OSDN Git Service

* backgraph.c, gc_priv.h (GC_traverse_back_graph,
[pf3gnuchains/gcc-fork.git] / boehm-gc / include / private / gc_locks.h
1 /* 
2  * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
3  * Copyright (c) 1991-1994 by Xerox Corporation.  All rights reserved.
4  * Copyright (c) 1996-1999 by Silicon Graphics.  All rights reserved.
5  * Copyright (c) 1999 by Hewlett-Packard Company. All rights reserved.
6  *
7  *
8  * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
9  * OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
10  *
11  * Permission is hereby granted to use or copy this program
12  * for any purpose,  provided the above notices are retained on all copies.
13  * Permission to modify the code and to distribute modified code is granted,
14  * provided the above notices are retained, and a notice that the code was
15  * modified is included with the above copyright notice.
16  */
17
18 #ifndef GC_LOCKS_H
19 #define GC_LOCKS_H
20
21 /*
22  * Mutual exclusion between allocator/collector routines.
23  * Needed if there is more than one allocator thread.
24  * FASTLOCK() is assumed to try to acquire the lock in a cheap and
25  * dirty way that is acceptable for a few instructions, e.g. by
26  * inhibiting preemption.  This is assumed to have succeeded only
27  * if a subsequent call to FASTLOCK_SUCCEEDED() returns TRUE.
28  * FASTUNLOCK() is called whether or not FASTLOCK_SUCCEEDED().
29  * If signals cannot be tolerated with the FASTLOCK held, then
30  * FASTLOCK should disable signals.  The code executed under
31  * FASTLOCK is otherwise immune to interruption, provided it is
32  * not restarted.
33  * DCL_LOCK_STATE declares any local variables needed by LOCK and UNLOCK
34  * and/or DISABLE_SIGNALS and ENABLE_SIGNALS and/or FASTLOCK.
35  * (There is currently no equivalent for FASTLOCK.)
36  *
37  * In the PARALLEL_MARK case, we also need to define a number of
38  * other inline finctions here:
39  *   GC_bool GC_compare_and_exchange( volatile GC_word *addr,
40  *                                    GC_word old, GC_word new )
41  *   GC_word GC_atomic_add( volatile GC_word *addr, GC_word how_much )
42  *   void GC_memory_barrier( )
43  *   
44  */  
45 # ifdef THREADS
46    void GC_noop1 GC_PROTO((word));
47 #  ifdef PCR_OBSOLETE   /* Faster, but broken with multiple lwp's       */
48 #    include  "th/PCR_Th.h"
49 #    include  "th/PCR_ThCrSec.h"
50      extern struct PCR_Th_MLRep GC_allocate_ml;
51 #    define DCL_LOCK_STATE  PCR_sigset_t GC_old_sig_mask
52 #    define LOCK() PCR_Th_ML_Acquire(&GC_allocate_ml) 
53 #    define UNLOCK() PCR_Th_ML_Release(&GC_allocate_ml)
54 #    define UNLOCK() PCR_Th_ML_Release(&GC_allocate_ml)
55 #    define FASTLOCK() PCR_ThCrSec_EnterSys()
56      /* Here we cheat (a lot): */
57 #        define FASTLOCK_SUCCEEDED() (*(int *)(&GC_allocate_ml) == 0)
58                 /* TRUE if nobody currently holds the lock */
59 #    define FASTUNLOCK() PCR_ThCrSec_ExitSys()
60 #  endif
61 #  ifdef PCR
62 #    include <base/PCR_Base.h>
63 #    include <th/PCR_Th.h>
64      extern PCR_Th_ML GC_allocate_ml;
65 #    define DCL_LOCK_STATE \
66          PCR_ERes GC_fastLockRes; PCR_sigset_t GC_old_sig_mask
67 #    define LOCK() PCR_Th_ML_Acquire(&GC_allocate_ml)
68 #    define UNLOCK() PCR_Th_ML_Release(&GC_allocate_ml)
69 #    define FASTLOCK() (GC_fastLockRes = PCR_Th_ML_Try(&GC_allocate_ml))
70 #    define FASTLOCK_SUCCEEDED() (GC_fastLockRes == PCR_ERes_okay)
71 #    define FASTUNLOCK()  {\
72         if( FASTLOCK_SUCCEEDED() ) PCR_Th_ML_Release(&GC_allocate_ml); }
73 #  endif
74 #  ifdef SRC_M3
75      extern GC_word RT0u__inCritical;
76 #    define LOCK() RT0u__inCritical++
77 #    define UNLOCK() RT0u__inCritical--
78 #  endif
79 #  ifdef GC_SOLARIS_THREADS
80 #    include <thread.h>
81 #    include <signal.h>
82      extern mutex_t GC_allocate_ml;
83 #    define LOCK() mutex_lock(&GC_allocate_ml);
84 #    define UNLOCK() mutex_unlock(&GC_allocate_ml);
85 #  endif
86
87 /* Try to define GC_TEST_AND_SET and a matching GC_CLEAR for spin lock  */
