
614 fits the type by using force_fit_type and comparing the result.
615 * predict.c (predict_loops): Use compare_tree_int for comparison.
616 * tree.c (build_int_cst): Fall back to integer_type_node for
618 (build_int_cst_wide): Assert type is non-null.
620 2007-01-08 Roberto Costa <roberto.costa@st.com>
622 * tree-vrp.c (extract_range_from_cond_expr): New.
623 (extract_range_from_expr): Handle COND_EXPR nodes used as expressions.
624 * tree-ssa-ccp.c (get_maxval_strlen): Handle COND_EXPR nodes used
626 (fold_stmt): Bug fix, avoid infinite recursion when folding COND_EXPRs.
627 * tree-ssa-forwprop.c (simplify_cond, forward_propagate_into_cond,
628 tree_ssa_forward_propagate_single_use_vars): Handle COND_EXPR nodes
630 * tree-object-size.c (cond_expr_object_size): New.
631 (collect_object_sizes_for): Handle COND_EXPR nodes used as expressions.
633 2007-01-08 Jan Hubicka <jh@suse.cz>
635 * tree-ssa-forwprop.c (forward_propagate_into_cond,
636 tree_ssa_forward_propagate_single_use_va): Release defs of propagated
639 2007-01-08 Richard Guenther <rguenther@suse.de>
641 PR tree-optimization/23603
642 * tree-vrp.c (set_value_range_to_truthvalue): New function.
643 (extract_range_from_binary): Fall back to truthvalue instead of
644 varying for TRUTH_*_EXPR.
645 (extract_range_from_comparison): Fall back to truthvalue instead of
647 (vrp_visit_phi_node): Don't adjust new range bounds to +INF/-INF
648 if all visited PHI values were constant.
650 2007-01-08 Jan Hubicka <jh@suse.cz>
652 * cgraphunit.c (cgraph_process_new_functions): Reset reachable flag.
653 (cgraph_analyze_function): break out from ...
654 (cgraph_finalize_compilation_unit): ... here.
655 (cgraph_expand_function): Remove forgoten commented out line.
656 (cgraph_optimize): Analyze functions.
658 2007-01-08 Jan Hubicka <jh@suse.cz>
660 * tree-pas.h (TODO_remove_function): New flag.
661 (TODO_update*): Renumber.
662 (pass_ipa_increase_alignment,
663 pass_ipa_function_and_variable_visibility): New passes.
664 * cgraphunit.c (cgraph_increase_alignment): Move to tree-vectorizer.c
665 (cgraph_function_and_variable_visibility): Move to ipa.c
666 (cgraph_optimize): Don't call cgraph_function_and_variable_visibility,
667 cgraph_increase_alignment.
668 * ipa-inline.c (cgraph_decide_inlining): Don't push timevar.
669 (cgraph_decide_inlining_incrementally): Push TV_INTEGRATION before
671 (cgraph_early_inlining): Do not call cgraph_remove_unreachable_nodes.
672 (pass_ipa_inline, pass_early_ipa_inlining): Set TODO_remove_functions
673 * tree-vectorizer.c (increase_alignment): Move here from cgraphunit.c
674 (gate_increase_alignment): New function.
675 (pass_ipa_increase_alignment): New pass.
676 * ipa.c: Inline tree-pass.h and timevar.h
677 (function_and_variable_visibility): Move here from cgraphunit.c
678 * tree-optimize.c (pass_early_local_passes): Add TODO_remove_functions.
679 * passes.c (init_optimization_passes): Add the two new passes.
680 (execute_todo): Handle cgraph_remove_functions.
682 2007-01-08 Nick Clifton <nickc@redhat.com>
684 * config/frv/predicates.md (reg_or_0_operand): Accept
687 2007-01-08 Ralf Corsépius <ralf.corsepius@rtems.org>
689 * config/bfin/rtems.h, config/bfin/t-rtems: New.
690 * config.gcc: Add bfin*-rtems*.
692 2007-01-08 Mark Shinwell <shinwell@codesourcery.com>
694 * c.opt: Add -flax-vector-conversions.
695 * c-typeck.c (convert_for_assignment): Pass flag to
696 vector_types_convertible_p to allow emission of note.
697 (digest_init): Likewise.
698 * c-opts.c: Handle -flax-vector-conversions.
699 * c-common.c (flag_lax_vector_conversions): New.
700 (vector_types_convertible_p): Unless -flax-vector conversions
701 has been passed, disallow conversions between vectors with
702 differing numbers of subparts and/or element types. If such
703 a conversion is disallowed, possibly emit a note on the first
704 occasion only to inform the user of -flax-vector-conversions.
705 The new last argument specifies this.
706 * c-common.h (flag_lax_vector_conversions): New.
707 (vector_types_convertible_p): Add extra argument.
708 * config/i386/i386.c (ix86_init_mmx_sse_builtins): Use
709 char_type_node for V*QI type vectors.
710 * config/rs6000/rs6000-c.c (altivec_overloaded_builtins):
711 Update to satisfy new typechecking rules.
712 * config/rs6000/altivec.h (vec_cmple): Use vec_cmpge, for both
714 * doc/invoke.texi (C Dialect Options): Document
715 -flax-vector-conversions.
717 2007-01-08 Mark Shinwell <shinwell@codesourcery.com>
719 PR tree-optimization/29877
720 * tree-ssa-ter.c (is_replaceable_p): Deem assignments with
721 a register variable on the RHS to not be replaceable.
723 2007-01-08 Chen Liqin <liqin@sunnorth.com.cn>
724 * config/score/t-score-elf (MULTILIB_OPTIONS): Change.
725 * config/score/predicates.md (const_uimm5, sr0_operand, const_simm12,
726 const_simm15, const_pow2, const_npow2): Added.
727 * config/score/misc.md (insv, extv, extzv, movmemsi,
728 move_lbu_a/b, mov_lhu_a/b etc): Added and fix some bug.
