OSDN Git Service

* doc/invoke.texi (ARM Options): Update lists of -mcpu and -march
[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog
1 2009-01-13  Joseph Myers  <joseph@codesourcery.com>
2
3         * doc/invoke.texi (ARM Options): Update lists of -mcpu and -march
4         values.  Remove duplicate arm8 entry.
5
6 2009-01-13  Sebastian Pop  <sebastian.pop@amd.com>
7
8         PR tree-optimization/38786
9         * graphite.c (expand_scalar_variables_ssa_name): New, outlined from
10         the SSA_NAME case of expand_scalar_variables_expr.
11         Set the type of an expression to the type of its assign statement.
12         (expand_scalar_variables_expr): Also gather the scalar computation
13         used to index the memory access.  Do not pass loop_p.
14         Fix comment.  Stop recursion on tcc_constant or tcc_declaration.
15         (expand_scalar_variables_stmt): Pass to expand_scalar_variables_expr
16         the gimple_stmt_iterator where it inserts new code.  Do not pass loop_p.
17         (copy_bb_and_scalar_dependences): Do not pass loop_p.
18         (translate_clast): Update call to copy_bb_and_scalar_dependences.
19
20 2009-01-13  Sebastian Pop  <sebastian.pop@amd.com>
21
22         * graphite.h (debug_value): Removed.
23         * graphite.c (debug_value): Removed.
24
25 2009-01-13  Richard Earnshaw  <rearnsha@arm.com>
26
27         * arm.c (output_move_double): Don't synthesize thumb-2 ldrd/strd with
28         two 32-bit instructions.
29
30 2009-01-13  Richard Earnshaw  <rearnsha@arm.com>
31
32         * arm.c (struct processors): Pass for speed down into cost helper
33         functions.
34         (const_ok_for_op): Handle COMPARE and inequality nodes.
35         (arm_rtx_costs_1): Rewrite.
36         (arm_size_rtx_costs): Update prototype.
37         (arm_rtx_costs): Pass speed down to helper functions.
38         (arm_slowmul_rtx_costs): Rework cost calculations.
39         (arm_fastmul_rtx_costs, arm_xscale_rtx_costs): Likewise.
40         (arm_9e_rtx_costs): Likewise.
41
42 2009-01-13  Uros Bizjak  <ubizjak@gmail.com>
43
44         * config/alpha/alpha.c (alpha_legitimate_address_p): Explicit
45         relocations of local symbols  wider than UNITS_PER_WORD are not valid.
46         (alpha_legitimize_address): Do not split local symbols wider than
47         UNITS_PER_WORD into HIGH/LO_SUM parts.
48
49 2009-01-13  Danny Smith  <dannysmith@users.sourceforge.net>
50
51         PR bootstrap/38580
52         * gcc.c (process_command): Replace call to execvp with calls
53         to pex_one and exit.
54
55 2009-01-03  Anatoly Sokolov  <aesok@post.ru>
56
57         PR target/29141
58         * config/avr/t-avr (LIB1ASMFUNCS): Add _tablejump_elpm.
59         * config/avr/libgcc.S (__do_global_ctors, __do_global_dtors): Add
60         variant for devices with 3-byte PC.
61         (__tablejump_elpm__) : New.
62
63 2009-01-12  Jakub Jelinek  <jakub@redhat.com>
64
65         PR c/32041
66         * c-parser.c (c_parser_postfix_expression): Allow `->' in
67         offsetof member-designator, handle it as `[0].'.
68
69 2009-01-12  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
70
71         * pa.c (pa_asm_output_mi_thunk): Use pc-relative branch to thunk
72         function when not using named sections on targets with named sections
73         if branch distance is less than 262132.
74
75 2009-01-12  Richard Earnshaw  <rearnsha@arm.com>
76
77         * combine.c (combine_instructions):  Recompute
78         optimize_this_for_speed_p  for each BB in the main combine loop.
79
80 2009-01-12  Tomas Bily  <tbily@suse.cz>
81
82         PR middlend/38385
83         * tree-loop-distribution.c (prop_phis): New function.
84         (generate_builtin): Call prop_phis.
85         * testsuite/gcc.dg/tree-ssa/pr38385.c: New file.
86
87 2009-01-12  Jakub Jelinek  <jakub@redhat.com>
88
89         PR tree-optimization/38807
90         * tree-ssa-reassoc.c (remove_visited_stmt_chain): Don't look at
91         gimple_visited_p unless stmt is GIMPLE_ASSIGN.