88 /* acquisition and release.  We need this for correct operation of the  */
89 /* incremental GC.                                                      */
90 #  ifdef __GNUC__
91 #    if defined(I386)
92        inline static int GC_test_and_set(volatile unsigned int *addr) {
93           int oldval;
94           /* Note: the "xchg" instruction does not need a "lock" prefix */
95           __asm__ __volatile__("xchgl %0, %1"
96                 : "=r"(oldval), "=m"(*(addr))
97                 : "0"(1), "m"(*(addr)) : "memory");
98           return oldval;
99        }
100 #      define GC_TEST_AND_SET_DEFINED
101 #    endif
102 #    if defined(IA64)
103 #     include <ia64intrin.h>
104        inline static int GC_test_and_set(volatile unsigned int *addr) {
105           return __sync_lock_test_and_set(addr, 1);
106        }
107 #      define GC_TEST_AND_SET_DEFINED
108        inline static void GC_clear(volatile unsigned int *addr) {
109           *addr = 0;
110        }
111 #      define GC_CLEAR_DEFINED
112 #    endif
113 #    ifdef SPARC
114        inline static int GC_test_and_set(volatile unsigned int *addr) {
115          int oldval;
116
117          __asm__ __volatile__("ldstub %1,%0"
118          : "=r"(oldval), "=m"(*addr)
119          : "m"(*addr) : "memory");
120          return oldval;
121        }
122 #      define GC_TEST_AND_SET_DEFINED
123 #    endif
124 #    ifdef M68K
125        /* Contributed by Tony Mantler.  I'm not sure how well it was    */
126        /* tested.                                                       */
127        inline static int GC_test_and_set(volatile unsigned int *addr) {
128           char oldval; /* this must be no longer than 8 bits */
129
130           /* The return value is semi-phony. */
131           /* 'tas' sets bit 7 while the return */
132           /* value pretends bit 0 was set */
133           __asm__ __volatile__(
134                  "tas %1@; sne %0; negb %0"
135                  : "=d" (oldval)
136                  : "a" (addr) : "memory");
137           return oldval;
138        }
139 #      define GC_TEST_AND_SET_DEFINED
140 #    endif
141 #    if defined(POWERPC)
142         inline static int GC_test_and_set(volatile unsigned int *addr) {
143           int oldval;
144           int temp = 1; /* locked value */
145
146           __asm__ __volatile__(
147                "1:\tlwarx %0,0,%3\n"   /* load and reserve               */
148                "\tcmpwi %0, 0\n"       /* if load is                     */
149                "\tbne 2f\n"            /*   non-zero, return already set */
150                "\tstwcx. %2,0,%1\n"    /* else store conditional         */
151                "\tbne- 1b\n"           /* retry if lost reservation      */
152                "\tsync\n"              /* import barrier                 */
153                "2:\t\n"                /* oldval is zero if we set       */
154               : "=&r"(oldval), "=p"(addr)
155               : "r"(temp), "1"(addr)
156               : "cr0","memory");
157           return oldval;
158         }
159 #       define GC_TEST_AND_SET_DEFINED
160         inline static void GC_clear(volatile unsigned int *addr) {
161           __asm__ __volatile__("eieio" : : : "memory");
162           *(addr) = 0;
163         }
164 #       define GC_CLEAR_DEFINED
165 #    endif
166 #    if defined(ALPHA) 
167         inline static int GC_test_and_set(volatile unsigned int * addr)
168         {
169           unsigned long oldvalue;
170           unsigned long temp;
171
172           __asm__ __volatile__(
173                              "1:     ldl_l %0,%1\n"
174                              "       and %0,%3,%2\n"
175                              "       bne %2,2f\n"
176                              "       xor %0,%3,%0\n"
177                              "       stl_c %0,%1\n"
178 #       ifdef __ELF__
179                              "       beq %0,3f\n"
180 #       else
181                              "       beq %0,1b\n"
182 #       endif
183                              "       mb\n"