729 * config/score/score.c (score_address_cost, score_select_cc_mode):
731 Change CONST_OK_FOR_LETTER_P/EXTRA_CONSTRAINT define.
732 Update score_rtx_costs for MACRO TARGET_RTX_COSTS.
733 Update score_print_operand.
734 * config/score/score.h (DATA_ALIGNMENT, SELECT_CC_MODE): Added.
735 Adjust register allocate order and update some macro define.
736 * config/score/score-mdaux.c (mdx_unaligned_load, mdx_unsigned_store,
737 mdx_block_move_straight, mdx_block_move_loop_head,
738 mdx_block_move_loop_body, mdx_block_move_loop_foot, mdx_block_move_loop,
739 mdx_block_move): Added.
740 (mdx_movsicc, mdp_select_add_imm, mdp_select, mds_zero_extract_andi,
741 mdp_limm): Updated and fix some bug and typo.
742 * config/score/score.md (movqi/hi/si, add/sub/zero/ext): Updated.
743 (movsf, movdf, doloop_end): Added.
745 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
747 * config/arm/arm.c, config/arm/arm.h, config/arm/arm.md,
748 config/arm/thumb2.md: Fix comment typos.
749 * doc/extend.texi: Fix a typo.
751 2007-01-07 Eric Christopher <echristo@apple.com>
753 * configure.ac: Check for __stack_chk_fail for darwin.
754 * configure: Regenerate.
756 2007-01-07 Richard Guenther <rguenther@suse.de>
758 * tree-vrp.c (extract_range_from_assert): CSE calls to
759 compare_values where possible.
760 (extract_range_from_unary_expr): Likewise.
762 2007-01-07 Anatoly Sokolov <aesok@post.ru>
764 * config/avr/avr-protos.h (call_insn_operand): Delete prototype.
765 * config/avr/avr.c (call_insn_operand): Delete function.
766 * config/avr/avr.md (*pushqi, *pushhi, *pushsi, *pushsf): Use REG_SP
767 instead of register number. Use predicates.
768 * config/avr/predicates.md (const0_operand, reg_or_0_operand,
769 call_insn_operand): Add.
771 2007-01-06 Jan Hubicka <jh@suse.cz>
773 * tree-pass.h (pass_build_cgraph_edges): Declare.
774 * cgraphunit.c (record_refernece): Move to cgraphbuild.c
775 (visited_nodes): Remove.
776 (cgraph_create_edges): Move to cgraphbuild.c; rename to
777 build_cgrpah_edges; make visited_nodes local.
778 (cgraph_process_new_functions): DO not call initialize_inline_failed.
779 (record_references_in_initializer): Move to cgraphbuild.c
780 (initialize_inline_failed, rebuild_cgraph_edges,
781 pass_rebuild_cgraph_edges): Move to cgraphbuild.c.
782 (verify_cgraph_node): Make visited_nodes local.
783 (cgraph_analyze_function): Do not call cgraph_create_edges and
784 initialize_inline_failed.
785 (cgraph_expand_function): Do not call cgraph_lower_function;
786 assert that function is already lowered.
787 * Makefile.in (cgraphbuild.o): New.
788 * passes.c (init_optimization_passes): Add pass_build_cgraph_edges
789 at the end of lowering passes.
791 2007-01-06 Steven Bosscher <steven@gcc.gnu.org>
793 * ifcvt.c (cond_move_convert_if_block): New function, code
795 (cond_move_process_if_block): ...here. Call the new function
796 on the THEN and ELSE blocks.
797 (merge_if_block): Do not copy global_live_at_end, merge_blocks
798 already takes care of this.
800 2007-01-05 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
803 * tree.h (TREE_OVERFLOW_P): New.
804 * c-typeck.c (parser_build_unary_op): Warn only if result
805 overflowed and operands did not.
806 (parser_build_binary_op): Likewise.
807 (convert_for_assignment): Remove redundant overflow_warning.
808 * c-common.c (overflow_warning): Don't check or set TREE_OVERFLOW.
810 2007-01-05 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
812 * c-typeck.c (store_init_value): Split over two lines to follow
813 the GNU coding style.
815 2007-01-05 Benjamin Kosnik <bkoz@redhat.com>
817 * c-cppbuiltin.c (c_cpp_builtins): __GXX_EXPERIMENTAL_CPP0X__ to
818 __GXX_EXPERIMENTAL_CXX0X__.
819 * doc/cpp.texi: Same.
821 2007-01-05 Richard Guenther <rguenther@suse.de>
824 * tree.c (get_narrower): Do not construct COMPONENT_REFs
825 with mismatched types. Instead explicitly build a
828 2007-01-05 Ian Lance Taylor <iant@google.com>
830 * c-common.c (decl_with_nonnull_addr_p): New function.
831 (c_common_truthvalue_conversion): Call it.
832 * c-typeck.c (build_binary_op): Likewise.
833 * c-common.h (decl_with_nonnull_addr_p): Declare.
835 2007-01-05 Jakub Jelinek <jakub@redhat.com>
838 * libgcc2.c (__divdc3): Compare c and d against 0.0 instead of
841 2007-01-05 Joel Brobecker <brobecker@adacore.com>
843 * doc/install.texi (Final install): Document the fact that
844 the GNAT runtime should not be stripped.
846 2007-01-04 Jan Hubicka <jh@suse.cz>
848 * tree-inline.c (fold_marked_statements): Update operand caches
851 2007-01-04 Ian Lance Taylor <iant@google.com>
853 * c-common.c (check_function_nonnull): Whitespace fix.
855 2007-01-04 Jan Hubicka <jh@suse.cz>
857 * tree-optimize.c (execute_fixup_cfg): Correct previously mistakely
858 comitted older version of patch.
859 (pass_fixup_cfg): Add TODOs to verify flow and statements, dump
860 function, celanup cfg and collect garbage.