92
93 2009-01-11  Adam Nemet  <anemet@caviumnetworks.com>
94
95         * expmed.c (store_bit_field_1): Properly truncate the paradoxical
96         subreg of op0 to the original op0.
97
98 2009-01-11  Laurent GUERBY <laurent@guerby.net>
99
100         * doc/sourcebuild.texi (Source Tree): Move up intl and fixinc.
101         
102 2009-01-11  Markus Schoepflin  <markus.schoepflin@comsoft.de>
103
104         PR debug/7055
105         * gcc/mips-tfile.c (parse_def): Fix parsing of def strings
106         starting with digits.
107
108 2009-01-10  Jakub Jelinek  <jakub@redhat.com>
109
110         PR target/38695
111         * config/arm/arm.c (arm_is_long_call_p): Don't call
112         arm_function_in_section_p if decl isn't a FUNCTION_DECL.
113
114 2009-01-09  Steven Bosscher  <steven@gcc.gnu.org>
115
116         * regrename.c (regrename_optimize): Fix dumping.
117         (find_oldest_value_reg): Preserve REG_POINTER.
118         (copy_hardreg_forward_1): Likewise.
119
120 2009-01-09  Diego Novillo  <dnovillo@google.com>
121
122         * gimple.h (struct gimple_statement_base)<uid>: Document
123         the restrictions on its use.
124         (gimple_uid): Tidy.
125         (gimple_set_uid): Tidy.
126
127 2009-01-09  Jakub Jelinek  <jakub@redhat.com>
128
129         * config/i386/i386.c (ix86_expand_movmem, ix86_expand_setmem): Add
130         zero guard even if align_bytes != 0 and count is smaller than
131         size_needed.
132
133 2008-01-09  Vladimir Makarov  <vmakarov@redhat.com>
134
135         PR rtl-optimization/38495
136         * ira-emit.c (print_move_list, ira_debug_move_list): New functions.
137         (add_range_and_copies_from_move_list): Print all added ranges.
138         Add ranges to memory optimized destination.
139
140 2009-01-09  Jakub Jelinek  <jakub@redhat.com>
141
142         PR target/38686
143         PR target/38708
144         * config/i386/i386.c (override_options): Reject
145         -mstringop-strategy=rep_8byte with -m32.
146         (ix86_expand_movmem): For size_needed == 1 set epilogue_size_needed
147         to 1.  Do count comparison against epilogue_size_needed at compile
148         time even when count_exp was constant forced into register.  For
149         size_needed don't jump to epilogue, instead just avoid aligning
150         and invoke the body algorithm.  If need_zero_guard, add zero guard
151         even if count is non-zero, but smaller than size_needed + number of
152         bytes that could be stored for alignment.
153         (ix86_expand_setmem): For size_needed == 1 set epilogue_size_needed
154         to 1.  If need_zero_guard, add zero guard even if count is non-zero,
155         but smaller than size_needed + number of bytes that could be stored
156         for alignment.  Compare size_needed with epilogue_size_needed instead
157         of desired_align - align, don't adjust size_needed, pass
158         epilogue_size_needed to the epilogue expanders.
159
160         PR c/35742
161         * c-pretty-print.c (pp_c_expression): Handle GOTO_EXPR like BIND_EXPR.
162
163 2009-01-09  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
164
165         * pa.c (last_address): Change to unsigned.
166         (update_total_code_bytes): Change argument to unsigned.  Don't
167         check if insn addresses are set.
168         (pa_output_function_epilogue): Set last_address to UINT_MAX if insn
169         addresses are not set.
170         (pa_asm_output_mi_thunk): Handle wrap when updating last_address.
171
172 2009-01-09  Nick Clifton  <nickc@redhat.com>
173
174         * config/sh/symbian.c: Replace uses of DECL_INLINE with
175         DECL_DECLARED_INLINE_P.
176
177 2009-01-09  Jakub Jelinek  <jakub@redhat.com>
178
179         PR middle-end/38347
180         * dojump.c (do_jump_by_parts_zero_rtx): Use mode instead of
181         GET_MODE (op0) in operand_subword_force calls.
182
183         PR middle-end/38771
184         * fold-const.c (fold_unary): For COMPOUND_EXPR and COND_EXPR,
185         fold_convert arg0 operands to TREE_TYPE (op0) first.