184                              "2:\n"
185 #       ifdef __ELF__
186                              ".section .text2,\"ax\"\n"
187                              "3:     br 1b\n"
188                              ".previous"
189 #       endif
190                              :"=&r" (temp), "=m" (*addr), "=&r" (oldvalue)
191                              :"Ir" (1), "m" (*addr)
192                              :"memory");
193
194           return oldvalue;
195         }
196 #       define GC_TEST_AND_SET_DEFINED
197         inline static void GC_clear(volatile unsigned int *addr) {
198           __asm__ __volatile__("mb" : : : "memory");
199           *(addr) = 0;
200         }
201 #       define GC_CLEAR_DEFINED
202 #    endif /* ALPHA */
203 #    ifdef ARM32
204         inline static int GC_test_and_set(volatile unsigned int *addr) {
205           int oldval;
206           /* SWP on ARM is very similar to XCHG on x86.  Doesn't lock the
207            * bus because there are no SMP ARM machines.  If/when there are,
208            * this code will likely need to be updated. */
209           /* See linuxthreads/sysdeps/arm/pt-machine.h in glibc-2.1 */
210           __asm__ __volatile__("swp %0, %1, [%2]"
211                              : "=r"(oldval)
212                              : "r"(1), "r"(addr)
213                              : "memory");
214           return oldval;
215         }
216 #       define GC_TEST_AND_SET_DEFINED
217 #    endif /* ARM32 */
218 #    ifdef S390
219        inline static int GC_test_and_set(volatile unsigned int *addr) {
220          int ret;
221          __asm__ __volatile__ (
222           "     l     %0,0(%2)\n"
223           "0:   cs    %0,%1,0(%2)\n"
224           "     jl    0b"
225           : "=&d" (ret)
226           : "d" (1), "a" (addr)
227           : "cc", "memory");
228          return ret;
229        }
230 #    endif
231 #  endif /* __GNUC__ */
232 #  if (defined(ALPHA) && !defined(__GNUC__))
233 #    ifndef OSF1
234         --> We currently assume that if gcc is not used, we are
235         --> running under Tru64.
236 #    endif
237 #    include <machine/builtins.h>
238 #    include <c_asm.h>
239 #    define GC_test_and_set(addr) __ATOMIC_EXCH_LONG(addr, 1)
240 #    define GC_TEST_AND_SET_DEFINED
241 #    define GC_clear(addr) { asm("mb"); *(volatile unsigned *)addr = 0; }
242 #    define GC_CLEAR_DEFINED
243 #  endif
244 #  if defined(MSWIN32)
245 #    define GC_test_and_set(addr) InterlockedExchange((LPLONG)addr,1)
246 #    define GC_TEST_AND_SET_DEFINED
247 #  endif
248 #  ifdef MIPS
249 #    ifdef LINUX
250 #      include <sys/tas.h>
251 #      define GC_test_and_set(addr) _test_and_set((int *) addr,1)
252 #      define GC_TEST_AND_SET_DEFINED
253 #    elif __mips < 3 || !(defined (_ABIN32) || defined(_ABI64)) \
254         || !defined(_COMPILER_VERSION) || _COMPILER_VERSION < 700
255 #        ifdef __GNUC__
256 #          define GC_test_and_set(addr) _test_and_set((void *)addr,1)
257 #        else
258 #          define GC_test_and_set(addr) test_and_set((void *)addr,1)
259 #        endif
260 #    else
261 #        define GC_test_and_set(addr) __test_and_set32((void *)addr,1)
262 #        define GC_clear(addr) __lock_release(addr);
263 #        define GC_CLEAR_DEFINED
264 #    endif
265 #    define GC_TEST_AND_SET_DEFINED
266 #  endif /* MIPS */
267 #  if defined(_AIX)
268 #    include <sys/atomic_op.h>
269 #    if (defined(_POWER) || defined(_POWERPC)) 
270 #      if defined(__GNUC__)  
271          inline static void GC_memsync() {
272            __asm__ __volatile__ ("sync" : : : "memory");
273          }
274 #      else
275 #        ifndef inline
276 #          define inline __inline
277 #        endif
278 #        pragma mc_func GC_memsync { \
279            "7c0004ac" /* sync (same opcode used for dcs)*/ \
280          }
281 #      endif
282 #    else 
283 #    error dont know how to memsync
284 #    endif
285      inline static int GC_test_and_set(volatile unsigned int * addr) {
286           int oldvalue = 0;