862 2007-01-04 Mike Stump <mrs@apple.com>
864 * Makefile.in (mostlyclean): Don't remove libgcc anymore.
867 2007-01-04 Eric Christopher <echristo@apple.com>
869 * libgcc2.c (__bswapsi2): Use SItype.
870 (__bswapdi2): Use DItype.
871 * libgcc2.h: Update for above.
873 2007-01-04 Paul Brook <paul@codesourcery.com>
875 * config/arm/arm.md (arm_mulsi3, thumb_mulsi3, mulsi3_compare0,
876 mulsi_compare0_scratch, mulsi3addsi, mulsi3addsi_compare0,
877 mulsi3addsi_compare0_scratch, mulsidi3adddi, mulsidi3,
878 umulsidi3, umulsidi3adddi, smulsi3_highpart,
879 umulsi3_highpart): Make conditional on !arm_arch6.
880 (arm_mulsi3_v6, thumb_mulsi3_v6, mulsi3_compare0_v6,
881 mulsi_compare0_scratch_v6, mulsi3addsi_v6, mulsi3addsi_compare0_v6,
882 mulsi3addsi_compare0_scratch_v6, mulsidi3adddi_v6, mulsidi3_v6,
883 umulsidi3_v6, umulsidi3adddi_v6, smulsi3_highpart_v6,
884 umulsi3_highpart_v6): New insns.
886 2007-01-04 Roger Sayle <roger@eyesopen.com>
888 * fold-const.c (fold_convert): When casting an expression to void,
889 fold_ignored_result may discover a GIMPLE_MODIFY_STMT which doesn't
890 have a type. Instead of attempting to build a NOP_EXPR, return
891 these "special" trees directly.
893 2007-01-04 Joseph Myers <joseph@codesourcery.com>
895 * config/rs6000/rs6000.c (rs6000_rtx_costs): Make adjustment for
896 MULT inside MINUS as either argument. Use rs6000_cost->dmul -
897 rs6000_cost->fp not 0 as adjustment for outer NEG.
899 2007-01-04 Jan Hubicka <jh@suse.cz>
901 * cgraph.c (cgraph_release_function_body): New function.
902 (cgraph_remove_node): Use it.
903 * cgraph.h (cgraph_release_function_body): Declare.
904 * cgraphunit.c (cgraph_expand_function): Use it.
905 * ipa.c (cgraph_remove_unreahchable_nodes): Use it.
906 * tree-ssa.c (delete_tree_ssa): Allow to be called before aliasing
907 is initialized and while compilation of other function is running.
908 * tree-optimize.c (execute_free_cfg_annotations): Move code to clear
909 statement CFG annotations from here to ...
910 * tree-cfg.c (delete_tree_cfg_annotations): ... here.
912 2007-01-04 Zdenek Dvorak <dvorakz@suse.cz>
914 * cfgloop.h (enum li_flags): Make the constants powers of two.
916 2007-01-04 Jan Hubicka <jh@suse.cz>
918 * tree-inline.c (copy_bb): Insert new statements to statements_to_fold
920 (fold_marked_statements): New function.
921 (optimize_inline_calls, tree_function_versioning): Fold new statements.
922 * tree-inline.h (copy_body_data): Add statements_to_fold.
924 2007-01-03 Daniel Jacobowitz <dan@codesourcery.com>
926 * config.gcc: Mention libgcc/config.host.
927 * Makefile.in: Update comments mentioning libgcc.
928 (LIBGCC, INSTALL_LIBGCC, GCC_PARTS, mklibgcc): Delete.
929 (all.cross, start.encap, rest.encap, rest.cross): Update
930 dependencies for libgcc move.
931 (libgcc.mk, LIBGCC_DEPS, libgcov.a, libgcc.a, stmp-multilib)
932 (clean-target, clean-target-libgcc): Delete.
933 (srcdirify, GCC_EXTRA_PARTS): New macros.
934 (libgcc-support, libgcc.mvars): New rules.
935 (distclean): Remove mention of mklibgcc.
936 (install): Don't reference INSTALL_LIBGCC.
937 (install-common): Don't reference EXTRA_PARTS.
938 (install-libgcc, install-multilib): Delete rules.
939 * mklibgcc.in: Delete file.
940 * doc/configfiles.texi: Don't mention mklibgcc.
942 * config/i386/t-darwin (SHLIB_VERPFX): Delete (moved to libgcc).
943 * config/i386/t-darwin64 (SHLIB_VERPFX): Likewise.
944 * config/rs6000/t-darwin (SHLIB_VERPFX): Likewise.
945 * config/rs6000/t-ppccomm (TARGET_LIBGCC2_CFLAGS, SHLIB_MAPFILES)
946 (mklibgcc, ldblspecs): Likewise.
948 * config/i386/t-nwld (libgcc.def, libc.def, libpcre.def)
949 (posixpre.def): Use $(T).
950 (SHLIB_EXT, SHLIB_NAME, SHLIB_SLIBDIR_QUAL, SHLIB_DEF, SHLIB_MAP)
951 (SHLIB_SRC, SHLIB_INSTALL): Delete.
952 (SHLIB_LINK): Make dummy.
953 * config/t-slibgcc-darwin: Delete contents except for dummy SHLIB_LINK.
955 * config/frv/t-linux (EXTRA_MULTILIB_PARTS): Clear.
957 * config/alpha/t-crtfm: Use $(T) in rules for EXTRA_PARTS.
958 * config/alpha/t-vms, config/alpha/t-vms64, config/fr30/t-fr30,
959 config/i386/t-rtems-i386, config/ia64/t-ia64, config/rs6000/t-beos,
960 config/rs6000/t-newas, config/sparc/t-elf: Likewise.
962 * configure.ac (all_outputs): Remove mklibgcc.
963 * configure: Regenerated.
965 2007-01-03 Josh Conner <jconner@apple.com>
968 * calls.c (compute_argument_addresses): Set stack and stack_slot
969 for partial args, too.