186
187 2009-01-08  Vladimir Makarov  <vmakarov@redhat.com>
188
189         * params.def (ira-max-conflict-table-size): Decrease default value
190         to 1000.
191
192 2009-01-08  Jakub Jelinek  <jakub@redhat.com>
193
194         PR tree-optimization/37031
195         * lambda-code.c (lambda_collect_parameters): Call pointer_set_destroy
196         on parameter_set.
197         (build_access_matrix): Reserve correct size for AM_MATRIX vector,
198         allocate it using gc instead of heap, use VEC_quick_push instead of
199         VEC_safe_push.
200         * graphite.c (build_access_matrix): Allocate AM_MATRIX vector using gc
201         instead of heap, use VEC_quick_push instead of VEC_safe_push.
202         * tree-data-ref.h (struct access_matrix): Change matrix to gc
203         allocated vector from heap allocated.
204         * lambda.h: Add DEF_VEC_ALLOC_P for gc allocated lambda_vector.
205         * tree-loop-linear.c (linear_transform_loops): Allocate nest
206         vector only after perfect_loop_nest_depth call.
207
208 2009-01-08  Sebastian Pop  <sebastian.pop@amd.com>
209             Jan Sjodin  <jan.sjodin@amd.com>
210
211         PR tree-optimization/38559
212         * graphite.c (debug_value, copy_constraint,
213         swap_constraint_variables, scale_constraint_variable, ): New.
214         (get_lower_bound, get_upper_bound): Removed.
215         (graphite_trans_bb_strip_mine): Clean up this code that works
216         only for constant number of iterations.  Fully copy upper and
217         lower bound constraints, not only the constant part of them.
218         * graphite.h (debug_value): Declared.
219
220 2009-01-08  Ira Rosen  <irar@il.ibm.com>
221
222         PR tree-optimization/37194
223         * tree-vect-transform.c (vect_estimate_min_profitable_iters):
224         Don't add the cost of cost model guard in prologue to scalar 
225         outside cost in case of known number of iterations.
226
227 2009-01-07  Nathan Froyd  <froydnj@codesourcery.com>
228             Alan Modra  <amodra@bigpond.net.au>
229
230         * config/rs6000/rs6000.c (rs6000_legitimize_address): Check for
231         non-word-aligned REG+CONST addressing.
232
233 2009-01-07  Uros Bizjak  <ubizjak@gmail.com>
234
235         PR target/38706
236         * config/alpha/alpha.c (alpha_end_function): For TARGET_ABI_OSF, call
237         free_after_compilation when outputting a thunk.
238         (alpha_output_mi_thunk_osf): Assert that we are processing a thunk.
239         Do not call free_after_compilation here.
240
241 2009-01-07  Uros Bizjak  <ubizjak@gmail.com>
242
243         * config/i386/i386.c (ix86_target_string): Use ARRAY_SIZE.
244         (ix86_valid_target_attribute_inner_p): Ditto.
245
246 2009-01-07  Jan Sjodin  <jan.sjodin@amd.com>
247
248         PR tree-optimization/38492
249         PR tree-optimization/38498
250         * tree-check.c (operator_is_linear, scev_is_linear_expression): New.
251         * tree-chrec.h (scev_is_linear_expression): Declared.
252         * graphite.c (graphite_cannot_represent_loop_niter): New.
253         (scopdet_basic_block_info): Call graphite_cannot_represent_loop_niter.
254         (graphite_loop_normal_form): Use gcc_assert.
255         (scan_tree_for_params): Use CASE_CONVERT.
256         (phi_node_is_iv, bb_contains_non_iv_scalar_phi_nodes): New.
257         (build_scop_conditions_1): Call bb_contains_non_iv_scalar_phi_nodes.
258         Use gcc_assert.  Discard scops that contain unhandled cases.
259         (build_scop_conditions): Return a boolean status for unhandled cases.
260         (strip_mine_profitable_p): Print the loop number, not its depth.
261         (is_interchange_valid): Pass the depth of the loop nest, don't
262         recompute it wrongly.
263         (graphite_trans_bb_block): Same.
264         (graphite_trans_bb_block): Print tentative of loop blocking.
265         (graphite_trans_scop_block): Do not print that the loop has been
266         blocked.
267         (graphite_transform_loops): Do not handle scops that contain condition
268         scalar phi nodes.
269
270 2009-01-07  H.J. Lu  <hongjiu.lu@intel.com>
271
272         AVX Programming Reference (December, 2008)
273         * config/i386/avxintrin.h (_mm256_stream_si256): New.