287           if (compare_and_swap((void *)addr, &oldvalue, 1)) {
288             GC_memsync();
289             return 0;
290           } else return 1;
291      }
292 #    define GC_TEST_AND_SET_DEFINED
293      inline static void GC_clear(volatile unsigned int *addr) {
294           GC_memsync();
295           *(addr) = 0;
296      }
297 #    define GC_CLEAR_DEFINED
298
299 #  endif
300 #  if 0 /* defined(HP_PA) */
301      /* The official recommendation seems to be to not use ldcw from    */
302      /* user mode.  Since multithreaded incremental collection doesn't  */
303      /* work anyway on HP_PA, this shouldn't be a major loss.           */
304
305      /* "set" means 0 and "clear" means 1 here.         */
306 #    define GC_test_and_set(addr) !GC_test_and_clear(addr);
307 #    define GC_TEST_AND_SET_DEFINED
308 #    define GC_clear(addr) GC_noop1((word)(addr)); *(volatile unsigned int *)addr = 1;
309         /* The above needs a memory barrier! */
310 #    define GC_CLEAR_DEFINED
311 #  endif
312 #  if defined(GC_TEST_AND_SET_DEFINED) && !defined(GC_CLEAR_DEFINED)
313 #    ifdef __GNUC__
314        inline static void GC_clear(volatile unsigned int *addr) {
315          /* Try to discourage gcc from moving anything past this. */
316          __asm__ __volatile__(" " : : : "memory");
317          *(addr) = 0;
318        }
319 #    else
320             /* The function call in the following should prevent the    */
321             /* compiler from moving assignments to below the UNLOCK.    */
322 #      define GC_clear(addr) GC_noop1((word)(addr)); \
323                              *((volatile unsigned int *)(addr)) = 0;
324 #    endif
325 #    define GC_CLEAR_DEFINED
326 #  endif /* !GC_CLEAR_DEFINED */
327
328 #  if !defined(GC_TEST_AND_SET_DEFINED)
329 #    define USE_PTHREAD_LOCKS
330 #  endif
331
332 #  if defined(GC_PTHREADS) && !defined(GC_SOLARIS_THREADS) \
333       && !defined(GC_IRIX_THREADS) && !defined(GC_WIN32_THREADS)
334 #    define NO_THREAD (pthread_t)(-1)
335 #    include <pthread.h>
336 #    if defined(PARALLEL_MARK) 
337       /* We need compare-and-swap to update mark bits, where it's       */
338       /* performance critical.  If USE_MARK_BYTES is defined, it is     */
339       /* no longer needed for this purpose.  However we use it in       */
340       /* either case to implement atomic fetch-and-add, though that's   */
341       /* less performance critical, and could perhaps be done with      */
342       /* a lock.                                                        */
343 #     if defined(GENERIC_COMPARE_AND_SWAP)
344         /* Probably not useful, except for debugging.   */
345         /* We do use GENERIC_COMPARE_AND_SWAP on PA_RISC, but we        */
346         /* minimize its use.                                            */
347         extern pthread_mutex_t GC_compare_and_swap_lock;
348
349         /* Note that if GC_word updates are not atomic, a concurrent    */
350         /* reader should acquire GC_compare_and_swap_lock.  On          */
351         /* currently supported platforms, such updates are atomic.      */
352         extern GC_bool GC_compare_and_exchange(volatile GC_word *addr,
353                                                GC_word old, GC_word new_val);
354 #     endif /* GENERIC_COMPARE_AND_SWAP */
355 #     if defined(I386)
356 #      if !defined(GENERIC_COMPARE_AND_SWAP)
357          /* Returns TRUE if the comparison succeeded. */
358          inline static GC_bool GC_compare_and_exchange(volatile GC_word *addr,
359                                                        GC_word old,
360                                                        GC_word new_val) 
361          {
362            char result;
363            __asm__ __volatile__("lock; cmpxchgl %2, %0; setz %1"
364                 : "+m"(*(addr)), "=r"(result)
365                 : "r" (new_val), "a"(old) : "memory");
366            return (GC_bool) result;
367          }
368 #      endif /* !GENERIC_COMPARE_AND_SWAP */
369        inline static void GC_memory_barrier()