970 (store_one_arg): Use locate.size.constant for the size when
971 generating a save_area.
973 2007-01-03 Robert Kennedy <jimbob@google.com>
975 * tree-cfg.c (tree_merge_blocks): Release SSA_NAME phi results
976 whose definitions are deleted due to basic block merging.
978 2007-01-03 Paul Brook <paul@codesourcery.com>
981 * config/arm/arm.c (output_return_instruction): Pop PC in interrupt
983 (use_return_insn): Return 0 for Thumb interrupt functions.
984 (print_multi_reg): Add rfe argument for IRQ returns.
985 (arm_output_epilogue): Pop interrupt return address directly into PC.
986 (arm_expand_prologue): Only adjust IRQ return address in Arm mode.
988 2007-01-03 Paul Brook <paul@codesourcery.com>
990 Merge from sourcerygxx-4_1.
991 * config/arm/thumb2.md: New file.
992 * config/arm/elf.h (JUMP_TABLES_IN_TEXT_SECTION): Return True for
994 * config/arm/coff.h (JUMP_TABLES_IN_TEXT_SECTION): Ditto.
995 * config/arm/aout.h (ASM_OUTPUT_ADDR_VEC_ELT): Add !Thumb-2 assertion.
996 (ASM_OUTPUT_ADDR_DIFF_ELT): Output Thumb-2 jump tables.
997 * config/arm/aof.h (ASM_OUTPUT_ADDR_DIFF_ELT): Output Thumb-2 jump
999 (ASM_OUTPUT_ADDR_VEC_ELT): Add !Thumb-2 assertion.
1000 * config/arm/ieee754-df.S: Use macros for Thumb-2/Unified asm
1002 * config/arm/ieee754-sf.S: Ditto.
1003 * config/arm/arm.c (thumb_base_register_rtx_p): Rename...
1004 (thumb1_base_register_rtx_p): ... to this.
1005 (thumb_index_register_rtx_p): Rename...
1006 (thumb1_index_register_rtx_p): ... to this.
1007 (thumb_output_function_prologue): Rename...
1008 (thumb1_output_function_prologue): ... to this.
1009 (thumb_legitimate_address_p): Rename...
1010 (thumb1_legitimate_address_p): ... to this.
1011 (thumb_rtx_costs): Rename...
1012 (thumb1_rtx_costs): ... to this.
1013 (thumb_compute_save_reg_mask): Rename...
1014 (thumb1_compute_save_reg_mask): ... to this.
1015 (thumb_final_prescan_insn): Rename...
1016 (thumb1_final_prescan_insn): ... to this.
1017 (thumb_expand_epilogue): Rename...
1018 (thumb1_expand_epilogue): ... to this.
1019 (arm_unwind_emit_stm): Rename...
1020 (arm_unwind_emit_sequence): ... to this.
1021 (thumb2_legitimate_index_p, thumb2_legitimate_address_p,
1022 thumb1_compute_save_reg_mask, arm_dwarf_handle_frame_unspec,
1023 thumb2_index_mul_operand, output_move_vfp, arm_shift_nmem,
1024 arm_save_coproc_regs, thumb_set_frame_pointer, arm_print_condition,
1025 thumb2_final_prescan_insn, thumb2_asm_output_opcode, arm_output_shift,
1026 thumb2_output_casesi): New functions.
1027 (TARGET_DWARF_HANDLE_FRAME_UNSPEC): Define.
1028 (FL_THUMB2, FL_NOTM, FL_DIV, FL_FOR_ARCH6T2, FL_FOR_ARCH7,
1029 FL_FOR_ARCH7A, FL_FOR_ARCH7R, FL_FOR_ARCH7M, ARM_LSL_NAME,
1030 THUMB2_WORK_REGS): Define.
1031 (arm_arch_notm, arm_arch_thumb2, arm_arch_hwdiv, arm_condexec_count,
1032 arm_condexec_mask, arm_condexec_masklen)): New variables.
1033 (all_architectures): Add armv6t2, armv7, armv7a, armv7r and armv7m.
1034 (arm_override_options): Check new CPU capabilities.
1035 Set new architecture flag variables.
1036 (arm_isr_value): Handle v7m interrupt functions.
1037 (user_return_insn): Return 0 for v7m interrupt functions. Handle
1039 (const_ok_for_arm): Handle Thumb-2 constants.
1040 (arm_gen_constant): Ditto. Use movw when available.
1041 (arm_function_ok_for_sibcall): Return false for v7m interrupt
1043 (legitimize_pic_address, arm_call_tls_get_addr): Handle Thumb-2.
1044 (thumb_find_work_register, arm_load_pic_register,
1045 legitimize_tls_address, arm_address_cost, load_multiple_sequence,
1046 emit_ldm_seq, emit_stm_seq, arm_select_cc_mode, get_jump_table_size,
1047 print_multi_reg, output_mov_long_double_fpa_from_arm,
1048 output_mov_long_double_arm_from_fpa, output_mov_double_fpa_from_arm,
1049 output_mov_double_fpa_from_arm, output_move_double,
1050 arm_compute_save_reg_mask, arm_compute_save_reg0_reg12_mask,
1051 output_return_instruction, arm_output_function_prologue,
1052 arm_output_epilogue, arm_get_frame_offsets, arm_regno_class,
1053 arm_output_mi_thunk, thumb_set_return_address): Ditto.
1054 (arm_expand_prologue): Handle Thumb-2. Use arm_save_coproc_regs.
1055 (arm_coproc_mem_operand): Allow POST_INC/PRE_DEC.
1056 (arithmetic_instr, shift_op): Use arm_shift_nmem.
1057 (arm_print_operand): Use arm_print_condition. Handle '(', ')', '.',
1059 (arm_final_prescan_insn): Use extract_constrain_insn_cached.
1060 (thumb_expand_prologue): Use thumb_set_frame_pointer.