274         (_mm256_stream_pd): Likewise.
275         (_mm256_stream_ps): Likewise.
276
277         * config/i386/i386.c (ix86_builtins): Add IX86_BUILTIN_MOVNTDQ256,
278         IX86_BUILTIN_MOVNTPD256 and IX86_BUILTIN_MOVNTPS256.
279         (ix86_special_builtin_type): Add VOID_FTYPE_PV4DI_V4DI.
280         (bdesc_special_args): Add __builtin_ia32_movntdq256,
281         __builtin_ia32_movntpd256 and __builtin_ia32_movntps256.
282         (ix86_init_mmx_sse_builtins): Handle VOID_FTYPE_PV4DI_V4DI.
283         (ix86_expand_special_args_builtin): Likewise.
284
285         * config/i386/sse.md (AVXMODEDI): New.
286         (avx_movnt<mode>): Likewise.
287         (avx_movnt<mode>): Likewise.
288         (<sse>_movnt<mode>): Remove AVX support.
289         (sse2_movntv2di): Likewise.
290
291 2009-01-07  Richard Guenther  <rguenther@suse.de>
292
293         PR middle-end/38751
294         * fold-const.c (extract_muldiv): Remove obsolete comment.
295         (fold_plusminus_mult_expr): Undo MINUS_EXPR
296         to PLUS_EXPR canonicalization for the canonicalization.
297
298 2009-01-07  Gerald Pfeifer  <gerald@pfeifer.com>
299
300         * doc/install.texi (alpha*-dec-osf*): Remove note on 32-bit
301         hosted cross-compilers generating less efficient code.
302
303 2009-01-06  Richard Sandiford  <rdsandiford@googlemail.com>
304
305         * function.h (rtl_data): Add a dbr_scheduled_p field.
306         * reorg.c (dbr_schedule): Set it.
307         (gate_handle_delay_slots): Check it.
308         * config/mips/mips.c (mips_base_delayed_branch): Delete.
309         (mips_reorg): Check flag_delayed_branch instead of
310         mips_base_delayed_branch.
311         (mips_override_options): Don't set mips_base_delayed_branch
312         or flag_delayed_branch.
313
314 2009-01-06  Richard Sandiford  <rdsandiford@googlemail.com>
315
316         PR rtl-optimization/38426.
317         * ira.c (ira): Set current_function_is_leaf earlier.
318
319 2009-01-06  Jakub Jelinek  <jakub@redhat.com>
320
321         PR rtl-optimization/38722
322         * combine.c (try_combine): Don't modify PATTERN (i3) and notes
323         too early, only set a flag and modify after last possible
324         undo_all point.
325
326 2009-01-06  Janis Johnson  <janis187@us.ibm.com>
327
328         PR c/34252
329         * ginclude/float.h: Rename DECnn_DEN to DECnn_SUBNORMAL_MIN.
330         * real.c (decimal_single_format): Correct values of emin and emax.
331         (decimal_double_format): Ditto.
332         (decimal_quad_format): Ditto.
333         * c-cppbuiltin.c (builtin_define_decimal_float_constants): Adjust
334         computation of DECnn_MIN and DECnn_MAX for corrected values of
335         emin and emax.  Define __DECnn_SUBNORMAL_MIN__ instead of
336         __DECnn_MIN__, and adjust its computation for the corrected value
337         of emin.
338
339 2009-01-06  Jan Hubicka  <jh@suse.cz>
340
341         PR target/38744
342         * i386.c (ix86_expand_call): Use ARRAY_SIZE.
343
344 2009-01-06  Gerald Pfeifer  <gerald@pfeifer.com>
345
346         * doc/contrib.texi (Contributors): Slightly adjust the end note.
347         Add Robert Clark to the list of testers.
348
349 2009-01-06  Jan Hubicka  <jh@suse.cz>
350             Kai Tietz <kai.tietz@onevision.com>
351
352         * i386.md (*msabi_syvabi): Add SSE regs clobbers.
353         * i386.c (ix86_expand_call): Add clobbers.
354
355 2009-01-06  Jan Hubicka  <jh@suse.cz>
356             Kai Tietz <kai.tietz@onevision.com>
357
358         * i386.h (CONDITIONAL_CALL_USAGE): SSE regs are not used for w64 ABI.
359         * i386.c (struct ix86_frame): Add padding0 and nsseregs.
360         (ix86_nsaved_regs): Count only general purpose regs.