370        {
371          /* We believe the processor ensures at least processor */
372          /* consistent ordering.  Thus a compiler barrier       */
373          /* should suffice.                                     */
374          __asm__ __volatile__("" : : : "memory");
375        }
376 #     endif /* I386 */
377
378 #     if defined(POWERPC)
379 #      if !defined(GENERIC_COMPARE_AND_SWAP)
380         /* Returns TRUE if the comparison succeeded. */
381         inline static GC_bool GC_compare_and_exchange(volatile GC_word *addr,
382             GC_word old, GC_word new_val) 
383         {
384             int result, dummy;
385             __asm__ __volatile__(
386                 "1:\tlwarx %0,0,%5\n"
387                   "\tcmpw %0,%4\n"
388                   "\tbne  2f\n"
389                   "\tstwcx. %3,0,%2\n"
390                   "\tbne- 1b\n"
391                   "\tsync\n"
392                   "\tli %1, 1\n"
393                   "\tb 3f\n"
394                 "2:\tli %1, 0\n"
395                 "3:\t\n"
396                 :  "=&r" (dummy), "=r" (result), "=p" (addr)
397                 :  "r" (new_val), "r" (old), "2"(addr)
398                 : "cr0","memory");
399             return (GC_bool) result;
400         }
401 #      endif /* !GENERIC_COMPARE_AND_SWAP */
402         inline static void GC_memory_barrier()
403         {
404             __asm__ __volatile__("sync" : : : "memory");
405         }
406 #     endif /* POWERPC */
407
408 #     if defined(IA64)
409 #      if !defined(GENERIC_COMPARE_AND_SWAP)
410          inline static GC_bool GC_compare_and_exchange(volatile GC_word *addr,
411                                                        GC_word old,
412                                                        GC_word new_val) 
413          {
414            return __sync_bool_compare_and_swap (addr, old, new_val);
415          }
416 #      endif /* !GENERIC_COMPARE_AND_SWAP */
417 #      if 0
418         /* Shouldn't be needed; we use volatile stores instead. */
419         inline static void GC_memory_barrier()
420         {
421           __sync_synchronize ();
422         }
423 #      endif /* 0 */
424 #     endif /* IA64 */
425 #     if defined(ALPHA)
426 #      if !defined(GENERIC_COMPARE_AND_SWAP)
427 #        if defined(__GNUC__)
428            inline static GC_bool GC_compare_and_exchange(volatile GC_word *addr,
429                                                          GC_word old, GC_word new_val) 
430            {
431              unsigned long was_equal;
432              unsigned long temp;
433
434              __asm__ __volatile__(
435                              "1:     ldq_l %0,%1\n"
436                              "       cmpeq %0,%4,%2\n"
437                              "       mov %3,%0\n"
438                              "       beq %2,2f\n"
439                              "       stq_c %0,%1\n"
440                              "       beq %0,1b\n"
441                              "2:\n"
442                              "       mb\n"
443                              :"=&r" (temp), "=m" (*addr), "=&r" (was_equal)
444                              : "r" (new_val), "Ir" (old)
445                              :"memory");
446              return was_equal;
447            }
448 #        else /* !__GNUC__ */
449            inline static GC_bool GC_compare_and_exchange(volatile GC_word *addr,
450                                                          GC_word old, GC_word new_val) 
451           {
452             return __CMP_STORE_QUAD(addr, old, new_val, addr);
453           }
454 #        endif /* !__GNUC__ */
455 #      endif /* !GENERIC_COMPARE_AND_SWAP */
456 #      ifdef __GNUC__
457          inline static void GC_memory_barrier()
458          {
459            __asm__ __volatile__("mb" : : : "memory");
460          }
461 #      else
462 #        define GC_memory_barrier() asm("mb")
463 #      endif /* !__GNUC__ */
464 #     endif /* ALPHA */
465 #     if defined(S390)
466 #      if !defined(GENERIC_COMPARE_AND_SWAP)