1061 (arm_file_start): Output directive for unified syntax.
1062 (arm_unwind_emit_set): Handle stack alignment instruction.
1063 * config/arm/lib1funcs.asm: Remove default for __ARM_ARCH__.
1064 Add v6t2, v7, v7a, v7r and v7m.
1065 (RETLDM): Add Thumb-2 code.
1066 (do_it, shift1, do_push, do_pop, COND, THUMB_SYNTAX): New macros.
1067 * config/arm/arm.h (TARGET_CPU_CPP_BUILTINS): Define __thumb2__.
1068 (TARGET_THUMB1, TARGET_32BIT, TARGET_THUMB2, TARGET_DSP_MULTIPLY,
1069 TARGET_INT_SIMD, TARGET_UNIFIED_ASM, ARM_FT_STACKALIGN, IS_STACKALIGN,
1070 THUMB2_TRAMPOLINE_TEMPLATE, TRAMPOLINE_ADJUST_ADDRESS,
1071 ASM_OUTPUT_OPCODE, THUMB2_GO_IF_LEGITIMATE_ADDRESS,
1072 THUMB2_LEGITIMIZE_ADDRESS, CASE_VECTOR_PC_RELATIVE,
1073 CASE_VECTOR_SHORTEN_MODE, ADDR_VEC_ALIGN, ASM_OUTPUT_CASE_END,
1074 ADJUST_INSN_LENGTH): Define.
1075 (TARGET_REALLY_IWMMXT, TARGET_IWMMXT_ABI, CONDITIONAL_REGISTER_USAGE,
1076 STATIC_CHAIN_REGNUM, HARD_REGNO_NREGS, INDEX_REG_CLASS,
1077 BASE_REG_CLASS, MODE_BASE_REG_CLASS, SMALL_REGISTER_CLASSES,
1078 PREFERRED_RELOAD_CLASS, SECONDARY_OUTPUT_RELOAD_CLASS,
1079 SECONDARY_INPUT_RELOAD_CLASS, LIBCALL_VALUE, FUNCTION_VALUE_REGNO_P,
1080 TRAMPOLINE_SIZE, INITIALIZE_TRAMPOLINE, HAVE_PRE_INCREMENT,
1081 HAVE_POST_DECREMENT, HAVE_PRE_DECREMENT, HAVE_PRE_MODIFY_DISP,
1082 HAVE_POST_MODIFY_DISP, HAVE_PRE_MODIFY_REG, HAVE_POST_MODIFY_REG,
1083 REGNO_MODE_OK_FOR_BASE_P, LEGITIMATE_CONSTANT_P,
1084 REG_MODE_OK_FOR_BASE_P, REG_OK_FOR_INDEX_P, GO_IF_LEGITIMATE_ADDRESS,
1085 LEGITIMIZE_ADDRESS, THUMB2_LEGITIMIZE_ADDRESS,
1086 GO_IF_MODE_DEPENDENT_ADDRESS, MEMORY_MOVE_COST, BRANCH_COST,
1087 ASM_APP_OFF, ASM_OUTPUT_CASE_LABEL, ARM_DECLARE_FUNCTION_NAME,
1088 FINAL_PRESCAN_INSN, PRINT_OPERAND_PUNCT_VALID_P,
1089 PRINT_OPERAND_ADDRESS): Adjust for Thumb-2.
1090 (arm_arch_notm, arm_arch_thumb2, arm_arch_hwdiv): New declarations.
1091 * config/arm/arm-cores.def: Add arm1156t2-s, cortex-a8, cortex-r4 and
1093 * config/arm/arm-tune.md: Regenerate.
1094 * config/arm/arm-protos.h: Update prototypes.
1095 * config/arm/vfp.md: Enable patterns for Thumb-2.
1096 (arm_movsi_vfp): Add movw alternative. Use output_move_vfp.
1097 (arm_movdi_vfp, movsf_vfp, movdf_vfp): Use output_move_vfp.
1098 (thumb2_movsi_vfp, thumb2_movdi_vfp, thumb2_movsf_vfp,
1099 thumb2_movdf_vfp, thumb2_movsfcc_vfp, thumb2_movdfcc_vfp): New.
1100 * config/arm/libunwind.S: Add Thumb-2 code.
1101 * config/arm/constraints.md: Update include Thumb-2.
1102 * config/arm/ieee754-sf.S: Add Thumb-2/Unified asm support.
1103 * config/arm/ieee754-df.S: Ditto.
1104 * config/arm/bpabi.S: Ditto.
1105 * config/arm/t-arm (MD_INCLUDES): Add thumb2.md.
1106 * config/arm/predicates.md (low_register_operand,
1107 low_reg_or_int_operand, thumb_16bit_operator): New.
1108 (thumb_cmp_operand, thumb_cmpneg_operand): Rename...
1109 (thumb1_cmp_operand, thumb1_cmpneg_operand): ... to this.
1110 * config/arm/t-arm-elf: Add armv7 multilib.
1111 * config/arm/arm.md: Update patterns for Thumb-2 and Unified asm.
1113 (UNSPEC_STACK_ALIGN, ce_count): New.
1114 (arm_incscc, arm_decscc, arm_umaxsi3, arm_uminsi3,
1115 arm_zero_extendsidi2, arm_zero_extendqidi2): New
1117 * config/arm/fpa.md: Update patterns for Thumb-2 and Unified asm.
1118 (thumb2_movsf_fpa, thumb2_movdf_fpa, thumb2_movxf_fpa,
1119 thumb2_movsfcc_fpa, thumb2_movdfcc_fpa): New insns.
1120 * config/arm/cirrus.md: Update patterns for Thumb-2 and Unified asm.
1121 (cirrus_thumb2_movdi, cirrus_thumb2_movsi_insn,
1122 thumb2_cirrus_movsf_hard_insn, thumb2_cirrus_movdf_hard_insn): New
1124 * doc/extend.texi: Document ARMv7-M interrupt functions.