361         (ix86_nsaved_sseregs): New.
362         (ix86_compute_frame_layout): Update nsseregs; set preferred alignment
363         to 16 for w64; compute padding and size of sse reg save area.
364         (ix86_emit_save_regs, ix86_emit_save_regs_using_mov): Save only
365         general purpose regs.
366         (ix86_emit_save_sse_regs_using_mov): New.
367         (ix86_expand_prologue): Save SSE regs if needed.
368         (ix86_emit_restore_regs_using_mov): Use only general purpose regs.
369         (ix86_emit_restore_sse_regs_using_mov): New.
370         (ix86_expand_epilogue): Save SSE regs if needed.
371
372 2009-01-06  Jan Hubicka  <jh@suse.cz>
373             Kai Tietz <kai.tietz@onevision.com>
374
375         * i386.h (ACCUMULATE_OUTGOING_ARGS): Enable for MSABI
376         * i386.c (init_cumulative_args): Disallow calls of MSABI functions
377         when accumulate outgoing args is off.
378
379 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
380
381         PR bootstrap/38742
382         * ira-color.c (ira_reuse_stack_slot): Check ENABLE_IRA_CHECKING
383         before using pseudos_have_intersected_live_ranges_p.
384
385         * ira-int.h (ira_assert): Always define.
386
387 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
388
389         AVX Programming Reference (December, 2008)
390         * config/i386/avxintrin.h (_mm_permute2_pd): Removed.
391         (_mm256_permute2_pd): Likewise.
392         (_mm_permute2_ps): Likewise.
393         (_mm256_permute2_ps): Likewise.
394         * config/i386/i386.md (UNSPEC_VPERMIL2): Likewise.
395         * config/i386/sse.md (avx_vpermil2<mode>3): Likewise.
396
397         * config/i386/i386.c (ix86_builtins): Remove
398         IX86_BUILTIN_VPERMIL2PD, IX86_BUILTIN_VPERMIL2PS,
399         IX86_BUILTIN_VPERMIL2PD256 and IX86_BUILTIN_VPERMIL2PS256.
400         (ix86_builtin_type): Remove V8SF_FTYPE_V8SF_V8SF_V8SI_INT,
401         V4DF_FTYPE_V4DF_V4DF_V4DI_INT, V4SF_FTYPE_V4SF_V4SF_V4SI_INT
402         and V2DF_FTYPE_V2DF_V2DF_V2DI_INT.
403         (bdesc_args): Remove __builtin_ia32_vpermil2pd,
404         __builtin_ia32_vpermil2ps, __builtin_ia32_vpermil2pd256 and
405         __builtin_ia32_vpermil2ps256.
406         (ix86_init_mmx_sse_builtins): Updated.
407         (ix86_expand_args_builtin): Likewise.
408
409 2009-01-05  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
410
411         * pa.c (output_call): Relocate non-jump insns in the delay slot of
412         long absolute calls when generating PA 2.0 code.
413
414 2009-01-05  Vladimir Makarov  <vmakarov@redhat.com>
415
416         PR rtl-optimization/38583
417         * params.h (IRA_MAX_CONFLICT_TABLE_SIZE): New macro.
418
419         * params.def (ira-max-conflict-table-size): New.
420
421         * doc/invoke.texi (ira-max-conflict-table-size): Decribe.
422         
423         * ira.h (ira_conflicts_p): New external definition.
424         
425         * ira-conflicts.c (build_conflict_bit_table): Do not build too big
426         table.  Report this.  Return result of building.
427         (ira_build_conflicts): Use ira_conflicts_p.  Check result of
428         building conflict table.
429
430         * ira-color.c (fast_allocation): Use num instead of ira_allocnos_num.
431         (ira_color): Use ira_conflicts_p.
432         
433         * global.c: Include ira.h.
434         (pseudo_for_reload_consideration_p, build_insn_chain): Use
435         ira_conflicts_p.
436
437         * Makefile.in (global.o): Add ira.h.
438         
439         * ira-build.c (mark_all_loops_for_removal,
440         propagate_some_info_from_allocno): New.
441         (remove_unnecessary_allocnos): Call
442         propagate_some_info_from_allocno.
443         (remove_low_level_allocnos): New.
444         (remove_unnecessary_regions): Add parameter.  Call
445         mark_all_loops_for_removal and remove_low_level_allocnos.  Pass
446         parameter to remove_unnecessary_regions.