467          inline static GC_bool GC_compare_and_exchange(volatile C_word *addr,
468                                          GC_word old, GC_word new_val)
469          {
470            int retval;
471            __asm__ __volatile__ (
472 #            ifndef __s390x__
473                "     cs  %1,%2,0(%3)\n"
474 #            else
475                "     csg %1,%2,0(%3)\n"
476 #            endif
477              "     ipm %0\n"
478              "     srl %0,28\n"
479              : "=&d" (retval), "+d" (old)
480              : "d" (new_val), "a" (addr)
481              : "cc", "memory");
482            return retval == 0;
483          }
484 #      endif
485 #     endif
486 #     if !defined(GENERIC_COMPARE_AND_SWAP)
487         /* Returns the original value of *addr. */
488         inline static GC_word GC_atomic_add(volatile GC_word *addr,
489                                             GC_word how_much)
490         {
491           GC_word old;
492           do {
493             old = *addr;
494           } while (!GC_compare_and_exchange(addr, old, old+how_much));
495           return old;
496         }
497 #     else /* GENERIC_COMPARE_AND_SWAP */
498         /* So long as a GC_word can be atomically updated, it should    */
499         /* be OK to read *addr without a lock.                          */
500         extern GC_word GC_atomic_add(volatile GC_word *addr, GC_word how_much);
501 #     endif /* GENERIC_COMPARE_AND_SWAP */
502
503 #    endif /* PARALLEL_MARK */
504
505 #    if !defined(THREAD_LOCAL_ALLOC) && !defined(USE_PTHREAD_LOCKS)
506       /* In the THREAD_LOCAL_ALLOC case, the allocation lock tends to   */
507       /* be held for long periods, if it is held at all.  Thus spinning */
508       /* and sleeping for fixed periods are likely to result in         */
509       /* significant wasted time.  We thus rely mostly on queued locks. */
510 #     define USE_SPIN_LOCK
511       extern volatile unsigned int GC_allocate_lock;
512       extern void GC_lock(void);
513         /* Allocation lock holder.  Only set if acquired by client through */
514         /* GC_call_with_alloc_lock.                                        */
515 #     ifdef GC_ASSERTIONS
516 #        define LOCK() \
517                 { if (GC_test_and_set(&GC_allocate_lock)) GC_lock(); \
518                   SET_LOCK_HOLDER(); }
519 #        define UNLOCK() \
520                 { GC_ASSERT(I_HOLD_LOCK()); UNSET_LOCK_HOLDER(); \
521                   GC_clear(&GC_allocate_lock); }
522 #     else
523 #        define LOCK() \
524                 { if (GC_test_and_set(&GC_allocate_lock)) GC_lock(); }
525 #        define UNLOCK() \
526                 GC_clear(&GC_allocate_lock)
527 #     endif /* !GC_ASSERTIONS */
528 #     if 0
529         /* Another alternative for OSF1 might be:               */
530 #       include <sys/mman.h>
531         extern msemaphore GC_allocate_semaphore;
532 #       define LOCK() { if (msem_lock(&GC_allocate_semaphore, MSEM_IF_NOWAIT) \
533                             != 0) GC_lock(); else GC_allocate_lock = 1; }
534         /* The following is INCORRECT, since the memory model is too weak. */
535         /* Is this true?  Presumably msem_unlock has the right semantics?  */
536         /*              - HB                                               */
537 #       define UNLOCK() { GC_allocate_lock = 0; \
538                           msem_unlock(&GC_allocate_semaphore, 0); }
539 #     endif /* 0 */
540 #    else /* THREAD_LOCAL_ALLOC  || USE_PTHREAD_LOCKS */
541 #      ifndef USE_PTHREAD_LOCKS
542 #        define USE_PTHREAD_LOCKS
543 #      endif
544 #    endif /* THREAD_LOCAL_ALLOC */
545 #   ifdef USE_PTHREAD_LOCKS
546 #      include <pthread.h>
547        extern pthread_mutex_t GC_allocate_ml;
548 #      ifdef GC_ASSERTIONS
549 #        define LOCK() \
550                 { GC_lock(); \
551                   SET_LOCK_HOLDER(); }
552 #        define UNLOCK() \
553                 { GC_ASSERT(I_HOLD_LOCK()); UNSET_LOCK_HOLDER(); \
554                   pthread_mutex_unlock(&GC_allocate_ml); }