1125 * doc/invoke.texi: Document Thumb-2 new cores+architectures.
1127 2007-01-03 Jakub Jelinek <jakub@redhat.com>
1129 * unwind-dw2.c (SIGNAL_FRAME_BIT, EXTENDED_CONTEXT_BIT): Define.
1130 (struct _Unwind_Context): Rename args_size to flags, remove
1131 signal_frame field, add a new args_size field and version field.
1132 (_Unwind_IsSignalFrame, _Unwind_SetSignalFrame,
1133 _Unwind_IsExtendedContext): New inline functions.
1134 (_Unwind_GetGR, _Unwind_SetGR, _Unwind_GetGRPtr, _Unwind_SetGRPtr):
1135 Assume by_value array is only present if _Unwind_IsExtendedContext.
1136 (_Unwind_GetIPInfo, execute_cfa_program, uw_frame_state_for): Use
1137 _Unwind_IsSignalFrame.
1138 (__frame_state_for): Initialize context.flags to EXTENDED_CONTEXT_BIT.
1139 (uw_update_context_1): Use _Unwind_SetSignalFrame.
1140 (uw_init_context_1): Initialize context->flags to
1141 EXTENDED_CONTEXT_BIT.
1142 * config/rs6000/linux-unwind.h (frob_update_context): Use
1143 _Unwind_SetSignalFrame.
1145 2007-01-03 Andrew Pinski <andrew_pinski@playstation.sony.com>
1148 * gimplify.c (gimplify_modify_expr_complex_part): Move below
1149 tree_to_gimple_tuple. Call tree_to_gimple_tuple when we need
1152 2007-01-03 Kazu Hirata <kazu@codesourcery.com>
1154 * config/i386/i386.h (NON_STACK_REG_P, REGNO_OK_FOR_SIREG_P,
1155 REGNO_OK_FOR_DIREG_P, REWRITE_ADDRESS, ASM_OPERAND_LETTER,
1156 RET, AT_SP): Remove.
1157 * config/i386/i386.md (*sse_prologue_save_insn): Use return
1160 * alias.c (init_alias_analysis): Use VEC_safe_grow_cleared.
1161 * cfgbuild.c (find_basic_blocks): Likewise.
1162 * cfgrtl.c (rtl_create_basic_block): Likewise.
1163 * function.c (temp_slots_at_level): Likewise.
1164 * reg-stack.c (stack_regs_mentioned): Likewise.
1165 * regclass.c (allocate_reg_info): Likewise.
1166 * tree-cfg.c (init_empty_tree_cfg, build_tree_cfg, create_bb,
1167 set_bb_for_stmt, move_block_to_fn): Likewise.
1168 * tree-complex.c (tree_lower_complex): Likewise.
1169 * vec.h (VEC_safe_grow_cleared): New.
1171 * cgraphunit.c, tree-ssa-alias.c: Fix comment typos.
1173 2007-01-03 Zdenek Dvorak <dvorakz@suse.cz>
1175 * loop-unswitch.c (unswitch_loop): Pass probabilities to loopify.
1176 * tree-ssa-loop-unswitch.c (tree_unswitch_loop): Pass probabilities
1178 * cfgloopmanip.c (scale_loop_frequencies): Export.
1179 (loopify): Scale the frequencies by prescribed coefficients.
1180 (set_zero_probability): New function.
1181 (duplicate_loop_to_header_edge): Improve updating of frequencies.
1182 (lv_adjust_loop_entry_edge, loop_version): Set probabilities
1183 and frequencies according to arguments.
1184 * tree-ssa-loop-manip.c (tree_unroll_loop): Set probabilities
1186 * cfg.c (scale_bbs_frequencies_int): Allow scaling the frequencies up.
1187 * modulo-sched.c (sms_schedule): Set probabilities for entering
1188 versioned loop correctly.
1189 * tree-vect-transform.c (vect_transform_loop): Ditto.
1190 * cfgloop.h (loopify, loop_version): Declaration changed.
1191 (scale_loop_frequencies): Declared.
1193 2007-01-02 Jan Hubicka <jh@suse.cz>
1195 * cgraph.c: Include tree-flow.h
1196 (cgraph_add_new-function): Handle IPA_SSA mode; execute
1198 * cgraph.h (enum cgraph_state): Add CGRAPH_STATE_IPA_SSA.
1199 * tree-pass.h (pass_all_early_optimizations): Declare.
1200 * cgraphunit.c (cgraph_process_new_functions): Add IPA_SSA; execute
1202 (cgraph_analyze_function): Do early_local_passes.
1203 * tree-mudflap.c (mf_decl_cache_locals, mf_build_check_statement_for):
1204 Do not add referenced vars.
1205 * tree-optimize.c (gate_all_optimizations): Do not execute when not in
1207 (gate_all_early_local_passes): New gate.
1208 (pass_early_local_passes): Use new gate.
1209 (execute_early_local_optimizations): New functions.
1210 (gate_all_early_optimizations): New gate.
1211 (pass_all_early_optimizations): New pass.
1212 (execute_free_datastructures): Free SSA only when initialized.
1213 (gate_init_datastructures): Init only when optimizing.
1214 (tree_lowering_passes): Do early local passes when called late.
1215 * tree-profile.c (do_tree_profiling): Don't profile functions added
1217 (do_early_tree_profiling, pass_early_tree_profile): Kill.
1218 * tree-cfg.c (update_modified_stmts): Do not update when operands are
1220 * passes.c (init_optimizations_passes): Reorder so we go into SSA
1221 during early_local_passes.
1222 * Makefile.in (cgraph.o): Add dependency on tree-flow.h.
1225 2007-01-02 Carlos O'Donell <carlos@codesourcery.com>
1227 * Makefile.in: Update copyright year.