447         (ira_build): Remove all regions but root if the conflict table was
448         not built.  Update conflict hard regs for allocnos crossing calls.
449
450         * ira.c (ira_conflicts_p): New global.
451         (ira): Define and use ira_conflicts_p.
452
453         * reload1.c (compute_use_by_pseudos, reload, count_pseudo,
454         count_spilled_pseudo, find_reg, alter_reg, finish_spills,
455         emit_input_reload_insns, delete_output_reload): Use ira_conflicts_p.
456         
457 2009-01-06  Ben Elliston  <bje@au.ibm.com>
458
459         * gengtype-lex.l (YY_NO_INPUT): Define.
460
461 2009-01-05  Andrew Pinski  <andrew_pinski@playstation.sony.com>
462
463         PR c/34911
464         * c-common.c (handle_vector_size_attribute): Also reject
465         BOOLEAN_TYPE types.
466
467 2009-01-05  Sebastian Pop  <sebastian.pop@amd.com>
468
469         PR tree-optimization/38492
470         * graphite.c (rename_map_elt, debug_rename_elt,
471         debug_rename_map_1, debug_rename_map, new_rename_map_elt,
472         rename_map_elt_info, eq_rename_map_elts,
473         get_new_name_from_old_name, bb_in_sese_p): Moved around.
474         (sese_find_uses_to_rename_use): Renamed sese_build_livein_liveouts_use.
475         (sese_find_uses_to_rename_bb): Renamed sese_build_livein_liveouts_bb.
476         (sese_build_livein_liveouts): New.
477         (new_sese, free_sese): New.
478         (new_scop): Call new_sese.
479         (free_scop): Call free_sese.
480         (rename_variables_from_edge, rename_phis_end_scop): Removed.
481         (register_old_new_names): Renamed register_old_and_new_names.
482         (register_scop_liveout_renames, add_loop_exit_phis,
483         insert_loop_close_phis, struct igp,
484         default_liveout_before_guard, add_guard_exit_phis,
485         insert_guard_phis, copy_renames): New.
486         (translate_clast): Call insert_loop_close_phis and insert_guard_phis.
487         (sese_add_exit_phis_edge): Renamed scop_add_exit_phis_edge.
488         (rewrite_into_sese_closed_ssa): Renamed scop_insert_phis_for_liveouts.
489         (scop_adjust_phis_for_liveouts): New.
490         (gloog): Call scop_adjust_phis_for_liveouts.
491
492         * graphite.h (struct sese): Documented.  Added fields liveout,
493         num_ver and livein.
494         (SESE_LIVEOUT, SESE_LIVEIN, SESE_LIVEIN_VER, SESE_NUM_VER): New.
495         (new_sese, free_sese, sese_build_livein_liveouts): Declared.
496         (struct scop): Added field liveout_renames.
497         (SCOP_LIVEOUT_RENAMES): New.
498
499 2009-01-05  Harsha Jagasia  <harsha.jagasia@amd.com>
500
501         PR tree-optimization/38510
502         * graphite.c (recompute_all_dominators): Call mark_irreducible_loops.
503         (translate_clast): Call recompute_all_dominators before
504         graphite_verify.
505         (gloog): Call recompute_all_dominators before graphite_verify.
506
507 2009-01-05  Harsha Jagasia  <harsha.jagasia@amd.com>
508             Jan Sjodin <jan.sjodin@amd.com>
509
510         PR tree-optimization/38500
511         * graphite.c (create_sese_edges): Call fix_loop_structure after
512         splitting blocks.
513
514 2009-01-05  Joel Sherrill <joel.sherrill@oarcorp.com>
515
516         * config.gcc: Add m32r*-*-rtems*.
517         * config/m32r/rtems.h: New file.
518
519 2009-01-05  Ben Elliston  <bje@au.ibm.com>
520
521         * Makefile.in (.po.gmo): Use mkinstalldirs, not test -d || mkdir.
522         (.po.pox): Likewise.
523         (po/gcc.pot): Likewise.
524
525 2009-01-04  David S. Miller  <davem@davemloft.net>
526
527         * config/sparc/sparc.h (SECONDARY_MEMORY_NEEDED_RTX): Delete.
528         (STARTING_FRAME_OFFSET): Always set to zero.
529
530 2009-01-04  Richard Sandiford  <rdsandiford@googlemail.com>
531
532         * tree.def (LSHIFT_EXPR, RSHIFT_EXPR): Add commentary.
533         * tree-cfg.c (verify_gimple_assign_binary): Allow shifts of
534         fixed-point types, and vectors of the same.