555 #      else /* !GC_ASSERTIONS */
556 #        if defined(NO_PTHREAD_TRYLOCK)
557 #          define LOCK() GC_lock();
558 #        else /* !defined(NO_PTHREAD_TRYLOCK) */
559 #        define LOCK() \
560            { if (0 != pthread_mutex_trylock(&GC_allocate_ml)) GC_lock(); }
561 #        endif
562 #        define UNLOCK() pthread_mutex_unlock(&GC_allocate_ml)
563 #      endif /* !GC_ASSERTIONS */
564 #   endif /* USE_PTHREAD_LOCKS */
565 #   define SET_LOCK_HOLDER() GC_lock_holder = pthread_self()
566 #   define UNSET_LOCK_HOLDER() GC_lock_holder = NO_THREAD
567 #   define I_HOLD_LOCK() (pthread_equal(GC_lock_holder, pthread_self()))
568     extern VOLATILE GC_bool GC_collecting;
569 #   define ENTER_GC() GC_collecting = 1;
570 #   define EXIT_GC() GC_collecting = 0;
571     extern void GC_lock(void);
572     extern pthread_t GC_lock_holder;
573 #   ifdef GC_ASSERTIONS
574       extern pthread_t GC_mark_lock_holder;
575 #   endif
576 #  endif /* GC_PTHREADS with linux_threads.c implementation */
577 #  if defined(GC_IRIX_THREADS)
578 #    include <pthread.h>
579      /* This probably should never be included, but I can't test        */
580      /* on Irix anymore.                                                */
581 #    include <mutex.h>
582
583      extern volatile unsigned int GC_allocate_lock;
584         /* This is not a mutex because mutexes that obey the (optional)         */
585         /* POSIX scheduling rules are subject to convoys in high contention     */
586         /* applications.  This is basically a spin lock.                        */
587      extern pthread_t GC_lock_holder;
588      extern void GC_lock(void);
589         /* Allocation lock holder.  Only set if acquired by client through */
590         /* GC_call_with_alloc_lock.                                        */
591 #    define SET_LOCK_HOLDER() GC_lock_holder = pthread_self()
592 #    define NO_THREAD (pthread_t)(-1)
593 #    define UNSET_LOCK_HOLDER() GC_lock_holder = NO_THREAD
594 #    define I_HOLD_LOCK() (pthread_equal(GC_lock_holder, pthread_self()))
595 #    define LOCK() { if (GC_test_and_set(&GC_allocate_lock)) GC_lock(); }
596 #    define UNLOCK() GC_clear(&GC_allocate_lock);
597      extern VOLATILE GC_bool GC_collecting;
598 #    define ENTER_GC() \
599                 { \
600                     GC_collecting = 1; \
601                 }
602 #    define EXIT_GC() GC_collecting = 0;
603 #  endif /* GC_IRIX_THREADS */
604 #  if defined(GC_WIN32_THREADS)
605 #    if defined(GC_PTHREADS)
606 #      include <pthread.h>
607        extern pthread_mutex_t GC_allocate_ml;
608 #      define LOCK()   pthread_mutex_lock(&GC_allocate_ml)
609 #      define UNLOCK() pthread_mutex_unlock(&GC_allocate_ml)
610 #    else
611 #      include <windows.h>
612        GC_API CRITICAL_SECTION GC_allocate_ml;
613 #      define LOCK() EnterCriticalSection(&GC_allocate_ml);
614 #      define UNLOCK() LeaveCriticalSection(&GC_allocate_ml);
615 #    endif
616 #  endif
617 #  ifndef SET_LOCK_HOLDER
618 #      define SET_LOCK_HOLDER()
619 #      define UNSET_LOCK_HOLDER()
620 #      define I_HOLD_LOCK() FALSE
621                 /* Used on platforms were locks can be reacquired,      */
622                 /* so it doesn't matter if we lie.                      */
623 #  endif
624 # else /* !THREADS */
625 #    define LOCK()
626 #    define UNLOCK()
627 # endif /* !THREADS */
628 # ifndef SET_LOCK_HOLDER
629 #   define SET_LOCK_HOLDER()
630 #   define UNSET_LOCK_HOLDER()
631 #   define I_HOLD_LOCK() FALSE
632                 /* Used on platforms were locks can be reacquired,      */
633                 /* so it doesn't matter if we lie.                      */
634 # endif
635 # ifndef ENTER_GC
636 #   define ENTER_GC()
637 #   define EXIT_GC()
638 # endif
639
640 # ifndef DCL_LOCK_STATE
641 #   define DCL_LOCK_STATE
642 # endif
643 # ifndef FASTLOCK
644 #   define FASTLOCK() LOCK()
645 #   define FASTLOCK_SUCCEEDED() TRUE
646 #   define FASTUNLOCK() UNLOCK()
647 # endif
648
649 #endif /* GC_LOCKS_H */