1229 2007-01-02 Carlos O'Donell <carlos@codesourcery.com>
1231 * Makefile.in: Export GCC_EXEC_PREFIX before calling $(RUNTEST)
1232 in $(lang_checks) and check-consistency targets.
1234 2007-01-02 Jan Hubicka <jh@suse.cz>
1236 * tree-mudflap.c (mf_decl_cache_locals, mf_build_check_statement_for):
1237 Do not add referenced vars.
1238 * tree-cfg.c (update_modified_stmts): Do not update when SSA operands
1240 * passes.c (init_optimization_passes): Put mudflap_2 after
1241 free_datastructures.
1243 2007-01-02 Jan Hubicka <jh@suse.cz>
1245 * tree-optimize (execute_fixup_cfg): Set after_inlining flag.
1246 Set NOTHROW flag on call statements proved to be nothrow.
1247 Update statement of local calls so new pure/const functions are
1248 updated. Update_ssa when in ssa form. Mark PHI nodes of nonlocal
1250 (tree_rest_of_compilation): Register hooks and initialize bitmap
1251 early. Do not set after_inlining flag.
1253 2007-01-02 Steve Ellcey <sje@cup.hp.com>
1255 * sbitmap.c (HOST_BITS_PER_LONG_LONG): Change to
1256 HOST_BITS_PER_LONGLONG
1258 2007-01-02 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
1261 * c-typeck.c (store_init_value): Don't emit pedantic overflow
1262 warning for non-static initializers.
1264 2007-01-02 Steven Bosscher <steven@gcc.gnu.org>
1266 * config/alpha/alpha.md, arm/arm.c, darwin.c, frv/frv.md,
1267 m32r/m32r.c, m32r/m32r.c, mn10300/mn10300.md, pa/pa.c,
1268 rs6000/rs6000.c, s390/s390.md, sh/sh.md, sparc/sparc.c:
1269 Always use set_unique_reg_note to add REG_EQUAL notes.
1271 2007-01-02 Kazu Hirata <kazu@codesourcery.com>
1274 2007-01-02 Kazu Hirata <kazu@codesourcery.com>
1276 * alias.c (init_alias_analysis): Use VEC_safe_grow_cleared.
1277 * cfgbuild.c (find_basic_blocks): Likewise.
1278 * cfgrtl.c (rtl_create_basic_block): Likewise.
1279 * function.c (temp_slots_at_level): Likewise.
1280 * reg-stack.c (stack_regs_mentioned): Likewise.
1281 * regclass.c (allocate_reg_info): Likewise.
1282 * tree-cfg.c (init_empty_tree_cfg, build_tree_cfg, create_bb,
1283 set_bb_for_stmt, move_block_to_fn): Likewise.
1284 * tree-complex.c (tree_lower_complex): Likewise.
1285 * vec.h (VEC_safe_grow_cleared): New.
1287 2007-01-02 Ian Lance Taylor <iant@google.com>
1289 * c-common.c (c_common_truthvalue_conversion): When warning about
1290 using an assignment as a truth value, set TREE_NO_WARNING.
1292 2007-01-02 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
1295 * c.opt (Wold-style-declaration): New.
1296 * doc/invoke.texi (C-only Warning Options): New.
1297 (Wold-style-declaration): Document it.
1298 (Wextra): Enabled by -Wextra.
1299 * c-opts.c (c_common_post_options): Enabled by -Wextra.
1300 * c-decl.c (declspecs_add_scspec): Replace -Wextra with
1301 -Wold-style-declaration.
1303 2007-01-02 Kazu Hirata <kazu@codesourcery.com>
1305 * alias.c (init_alias_analysis): Use VEC_safe_grow_cleared.
1306 * cfgbuild.c (find_basic_blocks): Likewise.
1307 * cfgrtl.c (rtl_create_basic_block): Likewise.
1308 * function.c (temp_slots_at_level): Likewise.
1309 * reg-stack.c (stack_regs_mentioned): Likewise.
1310 * regclass.c (allocate_reg_info): Likewise.
1311 * tree-cfg.c (init_empty_tree_cfg, build_tree_cfg, create_bb,
1312 set_bb_for_stmt, move_block_to_fn): Likewise.
1313 * tree-complex.c (tree_lower_complex): Likewise.
1314 * vec.h (VEC_safe_grow_cleared): New.
1316 2007-01-02 Douglas Gregor <doug.gregor@gmail.com>
1318 * c-common.c(c_common_nodes_and_builtins): Since variants of
1319 void_type_node get built before it is given a name, we need to
1320 give those variants the name, too.
1321 (complete_array_type): We need to work with the canonical main
1322 type of the array, from which we will build the qualified version.
1323 * params.def (PARAM_VERIFY_CANONICAL_TYPES): New.
1324 * print-tree.c (print_node): Display canonical type information
1326 * stor-layout.c (layout_type): When we don't know the
1327 alignment of a type for which we're building an array, we end up
1328 guessing wrong, so make the type require structural equality.
1329 * tree.c (make_node_stat): When we build a new type, it is its
1331 (build_type_attribute_qual_variant): When building an attribute
1332 variant, its canonical type is the non-attribute variant. However,
1333 if the attributes are target-dependent and they differ, we need to
1334 use structural equality checks for this type.
1335 (build_qualified_type): A qualified type is not equivalent to its
1336 unqualified variant; set the canonical type appropriately.
1337 (build_distinct_type_copy): When building a distinct type from
1338 another type, the new type is its own canonical type.
1339 (build_variant_type_copy): When building a new type variant, we
1340 assume that it is equivalent to the original type.
1341 (build_pointer_type_for_mode): When building a pointer type, also
1342 build a canonical type pointer.
1343 (build_reference_type_for_mode): When building a reference type,
1344 also build a canonical type reference.
1345 (build_index_type): When we can't hash an index type (e.g.,
1346 because its maximum value is negative), the index type requires
1347 structural equality tests.
1348 (build_array_type): Build the canonical form of an array type.