535
536 2009-01-04  Richard Sandiford  <rdsandiford@googlemail.com>
537
538         * config/mips/sync.md (*mb_barrier): Rename to...
539         (*memory_barrier): ...this.
540
541 2009-01-04  Jonathan Wakely  <jwakely.gcc@gmail.com>
542
543         * doc/extend.texi (Function Attributes): Move @cindex after @item
544         for 'artificial' and 'flatten'. Fix grammar for 'externally_visible'
545         and put in alphabetical order. Fix 'target' name and put in order.
546         * doc/invoke.texi (-Wstrict-null-sentinel, -fipa-matrix-reorg): Fix
547         typos.
548
549 2009-01-04  Uros Bizjak  <ubizjak@gmail.com>
550
551         * config/s390/s390.md (UNSPEC_MB): Rename from UNSPECV_MB.
552         (memory_barrier): Expand as unspec instead of unspec_volatile.
553         Remove mem:BLK from insn operands.  Use Pmode scratch register.
554         (*memory_barrier): Define as unspec instead of unspec_volatile.
555         Use (match_dup 0) as input operand.
556
557         * config/sparc/sparc.md (UNSPEC_MEMBAR): Rename from UNSPECV_MEMBAR.
558         * config/sparc/sync.md (memory_barrier): Expand as unspec instead of
559         unspec_volatile.  Remove mem:BLK from insn operands.  Use Pmode
560         scratch register.  Remove operand 1.
561         (*stbar): Define as unspec instead of unspec_volatile.
562         Use (match_dup 0) as input operand, remove (const_int 8).
563         (*membar): Define as unspec instead of unspec_volatile.
564         Use (match_dup 0) as input operand, remove input operand 2.
565
566         * config/xtensa/xtensa.md (UNSPEC_MEMW): Rename from UNSPECV_MEMW.
567         (memory_barrier): Expand as unspec instead of unspec_volatile.
568         Remove mem:BLK from insn operands.  Use Pmode scratch register.
569         (*memory_barrier): Define as unspec instead of unspec_volatile.
570         Use (match_dup 0) as input operand.
571
572         * config/ia64/sync.md (memory_barrier): Redefine as expander pattern.
573         Remove mem:BLK from insn operands.  Use Pmode scratch register.
574         Set volatile flag on operand 0.
575         (*memory_barrier): New insn pattern.
576
577         * config/rs6000/sync.md (memory_barrier): Remove mem:BLK from
578         insn operands.
579         (*memory_barrier): Use (match_dup 0) as input operand.
580
581         * config/mips/sync.md (memory_barrier): Redefine as expander pattern.
582         Remove mem:BLK from insn operands.  Use Pmode scratch register.
583         Set volatile flag on operand 0.
584         (*mb_internal): New insn pattern.
585
586         * config/alpha/sync.md (*memory_barrier): Rename from *mb_internal.
587
588 2009-01-04  Steven Bosscher  <steven@gcc.gnu.org>
589
590         PR middle-end/38586
591         * function.c (struct temp_slot): Move to the section of the file
592         that deals with temp slots.  Remove field 'address'.
593         (temp_slot_address_table): New hash table of address -> temp slot.
594         (struct temp_slot_address_entry): New struct, items for the table.
595         (temp_slot_address_compute_hash, temp_slot_address_hash,
596         temp_slot_address_eq, insert_temp_slot_address): Support functions
597         for the new table.
598         (find_temp_slot_from_address): Rewrite to use the new hash table.
599         (remove_unused_temp_slot_addresses): Remove addresses of temp
600         slots that have been made available.
601         (remove_unused_temp_slot_addresses_1): Call-back for htab_traverse,
602         worker function for remove_unused_temp_slot_addresses.
603         (assign_stack_temp_for_type): Don't clear the temp slot address list.
604         Add the temp slot address to the address -> temp slot map.
605         (update_temp_slot_address): Update via insert_temp_slot_address.
606         (free_temp_slots): Call remove_unused_temp_slot_addresses.
607         (pop_temp_slots): Likewise.
608         (init_temp_slots): Allocate the address -> temp slot map, or empty
609         the map if it is already allocated.
610         (prepare_function_start): Initialize temp slot processing.
611
612 2009-01-04  Steven Bosscher  <steven@gcc.gnu.org>
613
614         PR middle-end/38584
615         * cfgexpand.c (estimate_stack_frame_size): Simplify the estimate:
616         Calculate the size of all stack vars assuming no packing of stack
617         vars will happen, replacing a quadratic algorithm with a linear one.
618
619 2009-01-03  Jakub Jelinek  <jakub@redhat.com>
620
621         PR target/38707
622         * expmed.c (store_bit_field_1): Don't modify op0 if movstrict insn
623         can't be used.
624
625 2009-01-03  Diego Novillo  <dnovillo@google.com>
626
627         * doc/contrib.texi: Update contributions.
628
629 2009-01-03  Jakub Jelinek  <jakub@redhat.com>
630
631         PR c++/38705
632         * builtins.c (fold_builtin_memory_op): Give up if either operand
633         is volatile.  Set srctype or desttype to non-qualified version
634         of the other type.
635
636         PR c/38700
637         * builtins.c (fold_builtin_expect): Only check DECL_WEAK for VAR_DECLs
638         and FUNCTION_DECLs.
639
640 2009-01-02  Kenneth Zadeck <zadeck@naturalbridge.com>
641
642         PR rtl-optimization/35805
643         * df-problems.c (df_lr_finalize): Add recursive call to resolve lr
644         problem if fast dce is able to remove any instructions.
645         * dce.c (dce_process_block): Fix dump message.
646         
647 2009-01-02  Mark Mitchell  <mark@codesourcery.com>
648
649         PR 33649
650         * tree-ssa-pre.c (compute_antic): Correct loop bounds.
651
652 2009-01-02  Jakub Jelinek  <jakub@redhat.com>
653
654         PR middle-end/38690
655         * tree-flow.h (op_code_prio, op_prio): New prototypes.
656         * tree-pretty-print.c (op_code_prio): New function.
657         (op_prio): No longer static.  Use op_code_prio.
658         * gimple-pretty-print.c (dump_unary_rhs, dump_binary_rhs):
659         Use op_prio and op_code_prio to determine if () should be
660         printed around operand(s) or not.
661
662         * gimple-pretty-print.c (dump_unary_rhs, dump_binary_rhs,
663         dump_gimple_call, dump_gimple_switch, dump_gimple_cond,
664         dump_gimple_label, dump_gimple_try, dump_symbols, dump_gimple_phi,
665         dump_gimple_mem_ops, dump_bb_header, dump_bb_end, pp_cfg_jump): Use
666         pp_character instead of pp_string for single letter printing.
667
668 2009-01-02  Richard Sandiford  <rdsandiford@googlemail.com>
669
670         * doc/extend.texi: Fix '#pragma GCC option' typo.
671
672 2009-01-02 Richard Guenther <rguenther@suse.de>
673
674         * doc/install.texi (--enable-checking): Mention different
675         default for stage1.
676         (--enable-stage1-checking): Document.
677
678 2009-01-01  Andrew Pinski  <pinskia@gmail.com>
679
680         PR middle-end/30142
681         * tree-cfg.c (verify_expr): Add INDIRECT_REF case.  Change MODIFY_EXPR
682         case to be an error.
683
684 2009-01-02  Ben Elliston  <bje@au.ibm.com>
685
686         * config/fp-bit.h (pack_d): Constify argument.
687         * config/fp-bit.c (makenan): Constify return type. Remove casts.
688         (isnan): Constify argument.
689         (isinf): Likewise.
690         (iszero): Likewise.
691         (pack_d): Likewise.
692         (_fpadd_parts): Constify return type.
693         (_fpmul_parts): Likewise.
694         (_fpdiv_parts): Likewise.
695
696 2009-01-01  Jakub Jelinek  <jakub@redhat.com>
697
698         PR c/36489
699         * c-typeck.c (add_pending_init): Add IMPLICIT argument.  Only
700         warn about overwriting initializer with side-effects or
701         -Woverride-init if !IMPLICIT.
702         (output_init_element): Likewise.  Pass IMPLICIT down to
703         add_pending_init.
704         (process_init_element): Add IMPLICIT argument.  Pass it down
705         to output_init_element.
706         (push_init_element, pop_init_level, set_designator): Adjust
707         process_init_element callers.
708         (set_nonincremental_init, set_nonincremental_init_from_string):
709         Adjust add_pending_init callers.
710         (output_pending_init_elements): Adjust output_init_element callers.
711         * c-tree.h (process_init_element): Adjust prototype.
712         * c-parser.c (c_parser_initelt, c_parser_initval): Adjust
713         process_init_element callers.