1349 (build_function_type): Function types require structural equality,
1350 because they contain default arguments, attributes, etc.
1351 (build_method_type_directly): Ditto for method types.
1352 (build_offset_type): Build the canonical offset type.
1353 (build_complex_type): Build the canonical vector type.
1354 (make_vector_type): Build the canonical vector type.
1355 * tree.h (TYPE_CANONICAL): New.
1356 (TYPE_STRUCTURAL_EQUALITY_P): New.
1357 (SET_TYPE_STRUCTURAL_EQUALITY): New.
1358 (struct tree_type): Added "canonical" field.
1359 * params.h (VERIFY_CANONICAL_TYPES): New.
1360 * doc/c-tree.texi (TYPE_CANONICAL): Document.
1361 (TYPE_STRUCTURAL_EQUALITY_P): Document.
1362 (SET_TYPE_STRUCTURAL_EQUALITY): Document.
1363 * doc/invoke.texi (verify-canonical-types): Document --param
1364 parameter for verifying canonical types.
1366 2007-01-02 Joseph Myers <joseph@codesourcery.com>
1368 * config.gcc (powerpc-*-eabispe*, powerpc-*-eabisimaltivec*,
1369 powerpc-*-eabisim*, powerpc-*-eabialtivec*, powerpc-*-eabi*,
1370 powerpc-*-rtems*, powerpc-wrs-vxworks, powerpc-wrs-vxworksae,
1371 powerpcle-*-eabisim*, powerpcle-*-eabi*): Add rs6000/e500.h to
1373 * config/rs6000/e500.h: New.
1374 * config/rs6000/eabi.h (TARGET_SPE_ABI, TARGET_SPE, TARGET_E500,
1375 TARGET_ISEL, TARGET_FPRS, TARGET_E500_SINGLE, TARGET_E500_DOUBLE):
1377 * config/rs6000/linuxspe.h (TARGET_SPE_ABI, TARGET_SPE,
1378 TARGET_E500, TARGET_ISEL, TARGET_FPRS, TARGET_E500_SINGLE,
1379 TARGET_E500_DOUBLE): Remove.
1380 * config/rs6000/vxworks.h (TARGET_SPE_ABI, TARGET_SPE,
1381 TARGET_E500, TARGET_ISEL, TARGET_FPRS): Remove.
1382 * config/rs6000/rs6000.h (CHECK_E500_OPTIONS): Define.
1383 * config/rs6000/rs6000.c (rs6000_override_options): Use
1386 2007-01-02 Joseph Myers <joseph@codesourcery.com>
1388 * config/rs6000/rs6000.c (print_operand): Check (TARGET_SPE ||
1389 TARGET_E500_DOUBLE), not TARGET_E500, for %y.
1390 (rs6000_generate_compare, rs6000_emit_sCOND, output_cbranch,
1391 rs6000_emit_cmove): Don't check TARGET_E500.
1392 * config/rs6000/rs6000.md (bunordered, bordered, sunordered,
1393 sordered): Don't check TARGET_E500.
1395 2007-01-01 Eric Christopher <echristo@apple.com>
1397 * config/mips/mips.c (mips_regno_mode_ok_for_base_p): Use
1398 HARD_REGISTER_NUM_P.
1400 2007-01-01 Roger Sayle <roger@eyesopen.com>
1402 * fold-const.c (fold_binary) <EQ_EXPR>: Fold "(X^C1) eq/ne C2" into
1403 "X eq/ne (C1^C2)". Fold "(X^Z) eq/ne (Y^Z)" as "X eq/ne Y" when Z
1404 has no side-effects. Fold "(X^C1) eq/ne (Y^C2)" as "(X^(C1^C2))
1407 2007-01-01 Mike Stump <mrs@apple.com>
1409 * configure.ac: Remove support for building with Apple's gcc-3.1.
1411 2007-01-02 Joseph Myers <joseph@codesourcery.com>
1414 * caller-save.c (add_stored_regs): Only handle SUBREGs if inner
1415 REG is a hard register. Do not modify REG before calling
1417 * rtlanal.c (subreg_get_info): Don't assert size of XMODE is a
1418 multiple of the size of YMODE for certain lowpart cases.
1420 2007-01-01 Andrew Pinski <pinskia@gmail.com>
1423 * gimplify (voidify_wrapper_expr): Update for
1426 2007-01-01 Andreas Schwab <schwab@suse.de>
1429 * config/ia64/ia64.c (ia64_compute_frame_size): Account space for
1430 save of BR0 in extra_spill_size instead of spill_size.
1431 (ia64_expand_prologue): Save BR0 outside of the gr/br/fr spill
1433 (ia64_expand_epilogue): Restore BR0 from its new location.
1435 2007-01-01 Andrew Pinski <pinskia@gmail.com>
1437 * gimplify.c (gimplify_init_constructor <case VECTOR_TYPE>):
1438 Use a temporary variable if the left hand side is not a gimple
1441 2007-01-01 Andrew Pinski <pinskia@gmail.com>
1443 * gimplify.c (gimplify_return_expr): Make the temporary variable
1444 for the return expression, a gimple register variable.
1446 2007-01-01 Jan Hubicka <jh@suse.cz>
1448 * emit-rtl.c (emit_copy_of_insn_after): Do not call copy_insn_1 for
1451 2007-01-01 Mike Stump <mrs@apple.com>
1453 * configure.ac (HAVE_GAS_LITERAL16): Add autoconf check for
1455 * config/darwin.c (machopic_select_rtx_section): Use
1457 (darwin_mergeable_constant_section): Likewise.
1458 * configure: Regenerate.
1459 * config.in: Regenerate.
1461 2007-01-01 Jan Hubicka <jh@suse.cz>
1462 Andrew Pinski <pinskia@gmail.com>
1464 * cgraphunit.c (cgraph_optimize): Call cgraph_add_new_functions
1465 before starting IPA passes.